PDF associated:
/Standard_Flyers/st10235idc-feb14_jtf_id-clonetool.pdf
JUST THE FACTS StandardBrand com IntermotorImport com ST10235IDC FEB14 TPMS Identification Cloning Tool Use Identification Cloning Tool Specifications Dimensions 143mm x 88mm x 35mm Battery 9V Display 2 line LCD 30mm x 15 mm Weight 255g Temperatures Operational 5 C to 45 C 41 F to 113 F Storage 0 C to 60 C 32 F to 140 F Relative humidity 70 80 The Cloning Process can be completed by following these 3 easy steps Step 2 Place the new clone able sensor in the holding tray of the TechSmart T55000 Cloning Tool Enter the ID Number from the old sensor and press ENTER Step 3 Write the cloned ID on the sticker provided with the new sensor Affix sticker to the back of the new sensor Cloning is now complete It really is that easy ID number Step 1 Locate the ID number on the old sensor Properly Dispose of Old Sensor NOTE Old sensors will transmit signals and may interfere with new replacement sensors and the vehicle s TPMS light may trigger To avoid this place old sensors in aluminum foil or remove from TPMS staging area The TPMS Identification Cloning Tool interacts with the tire pressure sensor through wireless radio frequency communication to write the sensor identification number onto our Clone able replacement sensors
