PDF associated:
/Roller Bearings.pdf
R
O
L
L
B
E
R
B
B
E
A
R
I
N
G
S
B ROLLER BEARINGS
Part Numbering Systems.............................................................B3
Tapered Roller Bearings ...........................................................B15
Radial Cylindrical Roller Bearings .......................................B325
Spherical Roller Bearings ......................................................B351
Spherical Roller Bearing Pillow Blocks .............................B383
Spherical Plain Bearings ........................................................B415
Thrust Roller Bearings.............................................................B435
Auxiliary Parts ..........................................................................B467
TIMKEN PRODUCTS CATALOG B
TIMKEN SERVICE CATALOG
•
B
A
R
I
N
G
S
E
R
B
E
Caption:
L
L
B
T
C
O
R
D
B
d
a
•
B TIMKEN PRODUCTS CATALOG
TIMKEN SERVICE CATALOG
• • •
• • •
Part Numbering Systems
TAPERED ROLLER BEARINGS
Overv ew: Timken offers the most extensive line of tapered roller bearings in the world. Tapered roller bearings consist of four interdependent components: the cone (inner ring), the cup (outer ring), the tapered rollers (rolling elements) and the cage (roller retainer). Tapered bearings are uniquely designed to manage both thrust and radial loads on rotating shafts. The steeper the cup angle, the greater the ability of the bearing to handle thrust loads.
• S zes: 8 mm (0.31496 in.) bore to 2222.5 mm (87.5 in.) outside diameter (O.D.).
• Markets: Automotive, industrial, rail, rolling mills, crane wheels, sheaves.
• Features: Available in single-, double- and four-row con?gurations. Customized surface geometries and coatings are available.
• Bene?ts: Enhanced performance in demanding applications.
B
Caption:
Caption:
PAGE
Part Numbering Systems......................B3
Type TS ..................................................B15
Type TSF ..............................................B195
Type TDO .............................................B237
Type TDI ...............................................B297
IsoClassTM Series ...............................B311
Caption:
FPO
Caption:
Caption:
Caption:
FPO
TIMKEN PRODUCTS CATALOG B
•
R
O
Caption:
L
L
E
R
B
B
E
A
R
Caption:
I
N
G
S
Caption:
•
B TIMKEN PRODUCTS CATALOG
Part Numbering Systems
HOW TO RECOGNIZE YOUR PART NUMBER
The part numbering systems for single-row tapered roller bearings (type TS) are internationally recognized. Several part number systems have been developed that can be classi?ed according to “metric” or “inch” systems. Within both the metric and inch systems, different part number systems have been developed. Inch system bearings are normally assigned individual part numbers for the inner race and outer races, whereas ISO bearings are assigned a unique part number for the bearing assembly (inner race and outer race).
BEARING SERIES
In all the part numbering systems the term “bearing series” is used to describe bearings having the same basic internal geometry (e.g. roller size, included inner race and outer race angle). Any inner race (including roller set) can be matched with any outer race within the same series providing that the same type of bearing is being used.
INCH PART NUMBERING SYSTEMS ORIGINAL INCH PART NUMBERING SYSTEM
The original system developed by The Timken Company was based on a family of bearings designed around a common roller. Varying the number of rollers and the angle of the raceways allows different bearings to be designed for predominant radial load (shallow angle) or thrust load (steep angle).
For example, all the tapered roller bearings in the 500 family use the same roller. However, the 595 Series has a steep angle and 24 rollers while the 525 Series has a shallow angle and 15 rollers.
Individual part numbers are assigned to the inner race and outer races. Although there are exceptions, the general rule is that the outer race has a part number that is lower than the series number, whereas the inner race is assigned a higher number.
B
Caption:
For example:
Series 575 Outer race 572 Inner race 576
INCH
METRIC
ISO 55
ORIGINAL ABMA
J-LINE ORIGINAL METRIC NEW METRIC
< Individual part number for inner and outer race > < Part number describes inner and outer race >
SYMBOLS
d = bearing bore diameter
D = bearing outside diameter
T = bearing width
B = inner race width
C = outer race width
E = outer race small inside diameter
a = 1/2 included outer race contact angle r1 = inner race back face radius height
r2 = inner race back face radius width
r3 = outer race back face radius height
r4 = outer race back face radius width
r5 = inner race and outer race front face chamfer height and width
a
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
ABMA INCH PART NUMBERING SYSTEM
HM 5 2 2 6 4 9 - - -
B
Section 1 Duty
Section 2 Angularity
Section 3 Basic series indications
Section 4 Component designator
Section 5 Modi?cation suf?x
Caption:
Sect on - Bas c Ser es Ind cat on
The 2nd, 3rd, and 4th digits following the pre?x letters are reserved for the basic series indication.
The selection of the basic series indication in relation to the maximum theoretical bore of the bearing will then be in accordance with the following tabulation:
Max mum Ser es Ind cat on Max mum Ser es Ind cat on Bore Range
Bore Range
A new inch part numbering system was developed by the American Bearing Manufacturers Association (ABMA) to address the expansion in the number of new applications and tapered roller bearing designs. This part numbering system has become the international standard for inch-sized bearings.
The ABMA part numbering system applies to new bearing seriesonly. Existing part numbers according to the original system, new part numbers that are added to the existing series and proprietary part numbers of special bearings continue to be used.
The new part number is divided into 5 alpha-numeric sections:
Sect on - Pre?x Letters
The pre?xes will consist of one or two letters and will designate the duty class for which the bearing is designed.
EL Extra Light HM Heavy Medium LL Lighter than Light H Heavy
L Light
HH Heavier than Heavy LM Light Medium EH Extra Heavy
M Medium T Thrust only
Sect on - Angular ty Des gnator
The ?rst digit following the pre?x will represent the angle coding as determined by the included angle of the outer race.
Included Outer race Angle
Code
0 to 23° 59’ 59.99’’
1
24° to 25° 29’ 59.99’’
2
25° 30’ to 26° 59’ 59.99’’
3
27° to 28° 29’ 59.99’’
4
28° 30’ to 30° 29’ 59.99’’
5
30° 30’ to 32° 29’ 59.99’’
6
32° 30’ to 35° 59’ 59.99’’
7
36° to 44° 59’ 59.99’’
8
45° Up, but not thrust only 9 90° Thrust bearing only 0
( nches)
( nches)
0 - 1 00 to 19 incl. 15 - 16 640 to 659 incl.
1 - 2 20 to 99 incl. 16 - 17 660 to 679 incl.
000 to 029 incl. 17 - 18 680 to 694 incl. 2 - 3 030 to 129 incl. 18 - 19 695 to 709 incl. 3 - 4 130 to 189 incl. 19 - 20 710 to 724 incl. 4 - 5 190 to 239 incl. 20 - 21 725 to 739 incl. 5 - 6 240 to 289 incl. 21 - 22 740 to 754 incl. 6 - 7 290 to 339 incl. 22 - 23 755 to 769 incl. 7 - 8 340 to 389 incl. 23 - 24 770 to 784 incl. 8 - 9 390 to 429 incl. 24 - 25 785 to 799 incl. 9 - 10 430 to 469 incl. 25 - 30 800 to 829 incl. 10 - 11 470 to 509 incl. 30 - 35 830 to 859 incl. 11 - 12 510 to 549 incl. 35 - 40 860 to 879 incl. 12 - 13 550 to 579 incl. 40 - 50 880 to 889 incl. 13 - 14 580 to 609 incl. 50 - 72.5 890 to 899 incl. 14 - 15 610 to 639 incl. 72.5 and over 900 to 999 incl.
Sect on - Component Des gnator
The 5th and 6th digits, or the last two digits, following the pre?x letters will indicatethe actual part number of the bearing component.
Outer race numbers will beindicated by the digits 10 to 19, inclusive, the ?rst outer race made to minimum section in any series starting with the number 10. If more than 10 outer races appear in any series, numbers 20 to 29 will be utilized where available.
Inner race numbers will be indicated by the digits 30 to 49, inclusive, the ?rst inner race made to minimum section in any series being numbered 49.
Sect on 5 - Suf?x
This will consist of one letter to three letters in pre-arranged combinations, indicating modi?cations in external form or internal arrangement.
•
B TIMKEN PRODUCTS CATALOG
Part Numbering Systems
PREFIXES AND SUFFIXES
Some of the symbols used by The Timken Company and pre?xes and suf?xes that are part of the ABMA part numbering standard:
PREFIX SUFFIX INNER RACE OR OUTER RACE
EXPLANATION
A Inner race & Outer race Standard basic series part number.
A Inner race
Different radius from basic part number.
B
A Inner race
Different bore from basic part number.
A Inner race
Different complement of rollers.
A Outer race
Different O.D. from basic part number.
A Outer race
Different radius from basic part number.
A Outer race
Different width from basic part number.
AA Inner race & Outer race Different bore, O.D., width or radius from basic part number. AB Inner race
Caption:
Different bore, width or radius from basic part number, assembled with brass cage.
AB Outer race
Flanged outer race. (Non-interchangeable with basic part number.)
AC Inner race
Different bore or radius, different internal geometry.
AC Outer race
Different O.D., width or radius from basic part number.
AD Outer race
Double Outer race. (Non-interchangeable with basic part number.)
ADW Inner race
Double Inner race. Pilots and slots each end, holes in large rib.
AH Inner race
Assembled with special cage, rollers, and/or internal geometry
AL Inner race
Assembled with Duo-Face seal.
Single outer race with snap ring groove in O.D.
AS Inner race & Outer race Different bore, O.D., width, or radius from basic part number. ASB Inner race
Single inner race, different bore or width from basic part number, assembled with brass cage.
AV Inner race & Outer race Made of special steel.
AW Inner race & Outer race Keyway or slotted inner race or outer race.
AX Inner race & Outer race Different bore, O.D., width, or radius from basic part number.
AXB Inner race
Different bore, width, or radius from basic part number, assembled with brass cage.
ARB Outer race
ISO outer race - double outer race without oil holes or groove.
AXV Inner race & Outer race Different O.D., width, or radius from basic part number. Made of special steel. AXX Inner race & Outer race Different O.D., width, or radius from basic part number. Made of special steel. B Outer race
Flanged outer race. (Non-interchangeable with basic part number.)
AXD Outer race
Inner race using brass cage.
B Inner race & Outer race ISO bearing with same boundary dimensions as basic part number, but with different
internal geometry, steeper included outer race angle.
B Inner race
BA Outer race
Flanged outer race. (Non-interchangeable with basic part number.)
ISO inner race used in assemblies with 2 inner races mated with double outer race to form a double row non-adjusting bearing. (Non-interchangeable with other inner races having the same basic part numbers, which may vary in bore or width dimensions.)
BNA Inner race
BR Outer race
Single outer race with groove in O.D. for snap ring.
BS Outer race
Flanged outer race. (Non-interchangeable with basic part number.)
BW Outer race
Flanged outer race with slot. (Non-interchangeable with basic part number.)
BX Outer race
Flanged Outer race. (Non-interchangeable with basic part number.)
BXX Outer race
Flanged single outer race. Made of special steel.
C Inner race
Single inner race, envelope dimensions same as basic part number, different internal geometry.
C Outer race
Dimensionally different from basic part number. (Non-interchangeable.)
CA Inner race
Single inner race, envelope dimensions same as basic part number, different internal geometry.
CB Inner race
Single inner race, dimensionally different from basic part number.
CD Outer race
Double outer race with oil holes and groove. One hole counter-bored for locking pin.
CE Outer race
Dimensionally different from basic part number. (Non-interchangeable.)
CN Outer race
Neoprene cushioned outer race.
TIMKEN PRODUCTS CATALOG B5
•
ROLLER BEARINGS
CP Inner race & outer race Flash chrome plated. Otherwise, interchangeable with basic part number
CP Inner race & outer race Envelope dimensions same as basic part number, different internal geometry,
customized for performance.
CR Inner race & outer race Ribbed outer race bearing series.
CS Inner race & outer race Dimensionally different from basic part number. (Non-interchangeable.) CX Inner race
Dimensionally different from basic part number. (Non-interchangeable.)
D Inner race & outer race Double inner race or Double outer race. (Non-interchangeable with basic part number.) DA Inner race
Double inner race. (Non-interchangeable with inner races having same basic part number.)
Spherical O.D. double outer race. (Non-interchangeable with basic part number or other double outer races having same basic numbers.)
Double outer race with ?ange. (Non-interchangeable with basic part number or double outer races having same basic numbers.)
Double inner race assembled with brass cages.
DC Outer race
Double outer race with hole for locking pin.
DD Inner race & outer Race Special long double inner race or outer race. (Non-interchangeable with basic part number or
other double parts having same basic numbers.)
DE Inner race & outer race Double inner race or double outer race having different dimensions or other characteristics
from single and double parts identi?ed with same basic part number.
DF Outer race
DG Inner race
DGA Inner race
DGE Inner race
DGH Inner Race
DGW Inner race
DH Inner race
DP Inner race
DR Outer race
DRB Outer race
DS Outer race
DT Outer race
DV Inner race & outer race Double inner race or double outer race made of special steel. DVH Inner race
Double inner race, special steel, and/or internal geometry.
DW Inner race & outer race Double inner race or double outer race with keyway or slot. (Non-interchangeable with
inner races or outer races identi?ed with same basic part numbers.)
Double inner race with one end extended and with oil slots in extended end. (Asymmetrical)
Double inner race with oil slots, assembled with special cage, rollers, and/or internal geometry.
DWV Inner race & outer race Double inner race or double outer race with keyway or slot. (Non-interchangeable with inner races or outer races identi?ed with same basic part numbers.) Made of special steel.
DX Outer race
Adaptor for spherical or straight O.D. outer race.
DX Outer race
B TIMKEN PRODUCTS CATALOG
Caption:
PREFIX SUFFIX INNER RACE OR OUTER RACE
EXPLANATION
B
DA Outer race
Caption:
DB Outer race
DB Inner race
Double outer race with oil holes and groove. Snap ring groove on O.D..
Double inner race with pressure removal groove or helical groove in bore.
Double inner race with pressure removal groove or helical groove in bore. (Non-interchangeable with basic part number.)
Double inner race with pressure removal groove or helical groove in bore. (Non-interchangeable with basic part number.)
Double inner race with presure removal groove or helical groove in bore and with special cage, rollers, and/or internal geometry.
Double inner race with pressure removal groove or helical groove in bore, and having face slots.
Double inner race with special cage, rollers, and/or internal geometry.
Double inner race with puller groove.
Double outer race for ribbed outer race series. (Non-interchangeable with single and double outer races identi?ed with same basic part number.)
Double outer race with snap ring groove.
Crowned O.D. double outer race. (Non-interchangeable with other outer races having same basic part numbers.)
Tapered O.D. double outer race. (Non-interchangeable with other outer races having same basic part numbers.)
DWA Inner race
DWH Inner race
Threaded O.D. double outer race. (Non-interchangeable with outer races identi?ed with same basic part numbers.)
DXX Inner race & outer race Double inner race or double outer race made of special steel.
E Inner race & outer race Inner races or outer races having special characteristics differing from and non-
interchangeable with other inner races or outer races identi?ed with the same
•
Part Numbering Systems
Double outer races. (Non-interchangeable with other outer races identi?ed with same basic part numbers.)
Outer race Double outer races, special hole in O.D. for locking pin.
Large and small ribs - close guided rollers. (Non-interchangeable with other inner races identi?ed with same basic part numbers.)
EH Inner race & outer race Extra heavy series. EL Inner race & Outer race Extra light series. EX Inner race & outer race Experimental.
EXX Inner race & outer race Inner races or outer races having special characteristics differing from and non- interchangable with other inner races or outer races identi?ed with the same basic
part numbers. Made of special steel.
F Inner race
Assembled with polymer cage.
FL Inner race & outer race ‘Free lateral’ series, no large or small ribs. FX Inner race & outer race Factory identi?cation number only.
G Inner race
Retainer groove in bore.
H Inner race & outer race Heavy series. (Non-interchangeable with other inner races and outer races identi?ed with
same basic part numbers.)
Assembled with special cage, rollers, and/or internal geometry.
Assembled with special cage, rollers, and/or internal geometry. Made of special steel.
HH Inner race & Outer race Heavy-Heavy series. (Non-interchangeable with other inner races and outer
races identi?ed with same basic part numbers.)
HM Inner race & outer race Heavy-Medium series. (Non-interchangeable with other inner races outer races identi?ed
with same basic part numbers.)
Assembled with special cage and/or roller, different internal geometry. Customized for performance.
HR Outer race
Special outer race used in ‘Hydra-Rib’ bearing.
J Inner race & outer race Used alone or with other pre?x letters to indicate metric bore and/or O.D.. JC Inner race & outer race Metric Series.
JD Inner race & outer race Metric Series.
JE Inner race & outer race Metric Series.
JF Inner race & outer race Metric Series.
JG Inner race & outer race Metric Series.
JN Inner race & outer race Metric Series.
JP Inner race & outer race Metric Series.
JR Inner race & outer race Metric Series.
JRM Inner race & outer race Metric Series, UNIPAC bearing.
JS Inner race & outer race Metric Series.
JT Inner race & outer race Metric Series.
JU Inner race & outer race Metric Series.
JW Inner race & outer race Metric Series.
K Outer race
Double outer race with heavy section. May have unusual features such as ?ange, tapered O.D., etc.
K Inner race & outer race Through hardened components, Non-DIN 720 Part Numbers
K Miscellaneous K pre?x with 5 or 6 digits following also used for miscellaneous components (seals,
bolts, ?ller rings, etc.)
KP Thrust Bearing Cadmium plated.
L Inner race & outer race Light series. (Non-interchangeable with other inner races and outer races identi?ed with same basic part numbers.)
L Inner race
Inner race assembled with Duo-Face seal.
L Outer race
PREFIX SUFFIX INNER RACE OR OUTER RACE
EXPLANATION
basic part numbers.
ED Outer race
EDC
EE Inner race
B
Caption:
H Inner race
HV Inner race
HP Inner race
Loose rib. (Part of Unit-Bearing.)
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
PREFIX SUFFIX INNER RACE OR OUTER RACE
EXPLANATION
LA Inner race
Inner race assembled with Duo-Face-Plus seal.
LA, LB, Seal
These suf?xes are used on a basic Duo-Face-Plus seal number to identify the assembly
resulting from the use of the seal with various inner races in the series.
LL Inner race & outer race Light-Light series.
LM Inner race & outer race Light-Medium series.
M Inner race & outer race Medium series.
M Inner race & outer race Through hardened components, DIN 720 Part Numbers, IsoClass Part Numbers
N Inner race
Bock or Gilliam type bearings.
LC, etc.
B
Two inner races mated with double outer race to form double row non-adjustable bearing. (Non-interchangeable with other inner races having same basic part numbers which may vary in bore, O.D., and width dimensions.)
NA NA Inner race
NA Outer race
Etched electric pencil on double outer races mated with two ‘NA’ type single inner races to form double row non-adjustable bearings.
Caption:
NAV Inner race
‘NA’ inner race made of special steel.
NC Outer race
Cushioned outer race (usually neoprene.)
Tapered or threaded bore.
NP Inner race & outer race Used with random numbers for product differentiation.
NR Inner race
‘NA’ type ribless inner race for ribbed outer race series.
NI Inner race
NW Inner race
‘NA’ type inner race with slotted front face.
NWV Inner race
‘NA’ type inner race with slotted front face. Made of special steel.
NX Inner race
Lapped front face.
P Inner race
Puller groove.
P Inner race & outer race Customized for performance.
R Inner race & outer race Gilliam replacement series. (Non-interchangeable with other inner races and outer races identi?ed with same basic numbers.)
R Inner race & outer race Special feature bearing. (Non-interchangeable with bearings having the same basic part numbers.)
R Inner race & outer race Bock type bearing.
R Inner race
Basic part number with polymer lubricant.
Snap ring on O.D.
RC Inner race & outer race Special ribbed outer race bearing.
RN Various
RB Outer race
Used with random numbers, not to exceed six (6) digits, for purchased items that are distributed by Timken.
RR Inner race & outer race ‘Relieved race.’
S Inner race & outer race Special feature bearing. (Non-interchangable with bearings having same basic
part numbers.)
SA Inner race & outer race Special feature bearing. (Non-interchangable with bearings having same basic
part numbers.)
SB Inner race
Assembled with brass cage.
SB Outer race
Flanged outer race.
SC Inner race
With square bore.
SD Inner race & outer race Double inner race with square bore or double outer race. SH Inner race
Special feature bearing, with special cage, rollers, and/or internal geometry. (Non-interchangeable with bearings having same basic part numbers.)
SL Thrust bearing Basic part number with polymer lubricant.
SR Inner race
Different radius from basic part numbers.
SW Inner race & outer race Slot or keyway. (Non-interchangeable with bearings having same basic part numbers.) SWB Inner race
Slot or keyway assembled with brass cage. (Non-interchangeable with bearings having same basic part numbers.)
SWV Inner race
Slot or keyway made of special steel. (Non-interchangable with bearings having same basic part numbers.)
•
B TIMKEN PRODUCTS CATALOG
Part Numbering Systems
PREFIX SUFFIX INNER RACE OR OUTER RACE
EXPLANATION
SX Outer race
Special feature bearing. (Non-interchangeable with bearings having same basic part numbers.)
T Race
Thrust bearing assemblies.
T Outer race
Double outer race with heavy section. May have unusual feature such as ?ange, tapered O.D., etc.
T Inner race
Tapered bore.
B
T Outer race
Tapered O.D.
TA Inner race
Tapered bore ‘NA’ type inner race.
TA Outer race
Tapered O.D.
TB Inner race
Tapered bore inner race with brass cage.
TC Race
Thrust bearing assembly.
TC Inner race
Tapered bore.
Caption:
TD Inner race
Double with tapered bore.
TDB Inner race
Double with tapered bore, assembled with brass cages.
TDE Inner race
Double with tapered bore and extended rib.
TDG Inner race
Double with tapered bore, pressure removal groove or spiral groove in bore.
TDGV Inner race
Double with tapered bore, pressure removal groove or spiral groove in bore. Made of special steel.
TDH Inner race
Double with tapered bore, special cage, rollers or internal geometry.
TDL Inner race
Double with tapered bore, interlock feature.
TDV Inner race
Double with tapered bore. Made of special steel.
TDW Inner race
Double with tapered bore and slots or keys.
TDXX Inner race
Double with tapered bore. Made of special steel.
TE Inner race
Single, tapered bore, extended large rib.
TEV Inner race
Single, tapered bore, extended large rib. Made of special steel.
TL Inner race
Tapered bore with interlock feature.
TLE Inner race
Tapered bore with interlock feature and extended rib.
TP Inner race
Tapered bore inner race with puller groove.
Tapered bore inner race with puller groove, extended inner race large rib.
TV Inner race & outer race Tapered bore inner race or outer race O.D. Made of special steel.
TW Inner race & outer race Tapered bore inner race or outer race O.D. with slots or keys.
TWE Inner race & outer race Tapered bore inner race or outer race O.D. with locking keyway in front face, extended
inner race large rib or outer race width.
TPE Inner race
TXX Inner race
Tapered bore. Made of special steel.
U Inner race & outer race Basic series part number, unitized, self-contained. U Inner race & outer race Basic series part number, unitized, self-contained. US Inner race & outer race Special close stand.
V Inner race & outer race Special close stand. V Inner race & outer race Made of special steel.
VC Inner race
Special internal geometry. Made of special steel.
VH Inner race
Special cage, rollers, and/or internal geometry. Made of special steel.
W Inner race & outer race Slot(s) or keyway(s).
W Thrust Bearing Oil holes in retainer.
WA Inner race & outer race Slot(s) or keyway(s).
WB Inner race
Slot(s) or keyway(s) with brass cage.
WC Inner race & outer race Slot(s) or keyway(s).
WD Inner race & outer race Double inner race or outer race with slot(s) or keyway(s). WE Inner race & outer race Extended face with slot(s) or keyway(s).
WS Inner race & outer race Slot(s) or keyway(s).
WV Inner race & Outer race Slot(s) or keyway(s). Made of special steel.
TIMKEN PRODUCTS CATALOG B
•
ROLLER BEARINGS
Caption:
PREFIX SUFFIX INNER RACE OR OUTER RACE
EXPLANATION
WXX Inner race & Outer race Slot(s) or keyway(s). Made of special steel.
X Inner race
ISO part number.
X Inner race
B
Slot(s) or keyway(s).
X Inner race & Outer race Special feature bearing. (Non-interchangable with bearings having the same basic
part number.)
X Inner race & Outer race ISO bearing with same boundary dimensions as basic part number but with different
internal geometry, yielding increased rating.
XA Inner race & Outer race Special feature bearing. (Non-interchangeable with bearings having the same basic
part number.)
XAA Inner race
ISO single inner race. (Non-interchangeable with bearings having the same basic part number.)
Caption:
XAB Inner race
ISO single inner race. (Non-interchangeable with bearings having the same basic part number.)
XB Inner race
Different bore, width, or radius, from basic part number. Assembled with brass cage.
Special feature ?anged outer race. (Non-interchangeable with bearings having the same basic part number.)
XC Inner race & Outer race Limited production bearings to which standard series part numbers have not been assigned.
XD Outer race
Double outer race, no oil holes or groove.
XB Outer race
XD Inner race
Double inner race, different bore or width from basic part numbers.
XD Inner race
Double inner race, oil holes in large rib.
XDXP Outer race
Double outer race, no oil holes or groove, special material and process.
XE Outer race
Different bore, width, or radius from basic part number.
XGA Inner race
ISO single inner race. (Non-interchangeable with bearings having the same basic part number.)
XGB Inner race
ISO single inner race. (Non-interchangeable with bearings having the same basic part number.)
XP Inner race
Special steel and process.
XR Inner race & Outer race Crossed roller bearings.
XS Inner race & Outer race Different bore, O.D., width, or radius from basic part number. XV Inner race & Outer race Special feature inner race or outer race made of special steel. XW Inner race
Slotted.
XX Inner race & Outer race Single inner race or single outer race. Made of special steel.
Y Outer race
ISO part number.
YD Outer race
Double outer race with oil holes, no groove.
YDA Outer race
Double outer race with oil holes, no groove. (Non-interchangeable with bearings having the same basic part number.)
YDV Outer race
Double outer race with oil holes, no groove. made of special steel.
YDW Inner race
Double outer race with oil holes, no groove. Slot(s) or keyway(s) in face(s).
YKA Outer race
ISO single outer race. (Non-interchangeable with bearings having the same basic part number.)
YKB Outer race
ISO single outer race. (Non-interchangeable with bearings having the same basic part number.)
YSA Outer race
ISO single outer race. (Non-interchangeable with bearings having the same basic part number.)
Z Inner race & Outer race Close stand part.
•
B 0 TIMKEN PRODUCTS CATALOG
Part Numbering Systems
METRIC PART NUMBERING SYSTEMS J-LINE PART NUMBERS
The “J” pre?x letter is used in conjunction with the ABMA part numbering system to identify metric dimensioned and toleranced inner race and outer races. The bearing series designation does not contain the pre?x letter “J”. J-Line bearings are referred to as inch bearings in metric bore, O.D. and width.
B
J HM 5 2 2 6 4 9 - - -
Section 5 Modi?cation Suf?x
Section 4 Component Designator
Caption:
Section 1 Duty
Section 2 Angularity
Section 3 Basic Series Indications
ISO PART NUMBERING SYSTEM
3 2 1 0
303
313
323
302
322
332
331
330
320
Diameter Series
0 1 2 3
Width Series
The original metric part numbering system for tapered roller bearings was based on the ISO 15 dimensional plan for radialbearings. A 5-digit part number commencing with numeral 3 describes the bearing assembly (inner race and outer races).
Sect on - Symbol for bear ng type
3 always applies to tapered roller bearings.
Sect on - W dth ser es
The bearing width is classi?ed from 0 to 3 in increasing order of width.
Sect on - D ameter ser es
The bearing section height is classi?ed from 0 through 3 in increasing order of O.D. for a given bore size.
Sect on - Inner race bore des gnat on
The 2 last digits relate to the inner race bore diameter that can be calculated by multiplying the number indicated by 5, if the bore diameter is between 20 and 500 mm. For example, bearing
32218 has a 90 mm bore. If the bore diameter is less than 20 mm, the last two digits can interpreted as follows: 00=10 mm, 01=12 mm, 02=15 mm and 03=17 mm. If the bore diameter is greater than 500 mm, then the last 3 digits (preceded by a slash) correspond to the bore size.
3 2 2 1 8
Section 4
Inner race Bore Designation
Section1 Tapered Roller Bearing
Section 2 Width Series
Section 3 Diameter Series
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
NEW ISO 55 PART NUMBERING SYSTEM
Finding that tapered roller bearings did not conform to the ISO 15 general plan, because dimensions given were not found to be optimal, the ISO introduced a new numbering system for tapered roller bearings in ISO 355. This system uses 3 alpha-numeric ?elds to de?ne the bearing series. The bearing part number is then de?ned by adding the inner race diameter in mm after the bearing series. Although all original metric part numbers were assigned a new designation in the ISO 355 plan, the original part number is still used.
B
D ameter Ser es
G
F
E D CB
Caption:
B C D E
B C D E
B C D E
B C D E
W dth Ser es
T 4 C B 100
Symbol for tapered roller bear ngs (opt onal)
Angle
a
Ser es
Des gnat on
over
ncl.
1 Reserved for future use
2
10°
13° 52’
3
13° 52’
15° 59’
4
15° 59’
18° 55’
5
18° 55’
23°
6
23°
27°
7
27°
30°
D ameter
D
Ser es
d 0.
Des gnat on
over
ncl.
A Reserved for future use
B
3.40
3.80
C
3.80
4.40
D
4.40
4.70
E
4.70
5.00
F
5.00
5.60
G
5.60
7.00
W dth
T
Ser es
(D ? d) 0. 5
Des gnat on
over
ncl.
A Reserved for future use
B
0.50
0.68
C
0.68
0.80
D
0.80
0.88
E
0.88
1.00
Bear ng bore d ameter (mm)
•
B TIMKEN PRODUCTS CATALOG
Part Numbering Systems
“NEW” METRIC BEARINGS
A new range of metric bearings were also included in the ISO 355 plan. These new bearings are speci?cally applicationoriented and are designed for optimum performance.
To easily identify these part numbers against the application type, The Timken Company introduced an alpha-numeric part number designation. The part number construction is similar to that of J-Line part numbers and separate numbers are assigned to both inner race and outer races.
J-pre?x
All of the new metric bearings are identi?ed with a J-pre?x that indicates a new metric dimensioned and toleranced bearing.
Sect on - Duty
Indicates application type:
C, D & F = general purpose
N = combination of general purpose and pinion P = high speed
S and T = pinions
W = high axial loads
B
Caption:
COMPARISON TABLE: INCREASE IN SECTION FOR A 55 MM BORE BEARING
Raceway angle
between
mm
100
90 80 55
11° 30’ and
15° 10’
32911 JC5500 32011X 33011 JD5500 33111 30211 32211 (2BC) (2CC) (3CC) (2CE) (2CD) (3CE) (3DB) (3DC)
120 110 100
55
11° 30’ and
15° 10’
33211 JF5500 30311 32311 (3DE) (2ED) (2FB) (2FD)
120 110 100
55
18° 15’ AND 30°
JP5500 JS5500 JT5500 JW5500 JN5500 31311 32311B (4CB) (5DD) (5ED) (7FC) (4FE) (7FB) (5FD)
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
Sect on - Inner race Bore
The inner race bore metric diameter is included in the part number designation of both the inner race and outer races.
Sect on - Component Des gnator
Same identi?cation as in the ABMA part numbering system. For further explanation of prefix and suffix symbols, or proprietary part numbers of special bearings, consult your Timken sales representative.
OPTIMUM BEARING SELECTION: ISO 55
ISO 355 offers many application-speci?c bearing selection options for a given bore. Depending on application and type of load, thrust and/or radial, the bearing with the optimum angle and section can be selected. For example, pinion bearings have a steep angle, whereas bearings for machine tools are generally designed with a shallow angle and a light-section. The previous table demonstrates this feature for 55 mm bore bearings.
BEARING ASSEMBLY NUMBERS
Multiple-row bearings and matched bearing assemblies are assigned a 5-digit alpha-numeric code, in combination with the inner race part number to describe the individual component parts, inspection level and the adjustment value of pre-set assemblies: e.g., LM48548-9K2A7.
An assembly number is assigned on receipt of the ?rst order for new applications. It is very important for correct function of the bearing in a given application that the same assembly number is quoted for all subsequent orders.The Timken Company should be consulted if additional information is required on the assembly number.
B
J P 100 49
Caption:
Section 3 Component Designator
Section 1 Duty
Section 2 Inner race Bore Diameter
Radial Tapered Roller Bearings - Torrington
Two or three-digit size indication.
The number is read as an actual bore (i.e., 70 is 7.0 in.) or approximate bore i.e., 83 is 8.375 in.).
Inch size "Series" represents a speci?c bearing internal geometry.
TS single-row
TSS single-row steeper contact angle
TDI two row converging contact angles TDOC, TDO two row diverging contact angles
Bearing Modi?cation Code
70 TS 340 A A 108
Modi?cation code to inner ring.
Modi?cation code to the bearing.
Modi?cation code to outer ring.
•
B TIMKEN PRODUCTS CATALOG
Type TS Tapered Roller Bearings
Caption:
TAPERED ROLLER BEARINGS
• TS style is the most widely used tapered roller bearing.
• Part numbers give speci?ers the widest possible choice from the comprehensive range of metric (ISO and ‘J’ pre?x) and inch-sizes available from The Timken Company.
• Consult your Timken representative before making a ?nal bearing selection to ensure suitability, availability and the most cost-effective application.
• To place an order or obtain a quotation, specify the inner and outer part numbers.
Example: inner race outer race
JH - JH 0
• In most ISO bearings, only one bearing number is speci?ed for both races:
Example:
0
Conforms to the ISO 355 standard.
B
TS
Caption:
Caption:
BEARING DATA TABLES
In the following bearing data tables, part numbers are listed in ascending order of bore, outside diameter and width.
Bearing ratings shown in tables are based on environmental reference conditions. Effects of known operating conditions on bearing performance in an application should be investigated before ?nal bearing selection is made.
Approximate mass is listed for every part number. For weight-critical applications or exact freight cost evaluation purposes, a more accurate value should be obtained from your Timken representative.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. . 0.00 0 00 0. . 50 0 . 0
A 0 A
A 0 A
A 0 A
A 0 A
A 0 A
A 050 A
00050 00 50
A 05 A
L 5 L 5
A 0 A 5
0 0 0
5 0 5 0
5 0 5 0
050 05 5
0 0 0 5
0 0 0
0
HM HM 0
A 0 A 5 A
A 0 A 5
050 05 5
A50 A5
LM LM 0
C
050 05 5
050 0XS 05 5-S
050 0X 05 5-S
0.3125 1.2595 0.3940 2380 618 429 2070
.5 5 . 0.00 0 00 0. . 50 0 . 0
B
Caption:
0.3750 1.2595 0.3940 2380 618 429 2070
. . 0. 00 0. 5 . 0 50 . 500
0.4375 1.3775 0.4330 2740 710 550 2580
. . 0.00 0 00 0. . 50 0 . 0
0.4719 1.2595 0.3940 2380 618 429 2070
. 0 . 0. 00 0. 5 . 0 50 . 500
0.4992 1.3775 0.4330 2740 710 550 2580
. 00 . 0. 00 0. 5 . 0 50 . 500
Caption:
0.5000 1.3775 0.4330 2740 710 550 2580
. 00 . 00 . 5 00 0. . 50 0 0 . 00
0.5000 1.5000 0.5313 4340 1130 531 3840
. . 0. 00 0. 5 . 0 50 . 500
0.5901 1.3775 0.4330 2740 710 550 2580
5. 5 . 0. 00 0. . 50 0 . 00
T
C
0.6250 1.3775 0.4330 3160 820 447 3130
5. 5 . .0 00 0.5 . 0 00 . 00
0.6250 1.5745 0.4730 2790 724 653 2770
5. 5 . 5 . 00 0. . 5 0 0 0 . 00
D
0.6250 1.6250 0.5625 5000 1300 690 4780
5. 5 . . 00 0. 0 0. 5 5 0 5 0 0. 00
B
d
0.6250 1.6875 0.5625 3910 1010 1220 3920
5. 5 . . 0 00 0. . 550 0 . 00
0.6250 1.6875 0.6563 6540 1700 962 6560
5. 5 .000 . 00 0. . 0 0 . 5 00
a
0.6250 1.8504 0.5662 5560 1440 881 5720
5. 5 . 5 . 5 00 0. . 0 00 0 . 0 0500
0.6250 1.9380 0.7813 8920 2310 1050 9100
5. 5 . 5 .0 0 00 0. . 0 00 0 . 0 0500
0.6250 1.9380 0.9063 8920 2310 1050 9100
5. 5 5 . 5 . 5 000 0.5 .0 00 00 0. 500
0.6250 2.1250 0.8750 9670 2510 2540 9560
5. . 5 .000 00 0.55 . 0 0 000 .0 00
0.6294 1.8494 0.8268 8350 2170 2020 8840
. . .0 00 0.5 . 0 00 . 00
0.6690 1.5741 0.4730 2790 724 653 2770
. . .0 00 0.5 . 0 00 . 00
0.6690 1.5745 0.4730 2790 724 653 2770
. .000 . 00 0. . 0 0 . 5 00
0.6690 1.8504 0.5662 5560 1440 881 5720
. 55 .5 5 . 00 0. . 0 0 . 0 00
0.6872 1.4380 0.4375 2720 704 587 2600
. . . 00 0. . 0 5 50 0 .0 00
0.6875 1.5700 0.5450 5160 1340 655 5260
. . 50 . 00 00 0. . 5 5 50 0 . 0 00
0.6875 1.7500 0.5000 4460 1160 950 4640
. . 50 5. 00 0. . 0 0 . 5 00
0.6875 1.7500 0.6100 5560 1440 881 5720
. .000 . 00 0. . 0 0 . 5 00
0.7082 1.8504 0.5662 5560 1440 881 5720
.000 .000 . 00 0. . 0 0 . 5 00
0.7087 1.8504 0.5662 5560 1440 881 5720
.00 5 . . 000 0. . 5 0 00 5 0 . 0 5 00
0.7482 2.2400 0.7625 9450 2450 1290 10200
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
0. 5 . - .0 0.5 .5 .0 . .0 .0 -0. 0 . 0 . . 0.0 0 0.05
0.4246 0.3125 -0.12 0.02 0.49 0.51 0.05 1.14 1.02 -0.01 0.06
0.10
0. 5 . - .0 . .5 5.0 . .0 .0 -0. 0 . 0 . . 0.0 0 0.0
0.4246 0.3125 -0.12 0.05 0.53 0.59 0.05 1.14 1.02 -0.01 0.06
0.10
0. . 0 - .5 . 5.5 .5 . .0 .0 0. 0 . 0 . . 0.0 55 0.0
0.4326 0.3437 -0.10 0.05 0.61 0.69 0.05 1.26 1.14 0.00 0.04
0.13
0. 5 . - .0 0. 5.5 .5 . .0 .0 -0. 0 . 0 . . 0.0 0 0.0
0.4246 0.3125 -0.12 0.03 0.61 0.65 0.05 1.14 1.02 -0.01 0.06
0.09
0. . 0 - .5 0. .5 .5 . .0 .0 0. 0 . 0 . . 0.0 55 0.05
0.4326 0.3437 -0.10 0.03 0.69 0.69 0.05 1.26 1.14 0.00 0.04
0.12
0. . 0 - .5 . .0 .5 . .0 .0 0. 0 . 0 . . 0.0 55 0.05
0.4326 0.3437 -0.10 0.05 0.67 0.73 0.05 1.26 1.14 0.00 0.04
0.12
.0 . -5. .5 .5 .0 0. .0 .0 -0. 0 . 0 . . 0.0 0 0.0
0.5540 0.4375 -0.20 0.06 0.65 0.75 0.03 1.34 1.30 -0.02 0.05
0.18
0. . 0 - .5 0. .0 .5 . .0 .0 0. 0 . 0 . . 0.0 55 0.05
0.4326 0.3437 -0.10 0.03 0.75 0.77 0.05 1.26 1.14 0.00 0.04
0.11
0. . - . . .5 .5 . .5 .0 -0. 0 . 0 5. 0.0 0.05
0.4330 0.3430 -0.13 0.05 0.77 0.85 0.05 1.28 1.14 -0.01 0.05
0.11
. 5 .5 5 - .5 . 0.5 .0 . .0 .0 0.50 . 0 . 5. 0.0 0 0.0
0.4391 0.3750 -0.06 0.05 0.81 0.87 0.05 1.46 1.34 0.02 0.06
0.16
. . -5. . 0.0 .5 .0 .5 .0 0. 0 . 0 . .0 0.0 0.0
0.5780 0.4375 -0.20 0.05 0.79 0.85 0.08 1.48 1.34 0.02 0.05
0.21
. .5 5 - . .5 .5 .5 .5 .5 .5 .50 0. 0 . . 0.0 5 0. 0
0.5625 0.3750 -0.05 0.06 0.89 0.96 0.06 1.56 1.36 0.06 0.02
0.22
. 0 . 5 -5. .5 .0 .0 .5 .0 .5 0. 0 . 0 5. .5 0.0 0.
0.6563 0.5313 -0.23 0.06 0.83 0.91 0.06 1.54 1.44 0.02 0.08
0.27
. . - . .5 .0 .5 . .5 0.5 0. 0 . 0 5. 5.55 0.0 0.
0.5662 0.4375 -0.16 0.06 0.83 0.93 0.05 1.67 1.59 0.01 0.05
0.29
.5 . - . 0. .5 .0 . .5 .0 . 0 0. 0 .05 0.0 5 0. 0
0.8480 0.5625 -0.36 0.03 0.85 0.87 0.05 1.75 1.65 0.09 0.02
0.44
.5 . - . 0. .5 .0 .5 .5 .0 . 0 0. 0 .05 0.0 5 0.
0.8480 0.6875 -0.36 0.03 0.85 0.87 0.14 1.75 1.54 0.09 0.02
0.47
. 5. 5 -5. 0. .0 .0 . 50.0 .0 * * . 0.055 0.
0.8598 0.6250 -0.23 0.03 1.03 1.14 0.09 1.97 1.69 * *
0.57
.000 .000 - . .0 .0 .5 .0 .0 .5 . 0 . 0 . .5 0.05 0.
0.8268 0.6299 -0.24 0.04 0.90 1.08 0.08 1.69 1.48 0.06 0.05
0.42
. 5 .5 5 - .5 0. .0 .0 . .5 .0 0.50 . 0 . 5. 0.0 0 0.0
0.4391 0.3750 -0.06 0.03 0.83 0.87 0.05 1.44 1.34 0.02 0.06
0.16
. 5 .5 5 - .5 0. .0 .0 . .0 .0 0.50 . 0 . 5. 0.0 0 0.0
0.4391 0.3750 -0.06 0.03 0.83 0.87 0.05 1.46 1.34 0.02 0.06
0.16
. . - . .5 .0 .5 . .5 0.5 0. 0 . 0 5. 5.55 0.0 0.
0.5662 0.4375 -0.16 0.06 0.87 0.96 0.05 1.67 1.59 0.01 0.05
0.28
. . - .0 .5 .5 .5 .5 .5 0.0 0.00 . 0 .5 . 0.0 0.05
0.4375 0.3125 -0.08 0.06 0.84 0.93 0.06 1.32 1.18 0.00 0.05
0.11
. 05 0. -5. . .0 .5 . .0 .0 0. 0 0. 0 . . 0.0 0.0
0.5750 0.4200 -0.20 0.05 0.87 0.93 0.05 1.46 1.34 0.02 0.03
0.18
. 0 .5 5 - . .5 .0 .5 .5 .0 .0 0. 0 . 0 . . 0.0 5 0. 0
0.4688 0.3750 -0.07 0.06 0.87 0.96 0.06 1.61 1.50 0.03 0.06
0.21
. . 0 - . 0. .5 .0 .5 .0 .0 0. 0 . 0 5. 5.55 0.0 0.
0.5662 0.4500 -0.16 0.03 0.89 0.91 0.06 1.65 1.50 0.01 0.05
0.25
. . - . .0 .5 .0 .5 .5 0.5 0. 0 . 0 5. 5.55 0.0 0.
0.5662 0.4375 -0.16 0.08 0.89 1.02 0.06 1.67 1.59 0.01 0.05
0.27
. . - . .5 .5 5.0 .5 .5 0.5 0. 0 . 0 5. 5.55 0.0 0.
0.5662 0.4375 -0.16 0.06 0.89 0.98 0.06 1.67 1.59 0.01 0.05
0.28
. 5. 5 - . .5 5.0 .0 . 5 .0 .0 * * 0. 5. 0.05 0.
0.7810 0.6250 -0.27 0.06 0.98 1.06 0.05 2.01 1.93 * *
0.59
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
.00 5 . . 000 0. . 5 0 00 5 0 . 0 5 00
X
A 0 5 A 5
A 0 5 A
A
LM LM 0
050 5 05 5
050 5X 05 5-S
0 0 0 5
0 0 0 5
0 0 0 5
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0 0
LM LM
0 0 0 -S
0 0 0 -S
0 5
0 5
0 5A
5
050 05 5A
050 05
050 05 5
050 05 5-S
0.7482 2.2400 0.7625 9450 2450 1290 10200
.050 . .0 00 0.5 . 0 00 . 00
B
Caption:
0.7500 1.5745 0.4730 2790 724 653 2770
.050 . 5 . 05 00 0.5 . 0 00 . 00
0.7500 1.6250 0.4687 2790 724 653 2770
.050 . 50 . 00 00 0. . 5 5 50 0 . 0 00
0.7500 1.7500 0.5000 4460 1160 950 4640
.050 5. 5. 0 00 0. 0 .00 0 0 0 . 000
0.7500 1.7810 0.6100 6870 1780 917 7200
.050 .000 . 00 0. . 0 0 . 5 00
Caption:
0.7500 1.8504 0.5662 5560 1440 881 5720
.050 .000 . 00 0. . 0 0 . 5 00
0.7500 1.8504 0.5662 5560 1440 881 5720
.050 . 5 .0 00 0. . 0 00 0 . 0 0500
0.7500 1.9380 0.7100 8920 2310 1050 9100
.050 . 5 . 5 00 0. . 0 00 0 . 0 0500
T
C
0.7500 1.9380 0.7813 8920 2310 1050 9100
.050 . 5 . 5 00 0. . 0 00 0 . 0 0500
0.7500 1.9380 0.7813 8920 2310 1050 9100
.050 . 5 . 0 00 0. . 0 00 0 . 0 0500
D
0.7500 1.9380 0.8350 8920 2310 1050 9100
.050 . 5 . 0 00 0. . 0 00 0 . 0 0500
B
d
0.7500 1.9380 0.8350 8920 2310 1050 9100
.050 . 5 .0 0 00 0. . 0 00 0 . 0 0500
0.7500 1.9380 0.9063 8920 2310 1050 9100
.050 . 5 .0 0 00 0. . 0 00 0 . 0 0500
a
0.7500 1.9380 0.9063 8920 2310 1050 9100
.050 . 5 .0 0 00 0. . 0 00 0 . 0 0500
0.7500 1.9380 0.9063 8920 2310 1050 9100
.050 . 5 .0 0 00 0. . 0 00 0 . 0 0500
0.7500 1.9380 0.9063 8920 2310 1050 9100
.050 50. 00 0. 00 0. . 0 00 0 . 0 0500
0.7500 2.0000 0.8125 8920 2310 1050 9100
.050 5 . 00 .0 0 00 0. 0 .00 0 0 0 . 000
0.7500 2.0787 0.7100 6870 1780 917 7200
.050 5 . . 0 00 0. . 0 00 0 . 0 0500
0.7500 2.0820 0.7256 8920 2310 1050 9100
.050 5 . 0. 00 0. . 0 00 0 . 0 0500
0.7500 2.0820 0.7969 8920 2310 1050 9100
.050 5 . 5 . 5 000 0.5 .0 00 00 0. 500
0.7500 2.1250 0.8750 9670 2510 2540 9560
.050 5 . 5 . 5 000 0.5 .0 00 00 0. 500
0.7500 2.1250 0.8750 9670 2510 2540 9560
.050 5 . 5 . 5 000 0.5 .0 00 00 0. 500
0.7500 2.1250 0.8750 9670 2510 2540 9560
.050 5 . . 000 0. . 5 0 00 5 0 . 0 5 00
0.7500 2.2400 0.7625 9450 2450 1290 10200
. . . 00 0. . 0 0 . 5 00
0.7869 1.8497 0.5662 5560 1440 881 5720
. . 0 5. 50 00 0. . 0 0 . 5 00
0.7869 1.8500 0.6004 5560 1440 881 5720
. .000 . 00 0. . 0 0 . 5 00
0.7869 1.8504 0.5662 5560 1440 881 5720
. .000 . 00 0. . 0 0 . 5 00
0.7869 1.8504 0.5662 5560 1440 881 5720
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 5. 5 - . .5 5.0 .0 .5 5 .0 .0 * * 0. 5. 0.05 0.
0.7810 0.6250 -0.27 0.06 0.98 1.06 0.06 2.01 1.93 * *
0.59
. 5 .5 5 - .5 .0 .0 .0 . .0 .0 0.50 . 0 . 5. 0.0 0 0.0
0.4391 0.3750 -0.06 0.04 0.91 0.94 0.05 1.46 1.34 0.02 0.06
0.14
. 5 . 0 - .5 .0 .0 .0 . .0 .5 0.50 . 0 . 5. 0.0 0 0.0
0.4391 0.3437 -0.06 0.04 0.91 0.94 0.05 1.46 1.36 0.02 0.06
0.15
. 0 .5 5 - . .5 .5 5.5 .5 .0 .0 0. 0 . 0 . . 0.0 5 0.0
0.4688 0.3750 -0.07 0.06 0.93 1.00 0.06 1.61 1.50 0.03 0.06
0.20
. .0 5 -5. . .5 5.0 . .5 .5 0. 0 0. 0 . 5. 0.0 0.
0.6550 0.4750 -0.22 0.05 0.93 0.98 0.05 1.63 1.56 0.01 0.03
0.28
. . - . . .5 5.0 . .5 0.5 0. 0 . 0 5. 5.55 0.0 0.
0.5662 0.4375 -0.16 0.05 0.93 0.98 0.05 1.67 1.59 0.01 0.05
0.27
. . - . .5 .5 5.5 .5 .5 0.5 0. 0 . 0 5. 5.55 0.0 0.
0.5662 0.4375 -0.16 0.06 0.93 1.00 0.06 1.67 1.59 0.01 0.05
0.27
.050 . - . . .0 5.5 . .5 .0 0.50 . 0 .05 0.0 5 0.
0.7500 0.5625 -0.29 0.05 0.94 1.00 0.05 1.75 1.65 0.02 0.05
0.39
.5 . - . .5 .0 .0 . .5 .0 . 0 0. 0 .05 0.0 5 0.
0.8480 0.5625 -0.36 0.06 0.94 1.02 0.05 1.75 1.65 0.09 0.02
0.40
.5 . - . . .0 5.5 . .5 .0 . 0 0. 0 .05 0.0 5 0.
0.8480 0.5625 -0.36 0.05 0.94 1.00 0.05 1.75 1.65 0.09 0.02
0.41
.050 . - . . .0 5.5 .5 .5 .0 0.50 . 0 .05 0.0 5 0.
0.7500 0.6875 -0.29 0.05 0.94 1.00 0.14 1.75 1.54 0.02 0.05
0.42
.050 . - . . .0 5.5 .5 .5 .5 0.50 . 0 .05 0.0 5 0.
0.7500 0.6875 -0.29 0.05 0.94 1.00 0.06 1.75 1.63 0.02 0.05
0.43
.5 . - . .5 .0 .0 .5 .5 .0 . 0 0. 0 .05 0.0 5 0. 0
0.8480 0.6875 -0.36 0.06 0.94 1.02 0.14 1.75 1.54 0.09 0.02
0.43
.5 . - . .5 .0 .0 .5 .5 .5 . 0 0. 0 .05 0.0 5 0. 0
0.8480 0.6875 -0.36 0.06 0.94 1.02 0.06 1.75 1.63 0.09 0.02
0.45
.5 . - . . .0 5.5 .5 .5 .0 . 0 0. 0 .05 0.0 5 0. 0
0.8480 0.6875 -0.36 0.05 0.94 1.00 0.14 1.75 1.54 0.09 0.02
0.44
.5 . - . . .0 5.5 .5 .5 .5 . 0 0. 0 .05 0.0 5 0. 0
0.8480 0.6875 -0.36 0.05 0.94 1.00 0.06 1.75 1.63 0.09 0.02
0.45
.5 . - . .5 .0 .0 0.5 5.5 .0 . 0 0. 0 .05 0.0 5 0.
0.8480 0.6875 -0.36 0.06 0.94 1.02 0.02 1.79 1.73 0.09 0.02
0.47
. . 05 -5. . .5 5.0 . 5.5 .0 0. 0 0. 0 . 5. 0.0 0. 0
0.6550 0.5750 -0.22 0.05 0.93 0.98 0.05 1.79 1.65 0.01 0.03
0.44
.050 . - . . .0 5.5 . .5 .0 0.50 . 0 .05 0.0 5 0.
0.7500 0.5781 -0.29 0.05 0.94 1.00 0.13 1.83 1.65 0.02 0.05
0.45
.5 . - . .5 .0 .0 . .5 .0 . 0 0. 0 .05 0.0 5 0.
0.8480 0.5781 -0.36 0.06 0.94 1.02 0.13 1.83 1.65 0.09 0.02
0.47
. 5. 5 -5. .5 .0 .5 . 50.0 .0 . 0 . 0 .55 0.055 0. 5
0.8598 0.6250 -0.23 0.06 1.03 1.24 0.09 1.97 1.69 0.13 0.07
0.54
. 5. 5 -5. .5 .0 .5 0.5 50.0 .5 . 0 . 0 .55 0.055 0. 5
0.8598 0.6250 -0.23 0.06 1.03 1.24 0.02 1.97 1.75 0.13 0.07
0.55
. 5. 5 -5. .5 .0 .5 . 50.0 .0 . 0 . 0 .55 0.055 0. 5
0.8598 0.6250 -0.23 0.06 1.03 1.24 0.09 1.97 1.69 0.13 0.07
0.54
. 5. 5 - . .5 5.0 .0 . 5 .0 .0 . 0 0. 0 0. 5. 0.05 0.
0.7810 0.6250 -0.27 0.06 0.98 1.06 0.05 2.01 1.93 0.07 0.01
0.59
. . - . .5 .0 .5 .5 .5 0.5 0. 0 . 0 5. 5.55 0.0 0.
0.5662 0.4375 -0.16 0.06 0.94 1.04 0.06 1.67 1.59 0.01 0.05
0.26
. .000 - . .5 .0 .5 .5 .5 0.5 0. 0 . 0 5. 5.55 0.0 0.
0.5662 0.4724 -0.16 0.06 0.94 1.04 0.06 1.67 1.59 0.01 0.05
0.27
. . - . .5 .0 .5 . .5 0.5 0. 0 . 0 5. 5.55 0.0 0.
0.5662 0.4375 -0.16 0.06 0.94 1.04 0.05 1.67 1.59 0.01 0.05
0.26
. . - . .5 .0 .5 .5 .5 0.5 0. 0 . 0 5. 5.55 0.0 0.
0.5662 0.4375 -0.16 0.06 0.94 1.04 0.06 1.67 1.59 0.01 0.05
0.26
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 5 . 5.0 000 0. 0 . 0 0 . 5 00
0 0 X 0 0
XAA 00 X YAA 00 X
0 0 0 0
5 0 5 0
M M 0
LM LM 0
LM LM
LL5 5 LL5 5 0
0 0 0
0 0 X 0
M A M 0
M M 0
0 0 0 0
0 0 X 0 05
0
0
55 0
55
55 X
5
0 0
5
5
55 0
X
LM LM 0
0.7869 2.0470 0.5910 6060 1570 1080 6650
0.000 .000 5.000 5 00 0. . 0 0 0 .5 00
B
Caption:
0.7874 1.6535 0.5906 5770 1500 959 6600
0.000 5 . 5.0 000 0. 0 . 0 0 . 5 00
0.7874 2.0470 0.5910 6060 1570 1080 6650
0. 5 . . 000 0. . 5 0 00 5 0 . 0 5 00
0.8121 2.2400 0.7625 9450 2450 1290 10200
0. . 5 . 5 0 00 0. . 0500 5 0 . 00
0.8125 1.9380 0.7813 9080 2360 1300 9720
. 0 50.005 .5 0 00 0. . 0 00 50 0 . 0 500
Caption:
0.8437 1.9687 0.6900 9170 2380 1130 9780
. 5. 5. 0 00 0. . 0 00 . 5 00
0.8656 1.7810 0.6100 6780 1760 921 7930
. 5. 5. 0 00 0. . 0 00 . 5 00
0.8656 1.8100 0.6100 6780 1760 921 7930
. 5 .0 0 . 5 00 0. 0 .5 0 00 . 00
T
C
0.8750 1.6563 0.4400 3450 895 607 3770
. 5 50.005 . 5 000 0. 0 . 0 0 . 5 00
0.8750 1.9687 0.5313 6060 1570 1080 6650
. 5 50.005 . 5 000 0. 0 . 0 0 . 5 00
D
0.8750 1.9687 0.5313 6060 1570 1080 6650
. 5 50.005 .5 0 00 0. . 0 00 50 0 . 0 500
B
d
0.8750 1.9687 0.6900 9170 2380 1130 9780
. 5 50.005 .5 0 00 0. . 0 00 50 0 . 0 500
0.8750 1.9687 0.6900 9170 2380 1130 9780
. 5 5 . 5.0 000 0. 0 . 0 0 . 5 00
a
0.8750 2.0470 0.5910 6060 1570 1080 6650
. 5 5 .000 5.0 000 0. 0 . 0 0 . 5 00
0.8750 2.0472 0.5910 6060 1570 1080 6650
. 5 5 . . 00 0. .05 500 5 0 .00 00
0.8750 2.0625 0.7625 9960 2580 1290 10900
. 5 5 . 5 . 00 0. .05 500 5 0 .00 00
0.8750 2.1250 0.7625 9960 2580 1290 10900
. 5 5 . 5 . 000 0. . 5 0 00 5 0 . 0 5 00
0.8750 2.1250 0.7625 9450 2450 1290 10200
. 5 5 . . 000 0. . 5 0 00 5 0 . 0 5 00
0.8750 2.2400 0.7625 9450 2450 1290 10200
. 5 5 . . 000 0. . 5 0 00 5 0 . 0 5 00
0.8750 2.2400 0.7625 9450 2450 1290 10200
. 5 5 . 50 . 5 00 0. . 00 5 0 . 50 00
0.8750 2.2500 0.7813 10100 2610 1470 11300
. 5 5 . 50 . 5 5 00 0. 5 . 00 0 . 55 00
0.8750 2.2500 0.8750 11500 2990 1770 12400
. 5 5 . .050 00 0. . 00 5 0 . 50 00
0.8750 2.3125 0.7500 10100 2610 1470 11300
. 5 0. 5 . 5 00 0. . 00 5 0 . 50 00
0.8750 2.3750 0.7813 10100 2610 1470 11300
. 5 . .5 000 0. . 00 0 00 .0 00
0.8750 2.4375 1.4375 18400 4780 2310 20200
. 5 .000 . 00 0. . 500 5 0 . 00
0.8750 2.4409 0.7080 10800 2810 1160 11100
. 5 . . 000 0. 5 . 00 000 . 0 00
0.8750 2.6150 0.9375 16000 4140 1800 18400
. 0 .000 5.500 500 0. . 0 5 0 . 000
0.8900 1.8504 0.6102 6170 1600 1300 7420
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B 0 TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 0 . 00 - . .5 .0 .5 . .0 5.0 0. 0 . 0 . .0 0.050 0.
0.5614 0.5000 -0.11 0.06 1.02 1.08 0.05 1.89 1.77 0.01 0.06
0.36
5.000 .000 - . .0 5.5 .0 .0 .5 .5 0. 0 . 0 . . 0.0 0. 0
0.5906 0.4724 -0.18 0.08 1.00 1.14 0.04 1.56 1.44 0.02 0.06
0.21
. 0 . 00 - . .5 .0 .5 . .0 5.0 0. 0 . 0 . .0 0.050 0.
0.5614 0.5000 -0.11 0.06 1.02 1.08 0.05 1.89 1.77 0.01 0.06
0.36
. 5. 5 - . 0. .0 .0 . 5 .0 .0 * * 0. 5. 0.05 0.
0.7810 0.6250 -0.27 0.03 1.02 1.06 0.05 2.01 1.93 * *
0.57
. 5 5. 5 - . .5 .0 .5 .5 5.5 .5 0. 0 . 0 . . 0.0 5 0.
0.7813 0.6250 -0.28 0.06 1.02 1.12 0.06 1.79 1.67 0.04 0.04
0.40
. . 0 - . . .5 .5 . .0 .0 0. 0 . 0 . 5. 0.0 0.
0.7200 0.5500 -0.25 0.05 1.08 1.16 0.05 1.81 1.73 0.01 0.04
0.37
. .0 5 -5. . .0 .5 . .0 .5 0. 0 0. 0 . . 0.0 0 0.
0.6550 0.4750 -0.21 0.05 1.02 1.08 0.05 1.65 1.56 0.02 0.02
0.26
. .0 5 -5. . .0 .5 . .5 0.0 0. 0 0. 0 . . 0.0 0 0.
0.6550 0.4750 -0.21 0.05 1.02 1.08 0.05 1.67 1.57 0.02 0.02
0.27
. . - . . .0 .5 . .5 .5 -0. 0 . 0 . . 0.0 0.0
0.4400 0.3400 -0.07 0.05 1.02 1.08 0.05 1.56 1.44 -0.01 0.04
0.14
. 0 .5 5 - . . .0 .5 .0 .0 .5 0. 0 . 0 . .0 0.050 0.
0.5614 0.3750 -0.11 0.05 1.06 1.12 0.04 1.85 1.75 0.01 0.06
0.28
. 0 .5 5 - . .5 .0 .0 .0 .0 .5 0. 0 . 0 . .0 0.050 0.
0.5614 0.3750 -0.11 0.06 1.06 1.14 0.04 1.85 1.75 0.01 0.06
0.28
. . 0 - . 0. .5 .5 . .0 .0 0. 0 . 0 . 5. 0.0 0.
0.7200 0.5500 -0.25 0.02 1.04 1.04 0.05 1.81 1.73 0.01 0.04
0.36
. . 0 - . . .5 .5 . .0 .0 0. 0 . 0 . 5. 0.0 0.
0.7200 0.5500 -0.25 0.05 1.04 1.12 0.05 1.81 1.73 0.01 0.04
0.36
. 0 . 00 - . . .0 .5 . .0 5.0 0. 0 . 0 . .0 0.050 0. 5
0.5614 0.5000 -0.11 0.05 1.06 1.12 0.05 1.89 1.77 0.01 0.06
0.34
. 0 . 00 - . .5 .0 .0 .0 .0 .5 0. 0 . 0 . .0 0.050 0. 5
0.5614 0.5000 -0.11 0.06 1.06 1.14 0.08 1.89 1.75 0.01 0.06
0.34
0. . - . .5 .0 .5 .5 .5 5.0 . 0 . 0 0. 5. 0.050 0. 0
0.7940 0.5625 -0.30 0.06 1.06 1.16 0.06 1.91 1.77 0.05 0.04
0.45
0. . - . .5 .0 .5 .5 .0 .0 . 0 . 0 0. 5. 0.050 0.
0.7940 0.5625 -0.30 0.06 1.06 1.16 0.06 1.93 1.81 0.05 0.04
0.48
. 5. 5 - . . .5 .0 0. 50.0 .5 . 0 0. 0 0. 5. 0.05 0.
0.7810 0.6250 -0.27 0.05 1.08 1.14 0.03 1.97 1.91 0.07 0.01
0.49
. 5. 5 - . . .5 .0 . 5 .0 .0 . 0 0. 0 0. 5. 0.05 0. 5
0.7810 0.6250 -0.27 0.05 1.08 1.14 0.05 2.01 1.93 0.07 0.01
0.56
. 5. 5 - . . .5 .0 .5 5 .0 .0 . 0 0. 0 0. 5. 0.05 0. 5
0.7810 0.6250 -0.27 0.05 1.08 1.14 0.06 2.01 1.93 0.07 0.01
0.55
. 55 5. 5 -5. 0. .0 .0 .5 5 .5 5 .0 0. 0 . 0 .5 . 0.05 5 0.
0.7620 0.6250 -0.23 0.03 1.10 1.14 0.06 2.11 2.01 0.03 0.04
0.57
. 5 . - . 0. .0 .5 .5 5 .0 .0 * * . 5.5 0.055 0.
0.8750 0.6875 -0.27 0.03 1.14 1.16 0.06 2.05 1.93 * *
0.63
. 55 5.0 0 -5. 0. .0 .0 . 5 .0 5 .0 0. 0 . 0 .5 . 0.05 5 0.
0.7620 0.5937 -0.23 0.03 1.10 1.14 0.05 2.13 2.05 0.03 0.04
0.60
. 55 5. 5 -5. 0. .0 .0 . 55.0 5 .0 0. 0 . 0 .5 . 0.05 5 0.
0.7620 0.6250 -0.23 0.03 1.10 1.14 0.05 2.17 2.05 0.03 0.04
0.65
. 5 . - . 0. 0.5 0.5 . 5 .5 5 .0 . 0 0. 0 . 0.05 0.5
1.5100 0.9375 -0.78 0.01 1.20 1.20 0.13 2.27 2.05 0.39 0.01
1.12
.000 .00 - . .5 0.0 .5 .0 5 .0 55.0 0. 0 0. 0 . . 0.050 0.
0.7480 0.6300 -0.24 0.14 1.18 1.36 0.08 2.24 2.17 0.00 0.03
0.63
5. .050 - . .5 .0 .0 . 0.0 5 .0 0. 0 0. 0 . 0.05 0.
1.0013 0.7500 -0.37 0.06 1.26 1.34 0.05 2.36 2.28 0.03 0.03
1.02
5.500 .000 - .0 .5 .0 0.0 .0 .0 0.5 0. 0 0. 0 .5 . 5 0.05 0.
0.6102 0.4724 -0.12 0.06 1.10 1.18 0.04 1.73 1.59 0.02 0.04
0.28
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 50.005 . 5 000 0. 0 . 0 0 . 5 00 0 0 0
0.9375 1.9687 0.5313 6060 1570 1080 6650
. 50. . 00 0. . 0 0 0 .5 00 L 0 L 0
0.9375 1.9800 0.5600 6260 1620 1040 7400
. 50. 00 5.0 000 0. 0 . 0 0 . 5 00 0 0 0 0X
0.9375 2.0000 0.5910 6060 1570 1080 6650
. 5 . 5.0 000 0. 0 . 0 0 . 5 00 0 0 0 0
0.9375 2.0470 0.5910 6060 1570 1080 6650
. 5 . 5 . 000 0. . 5 0 00 5 0 . 0 5 00 0
0.9375 2.1250 0.7625 9450 2450 1290 10200
. 5 . . 000 0. . 5 0 00 5 0 . 0 5 00
0.9375 2.2400 0.7625 9450 2450 1290 10200
. . .5 5 000 0. . 00 0 00 .0 00 5 0
0.9375 2.4375 1.1250 18400 4780 2310 20200
. 5.0 . 5 50 00 0. 0. 00 00 0. 0 55 00 0 5
0.9375 2.5625 0.8750 11400 2950 3690 12500
. . . 000 0. 5 . 00 000 . 0 00 5
0.9375 2.6150 0.9375 16000 4140 1800 18400
.000 55.000 5.000 00 0. 5 . 0 00 0 . 5 000 JHM JHM 0
0.9449 2.1654 0.9842 14000 3620 2190 16000
. . 5 5. 00 00 0. 0. 0 00 00 0. 00 0
0.9600 3.1250 1.0000 16200 4190 4790 17100
. 50.005 . 5 000 0. 0 . 0 0 . 5 00 0 0 0
0.9835 1.9687 0.5313 6060 1570 1080 6650
. 5 . 5.0 000 0. 0 . 0 0 . 5 00 0 0 0 0
0.9835 2.0470 0.5910 6060 1570 1080 6650
. 5 .000 5.0 000 0. 0 . 0 0 . 5 00 0 0 0 05
0.9835 2.0472 0.5910 6060 1570 1080 6650
. . .00 0000 0. .5 0 00 00 .5 00 0 A
0.9835 2.4402 0.6300 9000 2330 1530 9910
. .000 .00 0000 0. .5 0 00 00 .5 00 0
0.9835 2.4409 0.6300 9000 2330 1530 9910
5.000 .000 5.000 500 0. . 0 5 0 . 5 00 XAA 005X YAA 005X
0.9843 1.8504 0.5906 6410 1660 1220 7950
5.000 50.005 . 5 000 0. 0 . 0 0 . 5 00 0 0 0
0.9843 1.9687 0.5313 6060 1570 1080 6650
5.000 5 . 5.0 000 0. 0 . 0 0 . 5 00 0 0 0 0
0.9843 2.0470 0.5910 6060 1570 1080 6650
5.000 5 .000 . 0 00 0. . 0 0 0 .5 00 JL A JL 5
0.9843 2.0472 0.5600 6260 1620 1040 7400
5.000 5 .000 5.0 000 0. 0 . 0 0 . 5 00 0 0 0 05
0.9843 2.0472 0.5910 6060 1570 1080 6650
5.000 . .0 00 0. . 500 5 0 . 00 X
0.9843 2.4375 0.8275 10800 2810 1160 11100
5. 00 50.005 . 5 000 0. 0 . 0 0 . 5 00 0 00-S 0
1.0000 1.9687 0.5313 6060 1570 1080 6650
5. 00 50. . 00 0. . 0 0 0 .5 00 L L 0
1.0000 1.9800 0.5600 6260 1620 1040 7400
5. 00 50. . 00 0. . 0 0 0 .5 00 L L 0
1.0000 1.9800 0.5600 6260 1620 1040 7400
5. 00 50. 00 5.0 000 0. 0 . 0 0 . 5 00 0 00-S 0 0X
1.0000 2.0000 0.5910 6060 1570 1080 6650
5. 00 50. 00 5.0 000 0. 0 . 0 0 . 5 00 0 00-SA 0 0X
1.0000 2.0000 0.5910 6060 1570 1080 6650
5. 00 5 . 5.0 00 0. . 0 0 0 .5 00 L L
1.0000 2.0467 0.5910 6260 1620 1040 7400
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 0 .5 5 - . .5 .5 0.5 .0 .0 .5 0. 0 . 0 . .0 0.050 0.
0.5614 0.3750 -0.11 0.06 1.12 1.20 0.04 1.85 1.75 0.01 0.06
0.27
. 0. - . .5 .5 0.5 . .0 .5 0. 0 0.50 . . 0.05 0.
0.5800 0.4200 -0.13 0.06 1.12 1.20 0.05 1.85 1.75 0.03 0.02
0.29
. 0 . 00 - . .5 .5 0.5 .5 .5 .5 0. 0 . 0 . .0 0.050 0.
0.5614 0.5000 -0.11 0.06 1.12 1.20 0.06 1.87 1.75 0.01 0.06
0.30
. 0 . 00 - . .5 .5 0.5 . .0 5.0 0. 0 . 0 . .0 0.050 0. 5
0.5614 0.5000 -0.11 0.06 1.12 1.20 0.05 1.89 1.77 0.01 0.06
0.33
. 5. 5 - . 0. .5 .5 0. 50.0 .5 . 0 0. 0 0. 5. 0.05 0.
0.7810 0.6250 -0.27 0.03 1.12 1.16 0.03 1.97 1.91 0.07 0.01
0.47
. 5. 5 - . 0. .5 .5 . 5 .0 .0 . 0 0. 0 0. 5. 0.05 0.
0.7810 0.6250 -0.27 0.03 1.12 1.16 0.05 2.01 1.93 0.07 0.01
0.54
0. . - . . .5 5.5 . 5 .5 5 .0 .00 0. 0 . 0.05 0.
1.1975 0.9375 -0.47 0.09 1.24 1.40 0.13 2.27 2.05 0.08 0.01
0.96
. 5. 5 - . .5 .5 .5 .5 .0 5 .0 . 0 .00 . .5 0.0 00 0.
0.8450 0.6250 -0.09 0.06 1.36 1.52 0.06 2.48 2.09 0.15 0.08
0.81
5. .050 - . 0. 0.0 .0 . 0.0 5 .0 0. 0 0. 0 . 0.05 0. 5
1.0013 0.7500 -0.37 0.03 1.18 1.22 0.05 2.36 2.28 0.03 0.03
0.99
5.000 .000 - . .0 0.0 5.0 .0 5 .0 .0 0. 0 . 0 . 5. 0.05 0.
0.9843 0.8268 -0.35 0.08 1.18 1.38 0.08 2.05 1.85 0.02 0.07
0.65
.0 . - .0 0. .5 0.5 .5 .0 .0 . 0 . 0 . .5 0.0 0.
0.9478 0.6875 -0.08 0.03 1.56 1.59 0.06 2.91 2.64 0.13 0.09
1.42
. 0 .5 5 - . .5 .0 .0 .0 .0 .5 0. 0 . 0 . .0 0.050 0.
0.5614 0.3750 -0.11 0.06 1.14 1.22 0.04 1.85 1.75 0.01 0.06
0.26
. 0 . 00 - . .5 .0 .0 . .0 5.0 0. 0 . 0 . .0 0.050 0.
0.5614 0.5000 -0.11 0.06 1.14 1.22 0.05 1.89 1.77 0.01 0.06
0.31
. 0 . 00 - . .5 .0 .0 .0 .0 .5 0. 0 . 0 . .0 0.050 0.
0.5614 0.5000 -0.11 0.06 1.14 1.22 0.08 1.89 1.75 0.01 0.06
0.31
.5 . - . .5 0.5 .0 .5 5 .0 5 .0 0. 0 . 0 . . 0.05 0. 5
0.6522 0.5625 -0.14 0.06 1.20 1.30 0.06 2.24 2.13 0.01 0.07
0.56
.5 . - . .5 0.5 .0 .5 5 .0 5 .0 0. 0 . 0 . . 0.05 0. 5
0.6522 0.5625 -0.14 0.06 1.20 1.30 0.06 2.24 2.13 0.01 0.07
0.56
5.000 .500 - . . 0.0 .0 .0 .5 .0 0. 0 . 0 . . 0.05 0.
0.5906 0.4528 -0.13 0.13 1.18 1.46 0.04 1.75 1.61 0.02 0.05
0.25
. 0 .5 5 - . .5 .0 .0 .0 .0 .5 0. 0 . 0 . .0 0.050 0.
0.5614 0.3750 -0.11 0.06 1.14 1.22 0.04 1.85 1.75 0.01 0.06
0.26
. 0 . 00 - . .5 .0 .0 . .0 5.0 0. 0 . 0 . .0 0.050 0.
0.5614 0.5000 -0.11 0.06 1.14 1.22 0.05 1.89 1.77 0.01 0.06
0.31
. 0. - . . 0.0 .0 . .0 5.5 0. 0 0.50 . . 0.05 0.
0.5800 0.4200 -0.13 0.05 1.18 1.26 0.05 1.89 1.79 0.03 0.02
0.31
. 0 . 00 - . .5 .0 .0 .0 .0 .5 0. 0 . 0 . .0 0.050 0.
0.5614 0.5000 -0.11 0.06 1.14 1.22 0.08 1.89 1.75 0.01 0.06
0.31
.000 . - . .0 0.0 .5 . 5 .0 5 .0 0. 0 0. 0 . . 0.050 0.
0.7480 0.6875 -0.24 0.08 1.18 1.32 0.13 2.24 2.05 0.00 0.03
0.63
. 0 .5 5 - . .5 .5 .5 .0 .0 .5 0. 0 . 0 . .0 0.050 0.
0.5614 0.3750 -0.11 0.06 1.16 1.24 0.04 1.85 1.75 0.01 0.06
0.25
. 0. - . .5 .5 .0 . .0 .5 0. 0 0.50 . . 0.05 0.
0.5800 0.4200 -0.13 0.14 1.16 1.42 0.05 1.85 1.75 0.03 0.02
0.27
. 0. - . . 0.0 .0 . .0 .5 0. 0 0. 0 . . 0.05 0.
0.5800 0.4200 -0.13 0.05 1.18 1.26 0.05 1.85 1.75 0.03 0.02
0.28
. 0 . 00 - . .5 .5 .5 .5 .5 .5 0. 0 . 0 . .0 0.050 0.
0.5614 0.5000 -0.11 0.06 1.16 1.24 0.06 1.87 1.75 0.01 0.06
0.29
. 0 . 00 - . . .5 5.0 .5 .5 .5 0. 0 . 0 . .0 0.050 0.
0.5614 0.5000 -0.11 0.13 1.16 1.38 0.06 1.87 1.75 0.01 0.06
0.28
. . 00 - . . 0.0 .0 .0 .0 .5 0. 0 0. 0 . . 0.05 0. 5
0.5800 0.5000 -0.13 0.05 1.18 1.26 0.08 1.89 1.75 0.03 0.02
0.32
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
5. 00 5 .000 5.0 000 0. 0 . 0 0 . 5 00
0 00-S 0 05
0 00-SA 0 05
0 0
0
55 55 0
M 5 M 5 0
X
0 X
M M 0
55 55
X
5 00-SR 5 5
5 00 5 5
5 0 5 5
5 0 5 5
5 00 5
5 0 5
0
5 00 5 50
5 0 5 50
5 0 5 50
5 00-S 5 50X
5 0 5 50X
0 X 50X
00 5
1.0000 2.0472 0.5910 6060 1570 1080 6650
5. 00 5 .000 5.0 000 0. 0 . 0 0 . 5 00
B
Caption:
1.0000 2.0472 0.5910 6060 1570 1080 6650
5. 00 5 . 5 . 000 0. . 5 0 00 5 0 . 0 5 00
1.0000 2.1250 0.7625 9450 2450 1290 10200
5. 00 5 . . 000 0. . 5 0 00 5 0 . 0 5 00
1.0000 2.2400 0.7625 9450 2450 1290 10200
5. 00 5 . 50 . 00 0. 5 . 000 550 . 50 00
1.0000 2.2500 0.6875 9570 2480 1470 11300
5. 00 5 . 50 . 00 0.55 . 0 00 0 00 .0 5 00
Caption:
1.0000 2.2500 0.7650 10100 2620 2450 11900
5. 00 5 . 50 . 5 00 0. . 00 5 0 . 50 00
1.0000 2.2500 0.7813 10100 2610 1470 11300
5. 00 5 . 50 . 5 00 0. . 00 5 0 . 50 00
1.0000 2.2500 0.7813 10100 2610 1470 11300
5. 00 5 . 50 0. 000 0. . 5 0 00 5 0 . 0 5 00
T
C
1.0000 2.2500 0.7960 9450 2450 1290 10200
5. 00 5 . .050 00 0. . 00 5 0 . 50 00
1.0000 2.3125 0.7500 10100 2610 1470 11300
5. 00 5 .5 0 . 5 00 0.55 . 0 00 000 .0 00
D
1.0000 2.3437 0.9200 12100 3140 2930 14200
5. 00 0. 5 . 00 0. 5 . 000 550 . 50 00
B
d
1.0000 2.3750 0.7812 9570 2480 1470 11300
5. 00 0. 5 . 5 00 0. . 00 5 0 . 50 00
1.0000 2.3750 0.7813 10100 2610 1470 11300
5. 00 0. 5 . 5 00 0. . 00 5 0 . 50 00
a
1.0000 2.3750 0.7813 10100 2610 1470 11300
5. 00 .000 . 00 0. 5 . 00 0 . 5 00
1.0000 2.4409 0.7150 10500 2730 1640 12100
5. 00 .000 .050 00 0. 5 . 00 0 . 5 00
1.0000 2.4409 0.7500 10500 2730 1640 12100
5. 00 .000 .050 00 0. 5 . 00 0 . 5 00
1.0000 2.4409 0.7500 10500 2730 1640 12100
5. 00 .000 .050 00 0. 5 . 00 0 . 5 00
1.0000 2.4409 0.7500 10500 2730 1640 12100
5. 00 .000 0. 00 0. 5 . 00 0 . 5 00
1.0000 2.4409 0.8125 10500 2730 1640 12100
5. 00 .000 0. 00 0. 5 . 00 0 . 5 00
1.0000 2.4409 0.8125 10500 2730 1640 12100
5. 00 . 00 . 000 0. 5 . 00 000 . 0 00
1.0000 2.4843 0.9375 16000 4140 1800 18400
5. 00 .500 0. 00 0. 5 . 00 0 . 5 00
1.0000 2.5000 0.8125 10500 2730 1640 12100
5. 00 .500 0. 00 0. 5 . 00 0 . 5 00
1.0000 2.5000 0.8125 10500 2730 1640 12100
5. 00 .500 0. 00 0. 5 . 00 0 . 5 00
1.0000 2.5000 0.8125 10500 2730 1640 12100
5. 00 .500 0. 00 0. 5 . 00 0 . 5 00
1.0000 2.5000 0.8125 10500 2730 1640 12100
5. 00 .500 0. 00 0. 5 . 00 0 . 5 00
1.0000 2.5000 0.8125 10500 2730 1640 12100
5. 00 .500 0. 50 00 0. 0. 00 00 0. 0 55 00
1.0000 2.5000 0.8125 11400 2950 3690 12500
5. 00 5.0 . 5 50 00 0. 0. 00 00 0. 0 55 00
1.0000 2.5625 0.8750 11400 2950 3690 12500
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 0 . 00 - . .5 .5 .5 .0 .0 .5 0. 0 . 0 . .0 0.050 0.
0.5614 0.5000 -0.11 0.06 1.16 1.24 0.08 1.89 1.75 0.01 0.06
0.31
. 0 . 00 - . . .5 5.0 .0 .0 .5 0. 0 . 0 . .0 0.050 0.
0.5614 0.5000 -0.11 0.13 1.16 1.38 0.08 1.89 1.75 0.01 0.06
0.30
. 5. 5 - . 0. 0.0 0.5 0. 50.0 .5 . 0 0. 0 0. 5. 0.05 0. 0
0.7810 0.6250 -0.27 0.03 1.18 1.20 0.03 1.97 1.91 0.07 0.01
0.45
. 5. 5 - . 0. 0.0 0.5 . 5 .0 .0 . 0 0. 0 0. 5. 0.05 0.
0.7810 0.6250 -0.27 0.03 1.18 1.20 0.05 2.01 1.93 0.07 0.01
0.52
. . 5 -5. . 0.5 .5 .5 5 .0 5 .0 0.50 . 0 . 0. 0.05 0.
0.6875 0.5313 -0.20 0.05 1.20 1.28 0.06 2.09 2.01 0.02 0.07
0.48
. . - .0 .5 .0 .5 .5 5 .0 .5 . 0 . 0 . . 0.0 0.
0.7650 0.5800 -0.12 0.06 1.30 1.48 0.06 2.13 1.91 0.05 0.05
0.53
. 55 5. 5 -5. . 0.5 .5 .5 5 .5 5 .0 0. 0 . 0 .5 . 0.05 5 0.
0.7620 0.6250 -0.23 0.05 1.20 1.28 0.06 2.11 2.01 0.03 0.04
0.53
. 55 5. 5 -5. .5 0.5 .0 .5 5 .5 5 .0 0. 0 . 0 .5 . 0.05 5 0.
0.7620 0.6250 -0.23 0.14 1.20 1.46 0.06 2.11 2.01 0.03 0.04
0.52
. .55 - . 0. 0.0 0.5 . 5 .0 .5 . 0 0. 0 0. 5. 0.05 0. 5
0.7810 0.6910 -0.27 0.03 1.18 1.20 0.09 2.01 1.91 0.07 0.01
0.54
. 55 5.0 0 -5. . 0.5 .5 . 5 .0 5 .0 0. 0 . 0 .5 . 0.05 5 0. 5
0.7620 0.5937 -0.23 0.05 1.20 1.28 0.05 2.13 2.05 0.03 0.04
0.56
. . -5. 0. .5 .0 .5 5 .0 .5 . 0 . 0 . .5 0.0 0 0.
0.9100 0.7200 -0.20 0.03 1.27 1.42 0.06 2.20 1.95 0.05 0.06
0.71
. 5. 5 -5. . 0.5 .5 .5 5 .0 5 .0 0.50 . 0 . 0. 0.05 0.
0.6875 0.6250 -0.20 0.05 1.20 1.28 0.06 2.13 2.01 0.02 0.07
0.60
. 55 5. 5 -5. . 0.5 .5 . 55.0 5 .0 0. 0 . 0 .5 . 0.05 5 0.
0.7620 0.6250 -0.23 0.05 1.20 1.28 0.05 2.17 2.05 0.03 0.04
0.61
. 55 5. 5 -5. .5 0.5 .0 . 55.0 5 .0 0. 0 . 0 .5 . 0.05 5 0.
0.7620 0.6250 -0.23 0.14 1.20 1.46 0.05 2.17 2.05 0.03 0.04
0.60
.050 . - . . .5 .5 . 5 .0 55.0 0. 0 . 0 . .5 0.0 0 0.
0.7500 0.5625 -0.19 0.05 1.28 1.32 0.05 2.28 2.17 0.01 0.07
0.63
0. . -5. .5 .5 .0 . 5 .0 55.0 . 0 .00 . .5 0.0 0 0.
0.8125 0.5625 -0.23 0.14 1.24 1.50 0.05 2.28 2.17 0.05 0.04
0.65
0. . -5. 0. .5 .5 . 5 .0 55.0 . 0 .00 . .5 0.0 0 0. 0
0.8125 0.5625 -0.23 0.03 1.24 1.28 0.05 2.28 2.17 0.05 0.04
0.65
0. . -5. .5 .5 .0 . 5 .0 55.0 . 0 .00 . .5 0.0 0 0. 0
0.8125 0.5625 -0.23 0.06 1.24 1.34 0.05 2.28 2.17 0.05 0.04
0.65
0. 5. 5 -5. .5 .5 .0 . 5 .0 55.0 . 0 .00 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.14 1.24 1.50 0.05 2.28 2.17 0.05 0.04
0.67
0. 5. 5 -5. 0. .5 .5 . 5 .0 55.0 . 0 .00 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.03 1.24 1.28 0.05 2.28 2.17 0.05 0.04
0.68
5. .050 - . . .5 .5 0. 5 .0 5 .0 0. 0 0. 0 . 0.05 0.
1.0013 0.7500 -0.37 0.05 1.24 1.32 0.03 2.32 2.24 0.03 0.03
0.86
0. 5. 5 -5. .5 .5 .0 . 5 .0 5 .0 . 0 .00 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.14 1.24 1.50 0.05 2.32 2.20 0.05 0.04
0.71
0. 5. 5 -5. 0. .5 .5 . 5 .0 5 .0 . 0 .00 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.03 1.24 1.28 0.05 2.32 2.20 0.05 0.04
0.72
0. 5. 5 -5. .5 .5 .0 . 5 .0 5 .0 . 0 .00 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.06 1.24 1.34 0.05 2.32 2.20 0.05 0.04
0.72
0. 5. 5 -5. . .5 .5 .5 5 .0 55.0 . 0 .00 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.05 1.24 1.32 0.06 2.32 2.17 0.05 0.04
0.72
0. 5. 5 -5. 0. .5 .5 .5 5 .0 55.0 . 0 .00 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.03 1.24 1.28 0.06 2.32 2.17 0.05 0.04
0.72
0. 50 . - . . .5 0.5 . 0.0 5 .0 . 0 . 0 . .5 0.0 00 0.
0.8130 0.5780 -0.05 0.09 1.36 1.59 0.09 2.36 2.05 0.11 0.07
0.70
. 5. 5 - . .5 .5 .0 .5 .0 5 .0 . 0 .00 . .5 0.0 00 0.
0.8450 0.6250 -0.09 0.06 1.36 1.54 0.06 2.48 2.09 0.15 0.08
0.78
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
5. 00 . . 000 0. 5 . 00 000 . 0 00
1.0000 2.6150 0.9375 16000 4140 1800 18400
5. 00 . . 5 00 0. . 00 0 . 00 0
1.0000 2.6875 0.8750 14100 3650 2120 16500
5. 00 . . 5 5 00 0. . 5 00 0 00 . 0 0 00 0 0 0
1.0000 2.6875 0.8750 13300 3440 2450 15800
5. 00 . . 5 5 00 0.55 . 0 5500 00 .0 00 M 0 M 0 0
1.0000 2.6875 0.8750 13400 3470 3250 17400
5. 00 . .050 5 00 0. . 00 00 . 0 00 00
1.0000 2.7450 0.7500 12200 3170 1960 13500
5. 00 . 5. 00 00 0.55 . 0 00 00 .0 00 HM 0 HM 0
1.0000 2.8438 1.0000 16000 4140 3870 21200
5. 00 . 5. 00 00 0.55 . 0 00 00 .0 00 HM 0 HM 0A
1.0000 2.8438 1.0000 16000 4140 3870 21200
5. 00 . . 0 00 0. 0 .00 00 00 0. 00 00
1.0000 2.8593 0.9688 14500 3760 3880 14400
5. 00 . 0. 00 0. . 0 00 000 . 0 000 0
1.0000 2.8593 1.1875 19700 5110 2910 22800
5. 00 .0 5 .5 00 0.55 . 0 00 00 .0 00 HM 0 HM
1.0000 2.8750 1.0450 16000 4140 3870 21200
5. 5 . 5.0 00 0. . 0 0 0 .5 00 L 5 L
1.0231 2.0467 0.5910 6260 1620 1040 7400
5. 5 . 50 . 00 0. 5 . 000 550 . 50 00 55 X 55 0
1.0231 2.2500 0.6875 9570 2480 1470 11300
. 5 . .050 00 0. 5 . 00 0 . 5 00 5 0 5
1.0298 2.4375 0.7500 10500 2730 1640 12100
. 5 .000 .050 00 0. 5 . 00 0 . 5 00 5 0 5 5
1.0298 2.4409 0.7500 10500 2730 1640 12100
. . .050 00 0. 5 . 00 0 . 5 00 5 0 -S 5
1.0300 2.4375 0.7500 10500 2730 1640 12100
. . . 000 0. 5 . 00 000 . 0 00
1.0300 2.6150 0.9375 16000 4140 1800 18400
. 5 5 . .050 00 0. . 00 5 0 . 50 00
1.0620 2.3125 0.7500 10100 2610 1470 11300
. 5 0. 5 . 55 00 0. . 00 5 0 . 50 00
1.0620 2.3750 0.7620 10100 2610 1470 11300
. 50. . 00 0. . 0 0 0 .5 00 L L 0
1.0625 1.9800 0.5600 6260 1620 1040 7400
. 5 . 5.0 00 0. . 0 0 0 .5 00 L L
1.0625 2.0467 0.5910 6260 1620 1040 7400
. 5 . 50 . 00 0. 5 . 000 550 . 50 00 55 0 55 0
1.0625 2.2500 0.6875 9570 2480 1470 11300
. 5 . 50 . 00 0.55 . 0 00 0 00 .0 5 00 M 5 M 5 0
1.0625 2.2500 0.7650 10100 2620 2450 11900
. 5 . 50 . 5 00 0. . 00 5 0 . 50 00 X
1.0625 2.2500 0.7813 10100 2610 1470 11300
. 0. 5 . 00 0. 5 . 000 550 . 50 00 55 0 55
1.0625 2.3750 0.7812 9570 2480 1470 11300
. .000 .050 00 0. 5 . 00 0 . 5 00 5 0 5 5
1.0625 2.4409 0.7500 10500 2730 1640 12100
. .500 0. 00 0. 5 . 00 0 . 5 00 5 0 5 50X
1.0625 2.5000 0.8125 10500 2730 1640 12100
. . . 000 0. 5 . 00 000 . 0 00
1.0625 2.6150 0.9375 16000 4140 1800 18400
. . . 0 00 0. 0 .00 00 00 0. 00 0
1.0625 2.8593 0.9688 14500 3760 3880 14400
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
5. .050 - . . .5 .5 . 0.0 5 .0 0. 0 0. 0 . 0.05 0.
1.0013 0.7500 -0.37 0.05 1.24 1.32 0.05 2.36 2.28 0.03 0.03
0.97
. . - . 0. .5 .5 .5 .0 0.0 .00 0. 0 . 0.5 0.0 5 0.
0.9375 0.6875 -0.26 0.03 1.28 1.32 0.06 2.48 2.36 0.04 0.01
0.96
. 5 . -5. 0. .5 .5 .5 .0 5 .0 . 0 0. 0 .5 . 0.0 0.
0.8750 0.6875 -0.20 0.03 1.32 1.36 0.06 2.48 2.32 0.05 0.04
0.94
. 5 . - . 0. .5 .0 .5 5.0 5 .0 . 0 0. 0 . 0 0.0 0.
0.8750 0.6875 -0.11 0.03 1.44 1.46 0.06 2.56 2.28 0.07 0.04
0.97
. .050 - . .5 .5 .5 .5 5.0 .0 0. 0 . 0 . 0. 0.0 0 0. 0
0.7450 0.7500 -0.16 0.06 1.28 1.36 0.06 2.56 2.40 0.02 0.04
0.88
5. 00 . - . 0. .5 .5 . .0 0.0 . 0 . 0 . 0. 0.0 0.5
1.0000 0.7812 -0.18 0.03 1.56 1.56 0.09 2.72 2.36 0.07 0.07
1.28
5. 00 . - . 0. .5 .5 0. .0 .0 . 0 . 0 . 0. 0.0 0.5
1.0000 0.7812 -0.18 0.03 1.56 1.56 0.03 2.72 2.40 0.07 0.07
1.29
. 5 . - . . .5 .0 .5 .0 .0 .00 . 0 5. 0.0 0.50
0.9550 0.6875 -0.16 0.09 1.44 1.61 0.06 2.68 2.40 0.12 0.09
1.09
. . - 0. 0. 5.0 5.5 . .0 .0 * * . . 0.0 0. 5
1.1810 0.9375 -0.40 0.03 1.38 1.40 0.13 2.64 2.40 * *
1.43
5. 00 0. 5 - . 0. .5 .5 . .0 0.0 . 0 . 0 . 0. 0.0 0.
1.0000 0.8262 -0.18 0.03 1.56 1.56 0.09 2.72 2.36 0.07 0.07
1.35
. . 00 - . .5 0.0 .5 .0 .0 .5 0. 0 0.50 . . 0.05 0.
0.5800 0.5000 -0.13 0.14 1.18 1.44 0.08 1.89 1.75 0.03 0.02
0.30
. . 5 -5. .5 .0 .5 .5 5 .0 5 .0 * * . 0. 0.05 0.
0.6875 0.5313 -0.20 0.14 1.22 1.48 0.06 2.09 2.01 * *
0.46
0. . -5. 0. .5 .0 .0 5 .0 5 .0 . 0 .00 . .5 0.0 0 0.
0.8125 0.5625 -0.23 0.03 1.28 1.30 0.08 2.28 2.13 0.05 0.04
0.64
0. . -5. 0. .5 .0 . 5 .0 55.0 . 0 .00 . .5 0.0 0 0.
0.8125 0.5625 -0.23 0.03 1.28 1.30 0.05 2.28 2.17 0.05 0.04
0.64
. . -5. 0. .5 .5 .0 5 .0 5 .0 . 0 . 0 . . 0.0 0 0.
0.7850 0.5625 -0.23 0.03 1.32 1.32 0.08 2.28 2.13 0.05 0.07
0.64
5. .050 - . .5 .0 .5 . 0.0 5 .0 0. 0 0. 0 . 0.05 0.
1.0013 0.7500 -0.37 0.06 1.26 1.36 0.05 2.36 2.28 0.03 0.03
0.95
. 55 5.0 0 -5. 0. .5 .5 . 5 .0 5 .0 0. 0 . 0 .5 . 0.05 5 0.
0.7620 0.5937 -0.23 0.03 1.24 1.28 0.05 2.13 2.05 0.03 0.04
0.54
. 55 5. 5 -5. 0. .5 .5 . 55.0 5 .0 0. 0 . 0 .5 . 0.05 5 0.
0.7620 0.6250 -0.23 0.03 1.24 1.28 0.05 2.17 2.05 0.03 0.04
0.59
. 0. - . .5 .0 .5 . .0 .5 0. 0 0. 0 . . 0.05 0.
0.5800 0.4200 -0.13 0.14 1.22 1.48 0.05 1.85 1.75 0.03 0.02
0.26
. . 00 - . .5 .0 .5 .0 .0 .5 0. 0 0. 0 . . 0.05 0.
0.5800 0.5000 -0.13 0.14 1.22 1.48 0.08 1.89 1.75 0.03 0.02
0.30
. . 5 -5. .5 .0 .5 .5 5 .0 5 .0 0.50 . 0 . 0. 0.05 0. 0
0.6875 0.5313 -0.20 0.14 1.26 1.52 0.06 2.09 2.01 0.02 0.07
0.45
. . - .0 .5 .0 .5 .5 5 .0 .5 . 0 . 0 . . 0.0 0.
0.7650 0.5800 -0.12 0.06 1.30 1.52 0.06 2.13 1.91 0.05 0.05
0.51
. 55 5. 5 -5. . .5 .5 .5 5 .5 5 .0 0. 0 . 0 .5 . 0.05 5 0.
0.7620 0.6250 -0.23 0.13 1.24 1.48 0.06 2.11 2.01 0.03 0.04
0.50
. 5. 5 -5. .5 .0 .5 .5 5 .0 5 .0 0.50 . 0 . 0. 0.05 0.
0.6875 0.6250 -0.20 0.14 1.26 1.52 0.06 2.13 2.01 0.02 0.07
0.57
0. . -5. 0. .0 .5 . 5 .0 55.0 . 0 .00 . .5 0.0 0 0.
0.8125 0.5625 -0.23 0.03 1.30 1.32 0.05 2.28 2.17 0.05 0.04
0.63
0. 5. 5 -5. 0. .0 .5 .5 5 .0 55.0 . 0 .00 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.03 1.30 1.32 0.06 2.32 2.17 0.05 0.04
0.70
5. .050 - . .5 .0 5.0 . 0.0 5 .0 0. 0 0. 0 . 0.05 0.
1.0013 0.7500 -0.37 0.06 1.30 1.38 0.05 2.36 2.28 0.03 0.03
0.94
. 5 . - . . .5 .0 .5 .0 .0 .00 . 0 5. 0.0 0.
0.9550 0.6875 -0.16 0.09 1.44 1.65 0.06 2.68 2.40 0.12 0.09
1.07
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
.000 5 . 5. 0 500 0. . 0 0 . 00
JLM 0 LM 0 0
0 X 0
J 55 5 55 0
5 0
55 0 55 0
5
5
LM 0 LM 0 0
5
5 5 5
5 5 5
5 5
0
5 5 50
5 5 50
5 5 50X
M M 0
0
0 0 0
5 5
5 5 -S
5
0
1.0630 2.3280 0.6250 8210 2130 1500 10000
. . 0.500 5 00 0. . 5 00 0 00 . 0 0 00
B
Caption:
1.1019 2.6373 0.8071 13300 3440 2450 15800
.000 5 . 50 . 0 00 0. 5 . 000 550 . 50 00
1.1024 2.2500 0.6875 9570 2480 1470 11300
.5 5 5 . . 5 00 0. . 00 5 0 . 50 00
1.1250 2.2400 0.7813 10100 2610 1470 11300
.5 5 5 . 50 . 00 0. 5 . 000 550 . 50 00
1.1250 2.2500 0.6875 9570 2480 1470 11300
.5 5 5 . 50 . 5 00 0. . 00 5 0 . 50 00
Caption:
1.1250 2.2500 0.7813 10100 2610 1470 11300
.5 5 5 . .050 00 0. . 00 5 0 . 50 00
1.1250 2.3125 0.7500 10100 2610 1470 11300
.5 5 5 . 5. 5 500 0. . 0 0 . 00
1.1250 2.3280 0.6250 8210 2130 1500 10000
.5 5 0. 5 . 5 00 0. . 00 5 0 . 50 00
T
C
1.1250 2.3750 0.7813 10100 2610 1470 11300
.5 5 .000 .050 00 0. 5 . 00 0 . 5 00
1.1250 2.4409 0.7500 10500 2730 1640 12100
.5 5 .000 .050 00 0. 5 . 00 0 . 5 00
D
1.1250 2.4409 0.7500 10500 2730 1640 12100
.5 5 .000 0. 00 0. 5 . 00 0 . 5 00
B
d
1.1250 2.4409 0.8125 10500 2730 1640 12100
.5 5 . 00 . 000 0. 5 . 00 000 . 0 00
1.1250 2.4843 0.9375 16000 4140 1800 18400
.5 5 .500 0. 00 0. 5 . 00 0 . 5 00
a
1.1250 2.5000 0.8125 10500 2730 1640 12100
.5 5 .500 0. 00 0. 5 . 00 0 . 5 00
1.1250 2.5000 0.8125 10500 2730 1640 12100
.5 5 .500 0. 00 0. 5 . 00 0 . 5 00
1.1250 2.5000 0.8125 10500 2730 1640 12100
.5 5 . . 55 00 0.55 . 0 500 500 .0 00
1.1250 2.5312 0.8438 12500 3250 3040 16100
.5 5 . .050 5 00 0. . 00 0 . 55 00
1.1250 2.6150 0.7500 11600 3010 1750 12400
.5 5 . . 000 0. 5 . 00 000 . 0 00
1.1250 2.6150 0.9375 16000 4140 1800 18400
.5 5 . . 5 00 0. . 00 0 . 00
1.1250 2.6875 0.8750 14100 3650 2120 16500
.5 5 . . 5 5 00 0. . 5 00 0 00 . 0 0 00
1.1250 2.6875 0.8750 13300 3440 2450 15800
.5 5 . .050 5 00 0. . 00 00 . 0 00
1.1250 2.7450 0.7500 12200 3170 1960 13500
.5 5 . 50 . 500 0. . 0 00 0 . 00
1.1250 2.7500 0.9375 17400 4520 2120 21200
.5 5 . 50 . 500 0. . 0 00 0 . 00
1.1250 2.7500 0.9375 17400 4520 2120 21200
.5 5 .000 .000 5 00 0. . 00 00 . 0 00
1.1250 2.8346 0.7480 12200 3170 1960 13500
.5 5 . . 0 00 0. 0 .00 00 00 0. 00
1.1250 2.8593 0.9688 14500 3760 3880 14400
.5 5 . . 0 00 0. 0 .00 00 00 0. 00
1.1250 2.8593 0.9688 14500 3760 3880 14400
.5 5 . 0. 00 0. . 0 00 000 . 0 000
1.1250 2.8593 1.1875 19700 5110 2910 22800
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. . - .0 0.5 .0 .5 . 5 .0 5 .0 0. 0 0. 0 . . 0.0 0.
0.6600 0.4650 -0.12 0.02 1.30 1.32 0.05 2.20 2.05 0.03 0.03
0.47
0.500 .000 -5. 0. 5.5 .5 .5 .0 5 .0 . 0 . 0 .5 . 0.0 0.
0.8071 0.6299 -0.20 0.03 1.40 1.44 0.06 2.44 2.32 0.05 0.10
0.80
. . 5 -5. .5 .5 .0 .5 5 .0 5 .0 * * . 0. 0.05 0. 0
0.6875 0.5313 -0.20 0.14 1.28 1.54 0.06 2.09 2.01 * *
0.44
. 55 5. 5 -5. 0. .5 .0 0. 5 .5 5 .0 0. 0 . 0 .5 . 0.05 5 0.
0.7620 0.6250 -0.23 0.03 1.32 1.34 0.03 2.11 2.01 0.03 0.04
0.48
. . 5 -5. .5 .5 .5 .5 5 .0 5 .0 0.50 . 0 . 0. 0.05 0.
0.6875 0.5313 -0.20 0.14 1.32 1.56 0.06 2.09 2.01 0.02 0.07
0.43
. 55 5. 5 -5. 0. .5 .0 .5 5 .5 5 .0 0. 0 . 0 .5 . 0.05 5 0.
0.7620 0.6250 -0.23 0.03 1.32 1.34 0.06 2.11 2.01 0.03 0.04
0.49
. 55 5.0 0 -5. 0. .5 .0 . 5 .0 5 .0 0. 0 . 0 .5 . 0.05 5 0.
0.7620 0.5937 -0.23 0.03 1.32 1.34 0.05 2.13 2.05 0.03 0.04
0.51
. . - .0 0.0 5.0 .5 . 5 .0 5 .0 0. 0 0. 0 . . 0.0 0. 0
0.6600 0.4650 -0.12 0.00 1.38 1.63 0.05 2.20 2.05 0.03 0.03
0.44
. 55 5. 5 -5. 0. .5 .0 . 55.0 5 .0 0. 0 . 0 .5 . 0.05 5 0.
0.7620 0.6250 -0.23 0.03 1.32 1.34 0.05 2.17 2.05 0.03 0.04
0.57
0. . -5. .5 .0 0.0 . 5 .0 55.0 . 0 .00 . .5 0.0 0 0.
0.8125 0.5625 -0.23 0.14 1.34 1.57 0.05 2.28 2.17 0.05 0.04
0.60
0. . -5. 0. .0 .5 . 5 .0 55.0 . 0 .00 . .5 0.0 0 0.
0.8125 0.5625 -0.23 0.03 1.34 1.36 0.05 2.28 2.17 0.05 0.04
0.61
0. 5. 5 -5. .5 .0 0.0 . 5 .0 55.0 . 0 .00 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.14 1.34 1.57 0.05 2.28 2.17 0.05 0.04
0.62
5. .050 - . . .0 .0 0. 5 .0 5 .0 0. 0 0. 0 . 0.05 0.
1.0013 0.7500 -0.37 0.05 1.34 1.42 0.03 2.32 2.24 0.03 0.03
0.80
0. 5. 5 -5. .5 .0 0.0 . 5 .0 5 .0 . 0 .00 . .5 0.0 0 0. 0
0.8125 0.6250 -0.23 0.14 1.34 1.57 0.05 2.32 2.20 0.05 0.04
0.66
0. 5. 5 -5. 0. .0 .5 . 5 .0 5 .0 . 0 .00 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.03 1.34 1.36 0.05 2.32 2.20 0.05 0.04
0.67
0. 5. 5 -5. .5 .0 0.0 .5 5 .0 55.0 . 0 .00 . .5 0.0 0 0. 0
0.8125 0.6250 -0.23 0.14 1.34 1.57 0.06 2.32 2.17 0.05 0.04
0.66
. . 0 - . .5 .0 0.0 .5 .0 5 .0 . 0 . 0 . . 0.0 0. 5
0.8438 0.6563 -0.13 0.06 1.50 1.57 0.06 2.40 2.13 0.05 0.05
0.77
. 5. 5 - . .5 .0 .0 .5 .0 5 .0 0. 0 .50 . 0.05 0.
0.7470 0.6250 -0.19 0.06 1.34 1.42 0.06 2.40 2.28 0.02 0.06
0.69
5. .050 - . . .0 .0 . 0.0 5 .0 0. 0 0. 0 . 0.05 0.
1.0013 0.7500 -0.37 0.05 1.34 1.42 0.05 2.36 2.28 0.03 0.03
0.91
. . - . 0. 5.0 .0 .5 .0 0.0 .00 0. 0 . 0.5 0.0 5 0.
0.9375 0.6875 -0.26 0.03 1.38 1.42 0.06 2.48 2.36 0.04 0.01
0.90
. 5 . -5. 0. .0 .5 .5 .0 5 .0 . 0 0. 0 .5 . 0.0 0. 0
0.8750 0.6875 -0.20 0.03 1.42 1.44 0.06 2.48 2.32 0.05 0.04
0.89
. .050 - . .5 5.0 .0 .5 5.0 .0 0. 0 . 0 . 0. 0.0 0 0.
0.7450 0.7500 -0.16 0.06 1.38 1.46 0.06 2.56 2.40 0.02 0.04
0.83
5. 5 .050 - . . 5.0 .0 . .0 .0 0. 0 0. 0 . . 0.0 5 0.
0.9983 0.7500 -0.34 0.09 1.38 1.54 0.05 2.52 2.40 0.04 0.03
1.06
5. 5 .050 - . . 5.0 .0 .5 .0 .0 0. 0 0. 0 . . 0.0 5 0.
0.9983 0.7500 -0.34 0.09 1.38 1.54 0.06 2.52 2.40 0.04 0.03
1.06
. 5. 5 - . .5 5.0 .0 .5 5.0 .0 0. 0 . 0 . 0. 0.0 0 0.
0.7450 0.6250 -0.16 0.06 1.38 1.46 0.06 2.56 2.44 0.02 0.04
0.87
. 5 . - . . .5 .0 .5 .0 .0 .00 . 0 5. 0.0 0.
0.9550 0.6875 -0.16 0.19 1.44 1.89 0.06 2.68 2.40 0.12 0.09
1.02
. 5 . - . .5 .5 .5 .5 .0 .0 .00 . 0 5. 0.0 0.
0.9550 0.6875 -0.16 0.06 1.44 1.63 0.06 2.68 2.40 0.12 0.09
1.04
. . - 0. .5 .0 .5 . .0 .0 .50 0.50 . . 0.0 0.
1.1810 0.9375 -0.40 0.14 1.46 1.71 0.13 2.64 2.40 0.06 0.02
1.35
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
.5 5 . 0. 00 0. . 0 00 000 . 0 000
0
0 0 0
0 0 0
00
L 5 L 5 0
0
A
5 5 5 5
5 5 5
5 5
5 5 X
5 5 50
0 A 0 0A
AS
00
00
-S
A A
A
A
5 5
1.1250 2.8593 1.1875 19700 5110 2910 22800
.5 5 .0 5 . 5 0 00 0. 5 . 5 00 00 . 00
B
Caption:
1.1250 2.8750 0.8750 13700 3550 2750 16800
.5 5 .0 5 . 5 0 00 0. 5 . 5 00 00 . 00
1.1250 2.8750 0.8750 13700 3550 2750 16800
.5 5 . 00 .000 5 00 0. . 00 00 . 0 00
1.1250 3.0000 0.7480 12200 3170 1960 13500
.5 5 . 00 0. 00 0. . 0 00 000 . 0 000
1.1250 3.0000 1.1875 19700 5110 2910 22800
.5 5 . 5 5. 00 00 0. 0. 0 00 00 0. 00
Caption:
1.1250 3.1250 1.0000 16200 4190 4790 17100
.000 50. . 00 0. . 0 550 .5 00
1.1417 1.9800 0.5600 6230 1620 1020 8130
. . . 000 0. 5 . 00 000 . 0 00
1.1562 2.6150 0.9375 16000 4140 1800 18400
. . . 000 0. 5 . 00 000 . 0 00
T
C
1.1562 2.6150 0.9375 16000 4140 1800 18400
. . .00 0000 0. .5 0 00 00 .5 00
1.1806 2.4402 0.6300 9000 2330 1530 9910
. .000 .00 0000 0. .5 0 00 00 .5 00
D
1.1806 2.4409 0.6300 9000 2330 1530 9910
. .000 . 00 0. 5 . 00 0 . 5 00
B
d
1.1806 2.4409 0.7150 10500 2730 1640 12100
. .000 .050 00 0. 5 . 00 0 . 5 00
1.1806 2.4409 0.7500 10500 2730 1640 12100
. .000 0. 00 0. 5 . 00 0 . 5 00
a
1.1806 2.4409 0.8125 10500 2730 1640 12100
. .000 0. 00 0. 5 . 00 0 . 5 00
1.1806 2.4409 0.8125 10500 2730 1640 12100
. .500 0. 00 0. 5 . 00 0 . 5 00
1.1806 2.5000 0.8125 10500 2730 1640 12100
. . .000 5 00 0. . 5 00 0 00 . 0 0 00
1.1806 2.6875 0.8268 13300 3440 2450 15800
. .0 . 5 50 00 0. .5 00 5 0 .5 00
1.1806 2.7170 0.7813 11400 2950 1930 13900
. .000 .000 5 00 0. . 00 00 . 0 00
1.1806 2.8346 0.7480 12200 3170 1960 13500
. . 00 .000 5 00 0. . 00 00 . 0 00
1.1806 3.0000 0.7480 12200 3170 1960 13500
. . 00 . 0 00 0. 0. 0 00 00 0. 00
1.1806 3.0000 0.9688 16200 4190 4790 17100
0.000 .000 .00 0000 0. .5 0 00 00 .5 00
1.1811 2.4409 0.6300 9000 2330 1530 9910
0.000 . 5 . 5 50 00 0. .5 00 5 0 .5 00
1.1811 2.7148 0.7813 11400 2950 1930 13900
0.000 .0 . 5 50 00 0. .5 00 5 0 .5 00
1.1811 2.7170 0.7813 11400 2950 1930 13900
0.000 .0 . 5 50 00 0. .5 00 5 0 .5 00
1.1811 2.7170 0.7813 11400 2950 1930 13900
0.000 .0 . 5 50 00 0. .5 00 5 0 .5 00
1.1811 2.7170 0.7813 11400 2950 1930 13900
0.000 .0 . 5 50 00 0. .5 00 5 0 .5 00
1.1811 2.7170 0.7813 11400 2950 1930 13900
0.000 . 50 . 500 0. . 0 00 0 . 00
1.1811 2.7500 0.9375 17400 4520 2120 21200
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B 0 TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. . - 0. . .0 .0 . .0 .0 .50 0.50 . . 0.0 0.
1.1810 0.9375 -0.40 0.05 1.46 1.54 0.13 2.64 2.40 0.06 0.02
1.36
. 5 . - . 0. .0 .5 . .0 .0 . 0 0. 0 0. 0. 0.0 0 0.
0.8750 0.6875 -0.15 0.03 1.46 1.48 0.13 2.68 2.44 0.06 0.04
1.05
. 5 . - . 0. .0 .5 0. .0 .0 . 0 0. 0 0. 0. 0.0 0 0.
0.8750 0.6875 -0.15 0.03 1.46 1.48 0.03 2.68 2.52 0.06 0.04
1.07
. 5. 5 - . .5 5.0 .0 .5 .0 .0 0. 0 . 0 . 0. 0.0 0 0. 5
0.7450 0.6250 -0.16 0.06 1.38 1.46 0.06 2.60 2.52 0.02 0.04
1.00
. . - 0. . .0 .0 0. .0 5.0 .50 0.50 . . 0.0 0.
1.1810 0.9375 -0.40 0.05 1.46 1.54 0.03 2.72 2.56 0.06 0.02
1.55
.0 . - .0 0. .5 .5 .5 .0 .0 . 0 . 0 . .5 0.0 0.
0.9478 0.6875 -0.08 0.03 1.63 1.67 0.06 2.91 2.64 0.13 0.09
1.35
. 0. - . .5 .5 0.0 . .0 .5 0.50 0. 0 0. . 0.055 0.
0.5800 0.4200 -0.13 0.14 1.32 1.57 0.05 1.89 1.75 0.02 0.03
0.25
5. .050 - . .5 5.0 .0 . 0.0 5 .0 0. 0 0. 0 . 0.05 0. 0
1.0013 0.7500 -0.37 0.14 1.38 1.61 0.05 2.36 2.28 0.03 0.03
0.88
5. .050 - . 0. .5 .5 . 0.0 5 .0 0. 0 0. 0 . 0.05 0.
1.0013 0.7500 -0.37 0.03 1.44 1.48 0.05 2.36 2.28 0.03 0.03
0.89
.5 . - . .5 .5 .0 .5 5 .0 5 .0 0. 0 . 0 . . 0.05 0.
0.6522 0.5625 -0.14 0.06 1.36 1.46 0.06 2.24 2.13 0.01 0.07
0.50
.5 . - . .5 .5 .0 .5 5 .0 5 .0 0. 0 . 0 . . 0.05 0.
0.6522 0.5625 -0.14 0.06 1.36 1.46 0.06 2.24 2.13 0.01 0.07
0.50
.050 . - . . .0 .5 . 5 .0 55.0 0. 0 . 0 . .5 0.0 0 0.
0.7500 0.5625 -0.19 0.05 1.42 1.48 0.05 2.28 2.17 0.01 0.07
0.56
0. . -5. . 5.0 .5 . 5 .0 55.0 . 0 . 0 . .5 0.0 0 0.
0.8125 0.5625 -0.23 0.05 1.38 1.44 0.05 2.28 2.17 0.05 0.04
0.58
0. 5. 5 -5. . 5.0 .5 . 5 .0 55.0 . 0 . 0 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.05 1.38 1.44 0.05 2.28 2.17 0.05 0.04
0.61
0. 5. 5 -5. . 5.0 .5 .5 5 .0 55.0 . 0 . 0 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.05 1.38 1.44 0.06 2.28 2.17 0.05 0.04
0.61
0. 5. 5 -5. . 5.0 .5 . 5 .0 5 .0 . 0 . 0 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.05 1.38 1.44 0.05 2.32 2.20 0.05 0.04
0.65
. 5 . -5. 0. .5 .5 .5 .0 5 .0 . 0 0. 0 .5 . 0.0 0.
0.8750 0.6393 -0.20 0.03 1.52 1.56 0.06 2.48 2.32 0.05 0.04
0.84
. 0 5. 5 - . 0. .0 .5 . .0 0.0 .00 . 0 . 0.0 0.
0.7560 0.6250 -0.17 0.03 1.46 1.48 0.05 2.48 2.36 0.04 0.07
0.80
. 5. 5 - . .5 .0 .0 .5 5.0 .0 0. 0 . 0 . 0. 0.0 0 0.
0.7450 0.6250 -0.16 0.06 1.42 1.50 0.06 2.56 2.44 0.02 0.04
0.85
. 5. 5 - . .5 .0 .0 .5 .0 .0 0. 0 . 0 . 0. 0.0 0 0.
0.7450 0.6250 -0.16 0.06 1.42 1.50 0.06 2.60 2.52 0.02 0.04
0.98
.0 . 0 - .0 .5 .0 .5 . .0 .0 . 0 . 0 . .5 0.0 0.5
0.9478 0.6563 -0.08 0.06 1.66 1.75 0.13 2.87 2.52 0.13 0.09
1.16
.5 . - . .5 .5 .0 .5 5 .0 5 .0 0. 0 . 0 . . 0.05 0.
0.6522 0.5625 -0.14 0.06 1.36 1.46 0.06 2.24 2.13 0.01 0.07
0.50
.5 5. 5 - . .5 0.0 .0 . .0 5 .0 .00 . 0 . 0.0 0. 5
0.7710 0.6250 -0.17 0.14 1.57 1.69 0.13 2.48 2.32 0.04 0.06
0.78
. 0 5. 5 - . 0. .5 .0 . .0 5 .0 .00 . 0 . 0.0 0. 5
0.7560 0.6250 -0.17 0.03 1.44 1.46 0.13 2.48 2.32 0.04 0.07
0.78
. 0 5. 5 - . 0. .5 .0 . .0 0.0 .00 . 0 . 0.0 0.
0.7560 0.6250 -0.17 0.03 1.44 1.46 0.05 2.48 2.36 0.04 0.07
0.79
.5 5. 5 - . .5 0.0 .0 . .0 0.0 .00 . 0 . 0.0 0.
0.7710 0.6250 -0.17 0.14 1.57 1.69 0.05 2.48 2.36 0.04 0.06
0.80
.5 5. 5 - . .5 .0 .0 . .0 5 .0 .00 . 0 . 0.0 0.
0.7710 0.6250 -0.17 0.14 1.46 1.69 0.13 2.48 2.32 0.04 0.06
0.78
5. 5 .050 - . .5 .0 .5 . .0 .0 0. 0 0. 0 . . 0.0 5 0.
0.9983 0.7500 -0.34 0.14 1.42 1.67 0.05 2.52 2.40 0.04 0.03
1.02
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
0.000 . 50 . 500 0. . 0 00 0 . 00 5 0X 5
1.1811 2.7500 0.9375 17400 4520 2120 21200
0.000 . 50 . 500 0. . 0 00 0 . 00 5 0X 5 -S
1.1811 2.7500 0.9375 17400 4520 2120 21200
0.000 .000 .000 5 00 0. . 00 00 . 0 00 -S -S
1.1811 2.8346 0.7480 12200 3170 1960 13500
0.000 .000 . 500 0. . 0 00 0 . 00 5 0X 5 X
1.1811 2.8346 0.9375 17400 4520 2120 21200
0.000 .000 . 0 0 00 0.55 . 0 0 00 500 .0 000 JHM 5 0 JHM 5
1.1811 2.8346 1.1563 18100 4700 4390 24900
0.000 .0 . 500 0. . 0 00 0 . 00 5 5 5
1.1811 2.8355 0.9375 17400 4520 2120 21200
0.000 .0 0. 00 0. . 0 00 000 . 0 000 0
1.1811 2.8360 1.1875 19700 5110 2910 22800
0.000 .0 5 . 5 50 00 0. .5 00 5 0 .5 00
1.1811 2.8380 0.8813 11400 2950 1930 13900
0.000 .0 5 . 5 50 00 0. .5 00 5 0 .5 00 A
1.1811 2.8380 0.8813 11400 2950 1930 13900
0. .000 .050 00 0. 5 . 00 0 . 5 00 5 5 5
1.1855 2.4409 0.7500 10500 2730 1640 12100
0. .500 0. 00 0. 5 . 00 0 . 5 00 5 5 50
1.1855 2.5000 0.8125 10500 2730 1640 12100
0. 5 . . 00 0. . 0 0 . 5000 0 0
1.1875 2.3125 0.5781 6600 1710 1390 7880
0. 5 . . 00 0. . 0 0 . 5000 0 0
1.1875 2.3145 0.5781 6600 1710 1390 7880
0. .000 .00 0000 0. .5 0 00 00 .5 00
1.1875 2.4409 0.6300 9000 2330 1530 9910
0. . . 55 00 0.55 . 0 500 500 .0 00 M M 0
1.1875 2.5312 0.8438 12500 3250 3040 16100
0. . . 55 00 0.55 . 0 500 500 .0 00 M P M 0P
1.1875 2.5312 0.8438 12500 3250 3040 16100
0. . .050 5 00 0. . 00 0 . 55 00
1.1875 2.6150 0.7500 11600 3010 1750 12400
0. . 5. 00 500 0. . 0 00 0 . 00 55 5 0
1.1875 2.6150 1.0000 17400 4520 2120 21200
0. . 50 . 500 0. . 0 00 0 . 00 55 5
1.1875 2.7500 0.9375 17400 4520 2120 21200
0. . 50 . 500 0. . 0 00 0 . 00 55 5 -S
1.1875 2.7500 0.9375 17400 4520 2120 21200
0. . 0. 00 0. . 0 00 000 . 0 000 0
1.1875 2.8593 1.1875 19700 5110 2910 22800
0. . 0. 00 0. . 0 00 000 . 0 000 0
1.1875 2.8593 1.1875 19700 5110 2910 22800
0. . 00 0. 5 00 0. 0 . 5 00 0500 . 5 00 00
1.1875 3.0000 0.8125 13200 3430 2360 15500
0. . 00 . 0 00 0. 0. 0 00 00 0. 00 00
1.1875 3.0000 0.9688 16200 4190 4790 17100
0. . 5 5. 00 00 0. 0. 0 00 00 0. 00
1.1875 3.1250 1.0000 16200 4190 4790 17100
0. 0.000 .00 5 00 0. 0 . 5 00 0500 . 5 00 5
1.1875 3.1496 0.8270 13200 3430 2360 15500
0. 5 .000 .050 00 0. 5 . 00 0 . 5 00 5 0A 5 5
1.1880 2.4409 0.7500 10500 2730 1640 12100
0. .000 0. 00 0. 5 . 00 0 . 5 00 5 5
1.1895 2.4409 0.8125 10500 2730 1640 12100
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
5. 5 .050 - . .0 .0 .5 . .0 .0 0. 0 0. 0 . . 0.0 5 0.
0.9983 0.7500 -0.34 0.08 1.42 1.56 0.05 2.52 2.40 0.04 0.03
1.03
5. 5 .050 - . .0 .0 .5 .5 .0 .0 0. 0 0. 0 . . 0.0 5 0.
0.9983 0.7500 -0.34 0.08 1.42 1.56 0.06 2.52 2.40 0.04 0.03
1.03
. 5. 5 - . .5 .0 .0 .0 5.0 .0 0. 0 . 0 . 0. 0.0 0 0.
0.7450 0.6250 -0.16 0.06 1.42 1.50 0.08 2.56 2.44 0.02 0.04
0.84
5. 5 .050 - . .0 .0 .5 .0 5.0 .0 0. 0 0. 0 . . 0.0 5 0.50
0.9983 0.7500 -0.34 0.08 1.42 1.56 0.08 2.56 2.40 0.04 0.03
1.11
. .0 0 -5. . .5 .5 . .0 5 .0 . 0 . 0 . . 0.0 5 0.
1.0938 0.9063 -0.22 0.05 1.67 1.75 0.13 2.72 2.28 0.08 0.07
1.34
5. 5 .050 - . .5 .0 .5 0. 5.0 .0 0. 0 0. 0 . . 0.0 5 0.50
0.9983 0.7500 -0.34 0.14 1.42 1.67 0.03 2.56 2.48 0.04 0.03
1.10
. . - 0. .5 .0 .5 . .0 .0 * * . . 0.0 0.5
1.1810 0.9375 -0.40 0.14 1.50 1.75 0.11 2.64 2.40 * *
1.30
. 0 . 5 - . 0. .5 .0 . 5.0 0.0 .00 . 0 . 0.0 0.
0.7560 0.7250 -0.17 0.03 1.44 1.46 0.09 2.56 2.36 0.04 0.07
0.96
.5 . 5 - . .5 0.0 .0 . 5.0 0.0 .00 . 0 . 0.0 0.
0.7710 0.7250 -0.17 0.14 1.57 1.69 0.09 2.56 2.36 0.04 0.06
0.96
0. . -5. 0. 5.5 .0 . 5 .0 55.0 . 0 .00 . .5 0.0 0 0.
0.8125 0.5625 -0.23 0.03 1.40 1.42 0.05 2.28 2.17 0.05 0.04
0.58
0. 5. 5 -5. 0. 5.5 .0 . 5 .0 5 .0 . 0 .00 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.03 1.40 1.42 0.05 2.32 2.20 0.05 0.04
0.65
5.0 0 0. - . .5 5.0 .5 .0 55.0 5 .0 0. 0 . 0 0. 0. 0.0 0 0.
0.5937 0.4219 -0.05 0.14 1.38 1.63 0.04 2.17 2.05 0.03 0.04
0.38
5.0 0 0. - . .5 5.0 .5 .0 55.0 5 .0 0. 0 . 0 0. 0. 0.0 0 0.
0.5937 0.4219 -0.05 0.14 1.38 1.63 0.04 2.17 2.05 0.03 0.04
0.38
.5 . - . .5 .5 .0 .5 5 .0 5 .0 0. 0 . 0 . . 0.05 0.
0.6522 0.5625 -0.14 0.06 1.36 1.46 0.06 2.24 2.13 0.01 0.07
0.50
. . 0 - . .5 .0 .0 .5 .0 5 .0 . 0 . 0 . . 0.0 0.
0.8438 0.6563 -0.13 0.06 1.50 1.61 0.06 2.40 2.13 0.05 0.05
0.74
. . 0 - . .5 .0 .0 .5 .0 5 .0 . 0 . 0 . . 0.0 0.
0.8438 0.6563 -0.13 0.06 1.50 1.61 0.06 2.40 2.13 0.06 0.05
0.74
. 5. 5 - . .5 5.0 .5 .5 .0 5 .0 0. 0 .50 . 0.05 0. 0
0.7470 0.6250 -0.19 0.06 1.38 1.48 0.06 2.40 2.28 0.02 0.06
0.67
5. 5 0. - . . .5 0.0 0. .5 0.0 0. 0 0. 0 . . 0.0 5 0.
0.9983 0.8125 -0.34 0.09 1.44 1.57 0.03 2.46 2.36 0.04 0.03
0.94
5. 5 .050 - . . .5 0.0 . .0 .0 0. 0 0. 0 . . 0.0 5 0.
0.9983 0.7500 -0.34 0.09 1.44 1.57 0.05 2.52 2.40 0.04 0.03
1.02
5. 5 .050 - . . .5 0.0 .5 .0 .0 0. 0 0. 0 . . 0.0 5 0.
0.9983 0.7500 -0.34 0.09 1.44 1.57 0.06 2.52 2.40 0.04 0.03
1.02
. . - 0. 0. .5 .0 . .0 .0 * * . . 0.0 0. 0
1.1810 0.9375 -0.40 0.03 1.52 1.54 0.13 2.64 2.40 * *
1.33
. . - 0. .5 .5 .5 . .0 .0 * * . . 0.0 0. 0
1.1810 0.9375 -0.40 0.14 1.52 1.75 0.13 2.64 2.40 * *
1.32
0. 0 5.50 - . .5 .5 0.0 . .0 .0 . 0 . 0 0. .5 0.0 0 0.
0.8244 0.6105 -0.19 0.06 1.48 1.57 0.05 2.80 2.68 0.09 0.04
1.04
.0 . 0 - .0 .5 .0 5.0 . .0 .0 . 0 . 0 . .5 0.0 0.5
0.9478 0.6563 -0.08 0.06 1.65 1.77 0.13 2.87 2.52 0.13 0.09
1.16
.0 . - .0 .5 .0 5.0 .5 .0 .0 . 0 . 0 . .5 0.0 0. 0
0.9478 0.6875 -0.08 0.06 1.65 1.77 0.06 2.91 2.64 0.13 0.09
1.31
0. 0 5. 5 - . .5 .5 0.0 .5 .0 .0 . 0 . 0 0. .5 0.0 0 0.5
0.8244 0.6250 -0.19 0.06 1.48 1.57 0.06 2.87 2.72 0.09 0.04
1.17
0. . -5. 0.5 5.5 5.5 . 5 .0 55.0 . 0 . 0 . .5 0.0 0 0.
0.8125 0.5625 -0.23 0.02 1.40 1.40 0.05 2.28 2.17 0.05 0.04
0.58
0. 5. 5 -5. .5 5.5 .5 . 5 .0 55.0 . 0 . 0 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.14 1.40 1.63 0.05 2.28 2.17 0.05 0.04
0.60
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
0. .000 0. 00 0. 5 . 00 0 . 5 00
5 0 5
5 5 50
5 5
5 5 50
5 0 5 50
5 5 50X
5 X 5 0
5 X 5
5 X 5 -S
M A M 0
0
0 5 0
LM 0 5 LM 0 0
LM 0 LM 0 0
LM 0 LM 0 0
LM 0 A LM 0 0
LM 0 5 LM 0
LM 0 LM 0
LM 0 A LM 0
5 5 5
5 5 5 5
5 5 5
5 5 5
5 5
5 5 50
5 5 5 50
5 5 50
1.1895 2.4409 0.8125 10500 2730 1640 12100
0. .500 0. 00 0. 5 . 00 0 . 5 00
B
Caption:
1.1895 2.5000 0.8125 10500 2730 1640 12100
0. .500 0. 00 0. 5 . 00 0 . 5 00
1.1895 2.5000 0.8125 10500 2730 1640 12100
0. .500 0. 00 0. 5 . 00 0 . 5 00
1.1895 2.5000 0.8125 10500 2730 1640 12100
0. .500 0. 00 0. 5 . 00 0 . 5 00
1.1895 2.5000 0.8125 10500 2730 1640 12100
0. .500 0. 00 0. 5 . 00 0 . 5 00
Caption:
1.1895 2.5000 0.8125 10500 2730 1640 12100
0. . 5. 00 500 0. . 0 00 0 . 00
1.1895 2.6150 1.0000 17400 4520 2120 21200
0. . 50 . 500 0. . 0 00 0 . 00
1.1895 2.7500 0.9375 17400 4520 2120 21200
0. . 50 . 500 0. . 0 00 0 . 00
T
C
1.1895 2.7500 0.9375 17400 4520 2120 21200
0. .0 . 5 50 00 0. .5 00 5 0 .5 00
1.1900 2.7170 0.7813 11400 2950 1930 13900
0. 55 . . 55 00 0.55 . 0 500 500 .0 00
D
1.2187 2.5312 0.8438 12500 3250 3040 16100
. . 5 0. 00 0. . 00 0 0 .5 5 00
B
d
1.2450 2.6250 0.8125 10900 2830 1800 13000
. 50 5 . . 00 0. . 0 0 . 5000
1.2500 2.3125 0.5781 6600 1710 1390 7880
. 50 5 . 5. 5 500 0. . 0 0 . 00
a
1.2500 2.3280 0.6250 8210 2130 1500 10000
. 50 5 . 5. 5 500 0. . 0 0 . 00
1.2500 2.3280 0.6250 8210 2130 1500 10000
. 50 5 . 5. 5 500 0. . 0 0 . 00
1.2500 2.3280 0.6250 8210 2130 1500 10000
. 50 5 . 5. 5 500 0. . 0 0 . 00
1.2500 2.3280 0.6250 8210 2130 1500 10000
. 50 . 5. 5 500 0. . 0 0 . 00
1.2500 2.4404 0.6250 8210 2130 1500 10000
. 50 . 5. 5 500 0. . 0 0 . 00
1.2500 2.4404 0.6250 8210 2130 1500 10000
. 50 . 5. 5 500 0. . 0 0 . 00
1.2500 2.4404 0.6250 8210 2130 1500 10000
. 50 .000 . 00 0. 5 . 00 0 . 5 00
1.2500 2.4409 0.7150 10500 2730 1640 12100
. 50 .000 .050 00 0. 5 . 00 0 . 5 00
1.2500 2.4409 0.7500 10500 2730 1640 12100
. 50 .000 .050 00 0. 5 . 00 0 . 5 00
1.2500 2.4409 0.7500 10500 2730 1640 12100
. 50 .000 0. 00 0. 5 . 00 0 . 5 00
1.2500 2.4409 0.8125 10500 2730 1640 12100
. 50 .000 0. 00 0. 5 . 00 0 . 5 00
1.2500 2.4409 0.8125 10500 2730 1640 12100
. 50 .500 . 00 0. 5 . 00 0 . 5 00
1.2500 2.5000 0.7775 10500 2730 1640 12100
. 50 .500 0. 00 0. 5 . 00 0 . 5 00
1.2500 2.5000 0.8125 10500 2730 1640 12100
. 50 .500 0. 00 0. 5 . 00 0 . 5 00
1.2500 2.5000 0.8125 10500 2730 1640 12100
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
0. 5. 5 -5. 0. 5.5 .0 . 5 .0 55.0 . 0 .00 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.03 1.40 1.42 0.05 2.28 2.17 0.05 0.04
0.61
0. 5. 5 -5. .5 5.5 .5 . 5 .0 5 .0 . 0 . 0 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.14 1.40 1.63 0.05 2.32 2.20 0.05 0.04
0.64
0. 5. 5 -5. .5 5.5 .5 .5 5 .0 55.0 * * . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.06 1.40 1.48 0.06 2.32 2.17 * *
0.64
0. 5. 5 -5. .5 5.5 .5 . 5 .0 5 .0 * * . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.06 1.40 1.48 0.05 2.32 2.20 * *
0.64
0. 5. 5 -5. 0. 5.5 .0 . 5 .0 5 .0 . 0 .00 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.03 1.40 1.42 0.05 2.32 2.20 0.05 0.04
0.65
0. 5. 5 -5. .5 5.5 .5 .5 5 .0 55.0 . 0 . 0 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.14 1.40 1.63 0.06 2.32 2.17 0.05 0.04
0.63
. 0. - . . .5 0.0 . .5 5 .0 0. 0 . 0 . . 0.0 5 0.
0.9730 0.8125 -0.34 0.09 1.44 1.57 0.13 2.46 2.24 0.04 0.06
0.91
. .050 - . . .5 0.0 . .0 .0 0. 0 . 0 . . 0.0 5 0.
0.9730 0.7500 -0.34 0.09 1.44 1.57 0.05 2.52 2.40 0.04 0.06
1.02
. .050 - . . .5 0.0 .5 .0 .0 0. 0 . 0 . . 0.0 5 0.
0.9730 0.7500 -0.34 0.09 1.44 1.57 0.06 2.52 2.40 0.04 0.06
1.02
.5 5. 5 - . 0. .0 .0 . .0 0.0 .00 . 0 . 0.0 0.
0.7710 0.6250 -0.17 0.03 1.46 1.50 0.05 2.48 2.36 0.04 0.06
0.80
. . 0 - . .5 .0 .0 .5 .0 5 .0 . 0 . 0 . . 0.0 0.
0.8438 0.6563 -0.13 0.06 1.50 1.65 0.06 2.40 2.13 0.05 0.05
0.73
0. 5. 5 -5. .5 .0 .5 .5 .0 5 .0 .50 .00 . . 0.0 0.
0.8125 0.6250 -0.21 0.06 1.46 1.56 0.06 2.40 2.28 0.06 0.04
0.72
5.0 0 0. - . .0 .0 .5 .0 55.0 5 .0 0. 0 . 0 0. 0. 0.0 0 0.
0.5937 0.4219 -0.05 0.04 1.42 1.48 0.04 2.17 2.05 0.03 0.04
0.37
.500 . - .0 .0 .0 .5 . 5 .0 5 .0 0. 0 - . 0 . . 0.0 0.
0.7283 0.4650 -0.12 0.08 1.42 1.56 0.05 2.20 2.05 0.03 -0.04
0.42
. . - .0 . .0 0.0 . 5 .0 5 .0 0. 0 0. 0 . . 0.0 0.
0.6600 0.4650 -0.12 0.09 1.42 1.57 0.05 2.20 2.05 0.03 0.03
0.41
. . - .0 .5 .0 .5 . 5 .0 5 .0 0. 0 0. 0 . . 0.0 0.
0.6600 0.4650 -0.12 0.14 1.42 1.67 0.05 2.20 2.05 0.03 0.03
0.39
. . - .0 0. .0 .0 . 5 .0 5 .0 0. 0 0. 0 . . 0.0 0.
0.6600 0.4650 -0.12 0.03 1.42 1.46 0.05 2.20 2.05 0.03 0.03
0.41
.500 . - .0 .0 .0 .5 . 5 .0 5 .0 0. 0 - . 0 . . 0.0 0.
0.7283 0.4650 -0.12 0.08 1.42 1.56 0.05 2.24 2.13 0.03 -0.04
0.47
. . - .0 .5 .0 .5 . 5 .0 5 .0 0. 0 0. 0 . . 0.0 0. 0
0.6600 0.4650 -0.12 0.14 1.42 1.67 0.05 2.24 2.13 0.03 0.03
0.44
. . - .0 0. .0 .0 . 5 .0 5 .0 0. 0 0. 0 . . 0.0 0.
0.6600 0.4650 -0.12 0.03 1.42 1.46 0.05 2.24 2.13 0.03 0.03
0.46
.050 . - . 0.0 .5 .5 . 5 .0 55.0 0. 0 . 0 . .5 0.0 0 0.
0.7500 0.5625 -0.19 0.00 1.44 1.67 0.05 2.28 2.17 0.01 0.07
0.51
0. . -5. .5 .5 .5 . 5 .0 55.0 . 0 .00 . .5 0.0 0 0. 5
0.8125 0.5625 -0.23 0.14 1.44 1.67 0.05 2.28 2.17 0.05 0.04
0.54
0. . -5. 0. .5 .0 . 5 .0 55.0 . 0 . 0 . .5 0.0 0 0. 5
0.8125 0.5625 -0.23 0.03 1.44 1.46 0.05 2.28 2.17 0.05 0.04
0.55
0. 5. 5 -5. .5 .5 .5 . 5 .0 55.0 . 0 .00 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.14 1.44 1.67 0.05 2.28 2.17 0.05 0.04
0.57
0. 5. 5 -5. 0. .5 .0 . 5 .0 55.0 . 0 . 0 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.03 1.44 1.46 0.05 2.28 2.17 0.05 0.04
0.58
.050 5. 5 - . 0.0 .5 .5 . 5 .0 5 .0 0. 0 . 0 . .5 0.0 0 0.
0.7500 0.6250 -0.19 0.00 1.44 1.67 0.05 2.32 2.20 0.01 0.07
0.58
0. 5. 5 -5. .5 .5 .5 . 5 .0 5 .0 . 0 .00 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.14 1.44 1.67 0.05 2.32 2.20 0.05 0.04
0.61
0. 5. 5 -5. 0. .5 .0 . 5 .0 5 .0 . 0 . 0 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.03 1.44 1.46 0.05 2.32 2.20 0.05 0.04
0.62
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 50 .500 0. 00 0. 5 . 00 0 . 5 00 5 5 50X
1.2500 2.5000 0.8125 10500 2730 1640 12100
. 50 . 5. 00 500 0. . 0 00 0 . 00 5 0 5 0
1.2500 2.6150 1.0000 17400 4520 2120 21200
. 50 . 5. 00 500 0. . 0 00 0 . 00 5 0 5 0
1.2500 2.6150 1.0000 17400 4520 2120 21200
. 50 . 5. 00 500 0. . 0 00 0 . 00 5 0 5 0A
1.2500 2.6150 1.0000 17400 4520 2120 21200
. 50 . 5. 00 500 0. . 0 00 0 . 00 5 0A 5 0A
1.2500 2.6150 1.0000 17400 4520 2120 21200
. 50 . .000 5 00 0. . 5 00 0 00 . 0 0 00 0 0 0A
1.2500 2.6875 0.8268 13300 3440 2450 15800
. 50 . . 5 00 0. . 00 0 . 00 5 0
1.2500 2.6875 0.8750 14100 3650 2120 16500
. 50 . . 5 5 00 0. . 5 00 0 00 . 0 0 00 0 5 0 0
1.2500 2.6875 0.8750 13300 3440 2450 15800
. 50 . . 5 5 00 0. . 5 00 0 00 . 0 0 00 0 0 0
1.2500 2.6875 0.8750 13300 3440 2450 15800
. 50 . . 5 00 0. . 000 5 0 . 00 5 5
1.2500 2.6875 0.8750 13900 3600 1700 17500
. 50 . . 5 5 00 0.55 . 0 5500 00 .0 00 M 0 M 0 0
1.2500 2.6875 0.8750 13400 3470 3250 17400
. 50 . . 00 0. 5 . 00 00 . 000 0
1.2500 2.6875 1.0625 16800 4360 2620 20500
. 50 .0 . 5 50 00 0. .5 00 5 0 .5 00
1.2500 2.7170 0.7813 11400 2950 1930 13900
. 50 .0 . 5 50 00 0. .5 00 5 0 .5 00
1.2500 2.7170 0.7813 11400 2950 1930 13900
. 50 .0 . 5 50 00 0. .5 00 5 0 .5 00 5A
1.2500 2.7170 0.7813 11400 2950 1930 13900
. 50 .0 . 5 50 00 0. .5 00 5 0 .5 00 5A
1.2500 2.7170 0.7813 11400 2950 1930 13900
. 50 .0 . 5 50 00 0. .5 00 5 0 .5 00
1.2500 2.7170 0.8813 11400 2950 1930 13900
. 50 . 50 . 500 0. . 0 00 0 . 00 5 0 5
1.2500 2.7500 0.9375 17400 4520 2120 21200
. 50 . 50 . 500 0. . 0 00 0 . 00 5 5
1.2500 2.7500 0.9375 17400 4520 2120 21200
. 50 . 50 . 500 0. . 0 00 0 . 00 5 0 5 -S
1.2500 2.7500 0.9375 17400 4520 2120 21200
. 50 . .00 50 00 0. .5 00 5 0 .5 00
1.2500 2.8345 0.7481 11400 2950 1930 13900
. 50 .0 . 500 0. . 0 00 0 . 00 5 5 5
1.2500 2.8355 0.9375 17400 4520 2120 21200
. 50 . 5. 00 00 0.55 . 0 00 00 .0 00 HM HM 0
1.2500 2.8438 1.0000 16000 4140 3870 21200
. 50 . 5. 00 00 0.55 . 0 00 00 .0 00 HM HM AS
1.2500 2.8593 1.0000 16000 4140 3870 21200
. 50 . 0. 00 0. . 0 00 000 . 0 000 0
1.2500 2.8593 1.1875 19700 5110 2910 22800
. 50 . 0. 00 0. . 0 00 000 . 0 000 0
1.2500 2.8593 1.1875 19700 5110 2910 22800
. 50 . 0. 00 0. . 0 00 000 . 0 000 0
1.2500 2.8593 1.1875 19700 5110 2910 22800
. 50 .0 5 . 5 00 0. . 00 00 .5 00 5 0
1.2500 2.8750 0.8750 15200 3950 2490 18800
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
0. 5. 5 -5. 0. .5 .0 .5 5 .0 55.0 . 0 . 0 . .5 0.0 0 0.
0.8125 0.6250 -0.23 0.03 1.44 1.46 0.06 2.32 2.17 0.05 0.04
0.62
5. 5 0. - . 0. .5 .5 . .5 5 .0 0. 0 0. 0 . . 0.0 5 0. 0
0.9983 0.8125 -0.34 0.03 1.48 1.52 0.13 2.46 2.24 0.04 0.03
0.89
5. 5 0. - . 0. .5 .5 0. .5 0.0 0. 0 0. 0 . . 0.0 5 0.
0.9983 0.8125 -0.34 0.03 1.48 1.52 0.03 2.46 2.36 0.04 0.03
0.91
5. 5 0. - . 0. .5 .5 .5 .0 5 .0 0. 0 0. 0 . . 0.0 5 0.
0.9983 0.8125 -0.34 0.03 1.48 1.52 0.06 2.44 2.32 0.04 0.03
0.91
5. 5 0. - . . .5 .5 .5 .0 5 .0 0. 0 0. 0 . . 0.0 5 0.
0.9983 0.8125 -0.34 0.05 1.56 1.63 0.06 2.44 2.32 0.04 0.03
0.91
. 5 . -5. 0. .5 .0 .5 .0 5 .0 . 0 0. 0 .5 . 0.0 0.
0.8750 0.6393 -0.20 0.03 1.52 1.54 0.06 2.48 2.32 0.05 0.04
0.81
. . - . .5 .5 .0 .5 .0 0.0 .00 0. 0 . 0.5 0.0 5 0.
0.9375 0.6875 -0.26 0.14 1.48 1.73 0.06 2.48 2.36 0.04 0.01
0.83
. 5 . -5. .5 .5 .5 .5 .0 5 .0 . 0 0. 0 .5 . 0.0 0.
0.8750 0.6875 -0.20 0.14 1.52 1.75 0.06 2.48 2.32 0.05 0.04
0.82
. 5 . -5. 0. .5 .0 .5 .0 5 .0 . 0 0. 0 .5 . 0.0 0.
0.8750 0.6875 -0.20 0.03 1.52 1.54 0.06 2.48 2.32 0.05 0.04
0.83
. 5 . - . .5 .5 .5 0. .0 .0 0. 0 .50 . 0.0 50 0.
0.8750 0.6875 -0.29 0.06 1.48 1.56 0.03 2.48 2.40 0.03 0.06
0.85
. 5 . - . .5 0.5 .0 .5 5.0 5 .0 . 0 0. 0 . 0 0.0 0.
0.8750 0.6875 -0.11 0.06 1.59 1.69 0.06 2.56 2.28 0.07 0.04
0.87
. . 5 - . .5 .0 .0 .5 .0 5 .0 . 0 0. 0 . 0. 0.0 0.
1.0625 0.8750 -0.34 0.06 1.54 1.61 0.06 2.52 2.32 0.06 0.02
1.02
.5 5. 5 - . 0. .5 .0 . .0 5 .0 .00 . 0 . 0.0 0.
0.7710 0.6250 -0.17 0.03 1.52 1.54 0.13 2.48 2.32 0.04 0.06
0.76
.5 5. 5 - . 0. .5 .0 . .0 0.0 .00 . 0 . 0.0 0. 5
0.7710 0.6250 -0.17 0.03 1.52 1.54 0.05 2.48 2.36 0.04 0.06
0.78
.5 5. 5 - . .5 .5 .5 . .0 5 .0 .00 . 0 . 0.0 0.
0.7710 0.6250 -0.17 0.14 1.52 1.75 0.13 2.48 2.32 0.04 0.06
0.75
.5 5. 5 - . .5 .5 .5 . .0 0.0 .00 . 0 . 0.0 0. 5
0.7710 0.6250 -0.17 0.14 1.52 1.75 0.05 2.48 2.36 0.04 0.06
0.77
.5 . 5 - . 0. .5 .0 . .0 5 .0 .00 . 0 . 0.0 0.
0.7710 0.7250 -0.17 0.03 1.52 1.54 0.09 2.48 2.32 0.04 0.06
0.84
5. 5 .050 - . 0. .5 .5 . .0 .0 0. 0 0. 0 . . 0.0 5 0. 5
0.9983 0.7500 -0.34 0.03 1.48 1.52 0.05 2.52 2.40 0.04 0.03
1.00
5. 5 .050 - . .5 .5 .0 . .0 .0 0. 0 0. 0 . . 0.0 5 0. 5
0.9983 0.7500 -0.34 0.14 1.48 1.73 0.05 2.52 2.40 0.04 0.03
0.98
5. 5 .050 - . 0. .5 .5 .5 .0 .0 0. 0 0. 0 . . 0.0 5 0. 5
0.9983 0.7500 -0.34 0.03 1.48 1.52 0.06 2.52 2.40 0.04 0.03
0.99
.5 5.0 - . 0. .5 .0 .5 5.0 .0 .00 . 0 . 0.0 0.
0.7710 0.5918 -0.17 0.03 1.52 1.54 0.06 2.56 2.44 0.04 0.06
0.84
5. 5 .050 - . .5 .5 .0 0. 5.0 .0 0. 0 0. 0 . . 0.0 5 0.
0.9983 0.7500 -0.34 0.14 1.48 1.73 0.03 2.56 2.48 0.04 0.03
1.07
5. 00 . - . .5 .5 .5 . .0 0.0 . 0 . 0 . 0. 0.0 0.5
1.0000 0.7812 -0.18 0.06 1.67 1.75 0.09 2.72 2.36 0.07 0.07
1.15
5. 00 . - . .5 .5 .5 . .0 5 .0 . 0 . 0 . 0. 0.0 0.5
1.0000 0.7812 -0.18 0.06 1.67 1.75 0.13 2.72 2.32 0.07 0.07
1.16
. . - 0. 0. .5 0.0 . .0 .0 .50 0.50 . . 0.0 0.5
1.1810 0.9375 -0.40 0.03 1.56 1.57 0.13 2.64 2.40 0.06 0.02
1.29
. . - 0. .5 .5 5.5 . .0 .0 .50 0.50 . . 0.0 0.5
1.1810 0.9375 -0.40 0.14 1.56 1.79 0.13 2.64 2.40 0.06 0.02
1.28
. . - 0. . .5 .0 . .0 .0 * * . . 0.0 0.5
1.1810 0.9375 -0.40 0.09 1.56 1.69 0.13 2.64 2.40 * *
1.28
. . -5. .5 .5 5.0 . .0 .0 0. 0 0. 0 . . 0.0 0.
0.9375 0.6875 -0.22 0.14 1.52 1.77 0.13 2.68 2.48 0.04 0.01
1.01
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 50 .0 5 . 5 00 0. . 00 00 .5 00
0
0 5 0 0
0 0 0
5 0
HM 5 HM 5 0
0
5 00
HM 0 HM 0
5
0
A
0
0 X 0
HM HM
X
5 5
5 5 5 0
0 0
M 5 5 M 5 0
5 5
M 0 A M 0 0
M 0 M 0 0
M 0 M 0
M 0 -S M 0 0
0
1.2500 2.8750 0.8750 15200 3950 2490 18800
. 50 .0 5 . 5 0 00 0. 5 . 5 00 00 . 00
B
Caption:
1.2500 2.8750 0.8750 13700 3550 2750 16800
. 50 .0 5 . 5 0 00 0. 5 . 5 00 00 . 00
1.2500 2.8750 0.8750 13700 3550 2750 16800
. 50 .0 5 . 00 0. . 500 00 .5 0 000
1.2500 2.8750 1.0625 18600 4830 3050 22900
. 50 .0 5 . 0 0 00 0.55 . 0 0 00 500 .0 000
1.2500 2.8750 1.1563 18100 4700 4390 24900
. 50 . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000
Caption:
1.2500 3.0000 0.9375 18100 4690 2430 23000
. 50 . 00 . 0 00 0. 0. 0 00 00 0. 00
1.2500 3.0000 0.9688 16200 4190 4790 17100
. 50 . 00 . 0 00 0.55 . 0 00 0 00 .0 000
1.2500 3.0000 1.1563 19400 5030 4700 26700
. 50 . 00 0. 00 0. . 0 00 000 . 0 000
T
C
1.2500 3.0000 1.1875 19700 5110 2910 22800
. 50 . 00 0. 00 0. . 0 00 000 . 0 000
1.2500 3.0000 1.1875 19700 5110 2910 22800
. 50 . 5 5. 00 00 0. 0. 0 00 00 0. 00
D
1.2500 3.1250 1.0000 16200 4190 4790 17100
. 50 . 5 . 0 00 0. . 5 00 5 00 . 0 000
B
d
1.2500 3.1250 1.1563 21800 5650 3530 26800
. 50 0.000 . 00 0. . 0 00 0 . 00
1.2500 3.1496 0.9518 16600 4290 2010 18700
. 50 0. . 00 0. . 0 00 0 . 00
a
1.2500 3.1562 1.0625 16600 4290 2010 18700
. . 0.500 5 00 0. . 5 00 0 00 . 0 0 00
1.2593 2.6373 0.8071 13300 3440 2450 15800
. . .000 00 0.55 . 0 00 00 .0 00
1.2593 2.8336 1.0630 16000 4140 3870 21200
.000 .000 .000 5 00 0. . 00 00 . 0 00
1.2598 2.8346 0.7480 12200 3170 1960 13500
.00 .000 .000 5 00 0. . 00 00 . 0 00
1.2600 2.8346 0.7480 12200 3170 1960 13500
.5 . 50 5. 00 500 0. . 0 00 0 . 00
1.2808 2.7500 1.0000 17400 4520 2120 21200
. . 5. 00 500 0. . 0 00 0 . 00
1.3125 2.6150 1.0000 17400 4520 2120 21200
. . 5 0. 00 0. . 00 0 0 .5 5 00
1.3125 2.6250 0.8125 10900 2830 1800 13000
. . 5 0. 5 00 0. 5 . 0 5000 050 . 00
1.3125 2.6250 0.8125 13000 3370 2030 16400
. . . 5 00 0. . 000 5 0 . 00
1.3125 2.6875 0.8750 13900 3600 1700 17500
. . . 5 5 00 0.55 . 0 5500 00 .0 00
1.3125 2.6875 0.8750 13400 3470 3250 17400
. . . 5 5 00 0.55 . 0 5500 00 .0 00
1.3125 2.6875 0.8750 13400 3470 3250 17400
. . . 5 5 00 0.55 . 0 5500 00 .0 00
1.3125 2.6875 0.8750 13400 3470 3250 17400
. . . 5 5 00 0.55 . 0 5500 00 .0 00
1.3125 2.6875 0.8750 13400 3470 3250 17400
. .0 . 5 50 00 0. .5 00 5 0 .5 00
1.3125 2.7170 0.7813 11400 2950 1930 13900
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. . -5. 0. .5 .5 . .0 .0 0. 0 0. 0 . . 0.0 0.
0.9375 0.6875 -0.22 0.03 1.52 1.56 0.13 2.68 2.48 0.04 0.01
1.02
. 5 . - . .5 .5 5.5 . .0 .0 . 0 0. 0 0. 0. 0.0 0 0.
0.8750 0.6875 -0.15 0.14 1.56 1.79 0.13 2.68 2.44 0.06 0.04
0.97
. 5 . - . 0. .5 0.0 . .0 .0 . 0 0. 0 0. 0. 0.0 0 0. 5
0.8750 0.6875 -0.15 0.03 1.56 1.57 0.13 2.68 2.44 0.06 0.04
0.99
. 5 . 5 - . .5 0.0 .0 .5 .0 .0 . 0 0. 0 . 0. 0.0 0.55
1.0620 0.8750 -0.32 0.14 1.57 1.81 0.06 2.68 2.48 0.07 0.03
1.22
. .0 0 -5. . .5 5.5 . 0.0 5 .0 . 0 . 0 . . 0.0 5 0.
1.0938 0.9063 -0.22 0.05 1.68 1.79 0.13 2.76 2.32 0.08 0.07
1.34
5. 5 .050 - . .5 .5 .0 . 0.0 .0 . 0 0. 0 . . 0.0 5 0.5
1.0100 0.7500 -0.32 0.06 1.52 1.61 0.13 2.76 2.60 0.06 0.04
1.25
.0 . 0 - .0 .5 .5 .0 . .0 .0 . 0 . 0 . .5 0.0 0.5
0.9478 0.6563 -0.08 0.06 1.63 1.73 0.13 2.87 2.52 0.13 0.09
1.12
.5 5 .0 0 -5. 0. .5 5.5 . .0 .0 .00 . 0 . . 0.0 0.
1.1250 0.9063 -0.22 0.03 1.75 1.79 0.13 2.87 2.44 0.08 0.05
1.50
. . - 0. 0. .5 0.0 0. .0 5.0 .50 0.50 . . 0.0 0.
1.1810 0.9375 -0.40 0.03 1.56 1.57 0.03 2.72 2.56 0.06 0.02
1.48
. . - 0. .5 .5 5.5 0. .0 5.0 .50 0.50 . . 0.0 0.
1.1810 0.9375 -0.40 0.14 1.56 1.79 0.03 2.72 2.56 0.06 0.02
1.47
.0 . - .0 .5 .5 .0 .5 .0 .0 . 0 . 0 . .5 0.0 0.5
0.9478 0.6875 -0.08 0.06 1.63 1.73 0.06 2.91 2.64 0.13 0.09
1.28
. . - . . .0 .0 . .0 .0 . 0 0. 0 . . 0.0 0.
1.1721 0.9375 -0.34 0.05 1.61 1.69 0.13 2.91 2.64 0.06 0.04
1.64
. 0 .000 - . 0. .5 0.0 . 5.0 .0 0. 0 . 0 .5 0.0 0.5
0.8820 0.8268 -0.25 0.03 1.56 1.57 0.09 2.95 2.80 0.03 0.04
1.30
. 0 . - . 0. .5 0.0 . 5.0 0.0 0. 0 . 0 .5 0.0 0.
0.8820 0.9375 -0.25 0.03 1.56 1.57 0.13 2.95 2.76 0.03 0.04
1.38
0.500 .000 -5. 0. .5 .5 .5 .0 5 .0 . 0 . 0 .5 . 0.0 0.
0.8071 0.6299 -0.20 0.03 1.52 1.56 0.06 2.44 2.32 0.05 0.10
0.73
5. 00 . - . . .5 .5 .5 .0 .0 . 0 . 0 . 0. 0.0 0.55
1.0000 0.8442 -0.18 0.13 1.67 1.91 0.06 2.68 2.40 0.07 0.07
1.21
. 5. 5 - . .0 .5 0.5 .5 5.0 .0 0. 0 . 0 . 0. 0.0 0 0.
0.7450 0.6250 -0.16 0.08 1.48 1.59 0.06 2.56 2.44 0.02 0.04
0.81
. 5. 5 - . .5 .5 .5 .5 5.0 .0 0. 0 . 0 . 0. 0.0 0 0.
0.7450 0.6250 -0.16 0.06 1.48 1.56 0.06 2.56 2.44 0.02 0.04
0.81
. .050 - 0. 5.0 .0 .5 . .0 .0 .50 0. 0 . . 0.0 5 0.
1.0608 0.7500 -0.40 0.20 1.50 1.87 0.05 2.52 2.40 0.10 0.03
0.98
5. 5 0. - . .5 .0 5.0 . .5 5 .0 0. 0 0. 0 . . 0.0 5 0.
0.9983 0.8125 -0.34 0.14 1.54 1.77 0.13 2.46 2.24 0.04 0.03
0.84
0. 5. 5 -5. .5 .5 .5 .5 .0 5 .0 * * . . 0.0 0.
0.8125 0.6250 -0.21 0.14 1.52 1.75 0.06 2.40 2.28 * *
0.68
0. . 0 -5. .5 .0 5.0 . .0 5 .0 0. 0 . 0 0. . 0.0 0 0.
0.8125 0.6563 -0.22 0.14 1.54 1.77 0.09 2.44 2.28 0.02 0.09
0.71
. 5 . - . .5 .5 .0 0. .0 .0 0. 0 .50 . 0.0 50 0.
0.8750 0.6875 -0.29 0.06 1.52 1.61 0.03 2.48 2.40 0.03 0.06
0.82
. 5 . - . . .0 .5 .5 5.0 5 .0 . 0 .00 . 0 0.0 0.
0.8750 0.6875 -0.11 0.05 1.62 1.71 0.06 2.56 2.28 0.06 0.04
0.84
. 5 . - . 0. .0 .5 .5 5.0 5 .0 . 0 .00 . 0 0.0 0.
0.8750 0.6875 -0.11 0.03 1.62 1.67 0.06 2.56 2.28 0.06 0.04
0.84
. 5 . - . 0. .0 .5 0. .0 5 .0 . 0 .00 . 0 0.0 0.
0.8750 0.6875 -0.11 0.03 1.62 1.67 0.03 2.52 2.32 0.06 0.04
0.84
. 5 . - . .0 .0 .5 .5 5.0 5 .0 . 0 .00 . 0 0.0 0.
0.8750 0.6875 -0.11 0.16 1.62 1.95 0.06 2.56 2.28 0.06 0.04
0.83
.5 5. 5 - . .5 .5 .0 . .0 5 .0 .00 . 0 . 0.0 0.
0.7710 0.6250 -0.17 0.14 1.56 1.81 0.13 2.48 2.32 0.04 0.06
0.73
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. .0 . 5 50 00 0. .5 00 5 0 .5 00
0
5 5
5 5 5
5 5 -S
5 5 5 -S
0
-S
0
0
0 5X
HM 5 HM 5 0
HM 5 HM 5
HM 5 HM 5
M 0 M 0
5 0
5
0 0
0
5 0 5 0
HM HM 0
HM HM
HM HM 0
1.3125 2.7170 0.7813 11400 2950 1930 13900
. .0 . 5 50 00 0. .5 00 5 0 .5 00
B
Caption:
1.3125 2.7170 0.7813 11400 2950 1930 13900
. .0 . 5 50 00 0. .5 00 5 0 .5 00
1.3125 2.7170 0.7813 11400 2950 1930 13900
. . .050 5 00 0. . 00 00 . 0 00
1.3125 2.7450 0.7500 12200 3170 1960 13500
. . 50 . 500 0. . 0 00 0 . 00
1.3125 2.7500 0.9375 17400 4520 2120 21200
. . 50 . 500 0. . 0 00 0 . 00
Caption:
1.3125 2.7500 0.9375 17400 4520 2120 21200
. . 50 . 500 0. . 0 00 0 . 00
1.3125 2.7500 0.9375 17400 4520 2120 21200
. . 50 . 500 0. . 0 00 0 . 00
1.3125 2.7500 0.9375 17400 4520 2120 21200
. . .00 50 00 0. .5 00 5 0 .5 00
T
C
1.3125 2.8345 0.7481 11400 2950 1930 13900
. .000 .000 5 00 0. . 00 00 . 0 00
1.3125 2.8346 0.7480 12200 3170 1960 13500
. .000 .000 5 00 0. . 00 00 . 0 00
D
1.3125 2.8346 0.7480 12200 3170 1960 13500
. . 0. 5 00 0. 0 . 00 50 . 5 5 00
B
d
1.3125 2.8440 0.8125 11800 3060 2100 14800
. . 0. 00 0. . 0 00 000 . 0 000
1.3125 2.8593 1.1875 19700 5110 2910 22800
. . 0. 00 0. . 0 00 000 . 0 000
a
1.3125 2.8593 1.1875 19700 5110 2910 22800
. .0 5 . 0 00 0. 0 . 0 00 0 00 . 0 000
1.3125 2.8750 0.9375 18100 4690 2430 23000
. .0 5 . 0 0 00 0.55 . 0 0 00 500 .0 000
1.3125 2.8750 1.1563 18100 4700 4390 24900
. .0 5 . 0 0 00 0.55 . 0 0 00 500 .0 000
1.3125 2.8750 1.1563 18100 4700 4390 24900
. . . 0 0 00 0.55 . 0 0 00 500 .0 000
1.3125 2.9060 1.1563 18100 4700 4390 24900
. . 00 . 5 5 00 0.55 . 0 5500 00 .0 00
1.3125 3.0000 0.8750 13400 3470 3250 17400
. . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000
1.3125 3.0000 0.9375 18100 4690 2430 23000
. . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000
1.3125 3.0000 0.9375 18100 4690 2430 23000
. . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000
1.3125 3.0000 0.9375 18100 4690 2430 23000
. . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000
1.3125 3.0000 0.9375 18100 4690 2430 23000
. . 00 . 0 00 0. 0 . 00 5 00 . 5 0 000
1.3125 3.0000 1.1563 19700 5110 3520 24100
. . 00 . 0 00 0.55 . 0 00 0 00 .0 000
1.3125 3.0000 1.1563 19400 5030 4700 26700
. . 00 . 0 00 0.55 . 0 00 0 00 .0 000
1.3125 3.0000 1.1563 19400 5030 4700 26700
. . 00 . 0 00 0.55 . 0 00 0 00 .0 000
1.3125 3.0000 1.1563 19400 5030 4700 26700
. . 5 5. 00 00 0. 0. 0 00 00 0. 00
1.3125 3.1250 1.0000 16200 4190 4790 17100
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B 0 TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.5 5. 5 - . .5 .5 .0 . .0 0.0 .00 . 0 . 0.0 0.
0.7710 0.6250 -0.17 0.14 1.56 1.81 0.05 2.48 2.36 0.04 0.06
0.74
.5 5. 5 - . 0. .5 0.5 . .0 5 .0 .00 . 0 . 0.0 0.
0.7710 0.6250 -0.17 0.03 1.56 1.59 0.13 2.48 2.32 0.04 0.06
0.73
.5 5. 5 - . 0. .5 0.5 . .0 0.0 .00 . 0 . 0.0 0.
0.7710 0.6250 -0.17 0.03 1.56 1.59 0.05 2.48 2.36 0.04 0.06
0.75
. .050 - . .5 .5 0.5 .5 5.0 .0 0. 0 . 0 . 0. 0.0 0 0.
0.7450 0.7500 -0.16 0.06 1.52 1.59 0.06 2.56 2.40 0.02 0.04
0.76
5. 5 .050 - . 0. .0 .5 . .0 .0 0. 0 0. 0 . . 0.0 5 0.
0.9983 0.7500 -0.34 0.03 1.54 1.56 0.05 2.52 2.40 0.04 0.03
0.96
5. 5 .050 - . .5 .0 5.0 . .0 .0 0. 0 0. 0 . . 0.0 5 0.
0.9983 0.7500 -0.34 0.14 1.54 1.77 0.05 2.52 2.40 0.04 0.03
0.95
5. 5 .050 - . 0. .0 .5 .5 .0 .0 0. 0 0. 0 . . 0.0 5 0.
0.9983 0.7500 -0.34 0.03 1.54 1.56 0.06 2.52 2.40 0.04 0.03
0.96
5. 5 .050 - . .5 .0 5.0 .5 .0 .0 0. 0 0. 0 . . 0.0 5 0.
0.9983 0.7500 -0.34 0.14 1.54 1.77 0.06 2.52 2.40 0.04 0.03
0.95
.5 5.0 - . .5 .5 .0 .5 5.0 .0 .00 . 0 . 0.0 0.
0.7710 0.5918 -0.17 0.14 1.56 1.81 0.06 2.56 2.44 0.04 0.06
0.81
. 5. 5 - . .5 .5 .5 .5 5.0 .0 0. 0 . 0 . 0. 0.0 0 0. 5
0.7450 0.6250 -0.16 0.14 1.52 1.75 0.06 2.56 2.44 0.02 0.04
0.78
. 5. 5 - . .5 .5 .5 .0 5.0 .0 0. 0 . 0 . 0. 0.0 0 0. 5
0.7450 0.6250 -0.16 0.14 1.52 1.75 0.08 2.56 2.44 0.02 0.04
0.78
0. 5. 5 - . .5 .5 .0 . .0 .0 . 0 . 0 0. 0. 0.0 0 0. 0
0.8125 0.6250 -0.16 0.14 1.56 1.81 0.05 2.64 2.48 0.05 0.04
0.87
. . - 0. .5 0.5 .0 . .0 .0 .50 0.50 . . 0.0 0.5
1.1810 0.9375 -0.40 0.14 1.59 1.85 0.13 2.64 2.40 0.06 0.02
1.23
. . - 0. 0. 0.5 .5 . .0 .0 * * . . 0.0 0.5
1.1810 0.9375 -0.40 0.03 1.59 1.63 0.13 2.64 2.40 * *
1.25
5. 5 .050 - . .5 0.0 .0 0. .0 .0 . 0 0. 0 . . 0.0 5 0.5
1.0100 0.7500 -0.32 0.06 1.57 1.65 0.03 2.72 2.60 0.06 0.04
1.11
. .0 0 -5. 0. .5 5.5 . 0.0 5 .0 . 0 . 0 . . 0.0 5 0.5
1.0938 0.9063 -0.22 0.03 1.68 1.79 0.13 2.76 2.32 0.08 0.07
1.30
. .0 0 -5. 0. .5 5.5 0. 0.0 .0 . 0 . 0 . . 0.0 5 0. 0
1.0938 0.9063 -0.22 0.03 1.68 1.79 0.03 2.76 2.44 0.08 0.07
1.32
. .0 0 -5. 0. .5 5.5 . 0.0 0.0 . 0 . 0 . . 0.0 5 0.
1.0938 0.9063 -0.22 0.03 1.68 1.79 0.13 2.76 2.36 0.08 0.07
1.34
. 5 . - . 0. .0 .5 0. .0 .0 . 0 .00 . 0 0.0 0.50
0.8750 0.6875 -0.11 0.03 1.62 1.67 0.03 2.68 2.44 0.06 0.04
1.11
5. 5 .050 - . .5 0.0 .0 . 0.0 .0 . 0 0. 0 . . 0.0 5 0.55
1.0100 0.7500 -0.32 0.14 1.57 1.81 0.13 2.76 2.60 0.06 0.04
1.21
5. 5 .050 - . .5 0.0 .0 0. 0.0 .0 . 0 0. 0 . . 0.0 5 0.5
1.0100 0.7500 -0.32 0.14 1.57 1.81 0.03 2.76 2.68 0.06 0.04
1.23
5. 5 .050 - . .5 0.0 .0 . 0.0 .0 . 0 0. 0 . . 0.0 5 0.55
1.0100 0.7500 -0.32 0.06 1.57 1.65 0.13 2.76 2.60 0.06 0.04
1.22
5. 5 .050 - . .5 0.0 .0 0. 0.0 .0 . 0 0. 0 . . 0.0 5 0.5
1.0100 0.7500 -0.32 0.06 1.57 1.65 0.03 2.76 2.68 0.06 0.04
1.24
.5 5 . - . 0. .5 .0 . .0 .0 . 0 . 0 . .0 0.0 0.
1.1250 0.9375 -0.30 0.03 1.67 1.69 0.13 2.83 2.52 0.06 0.05
1.41
.5 5 .0 0 -5. 0. .5 .5 . .0 .0 .00 . 0 . . 0.0 0.
1.1250 0.9063 -0.22 0.03 1.75 1.83 0.13 2.87 2.44 0.08 0.05
1.46
.5 5 .0 0 -5. 0. .5 .5 0. .0 5.0 .00 . 0 . . 0.0 0.
1.1250 0.9063 -0.22 0.03 1.75 1.83 0.03 2.87 2.56 0.08 0.05
1.48
.5 5 .0 0 -5. . .5 5 .0 . .0 .0 .00 . 0 . . 0.0 0.
1.1250 0.9063 -0.22 0.15 1.75 2.09 0.13 2.87 2.44 0.08 0.05
1.45
.0 . - .0 .5 .0 5 .0 .5 .0 .0 . 0 . 0 . .5 0.0 0.5
0.9478 0.6875 -0.08 0.14 1.65 2.01 0.06 2.91 2.64 0.13 0.09
1.24
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. . 5 5. 00 00 0. 0. 0 00 00 0. 00
1.3125 3.1250 1.0000 16200 4190 4790 17100
. . 5 . 0 00 0. . 5 00 5 00 . 0 000 0
1.3125 3.1250 1.1563 21800 5650 3530 26800
. . 5 . 0 00 0. . 5 00 5 00 . 0 000 0
1.3125 3.1250 1.1563 21800 5650 3530 26800
. 0.000 .000 00 0. . 0 00 0 . 00 5-S
1.3125 3.1496 0.8268 16600 4290 2010 18700
. 0. . 00 0. . 0 00 0 . 00 5-S 0
1.3125 3.1562 1.0625 16600 4290 2010 18700
. .500 5. 00 00 0. 0. 0 00 000 0. 5 00
1.3125 3.4843 1.0000 17500 4540 6070 19900
. 5 5.0 .0 50500 0. .5 00 0 .55 00 LM 5 A LM 5 0
1.3750 2.5625 0.7100 11300 2940 1890 14200
. 5 5.0 .0 50500 0. .5 00 0 .55 00 LM 5 LM 5 0
1.3750 2.5625 0.7100 11300 2940 1890 14200
. 5 5.0 .0 50500 0. .5 00 0 .55 00 LM 5 LM 5 0
1.3750 2.5625 0.7100 11300 2940 1890 14200
. 5 5.0 .0 50500 0. .5 00 0 .55 00 LM 5 X LM 5 0
1.3750 2.5625 0.7100 11300 2940 1890 14200
. 5 5.0 .0 50500 0. .5 00 0 .55 00 LM 5 A LM 5 A
1.3750 2.5625 0.8300 11300 2940 1890 14200
. 5 5.0 .0 50500 0. .5 00 0 .55 00 LM 5 LM 5 A
1.3750 2.5625 0.8300 11300 2940 1890 14200
. 5 5. 0. 5 00 0. 5 . 0 5000 050 . 00 M 5 M 5
1.3750 2.5979 0.8125 13000 3370 2030 16400
. 5 . 5 0. 5 00 0. 5 . 0 5000 050 . 00 M 5 M 5 0
1.3750 2.6250 0.8125 13000 3370 2030 16400
. 5 . .0 50500 0. .5 00 0 .55 00 LM 5 LM 5
1.3750 2.6875 0.7100 11300 2940 1890 14200
. 5 . 0. 5 00 0. 5 . 0 00 5 0 . 00 5 5 5 5
1.3750 2.6875 0.8125 12300 3200 1930 15300
. 5 . 0. 5 00 0. 5 . 0 5000 050 . 00 M 5 M 5
1.3750 2.6875 0.8125 13000 3370 2030 16400
. 5 .0 . 5 50 00 0. .5 00 5 0 .5 00 A
1.3750 2.7170 0.7813 11400 2950 1930 13900
. 5 .0 . 5 50 00 0. .5 00 5 0 .5 00 A
1.3750 2.7170 0.7813 11400 2950 1930 13900
. 5 .0 . 5 50 00 0. .5 00 5 0 .5 00 A
1.3750 2.7170 0.7813 11400 2950 1930 13900
. 5 .0 . 5 50 00 0. .5 00 5 0 .5 00 A
1.3750 2.7170 0.7813 11400 2950 1930 13900
. 5 .0 . 5 50 00 0. .5 00 5 0 .5 00 A
1.3750 2.7170 0.8813 11400 2950 1930 13900
. 5 . 50 . 5 50 00 0. .5 00 5 0 .5 00 A 5A
1.3750 2.7500 0.7813 11400 2950 1930 13900
. 5 . .000 00 0.55 . 0 00 00 .0 00 HM HM
1.3750 2.8336 1.0630 16000 4140 3870 21200
. 5 . 5. 00 00 0.55 . 0 00 00 .0 00 HM A HM 0
1.3750 2.8438 1.0000 16000 4140 3870 21200
. 5 . 5. 00 00 0.55 . 0 00 00 .0 00 HM HM 0
1.3750 2.8438 1.0000 16000 4140 3870 21200
. 5 . 0. 5 00 0. 0 . 00 50 . 5 5 00
1.3750 2.8440 0.8125 11800 3060 2100 14800
. 5 . 5. 00 00 0.55 . 0 00 00 .0 00 HM HM AS
1.3750 2.8593 1.0000 16000 4140 3870 21200
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.0 . - .0 .0 .0 .0 .5 .0 .0 . 0 . 0 . .5 0.0 0.5
0.9478 0.6875 -0.08 0.08 1.65 1.89 0.06 2.91 2.64 0.13 0.09
1.25
. . - . .5 .5 .0 . .0 .0 . 0 0. 0 . . 0.0 0.
1.1721 0.9375 -0.34 0.14 1.67 1.93 0.13 2.91 2.64 0.06 0.04
1.58
. . - . 0. .5 .0 . .0 .0 . 0 0. 0 . . 0.0 0.
1.1721 0.9375 -0.34 0.03 1.67 1.69 0.13 2.91 2.64 0.06 0.04
1.60
. 0 . - . 0. 0.5 .0 . 5.0 .0 0. 0 . 0 .5 0.0 0.5
0.8820 0.7018 -0.25 0.03 1.59 1.61 0.05 2.95 2.87 0.03 0.04
1.20
. 0 . - . 0. 0.5 .0 . 5.0 0.0 0. 0 . 0 .5 0.0 0.
0.8820 0.9375 -0.25 0.03 1.59 1.61 0.13 2.95 2.76 0.03 0.04
1.35
. . . .0 .0 5 .0 .5 .0 5.0 . 0 . 0 . . 0.0 0.
0.9330 0.6875 0.09 0.08 1.89 2.01 0.06 3.31 2.95 0.15 0.10
1.67
. . 0 - . 0. .0 0.5 . .0 5 .0 0. 0 . 0 0. 0.0 0. 5
0.7200 0.5500 -0.14 0.03 1.66 1.59 0.05 2.40 2.28 0.03 0.05
0.56
. . 0 - . .5 .5 .0 . .0 5 .0 0. 0 . 0 0. 0.0 0.
0.7200 0.5500 -0.14 0.14 1.63 1.89 0.05 2.40 2.28 0.03 0.05
0.54
. . 0 - . .5 0.0 .0 . .0 5 .0 0. 0 . 0 0. 0.0 0. 5
0.7200 0.5500 -0.14 0.06 1.57 1.65 0.05 2.40 2.28 0.03 0.04
0.56
. . 0 - . . 0.0 .5 . .0 5 .0 0. 0 . 0 0. 0.0 0. 5
0.7200 0.5500 -0.14 0.09 1.57 1.71 0.05 2.40 2.28 0.03 0.04
0.55
. .0 - . 0. .0 0.5 .5 .0 5 .0 0. 0 . 0 0. 0.0 0.
0.7200 0.6700 -0.14 0.03 1.66 1.59 0.06 2.40 2.28 0.03 0.05
0.61
. .0 - . .5 .5 .0 .5 .0 5 .0 0. 0 . 0 0. 0.0 0.
0.7200 0.6700 -0.14 0.14 1.63 1.89 0.06 2.40 2.28 0.03 0.05
0.59
0. . 0 -5. .5 0.0 .5 . .0 5 .0 0. 0 . 0 0. . 0.0 0 0. 0
0.8125 0.6563 -0.22 0.14 1.57 1.83 0.09 2.44 2.28 0.02 0.09
0.66
0. . 0 -5. .5 0.0 .5 . .0 5 .0 0. 0 . 0 0. . 0.0 0 0.
0.8125 0.6563 -0.22 0.14 1.57 1.83 0.09 2.44 2.28 0.02 0.09
0.68
. . 0 - . .5 .5 .0 . .0 5 .0 0. 0 . 0 0. 0.0 0.
0.7200 0.5500 -0.14 0.14 1.63 1.89 0.05 2.48 2.32 0.03 0.05
0.62
0. 5. 5 -5. .5 0.0 .0 . .0 5 .0 0. 0 . 0 .5 . 0.0 0 0.
0.8125 0.6250 -0.23 0.14 1.57 1.81 0.09 2.48 2.32 0.03 0.08
0.71
0. . 0 -5. .5 0.0 .5 . .0 5 .0 0. 0 . 0 0. . 0.0 0 0.
0.8125 0.6563 -0.22 0.14 1.57 1.83 0.09 2.48 2.32 0.02 0.09
0.73
.5 5. 5 - . .5 .0 .0 . .0 5 .0 .00 . 0 . 0.0 0.
0.7710 0.6250 -0.17 0.06 1.61 1.69 0.13 2.48 2.32 0.04 0.06
0.70
.5 5. 5 - . .5 .0 .0 . .0 0.0 .00 . 0 . 0.0 0.
0.7710 0.6250 -0.17 0.06 1.61 1.69 0.05 2.48 2.36 0.04 0.06
0.72
.5 5. 5 - . .5 .0 .0 . .0 5 .0 .00 . 0 . 0.0 0.
0.7710 0.6250 -0.17 0.14 1.61 1.85 0.13 2.48 2.32 0.04 0.06
0.70
.5 5. 5 - . .5 .0 .0 . .0 0.0 .00 . 0 . 0.0 0.
0.7710 0.6250 -0.17 0.14 1.61 1.85 0.05 2.48 2.36 0.04 0.06
0.71
.5 . 5 - . .5 .0 .0 . .0 5 .0 .00 . 0 . 0.0 0. 5
0.7710 0.7250 -0.17 0.14 1.61 1.85 0.09 2.48 2.32 0.04 0.06
0.77
.5 5. 5 - . .5 .0 .0 .5 .0 0.0 .00 . 0 . 0.0 0.
0.7710 0.6250 -0.17 0.06 1.61 1.69 0.06 2.52 2.36 0.04 0.06
0.74
5. 00 . - . . .5 .5 .5 .0 .0 . 0 . 0 . 0. 0.0 0.5
1.0000 0.8442 -0.18 0.09 1.68 1.91 0.06 2.68 2.40 0.07 0.07
1.14
5. 00 . - . .5 .0 5 .0 . .0 0.0 . 0 . 0 . 0. 0.0 0.
1.0000 0.7812 -0.18 0.14 1.69 2.01 0.09 2.72 2.36 0.07 0.07
1.07
5. 00 . - . . .5 .5 . .0 0.0 . 0 . 0 . 0. 0.0 0.
1.0000 0.7812 -0.18 0.09 1.68 1.91 0.09 2.72 2.36 0.07 0.07
1.08
0. 5. 5 - . .5 0.5 .0 . .0 .0 . 0 . 0 0. 0. 0.0 0 0.
0.8125 0.6250 -0.16 0.14 1.59 1.85 0.05 2.64 2.48 0.05 0.04
0.84
5. 00 . - . . .5 .5 . .0 5 .0 . 0 . 0 . 0. 0.0 0.
1.0000 0.7812 -0.18 0.09 1.68 1.91 0.13 2.72 2.32 0.07 0.07
1.08
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 5 .0 5 . 5 00 0. . 00 00 .5 00
0
0
0 0 0
0 0 0
0 0 0
5 5 0
5 5
5 5 0
5 5
5 A 5
5X
5X
0 0
0
0
5 5 0
5 5
5 5 0
00
HM A HM 0
HM HM 0
0
0
1.3750 2.8750 0.8750 15200 3950 2490 18800
. 5 .0 5 . 5 00 0. . 00 00 .5 00
B
Caption:
1.3750 2.8750 0.8750 15200 3950 2490 18800
. 5 .0 5 . 5 00 0. . 00 00 .5 00
1.3750 2.8750 0.8750 15200 3950 2490 18800
. 5 .0 5 . 5 0 00 0. 5 . 5 00 00 . 00
1.3750 2.8750 0.8750 13700 3550 2750 16800
. 5 .0 5 . 5 0 00 0. 5 . 5 00 00 . 00
1.3750 2.8750 0.8750 13700 3550 2750 16800
. 5 .0 5 . 5 0 00 0. 5 . 5 00 00 . 00
Caption:
1.3750 2.8750 0.8750 13700 3550 2750 16800
. 5 .0 5 . 00 0. .0 0 00 0 00 .0 00
1.3750 2.8750 0.9375 17700 4590 2280 21900
. 5 .0 5 . 00 0. .0 0 00 0 00 .0 00
1.3750 2.8750 0.9375 17700 4590 2280 21900
. 5 .0 5 . 00 0. .0 0 00 0 00 .0 00
T
C
1.3750 2.8750 0.9375 17700 4590 2280 21900
. 5 .0 5 . 00 0. .0 0 00 0 00 .0 00
1.3750 2.8750 0.9375 17700 4590 2280 21900
. 5 .0 5 . 00 0. .0 0 00 0 00 .0 00
D
1.3750 2.8750 0.9375 17700 4590 2280 21900
. 5 .0 5 . 0 00 0. 0 . 0 00 0 00 . 0 000
B
d
1.3750 2.8750 0.9375 18100 4690 2430 23000
. 5 .0 5 . 0 00 0. 0 . 0 00 0 00 . 0 000
1.3750 2.8750 0.9375 18100 4690 2430 23000
. 5 .0 5 . 00 0. . 500 00 .5 0 000
a
1.3750 2.8750 1.0625 18600 4830 3050 22900
. 5 . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000
1.3750 3.0000 0.9375 18100 4690 2430 23000
. 5 . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000
1.3750 3.0000 0.9375 18100 4690 2430 23000
. 5 . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000
1.3750 3.0000 0.9375 18100 4690 2430 23000
. 5 . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000
1.3750 3.0000 0.9375 18100 4690 2430 23000
. 5 . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000
1.3750 3.0000 0.9375 18100 4690 2430 23000
. 5 . 00 . 0 00 0. 0 . 00 5 00 . 5 0 000
1.3750 3.0000 1.1563 19700 5110 3520 24100
. 5 . 00 . 0 00 0. 0 . 00 5 00 . 5 0 000
1.3750 3.0000 1.1563 19700 5110 3520 24100
. 5 . 00 . 0 00 0. 0 . 00 5 00 . 5 0 000
1.3750 3.0000 1.1563 19700 5110 3520 24100
. 5 . 00 . 0 500 0. 5 . 000 00 . 000
1.3750 3.0000 1.1563 20800 5390 3230 24900
. 5 . 00 . 0 00 0.55 . 0 00 0 00 .0 000
1.3750 3.0000 1.1563 19400 5030 4700 26700
. 5 . 00 . 0 00 0.55 . 0 00 0 00 .0 000
1.3750 3.0000 1.1563 19400 5030 4700 26700
. 5 . . 0 00 0. . 5 00 5 00 . 0 000
1.3750 3.1230 1.1563 21800 5650 3530 26800
. 5 . 5 . 0 00 0. . 5 00 5 00 . 0 000
1.3750 3.1250 1.1563 21800 5650 3530 26800
. 5 . 5 . 0 00 0. . 5 00 5 00 . 0 000
1.3750 3.1250 1.1563 21800 5650 3530 26800
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. . -5. .5 .0 .5 . .0 .0 0. 0 0. 0 . . 0.0 0.
0.9375 0.6875 -0.22 0.14 1.61 1.87 0.13 2.68 2.48 0.04 0.01
0.94
. . -5. 0. .0 .0 . .0 .0 0. 0 0. 0 . . 0.0 0.
0.9375 0.6875 -0.22 0.03 1.61 1.65 0.13 2.68 2.48 0.04 0.01
0.96
. . -5. 0. .0 .0 0. .0 5.0 0. 0 0. 0 . . 0.0 0.
0.9375 0.6875 -0.22 0.03 1.61 1.65 0.03 2.68 2.56 0.04 0.01
0.97
. 5 . - . .5 .0 .5 . .0 .0 . 0 0. 0 0. 0. 0.0 0 0.
0.8750 0.6875 -0.15 0.14 1.65 1.91 0.13 2.68 2.44 0.06 0.04
0.91
. 5 . - . 0. .0 .5 . .0 .0 . 0 0. 0 0. 0. 0.0 0 0.
0.8750 0.6875 -0.15 0.03 1.65 1.67 0.13 2.68 2.44 0.06 0.04
0.92
. 5 . - . 0. .0 .5 0. .0 .0 . 0 0. 0 0. 0. 0.0 0 0.
0.8750 0.6875 -0.15 0.03 1.65 1.67 0.03 2.68 2.52 0.06 0.04
0.94
. 0 .050 - . .5 0.5 .0 . .0 .0 .00 .50 . 0. 0.0 5 0.
0.9688 0.7500 -0.32 0.06 1.59 1.69 0.09 2.68 2.52 0.04 0.06
1.03
. 0 .050 - . .5 0.5 .0 0. .0 5.0 .00 .50 . 0. 0.0 5 0.
0.9688 0.7500 -0.32 0.06 1.59 1.69 0.03 2.68 2.56 0.04 0.06
1.04
. 0 .050 - . .5 0.5 .0 . .0 .0 .00 .50 . 0. 0.0 5 0.
0.9688 0.7500 -0.32 0.14 1.59 1.85 0.09 2.68 2.52 0.04 0.06
1.02
. 0 .050 - . .5 0.5 .0 0. .0 5.0 .00 .50 . 0. 0.0 5 0.
0.9688 0.7500 -0.32 0.14 1.59 1.85 0.03 2.68 2.56 0.04 0.06
1.03
. 0 .050 - . 0. .0 .5 0. .0 5.0 * * . 0. 0.0 5 0.
0.9688 0.7500 -0.32 0.03 1.65 1.67 0.03 2.68 2.56 * *
1.04
5. 5 .050 - . 5.0 .0 5 .0 0. .0 .0 . 0 0. 0 . . 0.0 5 0.
1.0100 0.7500 -0.32 0.20 1.61 2.01 0.03 2.72 2.60 0.06 0.04
1.05
5. 5 .050 - . 0. .0 .0 0. .0 .0 . 0 0. 0 . . 0.0 5 0.
1.0100 0.7500 -0.32 0.03 1.61 1.65 0.03 2.72 2.60 0.06 0.04
1.08
. 5 . 5 - . .5 .0 .0 .5 .0 .0 . 0 0. 0 . 0. 0.0 0.5
1.0620 0.8750 -0.32 0.14 1.65 1.93 0.06 2.68 2.48 0.07 0.03
1.14
5. 5 .050 - . 5.0 .0 5 .0 . 0.0 .0 . 0 0. 0 . . 0.0 5 0.5
1.0100 0.7500 -0.32 0.20 1.61 2.01 0.13 2.76 2.60 0.06 0.04
1.15
5. 5 .050 - . 5.0 .0 5 .0 0. 0.0 .0 . 0 0. 0 . . 0.0 5 0.5
1.0100 0.7500 -0.32 0.20 1.61 2.01 0.03 2.76 2.68 0.06 0.04
1.17
5. 5 .050 - . 0. .0 .0 . 0.0 .0 . 0 0. 0 . . 0.0 5 0.5
1.0100 0.7500 -0.32 0.03 1.61 1.65 0.13 2.76 2.60 0.06 0.04
1.18
5. 5 .050 - . 0. .0 .0 0. 0.0 .0 . 0 0. 0 . . 0.0 5 0.5
1.0100 0.7500 -0.32 0.03 1.61 1.65 0.03 2.76 2.68 0.06 0.04
1.20
5. 5 .050 - . .5 .0 .5 0. 0.0 .0 . 0 0. 0 . . 0.0 5 0.5
1.0100 0.7500 -0.32 0.14 1.61 1.87 0.03 2.76 2.68 0.06 0.04
1.19
.5 5 . - . .5 .5 50.0 . .0 .0 . 0 . 0 . .0 0.0 0.
1.1250 0.9375 -0.30 0.14 1.71 1.97 0.13 2.83 2.52 0.06 0.05
1.35
.5 5 . - . .5 .5 50.0 . .0 .0 . 0 . 0 . .0 0.0 0.
1.1250 0.9375 -0.30 0.14 1.71 1.97 0.05 2.83 2.60 0.06 0.05
1.37
.5 5 . - . .5 .5 .0 . .0 .0 . 0 . 0 . .0 0.0 0.
1.1250 0.9375 -0.30 0.06 1.71 1.81 0.13 2.83 2.52 0.06 0.05
1.36
. 5 . - . .5 .5 5.0 . .0 .0 * * . 0.5 0.0 0.
1.1750 0.9375 -0.36 0.06 1.67 1.77 0.13 2.80 2.60 * *
1.37
.5 5 .0 0 -5. 0. .5 .5 . .0 .0 .00 . 0 . . 0.0 0.
1.1250 0.9063 -0.22 0.03 1.75 1.87 0.13 2.87 2.44 0.08 0.05
1.42
.5 5 .0 0 -5. .5 .5 5 .0 . .0 .0 .00 . 0 . . 0.0 0.
1.1250 0.9063 -0.22 0.14 1.75 2.20 0.13 2.87 2.44 0.08 0.05
1.42
. . - . 0. .5 .0 . .0 .0 . 0 0. 0 . . 0.0 0. 0
1.1721 0.9375 -0.34 0.03 1.71 1.73 0.13 2.91 2.64 0.06 0.04
1.55
. . - . .5 .5 50.0 . .0 .0 . 0 0. 0 . . 0.0 0. 0
1.1721 0.9375 -0.34 0.14 1.71 1.97 0.13 2.91 2.64 0.06 0.04
1.54
. . - . 0. .5 .0 . .0 .0 . 0 0. 0 . . 0.0 0. 0
1.1721 0.9375 -0.34 0.03 1.71 1.73 0.13 2.91 2.64 0.06 0.04
1.55
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 5 0.000 .000 00 0. . 0 00 0 . 00
5
5 A
5 0
5 0
0
0 0
0
A 0
5 5 5
5
X
00X
5
L L 0
L L
1.3750 3.1496 0.8268 16600 4290 2010 18700
. 5 0.000 . 00 0. . 0 00 0 . 00
B
Caption:
1.3750 3.1496 0.9518 16600 4290 2010 18700
. 5 0.0 5 . 5 00 0. 0 . 5 00 0500 . 5 00
1.3750 3.1510 0.8438 13200 3430 2360 15500
. 5 0.0 5 . 0 00 0.5 .0 00 000 .0 00
1.3750 3.1510 0.9688 16200 4210 4040 20500
. 5 0.0 5 . 0 0 000 0. . 0 00 00 . 000
1.3750 3.1510 1.1563 23900 6200 2900 29100
. 5 0. . 00 0. . 0 00 0 . 00
Caption:
1.3750 3.1562 1.0625 16600 4290 2010 18700
. 5 0. . 0 000 0. . 0 00 00 . 000
1.3750 3.1562 1.1562 23900 6200 2900 29100
. 5 0. . 5 0 00 0. 5 . 5 00 00 . 00
1.3750 3.1875 0.8750 13700 3550 2750 16800
. 5 . 55 . 0 0 000 0. . 0 00 00 . 000
T
C
1.3750 3.2187 1.1563 23900 6200 2900 29100
. 5 . . 0 0 000 0. . 0 00 00 . 000
1.3750 3.3125 1.1563 23900 6200 2900 29100
. 5 5. 5 0. 5000 0. 0 . 00 0500 . 5 000
D
1.3750 3.3750 1.1875 25900 6710 4610 33200
. 5 5. 5 0. 5000 0. 0 . 00 0500 . 5 000
B
d
1.3750 3.3750 1.1875 25900 6710 4610 33200
. 5 5. 5 0. 5000 0. 0 . 00 0500 . 5 000
1.3750 3.3750 1.1875 25900 6710 4610 33200
. 5 . 0. 05000 0. . 00 00 . 000
a
1.3750 3.4375 1.1875 23600 6120 3210 30100
. 5 .500 . 0 000 0. . 00 500 . 000
1.3750 3.4843 1.0625 24100 6240 2820 28000
. 5 0. . 55000 0. . 0 00 00 .05 0 000
1.3750 3.5625 1.5625 34900 9040 4400 45900
. 5 5. 50 . 000 0. . 0500 00 .05 000
1.3750 3.7500 1.0938 26400 6850 3330 32400
. .000 .0 0 00 0. . 5 00 0 . 5 00
1.3770 2.6772 0.6307 10600 2740 2080 13000
. . 5. 5 00 0. . 5 00 0 . 5 00
1.3770 2.6875 0.6250 10600 2740 2080 13000
. 5 .0 . 5 50 00 0. .5 00 5 0 .5 00
1.3770 2.7170 0.7813 11400 2950 1930 13900
. 5 .0 . 5 50 00 0. .5 00 5 0 .5 00
1.3770 2.7170 0.7813 11400 2950 1930 13900
. 5 . .00 50 00 0. .5 00 5 0 .5 00
1.3770 2.8345 0.7481 11400 2950 1930 13900
. .000 .0 00 0. . 5 00 0 . 5 00
1.3770 2.8346 0.6700 10600 2740 2080 13000
. 5 .0 5 . 5 50 00 0. .5 00 5 0 .5 00
1.3770 2.8380 0.8813 11400 2950 1930 13900
. 5 . 00 0. 5 5 00 0. 0 . 5 00 0500 . 5 00
1.3770 3.0000 0.8120 13200 3430 2360 15500
. 5 0.000 .00 5 00 0. 0 . 5 00 0500 . 5 00
1.3770 3.1496 0.8270 13200 3430 2360 15500
. 5 . 5. 5 5500 0. . 0 5 0 . 0 00
1.3775 2.3280 0.6250 7990 2070 1480 11000
. 5 . 5. 5 5500 0. . 0 5 0 . 0 00
1.3775 2.3612 0.6250 7990 2070 1480 11000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 0 . - . 0. .5 .5 . 5.0 .0 0. 0 . 0 .5 0.0 0.5
0.8820 0.7018 -0.25 0.03 1.63 1.67 0.05 2.95 2.87 0.03 0.04
1.17
. 0 .000 - . 0. .5 .5 . 5.0 .0 0. 0 . 0 .5 0.0 0.5
0.8820 0.8268 -0.25 0.03 1.63 1.67 0.09 2.95 2.80 0.03 0.04
1.24
0. 0 5. 5 - . .5 .0 .5 .5 .0 .0 . 0 . 0 0. .5 0.0 0 0.
0.8244 0.6250 -0.19 0.06 1.61 1.71 0.06 2.87 2.72 0.09 0.04
1.09
. .5 - .5 0. .5 5.5 .5 5.0 .0 . 0 .50 . . 0.0 0.5
0.9330 0.7288 -0.10 0.03 1.75 1.79 0.06 2.95 2.68 0.13 0.06
1.31
0. . - 0. .5 .5 .0 .5 .5 .0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.14 1.63 1.89 0.06 2.94 2.80 0.07 0.04
1.59
. 0 . - . 0. .5 .5 . 5.0 0.0 0. 0 . 0 .5 0.0 0. 0
0.8820 0.9375 -0.25 0.03 1.63 1.67 0.13 2.95 2.76 0.03 0.04
1.31
0. . - 0. .5 .5 .0 . 5.0 0.0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.14 1.63 1.89 0.13 2.95 2.76 0.07 0.04
1.58
. 5 . - . .5 .0 .5 0. .0 .0 . 0 0. 0 0. 0. 0.0 0 0.55
0.8750 0.6875 -0.15 0.14 1.65 1.91 0.03 2.83 2.64 0.06 0.04
1.22
0. . - 0. .5 .5 .0 . 5.0 .0 . 0 . 0 . . 0.0 0. 5
1.1965 0.9375 -0.43 0.14 1.63 1.89 0.13 2.95 2.80 0.07 0.04
1.66
0. . - 0. .5 .5 .0 . .0 .0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.14 1.63 1.89 0.13 2.99 2.83 0.07 0.04
1.78
0. . - . .5 .0 5 .0 . .0 .0 .50 . 0 . .5 0.0 0.
1.1875 0.9375 -0.32 0.14 1.81 2.09 0.13 3.19 2.87 0.06 0.08
1.95
0. . - . .5 .0 5 .0 . .0 5.0 .50 . 0 . .5 0.0 0.
1.1875 0.9375 -0.32 0.14 1.81 2.09 0.05 3.19 2.95 0.06 0.08
1.97
0. . - . 0. .0 .0 . .0 .0 .50 . 0 . .5 0.0 0.
1.1875 0.9375 -0.32 0.03 1.81 1.85 0.13 3.19 2.87 0.06 0.08
1.96
0. . - 0. .5 .0 .5 . .0 5.0 . 0 0. 0 .5 0.5 0.0 0 0.
1.2160 0.9375 -0.40 0.14 1.69 1.95 0.13 3.19 2.95 0.09 0.03
2.00
.0 . 5 - . 0. .0 .5 .5 0.0 .0 . 0 0. 0 . . 0.0 0.
1.1450 0.8750 -0.38 0.03 1.65 1.67 0.06 3.15 3.03 0.05 0.03
1.92
0. . - 5.0 .5 .0 55.0 . 5.0 .0 . 0 0. 0 5 . . 0.0 .
1.5900 1.3125 -0.59 0.14 1.93 2.17 0.13 3.35 3.03 0.09 0.02
3.01
. 00 . 5 - . 0. .5 .0 . .0 .0 . 0 0. 0 .5 . 0.0 05 .0
1.1772 0.8750 -0.36 0.03 1.71 1.73 0.09 3.43 3.27 0.06 0.02
2.38
.5 0 .000 - .5 .5 0.5 .5 .5 .0 .0 . 0 .50 .5 .5 0.0 0.
0.6504 0.4724 -0.06 0.06 1.59 1.67 0.06 2.52 2.40 0.05 0.06
0.57
.5 0 . 0 - .5 .5 0.5 .5 .5 5.0 .0 . 0 .50 .5 .5 0.0 0.
0.6504 0.4688 -0.06 0.06 1.59 1.67 0.06 2.56 2.40 0.05 0.06
0.58
.5 5. 5 - . . .0 .5 . .0 5 .0 .00 . 0 . 0.0 0.
0.7710 0.6250 -0.17 0.05 1.61 1.67 0.13 2.48 2.32 0.04 0.06
0.70
.5 5. 5 - . . .0 .5 . .0 0.0 .00 . 0 . 0.0 0.
0.7710 0.6250 -0.17 0.05 1.61 1.67 0.05 2.48 2.36 0.04 0.06
0.72
.5 5.0 - . . .0 .5 .5 5.0 .0 .00 . 0 . 0.0 0. 5
0.7710 0.5918 -0.17 0.05 1.61 1.67 0.06 2.56 2.44 0.04 0.06
0.78
.5 0 . - .5 .5 0.5 .5 .5 .0 .0 . 0 .50 .5 .5 0.0 0.
0.6504 0.5625 -0.06 0.06 1.59 1.67 0.06 2.60 2.48 0.05 0.06
0.70
.5 . 5 - . . .0 .5 . 5.0 0.0 .00 . 0 . 0.0 0. 0
0.7710 0.7250 -0.17 0.05 1.61 1.67 0.09 2.56 2.36 0.04 0.06
0.88
0. 0 5. - . .5 .0 .5 .5 .0 .0 . 0 . 0 0. .5 0.0 0 0.
0.8244 0.6100 -0.19 0.06 1.61 1.71 0.06 2.80 2.68 0.09 0.04
0.95
0. 0 5. 5 - . .5 .0 .5 .5 .0 .0 . 0 . 0 0. .5 0.0 0 0.
0.8244 0.6250 -0.19 0.06 1.61 1.71 0.06 2.87 2.72 0.09 0.04
1.08
. . - .5 0.0 .0 5.5 . 5 .0 5 .0 0. 0 0. 0 5. . 0.0 5 0.
0.6600 0.4700 -0.10 0.00 1.54 1.79 0.05 2.20 2.09 0.03 0.03
0.37
. . - .5 0.0 .0 5.5 . 5 .0 5 .0 0. 0 0. 0 5. . 0.0 5 0.
0.6600 0.4700 -0.10 0.00 1.54 1.79 0.05 2.20 2.09 0.03 0.03
0.38
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. . . 00 00 0. . 5 0 00 0 . 5 00 LM A LM 0A
1.3775 2.4399 0.6575 8850 2290 1750 11800
. . . 00 00 0. . 5 0 00 0 . 5 00 LM LM 0A
1.3775 2.4399 0.6575 8850 2290 1750 11800
. . .000 00 0. . 5 0 00 0 . 5 00 LM A LM 0C
1.3775 2.4399 0.7087 8850 2290 1750 11800
. . .000 00 0. . 5 0 00 0 . 5 00 LM LM 0C
1.3775 2.4399 0.7087 8850 2290 1750 11800
. 5. 0. 5 00 0. 5 . 0 5000 050 . 00 M 5 M 5
1.3775 2.5979 0.8125 13000 3370 2030 16400
5.000 0.000 5. 0 00 0.55 . 0 00 00 .0 00 JS- 5 A JS- 5 0
1.3780 2.7559 0.9949 15000 3880 3630 19100
5.000 .000 .0 00 0. . 5 00 0 . 5 00 X
1.3780 2.8346 0.6700 10600 2740 2080 13000
5.000 .000 .0 00 0. . 5 00 0 . 5 00 X X
1.3780 2.8346 0.6700 10600 2740 2080 13000
5.000 .0 5 . 00 0. . 500 00 .5 0 000 0
1.3780 2.8750 1.0625 18600 4830 3050 22900
5.000 .0 5 . 00 0. . 500 00 .5 0 000
1.3780 2.8750 1.0625 18600 4830 3050 22900
5.000 5. . 5 50 00 0. .5 00 5 0 .5 00 X -S
1.3780 2.9650 0.7813 11400 2950 1930 13900
5.000 . 5 . 00 0. . 00 00 . 0000
1.3780 3.1250 0.9375 19000 4920 2680 24800
5.000 0.000 .000 00 0. . 0 00 0 . 00
1.3780 3.1496 0.8268 16600 4290 2010 18700
5.000 0.000 . 00 0. . 00 00 . 0000
1.3780 3.1496 0.9375 19000 4920 2680 24800
5.000 0. 5. 00 00 0. . 00 00 . 0000 0
1.3780 3.1562 1.0000 19000 4920 2680 24800
5.000 0. . 0 00 0. . 5 00 5 00 . 0 000 0
1.3780 3.1562 1.1563 21800 5650 3530 26800
5.000 .550 .5 5 0 000 0. . 00 500 . 000 A
1.3780 3.2500 1.1250 24100 6240 2820 28000
5.000 .500 . 0 000 0. . 00 500 . 000
1.3780 3.4843 1.0625 24100 6240 2820 28000
5. 5.0 .0 50500 0. .5 00 0 .55 00 LM 5 5 LM 5 0
1.3830 2.5625 0.7100 11300 2940 1890 14200
5. 0 .0 5 . 5 00 0. . 00 00 .5 00 0 0
1.3900 2.8750 0.8750 15200 3950 2490 18800
5. . 5. 00 00 0.55 . 0 00 00 .0 00 HM HM 0
1.4062 2.8438 1.0000 16000 4140 3870 21200
. .0 5 . 00 0. .0 0 00 0 00 .0 00 5 0 5 0
1.4365 2.8750 0.9375 17700 4590 2280 21900
. .0 5 . 00 0. .0 0 00 0 00 .0 00 5 0 5
1.4365 2.8750 0.9375 17700 4590 2280 21900
. .0 5 . 0 00 0. 0 . 0 00 0 00 . 0 000 0 5X
1.4365 2.8750 0.9375 18100 4690 2430 23000
. .0 5 . 0 00 0. 0 . 0 00 0 00 . 0 000 5X
1.4365 2.8750 0.9375 18100 4690 2430 23000
. . . 0 00 0. 0 . 0 00 0 00 . 0 000 0
1.4365 2.9375 0.9375 18100 4690 2430 23000
. . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000 0 0
1.4365 3.0000 0.9375 18100 4690 2430 23000
. . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000 0
1.4365 3.0000 0.9375 18100 4690 2430 23000
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.000 . 00 - .5 .5 .5 .0 .5 5 .0 5 .0 0. 0 . 0 . . 0.0 0.
0.6693 0.5354 -0.10 0.06 1.56 1.65 0.06 2.32 2.13 0.03 0.05
0.46
.000 . 00 - .5 .5 0.0 .0 .5 5 .0 5 .0 * * . . 0.0 0. 0
0.6693 0.5354 -0.10 0.14 1.57 1.81 0.06 2.32 2.13 * *
0.44
.000 5.000 - .5 .5 .5 .0 .5 5 .0 5 .0 0. 0 . 0 . . 0.0 0.
0.6693 0.5906 -0.10 0.06 1.56 1.65 0.06 2.32 2.20 0.03 0.05
0.48
.000 5.000 - .5 .5 0.0 .0 .5 5 .0 5 .0 * * . . 0.0 0.
0.6693 0.5906 -0.10 0.14 1.57 1.81 0.06 2.32 2.20 * *
0.46
0. . 0 -5. .5 0.5 .5 . .0 5 .0 0. 0 . 0 0. . 0.0 0 0. 0
0.8125 0.6563 -0.22 0.14 1.59 1.83 0.09 2.44 2.28 0.02 0.09
0.66
.500 .000 - . .0 .0 .0 .5 .5 0.0 . 0 . 0 0. 0.0 0.
0.9252 0.7480 -0.14 0.08 1.65 1.85 0.06 2.62 2.36 0.06 0.06
0.91
.5 0 . - .5 .0 0.5 .5 .5 .0 .0 . 0 .50 .5 .5 0.0 0.
0.6504 0.5625 -0.06 0.08 1.59 1.71 0.06 2.60 2.48 0.05 0.06
0.70
.5 0 . - .5 .0 0.5 .5 .0 .0 .0 . 0 .50 .5 .5 0.0 0.
0.6504 0.5625 -0.06 0.08 1.59 1.71 0.08 2.60 2.44 0.05 0.06
0.70
. 5 . 5 - . .5 .0 .0 .5 .0 .0 . 0 0. 0 . 0. 0.0 0.5
1.0620 0.8750 -0.32 0.14 1.65 1.93 0.06 2.68 2.48 0.07 0.03
1.14
. 5 . 5 - . .5 .0 .0 0. .0 .0 . 0 0. 0 . 0. 0.0 0.5
1.0620 0.8750 -0.32 0.14 1.65 1.93 0.03 2.68 2.48 0.07 0.03
1.14
.5 5. 5 - . .5 .0 .0 . .0 .0 .00 . 0 . 0.0 0. 0
0.7710 0.6250 -0.17 0.14 1.61 1.85 0.13 2.60 2.40 0.04 0.06
0.89
5. 00 .050 - . 0. .0 .5 0. .0 .0 . 0 . 0 . . 0.0 0 0. 0
1.0000 0.7500 -0.29 0.03 1.65 1.67 0.03 2.91 2.80 0.06 0.05
1.33
. 0 . - . 0. .5 .5 . 5.0 .0 0. 0 . 0 .5 0.0 0.5
0.8820 0.7018 -0.25 0.03 1.63 1.67 0.05 2.95 2.87 0.03 0.04
1.17
5. 00 .050 - . 0. .0 .5 . .0 0.0 . 0 . 0 . . 0.0 0 0.
1.0000 0.7500 -0.29 0.03 1.65 1.67 0.05 2.91 2.76 0.06 0.05
1.36
5. 00 0. - . 0. .0 .5 . .0 .0 . 0 . 0 . . 0.0 0 0.
1.0000 0.8125 -0.29 0.03 1.65 1.67 0.13 2.91 2.72 0.06 0.05
1.39
. . - . .5 .5 .0 . .0 .0 . 0 0. 0 . . 0.0 0.
1.1721 0.9375 -0.34 0.06 1.71 1.81 0.13 2.91 2.68 0.06 0.04
1.59
.0 . - . 0. .0 .5 .5 .5 .0 . 0 0. 0 . . 0.0 0. 5
1.1450 0.9375 -0.38 0.03 1.65 1.67 0.06 3.06 2.91 0.05 0.03
1.65
.0 . 5 - . 0. .0 .5 .5 0.0 .0 . 0 0. 0 . . 0.0 0.
1.1450 0.8750 -0.38 0.03 1.65 1.67 0.06 3.15 3.03 0.05 0.03
1.92
. . 0 - . 0. .0 .5 . .0 5 .0 0. 0 . 0 0. 0.0 0. 5
0.7200 0.5500 -0.14 0.03 1.61 1.63 0.05 2.40 2.28 0.03 0.04
0.56
. . -5. .5 .5 .0 . .0 .0 0. 0 0. 0 . . 0.0 0.
0.9375 0.6875 -0.22 0.14 1.63 1.89 0.13 2.68 2.48 0.04 0.01
0.93
5. 00 . - . .5 .5 5 .0 . .0 0.0 . 0 . 0 . 0. 0.0 0.
1.0000 0.7812 -0.18 0.14 1.67 2.13 0.09 2.72 2.36 0.06 0.07
1.05
. 0 .050 - . .5 .0 .0 . .0 .0 .00 .50 . 0. 0.0 5 0. 5
0.9688 0.7500 -0.32 0.06 1.65 1.73 0.09 2.68 2.52 0.04 0.06
0.99
. 0 .050 - . .5 .0 .0 0. .0 5.0 .00 .50 . 0. 0.0 5 0. 5
0.9688 0.7500 -0.32 0.06 1.65 1.73 0.03 2.68 2.56 0.04 0.06
1.00
5. 5 .050 - . .5 .5 .5 0. .0 .0 . 0 0. 0 . . 0.0 5 0.
1.0100 0.7500 -0.32 0.06 1.67 1.75 0.03 2.72 2.60 0.06 0.04
1.04
5. 5 .050 - . .5 .5 .0 0. .0 .0 . 0 0. 0 . . 0.0 5 0.
1.0100 0.7500 -0.32 0.14 1.67 1.93 0.03 2.72 2.60 0.06 0.04
1.03
5. 5 .050 - . .5 .5 .5 0. 0.0 .0 . 0 0. 0 . . 0.0 5 0.50
1.0100 0.7500 -0.32 0.06 1.67 1.75 0.03 2.76 2.64 0.06 0.04
1.10
5. 5 .050 - . .5 .5 .5 . 0.0 .0 . 0 0. 0 . . 0.0 5 0.5
1.0100 0.7500 -0.32 0.06 1.67 1.75 0.13 2.76 2.60 0.06 0.04
1.14
5. 5 .050 - . .5 .5 .5 0. 0.0 .0 . 0 0. 0 . . 0.0 5 0.5
1.0100 0.7500 -0.32 0.06 1.67 1.75 0.03 2.76 2.68 0.06 0.04
1.16
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000
0
0
X
5 5 0
5 5
HM HM 0
HM HM 0
HM HM
0
HM HM 0
0
55 0 55 0
0
JL JL 0
JL A JL 0
JL JL 0
JL X JL 0
X X
0
1.4365 3.0000 0.9375 18100 4690 2430 23000
. . 5 . 0 00 0. 0 . 0 00 0 00 . 0 000
B
Caption:
1.4365 3.1250 0.9375 18100 4690 2430 23000
.5 . 5. 5 00 0. . 5 00 0 . 5 00
1.4375 2.6875 0.6250 10600 2740 2080 13000
.5 .0 .050 5 500 0. 0 . 00 0 . 5 00
1.4375 2.7170 0.7500 11800 3060 2110 15300
.5 .000 .0 00 0. . 5 00 0 . 5 00
1.4375 2.8346 0.6700 10600 2740 2080 13000
.5 .000 .0 00 0. . 5 00 0 . 5 00
Caption:
1.4375 2.8346 0.6700 10600 2740 2080 13000
.5 .000 .000 5 00 0. 0 . 00 50 . 5 5 00
1.4375 2.8346 0.7480 11800 3060 2100 14800
.5 . 0. 5 00 0. 0 . 00 50 . 5 5 00
1.4375 2.8440 0.8125 11800 3060 2100 14800
.5 . 00 . 0 00 0. 0 . 00 5 00 . 5 0 000
T
C
1.4375 3.0000 1.1563 19700 5110 3520 24100
.5 . 00 . 0 00 0. 0 . 00 5 00 . 5 0 000
1.4375 3.0000 1.1563 19700 5110 3520 24100
.5 . 00 . 0 00 0.55 . 0 00 0 00 .0 000
D
1.4375 3.0000 1.1563 19400 5030 4700 26700
.5 . 00 . 0 00 0.55 . 0 00 0 00 .0 000
B
d
1.4375 3.0000 1.1563 19400 5030 4700 26700
.5 . 00 . 0 00 0.55 . 0 00 0 00 .0 000
1.4375 3.0000 1.1563 19400 5030 4700 26700
.5 . 5 . 0 00 0. . 5 00 5 00 . 0 000
a
1.4375 3.1250 1.1563 21800 5650 3530 26800
.5 . 5 . 0 00 0.55 . 0 5 00 00 .0 000
1.4375 3.1250 1.1563 22100 5720 5350 27200
.5 0.000 . 00 0. . 00 00 . 0000
1.4375 3.1496 0.9375 19000 4920 2680 24800
.5 0. 5. 00 00 0. . 00 00 . 0000
1.4375 3.1562 1.0000 19000 4920 2680 24800
.5 0. . 0 00 0. . 5 00 5 00 . 0 000
1.4375 3.1562 1.1563 21800 5650 3530 26800
.5 . . 00 0. . 00 500 . 000
1.4375 3.2650 0.9375 18800 4880 2800 24900
.5 5. 5 0. 5000 0. 0 . 00 0500 . 5 000
1.4375 3.3750 1.1875 25900 6710 4610 33200
.5 .500 5. 00 00 0. 0. 0 00 000 0. 5 00
1.4375 3.4843 1.0000 17500 4540 6070 19900
.5 . . 50 0000 0. 0 . 000 00 . 5 5 000
1.4375 3.6875 1.2500 26900 6980 4800 35500
.000 .000 .000 00 0. . 0 00 0 . 0 55000
1.4961 2.4803 0.6693 8960 2320 1650 12400
.000 .000 .000 00 0. . 0 00 0 . 0 55000
1.4961 2.4803 0.6693 8960 2320 1650 12400
.000 .000 .000 00 0. . 0 00 0 . 0 55000
1.4961 2.4803 0.6693 8960 2320 1650 12400
.000 .000 .000 00 0. . 0 00 0 . 0 55000
1.4961 2.4803 0.6693 8960 2320 1650 12400
.000 .000 .0 0 00 0. . 5 00 0 . 5 00
1.4961 2.6772 0.6307 10600 2740 2080 13000
. 00 .500 . 00 5 00 0. 5 . 5 0 0 . 000
1.5000 2.5000 0.5000 5650 1470 869 7430
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B50 TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
5. 5 .050 - . .5 .5 .0 . 0.0 .0 . 0 0. 0 . . 0.0 5 0.5
1.0100 0.7500 -0.32 0.14 1.67 1.93 0.13 2.76 2.60 0.06 0.04
1.13
5. 5 .050 - . .5 .5 .5 . .0 .0 . 0 0. 0 . . 0.0 5 0.5
1.0100 0.7500 -0.32 0.06 1.67 1.75 0.13 2.83 2.64 0.06 0.04
1.27
.5 0 . 0 - .5 .5 .5 .0 .5 5.0 .0 . 0 .50 .5 .5 0.0 0. 5
0.6504 0.4688 -0.06 0.06 1.63 1.73 0.06 2.56 2.40 0.05 0.06
0.55
.050 5.0 - .0 .5 .5 .0 . 5.0 .0 0. 0 0. 0 0. . 0.0 0. 0
0.7500 0.5938 -0.12 0.14 1.63 1.89 0.09 2.56 2.40 0.04 0.02
0.65
.5 0 . - .5 .5 .5 .0 .5 .0 .0 . 0 .50 .5 .5 0.0 0.
0.6504 0.5625 -0.06 0.06 1.63 1.73 0.06 2.60 2.48 0.05 0.06
0.68
.5 0 . - .5 .5 .5 .0 .0 .0 .0 . 0 .50 .5 .5 0.0 0.
0.6504 0.5625 -0.06 0.06 1.63 1.73 0.08 2.60 2.44 0.05 0.06
0.68
0. . - . .5 .0 .5 .5 .0 .0 . 0 . 0 0. 0. 0.0 0 0. 5
0.8125 0.5605 -0.16 0.14 1.65 1.91 0.06 2.64 2.48 0.05 0.04
0.76
0. 5. 5 - . .5 .0 .5 . .0 .0 . 0 . 0 0. 0. 0.0 0 0.
0.8125 0.6250 -0.16 0.14 1.65 1.91 0.05 2.64 2.48 0.05 0.04
0.81
.5 5 . - . .5 .5 5 .0 . .0 .0 . 0 . 0 . .0 0.0 0.5
1.1250 0.9375 -0.30 0.14 1.75 2.01 0.13 2.83 2.52 0.06 0.05
1.31
.5 5 . - . .5 .5 5 .0 . .0 .0 . 0 . 0 . .0 0.0 0. 0
1.1250 0.9375 -0.30 0.14 1.75 2.01 0.05 2.83 2.60 0.06 0.05
1.33
.5 5 .0 0 -5. 0. .5 .5 . .0 .0 .00 . 0 . . 0.0 0.
1.1250 0.9063 -0.22 0.03 1.75 1.91 0.13 2.87 2.44 0.08 0.05
1.38
.5 5 .0 0 -5. .5 .5 5 .0 . .0 .0 .00 . 0 . . 0.0 0.
1.1250 0.9063 -0.22 0.14 1.75 2.24 0.13 2.87 2.44 0.08 0.05
1.37
.5 5 .0 0 -5. .5 .5 5 .0 0. .0 5.0 .00 . 0 . . 0.0 0.
1.1250 0.9063 -0.22 0.14 1.75 2.24 0.03 2.87 2.56 0.08 0.05
1.39
. . - . 0. .5 5.5 . .0 .0 . 0 0. 0 . . 0.0 0.
1.1721 0.9375 -0.34 0.03 1.75 1.79 0.13 2.91 2.64 0.06 0.04
1.51
. . -5. .5 .0 55.0 . 5.0 .0 . 0 .50 . 0.0 0.
1.1350 0.8923 -0.23 0.14 1.73 2.17 0.13 2.95 2.60 0.09 0.10
1.53
5. 00 .050 - . 0. .0 .0 . .0 0.0 . 0 . 0 . . 0.0 0 0. 0
1.0000 0.7500 -0.29 0.03 1.69 1.73 0.05 2.91 2.76 0.06 0.05
1.32
5. 00 0. - . 0. .0 .0 . .0 .0 . 0 . 0 . . 0.0 0 0.
1.0000 0.8125 -0.29 0.03 1.69 1.73 0.13 2.91 2.72 0.06 0.05
1.36
. . - . 0. .5 5.5 . .0 .0 . 0 0. 0 . . 0.0 0. 0
1.1721 0.9375 -0.34 0.03 1.75 1.79 0.13 2.91 2.68 0.06 0.04
1.55
5. 00 .050 - . .5 5.0 5 .0 0. .0 .0 .00 0. 0 5. . 0.0 0 0.
1.0000 0.7500 -0.25 0.14 1.77 2.01 0.03 3.03 2.91 0.04 0.03
1.45
0. . - . 0. .0 .0 . .0 .0 .50 . 0 . .5 0.0 0.
1.1875 0.9375 -0.32 0.03 1.85 1.89 0.13 3.19 2.87 0.06 0.08
1.92
. . . . 50.0 5 .0 .5 .0 5.0 . 0 . 0 . . 0.0 0.
0.9330 0.6875 0.09 0.09 1.97 2.13 0.06 3.31 2.95 0.15 0.10
1.60
. 50 . 5 - . .5 .0 50.0 . .0 .0 . 0 . 0 . . 0.0 0 . 5
1.2500 1.0313 -0.31 0.06 1.89 1.97 0.13 3.43 3.11 0.08 0.04
2.53
.000 .500 - . . .5 .5 . 0.0 5 .0 0.50 . 0 . .5 0.0 0. 0
0.6693 0.5315 -0.09 0.13 1.67 1.83 0.05 2.36 2.20 0.02 0.05
0.45
.000 .500 - . . .5 .5 . 0.0 5 .0 0. 0 . 0 . .5 0.0 0. 0
0.6693 0.5315 -0.09 0.05 1.67 1.75 0.05 2.36 2.20 0.02 0.05
0.45
.000 .500 - . 0.0 .5 .5 . 0.0 5 .0 0.50 . 0 . .5 0.0 0. 0
0.6693 0.5315 -0.09 0.00 1.67 1.83 0.05 2.36 2.20 0.02 0.05
0.45
.000 .500 - . . .0 .0 . 0.0 5 .0 0. 0 . 0 . 5 0.0 0. 0
0.6693 0.5315 -0.09 0.09 1.69 1.85 0.05 2.36 2.20 0.02 0.05
0.45
.5 0 .000 - .5 .0 .0 .0 .5 .0 .0 . 0 .50 .5 .5 0.0 0.
0.6504 0.4724 -0.06 0.08 1.69 1.81 0.06 2.52 2.40 0.05 0.06
0.52
. 0 .5 5 -0. .5 .5 5.0 0. 0.0 5 .0 0. 0 . 0 . . 0.0 0 0. 5
0.4688 0.3750 -0.03 0.06 1.67 1.77 0.03 2.36 2.32 0.01 0.05
0.33
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 00 5.0 . 00 5 00 0. 5 . 5 0 0 . 000
LM LM 0
LM LM 0
LM LM
50
50
5 0
5
0
5A 0
5A
0
5
50
50
50
50
50
5X
5X
A 5X
A
50 00X
50 00
5 00
1.5000 2.5625 0.5000 5650 1470 869 7430
. 00 5.0 .0 5000 0. . 0 00 0 . 0 00
B
Caption:
1.5000 2.5625 0.7100 10100 2620 1490 13600
. 00 5.0 .0 5000 0. . 0 00 0 . 0 00
1.5000 2.5625 0.7100 10100 2620 1490 13600
. 00 5.0 . 5000 0. . 0 00 0 . 0 00
1.5000 2.5625 0.7800 10100 2620 1490 13600
. 00 . 5. 5 00 0. . 5 00 0 . 5 00
1.5000 2.6875 0.6250 10600 2740 2080 13000
. 00 . . 00 0. . 5 00 0 . 5 00
Caption:
1.5000 2.6875 0.7873 10600 2740 2080 13000
. 00 .0 .050 5 500 0. 0 . 00 0 . 5 00
1.5000 2.7170 0.7500 11800 3060 2110 15300
. 00 .0 .050 5 500 0. 0 . 00 0 . 5 00
1.5000 2.7170 0.7500 11800 3060 2110 15300
. 00 .0 .050 5 500 0. 0 . 00 0 . 5 00
T
C
1.5000 2.7170 0.7500 11800 3060 2110 15300
. 00 .0 .050 5 500 0. 0 . 00 0 . 5 00
1.5000 2.7170 0.7500 11800 3060 2110 15300
. 00 .0 .050 5 500 0. 0 . 00 0 . 5 00
D
1.5000 2.7170 0.7500 11800 3060 2110 15300
. 00 .0 .050 5 500 0. 0 . 00 0 . 5 00
B
d
1.5000 2.7170 0.7500 11800 3060 2110 15300
. 00 .0 . 5 5 500 0. 0 . 00 0 . 5 00
1.5000 2.7170 1.0313 11800 3060 2110 15300
. 00 .0 . 5 5 500 0. 0 . 00 0 . 5 00
a
1.5000 2.7170 1.0313 11800 3060 2110 15300
. 00 . . 5 500 0. 0 . 00 0 . 5 00
1.5000 2.7547 0.8660 11800 3060 2110 15300
. 00 . . 5 500 0. 0 . 00 0 . 5 00
1.5000 2.7547 0.8660 11800 3060 2110 15300
. 00 . 5. 5 00 0. . 5 00 0 . 5 00
1.5000 2.8125 0.6250 10600 2740 2080 13000
. 00 .000 .0 00 0. . 5 00 0 . 5 00
1.5000 2.8346 0.6700 10600 2740 2080 13000
. 00 .000 .000 5 00 0. 0 . 00 50 . 5 5 00
1.5000 2.8346 0.7480 11800 3060 2100 14800
. 00 . 0. 5 00 0. 0 . 00 50 . 5 5 00
1.5000 2.8440 0.8125 11800 3060 2100 14800
. 00 . . 5 00 0. 0 . 00 50 . 5 5 00
1.5000 2.8440 0.9375 11800 3060 2100 14800
. 00 .0 5 . 0 00 0. 0 . 0 00 0 00 . 0 000
1.5000 2.8750 0.9375 18100 4690 2430 23000
. 00 .0 5 . 0 00 0. 0 . 0 00 0 00 . 0 000
1.5000 2.8750 0.9375 18100 4690 2430 23000
. 00 .0 5 . 0 00 0. 0 . 0 00 0 00 . 0 000
1.5000 2.8750 0.9375 18100 4690 2430 23000
. 00 . . 0 00 0. 0 . 0 00 0 00 . 0 000
1.5000 2.9375 0.9375 18100 4690 2430 23000
. 00 . 00 0. 5 5 00 0. 0 . 5 00 0500 . 5 00
1.5000 3.0000 0.8120 13200 3430 2360 15500
. 00 . 00 0. 5 00 0. 0 . 5 00 0500 . 5 00
1.5000 3.0000 0.8125 13200 3430 2360 15500
. 00 . 00 0. 5 00 0. 0 . 5 00 0500 . 5 00
1.5000 3.0000 0.8125 13200 3430 2360 15500
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B5 TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 0 .5 5 -0. .5 .5 5.0 0. .0 5 .0 0. 0 . 0 . . 0.0 0 0.
0.4688 0.3750 -0.03 0.06 1.67 1.77 0.03 2.40 2.32 0.01 0.05
0.35
. . 0 - . .5 .5 .0 . .0 5 .0 0. 0 . 0 0. 5 0.0 0.
0.7200 0.5500 -0.16 0.14 1.67 1.93 0.05 2.44 2.32 0.03 0.04
0.50
. . 0 - . . .5 .5 . .0 5 .0 0. 0 . 0 0. 5 0.0 0.
0.7200 0.5500 -0.16 0.09 1.67 1.83 0.05 2.44 2.32 0.03 0.04
0.51
. 5. - . . .5 .5 . .0 5 .0 0. 0 . 0 0. 5 0.0 0. 5
0.7200 0.6200 -0.16 0.09 1.67 1.83 0.05 2.44 2.28 0.03 0.04
0.55
.5 0 . 0 - .5 .5 .0 5.0 .5 5.0 .0 . 0 .50 .5 .5 0.0 0.
0.6504 0.4688 -0.06 0.06 1.69 1.77 0.06 2.56 2.40 0.05 0.06
0.53
.5 0 .0 0 - .5 .5 .0 5.0 .5 5.0 0.0 . 0 .50 .5 .5 0.0 0.
0.6504 0.6311 -0.06 0.06 1.69 1.77 0.06 2.56 2.36 0.05 0.06
0.61
.050 5.0 - .0 .5 .0 .5 0. 5.0 .0 0. 0 0. 0 0. 0. 0.0 0.
0.7500 0.5938 -0.12 0.14 1.69 1.95 0.03 2.56 2.44 0.04 0.02
0.63
.050 5.0 - .0 .5 .0 .5 . 5.0 .0 0. 0 0. 0 0. 0. 0.0 0.
0.7500 0.5938 -0.12 0.14 1.69 1.95 0.09 2.56 2.40 0.04 0.02
0.62
.050 5.0 - .0 .0 .0 .5 0. 5.0 .0 0. 0 0. 0 0. 0. 0.0 0.
0.7500 0.5938 -0.12 0.08 1.69 1.83 0.03 2.56 2.44 0.04 0.02
0.64
.050 5.0 - .0 .0 .0 .5 . 5.0 .0 0. 0 0. 0 0. 0. 0.0 0.
0.7500 0.5938 -0.12 0.08 1.69 1.83 0.09 2.56 2.40 0.04 0.02
0.63
.050 5.0 - .0 0. .0 .0 0. 5.0 .0 0. 0 0. 0 0. . 0.0 0.
0.7500 0.5938 -0.12 0.03 1.69 1.73 0.03 2.56 2.44 0.04 0.02
0.64
.050 5.0 - .0 0. .0 .0 . 5.0 .0 0. 0 0. 0 0. . 0.0 0.
0.7500 0.5938 -0.12 0.03 1.69 1.73 0.09 2.56 2.40 0.04 0.02
0.63
. 5 5.0 - 0. .5 .0 5.5 0. 5.0 .0 .00 0. 0 0. . 0.0 0. 5
1.0313 0.5938 -0.40 0.06 1.69 1.79 0.03 2.56 2.44 0.32 0.02
0.77
. 5 5.0 - 0. .5 .0 5.5 . 5.0 .0 .00 0. 0 0. . 0.0 0. 5
1.0313 0.5938 -0.40 0.06 1.69 1.79 0.09 2.56 2.40 0.32 0.02
0.76
.050 .0 - .0 .5 .0 .5 .5 5.0 .0 0. 0 0. 0 0. 0. 0.0 0.
0.7500 0.7098 -0.12 0.14 1.69 1.95 0.06 2.56 2.40 0.04 0.02
0.73
.050 .0 - .0 .0 .0 .5 .5 5.0 .0 0. 0 0. 0 0. 0. 0.0 0.
0.7500 0.7098 -0.12 0.08 1.69 1.83 0.06 2.56 2.40 0.04 0.02
0.73
.5 0 . 0 - .5 .5 .0 5.0 .0 .0 .0 . 0 .50 .5 .5 0.0 0.
0.6504 0.4688 -0.06 0.06 1.69 1.77 0.04 2.60 2.48 0.05 0.06
0.60
.5 0 . - .5 .5 .0 5.0 .5 .0 .0 . 0 .50 .5 .5 0.0 0. 0
0.6504 0.5625 -0.06 0.06 1.69 1.77 0.06 2.60 2.48 0.05 0.06
0.66
0. . - . .5 .0 .5 .5 .0 .0 . 0 . 0 0. 0. 0.0 0 0.
0.8125 0.5605 -0.16 0.14 1.69 1.95 0.06 2.64 2.48 0.05 0.04
0.73
0. 5. 5 - . .5 .0 .5 . .0 .0 . 0 . 0 0. 0. 0.0 0 0. 5
0.8125 0.6250 -0.16 0.14 1.69 1.95 0.05 2.64 2.48 0.05 0.04
0.78
0. .050 - . .5 .0 .5 . .0 .0 . 0 . 0 0. 0. 0.0 0 0.
0.8125 0.7500 -0.16 0.14 1.69 1.95 0.09 2.64 2.40 0.05 0.04
0.86
5. 5 .050 - . . .5 5 .0 0. .0 .0 . 0 0. 0 . . 0.0 5 0.
1.0100 0.7500 -0.32 0.17 1.71 2.05 0.03 2.72 2.60 0.06 0.04
0.98
5. 5 .050 - . .5 .5 50.0 0. .0 .0 . 0 0. 0 . . 0.0 5 0. 5
1.0100 0.7500 -0.32 0.14 1.71 1.97 0.03 2.72 2.60 0.06 0.04
0.98
5. 5 .050 - . .5 .5 .0 0. .0 .0 . 0 0. 0 . . 0.0 5 0. 5
1.0100 0.7500 -0.32 0.06 1.71 1.81 0.03 2.72 2.60 0.06 0.04
1.00
5. 5 .050 - . .5 .5 .0 0. 0.0 .0 . 0 0. 0 . . 0.0 5 0.
1.0100 0.7500 -0.32 0.06 1.71 1.81 0.03 2.76 2.64 0.06 0.04
1.06
0. 0 5. - . .5 .5 5.5 .5 .0 .0 . 0 . 0 0. .5 0.0 0 0. 0
0.8244 0.6100 -0.19 0.06 1.71 1.79 0.06 2.80 2.68 0.09 0.04
0.89
0. 0 5.50 - . .5 .5 5.5 . .0 .0 . 0 . 0 0. .5 0.0 0 0. 0
0.8244 0.6105 -0.19 0.06 1.71 1.79 0.05 2.80 2.68 0.09 0.04
0.88
0. 0 5.50 - . .5 .5 50.0 . .0 .0 . 0 . 0 0. .5 0.0 0 0.
0.8244 0.6105 -0.19 0.14 1.71 1.97 0.05 2.80 2.68 0.09 0.04
0.87
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 00 . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000 0
1.5000 3.0000 0.9375 18100 4690 2430 23000
. 00 . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000 0
1.5000 3.0000 0.9375 18100 4690 2430 23000
. 00 . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000 0
1.5000 3.0000 0.9375 18100 4690 2430 23000
. 00 . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000
1.5000 3.0000 0.9375 18100 4690 2430 23000
. 00 . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000 X
1.5000 3.0000 0.9375 18100 4690 2430 23000
. 00 . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000 A 0
1.5000 3.0000 0.9375 18100 4690 2430 23000
. 00 . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000 A
1.5000 3.0000 0.9375 18100 4690 2430 23000
. 00 . 00 5. 00 00 0. . 00 00 . 0000
1.5000 3.0000 1.0000 19000 4920 2680 24800
. 00 . 5 . 00 0. . 00 00 . 0000
1.5000 3.1250 0.9375 19000 4920 2680 24800
. 00 . 5 5. 00 0 00 0. 0 . 0 00 0 00 . 0 000
1.5000 3.1250 1.0000 18100 4690 2430 23000
. 00 . 5 5. 00 0 00 0. 0 . 0 00 0 00 . 0 000
1.5000 3.1250 1.0000 18100 4690 2430 23000
. 00 . 5 . 0 00 0. . 5 00 5 00 . 0 000 0 0
1.5000 3.1250 1.1563 21800 5650 3530 26800
. 00 . . 0 0 000 0. . 0 00 00 . 000 5
1.5000 3.1486 1.1563 23900 6200 2900 29100
. 00 0.000 .00 5 00 0. 0 . 5 00 0500 . 5 00 50 5A
1.5000 3.1496 0.8270 13200 3430 2360 15500
. 00 0.000 . 00 0. . 00 00 . 0000
1.5000 3.1496 0.9375 19000 4920 2680 24800
. 00 0.0 5 . 0 00 0.5 .0 00 000 .0 00 0 0
1.5000 3.1510 0.9688 16200 4210 4040 20500
. 00 0.0 5 . 0 00 0.5 .0 00 000 .0 00 0
1.5000 3.1510 0.9688 16200 4210 4040 20500
. 00 0.0 5 . 0 0 000 0. . 0 00 00 . 000
1.5000 3.1510 1.1563 23900 6200 2900 29100
. 00 0. 5. 00 00 0. . 00 00 . 0000 0
1.5000 3.1562 1.0000 19000 4920 2680 24800
. 00 0. 5. 00 00 0. . 00 00 . 0000 0
1.5000 3.1562 1.0000 19000 4920 2680 24800
. 00 0. . 00 0. . 0 00 0 . 00 0
1.5000 3.1562 1.0625 16600 4290 2010 18700
. 00 0. . 0 0 000 0. . 0 00 00 . 000 0
1.5000 3.1562 1.1563 23900 6200 2900 29100
. 00 0. . 0 0 000 0. . 0 00 00 . 000
1.5000 3.1562 1.1563 23900 6200 2900 29100
. 00 0. . 0 0 000 0. . 0 00 00 . 000 0
1.5000 3.1562 1.1563 23900 6200 2900 29100
. 00 . 55 . 0 0 000 0. . 0 00 00 . 000
1.5000 3.2187 1.1563 23900 6200 2900 29100
. 00 . 55 . 0 0 000 0. . 0 00 00 . 000
1.5000 3.2187 1.1563 23900 6200 2900 29100
. 00 .550 . 0 5 00 0.55 . 0 00 000 .0 0000 HM 0 HM 0 0
1.5000 3.2500 1.1563 21400 5540 5180 29300
. 00 .550 . 0 5 00 0.55 . 0 00 000 .0 0000 HM 0 HM 0
1.5000 3.2500 1.1563 21400 5540 5180 29300
B
Caption:
Caption:
C
D
B
d
a
B5 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
5. 5 .050 - . . .5 5 .0 . 0.0 .0 . 0 0. 0 . . 0.0 5 0.
1.0100 0.7500 -0.32 0.17 1.71 2.05 0.13 2.76 2.60 0.06 0.04
1.08
5. 5 .050 - . 5.5 .5 5 .0 . 0.0 .0 . 0 0. 0 . . 0.0 5 0.
1.0100 0.7500 -0.32 0.22 1.71 2.13 0.13 2.76 2.60 0.06 0.04
1.07
5. 5 .050 - . .5 .5 50.0 . 0.0 .0 . 0 0. 0 . . 0.0 5 0.
1.0100 0.7500 -0.32 0.14 1.71 1.97 0.13 2.76 2.60 0.06 0.04
1.09
5. 5 .050 - . .5 .5 50.0 0. 0.0 .0 . 0 0. 0 . . 0.0 5 0.50
1.0100 0.7500 -0.32 0.14 1.71 1.97 0.03 2.76 2.68 0.06 0.04
1.11
5. 5 .050 - . .5 .5 50.0 .5 0.0 .0 . 0 0. 0 . . 0.0 5 0.50
1.0100 0.7500 -0.32 0.14 1.71 1.97 0.06 2.76 2.64 0.06 0.04
1.10
5. 5 .050 - . .5 .5 .0 . 0.0 .0 . 0 0. 0 . . 0.0 5 0.50
1.0100 0.7500 -0.32 0.06 1.71 1.81 0.13 2.76 2.60 0.06 0.04
1.10
5. 5 .050 - . .5 .5 .0 0. 0.0 .0 . 0 0. 0 . . 0.0 5 0.5
1.0100 0.7500 -0.32 0.06 1.71 1.81 0.03 2.76 2.68 0.06 0.04
1.12
5. 00 0. - . 0. .5 5.0 .5 .0 .0 . 0 . 0 . . 0.0 0 0.5
1.0000 0.8125 -0.29 0.03 1.75 1.77 0.06 2.87 2.72 0.06 0.05
1.16
5. 00 .050 - . 0. .5 5.0 0. .0 .0 . 0 . 0 . . 0.0 0 0.5
1.0000 0.7500 -0.29 0.03 1.75 1.77 0.03 2.91 2.80 0.06 0.05
1.26
5. 5 0. - . . .5 5 .0 . .0 .0 . 0 0. 0 . . 0.0 5 0.5
1.0100 0.8125 -0.32 0.17 1.71 2.05 0.13 2.83 2.64 0.06 0.04
1.26
5. 5 0. - . .5 .5 50.0 . .0 .0 . 0 0. 0 . . 0.0 5 0.5
1.0100 0.8125 -0.32 0.14 1.71 1.97 0.13 2.83 2.64 0.06 0.04
1.27
. . - . .5 5.5 5 .0 . .0 .0 . 0 0. 0 . . 0.0 0.
1.1721 0.9375 -0.34 0.14 1.80 2.05 0.13 2.91 2.64 0.06 0.04
1.45
0. . - 0. 0. .5 5.0 . .5 0.0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.03 1.75 1.77 0.13 2.94 2.76 0.07 0.04
1.48
0. 0 5. 5 - . .5 .5 5.5 .0 .0 .0 . 0 . 0 0. .5 0.0 0 0.
0.8244 0.6250 -0.19 0.06 1.71 1.79 0.08 2.87 2.72 0.09 0.04
1.01
5. 00 .050 - . 0. .5 5.0 . .0 0.0 . 0 . 0 . . 0.0 0 0.5
1.0000 0.7500 -0.29 0.03 1.75 1.77 0.05 2.91 2.76 0.06 0.05
1.28
. .5 - .5 0. .0 .0 .5 5.0 .0 . 0 .50 . . 0.0 0.5
0.9330 0.7288 -0.10 0.03 1.85 1.89 0.06 2.95 2.68 0.13 0.06
1.23
. .5 - .5 .5 .0 5 .0 .5 5.0 .0 . 0 .50 . . 0.0 0.55
0.9330 0.7288 -0.10 0.14 1.85 2.09 0.06 2.95 2.68 0.13 0.06
1.22
0. . - 0. 0. .5 5.0 .5 .5 .0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.03 1.75 1.77 0.06 2.94 2.80 0.07 0.04
1.50
5. 00 0. - . 0. .5 5.0 . .0 .0 . 0 . 0 . . 0.0 0 0. 0
1.0000 0.8125 -0.29 0.03 1.75 1.77 0.13 2.91 2.72 0.06 0.05
1.32
5. 00 0. - . 0. .5 5.0 0. .0 .0 . 0 . 0 . . 0.0 0 0.
1.0000 0.8125 -0.29 0.03 1.75 1.77 0.03 2.91 2.80 0.06 0.05
1.34
. 0 . - . .5 .0 50.0 . 5.0 0.0 0. 0 . 0 .5 0.0 0.5
0.8820 0.9375 -0.25 0.14 1.73 1.97 0.13 2.95 2.76 0.03 0.04
1.23
0. . - 0. .5 .5 5 .0 . 5.0 0.0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.14 1.75 2.01 0.13 2.95 2.76 0.07 0.04
1.48
0. . - 0. .5 .5 5 .0 0. .5 .0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.14 1.75 2.01 0.03 2.94 2.83 0.07 0.04
1.50
0. . - 0. 0. .5 5.0 . 5.0 0.0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.03 1.75 1.77 0.13 2.95 2.76 0.07 0.04
1.49
0. . - 0. .5 .5 5 .0 . 5.0 .0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.14 1.75 2.01 0.13 2.95 2.80 0.07 0.04
1.56
0. . - 0. 0. .5 5.0 . 5.0 .0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.03 1.75 1.77 0.13 2.95 2.80 0.07 0.04
1.57
.5 5 .0 0 - . 0. .0 5 .0 . .0 .0 . 0 . 0 . 0.0 0.
1.1250 0.9063 -0.19 0.03 1.93 2.01 0.13 3.07 2.68 0.08 0.07
1.68
.5 5 .0 0 - . 0. .0 5 .0 0. .0 0.0 . 0 . 0 . 0.0 0.
1.1250 0.9063 -0.19 0.03 1.93 2.01 0.03 3.07 2.76 0.08 0.07
1.71
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B55
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 00 .550 . 0 5 00 0.55 . 0 00 000 .0 0000 HM 0 X HM 0 0
1.5000 3.2500 1.1563 21400 5540 5180 29300
. 00 . . 00 0. . 00 500 . 000 55 55 0
1.5000 3.2650 0.9375 18800 4880 2800 24900
. 00 5.000 . 00 0. . 00 500 . 000 55 55
1.5000 3.3465 0.9375 18800 4880 2800 24900
. 00 5. 5 0. 5000 0. 0 . 00 0500 . 5 000 5 0
1.5000 3.3750 1.1875 25900 6710 4610 33200
. 00 5. 5 0. 5000 0. 0 . 00 0500 . 5 000 0
1.5000 3.3750 1.1875 25900 6710 4610 33200
. 00 5. 5 0. 5000 0. 0 . 00 0500 . 5 000
1.5000 3.3750 1.1875 25900 6710 4610 33200
. 00 . 0. 05000 0. . 00 00 . 000 5 0 5 5
1.5000 3.4375 1.1875 23600 6120 3210 30100
. 00 . 0. 05000 0. . 00 00 . 000 5 5 5
1.5000 3.4375 1.1875 23600 6120 3210 30100
. 00 .500 5. 00 00 0. 0. 0 00 000 0. 5 00 50
1.5000 3.4843 1.0000 17500 4540 6070 19900
. 00 .500 . 0 000 0. . 00 500 . 000
1.5000 3.4843 1.0625 24100 6240 2820 28000
. 00 .500 . 0 000 0. . 00 500 . 000 A
1.5000 3.4843 1.0625 24100 6240 2820 28000
. 00 . 00 . 0 000 0. . 00 500 . 000 X
1.5000 3.5000 1.0625 24100 6240 2820 28000
. 00 0. . 55000 0. . 0 00 00 .05 0 000 5 5
1.5000 3.5625 1.5625 34900 9040 4400 45900
. 00 . . 50 000 0. . 00 0 00 . 5 000 5
1.5000 3.6875 1.2500 28200 7320 4510 35000
. 00 5. 50 . 000 0. . 0500 00 .05 000 0
1.5000 3.7500 1.0938 26400 6850 3330 32400
. 00 5. 50 . 000 0. . 0500 00 .05 000
1.5000 3.7500 1.0938 26400 6850 3330 32400
. 00 5. 50 . 0000 0. . 00 00 . 000 0
1.5000 3.7500 1.0938 27000 7000 3950 36200
. 00 5. 50 0. 5 00 0. 0. 000 0500 0. 0 000 5 50 5 5
1.5000 3.7500 1.2188 20900 5410 6850 23400
. 00 5. 50 0. 5 0 000 0. 0. 00 5000 0. 000 HM 0 HM 0 0
1.5000 3.7500 1.2188 24000 6210 7870 29700
. 00 . 5 0. 5 00 0. 0. 000 0500 0. 0 000 5 50 5
1.5000 3.8750 1.2188 20900 5410 6850 23400
. 00 . 5 0. 5 0 000 0. 0. 00 5000 0. 000 HM 0 HM 0
1.5000 3.8750 1.2188 24000 6210 7870 29700
. 00 0 . 00 . 5 5 000 0. . 0 500 00 .05 000 5 5 5
1.5000 4.0000 1.3750 34300 8880 4340 43000
. 00 0 . 00 . 5 5 000 0. . 0 500 00 .05 000 5 5X 5
1.5000 4.0000 1.3750 34300 8880 4340 43000
. 00 0 . . 00 5 000 0. 0 .0 00 000 . 0 000 5 5 A
1.5000 4.0625 1.5000 35800 9290 4720 46200
. 00 0 . 50 . 000 0. . 00 00 . 000 55A 5 A
1.5000 4.2500 1.0938 28200 7320 4200 37200
. 00 . 5 . 00 5 000 0. 0 .0 00 000 . 0 000 5 5 A
1.5000 4.3750 1.5000 35800 9290 4720 46200
. .500 . 00 5 00 0. 5 . 5 0 0 . 000 0 0
1.5150 2.5000 0.5000 5650 1470 869 7430
. 5.0 . 00 5 00 0. 5 . 5 0 0 . 000 0
1.5150 2.5625 0.5000 5650 1470 869 7430
B
Caption:
Caption:
C
D
B
d
a
B5 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.5 5 .0 0 - . . .0 5 .0 . .0 .0 . 0 . 0 . 0.0 0.
1.1250 0.9063 -0.19 0.09 1.93 2.13 0.13 3.07 2.68 0.08 0.07
1.68
5. 00 .050 - . 0. .0 .0 0. .0 .0 .00 0. 0 5. . 0.0 0 0.
1.0000 0.7500 -0.25 0.03 1.81 1.81 0.03 3.03 2.91 0.04 0.03
1.42
5. 00 .050 - . 0. .0 .0 . .0 .0 .00 0. 0 5. . 0.0 0 0.
1.0000 0.7500 -0.25 0.03 1.81 1.81 0.09 3.07 2.91 0.04 0.03
1.50
0. . - . 0. .5 .5 . .0 .0 .50 . 0 . .5 0.0 0. 5
1.1875 0.9375 -0.32 0.03 1.91 1.95 0.13 3.19 2.87 0.06 0.08
1.87
0. . - . .5 .5 55.0 . .0 .0 .50 . 0 . .5 0.0 0.
1.1875 0.9375 -0.32 0.14 1.91 2.17 0.13 3.19 2.87 0.06 0.08
1.86
0. . - . .5 .5 55.0 . .0 5.0 .50 . 0 . .5 0.0 0. 5
1.1875 0.9375 -0.32 0.14 1.91 2.17 0.05 3.19 2.95 0.06 0.08
1.88
0. . - 0. .5 5.5 .0 . .0 5.0 . 0 0. 0 .5 0.5 0.0 0 0.
1.2160 0.9375 -0.40 0.06 1.79 1.89 0.13 3.19 2.95 0.09 0.03
1.91
0. . - 0. .5 5.5 5 .0 . .0 5.0 . 0 0. 0 .5 0.5 0.0 0 0.
1.2160 0.9375 -0.40 0.14 1.79 2.05 0.13 3.19 2.95 0.09 0.03
1.90
. . . . 5 .0 55.0 .5 .0 5.0 . 0 . 0 . . 0.0 0.
0.9330 0.6875 0.09 0.09 2.00 2.17 0.06 3.31 2.95 0.15 0.10
1.56
.0 . 5 - . .5 .5 5 .0 .5 0.0 .0 . 0 0. 0 . . 0.0 0.
1.1450 0.8750 -0.38 0.14 1.75 2.01 0.06 3.15 3.03 0.05 0.03
1.81
.0 . 5 - . .5 .5 5 .0 . 0.0 .0 . 0 0. 0 . . 0.0 0.
1.1450 0.8750 -0.38 0.14 1.75 2.01 0.13 3.15 2.99 0.05 0.03
1.80
.0 . 5 - . .5 .5 5 .0 0. 0.0 .0 . 0 0. 0 . . 0.0 0.
1.1450 0.8750 -0.38 0.14 1.75 2.01 0.03 3.15 3.07 0.05 0.03
1.84
0. . - 5.0 .5 5 .0 5 .0 . 5.0 .0 . 0 0. 0 5 . . 0.0 .
1.5900 1.3125 -0.59 0.06 2.01 2.09 0.13 3.35 3.03 0.09 0.02
2.89
. 50 5. 00 - . 0. .0 .5 . .0 .0 .00 0. 0 . . 0.0 .0
1.2500 1.0000 -0.36 0.03 1.89 1.91 0.13 3.43 3.23 0.12 0.03
2.39
. 00 . 5 - . 0. 5.5 .5 . .0 .0 . 0 0. 0 .5 . 0.0 05 .0
1.1772 0.8750 -0.36 0.03 1.79 1.83 0.09 3.43 3.27 0.06 0.02
2.29
. 00 . 5 - . .5 5.5 5 .0 . .0 .0 . 0 0. 0 .5 . 0.0 05 .0
1.1772 0.8750 -0.36 0.14 1.79 2.05 0.09 3.43 3.27 0.06 0.02
2.27
.5 5 . 5 - . .5 .0 5 .0 . 0.0 5.0 . 0 . 0 5 .5 .5 0.0 0 .05
1.1250 0.8750 -0.30 0.14 1.89 2.13 0.09 3.54 3.35 0.05 0.09
2.31
. 0 0. -0. .5 5 .5 55.0 0. .0 .0 5. 0 . 0 . . 0.0 0 .0
1.1142 0.8125 -0.01 0.06 2.07 2.17 0.03 3.50 3.19 0.22 0.08
2.25
.5 5 . 5 0.5 .5 5 .0 .0 0. .0 .0 . 0 .00 . . 0. 0 0 .0
1.1250 0.8750 0.02 0.14 2.13 2.40 0.03 3.58 3.19 0.16 0.08
2.40
. 0 0. -0. .5 5 .5 55.0 0. .0 .0 5. 0 . 0 . . 0.0 0 . 0
1.1142 0.8125 -0.01 0.06 2.07 2.17 0.03 3.58 3.23 0.22 0.08
2.42
.5 5 . 5 0.5 .5 5 .0 .0 0. .0 .0 . 0 .00 . . 0. 0 0 .
1.1250 0.8750 0.02 0.14 2.13 2.40 0.03 3.62 3.23 0.16 0.08
2.58
.0 . - . .5 .0 5 .0 . 5.0 .0 . 0 . 0 5 . . 0.0 .
1.4200 1.0625 -0.50 0.14 1.89 2.13 0.13 3.74 3.50 0.11 0.07
3.26
.0 . - . 0. .0 .0 . 5.0 .0 . 0 . 0 5 . . 0.0 .
1.4200 1.0625 -0.50 0.03 1.89 1.93 0.13 3.74 3.50 0.11 0.07
3.28
. 5 0. - . .5 .0 55.0 .5 .0 .0 . 0 0. 0 . . 0.0 . 5
1.4550 1.1875 -0.48 0.14 1.93 2.17 0.06 3.86 3.66 0.11 0.04
3.63
. . 5 - . .5 .5 5 .0 0. 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 0.8750 -0.28 0.14 1.95 2.20 0.03 3.94 3.82 0.09 0.05
3.15
. 5 0. - . .5 .0 55.0 . 00.0 5.0 . 0 0. 0 . . 0.0 . 5
1.4550 1.1875 -0.48 0.14 1.93 2.17 0.13 3.94 3.74 0.11 0.04
4.30
. 0 .5 5 -0. 0. .0 .0 0. 0.0 5 .0 0. 0 . 0 . . 0.0 0 0. 5
0.4688 0.3750 -0.03 0.02 1.69 1.69 0.03 2.36 2.32 0.01 0.05
0.32
. 0 .5 5 -0. 0. .0 .0 0. .0 5 .0 0. 0 . 0 . . 0.0 0 0.
0.4688 0.3750 -0.03 0.02 1.69 1.69 0.03 2.40 2.32 0.01 0.05
0.35
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
.000 .0 . 00 5 00 0. 0 . 00 50 . 5 5 00
J 5 J 5
5 5 0
5X
M 0 0 M 0 0
0
0
0 A
5
5
0 0
0 0
0
0
0
0
0
5
5
0
1.5354 2.8352 0.8425 11800 3060 2100 14800
. .0 5 . 000 0. 5 . 00 0 . 5 00
B
Caption:
1.5625 2.8750 0.6562 10600 2740 1640 13100
. .0 5 . 0 00 0. 0 . 0 00 0 00 . 0 000
1.5625 2.8750 0.9375 18100 4690 2430 23000
. .0 5 5. 5 000 0. . 0 00 0000 . 00
1.5625 2.8750 1.0100 15300 3960 2260 20000
. . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000
1.5625 3.0000 0.9375 18100 4690 2430 23000
. . 00 . 0 00 0. 0 . 0 00 0 00 . 0 000
Caption:
1.5625 3.0000 0.9375 18100 4690 2430 23000
. . 00 5. 00 00 0. . 00 00 . 0000
1.5625 3.0000 1.0000 19000 4920 2680 24800
. . 5 . 00 0. . 00 00 . 0000
1.5625 3.1250 0.9375 19000 4920 2680 24800
. . 5 . 00 0. . 00 00 . 0000
T
C
1.5625 3.1250 0.9375 19000 4920 2680 24800
. . 5 . 00 0. . 00 00 . 0000
1.5625 3.1250 0.9375 19000 4920 2680 24800
. . . 0 0 000 0. . 0 00 00 . 000
D
1.5625 3.1486 1.1563 23900 6200 2900 29100
. . . 0 0 000 0. . 0 00 00 . 000
B
d
1.5625 3.1486 1.1563 23900 6200 2900 29100
. 0.000 . 00 0. . 00 00 . 0000
1.5625 3.1496 0.9375 19000 4920 2680 24800
. 0.0 5 . 0 0 000 0. . 0 00 00 . 000
a
1.5625 3.1510 1.1563 23900 6200 2900 29100
. 0. 5. 00 00 0. . 00 00 . 0000
1.5625 3.1562 1.0000 19000 4920 2680 24800
. 0. 5. 00 00 0. . 00 00 . 0000
1.5625 3.1562 1.0000 19000 4920 2680 24800
. 0. 5. 00 00 0. . 00 00 . 0000
1.5625 3.1562 1.0000 19000 4920 2680 24800
. 0. 5. 00 00 0. . 00 00 . 0000
1.5625 3.1562 1.0000 19000 4920 2680 24800
. 0. . 0 0 000 0. . 0 00 00 . 000
1.5625 3.1562 1.1563 23900 6200 2900 29100
. 0. . 0 0 000 0. . 0 00 00 . 000
1.5625 3.1562 1.1563 23900 6200 2900 29100
. 0. . 0 0 000 0. . 0 00 00 . 000
1.5625 3.1562 1.1563 23900 6200 2900 29100
. 0. . 0 0 000 0. . 0 00 00 . 000
1.5625 3.1562 1.1563 23900 6200 2900 29100
. 0. . 0 00 0. . 00 00 . 0000
1.5625 3.1562 1.1563 19000 4920 2680 24800
. . . 0 0 000 0. . 0 00 00 . 000
1.5625 3.3125 1.1563 23900 6200 2900 29100
. . . 0 0 000 0. . 0 00 00 . 000
1.5625 3.3125 1.1563 23900 6200 2900 29100
. .500 5. 00 00 0. 0. 0 00 000 0. 5 00
1.5625 3.4843 1.0000 17500 4540 6070 19900
. .500 5. 00 00 0. 0. 0 00 000 0. 5 00
1.5625 3.4843 1.0000 17500 4540 6070 19900
. 0. 50 . 5 000 0. . 00 00 . 000
1.5625 4.7500 1.6250 43200 11200 6020 54800
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B5 TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
0. . - . .5 .5 5 .0 0. .0 .0 . 0 . 0 0. 0. 0.0 0 0.
0.8125 0.6550 -0.16 0.14 1.75 2.01 0.02 2.64 2.48 0.05 0.04
0.79
. . 00 - . 0. 5.0 5.5 .5 .0 .0 0.50 . 0 5. 0.0 0. 0
0.6875 0.5000 -0.11 0.03 1.77 1.79 0.06 2.72 2.60 0.02 0.05
0.65
5. 5 .050 - . .5 5.0 5 .0 0. .0 .0 . 0 0. 0 . . 0.0 5 0.
1.0100 0.7500 -0.32 0.14 1.77 2.05 0.03 2.72 2.60 0.06 0.04
0.94
.0 . -5. 0. .0 5.5 . .0 .0 0.50 .00 .5 5 0.0 0.
0.8700 0.8400 -0.23 0.03 1.89 1.79 0.09 2.72 2.52 0.02 0.08
0.94
5. 5 .050 - . .5 5.0 5 .0 . 0.0 .0 . 0 0. 0 . . 0.0 5 0.
1.0100 0.7500 -0.32 0.14 1.77 2.05 0.13 2.76 2.60 0.06 0.04
1.04
5. 5 .050 - . .5 5.0 5 .0 0. 0.0 .0 . 0 0. 0 . . 0.0 5 0.
1.0100 0.7500 -0.32 0.14 1.77 2.05 0.03 2.76 2.68 0.06 0.04
1.06
5. 00 0. - . .5 5.5 5 .0 .5 .0 .0 . 0 . 0 . . 0.0 0 0.50
1.0000 0.8125 -0.29 0.14 1.79 2.05 0.06 2.87 2.72 0.06 0.05
1.10
5. 00 .050 - . .5 5.5 .0 0. .0 .0 . 0 . 0 . . 0.0 0 0.55
1.0000 0.7500 -0.29 0.06 1.79 1.89 0.03 2.91 2.80 0.06 0.05
1.21
5. 00 .050 - . .5 5.5 5 .0 0. .0 .0 . 0 . 0 . . 0.0 0 0.5
1.0000 0.7500 -0.29 0.14 1.79 2.05 0.03 2.91 2.80 0.06 0.05
1.20
5. 00 .050 - . .5 5.5 .0 . .0 .0 . 0 . 0 . . 0.0 0 0.5
1.0000 0.7500 -0.29 0.06 1.79 1.89 0.09 2.91 2.72 0.06 0.05
1.20
0. . - 0. .5 5.5 5 .0 . .5 0.0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.14 1.79 2.05 0.13 2.94 2.76 0.07 0.04
1.42
0. . - 0. 0. 5.5 .5 . .5 0.0 . 0 . 0 . . 0.0 0. 5
1.1965 0.9375 -0.43 0.03 1.79 1.83 0.13 2.94 2.76 0.07 0.04
1.43
5. 00 .050 - . .5 5.5 5 .0 . .0 0.0 . 0 . 0 . . 0.0 0 0.55
1.0000 0.7500 -0.29 0.14 1.79 2.05 0.05 2.91 2.76 0.06 0.05
1.22
0. . - 0. 0. 5.5 .5 .5 .5 .0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.03 1.79 1.83 0.06 2.94 2.80 0.07 0.04
1.45
5. 00 0. - . .5 5.5 .0 . .0 .0 . 0 . 0 . . 0.0 0 0.5
1.0000 0.8125 -0.29 0.06 1.79 1.89 0.13 2.91 2.72 0.06 0.05
1.27
5. 00 0. - . .5 5.5 .0 0. .0 .0 . 0 . 0 . . 0.0 0 0.5
1.0000 0.8125 -0.29 0.06 1.79 1.89 0.03 2.91 2.80 0.06 0.05
1.29
5. 00 0. - . .5 5.5 5 .0 . .0 .0 . 0 . 0 . . 0.0 0 0.5
1.0000 0.8125 -0.29 0.14 1.79 2.05 0.13 2.91 2.72 0.06 0.05
1.26
5. 00 0. - . .5 5.5 5 .0 0. .0 .0 . 0 . 0 . . 0.0 0 0.5
1.0000 0.8125 -0.29 0.14 1.79 2.05 0.03 2.91 2.80 0.06 0.05
1.28
0. . - 0. .5 5.5 5 .0 . 5.0 0.0 . 0 . 0 . . 0.0 0. 5
1.1965 0.9375 -0.43 0.14 1.79 2.05 0.13 2.95 2.76 0.07 0.04
1.43
0. . - 0. .5 5.5 5 .0 0. .5 .0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.14 1.79 2.05 0.03 2.94 2.83 0.07 0.04
1.45
0. . - 0. 0. 5.5 .5 . 5.0 0.0 . 0 . 0 . . 0.0 0. 5
1.1965 0.9375 -0.43 0.03 1.79 1.83 0.13 2.95 2.76 0.07 0.04
1.44
0. . - 0. 0. 5.5 .5 0. .5 .0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.03 1.79 1.83 0.03 2.94 2.83 0.07 0.04
1.46
5. 00 . 0 - . .5 5.5 .0 . .0 .0 . 0 . 0 . . 0.0 0 0.
1.0000 0.9688 -0.29 0.06 1.79 1.89 0.13 2.91 2.68 0.06 0.05
1.40
0. . - 0. .5 5.5 5 .0 . .0 .0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.14 1.79 2.05 0.13 2.99 2.83 0.07 0.04
1.64
0. . - 0. 0. 5.5 .5 . .0 .0 . 0 . 0 . . 0.0 0. 5
1.1965 0.9375 -0.43 0.03 1.79 1.83 0.13 2.99 2.83 0.07 0.04
1.65
. . . . 5 .0 5 .0 .5 .0 5.0 . 0 . 0 . . 0.0 0.
0.9330 0.6875 0.09 0.09 2.00 2.20 0.06 3.31 2.95 0.15 0.10
1.52
. . . .5 5 .0 5 .0 .5 .0 5.0 . 0 . 0 . . 0.0 0.
0.9330 0.6875 0.09 0.14 2.00 2.28 0.06 3.31 2.95 0.15 0.10
1.51
. 5 . 50 - .0 0. 5 .0 5 .0 . 0.0 05.0 . 0 . 0 5. . 0.0 .5
1.6250 1.2500 -0.55 0.03 2.05 2.09 0.13 4.33 4.13 0.15 0.07
5.58
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 0 . 00 . 5 00 0. 0 . 5 00 0500 . 5 00 5 00
1.5740 3.0000 0.7617 13200 3430 2360 15500
. 0 . 00 0. 5 00 0. 0 . 5 00 0500 . 5 00 5 00
1.5740 3.0000 0.8125 13200 3430 2360 15500
. 0 0.0 5 0. 5 00 0. 0 . 5 00 0500 . 5 00 5
1.5740 3.1510 0.7930 13200 3430 2360 15500
. 0. 5 .000 000 0. . 0 500 00 . 000 HM 0 0 HM 0 0 0
1.5743 3.5817 1.2598 29900 7760 4420 38600
0.000 .000 .000 5 00 0. .5 00 0 .5 00 XAA 00 X Y 00 X
1.5748 2.6772 0.7480 11600 3000 1940 16100
0.000 5.000 .000 500 0. . 00 00 . 05000 XAA 0 Y 0
1.5748 2.9528 1.0236 18300 4750 2890 23600
0.000 . 00 0. 5 5 00 0. 0 . 5 00 0500 . 5 00 5 00X
1.5748 3.0000 0.8120 13200 3430 2360 15500
0.000 0.000 .000 00 0. . 0 00 0 . 00 A
1.5748 3.1496 0.8268 16600 4290 2010 18700
0.000 0.000 .00 5 00 0. 0 . 5 00 0500 . 5 00 5 5
1.5748 3.1496 0.8270 13200 3430 2360 15500
0.000 0.000 .00 5 00 0. 0 . 5 00 0500 . 5 00 5 5A
1.5748 3.1496 0.8270 13200 3430 2360 15500
0.000 . . 5 00 0. . 00 0 00 . 00 50 5 0
1.5748 3.3125 1.0625 17000 4420 2320 20000
0.000 5.000 0. 5 00 0. . 00 0 00 . 00 50 5 A
1.5748 3.3465 0.8125 17000 4420 2320 20000
0.000 5.000 0. 5 00 0. . 00 0 00 . 00 50 5 X
1.5748 3.3465 0.8125 17000 4420 2320 20000
0.000 5.000 0. 5 00 0. . 00 0 00 . 00 5 5 A
1.5748 3.3465 0.8125 17000 4420 2320 20000
0.000 5.000 .000 000 0. . 00 00 . 0 0000 JF 0 JF 0 0
1.5748 3.3465 1.2992 28500 7400 4360 35900
0.000 5. 5 0. 5000 0. 0 . 00 0500 . 5 000 0
1.5748 3.3750 1.1875 25900 6710 4610 33200
0.000 . 0. 05000 0. . 00 00 . 000 5 5 5
1.5748 3.4375 1.1875 23600 6120 3210 30100
0.000 .500 . 5 00 0. 0. 0 00 000 0. 5 00 5 X
1.5748 3.4843 0.9750 17500 4540 6070 19900
0.000 .500 . 0 000 0. . 00 500 . 000 0
1.5748 3.4843 1.0625 24100 6240 2820 28000
0.000 . 00 . 0 000 0. . 00 500 . 000 0 X
1.5748 3.5000 1.0625 24100 6240 2820 28000
0.000 0.000 .000 5 00 0. . 00 0 00 . 00 50 5 X
1.5748 3.5433 0.9055 17000 4420 2320 20000
0.000 0.000 5. 50 000 0.55 . 0 00 00 .0 0000 XBA 0 -B Y 0 -B
1.5748 3.5433 1.3878 27500 7140 6670 36100
0.000 0. .000 5 00 0. . 00 0 00 . 00 50 5
1.5748 3.5480 0.9055 17000 4420 2320 20000
0.000 0. .000 5 00 0. . 00 0 00 . 00 5 5
1.5748 3.5480 0.9055 17000 4420 2320 20000
0.000 0. .000 5 00 0. . 00 0 00 . 00 50A 5
1.5748 3.5480 0.9055 17000 4420 2320 20000
0.000 5. 50 . 000 0. . 0500 00 .05 000 -S
1.5748 3.7500 1.0938 26400 6850 3330 32400
0.000 0 . 50 .5 5 000 0. 0 .0 00 000 . 0 000 5 5 X
1.5748 4.2500 1.4375 35800 9290 4720 46200
0.000 0 . 50 .5 5 000 0. 0 .0 00 000 . 0 000 5 X 5 X
1.5748 4.2500 1.4375 35800 9290 4720 46200
B
Caption:
Caption:
C
D
B
d
a
B 0 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 50 5.50 - . . 5.0 .0 . .0 .0 . 0 . 0 0. .5 0.0 0 0.
0.7736 0.6105 -0.14 0.09 1.77 1.93 0.05 2.80 2.68 0.04 0.04
0.81
0. 0 5.50 - . .5 5.0 5 .0 . .0 .0 . 0 . 0 0. .5 0.0 0 0.
0.8244 0.6105 -0.19 0.14 1.77 2.05 0.05 2.80 2.68 0.09 0.04
0.83
. 50 5. 5 - . . 5.0 .0 .5 .0 .0 . 0 . 0 0. .5 0.0 0 0.
0.7736 0.6250 -0.14 0.09 1.77 1.93 0.06 2.87 2.72 0.04 0.04
0.95
.000 .500 - . .0 5 .0 5 .0 .5 .0 .0 .50 . 0 . . 0.0 5 .0
1.2598 1.0433 -0.38 0.04 2.09 2.13 0.14 3.39 3.11 0.06 0.07
2.26
.000 .500 - . .5 5.5 5 .0 .0 5.0 .0 0. 0 . 0 . . 0.0 0.
0.7480 0.5709 -0.15 0.14 1.79 2.05 0.04 2.56 2.40 0.04 0.07
0.61
.000 0.500 - . .5 .0 55.0 .5 .0 .0 . 0 . 0 . . 0.0 0.50
1.0236 0.8071 -0.30 0.14 1.85 2.17 0.06 2.80 2.64 0.07 0.07
1.09
0. 0 5. - . .5 5.0 .5 .5 .0 .0 . 0 . 0 0. .5 0.0 0 0.
0.8244 0.6100 -0.19 0.06 1.77 1.87 0.06 2.80 2.68 0.09 0.04
0.85
. 0 . - . 0. 5.5 .0 . 5.0 .0 0. 0 . 0 .5 0.0 0.
0.8820 0.7018 -0.25 0.03 1.79 1.81 0.05 2.95 2.87 0.03 0.04
1.05
0. 0 5. 5 - . .5 5.0 .5 .5 .0 .0 . 0 . 0 0. .5 0.0 0 0.
0.8244 0.6250 -0.19 0.06 1.77 1.87 0.06 2.87 2.72 0.09 0.04
0.98
0. 0 5. 5 - . .5 5.0 .5 .0 .0 .0 . 0 . 0 0. .5 0.0 0 0.
0.8244 0.6250 -0.19 0.06 1.77 1.87 0.08 2.87 2.72 0.09 0.04
0.97
. . - . .0 .5 5 .0 . .5 .0 0.50 . 0 0 . 0.0 0.
0.8540 0.9375 -0.19 0.16 1.83 2.13 0.13 3.13 2.91 0.02 0.07
1.36
. . - . .0 .5 5 .0 . 0.0 .0 0.50 . 0 0 . 0.0 0.5
0.8540 0.6875 -0.19 0.16 1.83 2.13 0.05 3.15 3.03 0.02 0.07
1.23
. . - . .0 .5 5 .0 .5 0.0 .0 0.50 . 0 0 . 0.0 0.5
0.8540 0.6875 -0.19 0.16 1.83 2.13 0.06 3.15 3.03 0.02 0.07
1.23
. . - . . .5 5 .0 . 0.0 .0 0.50 . 0 0 . 0.0 0.5
0.8540 0.6875 -0.19 0.09 1.83 2.01 0.05 3.15 3.03 0.02 0.07
1.24
.500 .000 - 0. .5 .0 55.0 .0 0.0 5.0 . 0 .00 .5 .5 0.0 0. 0
1.2795 1.1024 -0.40 0.10 1.93 2.17 0.08 3.15 2.95 0.04 0.08
1.99
0. . - . 0. 50.0 5 .0 . .0 .0 .50 . 0 . .5 0.0 0.
1.1875 0.9375 -0.32 0.03 1.97 2.01 0.13 3.19 2.87 0.06 0.08
1.81
0. . - 0. .5 .0 5 .0 . .0 5.0 . 0 0. 0 .5 0.5 0.0 0 0.
1.2160 0.9375 -0.40 0.14 1.85 2.09 0.13 3.19 2.95 0.09 0.03
1.84
.0 . .0 . 5 .0 5 .0 .5 .0 5.0 . 0 .00 . . 0.0 0.
0.9080 0.6875 0.12 0.09 2.00 2.20 0.06 3.31 2.95 0.13 0.12
1.50
.0 . 5 - . .5 .0 5 .0 .5 0.0 .0 . 0 0. 0 . . 0.0 0. 0
1.1450 0.8750 -0.38 0.14 1.81 2.05 0.06 3.15 3.03 0.05 0.03
1.76
.0 . 5 - . .5 .0 5 .0 0. 0.0 .0 . 0 0. 0 . . 0.0 0.
1.1450 0.8750 -0.38 0.14 1.81 2.05 0.03 3.15 3.07 0.05 0.03
1.78
. . 0 - . .0 .5 5 .0 . .0 .0 0.50 . 0 0 . 0.0 0.
0.8540 0.8586 -0.19 0.16 1.83 2.13 0.09 3.23 3.07 0.02 0.07
1.57
.500 .000 - . .0 .0 5 .0 .5 .0 .0 .50 . 0 . 0.0 . 0
1.3189 1.0630 -0.29 0.08 1.93 2.28 0.06 3.31 2.99 0.14 0.11
2.43
. . 0 - . .0 .5 5 .0 . .0 .0 0.50 . 0 0 . 0.0 0.
0.8540 0.8586 -0.19 0.16 1.83 2.13 0.09 3.23 3.07 0.02 0.07
1.58
. . 0 - . . .5 5 .0 . .0 .0 0.50 . 0 0 . 0.0 0.
0.8540 0.8586 -0.19 0.09 1.83 2.01 0.09 3.23 3.07 0.02 0.07
1.59
. . 0 - . 0. .5 .5 . .0 .0 0.50 . 0 0 . 0.0 0.
0.8540 0.8586 -0.19 0.03 1.83 1.87 0.09 3.23 3.07 0.02 0.07
1.59
. 00 . 5 - . .5 .0 5 .0 . .0 .0 . 0 0. 0 .5 . 0.0 05 .00
1.1772 0.8750 -0.36 0.14 1.85 2.13 0.09 3.43 3.27 0.06 0.02
2.21
. 5 .5 5 - . .5 50.0 5 .0 . 00.0 .0 . 0 0. 0 . . 0.0 . 5
1.4550 1.1250 -0.48 0.14 1.97 2.24 0.13 3.94 3.70 0.11 0.04
3.85
. 5 .5 5 - . .0 50.0 5 .0 . 00.0 .0 . 0 0. 0 . . 0.0 . 5
1.4550 1.1250 -0.48 0.12 1.97 2.20 0.13 3.94 3.70 0.11 0.04
3.85
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
0. .550 . 0 5 00 0.55 . 0 00 000 .0 0000 HM 0 HM 0 0
1.5938 3.2500 1.1563 21400 5540 5180 29300
0. . 5 .500 00 0. 5 . 000 0 . 500 LM 00 LM 00
1.6137 2.6762 0.6890 10400 2690 1600 14300
.000 .000 .000 5 00 0. .5 00 0 .5 00 XKA 00 XF Y 00 XZ
1.6142 2.6772 0.7480 11900 3090 2010 16800
. 5 . 5 .500 00 0. 5 . 000 0 . 500 LM 00 LM 00
1.6250 2.6762 0.6890 10400 2690 1600 14300
. 5 .0 5 . 000 0. 5 . 00 0 . 5 00 5 0 5 0
1.6250 2.8750 0.6562 10600 2740 1640 13100
. 5 . .55 5 00 0. 0 .50 5 00 0 00 . 00 LM50 A LM50 0
1.6250 2.8910 0.7700 13100 3410 2330 16700
. 5 . .55 5 00 0. 0 .50 5 00 0 00 . 00 LM50 LM50 0
1.6250 2.8910 0.7700 13100 3410 2330 16700
. 5 . . 0 5 00 0. 0 .50 5 00 0 00 . 00 LM50 LM50
1.6250 2.8910 0.8437 13100 3410 2330 16700
. 5 . .0 5 00 0. 0 .50 5 00 0 00 . 00 LM50 LM50
1.6250 2.8910 0.9060 13100 3410 2330 16700
. 5 . 00 .00 500 0. . 500 0 . 0 55 00 00
1.6250 3.0000 0.7090 10000 2600 2170 12400
. 5 . 00 .00 500 0. . 500 0 . 0 55 00 00
1.6250 3.0000 0.7090 10000 2600 2170 12400
. 5 . 00 . 5 00 0. .5 00 00 . 00 0 0
1.6250 3.0000 0.8750 15700 4080 2740 20100
. 5 . 00 . 5 00 0. .5 00 00 . 00 0
1.6250 3.0000 0.8750 15700 4080 2740 20100
. 5 . 00 . 5 00 0. .5 00 00 . 00 0
1.6250 3.0000 0.8750 15700 4080 2740 20100
. 5 . 00 5. 00 00 0. .5 00 00 . 00 0
1.6250 3.0000 1.0000 15700 4080 2740 20100
. 5 . 00 5. 00 00 0. .5 00 00 . 00
1.6250 3.0000 1.0000 15700 4080 2740 20100
. 5 . 5 . 00 0. . 00 00 . 0000
1.6250 3.1250 0.9375 19000 4920 2680 24800
. 5 . 5 . 00 0. . 00 00 . 0000 5
1.6250 3.1250 0.9375 19000 4920 2680 24800
. 5 0.000 .00 500 0. . 500 0 . 0 55 00 5
1.6250 3.1496 0.7090 10000 2600 2170 12400
. 5 0.000 .000 00 0. . 0 00 0 . 00
1.6250 3.1496 0.8268 16600 4290 2010 18700
. 5 0.000 .000 00 0. . 0 00 0 . 00
1.6250 3.1496 0.8268 16600 4290 2010 18700
. 5 0.0 5 . 0 0 000 0. . 0 00 00 . 000
1.6250 3.1510 1.1563 23900 6200 2900 29100
. 5 0. 5. 00 00 0. . 00 00 . 0000 0
1.6250 3.1562 1.0000 19000 4920 2680 24800
. 5 0. . 00 0. . 0 00 0 . 00 0
1.6250 3.1562 1.0625 16600 4290 2010 18700
. 5 0. . 00 0. . 0 00 0 . 00 0
1.6250 3.1562 1.0625 16600 4290 2010 18700
. 5 0. . 0 00 0. . 00 00 . 0000
1.6250 3.1562 1.1563 19000 4920 2680 24800
. 5 . 55 . 0 0 000 0. . 0 00 00 . 000
1.6250 3.2187 1.1563 23900 6200 2900 29100
. 5 .550 . 5 000 0. 0 . 00 5 00 . 5 5000
1.6250 3.2500 1.0313 19300 5010 3450 25800
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.5 5 .0 0 - . .5 .0 5 .0 . .0 .0 . 0 . 0 . 0.0 0.
1.1250 0.9063 -0.19 0.14 1.93 2.28 0.13 3.07 2.68 0.08 0.07
1.60
.000 .500 - . .5 5.5 5 .0 .5 5.0 .0 0. 0 . 0 .5 . 0.0 0.
0.7087 0.5315 -0.14 0.14 1.79 2.05 0.06 2.56 2.40 0.02 0.05
0.53
.000 .500 - . .0 .0 50.0 .0 5.0 .0 * * .5 0.5 0.0 0 0.
0.8268 0.5709 -0.15 0.08 1.81 1.97 0.04 2.56 2.40 * *
0.59
.000 .500 - . .5 5.5 5 .0 .5 5.0 .0 0. 0 . 0 .5 . 0.0 0.
0.7087 0.5315 -0.14 0.14 1.79 2.05 0.06 2.56 2.40 0.02 0.05
0.53
. . 00 - . .5 .0 5 .0 .5 .0 .0 0.50 . 0 5. 0.0 0.
0.6875 0.5000 -0.11 0.14 1.81 2.09 0.06 2.72 2.60 0.02 0.05
0.61
. . - . 0. .5 .0 0. 0.0 .0 .00 0. 0 . . 0.0 0.
0.7800 0.5800 -0.13 0.03 1.83 1.85 0.03 2.76 2.64 0.04 0.04
0.73
. . - . .5 .0 5 .0 0. 0.0 .0 .00 .00 . . 0.0 0.
0.7800 0.5800 -0.13 0.14 1.89 2.13 0.03 2.76 2.64 0.04 0.04
0.74
. . 0 - . .5 .0 5 .0 0. 0.0 5.0 .00 .00 . . 0.0 0.
0.7800 0.6537 -0.13 0.14 1.89 2.13 0.03 2.76 2.56 0.04 0.04
0.78
. . - . .5 .0 5 .0 . 0.0 .0 .00 .00 . . 0.0 0.
0.7800 0.7160 -0.13 0.14 1.89 2.13 0.09 2.76 2.52 0.04 0.04
0.81
. . -0. .5 .5 .0 .5 .0 .0 . 0 .50 . . 0.0 5 0.
0.6844 0.5625 -0.03 0.06 1.83 1.93 0.06 2.80 2.64 0.06 0.06
0.75
. . -0. 0. .5 .0 .5 .0 .0 * * . . 0.0 5 0.
0.6844 0.5625 -0.03 0.03 1.83 1.85 0.06 2.80 2.64 * *
0.75
.0 0 . - . .5 .0 5 .0 0. .0 .0 . 0 . 0 . .5 0.0 0.
0.9063 0.6875 -0.19 0.14 1.85 2.13 0.03 2.83 2.68 0.05 0.04
0.94
.0 0 . - . .5 .0 5 .0 . .0 .0 . 0 . 0 . .5 0.0 0.
0.9063 0.6875 -0.19 0.14 1.85 2.13 0.13 2.83 2.60 0.05 0.04
0.92
.0 0 . - . 0. .0 .0 0. .0 .0 . 0 . 0 . .5 0.0 0.
0.9063 0.6875 -0.19 0.03 1.85 1.89 0.03 2.83 2.68 0.05 0.04
0.95
.0 0 0. - . .5 .0 5 .0 . .0 .0 . 0 . 0 . .5 0.0 0.
0.9063 0.8125 -0.19 0.14 1.85 2.13 0.09 2.83 2.60 0.05 0.04
1.02
.0 0 0. - . 0. .0 .0 . .0 .0 . 0 . 0 . .5 0.0 0.
0.9063 0.8125 -0.19 0.03 1.85 1.89 0.09 2.83 2.60 0.05 0.04
1.03
5. 00 .050 - . .5 .0 5 .0 0. .0 .0 . 0 . 0 . . 0.0 0 0.5
1.0000 0.7500 -0.29 0.14 1.85 2.13 0.03 2.91 2.80 0.06 0.05
1.15
5. 00 .050 - . 0. .0 .0 0. .0 .0 . 0 . 0 . . 0.0 0 0.5
1.0000 0.7500 -0.29 0.03 1.85 1.89 0.03 2.91 2.80 0.06 0.05
1.17
. . -0. .5 .5 .0 .5 .0 .0 . 0 .50 . . 0.0 5 0.
0.6844 0.5625 -0.03 0.06 1.83 1.93 0.06 2.87 2.72 0.06 0.06
0.86
. 0 . - . 0. .0 .0 . 5.0 .0 0. 0 . 0 .5 0.0 0.
0.8820 0.7018 -0.25 0.03 1.81 1.85 0.05 2.95 2.87 0.03 0.04
1.02
. 0 . - . .5 .0 5 .0 . 5.0 .0 0. 0 . 0 .5 0.0 0.
0.8820 0.7018 -0.25 0.14 1.81 2.09 0.05 2.95 2.87 0.03 0.04
1.01
0. . - 0. .5 .0 5 .0 .5 .5 .0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.14 1.85 2.13 0.06 2.94 2.80 0.07 0.04
1.39
5. 00 0. - . .5 .0 5 .0 . .0 .0 . 0 . 0 . . 0.0 0 0.55
1.0000 0.8125 -0.29 0.14 1.85 2.13 0.13 2.91 2.72 0.06 0.05
1.21
. 0 . - . 0. .0 .0 . 5.0 0.0 0. 0 . 0 .5 0.0 0.5
0.8820 0.9375 -0.25 0.03 1.81 1.85 0.13 2.95 2.76 0.03 0.04
1.17
. 0 . - . .5 .0 5 .0 . 5.0 0.0 0. 0 . 0 .5 0.0 0.5
0.8820 0.9375 -0.25 0.14 1.81 2.09 0.13 2.95 2.76 0.03 0.04
1.15
5. 00 . 0 - . .5 .0 5 .0 . .0 .0 . 0 . 0 . . 0.0 0 0.
1.0000 0.9688 -0.29 0.14 1.85 2.13 0.13 2.91 2.68 0.06 0.05
1.35
0. . - 0. .5 .0 5 .0 . 5.0 .0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.14 1.85 2.13 0.13 2.95 2.80 0.07 0.04
1.46
. 0. - . .5 .0 55.0 0. .0 .0 . 0 . 0 . 5. 0.0 0.
1.0625 0.8125 -0.25 0.14 1.93 2.17 0.03 3.03 2.87 0.07 0.04
1.40
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 5 .550 .5 00 0.55 . 0 000 0 00 .0 000 M 0 0 M 0 0
1.6250 3.2500 1.0450 19100 4950 4620 25300
. 5 .550 .5 00 0.55 . 0 000 0 00 .0 000 M 0 0 M 0 0
1.6250 3.2500 1.0450 19100 4950 4620 25300
. 5 . . 0 0 000 0. . 0 00 00 . 000
1.6250 3.3125 1.1563 23900 6200 2900 29100
. 5 . 0. 05000 0. . 00 00 . 000 5 5 0
1.6250 3.3125 1.1875 23600 6120 3210 30100
. 5 . 0. 05000 0. . 00 00 . 000 5 5 0
1.6250 3.3125 1.1875 23600 6120 3210 30100
. 5 . 0. 05000 0. . 00 00 . 000 5 5 0
1.6250 3.3125 1.1875 23600 6120 3210 30100
. 5 5. 5 0. 5000 0. 0 . 00 0500 . 5 000 0
1.6250 3.3750 1.1875 25900 6710 4610 33200
. 5 5. 5 0. 5000 0. 0 . 00 0500 . 5 000
1.6250 3.3750 1.1875 25900 6710 4610 33200
. 5 5. 5 0. 5000 0. 0 . 00 0500 . 5 000 0 0
1.6250 3.3750 1.1875 25900 6710 4610 33200
. 5 5. 5 0. 5000 0. 0 . 00 0500 . 5 000 0
1.6250 3.3750 1.1875 25900 6710 4610 33200
. 5 5. 5 0. 5000 0. 0 . 00 0500 . 5 000 A 0
1.6250 3.3750 1.1875 25900 6710 4610 33200
. 5 . 0. 05000 0. . 00 00 . 000 5 5 5
1.6250 3.4375 1.1875 23600 6120 3210 30100
. 5 . 0. 05000 0. . 00 00 . 000 5 5 5
1.6250 3.4375 1.1875 23600 6120 3210 30100
. 5 . 0. 05000 0. . 00 00 . 000 5 5 5 5
1.6250 3.4375 1.1875 23600 6120 3210 30100
. 5 .500 5. 00 00 0. 0. 0 00 000 0. 5 00
1.6250 3.4843 1.0000 17500 4540 6070 19900
. 5 .500 . 0 000 0. . 00 500 . 000
1.6250 3.4843 1.0625 24100 6240 2820 28000
. 5 . 00 0. 500 0. . 0 00 00 . 5 00 5A A
1.6250 3.5000 0.8125 17900 4640 2540 21500
. 5 . 00 0. 05000 0.55 . 0 00 5500 .0 000 HM 0 5 HM 0 0
1.6250 3.5000 1.1875 23700 6140 5740 32400
. 5 . 00 0. 05000 0.55 . 0 00 5500 .0 000 HM 0 HM 0 0
1.6250 3.5000 1.1875 23700 6140 5740 32400
. 5 0.000 0.000 500 0. . 0 00 00 . 5 00 5A
1.6250 3.5433 0.7874 17900 4640 2540 21500
. 5 0. . 55000 0. . 0 00 00 .05 0 000 5
1.6250 3.5625 1.5625 34900 9040 4400 45900
. 5 .0 5 . 5 00 0. 0. 0500 00 0. 0 500 M 0 5 M 0 0
1.6250 3.6250 1.0313 17800 4620 6570 20800
. 5 .0 5 0. 05000 0.55 . 0 00 5500 .0 000 HM 0 5 HM 0
1.6250 3.6250 1.1875 23700 6140 5740 32400
. 5 .0 5 0. 05000 0.55 . 0 00 5500 .0 000 HM 0 HM 0
1.6250 3.6250 1.1875 23700 6140 5740 32400
. 5 . . 50 000 0. . 00 0 00 . 5 000
1.6250 3.6875 1.2500 28200 7320 4510 35000
. 5 5. 50 . 000 0. . 0500 00 .05 000
1.6250 3.7500 1.0938 26400 6850 3330 32400
. 5 5. 50 0. 5000 0.55 . 0 00 00 .0 5 000 HM 0 0 HM 0 0
1.6250 3.7500 1.1875 25900 6710 6280 35400
. 5 5. 50 0. 5 00 0. 0. 000 0500 0. 0 000 5 5 5
1.6250 3.7500 1.2188 20900 5410 6850 23400
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
5. 5 0. - .0 0. 50.5 5 .0 . .0 0.0 . 0 . 0 0. . 0.0 0.
1.0100 0.7950 -0.12 0.03 1.99 2.05 0.13 3.11 2.76 0.09 0.07
1.39
5. 5 0. - .0 .5 50.5 5 .0 . .0 0.0 . 0 . 0 0. . 0.0 0.
1.0100 0.7950 -0.12 0.14 1.99 2.24 0.13 3.11 2.76 0.09 0.07
1.37
0. . - 0. .5 .0 5 .0 . .0 .0 . 0 . 0 . . 0.0 0.
1.1965 0.9375 -0.43 0.14 1.85 2.13 0.13 2.99 2.83 0.07 0.04
1.58
0. . - 0. 0. .0 .0 . .5 .0 . 0 0. 0 .5 0.5 0.0 0 0.
1.2160 0.9375 -0.40 0.03 1.89 1.93 0.13 3.13 2.91 0.09 0.03
1.64
0. . - 0. 0. .0 .0 0. .5 .0 . 0 0. 0 .5 0.5 0.0 0 0. 5
1.2160 0.9375 -0.40 0.03 1.89 1.93 0.03 3.13 2.99 0.09 0.03
1.66
0. . - 0. .5 .0 5 .0 0. .5 .0 . 0 0. 0 .5 0.5 0.0 0 0. 5
1.2160 0.9375 -0.40 0.14 1.89 2.13 0.03 3.13 2.99 0.09 0.03
1.65
0. . - . .5 50.5 5 .0 . .0 .0 .50 . 0 . .5 0.0 0.
1.1875 0.9375 -0.32 0.14 1.98 2.24 0.13 3.19 2.87 0.06 0.08
1.75
0. . - . .5 50.5 5 .0 . .0 5.0 .50 . 0 . .5 0.0 0. 0
1.1875 0.9375 -0.32 0.14 1.98 2.24 0.05 3.19 2.95 0.06 0.08
1.77
0. . - . 0. 50.5 5 .0 . .0 .0 .50 . 0 . .5 0.0 0. 0
1.1875 0.9375 -0.32 0.03 1.98 2.05 0.13 3.19 2.87 0.06 0.08
1.77
0. . - . 0. 50.5 5 .0 . .0 5.0 .50 . 0 . .5 0.0 0.
1.1875 0.9375 -0.32 0.03 1.98 2.05 0.05 3.19 2.95 0.06 0.08
1.79
0. . - . . 50.5 55.0 . .0 .0 .50 . 0 . .5 0.0 0. 0
1.1875 0.9375 -0.32 0.09 1.98 2.17 0.13 3.19 2.87 0.06 0.08
1.76
0. . - 0. 0. .0 .0 . .0 5.0 . 0 0. 0 .5 0.5 0.0 0 0.
1.2160 0.9375 -0.40 0.03 1.89 1.93 0.13 3.19 2.95 0.09 0.03
1.81
0. . - 0. .5 .0 5 .0 . .0 5.0 . 0 0. 0 .5 0.5 0.0 0 0.
1.2160 0.9375 -0.40 0.14 1.89 2.13 0.13 3.19 2.95 0.09 0.03
1.80
0. . - 0. .5 .0 50.0 . .0 5.0 . 0 0. 0 .5 0.5 0.0 0 0.
1.2160 0.9375 -0.40 0.06 1.89 1.97 0.13 3.19 2.95 0.09 0.03
1.81
. . . . 5 .0 5 .0 .5 .0 5.0 . 0 . 0 . . 0.0 0.
0.9330 0.6875 0.09 0.09 2.00 2.24 0.06 3.31 2.95 0.15 0.10
1.48
.0 . 5 - . .5 .0 5 .0 .5 0.0 .0 . 0 0. 0 . . 0.0 0.
1.1450 0.8750 -0.38 0.14 1.85 2.13 0.06 3.15 3.03 0.05 0.03
1.71
. 5 .5 - . .5 .5 55.0 . .0 .0 0.50 .00 . 0.0 0.
0.8750 0.6501 -0.17 0.14 1.91 2.17 0.05 3.31 3.19 0.02 0.04
1.38
. 0 .0 0 - . 0. 5 .0 5 .0 . 5.0 .0 .50 . 0 . . 0.0 0. 0
1.1563 0.9063 -0.17 0.03 2.09 2.13 0.13 3.35 2.91 0.06 0.08
1.98
. 0 .0 0 - . .5 5 .0 0.0 . 5.0 .0 .50 . 0 . . 0.0 0.
1.1563 0.9063 -0.17 0.14 2.09 2.36 0.13 3.35 2.91 0.06 0.08
1.96
. 5 5. 5 - . .5 .5 55.0 .0 .0 .0 0.50 .00 . 0.0 0.
0.8750 0.6250 -0.17 0.14 1.91 2.17 0.08 3.31 3.19 0.02 0.04
1.40
0. . - 5.0 .5 5 .0 0.0 . 5.0 .0 . 0 0. 0 5 . . 0.0 .
1.5900 1.3125 -0.59 0.14 2.05 2.36 0.13 3.35 3.03 0.09 0.02
2.74
. . 0 . .5 5 .0 0.0 .5 .0 .0 . 0 . 0 5. . 0.0 0.
0.9375 0.6563 0.14 0.14 2.13 2.36 0.06 3.46 3.07 0.19 0.13
1.69
. 0 .0 0 - . 0. 5 .0 5 .0 . .0 .0 .50 . 0 . . 0.0 0.
1.1563 0.9063 -0.17 0.03 2.09 2.13 0.13 3.39 2.99 0.06 0.08
2.15
. 0 .0 0 - . .5 5 .0 0.0 . .0 .0 .50 . 0 . . 0.0 0.
1.1563 0.9063 -0.17 0.14 2.09 2.36 0.13 3.39 2.99 0.06 0.08
2.14
. 50 5. 00 - . .5 50.0 5 .0 . .0 .0 .00 0. 0 . . 0.0 .0
1.2500 1.0000 -0.36 0.14 1.97 2.24 0.13 3.43 3.23 0.12 0.03
2.27
. 00 . 5 - . .5 .5 55.0 . .0 .0 . 0 0. 0 .5 . 0.0 05 0.
1.1772 0.8750 -0.36 0.14 1.91 2.17 0.09 3.43 3.27 0.06 0.02
2.17
. 0 .0 0 - . .5 5 .0 .0 . .0 .0 . 0 . 0 . . 0. 0 .0
1.1563 0.9063 -0.15 0.14 2.13 2.40 0.13 3.58 3.19 0.09 0.11
2.35
. 0 0. -0. .5 5 .5 5 .0 0. .0 .0 5. 0 . 0 . . 0.0 0 0.
1.1142 0.8125 -0.01 0.06 2.07 2.24 0.03 3.50 3.19 0.22 0.08
2.15
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 5 5. 50 0. 5 0 000 0. 0. 00 5000 0. 000 HM 0 HM 0 0
1.6250 3.7500 1.2188 24000 6210 7870 29700
. 5 5. 50 0. 5 0 000 0. 0. 00 5000 0. 000 HM 0 5 HM 0 0
1.6250 3.7500 1.2188 24000 6210 7870 29700
. 5 5. 50 . 5 000 0. . 0500 00 .05 000 X
1.6250 3.7500 1.2501 26400 6850 3330 32400
. 5 . 5 0. 5 00 0. 0. 000 0500 0. 0 000 5 5
1.6250 3.8750 1.2188 20900 5410 6850 23400
. 5 . 5 0. 5 0 000 0. 0. 00 5000 0. 000 HM 0 HM 0
1.6250 3.8750 1.2188 24000 6210 7870 29700
. 5 0 . 00 . 5 5 000 0. . 0 500 00 .05 000 5 5
1.6250 4.0000 1.3750 34300 8880 4340 43000
. 5 0 . 5 .5 5 000 0. . 00 00 . 0 000 HM 0 0 5 HM 0 0 0
1.6250 4.1250 1.4375 35700 9260 7730 50200
. 5 0 . 50 . 000 0. . 00 00 . 000 5 A
1.6250 4.2500 1.0938 28200 7320 4200 37200
. 5 0 . 50 . 000 0. . 00 00 . 000 A 5 A
1.6250 4.2500 1.0938 28200 7320 4200 37200
. 5 0 . 50 .5 5 000 0. 0 .0 00 000 . 0 000 5 5 X
1.6250 4.2500 1.4375 35800 9290 4720 46200
.000 0.000 .00 500 0. . 500 0 . 0 55 00 5X 5
1.6535 3.1496 0.7090 10000 2600 2170 12400
. 50 0 . 5 0. 000 0. . 00 00 . 000 5 X
1.6870 4.1250 1.1875 28200 7320 4200 37200
. 50 0 . 50 . 5 000 0. . 00 00 . 000 5
1.6870 4.2500 1.0943 28200 7320 4200 37200
. 50 0.000 . 5 000 0. . 00 00 . 000 5
1.6870 4.3307 1.0943 28200 7320 4200 37200
. . . 5 00 0.5 . 00 0 00 . 5 5 00 0
1.6875 3.0312 0.6875 10300 2670 2320 13100
. .550 . 0500 0. . 5 00 500 . 00 5
1.6875 3.2500 0.7812 13600 3530 2600 16500
. .550 . 5 000 0. 0 . 00 5 00 . 5 5000 0 0
1.6875 3.2500 1.0313 19300 5010 3450 25800
. . . 00 0. . 00 500 . 000 55 55 0
1.6875 3.2650 0.9375 18800 4880 2800 24900
. . . 00 0. . 00 500 . 000 55 55
1.6875 3.2650 1.0625 18800 4880 2800 24900
. .05 . 00 0. . 00 500 . 000 55 55
1.6875 3.2700 0.9375 18800 4880 2800 24900
. .05 . 00 0. . 00 500 . 000 55 55
1.6875 3.2700 0.9400 18800 4880 2800 24900
. . 0. 05000 0. . 00 00 . 000 5 5 5
1.6875 3.4375 1.1875 23600 6120 3210 30100
. . 00 . 50 0 000 0. . 5 00 500 . 5 000 5 5 0
1.6875 4.5000 1.7500 46500 12100 8880 57500
. 5 . 00 5. 00 00 0. . 00 00 . 0000
1.6880 3.0000 1.0000 19000 4920 2680 24800
. 5 . 5 . 00 0. . 00 00 . 0000
1.6880 3.1250 0.9375 19000 4920 2680 24800
. 5 0.000 .000 00 0. . 0 00 0 . 00 -S
1.6880 3.1496 0.8268 16600 4290 2010 18700
. 5 0.000 . 00 0. . 00 00 . 0000
1.6880 3.1496 0.9375 19000 4920 2680 24800
. 5 0.000 . 00 0. . 0 00 0 . 00 -S A
1.6880 3.1496 0.9518 16600 4290 2010 18700
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 00 . 5 0.5 .5 5 .0 5 .0 0. .0 .0 . 0 . 0 . . 0. 0 0 .0
1.1142 0.8750 0.02 0.06 2.13 2.32 0.03 3.58 3.19 0.16 0.09
2.30
.5 5 . 5 0.5 .5 5 .0 .0 0. .0 .0 . 0 .00 . . 0. 0 0 .0
1.1250 0.8750 0.02 0.14 2.13 2.48 0.03 3.58 3.19 0.16 0.08
2.30
. 00 . 5 - . .5 .5 55.0 . .0 .0 . 0 0. 0 .5 . 0.0 05 .0
1.1772 1.0313 -0.36 0.14 1.91 2.17 0.13 3.43 3.19 0.06 0.02
2.35
. 0 0. -0. .5 5 .5 5 .0 0. .0 .0 5. 0 . 0 . . 0.0 0 .05
1.1142 0.8125 -0.01 0.06 2.07 2.24 0.03 3.58 3.23 0.22 0.08
2.33
. 00 . 5 0.5 .5 5 .0 5 .0 0. .0 .0 . 0 . 0 . . 0. 0 0 .
1.1142 0.8750 0.02 0.06 2.13 2.32 0.03 3.62 3.23 0.16 0.09
2.48
.0 . - . .5 50.0 5 .0 . 5.0 .0 . 0 . 0 5 . . 0.0 .
1.4200 1.0625 -0.50 0.14 1.97 2.24 0.13 3.74 3.50 0.11 0.07
3.14
.5 .5 5 - . .5 5 .0 0.0 . 00.0 .0 . 0 . 0 . . 0.0 0 .
1.4375 1.1250 -0.29 0.06 2.24 2.36 0.13 3.94 3.50 0.14 0.08
3.66
. . 5 - . . 5 .0 5 .0 0. 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 0.8750 -0.28 0.09 2.05 2.20 0.03 3.94 3.82 0.09 0.05
3.06
. . 5 - . .5 5 .0 5 .0 0. 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 0.8750 -0.28 0.06 2.05 2.13 0.03 3.94 3.82 0.09 0.05
3.06
. 5 .5 5 - . .5 5 .0 5 .0 . 00.0 .0 . 0 0. 0 . . 0.0 .
1.4550 1.1250 -0.48 0.14 2.01 2.28 0.13 3.94 3.70 0.11 0.04
3.80
. . -0. . .0 50.0 .5 .0 .0 * * . . 0.0 5 0.
0.6844 0.5625 -0.03 0.07 1.85 1.97 0.06 2.87 2.72 * *
0.84
. . 05 - . 0. 5 .0 5 .0 . .0 .0 . 0 . 0 5 . . 0.0 .
1.1542 0.9687 -0.28 0.03 2.09 2.13 0.13 3.86 3.62 0.09 0.05
2.89
. .000 - . 0. 5 .0 5 .0 0. 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 1.0630 -0.28 0.03 2.09 2.13 0.03 3.94 3.82 0.09 0.05
3.13
. .000 - . 0. 5 .0 5 .0 .0 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 1.0630 -0.28 0.03 2.09 2.13 0.08 3.94 3.78 0.09 0.05
3.29
. 5 . 0 0.0 .5 .5 5 .0 .5 .0 .0 . 0 . 0 5. 0.0 0.
0.6750 0.4688 0.00 0.06 1.91 2.01 0.06 2.87 2.68 0.06 0.09
0.71
. 5.0 0 - .5 . .5 5 .0 .5 .0 .0 . 0 . 0 . . 0.0 5 0.
0.7810 0.5937 -0.10 0.09 1.91 2.05 0.06 2.99 2.87 0.05 0.07
0.98
. 0. - . .5 50.0 5 .0 . .0 .0 . 0 . 0 . 5. 0.0 0. 0
1.0625 0.8125 -0.25 0.14 1.97 2.20 0.13 3.03 2.80 0.07 0.04
1.32
5. 00 .050 - . . .5 5 .0 0. .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7500 -0.25 0.09 1.95 2.09 0.03 3.03 2.91 0.04 0.03
1.28
5. 00 . 5 - . . .5 5 .0 . .0 .0 .00 0. 0 5. . 0.0 0 0.
1.0000 0.8750 -0.25 0.09 1.95 2.09 0.09 3.03 2.83 0.04 0.03
1.37
5. 00 .050 - . .5 .0 55.0 . .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7500 -0.25 0.14 1.93 2.17 0.13 3.03 2.83 0.04 0.03
1.26
5. 00 . - . . .5 5 .0 .0 .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7525 -0.25 0.09 1.95 2.09 0.08 3.03 2.87 0.04 0.03
1.28
0. . - 0. .5 .5 5 .0 . .0 5.0 . 0 0. 0 .5 0.5 0.0 0 0.
1.2160 0.9375 -0.40 0.14 1.95 2.20 0.13 3.19 2.95 0.09 0.03
1.74
. 50 . 5 - . .0 0.0 .0 . 0 .0 .0 . 0 .00 . 0. 05 . 5
1.7500 1.3750 -0.49 0.08 2.36 2.48 0.13 4.21 3.82 0.14 0.04
5.17
5. 00 0. - . .5 .5 55.0 .5 .0 .0 . 0 . 0 . . 0.0 0 0.
1.0000 0.8125 -0.29 0.14 1.91 2.17 0.06 2.87 2.72 0.06 0.05
1.01
5. 00 .050 - . .5 .5 55.0 0. .0 .0 . 0 . 0 . . 0.0 0 0.50
1.0000 0.7500 -0.29 0.14 1.91 2.17 0.03 2.91 2.80 0.06 0.05
1.11
. 0 . - . .5 .5 5 .0 . 5.0 .0 0. 0 . 0 .5 0.0 0.
0.8820 0.7018 -0.25 0.14 1.87 2.13 0.05 2.95 2.87 0.03 0.04
0.97
5. 00 .050 - . .5 .5 55.0 . .0 0.0 . 0 . 0 . . 0.0 0 0.5
1.0000 0.7500 -0.29 0.14 1.91 2.17 0.05 2.91 2.76 0.06 0.05
1.13
. 0 .000 - . .5 .5 5 .0 . 5.0 .0 0. 0 . 0 .5 0.0 0.
0.8820 0.8268 -0.25 0.14 1.87 2.13 0.09 2.95 2.80 0.03 0.04
1.04
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 5 0. 5. 00 00 0. . 00 00 . 0000
0
0
55 55
55 55
55 55 0
55 55
55 55
0
LL 0 0 LL 0 0 0
L 0 L 0 0
5 0
5 0
5
55 0 55
55 55
55 55
5 5 5
5 5
55 0 55 0
55 0 55
55 55 0
55 55 0
55 0 55
55 55 0
55 55
55 0 55
1.6880 3.1562 1.0000 19000 4920 2680 24800
. 5 0. 5. 00 00 0. . 00 00 . 0000
B
Caption:
1.6880 3.1562 1.0000 19000 4920 2680 24800
. 5 . . 00 0. . 00 500 . 000
1.6880 3.2273 0.9400 18800 4880 2800 24900
. 5 .550 . 00 0. . 00 500 . 000
1.6880 3.2500 0.9375 18800 4880 2800 24900
. 5 . . 00 0. . 00 500 . 000
1.6880 3.2650 0.9375 18800 4880 2800 24900
. 5 . . 00 0. . 00 500 . 000
Caption:
1.6880 3.2650 1.0625 18800 4880 2800 24900
. 5 .05 . 00 0. . 00 500 . 000
1.6880 3.2700 0.9400 18800 4880 2800 24900
. . . 55 00 0. . 5 00 0 00 . 500
1.6924 2.9523 0.7625 12400 3210 2440 16500
. . 5 0. 00 0. . 500 0 00 . 0 00
T
C
1.6924 3.1250 0.8125 14300 3720 2330 18700
. . 5 . 00 0. . 500 0 00 . 0 00
1.6924 3.1490 0.7812 14300 3720 2330 18700
. 50 . . 00 00 0. . 0 5 0 . 00
D
1.7500 2.8125 0.5000 7510 1950 1020 9790
. 50 .0 5 . 5 5 00 0. . 00 0 . 00
B
d
1.7500 2.8750 0.7188 11900 3080 1680 17600
. 50 . . 5 00 0.5 . 00 0 00 . 5 5 00
1.7500 3.0312 0.6875 10300 2670 2320 13100
. 50 . 5 . 00 0. . 0 500 0 .5 00
a
1.7500 3.1250 0.6875 10800 2810 1800 13800
. 50 0. .050 000 0.5 . 00 000 . 00
1.7500 3.1875 0.7500 10600 2740 2480 13700
. 50 .550 . 00 0. . 00 500 . 000
1.7500 3.2500 0.9375 18800 4880 2800 24900
. 50 .550 . 00 0. . 00 500 . 000
1.7500 3.2500 0.9375 18800 4880 2800 24900
. 50 .550 . 0 00 0. . 00 500 . 000
1.7500 3.2500 1.3500 18800 4880 2800 24900
. 50 . . 5 00 0. 0 .0 00 0 00 . 00
1.7500 3.2650 0.8750 17200 4470 2270 20100
. 50 . . 5 00 0. 0 .0 00 0 00 . 00
1.7500 3.2650 0.8750 17200 4470 2270 20100
. 50 . . 00 0. . 00 500 . 000
1.7500 3.2650 0.9375 18800 4880 2800 24900
. 50 . . 00 0. . 00 500 . 000
1.7500 3.2650 0.9375 18800 4880 2800 24900
. 50 . . 00 0. . 00 500 . 000
1.7500 3.2650 0.9375 18800 4880 2800 24900
. 50 . . 00 0. . 00 500 . 000
1.7500 3.2650 0.9375 18800 4880 2800 24900
. 50 . . 00 0. . 00 500 . 000
1.7500 3.2650 1.0625 18800 4880 2800 24900
. 50 . . 0 00 0. . 00 500 . 000
1.7500 3.2650 1.3500 18800 4880 2800 24900
. 50 . . 0 00 0. . 00 500 . 000
1.7500 3.2650 1.3500 18800 4880 2800 24900
. 50 .05 . 00 0. . 00 500 . 000
1.7500 3.2700 0.9375 18800 4880 2800 24900
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
5. 00 0. - . .5 .5 5 .0 . .0 .0 . 0 . 0 . . 0.0 0 0.5
1.0000 0.8125 -0.29 0.06 1.91 2.01 0.13 2.91 2.72 0.06 0.05
1.18
5. 00 0. - . .5 .5 5 .0 0. .0 .0 . 0 . 0 . . 0.0 0 0.5
1.0000 0.8125 -0.29 0.06 1.91 2.01 0.03 2.91 2.80 0.06 0.05
1.20
5. 00 . - . .5 .0 55.0 .0 .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7525 -0.25 0.14 1.93 2.17 0.04 3.03 2.91 0.04 0.03
1.23
5. 00 .050 - . .5 .0 55.0 .0 .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7500 -0.25 0.14 1.93 2.17 0.08 3.03 2.87 0.04 0.03
1.25
5. 00 .050 - . .5 .0 55.0 0. .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7500 -0.25 0.14 1.93 2.17 0.03 3.03 2.91 0.04 0.03
1.27
5. 00 . 5 - . .5 .0 55.0 . .0 .0 .00 0. 0 5. . 0.0 0 0.
1.0000 0.8750 -0.25 0.14 1.93 2.17 0.09 3.03 2.83 0.04 0.03
1.37
5. 00 . - . .5 .0 55.0 .0 .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7525 -0.25 0.14 1.93 2.17 0.08 3.03 2.87 0.04 0.03
1.27
. . - .0 .5 .5 5 .0 . .0 .0 * * 5. . 0.0 0.
0.7810 0.5625 -0.08 0.06 1.91 2.01 0.05 2.80 2.68 * *
0.79
0. 5. 5 - . .5 .0 5 .0 .0 5.0 .0 . 0 . 0 . . 0.0 0 0.
0.8125 0.6250 -0.15 0.06 1.93 2.01 0.08 2.95 2.80 0.04 0.05
0.94
0. 5.0 0 - . .5 .0 5 .0 . 5.0 .0 . 0 . 0 . . 0.0 0 0.
0.8125 0.5937 -0.15 0.06 1.93 2.01 0.05 2.95 2.83 0.04 0.05
0.94
. 00 .5 5 - . .5 .5 5 .0 .5 .0 5.0 0. 0 .50 0 . 0.0 0.
0.5000 0.3750 -0.05 0.06 1.91 2.01 0.06 2.68 2.56 0.00 0.06
0.40
. 5 5.0 - . .5 .0 5 .0 .5 .0 .0 0.00 . 0 0. . 0.0 5 0. 0
0.7188 0.5938 -0.15 0.06 1.93 2.01 0.06 2.72 2.60 0.00 0.07
0.65
. 5 . 0 0.0 .5 .5 5 .0 .5 .0 .0 . 0 . 0 5. 0.0 0.
0.6750 0.4688 0.00 0.06 1.95 2.05 0.06 2.87 2.68 0.06 0.09
0.68
. . 5 - .0 . .5 5 .0 .5 .0 .0 0. 0 .50 . . 0.0 5 0. 5
0.6875 0.5313 -0.08 0.11 1.95 2.13 0.06 2.91 2.80 0.03 0.06
0.76
. . 0. 0. 50.0 50.0 .5 .0 .0 . 0 . 0 5. 0.0 0.
0.6875 0.5625 0.03 0.01 1.97 1.97 0.06 2.99 2.83 0.06 0.08
0.86
5. 00 .050 - . .5 50.0 5 .0 .0 .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7500 -0.25 0.14 1.97 2.24 0.08 3.03 2.87 0.04 0.03
1.20
5. 00 .050 - . 5.0 50.0 0.0 .0 .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7500 -0.25 0.20 1.97 2.36 0.08 3.03 2.87 0.04 0.03
1.18
5. .050 - . . 50.0 5.0 .0 .0 .0 .50 0. 0 5. . 0.0 0 0.
1.4125 0.7500 -0.66 0.15 1.97 2.56 0.08 3.03 2.87 0.45 0.03
1.46
.0 . - . .5 .5 5 .0 0. .0 .0 . 0 . 0 . 0.0 0.
0.9060 0.6875 -0.24 0.14 1.95 2.20 0.03 3.07 2.99 0.05 0.04
1.07
.0 . - . 0. .5 50.0 0. .0 .0 . 0 . 0 . 0.0 0.
0.9060 0.6875 -0.24 0.03 1.95 1.97 0.03 3.07 2.99 0.05 0.04
1.09
5. 00 .050 - . .5 50.0 5 .0 0. .0 .0 .00 0. 0 5. . 0.0 0 0.55
1.0000 0.7500 -0.25 0.14 1.97 2.24 0.03 3.03 2.91 0.04 0.03
1.22
5. 00 .050 - . .5 50.0 5 .0 . .0 .0 .00 0. 0 5. . 0.0 0 0.55
1.0000 0.7500 -0.25 0.14 1.97 2.24 0.09 3.03 2.87 0.04 0.03
1.21
5. 00 .050 - . 0.5 50.0 5 .0 0. .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7500 -0.25 0.02 1.97 2.01 0.03 3.03 2.91 0.04 0.03
1.24
5. 00 .050 - . 5.0 50.0 0.0 0. .0 .0 .00 0. 0 5. . 0.0 0 0.55
1.0000 0.7500 -0.25 0.20 1.97 2.36 0.03 3.03 2.91 0.04 0.03
1.21
5. 00 . 5 - . .5 50.0 5 .0 . .0 .0 .00 0. 0 5. . 0.0 0 0. 0
1.0000 0.8750 -0.25 0.14 1.97 2.24 0.09 3.03 2.83 0.04 0.03
1.32
5. .050 - . . 50.0 5.0 0. .0 .0 .50 0. 0 5. . 0.0 0 0.
1.4125 0.7500 -0.66 0.15 1.97 2.56 0.03 3.03 2.91 0.45 0.03
1.49
5. .050 - . . 50.0 5.0 . .0 .0 .50 0. 0 5. . 0.0 0 0.
1.4125 0.7500 -0.66 0.15 1.97 2.56 0.09 3.03 2.87 0.45 0.03
1.48
5. 00 .050 - . .5 50.0 5 .0 . .0 .0 .00 0. 0 5. . 0.0 0 0.55
1.0000 0.7500 -0.25 0.14 1.97 2.24 0.13 3.03 2.83 0.04 0.03
1.21
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 50 .05 . 00 0. . 00 500 . 000 55 55
1.7500 3.2700 0.9375 18800 4880 2800 24900
. 50 .05 . 00 0. . 00 500 . 000 55 55
1.7500 3.2700 0.9375 18800 4880 2800 24900
. 50 .05 . 00 0. . 00 500 . 000 55 0 55
1.7500 3.2700 0.9400 18800 4880 2800 24900
. 50 . . 5 00 0. . 00 0 00 . 00 55 5 0
1.7500 3.3125 1.0625 17000 4420 2320 20000
. 50 . 0. 05000 0. . 00 00 . 000 5 5 0
1.7500 3.3125 1.1875 23600 6120 3210 30100
. 50 5.000 0. 5 00 0. . 00 0 00 . 00 55 5 A
1.7500 3.3465 0.8125 17000 4420 2320 20000
. 50 5.000 0. 5 00 0. . 00 0 00 . 00 55A 5 A
1.7500 3.3465 0.8125 17000 4420 2320 20000
. 50 5.000 0. 5 00 0. . 00 0 00 . 00 55X 5 A
1.7500 3.3465 0.8125 17000 4420 2320 20000
. 50 5.000 . 00 0. . 00 500 . 000 55 0 55
1.7500 3.3465 0.9375 18800 4880 2800 24900
. 50 5.000 5. 00 00 0. 5 . 00 00 . 000 5
1.7500 3.3465 1.0000 19400 5040 2980 26200
. 50 . . 5 00 0. . 00 0 00 . 00 55 5 5
1.7500 3.4375 1.0625 17000 4420 2320 20000
. 50 . . 00 0. 5 . 00 00 . 000 5 5
1.7500 3.4375 1.0625 19400 5040 2980 26200
. 50 . 0. 05000 0. . 00 00 . 000 5 5 5
1.7500 3.4375 1.1875 23600 6120 3210 30100
. 50 . 0. 05000 0. . 00 00 . 000 5 5
1.7500 3.4375 1.1875 23600 6120 3210 30100
. 50 . 0. 05000 0. . 00 00 . 000 5 A 5 5
1.7500 3.4375 1.1875 23600 6120 3210 30100
. 50 . 00 0. 05000 0.55 . 0 00 5500 .0 000 HM 0 HM 0 0
1.7500 3.5000 1.1875 23700 6140 5740 32400
. 50 . 00 0. 05000 0.55 . 0 00 5500 .0 000 HM 0 HM 0
1.7500 3.5000 1.1875 23700 6140 5740 32400
. 50 0. .000 5 00 0. . 00 0 00 . 00 55X 5
1.7500 3.5480 0.9055 17000 4420 2320 20000
. 50 . 0. 000 0. . 00 000 . 5 000 0
1.7500 3.6718 1.1875 25400 6590 3820 34300
. 50 . . 50 0000 0. 0 . 000 00 . 5 5 000 5
1.7500 3.6875 1.2500 26900 6980 4800 35500
. 50 . . 50 0000 0. 0 . 000 00 . 5 5 000
1.7500 3.6875 1.2500 26900 6980 4800 35500
. 50 . . 50 000 0. . 00 0 00 . 5 000 5
1.7500 3.6875 1.2500 28200 7320 4510 35000
. 50 . . 50 000 0. . 00 0 00 . 5 000
1.7500 3.6875 1.2500 28200 7320 4510 35000
. 50 5. 50 . 000 0. . 0500 00 .05 000 5
1.7500 3.7500 1.0938 26400 6850 3330 32400
. 50 5. 50 . 000 0. . 0500 00 .05 000
1.7500 3.7500 1.0938 26400 6850 3330 32400
. 50 5. 50 . 0000 0. . 00 00 . 000 5
1.7500 3.7500 1.0938 27000 7000 3950 36200
. 50 5. 50 . 0000 0. . 00 00 . 000 5
1.7500 3.7500 1.0938 27000 7000 3950 36200
. 50 5. 50 . 000 0. . 0500 00 .05 000 A
1.7500 3.7500 1.0938 26400 6850 3330 32400
B
Caption:
Caption:
C
D
B
d
a
B 0 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
5. 00 .050 - . 0.5 50.0 5 .0 . .0 .0 .00 0. 0 5. . 0.0 0 0.55
1.0000 0.7500 -0.25 0.02 1.97 2.01 0.13 3.03 2.83 0.04 0.03
1.22
5. 00 .050 - . 5.0 50.0 0.0 . .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7500 -0.25 0.20 1.97 2.36 0.13 3.03 2.83 0.04 0.03
1.19
5. 00 . - . .5 50.0 5 .0 .0 .0 .0 .00 0. 0 5. . 0.0 0 0.55
1.0000 0.7525 -0.25 0.14 1.97 2.24 0.08 3.03 2.87 0.04 0.03
1.22
. . - . . 50.0 5 .0 . .5 .0 0.50 . 0 0 . 0.0 0.5
0.8540 0.9375 -0.19 0.09 1.97 2.13 0.13 3.13 2.91 0.02 0.07
1.26
0. . - 0. .5 5 .0 5 .0 . .5 .0 . 0 0. 0 .5 0.5 0.0 0 0.
1.2160 0.9375 -0.40 0.14 2.01 2.24 0.13 3.13 2.91 0.09 0.03
1.51
. . - . . 50.0 5 .0 . 0.0 .0 0.50 . 0 0 . 0.0 0.5
0.8540 0.6875 -0.19 0.09 1.97 2.13 0.05 3.15 3.03 0.02 0.07
1.13
. . - . 0. 50.0 5 .0 . 0.0 .0 0.50 . 0 0 . 0.0 0.5
0.8540 0.6875 -0.19 0.03 1.97 2.01 0.05 3.15 3.03 0.02 0.07
1.14
. . - . .5 50.0 5 .0 . 0.0 .0 0.50 . 0 0 . 0.0 0.5
0.8540 0.6875 -0.19 0.14 1.97 2.20 0.05 3.15 3.03 0.02 0.07
1.12
5. 00 .050 - . .5 50.0 5 .0 . .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7500 -0.25 0.14 1.97 2.24 0.09 3.07 2.91 0.04 0.03
1.30
5. 0 0. - . .5 5 .0 5 .0 . 0.0 .0 . 0 . 0 . 5. 0.0 0.
1.0082 0.8125 -0.25 0.14 2.01 2.24 0.05 3.15 2.99 0.07 0.04
1.39
. . - . . 50.0 5 .0 . .0 5.0 0.50 . 0 0 . 0.0 0. 5
0.8540 0.9375 -0.19 0.09 1.97 2.13 0.13 3.19 2.95 0.02 0.07
1.43
5. 0 . 5 - . .5 5 .0 5 .0 . .0 5.0 . 0 . 0 . 5. 0.0 0. 0
1.0082 0.8750 -0.25 0.14 2.01 2.24 0.09 3.19 2.95 0.07 0.04
1.55
0. . - 0. .5 5 .0 5 .0 . .0 5.0 . 0 0. 0 .5 0.5 0.0 0 0.
1.2160 0.9375 -0.40 0.14 2.01 2.24 0.13 3.19 2.95 0.09 0.03
1.68
0. . - 0. .5 5 .0 5 .0 0. .0 .0 . 0 0. 0 .5 0.5 0.0 0 0.
1.2160 0.9375 -0.40 0.14 2.01 2.24 0.03 3.19 3.03 0.09 0.03
1.71
0. . - 0. 5.5 5 .0 .0 . .0 5.0 . 0 0. 0 .5 0.5 0.0 0 0. 5
1.2160 0.9375 -0.40 0.22 2.01 2.40 0.13 3.19 2.95 0.09 0.03
1.66
. 0 .0 0 - . .5 5 .5 .0 . 5.0 .0 .50 . 0 . . 0.0 0.
1.1563 0.9063 -0.17 0.14 2.10 2.44 0.13 3.35 2.91 0.06 0.08
1.85
. 0 .0 0 - . .5 5 .5 .0 0. 5.0 .0 .50 . 0 . . 0.0 0. 5
1.1563 0.9063 -0.17 0.14 2.10 2.44 0.03 3.35 2.99 0.06 0.08
1.88
. . 0 - . .5 50.0 5 .0 . .0 .0 0.50 . 0 0 . 0.0 0.
0.8540 0.8586 -0.19 0.14 1.97 2.20 0.09 3.23 3.07 0.02 0.07
1.47
0. 0 . - . .5 5 .0 5 .0 . .0 .0 . 0 0. 0 . .5 0.0 0 0.
1.1930 0.9375 -0.32 0.14 2.05 2.28 0.13 3.46 3.23 0.07 0.04
2.11
. 50 . 5 - . 0. 5 .0 55.0 . .0 .0 . 0 . 0 . . 0.0 0 .0
1.2500 1.0313 -0.31 0.03 2.13 2.17 0.13 3.43 3.11 0.08 0.04
2.25
. 50 . 5 - . .5 5 .0 0.0 . .0 .0 . 0 . 0 . . 0.0 0 .0
1.2500 1.0313 -0.31 0.14 2.13 2.36 0.13 3.43 3.11 0.08 0.04
2.24
. 50 5. 00 - . .5 5 .0 5 .0 . .0 .0 .00 0. 0 . . 0.0 0.
1.2500 1.0000 -0.36 0.14 2.09 2.32 0.13 3.43 3.23 0.12 0.03
2.15
. 50 5. 00 - . 0. 5 .0 5 .0 . .0 .0 .00 0. 0 . . 0.0 0.
1.2500 1.0000 -0.36 0.03 2.09 2.13 0.13 3.43 3.23 0.12 0.03
2.16
. 00 . 5 - . 0. 5 .0 5 .0 . .0 .0 . 0 0. 0 .5 . 0.0 05 0.
1.1772 0.8750 -0.36 0.03 2.01 2.05 0.09 3.43 3.27 0.06 0.02
2.07
. 00 . 5 - . .5 5 .0 5 .0 . .0 .0 . 0 0. 0 .5 . 0.0 05 0.
1.1772 0.8750 -0.36 0.14 2.01 2.24 0.09 3.43 3.27 0.06 0.02
2.06
.5 5 . 5 - . 0. 5 .0 5 .0 . 0.0 5.0 . 0 . 0 5 .5 .5 0.0 0 0.
1.1250 0.8750 -0.30 0.03 2.09 2.09 0.09 3.54 3.35 0.05 0.09
2.12
.5 5 . 5 - . 0. 5 .0 5 .0 0. 0.0 .0 . 0 . 0 5 .5 .5 0.0 0 0.
1.1250 0.8750 -0.30 0.03 2.09 2.09 0.03 3.54 3.39 0.05 0.09
2.13
. 00 . 5 - . .5 5 .0 5 .0 0. .0 .0 . 0 0. 0 .5 . 0.0 05 0.
1.1772 0.8750 -0.36 0.14 2.01 2.24 0.03 3.43 3.31 0.06 0.02
2.07
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 50 5. 50 0. 000 0. . 00 000 . 5 000
1.7500 3.7500 1.1875 25400 6590 3820 34300
. 50 5. 50 0. 5000 0.55 . 0 00 00 .0 5 000 HM 0 HM 0 0
1.7500 3.7500 1.1875 25900 6710 6280 35400
. 50 5. 50 0. 5000 0.55 . 0 00 00 .0 5 000 HM 0 HM 0
1.7500 3.7500 1.1875 25900 6710 6280 35400
. 50 5. 50 0. 5000 0.55 . 0 00 00 .0 5 000 HM 0 HM 0 0
1.7500 3.7500 1.1875 25900 6710 6280 35400
. 50 5. 50 0. 5 00 0. 0. 000 0500 0. 0 000 5 5 5
1.7500 3.7500 1.2188 20900 5410 6850 23400
. 50 5. 50 0. 5 00 0. 0. 000 0500 0. 0 000 5 5
1.7500 3.7500 1.2188 20900 5410 6850 23400
. 50 5. 50 0. 5 00 0. 0. 000 0500 0. 0 000 5 5 5
1.7500 3.7500 1.2188 20900 5410 6850 23400
. 50 5. 50 0. 5 00 0. 0. 000 0500 0. 0 000 5 5 5
1.7500 3.7500 1.2188 20900 5410 6850 23400
. 50 5. 50 0. 5 0 000 0. 0. 00 5000 0. 000 HM 0 HM 0 0
1.7500 3.7500 1.2188 24000 6210 7870 29700
. 50 5. 50 0. 5 0 000 0. 0. 00 5000 0. 000 HM 0 A HM 0 0
1.7500 3.7500 1.2188 24000 6210 7870 29700
. 50 5. 50 0. 5 0 000 0. 0. 00 5000 0. 000 HM 0 HM 0 0
1.7500 3.7500 1.2188 24000 6210 7870 29700
. 50 . .000 00 0. 5 . 00 00 . 5 0 000 AS A
1.7500 3.8125 0.8268 18900 4910 2980 24100
. 50 . 5 0. 000 0. . 00 000 . 5 000
1.7500 3.8750 1.1875 25400 6590 3820 34300
. 50 . 5 0. 5 00 0. 0. 000 0500 0. 0 000 5 5
1.7500 3.8750 1.2188 20900 5410 6850 23400
. 50 . 5 0. 5 00 0. 0. 000 0500 0. 0 000 5 5
1.7500 3.8750 1.2188 20900 5410 6850 23400
. 50 . 5 0. 5 00 0. 0. 000 0500 0. 0 000 5 5 X
1.7500 3.8750 1.2188 20900 5410 6850 23400
. 50 . 5 0. 5 00 0. 0. 000 0500 0. 0 000 5 5 X
1.7500 3.8750 1.2188 20900 5410 6850 23400
. 50 . 5 0. 5 0 000 0. 0. 00 5000 0. 000 HM 0 HM 0
1.7500 3.8750 1.2188 24000 6210 7870 29700
. 50 . 5 0. 5 0 000 0. 0. 00 5000 0. 000 HM 0 A HM 0
1.7500 3.8750 1.2188 24000 6210 7870 29700
. 50 . 5 0. 5 0 000 0. 0. 00 5000 0. 000 HM 0 HM 0
1.7500 3.8750 1.2188 24000 6210 7870 29700
. 50 0 . 00 0. 5 00 0. 0. 000 0500 0. 0 000 5 5
1.7500 4.0000 1.2188 20900 5410 6850 23400
. 50 0 . 00 0. 5 00 0. 0. 000 0500 0. 0 000 5 5
1.7500 4.0000 1.2188 20900 5410 6850 23400
. 50 0 . 00 . 50 000 0. 0 .50 00 00 . 55000 5 5 0
1.7500 4.0000 1.2500 27600 7160 4910 35000
. 50 0 . 00 . 50 000 0. 0 .50 00 00 . 55000 5 5 0
1.7500 4.0000 1.2500 27600 7160 4910 35000
. 50 0 . 00 . 5 5 000 0. . 0 500 00 .05 000 5 5
1.7500 4.0000 1.3750 34300 8880 4340 43000
. 50 0 . . 5 000 0. 0 .0 5 000 5 00 . 000 5 5 5 5
1.7500 4.0625 1.7188 44200 11500 5820 60100
. 50 0 . 5 0. 000 0. . 0 00 0 00 . 000 5 0 5 0
1.7500 4.1250 1.1875 31900 8270 4710 42600
. 50 0 . 5 0. 000 0. . 00 00 . 000 0 5 X
1.7500 4.1250 1.1875 28200 7320 4200 37200
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
0. 0 . - . .5 5 .0 5 .0 . .0 .0 . 0 0. 0 . .5 0.0 0 .0
1.1930 0.9375 -0.32 0.14 2.05 2.28 0.13 3.50 3.27 0.07 0.04
2.23
. 0 .0 0 - . 0. 5 .0 5 .0 . .0 .0 . 0 . 0 . . 0. 0 .0
1.1563 0.9063 -0.15 0.03 2.24 2.24 0.13 3.58 3.19 0.09 0.11
2.25
. 0 .0 0 - . 0. 5 .0 5 .0 0. .0 .0 . 0 . 0 . . 0. 0 .0
1.1563 0.9063 -0.15 0.03 2.24 2.24 0.03 3.58 3.27 0.09 0.11
2.28
. 0 .0 0 - . .5 5 .0 .0 . .0 .0 . 0 . 0 . . 0. 0 .0
1.1563 0.9063 -0.15 0.14 2.24 2.48 0.13 3.58 3.19 0.09 0.11
2.24
. 0 0. -0. . 5 .5 5 .0 0. .0 .0 5. 0 . 0 . . 0.0 0 0.
1.1142 0.8125 -0.01 0.05 2.07 2.32 0.03 3.50 3.19 0.22 0.08
2.05
. 0 0. -0. . 5 .5 5 .0 . .0 0.0 5. 0 . 0 . . 0.0 0 0.
1.1142 0.8125 -0.01 0.05 2.07 2.32 0.09 3.50 3.15 0.22 0.08
2.04
. 0 0. -0. .5 5 .5 .0 0. .0 .0 5. 0 . 0 . . 0.0 0 0.
1.1142 0.8125 -0.01 0.14 2.07 2.48 0.03 3.50 3.19 0.22 0.08
2.04
. 0 0. -0. .0 5 .5 0.0 0. .0 .0 5. 0 . 0 . . 0.0 0 0.
1.1142 0.8125 -0.01 0.08 2.07 2.36 0.03 3.50 3.19 0.22 0.08
2.05
. 00 . 5 0.5 . 5 .0 .0 0. .0 .0 . 0 . 0 . . 0. 0 0 .00
1.1142 0.8750 0.02 0.05 2.13 2.40 0.03 3.58 3.19 0.16 0.09
2.20
. 00 . 5 0.5 .5 5 .0 5.0 0. .0 .0 . 0 . 0 . . 0. 0 0 0.
1.1142 0.8750 0.02 0.14 2.13 2.56 0.03 3.58 3.19 0.16 0.09
2.19
.5 5 . 5 0.5 .5 5 .0 5.0 0. .0 .0 . 0 .00 . . 0. 0 0 .00
1.1250 0.8750 0.02 0.14 2.13 2.56 0.03 3.58 3.19 0.16 0.08
2.19
. 5. 5 - .0 .5 5 .0 5 .0 0. .0 .0 . 0 .00 5. 0.0 5 0.
0.8640 0.6250 -0.12 0.14 2.09 2.32 0.03 3.62 3.50 0.04 0.08
1.67
0. 0 . - . .5 5 .0 5 .0 . 0.0 .0 . 0 0. 0 . .5 0.0 0 . 0
1.1930 0.9375 -0.32 0.14 2.05 2.28 0.13 3.54 3.31 0.07 0.04
2.42
. 0 0. -0. . 5 .5 5 .0 0. .0 .0 5. 0 . 0 . . 0.0 0 .0
1.1142 0.8125 -0.01 0.05 2.07 2.32 0.03 3.58 3.23 0.22 0.08
2.22
. 0 0. -0. .5 5 .5 .0 0. .0 .0 5. 0 . 0 . . 0.0 0 .00
1.1142 0.8125 -0.01 0.14 2.07 2.48 0.03 3.58 3.23 0.22 0.08
2.21
. 0 0. -0. . 5 .5 5 .0 .5 .0 .0 5. 0 . 0 . . 0.0 0 .0
1.1142 0.8125 -0.01 0.05 2.07 2.32 0.06 3.58 3.23 0.22 0.08
2.22
. 0 0. -0. .5 5 .5 .0 .5 .0 .0 5. 0 . 0 . . 0.0 0 .00
1.1142 0.8125 -0.01 0.14 2.07 2.48 0.06 3.58 3.23 0.22 0.08
2.20
. 00 . 5 0.5 . 5 .0 .0 0. .0 .0 . 0 . 0 . . 0. 0 0 .0
1.1142 0.8750 0.02 0.05 2.13 2.40 0.03 3.62 3.23 0.16 0.09
2.38
. 00 . 5 0.5 .5 5 .0 5.0 0. .0 .0 . 0 . 0 . . 0. 0 0 .0
1.1142 0.8750 0.02 0.14 2.13 2.56 0.03 3.62 3.23 0.16 0.09
2.37
.5 5 . 5 0.5 .5 5 .0 5.0 0. .0 .0 . 0 .00 . . 0. 0 0 .0
1.1250 0.8750 0.02 0.14 2.13 2.56 0.03 3.62 3.23 0.16 0.08
2.38
. 0 0. -0. . 5 .5 5 .0 0. .0 .0 5. 0 . 0 . . 0.0 0 .0
1.1142 0.8125 -0.01 0.05 2.07 2.32 0.03 3.62 3.31 0.22 0.08
2.40
. 0 0. -0. .5 5 .5 .0 0. .0 .0 5. 0 . 0 . . 0.0 0 .0
1.1142 0.8125 -0.01 0.14 2.07 2.48 0.03 3.62 3.31 0.22 0.08
2.39
. 50 5. 00 - . 0. 5 .0 55.0 . .0 .0 . 0 . 0 . . 0.0 .
1.2500 1.0000 -0.28 0.03 2.13 2.17 0.13 3.78 3.46 0.09 0.05
2.74
. 50 5. 00 - . .5 5 .0 0.0 . .0 .0 . 0 . 0 . . 0.0 .
1.2500 1.0000 -0.28 0.14 2.13 2.36 0.13 3.78 3.46 0.09 0.05
2.73
.0 . - . .5 5 .0 5 .0 . 5.0 .0 . 0 . 0 5 . . 0.0 .
1.4200 1.0625 -0.50 0.14 2.09 2.32 0.13 3.74 3.50 0.11 0.07
3.01
. 5 .5 - .0 . 5 .0 5 .0 . .0 .0 . 0 0. 0 . 5.5 0.0 5 . 5
1.7510 1.4375 -0.63 0.05 2.20 2.28 0.13 3.82 3.50 0.10 0.04
4.07
0. 5 . - . 0. 5 .0 55.0 . .0 .0 . 0 . 0 .5 . 0.0 .
1.2188 0.9375 -0.32 0.03 2.13 2.17 0.13 3.90 3.66 0.08 0.07
2.93
. . 05 - . .5 5 .0 0.0 . .0 .0 . 0 . 0 5 . . 0.0 .
1.1542 0.9687 -0.28 0.14 2.13 2.36 0.13 3.86 3.62 0.09 0.05
2.82
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 50 0 . 5 .5 5 000 0. 0 . 000 00 . 5 0 000 5 5 5
1.7500 4.1250 1.4375 35500 9210 6340 45400
. 50 0 . 5 .5 5 000 0. 0 . 000 00 . 5 0 000 5 5 5
1.7500 4.1250 1.4375 35500 9210 6340 45400
. 50 0 . 5 .5 5 000 0. 0 . 000 00 . 5 0 000 5 5
1.7500 4.1250 1.4375 35500 9210 6340 45400
. 50 0 . 5 .5 5 000 0. 0 . 000 00 . 5 0 000 5 5
1.7500 4.1250 1.4375 35500 9210 6340 45400
. 50 0 . 5 .5 5 000 0. . 00 00 . 0 000 HM 0 0 0 HM 0 0 0
1.7500 4.1250 1.4375 35700 9260 7730 50200
. 50 05.000 . 5 000 0. . 00 00 . 0 000 HM 0 0 0 JHM 0 0
1.7500 4.1339 1.4517 35700 9260 7730 50200
. 50 0 . 50 . 000 0. . 00 00 . 000 0 5 A
1.7500 4.2500 1.0938 28200 7320 4200 37200
. 50 0 . 50 .5 5 000 0. 0 . 000 00 . 5 0 000 5 5 5
1.7500 4.2500 1.4375 35500 9210 6340 45400
. 50 . 5 0. 500 0. 0. 5500 00 0. 000 55 5 55
1.7500 4.3750 1.1875 22100 5740 8690 26700
. 50 . 5 0. 000 0. 0. 0 00 00 0. 000 55 5C 55
1.7500 4.3750 1.1875 26500 6880 10400 36200
. 50 . 5 0. 000 0. 0. 0 00 00 0. 000 55 C 55
1.7500 4.3750 1.1875 26500 6880 10400 36200
. 50 . 5 0. 000 0. 0. 500 00 0. 5 000 HM 0 5 HM 0
1.7500 4.3750 1.1875 25600 6640 10000 34400
. 50 . 5 . 00 5 000 0. 0 .0 00 000 . 0 000 5 5 5 A
1.7500 4.3750 1.5000 35800 9290 4720 46200
. 50 . 0. 500 0. 0. 5500 00 0. 000 55 5 55
1.7500 4.4375 1.1875 22100 5740 8690 26700
. 50 . 0. 000 0. 0. 0 00 00 0. 000 55 C 55
1.7500 4.4375 1.1875 26500 6880 10400 36200
. 50 . 0. 000 0. 0. 500 00 0. 5 000 HM 0 5 HM 0
1.7500 4.4375 1.1875 25600 6640 10000 34400
. 50 . 00 . 50 0 000 0. . 5 00 500 . 5 000 5 5 0
1.7500 4.5000 1.7500 46500 12100 8880 57500
. 50 . 00 . 50 0 000 0. . 5 00 500 . 5 000 5 5 5 0
1.7500 4.5000 1.7500 46500 12100 8880 57500
. 50 0. 50 . 5 000 0. . 00 00 . 000 5
1.7500 4.7500 1.6250 43200 11200 6020 54800
. 50 .000 50. 00 000 0. 0 .0 500 500 . 0000 0
1.7500 5.0000 2.0000 63700 16500 8440 83300
. . . 00 0. . 00 500 . 000 55 55 0
1.7710 3.2650 0.9375 18800 4880 2800 24900
. . . 00 0. . 00 500 . 000 55 55
1.7710 3.2650 1.0625 18800 4880 2800 24900
. .05 . 00 0. . 00 500 . 000 55 55
1.7710 3.2700 0.9375 18800 4880 2800 24900
. . .000 5 00 0. . 5 5000 00 . 00
1.7710 3.3460 0.7480 13000 3370 2560 15600
. 5.000 . 00 0. . 00 500 . 000 55 55
1.7710 3.3465 0.9375 18800 4880 2800 24900
. . 0. 000 0. . 00 000 . 5 000 0
1.7710 3.6718 1.1875 25400 6590 3820 34300
. . . 00 0. . 00 500 . 000 55 A 55
1.7712 3.2273 0.9400 18800 4880 2800 24900
. . . 00 0. . 00 500 . 000 55 A 55 0
1.7712 3.2650 0.9375 18800 4880 2800 24900
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.5 .5 5 - . .5 5 .0 .0 . .0 .0 . 0 . 0 5 . . 0.0 .5
1.4375 1.1250 -0.38 0.14 2.20 2.48 0.13 3.90 3.62 0.14 0.05
3.39
.5 .5 5 - . .5 5 .0 .0 0. 0 .0 .0 . 0 . 0 5 . . 0.0 .55
1.4375 1.1250 -0.38 0.14 2.20 2.48 0.03 4.02 3.43 0.14 0.05
3.42
.5 .5 5 - . 0. 5 .0 5 .0 . .0 .0 . 0 . 0 5 . . 0.0 .55
1.4375 1.1250 -0.38 0.03 2.20 2.24 0.13 3.90 3.62 0.14 0.05
3.41
.5 .5 5 - . 0. 5 .0 5 .0 0. 0 .0 .0 . 0 . 0 5 . . 0.0 .5
1.4375 1.1250 -0.38 0.03 2.20 2.24 0.03 4.02 3.43 0.14 0.05
3.44
.5 .5 5 - . .5 5 .0 .0 . 00.0 .0 . 0 . 0 . . 0.0 0 .5
1.4375 1.1250 -0.29 0.14 2.32 2.60 0.13 3.94 3.50 0.14 0.08
3.52
.5 .000 - . .5 5 .0 .0 .5 00.0 0.0 . 0 . 0 . . 0.0 0 .
1.4375 1.1417 -0.29 0.14 2.32 2.60 0.10 3.94 3.54 0.14 0.08
3.55
. . 5 - . .5 5 .0 0.0 0. 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 0.8750 -0.28 0.14 2.13 2.36 0.03 3.94 3.82 0.09 0.05
2.94
.5 .5 5 - . 0. 5 .0 5 .0 . 0 .0 .0 . 0 . 0 5 . . 0.0 .
1.4375 1.1250 -0.38 0.03 2.20 2.24 0.13 3.98 3.66 0.14 0.05
3.67
. 0 0. . .5 0.0 .0 . 05.0 .0 . 0 . 0 . . 0. 0 5 .
1.0594 0.8125 0.28 0.14 2.36 2.64 0.13 4.13 3.62 0.19 0.13
2.99
. 0 0. . .5 .0 0.0 . 05.0 .0 5.00 . 0 . 5. 0. .
1.0594 0.8125 0.30 0.14 2.52 2.76 0.13 4.13 3.62 0.20 0.14
3.18
. 0 0. . 0. 5.0 .0 . 05.0 .0 5.00 . 0 . 5. 0. .
1.0594 0.8125 0.30 0.03 2.56 2.80 0.13 4.13 3.62 0.20 0.14
3.18
.5 5 0. . 0. 5.0 .0 . 05.0 .0 . 0 .00 . . 0. .
1.1250 0.8125 0.30 0.03 2.56 2.52 0.13 4.13 3.58 0.18 0.08
3.21
. 5 0. - . .5 5 .0 0.0 . 00.0 5.0 . 0 0. 0 . . 0.0 .
1.4550 1.1875 -0.48 0.14 2.13 2.36 0.13 3.94 3.74 0.11 0.04
4.04
. 0 0. . .5 0.0 .0 . 0 .0 .0 . 0 . 0 . . 0. 0 5 . 0
1.0594 0.8125 0.28 0.14 2.36 2.64 0.13 4.17 3.62 0.19 0.13
3.09
. 0 0. . 0. 5.0 .0 . 0 .0 .0 5.00 . 0 . 5. 0. .
1.0594 0.8125 0.30 0.03 2.56 2.80 0.13 4.17 3.62 0.20 0.14
3.28
.5 5 0. . 0. 5.0 .0 . 0 .0 .0 . 0 .00 . . 0. .5
1.1250 0.8125 0.30 0.03 2.56 2.52 0.13 4.17 3.58 0.18 0.08
3.35
. 50 . 5 - . .0 0.0 .0 . 0 .0 .0 . 0 .00 . 0. 05 .
1.7500 1.3750 -0.49 0.08 2.36 2.52 0.13 4.21 3.82 0.14 0.04
5.09
. 50 . 5 - . .5 0.0 .0 . 0 .0 .0 . 0 .00 . 0. 05 . 0
1.7500 1.3750 -0.49 0.14 2.36 2.64 0.13 4.21 3.82 0.14 0.04
5.08
. 5 . 50 - .0 .5 5 .0 .0 . 0.0 05.0 . 0 . 0 5. . 0.0 .
1.6250 1.2500 -0.55 0.14 2.20 2.44 0.13 4.33 4.13 0.15 0.07
5.34
5 . . 5 - . .5 0.0 .0 . .0 0 .0 . 0 . 0 0 . 0.0 5 .55
2.0625 1.6250 -0.77 0.14 2.36 2.64 0.13 4.61 4.25 0.09 0.10
7.82
5. 00 .050 - . .5 5 .0 5 .0 0. .0 .0 .00 0. 0 5. . 0.0 0 0.55
1.0000 0.7500 -0.25 0.06 2.01 2.09 0.03 3.03 2.91 0.04 0.03
1.22
5. 00 . 5 - . .5 5 .0 5 .0 . .0 .0 .00 0. 0 5. . 0.0 0 0. 0
1.0000 0.8750 -0.25 0.06 2.01 2.09 0.09 3.03 2.83 0.04 0.03
1.31
5. 00 .050 - . .5 5 .0 5 .0 . .0 .0 .00 0. 0 5. . 0.0 0 0.55
1.0000 0.7500 -0.25 0.06 2.01 2.09 0.13 3.03 2.83 0.04 0.03
1.20
. 5. 5 - . .0 50.0 5 .0 .5 .0 .0 * * . 5. 0.0 0.
0.7545 0.6250 -0.05 0.08 1.97 2.13 0.06 3.07 2.91 * *
1.01
5. 00 .050 - . .5 5 .0 5 .0 . .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7500 -0.25 0.06 2.01 2.09 0.09 3.07 2.91 0.04 0.03
1.30
0. 0 . - . .5 5 .0 5 .0 . .0 .0 . 0 0. 0 . .5 0.0 0 0. 5
1.1930 0.9375 -0.32 0.14 2.09 2.32 0.13 3.46 3.23 0.07 0.04
2.09
5. 00 . - . .5 5 .0 5 .0 .0 .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7525 -0.25 0.14 2.01 2.24 0.04 3.03 2.91 0.04 0.03
1.17
5. 00 .050 - . .5 5 .0 5 .0 0. .0 .0 .00 0. 0 5. . 0.0 0 0.55
1.0000 0.7500 -0.25 0.14 2.01 2.24 0.03 3.03 2.91 0.04 0.03
1.21
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 0.000 5.000 500 0. . 0 00 00 . 5 00 X X
1.7712 3.5433 0.9843 17900 4640 2540 21500
. 5. 50 0. 5 0 000 0. 0. 00 5000 0. 000 HM 0 HM 0 0
1.7712 3.7500 1.2188 24000 6210 7870 29700
5.000 5.000 0.000 500 0. .5 5 00 0 00 . 00 XAA 00 X Y 00 X
1.7717 2.9528 0.7874 13800 3580 2410 19000
5.000 5.000 0.000 500 0. .5 5 00 0 00 . 00 XAB- 00 X Y 00 X
1.7717 2.9528 0.7874 13800 3580 2410 19000
5.000 5.000 0. 5 00 0. . 00 0 00 . 00 5 5 A
1.7717 3.3465 0.8125 17000 4420 2320 20000
5.000 5.000 0. 5 00 0. . 00 0 00 . 00 5 5 X
1.7717 3.3465 0.8125 17000 4420 2320 20000
5.000 5.000 0. 5 00 0. . 00 0 00 . 00 5 A 5 A
1.7717 3.3465 0.8125 17000 4420 2320 20000
5.000 5.000 0. 5 00 0. . 00 0 00 . 00 5 X 5 X
1.7717 3.3465 0.8125 17000 4420 2320 20000
5.000 . . 5 00 0. . 00 0 00 . 00 5 5 5
1.7717 3.4375 1.0625 17000 4420 2320 20000
5.000 . 00 0. 500 0. . 0 00 00 . 5 00 A
1.7717 3.5000 0.8125 17900 4640 2540 21500
5.000 . 0 . 50 00 0. .5 00 5 00 .55 0000 J 5 5 0
1.7717 3.5425 0.9744 20600 5340 3450 29200
5.000 0.000 0.000 500 0. . 0 00 00 . 5 00
1.7717 3.5433 0.7874 17900 4640 2540 21500
5.000 0.000 . 000 0. . 0500 00 .05 000 5-S 0X
1.7717 3.5433 1.0938 26400 6850 3330 32400
5.000 0. .000 5 00 0. . 00 0 00 . 00 5 5
1.7717 3.5480 0.9055 17000 4420 2320 20000
5.000 . 0. 00 0. . 00 00 . 0 000
1.7717 3.6718 0.8125 18300 4750 2750 22700
5.000 5.000 .000 500 0. 0. 000 5500 0. 000 JW 5 JW 5 0
1.7717 3.7402 1.1417 20800 5390 7990 25600
5.000 . . 5 00 0. . 00 00 . 0 000 A
1.7717 3.8125 0.8750 18300 4750 2750 22700
5.000 . . 5 00 0. . 00 00 . 0 000 X A
1.7717 3.8125 0.8750 18300 4750 2750 22700
5.000 00.000 5.000 00 0. . 00 00 . 0 000
1.7717 3.9370 0.9842 18300 4750 2750 22700
5.000 0 . 5 . 000 0. . 00 00 . 000 55 5 5
1.7717 4.1250 1.5625 37500 9730 5590 53200
5.000 0 . 50 . 000 0. . 00 00 . 000 5 -S 5 A
1.7717 4.2500 1.0938 28200 7320 4200 37200
5. 0 . 5 . 00 0. . 500 0 00 . 0 00
1.7807 3.1490 0.7812 14300 3720 2330 18700
5. . 0. 05000 0. . 00 00 . 000 5 5 0
1.7810 3.3125 1.1875 23600 6120 3210 30100
5. . 0. 05000 0. . 00 00 . 000 5 5 5
1.7810 3.4375 1.1875 23600 6120 3210 30100
5. . .55 5 00 0. . 00 0 . 00 LM 0 LM 0 0
1.7812 2.8910 0.7700 12800 3320 1730 18400
5. . . 0 5 00 0. . 00 0 . 00 LM 0 LM 0
1.7812 2.8910 0.8437 12800 3320 1730 18400
5. . . 5 00 0. . 5500 00 . 00 LM 0 0 AS LM 0 0
1.7812 3.0625 0.7812 13400 3470 2540 17500
5. . . 5 00 0. . 5500 00 . 00 LM 0 0 LM 0 0
1.7812 3.0625 0.7812 13400 3470 2540 17500
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 5 0.000 - . .5 5 .0 5 .0 .0 .0 0.0 0.50 .00 . 0.0 0.
0.8750 0.7874 -0.17 0.06 2.01 2.13 0.08 3.31 3.15 0.02 0.04
1.47
.5 5 . 5 0.5 .5 5 .0 .0 0. .0 .0 * * . . 0. 0 0 0.
1.1250 0.8750 0.02 0.14 2.13 2.60 0.03 3.58 3.19 * *
2.18
0.000 5.500 - . .0 5 .0 5 .0 .0 .0 .0 0. 0 . 0 . . 0.0 0.
0.7874 0.6102 -0.13 0.12 2.01 2.24 0.04 2.83 2.68 0.02 0.08
0.76
0.000 5.500 - . 0.0 5 .0 5 .0 .0 .0 .0 0. 0 . 0 . . 0.0 0.
0.7874 0.6102 -0.13 0.00 2.01 2.28 0.04 2.83 2.68 0.02 0.08
0.75
. . - . .5 50.0 5 .0 . 0.0 .0 0.50 . 0 0 . 0.0 0.5
0.8540 0.6875 -0.19 0.06 1.97 2.09 0.05 3.15 3.03 0.02 0.07
1.12
. . - . .5 50.0 5 .0 .5 0.0 .0 0.50 . 0 0 . 0.0 0.5
0.8540 0.6875 -0.19 0.06 1.97 2.09 0.06 3.15 3.03 0.02 0.07
1.12
. . - . .5 50.0 5 .0 . 0.0 .0 0.50 . 0 0 . 0.0 0.50
0.8540 0.6875 -0.19 0.14 1.97 2.24 0.05 3.15 3.03 0.02 0.07
1.11
. . - . .0 50.0 5 .0 .5 0.0 .0 0.50 . 0 0 . 0.0 0.5
0.8540 0.6875 -0.19 0.08 1.97 2.13 0.06 3.15 3.03 0.02 0.07
1.12
. . - . .5 50.0 5 .0 . .0 5.0 0.50 . 0 0 . 0.0 0.
0.8540 0.9375 -0.19 0.06 1.97 2.09 0.13 3.19 2.95 0.02 0.07
1.42
. 5 .5 - . .0 5 .0 55.0 . .0 .0 0.50 .00 . 0.0 0.5
0.8750 0.6501 -0.17 0.08 2.01 2.17 0.05 3.31 3.19 0.02 0.04
1.29
5. 00 . - . 0. 5 .0 55.0 . .0 .0 . 0 .00 . . 0.0 0. 5
1.0000 0.7869 -0.19 0.03 2.24 2.17 0.09 3.39 3.19 0.06 0.04
1.65
. 5 5. 5 - . .0 5 .0 55.0 .0 .0 .0 0.50 .00 . 0.0 0.5
0.8750 0.6250 -0.17 0.08 2.01 2.17 0.08 3.31 3.19 0.02 0.04
1.31
. 00 . 5 - . .0 5 .0 55.0 .0 .0 .0 . 0 0. 0 .5 . 0.0 05 0. 0
1.1772 0.8750 -0.36 0.08 2.01 2.17 0.08 3.31 3.19 0.06 0.02
1.76
. . 0 - . .5 50.0 5 .0 . .0 .0 0.50 . 0 0 . 0.0 0.
0.8540 0.8586 -0.19 0.06 1.97 2.09 0.09 3.23 3.07 0.02 0.07
1.47
. 5 5.0 - . 0. 5 .0 5 .0 . .0 5.0 0. 0 . 0 . 5. 0.0 0.
0.8750 0.5938 -0.15 0.03 2.05 2.09 0.05 3.46 3.35 0.03 0.06
1.48
.500 0.000 . .5 5 .0 .0 .5 0.5 .0 . 0 .00 0. . 0. 0 0.
1.0433 0.7874 0.16 0.10 2.13 2.52 0.10 3.56 3.07 0.18 0.12
2.00
. 5 .050 - . 0. 5 .0 5 .0 .5 0.0 .0 0. 0 . 0 . 5. 0.0 0.
0.8750 0.7500 -0.15 0.03 2.05 2.09 0.06 3.54 3.39 0.03 0.06
1.75
. 5 .050 - . .0 5 .0 5 .0 .5 0.0 .0 0. 0 . 0 . 5. 0.0 0.
0.8750 0.7500 -0.15 0.08 2.05 2.20 0.06 3.54 3.39 0.03 0.06
1.74
. 5 . - . 0. 5 .0 5 .0 .0 0.0 .0 0. 0 . 0 . 5. 0.0 0.
0.8750 0.8592 -0.15 0.03 2.05 2.09 0.08 3.54 3.39 0.03 0.06
2.05
0. 5 . - . .5 5 .0 .0 . .0 0.0 . 0 . 0 . .5 0. 0 .
1.5810 1.3125 -0.49 0.14 2.20 2.44 0.13 3.90 3.54 0.07 0.05
3.88
. . 5 - . . 55.0 5 .0 0. 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 0.8750 -0.28 0.09 2.17 2.28 0.03 3.94 3.82 0.09 0.05
2.93
0. 5.0 0 - . .0 50.0 5 .0 . 5.0 .0 . 0 . 0 . . 0.0 0 0. 0
0.8125 0.5937 -0.15 0.08 1.97 2.13 0.05 2.95 2.83 0.04 0.05
0.88
0. . - 0. .5 5 .0 5 .0 . .5 .0 . 0 0. 0 .5 0.5 0.0 0 0.
1.2160 0.9375 -0.40 0.14 2.05 2.28 0.13 3.13 2.91 0.09 0.03
1.48
0. . - 0. .5 5 .0 5 .0 . .0 5.0 . 0 0. 0 .5 0.5 0.0 0 0. 5
1.2160 0.9375 -0.40 0.14 2.05 2.28 0.13 3.19 2.95 0.09 0.03
1.65
. 5. - . .5 50.0 5 .0 0. 0.0 .0 0. 0 . 0 . 0.0 0.
0.7800 0.6200 -0.18 0.14 1.97 2.20 0.03 2.76 2.68 0.03 0.04
0.70
. . 0 - . .5 50.0 5 .0 0. 0.0 .0 0. 0 . 0 . 0.0 0.
0.7800 0.6937 -0.18 0.14 1.97 2.20 0.03 2.76 2.64 0.03 0.04
0.74
. 5.0 0 - . 0. 5 .0 5 .0 0. .0 .0 . 0 .50 . . 0.0 5 0.
0.7812 0.5937 -0.09 0.03 2.05 2.09 0.03 2.91 2.80 0.05 0.06
0.81
. 5.0 0 - . .5 5 .0 5 .0 0. .0 .0 . 0 . 0 . . 0.0 5 0.
0.7812 0.5937 -0.09 0.14 2.05 2.28 0.03 2.91 2.80 0.05 0.06
0.81
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
5. . . 0 5 00 0. . 5500 00 . 00 LM 0 0 LM 0 0
1.7812 3.0625 0.8437 13400 3470 2540 17500
5. . . 5 00 0. . 5500 00 . 00 LM 0 0 LM 0 0
1.7812 3.1486 0.7812 13400 3470 2540 17500
5. . . 0 5 00 0. . 5500 00 . 00 LM 0 0 LM 0 0 5
1.7812 3.1486 0.8437 13400 3470 2540 17500
5. . . 00 0. . 00 500 . 000 55 0 55 0
1.7960 3.2650 0.9375 18800 4880 2800 24900
5. . . 00 0. . 00 500 . 000 55 0 55
1.7960 3.2650 1.0625 18800 4880 2800 24900
5. .05 . 00 0. . 00 500 . 000 55 0 55
1.7960 3.2700 0.9375 18800 4880 2800 24900
5. .05 . 00 0. . 00 500 . 000 55 0 55
1.7960 3.2700 0.9400 18800 4880 2800 24900
5. 5.000 . 00 0. . 00 500 . 000 55 0 55
1.7960 3.3465 1.0625 18800 4880 2800 24900
5. .0 5 . 00 0. . 00 500 . 000 55 0 55
1.7960 3.6250 0.9375 18800 4880 2800 24900
5. . .000 5 00 0. 0 . 00 0 . 5 5 00 LM50 A LM50 0
1.8105 2.9518 0.7087 11800 3070 2110 17000
5. . .000 5 00 0. 0 . 00 0 . 5 5 00 LM50 LM50 0
1.8105 2.9518 0.7087 11800 3070 2110 17000
5. 0. 5 .000 000 0. . 0 500 00 . 000 HM 0 0 HM 0 0 0
1.8105 3.5817 1.2598 29900 7760 4420 38600
.0 . . 00 00 0. . 0 5 0 . 00 LL 05 LL 05 0
1.8125 3.0625 0.5000 7770 2010 1160 10600
.0 . 5 . 00 0. . 0 500 0 .5 00 0 0
1.8125 3.1250 0.6875 10800 2810 1800 13800
.0 0. .050 000 0.5 . 00 000 . 00
1.8125 3.1875 0.7500 10600 2740 2480 13700
.0 . . 00 0. . 00 500 . 000 55 55 0
1.8125 3.2650 0.9375 18800 4880 2800 24900
.0 . . 5 5 00 0. . 00 0 00 . 00 5 -S 5 0
1.8125 3.3125 1.0628 17000 4420 2320 20000
.0 5.000 0. 5 00 0. . 00 0 00 . 00 5 A 5 A
1.8125 3.3465 0.8125 17000 4420 2320 20000
.0 5.000 0. 5 00 0. . 00 0 00 . 00 5 -S 5 A
1.8125 3.3465 0.8125 17000 4420 2320 20000
.0 5.000 0. 5 00 0. . 00 0 00 . 00 5 -S 5 X
1.8125 3.3465 0.8125 17000 4420 2320 20000
.0 5.000 5. 00 00 0. 5 . 00 00 . 000
1.8125 3.3465 1.0000 19400 5040 2980 26200
.0 5.000 5. 00 00 0. 5 . 00 00 . 000 A
1.8125 3.3465 1.0000 19400 5040 2980 26200
.0 . . 00 0. 5 . 00 00 . 000 5
1.8125 3.4375 1.0625 19400 5040 2980 26200
.0 . . 5 00 0. . 00 0 00 . 00 5 -S 5 5
1.8125 3.4375 1.0625 17000 4420 2320 20000
.0 . 5 .000 5 00 0. . 00 0 00 . 00 5 -S 5 A
1.8125 3.4990 0.9055 17000 4420 2320 20000
.0 0. .000 5 00 0. . 00 0 00 . 00 5 -S 5
1.8125 3.5480 0.9055 17000 4420 2320 20000
.0 . 0. 000 0. . 00 000 . 5 000 0
1.8125 3.6718 1.1875 25400 6590 3820 34300
.0 5. 50 . 000 0. . 0500 00 .05 000
1.8125 3.7500 1.0938 26400 6850 3330 32400
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. . - . .5 5 .0 5 .0 0. .0 0.0 . 0 . 0 . . 0.0 5 0.
0.7812 0.6562 -0.09 0.14 2.05 2.28 0.03 2.91 2.76 0.05 0.06
0.85
. 5.0 0 - . .5 5 .0 5 .0 0. 5.0 .0 . 0 . 0 . . 0.0 5 0. 0
0.7812 0.5937 -0.09 0.14 2.05 2.28 0.03 2.95 2.80 0.05 0.06
0.88
. . - . .5 5 .0 5 .0 0. 5.0 .0 . 0 . 0 . . 0.0 5 0.
0.7812 0.6562 -0.09 0.14 2.05 2.28 0.03 2.95 2.80 0.05 0.06
0.92
5. 00 .050 - . .5 5 .0 5 .0 0. .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7500 -0.25 0.14 2.01 2.28 0.03 3.03 2.91 0.04 0.03
1.19
5. 00 . 5 - . .5 5 .0 5 .0 . .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.8750 -0.25 0.14 2.01 2.28 0.09 3.03 2.83 0.04 0.03
1.28
5. 00 .050 - . .5 5 .0 5 .0 . .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7500 -0.25 0.14 2.01 2.28 0.13 3.03 2.83 0.04 0.03
1.17
5. 00 . - . .5 5 .0 5 .0 .0 .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7525 -0.25 0.14 2.01 2.28 0.08 3.03 2.87 0.04 0.03
1.19
5. 00 . 5 - . .5 5 .0 5 .0 . .0 .0 .00 0. 0 5. . 0.0 0 0.
1.0000 0.8750 -0.25 0.14 2.01 2.28 0.09 3.07 2.87 0.04 0.03
1.39
5. 00 .050 - . .5 5 .0 5 .0 0. 0.0 .0 .00 0. 0 5. . 0.0 0 0.
1.0000 0.7500 -0.25 0.14 2.01 2.28 0.03 3.15 3.07 0.04 0.03
1.60
.000 .000 - .0 0.0 5 .0 5 .0 .5 .0 .0 0. 0 .50 . . 0.0 0. 0
0.7087 0.5512 -0.08 0.00 2.01 2.24 0.06 2.80 2.64 0.04 0.06
0.65
.000 .000 - .0 . 5 .0 55.0 .5 .0 .0 0. 0 .50 . . 0.0 0. 0
0.7087 0.5512 -0.08 0.09 2.01 2.17 0.06 2.80 2.64 0.04 0.06
0.67
.000 .500 - . .5 55.0 .0 .5 .0 .0 .50 . 0 . . 0.0 5 0.
1.2598 1.0433 -0.38 0.14 2.17 2.48 0.14 3.39 3.11 0.06 0.07
2.02
. 00 .5 5 0.0 .5 5 .0 5 .0 .5 .0 .0 0. 0 . 0 . . 0.0 0.
0.5000 0.3750 0.00 0.06 2.05 2.13 0.06 2.91 2.80 0.01 0.07
0.52
. . 5 - .0 . 5 .0 5 .0 .5 .0 .0 0. 0 . 0 . . 0.0 5 0.
0.6875 0.5313 -0.08 0.11 2.01 2.20 0.06 2.91 2.80 0.03 0.06
0.73
. . 0. 0. 5 .0 5 .0 .5 .0 .0 . 0 . 0 5. 0.0 0.
0.6875 0.5625 0.03 0.03 2.05 2.05 0.06 2.99 2.83 0.06 0.08
0.83
5. 00 .050 - . .5 5 .0 5 .0 0. .0 .0 .00 0. 0 5. . 0.0 0 0.5
1.0000 0.7500 -0.25 0.14 2.05 2.28 0.03 3.03 2.91 0.04 0.03
1.17
. . - . . 5 .0 55.0 . .5 .0 0.50 . 0 0 . 0.0 0.55
0.8540 0.9375 -0.19 0.09 2.01 2.17 0.13 3.13 2.91 0.02 0.07
1.21
. . - . .5 5 .0 5 .0 . 0.0 .0 0.50 . 0 0 . 0.0 0.
0.8540 0.6875 -0.19 0.14 2.01 2.24 0.05 3.15 3.03 0.02 0.07
1.08
. . - . . 5 .0 55.0 . 0.0 .0 0.50 . 0 0 . 0.0 0.
0.8540 0.6875 -0.19 0.09 2.01 2.17 0.05 3.15 3.03 0.02 0.07
1.09
. . - . . 5 .0 55.0 .5 0.0 .0 0.50 . 0 0 . 0.0 0.
0.8540 0.6875 -0.19 0.09 2.01 2.17 0.06 3.15 3.03 0.02 0.07
1.09
5. 0 0. - . .5 5 .0 5 .0 . 0.0 .0 . 0 . 0 . 5. 0.0 0.
1.0082 0.8125 -0.25 0.14 2.05 2.28 0.05 3.15 2.99 0.07 0.04
1.34
5. 0 0. - . 0. 5 .0 5 .0 . 0.0 .0 . 0 . 0 . 5. 0.0 0.
1.0082 0.8125 -0.25 0.03 2.05 2.09 0.05 3.15 2.99 0.07 0.04
1.35
5. 0 . 5 - . .5 5 .0 5 .0 . .0 5.0 . 0 . 0 . 5. 0.0 0.
1.0082 0.8750 -0.25 0.14 2.05 2.28 0.09 3.19 2.95 0.07 0.04
1.50
. . - . . 5 .0 55.0 . .0 5.0 0.50 . 0 0 . 0.0 0.
0.8540 0.9375 -0.19 0.09 2.01 2.17 0.13 3.19 2.95 0.02 0.07
1.39
. . 0 - . . 5 .0 55.0 . .0 .0 0.50 . 0 0 . 0.0 0.
0.8540 0.8586 -0.19 0.09 2.01 2.17 0.09 3.19 3.07 0.02 0.07
1.37
. . 0 - . . 5 .0 55.0 . .0 .0 0.50 . 0 0 . 0.0 0. 5
0.8540 0.8586 -0.19 0.09 2.01 2.17 0.09 3.23 3.07 0.02 0.07
1.44
0. 0 . - . .5 5 .0 0.0 . .0 .0 . 0 0. 0 . .5 0.0 0 0.
1.1930 0.9375 -0.32 0.14 2.09 2.36 0.13 3.46 3.23 0.07 0.04
2.05
. 00 . 5 - . .5 5 .0 5 .0 . .0 .0 . 0 0. 0 .5 . 0.0 05 0.
1.1772 0.8750 -0.36 0.14 2.05 2.32 0.09 3.43 3.27 0.06 0.02
2.00
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
.0 5. 50 . 5 000 0. . 0500 00 .05 000 X
1.8125 3.7500 1.2501 26400 6850 3330 32400
. 5 . 00 0. 500 0. . 0 00 00 . 5 00 A A
1.8750 3.5000 0.8125 17900 4640 2540 21500
. 5 . 00 0. 500 0. . 0 00 00 . 5 00 -S A
1.8750 3.5000 0.8125 17900 4640 2540 21500
. 5 . 00 5. 00 00 0.55 . 0 00 00 .0 000 M 0 0 M 0 0 0
1.8750 3.5000 1.0000 20500 5320 4970 26100
. 5 . 00 5. 00 00 0.55 . 0 00 00 .0 000 M 0 0 M 0 0 0
1.8750 3.5000 1.0000 20500 5320 4970 26100
. 5 0.000 0.000 500 0. . 0 00 00 . 5 00 A
1.8750 3.5433 0.7874 17900 4640 2540 21500
. 5 0.000 0.000 500 0. . 0 00 00 . 5 00 -S
1.8750 3.5433 0.7874 17900 4640 2540 21500
. 5 . 0. 000 0. . 00 000 . 5 000 0
1.8750 3.6718 1.1875 25400 6590 3820 34300
. 5 . 0. 000 0. . 00 000 . 5 000 0
1.8750 3.6718 1.1875 25400 6590 3820 34300
. 5 . 0. 000 0. . 00 000 . 5 000 0
1.8750 3.6718 1.1875 25400 6590 3820 34300
. 5 5. 50 0. 000 0. . 00 000 . 5 000
1.8750 3.7500 1.1875 25400 6590 3820 34300
. 5 5. 50 0. 5000 0.55 . 0 00 00 .0 5 000 HM 0 HM 0 0
1.8750 3.7500 1.1875 25900 6710 6280 35400
. 5 . .000 00 0. 5 . 00 00 . 5 0 000 A A
1.8750 3.8125 0.8268 18900 4910 2980 24100
. 5 . 5 0. 000 0. . 00 000 . 5 000
1.8750 3.8750 1.1875 25400 6590 3820 34300
. 5 00.000 . 5 5 000 0. . 0 500 00 .05 000 5 5 0X
1.8750 3.9370 1.3750 34300 8880 4340 43000
. 5 0 . 00 . 50 000 0. 0 .50 00 00 . 55000 5 0 5 0
1.8750 4.0000 1.2500 27600 7160 4910 35000
. 5 0 . 00 . 5 5 000 0. . 0 500 00 .05 000 5 5
1.8750 4.0000 1.3750 34300 8880 4340 43000
. 5 0 . 00 . 5 000 0. 0 .50 00 00 . 55000 5 0 5
1.8750 4.0000 1.3750 27600 7160 4910 35000
. 5 0 . 00 . 5 5 000 0. . 0 500 00 .05 000 5 A 5
1.8750 4.0000 1.3750 34300 8880 4340 43000
. 5 0 . 00 . 5 5 000 0. . 0 500 00 .05 000 5 R 5
1.8750 4.0000 1.3750 34300 8880 4340 43000
. 5 0 . . 5 000 0. 0 .0 5 000 5 00 . 000 5 5 5 5
1.8750 4.0625 1.7188 44200 11500 5820 60100
. 5 0 . . 5 000 0. 0 .0 5 000 5 00 . 000 5 5 5
1.8750 4.0625 1.7188 44200 11500 5820 60100
. 5 0 . 5 0. 000 0. . 0 00 0 00 . 000 5 5 0
1.8750 4.1250 1.1875 31900 8270 4710 42600
. 5 0 . 5 0. 000 0. . 0 00 0 00 . 000 5 5
1.8750 4.1250 1.1875 31900 8270 4710 42600
. 5 0 . 5 .5 5 000 0. 0 . 000 00 . 5 0 000 5 5
1.8750 4.1250 1.4375 35500 9210 6340 45400
. 5 0 . 5 .5 5 000 0. 0 . 000 00 . 5 0 000 5 5
1.8750 4.1250 1.4375 35500 9210 6340 45400
. 5 0 . 50 . 000 0. . 00 00 . 000 5 A
1.8750 4.2500 1.0938 28200 7320 4200 37200
. 5 0 . 50 .5 5 000 0. 0 .0 00 000 . 0 000 5 5 X
1.8750 4.2500 1.4375 35800 9290 4720 46200
B
Caption:
Caption:
C
D
B
d
a
B 0 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 00 . 5 - . .5 5 .0 5 .0 . .0 .0 . 0 0. 0 .5 . 0.0 05 0.
1.1772 1.0313 -0.36 0.14 2.05 2.32 0.13 3.43 3.19 0.06 0.02
2.18
. 5 .5 - . .5 5 .0 0.0 . .0 .0 0.50 .00 . 0.0 0.55
0.8750 0.6501 -0.17 0.14 2.09 2.36 0.05 3.31 3.19 0.02 0.04
1.21
. 5 .5 - . . 5 .0 5 .0 . .0 .0 0.50 .00 . 0.0 0.55
0.8750 0.6501 -0.17 0.09 2.09 2.24 0.05 3.31 3.19 0.02 0.04
1.21
5. 00 .050 - . 0. 5 .0 5 .0 . 5.0 .0 . 0 .00 . .5 0.0 0.
1.0000 0.7500 -0.07 0.03 2.20 2.32 0.13 3.35 3.03 0.07 0.08
1.46
5. 00 .050 - . .5 5 .0 5.0 . 5.0 .0 . 0 .00 . .5 0.0 0.
1.0000 0.7500 -0.07 0.14 2.20 2.56 0.13 3.35 3.03 0.07 0.08
1.45
. 5 5. 5 - . .5 5 .0 0.0 .0 .0 .0 0.50 .00 . 0.0 0.5
0.8750 0.6250 -0.17 0.14 2.09 2.36 0.08 3.31 3.19 0.02 0.04
1.23
. 5 5. 5 - . . 5 .0 5 .0 .0 .0 .0 0.50 .00 . 0.0 0.5
0.8750 0.6250 -0.17 0.09 2.09 2.24 0.08 3.31 3.19 0.02 0.04
1.23
0. 0 . - . . 55.0 .0 . .0 .0 . 0 0. 0 . .5 0.0 0 0.
1.1930 0.9375 -0.32 0.25 2.17 2.64 0.13 3.46 3.23 0.07 0.04
1.95
0. 0 . - . .5 55.0 .0 . .0 .0 . 0 0. 0 . .5 0.0 0 0. 0
1.1930 0.9375 -0.32 0.14 2.17 2.40 0.13 3.46 3.23 0.07 0.04
1.98
0. 0 . - . .5 55.0 .0 0. .0 .0 . 0 0. 0 . .5 0.0 0 0.
1.1930 0.9375 -0.32 0.14 2.17 2.40 0.03 3.46 3.31 0.07 0.04
2.01
0. 0 . - . .5 55.0 .0 . .0 .0 . 0 0. 0 . .5 0.0 0 0. 5
1.1930 0.9375 -0.32 0.14 2.17 2.40 0.13 3.50 3.27 0.07 0.04
2.10
. 0 .0 0 - . .5 5 .5 .0 . .0 .0 . 0 . 0 . . 0. 0 0.
1.1563 0.9063 -0.15 0.14 2.26 2.60 0.13 3.58 3.19 0.09 0.11
2.12
. 5. 5 - .0 0. 55.0 5 .0 0. .0 .0 . 0 .00 5. 0.0 5 0.
0.8640 0.6250 -0.12 0.03 2.17 2.20 0.03 3.62 3.50 0.04 0.08
1.60
0. 0 . - . .5 55.0 .0 . 0.0 .0 . 0 0. 0 . .5 0.0 0 .0
1.1930 0.9375 -0.32 0.14 2.17 2.40 0.13 3.54 3.31 0.07 0.04
2.30
.0 . - . .5 55.0 .0 . .0 .0 . 0 . 0 5 . . 0.0 . 5
1.4200 1.0625 -0.50 0.14 2.17 2.44 0.13 3.70 3.46 0.11 0.07
2.75
. 50 5. 00 - . .5 5 .0 .0 . .0 .0 . 0 . 0 . . 0.0 .
1.2500 1.0000 -0.28 0.14 2.20 2.48 0.13 3.78 3.46 0.09 0.05
2.60
.0 . - . .5 55.0 .0 . 5.0 .0 . 0 . 0 5 . . 0.0 . 0
1.4200 1.0625 -0.50 0.14 2.17 2.44 0.13 3.74 3.50 0.11 0.07
2.86
. 50 .5 5 - . .5 5 .0 .0 . .0 .0 . 0 . 0 . . 0.0 . 5
1.2500 1.1250 -0.28 0.14 2.20 2.48 0.13 3.78 3.43 0.09 0.05
2.76
.0 . - . .5 55.0 5 .0 . 5.0 .0 . 0 . 0 5 . . 0.0 . 0
1.4200 1.0625 -0.50 0.06 2.17 2.28 0.13 3.74 3.50 0.11 0.07
2.88
.0 . - . .0 55.0 0.0 . 5.0 .0 . 0 . 0 5 . . 0.0 .
1.4200 1.0625 -0.50 0.31 2.17 2.76 0.13 3.74 3.50 0.11 0.07
2.79
. 5 .5 - .0 . 5 .0 0.0 . .0 .0 . 0 0. 0 . 5.5 0.0 5 .
1.7510 1.4375 -0.63 0.05 2.28 2.36 0.13 3.82 3.50 0.10 0.04
3.89
. 5 .5 - .0 .5 5 .0 5.0 . .0 .0 . 0 0. 0 . 5.5 0.0 5 .
1.7510 1.4375 -0.63 0.14 2.28 2.56 0.13 3.82 3.50 0.10 0.04
3.88
0. 5 . - . .5 5 .0 .0 . .0 .0 . 0 . 0 .5 . 0.0 .
1.2188 0.9375 -0.32 0.14 2.24 2.48 0.13 3.90 3.66 0.08 0.07
2.79
0. 5 . - . .5 5 .0 .0 0. .0 5.0 . 0 . 0 .5 . 0.0 .
1.2188 0.9375 -0.32 0.14 2.24 2.48 0.03 3.90 3.74 0.08 0.07
2.80
.5 .5 5 - . .5 5 .0 5.0 . .0 .0 . 0 . 0 5 . . 0.0 .
1.4375 1.1250 -0.38 0.14 2.32 2.56 0.13 3.90 3.62 0.14 0.05
3.25
.5 .5 5 - . .5 5 .0 .0 . .0 .0 . 0 . 0 5 . . 0.0 .
1.4375 1.1250 -0.38 0.06 2.32 2.40 0.13 3.90 3.62 0.14 0.05
3.26
. . 5 - . 0. 5 .0 5 .0 0. 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 0.8750 -0.28 0.03 2.20 2.24 0.03 3.94 3.82 0.09 0.05
2.84
. 5 .5 5 - . .5 5 .0 .0 . 00.0 .0 . 0 0. 0 . . 0.0 .5
1.4550 1.1250 -0.48 0.14 2.20 2.44 0.13 3.94 3.70 0.11 0.04
3.51
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 5 0 . . 5 5 000 0. 0 . 000 00 . 5 0 000 5 5
1.8750 4.2900 1.3750 35500 9210 6340 45400
. 5 0 . . 5 5 000 0. 0 . 000 00 . 5 0 000 5 5
1.8750 4.2900 1.3750 35500 9210 6340 45400
. 5 . 5 0. 000 0. 0. 0 00 00 0. 000 55 C 55
1.8750 4.3750 1.1875 26500 6880 10400 36200
. 5 . 5 0. 000 0. 0. 500 00 0. 5 000 HM 0 HM 0
1.8750 4.3750 1.1875 25600 6640 10000 34400
. 5 . 5 . 00 5 000 0. 0 .0 00 000 . 0 000 5 5
1.8750 4.3750 1.5000 35800 9290 4720 46200
. 5 . 0. 500 0. 0. 5500 00 0. 000 55 55
1.8750 4.4375 1.1875 22100 5740 8690 26700
. 5 . 0. 000 0. 0. 0 00 00 0. 000 55 C 55
1.8750 4.4375 1.1875 26500 6880 10400 36200
. 5 . 0. 000 0. 0. 500 00 0. 5 000 HM 0 HM 0
1.8750 4.4375 1.1875 25600 6640 10000 34400
. 5 . 5 . 000 0. 0. 5 00 00 0. 000
1.8750 4.6250 1.3125 31000 8040 8620 37300
. 5 0. 50 . 5 000 0. . 00 00 . 000
1.8750 4.7500 1.6250 43200 11200 6020 54800
. 5 . 5 .5 5 000 0. 0. 00 50000 0. 5000
1.8750 4.8750 1.4375 34400 8910 11200 39400
. 5 . 5 .5 000 0. 0. 00 5 00 0. 0 000 C
1.8750 4.8750 1.4375 37600 9760 12300 46800
. 5 . 5 .5 000 0. 0. 00 5 00 0. 0 000 C
1.8750 4.8750 1.4375 37600 9760 12300 46800
. 5. 50 0. 5000 0.55 . 0 00 00 .0 5 000 HM 0 A HM 0 0
1.9060 3.7500 1.1875 25900 6710 6280 35400
. 5. 50 0. 5000 0.55 . 0 00 00 .0 5 000 HM 0 HM 0 0
1.9060 3.7500 1.1875 25900 6710 6280 35400
. 5. 50 0. 5000 0.55 . 0 00 00 .0 5 000 HM 0 HM 0 0
1.9060 3.7500 1.1875 25900 6710 6280 35400
. 00 .000 .500 5 00 0. . 500 0 00 . 0 000 JLM 0 A JLM 0
1.9134 3.4646 0.8465 16900 4390 2290 23400
. . 00 0. 500 0. . 0 00 00 . 5 00 5-S A
1.9375 3.5000 0.8125 17900 4640 2540 21500
. 0.000 5.000 500 0. . 0 00 00 . 5 00 5-S X
1.9375 3.5433 0.9843 17900 4640 2540 21500
. . 0. 000 0. . 00 000 . 5 000 0
1.9375 3.6718 1.1875 25400 6590 3820 34300
. 0 . . 5 000 0. 0 .0 5 000 5 00 . 000 5 5 5 5
1.9375 4.0625 1.7188 44200 11500 5820 60100
. 0 . 5 .5 5 000 0. . 00 00 . 0 000 HM 0 0 HM 0 0 0
1.9375 4.1250 1.4375 35700 9260 7730 50200
. . 00 . 50 0 000 0. . 5 00 500 . 5 000 5 0 5 0
1.9375 4.5000 1.7500 46500 12100 8880 57500
. . 00 . 50 000 0. 0 . 5 000 0 00 . 5 0000 HH50 HH50 0
1.9375 4.5000 1.7500 51200 13300 9130 65100
. . 00 . 50 000 0. 0 . 5 000 0 00 . 5 0000 HH50 HH50
1.9375 4.5000 1.7500 51200 13300 9130 65100
. . . 5 000 0. . 5 00 00 . 000 55 55 5
1.9375 4.8125 1.7188 49200 12800 7830 73500
. 5 . 5 0. 500 0. 0. 5500 00 0. 000 55 55
1.9675 4.3750 1.1875 22100 5740 8690 26700
. 0 . 50 .5 5 000 0. 0 .0 00 000 . 0 000 5 5 X
1.9678 4.2500 1.4375 35800 9290 4720 46200
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.5 . - . .5 5 .0 5.0 . 0 .0 .0 . 0 . 0 5 . . 0.0 .5
1.4375 1.0625 -0.38 0.14 2.32 2.56 0.13 3.98 3.66 0.14 0.05
3.49
.5 . - . .5 5 .0 .0 . 0 .0 .0 . 0 . 0 5 . . 0.0 .5
1.4375 1.0625 -0.38 0.06 2.32 2.40 0.13 3.98 3.66 0.14 0.05
3.51
. 0 0. . .5 .0 .0 . 05.0 .0 5.00 . 0 . 5. 0. .
1.0594 0.8125 0.30 0.14 2.44 2.72 0.13 4.13 3.62 0.20 0.14
3.07
.5 5 0. . .5 5.0 .0 . 05.0 .0 . 0 .00 . . 0. . 0
1.1250 0.8125 0.30 0.14 2.56 2.83 0.13 4.13 3.58 0.18 0.08
3.08
. 5 . - . .5 5 .0 .0 . 00.0 5.0 . 0 0. 0 . . 0.0 .
1.4550 1.3125 -0.48 0.14 2.20 2.44 0.13 3.94 3.74 0.11 0.04
4.01
. 0 0. . .5 .0 .0 . 0 .0 .0 . 0 . 0 . . 0. 0 5 . 5
1.0594 0.8125 0.28 0.14 2.44 2.72 0.13 4.17 3.62 0.19 0.13
2.98
. 0 0. . .5 .0 .0 . 0 .0 .0 5.00 . 0 . 5. 0. .
1.0594 0.8125 0.30 0.14 2.44 2.72 0.13 4.17 3.62 0.20 0.14
3.17
.5 5 0. . .5 5.0 .0 . 0 .0 .0 . 0 .00 . . 0. .
1.1250 0.8125 0.30 0.14 2.56 2.83 0.13 4.17 3.58 0.18 0.08
3.22
. 50 . -0. .5 .0 .0 . .0 00.0 5.00 .00 50. . 0.0 5 . 0
1.2500 0.9375 -0.01 0.14 2.44 2.72 0.13 4.37 3.94 0.20 0.08
3.74
. 5 . 50 - .0 .5 5 .0 5.0 . 0.0 05.0 . 0 . 0 5. . 0.0 . 5
1.6250 1.2500 -0.55 0.14 2.28 2.56 0.13 4.33 4.13 0.15 0.07
5.18
. 5. 00 . .5 .0 .0 . .0 0 .0 5. 0 .00 . . 0.0 .05
1.2910 1.0000 0.05 0.14 2.59 2.83 0.13 4.57 4.02 0.21 0.16
4.52
. 5. 00 .0 .5 .0 5.0 . .0 0 .0 . 0 . 0 5 . .5 0.0 5 . 5
1.2910 1.0000 0.08 0.14 2.60 2.95 0.13 4.57 4.02 0.19 0.17
4.74
. 5. 00 .0 0. .0 .0 . .0 0 .0 . 0 . 0 5 . .5 0.0 5 .
1.2910 1.0000 0.08 0.03 2.64 2.72 0.13 4.57 4.02 0.19 0.17
4.80
. 0 .0 0 - . . 5 .5 .0 . .0 .0 . 0 . 0 . . 0. 0 0. 5
1.1563 0.9063 -0.15 0.09 2.26 2.48 0.13 3.58 3.19 0.09 0.11
2.10
. 0 .0 0 - . . 5 .5 .0 . .0 .0 . 0 . 0 . . 0. 0 0. 5
1.1563 0.9063 -0.15 0.09 2.26 2.48 0.13 3.58 3.19 0.09 0.11
2.10
. 0 .0 0 - . .5 5 .5 .0 . .0 .0 . 0 . 0 . . 0. 0 0. 5
1.1563 0.9063 -0.15 0.14 2.26 2.60 0.13 3.58 3.19 0.09 0.11
2.09
.500 .000 -5. 0. 55.0 5 .0 0. .0 .0 0. 0 . 0 . . 0.0 0 0.5
0.8465 0.6693 -0.21 0.02 2.17 2.13 0.03 3.19 3.07 0.03 0.08
1.23
. 5 .5 - . 0. 5 .0 55.0 . .0 .0 0.50 .00 . 0.0 0.5
0.8750 0.6501 -0.17 0.03 2.13 2.17 0.05 3.31 3.19 0.02 0.04
1.17
. 5 0.000 - . 0. 5 .0 55.0 .0 .0 0.0 0.50 .00 . 0.0 0.
0.8750 0.7874 -0.17 0.03 2.13 2.17 0.08 3.31 3.15 0.02 0.04
1.36
0. 0 . - . .5 5 .0 .0 . .0 .0 . 0 0. 0 . .5 0.0 0 0.
1.1930 0.9375 -0.32 0.14 2.20 2.44 0.13 3.46 3.23 0.07 0.04
1.92
. 5 .5 - .0 .5 0.0 .0 . .0 .0 . 0 0. 0 . 5.5 0.0 5 .
1.7510 1.4375 -0.63 0.14 2.36 2.60 0.13 3.82 3.50 0.10 0.04
3.78
.5 .5 5 - . .5 .0 .0 . 00.0 .0 . 0 . 0 . . 0.0 0 .
1.4375 1.1250 -0.29 0.14 2.48 2.72 0.13 3.94 3.50 0.14 0.08
3.29
. 50 . 5 - . .5 0.0 0.0 . 0 .0 .0 . 0 .00 . 0. 05 .
1.7500 1.3750 -0.49 0.14 2.36 2.76 0.13 4.21 3.82 0.14 0.04
4.81
. 50 .0 - .5 .5 .0 .0 . 0 .0 .0 . 0 . 0 5. 0. 0 .
1.7500 1.4200 -0.53 0.14 2.40 2.80 0.13 4.21 3.82 0.11 0.13
4.97
. 50 .0 - .5 .5 .0 .0 0. 0 .0 .0 . 0 . 0 5. 0. 0 .
1.7500 1.4200 -0.53 0.14 2.40 2.80 0.03 4.21 3.90 0.11 0.13
5.00
. .5 - . . .0 5.0 . .0 0 .0 .50 . 0 0 . 0.0 5 .
1.7230 1.4375 -0.48 0.05 2.48 2.56 0.13 4.57 4.17 0.10 0.05
6.02
. 0 0. . .5 .0 .0 . 05.0 .0 . 0 . 0 . . 0. 0 5 .
1.0594 0.8125 0.28 0.14 2.51 2.80 0.13 4.13 3.62 0.19 0.13
2.80
. 5 .5 5 - . .5 5 .0 5.0 . 00.0 .0 . 0 0. 0 . . 0.0 .5
1.4550 1.1250 -0.48 0.14 2.28 2.56 0.13 3.94 3.70 0.11 0.04
3.40
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. . . 5 5 00 0. . 00 0 . 00 L 05 L 05
1.9680 3.1486 0.7188 12700 3280 2000 20000
. 0. . 5 5 00 0. . 00 0 . 00 L 05 L 05 0
1.9680 3.1875 0.7188 12700 3280 2000 20000
. .000 . 5 00 0. . 500 0 00 . 0 000 LM 0 A JLM 0 0
1.9680 3.2283 0.8652 16900 4390 2290 23400
. . 0 . 50 00 0. .5 00 5 00 .55 0000 5 5 0
1.9680 3.5425 0.9744 20600 5340 3450 29200
. .0 5 . 0 00 0. .5 00 5 00 .55 0000 5 5
1.9680 3.6250 0.9688 20600 5340 3450 29200
. . . 5 00 0. . 00 00 . 0 000 A A
1.9680 3.8125 0.8750 18300 4750 2750 22700
. . 00 . 50 000 0. 0 . 5 000 0 00 . 5 0000 HH50 HH50
1.9680 4.5000 1.7500 51200 13300 9130 65100
50.000 0.000 0.000 00 0. . 00 00 . 00 XAA 0 0X Y 0 0X
1.9685 3.1496 0.7874 14500 3770 2730 20800
50.000 0.000 0.000 00 0. . 00 00 . 00 XAB- 0 0X Y 0 0X
1.9685 3.1496 0.7874 14500 3770 2730 20800
50.000 0.000 0.000 00 0. . 00 00 . 00 XAD 0 0X Y 0 0X
1.9685 3.1496 0.7874 14500 3770 2730 20800
50.000 0.000 0.000 00 0. . 00 00 . 00 XAE 0 0X Y 0 0X
1.9685 3.1496 0.7874 14500 3770 2730 20800
50.000 .000 .500 5 00 0. . 500 0 00 . 0 000 JLM 0 JLM 0 0
1.9685 3.2283 0.8465 16900 4390 2290 23400
50.000 .000 .500 00 0. . 00 00 . 00 XAB- 0 0X YKB- 0 0X
1.9685 3.2283 0.8465 14500 3770 2730 20800
50.000 .550 . 0 5 00 0. . 500 0 00 . 0 000 JLM 0 LM 0
1.9685 3.2500 0.8313 16900 4390 2290 23400
50.000 .550 . 50 5 00 0. . 500 0 00 . 0 000 JLM 0 LM 0 A
1.9685 3.2500 0.9113 16900 4390 2290 23400
50.000 . . 0 5 00 0. . 500 0 00 . 0 000 JLM 0 LM 0
1.9685 3.2650 0.8313 16900 4390 2290 23400
50.000 .000 .000 5 00 0. . 500 00 . 0 000 JLM 0 JLM 0 0
1.9685 3.3071 0.8661 16900 4390 3290 23500
50.000 . 00 0. 500 0. . 0 00 00 . 5 00 5 A
1.9685 3.5000 0.8125 17900 4640 2540 21500
50.000 . 00 0. 500 0. . 0 00 00 . 5 00 A
1.9685 3.5000 0.8125 17900 4640 2540 21500
50.000 0.000 0.000 500 0. . 0 00 00 . 5 00 5
1.9685 3.5433 0.7874 17900 4640 2540 21500
50.000 0.000 0.000 500 0. . 0 00 00 . 5 00 5
1.9685 3.5433 0.7874 17900 4640 2540 21500
50.000 0.000 0.000 500 0. . 0 00 00 . 5 00
1.9685 3.5433 0.7874 17900 4640 2540 21500
50.000 0.000 0.000 500 0. . 0 00 00 . 5 00
1.9685 3.5433 0.7874 17900 4640 2540 21500
50.000 0.000 .000 5000 0. . 00 00 . 5 000 JM 05 A JM 05 0
1.9685 3.5433 1.1024 25700 6670 3760 34600
50.000 0.000 .000 5000 0. . 00 00 . 5 000 JM 05 AS JM 05 0
1.9685 3.5433 1.1024 25700 6670 3760 34600
50.000 0.000 .000 5000 0. . 00 00 . 5 000 JM 05 JM 05 0
1.9685 3.5433 1.1024 25700 6670 3760 34600
50.000 0.000 .000 5000 0. . 00 00 . 5 000 JM 05 JM 05 0A
1.9685 3.5433 1.1024 25700 6670 3760 34600
50.000 00.000 .500 50000 0. 0 .50 00 00 . 0 000 XLA Y
1.9685 3.9370 1.3189 33700 8750 5980 45300
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 5 . - .5 .5 55.0 5 .0 .5 .0 .0 0. 0 . 0 . . 0.0 0.
0.7188 0.5625 -0.10 0.06 2.17 2.24 0.06 2.99 2.87 0.01 0.08
0.76
. 5 . - .5 .5 55.0 5 .0 .5 .0 .0 0. 0 . 0 . . 0.0 0.
0.7188 0.5625 -0.10 0.06 2.17 2.24 0.06 3.03 2.87 0.01 0.08
0.79
. 5 .000 -5. 0.5 55.0 55.0 0.5 .0 .0 . 0 .00 . . 0.0 0 0.
0.8750 0.6693 -0.23 0.02 2.17 2.17 0.02 3.07 2.99 0.05 0.08
0.97
5. 00 . - . . 5 .0 0.0 . .0 .0 . 0 .00 . . 0.0 0.
1.0000 0.7869 -0.19 0.09 2.20 2.36 0.09 3.39 3.19 0.06 0.04
1.47
5. 00 . 5 - . . 5 .0 0.0 0. .0 .0 . 0 .00 . . 0.0 0.
1.0000 0.7813 -0.19 0.09 2.20 2.36 0.03 3.43 3.27 0.06 0.04
1.57
. 5 .050 - . . 5 .0 0.0 .5 0.0 .0 0. 0 . 0 . 5. 0.0 0.
0.8750 0.7500 -0.15 0.09 2.20 2.36 0.06 3.54 3.39 0.03 0.06
1.60
. 50 .0 - .5 .5 .0 .0 0. 0 .0 .0 . 0 . 0 5. 0. 0 . 5
1.7500 1.4200 -0.53 0.14 2.40 2.83 0.03 4.21 3.90 0.11 0.13
4.96
0.000 5.500 - .0 . 5 .0 0.0 .0 .0 .0 0. 0 . 0 0. 0.0 5 0.
0.7874 0.6102 -0.08 0.09 2.20 2.36 0.04 3.03 2.87 0.04 0.08
0.82
0.000 5.500 - .0 .0 55.0 .0 .0 .0 .0 0. 0 . 0 0. 0.0 5 0.
0.7874 0.6102 -0.08 0.12 2.17 2.44 0.04 3.03 2.87 0.04 0.08
0.82
0.000 5.500 - .0 .5 5 .0 5 .0 .0 .0 .0 0. 0 . 0 0. 0.0 5 0.
0.7874 0.6102 -0.08 0.06 2.20 2.32 0.04 3.03 2.87 0.04 0.08
0.82
0.000 5.500 - .0 0. 55.0 5 .0 .0 .0 .0 0. 0 . 0 0. 0.0 5 0.
0.7874 0.6102 -0.08 0.01 2.17 2.20 0.04 3.03 2.87 0.04 0.08
0.82
.500 .000 -5. .0 55.0 0.0 0.5 .0 .0 0. 0 . 0 . . 0.0 0 0.
0.8465 0.6693 -0.21 0.12 2.17 2.36 0.02 3.07 2.99 0.03 0.08
0.94
0.000 .000 - .0 .0 55.0 .0 0.5 .0 .0 0. 0 . 0 0. 0.0 5 0.
0.7874 0.6693 -0.08 0.12 2.17 2.44 0.02 3.03 2.99 0.04 0.08
0.93
.500 .5 0 -5. .0 55.0 0.0 . .0 5.0 0. 0 . 0 . . 0.0 0 0.
0.8465 0.6500 -0.21 0.12 2.17 2.36 0.05 3.07 2.95 0.03 0.08
0.95
.500 .5 -5. .0 55.0 0.0 0. .0 5.0 0. 0 . 0 . . 0.0 0 0. 5
0.8465 0.7300 -0.21 0.12 2.17 2.36 0.03 3.07 2.95 0.03 0.08
1.00
.500 .5 0 -5. .0 55.0 0.0 . .5 5.0 0. 0 . 0 . . 0.0 0 0.
0.8465 0.6500 -0.21 0.12 2.17 2.36 0.05 3.06 2.95 0.03 0.08
0.96
.000 .500 - . .5 5 .0 .0 .5 0.0 .0 . 0 . 0 5. . 0.0 0.
0.8661 0.6890 -0.09 0.14 2.20 2.52 0.06 3.15 2.99 0.04 0.06
1.03
. 5 .5 - . .0 55.0 5 .0 . .0 .0 0.50 .00 . 0.0 0.5
0.8750 0.6501 -0.17 0.08 2.17 2.28 0.05 3.31 3.19 0.02 0.04
1.14
. 5 .5 - . . 55.0 5 .0 . .0 .0 0.50 .00 . 0.0 0.5
0.8750 0.6501 -0.17 0.09 2.17 2.32 0.05 3.31 3.19 0.02 0.04
1.14
. 5 5. 5 - . .0 55.0 5 .0 .0 .0 .0 0.50 .00 . 0.0 0.5
0.8750 0.6250 -0.17 0.08 2.17 2.28 0.08 3.31 3.19 0.02 0.04
1.16
. 5 0.000 - . .0 55.0 5 .0 0. 5.0 .0 0.50 .00 . 0.0 0.5
0.8750 0.7874 -0.17 0.08 2.17 2.28 0.03 3.34 3.23 0.02 0.04
1.24
. 5 5. 5 - . . 55.0 5 .0 .0 .0 .0 0.50 .00 . 0.0 0.5
0.8750 0.6250 -0.17 0.09 2.17 2.32 0.08 3.31 3.19 0.02 0.04
1.16
. 5 0.000 - . . 55.0 5 .0 0. 5.0 .0 0.50 .00 . 0.0 0.5
0.8750 0.7874 -0.17 0.09 2.17 2.32 0.03 3.34 3.23 0.02 0.04
1.24
.000 .000 - . 5.0 5 .0 .0 .5 5.0 0.0 0. 0 . 0 . . 0.0 5 0.
1.1024 0.9055 -0.30 0.20 2.24 2.64 0.10 3.35 3.15 0.03 0.09
1.63
.000 .000 - . .5 5 .0 .0 .5 5.0 0.0 0. 0 . 0 . . 0.0 5 0.
1.1024 0.9055 -0.30 0.10 2.24 2.48 0.10 3.35 3.15 0.03 0.09
1.64
.000 .000 - . .0 5 .0 .0 .5 5.0 0.0 0. 0 . 0 . . 0.0 5 0.
1.1024 0.9055 -0.30 0.12 2.24 2.48 0.10 3.35 3.15 0.03 0.09
1.64
.000 .000 - . .0 5 .0 .0 0. 5.0 .0 0. 0 . 0 . . 0.0 5 0.
1.1024 0.9055 -0.30 0.12 2.24 2.48 0.03 3.35 3.19 0.03 0.09
1.64
.500 .000 - . .0 .0 .0 .5 .0 .0 . 0 . 0 5 . 5. 0. 0 0 .
1.3189 1.0630 -0.32 0.08 2.44 2.64 0.06 3.78 3.50 0.05 0.11
2.73
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
50.000 05.000 .000 000 0. 0. 00 500 0. 000 JW50 JW50 0
1.9685 4.1339 1.2598 24900 6440 9560 31000
50.000 05.000 .000 5 000 0. . 00 00 . 0 000 JHM 0 0 5 JHM 0 0
1.9685 4.1339 1.4567 35700 9260 7730 50200
50. 00 . . 00 00 0. . 0 5 0 . 00 LL 05 LL 05 0
2.0000 3.0625 0.5000 7770 2010 1160 10600
50. 00 0. . 5 5 00 0. . 00 0 . 00 L 05 L 05 0
2.0000 3.1875 0.7188 12700 3280 2000 20000
50. 00 .000 . 5 00 0. . 500 0 00 . 0 000 LM 0 JLM 0 0
2.0000 3.2283 0.8652 16900 4390 2290 23400
50. 00 .550 .5 0 5 00 0. . 500 0 00 . 0 000 LM 0 LM 0
2.0000 3.2500 0.8500 16900 4390 2290 23400
50. 00 .550 . 5 00 0. . 500 0 00 . 0 000 LM 0 LM 0 A
2.0000 3.2500 0.9300 16900 4390 2290 23400
50. 00 . .5 0 5 00 0. . 500 0 00 . 0 000 LM 0 LM 0
2.0000 3.2650 0.8500 16900 4390 2290 23400
50. 00 . . 50 00 0. . 00 0 . 500 0
2.0000 3.2800 0.6875 11400 2950 2050 15200
50. 00 5.000 . 50 00 0. . 00 0 . 500 0 0
2.0000 3.3465 0.6875 11400 2950 2050 15200
50. 00 5. 5 .050 00 0.5 .0 00 000 .0 00 00
2.0000 3.3750 0.7500 10700 2780 2710 14400
50. 00 . 00 . 50 00 0. . 00 0 . 500 0
2.0000 3.5000 0.6875 11400 2950 2050 15200
50. 00 . 00 0. 50 00 0. . 00 0 . 500 0
2.0000 3.5000 0.8125 11400 2950 2050 15200
50. 00 . 00 0. 500 0. . 0 00 00 . 5 00 A
2.0000 3.5000 0.8125 17900 4640 2540 21500
50. 00 . 00 0. 500 0. . 0 00 00 . 5 00 A A
2.0000 3.5000 0.8125 17900 4640 2540 21500
50. 00 . 00 0. 500 0. . 0 00 00 . 5 00 0A A
2.0000 3.5000 0.8125 17900 4640 2540 21500
50. 00 . 00 . 500 0. . 0 00 00 . 5 00 A AX
2.0000 3.5000 0.9375 17900 4640 2540 21500
50. 00 . 0 . 50 00 0. .5 00 5 00 .55 0000 5 0 5 0
2.0000 3.5425 0.9744 20600 5340 3450 29200
50. 00 0.000 0.000 500 0. . 0 00 00 . 5 00
2.0000 3.5433 0.7874 17900 4640 2540 21500
50. 00 0.000 0.000 500 0. . 0 00 00 . 5 00
2.0000 3.5433 0.7874 17900 4640 2540 21500
50. 00 0.000 0.000 500 0. . 0 00 00 . 5 00 A
2.0000 3.5433 0.7874 17900 4640 2540 21500
50. 00 0.000 0.000 500 0. . 0 00 00 . 5 00 0A
2.0000 3.5433 0.7874 17900 4640 2540 21500
50. 00 .0 5 . 0 00 0. .5 00 5 00 .55 0000 5 0 5
2.0000 3.6250 0.9688 20600 5340 3450 29200
50. 00 .0 5 . 0 00 0. .5 00 5 00 .55 0000 5 0 5
2.0000 3.6250 1.0937 20600 5340 3450 29200
50. 00 . 0. 00 0. . 00 00 . 0 000 5
2.0000 3.6718 0.8125 18300 4750 2750 22700
50. 00 . 0. 00 0. . 00 00 . 0 000 5-S
2.0000 3.6718 0.8125 18300 4750 2750 22700
50. 00 . . 00 0. . 00 00 . 0 000 5 0
2.0000 3.6718 1.0625 18300 4750 2750 22700
50. 00 . . 00 0. . 00 00 . 0 000 5 0
2.0000 3.6718 1.0625 18300 4750 2750 22700
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.000 .000 . .0 0.0 .0 .0 00.0 .0 . 0 . 0 . 0. 05 .
1.1417 0.8661 0.17 0.12 2.36 2.99 0.12 3.94 3.39 0.19 0.14
2.72
.000 .000 - . .0 .0 .0 .5 00.0 0.0 . 0 . 0 . . 0.0 0 .
1.4173 1.1417 -0.30 0.12 2.48 2.72 0.10 3.94 3.54 0.14 0.10
3.28
. 00 .5 5 0.0 .5 55.0 5 .0 .5 .0 .0 0. 0 . 0 . . 0.0 0. 0
0.5000 0.3750 0.00 0.06 2.17 2.24 0.06 2.91 2.80 0.01 0.07
0.45
. 5 . - .5 .5 5 .0 5 .0 .5 .0 .0 0. 0 . 0 . . 0.0 0. 5
0.7188 0.5625 -0.10 0.06 2.20 2.28 0.06 3.03 2.87 0.01 0.08
0.77
. 5 .000 -5. .5 5 .0 .0 0.5 .0 .0 . 0 .00 . . 0.0 0 0.
0.8750 0.6693 -0.23 0.14 2.20 2.48 0.02 3.07 2.99 0.05 0.08
0.93
. 5 .5 0 -5. .5 5 .0 .0 . .0 5.0 . 0 .00 . . 0.0 0 0.
0.8750 0.6500 -0.23 0.14 2.20 2.48 0.05 3.07 2.95 0.05 0.08
0.93
. 5 .5 -5. .5 5 .0 .0 0. .0 5.0 . 0 .00 . . 0.0 0 0. 5
0.8750 0.7300 -0.23 0.14 2.20 2.48 0.03 3.07 2.95 0.05 0.08
0.99
. 5 .5 0 -5. .5 5 .0 .0 . .5 5.0 . 0 .00 . . 0.0 0 0.
0.8750 0.6500 -0.23 0.14 2.20 2.48 0.05 3.06 2.95 0.05 0.08
0.95
. . 5 -0. .5 5 .0 .0 0. .0 .0 0. 0 .50 . .5 0.0 0.
0.6875 0.5313 -0.03 0.14 2.20 2.44 0.03 3.11 3.03 0.03 0.06
0.76
. . 5 -0. .5 5 .0 .0 .5 0.0 .0 0. 0 .50 . .5 0.0 0.
0.6875 0.5313 -0.03 0.14 2.20 2.44 0.06 3.15 3.03 0.03 0.06
0.81
. . 00 .0 .5 5 .0 5 .0 .5 .0 .0 * * . 0. 0.0 5 0. 0
0.7190 0.5000 0.08 0.06 2.20 2.32 0.06 3.19 2.99 * *
0.88
. . 5 -0. .5 5 .0 .0 . .0 .0 0. 0 .50 . .5 0.0 0.
0.6875 0.5313 -0.03 0.14 2.20 2.44 0.05 3.23 3.07 0.03 0.06
0.93
. . 0 -0. .5 5 .0 .0 . .0 .0 0. 0 .50 . .5 0.0 0.
0.6875 0.6563 -0.03 0.14 2.20 2.44 0.05 3.23 3.07 0.03 0.06
1.06
. 5 .5 - . .5 5 .0 5 .0 . .0 .0 0.50 .00 . 0.0 0.5
0.8750 0.6501 -0.17 0.06 2.20 2.28 0.05 3.31 3.19 0.02 0.04
1.12
. 5 .5 - . .5 5 .0 .0 . .0 .0 0. 0 . 0 . . 0.0 0.50
0.8750 0.6501 -0.17 0.14 2.20 2.44 0.05 3.31 3.19 0.02 0.04
1.10
. 5 .5 - . 5.0 5 .0 5.0 . .0 .0 0.50 .00 . 0.0 0.
0.8750 0.6501 -0.17 0.20 2.20 2.56 0.05 3.31 3.19 0.02 0.04
1.08
. 5 . - . .5 5 .0 .0 . .0 0.0 0. 0 . 0 . . 0.0 0.55
0.8750 0.7751 -0.17 0.14 2.20 2.44 0.05 3.31 3.15 0.02 0.04
1.21
5. 00 . - . .5 5 .0 .0 . .0 .0 . 0 .00 . . 0.0 0.
1.0000 0.7869 -0.19 0.14 2.24 2.48 0.09 3.39 3.19 0.06 0.04
1.45
. 5 5. 5 - . .5 5 .0 5 .0 .0 .0 .0 0.50 .00 . 0.0 0.5
0.8750 0.6250 -0.17 0.06 2.20 2.28 0.08 3.31 3.19 0.02 0.04
1.14
. 5 0.000 - . .5 5 .0 5 .0 0. 5.0 .0 0.50 .00 . 0.0 0.55
0.8750 0.7874 -0.17 0.06 2.20 2.28 0.03 3.34 3.23 0.02 0.04
1.21
. 5 5. 5 - . .5 5 .0 .0 .0 .0 .0 0. 0 . 0 . . 0.0 0.5
0.8750 0.6250 -0.17 0.14 2.20 2.44 0.08 3.31 3.19 0.02 0.04
1.12
. 5 5. 5 - . 5.0 5 .0 5.0 .0 .0 .0 0.50 .00 . 0.0 0.50
0.8750 0.6250 -0.17 0.20 2.20 2.56 0.08 3.31 3.19 0.02 0.04
1.10
5. 00 . 5 - . .5 5 .0 .0 0. .0 .0 . 0 .00 . . 0.0 0.
1.0000 0.7813 -0.19 0.14 2.24 2.48 0.03 3.43 3.27 0.06 0.04
1.56
5. 00 .0 - . .5 5 .0 .0 . .0 .0 . 0 .00 . . 0.0 0.
1.0000 0.9062 -0.19 0.14 2.24 2.48 0.09 3.43 3.19 0.06 0.04
1.67
. 5 5.0 - . . 5 .0 0.0 . .0 5.0 0. 0 . 0 . 5. 0.0 0.5
0.8750 0.5938 -0.15 0.09 2.24 2.36 0.05 3.46 3.35 0.03 0.06
1.31
. 5 5.0 - . .5 5 .0 .0 . .0 5.0 0. 0 . 0 . 5. 0.0 0.5
0.8750 0.5938 -0.15 0.14 2.24 2.48 0.05 3.46 3.35 0.03 0.06
1.30
. 5 . - . . 5 .0 0.0 . .0 .0 0. 0 . 0 . 5. 0.0 0. 0
0.8750 0.9375 -0.15 0.09 2.24 2.36 0.13 3.46 3.23 0.03 0.06
1.55
. 5 . - . . 5 .0 0.0 0. .0 .0 0. 0 . 0 . 5. 0.0 0.
0.8750 0.9375 -0.15 0.09 2.24 2.36 0.03 3.46 3.31 0.03 0.06
1.58
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
50. 00 . 0. 000 0. . 00 000 . 5 000
5 0
0 0
0 0
0
0
5A A
5 A
5-S A
5A -S
5A
0
5A A
5
5A X
5 5 0X
5 X 5 0X
5 X J5 0
5 5 5 0
5 5 5
5 5
5 X 5
5 5 0
5 5
5 5 5 0
5 5 5
2.0000 3.6718 1.1875 25400 6590 3820 34300
50. 00 . 0. 000 0. . 00 000 . 5 000
B
Caption:
2.0000 3.6718 1.1875 25400 6590 3820 34300
50. 00 . 0. 000 0. . 00 000 . 5 000
2.0000 3.6718 1.1875 25400 6590 3820 34300
50. 00 . 0. 000 0. . 00 000 . 5 000
2.0000 3.6718 1.1875 25400 6590 3820 34300
50. 00 . 0. 000 0. . 00 000 . 5 000
2.0000 3.6875 1.1875 25400 6590 3820 34300
50. 00 5. 50 . 0000 0. . 00 00 . 000
Caption:
2.0000 3.7500 1.0938 27000 7000 3950 36200
50. 00 5. 50 . 0000 0. . 00 00 . 000
2.0000 3.7500 1.0938 27000 7000 3950 36200
50. 00 5. 50 0. 000 0. . 00 000 . 5 000
2.0000 3.7500 1.1875 25400 6590 3820 34300
50. 00 . .000 00 0. 5 . 00 00 . 5 0 000
T
C
2.0000 3.8125 0.8268 18900 4910 2980 24100
50. 00 . . 5 00 0. . 00 00 . 0 000
2.0000 3.8125 0.8750 18300 4750 2750 22700
50. 00 . . 5 00 0. . 00 00 . 0 000
D
2.0000 3.8125 0.8750 18300 4750 2750 22700
50. 00 . 5. 00 00 0. 5 . 00 00 . 5 0 000
B
d
2.0000 3.8125 1.0000 18900 4910 2980 24100
50. 00 . 5 .000 00 0. 5 . 00 00 . 5 0 000
2.0000 3.8750 0.8268 18900 4910 2980 24100
50. 00 . 5 0. 000 0. . 00 000 . 5 000
a
2.0000 3.8750 1.1875 25400 6590 3820 34300
50. 00 00.000 .000 00 0. 5 . 00 00 . 5 0 000
2.0000 3.9370 0.8268 18900 4910 2980 24100
50. 00 00.000 5.000 00 0. . 00 00 . 0 000
2.0000 3.9370 0.9842 18300 4750 2750 22700
50. 00 00.000 5. 00 00 0. 5 . 00 00 . 5 0 000
2.0000 3.9370 1.0000 18900 4910 2980 24100
50. 00 00.000 . 5 5 000 0. . 0 500 00 .05 000
2.0000 3.9370 1.3750 34300 8880 4340 43000
50. 00 00.000 . 5 5 000 0. . 0 500 00 .05 000
2.0000 3.9370 1.3750 34300 8880 4340 43000
50. 00 00.000 . 5 5 000 0. . 0 500 00 .05 000
2.0000 3.9370 1.3750 34300 8880 4340 43000
50. 00 0 . 00 . 50 000 0. 0 .50 00 00 . 55000
2.0000 4.0000 1.2500 27600 7160 4910 35000
50. 00 0 . 00 . 50 000 0. 0 .50 00 00 . 55000
2.0000 4.0000 1.2500 27600 7160 4910 35000
50. 00 0 . 00 . 5 5 000 0. . 0 500 00 .05 000
2.0000 4.0000 1.3750 34300 8880 4340 43000
50. 00 0 . 00 . 5 5 000 0. . 0 500 00 .05 000
2.0000 4.0000 1.3750 34300 8880 4340 43000
50. 00 0 . 5 0. 000 0. . 0 00 0 00 . 000
2.0000 4.1250 1.1875 31900 8270 4710 42600
50. 00 0 . 5 0. 000 0. . 0 00 0 00 . 000
2.0000 4.1250 1.1875 31900 8270 4710 42600
50. 00 0 . 5 0. 000 0. . 0 00 0 00 . 000
2.0000 4.1250 1.1875 31900 8270 4710 42600
50. 00 0 . 5 0. 000 0. . 0 00 0 00 . 000
2.0000 4.1250 1.1875 31900 8270 4710 42600
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
0. 0 . - . 0. 5 .0 5 .0 . .0 .0 . 0 0. 0 . .5 0.0 0 0. 5
1.1930 0.9375 -0.32 0.03 2.28 2.28 0.13 3.46 3.23 0.07 0.04
1.87
0. 0 . - . .5 5 .0 .0 . .0 .0 . 0 0. 0 . .5 0.0 0 0.
1.1930 0.9375 -0.32 0.14 2.28 2.52 0.13 3.46 3.23 0.07 0.04
1.86
0. 0 . - . .5 5 .0 .0 0. .0 .0 . 0 0. 0 . .5 0.0 0 0. 5
1.1930 0.9375 -0.32 0.14 2.28 2.52 0.03 3.46 3.31 0.07 0.04
1.88
0. 0 . - . . 5 .0 0.0 . .0 .0 . 0 0. 0 . .5 0.0 0 0.
1.1930 0.9375 -0.32 0.25 2.28 2.76 0.13 3.46 3.23 0.07 0.04
1.81
0. 0 . - . . 5 .0 0.0 . .0 .0 . 0 0. 0 . .5 0.0 0 0.
1.1930 0.9375 -0.32 0.25 2.28 2.76 0.13 3.46 3.23 0.07 0.04
1.84
.5 5 . 5 - . .5 5 .0 .0 . 0.0 5.0 . 0 . 0 5 .5 .5 0.0 0 0. 5
1.1250 0.8750 -0.30 0.14 2.28 2.52 0.09 3.54 3.35 0.05 0.09
1.87
.5 5 . 5 - . .5 5 .0 .0 0. 0.0 .0 . 0 . 0 5 .5 .5 0.0 0 0. 5
1.1250 0.8750 -0.30 0.14 2.28 2.52 0.03 3.54 3.39 0.05 0.09
1.88
0. 0 . - . .5 5 .0 .0 . .0 .0 . 0 0. 0 . .5 0.0 0 0. 0
1.1930 0.9375 -0.32 0.14 2.28 2.52 0.13 3.50 3.27 0.07 0.04
1.98
. 5. 5 - .0 . 0.0 .0 0. .0 .0 . 0 .00 5. 0.0 5 0.
0.8640 0.6250 -0.12 0.09 2.36 2.40 0.03 3.62 3.50 0.04 0.08
1.50
. 5 .050 - . . 5 .0 0.0 .5 0.0 .0 0. 0 . 0 . 5. 0.0 0.
0.8750 0.7500 -0.15 0.09 2.24 2.36 0.06 3.54 3.39 0.03 0.06
1.57
. 5 .050 - . .5 5 .0 .0 .5 0.0 .0 0. 0 . 0 . 5. 0.0 0.
0.8750 0.7500 -0.15 0.14 2.24 2.48 0.06 3.54 3.39 0.03 0.06
1.56
. 0. - .0 . 0.0 .0 . .0 .0 . 0 .00 5. 0.0 5 0.
0.8640 0.7982 -0.12 0.09 2.36 2.40 0.09 3.58 3.43 0.04 0.08
1.64
. . - .0 . 0.0 .0 0. .0 0.0 . 0 .00 5. 0.0 5 0.
0.8640 0.7018 -0.12 0.09 2.36 2.40 0.03 3.62 3.54 0.04 0.08
1.60
0. 0 . - . .5 5 .0 .0 . 0.0 .0 . 0 0. 0 . .5 0.0 0 0.
1.1930 0.9375 -0.32 0.14 2.28 2.52 0.13 3.54 3.31 0.07 0.04
2.17
. . - .0 . 0.0 .0 .0 .0 .0 . 0 .00 5. 0.0 5 0.
0.8640 0.7018 -0.12 0.09 2.36 2.40 0.08 3.66 3.50 0.04 0.08
1.67
. 5 . - . . 5 .0 0.0 .0 0.0 .0 0. 0 . 0 . 5. 0.0 0. 5
0.8750 0.8592 -0.15 0.09 2.24 2.36 0.08 3.54 3.39 0.03 0.06
1.88
. . 5 - .0 . 0.0 .0 . .0 .0 . 0 .00 5. 0.0 5 0. 5
0.8640 0.8750 -0.12 0.09 2.36 2.40 0.05 3.66 3.50 0.04 0.08
1.87
.0 . - . 0. 5 .0 5 .0 . .0 .0 . 0 . 0 5 . . 0.0 .
1.4200 1.0625 -0.50 0.03 2.28 2.32 0.13 3.70 3.46 0.11 0.07
2.61
.0 . - . .5 5 .0 5.0 . .0 .0 . 0 . 0 5 . . 0.0 .
1.4200 1.0625 -0.50 0.14 2.28 2.56 0.13 3.70 3.46 0.11 0.07
2.59
.0 . - . .5 5 .0 5.0 . .0 .0 . 0 . 0 5 . . 0.0 .
1.4200 1.0625 -0.50 0.14 2.28 2.56 0.13 3.70 3.46 0.11 0.07
2.63
. 50 5. 00 - . .5 5 .0 .0 . .0 .0 . 0 . 0 . . 0.0 .
1.2500 1.0000 -0.28 0.14 2.32 2.60 0.13 3.78 3.46 0.09 0.05
2.46
. 50 5. 00 - . .5 5 .0 .0 0. .0 0.0 . 0 . 0 . . 0.0 .
1.2500 1.0000 -0.28 0.14 2.32 2.60 0.03 3.78 3.54 0.09 0.05
2.49
.0 . - . 0. 5 .0 5 .0 . 5.0 .0 . 0 . 0 5 . . 0.0 .
1.4200 1.0625 -0.50 0.03 2.28 2.32 0.13 3.74 3.50 0.11 0.07
2.73
.0 . - . .5 5 .0 5.0 . 5.0 .0 . 0 . 0 5 . . 0.0 .
1.4200 1.0625 -0.50 0.14 2.28 2.56 0.13 3.74 3.50 0.11 0.07
2.71
0. 5 . - . . 5 .0 .0 . .0 .0 . 0 . 0 .5 . 0.0 .
1.2188 0.9375 -0.32 0.25 2.32 2.80 0.13 3.90 3.66 0.08 0.07
2.62
0. 5 . - . . 5 .0 .0 0. .0 5.0 . 0 . 0 .5 . 0.0 .
1.2188 0.9375 -0.32 0.25 2.32 2.80 0.03 3.90 3.74 0.08 0.07
2.62
0. 5 . - . . 5 .0 .0 . .0 .0 . 0 . 0 .5 . 0.0 .
1.2188 0.9375 -0.32 0.09 2.32 2.48 0.13 3.90 3.66 0.08 0.07
2.68
0. 5 . - . . 5 .0 .0 0. .0 5.0 . 0 . 0 .5 . 0.0 .
1.2188 0.9375 -0.32 0.09 2.32 2.48 0.03 3.90 3.74 0.08 0.07
2.69
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
50. 00 0 . 5 0. 000 0. . 0 00 0 00 . 000 5 5A 5 0
2.0000 4.1250 1.1875 31900 8270 4710 42600
50. 00 0 . 5 0. 000 0. . 0 00 0 00 . 000 5 5A 5
2.0000 4.1250 1.1875 31900 8270 4710 42600
50. 00 0 . 5 0. 000 0. . 00 00 . 000 55 5 X
2.0000 4.1250 1.1875 28200 7320 4200 37200
50. 00 0 . 5 0. 000 0. . 00 00 . 000 55-S 5 X
2.0000 4.1250 1.1875 28200 7320 4200 37200
50. 00 0 . 5 .5 5 000 0. 0 . 000 00 . 5 0 000 5 00 5
2.0000 4.1250 1.4375 35500 9210 6340 45400
50. 00 0 . 5 .5 5 000 0. 0 . 000 00 . 5 0 000 5 00 5
2.0000 4.1250 1.4375 35500 9210 6340 45400
50. 00 0 . 5 .5 5 000 0. 0 . 000 00 . 5 0 000 5 0 5
2.0000 4.1250 1.4375 35500 9210 6340 45400
50. 00 0 . 5 .5 5 000 0. . 00 00 . 0 000 HM 0 0 HM 0 0 0
2.0000 4.1250 1.4375 35700 9260 7730 50200
50. 00 0 . 5 .5 5 000 0. . 00 00 . 0 000 HM 0 0 HM 0 0
2.0000 4.1250 1.4375 35700 9260 7730 50200
50. 00 0 . 5 . 000 0. . 00 00 . 000 5 0 5 5
2.0000 4.1250 1.5625 37500 9730 5590 53200
50. 00 05.000 . 5 000 0. . 00 00 . 0 000 HM 0 0 JHM 0 0
2.0000 4.1339 1.4517 35700 9260 7730 50200
50. 00 0 . 50 . 000 0. . 00 00 . 000 55 5 A
2.0000 4.2500 1.0938 28200 7320 4200 37200
50. 00 0 . 50 . 000 0. . 00 00 . 000 55-S 5 A
2.0000 4.2500 1.0938 28200 7320 4200 37200
50. 00 0 . 50 . 5 000 0. . 00 00 . 000 55 5
2.0000 4.2500 1.0943 28200 7320 4200 37200
50. 00 0 . 50 .5 5 000 0. 0 . 000 00 . 5 0 000 5 00 5 5
2.0000 4.2500 1.4375 35500 9210 6340 45400
50. 00 0.000 . 5 000 0. . 00 00 . 000 55 5
2.0000 4.3307 1.0943 28200 7320 4200 37200
50. 00 . 5 0. 500 0. 0. 5500 00 0. 000 55 00 55
2.0000 4.3750 1.1875 22100 5740 8690 26700
50. 00 . 5 0. 000 0. 0. 0 00 00 0. 000 55 00C 55
2.0000 4.3750 1.1875 26500 6880 10400 36200
50. 00 . 5 0. 000 0. 0. 500 00 0. 5 000 HM 0 HM 0
2.0000 4.3750 1.1875 25600 6640 10000 34400
50. 00 . 5 . 0 000 0. . 00 00 . 000 55 5
2.0000 4.3750 1.5003 28200 7320 4200 37200
50. 00 . 5 . 0 000 0. . 00 00 . 000 55-S 5
2.0000 4.3750 1.5003 28200 7320 4200 37200
50. 00 . 0. 55000 0. . 0 00 00 . 000 5 5 0
2.0000 4.4375 1.1875 34700 9010 5230 50300
50. 00 . 0. 55000 0. . 0 00 00 . 000 5 5
2.0000 4.4375 1.1875 34700 9010 5230 50300
50. 00 . 0. 55000 0. . 0 00 00 . 000 5 5 5 0
2.0000 4.4375 1.1875 34700 9010 5230 50300
50. 00 . 0. 55000 0. . 0 00 00 . 000 5 5 5
2.0000 4.4375 1.1875 34700 9010 5230 50300
50. 00 . 0. 500 0. 0. 5500 00 0. 000 55 00 55
2.0000 4.4375 1.1875 22100 5740 8690 26700
50. 00 . 00 . 50 0 000 0. . 5 00 500 . 5 000 5 5 5 0
2.0000 4.5000 1.7500 46500 12100 8880 57500
50. 00 . 5 . 000 0. 0. 5 00 00 0. 000 00
2.0000 4.6250 1.3125 31000 8040 8620 37300
B
Caption:
Caption:
C
D
B
d
a
B 0 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
0. 5 . - . 0. 5 .0 0.0 . .0 .0 . 0 . 0 .5 . 0.0 .
1.2188 0.9375 -0.32 0.03 2.32 2.36 0.13 3.90 3.66 0.08 0.07
2.68
0. 5 . - . 0. 5 .0 0.0 0. .0 5.0 . 0 . 0 .5 . 0.0 .
1.2188 0.9375 -0.32 0.03 2.32 2.36 0.03 3.90 3.74 0.08 0.07
2.68
. . 05 - . 0. 5 .0 0.0 . .0 .0 . 0 . 0 5 . . 0.0 .
1.1542 0.9687 -0.28 0.03 2.32 2.36 0.13 3.86 3.62 0.09 0.05
2.59
. . 05 - . .5 5 .0 5.0 . .0 .0 . 0 . 0 5 . . 0.0 .
1.1542 0.9687 -0.28 0.14 2.32 2.56 0.13 3.86 3.62 0.09 0.05
2.57
.5 .5 5 - . .5 .0 .0 . .0 .0 . 0 . 0 5 . . 0.0 . 0
1.4375 1.1250 -0.38 0.14 2.40 2.68 0.13 3.90 3.62 0.14 0.05
3.09
.5 .5 5 - . .5 .0 .0 0. 0 .0 .0 . 0 . 0 5 . . 0.0 .
1.4375 1.1250 -0.38 0.14 2.40 2.68 0.03 4.02 3.43 0.14 0.05
3.12
.5 .5 5 - . 0. .0 .0 . .0 .0 . 0 . 0 5 . . 0.0 .
1.4375 1.1250 -0.38 0.03 2.40 2.44 0.13 3.90 3.62 0.14 0.05
3.11
.5 .5 5 - . .5 .0 0.0 . 00.0 .0 . 0 . 0 . . 0.0 0 .
1.4375 1.1250 -0.29 0.14 2.48 2.76 0.13 3.94 3.50 0.14 0.08
3.24
.5 .5 5 - . .5 .0 0.0 0. 00.0 .0 . 0 . 0 . . 0.0 0 .
1.4375 1.1250 -0.29 0.14 2.48 2.76 0.03 3.94 3.58 0.14 0.08
3.25
0. 5 . - . .5 .0 .0 . .0 0.0 . 0 . 0 . .5 0. 0 .
1.5810 1.3125 -0.49 0.14 2.40 2.64 0.13 3.90 3.54 0.07 0.05
3.58
.5 .000 - . .5 .0 0.0 .5 00.0 0.0 . 0 . 0 . . 0.0 0 .
1.4375 1.1417 -0.29 0.14 2.48 2.76 0.10 3.94 3.54 0.14 0.08
3.28
. . 5 - . 0. 5 .0 0.0 0. 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 0.8750 -0.28 0.03 2.32 2.36 0.03 3.94 3.82 0.09 0.05
2.71
. . 5 - . .5 5 .0 5.0 0. 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 0.8750 -0.28 0.14 2.32 2.56 0.03 3.94 3.82 0.09 0.05
2.70
. .000 - . 0. 5 .0 0.0 0. 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 1.0630 -0.28 0.03 2.32 2.36 0.03 3.94 3.82 0.09 0.05
2.84
.5 .5 5 - . .5 .0 .0 . 0 .0 .0 . 0 . 0 5 . . 0.0 .5
1.4375 1.1250 -0.38 0.14 2.40 2.68 0.13 3.98 3.66 0.14 0.05
3.35
. .000 - . 0. 5 .0 0.0 .0 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 1.0630 -0.28 0.03 2.32 2.36 0.08 3.94 3.78 0.09 0.05
2.99
. 0 0. . .5 .0 .0 . 05.0 .0 . 0 . 0 . . 0. 0 5 .
1.0594 0.8125 0.28 0.14 2.51 2.80 0.13 4.13 3.62 0.19 0.13
2.77
. 0 0. . .5 .5 .0 . 05.0 .0 5.00 . 0 . 5. 0. .
1.0594 0.8125 0.30 0.14 2.54 2.80 0.13 4.13 3.62 0.20 0.14
2.96
.5 5 0. . .5 5.0 .0 . 05.0 .0 . 0 .00 . . 0. .
1.1250 0.8125 0.30 0.14 2.56 2.91 0.13 4.13 3.58 0.18 0.08
2.96
. .5 5 - . 0. 5 .0 0.0 . 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 1.2813 -0.28 0.03 2.32 2.36 0.13 3.94 3.66 0.09 0.05
3.60
. .5 5 - . .5 5 .0 5.0 . 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 1.2813 -0.28 0.14 2.32 2.56 0.13 3.94 3.66 0.09 0.05
3.59
0. . - . 0. .0 .0 . 0 .0 0 .0 . 0 . 0 . . 0. 0 .5
1.1875 0.9375 -0.26 0.03 2.40 2.44 0.13 4.21 3.98 0.06 0.10
3.33
0. . - . 0. .0 .0 0. 0 .0 0 .0 . 0 . 0 . . 0. 0 .5
1.1875 0.9375 -0.26 0.03 2.40 2.44 0.03 4.21 4.06 0.06 0.10
3.34
0. . - . .5 .0 .0 . 0 .0 0 .0 . 0 . 0 . . 0. 0 .50
1.1875 0.9375 -0.26 0.14 2.40 2.68 0.13 4.21 3.98 0.06 0.10
3.32
0. . - . .5 .0 .0 0. 0 .0 0 .0 . 0 . 0 . . 0. 0 .5
1.1875 0.9375 -0.26 0.14 2.40 2.68 0.03 4.21 4.06 0.06 0.10
3.32
. 0 0. . .5 .0 .0 . 0 .0 .0 . 0 . 0 . . 0. 0 5 . 0
1.0594 0.8125 0.28 0.14 2.51 2.80 0.13 4.17 3.62 0.19 0.13
2.87
. 50 . 5 - . .5 0.0 .0 . 0 .0 .0 . 0 .00 . 0. 05 .
1.7500 1.3750 -0.49 0.14 2.36 2.83 0.13 4.21 3.82 0.14 0.04
4.71
. 50 . -0. .5 5.0 .0 . .0 00.0 5.00 .00 50. . 0.0 5 .
1.2500 0.9375 -0.01 0.14 2.56 2.80 0.13 4.37 3.94 0.20 0.08
3.61
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
50. 00 0. 50 . 5 000 0. . 00 00 . 000
2.0000 4.7500 1.6250 43200 11200 6020 54800
50. 00 . . 5 000 0. . 5 00 00 . 000 55 5 55 5
2.0000 4.8125 1.7188 49200 12800 7830 73500
50. 00 . 5 .5 000 0. 0. 00 5 00 0. 0 000 00C
2.0000 4.8750 1.4375 37600 9760 12300 46800
50. 00 . 5 .5 000 0. 0. 00 5 00 0. 0 000 0 C
2.0000 4.8750 1.4375 37600 9760 12300 46800
50. 00 . 5 . 00 000 0. 5 . 5 00 00 . 000 555 55
2.0000 4.8750 1.5000 39700 10300 6100 55700
50. 00 . 5 . 00 000 0. 5 . 5 00 00 . 000 555 55 A
2.0000 4.8750 1.5000 39700 10300 6100 55700
50. 00 .000 .5 000 0.50 . 0 00 00 . 5 000 HM HM 0
2.0000 5.0000 1.4375 40300 10400 8970 57600
50. 00 .000 . 50 5000 0. . 5 500 00 . 0 000 5 00 5500
2.0000 5.0000 1.7500 50700 13100 11000 66700
50. 00 .000 50. 00 000 0. 0 .0 500 500 . 0000 0
2.0000 5.0000 2.0000 63700 16500 8440 83300
50. 5 00.000 5.000 50000 0. 0 .50 00 00 . 0 000 XGA Y
2.0006 3.9370 1.3780 33700 8750 5980 45300
5 .5 . 00 0. 500 0. . 0 00 00 . 5 00 -S A
2.0312 3.5000 0.8125 17900 4640 2540 21500
5 .5 0.000 0.000 500 0. . 0 00 00 . 5 00 -S
2.0312 3.5433 0.7874 17900 4640 2540 21500
5 .000 5.000 .050 00 0.5 .0 00 000 .0 00 0 X 5X
2.0472 3.3465 0.7500 10700 2780 2710 14400
5 .000 0.000 . 50 00 0. . 00 00 . 00 XGA 0 0 Y 0 0
2.0472 3.5433 0.8563 16500 4290 3080 19700
5 . . 0 . 50 00 0. .5 00 5 00 .55 0000 5 5 0
2.0625 3.5425 0.9744 20600 5340 3450 29200
5 . .0 5 . 0 00 0. .5 00 5 00 .55 0000 5 5
2.0625 3.6250 0.9688 20600 5340 3450 29200
5 . . 0. 00 0. . 00 00 . 0 000
2.0625 3.6718 0.8125 18300 4750 2750 22700
5 . . 0. 00 0. . 00 00 . 0 000 A
2.0625 3.6718 0.8125 18300 4750 2750 22700
5 . . . 00 0. . 00 00 . 0 000 0
2.0625 3.6718 1.0625 18300 4750 2750 22700
5 . . . 00 0. . 00 00 . 0 000 0
2.0625 3.6718 1.0625 18300 4750 2750 22700
5 . . . 00 0. . 00 00 . 0 000 A 0
2.0625 3.6718 1.0625 18300 4750 2750 22700
5 . . 0. 000 0. . 00 000 . 5 000 0
2.0625 3.6718 1.1875 25400 6590 3820 34300
5 . . 0. 000 0. . 00 000 . 5 000 0
2.0625 3.6718 1.1875 25400 6590 3820 34300
5 . 5. 50 . 0000 0. . 00 00 . 000 0
2.0625 3.7500 1.0938 27000 7000 3950 36200
5 . 5. 50 . 0000 0. . 00 00 . 000
2.0625 3.7500 1.0938 27000 7000 3950 36200
5 . . . 5 00 0. . 00 00 . 0 000 A
2.0625 3.8125 0.8750 18300 4750 2750 22700
5 . . 5 0. 000 0. . 00 000 . 5 000
2.0625 3.8750 1.1875 25400 6590 3820 34300
5 . 00.000 5.000 00 0. . 00 00 . 0 000
2.0625 3.9370 0.9842 18300 4750 2750 22700
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 5 . 50 - .0 .5 .0 .0 . 0.0 05.0 . 0 . 0 5. . 0.0 .
1.6250 1.2500 -0.55 0.14 2.40 2.64 0.13 4.33 4.13 0.15 0.07
5.00
. .5 - . . 5.0 .0 . .0 0 .0 .50 . 0 0 . 0.0 5 .
1.7230 1.4375 -0.48 0.05 2.56 2.64 0.13 4.57 4.17 0.10 0.05
5.92
. 5. 00 .0 .5 .0 .0 . .0 0 .0 . 0 . 0 5 . .5 0.0 5 .
1.2910 1.0000 0.08 0.14 2.64 3.03 0.13 4.57 4.02 0.19 0.17
4.66
. 5. 00 .0 0. .0 .0 . .0 0 .0 . 0 . 0 5 . .5 0.0 5 .
1.2910 1.0000 0.08 0.03 2.64 3.03 0.13 4.57 4.02 0.19 0.17
4.66
. . - . . .0 .0 . .0 0 .0 . 0 . 0 . 0. 0 .
1.4440 1.3125 -0.37 0.09 2.44 2.60 0.13 4.57 4.29 0.09 0.05
5.20
. 0. - . . .0 .0 . .0 0 .0 . 0 . 0 . 0. 0 .
1.4440 1.1875 -0.37 0.09 2.44 2.60 0.13 4.57 4.29 0.09 0.05
5.09
.5 . - . .5 .0 5.0 . .0 .0 .00 . 0 . . 0. 5 .
1.4375 1.0625 -0.15 0.14 2.72 2.95 0.13 4.76 4.37 0.16 0.05
5.33
. 50 . 5 - . .5 .0 5.0 . .0 0 .0 . 0 .00 . . 0.0 .
1.7500 1.3750 -0.37 0.14 2.72 2.95 0.13 4.69 4.21 0.16 0.04
6.34
5 . . 5 - . .5 5.0 .0 . .0 0 .0 . 0 . 0 0 . 0.0 5 . 5
2.0625 1.6250 -0.77 0.14 2.56 2.80 0.13 4.61 4.25 0.09 0.10
7.39
5.000 .000 - . .0 .0 .0 .5 .0 .0 . 0 . 0 5 . 5. 0. 0 0 . 5
1.3780 1.0630 -0.38 0.08 2.44 2.64 0.06 3.78 3.50 0.11 0.11
2.76
. 5 .5 - . .0 5 .0 5 .0 . .0 .0 0.50 .00 . 0.0 0.50
0.8750 0.6501 -0.17 0.08 2.20 2.32 0.05 3.31 3.19 0.02 0.04
1.10
. 5 5. 5 - . .0 5 .0 5 .0 .0 .0 .0 0.50 .00 . 0.0 0.5
0.8750 0.6250 -0.17 0.08 2.20 2.32 0.08 3.31 3.19 0.02 0.04
1.11
. .500 .0 .0 5 .0 0.0 .5 .0 .0 .50 . 0 . 0. 0.0 5 0.
0.7190 0.4921 0.08 0.08 2.24 2.36 0.06 3.19 2.99 0.10 0.06
0.82
0.000 .000 - .0 .0 5 .0 .0 .5 5.0 .0 . 0 . 0 0. 5. 0.0 0.5
0.7874 0.6693 -0.08 0.16 2.32 2.60 0.06 3.35 3.19 0.05 0.12
1.13
5. 00 . - . .5 5 .0 5.0 . .0 .0 . 0 .00 . . 0.0 0.
1.0000 0.7869 -0.19 0.14 2.28 2.56 0.09 3.39 3.19 0.06 0.04
1.37
5. 00 . 5 - . .5 5 .0 5.0 0. .0 .0 . 0 .00 . . 0.0 0.
1.0000 0.7813 -0.19 0.14 2.28 2.56 0.03 3.43 3.27 0.06 0.04
1.48
. 5 5.0 - . . 5 .0 .0 . .0 5.0 0. 0 . 0 . 5. 0.0 0.5
0.8750 0.5938 -0.15 0.09 2.28 2.44 0.05 3.46 3.35 0.03 0.06
1.26
. 5 5.0 - . . 5 .0 .0 . .0 5.0 0. 0 . 0 . 5. 0.0 0.5
0.8750 0.5938 -0.15 0.19 2.28 2.64 0.05 3.46 3.35 0.03 0.06
1.23
. 5 . - . . 5 .0 .0 . .0 .0 0. 0 . 0 . 5. 0.0 0.
0.8750 0.9375 -0.15 0.09 2.28 2.44 0.13 3.46 3.23 0.03 0.06
1.50
. 5 . - . . 5 .0 .0 0. .0 .0 0. 0 . 0 . 5. 0.0 0.
0.8750 0.9375 -0.15 0.09 2.28 2.44 0.03 3.46 3.31 0.03 0.06
1.53
. 5 . - . . 5 .0 .0 . .0 .0 0. 0 . 0 . 5. 0.0 0.
0.8750 0.9375 -0.15 0.19 2.28 2.64 0.13 3.46 3.23 0.03 0.06
1.48
0. 0 . - . . 5 .0 .0 . .0 .0 . 0 0. 0 . .5 0.0 0 0.
1.1930 0.9375 -0.32 0.09 2.32 2.48 0.13 3.46 3.23 0.07 0.04
1.80
0. 0 . - . . 5 .0 .0 0. .0 .0 . 0 0. 0 . .5 0.0 0 0.
1.1930 0.9375 -0.32 0.09 2.32 2.48 0.03 3.46 3.31 0.07 0.04
1.82
.5 5 . 5 - . .5 5 .0 .0 . 0.0 5.0 . 0 . 0 5 .5 .5 0.0 0 0.
1.1250 0.8750 -0.30 0.06 2.32 2.40 0.09 3.54 3.35 0.05 0.09
1.82
.5 5 . 5 - . .5 5 .0 .0 . 0.0 5.0 . 0 . 0 5 .5 .5 0.0 0 0.
1.1250 0.8750 -0.30 0.14 2.32 2.60 0.09 3.54 3.35 0.05 0.09
1.80
. 5 .050 - . . 5 .0 .0 .5 0.0 .0 0. 0 . 0 . 5. 0.0 0.
0.8750 0.7500 -0.15 0.09 2.28 2.44 0.06 3.54 3.39 0.03 0.06
1.52
0. 0 . - . . 5 .0 .0 . 0.0 .0 . 0 0. 0 . .5 0.0 0 0.
1.1930 0.9375 -0.32 0.09 2.32 2.48 0.13 3.54 3.31 0.07 0.04
2.12
. 5 . - . . 5 .0 .0 .0 0.0 .0 0. 0 . 0 . 5. 0.0 0.
0.8750 0.8592 -0.15 0.09 2.28 2.44 0.08 3.54 3.39 0.03 0.06
1.83
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
5 . 0 . 5 0. 000 0. . 00 00 . 000 5 X
2.0625 4.1250 1.1875 28200 7320 4200 37200
5 . 0 . 50 . 000 0. . 00 00 . 000 5 A
2.0625 4.2500 1.0938 28200 7320 4200 37200
5 . 0 . 50 . 000 0. . 00 00 . 000 5 AS
2.0625 4.2500 1.0938 28200 7320 4200 37200
5 . 0 . 50 .5 5 000 0. 0 .0 00 000 . 0 000 5 0 5 X
2.0625 4.2500 1.4375 35800 9290 4720 46200
5 . 0.000 . 0 5 000 0. 0 .0 00 000 . 0 000 5 0 5
2.0625 4.3307 1.3437 35800 9290 4720 46200
5 . . 5 0. 500 0. 0. 5500 00 0. 000 55 0 55
2.0625 4.3750 1.1875 22100 5740 8690 26700
5 . . 5 0. 000 0. 0. 0 00 00 0. 000 55 0 C 55
2.0625 4.3750 1.1875 26500 6880 10400 36200
5 . . 5 . 00 5 000 0. 0 .0 00 000 . 0 000 5 0 5 A
2.0625 4.3750 1.5000 35800 9290 4720 46200
5 . . 0. 500 0. 0. 5500 00 0. 000 55 0 55
2.0625 4.4375 1.1875 22100 5740 8690 26700
5 . 5 . . 5 5 00 0. .5 5 00 0000 .50 5 00 L50 5 L50 0
2.1250 3.4375 0.7188 13100 3380 2250 21500
5 . 5 . 00 .050 0 00 0.55 . 0 5 00 00 .0 00 LM 0 LM 0 0
2.1250 3.5000 0.7500 13600 3530 3300 18400
5 . 5 5. 50 . 0000 0. . 00 00 . 000 5
2.1250 3.7500 1.0938 27000 7000 3950 36200
5 . 5 5. 50 . 0000 0. . 00 00 . 000 5
2.1250 3.7500 1.0938 27000 7000 3950 36200
5 . 5 . .000 00 0. 5 . 00 00 . 5 0 000 A A
2.1250 3.8125 0.8268 18900 4910 2980 24100
5 . 5 . 5 .000 00 0. 5 . 00 00 . 5 0 000 A
2.1250 3.8750 0.8268 18900 4910 2980 24100
5 . 5 00.000 .000 00 0. 5 . 00 00 . 5 0 000 A A
2.1250 3.9370 0.8268 18900 4910 2980 24100
5 . 5 0 . 5 0. 000 0. . 0 00 0 00 . 000 5 5 0
2.1250 4.1250 1.1875 31900 8270 4710 42600
5 . 5 0 . 5 0. 000 0. . 0 00 0 00 . 000 5 5
2.1250 4.1250 1.1875 31900 8270 4710 42600
5 . 5 0 . 5 0. 000 0. . 00 00 . 000 5 5 X
2.1250 4.1250 1.1875 28200 7320 4200 37200
5 . 5 0 . 5 .5 5 000 0. . 00 00 . 0 000 HM 0 0 A HM 0 0
2.1250 4.1250 1.4375 35700 9260 7730 50200
5 . 5 0 . 5 .5 5 000 0. . 00 00 . 0 000 HM 0 0 HM 0 0 0
2.1250 4.1250 1.4375 35700 9260 7730 50200
5 . 5 0 . 5 .5 5 000 0. . 00 00 . 0 000 HM 0 0 HM 0 0
2.1250 4.1250 1.4375 35700 9260 7730 50200
5 . 5 0 . 5 . 000 0. . 00 00 . 000 5 5 5 5
2.1250 4.1250 1.5625 37500 9730 5590 53200
5 . 5 0 . 50 . 000 0. . 00 00 . 000 5 5 A
2.1250 4.2500 1.0938 28200 7320 4200 37200
5 . 5 0 . 50 . 000 0. . 00 00 . 000 5 5 AS
2.1250 4.2500 1.0938 28200 7320 4200 37200
5 . 5 0 . 50 . 5 000 0. . 00 00 . 000 5 5
2.1250 4.2500 1.0943 28200 7320 4200 37200
5 . 5 0 . 50 .55 000 0. . 00 00 . 000 5 5 A
2.1250 4.2500 1.2818 28200 7320 4200 37200
5 . 5 0 . 50 .5 5 000 0. 0 .0 00 000 . 0 000 5 5 X
2.1250 4.2500 1.4375 35800 9290 4720 46200
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. . 05 - . .5 0.0 .0 . .0 .0 . 0 . 0 5 . . 0.0 .
1.1542 0.9687 -0.28 0.06 2.36 2.44 0.13 3.86 3.62 0.09 0.05
2.49
. . 5 - . .5 0.0 .0 0. 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 0.8750 -0.28 0.06 2.36 2.44 0.03 3.94 3.82 0.09 0.05
2.61
. . 5 - . .5 0.0 .0 . 00.0 5.0 . 0 . 0 5 . . 0.0 .
1.1542 0.8750 -0.28 0.06 2.36 2.44 0.09 3.94 3.74 0.09 0.05
2.61
. 5 .5 5 - . .5 0.0 .0 . 00.0 .0 . 0 0. 0 . . 0.0 .
1.4550 1.1250 -0.48 0.14 2.36 2.64 0.13 3.94 3.70 0.11 0.04
3.27
. 5 . - . .5 0.0 .0 . 00.0 .0 . 0 0. 0 . . 0.0 .5
1.4550 1.0625 -0.48 0.14 2.36 2.64 0.13 3.94 3.70 0.11 0.04
3.33
. 0 0. . .5 .0 .0 . 05.0 .0 . 0 . 0 . . 0. 0 5 .
1.0594 0.8125 0.28 0.14 2.51 2.83 0.13 4.13 3.62 0.19 0.13
2.71
. 0 0. . .5 .5 .0 . 05.0 .0 5.00 . 0 . 5. 0. .
1.0594 0.8125 0.30 0.14 2.54 2.83 0.13 4.13 3.62 0.20 0.14
2.90
. 5 0. - . .5 0.0 .0 . 00.0 5.0 . 0 0. 0 . . 0.0 . 5
1.4550 1.1875 -0.48 0.14 2.36 2.64 0.13 3.94 3.74 0.11 0.04
3.65
. 0 0. . .5 .0 .0 . 0 .0 .0 . 0 . 0 . . 0. 0 5 .
1.0594 0.8125 0.28 0.14 2.51 2.83 0.13 4.17 3.62 0.19 0.13
2.81
. 5 . -0. .5 0.0 .0 .5 .0 .0 0. 0 .00 . . 0.0 0.
0.7188 0.5625 -0.03 0.06 2.36 2.44 0.06 3.27 3.11 0.01 0.08
0.94
.050 . . . .0 5.0 .0 5.0 0.0 .50 . 0 . . 0.0 00 0.
0.7500 0.5312 0.09 0.09 2.40 2.56 0.08 3.35 3.15 0.06 0.06
0.94
.5 5 . 5 - . .5 0.0 .0 . 0.0 5.0 . 0 . 0 5 .5 .5 0.0 0 0. 0
1.1250 0.8750 -0.30 0.06 2.36 2.48 0.09 3.54 3.35 0.05 0.09
1.75
.5 5 . 5 - . .5 0.0 .0 0. 0.0 .0 . 0 . 0 5 .5 .5 0.0 0 0. 0
1.1250 0.8750 -0.30 0.06 2.36 2.48 0.03 3.54 3.39 0.05 0.09
1.77
. 5. 5 - .0 0. 0.0 .0 0. .0 .0 . 0 .00 5. 0.0 5 0.
0.8640 0.6250 -0.12 0.03 2.36 2.40 0.03 3.62 3.50 0.04 0.08
1.41
. . - .0 0. 0.0 .0 0. .0 0.0 . 0 .00 5. 0.0 5 0.
0.8640 0.7018 -0.12 0.03 2.36 2.40 0.03 3.62 3.54 0.04 0.08
1.51
. . - .0 0. 0.0 .0 .0 .0 .0 . 0 .00 5. 0.0 5 0.
0.8640 0.7018 -0.12 0.03 2.36 2.40 0.08 3.66 3.50 0.04 0.08
1.58
0. 5 . - . 0. .0 .0 . .0 .0 . 0 . 0 .5 . 0.0 . 5
1.2188 0.9375 -0.32 0.03 2.44 2.44 0.13 3.90 3.66 0.08 0.07
2.54
0. 5 . - . 0. .0 .0 0. .0 5.0 . 0 . 0 .5 . 0.0 . 5
1.2188 0.9375 -0.32 0.03 2.44 2.44 0.03 3.90 3.74 0.08 0.07
2.54
. . 05 - . .5 .0 .0 . .0 .0 . 0 . 0 5 . . 0.0 .
1.1542 0.9687 -0.28 0.14 2.40 2.68 0.13 3.86 3.62 0.09 0.05
2.44
.5 .5 5 - . .5 .0 .0 0. 00.0 .0 . 0 . 0 . . 0.0 0 .
1.4375 1.1250 -0.29 0.06 2.48 2.72 0.03 3.94 3.58 0.14 0.08
3.07
.5 .5 5 - . .5 .0 .0 . 00.0 .0 . 0 . 0 . . 0.0 0 . 0
1.4375 1.1250 -0.29 0.14 2.48 2.87 0.13 3.94 3.50 0.14 0.08
3.08
.5 .5 5 - . .5 .0 .0 0. 00.0 .0 . 0 . 0 . . 0.0 0 . 0
1.4375 1.1250 -0.29 0.14 2.48 2.87 0.03 3.94 3.58 0.14 0.08
3.08
0. 5 . - . .5 .0 0.0 . .0 0.0 . 0 . 0 . .5 0. 0 .5
1.5810 1.3125 -0.49 0.14 2.48 2.76 0.13 3.90 3.54 0.07 0.05
3.39
. . 5 - . .5 .0 .0 0. 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 0.8750 -0.28 0.14 2.40 2.68 0.03 3.94 3.82 0.09 0.05
2.56
. . 5 - . .5 .0 .0 . 00.0 5.0 . 0 . 0 5 . . 0.0 .
1.1542 0.8750 -0.28 0.14 2.40 2.68 0.09 3.94 3.74 0.09 0.05
2.56
. .000 - . .5 .0 .0 0. 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 1.0630 -0.28 0.14 2.40 2.68 0.03 3.94 3.82 0.09 0.05
2.69
. .000 - . .5 .0 .0 . 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 1.0630 -0.28 0.14 2.40 2.68 0.13 3.94 3.66 0.09 0.05
2.80
. 5 .5 5 - . .5 .0 .0 . 00.0 .0 . 0 0. 0 . . 0.0 . 5
1.4550 1.1250 -0.48 0.14 2.40 2.68 0.13 3.94 3.70 0.11 0.04
3.19
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
5 . 5 0 . 50 .5 5 000 0. 0 .0 00 000 . 0 000 5 A 5 X
2.1250 4.2500 1.4375 35800 9290 4720 46200
5 . 5 0.000 . 000 0. . 00 00 . 000 5 5
2.1250 4.3307 1.0938 28200 7320 4200 37200
5 . 5 0.000 . 0 5 000 0. 0 .0 00 000 . 0 000 5 5
2.1250 4.3307 1.3437 35800 9290 4720 46200
5 . 5 . 5 . 00 5 000 0. 0 .0 00 000 . 0 000 5 A 5 A
2.1250 4.3750 1.5000 35800 9290 4720 46200
5 . 5 . 5 . 5 000 0. . 00 00 . 000 5 5 5
2.1250 4.3750 1.5313 37500 9730 5590 53200
5 . 5 . 0. 55000 0. . 0 00 00 . 000 5 5 0
2.1250 4.4375 1.1875 34700 9010 5230 50300
5 . 5 . 5 . 000 0. 0. 5 00 00 0. 000
2.1250 4.6250 1.3125 31000 8040 8620 37300
5 . 5 . 5 . 000 0. 0. 5 00 00 0. 000
2.1250 4.6250 1.3125 31000 8040 8620 37300
5 . 5 0. 50 . 5 000 0. . 00 00 . 000
2.1250 4.7500 1.6250 43200 11200 6020 54800
5 . 5 0. 50 . 5 000 0. . 00 00 . 000
2.1250 4.7500 1.6250 43200 11200 6020 54800
5 . 5 0. 50 . 5 000 0. . 00 00 . 000 -S
2.1250 4.7500 1.6250 43200 11200 6020 54800
5 . 5 . . 000 0. 0. 0 00 00 0. 000 5 5 0
2.1250 4.8125 1.3125 32200 8340 9500 39900
5 . 5 . . 5 000 0. . 5 00 00 . 000 55 55 5
2.1250 4.8125 1.7188 49200 12800 7830 73500
5 . 5 . . 5 000 0. . 5 00 00 . 000 55 55 5
2.1250 4.8125 1.7188 49200 12800 7830 73500
5 . 5 . 5 .5 000 0. 0. 00 5 00 0. 0 000 C
2.1250 4.8750 1.4375 37600 9760 12300 46800
5 . 5 . 5 .5 000 0. 0. 00 5 00 0. 0 000 C
2.1250 4.8750 1.4375 37600 9760 12300 46800
5 . 5 . 5 . 00 000 0. 5 . 5 00 00 . 000 55 -S 55 A
2.1250 4.8750 1.5000 39700 10300 6100 55700
5 . 5 .000 .5 000 0. 0. 00 5 00 0. 0 000 C 500
2.1250 5.0000 1.4375 37600 9760 12300 46800
5 . 5 .000 . 50 5000 0. . 5 500 00 . 0 000 5 5500
2.1250 5.0000 1.7500 50700 13100 11000 66700
5 . 5 .000 50. 00 000 0. 0 .0 500 500 . 0000 0 0
2.1250 5.0000 2.0000 63700 16500 8440 83300
5 . 5 0. 5 . 00 5 000 0. 0. 0000 5 00 0. 000 HM HM 0
2.1250 5.1250 1.3425 34700 9000 12600 41100
5 . 5 0. 5 .5 5 000 0. 0. 0000 5 00 0. 000 HM HM 0
2.1250 5.1250 1.4375 34700 9000 12600 41100
5 . 5 . . 5 000 0. 0. 0000 5 00 0. 000 HM HM
2.1250 5.3143 1.3169 34700 9000 12600 41100
5 . 5 .5 5 .5 5000 0. 0. 00 000 0. 000 5C 5
2.1250 5.3750 1.4375 41500 10800 16000 52600
5 . 5 .5 5 . 5 000 0. . 55 00 00 . 000
2.1250 5.3750 1.6250 48500 12600 7790 67000
5 . 5 0.0 0 .5 5000 0. 0. 00 000 0. 000 C 55
2.1250 5.5130 1.4375 41500 10800 16000 52600
5 . 5 0.0 0 .5 5000 0. 0. 00 000 0. 000 5C 55
2.1250 5.5130 1.4375 41500 10800 16000 52600
5 . 0 . 5 .5 5 000 0. . 00 00 . 0 000 HM 0 0 HM 0 0 0
2.1452 4.1250 1.4375 35700 9260 7730 50200
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 5 .5 5 - . 5.5 .0 .0 . 00.0 .0 . 0 0. 0 . . 0.0 .
1.4550 1.1250 -0.48 0.22 2.40 2.83 0.13 3.94 3.70 0.11 0.04
3.16
. .000 - . .5 .0 .0 .0 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 1.0630 -0.28 0.14 2.40 2.68 0.08 3.94 3.78 0.09 0.05
2.84
. 5 . - . .5 .0 .0 . 00.0 .0 . 0 0. 0 . . 0.0 .
1.4550 1.0625 -0.48 0.14 2.40 2.68 0.13 3.94 3.70 0.11 0.04
3.24
. 5 0. - . 5.5 .0 .0 . 00.0 5.0 . 0 0. 0 . . 0.0 . 0
1.4550 1.1875 -0.48 0.22 2.40 2.83 0.13 3.94 3.74 0.11 0.04
3.53
0. 5 .5 5 - . .5 .0 0.0 . 00.0 .0 . 0 . 0 . .5 0. 0 .
1.5810 1.2813 -0.49 0.14 2.48 2.76 0.13 3.94 3.66 0.07 0.05
3.95
0. . - . .5 .0 0.0 . 0 .0 0 .0 . 0 . 0 . . 0. 0 .
1.1875 0.9375 -0.26 0.14 2.52 2.76 0.13 4.21 3.98 0.06 0.10
3.18
. 50 . -0. .5 .0 .0 0. .0 0 .0 5.00 .00 50. . 0.0 5 .5
1.2500 0.9375 -0.01 0.14 2.64 2.87 0.03 4.37 4.02 0.20 0.08
3.50
. 50 . -0. .5 .0 .0 . .0 00.0 5.00 .00 50. . 0.0 5 .5
1.2500 0.9375 -0.01 0.14 2.64 2.87 0.13 4.37 3.94 0.20 0.08
3.46
. 5 . 50 - .0 .5 .0 0.0 . 0.0 05.0 . 0 . 0 5. . 0.0 .
1.6250 1.2500 -0.55 0.14 2.48 2.76 0.13 4.33 4.13 0.15 0.07
4.82
. 5 . 50 - .0 0. .0 .0 . 0.0 05.0 . 0 . 0 5. . 0.0 .
1.6250 1.2500 -0.55 0.03 2.48 2.52 0.13 4.33 4.13 0.15 0.07
4.84
. 5 . 50 - .0 .5 .0 0.0 0. 0.0 0 .0 . 0 . 0 5. . 0.0 . 0
1.6250 1.2500 -0.55 0.14 2.48 2.76 0.03 4.33 4.21 0.15 0.07
4.85
. 50 . .0 .5 .0 5.0 . .0 05.0 5. 0 .00 5 . 0.0 .
1.2500 0.9375 0.08 0.14 2.68 2.95 0.13 4.57 4.13 0.21 0.08
3.89
. .5 - . . .0 .0 . .0 0 .0 .50 . 0 0 . 0.0 5 . 0
1.7230 1.4375 -0.48 0.05 2.64 2.72 0.13 4.57 4.17 0.10 0.05
5.72
. .5 - . .5 .0 .0 . .0 0 .0 .50 . 0 0 . 0.0 5 .5
1.7230 1.4375 -0.48 0.14 2.64 2.87 0.13 4.57 4.17 0.10 0.05
5.71
. 5. 00 .0 .5 .0 .0 . .0 0 .0 . 0 . 0 5 . .5 0.0 5 .05
1.2910 1.0000 0.08 0.14 2.64 3.11 0.13 4.57 4.02 0.19 0.17
4.51
. 5. 00 .0 .5 .0 .0 . .0 0 .0 . 0 . 0 5 . .5 0.0 5 .05
1.2910 1.0000 0.08 0.14 2.64 3.11 0.13 4.57 4.02 0.19 0.17
4.51
. 0. - . .5 5.0 .0 . .0 0 .0 . 0 . 0 . 0. 0 .
1.4440 1.1875 -0.37 0.14 2.56 2.80 0.13 4.57 4.29 0.09 0.05
4.92
. 5. 00 .0 .5 .0 .0 . .0 0 .0 . 0 . 0 5 . .5 0.0 5 .
1.2910 1.0000 0.08 0.14 2.64 3.11 0.13 4.57 4.06 0.19 0.17
4.79
. 50 . 5 - . .5 .0 .0 . .0 0 .0 . 0 .00 . . 0.0 .
1.7500 1.3750 -0.37 0.14 2.80 3.03 0.13 4.69 4.21 0.16 0.04
6.14
5 . . 5 - . .5 .0 .0 . .0 0 .0 . 0 . 0 0 . 0.0 5 . 5
2.0625 1.6250 -0.77 0.14 2.64 2.91 0.13 4.61 4.25 0.09 0.10
7.16
0. . . .5 .0 .0 . .5 0 .0 5.00 . 0 5 . .5 0.0 .
1.2175 0.9375 0.31 0.14 2.91 3.11 0.13 4.87 4.29 0.20 0.17
4.69
. . 5. .5 .0 .0 . .5 0 .0 . 0 . 0 5 . .5 0.0 .
1.3125 0.9375 0.21 0.14 2.91 3.11 0.13 4.87 4.29 0.29 0.17
4.90
0. . . .5 .0 .0 .5 .0 .0 5.00 . 0 5 . .5 0.0 . 5
1.2175 0.8641 0.31 0.14 2.91 3.11 0.14 4.84 4.41 0.20 0.17
4.96
. .5 0 . .5 .5 .0 . 0.0 5.0 . 0 . 0 . . 0.0 .5
1.3085 0.9260 0.33 0.14 3.05 3.31 0.13 5.12 4.53 0.25 0.19
5.72
. 5 . 50 - . .5 .0 .0 . 5.0 .0 . 0 . 0 0 0.0 .
1.6250 1.2500 -0.44 0.14 2.64 2.87 0.13 4.92 4.65 0.16 0.08
6.88
. .5 0 . 0. .5 .0 . .0 .0 . 0 . 0 . . 0.0 . 5
1.3085 0.9260 0.33 0.03 3.05 3.11 0.09 5.20 4.61 0.25 0.19
6.07
. .5 0 . .5 .5 .0 . .0 .0 . 0 . 0 . . 0.0 . 5
1.3085 0.9260 0.33 0.14 3.05 3.31 0.09 5.20 4.61 0.25 0.19
6.06
.5 .5 5 - . .5 .0 .0 . 00.0 .0 . 0 . 0 . . 0.0 0 .
1.4375 1.1250 -0.29 0.14 2.48 2.87 0.13 3.94 3.50 0.14 0.08
3.02
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
5 . 0 . . 00 5 000 0. 0 .0 00 000 . 0 000 5 5 A
2.1649 4.0625 1.5000 35800 9290 4720 46200
5 . 0.000 . 00 5 000 0. 0 .0 00 000 . 0 000 5 5 X
2.1649 4.3307 1.5000 35800 9290 4720 46200
5 . 5. 55 5 . 5 000 0. . 5 00 00 . 0 0 000 0
2.1649 5.3447 2.1250 66900 17300 9640 90900
55.000 0.000 .000 5000 0. 0 . 000 5 00 . 5 000 JLM50 A JLM50 0
2.1654 3.5433 0.9055 19100 4960 3410 27600
55.000 0.000 .000 5000 0. 0 . 000 5 00 . 5 000 JLM50 JLM50 0
2.1654 3.5433 0.9055 19100 4960 3410 27600
55.000 0.000 5.000 5000 0. 0 . 000 5 00 . 5 000 JLM50 A JLM50
2.1654 3.5433 0.9843 19100 4960 3410 27600
55.000 5.000 .000 000 0. . 00 000 . 000 JM 0 0 A JM 0 0 0
2.1654 3.7402 1.1417 27200 7040 4040 37700
55.000 5.000 .000 000 0. . 00 000 . 000 JM 0 0 JM 0 0 0
2.1654 3.7402 1.1417 27200 7040 4040 37700
55.000 5.000 0.000 000 0. . 00 000 . 000 JM 0 0 JM 0 0 0A
2.1654 3.7402 1.1811 27200 7040 4040 37700
55.000 . .000 00 0. 5 . 00 00 . 5 0 000 5 A
2.1654 3.8125 0.8268 18900 4910 2980 24100
55.000 . .000 00 0. 5 . 00 00 . 5 0 000 5X A
2.1654 3.8125 0.8268 18900 4910 2980 24100
55.000 . 5 .000 00 0. 5 . 00 00 . 5 0 000 5
2.1654 3.8750 0.8268 18900 4910 2980 24100
55.000 00.000 .000 00 0. 5 . 00 00 . 5 0 000 5 A
2.1654 3.9370 0.8268 18900 4910 2980 24100
55.000 0.000 .000 000 0. 5 . 50 00 00 . 5 000 JH 0 JH 0 0
2.1654 4.3307 1.5354 43700 11300 6720 56500
55.000 5.000 .000 5000 0. 0. 00 5 00 0. 5000 JW55 JW55 0
2.1654 4.5276 1.3386 30200 7840 11600 39200
55.000 5.000 .0 000 0. . 00 00 . 000 X X
2.1654 4.5276 1.6150 43200 11200 6020 54800
55.000 0.000 .00 000 0. .5 00 00 .5 000 5 A
2.1654 4.7244 1.1418 29900 7740 5100 41900
55.000 0.000 . 000 0. .5 00 00 .5 000 5
2.1654 4.7244 1.1730 29900 7740 5100 41900
55.000 0.000 . 000 0. .5 00 00 .5 000 5
2.1654 4.7244 1.1730 29900 7740 5100 41900
55.000 . 5 . 00 000 0. 5 . 5 00 00 . 000 55 55 A
2.1654 4.8750 1.5000 39700 10300 6100 55700
55.00 0.0 0 . 5 000 0. . 00 00 . 000 A A
2.1656 4.7260 1.6250 43200 11200 6020 54800
55.5 . 0 . 0 00 0. 0 . 5000 00 . 5 000 0
2.1875 3.8437 0.9688 21600 5610 3870 32000
55.5 0 . 50 . 000 0. . 00 00 . 000 -S 5 A
2.1875 4.2500 1.0938 28200 7320 4200 37200
55.5 0 . 50 . 000 0. . 00 00 . 000 -S 5 AS
2.1875 4.2500 1.0938 28200 7320 4200 37200
55.5 . . 5 000 0. . 5 00 00 . 000 55 55 5
2.1875 4.8125 1.7188 49200 12800 7830 73500
55.5 . 5 .5 000 0. 0. 00 5 00 0. 0 000 C
2.1875 4.8750 1.4375 37600 9760 12300 46800
55.5 . 5 .5 000 0. 0. 00 5 00 0. 0 000 C
2.1875 4.8750 1.4375 37600 9760 12300 46800
55.5 .000 .5 000 0.50 . 0 00 00 . 5 000 HM 0 HM 0
2.1875 5.0000 1.4375 40300 10400 8970 57600
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 5 0. - . 0. .0 .0 .5 .0 .0 . 0 0. 0 . . 0.0 . 0
1.4550 1.1875 -0.48 0.03 2.44 2.48 0.06 3.86 3.66 0.11 0.04
2.86
. 5 0. - . 0. .0 .0 . 00.0 5.0 . 0 0. 0 . . 0.0 .55
1.4550 1.1875 -0.48 0.03 2.44 2.48 0.13 3.94 3.74 0.11 0.04
3.43
5 .00 . 50 - . .5 0.0 .0 . .0 .0 .00 0.50 . 0.0 .0
2.2050 1.7500 -0.76 0.14 2.76 2.99 0.13 4.96 4.61 0.16 0.02
8.90
.000 .500 - . .5 0.0 .0 0.5 .0 .0 . 0 .50 5. 0. 0.0 5 0.5
0.9055 0.7283 -0.11 0.14 2.36 2.64 0.02 3.39 3.23 0.04 0.06
1.20
.000 .500 - . .5 .0 .0 0.5 .0 .0 . 0 .50 5. 0. 0.0 5 0.55
0.9055 0.7283 -0.11 0.06 2.40 2.48 0.02 3.39 3.23 0.04 0.06
1.21
.000 0.500 - . .5 0.0 .0 0.5 .0 .0 . 0 .50 5. 0. 0.0 5 0.5
0.9055 0.8071 -0.11 0.14 2.36 2.64 0.02 3.39 3.23 0.04 0.06
1.27
.000 .500 - . .0 .0 .0 .5 .0 5.0 . 0 . 0 5 . . 0.0 0.
1.1417 0.9252 -0.30 0.24 2.44 2.87 0.10 3.58 3.35 0.05 0.09
1.79
.000 .500 - . .5 .0 .0 .5 .0 5.0 . 0 . 0 5 . . 0.0 0.
1.1417 0.9252 -0.30 0.06 2.44 2.52 0.10 3.58 3.35 0.05 0.09
1.84
.000 .500 - . .5 .0 .0 .0 .0 .0 . 0 . 0 5 . . 0.0 0.
1.1417 0.9646 -0.30 0.06 2.44 2.52 0.08 3.58 3.43 0.05 0.09
1.90
. 5. 5 - .0 . .0 5.0 0. .0 .0 . 0 .00 5. 0.0 5 0.
0.8640 0.6250 -0.12 0.09 2.40 2.56 0.03 3.62 3.50 0.04 0.08
1.37
. 5. 5 - .0 .5 .0 .0 0. .0 .0 . 0 .00 5. 0.0 5 0.
0.8640 0.6250 -0.12 0.14 2.40 2.64 0.03 3.62 3.50 0.04 0.08
1.36
. . - .0 . .0 5.0 0. .0 0.0 . 0 .00 5. 0.0 5 0.
0.8640 0.7018 -0.12 0.09 2.40 2.56 0.03 3.62 3.54 0.04 0.08
1.47
. . - .0 . .0 5.0 .0 .0 .0 . 0 .00 5. 0.0 5 0. 0
0.8640 0.7018 -0.12 0.09 2.40 2.56 0.08 3.66 3.50 0.04 0.08
1.54
.000 .000 - . .0 .0 .0 .5 0 .0 .0 0. 0 . 0 . 0.0 0 .
1.5354 1.2598 -0.46 0.12 2.52 2.80 0.10 4.09 3.82 0.03 0.12
3.71
.000 .500 5. .0 .0 .0 .0 0 .0 5.0 5. 0 . 0 5 . . 0.0 .5
1.2205 0.9252 0.23 0.12 2.59 3.07 0.12 4.29 3.74 0.21 0.15
3.46
. 5 . - .0 .0 .0 0.0 .0 0 .0 0 .0 . 0 . 0 5. . 0.0 . 0
1.6250 1.2400 -0.55 0.12 2.52 2.76 0.12 4.25 3.98 0.15 0.07
4.18
.00 . - . 0. .0 .0 . .0 0 .0 .50 . 0 . 0. 0 .
1.1420 0.9230 -0.16 0.03 2.60 2.64 0.13 4.49 4.17 0.06 0.08
3.57
.00 . - . 0. .0 .0 .0 .0 0 .0 .50 . 0 . 0. 0 . 5
1.1420 0.9542 -0.16 0.03 2.60 2.64 0.08 4.49 4.21 0.06 0.08
3.64
.00 .000 - . 0. .0 .0 .0 .0 0 .0 .50 . 0 . 0. 0 . 0
1.1420 1.1417 -0.16 0.03 2.60 2.64 0.08 4.49 4.21 0.06 0.08
3.75
. 0. - . .5 .0 .0 . .0 0 .0 . 0 . 0 . 0. 0 . 0
1.4440 1.1875 -0.37 0.14 2.60 2.83 0.13 4.57 4.29 0.09 0.05
4.86
. 5 . 50 - .0 0. .0 5.0 . 0.0 0 .0 . 0 . 0 5. . 0.0 .
1.6250 1.2500 -0.55 0.03 2.52 2.56 0.13 4.33 4.06 0.15 0.07
4.72
. 0 . - . .5 .0 .0 0. .0 .0 . 0 . 0 5 0. 0.0 0.
0.9688 0.7656 -0.13 0.14 2.44 2.68 0.03 3.62 3.46 0.06 0.07
1.67
. . 5 - . . .0 .0 0. 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 0.8750 -0.28 0.09 2.44 2.60 0.03 3.94 3.82 0.09 0.05
2.51
. . 5 - . . .0 .0 . 00.0 5.0 . 0 . 0 5 . . 0.0 .
1.1542 0.8750 -0.28 0.09 2.44 2.60 0.09 3.94 3.74 0.09 0.05
2.50
. .5 - . . .0 0.0 . .0 0 .0 .50 . 0 0 . 0.0 5 .55
1.7230 1.4375 -0.48 0.05 2.68 2.76 0.13 4.57 4.17 0.10 0.05
5.62
. 5. 00 .0 .5 .0 0.0 . .0 0 .0 . 0 . 0 5 . .5 0.0 5 .0
1.2910 1.0000 0.08 0.14 2.64 3.15 0.13 4.57 4.02 0.19 0.17
4.43
. 5. 00 .0 .5 .0 0.0 . .0 0 .0 . 0 . 0 5 . .5 0.0 5 .0
1.2910 1.0000 0.08 0.14 2.64 3.15 0.13 4.57 4.02 0.19 0.17
4.43
.5 . - . .5 .0 .0 . .0 .0 .00 . 0 . . 0. 5 . 0
1.4375 1.0625 -0.15 0.14 2.83 3.07 0.13 4.76 4.37 0.16 0.05
5.08
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
55.5 .000 .5 000 0.50 . 0 00 00 . 5 000 HM 0 HM
2.1875 5.0000 1.4375 40300 10400 8970 57600
55.5 5 . .000 00 0. 5 . 00 00 . 5 0 000 A
2.1880 3.8125 0.8268 18900 4910 2980 24100
55.5 5 00.000 .000 00 0. 5 . 00 00 . 5 0 000 A
2.1880 3.9370 0.8268 18900 4910 2980 24100
5 . 50 . . 5 5 00 0. .5 5 00 0000 .50 5 00 L50 L50 0
2.2500 3.4375 0.7188 13100 3380 2250 21500
5 . 50 . .000 00 0. 5 . 00 00 . 5 0 000 A
2.2500 3.8125 0.8268 18900 4910 2980 24100
5 . 50 . .000 00 0. 5 . 00 00 . 5 0 000 A A
2.2500 3.8125 0.8268 18900 4910 2980 24100
5 . 50 . .000 00 0. 5 . 00 00 . 5 0 000 AS A
2.2500 3.8125 0.8268 18900 4910 2980 24100
5 . 50 . .000 00 0. 5 . 00 00 . 5 0 000 -S A
2.2500 3.8125 0.8268 18900 4910 2980 24100
5 . 50 . . 0 00 0. 0 . 5000 00 . 5 000
2.2500 3.8125 0.9688 21600 5610 3870 32000
5 . 50 . 5. 00 00 0. 5 . 00 00 . 5 0 000 A -S
2.2500 3.8125 1.0000 18900 4910 2980 24100
5 . 50 . 0 . 0 00 0. 0 . 5000 00 . 5 000
2.2500 3.8437 0.9688 21600 5610 3870 32000
5 . 50 . 5 .000 00 0. 5 . 00 00 . 5 0 000
2.2500 3.8750 0.8268 18900 4910 2980 24100
5 . 50 . 5 .000 00 0. 5 . 00 00 . 5 0 000 A
2.2500 3.8750 0.8268 18900 4910 2980 24100
5 . 50 . 5 .000 00 0. 5 . 00 00 . 5 0 000 AS
2.2500 3.8750 0.8268 18900 4910 2980 24100
5 . 50 . 5 .000 00 0. 5 . 00 00 . 5 0 000 -S
2.2500 3.8750 0.8268 18900 4910 2980 24100
5 . 50 . 5 . 0 00 0. 0 . 5000 00 . 5 000
2.2500 3.8750 0.9688 21600 5610 3870 32000
5 . 50 00.000 .000 00 0. 5 . 00 00 . 5 0 000 A A
2.2500 3.9370 0.8268 18900 4910 2980 24100
5 . 50 00.000 5. 00 00 0. 5 . 00 00 . 5 0 000 X
2.2500 3.9370 1.0000 18900 4910 2980 24100
5 . 50 0 . 5 0. 000 0. . 0 00 0 00 . 000 5 5 0
2.2500 4.1250 1.1875 31900 8270 4710 42600
5 . 50 0 . 5 0. 000 0. . 0 00 0 00 . 000 5 5
2.2500 4.1250 1.1875 31900 8270 4710 42600
5 . 50 0 . 5 0. 000 0. . 0 00 0 00 . 000 5 0 5 0
2.2500 4.1250 1.1875 31900 8270 4710 42600
5 . 50 0 . 5 0. 000 0. . 0 00 0 00 . 000 5 0 5
2.2500 4.1250 1.1875 31900 8270 4710 42600
5 . 50 0 . 5 0. 000 0. . 0 00 0 00 . 000 5 5 0
2.2500 4.1250 1.1875 31900 8270 4710 42600
5 . 50 0 . 5 0. 000 0. . 0 00 0 00 . 000 5 5
2.2500 4.1250 1.1875 31900 8270 4710 42600
5 . 50 0 . 5 0. 000 0. . 00 00 . 000 5 X
2.2500 4.1250 1.1875 28200 7320 4200 37200
5 . 50 0 . 5 0. 000 0. . 00 00 . 000 A 5 X
2.2500 4.1250 1.1875 28200 7320 4200 37200
5 . 50 0 . 5 0. 000 0. . 00 00 . 000 5 X
2.2500 4.1250 1.1875 28200 7320 4200 37200
5 . 50 0 . 50 . 000 0. . 00 00 . 000 5 A
2.2500 4.2500 1.0938 28200 7320 4200 37200
B
Caption:
Caption:
C
D
B
d
a
B 00 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.5 . - . .5 .0 .0 .5 .0 .0 .00 . 0 . . 0. 5 . 0
1.4375 1.0625 -0.15 0.14 2.83 3.07 0.06 4.76 4.45 0.16 0.05
5.08
. 5. 5 - .0 . .0 5.0 0. .0 .0 . 0 .00 5. 0.0 5 0.
0.8640 0.6250 -0.12 0.09 2.40 2.56 0.03 3.62 3.50 0.04 0.08
1.35
. . - .0 . .0 5.0 .0 .0 .0 . 0 .00 5. 0.0 5 0.
0.8640 0.7018 -0.12 0.09 2.40 2.56 0.08 3.66 3.50 0.04 0.08
1.52
. 5 . -0. .5 .0 5.0 .5 .0 .0 0. 0 .00 . . 0.0 0.
0.7188 0.5625 -0.03 0.06 2.44 2.56 0.06 3.27 3.11 0.01 0.08
0.85
. 5. 5 - .0 . .0 .0 0. .0 .0 . 0 .00 5. 0.0 5 0.5
0.8640 0.6250 -0.12 0.09 2.44 2.60 0.03 3.62 3.50 0.04 0.08
1.30
. 5. 5 - .0 .5 .0 .0 0. .0 .0 . 0 .00 5. 0.0 5 0.5
0.8640 0.6250 -0.12 0.14 2.44 2.72 0.03 3.62 3.50 0.04 0.08
1.29
. 5. 5 - .0 5.0 .0 .0 0. .0 .0 . 0 .00 5. 0.0 5 0.5
0.8640 0.6250 -0.12 0.20 2.44 2.83 0.03 3.62 3.50 0.04 0.08
1.26
. 5. 5 - .0 0. .0 .0 0. .0 .0 . 0 .00 5. 0.0 5 0.5
0.8640 0.6250 -0.12 0.03 2.44 2.48 0.03 3.62 3.50 0.04 0.08
1.31
. 0 . - . .5 .0 0.0 0. .0 .0 . 0 . 0 5 0. 0.0 0.
0.9688 0.7656 -0.13 0.14 2.48 2.76 0.03 3.62 3.46 0.06 0.07
1.57
. 0. - .0 .5 .0 .0 . .0 .0 . 0 .00 5. 0.0 5 0. 5
0.8640 0.7982 -0.12 0.14 2.44 2.72 0.09 3.58 3.43 0.04 0.08
1.43
. 0 . - . .5 .0 0.0 0. .0 .0 . 0 . 0 5 0. 0.0 0.
0.9688 0.7656 -0.13 0.14 2.48 2.76 0.03 3.62 3.46 0.06 0.07
1.61
. . - .0 . .0 .0 0. .0 0.0 . 0 .00 5. 0.0 5 0.
0.8640 0.7018 -0.12 0.09 2.44 2.60 0.03 3.62 3.54 0.04 0.08
1.40
. . - .0 .5 .0 .0 0. .0 0.0 . 0 .00 5. 0.0 5 0.
0.8640 0.7018 -0.12 0.14 2.44 2.72 0.03 3.62 3.54 0.04 0.08
1.39
. . - .0 5.0 .0 .0 0. .0 0.0 . 0 .00 5. 0.0 5 0.
0.8640 0.7018 -0.12 0.20 2.44 2.83 0.03 3.62 3.54 0.04 0.08
1.36
. . - .0 0. .0 .0 0. .0 0.0 . 0 .00 5. 0.0 5 0.
0.8640 0.7018 -0.12 0.03 2.44 2.48 0.03 3.62 3.54 0.04 0.08
1.41
. 0 . - . .5 .0 0.0 0. .0 .0 . 0 . 0 5 0. 0.0 0. 5
0.9688 0.7656 -0.13 0.14 2.48 2.76 0.03 3.66 3.46 0.06 0.07
1.65
. . - .0 .5 .0 .0 .0 .0 .0 . 0 .00 5. 0.0 5 0.
0.8640 0.7018 -0.12 0.14 2.44 2.72 0.08 3.66 3.50 0.04 0.08
1.45
. . 5 - .0 . .0 .0 . .0 .0 . 0 .00 5. 0.0 5 0.
0.8640 0.8750 -0.12 0.09 2.44 2.60 0.05 3.66 3.50 0.04 0.08
1.67
0. 5 . - . 0. 5.0 5.0 . .0 .0 . 0 . 0 .5 . 0.0 .0
1.2188 0.9375 -0.32 0.03 2.56 2.56 0.13 3.90 3.66 0.08 0.07
2.39
0. 5 . - . 0. 5.0 5.0 0. .0 5.0 . 0 . 0 .5 . 0.0 .0
1.2188 0.9375 -0.32 0.03 2.56 2.56 0.03 3.90 3.74 0.08 0.07
2.40
0. 5 . - . . 5.0 .0 . .0 .0 . 0 . 0 .5 . 0.0 .0
1.2188 0.9375 -0.32 0.09 2.56 2.68 0.13 3.90 3.66 0.08 0.07
2.39
0. 5 . - . . 5.0 .0 0. .0 5.0 . 0 . 0 .5 . 0.0 .0
1.2188 0.9375 -0.32 0.09 2.56 2.68 0.03 3.90 3.74 0.08 0.07
2.40
0. 5 . - . . 5.0 .0 . .0 .0 . 0 . 0 .5 . 0.0 .05
1.2188 0.9375 -0.32 0.25 2.56 2.99 0.13 3.90 3.66 0.08 0.07
2.32
0. 5 . - . . 5.0 .0 0. .0 5.0 . 0 . 0 .5 . 0.0 .0
1.2188 0.9375 -0.32 0.25 2.56 2.99 0.03 3.90 3.74 0.08 0.07
2.33
. . 05 - . . .0 .0 . .0 .0 . 0 . 0 5 . . 0.0 .05
1.1542 0.9687 -0.28 0.09 2.48 2.64 0.13 3.86 3.62 0.09 0.05
2.31
. . 05 - . . .0 .0 . .0 .0 . 0 . 0 5 . . 0.0 .0
1.1542 0.9687 -0.28 0.09 2.68 2.64 0.13 3.86 3.62 0.09 0.05
2.29
. . 05 - . .5 .0 0.0 . .0 .0 . 0 . 0 5 . . 0.0 .0
1.1542 0.9687 -0.28 0.14 2.48 2.76 0.13 3.86 3.62 0.09 0.05
2.30
. . 5 - . . .0 .0 0. 00.0 .0 . 0 . 0 5 . . 0.0 . 0
1.1542 0.8750 -0.28 0.09 2.48 2.64 0.03 3.94 3.82 0.09 0.05
2.43
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 0
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
5 . 50 0 . 50 . 000 0. . 00 00 . 000
5 AS
5 A
5 A
0 A
0 AS
5
5 0
0 0
0
5 0 5 0
5 0 5
5 5 0
5
-S
A
5 5 0
5C
555-S 55
555-S 55 A
555-S 55 A
5 5 5500
555-S 55 -SA
5 0
0
5C 5
5
5 55
2.2500 4.2500 1.0938 28200 7320 4200 37200
5 . 50 0 . 50 . 000 0. . 00 00 . 000
B
Caption:
2.2500 4.2500 1.0938 28200 7320 4200 37200
5 . 50 0 . 50 .55 000 0. . 00 00 . 000
2.2500 4.2500 1.2818 28200 7320 4200 37200
5 . 50 0.000 .000 00 0. 0 . 00 00 . 5 5000
2.2500 4.3307 0.8661 20600 5340 3670 28100
5 . 50 0.000 .000 00 0. 0 . 00 00 . 5 5000
2.2500 4.3307 0.8661 20600 5340 3670 28100
5 . 50 0.000 . 5 000 0. . 00 00 . 000
Caption:
2.2500 4.3307 1.0943 28200 7320 4200 37200
5 . 50 . 5. 00 0 000 0. . 500 00 . 0 000
2.2500 4.4375 1.0000 23000 5960 4980 37200
5 . 50 . . 00 0. 0 . 00 00 . 5 5000
2.2500 4.4375 1.0617 20600 5340 3670 28100
5 . 50 . 0. 000 0. 0 . 00 00 . 5 000
T
C
2.2500 4.4375 1.1875 28900 7490 5160 43000
5 . 50 . 0. 55000 0. . 0 00 00 . 000
2.2500 4.4375 1.1875 34700 9010 5230 50300
5 . 50 . 0. 55000 0. . 0 00 00 . 000
D
2.2500 4.4375 1.1875 34700 9010 5230 50300
5 . 50 . 0. 55000 0. . 0 00 00 . 000
B
d
2.2500 4.4375 1.1875 34700 9010 5230 50300
5 . 50 . 5 . 000 0. 0. 5 00 00 0. 000
2.2500 4.6250 1.3125 31000 8040 8620 37300
5 . 50 0. 50 . 5 000 0. . 00 00 . 000
a
2.2500 4.7500 1.6250 43200 11200 6020 54800
5 . 50 0. 50 . 5 000 0. . 00 00 . 000
2.2500 4.7500 1.6250 43200 11200 6020 54800
5 . 50 0. 50 . 5 000 0. . 00 00 . 000
2.2500 4.7500 1.6250 43200 11200 6020 54800
5 . 50 . . 000 0. 0. 0 00 00 0. 000
2.2500 4.8125 1.3125 32200 8340 9500 39900
5 . 50 . 5 .5 000 0. 0. 00 5 00 0. 0 000
2.2500 4.8750 1.4375 37600 9760 12300 46800
5 . 50 . 5 . 00 000 0. 5 . 5 00 00 . 000
2.2500 4.8750 1.5000 39700 10300 6100 55700
5 . 50 . 5 . 00 000 0. 5 . 5 00 00 . 000
2.2500 4.8750 1.5000 39700 10300 6100 55700
5 . 50 5.000 . 00 000 0. 5 . 5 00 00 . 000
2.2500 4.9213 1.5000 39700 10300 6100 55700
5 . 50 .000 . 50 5000 0. . 5 500 00 . 0 000
2.2500 5.0000 1.7500 50700 13100 11000 66700
5 . 50 . . 00 000 0. 5 . 5 00 00 . 000
2.2500 5.1159 1.5000 39700 10300 6100 55700
5 . 50 5. 55 5 . 5 000 0. . 5 00 00 . 0 0 000
2.2500 5.3447 2.1250 66900 17300 9640 90900
5 . 50 5. 55 5 . 5 000 0. . 5 00 00 . 0 0 000
2.2500 5.3447 2.1250 66900 17300 9640 90900
5 . 50 .5 5 .5 5000 0. 0. 00 000 0. 000
2.2500 5.3750 1.4375 41500 10800 16000 52600
5 . 50 .5 5 . 5 000 0. . 55 00 00 . 000
2.2500 5.3750 1.6250 48500 12600 7790 67000
5 . 50 0.0 0 .5 5 000 0. 0. 00 0 00 0. 000
2.2500 5.5130 1.4375 35600 9230 13700 43400
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B 0 TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. . 5 - . . .0 .0 . 00.0 5.0 . 0 . 0 5 . . 0.0 . 0
1.1542 0.8750 -0.28 0.09 2.48 2.64 0.09 3.94 3.74 0.09 0.05
2.43
. . 5 - . .5 .0 0.0 0. 00.0 .0 . 0 . 0 5 . . 0.0 . 0
1.1542 0.8750 -0.28 0.14 2.48 2.76 0.03 3.94 3.82 0.09 0.05
2.42
. .000 - . . .0 .0 . 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 1.0630 -0.28 0.09 2.48 2.64 0.13 3.94 3.66 0.09 0.05
2.67
. . 5 -0. . .0 0.0 . 05.0 0 .0 . 0 . 0 5 . 0.0 0.
0.8660 0.7411 -0.03 0.09 2.60 2.76 0.05 4.13 3.98 0.07 0.09
2.07
. . 5 -0. . .0 0.0 . 0 .5 .0 . 0 . 0 5 . 0.0 0.
0.8660 0.7411 -0.03 0.09 2.60 2.76 0.13 4.11 3.90 0.07 0.09
2.04
. .000 - . . .0 .0 .0 00.0 .0 . 0 . 0 5 . . 0.0 .
1.1542 1.0630 -0.28 0.09 2.48 2.64 0.08 3.94 3.78 0.09 0.05
2.71
5. 00 .050 .0 .5 .0 5.0 . 0 .0 0 .0 . 0 .50 . . 0. 0 .
1.0000 0.7500 0.04 0.14 2.72 2.95 0.13 4.29 3.98 0.09 0.06
2.67
. . -0. . .0 0.0 . 0 .0 .0 . 0 . 0 5 . 0.0 .
0.8660 0.9375 -0.03 0.09 2.60 2.76 0.13 4.17 3.90 0.07 0.09
2.47
0.0 . - . .5 .0 .0 . 0 .0 .0 . 0 . 0 5. . 0. 0 .
1.1830 0.9375 -0.18 0.14 2.60 2.83 0.13 4.17 3.90 0.09 0.04
3.01
0. . - . .5 .0 .0 . 0 .0 0 .0 . 0 . 0 . . 0. 0 .
1.1875 0.9375 -0.26 0.14 2.60 2.83 0.13 4.21 3.98 0.06 0.10
3.03
0. . - . .5 .0 .0 0. 0 .0 0 .0 . 0 . 0 . . 0. 0 .
1.1875 0.9375 -0.26 0.14 2.60 2.83 0.03 4.21 4.06 0.06 0.10
3.04
0. . - . .0 .0 .0 . 0 .0 0 .0 . 0 . 0 . . 0. 0 .
1.1875 0.9375 -0.26 0.31 2.60 3.19 0.13 4.21 3.98 0.06 0.10
2.95
. 50 . -0. .5 .0 .0 . .0 00.0 5.00 .00 50. . 0.0 5 .50
1.2500 0.9375 -0.01 0.14 2.71 2.99 0.13 4.37 3.94 0.20 0.08
3.31
. 5 . 50 - .0 .5 .0 .0 . 0.0 05.0 . 0 . 0 5. . 0.0 . 0
1.6250 1.2500 -0.55 0.14 2.60 2.83 0.13 4.33 4.13 0.15 0.07
4.62
. 5 . 50 - .0 .5 .0 .0 0. 0.0 0 .0 . 0 . 0 5. . 0.0 .
1.6250 1.2500 -0.55 0.14 2.60 2.83 0.03 4.33 4.21 0.15 0.07
4.65
. 5 . 50 - .0 . .0 .0 . 0.0 05.0 . 0 . 0 5. . 0.0 .0
1.6250 1.2500 -0.55 0.25 2.60 3.07 0.13 4.33 4.13 0.15 0.07
4.57
. 50 . .0 .5 .0 .0 . .0 05.0 5. 0 .00 5 . 0.0 .
1.2500 0.9375 0.08 0.14 2.80 3.03 0.13 4.57 4.13 0.21 0.08
3.74
. 5. 00 .0 .5 .0 .0 . .0 0 .0 . 0 . 0 5 . .5 0.0 5 .
1.2910 1.0000 0.08 0.14 2.64 3.19 0.13 4.57 4.02 0.19 0.17
4.36
. . - . .5 .0 .0 . .0 0 .0 . 0 . 0 . 0. 0 . 0
1.4440 1.3125 -0.37 0.14 2.64 2.87 0.13 4.57 4.29 0.09 0.05
4.84
. 0. - . .5 .0 .0 . .0 0 .0 . 0 . 0 . 0. 0 . 5
1.4440 1.1875 -0.37 0.14 2.64 2.87 0.13 4.57 4.29 0.09 0.05
4.74
. 0. - . .5 .0 .0 . .0 0 .0 . 0 . 0 . 0. 0 . 0
1.4440 1.1875 -0.37 0.14 2.64 2.87 0.13 4.57 4.29 0.09 0.05
4.85
. 50 . 5 - . .5 .0 0.0 . .0 0 .0 . 0 .00 . . 0.0 .
1.7500 1.3750 -0.37 0.14 2.79 3.15 0.13 4.69 4.21 0.16 0.04
5.93
. 0. - . .5 .0 .0 . .0 .0 . 0 . 0 . 0. 0 .
1.4440 1.1875 -0.37 0.14 2.64 2.87 0.13 4.57 4.37 0.09 0.05
5.37
5 .00 . 50 - . . .0 0.0 . .0 .0 .00 0.50 . 0.0 . 5
2.2050 1.7500 -0.76 0.17 2.83 3.15 0.13 4.96 4.61 0.16 0.02
8.71
5 .00 . 50 - . 0. .0 .0 . .0 .0 .00 0.50 . 0.0 .
2.2050 1.7500 -0.76 0.03 2.83 2.83 0.13 4.96 4.61 0.16 0.02
8.74
. .5 0 . .5 .5 .0 . 0.0 5.0 . 0 . 0 . . 0.0 .5
1.3085 0.9260 0.33 0.14 3.05 3.39 0.13 5.12 4.53 0.25 0.19
5.56
. 5 . 50 - . .5 .0 5.0 . 5.0 .0 . 0 . 0 0 0.0 .0
1.6250 1.2500 -0.44 0.14 2.72 2.95 0.13 4.92 4.65 0.16 0.08
6.68
. .5 0 . .5 .0 .0 . .0 .0 . 0 . 0 . . 0.0 .5
1.3085 0.9260 0.31 0.14 3.03 3.27 0.09 5.20 4.61 0.27 0.16
5.66
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 0
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
5 . 50 0.0 0 .5 5000 0. 0. 00 000 0. 000 5C 55
2.2500 5.5130 1.4375 41500 10800 16000 52600
5 . 50 . 5 5 . 5 000 0. . 00 5 00 . 000 55 0
2.2500 5.8750 2.1250 72200 18700 11600 104000
5 . 50 . 5 5 . 5 000 0. . 00 5 00 . 000 5 0
2.2500 5.8750 2.1250 72200 18700 11600 104000
5 . 50 . 5 5 . 5 000 0. . 00 5 00 . 000 5 0A
2.2500 5.8750 2.1250 72200 18700 11600 104000
5 . 50 5 . 00 5 . 5 000 0. . 00 00 . 0 000 HH 5 0 HH 5 0
2.2500 6.0000 2.1250 70500 18300 15200 95000
5 .5 . .000 00 0. 5 . 00 00 . 5 0 000 A A
2.2650 3.8125 0.8268 18900 4910 2980 24100
5 .5 . 5 .000 00 0. 5 . 00 00 . 5 0 000 A
2.2650 3.8750 0.8268 18900 4910 2980 24100
5 .5 00.000 .000 00 0. 5 . 00 00 . 5 0 000 A A
2.2650 3.9370 0.8268 18900 4910 2980 24100
5 . . 0. 000 0. 0 . 00 00 . 5 000 0
2.3125 4.4375 1.1875 28900 7490 5160 43000
5 . .000 . 50 5000 0. . 5 500 00 . 0 000 5 5500
2.3125 5.0000 1.7500 50700 13100 11000 66700
5 .5 0 . 0. 000 0. 0 . 00 00 . 5 000 0
2.3437 4.4375 1.1875 28900 7490 5160 43000
5 . 0 .000 . 50 5000 0. . 5 500 00 . 0 000 5 5 5500
2.3575 5.0000 1.7500 50700 13100 11000 66700
5 . 50.0 . 50 000 0. . 00 500 . 0 000 5
2.3595 5.9090 1.7500 66100 17100 9550 93800
5 . 00.000 5. 00 00 0. . 5500 500 . 000 0
2.3613 3.9370 1.0000 22100 5720 4170 33500
5 . . . 000 0. 0. 0 00 00 0. 000 5 5 0
2.3613 4.8125 1.3125 32200 8340 9500 39900
5 . 0 . 5 . 00 0. .55 00 5 00 .5 0000
2.3617 4.1250 0.8438 20100 5220 3470 27000
5 . 0 . 5 . 5 000 0. 0 . 00 00 . 5 000 X XA
2.3617 4.3301 1.1713 28900 7490 5160 43000
5 . 0.05 .000 00 0. .55 00 5 00 .5 0000
2.3617 4.3330 0.8661 20100 5220 3470 27000
5 . . 0. 000 0. 0 . 00 00 . 5 000 X 0
2.3617 4.4375 1.1875 28900 7490 5160 43000
5 . 5.000 . 00 000 0. 5 . 5 00 00 . 000 55 -S 55 A
2.3617 4.9213 1.5000 39700 10300 6100 55700
5 . .000 .5 000 0.50 . 0 00 00 . 5 000 HM HM 0
2.3617 5.0000 1.4375 40300 10400 8970 57600
5 . . . 00 000 0. 5 . 5 00 00 . 000 55 -S 55 -SA
2.3617 5.1159 1.5000 39700 10300 6100 55700
5 . 0. 5 . 00 5 000 0. 0. 0000 5 00 0. 000 HM HM 0
2.3617 5.1250 1.3425 34700 9000 12600 41100
5 . . . 5 000 0. 0. 0000 5 00 0. 000 HM HM
2.3617 5.3143 1.3169 34700 9000 12600 41100
5 . .050 . 5 000 0. 0. 55 00 000 0. 5 5 000 H 0 H 0
2.3617 5.7500 1.6250 47900 12400 16600 57500
0.000 5.000 .000 0 00 0. 0 . 00 00 . 5 5000 JLM50 JLM50 0
2.3622 3.7402 0.9449 20300 5270 3620 30400
0.000 00.000 .000 0 00 0. . 000 000 . 0 000 JP 0 JP 0 0
2.3622 3.9370 0.8268 18200 4710 3820 22800
0.000 0 . 50 5. 00 0 000 0. . 00 0 00 . 000 5 0 5 0
2.3622 4.2500 1.0000 22900 5950 4670 36300
B
Caption:
Caption:
C
D
B
d
a
B 0 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. .5 0 . .5 .5 .0 . .0 .0 . 0 . 0 . . 0.0 .
1.3085 0.9260 0.33 0.14 3.05 3.39 0.09 5.20 4.61 0.25 0.19
5.90
5 . . 50 - 5.0 .5 5.0 .0 . 0.0 .0 . 0 0. 0 5 . 0.0 5.0
2.1350 1.7500 -0.59 0.14 2.95 3.19 0.13 5.51 5.08 0.11 0.03
11.20
5 . . 50 - 5.0 . 5.0 .0 . 0.0 .0 . 0 0. 0 5 . 0.0 5.05
2.1350 1.7500 -0.59 0.27 2.95 3.46 0.13 5.51 5.08 0.11 0.03
11.14
5 . . 50 - 5.0 . 5.0 .0 0. 0.0 .0 . 0 0. 0 5 . 0.0 5.0
2.1350 1.7500 -0.59 0.27 2.95 3.46 0.03 5.51 5.16 0.11 0.03
11.18
5 . 50 . 5 - . .5 .0 .0 . .0 0.0 5. 0 0. 0 0 .5 0.0 5 5.
2.2500 1.6250 -0.48 0.14 3.19 3.43 0.13 5.63 5.12 0.21 0.01
11.65
. 5. 5 - .0 .5 .0 .0 0. .0 .0 . 0 .00 5. 0.0 5 0.5
0.8640 0.6250 -0.12 0.14 2.48 2.72 0.03 3.62 3.50 0.04 0.08
1.27
. . - .0 .5 .0 .0 0. .0 0.0 . 0 .00 5. 0.0 5 0.
0.8640 0.7018 -0.12 0.14 2.48 2.72 0.03 3.62 3.54 0.04 0.08
1.37
. . - .0 .5 .0 .0 .0 .0 .0 . 0 .00 5. 0.0 5 0. 5
0.8640 0.7018 -0.12 0.14 2.48 2.72 0.08 3.66 3.50 0.04 0.08
1.44
0.0 . - . .5 .0 .0 . 0 .0 .0 . 0 . 0 5. . 0. 0 .
1.1830 0.9375 -0.18 0.14 2.64 2.87 0.13 4.17 3.90 0.09 0.04
2.94
. 50 . 5 - . .5 .0 .0 . .0 0 .0 . 0 .00 . . 0.0 .
1.7500 1.3750 -0.37 0.14 2.79 3.19 0.13 4.69 4.21 0.16 0.04
5.82
0.0 . - . .5 .0 0.0 . 0 .0 .0 . 0 . 0 5. . 0. 0 .
1.1830 0.9375 -0.18 0.06 2.68 2.76 0.13 4.17 3.90 0.09 0.04
2.92
. 50 . 5 - . .5 .0 .0 . .0 0 .0 . 0 .00 . . 0.0 . 0
1.7500 1.3750 -0.37 0.14 2.79 3.23 0.13 4.69 4.21 0.16 0.04
5.74
. .5 - . .5 5.0 .0 . .0 .0 . 0 . 0 0 . 0.0 .
1.8375 1.4375 -0.47 0.14 2.95 3.19 0.13 5.59 5.28 0.07 0.05
9.44
5. 00 . 5 - .5 .5 .0 .0 . .0 .0 .00 . 0 0. .5 0. 0 0.
1.0000 0.7813 -0.10 0.14 2.64 2.87 0.13 3.78 3.50 0.08 0.05
1.67
. 50 . .0 .5 .0 5.0 . .0 05.0 5. 0 .00 5 . 0.0 .
1.2500 0.9375 0.08 0.06 2.87 2.95 0.13 4.57 4.13 0.21 0.08
3.61
.000 5. 5 - .5 . .0 .0 .0 00.0 .0 . 0 . 0 5 . .5 0.0 0.
0.8661 0.6250 -0.06 0.09 2.64 2.80 0.08 3.94 3.78 0.07 0.09
1.63
.000 . - . . .0 .0 0.5 0 .5 00.0 . 0 . 0 5. . 0. 0 . 0
1.1024 0.9375 -0.18 0.09 2.68 2.83 0.02 4.12 3.94 0.09 0.12
2.65
.000 . - .5 . .0 .0 . 0 .0 .0 . 0 . 0 5 . .5 0.0 0.
0.8661 0.6786 -0.06 0.09 2.64 2.80 0.09 4.06 3.86 0.07 0.09
1.92
.000 . - . . .0 .0 . 0 .0 .0 . 0 . 0 5. . 0. 0 .
1.1024 0.9375 -0.18 0.09 2.68 2.83 0.13 4.17 3.90 0.09 0.12
2.83
. 0. - . .5 .0 5.0 . .0 0 .0 . 0 . 0 . 0. 0 .
1.4440 1.1875 -0.37 0.14 2.72 2.95 0.13 4.57 4.29 0.09 0.05
4.69
.5 . - . .5 5.0 .0 . .0 .0 .00 . 0 . . 0. 5 .
1.4375 1.0625 -0.15 0.14 2.95 3.23 0.13 4.76 4.37 0.16 0.05
4.82
. 0. - . .5 .0 5.0 . .0 .0 . 0 . 0 . 0. 0 .
1.4440 1.1875 -0.37 0.14 2.72 2.95 0.13 4.57 4.37 0.09 0.05
5.20
0. . . .5 .5 .0 . .5 0 .0 5.00 . 0 5 . .5 0.0 .00
1.2175 0.9375 0.31 0.14 2.93 3.31 0.13 4.87 4.29 0.20 0.17
4.40
0. . . .5 .5 .0 .5 .0 .0 5.00 . 0 5 . .5 0.0 .
1.2175 0.8641 0.31 0.14 2.93 3.31 0.14 4.84 4.41 0.20 0.17
4.67
. 5. 00 . .5 .5 .0 . .0 .0 . 0 . 0 .5 . 0.0 .
1.5625 1.0000 0.17 0.14 3.24 3.46 0.13 5.43 4.88 0.32 0.14
6.99
.000 .000 - . 5.0 .0 5.0 .5 .0 5.0 .50 . 0 5 . 5. 0.0 0.5
0.9449 0.7480 -0.11 0.20 2.60 2.95 0.10 3.58 3.35 0.06 0.06
1.30
0.000 5.500 . .0 .0 .0 .0 5.5 .0 . 0 . 0 .5 .5 0.0 0. 0
0.7874 0.6102 0.05 0.08 2.60 2.72 0.08 3.76 3.58 0.06 0.11
1.32
5. 00 .050 -0. .5 .0 5.0 . 0 .0 .0 . 0 . 0 0. 5. 0. 0.
1.0000 0.7500 -0.03 0.14 2.68 2.95 0.13 4.06 3.78 0.08 0.05
2.16
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 05
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
0.000 0 . 50 5. 00 0 000 0. . 00 0 00 . 000 5 5 0
2.3622 4.2500 1.0000 22900 5950 4670 36300
0.000 0 . 50 5. 00 0 000 0. . 00 0 00 . 000 5 5
2.3622 4.2500 1.0000 22900 5950 4670 36300
0.000 0.000 .000 00 0. 0 . 00 00 . 5 5000 A
2.3622 4.3307 0.8661 20600 5340 3670 28100
0.000 0.000 .000 00 0. 0 . 00 00 . 5 5000 AS
2.3622 4.3307 0.8661 20600 5340 3670 28100
0.000 0.000 5. 00 0 000 0. . 00 0 00 . 000 5 0 5
2.3622 4.3307 1.0000 22900 5950 4670 36300
0.000 0.000 .000 000 0. 0 . 500 00 . 5 000 XAA Y
2.3622 4.3307 1.4961 41200 10700 7380 56800
0.000 0.000 .000 000 0. 0 . 500 00 . 5 000 XAB- Y
2.3622 4.3307 1.4961 41200 10700 7380 56800
0.000 . 0. 000 0. 0 . 00 00 . 5 000 0
2.3622 4.4375 1.1875 28900 7490 5160 43000
0.000 . 0. 000 0. 0 . 00 00 . 5 000 5
2.3622 4.4375 1.1875 28900 7490 5160 43000
0.000 0.000 . 000 0. .5 00 00 .5 000
2.3622 4.7244 1.1730 29900 7740 5100 41900
0.000 . . 000 0. 0. 0 00 00 0. 000 5 5 5 0
2.3622 4.8125 1.3125 32200 8340 9500 39900
0.000 5.000 .000 5 000 0. 0. 00 5 00 0. 0000 JW 0 JW 0 0
2.3622 4.9213 1.4567 35800 9270 13000 47100
0. 5 00.000 5. 00 00 0. . 5500 500 . 000 5
2.3750 3.9370 1.0000 22100 5720 4170 33500
0. 5 00.000 5. 00 00 0. . 5500 500 . 000 5 A
2.3750 3.9370 1.0000 22100 5720 4170 33500
0. 5 0 . 00 5. 00 00 0. . 5500 500 . 000 5 0
2.3750 4.0000 1.0000 22100 5720 4170 33500
0. 5 . 0. 000 0. 0 . 00 00 . 5 000 0 0
2.3750 4.4375 1.1875 28900 7490 5160 43000
0. 5 . 0. 000 0. 0 . 00 00 . 5 000 0 5
2.3750 4.4375 1.1875 28900 7490 5160 43000
0. 5 . . 00 0 000 0. . 5 00 00 . 000 HM 0 HM 0 0
2.3750 4.8125 1.5000 46900 12200 7030 62700
0. 5 . . 00 0 000 0. . 5 00 00 . 000 HM 0 HM 0
2.3750 4.8125 1.5000 46900 12200 7030 62700
0. 5 . . 5 000 0. . 5 00 00 . 000 55 55 5
2.3750 4.8125 1.7188 49200 12800 7830 73500
0. 5 . . 5 000 0. . 5 00 00 . 000 55 55 5
2.3750 4.8125 1.7188 49200 12800 7830 73500
0. 5 . 5 . 00 000 0. 5 . 5 00 00 . 000 55 55
2.3750 4.8750 1.5000 39700 10300 6100 55700
0. 5 . 5 . 00 000 0. 5 . 5 00 00 . 000 55 55 A
2.3750 4.8750 1.5000 39700 10300 6100 55700
0. 5 . 5 . 00 000 0. 5 . 5 00 00 . 000 55 A 55 A
2.3750 4.8750 1.5000 39700 10300 6100 55700
0. 5 .000 .5 000 0.50 . 0 00 00 . 5 000 HM A HM
2.3750 5.0000 1.4375 40300 10400 8970 57600
0. 5 .000 .5 000 0.50 . 0 00 00 . 5 000 HM HM 0
2.3750 5.0000 1.4375 40300 10400 8970 57600
0. 5 .000 .5 000 0.50 . 0 00 00 . 5 000 HM HM
2.3750 5.0000 1.4375 40300 10400 8970 57600
0. 5 .000 . 50 5000 0. . 5 500 00 . 0 000 5 5500
2.3750 5.0000 1.7500 50700 13100 11000 66700
B
Caption:
Caption:
C
D
B
d
a
B 0 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
5. 00 .050 -0. 0. .0 .0 . 0 .0 .0 . 0 . 0 0. 5. 0. 0.
1.0000 0.7500 -0.03 0.03 2.68 2.72 0.13 4.06 3.78 0.08 0.05
2.19
5. 00 .050 -0. 0. .0 .0 0. 0 .0 .0 . 0 . 0 0. 5. 0. .00
1.0000 0.7500 -0.03 0.03 2.68 2.72 0.03 4.06 3.86 0.08 0.05
2.21
. . 5 -0. 0. .0 .0 . 05.0 0 .0 . 0 . 0 5 . 0.0 0. 0
0.8660 0.7411 -0.03 0.03 2.68 2.72 0.05 4.13 3.98 0.07 0.09
1.98
. . 5 -0. 0. .0 .0 . 0 .5 .0 . 0 . 0 5 . 0.0 0.
0.8660 0.7411 -0.03 0.03 2.68 2.72 0.13 4.11 3.90 0.07 0.09
1.95
5. 00 .050 -0. .5 .0 5.0 . 0 .0 .0 . 0 . 0 0. 5. 0. .05
1.0000 0.7500 -0.03 0.14 2.68 2.95 0.05 4.09 3.90 0.08 0.05
2.31
.000 .000 - . .0 .0 5.0 .5 05.0 .0 .00 .50 . . 0.0 5 .5
1.4961 1.1417 -0.39 0.24 2.68 3.35 0.06 4.13 3.86 0.16 0.10
3.37
.000 .000 - . 5.0 .0 .0 .5 05.0 .0 .00 .50 . . 0.0 5 .5
1.4961 1.1417 -0.39 0.20 2.68 3.27 0.06 4.13 3.86 0.16 0.10
3.37
0.0 . - . .5 .0 .0 . 0 .0 .0 . 0 . 0 5. . 0. 0 . 0
1.1830 0.9375 -0.18 0.14 2.68 2.91 0.13 4.17 3.90 0.09 0.04
2.88
0.0 . - . .5 .0 .0 0. 0 .0 0 .0 . 0 . 0 5. . 0. 0 .
1.1830 0.9375 -0.18 0.14 2.68 2.91 0.03 4.17 3.98 0.09 0.04
2.91
.00 . - . .0 .0 .0 .0 .0 0 .0 .50 . 0 . 0. 0 .5
1.1420 0.9542 -0.16 0.08 2.72 2.87 0.08 4.49 4.21 0.06 0.08
3.40
. 50 . .0 .5 .0 .0 . .0 05.0 5. 0 .00 5 . 0.0 .
1.2500 0.9375 0.08 0.14 2.87 3.11 0.13 4.57 4.13 0.21 0.08
3.59
.500 .000 . .0 .0 .0 .0 .0 0 .0 .00 .00 . .5 0.0 .0
1.3189 1.0236 0.19 0.12 2.83 3.50 0.12 4.69 4.09 0.24 0.16
4.46
5. 00 . 5 - .5 .5 .0 .0 . .0 .0 .00 . 0 0. .5 0. 0 0. 5
1.0000 0.7813 -0.10 0.14 2.64 2.87 0.13 3.78 3.50 0.08 0.05
1.65
5. 00 . 5 - .5 .5 .0 .0 0. .0 .0 .00 . 0 0. .5 0. 0 0.
1.0000 0.7813 -0.10 0.14 2.64 2.87 0.03 3.78 3.58 0.08 0.05
1.68
5. 00 . 5 - .5 .5 .0 .0 . .0 0.0 .00 . 0 0. .5 0. 0 0.
1.0000 0.7813 -0.10 0.14 2.64 2.87 0.13 3.82 3.54 0.08 0.05
1.74
0.0 . - . .5 .0 5.0 . 0 .0 .0 . 0 . 0 5. . 0. 0 . 0
1.1830 0.9375 -0.18 0.14 2.68 2.95 0.13 4.17 3.90 0.09 0.04
2.86
0.0 . - . .5 .0 5.0 0. 0 .0 0 .0 . 0 . 0 5. . 0. 0 .
1.1830 0.9375 -0.18 0.14 2.68 2.95 0.03 4.17 3.98 0.09 0.04
2.89
. 5 . - 0. .0 0.0 5.0 .5 .0 0.0 . 0 .00 . . 0.0 5 .0
1.5100 1.1700 -0.43 0.31 2.76 3.35 0.06 4.57 4.33 0.09 0.12
4.46
. 5 . - 0. .0 0.0 5.0 . .0 0 .0 . 0 .00 . . 0.0 5 .0
1.5100 1.1700 -0.43 0.31 2.76 3.35 0.13 4.57 4.25 0.09 0.12
4.45
. .5 - . 0. .0 .0 . .0 0 .0 .50 . 0 0 . 0.0 5 . 0
1.7230 1.4375 -0.48 0.03 2.83 2.87 0.13 4.57 4.17 0.10 0.05
5.30
. .5 - . .5 .0 .0 . .0 0 .0 .50 . 0 0 . 0.0 5 .
1.7230 1.4375 -0.48 0.14 2.83 3.07 0.13 4.57 4.17 0.10 0.05
5.28
. . - . . .0 .0 . .0 0 .0 . 0 . 0 . 0. 0 .
1.4440 1.3125 -0.37 0.09 2.72 2.87 0.13 4.57 4.29 0.09 0.05
4.67
. 0. - . . .0 .0 . .0 0 .0 . 0 . 0 . 0. 0 .0
1.4440 1.1875 -0.37 0.09 2.72 2.87 0.13 4.57 4.29 0.09 0.05
4.57
. 0. - . .5 .0 .0 . .0 0 .0 . 0 . 0 . 0. 0 .0
1.4440 1.1875 -0.37 0.14 2.72 2.99 0.13 4.57 4.29 0.09 0.05
4.55
.5 . - . .5 .0 .0 .5 .0 .0 .00 . 0 . . 0. 5 .
1.4375 1.0625 -0.15 0.06 2.99 3.07 0.06 4.76 4.45 0.16 0.05
4.81
.5 . - . .5 .5 .0 . .0 .0 .00 . 0 . . 0. 5 .
1.4375 1.0625 -0.15 0.14 3.02 3.27 0.13 4.76 4.37 0.16 0.05
4.80
.5 . - . .5 .5 .0 .5 .0 .0 .00 . 0 . . 0. 5 .
1.4375 1.0625 -0.15 0.14 3.02 3.27 0.06 4.76 4.45 0.16 0.05
4.80
. 50 . 5 - . .5 .0 .0 . .0 0 .0 . 0 .00 . . 0.0 .5
1.7500 1.3750 -0.37 0.14 2.80 3.23 0.13 4.69 4.21 0.16 0.04
5.70
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 0
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
0. 5 .000 . 50 5000 0. . 5 500 00 . 0 000 5 550
2.3750 5.0000 1.7500 50700 13100 11000 66700
0. 5 .000 . 50 5000 0. . 5 500 00 . 0 000 5 A 5500
2.3750 5.0000 1.7500 50700 13100 11000 66700
0. 5 0. 5 .5 5 000 0. 0. 0000 5 00 0. 000 HM 5 HM 0
2.3750 5.1250 1.4375 34700 9000 12600 41100
0. 5 0. 5 . 5 000 0. . 55 00 00 . 000
2.3750 5.1250 1.6250 48500 12600 7790 67000
0. 5 5. 55 5 . 5 000 0. . 5 00 00 . 0 0 000 0
2.3750 5.3447 2.1250 66900 17300 9640 90900
0. 5 .5 5 .5 5000 0. 0. 00 000 0. 000 C 5
2.3750 5.3750 1.4375 41500 10800 16000 52600
0. 5 .5 5 . 5 000 0. . 55 00 00 . 000
2.3750 5.3750 1.6250 48500 12600 7790 67000
0. 5 .5 5 .0 5000 0. . 5 500 00 . 0 000 5 55
2.3750 5.3750 1.8125 50700 13100 11000 66700
0. 5 .5 5 .0 000 0. . 00 5 00 . 05000 H 5 H 5
2.3750 5.3750 1.8125 56000 14500 11800 91000
0. 5 . 00 .0 000 0. . 00 5 00 . 05000 H 5 H 5 0
2.3750 5.5000 1.8125 56000 14500 11800 91000
0. 5 0.0 0 .5 5000 0. 0. 00 000 0. 000 C 55
2.3750 5.5130 1.4375 41500 10800 16000 52600
0. 5 5 . 00 5 . 05 000 0. . 5000 0 00 . 0 5 000 HH 5 HH 5 0
2.3750 6.0000 2.0750 73700 19100 15900 101000
. 0.000 .000 00 0. 0 . 00 00 . 5 5000 A
2.4375 4.3307 0.8661 20600 5340 3670 28100
. . . 00 0. 0 . 00 00 . 5 5000 0
2.4375 4.4375 1.0617 20600 5340 3670 28100
. . 5 . 00 000 0. 5 . 5 00 00 . 000 55 55 A
2.4375 4.8750 1.5000 39700 10300 6100 55700
. .000 .5 000 0.50 . 0 00 00 . 5 000 HM HM 0
2.4375 5.0000 1.4375 40300 10400 8970 57600
. 0. 5 .5 5 000 0. 0. 0000 5 00 0. 000 HM HM 0
2.4375 5.1250 1.4375 34700 9000 12600 41100
. .5 5 .0 000 0. . 00 5 00 . 05000 H 5 H 5
2.4375 5.3750 1.8125 56000 14500 11800 91000
. . 00 .0 000 0. . 00 5 00 . 05000 H 5 H 5 0
2.4375 5.5000 1.8125 56000 14500 11800 91000
. .050 . 5 000 0. 0. 55 00 000 0. 5 5 000 H H 0
2.4375 5.7500 1.6250 47900 12400 16600 57500
. .050 . 5 000 0. 0. 55 00 000 0. 5 5 000 H H 0
2.4375 5.7500 1.6250 47900 12400 16600 57500
. 5 . 00 . 5 000 0. 0. 500 00 0. 0 000 0
2.4375 6.0000 1.8750 59400 15400 17300 68700
. 5 . 00 . 5 000 0. 0. 500 00 0. 0 000
2.4375 6.0000 1.8750 59400 15400 17300 68700
. 5 . 50 50. 00 000 0. 0. 500 00 0. 0 000 0 0
2.4375 6.2500 2.0000 59400 15400 17300 68700
. 5 . 50 50. 00 000 0. 0. 500 00 0. 0 000 0
2.4375 6.2500 2.0000 59400 15400 17300 68700
. 5 . 50 55.5 000 0. 0. 500 00 0. 0 000 0
2.4375 6.2500 2.1875 59400 15400 17300 68700
. . . 00 0. . 5500 500 . 000 0
2.4400 3.9362 0.9375 22100 5720 4170 33500
. 00.000 5. 00 00 0. . 5500 500 . 000 5
2.4700 3.9370 1.0000 22100 5720 4170 33500
B
Caption:
Caption:
C
D
B
d
a
B 0 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 50 . 5 - . .5 .0 .0 . .0 0 .0 . 0 .00 . . 0.0 . 0
1.7500 1.3750 -0.37 0.14 2.80 3.23 0.05 4.69 4.25 0.16 0.04
5.73
. 50 . 5 - . .5 .0 .0 . .0 0 .0 . 0 .00 . . 0.0 .5
1.7500 1.3750 -0.37 0.06 2.80 3.07 0.13 4.69 4.21 0.16 0.04
5.72
. . 5. 5.0 .5 .0 . .5 0 .0 . 0 . 0 5 . .5 0.0 .0
1.3125 0.9375 0.21 0.20 2.93 3.43 0.13 4.87 4.29 0.29 0.17
4.55
. 5 . 50 - . .5 .0 .0 . .0 .0 . 0 . 0 0 0.0 .5
1.6250 1.2500 -0.44 0.14 2.83 3.07 0.13 4.88 4.57 0.16 0.08
5.71
5 .00 . 50 - . .5 .0 .0 . .0 .0 .00 0.50 . 0.0 .
2.2050 1.7500 -0.76 0.14 2.91 3.19 0.13 4.96 4.61 0.16 0.02
8.43
. .5 0 . 5.0 .5 .0 . 0.0 5.0 . 0 . 0 . . 0.0 .
1.3085 0.9260 0.33 0.20 3.05 3.58 0.13 5.12 4.53 0.25 0.19
5.37
. 5 . 50 - . .5 .0 .0 . 5.0 .0 . 0 . 0 0 0.0 .
1.6250 1.2500 -0.44 0.14 2.83 3.07 0.13 4.92 4.65 0.16 0.08
6.47
. 50 .5 - . .5 .0 .0 .0 0.0 .0 . 0 .00 . . 0.0 .
1.7500 1.4375 -0.37 0.14 2.80 3.23 0.12 4.72 4.41 0.16 0.04
7.10
.0 .5 - . .5 0.0 .0 . .0 .0 . 0 .00 . 0.0 .5
1.8125 1.4375 -0.34 0.14 3.15 3.39 0.13 5.20 4.65 0.16 0.08
7.77
.0 .5 - . .5 0.0 .0 . .0 0.0 . 0 .00 . 0.0 .
1.8125 1.4375 -0.34 0.14 3.15 3.39 0.13 5.24 4.72 0.16 0.08
8.17
. .5 0 . 5.0 .5 .0 . .0 .0 . 0 . 0 . . 0.0 .5
1.3085 0.9260 0.33 0.20 3.05 3.58 0.09 5.20 4.61 0.25 0.19
5.71
5 . 05 . 5 - 0. .5 .0 .0 . .0 0.0 . 0 . 0 . 0.0 5.0
2.0750 1.6250 -0.43 0.14 3.27 3.50 0.13 5.63 5.12 0.16 0.10
11.06
. . 5 -0. 0. .0 0.0 . 05.0 0 .0 . 0 .00 5 . 0.0 0.
0.8660 0.7411 -0.03 0.03 2.72 2.76 0.05 4.13 3.98 0.07 0.08
1.91
. . -0. 0. .0 0.0 . 0 .0 .0 . 0 .00 5 . 0.0 .05
0.8660 0.9375 -0.03 0.03 2.72 2.76 0.13 4.17 3.90 0.07 0.08
2.31
. 0. - . .5 .0 .0 . .0 0 .0 . 0 . 0 . 0. 0 .0
1.4440 1.1875 -0.37 0.14 2.80 3.03 0.13 4.57 4.29 0.09 0.05
4.46
.5 . - . .5 .0 5.0 . .0 .0 .00 . 0 . . 0. 5 .
1.4375 1.0625 -0.15 0.14 3.07 3.35 0.13 4.76 4.37 0.16 0.05
4.71
. . 5. .5 .0 .0 . .5 0 .0 . 0 . 0 5 . .5 0.0 .0
1.3125 0.9375 0.21 0.14 2.91 3.58 0.13 4.87 4.29 0.29 0.17
4.48
.0 .5 - . .5 .0 .0 . .0 .0 . 0 .00 . 0.0 .
1.8125 1.4375 -0.34 0.14 3.19 3.43 0.13 5.20 4.65 0.16 0.08
7.65
.0 .5 - . .5 .0 .0 . .0 0.0 . 0 .00 . 0.0 . 5
1.8125 1.4375 -0.34 0.14 3.19 3.43 0.13 5.24 4.72 0.16 0.08
8.05
. 5. 00 . .5 .5 0.0 . .0 .0 . 0 . 0 .5 . 0.0 .
1.5625 1.0000 0.17 0.14 3.24 3.54 0.13 5.43 4.88 0.32 0.14
6.87
. 5. 00 . .0 .5 .0 . .0 .0 . 0 . 0 .5 . 0.0 .0
1.5625 1.0000 0.17 0.28 3.24 3.82 0.13 5.43 4.88 0.32 0.14
6.80
.0 . 50 - . .5 .5 0.0 . 5.0 0.0 . 0 .00 . . 0.0 .
1.8125 1.2500 -0.15 0.14 3.20 3.54 0.13 5.71 5.12 0.32 0.16
8.78
.0 . 50 - . 0. .5 5.0 . 5.0 0.0 . 0 .00 . . 0.0 .
1.8125 1.2500 -0.15 0.03 3.20 3.35 0.13 5.71 5.12 0.32 0.16
8.80
.0 . 5 - . .5 .5 0.0 . .0 .0 . 0 .00 . . 0.0 . 0
1.8125 1.3750 -0.15 0.14 3.20 3.54 0.13 5.75 5.16 0.32 0.16
10.14
.0 . 5 - . 0. .5 5.0 . .0 .0 . 0 .00 . . 0.0 .
1.8125 1.3750 -0.15 0.03 3.20 3.35 0.13 5.75 5.16 0.32 0.16
10.17
5 . . 5 - . .5 .5 0.0 . .0 .0 . 0 . 0 . . 0.0 .
2.0625 1.3750 -0.33 0.14 3.20 3.54 0.13 5.75 5.16 0.51 0.10
10.71
. 0 .050 - . .0 .0 .0 .5 .0 0.0 . 0 . 0 0. .5 0. 0 0.
0.9688 0.7500 -0.07 0.08 2.68 2.83 0.06 3.78 3.54 0.05 0.05
1.56
5. 00 . 5 - .5 .5 .0 5.0 . .0 .0 .00 . 0 0. .5 0. 0 0. 0
1.0000 0.7813 -0.10 0.14 2.72 2.95 0.13 3.78 3.50 0.08 0.05
1.55
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 0
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 0 . 00 5. 00 00 0. . 5500 500 . 000
5 0
LL5 0 LL5 0 0
L 05 L 05 0
50
50
5 5 5 0
5 5 5
5 5 0
5 5
5
0A A
0A AS
5 A
5 AS
5 5 5
5 5
X AS
X
50
5 0
0A 0
0
5
5 5 5 0
5 5A 5 0
5
A
2.4700 4.0000 1.0000 22100 5720 4170 33500
.500 .0 5 . 5 5 00 0. . 0 50 . 5 00
B
Caption:
2.5000 3.6250 0.5313 8060 2090 1450 12000
.500 . 5 .050 000 0. . 00 00 . 0 000
2.5000 3.7188 0.7500 13900 3620 2630 24300
.500 0 . 5 . 00 0. .55 00 5 00 .5 0000
2.5000 4.1250 0.8438 20100 5220 3470 27000
.500 0 . 5 .000 00 0. .55 00 5 00 .5 0000
2.5000 4.2188 0.8661 20100 5220 3470 27000
.500 0 . 50 5. 00 0 000 0. . 00 0 00 . 000
Caption:
2.5000 4.2500 1.0000 22900 5950 4670 36300
.500 0 . 50 5. 00 0 000 0. . 00 0 00 . 000
2.5000 4.2500 1.0000 22900 5950 4670 36300
.500 0 . 50 5. 00 0 000 0. . 00 0 00 . 000
2.5000 4.2500 1.0000 22900 5950 4670 36300
.500 0 . 50 5. 00 0 000 0. . 00 0 00 . 000
T
C
2.5000 4.2500 1.0000 22900 5950 4670 36300
.500 0.000 .000 00 0. 0 . 00 00 . 5 5000
2.5000 4.3307 0.8661 20600 5340 3670 28100
.500 0.000 .000 00 0. 0 . 00 00 . 5 5000
D
2.5000 4.3307 0.8661 20600 5340 3670 28100
.500 0.000 .000 00 0. 0 . 00 00 . 5 5000
B
d
2.5000 4.3307 0.8661 20600 5340 3670 28100
.500 0.000 .000 00 0. 0 . 00 00 . 5 5000
2.5000 4.3307 0.8661 20600 5340 3670 28100
.500 0.000 .000 00 0. 0 . 00 00 . 5 5000
a
2.5000 4.3307 0.8661 20600 5340 3670 28100
.500 0.000 5. 00 0 000 0. . 00 0 00 . 000
2.5000 4.3307 1.0000 22900 5950 4670 36300
.500 0.000 5. 00 0 000 0. . 00 0 00 . 000
2.5000 4.3307 1.0000 22900 5950 4670 36300
.500 0.000 . 0 000 0. 0 . 00 00 . 5 000
2.5000 4.3307 1.1563 28900 7490 5160 43000
.500 0.000 0. 000 0. 0 . 00 00 . 5 000
2.5000 4.3307 1.1875 28900 7490 5160 43000
.500 0.05 .000 00 0. .55 00 5 00 .5 0000
2.5000 4.3330 0.8661 20100 5220 3470 27000
.500 . . 00 0. 0 . 00 00 . 5 5000
2.5000 4.4375 1.0617 20600 5340 3670 28100
.500 . . 00 0. 0 . 00 00 . 5 5000
2.5000 4.4375 1.0617 20600 5340 3670 28100
.500 . 0. 000 0. 0 . 00 00 . 5 000
2.5000 4.4375 1.1875 28900 7490 5160 43000
.500 . 0. 000 0. 0 . 00 00 . 5 000
2.5000 4.4375 1.1875 28900 7490 5160 43000
.500 . 0. 55000 0. . 0 00 00 . 000
2.5000 4.4375 1.1875 34700 9010 5230 50300
.500 . 0. 55000 0. . 0 00 00 . 000
2.5000 4.4375 1.1875 34700 9010 5230 50300
.500 . . 000 0. 0 . 00 00 . 5 000
2.5000 4.4375 1.3125 28900 7490 5160 43000
.500 . 5 0. 000 0. . 00 00 . 000
2.5000 4.6250 1.1875 28800 7470 5570 44300
.500 0.000 .00 000 0. .5 00 00 .5 000
2.5000 4.7244 1.1418 29900 7740 5100 41900
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B 0 TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
5. 00 . 5 - .5 .5 .0 5.0 . .0 0.0 .00 . 0 0. .5 0. 0 0.
1.0000 0.7813 -0.10 0.14 2.72 2.95 0.13 3.82 3.54 0.08 0.05
1.64
. 00 .5 5 .0 .5 .0 0.0 .5 .0 .0 0. 0 . 0 . 5. 0.0 0.
0.5000 0.3750 0.12 0.06 2.68 2.76 0.06 3.46 3.39 0.02 0.07
0.58
.050 5.0 0.5 .5 .0 .0 .5 .0 .0 0. 0 . 0 5 . . 0. 00 0. 5
0.7500 0.5938 0.02 0.06 2.72 2.80 0.06 3.58 3.39 0.04 0.06
0.99
.000 5. 5 - .5 .0 .0 .0 .0 00.0 .0 . 0 . 0 5 . .5 0.0 0.
0.8661 0.6250 -0.06 0.08 2.72 2.87 0.08 3.94 3.78 0.07 0.09
1.51
.000 . 0 - .5 .0 .0 .0 . 0 .0 .0 . 0 . 0 5 . .5 0.0 0.
0.8661 0.8348 -0.06 0.08 2.72 2.87 0.09 4.02 3.82 0.07 0.09
1.72
5. 00 .050 -0. .5 .0 .0 . 0 .0 .0 . 0 . 0 0. 5. 0. 0.
1.0000 0.7500 -0.03 0.14 2.80 3.03 0.13 4.06 3.78 0.08 0.05
2.02
5. 00 .050 -0. .5 .0 .0 0. 0 .0 .0 . 0 . 0 0. 5. 0. 0.
1.0000 0.7500 -0.03 0.14 2.80 3.03 0.03 4.06 3.86 0.08 0.05
2.04
5. 00 .050 -0. .5 .0 .0 . 0 .0 .0 . 0 . 0 0. 5. 0. 0.
1.0000 0.7500 -0.03 0.06 2.80 2.87 0.13 4.06 3.78 0.08 0.05
2.03
5. 00 .050 -0. .5 .0 .0 0. 0 .0 .0 . 0 . 0 0. 5. 0. 0.
1.0000 0.7500 -0.03 0.06 2.80 2.87 0.03 4.06 3.86 0.08 0.05
2.06
. .000 -0. .5 0.0 .0 0. 0 .0 0 .0 . 0 .00 5 . 0.0 0. 5
0.8660 0.8661 -0.03 0.14 2.76 3.03 0.03 4.18 3.98 0.07 0.08
1.87
. . 5 -0. .5 0.0 .0 . 05.0 0 .0 . 0 . 0 5 . 0.0 0.
0.8660 0.7411 -0.03 0.06 2.76 2.87 0.05 4.13 3.98 0.07 0.09
1.85
. . 5 -0. .5 0.0 .0 . 0 .5 .0 . 0 . 0 5 . 0.0 0.
0.8660 0.7411 -0.03 0.06 2.76 2.87 0.13 4.11 3.90 0.07 0.09
1.81
. . 5 -0. .5 0.0 .0 . 05.0 0 .0 . 0 .00 5 . 0.0 0.
0.8660 0.7411 -0.03 0.14 2.76 3.03 0.05 4.13 3.98 0.07 0.08
1.83
. . 5 -0. .5 0.0 .0 . 0 .5 .0 . 0 .00 5 . 0.0 0.
0.8660 0.7411 -0.03 0.14 2.76 3.03 0.13 4.11 3.90 0.07 0.08
1.80
5. 00 .050 -0. .5 .0 .0 . 0 .0 .0 . 0 . 0 0. 5. 0. 0.
1.0000 0.7500 -0.03 0.14 2.80 3.03 0.05 4.09 3.90 0.08 0.05
2.16
5. 00 .050 -0. .5 .0 .0 . 0 .0 .0 . 0 . 0 0. 5. 0. 0.
1.0000 0.7500 -0.03 0.06 2.80 2.87 0.05 4.09 3.90 0.08 0.05
2.17
0.0 .0 0 - . .0 .0 .0 0.5 05.0 00.0 . 0 . 0 5. . 0. 0 . 0
1.1830 0.9063 -0.18 0.28 2.80 3.31 0.02 4.13 3.94 0.09 0.04
2.42
0.0 . - . .5 .0 .0 . 05.0 .0 . 0 . 0 5. . 0. 0 .
1.1830 0.9375 -0.18 0.14 2.80 3.03 0.13 4.13 3.90 0.09 0.04
2.50
.000 . - .5 .0 .0 .0 . 0 .0 .0 . 0 . 0 5 . .5 0.0 0.
0.8661 0.6786 -0.06 0.08 2.72 2.87 0.09 4.06 3.86 0.07 0.09
1.80
. . -0. .5 0.0 .0 . 0 .0 .0 . 0 .00 5 . 0.0 .0
0.8660 0.9375 -0.03 0.14 2.76 3.03 0.13 4.17 3.90 0.07 0.08
2.23
. . -0. .5 0.0 .0 . 0 .0 .0 . 0 . 0 5 . 0.0 .0
0.8660 0.9375 -0.03 0.06 2.76 2.87 0.13 4.17 3.90 0.07 0.09
2.24
0.0 . - . .5 .0 .0 . 0 .0 .0 . 0 . 0 5. . 0. 0 .
1.1830 0.9375 -0.18 0.14 2.80 3.03 0.13 4.17 3.90 0.09 0.04
2.70
0.0 . - . .5 .0 .0 0. 0 .0 0 .0 . 0 . 0 5. . 0. 0 .
1.1830 0.9375 -0.18 0.14 2.80 3.03 0.03 4.17 3.98 0.09 0.04
2.73
0. . - . .5 .0 .0 . 0 .0 0 .0 . 0 . 0 . . 0. 0 .
1.1875 0.9375 -0.26 0.14 2.80 3.03 0.13 4.21 3.98 0.06 0.10
2.72
0. . - . 0. .0 .0 . 0 .0 0 .0 . 0 . 0 . . 0. 0 .
1.1875 0.9375 -0.26 0.03 2.80 2.83 0.13 4.21 3.98 0.06 0.10
2.74
0.0 . - . .5 .0 .0 . 0 .0 .0 . 0 . 0 5. . 0. 0 .
1.1830 1.0625 -0.18 0.14 2.80 3.03 0.13 4.17 3.86 0.09 0.04
2.89
0. . - . 0. .0 .0 . .0 0 .0 . 0 . 0 . 5. 0. .
1.1875 0.9375 -0.11 0.03 2.83 2.87 0.13 4.41 4.09 0.09 0.04
3.13
.00 . - . 0. .0 .0 . .0 0 .0 .50 . 0 . 0. 0 .
1.1420 0.9230 -0.16 0.03 2.83 2.87 0.13 4.49 4.17 0.06 0.08
3.17
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
.500 0.000 .00 000 0. .5 00 00 .5 000 A
2.5000 4.7244 1.1418 29900 7740 5100 41900
.500 0.000 . 000 0. .5 00 00 .5 000
2.5000 4.7244 1.1730 29900 7740 5100 41900
.500 0.000 . 000 0. .5 00 00 .5 000
2.5000 4.7244 1.1730 29900 7740 5100 41900
.500 0.000 . 000 0. .5 00 00 .5 000
2.5000 4.7244 1.1730 29900 7740 5100 41900
.500 . . 00 0 000 0. . 5 00 00 . 000 HM 0 HM 0 0
2.5000 4.8125 1.5000 46900 12200 7030 62700
.500 . . 00 0 000 0. . 5 00 00 . 000 HM 0 HM 0
2.5000 4.8125 1.5000 46900 12200 7030 62700
.500 . . 00 0 000 0. . 5 00 00 . 000 HM 0 HM 0 0
2.5000 4.8125 1.5000 46900 12200 7030 62700
.500 . . 00 0 000 0. . 5 00 00 . 000 HM 0 HM 0
2.5000 4.8125 1.5000 46900 12200 7030 62700
.500 . . 5 000 0. . 5 00 00 . 000 55 55 5
2.5000 4.8125 1.7188 49200 12800 7830 73500
.500 . . 5 000 0. . 5 00 00 . 000 55 55 5
2.5000 4.8125 1.7188 49200 12800 7830 73500
.500 . 5 0. 000 0. .5 00 00 .5 000 X
2.5000 4.8750 1.1875 29900 7740 5100 41900
.500 . 5 . 00 000 0. 5 . 5 00 00 . 000 55 55
2.5000 4.8750 1.5000 39700 10300 6100 55700
.500 . 5 . 00 000 0. 5 . 5 00 00 . 000 55 55 A
2.5000 4.8750 1.5000 39700 10300 6100 55700
.500 .000 .5 000 0. . 5 00 00 . 000 5 5 5
2.5000 5.0000 1.4375 40900 10600 6600 58900
.500 .000 .5 000 0.50 . 0 00 00 . 5 000 HM A HM 0
2.5000 5.0000 1.4375 40300 10400 8970 57600
.500 .000 .5 000 0.50 . 0 00 00 . 5 000 HM HM 0
2.5000 5.0000 1.4375 40300 10400 8970 57600
.500 .000 .5 000 0.50 . 0 00 00 . 5 000 HM HM
2.5000 5.0000 1.4375 40300 10400 8970 57600
.500 0.000 . 000 0. . 5 00 00 . 000 5 5 5 X
2.5000 5.1181 1.4542 40900 10600 6600 58900
.500 0.000 . 000 0. . 5 00 00 . 000 5 5-S 5 X
2.5000 5.1181 1.4542 40900 10600 6600 58900
.500 0.000 . 5 000 0. . 55 00 00 . 000 X
2.5000 5.1181 1.6250 48500 12600 7790 67000
.500 0. 5 . 5 000 0. . 55 00 00 . 000
2.5000 5.1250 1.6250 48500 12600 7790 67000
.500 5. 55 5 . 5 000 0. . 5 00 00 . 0 0 000 0
2.5000 5.3447 2.1250 66900 17300 9640 90900
.500 .5 5 .5 5 000 0. 0. 00 0 00 0. 000 50 5
2.5000 5.3750 1.4375 35600 9230 13700 43400
.500 .5 5 .5 5000 0. 0. 00 000 0. 000 C 5
2.5000 5.3750 1.4375 41500 10800 16000 52600
.500 .5 5 . 5 000 0. . 55 00 00 . 000
2.5000 5.3750 1.6250 48500 12600 7790 67000
.500 .5 5 . 5 5 000 0. . 5 00 0 00 . 5000 H 5 H 0
2.5000 5.3750 1.6250 56700 14700 9060 75400
.500 .5 5 . 5 5 000 0. . 5 00 0 00 . 5000 H H 0
2.5000 5.3750 1.6250 56700 14700 9060 75400
.500 .5 5 .0 000 0. . 00 5 00 . 05000 H 5 H 5
2.5000 5.3750 1.8125 56000 14500 11800 91000
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.00 . - . .5 .0 .0 . .0 0 .0 .50 . 0 . 0. 0 .
1.1420 0.9230 -0.16 0.14 2.83 3.07 0.13 4.49 4.17 0.06 0.08
3.15
.00 . - . 0. .0 .0 .0 .0 0 .0 .50 . 0 . 0. 0 .
1.1420 0.9542 -0.16 0.03 2.83 2.87 0.08 4.49 4.21 0.06 0.08
3.24
.00 .000 - . 0. .0 .0 .0 .0 0 .0 .50 . 0 . 0. 0 .5
1.1420 1.1417 -0.16 0.03 2.83 2.87 0.08 4.49 4.21 0.06 0.08
3.35
.00 . - . .5 .0 .0 .0 .0 0 .0 .50 . 0 . 0. 0 .
1.1420 0.9542 -0.16 0.14 2.83 3.07 0.08 4.49 4.21 0.06 0.08
3.22
. 5 . - 0. .5 .0 0.0 .5 .0 0.0 . 0 .00 . . 0.0 5 . 5
1.5100 1.1700 -0.43 0.14 2.87 3.15 0.06 4.57 4.33 0.09 0.12
4.29
. 5 . - 0. .5 .0 0.0 . .0 0 .0 . 0 .00 . . 0.0 5 .
1.5100 1.1700 -0.43 0.14 2.87 3.15 0.13 4.57 4.25 0.09 0.12
4.29
. 5 . - 0. .0 .0 .0 .5 .0 0.0 . 0 .00 . . 0.0 5 .
1.5100 1.1700 -0.43 0.28 2.87 3.43 0.06 4.57 4.33 0.09 0.12
4.26
. 5 . - 0. .0 .0 .0 . .0 0 .0 . 0 .00 . . 0.0 5 .
1.5100 1.1700 -0.43 0.28 2.87 3.43 0.13 4.57 4.25 0.09 0.12
4.26
. .5 - . 5.0 5.0 .0 . .0 0 .0 .50 . 0 0 . 0.0 5 .
1.7230 1.4375 -0.48 0.20 2.95 3.31 0.13 4.57 4.17 0.10 0.05
5.02
. .5 - . .5 5.0 .0 . .0 0 .0 .50 . 0 0 . 0.0 5 .
1.7230 1.4375 -0.48 0.14 2.95 3.19 0.13 4.57 4.17 0.10 0.05
5.04
.00 . 05 - . .5 .0 .0 . 5.0 0 .0 .50 . 0 . 0. 0 . 0
1.1420 0.9687 -0.16 0.14 2.83 3.07 0.13 4.53 4.29 0.06 0.08
3.52
. . - . .5 .0 .0 . .0 0 .0 . 0 . 0 . 0. 0 .0
1.4440 1.3125 -0.37 0.14 2.83 3.07 0.13 4.57 4.29 0.09 0.05
4.46
. 0. - . .5 .0 .0 . .0 0 .0 . 0 . 0 . 0. 0 .
1.4440 1.1875 -0.37 0.14 2.83 3.07 0.13 4.57 4.29 0.09 0.05
4.36
. 0 .5 5 - . .5 .0 0.0 . 0.0 .0 . 0 . 0 0 0. .0
1.4240 1.1250 -0.32 0.14 2.87 3.15 0.13 4.72 4.41 0.13 0.07
4.59
.5 . - . 0. .0 .0 . .0 .0 .00 . 0 . . 0. 5 .0
1.4375 1.0625 -0.15 0.03 3.07 3.07 0.13 4.76 4.37 0.16 0.05
4.62
.5 . - . .5 .0 .0 . .0 .0 .00 . 0 . . 0. 5 .0
1.4375 1.0625 -0.15 0.14 3.07 3.31 0.13 4.76 4.37 0.16 0.05
4.61
.5 . - . .5 .0 .0 .5 .0 .0 .00 . 0 . . 0. 5 .0
1.4375 1.0625 -0.15 0.14 3.07 3.31 0.06 4.76 4.45 0.16 0.05
4.61
. 0 .000 - . .5 .0 0.0 .0 .0 .0 . 0 . 0 0 0. .
1.4240 1.1417 -0.32 0.14 2.87 3.15 0.12 4.76 4.49 0.13 0.07
4.93
. 0 .000 - . . .0 5.0 .0 .0 .0 . 0 . 0 0 0. .
1.4240 1.1417 -0.32 0.25 2.87 3.35 0.12 4.76 4.49 0.13 0.07
4.88
. 5 . 50 - . .5 .0 .0 .0 .0 .0 . 0 . 0 0 0.0 .
1.6250 1.2500 -0.44 0.14 2.91 3.19 0.12 4.84 4.61 0.16 0.08
5.48
. 5 . 50 - . .5 .0 .0 . .0 .0 . 0 . 0 0 0.0 .
1.6250 1.2500 -0.44 0.14 2.91 3.19 0.13 4.88 4.57 0.16 0.08
5.49
5 .00 . 50 - . . .0 .0 . .0 .0 .00 0.50 . 0.0 .
2.2050 1.7500 -0.76 0.17 3.03 3.31 0.13 4.96 4.61 0.16 0.02
8.12
. .5 0 . . .5 5.0 . 0.0 5.0 . 0 . 0 . . 0.0 .
1.3085 0.9260 0.31 0.09 3.10 3.35 0.13 5.12 4.53 0.27 0.16
4.99
. .5 0 . 0. .0 .0 . 0.0 5.0 . 0 . 0 . . 0.0 .
1.3085 0.9260 0.33 0.03 3.03 3.62 0.13 5.12 4.53 0.25 0.19
5.24
. 5 . 50 - . .5 .0 .0 . 5.0 .0 . 0 . 0 0 0.0 .
1.6250 1.2500 -0.44 0.14 2.91 3.19 0.13 4.92 4.65 0.16 0.08
6.25
. 5 . 50 - 0. .5 .0 .0 . .0 .0 . 0 .00 . 0.0 .
1.6250 1.2500 -0.43 0.14 3.07 3.23 0.13 5.08 4.76 0.15 0.12
6.25
. 5 . 50 - 0. .0 .0 .0 . .0 .0 . 0 .00 . 0.0 . 0
1.6250 1.2500 -0.43 0.28 3.07 3.50 0.13 5.08 4.76 0.15 0.12
6.18
.0 .5 - . .5 .0 .0 . .0 .0 . 0 .00 . 0.0 .
1.8125 1.4375 -0.34 0.14 3.23 3.46 0.13 5.20 4.65 0.16 0.08
7.52
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
.500 . 00 .0 000 0. . 00 5 00 . 05000 H 5 H 5 0
2.5000 5.5000 1.8125 56000 14500 11800 91000
.500 0.0 0 .5 5 000 0. 0. 00 0 00 0. 000 50 55
2.5000 5.5130 1.4375 35600 9230 13700 43400
.500 . 5 5 . 5 000 0. . 00 5 00 . 000 5 0
2.5000 5.8750 2.1250 72200 18700 11600 104000
.500 50.0 . 50 000 0. . 00 500 . 0 000 5-S
2.5000 5.9090 1.7500 66100 17100 9550 93800
.500 . 00 5 . 5 000 0. 0 0. 5 00 5000 0. 000 HH HH
2.5000 7.0000 2.2300 79200 20500 28000 92900
. 0 . 5 . 5 000 0. . 5 00 500 . 5000 5 5 A
2.5575 5.8750 1.6250 51400 13300 9330 75300
. 0 . 5 5 . 5 000 0. . 00 5 00 . 000 0
2.5575 5.8750 2.1250 72200 18700 11600 104000
. .000 .5 000 0. . 5 00 00 . 000 5 5
2.5576 5.0000 1.4375 40900 10600 6600 58900
. 0 . 50 5. 00 0 000 0. . 00 0 00 . 000 5 5 0
2.5586 4.2500 1.0000 22900 5950 4670 36300
. . 0. 55000 0. . 0 00 00 . 000 5 5 0
2.5586 4.4375 1.1875 34700 9010 5230 50300
. . 5 . 5 55000 0. . 0 00 00 . 000 5 5
2.5586 4.7238 1.2894 34700 9010 5230 50300
. 0.0 0 .5 5 000 0. 0. 00 0 00 0. 000 55X 55
2.5586 5.5130 1.4375 35600 9230 13700 43400
. . .000 5 000 0. 0. 00 0 00 0. 000 55X 5
2.5586 5.7080 1.4173 35600 9230 13700 43400
5.000 05.000 .000 00000 0. 5 . 000 0 00 . 000 JLM 0 C JLM 0 0
2.5591 4.1339 0.9449 22500 5840 4540 31300
5.000 0.000 .000 000 0. 0 . 00 00 . 5 5000 JM5 JM5 0
2.5591 4.3307 1.1024 29400 7610 5240 43900
5.000 . . 5 00 0. 0 . 00 00 . 5 5000 A
2.5591 4.4375 0.8750 20600 5340 3670 28100
5.000 . .0 0 000 0. 0 . 00 00 . 5 5000 JM5 5 0
2.5591 4.4375 1.1425 29400 7610 5240 43900
5.000 . .0 0 000 0. 0 . 00 00 . 5 5000 JM5 0
2.5591 4.4375 1.1425 29400 7610 5240 43900
5.000 0.000 .00 000 0. .5 00 00 .5 000 A
2.5591 4.7244 1.1418 29900 7740 5100 41900
5.000 0.000 . 000 0. .5 00 00 .5 000
2.5591 4.7244 1.1730 29900 7740 5100 41900
5.000 0.000 . 000 0. .5 00 00 .5 000
2.5591 4.7244 1.1730 29900 7740 5100 41900
5.000 0.000 .000 0 000 0. . 5 500 0 00 . 000 JH A JH 0
2.5591 4.7244 1.5354 46400 12000 6950 63600
5.000 0.000 .000 0 000 0. . 5 500 0 00 . 000 JH JH 0
2.5591 4.7244 1.5354 46400 12000 6950 63600
5.000 . 5 0. 000 0. .5 00 00 .5 000 X
2.5591 4.8750 1.1875 29900 7740 5100 41900
5.000 0.000 5 . 0 000 0. . 5 00 00 . 0 0 000 J J
2.5591 5.5118 2.1250 66900 17300 9640 90900
5.0 5. 55 5 . 5 000 0. . 5 00 00 . 0 0 000 0
2.5625 5.3447 2.1250 66900 17300 9640 90900
5.0 .5 5 .0 000 0. . 00 5 00 . 05000 H 5 0 H 5
2.5625 5.3750 1.8125 56000 14500 11800 91000
5.0 . 00 .0 000 0. . 00 5 00 . 05000 H 5 0 H 5 0
2.5625 5.5000 1.8125 56000 14500 11800 91000
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.0 .5 - . .5 .0 .0 . .0 0.0 . 0 .00 . 0.0 .5
1.8125 1.4375 -0.34 0.14 3.23 3.46 0.13 5.24 4.72 0.16 0.08
7.93
. .5 0 . . .5 5.0 . .0 .0 . 0 . 0 . . 0.0 .
1.3085 0.9260 0.31 0.09 3.10 3.35 0.09 5.20 4.61 0.27 0.16
5.32
5 . . 50 - 5.0 .5 0.0 .0 . 0.0 .0 . 0 0. 0 5 . 0.0 .
2.1350 1.7500 -0.59 0.14 3.15 3.39 0.13 5.51 5.08 0.11 0.03
10.63
. .5 - . .5 .0 .0 . .0 .0 . 0 . 0 0 . 0.0 .
1.8375 1.4375 -0.47 0.14 3.03 3.31 0.13 5.59 5.28 0.07 0.05
9.16
5 . 5 . 0 -0. .5 5.5 05.0 . 5.0 .0 . 0 . 0 . 0. 0 .
2.1250 1.4688 -0.01 0.14 3.36 4.13 0.13 6.50 5.75 0.39 0.18
14.97
. 5 . 50 - . .5 .0 5.0 . .0 .0 .50 .00 . 0.0 .5
1.6250 1.2500 -0.31 0.14 3.07 3.35 0.13 5.55 5.20 0.18 0.08
7.88
5 . . 50 - 5.0 .5 .0 .0 . 0.0 .0 . 0 0. 0 5 . 0.0 .
2.1350 1.7500 -0.59 0.14 3.19 3.43 0.13 5.51 5.08 0.11 0.03
10.49
. 0 .5 5 - . .5 .0 .0 . 0.0 .0 . 0 . 0 0 0. .0
1.4240 1.1250 -0.32 0.14 2.91 3.19 0.13 4.72 4.41 0.13 0.07
4.50
5. 00 .050 -0. .5 .0 .0 . 0 .0 .0 . 0 . 0 0. 5. 0. 0.
1.0000 0.7500 -0.03 0.14 2.83 3.07 0.13 4.06 3.78 0.08 0.05
1.95
0. 5 . - . . .0 .0 . 0 .0 0 .0 . 0 . 0 . . 0. 0 .
1.2175 0.9375 -0.26 0.09 2.83 2.99 0.13 4.21 3.98 0.06 0.07
2.67
0. 5 . 50 - . . .0 .0 0. 0.0 0 .0 . 0 . 0 . . 0. 0 .5
1.2175 1.0610 -0.26 0.09 2.83 2.99 0.03 4.33 4.21 0.06 0.07
3.43
. .5 0 . .5 .0 .0 . .0 .0 . 0 . 0 . . 0.0 .
1.2962 0.9260 0.31 0.14 3.11 3.50 0.09 5.20 4.61 0.27 0.18
5.22
. .00 . .5 .0 .0 .5 .0 .0 . 0 . 0 . . 0.0 .5
1.2962 0.9058 0.31 0.14 3.11 3.50 0.14 5.20 4.65 0.27 0.18
5.56
.000 .500 -0. .0 .0 .0 .0 00.5 .0 .50 . 0 55.5 . 0. 0 0. 5
0.9055 0.7283 -0.01 0.12 2.83 3.07 0.04 3.96 3.78 0.06 0.12
1.65
.000 .500 - . .0 .0 .0 .5 05.0 .0 . 0 . 0 . .5 0. 0 .05
1.1024 0.8858 -0.13 0.12 2.83 3.07 0.10 4.13 3.90 0.05 0.08
2.32
. 5. 5 -0. .0 .0 5.0 . 05.0 00.0 . 0 . 0 5 . 0.0 0.
0.8660 0.6250 -0.03 0.08 2.80 2.95 0.13 4.13 3.94 0.07 0.09
1.85
0.000 . - . .0 .0 0.0 . 0 .0 .0 . 0 0. 0 . .5 0. 0 .
1.1811 0.9375 -0.13 0.12 2.91 3.15 0.13 4.17 3.90 0.05 0.00
2.61
.000 . - . .0 .0 .0 . 0 .0 .0 . 0 . 0 . .5 0. 0 .
1.1024 0.9375 -0.13 0.12 2.83 3.07 0.13 4.17 3.90 0.05 0.08
2.56
.00 . - . . .0 .0 . .0 0 .0 .50 . 0 . 0. 0 . 0
1.1420 0.9230 -0.16 0.09 2.87 3.03 0.13 4.49 4.17 0.06 0.08
3.08
.00 . - . . .0 .0 .0 .0 0 .0 .50 . 0 . 0. 0 .
1.1420 0.9542 -0.16 0.09 2.87 3.03 0.08 4.49 4.21 0.06 0.08
3.15
.00 .000 - . . .0 .0 .0 .0 0 .0 .50 . 0 . 0. 0 .
1.1420 1.1417 -0.16 0.09 2.87 3.03 0.08 4.49 4.21 0.06 0.08
3.27
.500 .000 - 0. .0 .0 .0 .5 .0 0 .0 . 0 . 0 .5 0.0 .
1.5157 1.2598 -0.42 0.28 2.91 3.46 0.10 4.49 4.21 0.05 0.13
4.04
.500 .000 - 0. .0 .0 0.0 .5 .0 0 .0 . 0 . 0 .5 0.0 .
1.5157 1.2598 -0.42 0.12 2.91 3.15 0.10 4.49 4.21 0.05 0.13
4.12
.00 . 05 - . . .0 .0 . 5.0 0 .0 .50 . 0 . 0. 0 .5
1.1420 0.9687 -0.16 0.09 2.87 3.03 0.13 4.53 4.29 0.06 0.08
3.46
5 .000 . 50 - . .0 .0 .0 . .0 .0 .00 0.50 . 0.0 .
2.2050 1.7500 -0.76 0.12 3.04 3.27 0.13 5.35 4.69 0.16 0.02
8.70
5 .00 . 50 - . .5 .0 .0 . .0 .0 .00 0.50 . 0.0 .
2.2050 1.7500 -0.76 0.14 3.04 3.31 0.13 4.96 4.61 0.16 0.02
7.98
.0 .5 - . .5 .0 .0 . .0 .0 . 0 .00 . 0.0 .
1.8125 1.4375 -0.34 0.14 3.27 3.50 0.13 5.20 4.65 0.16 0.08
7.40
.0 .5 - . .5 .0 .0 . .0 0.0 . 0 .00 . 0.0 .5
1.8125 1.4375 -0.34 0.14 3.27 3.50 0.13 5.24 4.72 0.16 0.08
7.80
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
5. . . 55 000 0. . 5 00 00 . 000
55 5 55 5
L L
L L
5 0 5 0
5 0 5
5A
5A A
5-S
5-S A
5-S AS
5 0 5
X
X
5A A
5A 0
5-S 0
0
0
5
0
5
5 5 0
5 0 5 0
5 0 5
5 5 0
2.5938 4.8125 1.7187 49200 12800 7830 73500
. 5 0 . . 00 0. . 00 000 . 0 00
B
Caption:
2.6250 4.0635 0.6790 14600 3780 3150 20000
. 5 0 . . 0 00 0. . 00 000 . 0 00
2.6250 4.0635 0.6930 14600 3780 3150 20000
. 5 0 . 50 5. 00 0 000 0. . 00 0 00 . 000
2.6250 4.2500 1.0000 22900 5950 4670 36300
. 5 0 . 50 5. 00 0 000 0. . 00 0 00 . 000
2.6250 4.2500 1.0000 22900 5950 4670 36300
. 5 0.000 .000 00 0. 0 . 00 00 . 5 5000
Caption:
2.6250 4.3307 0.8661 20600 5340 3670 28100
. 5 0.000 .000 00 0. 0 . 00 00 . 5 5000
2.6250 4.3307 0.8661 20600 5340 3670 28100
. 5 0.000 .000 00 0. 0 . 00 00 . 5 5000
2.6250 4.3307 0.8661 20600 5340 3670 28100
. 5 0.000 .000 00 0. 0 . 00 00 . 5 5000
T
C
2.6250 4.3307 0.8661 20600 5340 3670 28100
. 5 0.000 .000 00 0. 0 . 00 00 . 5 5000
2.6250 4.3307 0.8661 20600 5340 3670 28100
. 5 0.000 5. 00 0 000 0. . 00 0 00 . 000
D
2.6250 4.3307 1.0000 22900 5950 4670 36300
. 5 0.000 0. 000 0. 0 . 00 00 . 5 000
B
d
2.6250 4.3307 1.1875 28900 7490 5160 43000
. 5 0.000 0. 000 0. 0 . 00 00 . 5 000
2.6250 4.3307 1.1875 28900 7490 5160 43000
. 5 . . 5 00 0. 0 . 00 00 . 5 5000
a
2.6250 4.4375 0.8750 20600 5340 3670 28100
. 5 . . 00 0. 0 . 00 00 . 5 5000
2.6250 4.4375 1.0617 20600 5340 3670 28100
. 5 . . 00 0. 0 . 00 00 . 5 5000
2.6250 4.4375 1.0617 20600 5340 3670 28100
. 5 . . 000 0. 0 . 00 00 . 5 000
2.6250 4.4375 1.1550 28900 7490 5160 43000
. 5 . 0. 000 0. 0 . 00 00 . 5 000
2.6250 4.4375 1.1875 28900 7490 5160 43000
. 5 . 0. 000 0. 0 . 00 00 . 5 000
2.6250 4.4375 1.1875 28900 7490 5160 43000
. 5 . 0. 000 0. 0 . 00 00 . 5 000
2.6250 4.4375 1.1875 28900 7490 5160 43000
. 5 . 0. 000 0. 0 . 00 00 . 5 000
2.6250 4.4375 1.1875 28900 7490 5160 43000
. 5 . 0. 55000 0. . 0 00 00 . 000
2.6250 4.4375 1.1875 34700 9010 5230 50300
. 5 . 0. 55000 0. . 0 00 00 . 000
2.6250 4.4375 1.1875 34700 9010 5230 50300
. 5 . 0. 55000 0. . 0 00 00 . 000
2.6250 4.4375 1.1875 34700 9010 5230 50300
. 5 . 0. 55000 0. . 0 00 00 . 000
2.6250 4.4375 1.1875 34700 9010 5230 50300
. 5 . . 000 0. 0 . 00 00 . 5 000
2.6250 4.4375 1.3125 28900 7490 5160 43000
. 5 . . 000 0. 0 . 00 00 . 5 000
2.6250 4.4375 1.3125 28900 7490 5160 43000
. 5 . 5 0. 000 0. . 00 00 . 000
2.6250 4.6250 1.1875 28800 7470 5570 44300
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. .5 - . .5 .0 .0 . .0 0 .0 .50 . 0 0 . 0.0 5 . 0
1.7230 1.4375 -0.48 0.14 3.03 3.27 0.13 4.57 4.17 0.10 0.05
4.86
. . . .5 .0 5.0 0. .0 .0 . 0 . 0 .5 . 0.0 5 0.50
0.6790 0.4720 0.16 0.06 2.83 2.95 0.03 3.90 3.78 0.05 0.06
1.10
. 0 . . .5 .0 5.0 0. .0 .0 . 0 . 0 .5 . 0.0 5 0.5
0.6930 0.4720 0.14 0.06 2.83 2.95 0.03 3.90 3.78 0.06 0.06
1.11
5. 00 .050 -0. .5 .0 0.0 . 0 .0 .0 . 0 . 0 0. 5. 0. 0. 5
1.0000 0.7500 -0.03 0.14 2.87 3.15 0.13 4.06 3.78 0.08 0.05
1.87
5. 00 .050 -0. .5 .0 0.0 0. 0 .0 .0 . 0 . 0 0. 5. 0. 0.
1.0000 0.7500 -0.03 0.14 2.87 3.15 0.03 4.06 3.86 0.08 0.05
1.90
. .000 -0. 0. .0 .0 0. 0 .0 0 .0 . 0 .00 5 . 0.0 0.
0.8660 0.8661 -0.03 0.03 2.87 2.87 0.03 4.18 3.98 0.07 0.08
1.77
. . 5 -0. 0. .0 .0 . 05.0 0 .0 . 0 .00 5 . 0.0 0.
0.8660 0.7411 -0.03 0.03 2.87 2.87 0.05 4.13 3.98 0.07 0.08
1.73
. .000 -0. .5 .0 .0 0. 0 .0 0 .0 . 0 . 0 5 . 0.0 0. 0
0.8660 0.8661 -0.03 0.14 2.87 3.11 0.03 4.18 3.98 0.07 0.09
1.77
. . 5 -0. .5 .0 .0 . 05.0 0 .0 . 0 . 0 5 . 0.0 0.
0.8660 0.7411 -0.03 0.14 2.87 3.11 0.05 4.13 3.98 0.07 0.09
1.72
. . 5 -0. .5 .0 .0 . 0 .5 .0 . 0 . 0 5 . 0.0 0.
0.8660 0.7411 -0.03 0.14 2.87 3.11 0.13 4.11 3.90 0.07 0.09
1.69
5. 00 .050 -0. .5 .0 0.0 . 0 .0 .0 . 0 . 0 0. 5. 0. 0.
1.0000 0.7500 -0.03 0.14 2.87 3.15 0.05 4.09 3.90 0.08 0.05
2.01
0.0 . - . .5 .0 0.0 . 05.0 .0 . 0 0. 0 5. . 0. 0 .0
1.1830 0.9375 -0.18 0.14 2.91 3.15 0.13 4.13 3.90 0.09 0.04
2.33
0.0 . - . 5.5 .0 .0 . 05.0 .0 . 0 . 0 5. . 0. 0 .0
1.1830 0.9375 -0.18 0.22 2.91 3.31 0.13 4.13 3.90 0.09 0.04
2.33
. 5. 5 -0. 0. .0 .0 . 05.0 00.0 . 0 .00 5 . 0.0 0.
0.8660 0.6250 -0.03 0.03 2.87 2.87 0.13 4.13 3.94 0.07 0.08
1.79
. . -0. 0. .0 .0 . 0 .0 .0 . 0 .00 5 . 0.0 0.
0.8660 0.9375 -0.03 0.03 2.87 2.87 0.13 4.17 3.90 0.07 0.08
2.13
. . -0. .5 .0 .0 . 0 .0 .0 . 0 . 0 5 . 0.0 0.
0.8660 0.9375 -0.03 0.14 2.87 3.11 0.13 4.17 3.90 0.07 0.09
2.12
. . - . 5.5 5.0 .0 . 0 .0 .0 . 0 . 0 5. . 0. 0 .
1.1505 0.9375 -0.15 0.22 2.95 3.39 0.13 4.17 3.90 0.05 0.04
2.50
0.0 . - . .5 .0 0.0 . 0 .0 .0 . 0 0. 0 5. . 0. 0 . 5
1.1830 0.9375 -0.18 0.14 2.91 3.15 0.13 4.17 3.90 0.09 0.04
2.53
0.0 . - . .5 .0 0.0 0. 0 .0 0 .0 . 0 0. 0 5. . 0. 0 .
1.1830 0.9375 -0.18 0.14 2.91 3.15 0.03 4.17 3.98 0.09 0.04
2.56
0.0 . - . 5.5 .0 .0 . 0 .0 .0 . 0 . 0 5. . 0. 0 . 5
1.1830 0.9375 -0.18 0.22 2.91 3.31 0.13 4.17 3.90 0.09 0.04
2.53
0.0 . - . 5.5 .0 .0 0. 0 .0 0 .0 . 0 . 0 5. . 0. 0 .
1.1830 0.9375 -0.18 0.22 2.91 3.31 0.03 4.17 3.98 0.09 0.04
2.56
0. . - . .5 5.0 .0 . 0 .0 0 .0 . 0 . 0 . . 0. 0 .
1.1875 0.9375 -0.26 0.06 2.95 3.07 0.13 4.21 3.98 0.06 0.10
2.57
0. . - . .5 5.0 .0 . 0 .0 0 .0 . 0 . 0 . . 0. 0 .
1.1875 0.9375 -0.26 0.14 2.95 3.23 0.13 4.21 3.98 0.06 0.10
2.57
0. . - . .5 5.0 .0 0. 0 .0 0 .0 . 0 . 0 . . 0. 0 .
1.1875 0.9375 -0.26 0.14 2.95 3.23 0.03 4.21 4.06 0.06 0.10
2.57
0. . - . 5.5 .0 .0 . 0 .0 0 .0 . 0 . 0 . . 0. 0 .
1.1875 0.9375 -0.26 0.22 2.91 3.31 0.13 4.21 3.98 0.06 0.10
2.51
0.0 . - . .5 .0 0.0 . 0 .0 .0 . 0 0. 0 5. . 0. 0 .
1.1830 1.0625 -0.18 0.14 2.91 3.15 0.13 4.17 3.86 0.09 0.04
2.72
0.0 . - . 5.5 .0 .0 . 0 .0 .0 . 0 . 0 5. . 0. 0 .
1.1830 1.0625 -0.18 0.22 2.91 3.31 0.13 4.17 3.86 0.09 0.04
2.72
0. . - . 5.5 5.0 5.0 . .0 0 .0 . 0 . 0 . 5. 0. .
1.1875 0.9375 -0.11 0.22 2.95 3.35 0.13 4.41 4.09 0.09 0.04
2.90
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 5 . 5 0. 000 0. . 00 00 . 000
2.6250 4.6250 1.1875 28800 7470 5570 44300
. 5 . 5 0. 000 0. . 00 00 . 000
2.6250 4.6250 1.1875 28800 7470 5570 44300
. 5 0.000 .00 000 0. .5 00 00 .5 000 A
2.6250 4.7244 1.1418 29900 7740 5100 41900
. 5 0.000 . 000 0. .5 00 00 .5 000
2.6250 4.7244 1.1730 29900 7740 5100 41900
. 5 0.000 . 000 0. . 00 00 . 000
2.6250 4.7244 1.1730 28800 7470 5570 44300
. 5 . . 00 0 000 0. . 5 00 00 . 000 HM 0 HM 0 0
2.6250 4.8125 1.5000 46900 12200 7030 62700
. 5 . . 00 0 000 0. . 5 00 00 . 000 HM 0 HM 0
2.6250 4.8125 1.5000 46900 12200 7030 62700
. 5 . . 00 0 000 0. . 5 00 00 . 000 HM 0 X HM 0 0
2.6250 4.8125 1.5000 46900 12200 7030 62700
. 5 . 5 0. 000 0. .5 00 00 .5 000 X
2.6250 4.8750 1.1875 29900 7740 5100 41900
. 5 . 5 . 00 000 0. 5 . 5 00 00 . 000 5 0 55
2.6250 4.8750 1.5000 39700 10300 6100 55700
. 5 . 5 . 00 000 0. 5 . 5 00 00 . 000 5 0 55 A
2.6250 4.8750 1.5000 39700 10300 6100 55700
. 5 .000 .5 000 0.50 . 0 00 00 . 5 000 HM HM 0
2.6250 5.0000 1.4375 40300 10400 8970 57600
. 5 .000 .5 000 0.50 . 0 00 00 . 5 000 HM HM
2.6250 5.0000 1.4375 40300 10400 8970 57600
. 5 . . 00 000 0. 5 . 5 00 00 . 000 5 0 55 -SA
2.6250 5.1159 1.5000 39700 10300 6100 55700
. 5 0. 5 . 5 000 0. . 55 00 00 . 000
2.6250 5.1250 1.6250 48500 12600 7790 67000
. 5 5. 55 5 . 5 000 0. . 5 00 00 . 0 0 000 0
2.6250 5.3447 2.1250 66900 17300 9640 90900
. 5 5. 55 5 . 5 000 0. . 5 00 00 . 0 0 000 0
2.6250 5.3447 2.1250 66900 17300 9640 90900
. 5 5. 55 5 . 5 000 0. . 5 00 00 . 0 0 000 A 0
2.6250 5.3447 2.1250 66900 17300 9640 90900
. 5 .5 5 0. 000 0. . 5 00 00 . 000 5AA
2.6250 5.3750 1.1875 32100 8330 6340 48600
. 5 .5 5 . 5 000 0. . 55 00 00 . 000
2.6250 5.3750 1.6250 48500 12600 7790 67000
. 5 .5 5 . 5 5 000 0. . 5 00 0 00 . 5000 H H 0
2.6250 5.3750 1.6250 56700 14700 9060 75400
. 5 .5 5 .0 000 0. . 00 5 00 . 05000 H 5 A H 5
2.6250 5.3750 1.8125 56000 14500 11800 91000
. 5 .5 5 .0 000 0. . 00 5 00 . 05000 H 5 H 5
2.6250 5.3750 1.8125 56000 14500 11800 91000
. 5 .5 5 .0 000 0. . 00 5 00 . 05000 H 5 H 5 A
2.6250 5.3750 1.8125 56000 14500 11800 91000
. 5 . 00 .0 000 0. . 00 5 00 . 05000 H 5 H 5 0
2.6250 5.5000 1.8125 56000 14500 11800 91000
. 5 5 . 00 5 . 5 000 0. . 00 00 . 0 000 HH 5 HH 5 0
2.6250 6.0000 2.1250 70500 18300 15200 95000
. 5 . 00 5 . 50 5 000 0. 0 0. 5 00 5000 0. 000 HH HH
2.6250 7.0000 2.2500 79200 20500 28000 92900
. 0.000 .000 00 0. 0 . 00 00 . 5 5000 A A
2.6875 4.3307 0.8661 20600 5340 3670 28100
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
0. . - . .5 5.0 .0 0. .0 0 .0 . 0 . 0 . 5. 0. . 5
1.1875 0.9375 -0.11 0.14 2.95 3.19 0.03 4.41 4.17 0.09 0.04
2.97
0. . - . .5 5.0 .0 . .0 0 .0 . 0 . 0 . 5. 0. .
1.1875 0.9375 -0.11 0.14 2.95 3.19 0.13 4.41 4.09 0.09 0.04
2.94
.00 . - . . .0 .0 . .0 0 .0 .50 . 0 . 0. 0 .
1.1420 0.9230 -0.16 0.09 2.91 3.07 0.13 4.49 4.17 0.06 0.08
3.00
.00 . - . . .0 .0 .0 .0 0 .0 .50 . 0 . 0. 0 .
1.1420 0.9542 -0.16 0.09 2.91 3.07 0.08 4.49 4.21 0.06 0.08
3.07
0. . - . .5 5.0 .0 0. .0 0 .0 . 0 . 0 . 5. 0. .
1.1875 0.9230 -0.11 0.14 2.95 3.19 0.03 4.45 4.21 0.09 0.04
3.14
. 5 . - 0. .5 5.5 .0 .5 .0 0.0 . 0 .00 . . 0.0 5 . 5
1.5100 1.1700 -0.43 0.14 2.97 3.23 0.06 4.57 4.33 0.09 0.12
4.07
. 5 . - 0. .5 5.5 .0 . .0 0 .0 . 0 .00 . . 0.0 5 . 5
1.5100 1.1700 -0.43 0.14 2.97 3.23 0.13 4.57 4.25 0.09 0.12
4.07
. 5 . - 0. .0 5.5 .0 .5 .0 0.0 . 0 .00 . . 0.0 5 .
1.5100 1.1700 -0.43 0.28 2.97 3.50 0.06 4.57 4.33 0.09 0.12
4.04
.00 . 05 - . . .0 .0 . 5.0 0 .0 .50 . 0 . 0. 0 .5
1.1420 0.9687 -0.16 0.09 2.91 3.07 0.13 4.53 4.29 0.06 0.08
3.37
. . - . .5 5.0 .0 . .0 0 .0 . 0 . 0 . 0. 0 .
1.4440 1.3125 -0.37 0.14 2.95 3.19 0.13 4.57 4.29 0.09 0.05
4.25
. 0. - . .5 5.0 .0 . .0 0 .0 . 0 . 0 . 0. 0 .
1.4440 1.1875 -0.37 0.14 2.95 3.19 0.13 4.57 4.29 0.09 0.05
4.15
.5 . - . .5 .0 .0 . .0 .0 .00 . 0 . . 0. 5 .00
1.4375 1.0625 -0.15 0.14 3.23 3.46 0.13 4.76 4.37 0.16 0.05
4.40
.5 . - . .5 .0 .0 .5 .0 .0 .00 . 0 . . 0. 5 .00
1.4375 1.0625 -0.15 0.14 3.23 3.46 0.06 4.76 4.45 0.16 0.05
4.41
. 0. - . .5 5.0 .0 . .0 .0 . 0 . 0 . 0. 0 .
1.4440 1.1875 -0.37 0.14 2.95 3.19 0.13 4.57 4.37 0.09 0.05
4.78
. 5 . 50 - . .5 .0 .0 . .0 .0 . 0 . 0 0 0.0 .
1.6250 1.2500 -0.44 0.14 3.03 3.27 0.13 4.88 4.57 0.16 0.08
5.26
5 .00 . 50 - . . .0 .0 . .0 .0 .00 0.50 . 0.0 .5
2.2050 1.7500 -0.76 0.17 3.04 3.43 0.13 4.96 4.61 0.16 0.02
7.81
5 .00 . 50 - . . .0 .0 . .0 .0 .00 0.50 . 0.0 .5
2.2050 1.7500 -0.76 0.25 3.04 3.58 0.13 4.96 4.61 0.16 0.02
7.77
5 .00 . 50 - . . .0 .0 . .0 .0 .00 0.50 . 0.0 .
2.2050 1.7500 -0.76 0.34 3.04 3.78 0.13 4.96 4.61 0.16 0.02
7.69
. . 5 -0. .5 .0 5.0 . 0.0 .0 .50 . 0 05 . 0. 5 .05
1.1720 0.8750 -0.03 0.14 3.07 3.35 0.13 5.12 4.80 0.10 0.08
4.51
. 5 . 50 - . .5 .0 .0 . 5.0 .0 . 0 . 0 0 0.0 .
1.6250 1.2500 -0.44 0.14 3.03 3.27 0.13 4.92 4.65 0.16 0.08
6.02
. 5 . 50 - 0. .5 .0 5.0 . .0 .0 . 0 .00 . 0.0 .
1.6250 1.2500 -0.43 0.14 3.19 3.35 0.13 5.08 4.76 0.15 0.12
6.02
.0 .5 - . .0 5.0 .0 . .0 .0 . 0 .00 . 0.0 .
1.8125 1.4375 -0.34 0.28 3.35 3.86 0.13 5.20 4.65 0.16 0.08
7.23
.0 .5 - . .5 5.0 .0 . .0 .0 . 0 .00 . 0.0 . 0
1.8125 1.4375 -0.34 0.14 3.35 3.58 0.13 5.20 4.65 0.16 0.08
7.27
.0 .5 - . .5 5.0 .0 0. .0 .0 . 0 .00 . 0.0 . 0
1.8125 1.4375 -0.34 0.14 3.35 3.58 0.03 5.20 4.76 0.16 0.08
7.27
.0 .5 - . .5 5.0 .0 . .0 0.0 . 0 .00 . 0.0 .
1.8125 1.4375 -0.34 0.14 3.35 3.58 0.13 5.24 4.72 0.16 0.08
7.67
5 . 50 . 5 - . .5 5.0 .0 . .0 0.0 5. 0 0. 0 0 .5 0.0 5 .
2.2500 1.6250 -0.48 0.14 3.35 3.66 0.13 5.63 5.12 0.21 0.01
10.73
5 . 5 . 0 -0. .5 5.5 0 .0 . 5.0 .0 . 0 . 0 . 0. 0 . 5
2.1250 1.4688 -0.01 0.14 3.36 4.17 0.13 6.50 5.75 0.39 0.18
14.66
. . 5 -0. . .0 .0 . 05.0 0 .0 . 0 .00 5 . 0.0 0. 5
0.8660 0.7411 -0.03 0.09 2.91 3.07 0.05 4.13 3.98 0.07 0.08
1.65
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 0.000 .000 00 0. 0 . 00 00 . 5 5000
AS A
A AS
A 0
AS 0
0 A
0
0
5 0-S 55 -S
5 0-S 55
5 0-S 55 A
5 0 5
5 0 5
H 5X H 0
H 5 H 5
H 5 H 5 0
5
H H
5 0
0
LL 0 LL 0 0
LL LL 0
L 0 L 0 0
LM LM 0
5 0
5
2.6875 4.3307 0.8661 20600 5340 3670 28100
. . 5 .000 00 0. 0 . 00 00 . 5 5000
B
Caption:
2.6875 4.3750 0.8661 20600 5340 3670 28100
. . . 00 0. 0 . 00 00 . 5 5000
2.6875 4.4375 1.0617 20600 5340 3670 28100
. . . 00 0. 0 . 00 00 . 5 5000
2.6875 4.4375 1.0617 20600 5340 3670 28100
. 0.000 .00 000 0. .5 00 00 .5 000
2.6875 4.7244 1.1418 29900 7740 5100 41900
. 0.000 . 000 0. .5 00 00 .5 000
Caption:
2.6875 4.7244 1.1730 29900 7740 5100 41900
. 0.000 . 000 0. .5 00 00 .5 000
2.6875 4.7244 1.1730 29900 7740 5100 41900
. 0.000 . 000 0. . 00 00 . 000
2.6875 4.7244 1.1730 28800 7470 5570 44300
. . 5 . 000 0. 5 . 5 00 00 . 000
T
C
2.6875 4.8750 1.3745 39700 10300 6100 55700
. . 5 . 00 000 0. 5 . 5 00 00 . 000
2.6875 4.8750 1.5000 39700 10300 6100 55700
. . 5 . 00 000 0. 5 . 5 00 00 . 000
D
2.6875 4.8750 1.5000 39700 10300 6100 55700
. .000 .5 000 0. . 5 00 00 . 000
B
d
2.6875 5.0000 1.4375 40900 10600 6600 58900
. 0.0 .5 000 0. . 5 00 00 . 000
2.6875 5.1200 1.4375 40900 10600 6600 58900
. 0. 5 . 5 000 0. . 55 00 00 . 000
a
2.6875 5.1250 1.6250 48500 12600 7790 67000
. .5 5 . 5 000 0. . 55 00 00 . 000
2.6875 5.3750 1.6250 48500 12600 7790 67000
. .5 5 . 5 5 000 0. . 5 00 0 00 . 5000
2.6875 5.3750 1.6250 56700 14700 9060 75400
. .5 5 .0 000 0. . 00 5 00 . 05000
2.6875 5.3750 1.8125 56000 14500 11800 91000
. . 00 .0 000 0. . 00 5 00 . 05000
2.6875 5.5000 1.8125 56000 14500 11800 91000
. 5 . 00 . 5 000 0. 0. 500 00 0. 0 000
2.6875 6.0000 1.8750 59400 15400 17300 68700
. 5 . 00 . 5 5 000 0. 0 0. 00 0 000 0. 5 0 000
2.6875 6.0000 1.8750 57600 14900 23000 90100
. 5 . 50 50. 00 000 0. 0. 500 00 0. 0 000
2.6875 6.2500 2.0000 59400 15400 17300 68700
. . 5 . 5000 0. 0. 5 00 00 0. 0000
2.6875 6.3750 1.9375 61900 16100 19500 74200
. 50 . 5 . 5 00 0. . 0 0 . 5 00
2.7500 3.8750 0.5313 8400 2180 1630 13100
. 50 . .000 5 00 0. . 00 0 . 5000
2.7500 3.9062 0.6693 10200 2630 2100 16900
. 50 0 . 00 .050 00 0. . 0 000 00 . 000
2.7500 4.0000 0.7500 13900 3610 2850 25000
. 50 . . 5 00 0. . 00 00 . 0 0000
2.7500 4.4375 0.8750 21000 5450 3880 29300
. 50 . 5. 00 0 000 0. . 500 00 . 0 000
2.7500 4.4375 1.0000 23000 5960 4980 37200
. 50 . 00 . 0 0 000 0. . 500 00 . 0 000
2.7500 4.5000 1.0937 23000 5960 4980 37200
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B 0 TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. . 5 -0. 5.0 .0 .0 . 05.0 0 .0 . 0 . 0 5 . 0.0 0.
0.8660 0.7411 -0.03 0.20 2.91 3.27 0.05 4.13 3.98 0.07 0.09
1.61
. . 5 -0. . .0 .0 . 05.0 0 .0 . 0 .00 5 . 0.0 0.
0.8660 0.7411 -0.03 0.09 2.91 3.07 0.05 4.13 3.98 0.07 0.08
1.71
. . -0. . .0 .0 . 0 .0 .0 . 0 .00 5 . 0.0 0.
0.8660 0.9375 -0.03 0.09 2.91 3.07 0.13 4.17 3.90 0.07 0.08
2.05
. . -0. 5.0 .0 .0 . 0 .0 .0 . 0 . 0 5 . 0.0 0.
0.8660 0.9375 -0.03 0.20 2.91 3.27 0.13 4.17 3.90 0.07 0.09
2.01
.00 . - . .5 5.0 .0 . .0 0 .0 .50 . 0 . 0. 0 .
1.1420 0.9230 -0.16 0.14 2.95 3.23 0.13 4.49 4.17 0.06 0.08
2.90
.00 . - . .5 5.0 .0 .0 .0 0 .0 .50 . 0 . 0. 0 . 5
1.1420 0.9542 -0.16 0.14 2.95 3.23 0.08 4.49 4.21 0.06 0.08
2.97
.00 .000 - . .5 5.0 .0 .0 .0 0 .0 .50 . 0 . 0. 0 . 0
1.1420 1.1417 -0.16 0.14 2.95 3.23 0.08 4.49 4.21 0.06 0.08
3.08
0. . - . .5 .0 .0 0. .0 0 .0 . 0 . 0 . 5. 0. .
1.1875 0.9230 -0.11 0.14 2.99 3.23 0.03 4.45 4.21 0.09 0.04
3.05
. . 5 - . .5 .0 .0 . 5.0 0 .0 . 0 . 0 . 0. 0 .
1.4440 1.0620 -0.37 0.14 2.99 3.27 0.19 4.53 4.21 0.09 0.05
3.77
. . - . .5 .0 .0 . .0 0 .0 . 0 . 0 . 0. 0 .
1.4440 1.3125 -0.37 0.14 2.99 3.27 0.13 4.57 4.29 0.09 0.05
4.15
. 0. - . .5 .0 .0 . .0 0 .0 . 0 . 0 . 0. 0 .
1.4440 1.1875 -0.37 0.14 2.99 3.27 0.13 4.57 4.29 0.09 0.05
4.04
. 0 .5 5 - . .5 .0 .0 . 0.0 .0 . 0 . 0 0 0. .
1.4240 1.1250 -0.32 0.14 3.03 3.27 0.13 4.72 4.41 0.13 0.07
4.29
. 0 .5 5 - . .5 .0 .0 0. .0 .0 . 0 . 0 0 0. . 0
1.4240 1.1250 -0.32 0.14 3.03 3.27 0.03 4.76 4.57 0.13 0.07
4.62
. 5 . 50 - . .5 .0 5.0 . .0 .0 . 0 . 0 0 0.0 .
1.6250 1.2500 -0.44 0.14 3.07 3.35 0.13 4.88 4.57 0.16 0.08
5.14
. 5 . 50 - . .5 .0 5.0 . 5.0 .0 . 0 . 0 0 0.0 .
1.6250 1.2500 -0.44 0.14 3.07 3.35 0.13 4.92 4.65 0.16 0.08
5.90
. 5 . 50 - 0. . .0 .0 . .0 .0 . 0 .00 . 0.0 . 0
1.6250 1.2500 -0.43 0.38 3.23 3.86 0.13 5.08 4.76 0.15 0.12
5.74
.0 .5 - . .5 .0 .0 . .0 .0 . 0 .00 . 0.0 .
1.8125 1.4375 -0.34 0.14 3.39 3.62 0.13 5.20 4.65 0.16 0.08
7.13
.0 .5 - . .5 .0 .0 . .0 0.0 . 0 .00 . 0.0 .
1.8125 1.4375 -0.34 0.14 3.39 3.62 0.13 5.24 4.72 0.16 0.08
7.53
.0 . 50 - . .5 .5 .0 . 5.0 0.0 . 0 .00 . . 0.0 . 5
1.8125 1.2500 -0.15 0.14 3.20 3.70 0.13 5.71 5.12 0.32 0.16
8.26
.0 5. 00 . .5 .0 0 .0 . .0 .0 5. 0 . 0 5 0. 0. 5 .
1.8125 1.3819 0.31 0.14 3.43 4.25 0.13 5.83 4.84 0.23 0.13
9.73
.0 . 5 - . .5 .5 .0 . .0 .0 . 0 .00 . . 0.0 .
1.8125 1.3750 -0.15 0.14 3.20 3.70 0.13 5.75 5.16 0.32 0.16
9.63
.0 . 50 0.0 .5 0.5 .0 . 5 .0 .0 . 0 .00 0 . 0.0 .50
1.8125 1.2500 0.00 0.14 3.56 3.82 0.13 6.03 5.43 0.36 0.16
9.92
. 5 .5 5 . .5 .0 .0 .5 .0 .0 .00 . 0 . 55 0.0 0. 0
0.5313 0.3750 0.18 0.06 2.91 3.03 0.06 3.70 3.62 0.04 0.06
0.65
.000 .000 . .5 5.0 .0 .5 5.0 .0 0. 0 0. 0 . 5 .5 0.0 0.
0.6299 0.5118 0.18 0.06 2.95 3.03 0.06 3.74 3.58 0.03 0.02
0.84
.050 5.0 .5 .5 5.0 .0 .5 .0 .0 0. 0 . 0 . 5 .5 0. 0 5 0.50
0.7500 0.5938 0.10 0.06 2.95 3.07 0.06 3.86 3.66 0.03 0.05
1.10
. 5. 5 0.0 .5 .0 .0 0. 0 .0 0 .0 . 0 . 0 0. . 0. 0 0.
0.8660 0.6250 0.00 0.06 2.99 3.07 0.03 4.21 4.09 0.07 0.09
1.72
5. 00 .050 .0 .5 .0 0.0 . 0 .0 0 .0 . 0 .50 . . 0. 0 0.
1.0000 0.7500 0.04 0.06 3.03 3.15 0.13 4.29 3.98 0.09 0.06
2.13
5. 00 . 5 .0 .5 .0 0.0 . 0 .0 0 .0 . 0 .50 . . 0. 0 .0
1.0000 0.8750 0.04 0.06 3.03 3.15 0.13 4.29 4.06 0.09 0.06
2.33
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 50 . 5 0. 000 0. . 00 00 . 000 5
2.7500 4.6250 1.1875 28800 7470 5570 44300
. 50 0.000 .00 000 0. .5 00 00 .5 000 A
2.7500 4.7244 1.1418 29900 7740 5100 41900
. 50 0.000 .00 000 0. .5 00 00 .5 000 A A
2.7500 4.7244 1.1418 29900 7740 5100 41900
. 50 0.000 . 000 0. .5 00 00 .5 000
2.7500 4.7244 1.1730 29900 7740 5100 41900
. 50 0.000 . 000 0. .5 00 00 .5 000
2.7500 4.7244 1.1730 29900 7740 5100 41900
. 50 0.000 . 000 0. . 00 00 . 000 5
2.7500 4.7244 1.1730 28800 7470 5570 44300
. 50 0.000 . 000 0. .5 00 00 .5 000 A
2.7500 4.7244 1.1730 29900 7740 5100 41900
. 50 0.000 .5 5 000 0. . 00 500 . 000 0
2.7500 4.7244 1.2813 37200 9650 5950 56000
. 50 0.000 .5 5 000 0. . 00 500 . 000 0A
2.7500 4.7244 1.2813 37200 9650 5950 56000
. 50 0.000 . 5 000 0. .5 00 00 .5 000 E
2.7500 4.7244 1.8406 29900 7740 5100 41900
. 50 0. 50 5. 00 0 000 0. . 500 00 . 0 000 5 0
2.7500 4.7500 1.0000 23000 5960 4980 37200
. 50 . 5 0. 000 0. .5 00 00 .5 000 X
2.7500 4.8750 1.1875 29900 7740 5100 41900
. 50 .000 .5 000 0. . 5 00 00 . 000 5 5
2.7500 5.0000 1.4375 40900 10600 6600 58900
. 50 .000 .5 000 0. . 5 00 00 . 000 5 -S 5
2.7500 5.0000 1.4375 40900 10600 6600 58900
. 50 .000 .5 000 0. . 5 00 00 . 000 5 X 5
2.7500 5.0000 1.4375 40900 10600 6600 58900
. 50 .000 .5 000 0.50 . 0 00 00 . 5 000 HM HM 0
2.7500 5.0000 1.4375 40300 10400 8970 57600
. 50 .000 .5 000 0.50 . 0 00 00 . 5 000 HM HM
2.7500 5.0000 1.4375 40300 10400 8970 57600
. 50 0. 5 . 5 000 0. . 55 00 00 . 000
2.7500 5.1250 1.6250 48500 12600 7790 67000
. 50 .5 5 . 5 000 0. . 55 00 00 . 000
2.7500 5.3750 1.6250 48500 12600 7790 67000
. 50 . 00 .0 000 0. . 00 5 00 . 05000 H 5 H 5 0
2.7500 5.5000 1.8125 56000 14500 11800 91000
. 50 .050 .5 000 0. 0. 00 00 0. 0 000 HM 5 5 HM 5 0
2.7500 5.7500 1.4375 36200 9380 15000 45400
. 50 .050 . 5 000 0. . 5 00 500 . 5000 55 5
2.7500 5.7500 1.6250 51400 13300 9330 75300
. 50 .050 . 5 000 0. 0. 55 00 000 0. 5 5 000 H H 0
2.7500 5.7500 1.6250 47900 12400 16600 57500
. 50 . 5 5 . 5 000 0. . 00 5 00 . 000 5 0
2.7500 5.8750 2.1250 72200 18700 11600 104000
. 50 . 5 5 . 5 000 0. . 00 5 00 . 000 0
2.7500 5.8750 2.1250 72200 18700 11600 104000
. 50 50.0 . 50 000 0. . 00 500 . 0 000 A
2.7500 5.9090 1.7500 66100 17100 9550 93800
. 50 50.0 . 50 000 0. . 00 500 . 0 000 5A
2.7500 5.9090 1.7500 66100 17100 9550 93800
. 50 5 . 00 . 5 000 0. . 5 00 500 . 5000 55 5
2.7500 6.0000 1.6250 51400 13300 9330 75300
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
0. . - . .5 .0 .0 . .0 0 .0 . 0 . 0 . 5. 0. . 5
1.1875 0.9375 -0.11 0.14 3.03 3.31 0.13 4.41 4.09 0.09 0.04
2.76
.00 . - . .5 .0 .0 . .0 0 .0 .50 . 0 . 0. 0 .
1.1420 0.9230 -0.16 0.14 3.03 3.27 0.13 4.49 4.17 0.06 0.08
2.81
.00 . - . . .0 .0 . .0 0 .0 .50 . 0 . 0. 0 .
1.1420 0.9230 -0.16 0.19 3.03 3.39 0.13 4.49 4.17 0.06 0.08
2.79
.00 . - . .5 .0 .0 .0 .0 0 .0 .50 . 0 . 0. 0 .
1.1420 0.9542 -0.16 0.14 3.03 3.27 0.08 4.49 4.21 0.06 0.08
2.88
.00 .000 - . .5 .0 .0 .0 .0 0 .0 .50 . 0 . 0. 0 .
1.1420 1.1417 -0.16 0.14 3.03 3.27 0.08 4.49 4.21 0.06 0.08
2.99
0. . - . .5 .0 .0 0. .0 0 .0 . 0 . 0 . 5. 0. .
1.1875 0.9230 -0.11 0.14 3.03 3.31 0.03 4.45 4.21 0.09 0.04
2.96
.00 . - . . .0 .0 .0 .0 0 .0 .50 . 0 . 0. 0 . 0
1.1420 0.9542 -0.16 0.19 3.03 3.39 0.08 4.49 4.21 0.06 0.08
2.86
.5 5 . 5 - . .5 .0 .0 . .0 0 .0 . 0 . 0 . . 0. 5 . 5
1.2813 1.0313 -0.25 0.14 3.07 3.31 0.13 4.49 4.21 0.09 0.08
3.20
.5 5 . 5 - . .5 .0 .0 0.5 .0 0 .0 . 0 . 0 . . 0. 5 .
1.2813 1.0313 -0.25 0.14 3.07 3.31 0.02 4.49 4.29 0.09 0.08
3.24
5. . - . .0 .0 .0 .0 .0 0 .0 .50 . 0 . 0. 0 .
1.8096 0.9542 -0.83 0.04 3.03 3.43 0.08 4.49 4.21 0.73 0.08
3.73
5. 00 .050 .0 .5 .0 0.0 . .0 0 .0 . 0 .50 . . 0. 0 .
1.0000 0.7500 0.04 0.06 3.03 3.15 0.13 4.45 4.09 0.09 0.06
2.59
.00 . 05 - . .5 .0 .0 . 5.0 0 .0 .50 . 0 . 0. 0 . 5
1.1420 0.9687 -0.16 0.14 3.03 3.27 0.13 4.53 4.29 0.06 0.08
3.19
. 0 .5 5 - . .5 .0 5.0 . 0.0 .0 . 0 . 0 0 0. .
1.4240 1.1250 -0.32 0.14 3.07 3.35 0.13 4.72 4.41 0.13 0.07
4.18
. 0 .5 5 - . 0. .0 .0 . 0.0 .0 . 0 . 0 0 0. .
1.4240 1.1250 -0.32 0.03 3.07 3.11 0.13 4.72 4.41 0.13 0.07
4.20
. 0 .5 5 - . . .0 .0 . 0.0 .0 . 0 . 0 0 0. .
1.4240 1.1250 -0.32 0.27 3.07 3.58 0.13 4.72 4.41 0.13 0.07
4.11
.5 . - . .5 .0 .0 . .0 .0 .00 . 0 . . 0. 5 . 0
1.4375 1.0625 -0.15 0.14 3.23 3.50 0.13 4.76 4.37 0.16 0.05
4.19
.5 . - . .5 .0 .0 .5 .0 .0 .00 . 0 . . 0. 5 . 0
1.4375 1.0625 -0.15 0.14 3.23 3.50 0.06 4.76 4.45 0.16 0.05
4.19
. 5 . 50 - . .5 0.0 .0 . .0 .0 . 0 . 0 0 0.0 .
1.6250 1.2500 -0.44 0.14 3.15 3.39 0.13 4.88 4.57 0.16 0.08
5.02
. 5 . 50 - . .5 0.0 .0 . 5.0 .0 . 0 . 0 0 0.0 .
1.6250 1.2500 -0.44 0.14 3.15 3.39 0.13 4.92 4.65 0.16 0.08
5.77
.0 .5 - . .5 .0 .0 . .0 0.0 . 0 .00 . 0.0 .
1.8125 1.4375 -0.34 0.14 3.43 3.66 0.13 5.24 4.72 0.16 0.08
7.40
. . . .0 .0 5.0 . .0 .0 . 0 .50 .5 . 0.0 .5
1.3125 0.9375 0.49 0.16 3.38 3.74 0.13 5.47 4.80 0.28 0.18
5.66
. 5 . 50 - . .5 .0 .0 . .0 .0 .50 .00 . 0.0 .
1.6250 1.2500 -0.31 0.14 3.23 3.46 0.13 5.47 5.16 0.18 0.08
7.11
. 5. 00 . .5 .5 5.0 . .0 .0 . 0 . 0 .5 . 0.0 .
1.5625 1.0000 0.17 0.14 3.24 3.74 0.13 5.43 4.88 0.32 0.14
6.30
5 . . 50 - 5.0 5.0 5.0 .0 . 0.0 .0 . 0 0. 0 5 . 0.0 .5
2.1350 1.7500 -0.59 0.20 3.35 3.70 0.13 5.51 5.08 0.11 0.03
9.98
5 . . 50 - 5.0 . 5.0 .0 . 0.0 .0 . 0 0. 0 5 . 0.0 .5
2.1350 1.7500 -0.59 0.25 3.35 3.82 0.13 5.51 5.08 0.11 0.03
9.95
. .5 - . 5.0 .0 .0 . .0 .0 . 0 . 0 0 . 0.0 . 0
1.8375 1.4375 -0.47 0.20 3.23 3.58 0.13 5.59 5.28 0.07 0.05
8.60
. .5 - . .5 .0 .0 . .0 .0 . 0 . 0 0 . 0.0 .
1.8375 1.4375 -0.47 0.14 3.23 3.46 0.13 5.59 5.28 0.07 0.05
8.62
. 5 . 50 - . .5 .0 .0 . .0 .0 .50 .00 . 0.0 .5
1.6250 1.2500 -0.31 0.14 3.23 3.46 0.13 5.55 5.28 0.18 0.08
7.92
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 50 . 5 5 . 5 000 0. 0 .00 00 50 00 . 5 5 000 5
2.7500 6.6250 2.1250 85100 22100 11300 117000
. . 50 . 000 0. 0. 500 00 0. 5 000
2.7525 6.7500 1.9375 63700 16500 21600 78800
. 5 . . 0 00 0. 5 . 500 00 . 0 000
2.7540 4.7812 0.9688 21300 5510 4260 30600
. .5 5 .0 000 0. . 00 5 00 . 05000 H 5 H 5
2.7554 5.3750 1.8125 56000 14500 11800 91000
. . 5 . 0 000 0. 0 0. 00 05000 0. 000 H H 0
2.7554 6.9375 2.1563 76100 19700 23600 96900
0.000 0.000 .000 00 0. . 0 000 00 . 000 JP 0 JP 0 0
2.7559 4.3307 0.8268 19100 4940 3900 25200
0.000 0.000 .000 0 000 0. . 500 00 . 0 000 JLM 0 JLM 0 0
2.7559 4.3307 1.0236 23800 6180 5160 37800
0.000 5.000 .000 000 0. . 000 500 . 000 JM JM 0
2.7559 4.5276 1.1417 31200 8100 5960 44500
0.000 0.000 .00 000 0. .5 00 00 .5 000 A
2.7559 4.7244 1.1418 29900 7740 5100 41900
0.000 . . 0 00 0. 5 . 500 00 . 0 000 5
2.7559 4.7812 0.9688 21300 5510 4260 30600
0.000 . 5 0. 000 0. .5 00 00 .5 000 X
2.7559 4.8750 1.1875 29900 7740 5100 41900
0.000 5.0 5 .000 00 0. 5 . 500 00 . 0 000 5
2.7559 4.9250 0.9449 21300 5510 4260 30600
0.000 0.000 . 000 0. . 5 00 00 . 000 5 0X 5 X
2.7559 5.1181 1.4542 40900 10600 6600 58900
0.000 0.000 .000 5 000 0. . 0 5 00 00 . 5 0000 JF 0 A JF 0 0
2.7559 5.1181 1.6929 57200 14800 8450 80800
0.000 0.000 .000 5 000 0. . 0 5 00 00 . 5 0000 JF 0 JF 0 0
2.7559 5.1181 1.6929 57200 14800 8450 80800
0.000 0.000 .000 000 0. 0. 00 500 0. 5 000 JW 0 JW 0 0
2.7559 5.5118 1.5354 42400 11000 16300 57800
0.000 . 5 5 . 5 000 0. . 00 5 00 . 000 5 0
2.7559 5.8750 2.1250 72200 18700 11600 104000
0.000 50.000 5 .000 000 0. . 00 5 00 . 000 5
2.7559 5.9055 2.1260 72200 18700 11600 104000
0. . 5. 00 0 000 0. . 500 00 . 0 000 0 0
2.7810 4.4375 1.0000 23000 5960 4980 37200
0. . 5. 00 0 000 0. . 500 00 . 0 000 0
2.7810 4.4375 1.0000 23000 5960 4980 37200
. . 5 0. 000 0. . 00 00 . 000
2.8125 4.6250 1.1875 28800 7470 5570 44300
. . 5 0. 000 0. . 00 00 . 000
2.8125 4.6250 1.1875 28800 7470 5570 44300
. 0.000 . 000 0. . 00 00 . 000
2.8125 4.7244 1.1730 28800 7470 5570 44300
. 0.000 .5 5 000 0. . 00 500 . 000 0 0
2.8125 4.7244 1.2813 37200 9650 5950 56000
. 0. 50 .5 5 000 0. . 00 500 . 000 0
2.8125 4.7500 1.2813 37200 9650 5950 56000
. .000 .5 000 0. . 5 00 00 . 000 5 A 5
2.8125 5.0000 1.4375 40900 10600 6600 58900
. .000 .5 000 0. . 5 00 00 . 000 5 -S 5
2.8125 5.0000 1.4375 40900 10600 6600 58900
. .000 .5 000 0.50 . 0 00 00 . 5 000 HM HM 0
2.8125 5.0000 1.4375 40300 10400 8970 57600
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
5 . . 5 - .5 .5 .0 .0 . 55.0 .0 5. 0 . 0 . 0.0 .0
2.2190 1.6250 -0.73 0.14 3.31 3.58 0.13 6.10 5.87 0.20 0.06
13.43
.0 . 50 . .5 5.0 0 .0 . .0 .0 .00 . 0 . 0. 05 5.
1.8125 1.2500 0.17 0.14 3.74 3.98 0.13 6.46 5.79 0.35 0.15
11.83
.0 . .5 .0 .0 .0 .0 .0 0.0 . 0 . 0 . 0. 0 .0
0.9060 0.6875 0.06 0.08 3.07 3.19 0.08 4.57 4.33 0.10 0.08
2.38
.0 .5 - . .5 .0 .0 . .0 .0 . 0 .00 . 0.0 .
1.8125 1.4375 -0.34 0.14 3.43 3.66 0.13 5.20 4.65 0.16 0.08
6.98
5 . .5 - .0 . 5.0 0 .0 . .0 .0 . 0 . 0 . 0. 0 .
2.0938 1.4375 -0.08 0.13 3.74 4.06 0.13 6.46 5.79 0.34 0.13
13.93
0.000 5.500 .5 .0 .0 0.0 .0 05.5 0 .0 .50 . 0 5 . 0. 0.0 5 0.
0.7874 0.6102 0.10 0.08 2.99 3.15 0.08 4.15 3.98 0.06 0.11
1.50
5.000 0.500 0. .0 .0 .0 .5 05.0 .0 . 0 . 0 .5 . 0. 5 0.
0.9843 0.8071 0.01 0.04 3.03 3.07 0.10 4.13 3.86 0.07 0.11
1.93
.000 .000 - .5 .0 .0 .0 .5 0.0 0 .0 .00 . 0 . 5. 0. .
1.1417 0.9055 -0.10 0.12 3.03 3.27 0.10 4.33 4.06 0.04 0.09
2.49
.00 . - . .0 .0 0.0 . .0 0 .0 .50 . 0 . 0. 0 .
1.1420 0.9230 -0.16 0.08 3.03 3.15 0.13 4.49 4.17 0.06 0.08
2.82
.0 . .5 .0 .0 .0 .0 .0 0.0 . 0 . 0 . 0. 0 .0
0.9060 0.6875 0.06 0.08 3.07 3.23 0.08 4.57 4.33 0.10 0.08
2.38
.00 . 05 - . .0 .0 0.0 . 5.0 0 .0 .50 . 0 . 0. 0 . 5
1.1420 0.9687 -0.16 0.08 3.03 3.15 0.13 4.53 4.29 0.06 0.08
3.20
.0 . 0 .5 .0 .0 .0 .0 .0 .0 . 0 . 0 . 0. 0 .
0.9060 0.6563 0.06 0.08 3.07 3.23 0.08 4.65 4.41 0.10 0.08
2.55
. 0 .000 - . .0 .0 .0 .0 .0 .0 . 0 . 0 0 0. .05
1.4240 1.1417 -0.32 0.12 3.07 3.31 0.12 4.76 4.49 0.13 0.07
4.51
.000 5.000 - . .0 0.5 .0 .5 .0 .0 . 0 .00 .5 0.0 . 5
1.6535 1.3780 -0.49 0.28 3.17 3.70 0.10 4.88 4.57 0.08 0.16
5.40
.000 5.000 - . .0 0.5 .0 .5 .0 .0 . 0 .00 .5 0.0 .
1.6535 1.3780 -0.49 0.12 3.17 3.39 0.10 4.88 4.57 0.08 0.16
5.49
5.500 .000 . .0 .0 5.0 .0 .5 .0 5. 0 . 0 5. . 0.0 .
1.3976 1.0630 0.34 0.12 3.23 3.74 0.12 5.25 4.61 0.23 0.18
5.79
5 . . 50 - 5.0 .0 5.0 0.0 . 0.0 .0 . 0 0. 0 5 . 0.0 .5
2.1350 1.7500 -0.59 0.12 3.35 3.54 0.13 5.51 5.08 0.11 0.03
10.00
5 . 5.000 - 5.0 .0 5.0 0.0 .0 0.0 .0 . 0 0. 0 5 . 0.0 .
2.1350 1.7717 -0.59 0.12 3.35 3.54 0.12 5.51 5.08 0.11 0.03
10.17
5. 00 .050 .0 . .0 0.0 . 0 .0 0 .0 . 0 .50 . . 0. 0 0. 5
1.0000 0.7500 0.04 0.05 3.07 3.15 0.13 4.29 3.98 0.09 0.06
2.08
5. 00 .050 .0 .5 .0 5.0 . 0 .0 0 .0 . 0 .50 . . 0. 0 0.
1.0000 0.7500 0.04 0.14 3.07 3.35 0.13 4.29 3.98 0.09 0.06
2.07
0. . - . .5 .0 5.0 0. .0 0 .0 . 0 . 0 . . 0. .
1.1875 0.9375 -0.11 0.14 3.11 3.35 0.03 4.41 4.17 0.09 0.04
2.70
0. . - . .5 .0 5.0 . .0 0 .0 . 0 . 0 . . 0. .
1.1875 0.9375 -0.11 0.14 3.11 3.35 0.13 4.41 4.09 0.09 0.04
2.67
0. . - . .5 .0 5.0 0. .0 0 .0 . 0 . 0 . . 0. . 0
1.1875 0.9230 -0.11 0.14 3.11 3.35 0.03 4.45 4.21 0.09 0.04
2.87
.5 5 . 5 - . .5 .0 .0 . .0 0 .0 . 0 . 0 . . 0. 5 .
1.2813 1.0313 -0.25 0.14 3.11 3.39 0.13 4.49 4.21 0.09 0.08
3.11
.5 5 . 5 - . .5 .0 .0 0. 5.0 0 .0 . 0 . 0 . . 0. 5 . 5
1.2813 1.0313 -0.25 0.14 3.11 3.39 0.03 4.53 4.29 0.09 0.08
3.19
. 0 .5 5 - . .5 0.0 .0 . 0.0 .0 . 0 . 0 0 0. . 5
1.4240 1.1250 -0.32 0.14 3.15 3.39 0.13 4.72 4.41 0.13 0.07
4.07
. 0 .5 5 - . . 0.0 .0 . 0.0 .0 . 0 . 0 0 0. .
1.4240 1.1250 -0.32 0.25 3.15 3.62 0.13 4.72 4.41 0.13 0.07
4.01
.5 . - . .5 .0 .0 . .0 .0 .00 . 0 . . 0. 5 . 5
1.4375 1.0625 -0.15 0.14 3.23 3.58 0.13 4.76 4.37 0.16 0.05
4.08
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. .000 .5 000 0.50 . 0 00 00 . 5 000 HM HM
2.8125 5.0000 1.4375 40300 10400 8970 57600
. 0. 5 . 5 000 0. . 55 00 00 . 000
2.8125 5.1250 1.6250 48500 12600 7790 67000
. 0. 5 . 5 000 0. . 55 00 00 . 000 5
2.8125 5.1250 1.6250 48500 12600 7790 67000
. . 50 . 000 0. 0 . 00 0000 . 000 5 0
2.8125 5.2500 1.3125 37600 9750 6750 58900
. .5 5 0. 000 0. . 5 00 00 . 000 5-S
2.8125 5.3750 1.1875 32100 8330 6340 48600
. .5 5 . 5 000 0. . 55 00 00 . 000
2.8125 5.3750 1.6250 48500 12600 7790 67000
. .5 5 . 5 000 0. . 55 00 00 . 000 5
2.8125 5.3750 1.6250 48500 12600 7790 67000
. .5 5 . 5 000 0. . 55 00 00 . 000 5X
2.8125 5.3750 1.6250 48500 12600 7790 67000
. .5 5 . 5 5 000 0. . 5 00 0 00 . 5000 H H 0
2.8125 5.3750 1.6250 56700 14700 9060 75400
. .5 5 .0 000 0. . 00 5 00 . 05000 H 5 5 H 5
2.8125 5.3750 1.8125 56000 14500 11800 91000
. . 00 .0 000 0. . 00 5 00 . 05000 H 5 5 H 5 0
2.8125 5.5000 1.8125 56000 14500 11800 91000
.0 5 . 5. 00 0 000 0. . 500 00 . 0 000 5 0
2.8750 4.4375 1.0000 23000 5960 4980 37200
.0 5 . 5 5. 00 0 000 0.5 . 00 00 . 5 000 LM 5 LM 0
2.8750 4.6250 1.0000 24500 6360 5550 41200
.0 5 . 5 0. 000 0. . 00 00 . 000
2.8750 4.6250 1.1875 28800 7470 5570 44300
.0 5 0.000 . 000 0. . 00 00 . 000
2.8750 4.7244 1.1730 28800 7470 5570 44300
.0 5 0.000 . 000 0. . 00 00 . 000 A
2.8750 4.7244 1.1730 28800 7470 5570 44300
.0 5 5. 5. 00 0 000 0. . 00 0000 . 0 000 0 0
2.8750 4.9375 1.0000 24400 6320 4500 39900
.0 5 .000 0. 000 0. . 00 00 . 000 0
2.8750 5.0000 1.1875 33500 8690 6230 49800
.0 5 .000 .5 000 0. . 5 00 00 . 000 5 5
2.8750 5.0000 1.4375 40900 10600 6600 58900
.0 5 .000 .5 000 0. . 5 00 00 . 000 5 5 X
2.8750 5.0000 1.4375 40900 10600 6600 58900
.0 5 .000 .5 000 0. . 5 00 00 . 000 5 X 5
2.8750 5.0000 1.4375 40900 10600 6600 58900
.0 5 .000 .5 000 0. . 5 00 00 . 000 5 X 5 X
2.8750 5.0000 1.4375 40900 10600 6600 58900
.0 5 .000 .5 000 0. . 5 00 00 . 000 5 XA 5
2.8750 5.0000 1.4375 40900 10600 6600 58900
.0 5 0.000 . 000 0. . 5 00 00 . 000 5 X 5 X
2.8750 5.1181 1.4542 40900 10600 6600 58900
.0 5 0.0 .5 000 0. . 5 00 00 . 000 5 5
2.8750 5.1200 1.4375 40900 10600 6600 58900
.0 5 . .5 000 0. 0 . 00 00 . 5 000 5 5
2.8750 5.5115 1.4375 43000 11200 7720 65400
.0 5 .050 . 5 000 0. . 5 00 500 . 5000 5 5
2.8750 5.7500 1.6250 51400 13300 9330 75300
.0 5 . 5 5 . 5 000 0. . 00 5 00 . 000 0 0
2.8750 5.8750 2.1250 72200 18700 11600 104000
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.5 . - . .5 .0 .0 .5 .0 .0 .00 . 0 . . 0. 5 . 5
1.4375 1.0625 -0.15 0.14 3.23 3.58 0.06 4.76 4.45 0.16 0.05
4.08
. 5 . 50 - . .5 .0 .0 . .0 .0 . 0 . 0 0 0.0 .
1.6250 1.2500 -0.44 0.14 3.19 3.43 0.13 4.88 4.57 0.16 0.08
4.91
. 5 . 50 - . . .0 .0 . .0 .0 . 0 . 0 0 0.0 .
1.6250 1.2500 -0.44 0.25 3.19 3.66 0.13 4.88 4.57 0.16 0.08
4.83
. . 5 - . .5 .0 .0 . .0 .0 . 0 . 0 . 0. .0
1.3125 1.0313 -0.17 0.14 3.23 3.46 0.13 5.04 4.69 0.09 0.09
4.50
. . 5 -0. .5 .0 .0 . 0.0 .0 .50 . 0 05 . 0. 5 .
1.1720 0.8750 -0.03 0.14 3.23 3.46 0.13 5.12 4.80 0.10 0.08
4.25
. 5 . 50 - . .5 .0 .0 . 5.0 .0 . 0 . 0 0 0.0 .5
1.6250 1.2500 -0.44 0.14 3.19 3.43 0.13 4.92 4.65 0.16 0.08
5.67
. 5 . 50 - . . .0 .0 . 5.0 .0 . 0 . 0 0 0.0 .5
1.6250 1.2500 -0.44 0.25 3.19 3.66 0.13 4.92 4.65 0.16 0.08
5.59
. 5 . 50 - . . .5 .0 . 5.0 .0 . 0 . 0 0 0.0 .5
1.6250 1.2500 -0.44 0.25 3.25 3.66 0.13 4.92 4.65 0.16 0.08
5.59
. 5 . 50 - 0. .5 .0 .0 . .0 .0 . 0 .00 . 0.0 .5
1.6250 1.2500 -0.43 0.14 3.27 3.50 0.13 5.08 4.76 0.15 0.12
5.65
.0 .5 - . .5 .0 .0 . .0 .0 . 0 .00 . 0.0 .
1.8125 1.4375 -0.34 0.14 3.46 3.70 0.13 5.20 4.65 0.16 0.08
6.86
.0 .5 - . .5 .0 .0 . .0 0.0 . 0 .00 . 0.0 .
1.8125 1.4375 -0.34 0.14 3.46 3.70 0.13 5.24 4.72 0.16 0.08
7.26
5. 00 .050 .0 .5 0.0 .0 . 0 .0 0 .0 . 0 .50 . . 0. 0 0.
1.0000 0.7500 0.04 0.14 3.15 3.39 0.13 4.29 3.98 0.09 0.06
1.97
5. 00 .050 . .5 .0 .0 . .0 05.0 .50 . 0 . . 0. .0
1.0000 0.7500 0.09 0.14 3.19 3.43 0.13 4.45 4.13 0.10 0.06
2.25
0. . - . .5 0.0 .0 . .0 0 .0 . 0 . 0 . . 0. .
1.1875 0.9375 -0.11 0.14 3.15 3.43 0.13 4.41 4.09 0.09 0.04
2.57
0. . - . .5 0.0 .0 0. .0 0 .0 . 0 . 0 . . 0. .
1.1875 0.9230 -0.11 0.14 3.15 3.43 0.03 4.45 4.21 0.09 0.04
2.77
0. . - . 0. .0 .0 0. .0 0 .0 . 0 . 0 . 5. 0. .
1.1875 0.9230 -0.11 0.01 3.19 3.19 0.03 4.45 4.21 0.09 0.04
2.80
5. 00 . 5 0.5 .5 .0 .0 .5 0.0 5.0 .50 . 0 . . 0. .
1.0000 0.7813 0.02 0.14 3.23 3.46 0.06 4.72 4.53 0.06 0.07
2.84
.000 . 5 - . .5 .0 .0 . .0 .0 . 0 0. 0 . . 0. .5
1.2205 0.8750 -0.11 0.14 3.19 3.46 0.13 4.76 4.49 0.13 0.03
3.34
. 0 .5 5 - . .5 .0 .0 . 0.0 .0 . 0 . 0 0 0. .
1.4240 1.1250 -0.32 0.14 3.19 3.46 0.13 4.72 4.41 0.13 0.07
3.95
. 0 .5 5 - . .5 .0 .0 0. 0.0 .0 . 0 . 0 0 0. .
1.4240 1.1250 -0.32 0.14 3.19 3.46 0.03 4.72 4.49 0.13 0.07
3.99
. 0 .5 5 - . . .0 0.0 . 0.0 .0 . 0 . 0 0 0. . 0
1.4240 1.1250 -0.32 0.19 3.19 3.54 0.13 4.72 4.41 0.13 0.07
3.96
. 0 .5 5 - . . .0 0.0 0. 0.0 .0 . 0 . 0 0 0. .
1.4240 1.1250 -0.32 0.19 3.19 3.54 0.03 4.72 4.49 0.13 0.07
4.00
. 0 .5 5 - . . .0 .0 . 0.0 .0 . 0 . 0 0 0. .
1.4240 1.1250 -0.32 0.25 3.19 3.66 0.13 4.72 4.41 0.13 0.07
3.94
. 0 .000 - . . .0 0.0 .0 .0 .0 . 0 . 0 0 0. . 5
1.4240 1.1417 -0.32 0.19 3.19 3.54 0.12 4.76 4.49 0.13 0.07
4.30
. 0 .5 5 - . .5 .0 .0 0. .0 .0 . 0 . 0 0 0. . 5
1.4240 1.1250 -0.32 0.14 3.19 3.46 0.03 4.76 4.57 0.13 0.07
4.29
.0 .5 5 -5. .5 .0 0.0 . .0 5.0 . 0 . 0 0. 5 .
1.4212 1.1250 -0.21 0.14 3.27 3.54 0.13 5.24 4.92 0.14 0.07
5.43
. 5 . 50 - . .5 5.0 .0 . .0 .0 .50 .00 . 0.0 .
1.6250 1.2500 -0.31 0.14 3.35 3.58 0.13 5.47 5.16 0.18 0.08
6.86
5 . . 50 - 5.0 .5 .0 .0 . 0.0 .0 . 0 0. 0 5 . 0.0 .
2.1350 1.7500 -0.59 0.14 3.43 3.66 0.13 5.51 5.08 0.11 0.03
9.67
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
.0 5 . 5 5 . 5 000 0. . 00 5 00 . 000 0 0A
2.8750 5.8750 2.1250 72200 18700 11600 104000
.0 5 50.0 . 50 000 0. . 00 500 . 0 000
2.8750 5.9090 1.7500 66100 17100 9550 93800
.0 5 5 . 00 . 5 000 0. . 5 00 500 . 5000 5 5
2.8750 6.0000 1.6250 51400 13300 9330 75300
. . 5. 00 0 000 0. . 500 00 . 0 000 0
2.9062 4.4375 1.0000 23000 5960 4980 37200
. .000 .5 000 0. . 5 00 00 . 000 5 5
2.9062 5.0000 1.4375 40900 10600 6600 58900
. . .5 000 0. 0 . 00 00 . 5 000 5 5
2.9375 5.5115 1.4375 43000 11200 7720 65400
. 5 . 00 . 5 000 0. . 5 00 500 . 5000 5 5
2.9375 6.0000 1.6250 51400 13300 9330 75300
. .000 . 00 0. 5 . 500 00 . 0 000 500
2.9518 5.0000 1.0625 21300 5510 4260 30600
. . . 000 0. . 00 00 . 000
2.9523 5.1171 1.3090 33500 8690 6230 49800
5.000 5.000 5.000 0000 0. . 00 00 . 000 JLM JLM 0
2.9528 4.5276 0.9843 24700 6390 5020 37500
5.000 0.000 .000 000 0. . 5 00 00 . 000 JM A JM 0
2.9528 4.7244 1.2205 33200 8600 6540 51500
5.000 0.000 .000 000 0. . 5 00 00 . 000 JM JM 0
2.9528 4.7244 1.2205 33200 8600 6540 51500
5.000 5.000 5 .000 000 0. . 00 5 00 . 000 JH 5 JH 5 0
2.9528 5.7087 2.0079 72200 18700 11600 104000
5. . .000 000 0. . 0 5 00 00 . 000 HM 5 HM 5 0
2.9916 5.1959 1.5354 49900 12900 7370 72800
.000 0.000 .000 00 0. 5 . 500 00 . 0 000 X X
2.9921 4.7244 0.9055 21300 5510 4260 30600
. 00 05.5 0 . 5 00 0. . 0 0 . 000 LL LL 0
3.0000 4.1563 0.5313 8530 2210 1790 13700
. 00 0 .5 .050 00 0.50 . 0 00 00 . 0000 L L 0
3.0000 4.3125 0.7500 14400 3730 3210 27000
. 00 . . 0 00 0. 5 . 500 00 . 0 000 00
3.0000 4.7812 0.9688 21300 5510 4260 30600
. 00 . . 0 00 0. 5 . 500 00 . 0 000 0
3.0000 4.7812 0.9688 21300 5510 4260 30600
. 00 5. 5. 00 0 000 0. . 00 0000 . 0 000 0
3.0000 4.9375 1.0000 24400 6320 4500 39900
. 00 5. 5. 00 0 000 0. . 00 0000 . 0 000 A 0
3.0000 4.9375 1.0000 24400 6320 4500 39900
. 00 .000 . 00 0. 5 . 500 00 . 0 000 00 500
3.0000 5.0000 1.0625 21300 5510 4260 30600
. 00 .000 . 00 0. 5 . 500 00 . 0 000 0 500
3.0000 5.0000 1.0625 21300 5510 4260 30600
. 00 .000 0. 000 0. . 00 00 . 000 0
3.0000 5.0000 1.1875 33500 8690 6230 49800
. 00 .000 0. 000 0. . 00 00 . 000 0
3.0000 5.0000 1.1875 33500 8690 6230 49800
. 00 . 50 0. 000 0. . 5 00 00 . 000 5A A
3.0000 5.2500 1.1875 32100 8330 6340 48600
. 00 . 50 . 000 0. 0 . 00 0000 . 000 0
3.0000 5.2500 1.3125 37600 9750 6750 58900
. 00 . 50 . 000 0. 0 . 00 0000 . 000 0
3.0000 5.2500 1.3125 37600 9750 6750 58900
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
5 . . 50 - 5.0 .5 .0 .0 0. 0.0 .0 . 0 0. 0 5 . 0.0 .
2.1350 1.7500 -0.59 0.14 3.43 3.66 0.03 5.51 5.16 0.11 0.03
9.71
. .5 - . .5 5.0 .0 . .0 .0 . 0 . 0 0 . 0.0 .
1.8375 1.4375 -0.47 0.14 3.35 3.58 0.13 5.59 5.28 0.07 0.05
8.34
. 5 . 50 - . .5 5.0 .0 . .0 .0 .50 .00 . 0.0 .
1.6250 1.2500 -0.31 0.14 3.35 3.58 0.13 5.55 5.28 0.18 0.08
7.67
5. 00 .050 .0 .5 0.0 .0 . 0 .0 0 .0 . 0 .50 . . 0. 0 0.
1.0000 0.7500 0.04 0.06 3.15 3.27 0.13 4.29 3.98 0.09 0.06
1.93
. 0 .5 5 - . 0. .0 .0 . 0.0 .0 . 0 . 0 0 0. .
1.4240 1.1250 -0.32 0.03 3.23 3.27 0.13 4.72 4.41 0.13 0.07
3.92
.0 .5 5 -5. .5 5.0 .0 . .0 5.0 . 0 . 0 0. 5 .
1.4212 1.1250 -0.21 0.14 3.35 3.58 0.13 5.24 4.92 0.14 0.07
5.32
. 5 . 50 - . .5 .0 .0 . .0 .0 .50 .00 . 0.0 .
1.6250 1.2500 -0.31 0.14 3.39 3.62 0.13 5.55 5.28 0.18 0.08
7.54
.0 . .5 .0 .0 5.0 . .0 .0 . 0 . 0 . 0. 0 . 0
0.9060 0.7812 0.06 0.08 3.23 3.35 0.13 4.65 4.41 0.10 0.08
2.64
.000 .000 - . . .0 .0 . .0 5.0 . 0 0. 0 . . 0. .
1.2205 1.0630 -0.11 0.25 3.27 3.70 0.09 4.84 4.53 0.13 0.03
3.70
5.000 .000 0.5 .0 .0 .0 .5 0.0 0 .0 .00 . 0 . 0.5 0. 0 0.
0.9843 0.7480 0.02 0.12 3.19 3.43 0.10 4.33 4.09 0.08 0.08
1.92
.500 5.000 - .0 .0 .0 .0 .5 5.0 0 .0 . 0 . 0 5 . 0. .
1.1614 0.9843 -0.08 0.24 3.27 3.70 0.10 4.53 4.25 0.08 0.11
2.80
.500 5.000 - .0 .0 .0 .0 .5 5.0 0 .0 . 0 . 0 5 . 0. . 0
1.1614 0.9843 -0.08 0.12 3.26 3.46 0.10 4.53 4.25 0.08 0.11
2.86
5 .000 .000 - . .0 .0 .0 .5 .0 .0 .00 . 0 5 . 0.0 . 0
2.0079 1.6535 -0.56 0.12 3.50 3.70 0.10 5.47 5.08 0.08 0.12
8.39
.000 .000 - . .0 5.0 .0 .5 .0 .0 . 0 . 0 0. 0.0 .
1.5354 1.2598 -0.38 0.28 3.35 3.86 0.14 4.96 4.65 0.05 0.11
4.65
.0 .000 .5 . .0 .0 . 5.0 0.0 . 0 . 0 . 0. 0 0.
0.9060 0.6299 0.06 0.09 3.27 3.39 0.09 4.53 4.33 0.10 0.08
1.94
. 5 .5 5 . .5 .0 .0 .5 0 .0 .0 0. 0 . 0 5. . 0.0 5 0.
0.5313 0.3750 0.26 0.06 3.19 3.27 0.06 4.02 3.90 0.04 0.05
0.71
.050 5.0 5. .5 .0 .0 .5 05.0 00.0 0. 0 . 0 5 . 0. 0.5
0.7500 0.5938 0.20 0.06 3.23 3.31 0.06 4.13 3.94 0.04 0.05
1.28
.0 . .5 .0 .0 .0 .0 .0 0.0 . 0 . 0 . 0. 0 0.
0.9060 0.6875 0.06 0.08 3.27 3.39 0.08 4.57 4.33 0.10 0.08
2.11
.0 . .5 .5 .0 .0 .0 .0 0.0 . 0 . 0 . 0. 0 0.
0.9060 0.6875 0.06 0.14 3.27 3.50 0.08 4.57 4.33 0.10 0.08
2.08
5. 00 . 5 0.5 .5 .0 .0 .5 0.0 5.0 .50 . 0 . . 0. .
1.0000 0.7813 0.02 0.14 3.31 3.58 0.06 4.72 4.53 0.06 0.07
2.67
5. 00 . 5 0.5 0. .0 5.0 .5 0.0 5.0 .50 . 0 . . 0. .
1.0000 0.7813 0.02 0.03 3.31 3.35 0.06 4.72 4.53 0.06 0.07
2.70
.0 . .5 .0 .0 .0 . .0 .0 . 0 . 0 . 0. 0 .
0.9060 0.7812 0.06 0.08 3.27 3.39 0.13 4.65 4.41 0.10 0.08
2.59
.0 . .5 .5 .0 .0 . .0 .0 . 0 . 0 . 0. 0 .
0.9060 0.7812 0.06 0.14 3.27 3.50 0.13 4.65 4.41 0.10 0.08
2.56
.000 . 5 - . .5 .0 0.0 . .0 .0 . 0 0. 0 . . 0. .
1.2205 0.8750 -0.11 0.14 3.31 3.54 0.13 4.76 4.49 0.13 0.03
3.16
.000 . 5 - . . .0 .0 . .0 .0 . 0 0. 0 . . 0. . 0
1.2205 0.8750 -0.11 0.25 3.31 3.78 0.13 4.76 4.49 0.13 0.03
3.08
. . 5 -0. .5 .0 .0 . .0 0.0 .50 . 0 05 . 0. 5 .
1.1720 0.8750 -0.03 0.14 3.39 3.62 0.13 5.04 4.72 0.10 0.08
3.70
. . 5 - . . 5.0 .0 . .0 .0 . 0 . 0 . 0. .
1.3125 1.0313 -0.17 0.25 3.35 3.82 0.13 5.04 4.69 0.09 0.09
4.12
. . 5 - . .5 5.0 .0 . .0 .0 . 0 . 0 . 0. . 0
1.3125 1.0313 -0.17 0.14 3.35 3.58 0.13 5.04 4.69 0.09 0.09
4.18
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 00 . 50 . 000 0. 0 . 00 0000 . 000 0 0
3.0000 5.2500 1.3125 37600 9750 6750 58900
. 00 . 50 . 000 0. 0 . 00 0000 . 000 0A
3.0000 5.2500 1.3125 37600 9750 6750 58900
. 00 . 50 . 0 000 0. 0 . 5 00 00 . 5 5 000 HM5 HM5 0
3.0000 5.2500 1.5625 45400 11800 8110 79300
. 00 5. . 50 000 0. . 00 00 . 0000 5 0 5 5
3.0000 5.3438 1.7500 53200 13800 9600 85400
. 00 .5 5 0. 000 0. . 5 00 00 . 000 5A
3.0000 5.3750 1.1875 32100 8330 6340 48600
. 00 .5 5 0. 000 0. . 5 00 00 . 000 5AX
3.0000 5.3750 1.1875 32100 8330 6340 48600
. 00 .5 5 .0 000 0. . 00 5 00 . 05000 H 5 H 5
3.0000 5.3750 1.8125 56000 14500 11800 91000
. 00 . 00 .5 000 0. 0 . 00 00 . 5 000 5 5 5 X
3.0000 5.5000 1.4375 43000 11200 7720 65400
. 00 . 00 .0 000 0. . 00 5 00 . 05000 H 5 H 5 0
3.0000 5.5000 1.8125 56000 14500 11800 91000
. 00 . .5 000 0. 0 . 00 00 . 5 000 5 5 5
3.0000 5.5115 1.4375 43000 11200 7720 65400
. 00 . .5 000 0. 0 . 00 0000 . 000
3.0000 5.5115 1.4375 37600 9750 6750 58900
. 00 . .5 000 0. 0 . 00 0000 . 000 0
3.0000 5.5115 1.4375 37600 9750 6750 58900
. 00 . .5 000 0. 0 . 00 00 . 5 000 5 5-S 5
3.0000 5.5115 1.4375 43000 11200 7720 65400
. 00 . . 50 000 0. .55 5 00 00 .5 000 HM5 5 5 HM5 5
3.0000 5.5960 1.7500 50200 13000 8600 71400
. 00 .050 . 5 000 0. . 5 00 500 . 5000 5 5
3.0000 5.7500 1.6250 51400 13300 9330 75300
. 00 . 5 5 . 5 000 0. . 00 5 00 . 000 0
3.0000 5.8750 2.1250 72200 18700 11600 104000
. 00 . 5 5 . 5 000 0. . 00 5 00 . 000 0
3.0000 5.8750 2.1250 72200 18700 11600 104000
. 00 . 5 5 . 5 000 0. . 00 5 00 . 000 A 0
3.0000 5.8750 2.1250 72200 18700 11600 104000
. 00 50.000 5. 00000 0. . 5 00 00 . 000 5 0A JM
3.0000 5.9055 1.4160 45000 11700 8820 71600
. 00 50.0 . 50 000 0. . 00 500 . 0 000 -S
3.0000 5.9090 1.7500 66100 17100 9550 93800
. 00 5 . 00 . 00000 0. . 5 00 00 . 000 5 0A 5 A
3.0000 6.0000 1.5625 45000 11700 8820 71600
. 00 5 . 00 . 5 000 0. . 5 00 500 . 5000 5 5
3.0000 6.0000 1.6250 51400 13300 9330 75300
. 00 0.000 5 . 5 000 0. 0 .50 000 000 . 5 000 5 5 5X
3.0000 6.2992 2.1250 77200 20000 13700 118000
. 00 . 5 . 5 0 000 0. . 500 5 00 . 000 55 5
3.0000 6.3750 1.8750 68100 17700 10300 99200
. 00 . 5 . 5000 0. 0. 5 00 00 0. 0000 5 0
3.0000 6.3750 1.9375 61900 16100 19500 74200
. 00 . 5 5 . 5 000 0. 0 .50 000 000 . 5 000 5 5 5 5
3.0000 6.3750 2.1250 77200 20000 13700 118000
. 00 . 5 5 . 5 000 0. 0 .50 000 000 . 5 000 5 5 5
3.0000 6.3750 2.1250 77200 20000 13700 118000
. 00 . 5 5 . 5 000 0. 0 .50 000 000 . 5 000 5 5
3.0000 6.3750 2.1250 77200 20000 13700 118000
B
Caption:
Caption:
C
D
B
d
a
B 0 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. . 5 - . 0. 5.0 .0 . .0 .0 . 0 . 0 . 0. .
1.3125 1.0313 -0.17 0.03 3.35 3.39 0.13 5.04 4.69 0.09 0.09
4.21
. . 5 - . .5 5.0 .0 0. .0 .0 . 0 . 0 . 0. .
1.3125 1.0313 -0.17 0.14 3.35 3.58 0.03 5.04 4.76 0.09 0.09
4.22
. .5 5 - . .5 .0 .0 . .0 .0 . 0 .50 5 0.0 55 . 0
1.5625 1.2813 -0.29 0.14 3.43 3.66 0.13 5.04 4.65 0.07 0.10
5.30
. 00 . 5 - . .5 .0 .0 . 0.0 .0 5. 0 . 0 5 . 0.0 0 .
1.8150 1.3750 -0.46 0.14 3.46 3.70 0.13 5.12 4.69 0.21 0.06
5.94
. . 5 -0. .5 .0 .0 . 0.0 .0 .50 . 0 05 . 0. 5 . 0
1.1720 0.8750 -0.03 0.14 3.39 3.62 0.13 5.12 4.80 0.10 0.08
3.96
. . 5 -0. . .0 .0 . 0.0 .0 .50 . 0 05 . 0. 5 .
1.1720 0.8750 -0.03 0.25 3.39 3.86 0.13 5.12 4.80 0.10 0.08
3.90
.0 .5 - . .5 .0 .0 . .0 .0 . 0 .00 . 0.0 .
1.8125 1.4375 -0.34 0.14 3.46 3.86 0.13 5.20 4.65 0.16 0.08
6.42
.0 .5 5 -5. .5 .0 .0 . .0 5.0 . 0 . 0 0. 5 .
1.4212 1.1250 -0.21 0.14 3.39 3.62 0.13 5.24 4.92 0.14 0.07
5.14
.0 .5 - . .5 .0 .0 . .0 0.0 . 0 .00 . 0.0 . 0
1.8125 1.4375 -0.34 0.14 3.46 3.86 0.13 5.24 4.72 0.16 0.08
6.82
.0 .5 5 -5. .5 .0 .0 . .0 5.0 . 0 . 0 0. 5 .
1.4212 1.1250 -0.21 0.14 3.39 3.62 0.13 5.24 4.92 0.14 0.07
5.20
. . 0 - . .5 5.0 .0 . 0.0 .0 . 0 . 0 . 0. .
1.3125 1.1563 -0.17 0.14 3.35 3.58 0.13 5.12 4.80 0.09 0.09
5.13
. . 0 - . 0. 5.0 .0 . 0.0 .0 . 0 . 0 . 0. .
1.3125 1.1563 -0.17 0.03 3.35 3.39 0.13 5.12 4.80 0.09 0.09
5.15
.0 .5 5 -5. . .0 .0 . .0 5.0 . 0 . 0 0. 5 .
1.4212 1.1250 -0.21 0.27 3.39 3.90 0.13 5.24 4.92 0.14 0.07
5.12
. 00 . - 0. .5 .0 .0 . .0 .0 .00 - . 0 . 0.0 .
1.8150 1.3125 -0.43 0.14 3.43 3.62 0.13 5.24 4.88 0.24 -0.05
6.41
. 5 . 50 - . .5 .0 .0 . .0 .0 .50 .00 . 0.0 .
1.6250 1.2500 -0.31 0.14 3.43 3.66 0.13 5.47 5.16 0.18 0.08
6.59
5 . . 50 - 5.0 .5 .5 .0 . 0.0 .0 . 0 0. 0 5 . 0.0 .
2.1350 1.7500 -0.59 0.14 3.52 3.78 0.13 5.51 5.08 0.11 0.03
9.32
5 . . 50 - 5.0 . .5 0 .0 . 0.0 .0 . 0 0. 0 5 . 0.0 . 0
2.1350 1.7500 -0.59 0.25 3.52 4.02 0.13 5.51 5.08 0.11 0.03
9.26
5 . . 50 - 5.0 . .5 0 .0 . 0.0 .0 . 0 0. 0 5 . 0.0 . 5
2.1350 1.7500 -0.59 0.38 3.52 4.25 0.13 5.51 5.08 0.11 0.03
9.15
. .000 - .5 .5 .0 5.0 .5 .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.0630 -0.10 0.14 3.50 3.74 0.10 5.63 5.31 0.16 0.07
6.48
. .5 - . .5 .0 .0 . .0 .0 . 0 . 0 0 . 0.0 . 5
1.8375 1.4375 -0.47 0.14 3.43 3.66 0.13 5.59 5.28 0.07 0.05
8.04
. 0. - .5 .5 .0 5.0 . .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.1875 -0.10 0.14 3.50 3.74 0.13 5.67 5.31 0.16 0.07
7.09
. 5 . 50 - . .5 .0 .0 . .0 .0 .50 .00 . 0.0 .
1.6250 1.2500 -0.31 0.14 3.43 3.66 0.13 5.55 5.28 0.18 0.08
7.40
55. 00 . 50 - . .5 .0 .0 .0 5 .5 .0 . 0 0. 0 .5 0. 0 5.
2.1693 1.7500 -0.52 0.14 3.62 3.90 0.12 6.04 5.55 0.16 0.03
11.54
. 0 . 00 - . .5 .0 5.0 . 50.0 .0 . 0 0. 0 . 0.0 5 .
1.9000 1.5000 -0.47 0.14 3.46 3.74 0.13 5.91 5.67 0.13 0.04
10.34
.0 . 50 0.0 .5 0.5 0 .0 . 5 .0 .0 . 0 .00 0 . 0.0 .
1.8125 1.2500 0.00 0.14 3.56 4.06 0.13 6.03 5.43 0.36 0.16
9.20
55. 00 . - . . .0 0 .0 . 5 .0 .0 . 0 0. 0 .5 0. 0 5.
2.1693 1.6875 -0.52 0.25 3.62 4.09 0.13 6.06 5.55 0.16 0.03
11.78
55. 00 . - . .5 .0 .0 . 5 .0 .0 . 0 0. 0 .5 0. 0 5.
2.1693 1.6875 -0.52 0.14 3.62 3.90 0.13 6.06 5.55 0.16 0.03
11.84
55. 00 . - . .5 .0 .0 0. 5 .0 .0 . 0 0. 0 .5 0. 0 5.
2.1693 1.6875 -0.52 0.14 3.62 3.90 0.03 6.06 5.67 0.16 0.03
11.89
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 00 . 5 5 . 5 000 0. 0 .50 000 000 . 5 000 5 C 5 5
3.0000 6.3750 2.1250 77200 20000 13700 118000
. 00 . 5 . 5 0 000 0. . 500 5 00 . 000 55 5
3.0000 6.6250 1.8750 68100 17700 10300 99200
. 00 . 5 5 . 5 000 0. 0 .00 00 50 00 . 5 5 000
3.0000 6.6250 2.1250 85100 22100 11300 117000
. 00 . 5 5 . 5 000 0. 0 .00 00 50 00 . 5 5 000
3.0000 6.6250 2.1250 85100 22100 11300 117000
. 00 . 50 . 000 0. 0. 500 00 0. 5 000 0
3.0000 6.7500 1.9375 63700 16500 21600 78800
. 00 . 50 5 . 000 0. 0. 500 00 0. 5 000
3.0000 6.7500 2.0265 63700 16500 21600 78800
. 00 . 00 5 . 000 0. 0. 500 00 0. 5 000 0 0
3.0000 7.0000 2.0625 63700 16500 21600 78800
. 00 . 00 55.5 000 0. 0. 500 00 0. 5 000 0
3.0000 7.0000 2.1875 63700 16500 21600 78800
. 00 0. 5 5 . 5 50000 0. 0. 0 00 000 0. 0 5 000 H 0 H 0
3.0000 7.1250 2.1250 78700 20400 25600 103000
. 00 0.500 5 . 50 000 0. . 000 00 . 000 HH 0 HH 0
3.0000 7.5000 2.2500 111000 28800 16500 156000
. . 5 5. 00 0 000 0.5 . 00 00 . 5 000 LM LM 0
3.0625 4.6250 1.0000 24500 6360 5550 41200
. 0.000 .000 00 0. 5 . 500 00 . 0 000 0 X
3.0625 4.7244 0.9055 21300 5510 4260 30600
. 0. 50 . 0 000 0.5 . 00 00 . 5 000 LM LM
3.0625 4.7500 1.0938 24500 6360 5550 41200
. . . 0 00 0. 5 . 500 00 . 0 000 0
3.0625 4.7812 0.9688 21300 5510 4260 30600
. . . 0 00 0. 5 . 500 00 . 0 000 0
3.0625 4.7812 0.9688 21300 5510 4260 30600
. .000 0. 000 0. . 00 00 . 000 0 0
3.0625 5.0000 1.1875 33500 8690 6230 49800
. . 50 0. 000 0. . 5 00 00 . 000 5AS A
3.0625 5.2500 1.1875 32100 8330 6340 48600
. 5. . 50 000 0. . 00 00 . 0000 5 5 5 5
3.0625 5.3438 1.7500 53200 13800 9600 85400
. .5 5 .0 000 0. . 00 5 00 . 05000 H 5 H 5
3.0625 5.3750 1.8125 56000 14500 11800 91000
. . 00 .0 000 0. . 00 5 00 . 05000 H 5 H 5 0
3.0625 5.5000 1.8125 56000 14500 11800 91000
. . .500 5000 0.5 . 00 00 . 00000 H H 0
3.0625 6.4951 1.9488 73200 19000 16600 90000
. 5 0.000 . 50 000 0. .55 5 00 00 .5 000 HM5 5 HM5 5
3.1250 5.5118 1.7500 50200 13000 8600 71400
. 5 . . 50 000 0. .55 5 00 00 .5 000 HM5 5 HM5 5
3.1250 5.5960 1.7500 50200 13000 8600 71400
. 5 .050 . 5 000 0. . 5 00 500 . 5000 5
3.1250 5.7500 1.6250 51400 13300 9330 75300
. 5 . 5. 00000 0. . 5 00 00 . 000 5 5A 5 XE
3.1250 5.8125 1.4062 45000 11700 8820 71600
. 5 50.000 5. 00000 0. . 5 00 00 . 000 5 5A 5 X
3.1250 5.9055 1.4170 45000 11700 8820 71600
. 5 50.0 . 50 000 0. . 00 500 . 0 000 50
3.1250 5.9090 1.7500 66100 17100 9550 93800
. 5 5 . 00 5. 00000 0. . 5 00 00 . 000 5 5A 5 AS
3.1250 6.0000 1.4062 45000 11700 8820 71600
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
55. 00 . - . .5 .0 0 .0 . 5 .0 .0 . 0 0. 0 .5 0. 0 5.
2.1693 1.6875 -0.52 0.14 3.70 3.98 0.13 6.06 5.55 0.16 0.03
11.85
. 0 . 00 - . .5 .0 5.0 . 50.0 .0 . 0 0. 0 . 0.0 5 5.
1.9000 1.5000 -0.47 0.14 3.46 3.74 0.13 5.91 5.79 0.13 0.04
11.38
5 . . 5 - .5 0. .0 0.0 . 55.0 .0 5. 0 . 0 . 0.0 5.
2.2190 1.6250 -0.73 0.03 3.50 3.54 0.13 6.10 5.87 0.20 0.06
12.75
5 . . 5 - .5 . .0 0 .0 . 55.0 .0 5. 0 . 0 . 0.0 5.
2.2190 1.6250 -0.73 0.25 3.50 3.98 0.13 6.10 5.87 0.20 0.06
12.71
.0 . 50 . .5 .5 05.0 . .0 .0 .00 . 0 . 0. 05 5.
1.8125 1.2500 0.17 0.14 3.87 4.13 0.13 6.46 5.79 0.35 0.15
11.26
50. 00 . 50 . .5 .5 05.0 . .0 .0 . 0 . 0 . 0. 05 5. 5
2.0000 1.2500 0.05 0.14 3.87 4.13 0.13 6.46 5.79 0.48 0.09
11.80
.0 . 5 . .5 .5 05.0 . .0 .0 .00 . 0 . 0. 05 5.
1.8125 1.3750 0.17 0.14 3.87 4.13 0.13 6.46 5.83 0.35 0.15
12.80
50. 00 . 5 . .5 .5 05.0 . .0 .0 . 0 . 0 . 0. 05 .05
2.0000 1.3750 0.05 0.14 3.87 4.13 0.13 6.46 5.83 0.48 0.09
13.34
5 . 5. 0 0.5 .5 00.0 0.0 . 0.0 5 .0 .50 . 0 0. 0. .55
2.0938 1.4063 0.02 0.14 3.94 4.33 0.13 6.69 5.98 0.38 0.11
14.45
5 .5 .0 - 5.0 .5 5.0 0 .0 . .0 .0 .50 . 0 . 0. 0 .
2.2650 1.8125 -0.59 0.14 3.74 3.98 0.13 7.05 6.73 0.10 0.13
19.55
5. 00 .050 . .5 5.0 .0 . .0 05.0 .50 . 0 . . 0. 0.
1.0000 0.7500 0.09 0.14 3.35 3.58 0.13 4.45 4.13 0.10 0.06
2.00
.0 .000 .5 .5 .0 0.0 . 5.0 0.0 . 0 . 0 . 0. 0 0.
0.9060 0.6299 0.06 0.14 3.31 3.54 0.09 4.53 4.33 0.10 0.08
1.84
5. 00 . 5 . .5 5.0 .0 . .0 0 .0 .50 . 0 . . 0. .
1.0000 1.0313 0.09 0.14 3.35 3.58 0.13 4.56 4.21 0.10 0.06
2.45
.0 . .5 .5 .0 0.0 .0 .0 0.0 . 0 . 0 . 0. 0 0.
0.9060 0.6875 0.06 0.14 3.31 3.54 0.08 4.57 4.33 0.10 0.08
2.00
.0 . .5 . .0 .0 .0 .0 0.0 . 0 . 0 . 0. 0 0.
0.9060 0.6875 0.06 0.25 3.31 3.78 0.08 4.57 4.33 0.10 0.08
1.94
.000 . 5 - . .5 5.0 .0 . .0 .0 . 0 0. 0 . . 0. .
1.2205 0.8750 -0.11 0.14 3.35 3.58 0.13 4.76 4.49 0.13 0.03
3.04
. . 5 -0. .5 .0 .0 . .0 0.0 .50 . 0 05 . 0. 5 .
1.1720 0.8750 -0.03 0.14 3.43 3.66 0.13 5.04 4.72 0.10 0.08
3.61
. 00 . 5 - . .5 .0 .0 . 0.0 .0 5. 0 . 0 5 . 0.0 0 .
1.8150 1.3750 -0.46 0.14 3.50 3.78 0.13 5.12 4.69 0.21 0.06
5.78
.0 .5 - . .5 .0 .0 . .0 .0 . 0 .00 . 0.0 .
1.8125 1.4375 -0.34 0.14 3.46 3.90 0.13 5.20 4.65 0.16 0.08
6.26
.0 .5 - . .5 .0 .0 . .0 0.0 . 0 .00 . 0.0 .0
1.8125 1.4375 -0.34 0.14 3.46 3.90 0.13 5.24 4.72 0.16 0.08
6.67
. . 5 - . .5 .5 0 .0 . 5 .5 .0 . 0 5. 0 . 0.0 5 .
1.8208 1.4272 -0.25 0.14 3.64 4.02 0.13 6.08 5.67 0.18 0.23
10.66
. 00 . - 0. .5 .5 5.0 . .0 .0 .00 - . 0 . 0.0 .
1.8150 1.3125 -0.43 0.14 3.52 3.74 0.13 5.24 4.84 0.24 -0.05
5.83
. 00 . - 0. .5 .5 5.0 . .0 .0 .00 - . 0 . 0.0 .
1.8150 1.3125 -0.43 0.14 3.52 3.74 0.13 5.24 4.88 0.24 -0.05
6.10
. 5 . 50 - . .5 0.0 .0 . .0 .0 .50 .00 . 0.0 .
1.6250 1.2500 -0.31 0.14 3.54 3.78 0.13 5.47 5.16 0.18 0.08
6.31
. . - .5 .5 .0 .0 0. .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.0312 -0.10 0.14 3.58 3.86 0.03 5.59 5.31 0.16 0.07
5.97
. .000 - .5 .5 .0 .0 .0 .0 .0 . 0 . 0 5 . 0. .
1.4300 1.0630 -0.10 0.14 3.58 3.86 0.12 5.59 5.28 0.16 0.07
6.22
. .5 - . .5 0.0 .0 . .0 .0 . 0 . 0 0 . 0.0 .50
1.8375 1.4375 -0.47 0.14 3.54 3.78 0.13 5.59 5.28 0.07 0.05
7.72
. . - .5 .5 .0 .0 0. .0 .0 . 0 . 0 5 . 0. .
1.4300 1.0312 -0.10 0.14 3.58 3.86 0.03 5.67 5.39 0.16 0.07
6.48
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 5 5 . 00 . 00000 0. . 5 00 00 . 000 5 5A 5 A
3.1250 6.0000 1.5625 45000 11700 8820 71600
. 5 5 . 00 . 5 000 0. . 5 00 500 . 5000 5
3.1250 6.0000 1.6250 51400 13300 9330 75300
. 5 . 5 . 5 0 000 0. . 500 5 00 . 000 5 A 5
3.1250 6.3750 1.8750 68100 17700 10300 99200
. 5 0.500 5 . 50 000 0. . 000 00 . 000 HH HH 0
3.1250 7.5000 2.2500 111000 28800 16500 156000
. 5 . 5 0.000 5 000 0. . 0 5 00 00 . 000 HM HM 0
3.1486 5.7864 1.5748 57000 14800 8420 87300
. 5 5 . 00 0.000 5 000 0. . 0 5 00 00 . 000 HM HM 5
3.1486 6.0000 1.5748 57000 14800 8420 87300
. 5 . .5 000 0. 0 . 00 00 . 5 000 5 5
3.1490 5.5115 1.4375 43000 11200 7720 65400
. 5 . .5 000 0. 0 . 00 00 . 5 000 5 X 5
3.1490 5.5115 1.4375 43000 11200 7720 65400
. 5 . 5. 00000 0. . 5 00 00 . 000 5 0 5 XE
3.1490 5.8125 1.4062 45000 11700 8820 71600
. 5 5 . 00 . 00000 0. . 5 00 00 . 000 5 0 5 A
3.1490 6.0000 1.5625 45000 11700 8820 71600
0.000 5.000 .000 05000 0. 5 . 00 000 . 000 JP 0 JP 0 0
3.1496 4.9213 0.9449 23600 6110 4730 31800
0.000 0.000 5.000 000 0. .5 00 00 .50 000 JM5 5 JM5 5 0
3.1496 5.1181 1.3780 41300 10700 7130 63500
0.000 .000 0. 50 5 000 0. . 00 00 . 000 XUB- 0 YFA 0
3.1496 5.5512 1.1909 34000 8830 6350 42000
0.000 50.000 . 55 000 0. . 00 500 . 0 000
3.1496 5.9055 1.7502 66100 17100 9550 93800
0.000 50.0 . 50 000 0. . 00 500 . 0 000
3.1496 5.9090 1.7500 66100 17100 9550 93800
0.000 0.000 5.000 000 0. 0. 00 00 0. 000 JW 0 JW 0 0
3.1496 6.2992 1.7717 54900 14200 21100 76100
0.000 00.000 5 . 000 0. 0. 5 500 0 000 0. 5 000
3.1496 7.8740 2.0772 84600 21900 23700 117000
0. . 50 0. 000 0. . 5 00 00 . 000 A
3.1875 5.2500 1.1875 32100 8330 6340 48600
0. . 50 . 000 0. 0 . 00 0000 . 000 0
3.1875 5.2500 1.3125 37600 9750 6750 58900
0. . 50 . 0 000 0. 0 . 5 00 00 . 5 5 000 HM5 HM5 0
3.1875 5.2500 1.5625 45400 11800 8110 79300
0. . 50 . 0 000 0. 0 . 5 00 00 . 5 5 000 HM5 HM5 0A
3.1875 5.2500 1.5625 45400 11800 8110 79300
0. .5 5 0. 000 0. . 5 00 00 . 000
3.1875 5.3750 1.1875 32100 8330 6340 48600
0. . .5 000 0. 0 . 00 00 . 5 000 5 5
3.1875 5.5115 1.4375 43000 11200 7720 65400
0. .050 . 00 000 0. . 5 00 500 . 5000 5
3.1875 5.7500 1.5000 51400 13300 9330 75300
0. 50.0 . 50 000 0. . 00 500 . 0 000 0
3.1875 5.9090 1.7500 66100 17100 9550 93800
0. . 5 5 . 5 000 0. 0 .00 00 50 00 . 5 5 000
3.1875 6.6250 2.1250 85100 22100 11300 117000
.550 . 00 5.0 55 00 0. . 00 0 . 000 LL LL 0
3.2500 4.5000 0.5938 12400 3230 1710 19600
.550 5. 0. 500 0. . 5 00 00 . 0 000 L L 0
3.2500 4.5625 0.8125 18800 4870 2570 33100
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 0. - .5 .5 .0 .0 . .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.1875 -0.10 0.14 3.58 3.86 0.13 5.67 5.31 0.16 0.07
6.85
. 5 . 50 - . .5 0.0 .0 . .0 .0 .50 .00 . 0.0 .
1.6250 1.2500 -0.31 0.14 3.54 3.78 0.13 5.55 5.28 0.18 0.08
7.13
. 0 . 00 - . .0 .0 0 .0 . 50.0 .0 . 0 0. 0 . 0.0 5 .
1.9000 1.5000 -0.47 0.31 3.58 4.17 0.13 5.91 5.67 0.13 0.04
9.90
5 .5 .0 - 5.0 .5 .0 0 .0 . .0 .0 .50 . 0 . 0. 0 .
2.2650 1.8125 -0.59 0.14 3.82 4.06 0.13 7.05 6.73 0.10 0.13
19.16
0.000 .500 - . .0 .0 0 .0 .5 .0 .0 . 0 . 0 . 0.0 . 5
1.5748 1.2795 -0.34 0.28 3.58 4.09 0.14 5.55 5.24 0.06 0.12
6.51
0.000 .500 - . .0 .0 0 .0 . .0 5.0 . 0 . 0 . 0.0 .
1.5748 1.2795 -0.34 0.28 3.58 4.09 0.13 5.63 5.31 0.06 0.12
7.23
.0 .5 5 -5. .5 .0 5.0 . .0 5.0 . 0 . 0 0. 5 .
1.4212 1.1250 -0.21 0.14 3.50 3.74 0.13 5.24 4.92 0.14 0.07
4.91
.0 .5 5 -5. .0 .0 0 .0 . .0 5.0 . 0 . 0 0. 5 .
1.4212 1.1250 -0.21 0.31 3.50 4.09 0.13 5.24 4.92 0.14 0.07
4.79
. . - .5 .5 .0 .0 0. .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.0312 -0.10 0.14 3.58 3.86 0.03 5.59 5.31 0.16 0.07
5.92
. 0. - .5 .5 .0 .0 . .0 5.0 . 0 . 0 5 . 0. .0
1.4300 1.1875 -0.10 0.14 3.58 3.86 0.13 5.67 5.31 0.16 0.07
6.80
.500 .500 . .0 .0 .0 .0 0.0 5.0 . 0 . 0 . . 0. 0 5 0. 5
0.8858 0.6890 0.09 0.08 3.39 3.50 0.08 4.72 4.53 0.08 0.14
2.10
.000 .500 -5. .0 .0 .0 .5 5.0 .0 . 0 . 0 . 0.0 .
1.3386 1.1220 -0.20 0.12 3.46 3.70 0.10 4.92 4.61 0.06 0.11
3.77
.000 .000 - .0 0.5 0.0 0.0 .0 .0 .0 . 0 .50 0. 5. 0.0 . 0
1.1024 0.8661 -0.08 0.02 3.54 3.54 0.08 5.24 5.04 0.15 0.14
3.98
. 5.000 - . .0 0.0 .0 . .0 .0 . 0 . 0 0 . 0.0 .
1.8375 1.3780 -0.47 0.12 3.54 3.78 0.13 5.59 5.28 0.07 0.05
7.57
. .5 - . .0 0.0 .0 . .0 .0 . 0 . 0 0 . 0.0 .
1.8375 1.4375 -0.47 0.12 3.54 3.78 0.13 5.59 5.28 0.07 0.05
7.67
.000 .000 . .0 .0 0 .0 .0 5 .0 .0 . 0 . 0 . 0. 0 .0
1.6142 1.2205 0.38 0.12 3.67 4.25 0.12 5.98 5.28 0.28 0.19
8.90
. . 5 . .5 05.0 .0 . .0 .0 . 0 5. 0 0 . 0. . 5
1.9375 1.3750 0.05 0.14 4.13 4.37 0.13 7.40 6.85 0.34 0.21
17.52
. . 5 -0. .5 .0 5.0 . .0 0.0 .50 . 0 05 . 0. 5 .5
1.1720 0.8750 -0.03 0.14 3.50 3.74 0.13 5.04 4.72 0.10 0.08
3.40
. . 5 - . .5 .0 5.0 . .0 .0 . 0 . 0 . 0. .
1.3125 1.0313 -0.17 0.14 3.50 3.74 0.13 5.04 4.69 0.09 0.09
3.84
. .5 5 - . .5 .0 .0 . .0 .0 . 0 .50 5 0.0 55 .
1.5625 1.2813 -0.29 0.14 3.58 3.86 0.13 5.04 4.65 0.07 0.10
4.90
. .5 5 - . .5 .0 .0 0. .0 0.0 . 0 .50 5 0.0 55 .
1.5625 1.2813 -0.29 0.14 3.58 3.86 0.03 5.04 4.72 0.07 0.10
4.93
. . 5 -0. .5 .0 5.0 . 0.0 .0 .50 . 0 05 . 0. 5 .
1.1720 0.8750 -0.03 0.14 3.50 3.74 0.13 5.12 4.80 0.10 0.08
3.66
.0 .5 5 -5. .5 0.0 .0 . .0 5.0 . 0 . 0 0. 5 .
1.4212 1.1250 -0.21 0.14 3.54 3.78 0.13 5.24 4.92 0.14 0.07
4.83
. 00 . 50 - . .5 .0 .0 . .0 .0 . 0 .00 . 0.0 .
1.5000 1.2500 -0.19 0.14 3.58 3.86 0.13 5.47 5.16 0.05 0.08
5.90
. .5 - . 5.0 .0 0 .0 . .0 .0 . 0 . 0 0 . 0.0 .
1.8375 1.4375 -0.47 0.20 3.58 3.98 0.13 5.59 5.28 0.07 0.05
7.53
5 . . 5 - .5 0. .0 .0 . 55.0 .0 5. 0 . 0 . 0.0 5.5
2.2190 1.6250 -0.73 0.03 3.66 3.70 0.13 6.10 5.87 0.20 0.06
12.18
5.0 . .5 .5 .0 0.0 .5 0.0 0 .0 0. 0 . 0 . . 0.0 0.
0.5938 0.4375 0.06 0.06 3.43 3.54 0.06 4.33 4.25 0.01 0.08
0.96
. . 0 - . .5 .0 0.0 .5 .0 0 .0 0. 0 . 0 . . 0. 0 0.
0.8438 0.6563 -0.05 0.06 3.46 3.54 0.06 4.37 4.25 0.02 0.05
1.46
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
.550 5. 5. 00 0 000 0. . 00 0000 . 0 000 0
3.2500 4.9375 1.0000 24400 6320 4500 39900
.550 . 50 0. 000 0. . 5 00 00 . 000 5 A
3.2500 5.2500 1.1875 32100 8330 6340 48600
.550 . 50 . 000 0. 0 . 00 0000 . 000 5 0
3.2500 5.2500 1.3125 37600 9750 6750 58900
.550 . 50 . 000 0. 0 . 00 0000 . 000 0
3.2500 5.2500 1.3125 37600 9750 6750 58900
.550 . 50 . 000 0. 0 . 00 0000 . 000 0
3.2500 5.2500 1.3125 37600 9750 6750 58900
.550 . 50 . 0 000 0. 0 . 5 00 00 . 5 5 000 HM5 HM5 0
3.2500 5.2500 1.5625 45400 11800 8110 79300
.550 . 50 . 0 000 0. 0 . 5 00 00 . 5 5 000 HM5 A HM5 0
3.2500 5.2500 1.5625 45400 11800 8110 79300
.550 . 50 . 0 000 0. 0 . 5 00 00 . 5 5 000 HM5 C HM5 0
3.2500 5.2500 1.5625 45400 11800 8110 79300
.550 .5 5 0. 000 0. . 5 00 00 . 000 5
3.2500 5.3750 1.1875 32100 8330 6340 48600
.550 . 00 .5 000 0. 0 . 00 00 . 5 000 5 0 5 X
3.2500 5.5000 1.4375 43000 11200 7720 65400
.550 . 00 .5 000 0. 0 . 00 00 . 5 000 5 5 X
3.2500 5.5000 1.4375 43000 11200 7720 65400
.550 . .5 000 0. 0 . 00 00 . 5 000 5 0 5
3.2500 5.5115 1.4375 43000 11200 7720 65400
.550 . .5 000 0. 0 . 00 00 . 5 000 5 0 5
3.2500 5.5115 1.4375 43000 11200 7720 65400
.550 . .5 000 0. 0 . 00 00 . 5 000 5 5
3.2500 5.5115 1.4375 43000 11200 7720 65400
.550 . .5 000 0. 0 . 00 0000 . 000 5
3.2500 5.5115 1.4375 37600 9750 6750 58900
.550 . .5 000 0. 0 . 00 0000 . 000
3.2500 5.5115 1.4375 37600 9750 6750 58900
.550 . .5 000 0. 0 . 00 00 . 5 000 5 0X 5
3.2500 5.5115 1.4375 43000 11200 7720 65400
.550 . . 000 0. . 00 00 . 5 000 HM 0 5 HM 0 0
3.2500 5.5960 1.6875 54300 14100 10400 89700
.550 .050 . 5 000 0. . 5 00 500 . 5000 5
3.2500 5.7500 1.6250 51400 13300 9330 75300
.550 .050 . 5 000 0. . 5 00 500 . 5000 A 5
3.2500 5.7500 1.6250 51400 13300 9330 75300
.550 . 5. 00000 0. . 5 00 00 . 000 5 5 5 XE
3.2500 5.8125 1.4062 45000 11700 8820 71600
.550 . 5. 00000 0. . 5 00 00 . 000 5 5 5 XS
3.2500 5.8125 1.4062 45000 11700 8820 71600
.550 50.000 5. 00000 0. . 5 00 00 . 000 5 5 5 X
3.2500 5.9055 1.4170 45000 11700 8820 71600
.550 50.0 . 50 000 0. . 00 500 . 0 000 A
3.2500 5.9090 1.7500 66100 17100 9550 93800
.550 50.0 . 50 000 0. . 00 500 . 0 000 50A
3.2500 5.9090 1.7500 66100 17100 9550 93800
.550 5 . 00 5. 00000 0. . 5 00 00 . 000 5 5 5 AS
3.2500 6.0000 1.4062 45000 11700 8820 71600
.550 5 . 00 . 00000 0. . 5 00 00 . 000 5 5 5 A
3.2500 6.0000 1.5625 45000 11700 8820 71600
.550 5 . 00 . 5 000 0. . 5 00 500 . 5000 5
3.2500 6.0000 1.6250 51400 13300 9330 75300
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
5. 00 . 5 0.5 .5 .0 .0 .5 0.0 5.0 .50 . 0 . . 0. .05
1.0000 0.7813 0.02 0.14 3.50 3.78 0.06 4.72 4.53 0.06 0.07
2.33
. . 5 -0. .5 0.0 .0 . .0 0.0 .50 . 0 05 . 0. 5 .50
1.1720 0.8750 -0.03 0.14 3.54 3.82 0.13 5.04 4.72 0.10 0.08
3.30
. . 5 - . 0. 0.0 .0 . .0 .0 . 0 . 0 . 0. . 0
1.3125 1.0313 -0.17 0.03 3.54 3.58 0.13 5.04 4.69 0.09 0.09
3.75
. . 5 - . .5 0.0 .0 . .0 .0 . 0 . 0 . 0. .
1.3125 1.0313 -0.17 0.14 3.54 3.82 0.13 5.04 4.69 0.09 0.09
3.72
. . 5 - . . 0.0 0 .0 . .0 .0 . 0 . 0 . 0. . 5
1.3125 1.0313 -0.17 0.27 3.54 4.06 0.13 5.04 4.69 0.09 0.09
3.65
. .5 5 - . . .0 0 .0 . .0 .0 . 0 .50 5 0.0 55 .
1.5625 1.2813 -0.29 0.27 3.62 4.17 0.13 5.04 4.65 0.07 0.10
4.72
. .5 5 - . .0 .0 05.0 . .0 .0 . 0 .50 5 0.0 55 . 0
1.5625 1.2813 -0.29 0.24 3.62 4.13 0.13 5.04 4.65 0.07 0.10
4.62
. .5 5 - . .5 .0 .0 . .0 .0 . 0 .50 5 0.0 55 . 5
1.5625 1.2813 -0.29 0.14 3.62 3.90 0.13 5.04 4.65 0.07 0.10
4.74
. . 5 -0. .5 0.0 .0 . 0.0 .0 .50 . 0 05 . 0. 5 .
1.1720 0.8750 -0.03 0.14 3.54 3.82 0.13 5.12 4.80 0.10 0.08
3.55
.0 .5 5 -5. .5 .0 .0 . .0 5.0 . 0 . 0 0. 5 .
1.4212 1.1250 -0.21 0.14 3.58 3.86 0.13 5.24 4.92 0.14 0.07
4.65
.0 .5 5 -5. . .0 0 .0 . .0 5.0 . 0 . 0 0. 5 .0
1.4212 1.1250 -0.21 0.27 3.58 4.09 0.13 5.24 4.92 0.14 0.07
4.56
.0 .5 5 -5. .5 .0 .0 . .0 5.0 . 0 . 0 0. 5 .
1.4212 1.1250 -0.21 0.14 3.58 3.86 0.13 5.24 4.92 0.14 0.07
4.71
.0 .5 5 -5. .5 .0 .0 0.5 .0 .0 . 0 . 0 0. 5 .
1.4212 1.1250 -0.21 0.14 3.58 3.86 0.02 5.24 5.04 0.14 0.07
4.72
.0 .5 5 -5. . .0 0 .0 . .0 5.0 . 0 . 0 0. 5 . 0
1.4212 1.1250 -0.21 0.27 3.58 4.09 0.13 5.24 4.92 0.14 0.07
4.62
. . 0 - . 0. 0.0 .0 . 0.0 .0 . 0 . 0 . 0. .
1.3125 1.1563 -0.17 0.03 3.54 3.58 0.13 5.12 4.80 0.09 0.09
4.70
. . 0 - . .5 0.0 .0 . 0.0 .0 . 0 . 0 . 0. .
1.3125 1.1563 -0.17 0.14 3.54 3.82 0.13 5.12 4.80 0.09 0.09
4.67
.0 .5 5 -5. . .0 00.0 . .0 5.0 . 0 . 0 0. 5 .
1.4212 1.1250 -0.21 0.19 3.62 3.94 0.13 5.24 4.92 0.14 0.07
4.68
. . - . .5 5.0 0 .0 . .0 5.0 . 0 . 0 . 0.0 .
1.6875 1.3438 -0.29 0.14 3.74 3.98 0.13 5.39 4.92 0.13 0.09
6.11
. 5 . 50 - . .5 .0 .0 . .0 .0 .50 .00 . 0.0 .
1.6250 1.2500 -0.31 0.14 3.62 3.90 0.13 5.47 5.16 0.18 0.08
6.02
. 5 . 50 - . . .0 05.0 . .0 .0 .50 .00 . 0.0 . 0
1.6250 1.2500 -0.31 0.27 3.62 4.13 0.13 5.47 5.16 0.18 0.08
5.94
. . - .5 .5 .0 00.0 0. .0 5.0 . 0 . 0 5 . 0. .5
1.4300 1.0312 -0.10 0.14 3.66 3.94 0.03 5.59 5.31 0.16 0.07
5.71
. . - .5 .5 .0 00.0 . .0 .0 . 0 . 0 5 . 0. .5
1.4300 1.0312 -0.10 0.14 3.66 3.94 0.13 5.59 5.24 0.16 0.07
5.67
. .000 - .5 .5 .0 00.0 .0 .0 .0 . 0 . 0 5 . 0. .
1.4300 1.0630 -0.10 0.14 3.66 3.94 0.12 5.59 5.28 0.16 0.07
5.97
. .5 - . .5 .0 .0 . .0 .0 . 0 . 0 0 . 0.0 . 5
1.8375 1.4375 -0.47 0.14 3.66 3.90 0.13 5.59 5.28 0.07 0.05
7.40
. .5 - . .5 .0 0 .0 . .0 .0 . 0 . 0 0 . 0.0 .
1.8375 1.4375 -0.47 0.26 3.66 4.17 0.13 5.59 5.28 0.07 0.05
7.32
. . - .5 .5 .0 00.0 0. .0 .0 . 0 . 0 5 . 0. .
1.4300 1.0312 -0.10 0.14 3.66 3.94 0.03 5.67 5.39 0.16 0.07
6.23
. 0. - .5 .5 .0 00.0 . .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.1875 -0.10 0.14 3.66 3.94 0.13 5.67 5.31 0.16 0.07
6.59
. 5 . 50 - . .5 .0 .0 . .0 .0 .50 .00 . 0.0 . 0
1.6250 1.2500 -0.31 0.14 3.62 3.90 0.13 5.55 5.28 0.18 0.08
6.84
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
.550 5 . 5 . 5 0 000 0. . 500 5 00 . 000 5 5 A
3.2500 6.2990 1.8750 68100 17700 10300 99200
.550 . 5 . 5 0 000 0. . 500 5 00 . 000 5 5
3.2500 6.3750 1.8750 68100 17700 10300 99200
.550 . 5 5 . 5 000 0. 0 .50 000 000 . 5 000 55 C 5 5
3.2500 6.3750 2.1250 77200 20000 13700 118000
.550 . 5 . 5 0 000 0. . 500 5 00 . 000 5 5
3.2500 6.6250 1.8750 68100 17700 10300 99200
.550 . 5 5 . 5 000 0. 0 .00 00 50 00 . 5 5 000
3.2500 6.6250 2.1250 85100 22100 11300 117000
.550 . 5 5 . 5 000 0. 0 .00 00 50 00 . 5 5 000
3.2500 6.6250 2.1250 85100 22100 11300 117000
.550 0. 5 5 . 5 50000 0. 0. 0 00 000 0. 0 5 000 H H 0
3.2500 7.1250 2.1250 78700 20400 25600 103000
. 5 5. 5. 00 0 000 0. . 00 0000 . 0 000 0
3.2813 4.9375 1.0000 24400 6320 4500 39900
. 5 5. 5. 00 0 000 0. . 00 0000 . 0 000 0 0
3.2813 4.9375 1.0000 24400 6320 4500 39900
. 5 5. 5. 00 0 000 0. . 00 0000 . 0 000 0
3.2813 4.9375 1.0000 24400 6320 4500 39900
. 5 . 50 . 000 0. 0 . 00 0000 . 000 0
3.2813 5.2500 1.3125 37600 9750 6750 58900
.000 0.000 .000 0000 0. . 000 00 . 000 XUA 0 X Y 0 X
3.3071 5.5118 1.2598 38200 9890 7160 59400
. . 50 0. 000 0. . 5 00 00 . 000 A
3.3125 5.2500 1.1875 32100 8330 6340 48600
. .5 5 0. 000 0. . 5 00 00 . 000
3.3125 5.3750 1.1875 32100 8330 6340 48600
. 5 . 00 . 5 000 0. . 5 00 500 . 5000 5
3.3125 6.0000 1.6250 51400 13300 9330 75300
. . 50 . 000 0. 0. 500 00 0. 5 000 H
3.3125 6.7500 1.9375 63700 16500 21600 78800
. . 00 5 . 000 0. 0. 500 00 0. 5 000 H 0
3.3125 7.0000 2.0625 63700 16500 21600 78800
. 5 5. 5. 00 0 000 0. . 00 0000 . 0 000 5 0
3.3455 4.9375 1.0000 24400 6320 4500 39900
5.000 0.000 .000 5 000 0. . 000 500 . 5000 XAA 0 X Y 0 X
3.3465 5.1181 1.1417 33800 8770 6640 52900
5.000 0.000 0.000 000 0. . 5 00 00 . 5000 JM JM 0
3.3465 5.1181 1.1811 33600 8700 6620 55100
5.000 0.000 0.000 000 0. . 5 00 00 . 5000 JM JM 0
3.3465 5.1181 1.1811 33600 8700 6620 55100
5.000 0.000 .000 0000 0. . 5 000 00 . 000 JHM5 JHM5 0
3.3465 5.5118 1.5354 49500 12800 8940 76300
5.000 .050 . 5 000 0. . 5 00 500 . 5000 5X 5
3.3465 5.7500 1.6250 51400 13300 9330 75300
5.000 50.000 . 5 000 0. . 5 00 500 . 5000 5X 5 X
3.3465 5.9055 1.6250 51400 13300 9330 75300
5.000 50.000 .000 0 000 0. . 0 00 5 00 . 000 JH JH 0
3.3465 5.9055 1.8110 69100 17900 10200 100000
5.000 . 5 . 000 0. 0. 00 5000 0. 000 0 0
3.3465 7.4375 2.0983 67300 17400 25900 88100
5.000 00.000 5 . 000 0. 0. 5 500 0 000 0. 5 000 5
3.3465 7.8740 2.0772 84600 21900 23700 117000
5.0 50.000 . 55 000 0. . 00 500 . 0 000
3.3475 5.9055 1.7502 66100 17100 9550 93800
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 0 . 00 - . .5 .0 00.0 0. 50.0 .0 . 0 0. 0 . 0.0 5 .
1.9000 1.5000 -0.47 0.14 3.70 3.94 0.03 5.91 5.75 0.13 0.04
9.40
. 0 . 00 - . .5 .0 00.0 . 50.0 .0 . 0 0. 0 . 0.0 5 .
1.9000 1.5000 -0.47 0.14 3.70 3.94 0.13 5.91 5.67 0.13 0.04
9.68
55. 00 . - . .5 .0 0 .0 . 5 .0 .0 . 0 0. 0 .5 0. 0 5.0
2.1693 1.6875 -0.52 0.14 3.86 4.09 0.13 6.06 5.55 0.16 0.03
11.09
. 0 . 00 - . .5 .0 00.0 . 50.0 .0 . 0 0. 0 . 0.0 5 .
1.9000 1.5000 -0.47 0.14 3.70 3.94 0.13 5.91 5.79 0.13 0.04
10.72
5 . . 5 - .5 0. .0 5.0 . 55.0 .0 5. 0 . 0 . 0.0 5.
2.2190 1.6250 -0.73 0.03 3.70 3.74 0.13 6.10 5.87 0.20 0.06
11.98
5 . . 5 - .5 .5 .0 0 .0 . 55.0 .0 5. 0 . 0 . 0.0 5.
2.2190 1.6250 -0.73 0.14 3.70 3.98 0.13 6.10 5.87 0.20 0.06
11.95
5 . 5. 0 0.5 . 00.0 .0 . 0.0 5 .0 .50 . 0 0. 0. .
2.0938 1.4063 0.02 0.13 3.94 4.49 0.13 6.69 5.98 0.38 0.11
13.72
5. 00 . 5 0.5 0. 0.0 0.0 .5 0.0 5.0 .50 . 0 . . 0. .05
1.0000 0.7813 0.02 0.03 3.54 3.54 0.06 4.72 4.53 0.06 0.07
2.31
5. 00 . 5 0.5 .5 0.0 .0 .5 0.0 5.0 . 0 . 0 . . 0. .0
1.0000 0.7813 0.02 0.14 3.54 3.78 0.06 4.72 4.53 0.06 0.07
2.28
5. 00 . 5 0.5 . 0.0 0 .0 .5 0.0 5.0 .50 . 0 . . 0. .00
1.0000 0.7813 0.02 0.25 3.54 4.02 0.06 4.72 4.53 0.06 0.07
2.21
. . 5 - . .5 .0 .0 . .0 .0 . 0 . 0 . 0. .
1.3125 1.0313 -0.17 0.14 3.58 3.82 0.13 5.04 4.69 0.09 0.09
3.66
.000 .000 - .0 0.5 .0 .0 .5 .0 .0 . 0 . 0 . 0. .
1.2598 0.9449 -0.08 0.02 3.70 3.70 0.06 5.28 5.04 0.13 0.09
4.32
. . 5 -0. .5 .0 .0 . .0 0.0 .50 . 0 05 . 0. 5 . 5
1.1720 0.8750 -0.03 0.14 3.58 3.86 0.13 5.04 4.72 0.10 0.08
3.19
. . 5 -0. .5 .0 .0 . 0.0 .0 .50 . 0 05 . 0. 5 .5
1.1720 0.8750 -0.03 0.14 3.58 3.86 0.13 5.12 4.80 0.10 0.08
3.45
. 5 . 50 - . .5 .0 00.0 . .0 .0 .50 .00 . 0.0 .0
1.6250 1.2500 -0.31 0.14 3.70 3.94 0.13 5.55 5.28 0.18 0.08
6.69
.0 . 50 . .5 .5 .0 . .0 .0 .00 . 0 . 0. 05 . 0
1.8125 1.2500 0.17 0.14 3.87 4.37 0.13 6.46 5.79 0.35 0.15
10.36
.0 . 5 . .5 .5 .0 . .0 .0 .00 . 0 . 0. 05 5. 0
1.8125 1.3750 0.17 0.14 3.87 4.37 0.13 6.46 5.83 0.35 0.15
11.91
5. 00 . 5 0.5 5.0 .0 00.0 .5 0.0 5.0 .50 . 0 . . 0. 0.
1.0000 0.7813 0.02 0.20 3.58 3.94 0.06 4.72 4.53 0.06 0.07
2.15
.000 .000 -0.5 .5 .0 0 .0 .5 5.0 .0 . 0 . 0 0 . 0. 0 .
1.1417 0.8661 -0.02 0.26 3.62 4.17 0.06 4.92 4.69 0.08 0.11
2.89
.000 .000 -0. .0 .0 0 .0 .5 5.0 .0 . 0 .50 . 0. 0 .
1.1417 0.9449 -0.01 0.24 3.62 4.09 0.10 4.92 4.61 0.08 0.10
2.92
.000 .000 -0. .0 .0 .0 .5 5.0 .0 . 0 .50 . 0. 0 .
1.1417 0.9449 -0.01 0.12 3.62 3.86 0.10 4.92 4.61 0.08 0.10
3.00
.000 .500 -5. .0 .0 00.0 .5 .0 5.0 .50 . 0 5. 0.0 .
1.4961 1.2402 -0.23 0.12 3.70 3.94 0.10 5.28 4.92 0.06 0.14
4.99
. 5 . 50 - . .5 5.0 0 .0 . .0 .0 .50 .00 . 0.0 .
1.6250 1.2500 -0.31 0.14 3.74 3.98 0.13 5.47 5.16 0.18 0.08
5.79
. 5 . 50 - . .5 5.0 0 .0 .0 .0 .0 .50 .00 . 0.0 .
1.6250 1.2500 -0.31 0.14 3.74 3.98 0.12 5.55 5.24 0.18 0.08
6.30
.000 .000 - . .0 5.0 0 .0 .5 .0 .0 . 0 . 0 . 0.0 .
1.8110 1.4961 -0.47 0.12 3.74 3.98 0.10 5.59 5.28 0.04 0.14
7.37
5 . . 50 0. .5 .0 .0 . .5 .0 .50 -0. 0 50 . 0. 0 .5
2.0772 1.2500 0.41 0.14 4.41 4.57 0.13 7.06 6.34 0.53 -0.02
14.48
. . 5 . .5 0 .0 5.0 . .0 .0 . 0 5. 0 0 . 0. . 0
1.9375 1.3750 0.05 0.14 4.29 4.53 0.13 7.40 6.85 0.34 0.21
16.96
. 5.000 - . .5 5.0 0 .0 . .0 .0 . 0 . 0 0 . 0.0 . 0
1.8375 1.3780 -0.47 0.14 3.74 3.98 0.13 5.59 5.28 0.07 0.05
7.06
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
5.0 50.0 . 50 000 0. . 00 500 . 0 000
3.3475 5.9090 1.7500 66100 17100 9550 93800
5.0 50.0 . 50 000 0. . 00 500 . 0 000 -S
3.3475 5.9090 1.7500 66100 17100 9550 93800
5. 5 . 50 0. 000 0. . 5 00 00 . 000 A
3.3750 5.2500 1.1875 32100 8330 6340 48600
5. 5 .5 5 0. 000 0. . 5 00 00 . 000
3.3750 5.3750 1.1875 32100 8330 6340 48600
5. 5 .5 5 0. 000 0. . 5 00 00 . 000 A
3.3750 5.3750 1.1875 32100 8330 6340 48600
5. 5 . . 000 0. . 00 00 . 5 000 HM 0 HM 0 0
3.3750 5.5960 1.6875 54300 14100 10400 89700
5. 5 . . 000 0. . 00 00 . 5 000 HM 0 HM 0 0
3.3750 5.5960 1.6875 54300 14100 10400 89700
5. 5 .050 . 5 000 0. . 5 00 500 . 5000 5 5
3.3750 5.7500 1.6250 51400 13300 9330 75300
5. 5 .050 . 5 000 0. . 5 00 500 . 5000 5A 5
3.3750 5.7500 1.6250 51400 13300 9330 75300
5. 5 . 5. 00000 0. . 5 00 00 . 000 5 5 AX
3.3750 5.8200 1.4062 45000 11700 8820 71600
5. 5 50.000 5. 00000 0. . 5 00 00 . 000 5 JM
3.3750 5.9055 1.4160 45000 11700 8820 71600
5. 5 50.000 5. 00000 0. . 5 00 00 . 000 5 5 X
3.3750 5.9055 1.4170 45000 11700 8820 71600
5. 5 5 . 00 . 00000 0. . 5 00 00 . 000 5 5 A
3.3750 6.0000 1.5625 45000 11700 8820 71600
5. 5 5 . 00 . 5 000 0. . 5 00 500 . 5000 5 5
3.3750 6.0000 1.6250 51400 13300 9330 75300
5. 5 . 5 . 5 0 000 0. . 500 5 00 . 000 5 5
3.3750 6.3750 1.8750 68100 17700 10300 99200
5. 5 . 5 . 5 5000 0. . 500 5 00 . 000
3.3750 6.6250 1.6250 55100 14300 11500 86700
5. 5 . 5 5 . 5 000 0. 0 .00 00 50 00 . 5 5 000
3.3750 6.6250 2.1250 85100 22100 11300 117000
. . 5 0. 5 00 0. . 00 00 . 5 000 L L 0
3.4375 4.8750 0.8125 19300 5000 2820 35200
. 5 . 00 . 00000 0. . 5 00 00 . 000 5 -S 5 A
3.4375 6.0000 1.5625 45000 11700 8820 71600
. 0.500 5 . 50 000 0. . 000 00 . 000 HH HH 0
3.4375 7.5000 2.2500 111000 28800 16500 156000
. 0 . 0 .5 5 5 000 0. . 00 000 . 000 5
3.4630 5.8437 1.1250 33900 8790 7410 54300
. 0 . 5 . 50 5 000 0. . 00 000 . 000 5
3.4630 5.8750 1.2500 33900 8790 7410 54300
. 00 . 5.0 55 00 0. . 00 0 0 . 00 LL LL 0
3.5000 4.7812 0.5938 12400 3210 1820 20000
. 00 . 5 0. 5 00 0. . 00 00 . 5 000 L L 0
3.5000 4.8750 0.8125 19300 5000 2820 35200
. 00 .000 0. 5 00 0. . 00 00 . 5 000 L L
3.5000 5.0000 0.8125 19300 5000 2820 35200
. 00 . 0 .5 5 5 000 0. . 00 000 . 000 50 5
3.5000 5.8437 1.1250 33900 8790 7410 54300
. 00 . 5 . 50 5 000 0. . 00 000 . 000 50 5
3.5000 5.8750 1.2500 33900 8790 7410 54300
. 00 50.000 5. 00000 0. . 5 00 00 . 000 5 A JM
3.5000 5.9055 1.4160 45000 11700 8820 71600
B
Caption:
Caption:
C
D
B
d
a
B 0 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. .5 - . .5 5.0 0 .0 . .0 .0 . 0 . 0 0 . 0.0 . 5
1.8375 1.4375 -0.47 0.14 3.74 3.98 0.13 5.59 5.28 0.07 0.05
7.16
. .5 - . 5.0 5.0 0 .0 . .0 .0 . 0 . 0 0 . 0.0 .
1.8375 1.4375 -0.47 0.20 3.74 4.09 0.13 5.59 5.28 0.07 0.05
7.10
. . 5 -0. .5 .0 .0 . .0 0.0 .50 . 0 05 . 0. 5 . 0
1.1720 0.8750 -0.03 0.14 3.66 3.90 0.13 5.04 4.72 0.10 0.08
3.08
. . 5 -0. .5 .0 .0 . 0.0 .0 .50 . 0 05 . 0. 5 .5
1.1720 0.8750 -0.03 0.14 3.66 3.90 0.13 5.12 4.80 0.10 0.08
3.34
. . 5 -0. . .0 05.0 . 0.0 .0 .50 . 0 05 . 0. 5 .
1.1720 0.8750 -0.03 0.25 3.66 4.13 0.13 5.12 4.80 0.10 0.08
3.27
. . - . .5 5.0 .0 . .0 5.0 . 0 . 0 . 0.0 .
1.6875 1.3438 -0.29 0.06 3.75 3.90 0.13 5.39 4.92 0.13 0.09
5.82
. . - . . 5.0 0 .0 . .0 5.0 . 0 . 0 . 0.0 .
1.6875 1.3438 -0.29 0.19 3.75 4.17 0.13 5.39 4.92 0.13 0.09
5.77
. 5 . 50 - . .5 5.0 0 .0 . .0 .0 .50 .00 . 0.0 . 0
1.6250 1.2500 -0.31 0.14 3.74 4.02 0.13 5.47 5.16 0.18 0.08
5.72
. 5 . 50 - . . 5.0 0 .0 . .0 .0 .50 .00 . 0.0 .5
1.6250 1.2500 -0.31 0.25 3.74 4.21 0.13 5.47 5.16 0.18 0.08
5.66
. . - .5 .5 .0 0 .0 . .0 .0 . 0 . 0 5 . 0. .
1.4300 1.0312 -0.10 0.14 3.78 4.02 0.13 5.59 5.24 0.16 0.07
5.48
. .000 - .5 .5 .0 0 .0 .5 .0 5.0 . 0 . 0 5 . 0. .5
1.4300 1.0630 -0.10 0.14 3.78 4.02 0.10 5.63 5.31 0.16 0.07
5.72
. .000 - .5 .5 .0 0 .0 .0 .0 .0 . 0 . 0 5 . 0. .5
1.4300 1.0630 -0.10 0.14 3.78 4.02 0.12 5.59 5.28 0.16 0.07
5.70
. 0. - .5 .5 .0 0 .0 . .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.1875 -0.10 0.14 3.78 4.02 0.13 5.67 5.31 0.16 0.07
6.33
. 5 . 50 - . .5 5.0 0 .0 . .0 .0 .50 .00 . 0.0 .
1.6250 1.2500 -0.31 0.14 3.74 4.02 0.13 5.55 5.28 0.18 0.08
6.54
. 0 . 00 - . .5 .0 0 .0 . 50.0 .0 . 0 0. 0 . 0.0 5 .
1.9000 1.5000 -0.47 0.14 3.82 4.06 0.13 5.91 5.67 0.13 0.04
9.33
. 5 0. - . .5 .0 05.0 . 0.0 .0 5.00 .00 . 0. 05 .
1.6250 1.1875 -0.11 0.14 3.90 4.13 0.13 6.30 5.87 0.20 0.08
9.08
5 . . 5 - .5 .5 .0 0 .0 . 55.0 .0 5. 0 . 0 . 0.0 5.
2.2190 1.6250 -0.73 0.14 3.82 4.09 0.13 6.10 5.87 0.20 0.06
11.54
0. . 0 0.0 .5 .0 .0 .5 .0 .0 0.50 . 0 . 0. 5 0.
0.8125 0.6563 0.00 0.06 3.66 3.78 0.06 4.69 4.57 0.02 0.08
1.70
. 0. - .5 .5 .0 0 .0 . .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.1875 -0.10 0.14 3.82 4.06 0.13 5.67 5.31 0.16 0.07
6.19
5 .5 .0 - 5.0 .0 0 .0 .0 . .0 .0 .50 . 0 . 0. 0 .
2.2650 1.8125 -0.59 0.31 4.06 4.65 0.13 7.05 6.73 0.10 0.13
18.00
. . .0 .0 .0 0 .0 .0 .0 .0 . 0 .00 0 . 0. .
1.1406 0.8438 0.12 0.12 3.86 4.06 0.12 5.59 5.28 0.11 0.12
4.32
. . 0 .0 .0 .0 0 .0 . .0 .0 . 0 .00 0 . 0. . 0
1.1406 0.9688 0.12 0.12 3.86 4.06 0.13 5.63 5.28 0.11 0.12
4.63
5.0 . .0 .5 .0 .0 .5 .0 5.0 0.50 .00 . . 0.0 0.
0.5938 0.4375 0.12 0.06 3.70 3.82 0.06 4.61 4.53 0.02 0.08
1.04
0. . 0 0.0 .5 .0 .0 .5 .0 .0 0.50 . 0 . 0. 5 0.
0.8125 0.6563 0.00 0.06 3.70 3.82 0.06 4.69 4.57 0.02 0.08
1.63
0. .050 0.0 .5 .0 .0 .5 .0 .0 0.50 . 0 . 0. 5 0. 5
0.8125 0.7500 0.00 0.06 3.70 3.82 0.06 4.76 4.61 0.02 0.08
1.87
. . .0 .0 .0 0 .0 .0 .0 .0 . 0 .00 0 . 0. .
1.1406 0.8438 0.12 0.12 3.86 4.09 0.12 5.59 5.28 0.11 0.12
4.26
. . 0 .0 .0 .0 0 .0 . .0 .0 . 0 .00 0 . 0. .0
1.1406 0.9688 0.12 0.12 3.86 4.09 0.13 5.63 5.28 0.11 0.12
4.57
. .000 - .5 . .0 0.0 .5 .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.0630 -0.10 0.25 3.86 4.33 0.10 5.63 5.31 0.16 0.07
5.37
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 00 50.000 5. 00000 0. . 5 00 00 . 000 5 JM
3.5000 5.9055 1.4160 45000 11700 8820 71600
. 00 50.000 5. 00000 0. . 5 00 00 . 000 5 5 X
3.5000 5.9055 1.4170 45000 11700 8820 71600
. 00 5 . 00 . 00000 0. . 5 00 00 . 000 5 5 A
3.5000 6.0000 1.5625 45000 11700 8820 71600
. 00 5 . 00 . 00000 0. . 5 00 00 . 000 5 A 5 A
3.5000 6.0000 1.5625 45000 11700 8820 71600
. 00 5 . 00 . 5000 0. 0 . 00 000 . 5 0 000 HM5 5 HM5 0
3.5000 6.0000 1.5625 61800 16000 11000 90800
. 00 5 . 5 . 5 0 000 0. . 500 5 00 . 000 5 5 A
3.5000 6.2990 1.8750 68100 17700 10300 99200
. 00 0.000 5 . 5 000 0. 0 .50 000 000 . 5 000 5 0 5 5X
3.5000 6.2992 2.1250 77200 20000 13700 118000
. 00 0.0 0. 000 0. . 00 00 . 0000 50X 0
3.5000 6.3030 1.1860 37600 9750 7060 51700
. 00 . 5 . 5 0 000 0. . 500 5 00 . 000 5 5
3.5000 6.3750 1.8750 68100 17700 10300 99200
. 00 . 5 . 5 0 000 0. . 500 5 00 . 000 5
3.5000 6.3750 1.8750 68100 17700 10300 99200
. 00 . 5 5 . 5 000 0. 0 .50 000 000 . 5 000 5 0 5 5
3.5000 6.3750 2.1250 77200 20000 13700 118000
. 00 . 5 5 . 5 000 0. 0 .50 000 000 . 5 000 5 0 5
3.5000 6.3750 2.1250 77200 20000 13700 118000
. 00 . 5 . 5 5000 0. . 500 5 00 . 000
3.5000 6.6250 1.6250 55100 14300 11500 86700
. 00 . 5 . 5 0 000 0. . 500 5 00 . 000 5 5
3.5000 6.6250 1.8750 68100 17700 10300 99200
. 00 . 5 . 5 0 000 0. . 500 5 00 . 000 5
3.5000 6.6250 1.8750 68100 17700 10300 99200
. 00 . 5 5 . 5 000 0. 0 .00 00 50 00 . 5 5 000 50
3.5000 6.6250 2.1250 85100 22100 11300 117000
. 00 . 50 . 5 5000 0. . 500 5 00 .5 000 50 5
3.5000 6.7500 1.8750 70700 18300 11500 107000
. 00 0. 5 . 5 0000 0. .5 00 5 00 .5 5000 5
3.5000 7.1250 1.8750 72000 18700 12300 111000
. 00 0.500 5 . 50 000 0. . 0000 000 . 0000 55 5
3.5000 7.5000 2.2500 95300 24700 14200 142000
. 00 0.500 5 . 50 000 0. . 000 00 . 000 HH HH 0
3.5000 7.5000 2.2500 111000 28800 16500 156000
. 00 00.000 5 . 000 0. 0. 5 500 0 000 0. 5 000 50
3.5000 7.8740 2.0772 84600 21900 23700 117000
.0 0 . 5. 00000 0. . 5 00 00 . 000 5 -S 5 XE
3.5075 5.8125 1.4062 45000 11700 8820 71600
.0 0 5 . 00 . 00000 0. . 5 00 00 . 000 5 -S 5 A
3.5075 6.0000 1.5625 45000 11700 8820 71600
. . 5 5 . 5 000 0. 0 .00 00 50 00 . 5 5 000 50A
3.5390 6.6250 2.1250 85100 22100 11300 117000
. 5 . 5 0.000 5 000 0. . 0 5 00 00 . 000 HM HM 0
3.5423 5.7864 1.5748 57000 14800 8420 87300
. 0.0 0. 000 0. . 00 00 . 0000 5 0
3.5430 6.3030 1.1860 37600 9750 7060 51700
0.000 5.000 .000 0000 0. . 00 000 . 55000 JP 0 JP 0 0
3.5433 5.3150 0.9449 24600 6390 5410 34900
0.000 0.000 .000 0000 0. . 000 00 . 000 XAA 0 X Y 0 X
3.5433 5.5118 1.2598 38200 9890 7160 59400
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. .000 - .5 .5 .0 0 .0 .5 .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.0630 -0.10 0.14 3.86 4.09 0.10 5.63 5.31 0.16 0.07
5.44
. .000 - .5 .5 .0 0 .0 .0 .0 .0 . 0 . 0 5 . 0. .
1.4300 1.0630 -0.10 0.14 3.86 4.09 0.12 5.59 5.28 0.16 0.07
5.43
. 0. - .5 .5 .0 0 .0 . .0 5.0 . 0 . 0 5 . 0. . 5
1.4300 1.1875 -0.10 0.14 3.86 4.09 0.13 5.67 5.31 0.16 0.07
6.05
. 0. - .5 . .0 0.0 . .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.1875 -0.10 0.25 3.86 4.33 0.13 5.67 5.31 0.16 0.07
5.98
. 0. - . . 00.0 .0 . .0 .0 . 0 .50 . 0.0 .
1.5625 1.1875 -0.25 0.25 3.94 4.41 0.13 5.79 5.39 0.13 0.14
6.14
. 0 . 00 - . .5 .0 0 .0 0. 50.0 .0 . 0 0. 0 . 0.0 5 .
1.9000 1.5000 -0.47 0.14 3.90 4.17 0.03 5.91 5.75 0.13 0.04
8.69
55. 00 . 50 - . .5 0 .0 0 .0 .0 5 .5 .0 . 0 0. 0 .5 0. 0 .5
2.1693 1.7500 -0.52 0.14 4.01 4.29 0.12 6.04 5.55 0.16 0.03
9.97
0. . 0 -0.5 . .0 0 .0 . .0 .0 . 0 .50 . 0.0 . 0
1.1875 0.8780 -0.02 0.09 3.86 4.02 0.13 5.87 5.63 0.15 0.10
5.28
. 0 . 00 - . .5 .0 0 .0 . 50.0 .0 . 0 0. 0 . 0.0 5 .0
1.9000 1.5000 -0.47 0.14 3.90 4.17 0.13 5.91 5.67 0.13 0.04
8.97
. 0 . 00 - . .0 .0 .0 . 50.0 .0 . 0 0. 0 . 0.0 5 .0
1.9000 1.5000 -0.47 0.28 3.90 4.45 0.13 5.91 5.67 0.13 0.04
8.87
55. 00 . - . .5 0 .0 0 .0 . 5 .0 .0 . 0 0. 0 .5 0. 0 .
2.1693 1.6875 -0.52 0.14 4.01 4.29 0.13 6.06 5.55 0.16 0.03
10.28
55. 00 . - . .5 0 .0 0 .0 0. 5 .0 .0 . 0 0. 0 .5 0. 0 .
2.1693 1.6875 -0.52 0.14 4.01 4.29 0.03 6.06 5.67 0.16 0.03
10.32
. 5 0. - . .5 0 .0 0 .0 . 0.0 .0 5.00 .00 . 0. 05 .
1.6250 1.1875 -0.11 0.14 3.98 4.21 0.13 6.30 5.87 0.20 0.08
8.77
. 0 . 00 - . .5 .0 0 .0 . 50.0 .0 . 0 0. 0 . 0.0 5 .5
1.9000 1.5000 -0.47 0.14 3.90 4.17 0.13 5.91 5.79 0.13 0.04
10.01
. 0 . 00 - . .0 .0 .0 . 50.0 .0 . 0 0. 0 . 0.0 5 .
1.9000 1.5000 -0.47 0.28 3.90 4.45 0.13 5.91 5.79 0.13 0.04
9.91
5 . . 5 - .5 .5 00.0 0 .0 . 55.0 .0 5. 0 . 0 . 0.0 5.0
2.2190 1.6250 -0.73 0.14 3.94 4.17 0.13 6.10 5.87 0.20 0.06
11.12
. 0 . 00 - . 5.0 0 .0 0.0 . .0 5 .0 .50 .00 0 . 0. 0 .
1.9000 1.5000 -0.38 0.20 3.98 4.33 0.13 6.34 6.02 0.14 0.04
10.74
.00 . 00 - . . 0 .0 .0 . .0 .0 . 0 . 0 . 0. 0 5.
1.8900 1.5000 -0.32 0.19 4.06 4.41 0.13 6.61 6.34 0.14 0.05
12.64
5 .5 . 50 - 5. .0 0 .0 .0 . .0 0.0 5. 0 0. 0 . 0. 0 . 5
2.2650 1.7500 -0.60 0.31 4.06 4.65 0.13 6.85 6.69 0.22 0.02
16.87
5 .5 .0 - 5.0 .0 05.0 0.0 . .0 .0 .50 . 0 . 0. 0 .0
2.2650 1.8125 -0.59 0.31 4.13 4.72 0.13 7.05 6.73 0.10 0.13
17.78
. . 5 . .5 .0 .0 . .0 .0 . 0 5. 0 0 . 0. .
1.9375 1.3750 0.05 0.14 4.41 4.65 0.13 7.40 6.85 0.34 0.21
16.51
. . - .5 .5 .0 05.0 0. .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.0312 -0.10 0.14 3.86 4.13 0.03 5.59 5.31 0.16 0.07
5.16
. 0. - .5 .5 .0 05.0 . .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.1875 -0.10 0.14 3.86 4.13 0.13 5.67 5.31 0.16 0.07
6.04
5 . . 5 - .5 .5 0 .0 0 .0 . 55.0 .0 5. 0 . 0 . 0.0 .
2.2190 1.6250 -0.73 0.14 3.98 4.21 0.13 6.10 5.87 0.20 0.06
10.98
0.000 .500 - . .0 .0 .0 .5 .0 .0 . 0 . 0 . 0.0 .5
1.5748 1.2795 -0.34 0.28 3.90 4.41 0.14 5.55 5.24 0.06 0.12
5.58
0. . 0 -0.5 . .0 0 .0 . .0 .0 . 0 .50 . 0.0 .
1.1875 0.8780 -0.02 0.09 3.90 4.06 0.13 5.87 5.63 0.15 0.10
5.20
.500 .500 5. .0 .0 00.0 .0 0.0 5.0 . 0 . 0 . 0. .0
0.8858 0.6890 0.22 0.08 3.82 3.94 0.08 5.12 4.92 0.07 0.13
2.41
.000 .000 - .0 .0 .0 .0 .5 .0 .0 . 0 . 0 . 0. . 0
1.2598 0.9449 -0.08 0.24 3.86 4.37 0.06 5.28 5.04 0.13 0.09
3.75
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
0.000 5.000 5.000 0 000 0. . 5 5 00 0 00 . 000 JM A JM 0
3.5433 5.7087 1.3780 46300 12000 9130 70500
0.000 5.000 5.000 0 000 0. . 5 5 00 0 00 . 000 JM JM 0
3.5433 5.7087 1.3780 46300 12000 9130 70500
0.000 . 5 . 50 5 000 0. . 00 000 . 000 5 X 5
3.5433 5.8750 1.2500 33900 8790 7410 54300
0.000 50.000 5. 00000 0. . 5 00 00 . 000 5 X 5 X
3.5433 5.9055 1.4170 45000 11700 8820 71600
0.000 5 . 00 . 00000 0. . 5 00 00 . 000 5 X 5 A
3.5433 6.0000 1.5625 45000 11700 8820 71600
0.000 55.000 .000 0 000 0. . 00 00 . 000 JHM JHM 0
3.5433 6.1024 1.7323 68900 17900 10400 101000
0.000 0.000 5 . 5 000 0. 0 .50 000 000 . 5 000 5 X 5 5X
3.5433 6.2992 2.1250 77200 20000 13700 118000
0.000 . 5 5 . 5 000 0. 0 .50 000 000 . 5 000 5 X 5 5
3.5433 6.3750 2.1250 77200 20000 13700 118000
0.000 0.000 50. 00 000 0. 0. 00 5000 0. 000 J 0 5 J 0
3.5433 7.4803 2.0000 67300 17400 25900 88100
0.000 0.000 5 . 50 000 0. . 000 00 . 000 JHH JHH
3.5433 7.4803 2.2500 111000 28800 16500 156000
0. . 5 . 5 0 000 0. . 500 5 00 . 000 0 5
3.5625 6.3750 1.8750 68100 17700 10300 99200
0. . 5 . 5 0 000 0. . 500 5 00 . 000 0 5
3.5625 6.6250 1.8750 68100 17700 10300 99200
. 5 . 5 0.000 5 000 0. . 5 00 00 . 0000 LM LM 0
3.6210 5.6250 1.1811 34100 8830 7230 53900
.0 5 0. 5 0. 00 0. 5 . 00 00 . 000 L 5 L 0
3.6250 5.1250 0.8125 19900 5150 3080 37400
.0 5 .050 . 000 0. 5 . 00 00 . 0 0 000 0 0
3.6250 5.7500 1.3125 41000 10600 8160 69000
.0 5 . 5. 00000 0. . 5 00 00 . 000 5 5 XE
3.6250 5.8125 1.4062 45000 11700 8820 71600
.0 5 . 5. 00000 0. . 5 00 00 . 000 5 5 XS
3.6250 5.8125 1.4062 45000 11700 8820 71600
.0 5 . 0 .5 5 5 000 0. . 00 000 . 000 5
3.6250 5.8437 1.1250 33900 8790 7410 54300
.0 5 . 5 . 50 5 000 0. . 00 000 . 000 5
3.6250 5.8750 1.2500 33900 8790 7410 54300
.0 5 50.000 5. 00000 0. . 5 00 00 . 000 5 JM
3.6250 5.9055 1.4160 45000 11700 8820 71600
.0 5 5 . 00 . 00000 0. . 5 00 00 . 000 5 5 A
3.6250 6.0000 1.5625 45000 11700 8820 71600
.0 5 5 . 00 . 00000 0. . 5 00 00 . 000 5 5 -S
3.6250 6.0000 1.5625 45000 11700 8820 71600
.0 5 5 . 00 . 00000 0. . 5 00 00 . 000 5 A 5 A
3.6250 6.0000 1.5625 45000 11700 8820 71600
.0 5 5 . 00 . 00000 0. . 5 00 00 . 000 5 X 5 A
3.6250 6.0000 1.5625 45000 11700 8820 71600
.0 5 . 5 . 5 5000 0. . 500 5 00 . 000
3.6250 6.6250 1.6250 55100 14300 11500 86700
.0 5 . 5 . 5 5000 0. . 500 5 00 . 000 A
3.6250 6.6250 1.6250 55100 14300 11500 86700
.0 5 . 50 . 5 5000 0. . 500 5 00 .5 000 5
3.6250 6.7500 1.8750 70700 18300 11500 107000
.0 5 . 50 . 5 5000 0. . 500 5 00 .5 000 5
3.6250 6.7500 1.8750 70700 18300 11500 107000
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.000 .000 - .0 .0 .0 .0 .5 .5 .0 . 0 . 0 5. 0.0 .
1.3386 1.0630 -0.08 0.24 3.90 4.41 0.10 5.46 5.16 0.08 0.15
4.69
.000 .000 - .0 .0 .0 0 .0 .5 .5 .0 . 0 . 0 5. 0.0 .
1.3386 1.0630 -0.08 0.12 3.90 4.17 0.10 5.46 5.16 0.08 0.15
4.72
. . 0 .0 .0 .0 0 .0 . .0 .0 . 0 .00 0 . 0. .0
1.1406 0.9688 0.12 0.12 3.90 4.09 0.13 5.63 5.28 0.11 0.12
4.49
. .000 - .5 .0 .0 0 .0 .0 .0 .0 . 0 . 0 5 . 0. .
1.4300 1.0630 -0.10 0.12 3.90 4.09 0.12 5.59 5.28 0.16 0.07
5.34
. 0. - .5 .0 .0 0 .0 . .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.1875 -0.10 0.12 3.90 4.09 0.13 5.67 5.31 0.16 0.07
5.97
.000 5.500 - . .0 00.0 0 .0 .5 .0 0.0 . 0 . 0 . 0.0 .
1.7323 1.3976 -0.39 0.12 3.94 4.17 0.10 5.83 5.51 0.05 0.13
7.31
55. 00 . 50 - . .0 0 .0 0 .0 .0 5 .5 .0 . 0 0. 0 .5 0. 0 .
2.1693 1.7500 -0.52 0.12 4.02 4.29 0.12 6.04 5.55 0.16 0.03
9.86
55. 00 . - . .0 0 .0 0 .0 . 5 .0 .0 . 0 0. 0 .5 0. 0 .
2.1693 1.6875 -0.52 0.12 4.02 4.29 0.13 6.06 5.55 0.16 0.03
10.16
.0 . 50 . .5 .0 0.0 . .5 .0 .00 . 0 50 . 0. 0 .0
1.8125 1.2500 0.50 0.14 4.40 4.72 0.13 7.06 6.38 0.43 0.14
13.31
5 .5 .0 - 5.0 .0 0 .0 .0 . .0 .0 .50 . 0 . 0. 0 .
2.2650 1.8125 -0.59 0.31 4.17 4.76 0.13 7.05 6.73 0.10 0.13
17.51
. 0 . 00 - . .5 0 .0 0 .0 . 50.0 .0 . 0 0. 0 . 0.0 5 .
1.9000 1.5000 -0.47 0.14 3.98 4.21 0.13 5.91 5.67 0.13 0.04
8.78
. 0 . 00 - . .5 0 .0 0 .0 . 50.0 .0 . 0 0. 0 . 0.0 5 . 5
1.9000 1.5000 -0.47 0.14 3.98 4.21 0.13 5.91 5.79 0.13 0.04
9.82
0.000 .000 . .5 00.0 0 .0 . .0 .0 . 0 . 0 . 0. 55 .
1.1811 0.8661 0.07 0.14 3.94 4.17 0.13 5.43 5.08 0.11 0.08
3.60
. . 0 . .5 .0 05.0 .5 5.0 .0 0. 0 . 0 5 0. 0. 0 0.
0.8438 0.6563 0.05 0.14 3.90 4.13 0.06 4.92 4.80 0.03 0.05
1.89
. 5 . 5 - .0 .5 0 .0 0 .0 . 0.0 .0 . 0 0. 0 5 . 0. .05
1.3750 1.0313 -0.04 0.14 3.98 4.21 0.13 5.51 5.16 0.10 0.01
4.53
. . - .5 .5 0 .0 0 .0 0. .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.0312 -0.10 0.14 3.98 4.21 0.03 5.59 5.31 0.16 0.07
4.89
. . - .5 .5 0 .0 0 .0 . .0 .0 . 0 . 0 5 . 0. . 0
1.4300 1.0312 -0.10 0.14 3.98 4.21 0.13 5.59 5.24 0.16 0.07
4.85
. . .0 .5 0 .0 0 .0 .0 .0 .0 . 0 .00 0 . 0. .
1.1406 0.8438 0.12 0.14 3.98 4.21 0.12 5.59 5.28 0.11 0.12
4.02
. . 0 .0 .5 0 .0 0 .0 . .0 .0 . 0 .00 0 . 0. .
1.1406 0.9688 0.12 0.14 3.98 4.21 0.13 5.63 5.28 0.11 0.12
4.33
. .000 - .5 .5 0 .0 0 .0 .5 .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.0630 -0.10 0.14 3.98 4.21 0.10 5.63 5.31 0.16 0.07
5.16
. 0. - .5 .5 0 .0 0 .0 . .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.1875 -0.10 0.14 3.98 4.21 0.13 5.67 5.31 0.16 0.07
5.77
. . - .5 .5 0 .0 0 .0 . .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.5625 -0.10 0.14 3.98 4.21 0.13 5.79 5.31 0.16 0.07
6.09
. 0. - .5 . 0 .0 .0 . .0 5.0 . 0 . 0 5 . 0. .5
1.4300 1.1875 -0.10 0.25 3.98 4.45 0.13 5.67 5.31 0.16 0.07
5.70
. 0. - .5 .5 0 .0 0 .0 . .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.1875 -0.10 0.14 4.09 4.21 0.13 5.67 5.31 0.16 0.07
5.76
. 5 0. - . .5 0 .0 0.0 . 0.0 .0 5.00 .00 . 0. 05 .
1.6250 1.1875 -0.11 0.14 4.09 4.33 0.13 6.30 5.87 0.20 0.08
8.45
. 5 0. - . . 0 .0 .0 . 0.0 .0 5.00 .00 . 0. 05 . 0
1.6250 1.1875 -0.11 0.25 4.09 4.57 0.13 6.30 5.87 0.20 0.08
8.38
. 0 . 00 - . .5 0 .0 0 .0 . .0 5 .0 .50 .00 0 . 0. 0 .
1.9000 1.5000 -0.38 0.14 4.06 4.29 0.13 6.34 6.02 0.14 0.04
10.40
. 0 . 00 - . . 0 .0 5.0 . .0 5 .0 .50 .00 0 . 0. 0 .
1.9000 1.5000 -0.38 0.25 4.06 4.53 0.13 6.34 6.02 0.14 0.04
10.33
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
.0 5 0. 5 . 5 0000 0. .5 00 5 00 .5 5000
3.6250 7.1250 1.8750 72000 18700 12300 111000
.0 5 0.500 5 . 50 000 0. . 0000 000 . 0000 5 5
3.6250 7.5000 2.2500 95300 24700 14200 142000
.0 5 0.500 5 . 50 000 0. . 000 00 . 000 HH HH 0
3.6250 7.5000 2.2500 111000 28800 16500 156000
.0 5 . .0 5 5 000 0. . 55000 000 . 000 EE
3.6250 8.4375 2.8750 134000 34800 27300 177000
. . 0 .5 5 5 000 0. . 00 000 . 000 5
3.6875 5.8437 1.1250 33900 8790 7410 54300
. . 5 . 50 5 000 0. . 00 000 . 000 5
3.6875 5.8750 1.2500 33900 8790 7410 54300
. 5 . 00 . 00000 0. . 5 00 00 . 000 5 5 A
3.6875 6.0000 1.5625 45000 11700 8820 71600
. 5 . . 50 5 000 0. . 00 000 . 000 5 0
3.7392 5.9045 1.2500 33900 8790 7410 54300
. 5 . 5 . 5 5000 0. . 500 5 00 . 000
3.7392 6.6250 1.6250 55100 14300 11500 86700
5.000 5.000 0.000 00 0.5 .0 00 00 .00 000 JL JL 0
3.7402 5.3150 0.7874 17300 4480 4470 29900
5.000 5.000 .000 000 0. . 0 00 00 . 000 JP 00 JP 00 0
3.7402 5.7087 0.9449 26100 6770 5480 38700
5.000 5.000 .000 000 0. . 5 00 00 . 0 000 XAA 0 Y 0
3.7402 5.7087 1.5354 51300 13300 6320 85100
5.000 50.000 5.000 000 0. . 5 500 000 . 000 JM JM
3.7402 5.9055 1.3780 44700 11600 8770 71100
5.000 5 . 00 . 0 00000 0. . 5 00 00 . 000 J5 X 5 A
3.7402 6.0000 1.5625 45000 11700 8820 71600
5.000 0.000 .000 000 0. . 5 00 00 . 50 000 JF 5 JF 5 0
3.7402 6.2992 1.8110 73800 19100 11100 114000
5.000 0.000 5 .000 000 0. . 0000 000 . 0000 5
3.7402 7.4803 2.2441 95300 24700 14200 142000
5. 50 0. 5 0. 00 0. 5 . 00 00 . 000 L L 0
3.7500 5.1250 0.8125 19900 5150 3080 37400
5. 50 .5 5 0. 000 0. . 500 00 .0 000 LM LM
3.7500 5.3750 1.1875 29100 7530 3660 51100
5. 50 .050 . 000 0. 5 . 00 00 . 0 0 000 0
3.7500 5.7500 1.3125 41000 10600 8160 69000
5. 50 .050 . 000 0. 5 . 00 00 . 0 0 000 0
3.7500 5.7500 1.3125 41000 10600 8160 69000
5. 50 . 5. 00000 0. . 5 00 00 . 000 5 5 XS
3.7500 5.8125 1.4062 45000 11700 8820 71600
5. 50 . 5. 00000 0. . 5 00 00 . 000 5 5 AX
3.7500 5.8200 1.4062 45000 11700 8820 71600
5. 50 . 0 .5 5 5 000 0. . 00 000 . 000 5 5
3.7500 5.8437 1.1250 33900 8790 7410 54300
5. 50 . 0 .5 5 5 000 0. . 00 000 . 000 5
3.7500 5.8437 1.1250 33900 8790 7410 54300
5. 50 . 0 .5 5 5 000 0. . 00 000 . 000 5A 5
3.7500 5.8437 1.1250 33900 8790 7410 54300
5. 50 . 5 . 50 5 000 0. . 00 000 . 000 5 5
3.7500 5.8750 1.2500 33900 8790 7410 54300
5. 50 . 5 . 50 5 000 0. . 00 000 . 000 5
3.7500 5.8750 1.2500 33900 8790 7410 54300
5. 50 50.000 5. 00000 0. . 5 00 00 . 000 5 AA JM
3.7500 5.9055 1.4160 45000 11700 8820 71600
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.00 . 00 - . .5 05.0 .0 . .0 .0 . 0 . 0 . 0. 0 5.5
1.8900 1.5000 -0.32 0.14 4.13 4.37 0.13 6.61 6.34 0.14 0.05
12.29
5 .5 . 50 - 5. .0 0 .0 .0 . .0 0.0 5. 0 0. 0 . 0. 0 . 5
2.2650 1.7500 -0.60 0.31 4.17 4.76 0.13 6.85 6.69 0.22 0.02
16.42
5 .5 .0 - 5.0 .0 0 .0 .0 . .0 .0 .50 . 0 . 0. 0 .
2.2650 1.8125 -0.59 0.31 4.21 4.80 0.13 7.05 6.73 0.10 0.13
17.33
.0 5 5 . 5 - . . .0 5.0 . .0 .0 * * . 0. 0 .
2.8750 2.1250 -0.72 0.38 4.61 5.31 0.25 7.71 7.17 * *
27.19
. . .0 .0 0 .0 0 .0 .0 .0 .0 . 0 .00 0 . 0. .
1.1406 0.8438 0.12 0.12 4.02 4.21 0.12 5.59 5.28 0.11 0.12
3.91
. . 0 .0 .0 0 .0 0 .0 . .0 .0 . 0 .00 0 . 0. .
1.1406 0.9688 0.12 0.12 4.02 4.21 0.13 5.63 5.28 0.11 0.12
4.22
. 0. - .5 .5 0 .0 0 .0 . .0 5.0 . 0 . 0 5 . 0. .55
1.4300 1.1875 -0.10 0.14 4.02 4.29 0.13 5.67 5.31 0.16 0.07
5.63
. . 0 .0 .0 0 .0 0 .0 . .0 5.0 . 0 .00 0 . 0. .
1.1406 0.9688 0.12 0.12 4.06 4.25 0.13 5.63 5.31 0.11 0.12
4.22
. 5 0. - . .5 0 .0 .0 . 0.0 .0 5.00 .00 . 0. 05 .
1.6250 1.1875 -0.11 0.14 4.17 4.45 0.13 6.30 5.87 0.20 0.08
8.15
0.000 .000 0. 5.0 0 .0 .0 .5 .0 .0 .50 . 0 . 0.5 0. 0. 5
0.7874 0.5512 0.43 0.20 4.02 4.37 0.10 5.08 4.84 0.10 0.05
1.88
.500 .500 . .0 0 .0 0 .0 .0 0.0 .0 . 0 . 0 0 0. 0. .
0.8858 0.6890 0.24 0.12 4.02 4.25 0.12 5.51 5.28 0.08 0.13
2.79
.000 .500 - 0. .0 0 .0 .0 .5 .0 .0 . 0 . 0 . 0.0 0 .
1.5354 1.2795 -0.40 0.24 4.02 4.49 0.06 5.47 5.24 0.07 0.09
4.93
.000 .000 - .5 .0 0 .0 0 .0 .5 .0 5.0 . 0 .00 50 . 0. .
1.3386 1.0630 -0.06 0.12 4.09 4.29 0.10 5.63 5.31 0.12 0.12
4.78
. 0. .5 .0 0 .0 .0 . .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.1875 0.10 0.31 4.06 4.69 0.13 5.67 5.31 0.16 0.07
5.37
.000 .000 - 0. .0 05.5 .0 .0 5 .0 5.0 . 0 .00 0 . 0.0 .
1.8110 1.4961 -0.42 0.12 4.15 4.37 0.12 6.06 5.71 0.06 0.12
8.22
5 .5 .000 - 5. . 0 .0 0.0 .0 .0 0.0 5. 0 0. 0 . 0. 0 .
2.2650 1.8898 -0.60 0.25 4.25 4.72 0.12 6.86 6.69 0.22 0.02
16.22
. . 0 . .5 0 .0 0 .0 .5 5.0 .0 0. 0 . 0 5 0. 0. 0 0.
0.8438 0.6563 0.05 0.06 3.98 4.06 0.06 4.92 4.80 0.03 0.05
1.75
0. . 0 - . . 0 .0 05.0 . .0 .0 . 0 -0. 0 0. . 5
1.1875 0.9688 -0.18 0.09 4.02 4.13 0.09 5.16 4.96 0.05 -0.01
2.97
. 5 . 5 - .0 .5 0 .0 0.0 . 0.0 .0 . 0 0. 0 5 . 0. .
1.3750 1.0313 -0.04 0.14 4.06 4.33 0.13 5.51 5.16 0.10 0.01
4.25
. 5 . 5 - .0 .0 0 .0 .0 . 0.0 .0 . 0 0. 0 5 . 0. .
1.3750 1.0313 -0.04 0.28 4.06 4.61 0.13 5.51 5.16 0.10 0.01
4.12
. . - .5 .5 0 .0 0.0 . .0 .0 . 0 . 0 5 . 0. .0
1.4300 1.0312 -0.10 0.14 4.09 4.33 0.13 5.59 5.24 0.16 0.07
4.56
. . - .5 .5 0 .0 0.0 . .0 .0 . 0 . 0 5 . 0. . 0
1.4300 1.0312 -0.10 0.14 4.09 4.33 0.13 5.59 5.24 0.16 0.07
4.63
. . .0 .0 0 .0 0 .0 .0 .0 .0 . 0 .00 0 . 0. .
1.1406 0.8438 0.12 0.12 4.06 4.25 0.12 5.59 5.28 0.11 0.12
3.82
. . .0 .5 0 .0 0 .0 .0 .0 .0 . 0 .00 0 . 0. .
1.1406 0.8438 0.12 0.14 4.06 4.29 0.12 5.59 5.28 0.11 0.12
3.79
. . .0 0. 0 .0 0 .0 .0 .0 .0 . 0 .00 0 . 0. .
1.1406 0.8438 0.12 0.03 4.06 4.09 0.12 5.59 5.28 0.11 0.12
3.82
. . 0 .0 .0 0 .0 0 .0 . .0 .0 . 0 .00 0 . 0. .
1.1406 0.9688 0.12 0.12 4.06 4.25 0.13 5.63 5.28 0.11 0.12
4.13
. . 0 .0 .5 0 .0 0 .0 . .0 .0 . 0 .00 0 . 0. .
1.1406 0.9688 0.12 0.14 4.06 4.29 0.13 5.63 5.28 0.11 0.12
4.10
. .000 - .5 0. 0 .0 0 .0 .5 .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.0630 -0.10 0.03 4.09 4.21 0.10 5.63 5.31 0.16 0.07
4.90
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
5. 50 50.000 5. 00000 0. . 5 00 00 . 000 5 JM
3.7500 5.9055 1.4160 45000 11700 8820 71600
5. 50 50.000 5. 00000 0. . 5 00 00 . 000 5 5 X
3.7500 5.9055 1.4170 45000 11700 8820 71600
5. 50 5 . 00 . 00000 0. . 5 00 00 . 000 5 5 A
3.7500 6.0000 1.5625 45000 11700 8820 71600
5. 50 5 . 00 . 00000 0. . 5 00 00 . 000 5 A 5 A
3.7500 6.0000 1.5625 45000 11700 8820 71600
5. 50 5 . .5 0 000 0. . 5 00 00 . 000 5 5 5
3.7500 6.1875 1.4375 46500 12100 9800 77000
5. 50 . 5 .5 0 000 0. . 5 00 00 . 000 5 5 5
3.7500 6.3750 1.4375 46500 12100 9800 77000
5. 50 . 5 . 0 0 000 0. . 5 00 00 . 000 5 5 5
3.7500 6.3750 1.5626 46500 12100 9800 77000
5. 50 . 5 . 5 5000 0. . 500 5 00 . 000
3.7500 6.6250 1.6250 55100 14300 11500 86700
5. 50 . 5 . 5 5000 0. . 500 5 00 . 000 XA
3.7500 6.6250 1.6250 55100 14300 11500 86700
5. 50 . 50 . 5 5000 0. . 500 5 00 .5 000 5 5
3.7500 6.7500 1.8750 70700 18300 11500 107000
5. 50 . 50 . 5 5000 0. . 500 5 00 .5 000 5
3.7500 6.7500 1.8750 70700 18300 11500 107000
5. 50 . 50 50. 00 5000 0. . 500 5 00 .5 000 5 X
3.7500 6.7500 2.0000 70700 18300 11500 107000
5. 50 0. 5 . 5 0000 0. .5 00 5 00 .5 5000
3.7500 7.1250 1.8750 72000 18700 12300 111000
5. 50 0.500 5 . 50 000 0. . 0000 000 . 0000 5
3.7500 7.5000 2.2500 95300 24700 14200 142000
5. 50 0.500 5 . 50 000 0. . 000 00 . 000 HH 0 HH 0
3.7500 7.5000 2.2500 111000 28800 16500 156000
5. 50 00.0 5 . 000 0. . 000 00 . 000 HH 0 HH
3.7500 7.8750 2.4375 111000 28800 16500 156000
5. 50 00.0 5 .0 5 000 0. . 000 00 . 0 000 EH 0 EH 0 0
3.7500 7.8750 2.8750 149000 38600 21100 204000
. . 0 .5 5 5 000 0. . 00 000 . 000 5
3.8125 5.8437 1.1250 33900 8790 7410 54300
. . 5 . 50 5 000 0. . 00 000 . 000 5
3.8125 5.8750 1.2500 33900 8790 7410 54300
. . 50. 00 000 0. 0. 00 5000 0. 000 0 0
3.8125 7.4375 2.0000 67300 17400 25900 88100
. 5 5 . .5 0 000 0. . 5 00 00 . 000 5 5
3.8750 6.1875 1.4375 46500 12100 9800 77000
. 5 . 5 .5 0 000 0. . 5 00 00 . 000 5 5
3.8750 6.3750 1.4375 46500 12100 9800 77000
. 5 . 5 . 5 5000 0. . 500 5 00 . 000 5
3.8750 6.6250 1.6250 55100 14300 11500 86700
. 5 0. 5 . 5 0000 0. .5 00 5 00 .5 5000
3.8750 7.1250 1.8750 72000 18700 12300 111000
. 5 . 50 .500 000 0. . 0 000 500 .5 000 HH C HH 0
3.8750 7.2500 2.5000 110000 28600 18300 174000
. 5 0.500 5 . 50 000 0. . 000 00 . 000 HH HH 0
3.8750 7.5000 2.2500 111000 28800 16500 156000
. 5 . 5 . 5 0000 0. . 000 000 . 0 000 HH HH 0
3.8750 8.3750 2.6250 142000 36700 20500 204000
. 5 5 . 5 .000 000 0. . 0 00 000 . 000 HM 0 HM 0 0
3.9360 6.1801 1.6535 62500 16200 9230 98500
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. .000 - .5 .5 0 .0 0.0 .5 .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.0630 -0.10 0.14 4.09 4.33 0.10 5.63 5.31 0.16 0.07
4.87
. .000 - .5 .5 0 .0 0.0 .0 .0 .0 . 0 . 0 5 . 0. . 0
1.4300 1.0630 -0.10 0.14 4.09 4.33 0.12 5.59 5.28 0.16 0.07
4.85
. 0. - .5 .5 0 .0 0.0 . .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.1875 -0.10 0.14 4.09 4.33 0.13 5.67 5.31 0.16 0.07
5.48
. 0. - .5 5.0 0 .0 .0 . .0 5.0 . 0 . 0 5 . 0. .
1.4300 1.1875 -0.10 0.20 4.09 4.45 0.13 5.67 5.31 0.16 0.07
5.44
. . 5 -0.5 .5 05.0 .0 . 5 .0 .0 . 0 .50 5 . 0. 5 .
1.4219 1.0313 -0.02 0.14 4.13 4.41 0.13 5.98 5.59 0.17 0.10
5.86
. . 5 -0.5 .5 05.0 .0 . 5 .0 .0 . 0 .50 5 . 0. 5 . 0
1.4219 1.0313 -0.02 0.14 4.13 4.41 0.13 6.06 5.67 0.17 0.10
6.39
. . 0 -0.5 .5 05.0 .0 . 5 .0 .0 . 0 .50 5 . 0. 5 .0
1.4219 1.1563 -0.02 0.14 4.13 4.41 0.13 6.06 5.63 0.17 0.10
6.76
. 5 0. - . .5 0 .0 .0 . 0.0 .0 5.00 .00 . 0. 05 .
1.6250 1.1875 -0.11 0.14 4.17 4.45 0.13 6.30 5.87 0.20 0.08
8.12
. 5 0. - . 5.0 0 .0 .0 . 0.0 .0 5.00 .00 . 0. 05 .
1.6250 1.1875 -0.11 0.20 4.17 4.57 0.13 6.30 5.87 0.20 0.08
8.08
. 0 . 00 - . .5 0 .0 .0 . .0 5 .0 .50 .00 0 . 0. 0 .5
1.9000 1.5000 -0.38 0.14 4.17 4.45 0.13 6.34 6.02 0.14 0.04
10.01
. 0 . 00 - . . 0 .0 .0 . .0 5 .0 .50 .00 0 . 0. 0 .5
1.9000 1.5000 -0.38 0.25 4.17 4.65 0.13 6.34 6.02 0.14 0.04
9.93
. 0 . 5 - . .5 0 .0 .0 . .0 5 .0 .50 .00 0 . 0. 0 .
1.9000 1.6250 -0.38 0.14 4.17 4.45 0.13 6.34 5.98 0.14 0.04
10.44
.00 . 00 - . .5 0 .0 .0 . .0 .0 . 0 . 0 . 0. 0 5. 0
1.8900 1.5000 -0.32 0.14 4.21 4.49 0.13 6.61 6.34 0.14 0.05
11.90
5 .5 . 50 - 5. .0 0 .0 .0 . .0 0.0 5. 0 0. 0 . 0. 0 .
2.2650 1.7500 -0.60 0.31 4.25 4.84 0.13 6.85 6.69 0.22 0.02
15.95
5 .5 .0 - 5.0 .0 0.0 5.0 . .0 .0 .50 . 0 . 0. 0 . 5
2.2650 1.8125 -0.59 0.31 4.33 4.92 0.13 7.05 6.73 0.10 0.13
16.86
5 .5 50. 00 - 5.0 .0 0.0 5.0 . .0 .0 .50 . 0 . 0. 0 . 5
2.2650 2.0000 -0.59 0.31 4.33 4.92 0.13 7.05 6.85 0.10 0.13
20.17
.0 5 5 . - . . 5.5 0.0 . .0 .0 5. 0 . 0 0 . 0. 0 0.
2.8750 2.3125 -0.97 0.13 4.55 4.72 0.13 7.36 6.97 0.23 0.09
23.46
. . .0 .5 0 .0 0.0 .0 .0 .0 . 0 .00 0 . 0. .
1.1406 0.8438 0.12 0.14 4.09 4.33 0.12 5.59 5.28 0.11 0.12
3.67
. . 0 .0 .5 0 .0 0.0 . .0 .0 . 0 .00 0 . 0. . 0
1.1406 0.9688 0.12 0.14 4.09 4.33 0.13 5.63 5.28 0.11 0.12
3.98
.0 . 50 . .5 .0 5.0 . .5 .0 .00 . 0 50 . 0. 0 5.5
1.8125 1.2500 0.50 0.14 4.44 4.92 0.13 7.06 6.34 0.43 0.14
12.33
. . 5 -0.5 .5 0 .0 .0 . 5 .0 .0 . 0 .50 5 . 0. 5 .5
1.4219 1.0313 -0.02 0.14 4.25 4.49 0.13 5.98 5.59 0.17 0.10
5.55
. . 5 -0.5 .5 0 .0 .0 . 5 .0 .0 . 0 .50 5 . 0. 5 .
1.4219 1.0313 -0.02 0.14 4.25 4.49 0.13 6.06 5.67 0.17 0.10
6.08
. 5 0. - . .5 0 .0 .0 . 0.0 .0 5.00 .00 . 0. 05 .5
1.6250 1.1875 -0.11 0.14 4.29 4.57 0.13 6.30 5.87 0.20 0.08
7.77
.00 . 00 - . .5 0.0 .0 . .0 .0 . 0 . 0 . 0. 0 5.
1.8900 1.5000 -0.32 0.14 4.33 4.57 0.13 6.61 6.34 0.14 0.05
11.50
.500 5 . - . . 5.0 .0 . .0 .0 . 0 . 0 0. 0. .
2.5000 2.0625 -0.66 0.25 4.53 5.00 0.13 6.93 6.42 0.12 0.12
16.11
5 .5 .0 - 5.0 .5 .0 .0 . .0 .0 .50 . 0 . 0. 0 .
2.2650 1.8125 -0.59 0.14 4.45 4.69 0.13 7.05 6.73 0.10 0.13
16.52
. 5 5 . 5 - . .5 .0 .0 . 0 .5 .0 . 0 . 0 . 0. .
2.6250 2.1250 -0.74 0.14 4.69 4.84 0.13 7.94 7.56 0.19 0.11
24.94
.000 .000 - . .0 0 .0 .0 .5 5 .0 .0 . 0 . 0 0 5. 0.0 . 0
1.6535 1.3386 -0.34 0.31 4.25 4.84 0.14 5.94 5.59 0.08 0.09
6.17
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 5 . 5 . 0000 0. . 000 000 . 0 000 HH HH
3.9360 8.4636 2.5511 142000 36700 20500 204000
00.000 5.000 .000 000 0. . 0 00 00 . 000 JP 00 A JP 00 0
3.9370 5.7087 0.9449 26100 6770 5480 38700
00.000 5.000 .000 000 0. . 0 00 00 . 000 JP 00 JP 00 0
3.9370 5.7087 0.9449 26100 6770 5480 38700
00.000 5.000 .000 000 0. . 0 00 00 . 000 JP 00 JP 00 0A
3.9370 5.7087 0.9449 26100 6770 5480 38700
00.000 50.000 .000 50000 0.50 . 0 000 500 . 000 JLM 00 JLM 00
3.9370 5.9055 1.2598 33800 8770 7530 54400
00.000 55.000 .000 000 0. . 55 00 5000 . 55000 JM 0 JM 0 0
3.9370 6.1024 1.4173 48200 12500 10100 79900
00.000 0.000 .5 0 000 0. . 5 00 00 . 000 5 X 5 0X
3.9370 6.2992 1.4375 46500 12100 9800 77000
00.000 0.000 .000 5 000 0. . 000 5 000 . 000 JHM 0 JHM 0 0
3.9370 6.2992 1.6142 58100 15100 12100 93500
00.000 0.000 .000 0000 0. .5 00 5 00 .5 5000
3.9370 7.0866 1.8898 72000 18700 12300 111000
00.000 0. 5 . 5 0000 0. .5 00 5 00 .5 5000
3.9370 7.1250 1.8750 72000 18700 12300 111000
00.000 00.000 5 . 000 0. 0. 5 500 0 000 0. 5 000 X
3.9370 7.8740 2.0772 84600 21900 23700 117000
00.000 5.000 . 0 0000 0. . 000 000 . 0 000 JHH JHH 5
3.9370 8.4646 2.6250 142000 36700 20500 204000
00.0 5 . .5 0 000 0. . 5 00 00 . 000 5 5
3.9375 6.1875 1.4375 46500 12100 9800 77000
00.0 . 5 .5 0 000 0. . 5 00 00 . 000 5 5
3.9375 6.3750 1.4375 46500 12100 9800 77000
00.0 . 5 . 0 000 0. . 5 00 00 . 000 5 5
3.9375 6.3750 1.5625 46500 12100 9800 77000
0 . 00 . 5. 5 0 00 0. . 5 00 0 .5 0 000 LL 05 LL 05 0
4.0000 5.3125 0.6250 13500 3500 2220 23400
0 . 00 .5 5 . 0500 0. . 500 00 .5 5000 L 0 L 0 0
4.0000 5.3750 0.8438 20400 5280 3330 39400
0 . 00 .050 . 00 0. .5 00 5500 . 5000 L5 5 L5 0
4.0000 5.7500 0.8438 20000 5180 3480 39400
0 . 00 .050 5. 00 000 0. . 00 00 . 0 000 LM 0 LM 0 0
4.0000 5.7500 1.0000 27400 7100 5580 45400
0 . 00 5 . 00 . 00 0. .5 00 5500 . 5000 L5 5 L5
4.0000 6.0000 0.8438 20000 5180 3480 39400
0 . 00 5 . .5 0 000 0. . 5 00 00 . 000 5 00 5
4.0000 6.1875 1.4375 46500 12100 9800 77000
0 . 00 5 . .5 0 000 0. . 5 00 00 . 000 5 0 5
4.0000 6.1875 1.4375 46500 12100 9800 77000
0 . 00 0.000 .5 0 000 0. . 5 00 00 . 000 5 00 5 0X
4.0000 6.2992 1.4375 46500 12100 9800 77000
0 . 00 . 5 .5 0 000 0. . 5 00 00 . 000 5 00 5
4.0000 6.3750 1.4375 46500 12100 9800 77000
0 . 00 . 5 . 0 000 0. . 5 00 00 . 000 5 00 5
4.0000 6.3750 1.5625 46500 12100 9800 77000
0 . 00 . 5 . 5 5000 0. . 500 5 00 . 000
4.0000 6.6250 1.6250 55100 14300 11500 86700
0 . 00 . 5 . 5 5000 0. . 500 5 00 . 000 A
4.0000 6.6250 1.6250 55100 14300 11500 86700
0 . 00 . 50 . 5 5000 0. . 500 5 00 . 000
4.0000 6.7500 1.6250 55100 14300 11500 86700
B
Caption:
Caption:
C
D
B
d
a
B 50 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 5 50. 00 - . .5 0.0 .0 . 0 .0 .0 . 0 . 0 . 0. . 0
2.6250 2.0000 -0.74 0.14 4.72 4.88 0.13 7.92 7.56 0.19 0.11
24.91
.500 .500 . 5.0 0 .0 .0 .0 0.0 .0 . 0 . 0 0 0. 0. .
0.8858 0.6890 0.24 0.20 4.17 4.57 0.12 5.51 5.28 0.08 0.13
2.49
.500 .500 . .0 0 .0 .0 .0 0.0 .0 . 0 . 0 0 0. 0. .
0.8858 0.6890 0.24 0.12 4.17 4.41 0.12 5.51 5.28 0.08 0.13
2.49
.500 .500 . .0 0 .0 .0 0. 0.0 .0 . 0 . 0 0 0. 0. . 5
0.8858 0.6890 0.24 0.12 4.17 4.41 0.03 5.51 5.35 0.08 0.13
2.54
0.000 .000 . . 0 .0 .0 . .0 5.0 . 0 0. 0 . 0. 05 .
1.1811 1.0236 0.18 0.09 4.21 4.37 0.09 5.67 5.31 0.09 0.04
3.99
5.000 .000 0. .0 0 .0 5.0 .5 .0 0.0 .00 .00 5 .5 0. 0 .
1.3780 1.1024 0.01 0.12 4.29 4.53 0.10 5.87 5.51 0.12 0.12
5.20
. . 5 -0.5 .5 0 .0 .0 .0 5 .0 .0 . 0 .50 5 . 0. 5 .5
1.4219 1.0313 -0.02 0.14 4.29 4.57 0.12 6.02 5.67 0.17 0.10
5.72
0.000 .000 - .5 .0 0 .0 .0 .5 5 .0 .0 . 0 . 0 5.5 0. 0 .
1.5748 1.2598 -0.10 0.12 4.30 4.61 0.10 6.06 5.63 0.13 0.14
6.60
.00 0.000 - . .5 .0 .0 .0 .0 0.0 . 0 . 0 . 0. 0 5.0
1.8900 1.5748 -0.32 0.14 4.37 4.65 0.12 6.61 6.30 0.14 0.05
11.23
.00 . 00 - . .5 .0 .0 . .0 .0 . 0 . 0 . 0. 0 5.
1.8900 1.5000 -0.32 0.14 4.37 4.65 0.13 6.61 6.34 0.14 0.05
11.30
. . 5 . .5 0.5 .0 . .0 .0 . 0 5. 0 0 . 0. . 5
1.9375 1.3750 0.05 0.14 4.75 4.96 0.13 7.40 6.85 0.34 0.21
15.11
. 5 5 . 5 - . .0 0.0 .0 . 0 .5 .0 . 0 . 0 . 0. .
2.6250 2.1250 -0.74 0.28 4.72 5.16 0.13 7.94 7.60 0.19 0.11
25.27
. . 5 -0.5 .5 0 .0 .0 . 5 .0 .0 . 0 .50 5 . 0. 5 . 5
1.4219 1.0313 -0.02 0.14 4.29 4.57 0.13 5.98 5.59 0.17 0.10
5.39
. . 5 -0.5 .5 0 .0 .0 . 5 .0 .0 . 0 .50 5 . 0. 5 .
1.4219 1.0313 -0.02 0.14 4.29 4.57 0.13 6.06 5.67 0.17 0.10
5.93
. . 0 -0.5 .5 0 .0 .0 . 5 .0 .0 . 0 .50 5 . 0. 5 .
1.4219 1.1563 -0.02 0.14 4.29 4.57 0.13 6.06 5.63 0.17 0.10
6.29
5.0 . 0 5. .5 0 .0 0 .0 .5 0.0 .0 . 0 . 0 5.5 . 0. 0.5
0.5938 0.4688 0.22 0.06 4.21 4.29 0.06 5.12 5.04 0.04 0.08
1.24
. . 0 . .5 0 .0 0 .0 .5 .0 .0 0. 0 . 0 0 0 0. 0.
0.8438 0.6563 0.11 0.06 4.21 4.29 0.06 5.20 5.04 0.03 0.06
1.86
. . 0 . .5 0 .0 .0 .5 .0 .0 0. 0 .50 5 0 0. .
0.8438 0.6563 0.19 0.06 4.29 4.41 0.06 5.55 5.35 0.03 0.06
2.56
5. 00 .050 . .5 0 .0 0.0 .5 .0 .0 .50 . 0 5 . 0. .
1.0000 0.7500 0.19 0.06 4.29 4.33 0.06 5.55 5.35 0.10 0.04
2.84
. . 0 . .5 0 .0 .0 .5 .0 .0 0. 0 .50 5 0 0. . 5
0.8438 0.6563 0.19 0.06 4.29 4.41 0.06 5.67 5.47 0.03 0.06
2.99
. . 5 -5. .5 .0 .0 . 5 .0 .0 . 0 .50 5 . 0. 5 .
1.4219 1.0313 -0.20 0.14 4.37 4.61 0.13 5.98 5.59 0.17 0.10
5.27
. . 5 -0.5 .0 .0 .0 . 5 .0 .0 . 0 .50 5 . 0. 5 .
1.4219 1.0313 -0.02 0.31 4.37 4.96 0.13 5.98 5.59 0.17 0.10
5.27
. . 5 -5. .5 .0 .0 .0 5 .0 .0 . 0 .50 5 . 0. 5 .5
1.4219 1.0313 -0.20 0.14 4.37 4.61 0.12 6.02 5.67 0.17 0.10
5.59
. . 5 -5. .5 .0 .0 . 5 .0 .0 . 0 .50 5 . 0. 5 .
1.4219 1.0313 -0.20 0.14 4.37 4.61 0.13 6.06 5.67 0.17 0.10
5.81
. . 0 -5. .5 .0 .0 . 5 .0 .0 . 0 .50 5 . 0. 5 . 0
1.4219 1.1563 -0.20 0.14 4.37 4.61 0.13 6.06 5.63 0.17 0.10
6.17
. 5 0. - . .5 .0 .0 . 0.0 .0 5.00 .00 . 0. 05 .
1.6250 1.1875 -0.11 0.14 4.41 4.65 0.13 6.30 5.87 0.20 0.08
7.42
. 5 . 5 - . .5 .0 .0 . 0.0 .0 5.00 .00 . 0. 05 .
1.6250 1.3750 -0.11 0.14 4.41 4.65 0.13 6.30 5.87 0.20 0.08
7.64
. 5 0. - . .5 .0 .0 . 0.0 50.0 5.00 .00 . 0. 05 .5
1.6250 1.1875 -0.11 0.14 4.41 4.65 0.13 6.30 5.91 0.20 0.08
7.81
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
0 . 00 . 00 . 5 5 000 . 0.5 0 00 00 0.50 000
LM 5 LM 0
0
0
5
HH A HH 0
HH HH 0
00
HH 5 HH 0
H 0 H 0 0
HH 5 HH
HH HH
LL5 5 LL5 0
50
XGA 0 X Y 0 X
5 5 50
LM LM 0
LL5 C LL5 0
L5 L5 0
L5 L5
5 5
LM5 5 LM5 5 0
0 0
5 5 5 50
4.0000 7.0000 1.3750 35500 9200 18400 49200
0 . 00 0.000 .000 0000 0. .5 00 5 00 .5 5000
B
Caption:
4.0000 7.0866 1.8898 72000 18700 12300 111000
0 . 00 0. 5 . 5 0000 0. .5 00 5 00 .5 5000
4.0000 7.1250 1.8750 72000 18700 12300 111000
0 . 00 0.500 5 . 50 000 0. . 0000 000 . 0000
4.0000 7.5000 2.2500 95300 24700 14200 142000
0 . 00 0.500 5 . 50 000 0. . 000 00 . 000
4.0000 7.5000 2.2500 111000 28800 16500 156000
0 . 00 0.500 5 . 50 000 0. . 000 00 . 000
Caption:
4.0000 7.5000 2.2500 111000 28800 16500 156000
0 . 00 00.000 5 . 000 0. 0. 5 500 0 000 0. 5 000
4.0000 7.8740 2.0772 84600 21900 23700 117000
0 . 00 . 5 . 5 5 0000 0. . 000 00 . 000
4.0000 8.3750 2.6250 119000 30900 17200 177000
0 . 00 . 5 . 5 0000 0. . 000 000 . 0 000
T
C
4.0000 8.3750 2.6250 142000 36700 20500 204000
0 . 00 . 55.5 5000 0. 0. 000 0000 0. 0000
4.0000 8.4375 2.1875 97800 25400 29300 137000
0 . 00 . 5 . 0000 0. . 000 000 . 0 000
D
4.0000 8.4636 2.5511 142000 36700 20500 204000
0 . 00 50. 5 . 00 000 0. 0 0. 000 0 000 0. 000
B
d
4.0000 9.8750 3.0000 145000 37700 45100 186000
0 . . 50 . 5 5000 0. . 500 5 00 . 000
4.0625 6.7500 1.6250 55100 14300 11500 86700
0 . 5 .0 5. 5 0 00 0. .5 5 00 0500 . 0 000
a
4.1250 5.5938 0.6250 13500 3510 2350 24000
0 . 5 0. 5 . 5 0000 0. .5 00 5 00 .5 5000
4.1250 7.1250 1.8750 72000 18700 12300 111000
0 . 5 0. 5 . 5 0000 0. .5 00 5 00 .5 5000
4.1250 7.1250 1.8750 72000 18700 12300 111000
0 . 5 0. 5 . 5 0000 0. .5 00 5 00 .5 5000
4.1250 7.1250 1.8750 72000 18700 12300 111000
0 . 5 0.500 . 5 000 0. . 00 00 . 0 5 000
4.1250 7.5000 1.8750 75700 19600 14000 122000
0 .000 0.000 5.000 0000 0. . 5 5 500 500 . 000
4.1732 6.2992 1.3780 47300 12300 9320 76200
0 . 5. 00 .5 0000 0.50 . 5 00 00 . 55000
4.1875 6.5000 1.4375 47100 12200 10400 79700
0 . 5 . 5 .500 5 000 0. . 000 00 . 5000
4.2116 5.7864 1.1220 35600 9220 4250 64100
0 . 50 .0 5. 5 0 00 0. .5 5 00 0500 . 0 000
4.2500 5.5938 0.6250 13500 3510 2350 24000
0 . 50 .050 . 00 0. .5 00 5500 . 5000
4.2500 5.7500 0.8438 20000 5180 3480 39400
0 . 50 5 . 00 . 00 0. .5 00 5500 . 5000
4.2500 6.0000 0.8438 20000 5180 3480 39400
0 . 50 5 . 50 .0 0 0 000 0. 0. 00 00 0. 000
4.2500 6.2500 0.9063 24000 6220 6450 40100
0 . 50 5 . . 5 000 0. 0 . 000 00 . 5 5 000
4.2500 6.2987 1.3750 40700 10600 7270 80300
0 . 50 . 5 . 5 000 0.5 . 00 00 . 0 000
4.2500 6.3750 1.3750 40000 10400 8970 69200
0 . 50 5. 00 .5 0000 0.50 . 5 00 00 . 55000
4.2500 6.5000 1.4375 47100 12200 10400 79700
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B 5 TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 50 .050 .5 . .0 .0 . .0 5 .0 . 0 . 0 . 0. 5 . 0
1.2500 0.7500 1.36 0.13 4.69 5.04 0.13 6.77 6.06 0.35 0.13
6.83
.00 0.000 - . .5 .0 .0 .0 .0 0.0 . 0 . 0 . 0. 0 5.00
1.8900 1.5748 -0.32 0.14 4.45 4.69 0.12 6.61 6.30 0.14 0.05
11.02
.00 . 00 - . .5 .0 .0 . .0 .0 . 0 . 0 . 0. 0 5.0
1.8900 1.5000 -0.32 0.14 4.45 4.69 0.13 6.61 6.34 0.14 0.05
11.08
5 .5 . 50 - 5. .0 .0 .0 . .0 0.0 5. 0 0. 0 . 0. 0 .
2.2650 1.7500 -0.60 0.31 4.49 5.08 0.13 6.85 6.69 0.22 0.02
14.97
5 .5 .0 - 5.0 .5 .0 .0 . .0 .0 .50 . 0 . 0. 0 .
2.2650 1.8125 -0.59 0.14 4.56 4.80 0.13 7.05 6.73 0.10 0.13
16.02
5 .5 .0 - 5.0 .0 .0 .0 . .0 .0 .50 . 0 . 0. 0 . 0
2.2650 1.8125 -0.59 0.31 4.56 5.16 0.13 7.05 6.73 0.10 0.13
15.88
. . 5 . .5 0.5 .0 . .0 .0 . 0 5. 0 0 . 0. .
1.9375 1.3750 0.05 0.14 4.75 5.04 0.13 7.40 6.85 0.34 0.21
14.89
. 5 5 . 5 - . .0 .0 0.0 . .0 .0 . 0 . 0 . 0. 5 0. 5
2.6250 2.1250 -0.78 0.28 4.61 5.12 0.13 7.60 7.36 0.26 0.05
24.13
. 5 5 . 5 - . .0 .0 .0 . 0 .5 .0 . 0 . 0 . 0. .00
2.6250 2.1250 -0.74 0.28 4.76 5.20 0.13 7.94 7.56 0.19 0.11
24.26
5 . . . .5 .0 .0 . 05.0 .0 . 0 . 0 . 0. . 5
2.0625 1.5625 0.27 0.14 5.04 5.20 0.13 8.07 7.32 0.26 0.13
19.72
. 5 50. 00 - . .0 .0 .0 . 0 .0 .0 . 0 . 0 . 0. .
2.6250 2.0000 -0.74 0.28 4.76 5.20 0.13 7.92 7.56 0.19 0.11
24.51
.0 5 50. 00 - . . .0 .0 . .0 0.0 5. 0 . 0 5. 0. 0 .0
2.8750 2.0000 -0.13 0.25 5.15 5.87 0.13 9.01 8.27 0.60 0.18
37.64
. 5 0. - . .5 .5 .0 . 0.0 50.0 5.00 .00 . 0. 05 .
1.6250 1.1875 -0.11 0.14 4.46 4.84 0.13 6.30 5.91 0.20 0.08
7.62
5.0 . 0 . .5 .0 .0 .5 .0 5.0 0. 0 . 0 05 0 0. 0.
0.5938 0.4688 0.29 0.06 4.37 4.45 0.06 5.39 5.31 0.03 0.09
1.50
.00 . 00 - . .5 .0 .0 . .0 .0 . 0 . 0 . 0. 0 .
1.8900 1.5000 -0.32 0.14 4.57 4.80 0.13 6.61 6.34 0.14 0.05
10.66
.00 . 00 - . . .0 .0 . .0 .0 . 0 . 0 . 0. 0 . 0
1.8900 1.5000 -0.32 0.25 4.57 5.04 0.13 6.61 6.34 0.14 0.05
10.58
.00 . 00 - . .0 .0 .0 . .0 .0 . 0 . 0 . 0. 0 .
1.8900 1.5000 -0.32 0.28 4.57 5.08 0.13 6.61 6.34 0.14 0.05
10.54
. . 5 - . .5 .0 .0 . .0 .0 5. 0 .50 5. 0. 5 5.
1.9375 1.3750 -0.26 0.14 4.65 4.88 0.13 7.13 6.73 0.21 0.06
12.74
5.000 .000 -0. .0 5.0 .0 .0 5 .0 .0 . 0 . 0 50. 0. 0 .
1.3780 1.0236 -0.01 0.24 4.53 5.04 0.08 6.06 5.79 0.13 0.10
5.19
.5 . .0 .5 .0 .0 . 5 .0 .0 .00 .50 . 0. 5 .
1.4375 1.0625 0.08 0.14 4.57 4.80 0.13 6.26 5.87 0.16 0.06
5.91
.000 .000 - . . .0 .0 . .0 .0 0. 0 . 0 5 5. 0. 0 .
1.1024 0.9449 -0.15 0.09 4.41 4.57 0.09 5.59 5.43 0.02 0.09
2.90
5.0 . 0 . .5 .0 5.0 .5 .0 5.0 0. 0 . 0 05 0 0. 0.
0.5938 0.4688 0.29 0.06 4.45 4.53 0.06 5.39 5.31 0.03 0.09
1.37
. . 0 . .5 .0 .0 .5 .0 .0 0. 0 .50 5 0 0. 0.
0.8438 0.6563 0.19 0.06 4.49 4.57 0.06 5.55 5.35 0.03 0.06
2.17
. . 0 . .5 .0 .0 .5 .0 .0 0. 0 .50 5 0 0. .
0.8438 0.6563 0.19 0.06 4.49 4.57 0.06 5.67 5.47 0.03 0.06
2.60
. 5. 5 . .5 5.0 .0 . 5 .0 .0 . 0 .00 5 0. . 5
0.8440 0.6250 0.54 0.14 4.53 4.80 0.13 5.98 5.63 0.10 0.12
2.98
. 5 . - .5 .5 .0 .0 . 5 .0 .0 .50 . 0 . 0. 5 .
1.3750 1.0625 -0.06 0.14 4.57 4.80 0.13 6.06 5.75 0.10 0.05
5.17
. 5 . . .5 .0 .0 . 5 .0 .0 . 0 0. 0 0 . 0. 55 . 5
1.3750 1.0625 0.15 0.14 4.57 4.80 0.13 6.14 5.75 0.11 0.03
5.17
.5 . .0 .5 .0 .0 . 5 .0 .0 .00 .50 . 0. 5 . 0
1.4375 1.0625 0.08 0.14 4.61 4.84 0.13 6.26 5.87 0.16 0.06
5.74
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
0 . 50 5. 00 .5 0000 0.50 . 5 00 00 . 55000 5 5 50
4.2500 6.5000 1.4375 47100 12200 10400 79700
0 . 50 . 5 .5 0000 0.50 . 5 00 00 . 55000 5 5 5
4.2500 6.6250 1.4375 47100 12200 10400 79700
0 . 50 . 50 .000 000 0. . 00 00 . 000 5 5
4.2500 6.7500 1.3386 41000 10600 8600 60300
0 . 50 0.500 . 5 000 0. . 00 00 . 0 5 000 5 50
4.2500 7.5000 1.8750 75700 19600 14000 122000
0 . 50 . 5 . 5 5 0000 0. . 000 00 . 000
4.2500 8.3750 2.6250 119000 30900 17200 177000
0 . 50 . 5 . 5 0000 0. . 000 000 . 0 000 HH 0 HH 0
4.2500 8.3750 2.6250 142000 36700 20500 204000
0 .5 5 . 50 .0 0 0 000 0. 0. 00 00 0. 000 5
4.3125 6.2500 0.9063 24000 6220 6450 40100
0 .5 5 . 50 .0 0 0 000 0. 0. 00 00 0. 000 A 5
4.3125 6.2500 0.9063 24000 6220 6450 40100
0 . 5 0.500 . 5 000 0. . 00 00 . 0 5 000 50
4.3288 7.5000 1.8750 75700 19600 14000 122000
0 . 5 . . 5 5 000 0.5 . 5 00 5 00 . 000 0
4.3297 7.0856 1.6250 57200 14800 13100 94200
0.000 . 55.5 5000 0. 0. 000 0000 0. 0000 H 0 H 0 0
4.3301 8.4375 2.1875 97800 25400 29300 137000
0 . 5 . . 5 000 0. 0 . 000 00 . 5 5 000 LM5 5 LM5 5 0
4.3302 6.2987 1.3750 40700 10600 7270 80300
0 . 5 . . 5 000 0. 0 . 000 00 . 5 5 000 LM5 5 LM5 5 0
4.3302 6.2987 1.3750 40700 10600 7270 80300
0 . . 00 . 5 5 000 0.5 . 5 00 5 00 . 000 00
4.3304 7.0000 1.6250 57200 14800 13100 94200
0.000 5.000 5.000 0000 0.50 . 5 500 00 . 5 000 JM 0 JM 0 0
4.3307 6.4961 1.3780 47300 12300 10400 80100
0.000 0.000 .000 000 0. . 00 00 . 55 000 JHM5 A JHM5 0
4.3307 7.0866 1.8504 77300 20000 13900 125000
0.000 . 5 . 5 5 0000 0. . 000 00 . 000
4.3307 8.3750 2.6250 119000 30900 17200 177000
0.000 5.000 .500 50 000 0. . 0000 000 . 5 000 XFA Y
4.3307 8.4646 2.4213 113000 29300 21800 169000
0. . 50 .000 000 0. . 00 00 . 000 5
4.3438 6.7500 1.3386 41000 10600 8600 60300
. 5 . 50 .000 000 0. . 00 00 . 000 5
4.3750 6.7500 1.3386 41000 10600 8600 60300
. 5 0.500 . 5 000 0. . 00 00 . 0 5 000 50
4.3750 7.5000 1.8750 75700 19600 14000 122000
. 5 . 55.5 5000 0. 0. 000 0000 0. 0000 H 0 5 H 0 0
4.3750 8.4375 2.1875 97800 25400 29300 137000
. 00 5 . 00 . 00 0. . 5 00 00 . 000 L L 0
4.5000 6.0000 0.8438 20800 5380 3810 42300
. 00 . 00 . 5 5 000 0.5 . 5 00 5 00 . 000 50 00
4.5000 7.0000 1.6250 57200 14800 13100 94200
. 00 .000 . 5 5 000 0.5 . 5 00 5 00 . 000 50 0 X
4.5000 7.0079 1.6250 57200 14800 13100 94200
. 00 . . 5 5 000 0.5 . 5 00 5 00 . 000 50 0
4.5000 7.0856 1.6250 57200 14800 13100 94200
. 00 0. 5 . 5 5 000 0.5 . 5 00 5 00 . 000 50
4.5000 7.1250 1.6250 57200 14800 13100 94200
. 00 0.500 . 5 000 0. . 00 00 . 0 5 000 50 50
4.5000 7.5000 1.8750 75700 19600 14000 122000
B
Caption:
Caption:
C
D
B
d
a
B 5 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.5 . .0 .0 .0 .0 . 5 .0 .0 .00 .50 . 0. 5 .5
1.4375 1.0625 0.08 0.31 4.61 5.20 0.13 6.26 5.87 0.16 0.06
5.59
.5 . .0 .5 .0 .0 . .0 5 .0 .00 .50 . 0. 5 .
1.4375 1.0625 0.08 0.14 4.61 4.84 0.13 6.34 5.94 0.16 0.06
6.13
0. 5. . .5 .0 .0 . .0 5 .0 . 0 . 0 5 50.5 0.0 .5
1.1875 0.9948 0.18 0.14 4.57 4.84 0.13 6.46 6.14 0.13 0.08
5.53
. . 5 - . .5 0.0 .0 . .0 .0 5. 0 .50 5. 0. 5 5.5
1.9375 1.3750 -0.26 0.14 4.72 4.96 0.13 7.13 6.73 0.21 0.06
12.29
. 5 5 . 5 - . .0 .0 .0 . .0 .0 . 0 . 0 . 0. 5 0.
2.6250 2.1250 -0.78 0.31 4.80 5.39 0.13 7.60 7.36 0.26 0.05
22.89
. 5 5 . 5 - . .0 .0 .0 . 0 .5 .0 . 0 . 0 . 0. 0.
2.6250 2.1250 -0.74 0.31 4.96 5.47 0.13 7.94 7.56 0.19 0.11
23.01
. 5. 5 . .5 .0 .0 . 5 .0 .0 . 0 .00 . 0. .
0.8440 0.6250 0.54 0.14 4.57 4.84 0.13 5.98 5.63 0.10 0.12
2.88
. 5. 5 . 5.0 .0 .0 . 5 .0 .0 . 0 .00 5 0. . 0
0.8440 0.6250 0.54 0.20 4.61 4.96 0.13 5.98 5.63 0.10 0.12
2.87
. . 5 - . .5 .0 .0 . .0 .0 5. 0 .50 5. 0. 5 5.
1.9375 1.3750 -0.26 0.14 4.80 5.04 0.13 7.13 6.73 0.21 0.06
12.00
. 5 0. . .5 .0 .0 . .0 .0 5. 0 .00 5. 0. 5 .
1.6250 1.1875 0.05 0.14 4.76 5.04 0.13 6.81 6.34 0.21 0.08
8.50
5 . . . .5 .0 .0 . 05.0 .0 . 0 . 0 . 0. .
2.0625 1.5625 0.27 0.14 5.16 5.47 0.13 8.07 7.32 0.26 0.13
18.46
. 5 . - .5 .0 .0 .0 . 5 .0 .0 .50 . 0 . 0. 5 .
1.3750 1.0625 -0.06 0.31 4.65 5.24 0.13 6.06 5.75 0.10 0.05
4.80
. 5 . - .5 .5 .0 .0 . 5 .0 .0 .50 . 0 . 0. 5 . 5
1.3750 1.0625 -0.06 0.14 4.65 4.88 0.13 6.06 5.75 0.10 0.05
4.96
. 5 0. . .5 .0 .0 . .0 0.0 5. 0 .00 5. 0. 5 .
1.6250 1.1875 0.05 0.14 4.76 5.04 0.13 6.77 6.30 0.21 0.08
8.18
5.000 .500 .0 .0 .0 5.0 .5 5 .0 .0 .00 .00 5. 0. 5 5 .
1.3780 1.0433 0.12 0.12 4.69 4.92 0.10 6.26 5.87 0.12 0.08
5.38
.000 .000 -5. .0 .0 .0 .5 .0 .0 . 0 . 0 5 5 . 0. .5
1.8110 1.4961 -0.23 0.28 4.80 5.43 0.10 6.77 6.38 0.10 0.15
10.13
. 5 5 . 5 - . . .0 .0 . .0 .0 . 0 . 0 . 0. 5 0. 5
2.6250 2.1250 -0.78 0.25 4.88 5.35 0.13 7.60 7.36 0.26 0.05
22.59
5 .000 50.000 - . .0 .0 .0 .5 0 .0 .0 . 0 .00 5 . 0. 5 . 5
2.2835 1.9685 -0.37 0.12 5.24 5.39 0.10 8.03 7.56 0.31 0.12
21.72
0. 5. . .5 .0 .0 . .0 5 .0 . 0 . 0 5 50.5 0.0 .
1.1875 0.9948 0.18 0.14 4.65 4.88 0.13 6.46 6.14 0.13 0.08
5.32
0. 5. . .5 .0 5.0 . .0 5 .0 . 0 . 0 5 50.5 0.0 .
1.1875 0.9948 0.18 0.14 4.69 4.92 0.13 6.46 6.14 0.13 0.08
5.25
. . 5 - . .5 .0 .0 . .0 .0 5. 0 .50 5. 0. 5 5.
1.9375 1.3750 -0.26 0.14 4.84 5.08 0.13 7.13 6.73 0.21 0.06
11.82
5 . . . .5 .0 .0 . 05.0 .0 . 0 . 0 . 0. .
2.0625 1.5625 0.27 0.14 5.16 5.47 0.13 8.07 7.32 0.26 0.13
18.28
. . 0 . .5 0.0 .0 .5 .0 .0 . 0 . 0 0 0. .05
0.8438 0.6563 0.25 0.06 4.72 4.84 0.06 5.79 5.63 0.04 0.06
2.31
. 5 0. . .5 5.0 .0 . .0 0.0 5. 0 .00 5. 0. 5 .
1.6250 1.1875 0.05 0.14 4.92 5.16 0.13 6.77 6.30 0.21 0.08
7.64
. 5 0. . .5 5.0 .0 .0 .0 0.0 5. 0 .00 5. 0. 5 .
1.6250 1.1875 0.05 0.14 4.92 5.16 0.12 6.77 6.30 0.21 0.08
7.68
. 5 0. . .5 5.0 .0 . .0 .0 5. 0 .00 5. 0. 5 .
1.6250 1.1875 0.05 0.14 4.92 5.16 0.13 6.81 6.34 0.21 0.08
7.96
. 5 0. . .5 5.0 .0 . .0 .0 5. 0 .00 5. 0. 5 .
1.6250 1.1875 0.05 0.14 4.92 5.16 0.13 6.81 6.34 0.21 0.08
8.11
. . 5 - . .5 5.0 .0 . .0 .0 5. 0 .50 5. 0. 5 5. 5
1.9375 1.3750 -0.26 0.14 4.92 5.20 0.13 7.13 6.73 0.21 0.06
11.34
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 55
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 00 0 . 5 . 5 5 0000 0. . 000 00 . 000 0
4.5000 8.1250 2.6250 119000 30900 17200 177000
. 00 . 5 . 5 5 0000 0. . 000 00 . 000
4.5000 8.3750 2.6250 119000 30900 17200 177000
. 00 . 5 . 5 0000 0. . 000 000 . 0 000 HH HH 0
4.5000 8.3750 2.6250 142000 36700 20500 204000
. 00 . 5 . 0000 0. . 000 000 . 0 000 HH HH
4.5000 8.4636 2.5511 142000 36700 20500 204000
. 00 . 00 5 . 5 5 000 0. 0. 000 50000 0. 000 HM 0 HM 0
4.5000 9.0000 2.1250 103000 26700 33700 151000
. 00 .050 .550 000 0. 0. 5 000 000 0. 0 0000 HH HH 0
4.5000 10.7500 3.2500 187000 48500 52500 243000
. 00 . 00 .550 000 0. 0. 5 000 000 0. 0 0000 HH HH
4.5000 11.0000 3.2500 187000 48500 52500 243000
. 5 . 00 . 5 5 000 0.5 . 5 00 5 00 . 000 5 A 00
4.5266 7.0000 1.6250 57200 14800 13100 94200
. 5 . . 5 5 000 0.5 . 5 00 5 00 . 000 5 0
4.5266 7.0856 1.6250 57200 14800 13100 94200
. 5 0. 5 . 5 5 000 0.5 . 5 00 5 00 . 000 5 A
4.5266 7.1250 1.6250 57200 14800 13100 94200
. 5 . 5 . 5 0000 0. . 000 000 . 0 000 HH HH 0
4.5266 8.3750 2.6250 142000 36700 20500 204000
5.000 5.000 .000 000 0. . 00 0 00 . 5000 JLM JLM
4.5276 6.4961 1.1024 33200 8620 6770 55100
5.000 .000 0.000 5 000 0.5 . 5 00 5 00 . 000 5 X 0 X
4.5276 7.0079 1.5748 57200 14800 13100 94200
5.0 0.500 . 5 000 0. . 00 00 . 0 5 000 5 50
4.5310 7.5000 1.8750 75700 19600 14000 122000
5.0 0.500 . 5 000 0. . 00 00 . 0 5 000 55 50
4.5310 7.5000 1.8750 75700 19600 14000 122000
. 5 . . 5 000 0.50 . 00 00 . 000 0
4.6250 7.0856 1.3750 40700 10600 8980 61000
. 5 0. 5 . 5 000 0.50 . 00 00 . 000
4.6250 7.1250 1.3750 40700 10600 8980 61000
. 5 0. 5 . 5 000 0.50 . 00 00 . 000
4.6250 7.1250 1.3750 40700 10600 8980 61000
. 5. 00 . 5 5 000 0. . 00 500 . 0 000 50
4.7230 8.5000 1.8750 79500 20600 17200 138000
. 5 . 5 5. 0 000 0. . 0 5 00 00 . 000 M M 0
4.7234 6.8750 1.4063 50900 13200 7510 94900
0.000 0.000 5. 00 000 0. . 00 00 . 000 JL JL
4.7244 6.6929 1.0000 30200 7820 6140 52000
0.000 0.000 .000 5 000 0. . 00 00 . 000 JP 0 A JP 0 0
4.7244 6.6929 1.0630 34400 8920 7220 53500
0.000 0.000 .000 5 000 0. . 00 00 . 000 JP 0 JP 0 0
4.7244 6.6929 1.0630 34400 8920 7220 53500
0.000 0.000 .000 000 0. . 5 5 00 00 . 000 JM JM 0
4.7244 7.0866 1.4173 51400 13300 9430 84700
0.000 0.000 .000 000 0. . 0 00 55 00 . 000 XAA 0 X Y 0 X
4.7244 7.0866 1.4961 60900 15800 12400 105000
0.000 5. 00 . 5 5 000 0. . 00 500 . 0 000 X 50
4.7244 8.5000 1.8750 79500 20600 17200 138000
0.000 0.000 5 . 5 000 0. 0. 0 00 000 0. 000 X 05X
4.7244 9.0551 2.1250 78300 20300 25600 109000
0. 50 . 5 . 500 0. . 5 00 00 . 0 000 L 5 L 5
4.7500 6.3750 0.8438 21900 5680 4230 46400
B
Caption:
Caption:
C
D
B
d
a
B 5 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 5 5 . 5 - . .0 .0 .0 . .0 .0 . 0 . 0 . 0. 5 .
2.6250 2.1250 -0.78 0.28 5.04 5.55 0.13 7.60 7.24 0.26 0.05
19.66
. 5 5 . 5 - . .0 .0 .0 . .0 .0 . 0 . 0 . 0. 5 .
2.6250 2.1250 -0.78 0.28 5.04 5.55 0.13 7.60 7.36 0.26 0.05
21.64
. 5 5 . 5 - . .0 .0 .0 . 0 .5 .0 . 0 . 0 . 0. .
2.6250 2.1250 -0.74 0.28 5.16 5.63 0.13 7.94 7.56 0.19 0.11
21.77
. 5 50. 00 - . .0 .0 .0 . 0 .0 .0 . 0 . 0 . 0. .
2.6250 2.0000 -0.74 0.28 5.16 5.63 0.13 7.92 7.56 0.19 0.11
22.02
. . 00 .5 .5 .0 .0 . .0 00.0 .00 . 0 5 0. .5
1.9460 1.5000 0.53 0.14 5.59 5.75 0.13 8.63 7.87 0.36 0.25
21.04
.550 5 . 5 - . . .5 .0 . 5 .0 0.0 5. 0 . 0 . 0. .
3.2500 2.1250 -0.26 0.25 5.80 6.46 0.25 9.97 9.06 0.60 0.16
48.32
.550 5 . 5 - . . .5 .0 . 5 .0 .0 5. 0 . 0 . 0. .0
3.2500 2.1250 -0.26 0.25 5.80 6.46 0.25 9.97 9.17 0.60 0.16
50.88
. 5 0. . .0 .0 .0 . .0 0.0 5. 0 .00 5. 0. 5 .
1.6250 1.1875 0.05 0.35 4.96 5.63 0.13 6.77 6.30 0.21 0.08
7.34
. 5 0. . .5 .0 .0 . .0 .0 5. 0 .00 5. 0. 5 .5
1.6250 1.1875 0.05 0.14 4.96 5.20 0.13 6.81 6.34 0.21 0.08
7.87
. 5 0. . .0 .0 .0 . .0 .0 5. 0 .00 5. 0. 5 .5
1.6250 1.1875 0.05 0.35 4.96 5.63 0.13 6.81 6.34 0.21 0.08
7.80
. 5 5 . 5 - . .0 .0 .0 . 0 .5 .0 . 0 . 0 . 0. .
2.6250 2.1250 -0.74 0.28 5.16 5.67 0.13 7.94 7.56 0.19 0.11
21.63
.000 .000 5. . .0 .0 .0 5 .0 5 .0 . 0 . 0 5 . 0. .
1.0630 0.8268 0.22 0.13 4.76 5.00 0.12 6.22 5.94 0.09 0.09
3.87
0.000 0. . .5 5.5 .0 .0 .0 0.0 .00 .00 5. 0. 5 .
1.5748 1.1875 0.05 0.14 4.95 5.20 0.12 6.77 6.30 0.16 0.08
7.44
. . 5 - . .5 .0 .0 . .0 .0 5. 0 .50 5. 0. 5 5.0
1.9375 1.3750 -0.26 0.14 4.96 5.24 0.13 7.13 6.73 0.21 0.06
11.22
. . 5 - . .0 .0 .0 . .0 .0 5. 0 .50 5. 0. 5 5.0
1.9375 1.3750 -0.26 0.31 4.96 5.55 0.13 7.13 6.73 0.21 0.06
11.06
. 50 5. 00 5. .5 5.0 .0 0. .0 5.0 5. 0 . 0 5 . 0. 0 .
1.2500 1.0000 0.21 0.14 4.92 5.20 0.03 6.77 6.50 0.20 0.09
5.96
. 50 5. 00 5. .5 5.0 .0 . .0 .0 5. 0 . 0 5 . 0. 0 .
1.2500 1.0000 0.21 0.14 4.92 5.20 0.13 6.77 6.42 0.20 0.09
6.04
. 50 5. 00 5. .0 5.0 0.0 . .0 .0 5. 0 . 0 5 . 0. 0 .
1.2500 1.0000 0.21 0.31 4.92 5.51 0.13 6.77 6.42 0.20 0.09
5.87
. 5 . 5 . .5 .0 .0 . 0 .0 .0 . 0 .00 .5 0. .5
1.8750 1.3750 0.09 0.14 5.35 5.59 0.13 8.19 7.72 0.19 0.08
16.57
.5 . - . .5 .0 .0 .5 .0 .0 . 0 0.50 . 0. 5 5 . 0
1.4375 1.0938 -0.14 0.14 5.08 5.28 0.06 6.61 6.38 0.15 0.02
5.96
5. 00 .050 . . .0 .0 . .0 5 .0 . 0 . 0 0 0. 0. .
1.0000 0.7500 0.31 0.13 5.00 5.20 0.13 6.42 6.14 0.11 0.05
3.56
5.000 .500 . .0 .0 .0 .0 .0 5 .0 . 0 . 0 5 . 0. 5 . 0
0.9843 0.7677 0.31 0.24 5.00 5.47 0.12 6.46 6.22 0.11 0.14
3.53
5.000 .500 . .0 .0 .0 .0 .0 5 .0 . 0 . 0 5 . 0. 5 .
0.9843 0.7677 0.31 0.12 5.00 5.24 0.12 6.46 6.22 0.11 0.14
3.58
.000 .000 0.0 .5 .0 5.0 .5 .0 .0 . 0 . 0 . 0. 0 .
1.4173 1.0236 0.00 0.14 5.04 5.31 0.06 6.81 6.54 0.14 0.10
6.46
.000 .000 .5 5.0 0.0 .0 .0 .0 5.0 .50 .00 55 5 . 0. .
1.4961 1.1417 0.06 0.20 5.12 5.55 0.08 6.85 6.50 0.14 0.12
7.19
. 5 . 5 . .0 .0 .0 . 0 .0 .0 . 0 .00 .5 0. .5
1.8750 1.3750 0.09 0.16 5.39 5.67 0.13 8.19 7.72 0.19 0.08
16.55
. . 00 . .5 0.0 5.0 . .0 .0 . 0 . 0 . 0. .
1.9460 1.5000 0.52 0.14 5.51 5.71 0.13 8.38 7.80 0.32 0.19
19.66
. . 0 . .5 .0 .0 .5 5 .0 5 .0 . 0 . 0 5 0. 50 .
0.8438 0.6563 0.33 0.06 5.00 5.08 0.06 6.14 5.94 0.05 0.06
2.66
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
0. 50 . 5. 00 000 0. . 00 00 . 000 L L 0
4.7500 6.5625 1.0000 30200 7820 6140 52000
0. 50 . 5. 00 000 0. . 0 00 500 . 000 L 5 L 5 0
4.7500 6.6875 1.0000 29700 7710 4390 61400
0. 50 . 5. 0 000 0. . 0 5 00 00 . 000 M M
4.7500 6.7812 1.4063 50900 13200 7510 94900
0. 50 . 5 5. 0 000 0. . 0 5 00 00 . 000 M M 0
4.7500 6.8750 1.4063 50900 13200 7510 94900
0. 50 . 5 5. 0 000 0. . 0 5 00 00 . 000 M M
4.7500 6.8750 1.4063 50900 13200 7510 94900
0. 50 0. 5 5. 00 000 0. . 0 00 500 . 000 L 5 L 5
4.7500 7.1250 1.0000 29700 7710 4390 61400
0. 50 .5 . 000 0. . 00 00 . 000 0
4.7500 7.1875 1.5625 55800 14500 7550 111000
0. 50 0.500 .0 5000 0. . 00 00 . 5 000 HM HM 0
4.7500 7.5000 1.8125 75300 19500 14300 122000
0. 50 . .0 5000 0. . 00 00 . 5 000 HM HM
4.7500 7.8730 1.8125 75300 19500 14300 122000
0. 50 0 . 5 . 5 50000 0. . 0 00 00 . 5 000 5
4.7500 8.1250 1.8750 78700 20400 16000 133000
0. 50 . 50 .500 5 000 0. . 5 000 5500 .5 000 5 5 5 5
4.7500 9.2500 2.5000 131000 33900 21500 209000
0. 50 5 .000 . 000 0. . 000 0000 . 0000 HH 0 HH 0
4.7500 10.0000 3.0625 189000 49100 27000 279000
0. 50 5 . . 000 0. . 000 0000 . 0000 HH 0 HH
4.7500 10.2352 3.0625 189000 49100 27000 279000
0. 50 .050 .550 000 0. 0. 5 000 000 0. 0 0000 HH HH 0
4.7500 10.7500 3.2500 187000 48500 52500 243000
. 5 .5 . 000 0. . 00 00 . 000 0
4.8750 7.1875 1.5625 55800 14500 7550 111000
. . 50 .500 5 000 0. . 5 000 5500 .5 000 5 5 5
4.9190 9.2500 2.5000 131000 33900 21500 209000
5.000 5.000 5. 00 000 0. . 000 00 . 000 JL 5 JL 5
4.9213 6.8898 1.0000 31200 8100 6600 55300
5. . 00 5 . 5 5 000 0. 0. 000 50000 0. 000 HM 5 HM 0
4.9330 9.0000 2.1250 103000 26700 33700 151000
.000 5. 5 . 5 500 0. . 0 00 00 . 5 000 LL 5 LL 5 0
5.0000 6.5313 0.7188 18800 4870 2770 34400
.000 . 5. 00 000 0. . 0 00 500 . 000 L 5 L 5 0
5.0000 6.6875 1.0000 29700 7710 4390 61400
.000 . 50 5. 00 000 0. . 000 00 . 000 L 5 L 5
5.0000 6.7500 1.0000 31200 8100 6600 55300
.000 . 5 .5 0 000 0. . 5 5 00 00 . 0 000 LM 5 LM 5
5.0000 6.8750 1.4375 45800 11900 6250 92900
.000 0. 5 5. 00 000 0. . 0 00 500 . 000 L 5 L 5
5.0000 7.1250 1.0000 29700 7710 4390 61400
.000 .5 . 000 0. . 00 00 . 000 0 0
5.0000 7.1875 1.5625 55800 14500 7550 111000
.000 . 50 .0 0000 0. . 00 5 000 . 0 5000
5.0000 7.7500 1.8125 76500 19800 11700 141000
.000 0 . 00 .0 0000 0. . 00 5 000 . 0 5000 0
5.0000 8.0000 1.8125 76500 19800 11700 141000
.000 5. 00 . 5 5 000 0. . 00 500 . 0 000 500 50
5.0000 8.5000 1.8750 79500 20600 17200 138000
.000 . 00 5 . 5 000 0. 0. 0 00 000 0. 000 500 00
5.0000 9.0000 2.1250 78300 20300 25600 109000
B
Caption:
Caption:
C
D
B
d
a
B 5 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
5. 00 .050 . . .0 .0 . .0 5 .0 . 0 . 0 0 0. 0. .
1.0000 0.7500 0.31 0.13 5.04 5.24 0.13 6.34 6.06 0.11 0.05
3.27
. 5 0. .5 .5 .0 .0 .5 .0 0.0 0. 0 . 0 5 0. 5 .
1.0313 0.8125 0.10 0.06 5.08 5.16 0.06 6.46 6.30 0.03 0.06
4.11
.5 . - . .5 .0 5.0 .5 .0 .0 . 0 0.50 . 0. 5 5 .5
1.4375 1.0938 -0.14 0.14 5.08 5.31 0.06 6.57 6.38 0.15 0.02
5.57
.5 . - . .5 .0 5.0 .5 .0 .0 . 0 0.50 . 0. 5 5 .
1.4375 1.0938 -0.14 0.14 5.08 5.31 0.06 6.61 6.38 0.15 0.02
5.88
.5 . - . .5 .0 5.0 . .0 .0 . 0 0.50 . 0. 5 5 .
1.4375 1.0938 -0.14 0.14 5.08 5.31 0.13 6.61 6.34 0.15 0.02
5.88
. 5 0. .5 .5 .0 .0 .5 .0 .0 0. 0 . 0 5 0. 5 . 5
1.0313 0.8125 0.10 0.06 5.08 5.16 0.06 6.54 6.46 0.03 0.06
5.18
. 00 . -5. .5 .0 .0 . .0 .0 . 0 . 0 5 . 0. .
1.5000 1.3125 -0.22 0.14 5.16 5.39 0.13 6.93 6.61 0.07 0.13
8.03
.0 . 5 - . .5 .0 .0 .5 .0 .0 . 0 . 0 5 .5 0. . 0
1.8125 1.3750 -0.15 0.14 5.20 5.43 0.06 7.24 6.85 0.15 0.10
10.15
.0 . 5 - . .5 .0 .0 .5 5.0 .0 . 0 . 0 5 .5 0. 5. 0
1.8125 1.3750 -0.15 0.14 5.20 5.43 0.06 7.28 7.01 0.15 0.10
11.90
. 5 . 5 - . . .0 .0 . .0 .0 5. 0 . 0 5 . 0. .
1.8750 1.3750 -0.07 0.13 5.28 5.47 0.13 7.80 7.32 0.21 0.11
13.94
.500 . - .0 . .0 .0 . .0 0 .0 . 0 . 0 5 5 . 0. . 5
2.5000 1.9375 -0.55 0.25 5.39 5.87 0.13 8.54 8.23 0.25 0.15
27.22
.550 . - . . .0 5 .0 . .5 .0 . 0 0.00 5 0 . 0. .50
3.2500 2.4375 -0.92 0.38 5.59 6.22 0.25 9.20 8.78 0.28 0.00
40.79
.550 . - . . .0 5 .0 .0 .5 .0 . 0 0.00 5 0 . 0. .
3.2500 2.4375 -0.92 0.38 5.59 6.22 0.16 9.20 8.98 0.28 0.00
43.52
.550 5 . 5 - . . .5 .0 . 5 .0 0.0 5. 0 . 0 . 0. .
3.2500 2.1250 -0.26 0.25 5.80 6.61 0.25 9.97 9.06 0.60 0.16
46.65
. 00 . -5. .5 .0 .0 . .0 .0 . 0 . 0 5 . 0. .
1.5000 1.3125 -0.22 0.14 5.24 5.47 0.13 6.93 6.61 0.07 0.13
7.63
.500 . - .0 . 0.0 5 .0 . .0 0 .0 . 0 . 0 5 5 . 0. .
2.5000 1.9375 -0.55 0.25 5.51 5.98 0.13 8.54 8.23 0.25 0.15
26.31
5. 00 . . . .0 .0 . .0 .0 .00 .50 . 0. 5 5 .
1.0000 0.7200 0.36 0.13 5.24 5.43 0.13 6.61 6.34 0.12 0.06
3.72
. . 00 .5 .5 .0 5 .0 . .0 00.0 .00 . 0 5 0. .
1.9460 1.5000 0.53 0.14 5.63 6.06 0.13 8.63 7.87 0.36 0.25
19.27
. . 5 . .5 .0 5.0 .5 0.0 5 .0 . 0 . 0 0. 0.
0.6875 0.5313 0.24 0.06 5.24 5.31 0.06 6.30 6.22 0.05 0.08
2.02
. 5 0. .5 .5 .0 .0 .5 .0 0.0 0. 0 . 0 5 0 0. 5 .
1.0313 0.8125 0.10 0.06 5.28 5.35 0.06 6.46 6.30 0.03 0.06
3.55
5. 00 . . . .0 .0 . .0 0.0 .00 .50 . 0. 5 5 .50
1.0000 0.7200 0.36 0.13 5.28 5.47 0.13 6.57 6.30 0.12 0.06
3.30
.5 . 50 - . . 5.0 0.0 . .0 .0 . 0 0. 0 5 0. 5 .5
1.4375 1.2500 -0.17 0.13 5.31 5.51 0.13 6.61 6.34 0.09 0.02
5.60
. 5 0. .5 .5 .0 .0 .5 .0 .0 0. 0 . 0 5 0 0. 5 . 0
1.0313 0.8125 0.10 0.06 5.28 5.35 0.06 6.54 6.46 0.03 0.06
4.63
. 00 . -5. .5 5.0 .0 . .0 .0 . 0 . 0 5 . 0. .
1.5000 1.3125 -0.22 0.14 5.31 5.55 0.13 6.93 6.61 0.07 0.13
7.22
.0 . 00 - . .5 .0 .0 . .0 0.0 . 0 . 0 0. 0. 0 5.0
1.8125 1.5000 -0.25 0.14 5.43 5.67 0.13 7.44 7.09 0.17 0.05
11.05
.0 . 00 - . .5 .0 .0 . .0 .0 . 0 . 0 0. 0. 0 5.
1.8125 1.5000 -0.25 0.14 5.43 5.67 0.13 7.52 7.20 0.17 0.05
12.37
. 5 . 5 . .5 .0 .0 . 0 .0 .0 . 0 .00 .5 0. .0
1.8750 1.3750 0.09 0.14 5.55 5.83 0.13 8.19 7.72 0.19 0.08
15.45
. . 00 . .5 .5 5 .0 . .0 .0 . 0 . 0 . 0. .
1.9460 1.5000 0.52 0.14 5.65 5.94 0.13 8.38 7.76 0.32 0.19
18.17
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
.000 . 00 5 . 5 5 000 0. 0. 000 50000 0. 000 HM HM 0
5.0000 9.0000 2.1250 103000 26700 33700 151000
.000 . 50 .500 5 000 0. . 5 000 5500 .5 000 5500 5 5
5.0000 9.2500 2.5000 131000 33900 21500 209000
.000 . 5 .500 5 000 0. . 5 000 5500 .5 000 5500 5
5.0000 9.6250 2.5000 131000 33900 21500 209000
.000 50. 5 .500 5 0000 0. . 5 000 00 .5 000 EE 050 0
5.0000 9.8750 2.5000 133000 34400 21600 195000
.000 5 .000 . 5 000 0. . 5 000 0000 . 0 0000 500 00
5.0000 10.0000 2.6250 137000 35600 24800 231000
.000 5 .000 . 000 0. . 000 0000 . 0000 HH HH 0
5.0000 10.0000 3.0625 189000 49100 27000 279000
.000 . 5 .550 000 0. . 5 000 000 . 0000 HH HH 0
5.0000 11.3750 3.2500 220000 56900 31100 302000
.000 5. 5 .550 000 0. . 5 000 000 . 0000 HH HH 5
5.0000 11.6250 3.2500 220000 56900 31100 302000
.000 0 . 00 . 00 0 000 0. 0. 000 000 0. 0 50000 HH HH 0
5.0000 12.0000 3.5000 203000 52700 65700 282000
.000 . 50 . 00 0 000 0. 0. 000 000 0. 0 50000 HH HH 5
5.0000 12.2500 3.5000 203000 52700 65700 282000
. . 00 5 . 5 5 000 0. 0. 000 50000 0. 000 HM HM 0
5.0312 9.0000 2.1250 103000 26700 33700 151000
.5 0.500 . 5 000 0. 5 0. 500 500 0. 00000 50 50
5.0625 7.5000 1.3750 36900 9560 10700 67400
.5 0 . 5 . 5 50000 0. . 0 00 00 . 5 000
5.0625 8.1250 1.8750 78700 20400 16000 133000
. 5 . 5 . 5 000 0. . 5 000 5500 .5 000 55 5
5.1171 9.2510 2.5511 131000 33900 21500 209000
0.000 5.000 .000 000 0. . 000 00 . 000 JP 0 A JP 0 0
5.1181 7.2835 1.1417 40800 10600 8560 63600
0.000 5.000 .000 000 0. . 000 00 . 000 JP 0 JP 0 0
5.1181 7.2835 1.1417 40800 10600 8560 63600
0.000 0 . 5 . 5 50000 0. . 0 00 00 . 5 000
5.1181 8.1250 1.8750 78700 20400 16000 133000
0.000 0.000 .500 5 000 0. . 5 000 5500 .5 000 55 X 5 05
5.1181 9.0551 2.5000 131000 33900 21500 209000
0.000 . 50 .500 5 000 0. . 5 000 5500 .5 000 55 X 5 5
5.1181 9.2500 2.5000 131000 33900 21500 209000
0.000 . 5 .500 5 000 0. . 5 000 5500 .5 000 55 X 5
5.1181 9.2510 2.5000 131000 33900 21500 209000
0. 5 . 50 .0 0000 0. . 00 5 000 . 0 5000
5.1250 7.7500 1.8125 76500 19800 11700 141000
0. 5 0 . 00 .0 0000 0. . 00 5 000 . 0 5000 0
5.1250 8.0000 1.8125 76500 19800 11700 141000
0. 5 0 . 5 . 5 50000 0. . 0 00 00 . 5 000 A
5.1250 8.1250 1.8750 78700 20400 16000 133000
. 50 .0 .050 00 0. 5 . 00 00 . 0000 LL 0 LL 0 0
5.2500 6.8125 0.7500 20100 5200 3100 38300
. 50 .00 5. 00 000 0. 5 . 5 00 000 . 000 L L 0
5.2500 6.9688 1.0000 30600 7940 4730 65000
. 50 0.500 . 000 0. . 00 00 . 5 000 5 0
5.2500 7.5000 1.5625 58900 15300 8390 122000
. 50 . 50 .0 0000 0. . 00 5 000 . 0 5000 0
5.2500 7.7500 1.8125 76500 19800 11700 141000
. 50 . 50 .0 0000 0. . 00 5 000 . 0 5000
5.2500 7.7500 1.8125 76500 19800 11700 141000
B
Caption:
Caption:
C
D
B
d
a
B 0 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. . 00 .5 .5 .0 5 .0 . .0 00.0 .00 . 0 5 0. .
1.9460 1.5000 0.53 0.14 5.63 6.14 0.13 8.63 7.87 0.36 0.25
18.98
.500 . - .0 . .0 5 .0 . .0 0 .0 . 0 . 0 5 5 . 0. .
2.5000 1.9375 -0.55 0.25 5.59 6.06 0.13 8.54 8.23 0.25 0.15
25.86
.500 . - .0 . .0 5 .0 . .0 .0 . 0 . 0 5 5 . 0. .0
2.5000 1.9375 -0.55 0.25 5.59 6.06 0.13 8.54 8.39 0.25 0.15
28.83
.500 . 5 - .5 . .0 .0 . .0 0.0 .50 . 0 5 . 0. .
2.5000 1.8750 -0.53 0.13 5.67 5.83 0.19 8.82 8.66 0.34 0.06
30.00
. 5 . 5 - . . .0 5 .0 . .0 .0 . 0 .50 55 .5 0. 5 5.
2.6250 1.8750 -0.48 0.25 5.87 6.26 0.13 9.37 8.94 0.38 0.14
34.03
.550 . - . . .0 .0 . .5 .0 . 0 0.00 5 0 . 0. . 0
3.2500 2.4375 -0.92 0.38 5.83 6.46 0.25 9.20 8.78 0.28 0.00
39.02
. 5 . 50 - . .5 50.0 .0 . .5 55.0 . 0 . 0 0 5 . 0. 0 5.
3.4375 2.2500 -1.05 0.53 5.91 6.85 0.25 10.38 10.04 0.50 0.04
55.57
. 5 . 50 - . .5 50.0 .0 . .5 5 .0 . 0 . 0 0 5 . 0. 0 .0
3.4375 2.2500 -1.05 0.53 5.91 6.85 0.25 10.38 10.16 0.50 0.04
59.58
.550 5 . 50 . . .0 .0 . .0 0.0 .50 . 0 5 55. 0. .
3.2500 2.2500 0.07 0.25 6.77 7.17 0.25 11.34 10.24 0.85 0.35
65.00
.550 5 . 50 . . .0 .0 . .0 .0 .50 . 0 5 55. 0. 0.
3.2500 2.2500 0.07 0.25 6.77 7.17 0.25 11.34 10.31 0.85 0.35
67.75
. . 00 .5 .5 .0 5 .0 . .0 00.0 .00 . 0 5 0. .55
1.9460 1.5000 0.53 0.14 5.63 6.14 0.13 8.63 7.87 0.36 0.25
18.84
. 50 5. 00 .5 .5 .0 .0 . .0 0.0 . 0 0. 0 . 0. .0
1.2500 1.0000 0.65 0.14 5.43 5.67 0.13 7.20 6.69 0.18 0.03
6.76
. 5 . 5 - . . 0.0 .0 . .0 .0 5. 0 . 0 . 0. 5.
1.8750 1.3750 -0.07 0.13 5.51 5.75 0.13 7.80 7.32 0.21 0.11
12.66
.500 . 50 - .0 . 5.0 5 .0 . .0 0 .0 . 0 . 0 5 5 . 0. .5
2.5000 1.9665 -0.55 0.25 5.71 6.18 0.13 8.54 8.19 0.25 0.15
25.41
.000 .000 . .0 .0 .0 .0 .0 .0 . 0 . 0 0. 0. 0 . 5
1.0630 0.8268 0.35 0.24 5.39 5.87 0.12 7.05 6.77 0.09 0.16
4.73
.000 .000 . .0 .0 .0 .0 .0 .0 . 0 . 0 0. 0. 0 .
1.0630 0.8268 0.35 0.12 5.39 5.63 0.12 7.05 6.77 0.09 0.16
4.76
. 5 . 5 - . .5 .0 .0 . .0 .0 5. 0 . 0 . 0. 5.
1.8750 1.3750 -0.07 0.14 5.55 5.83 0.13 7.80 7.32 0.21 0.11
12.42
.500 . - .0 .0 5.0 5 .0 . .0 0 .0 . 0 . 0 5 5 . 0. 0.
2.5000 1.9375 -0.55 0.24 5.71 6.14 0.13 8.54 8.15 0.25 0.15
23.60
.500 . - .0 .0 5.0 5 .0 . .0 0 .0 . 0 . 0 5 5 . 0. .
2.5000 1.9375 -0.55 0.24 5.71 6.14 0.13 8.54 8.23 0.25 0.15
25.21
.500 . - .0 .0 5.0 5 .0 . .0 0 .0 . 0 . 0 5 5 . 0. .
2.5000 1.9375 -0.55 0.24 5.71 6.14 0.13 8.54 8.23 0.25 0.15
25.14
.0 . 00 - . .5 .0 .0 . .0 0.0 . 0 . 0 0. 0. 0 .
1.8125 1.5000 -0.25 0.14 5.55 5.75 0.13 7.44 7.09 0.17 0.05
10.54
.0 . 00 - . .5 .0 .0 . .0 .0 . 0 . 0 0. 0. 0 5.
1.8125 1.5000 -0.25 0.14 5.55 5.75 0.13 7.52 7.20 0.17 0.05
11.86
. 5 . 5 - . .5 .0 .0 . .0 .0 5. 0 . 0 . 0. 5.
1.8750 1.3750 -0.07 0.14 5.59 5.83 0.13 7.80 7.32 0.21 0.11
12.39
. . . .5 .0 .0 .5 .0 .0 . 0 . 0 0. .00
0.6875 0.5625 0.30 0.06 5.47 5.55 0.06 6.57 6.46 0.06 0.08
2.21
. 5 0. . .5 0.0 .0 .5 .0 .0 0. 0 . 0 0 5 0. 5 5 .
1.0313 0.8125 0.16 0.06 5.51 5.59 0.06 6.73 6.57 0.03 0.07
3.78
. . - . .5 .0 .0 . .0 .0 . 0 . 0 0 5. 0. 0 .5
1.5625 1.3125 -0.16 0.14 5.59 5.83 0.13 7.24 6.97 0.11 0.05
7.85
.0 . 00 - . .5 .0 .0 . .0 0.0 . 0 . 0 0. 0. 0 .55
1.8125 1.5000 -0.25 0.14 5.63 5.87 0.13 7.44 7.09 0.17 0.05
10.02
.0 . 00 - . .0 .0 5 .0 . .0 0.0 . 0 . 0 0. 0. 0 .5
1.8125 1.5000 -0.25 0.31 5.63 6.18 0.13 7.44 7.09 0.17 0.05
10.00
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 50 0 . 00 .0 0000 0. . 00 5 000 . 0 5000 0 0
5.2500 8.0000 1.8125 76500 19800 11700 141000
. 50 0 . 00 .0 0000 0. . 00 5 000 . 0 5000 0
5.2500 8.0000 1.8125 76500 19800 11700 141000
. 50 . 5 . 5 5 000 0. . 00 500 . 0 000 5 5 5
5.2500 8.4636 1.8750 79500 20600 17200 138000
. 50 5. 00 . 5 5 000 0. . 00 500 . 0 000 5 5 50
5.2500 8.5000 1.8750 79500 20600 17200 138000
. 50 5. 00 5 . 5 5 000 0. . 00 500 . 0 000 5 5 5
5.2500 8.5000 2.1250 79500 20600 17200 138000
. 50 . 50 .500 5 000 0. . 5 000 5500 .5 000 55 5 5 5
5.2500 9.2500 2.5000 131000 33900 21500 209000
. 50 . 50 .500 5 000 0. . 5 000 5500 .5 000 55 5 5
5.2500 9.2500 2.5000 131000 33900 21500 209000
.5 5 0.500 . 000 0. . 00 00 . 5 000 0
5.3750 7.5000 1.5625 58900 15300 8390 122000
.5 5 0 . 00 . 000 0. . 00 00 . 5 000
5.3750 8.0000 1.5625 58900 15300 8390 122000
.5 5 5. 00 . 5 5 000 0. . 00 500 . 0 000 5 50
5.3750 8.5000 1.8750 79500 20600 17200 138000
.5 5 . . 5 5 000 0. . 00 500 . 0 000 5 5
5.3750 8.5625 1.8750 79500 20600 17200 138000
.5 5 . 00 5 . 50 000 0. . 5000 0000 . 0 000
5.3750 9.0000 2.2500 108000 28100 20200 182000
. 00 . 5 .5 5 000 0. . 5 00 00 . 5 5000 LM LM 0
5.5000 7.3750 1.1250 39800 10300 6270 84300
. 00 . 5 . 5 5 000 0. . 00 500 . 0 000 550 5
5.5000 8.4636 1.8750 79500 20600 17200 138000
. 00 5. 00 . 5 5 000 0. . 00 500 . 0 000 550 50
5.5000 8.5000 1.8750 79500 20600 17200 138000
. 00 5. 00 . 5 5 000 0. . 00 500 . 0 000 550A 50
5.5000 8.5000 1.8750 79500 20600 17200 138000
. 00 . 50 . 5 000 0. . 5 00 00 . 000 55 5
5.5000 8.7500 1.3750 51400 13300 9970 77000
. 00 . 00 5 . 50 000 0. . 5000 0000 . 0 000
5.5000 9.0000 2.2500 108000 28100 20200 182000
. 00 . 00 5 . 50 000 0. . 5000 0000 . 0 000 A
5.5000 9.0000 2.2500 108000 28100 20200 182000
. 00 .5 5 . 50 55 000 0. . 000 00 . 000 HM HM 0
5.5000 9.3125 2.2500 124000 32200 17600 210000
. 00 . 00 5 . 50 55 000 0. . 000 00 . 000 HM HM 5
5.5000 9.5000 2.2500 124000 32200 17600 210000
. 00 5 .000 . 5 000 0. . 5 000 0000 . 0 0000 550 00
5.5000 10.0000 2.6250 137000 35600 24800 231000
. 00 . 5 .550 000 0. . 5 000 000 . 0000 HH HH 0
5.5000 11.3750 3.2500 220000 56900 31100 302000
. 00 5. 5 .550 000 0. . 5 000 000 . 0000 HH HH 5
5.5000 11.6250 3.2500 220000 56900 31100 302000
. 00 0 . 5 . 00 0000 0. . 000 000 . 5 0000 HH 0 HH 0 0
5.5000 12.1250 3.5000 254000 65900 36800 354000
. 00 0 . 5 . 00 0000 0. . 000 000 . 5 0000 HH 0 HH 0 0
5.5000 12.1250 3.5000 254000 65900 36800 354000
0.000 5.000 .000 000 0.50 . 00 000 . 0 000 JP 0 JP 0 0
5.5118 7.6772 1.1417 42300 11000 9440 68400
. 5 . 5 .5 5 000 0. . 00 00 .5 000 0
5.6250 7.6250 1.1250 40900 10600 6690 88600
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.0 . 00 - . .5 .0 .0 . .0 .0 . 0 . 0 0. 0. 0 5.
1.8125 1.5000 -0.25 0.14 5.63 5.87 0.13 7.52 7.20 0.17 0.05
11.34
.0 . 00 - . .0 .0 5 .0 . .0 .0 . 0 . 0 0. 0. 0 5.
1.8125 1.5000 -0.25 0.31 5.63 6.18 0.13 7.52 7.20 0.17 0.05
11.31
. 5 . 5 . .5 .0 5 .0 . 0 .0 .0 . 0 .00 . 0. .
1.8750 1.3750 0.09 0.14 5.75 5.98 0.13 8.19 7.72 0.19 0.08
14.14
. 5 . 5 . .5 .0 5 .0 . 0 .0 .0 . 0 .00 . 0. .5
1.8750 1.3750 0.09 0.14 5.75 5.98 0.13 8.19 7.72 0.19 0.08
14.38
. 5 . 5 . .5 .0 5 .0 . 0 .0 .0 . 0 .00 . 0. . 0
1.8750 1.8750 0.09 0.14 5.75 5.98 0.13 8.23 7.72 0.19 0.08
15.86
.500 . - .0 . .0 .0 . .0 0 .0 . 0 . 0 5 5 . 0. 0.
2.5000 1.9375 -0.55 0.38 5.83 6.54 0.13 8.54 8.23 0.25 0.15
24.23
.500 . - .0 . .0 5 .0 . .0 0 .0 . 0 . 0 5 5 . 0. .
2.5000 1.9375 -0.55 0.19 5.83 6.18 0.13 8.54 8.23 0.25 0.15
24.50
. . - . .5 .0 5 .0 . .0 .0 . 0 . 0 0 5. 0. 0 . 5
1.5625 1.3125 -0.16 0.14 5.67 5.94 0.13 7.24 6.97 0.11 0.05
7.38
. . - . .5 .0 5 .0 . .0 .0 . 0 . 0 0 5. 0. 0 .
1.5625 1.3125 -0.16 0.14 5.67 5.94 0.13 7.32 7.17 0.11 0.05
9.64
. 5 . 5 . .5 .0 55.0 . 0 .0 .0 . 0 .00 .5 0. .
1.8750 1.3750 0.09 0.14 5.83 6.10 0.13 8.19 7.72 0.19 0.08
13.82
. 5 . 5 . .5 .0 55.0 . 0 .0 .0 . 0 .00 .5 0. . 0
1.8750 1.3750 0.09 0.14 5.83 6.10 0.13 8.23 7.76 0.19 0.08
14.10
5 . 50 . 50 - . .5 50.0 5 .0 . .0 05.0 . 0 . 0 0 . 0. 55 . 5
2.2500 1.7500 -0.24 0.14 5.91 6.14 0.13 8.50 8.07 0.25 0.05
19.72
. 0 .0 0 . .5 .0 .0 .5 .0 .0 . 0 . 0 0. 00 . 0
1.1563 0.9063 0.14 0.06 5.79 5.87 0.06 7.17 6.93 0.05 0.08
4.85
. 5 . 5 . .5 5 .0 5 .0 . 0 .0 .0 . 0 .00 . 0. 5.
1.8750 1.3750 0.09 0.14 5.94 6.22 0.13 8.19 7.72 0.19 0.08
13.02
. 5 . 5 . .5 5 .0 5 .0 . 0 .0 .0 . 0 .00 . 0. .0
1.8750 1.3750 0.09 0.14 5.94 6.22 0.13 8.19 7.72 0.19 0.08
13.26
. 5 . 5 . . 5 .0 .0 . 0 .0 .0 . 0 .00 . 0. .00
1.8750 1.3750 0.09 0.25 6.06 6.54 0.13 8.19 7.72 0.19 0.08
13.23
. . . .5 50.0 5 .0 . 0 .0 0 .0 5. 0 . 0 0. .
1.2450 0.9375 0.25 0.14 5.91 6.14 0.13 8.15 8.03 0.23 0.15
9.40
5 . 50 . 50 - . .5 5 .0 0.0 . .0 05.0 . 0 . 0 0 . 0. 55 .
2.2500 1.7500 -0.24 0.14 6.02 6.30 0.13 8.50 8.07 0.25 0.05
19.04
5 . 50 . 50 - . . 5 .0 5.0 . .0 05.0 . 0 . 0 0 . 0. 55 .5
2.2500 1.7500 -0.24 0.25 6.02 6.50 0.13 8.50 8.07 0.25 0.05
18.93
5 . . 50 - . .5 5 .0 0.0 . .0 .0 . 0 . 0 5 5. 0. . 0
2.2300 1.7500 -0.45 0.14 6.14 6.30 0.13 8.82 8.54 0.17 0.14
21.82
5 . . 50 - . .5 5 .0 0.0 . .0 .0 . 0 . 0 5 5. 0. 0.5
2.2300 1.7500 -0.45 0.14 6.14 6.30 0.13 8.82 8.62 0.17 0.14
23.19
. 5 . 5 - . .0 5 .0 0.0 . .0 .0 . 0 .50 55 .5 0. 5 .00
2.6250 1.8750 -0.48 0.28 6.14 6.69 0.13 9.37 8.94 0.38 0.14
30.87
. 5 . 50 - . . .0 .0 . .5 55.0 . 0 . 0 0 5 . 0. 0 .5
3.4375 2.2500 -1.05 0.38 6.34 6.97 0.25 10.38 10.04 0.50 0.04
51.87
. 5 . 50 - . . .0 .0 . .5 5 .0 . 0 . 0 0 5 . 0. 0 5.
3.4375 2.2500 -1.05 0.38 6.34 6.97 0.25 10.38 10.16 0.50 0.04
55.87
. . 5 - . . .0 0.0 . 5.5 .0 .50 -0. 0 . 0. 5 0.
3.6875 2.6250 -1.04 0.38 6.61 7.09 0.27 11.24 10.87 0.49 -0.04
67.85
. . 5 - . . .0 0.0 . 5.5 .0 0.50 . 0 . 0. 5 .
3.6875 2.6250 -1.04 0.38 6.61 7.09 0.27 11.24 10.87 0.42 0.04
64.99
.000 .000 . .0 .0 5 .0 .0 .0 .0 . 0 . 0 0 . 0. .
1.0630 0.8268 0.47 0.12 5.83 6.02 0.12 7.44 7.17 0.10 0.16
5.06
.5 5 .0 0 . .5 5 .0 5 .0 .5 .0 .0 . 0 . 0 5 0. .
1.1250 0.9063 0.19 0.06 5.94 6.02 0.06 7.40 7.17 0.05 0.11
5.35
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 5 00.0 5 . 5 5000 0. . 00 00 . 5 0000 0
5.6250 7.8750 1.6250 59600 15500 8900 126000
. 5 00.0 5 . 5 5000 0. . 00 00 . 5 0000 5 0
5.6250 7.8750 1.6250 59600 15500 8900 126000
. 5 . 50 . 5 000 0. . 5 00 00 . 000 5 5
5.6250 8.7500 1.3750 51400 13300 9970 77000
. 5 .5 5 . 50 000 0. . 000 00 . 0000 5 A
5.6250 9.3125 2.2500 107000 27800 21000 182000
. 5 . 00 5 . 50 000 0. . 000 00 . 0000 5 A 50
5.6250 9.5000 2.2500 107000 27800 21000 182000
. 5 . 00 5 . 50 55 000 0. . 000 00 . 000 HM HM 5
5.6250 9.5000 2.2500 124000 32200 17600 210000
.050 . 0 . 5 05000 0. .5 00 00 .5 000 LL5 LL5 0
5.7500 7.4063 0.8750 23500 6100 3990 48200
.050 . 5 .5 5 000 0. . 00 00 .5 000 0 0
5.7500 7.6250 1.1250 40900 10600 6690 88600
.050 . 5 .5 5 000 0. . 00 00 .5 000 0
5.7500 7.6250 1.1250 40900 10600 6690 88600
.050 0 . 00 .5 5 000 0. . 00 00 .5 000 0
5.7500 8.0000 1.1250 40900 10600 6690 88600
.050 0 . 00 5. 00 0 000 0. . 0 0 00 5 00 . 5 000 M A M 0
5.7500 8.0000 1.7756 69500 18000 10300 129000
.050 0 . 00 5. 00 0 000 0. . 0 0 00 5 00 . 5 000 M M 0
5.7500 8.0000 1.7756 69500 18000 10300 129000
.050 .5 5 . 50 000 0. . 000 00 . 0000 5
5.7500 9.3125 2.2500 107000 27800 21000 182000
.050 . 00 5 . 50 000 0. . 000 00 . 0000 5 50
5.7500 9.5000 2.2500 107000 27800 21000 182000
.050 . 00 5 . 50 55 000 0. . 000 00 . 000 HM 0 HM 5
5.7500 9.5000 2.2500 124000 32200 17600 210000
.050 . 5 . 5 000 0. 5 . 00 5 00 . 5 5000 5 5
5.7500 9.6250 1.8750 83600 21700 13100 134000
.050 5 .000 . 5 000 0. . 5 000 0000 . 0 0000 5 5 00
5.7500 10.0000 2.6250 137000 35600 24800 231000
.050 . . 000 0. .55 000 5000 .5 0000 EE 0 05 0 05
5.7500 10.5625 2.9375 163000 42300 28100 263000
.050 0 . 00 0. 5 000 0. . 0 000 0 000 . 000 EE 505 5 00
5.7500 12.0000 2.3750 161000 41800 23800 196000
.050 0 . 00 . 00 0 000 0. 0. 000 000 0. 0 50000 HH 5 HH 0
5.7500 12.0000 3.5000 203000 52700 65700 282000
.050 0 . 5 . 00 5000 0. . 5 000 000 . 0000 EE 505 5
5.7500 12.1250 3.5000 219000 56800 31700 333000
.050 0 . 5 . 00 0000 0. . 000 000 . 5 0000 HH 0 0 HH 0 0
5.7500 12.1250 3.5000 254000 65900 36800 354000
.050 . 50 . 00 0 000 0. 0. 000 000 0. 0 50000 HH 5 HH 5
5.7500 12.2500 3.5000 203000 52700 65700 282000
. 5 .5 5 . 50 55 000 0. . 000 00 . 000 HM HM 0
5.8750 9.3125 2.2500 124000 32200 17600 210000
. 5 .5 5 . 50 55 000 0. . 000 00 . 000 HM HM 0
5.8750 9.3125 2.2500 124000 32200 17600 210000
. 5 . 00 5 . 50 55 000 0. . 000 00 . 000 HM HM 5
5.8750 9.5000 2.2500 124000 32200 17600 210000
. 5 5 .000 . 5 000 0. . 5 000 0000 . 0 0000 5 00
5.8750 10.0000 2.6750 137000 35600 24800 231000
50.000 0 . 00 .5 0 000 0. . 500 500 . 000 JL 0 L 0 0
5.9055 8.0000 1.1250 40300 10500 8210 76100
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. . 0 - .0 .0 5 .0 .0 . .0 5.0 . 0 .50 0 5 0. .
1.5625 1.3437 -0.12 0.31 5.94 6.54 0.13 7.60 7.28 0.11 0.10
8.25
. . 0 - .0 .5 5 .0 5 .0 . .0 5.0 . 0 .50 0 5 0. .
1.5625 1.3437 -0.12 0.14 5.94 6.22 0.13 7.60 7.28 0.11 0.10
8.46
. . . .5 5 .0 5 .0 . 0 .0 0 .0 5. 0 . 0 0. .0
1.2450 0.9375 0.25 0.14 5.98 6.26 0.13 8.15 8.03 0.23 0.15
9.01
5 . . 50 - . .0 5 .0 .0 . .0 .0 5. 0 . 0 0 . 0. 05 .
2.2300 1.7500 -0.14 0.31 6.18 6.77 0.13 8.90 8.39 0.23 0.08
20.78
5 . . 50 - . .0 5 .0 .0 . .0 5.0 5. 0 . 0 0 . 0. 05 0.05
2.2300 1.7500 -0.14 0.31 6.18 6.77 0.13 8.90 8.46 0.23 0.08
22.15
5 . . 50 - . .5 5 .0 .0 . .0 .0 . 0 . 0 5 5. 0. 0. 0
2.2300 1.7500 -0.45 0.14 6.22 6.38 0.13 8.82 8.62 0.17 0.14
22.50
0. . 0 . .5 5 .0 55.0 .5 .0 .0 0.50 . 0 0. 55 .
0.8125 0.6563 0.37 0.06 5.98 6.10 0.06 7.17 7.05 0.02 0.07
3.12
.5 5 .0 0 . .5 5 .0 55.0 .5 .0 .0 . 0 . 0 0. .
1.1250 0.9063 0.19 0.06 6.02 6.10 0.06 7.40 7.17 0.05 0.11
5.00
.5 5 .0 0 . . 5 .0 .0 .5 .0 .0 . 0 . 0 5 0. .
1.1250 0.9063 0.19 0.19 6.02 6.38 0.06 7.40 7.17 0.05 0.11
4.91
.5 5 .0 0 . .5 5 .0 55.0 .5 0.0 .0 . 0 . 0 0. . 0
1.1250 0.9063 0.19 0.06 6.02 6.10 0.06 7.48 7.32 0.05 0.11
6.17
0.000 . 00 - .5 5.0 5 .0 .0 .5 .0 .0 .50 . 0 0 0. 0 .
1.5748 1.5000 -0.10 0.20 6.06 6.46 0.14 7.76 7.36 0.06 0.11
8.79
0.000 . 00 - .5 .5 5 .0 0.0 .5 .0 .0 .50 . 0 0 0. 0 .00
1.5748 1.5000 -0.10 0.14 6.06 6.30 0.14 7.76 7.36 0.06 0.11
8.81
5 . . 50 - . .5 0.0 .0 . .0 .0 5. 0 . 0 0 . 0. 05 . 0
2.2300 1.7500 -0.14 0.14 6.30 6.54 0.13 8.90 8.39 0.23 0.08
20.28
5 . . 50 - . .5 0.0 .0 . .0 5.0 5. 0 . 0 0 . 0. 05 .
2.2300 1.7500 -0.14 0.14 6.30 6.54 0.13 8.90 8.46 0.23 0.08
21.65
5 . . 50 - . .5 0.0 .0 . .0 .0 . 0 . 0 5 5. 0. .
2.2300 1.7500 -0.45 0.14 6.30 6.46 0.13 8.82 8.62 0.17 0.14
21.79
50.005 . -5. .5 .0 .0 . .0 5.0 . 0 -0. 0 . 0. 50 .
1.9687 1.3125 -0.21 0.14 6.34 6.54 0.13 9.02 8.86 0.33 0.00
18.06
. 5 . 5 - . .0 .0 5.0 . .0 .0 . 0 .50 55 .5 0. 5 . 5
2.6250 1.8750 -0.48 0.28 6.38 6.89 0.13 9.37 8.94 0.38 0.14
29.22
. 5 . 50 - 5.0 . .0 .0 . .5 .0 . 0 .00 0 . 0. .
2.9375 2.2500 -0.59 0.25 6.54 6.93 0.25 9.82 9.33 0.30 0.12
38.30
. . 5 - 0. . .0 .0 . .0 0.0 . 0 .50 5 . 0.0 .
2.4375 1.6250 -0.42 0.13 6.77 6.57 0.25 10.71 10.63 0.26 0.14
38.90
.550 5 . 50 . . .5 5.0 . .0 0.0 .50 . 0 5 55. 0. .
3.2500 2.2500 0.07 0.25 6.87 7.68 0.25 11.34 10.24 0.85 0.35
59.16
. . - . . .0 5.0 . 5.0 .0 . 0 - . 0 . 0. .5
3.6875 2.4375 -1.11 0.38 6.77 7.28 0.27 10.82 10.59 0.70 -0.11
65.24
. . 5 - . . .0 .0 . 5.5 .0 0.50 0. 0 . 0. 5 .
3.6875 2.6250 -1.04 0.38 6.81 7.32 0.27 11.24 10.87 0.42 0.03
62.67
.550 5 . 50 . . .5 5.0 . .0 .0 .50 . 0 5 55. 0. .0
3.2500 2.2500 0.07 0.25 6.87 7.68 0.25 11.34 10.31 0.85 0.35
61.91
5 . . 50 - . . .0 .0 . .0 .0 . 0 . 0 5 5. 0. .
2.2300 1.7500 -0.45 0.25 6.42 6.77 0.13 8.82 8.54 0.17 0.14
19.59
5 . . 50 - . .5 .0 .0 . .0 .0 . 0 . 0 5 5. 0. .
2.2300 1.7500 -0.45 0.14 6.42 6.57 0.13 8.82 8.54 0.17 0.14
19.70
5 . . 50 - . .5 .0 .0 . .0 .0 . 0 . 0 5 5. 0. .5
2.2300 1.7500 -0.45 0.14 6.42 6.57 0.13 8.82 8.62 0.17 0.14
21.07
. 5 . 5 - . .0 5.0 .0 . .0 .0 . 0 .50 55 .5 0. 5 .
2.6250 1.8750 -0.48 0.28 6.50 7.01 0.13 9.37 8.94 0.38 0.14
28.37
.5 5 . . . 5 .0 .0 . .0 0.0 . 0 . 0 5 0 0. .
1.1250 0.8440 0.45 0.13 6.22 6.46 0.13 7.80 7.48 0.10 0.06
5.48
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
50.000 05.000 .5 0 000 0. . 500 500 . 000 JL 0 JL 0
5.9055 8.0709 1.1250 40300 10500 8210 76100
50.000 . 5 . 5 000 0. 5 . 00 5 00 . 5 5000 5 0
5.9055 9.6250 1.8750 83600 21700 13100 134000
50.000 5.000 . 5 000 0. 5 . 00 5 00 . 5 5000 5 0
5.9055 9.6457 1.8750 83600 21700 13100 134000
50. . 5 . 5 000 0. 5 . 00 5 00 . 5 5000 5
5.9375 9.6250 1.8750 83600 21700 13100 134000
5 . 00 .0 5.000 000 0. . 00 00 . 0 000 L 0 L 0 0
6.0000 7.5625 0.9843 29700 7690 5480 62200
5 . 00 0 . 00 .5 5 000 0. . 500 500 . 000 L 0 L 0 0
6.0000 8.0000 1.1250 40300 10500 8210 76100
5 . 00 0 . 00 . 5 000 0. 5 . 000 0 00 . 55 000 LM 0 LM 0 0
6.0000 8.0000 1.6250 59000 15300 9090 125000
5 . 00 . 5 . 5 000 0. 5 . 00 5 00 . 5 5000 00
6.0000 9.6250 1.8750 83600 21700 13100 134000
5 . 00 . . 5 000 0. . 5 000 0000 . 0 0000 00 0
6.0000 9.8415 2.6250 137000 35600 24800 231000
5 . 00 50.000 . 5 000 0. . 5 000 0000 . 0 0000 00 0 X
6.0000 9.8425 2.6250 137000 35600 24800 231000
5 . 00 5 .000 . 5 000 0. . 5 000 0000 . 0 0000 00 00
6.0000 10.0000 2.6250 137000 35600 24800 231000
5 . 00 . . 000 0. .55 000 5000 .5 0000 EE 0 0 0 0 05
6.0000 10.5625 2.9375 163000 42300 28100 263000
5 . 00 5. 50 . 00 0 000 0. 0 . 000 5000 . 5 0 0000 EE 0 0
6.0000 11.2500 3.0000 158000 40800 28100 237000
5 . 00 0 . 5 . 00 5000 0. . 5 000 000 . 0000 EE 50 0 5
6.0000 12.1250 3.5000 219000 56800 31700 333000
5 . 00 0 . 5 . 00 0000 0. . 000 000 . 5 0000 HH 0 HH 0 0
6.0000 12.1250 3.5000 254000 65900 36800 354000
5 . 00 0 . 5 . 00 0000 0. . 000 000 . 5 0000 HH 0 HH 0 0
6.0000 12.1250 3.5000 254000 65900 36800 354000
5 . 00 .500 . 00 0000 0. . 000 000 . 5 0000 HH 0 HH 0
6.0000 12.5000 3.5000 254000 65900 36800 354000
55.5 5 0. 00 5. 5 0000 0. 0. 000 5000 0. 00000 H 0 H 0
6.1250 13.0000 3.3750 216000 56000 77500 316000
55.5 5 .550 5. 5 0000 0. 0. 000 5000 0. 00000 H 0 H
6.1250 13.2500 3.3750 216000 56000 77500 316000
55.5 5 . 00 5. 5 0000 0. 0. 000 5000 0. 00000 H 0 H
6.1250 13.5000 3.3750 216000 56000 77500 316000
5 . 50 05.5 . 000 0. . 5 00 500 .5 0000 L L 0
6.2500 8.0938 0.9375 30600 7930 5060 63000
5 . 50 5. 5 . 5 000 0. .5 00 00 .5 5000 0 0
6.2500 8.8750 1.6250 63100 16400 10700 143000
5 . 50 5. 50 . 00 0 000 0. 0 . 000 5000 . 5 0 0000 EE 0 X
6.2500 11.2500 3.0000 158000 40800 28100 237000
5 . 50 0 . 00 . 5 5 000 0. . 5 000 500 . 000 EE 0 00
6.2500 12.0000 2.6250 133000 34500 21200 195000
5 . 5 . 5 . 5 000 0. 5 . 00 5 00 . 5 5000
6.2973 9.6250 1.8750 83600 21700 13100 134000
5 . 5 . 5 . 5 000 0. 5 . 00 5 00 . 5 5000 0
6.2973 9.6250 1.8750 83600 21700 13100 134000
0.000 0.000 .000 000 0. . 0 000 00 . 5 000 JM 5 JM 0
6.2992 9.4488 1.8110 88400 22900 17200 171000
0. 5 . 5 .500 000 0. . 000 0 000 . 0000 HM 5 HM 5 0
6.3120 11.3750 2.5000 171000 44500 24300 278000
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.5 5 . . . 5 .0 .0 . .0 0.0 . 0 . 0 5 0 0. .
1.1250 0.8440 0.45 0.13 6.22 6.46 0.13 7.80 7.48 0.10 0.06
5.76
50.005 . -5. .5 .0 .0 . .0 5.0 . 0 -0. 0 . 0. 50 .
1.9687 1.3125 -0.21 0.14 6.42 6.65 0.13 9.02 8.86 0.33 0.00
17.36
50.005 . -5. .5 .0 .0 . .0 5.0 . 0 -0. 0 . 0. 50 .
1.9687 1.3125 -0.21 0.14 6.42 6.65 0.13 9.02 8.86 0.33 0.00
17.46
50.005 . -5. .5 .0 .0 . .0 5.0 . 0 -0. 0 . 0. 50 . 0
1.9687 1.3125 -0.21 0.14 6.46 6.65 0.13 9.02 8.86 0.33 0.00
17.21
.000 .000 0. .0 5 .0 .0 .0 .0 .0 . 0 .50 0. .5
0.9449 0.7480 0.40 0.08 6.22 6.38 0.08 7.36 7.20 0.08 0.10
3.44
.5 5 . . . 0.0 5.0 . .0 0.0 . 0 . 0 5 0 0. . 5
1.1250 0.8440 0.45 0.13 6.30 6.50 0.13 7.80 7.48 0.10 0.06
5.18
. 5 . 5 - . . .0 .0 . .0 .0 . 0 0. 0 5 5 0. .5
1.6250 1.3750 -0.07 0.13 6.37 6.54 0.13 7.76 7.44 0.11 0.04
7.74
50.005 . -5. .5 5.0 .0 . .0 5.0 . 0 -0. 0 . 0. 50 .
1.9687 1.3125 -0.21 0.14 6.50 6.73 0.13 9.02 8.86 0.33 0.00
16.84
. 5 5 . 00 - . .0 .5 .0 .0 0.0 .0 . 0 .50 55 . 0. 5 .05
2.6250 2.1024 -0.48 0.28 6.68 7.13 0.12 9.44 8.90 0.38 0.14
26.56
. 5 . 5 - . .0 .5 .0 . .0 .0 . 0 .50 55 . 0. 5 . 5
2.6250 1.8750 -0.48 0.28 6.68 7.13 0.13 9.37 8.90 0.38 0.14
26.13
. 5 . 5 - . .0 .5 .0 . .0 .0 . 0 .50 55 . 0. 5 .
2.6250 1.8750 -0.48 0.28 6.68 7.13 0.13 9.37 8.94 0.38 0.14
27.50
. 5 . 50 - 5.0 . .0 .0 . .5 .0 . 0 .00 0 . 0. .50
2.9375 2.2500 -0.59 0.25 6.73 7.13 0.25 9.82 9.33 0.30 0.12
36.38
.0 5 55.5 - 5.0 .5 .0 .0 . 0.5 5 .0 5.00 . 0 55 . 0. 0 .
2.8750 2.1875 -0.59 0.06 6.73 6.73 0.25 10.25 9.88 0.59 0.07
42.80
. . - . . .0 .0 . 5.0 .0 . 0 - . 0 . 0. .50
3.6875 2.4375 -1.11 0.38 6.97 7.44 0.27 10.82 10.59 0.70 -0.11
62.82
. . 5 - . . .0 .0 . 5.5 .0 .50 -0. 0 . 0. 5 .
3.6875 2.6250 -1.04 0.38 7.05 7.52 0.27 11.24 10.87 0.49 -0.04
63.11
. . 5 - . . .0 .0 . 5.5 .0 0.50 0. 0 . 0. 5 .
3.6875 2.6250 -1.04 0.38 7.05 7.52 0.27 11.24 10.87 0.42 0.03
60.25
. . 5 - . . .0 .0 . 5.5 0.0 0.50 0. 0 . 0. 5 . 5
3.6875 2.6250 -1.04 0.38 7.05 7.52 0.27 11.24 11.02 0.42 0.03
65.59
. 5 5 . 5 . . .5 0 .0 . .5 .0 . 0 . 0 . 0. 5 .
3.1250 2.1250 0.66 0.25 7.58 8.23 0.25 12.26 11.10 0.72 0.36
69.42
. 5 5 . 5 . . .5 0 .0 . .0 5.0 . 0 . 0 . 0. 5 .
3.1250 2.1250 0.66 0.25 7.58 8.23 0.25 12.24 11.22 0.72 0.36
72.51
. 5 5 . 5 . . .5 0 .0 . .5 .0 . 0 . 0 . 0. 5 .
3.1250 2.1250 0.66 0.25 7.58 8.23 0.25 12.26 11.30 0.72 0.36
75.66
. . 5 . . .0 .0 .5 .0 5.0 .00 . 0 0 0. . 5
0.9375 0.7188 0.37 0.19 6.54 6.85 0.06 7.83 7.68 0.08 0.05
4.09
. . .5 .5 .0 .0 . .0 0 .0 .00 .00 5 0. 5. 5
1.5625 1.3125 0.10 0.14 6.65 6.93 0.13 8.58 8.23 0.16 0.08
11.34
.0 5 55.5 - 5.0 .5 .0 00.0 . 0.5 5 .0 5.00 . 0 55 . 0. 0 .
2.8750 2.1875 -0.59 0.53 6.93 7.87 0.25 10.25 9.88 0.59 0.07
41.54
. 0 . - . . 0.0 .0 . .5 .0 5. 0 0. 0 5 0. 5 .
2.7207 1.6875 -0.48 0.25 7.09 7.56 0.13 11.12 10.98 0.60 0.04
43.62
50.005 . -5. .5 5.0 .0 . .0 5.0 . 0 -0. 0 . 0. 50 .0
1.9687 1.3125 -0.21 0.14 6.50 6.93 0.13 9.02 8.86 0.33 0.00
15.49
. 0 . -5. .5 .0 .0 . .0 5.0 . 0 . 0 . 0. 50 .
1.8437 1.3125 -0.21 0.14 6.73 6.93 0.13 9.02 8.86 0.33 0.12
15.18
.500 .000 5. .0 .0 .0 .5 .0 .0 . 0 .00 5 0. .
1.7520 1.4567 0.20 0.12 6.81 7.01 0.10 9.13 8.74 0.11 0.16
15.78
.500 . 5 - . .0 .0 .0 . .5 .0 5. 0 . 0 5 0 0. .
2.5000 1.8750 -0.46 0.28 7.13 7.56 0.13 10.68 10.47 0.23 0.16
38.23
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
5. 00 5. 00 . 5 5000 0. . 5 00 00 . 0 5000 L L 0
6.5000 8.5000 1.0313 37200 9640 6010 75300
5. 00 5. 5 . 5 000 0. .5 00 00 .5 5000 0 0
6.5000 8.8750 1.6250 63100 16400 10700 143000
5. 00 5. 5 . 5 000 0. .5 00 00 .5 5000 0A 0
6.5000 8.8750 1.6250 63100 16400 10700 143000
5. 00 . 50 . 5 5000 0. . 00 00 . 000 0 0
6.5000 9.7500 1.8750 84300 21900 16500 175000
5. 00 5 .000 .0 000 0. . 0 000 00 .5 000 50 00
6.5000 10.0000 1.8125 87400 22700 14300 145000
5. 00 . 5 .500 000 0. . 5 000 000 . 5 0 0000
6.5000 11.3750 2.5000 137000 35600 28600 242000
5. 00 . 5 .500 000 0. . 000 0 000 . 0000 HM 5 5 HM 5 0
6.5000 11.3750 2.5000 171000 44500 24300 278000
5. 00 . 5 .500 000 0. . 000 0 000 . 0000 HM 5 HM 5 0
6.5000 11.3750 2.5000 171000 44500 24300 278000
5. 00 . 50 .550 0 000 0. .5 000 5 000 .55 5 0000 EE 0 5
6.5000 11.7500 3.2500 204000 53000 34300 341000
5. 00 . 50 .550 0 000 0. .5 000 5 000 .55 5 0000 EE 0 5
6.5000 12.2500 3.2500 204000 53000 34300 341000
5. 00 . 50 .550 0 0000 0. . 000 5 000 . 0000 H 0 H 0
6.5000 12.2500 3.2500 233000 60400 34200 378000
5. 00 .550 .0 5 0000 0. . 000 000 .5 0000 HH 5 HH 5 0
6.5000 13.2500 3.6250 291000 75400 47900 434000
5. 00 . 50 0 . 0000 0. . 000 000 . 50000 EE 0 0 5 0
6.5000 14.2500 4.1875 319000 82600 47300 439000
5. 00 5.0 .0 5 0 0000 0. 0 . 0000 000 . 5 0000 EE 0 5
6.5000 14.3720 3.6250 243000 63000 43300 409000
. 5. 5 . 5 000 0. .5 00 00 .5 5000 0
6.5625 8.8750 1.6250 63100 16400 10700 143000
. 5 . 50 . 5 5000 0. . 00 00 . 000 0
6.6250 9.7500 1.8750 84300 21900 16500 175000
. 5 0. 00 5. 5 0000 0. 0. 000 5000 0. 00000 H H 0
6.6250 13.0000 3.3750 216000 56000 77500 316000
. 5 . 00 5. 5 0000 0. 0. 000 5000 0. 00000 H H
6.6250 13.5000 3.3750 216000 56000 77500 316000
0.000 0.000 .000 0000 0. .5 0 00 5 00 .5 5 0000 JHM5 JHM5 0
6.6929 9.0551 1.5354 69700 18100 11900 133000
0.000 0.000 .000 000 0. . 0 000 00 . 5 000 JM JM 0
6.6929 9.4488 1.8110 88400 22900 17200 171000
0.000 5 .000 .0 000 0. . 0 000 00 .5 000 00
6.6929 10.0000 1.8125 87400 22700 14300 145000
0.000 5 .000 .0 000 0. . 000 000 . 0000 M 5 M 5
6.6929 10.0000 1.8125 98500 25500 13900 166000
. 50 0. 50 . 5 05000 0. 0 . 5 000 0 000 . 5 0000 HM5 5 HM5 5 0
6.7500 10.2500 2.6250 136000 35300 24300 265000
. 5 . 50 . 5 5000 0. . 00 00 . 000 0
6.8750 9.7500 1.8750 84300 21900 16500 175000
. 5 . 50 . 5 5000 0. . 00 00 . 000 0
6.8750 9.7500 1.8750 84300 21900 16500 175000
. 5 0. 50 5 . 5 000 0. . 0 000 00 . 000 M 5 M 0
6.8750 10.2500 2.1250 112000 29000 16500 210000
. 5 . 5 .500 000 0. . 5 000 000 . 5 0 0000
6.8750 11.3750 2.5000 137000 35600 28600 242000
. 5 . 50 .550 0 000 0. .5 000 5 000 .55 5 0000 EE 0
6.8750 11.7500 3.2500 204000 53000 34300 341000
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 5 0. . .5 .0 .0 .5 0 .0 05.0 .50 . 0 5 0. . 5
1.0313 0.8125 0.34 0.06 6.77 6.85 0.06 8.23 8.07 0.10 0.06
5.18
. . .5 .5 .0 .0 . .0 0 .0 .00 .00 5 5 0. .
1.5625 1.3125 0.10 0.14 6.85 7.13 0.13 8.58 8.23 0.16 0.08
10.24
. . .5 .0 .0 .0 . .0 0 .0 .00 .00 5 5 0. .5
1.5625 1.3125 0.10 0.31 6.85 7.44 0.13 8.58 8.23 0.16 0.08
10.01
. 5 . 00 . .5 .0 5.0 . 0.0 .0 . 0 . 0 0. . 5
1.8750 1.5000 0.19 0.14 7.05 7.28 0.13 9.45 9.02 0.19 0.07
17.53
.0 . - .5 . .0 5.0 . .0 .0 . 0 . 0 0. 0 .55
1.8125 1.3125 -0.06 0.19 6.93 7.28 0.13 9.41 9.21 0.27 0.08
16.65
.500 . 5 -0. .0 .0 .0 . .0 5 .0 . 0 5. 0 . 0. .
2.5000 1.8750 -0.03 0.28 7.32 7.76 0.13 10.71 10.20 0.27 0.21
37.44
.500 . 5 - . .0 .0 5.0 . .5 .0 5. 0 . 0 5 0 0. .
2.5000 1.8750 -0.46 0.28 7.24 7.68 0.13 10.68 10.47 0.23 0.16
36.89
.500 . 5 - . .0 .0 5.0 . .5 .0 5. 0 . 0 5 0 0. .
2.5000 1.8750 -0.46 0.28 7.36 7.68 0.13 10.68 10.47 0.23 0.16
36.85
.550 .500 - 5. . 5.0 .0 . .0 .0 0.00 0. 0 . 0. .
3.2500 2.5000 -0.60 0.25 7.28 7.72 0.25 11.10 10.59 0.39 0.01
52.33
.550 .500 - 5. . 5.0 .0 . .0 5.0 0.00 0. 0 . 0. . 5
3.2500 2.5000 -0.60 0.25 7.28 7.72 0.25 11.10 10.83 0.39 0.01
58.97
.550 5.0 - .5 . .0 .0 . .5 0.0 . 0 . 0 . 0. 5 .
3.2500 2.5625 -0.73 0.25 7.40 7.80 0.25 11.36 11.02 0.32 0.08
59.80
5. 50 . 50 - . . .0 .0 . 0 .0 .0 . 0 .00 0 5 0. 0 .0
3.7500 2.7500 -0.84 0.13 7.72 7.72 0.25 12.12 11.69 0.46 0.04
81.66
0 . 5 . 00 - . .5 .0 5.0 . .0 .0 . 0 5. 0 . 0. .
4.1250 3.0000 -1.29 0.53 7.64 8.46 0.13 12.95 12.72 0.66 0.22 104.13
. .500 - 5.5 . .0 5.0 . .5 .0 . 0 . 0 50 0. 50 .5
3.4999 2.5000 -0.61 0.38 7.83 8.46 0.13 13.16 12.95 0.75 0.10
98.14
. . .5 .5 5.0 .0 . .0 0 .0 .00 .00 5 5 0. .5
1.5625 1.3125 0.10 0.14 6.89 7.17 0.13 8.58 8.23 0.16 0.08
9.95
. 5 . 00 . .5 .0 .0 . 0.0 .0 . 0 . 0 0. .
1.8750 1.5000 0.19 0.14 7.13 7.36 0.13 9.45 9.02 0.19 0.07
16.85
. 5 5 . 5 . . .5 .0 . .5 .0 . 0 . 0 . 0. 5 .
3.1250 2.1250 0.66 0.25 7.58 8.58 0.25 12.26 11.10 0.72 0.36
64.99
. 5 5 . 5 . . .5 .0 . .5 .0 . 0 . 0 . 0. 5 .
3.1250 2.1250 0.66 0.25 7.58 8.58 0.25 12.26 11.30 0.72 0.36
71.22
.000 .000 . .0 .0 .0 .5 .0 .0 .00 . 0 0 . 0. 50 .
1.4961 1.2205 0.18 0.12 7.01 7.24 0.10 8.82 8.54 0.04 0.13
9.46
.500 .000 5. .0 0.0 5.0 .5 .0 .0 . 0 .00 5 0. . 5
1.7520 1.4567 0.20 0.12 7.09 7.28 0.10 9.13 8.74 0.11 0.16
13.79
.0 . - .5 . 0.0 .0 . .0 .0 . 0 . 0 0. 0 .0
1.8125 1.3125 -0.06 0.19 7.09 7.44 0.13 9.41 9.21 0.27 0.08
15.63
.0 . - . . .0 .0 . 0.0 5.0 . 0 .00 5 0 0. 0 . 0
1.8125 1.3125 -0.18 0.19 7.17 7.44 0.13 9.45 9.25 0.19 0.12
16.09
. 5 5 . - . .5 .0 .0 . 50.0 .0 .00 . 0 50 0. .
2.6250 2.0625 -0.34 0.14 7.40 7.56 0.13 9.84 9.29 0.24 0.08
26.80
. 5 . 00 . .0 5.0 00.0 . 0.0 .0 . 0 . 0 0. .
1.8750 1.5000 0.19 0.31 7.28 7.87 0.13 9.45 9.02 0.19 0.07
15.20
. 5 . 00 . .5 5.0 .0 . 0.0 .0 . 0 . 0 0. .00
1.8750 1.5000 0.19 0.14 7.28 7.56 0.13 9.45 9.02 0.19 0.07
15.44
5 . 5 . 5 - . .5 .0 .0 . .0 .0 . 0 . 0 00 0. 50 .
2.1250 1.6250 -0.26 0.14 7.44 7.60 0.13 9.80 9.49 0.18 0.13
20.75
.500 . 5 -0. .0 .0 0 .0 . .0 5 .0 . 0 5. 0 . 0. 5.
2.5000 1.8750 -0.03 0.28 7.60 8.03 0.13 10.71 10.20 0.27 0.21
34.65
.550 .500 - 5. . .0 0 .0 . .0 .0 0.00 0. 0 . 0. .0
3.2500 2.5000 -0.60 0.25 7.60 8.03 0.25 11.10 10.59 0.39 0.01
48.70
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 5 . 50 .550 0 000 0. .5 000 5 000 .55 5 0000 EE 0
6.8750 12.2500 3.2500 204000 53000 34300 341000
. 5 . 50 .550 0 0000 0. . 000 5 000 . 0000 H H 0
6.8750 12.2500 3.2500 233000 60400 34200 378000
. 00 5. 00 0. 000 0. 5 . 00 00 . 0 5 000 LL 5 LL 5 0
7.0000 8.5000 0.8125 25500 6600 5090 56600
. 00 . 50 . 5 5000 0. . 00 00 . 000 0 0
7.0000 9.7500 1.8750 84300 21900 16500 175000
. 00 . 50 . 5 5000 0. . 00 00 . 000 0
7.0000 9.7500 1.8750 84300 21900 16500 175000
. 00 0. 50 5 . 5 000 0. . 0 000 00 . 000 M M 0
7.0000 10.2500 2.1250 112000 29000 16500 210000
. 00 0. 50 5 . 5 000 0. . 0 000 00 . 000 M M 0
7.0000 10.2500 2.1250 112000 29000 16500 210000
. 00 . 5 55.5 50 000 0. . 0 000 00 . 000 M 0 M 0
7.0000 10.6250 2.1875 114000 29600 16800 225000
. 00 . 5 .500 000 0. . 5 000 000 . 5 0 0000 00
7.0000 11.3750 2.5000 137000 35600 28600 242000
. 00 . 5 .500 000 0. . 000 0 000 . 0000 HM 5 5 HM 5 0
7.0000 11.3750 2.5000 171000 44500 24300 278000
. 00 . 50 .500 000 0. . 5 000 000 . 5 0 0000 00
7.0000 11.7500 2.5000 137000 35600 28600 242000
. 00 . . 00 0 0000 0. . 000 5000 . 5 0000 H 0 H 0
7.0000 12.5970 3.5000 231000 59900 32700 356000
. 00 0. 5 . 00 0 0000 0. . 000 5000 . 5 0000 H 0 H
7.0000 12.6250 3.5000 231000 59900 32700 356000
. 00 .0 5 0. 000 0. . 5 000 000 . 0 5 0000 EE 00 X 0
7.0000 12.8750 3.5625 224000 58100 36300 354000
. 00 0. 00 0. 000 0. . 5 000 000 . 0 5 0000 EE 00 0 0
7.0000 13.0000 3.5625 224000 58100 36300 354000
. 00 0. 00 0. 000 0. . 5 000 000 . 0 5 0000 EE 00 X 0 0
7.0000 13.0000 3.5625 224000 58100 36300 354000
. 00 .550 0. 000 0. . 5 000 000 . 0 5 0000 EE 00 0
7.0000 13.2500 3.5625 224000 58100 36300 354000
. 00 55. 00 . 000 0. 0 .50 0000 000 . 0 0000 EE 0 05 00
7.0000 14.0000 2.4375 182000 47300 32300 243000
. 00 0.000 .0 5 0 0000 0. 0 . 0000 000 . 5 0000 EE 0 0
7.0000 14.1732 3.6250 243000 63000 43300 409000
. 00 5.0 .0 5 0 0000 0. 0 . 0000 000 . 5 0000 EE 0 0
7.0000 14.3720 3.6250 243000 63000 43300 409000
. 00 . 00 .0 5 0 0000 0. 0 . 0000 000 . 5 0000 EE 0 0 50
7.0000 14.5000 3.6250 243000 63000 43300 409000
. 00 . 5 0 . 0000 0. 0. 000 000 0. 00000 EE 50 0 5
7.0000 16.8750 4.1875 289000 74900 97200 382000
. 5 .500 .500 000 0.5 . 5 5000 5 000 . 0000 0 5
7.0856 12.5000 2.5000 152000 39500 35300 290000
0.000 50.000 .000 0 000 0. . 5 0 000 5500 . 000 JM A JM 0
7.0866 9.8425 1.8504 90100 23400 19200 177000
0.000 50.000 .000 0 000 0. . 5 0 000 5500 . 000 JM JM 0
7.0866 9.8425 1.8504 90100 23400 19200 177000
. 50 . 50 .000 000 0. . 00 00 . 550000 LM LM 0
7.2500 9.2500 1.3386 59100 15300 8780 124000
. 50 5. .000 000 0. . 00 00 . 550000 LM LM 0A
7.2500 9.2610 1.3386 59100 15300 8780 124000
. 50 .5 . 000 0. 0 . 00 00 . 5 000 LL5 LL5 0
7.2500 9.3125 1.0312 36100 9360 6440 75700
B
Caption:
Caption:
C
D
B
d
a
B 0 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.550 .500 - 5. . .0 0 .0 . .0 5.0 0.00 0. 0 . 0. 5. 0
3.2500 2.5000 -0.60 0.25 7.60 8.03 0.25 11.10 10.83 0.39 0.01
55.34
.550 5.0 - .5 . 5.0 05.0 . .5 0.0 . 0 . 0 . 0. 5 5.
3.2500 2.5625 -0.73 0.25 7.68 8.07 0.25 11.36 11.02 0.32 0.08
56.18
0. 5.0 . .5 .0 .0 .5 .0 0 .0 . 0 . 0 0. 5 .
0.8125 0.5938 0.70 0.06 7.24 7.32 0.06 8.35 8.15 0.05 0.06
3.18
. 5 . 00 . .5 .0 .0 . 0.0 .0 . 0 . 0 0. .
1.8750 1.5000 0.19 0.14 7.40 7.64 0.13 9.45 9.02 0.19 0.07
14.72
. 5 . 00 . 0.5 .0 0 .0 . 0.0 .0 . 0 . 0 0. .
1.8750 1.5000 0.19 0.41 7.40 8.19 0.13 9.45 9.02 0.19 0.07
14.25
5 . 5 . 5 - . .0 .0 0 .0 . .0 .0 . 0 . 0 00 0. 50 .
2.1250 1.6250 -0.26 0.31 7.52 8.03 0.13 9.80 9.49 0.18 0.13
19.68
5 . 5 . 5 - . .5 .0 5.0 . .0 .0 . 0 . 0 00 0. 50 .0
2.1250 1.6250 -0.26 0.14 7.52 7.68 0.13 9.80 9.49 0.18 0.13
19.93
55.5 . - . .5 .0 .0 . 5 .0 50.0 5. 0 . 0 0. 0 0. 5
2.1875 1.6875 -0.24 0.14 7.64 7.80 0.13 10.08 9.84 0.23 0.08
24.15
.500 . 5 -0. .0 5.0 0 .0 . .0 5 .0 . 0 5. 0 . 0. 5.
2.5000 1.8750 -0.03 0.28 7.68 8.15 0.13 10.71 10.20 0.27 0.21
33.68
.500 . 5 - . .0 .0 05.0 . .5 .0 5. 0 . 0 5 0 0. 5.0
2.5000 1.8750 -0.46 0.28 7.64 8.07 0.13 10.68 10.47 0.23 0.16
33.12
.500 . 5 -0. .0 5.0 0 .0 . .0 .0 . 0 5. 0 . 0. .
2.5000 1.8750 -0.03 0.28 7.68 8.15 0.13 10.71 10.35 0.27 0.21
37.29
5. 5 5.0 - . .5 .0 0 .0 . 00.5 .0 .50 . 0 0 0. 0. .5
3.3750 2.5625 -0.88 0.14 7.80 7.95 0.19 11.84 11.54 0.45 0.11
60.68
5. 5 5.0 - . .5 .0 0 .0 . 00.5 .0 .50 . 0 0 0. 0. .
3.3750 2.5625 -0.88 0.14 7.80 7.95 0.19 11.84 11.54 0.45 0.11
61.08
.0 5 .500 - . . 0 .0 .0 . 0 .5 .0 * * 05 0. 0 0.
3.6250 2.5000 -0.86 0.38 7.91 8.54 0.25 12.07 11.57 * *
67.07
.0 5 .500 - . .5 0 .0 5.0 . 0 .5 5.0 * * 05 0. 0 .
3.6250 2.5000 -0.86 0.53 7.91 8.86 0.25 12.07 11.61 * *
68.95
.0 5 .500 - . . 0 .0 .0 . 0 .5 5.0 * * 05 0. 0 .
3.6250 2.5000 -0.86 0.38 7.91 8.54 0.25 12.07 11.61 * *
69.40
.0 5 .500 - . .5 0 .0 5.0 . 0 .5 .0 * * 05 0. 0 .
3.6250 2.5000 -0.86 0.53 7.91 8.86 0.25 12.07 11.73 * *
72.60
0. 5 . 5 -0. . 0 .0 0 .0 . .0 0.0 . 0 5.50 . 0. 5 .
2.3750 1.6250 -0.01 0.19 8.23 8.15 0.19 12.64 12.60 0.30 0.22
53.41
. .500 - 5.5 . 0 .0 .0 . .5 .0 . 0 . 0 50 0. 50 0.5
3.4999 2.5000 -0.61 0.50 8.19 9.09 0.13 13.16 12.87 0.75 0.10
89.37
. .500 - 5.5 . 0 .0 .0 . .5 .0 . 0 . 0 50 0. 50 .
3.4999 2.5000 -0.61 0.50 8.19 9.09 0.13 13.16 12.95 0.75 0.10
92.51
. .500 - 5.5 . 0 .0 .0 . .5 .0 . 0 . 0 50 0. 50 .
3.4999 2.5000 -0.61 0.50 8.19 9.09 0.13 13.16 13.03 0.75 0.10
94.56
5. 50 . .0 . .0 0.0 . .0 5.0 . 0 .00 . 0. 5 .5
3.7500 2.4375 0.51 0.25 8.70 9.06 0.25 15.08 14.37 0.83 0.63 137.95
.500 .0 . .5 0 .0 0 .0 . 00.0 .0 . 0 . 0 0. 0 .
2.5000 1.8125 0.31 0.14 8.03 8.23 0.13 11.81 11.26 0.36 0.17
46.71
5.000 .000 . .5 0.0 0 .0 .5 .5 .0 . 0 . 0 5 0. . 0
1.7717 1.4567 0.35 0.37 7.48 8.23 0.10 9.55 9.13 0.13 0.16
14.54
5.000 .000 . .0 0.5 .0 .5 .5 .0 . 0 . 0 5 0. .
1.7717 1.4567 0.35 0.12 7.50 7.72 0.10 9.55 9.13 0.13 0.16
14.64
.000 .000 5. .0 .0 5.0 .0 .0 .0 0. 0 . 0 55 0. 5 .
1.2992 1.1024 0.20 0.08 7.52 7.68 0.08 9.02 8.82 0.02 0.14
7.37
.000 .000 5. .0 .0 5.0 .0 .0 .0 0. 0 . 0 55 0. 5 .
1.2992 1.1024 0.20 0.08 7.52 7.68 0.08 9.02 8.82 0.02 0.14
7.42
5. 00 .050 . .5 .0 .0 .5 0.0 5.0 . 0 . 0 0. .5
1.0000 0.7500 0.54 0.06 7.56 7.64 0.06 9.06 8.86 0.12 0.06
5.71
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 50 . 00 . 5 000 0. . 00 00 . 5000 0
7.2500 10.5000 1.8750 86700 22500 18400 188000
. 5 . 00 . 5 000 0. . 00 00 . 5000 0
7.3750 10.5000 1.8750 86700 22500 18400 188000
. 5 . 5 55.5 50 000 0. . 0 000 00 . 000 M M 0
7.3750 10.6250 2.1875 114000 29600 16800 225000
. 5 .5 5 50. 00 000 0. . 0 000 00 . 000
7.3750 11.1250 2.0000 89400 23200 16500 156000
. 5 0. 5 . 00 0 0000 0. . 000 5000 . 5 0000 H H
7.3750 12.6250 3.5000 231000 59900 32700 356000
0.000 0.000 .000 000 0. . 0 000 500 . 0 000 JM JM 0
7.4803 10.2362 1.8110 89700 23300 19000 181000
0.000 . 5 55.5 0 50 000 0. . 0 000 00 . 000 JM M 0
7.4803 10.6250 2.1875 114000 29600 16800 225000
0.0 . .000 000 0. . 00 00 . 5000 5
7.4834 11.4170 1.8110 86700 22500 18400 188000
0.500 . 00 . 5 000 0. . 00 00 . 5000 5 0
7.5000 10.5000 1.8750 86700 22500 18400 188000
0.500 .5 5 50. 00 000 0. . 0 000 00 . 000 50
7.5000 11.1250 2.0000 89400 23200 16500 156000
0.500 . 55.5 5 5000 0. . 000 00 . 0 0000
7.5000 11.1875 2.1875 127000 33000 20200 239000
0.500 . 5 55.5 5 5000 0. . 000 00 . 0 0000 0
7.5000 11.3750 2.1875 127000 33000 20200 239000
0.500 .500 .500 000 0.5 . 5 5000 5 000 . 0000 50 5
7.5000 12.5000 2.5000 152000 39500 35300 290000
0.500 .0 5 0. 000 0. . 5 000 000 . 0 5 0000 EE 00 5 0
7.5000 12.8750 3.5625 224000 58100 36300 354000
0.500 0. 00 .500 000 0. .5 000 000 .5 050000 EE 0 5 00
7.5000 13.0000 2.5000 149000 38700 25500 235000
0.500 .550 0. 000 0. . 5 000 000 . 0 5 0000 EE 00 5 0
7.5000 13.2500 3.5625 224000 58100 36300 354000
0.500 .550 . 5 0000 0.5 .0 000 000 .0 050000 HH 0 HH 0 0
7.5000 13.2500 3.8750 254000 65800 64900 460000
0.500 0.000 .0 5 0 0000 0. 0 . 0000 000 . 5 0000 EE 0 5
7.5000 14.1732 3.6250 243000 63000 43300 409000
0.500 5.0 .0 5 0 0000 0. 0 . 0000 000 . 5 0000 EE 0 5
7.5000 14.3720 3.6250 243000 63000 43300 409000
0.500 . 00 .0 5 0 0000 0. 0 . 0000 000 . 5 0000 EE 0 5 50
7.5000 14.5000 3.6250 243000 63000 43300 409000
0.500 . 5 0 . 0000 0. 0. 000 000 0. 00000 EE 50 50 5
7.5000 16.8750 4.1875 289000 74900 97200 382000
.0 . 00 . 5 000 0. . 00 00 . 5000 0
7.5625 10.5000 1.8750 86700 22500 18400 188000
. 5 .5 5 50. 00 000 0. . 0 000 00 . 000
7.6250 11.1250 2.0000 89400 23200 16500 156000
. 50 5 . 5 . 5000 0. 5 . 00 5 00 . 000 LM LM 0
7.7500 10.1250 1.5625 66300 17200 13100 161000
. 50 . 00 . 5000 0. 5 . 00 5 00 . 000 LM LM
7.7500 10.5000 1.5625 66300 17200 13100 161000
. 50 .500 .500 000 0.5 . 5 5000 5 000 . 0000 5 5
7.7500 12.5000 2.5000 152000 39500 35300 290000
00.000 00.000 5.000 000 0.5 . 5 000 5 000 . 0000 JHM 0 JHM 0 0
7.8740 11.8110 2.5591 153000 39700 35500 287000
00.0 5 . 00 5 . 5 5 000 0. . 0 5 000 00 . 0000 M 5 M 5 0
7.8750 11.5000 2.2813 132000 34300 19500 263000
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. . 00 0. .5 .0 0 .0 . 5 .0 .0 5. 0 . 0 0. 0 .
1.8438 1.5000 0.40 0.14 7.80 8.03 0.13 10.20 9.69 0.20 0.07
18.98
. . 00 0. .5 0 .0 0 .0 . 5 .0 .0 5. 0 . 0 0. 0 .
1.8438 1.5000 0.40 0.14 7.91 8.11 0.13 10.20 9.69 0.20 0.07
18.23
55.5 . - . .5 0 .0 05.0 . 5 .0 50.0 5. 0 . 0 0. 0 .
2.1875 1.6875 -0.24 0.14 7.91 8.07 0.13 10.08 9.84 0.23 0.08
21.53
. 5 .5 . .5 0 .0 0 .0 . .5 .0 . 0 . 0 5 5 0. 55 .
1.8750 1.4375 0.15 0.14 7.91 8.15 0.13 10.50 10.28 0.34 0.10
21.56
5. 5 5.0 - . 5.5 05.0 .0 . 00.5 .0 .50 . 0 0 0. 0. 5.
3.3750 2.5625 -0.88 0.22 8.07 8.43 0.19 11.84 11.54 0.45 0.11
56.94
.000 .500 0. .0 00.0 0 .0 .5 5 .0 .0 . 0 .00 5 0. 5 .
1.7323 1.4370 0.43 0.12 7.87 8.11 0.10 9.92 9.53 0.13 0.16
15.06
55.5 . - . .0 0 .0 0 .0 . 5 .0 50.0 5. 0 . 0 0. 0 .
2.1875 1.6875 -0.24 0.12 7.99 8.11 0.13 10.08 9.84 0.23 0.08
20.89
.000 5. 0. . 0 .0 .0 . 5 .0 5 .0 . 0 . 0 0. 0 0.5
1.8110 1.4173 0.42 0.25 7.99 8.43 0.13 10.20 10.08 0.18 0.08
23.29
. . 00 0. .5 0 .0 0 .0 . 5 .0 .0 5. 0 . 0 0. 0 .
1.8438 1.5000 0.40 0.14 7.99 8.23 0.13 10.20 9.69 0.20 0.07
17.47
. 5 .5 . .5 0 .0 0 .0 . .5 .0 . 0 . 0 5 5 0. 55 .
1.8750 1.4375 0.15 0.14 7.99 8.23 0.13 10.50 10.28 0.34 0.10
20.79
55.5 . - . .5 0 .0 0.0 . .0 .0 5. 0 . 0 05 0. .55
2.1875 1.6875 -0.11 0.14 7.99 8.27 0.13 10.67 10.35 0.21 0.09
25.46
55.5 . - . .5 0 .0 0.0 . .0 5.0 5. 0 . 0 05 0. .
2.1875 1.6875 -0.11 0.14 7.99 8.27 0.13 10.67 10.43 0.21 0.09
27.04
.500 .0 . . .0 .0 . 00.0 .0 . 0 . 0 0. 0 . 5
2.5000 1.8125 0.31 0.17 8.35 8.58 0.13 11.81 11.26 0.36 0.17
43.32
.0 5 .500 - . . 0.0 0.0 . 0 .5 .0 * * 05 0. 0 .
3.6250 2.5000 -0.86 0.25 8.27 8.66 0.25 12.07 11.57 * *
61.49
. . - . .0 0.0 .0 . 00.0 .0 . 0 .00 0. . 5
2.4375 1.6875 -0.18 0.28 8.27 8.70 0.13 11.81 11.77 0.46 0.16
43.75
.0 5 .500 - . . 0.0 0.0 . 0 .5 .0 * * 05 0. 0 0.
3.6250 2.5000 -0.86 0.25 8.27 8.66 0.25 12.07 11.73 * *
67.48
5. 50 .0 5 -5. . 5.5 .0 . .0 0.0 .50 5. 0 0 0 0 0. 05 5.
3.7500 2.8750 -0.22 0.25 8.49 9.21 0.25 12.52 11.42 0.57 0.20
78.18
. .500 - 5.5 . .0 .0 . .5 .0 . 0 . 0 50 0. 50 .
3.4999 2.5000 -0.61 0.25 8.58 8.94 0.13 13.16 12.87 0.75 0.10
84.34
. .500 - 5.5 . .0 .0 . .5 .0 . 0 . 0 50 0. 50 .
3.4999 2.5000 -0.61 0.25 8.58 8.94 0.13 13.16 12.95 0.75 0.10
87.48
. .500 - 5.5 . .0 .0 . .5 .0 . 0 . 0 50 0. 50 0.
3.4999 2.5000 -0.61 0.25 8.58 8.94 0.13 13.16 13.03 0.75 0.10
89.53
5. 50 . .0 . .0 0.0 . .0 5.0 . 0 .00 . 0. 5 5 .
3.7500 2.4375 0.51 0.25 9.33 9.45 0.25 15.08 14.37 0.83 0.63 131.70
. . 00 0. 0.5 0 .0 .0 . 5 .0 .0 5. 0 . 0 0. 0 .5
1.8438 1.5000 0.40 0.41 8.03 8.78 0.13 10.20 9.69 0.20 0.07
16.58
. 5 .5 . .5 0 .0 .0 . .5 .0 . 0 . 0 5 5 0. 55 .0
1.8750 1.4375 0.15 0.14 8.11 8.31 0.13 10.50 10.28 0.34 0.10
20.00
. 0. . .5 0 .0 .0 . 5 .0 .0 . 0 . 0 0. 5.
1.5625 1.1875 0.45 0.14 8.11 8.39 0.13 9.88 9.41 0.14 0.08
11.60
. 0. . .5 0 .0 .0 . 5 .0 .0 . 0 . 0 0. .
1.5625 1.1875 0.45 0.14 8.11 8.39 0.13 9.92 9.57 0.14 0.08
13.58
.500 .0 . . .0 .0 . 00.0 .0 . 0 . 0 0. 0 .
2.5000 1.8125 0.31 0.17 8.50 8.78 0.13 11.81 11.26 0.36 0.17
41.20
.000 5 .000 . .5 5.0 .0 .5 .0 .0 . 0 . 0 5 0. 5.
2.4409 2.0079 0.32 0.14 8.46 8.78 0.10 11.37 10.75 0.19 0.24
33.92
5 . 5 .0 - . .5 5.0 .0 . .0 .0 . 0 .00 5 0. .50
2.2813 1.8125 -0.19 0.14 8.46 8.62 0.13 10.98 10.71 0.19 0.08
27.55
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
00.0 5 .500 .500 000 0.5 . 5 5000 5 000 . 0000
5
J A
EE 0 00
H 5 5 H 5 0
HH HH
EE 0
EE 0 50
LL LL 0
LM LM 0
0
M 5 C M 5 0
M 5 M 5 0
EE 0 5
00 5
00A 5
EE 0 0
EE 0 0
EE 0 0 50
EE 0 0 0
EE 00 0 0 0
M 5 M 5 0
0 A 5
5 0
EE 0 5
H H 0
0
7.8750 12.5000 2.5000 152000 39500 35300 290000
00.0 5 .500 . 000 0.5 . 5 5000 5 000 . 0000
B
Caption:
7.8750 12.5000 2.6875 152000 39500 35300 290000
00.0 5 0.000 .500 000 0.5 . 5 5000 5 000 . 0000
7.8750 12.5984 2.5000 152000 39500 35300 290000
00.0 5 55. 00 . 50 000 0. . 0 000 000 . 00000
7.8750 14.0000 2.7500 175000 45500 25700 314000
00.0 5 . 5 . 0000 0. . 0 000 000 . 0000
7.8750 15.1250 4.4375 369000 95700 54500 699000
00.0 5 . 00 . 5 50000 0. 0 .0 000 000 . 00000
Caption:
7.8750 15.5000 4.3750 370000 96000 49100 585000
0 . 5.0 .0 5 0 0000 0. 0 . 0000 000 . 5 0000
7.9375 14.3720 3.6250 243000 63000 43300 409000
0 . . 00 .0 5 0 0000 0. 0 . 0000 000 . 5 0000
7.9375 14.5000 3.6250 243000 63000 43300 409000
0 . 00 . .5 5 000 0. . 00 00 . 05000
T
C
8.0000 10.2812 1.1250 43200 11200 7850 91100
0 . 00 . 5 . 0 000 0. . 05000 5 500 . 000
8.0000 10.8750 1.6875 91300 23700 12900 182000
0 . 00 .5 5 .0 000 0.5 . 0 000 00 . 5 000
D
8.0000 11.1250 1.8125 88300 22900 19900 197000
0 . 00 . 00 5 . 5 5 000 0. . 0 5 000 00 . 0000
B
d
8.0000 11.5000 2.2813 132000 34300 19500 263000
0 . 00 . 00 5 . 5 5 000 0. . 0 5 000 00 . 0000
8.0000 11.5000 2.2813 132000 34300 19500 263000
0 . 00 .500 5 . 5 5 000 0. . 000 000 . 00000
a
8.0000 12.5000 2.1250 116000 30200 16200 202000
0 . 00 .500 .500 000 0.5 . 5 5000 5 000 . 0000
8.0000 12.5000 2.5000 152000 39500 35300 290000
0 . 00 .500 .500 000 0.5 . 5 5000 5 000 . 0000
8.0000 12.5000 2.5000 152000 39500 35300 290000
0 . 00 0.000 .0 5 0 0000 0. 0 . 0000 000 . 5 0000
8.0000 14.1732 3.6250 243000 63000 43300 409000
0 . 00 5.0 .0 5 0 0000 0. 0 . 0000 000 . 5 0000
8.0000 14.3720 3.6250 243000 63000 43300 409000
0 . 00 . 00 .0 5 0 0000 0. 0 . 0000 000 . 5 0000
8.0000 14.5000 3.6250 243000 63000 43300 409000
0 . 00 0 . 00 .0 5 0 0000 0. 0 0. 5 0000 000 0. 0000
8.0000 16.0000 3.6250 234000 60700 82900 328000
0 . 00 . 00 . 5 0000 0. 0. 000 5 000 0. 0 0000
8.0000 19.0000 4.6250 317000 82200 122000 453000
0 . . 00 5 . 5 5 000 0. . 0 5 000 00 . 0000
8.0625 11.5000 2.2813 132000 34300 19500 263000
0 . .500 .500 000 0.5 . 5 5000 5 000 . 0000
8.0625 12.5000 2.5000 152000 39500 35300 290000
0 . 5 .5 5 .0 000 0.5 . 0 000 00 . 5 000
8.1250 11.1250 1.8125 88300 22900 19900 197000
0 . 5 .500 5 . 5 5 000 0. . 000 000 . 00000
8.1250 12.5000 2.1250 116000 30200 16200 202000
0 . 5 .550 . 5 50000 0. . 0 5000 5000 . 0000
8.1250 13.2500 3.8750 282000 73100 41600 522000
0 .550 . 00 .0 000 0.5 . 0 000 00 . 5 000
8.2500 11.0000 1.8125 88300 22900 19900 197000
0 .550 .5 5 .0 000 0.5 . 0 000 00 . 5 000
8.2500 11.1250 1.8125 88300 22900 19900 197000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.500 .0 . . .0 5.0 . 00.0 .0 . 0 . 0 0. 0 . 0
2.5000 1.8125 0.31 0.17 8.62 8.86 0.13 11.81 11.26 0.36 0.17
40.11
.500 50. 00 . . .0 5.0 . 00.0 5.0 . 0 . 0 0. 0 . 0
2.5000 2.0000 0.31 0.17 8.62 8.86 0.13 11.81 11.22 0.36 0.17
42.10
.500 .0 . . .0 5.0 . .0 .0 . 0 . 0 0. 0 .
2.5000 1.8125 0.31 0.17 8.62 8.86 0.13 11.73 11.30 0.36 0.17
41.10
. 50 . - . . .0 .0 .5 0.5 .0 . 0 . 0 0 0. 5 .0
2.7500 1.9375 -0.39 0.27 8.90 9.29 0.06 13.01 12.95 0.48 0.13
61.93
. 0. - . . .0 .0 . .0 .0 0. 0 . 0 0 0. 0.
4.4375 3.5625 -1.10 0.25 9.09 9.49 0.25 14.26 13.62 0.40 0.11 132.67
. 5 . - . . .0 5.0 . 5 .5 5 .0 5. 0 . 0 0 0. 5 .
4.3750 3.3125 -1.33 0.25 8.90 9.25 0.25 14.04 13.86 0.62 0.06 129.37
. .500 - 5.5 . .0 .0 . .5 .0 . 0 . 0 50 0. 50 .
3.4999 2.5000 -0.61 0.13 8.90 9.02 0.13 13.16 12.95 0.75 0.10
82.39
. .500 - 5.5 . .0 .0 . .5 .0 . 0 . 0 50 0. 50 . 0
3.4999 2.5000 -0.61 0.13 8.90 9.02 0.13 13.16 13.03 0.75 0.10
84.44
. . 5. .5 .0 .0 .5 5 .0 .0 . 0 . 0 5 0. .
1.0938 0.8438 0.62 0.06 8.35 8.43 0.06 10.00 9.80 0.12 0.07
7.64
. . . .5 .0 0.0 . .0 0.0 . 0 . 0 0. 0 .
1.6875 1.3438 0.07 0.14 8.43 8.66 0.13 10.51 10.24 0.11 0.05
15.35
.0 .5 .0 .5 .0 .0 . 5.0 0.0 .50 . 0 0 0. . 5
1.8125 1.4375 0.63 0.14 8.50 8.74 0.13 10.83 10.24 0.18 0.07
19.06
5 . 5 .0 - . .5 .0 .0 . .0 .0 . 0 .00 5 0. .0
2.2813 1.8125 -0.19 0.14 8.54 8.70 0.13 10.98 10.71 0.19 0.08
26.55
5 . 5 .0 - . .5 .0 .0 . .0 .0 . 0 .00 5 0. .0
2.2813 1.8125 -0.19 0.14 8.54 8.70 0.13 10.98 10.71 0.19 0.08
26.55
5 . 5 . 5 - . .0 .0 5.0 . .0 .0 0. 0 . 0 5 0. .
2.1250 1.3750 -0.24 0.16 8.58 8.86 0.13 11.54 11.57 0.42 0.13
30.57
.500 .0 . . .0 .0 . 00.0 .0 . 0 . 0 0. 0 . 0
2.5000 1.8125 0.31 0.17 8.74 8.94 0.13 11.81 11.26 0.36 0.17
39.01
.500 .0 . .0 .0 .0 . 00.0 .0 . 0 . 0 0. 0 .5
2.5000 1.8125 0.31 0.31 8.74 9.21 0.13 11.81 11.26 0.36 0.17
38.77
. .500 - 5.5 . .0 0.0 . .5 .0 . 0 . 0 50 0. 50 5.5
3.4999 2.5000 -0.61 0.13 8.94 9.06 0.13 13.16 12.87 0.75 0.10
78.47
. .500 - 5.5 . .0 0.0 . .5 .0 . 0 . 0 50 0. 50 .0
3.4999 2.5000 -0.61 0.13 8.94 9.06 0.13 13.16 12.95 0.75 0.10
81.62
. .500 - 5.5 . .0 0.0 . .5 .0 . 0 . 0 50 0. 50 . 5
3.4999 2.5000 -0.61 0.13 8.94 9.06 0.13 13.16 13.03 0.75 0.10
83.67
5. 5 5 . 50 . . .0 .0 . .5 .0 .00 0. 0 5 0. 0. 5 .
3.3750 2.2500 0.98 0.25 9.33 9.69 0.25 14.71 13.74 0.75 0.42
98.58
5. 50 .0 5 . . .0 0.0 . .5 0 .0 . 0 . 0 00 0 0. .5
3.7500 2.8750 1.35 0.25 10.79 11.02 0.25 16.87 15.83 0.88 0.67 195.20
5 . 5 .0 - . .5 .0 .0 . .0 .0 . 0 .00 5 0. .
2.2813 1.8125 -0.19 0.14 8.62 8.78 0.13 10.98 10.71 0.19 0.08
26.04
.500 .0 . . .0 .0 . 00.0 .0 . 0 . 0 0. 0 .
2.5000 1.8125 0.31 0.17 8.78 9.02 0.13 11.81 11.26 0.36 0.17
38.46
.0 .5 .0 .5 .0 .0 . 5.0 0.0 .50 . 0 0 0. .
1.8125 1.4375 0.63 0.14 8.62 8.82 0.13 10.83 10.24 0.18 0.07
18.25
5 . 5 . 5 - . .0 0.0 .0 . .0 .0 0. 0 . 0 5 0. .
2.1250 1.3750 -0.24 0.16 8.66 8.94 0.13 11.54 11.57 0.42 0.13
29.62
00.0 . - 5. . .0 .0 . .0 0 .0 . 0 . 0 00 5 0. 5 .0
3.9375 3.0625 -1.00 0.13 8.94 9.09 0.13 12.51 12.05 0.44 0.07
72.76
.0 .5 .0 .5 .0 .0 . .0 5 .0 .50 . 0 0 0. .
1.8125 1.4375 0.63 0.14 8.70 8.94 0.13 10.75 10.20 0.18 0.07
16.49
.0 .5 .0 .5 .0 .0 . 5.0 0.0 .50 . 0 0 0. .
1.8125 1.4375 0.63 0.14 8.70 8.94 0.13 10.83 10.24 0.18 0.07
17.43
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
0 .550 .500 .500 000 0.5 . 5 5000 5 000 . 0000 5 5
8.2500 12.5000 2.5000 152000 39500 35300 290000
0 .550 .500 .500 000 0.5 . 5 5000 5 000 . 0000 5A 5
8.2500 12.5000 2.5000 152000 39500 35300 290000
0 .550 .500 . 000 0.5 . 5 5000 5 000 . 0000 5
8.2500 12.5000 2.6875 152000 39500 35300 290000
0 .550 55. 00 . 0 000 0.5 .0 000 000 0. 0000 5 0
8.2500 14.0000 2.6875 158000 41000 41400 319000
. 5 5. 50 .0 000 0. . 5 0 000 5000 . 000 LM 5 LM 0
8.3750 11.2500 1.8125 89500 23200 19100 200000
5. 00 5. 50 .0 000 0. . 5 0 000 5000 . 000 LM AA LM 0
8.5000 11.2500 1.8125 89500 23200 19100 200000
5. 00 5. 50 .0 000 0. . 5 0 000 5000 . 000 LM LM 0
8.5000 11.2500 1.8125 89500 23200 19100 200000
5. 00 . 5 .0 000 0. . 5 0 000 5000 . 000 LM LM
8.5000 11.3750 1.8125 89500 23200 19100 200000
5. 00 0.0 0 . 50 000 0. .5 5 00 00 .5 5 000 5 0 5 5
8.5000 11.4177 1.2500 49800 12900 8510 102000
5. 00 55. 00 . 50 000 0. . 0 000 000 . 00000 EE 0 5 00
8.5000 14.0000 2.7500 175000 45500 25700 314000
5. 00 0.000 .550 0 0000 0. 0 . 0000 000 . 5 0000 EE 0 50
8.5000 14.1732 3.2500 243000 63000 43300 409000
5. 00 5.0 .550 0 0000 0. 0 . 0000 000 . 5 0000 EE 0 50
8.5000 14.3720 3.2500 243000 63000 43300 409000
. 0.0 0 . 50 000 0. .5 5 00 00 .5 5 000 5 0 5
8.6602 11.4177 1.2500 49800 12900 8510 102000
0. . 5 . 000 0. . 0 5000 00 . 0000 M A M 0
8.6875 12.3750 2.4375 143000 37100 21100 279000
0. . 5 . 000 0. . 0 000 0 000 . 0000 M M 0
8.6875 12.3750 2.4375 153000 39700 22600 308000
. 5. 5 .0 0 000 0.50 . 0 05000 00 . 000 LM 0 LM 0 0
8.8125 11.6250 1.8125 90700 23500 20100 207000
5. 5 55. 00 . 50 000 0. . 0 000 000 . 00000 EE 0 00
8.8750 14.0000 2.7500 175000 45500 25700 314000
5. 5 00.050 . 00 00000 0. . 000 5000 . 0000 EE 0 5 5
8.8750 15.7500 3.5000 248000 64200 48300 432000
. . 00 .0 5 0 0000 0. 0. 000 000 0. 00000 EE 0 0
8.9920 17.0000 3.6250 245000 63500 96000 361000
. 0 . 00 .0 5 0 0000 0. 0. 000 000 0. 00000 EE 0 0
8.9945 17.0000 3.6250 245000 63500 96000 361000
. 00 0. 5 50. 00 000 0. . 000 00 . 0 000 00
9.0000 12.6250 2.0000 97000 25100 21000 185000
. 00 .0 5 5 . 000 0. . 000 00 . 0 000 00
9.0000 12.8750 2.0625 97000 25100 21000 185000
. 00 55. 00 . 0 000 0.5 .0 000 000 0. 0000 00 0
9.0000 14.0000 2.6875 158000 41000 41400 319000
. 00 55. 00 . 50 000 0. . 0 000 000 . 00000 EE 0 0 00
9.0000 14.0000 2.7500 175000 45500 25700 314000
. 00 55. 00 . 50 000 0. . 000 000 . 0000 HM HM 0
9.0000 14.0000 2.7500 210000 54300 44000 380000
. 00 5 . 5 . 000 0. . 0 000 000 . 50000 M M 0
9.0000 14.1250 2.8125 202000 52200 29700 416000
. 00 00.050 . 00 00000 0. . 000 5000 . 0000 EE 0 00 5 5
9.0000 15.7500 3.5000 248000 64200 48300 432000
. 00 . 50 . 5 50000 0. 0. 55000 0000 0. 5 0000 HH 5 HH 5 0
9.0000 19.2500 4.8750 394000 102000 164000 564000
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
.500 .0 . . .0 .0 . 00.0 .0 . 0 . 0 0. 0 .
2.5000 1.8125 0.31 0.17 8.93 9.17 0.13 11.81 11.26 0.36 0.17
36.76
.500 .0 . . .0 50.0 . 00.0 .0 . 0 . 0 0. 0 .
2.5000 1.8125 0.31 0.50 8.93 9.84 0.13 11.81 11.26 0.36 0.17
35.91
.500 50. 00 . . .0 .0 . 00.0 5.0 . 0 . 0 0. 0 .5
2.5000 2.0000 0.31 0.17 8.93 9.17 0.13 11.81 11.22 0.36 0.17
38.74
. 5 . 5 .0 .0 5.0 .0 . .0 .0 .00 . 0 0 0 0. .
2.6250 1.8750 0.67 0.28 9.25 9.69 0.13 13.15 12.52 0.47 0.15
58.73
.0 . 5 . .5 5.0 0.0 . .0 .0 5. 0 .00 5 0. .
1.8125 1.3750 0.56 0.14 8.86 9.06 0.13 10.98 10.47 0.20 0.08
17.47
.0 . 5 . .0 .0 .0 . .0 .0 5. 0 .00 5 0. .5
1.8125 1.3750 0.56 0.35 8.94 9.57 0.13 10.98 10.47 0.20 0.08
16.56
.0 . 5 . .5 .0 .0 . .0 .0 5. 0 .00 5 0. .5
1.8125 1.3750 0.56 0.14 8.94 9.17 0.13 10.98 10.47 0.20 0.08
16.62
.0 . 5 . .5 .0 .0 . 0.0 .0 5. 0 .00 5 0. .
1.8125 1.3750 0.56 0.14 8.94 9.17 0.13 11.02 10.51 0.20 0.08
17.48
. 50 . 5 .0 .5 .0 .0 . .0 .0 . 0 . 0 0 0. 5 5.
1.2500 0.8750 0.51 0.14 8.90 9.13 0.13 10.87 10.71 0.16 0.11
11.87
. 50 . - . . .0 .0 .5 0.5 .0 . 0 . 0 0 0. 5 5. 5
2.7500 1.9375 -0.39 0.27 9.33 9.76 0.06 13.01 12.95 0.48 0.13
55.66
. .500 - . .5 .0 .0 . .5 .0 . 0 . 0 50 0. 50 0.
3.1249 2.5000 -0.24 0.06 9.29 9.29 0.13 13.16 12.87 0.38 0.10
68.06
. .500 - . .5 .0 .0 . .5 .0 . 0 . 0 50 0. 50 . 0
3.1249 2.5000 -0.24 0.06 9.29 9.29 0.13 13.16 12.95 0.38 0.10
71.21
. 50 . 5 .0 .5 .0 5.0 . .0 .0 . 0 . 0 0 0. 5 5.0
1.2500 0.8750 0.51 0.14 9.02 9.25 0.13 10.87 10.71 0.16 0.11
11.10
. 5 . - . .5 5.0 5.0 . 00.0 .0 . 0 0. 0 0 0 0. .
2.6250 1.9375 -0.18 0.06 9.25 9.25 0.13 11.81 11.54 0.13 0.01
32.83
. . - . . 5.0 5.0 . 00.0 .0 5.00 . 0 50 0. 0 .5
2.4375 1.9375 -0.18 0.25 9.25 9.65 0.13 11.81 11.54 0.20 0.10
31.99
.0 . 5 .0 .5 5.0 .0 . .0 5.0 . 0 . 0 0. .0
1.8125 1.3750 0.67 0.14 9.25 9.49 0.13 11.34 10.83 0.21 0.08
17.69
. 50 . - . . .0 55.0 .5 0.5 .0 . 0 . 0 0 0. 5 .
2.7500 1.9375 -0.39 0.27 9.61 10.04 0.06 13.01 12.95 0.48 0.13
51.67
. .500 - . .5 5 .0 5 .0 . .0 0.0 . 0 .50 50 0. 5 .
3.4375 2.5000 -0.19 0.06 9.88 9.88 0.13 14.34 14.17 0.58 0.06
96.54
5. 5 . . . .0 .0 . .5 5.0 . 0 .50 . 0. . 0
3.3750 1.9375 1.63 0.25 10.51 10.79 0.25 15.64 14.76 0.77 0.45 107.36
5. 5 . . . .0 .0 . .5 5.0 . 0 .50 . 0. . 0
3.3750 1.9375 1.63 0.25 10.51 10.79 0.25 15.64 14.76 0.77 0.45 107.36
. . . . .0 5 .0 . 0 .0 .0 . 0 . 0 00 0. 5 0.
1.9375 1.3125 0.56 0.25 9.53 9.96 0.13 12.17 11.77 0.44 0.10
24.12
. . 5 . . .0 5 .0 . 0 .0 0 .0 . 0 . 0 00 0. 5 .0
1.9375 1.3750 0.56 0.25 9.53 9.96 0.13 12.17 11.89 0.44 0.10
26.49
. 5 . 5 .0 .0 .0 0.0 . .0 .0 .00 . 0 0 0 0. .
2.6250 1.8750 0.67 0.28 9.80 10.24 0.13 13.15 12.52 0.47 0.15
51.17
. 50 . - . . .0 5 .0 .5 0.5 .0 . 0 . 0 0 0. 5 .
2.7500 1.9375 -0.39 0.27 9.72 10.12 0.06 13.01 12.95 0.48 0.13
50.31
. 50 50. 00 . . .0 5 .0 . .0 .0 . 0 . 0 0 0. 5 5.
2.7500 2.0000 0.27 0.25 9.76 10.16 0.25 13.34 12.76 0.24 0.17
55.63
. 5 . 5 - . .5 5 .0 5 .0 . .0 5.0 .00 .00 0 0. 5 .
2.8125 2.1250 -0.27 0.14 9.88 10.08 0.13 13.50 13.19 0.32 0.12
58.94
. .500 - . 0.5 5 .0 .0 . .0 0.0 . 0 .50 50 0. 5 .
3.4375 2.5000 -0.19 0.41 9.96 10.67 0.13 14.34 14.17 0.58 0.06
94.16
. 5 .0 5 . . 0.0 .0 . 5 .0 .0 .50 . 0 00 .5 0. .
4.3750 2.8750 1.57 0.25 11.02 11.69 0.25 17.95 16.38 0.85 0.46 208.84
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 00 50 .000 . 5 0000 0. 0. 000 5 000 0. 00000
EE 00 0 0 00
LL 5 LL 5 0
M M 0
LM LM 0
LM5 5 A LM5 5 0
LM5 5 E LM5 5 0
5
5
5 0
M 5 0 M 5 0
H 5 H 5 0
H 5 H 5 0
LM5 5 LM5 5 0
M M 0
M M 0
M M 0
EE 0 5 5
EE 0 50 00
EE 0 5 0
EE 0 50
EE 0 50 50
EE 50 5 5 5
EE 50 5 5 55
EE 50 5 5 0
EE 0 5 5
EE 5 50 5
EE 00 5 0 00
9.0000 20.0000 4.6250 322000 83500 134000 473000
. 5 . .500 5000 0. . 0 5 00 0000 . 000
B
Caption:
9.1250 10.5625 0.8858 30400 7890 4490 78500
. 5 .550 5.0 000 0. . 0 00000 000 . 5 0000
9.1250 13.2500 2.5625 174000 45100 25700 352000
. 50 . 50 .0 000 0. . 000 00 . 000
9.2500 12.2500 1.8125 97200 25200 15600 208000
. 50 . 5 . 50 000 0. 0 .5 000 00 . 0 0000
9.2500 12.3750 1.9375 114000 29700 20200 233000
. 50 . 5 . 000 0. 0 .5 000 00 . 000
Caption:
9.2500 12.3750 1.9375 108000 27900 19000 213000
. 50 0. 5 50. 00 000 0. . 000 00 . 0 000
9.2500 12.6250 2.0000 97000 25100 21000 185000
. 50 .0 5 5 . 000 0. . 000 00 . 0 000
9.2500 12.8750 2.0625 97000 25100 21000 185000
. 50 55. 00 . 0 000 0.5 .0 000 000 0. 0000
T
C
9.2500 14.0000 2.6875 158000 41000 41400 319000
. 50 .000 . 000 0. . 0 55000 5000 . 0 0000
9.2500 15.0000 2.9375 221000 57200 32600 455000
. 50 . 5 . 0000 0. . 0 50000 5 000 . 0000
D
9.2500 15.1250 4.4375 390000 101000 57600 757000
. 50 . 5 . 0000 0. . 0 000 000 . 0000
B
d
9.2500 15.1250 4.4375 369000 95700 54500 699000
5.0 . 5 . 000 0. 0 .5 000 00 . 000
9.2550 12.3750 1.9375 108000 27900 19000 213000
.5 0. 5 . 50 000 0. . 000 00 . 0 000
a
9.3125 12.6250 1.7500 97000 25100 21000 185000
. 0 .550 5.0 000 0. . 0 000 0 000 . 0000
9.3437 13.2500 2.5625 162000 42100 24000 319000
. 0 .550 5.0 000 0. . 0 00000 000 . 5 0000
9.3437 13.2500 2.5625 174000 45100 25700 352000
. 0 5 . 5 . 000 0. . 0 000 000 . 50000
9.3437 14.1250 2.8125 202000 52200 29700 416000
. 00 . 5 . 50 000 0. 5 . 0 000 0 000 . 5 50000
9.5000 13.7460 2.2500 146000 37700 22800 282000
. 00 55. 00 50. 00 5 000 0. . 5 000 500 . 0 0000
9.5000 14.0000 2.0000 123000 32000 19900 231000
. 00 55. 00 5 . 50 000 0. 5 . 0 000 0 000 . 5 50000
9.5000 14.0000 2.2500 146000 37700 22800 282000
. 00 5.0 50. 00 5 000 0. . 5 000 500 . 0 0000
9.5000 14.3720 2.0000 123000 32000 19900 231000
. 00 . 00 50. 00 5 000 0. . 5 000 500 . 0 0000
9.5000 14.5000 2.0000 123000 32000 19900 231000
. 00 . 00 . 000 0. . 5 5000 000 . 0 5 0000
9.5000 14.5000 2.6875 186000 48200 28400 345000
. 00 . 00 . 5000 0. 0 . 000 5 000 . 5 00000
9.5000 15.5000 2.9062 195000 50400 34700 359000
. 00 0 . 00 . 50 5000 0. 0 . 000 5 000 . 5 00000
9.5000 16.0000 2.7500 195000 50400 34700 359000
. 00 .500 0 . 00 5 0000 0. . 0 000 000 . 0000
9.5000 17.5000 4.0000 350000 90700 52400 544000
. 00 . 50 0. 50 0 0000 0. . 5 000 000 . 0000
9.5000 19.2500 4.7500 465000 121000 64600 744000
. 00 50 .000 . 5 0000 0. 0. 000 5 000 0. 00000
9.5000 20.0000 4.6250 322000 83500 134000 473000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
5. 50 .0 5 .5 . .0 .0 . 5 .0 .0 .50 . 0 0 0 0. 0 .
3.7500 2.8750 1.95 0.25 10.91 11.30 0.25 17.96 16.65 0.88 0.76 209.02
.500 .500 5. .0 .0 .0 .0 .0 5 .0 0. 0 . 0 5 0. .
0.8465 0.7283 0.62 0.08 9.33 9.49 0.08 10.35 10.20 0.01 0.09
4.09
5.0 50. 00 - . . .0 5 .0 . .0 .0 5. 0 . 0 50 0. .
2.5625 2.0000 -0.19 0.25 9.80 10.16 0.13 12.68 12.32 0.20 0.13
40.59
.0 . . .5 .0 5 .0 . 0 .0 .0 5.50 . 0 0 0 0. .
1.8125 1.3125 0.26 0.14 9.69 9.92 0.13 11.85 11.57 0.22 0.06
19.14
. .5 . . .0 5 .0 . 0 .0 .0 .50 . 0 0. .
1.9375 1.4375 0.33 0.25 9.69 10.16 0.13 12.05 11.65 0.18 0.11
21.74
5 . 5 .5 . .5 .0 5 .0 . 0 .0 .0 . 0 0.00 0. 0.
2.1250 1.4375 0.33 0.14 9.72 9.92 0.13 12.05 11.65 0.17 0.00
22.42
. . . . .0 5 .0 . 0 .0 .0 . 0 . 0 00 0. 5 0.05
1.9375 1.3125 0.56 0.25 9.69 10.16 0.13 12.17 11.77 0.44 0.10
22.15
. . 5 . . .0 5 .0 . 0 .0 0 .0 . 0 . 0 00 0. 5 .
1.9375 1.3750 0.56 0.25 9.69 10.16 0.13 12.17 11.89 0.44 0.10
24.52
. 5 . 5 .0 .0 5 .0 5.0 . .0 .0 .00 . 0 0 0 0. .00
2.6250 1.8750 0.67 0.28 10.00 10.43 0.13 13.15 12.52 0.47 0.15
48.50
. 5 . 50 - . . .0 .0 . .5 5 .0 . 0 .50 0 0. 5 .
2.9375 2.2500 -0.26 0.25 10.28 10.67 0.13 14.32 14.02 0.33 0.14
73.60
. 0. - . . 5 .0 .0 . .0 .0 . 0 . 0 0 0 5 0. .
4.4375 3.5625 -1.10 0.25 10.20 10.59 0.25 14.26 13.62 0.34 0.17 108.42
. 0. - . . 5 .0 .0 . .0 .0 0. 0 . 0 0 0. . 5
4.4375 3.5625 -1.10 0.25 10.20 10.59 0.25 14.26 13.62 0.40 0.11 109.45
5 . 5 .5 . .5 .0 5 .0 . 0 .0 .0 . 0 0.00 0. 0.
2.1250 1.4375 0.33 0.14 9.72 9.92 0.13 12.05 11.65 0.17 0.00
22.34
. 50 . 0. .5 .0 5 .0 . 0 .0 .0 . 0 . 0 00 0. 5 .
1.7500 1.3125 0.81 0.14 9.72 10.00 0.13 12.17 11.77 0.19 0.04
20.56
. 50 50. 00 - . . 5 .0 .0 . .0 .0 . 0 . 0 0 0. 0 .
2.7500 2.0000 -0.19 0.25 9.96 10.35 0.13 12.68 12.32 0.17 0.05
39.21
5.0 50. 00 - . . 5 .0 .0 . .0 .0 5. 0 . 0 50 0. .
2.5625 2.0000 -0.19 0.25 9.96 10.31 0.13 12.68 12.32 0.20 0.13
38.29
. 5 . 5 - . . 5 .0 .0 . .0 5.0 .00 .00 0 0. 5 .
2.8125 2.1250 -0.27 0.25 10.16 10.51 0.13 13.50 13.19 0.32 0.12
54.82
5 . 50 . 50 .5 . 5 .0 .0 . .0 5.0 .50 . 0 0 0. .5
2.2500 1.7500 0.10 0.25 10.12 10.51 0.13 12.95 12.80 0.25 0.06
36.44
50. 00 . 5. . 0.0 .0 . .0 .0 . 0 . 0 0 0 0. 5 5.
2.0000 1.3125 0.23 0.25 10.24 10.59 0.13 13.27 13.15 0.34 0.13
33.98
5 . 50 . 50 .5 . 5 .0 .0 . .0 .0 .50 . 0 0 0. .
2.2500 1.7500 0.10 0.25 10.12 10.51 0.13 12.95 12.87 0.25 0.06
39.18
50. 00 . 5. . 0.0 .0 . .0 .0 . 0 . 0 0 0 0. 5 . 0
2.0000 1.3125 0.23 0.25 10.24 10.59 0.13 13.27 13.31 0.34 0.13
37.05
50. 00 . 5. . 0.0 .0 . .0 0.0 . 0 . 0 0 0 0. 5 .
2.0000 1.3125 0.23 0.25 10.24 10.59 0.13 13.27 13.39 0.34 0.13
38.12
. 5 . 5 - . . 5 .0 .0 . .0 .0 . 0 0. 0 0 0. . 0
2.6875 2.1250 -0.09 0.25 10.12 10.59 0.13 13.54 13.43 0.30 0.00
53.35
. 50 50.005 .5 . .0 .0 . .0 .0 . 0 . 0 50 0 0. 555 .
2.7500 1.9687 0.10 0.25 10.55 10.94 0.25 14.89 14.41 0.57 0.13
70.19
. 50 .0 .5 . .0 .0 . .0 .0 . 0 . 0 50 0 0. 555 . 5
2.7500 1.8125 0.10 0.25 10.55 10.94 0.25 14.89 14.69 0.57 0.13
74.84
00.0 . 00 - . . .0 .0 . 0 .0 0 .0 . 0 . 0 0 0. 5 .00
3.9375 3.0000 -0.76 0.25 10.55 10.91 0.19 16.02 15.87 0.48 0.08 136.69
0. 50 .0 5 - .0 . .0 5.0 . 50.5 .0 . 0 .00 50 0. .
4.7500 3.6250 -1.22 0.25 10.87 11.22 0.25 17.74 17.48 0.73 0.16 216.91
5. 50 .0 5 .5 . .0 .0 . 5 .0 .0 .50 . 0 0 0 0. 0 .
3.7500 2.8750 1.95 0.25 11.34 11.69 0.25 17.96 16.65 0.88 0.74 201.31
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 5 .000 . 5 000 0.5 . 000 0 000 . 0000 EE 0 50
9.6250 15.0000 3.1250 200000 51800 45800 381000
. 50 0 . 00 . 5 000 0. . 5 00 000 . 0 000 0 0
9.7500 12.0000 0.8750 32700 8490 4720 83900
. 50 .0 5 .500 000 0. . 5 0 000 0000 . 0 0000 M M 0
9.7500 13.6250 2.5000 177000 45900 27000 365000
. 50 55. 00 50. 00 5 000 0. . 5 000 500 . 0 0000 EE 0 5 00
9.7500 14.0000 2.0000 123000 32000 19900 231000
. 50 5.0 50. 00 5 000 0. . 5 000 500 . 0 0000 EE 0 5
9.7500 14.3720 2.0000 123000 32000 19900 231000
. 50 . 00 50. 00 5 000 0. . 5 000 500 . 0 0000 EE 0 5 50
9.7500 14.5000 2.0000 123000 32000 19900 231000
. 50 .000 . 000 0. . 0 55000 5000 . 0 0000 M 5 M 5 0
9.7500 15.0000 2.9375 221000 57200 32600 455000
. 50 0 . 00 5. 0000 0. . 0 000 000 . 0000 HH HH 0
9.7500 16.0000 4.5625 433000 112000 63900 846000
. 50 .000 . 5 000 0.5 . 000 0 000 . 0000 EE 0 50
9.8130 15.0000 3.1250 200000 51800 45800 381000
5 .000 . 50 . 5 000 0. 5 . 00 00 . 000 5 0
10.0000 12.7500 0.8750 33300 8630 5120 87800
5 .000 5 . 5 . 000 0. . 0 000 000 . 50000 M M 0
10.0000 14.1250 2.8125 202000 52200 29700 416000
5 .000 5 . 5 . 000 0. . 0 000 000 . 50000 M X M 0
10.0000 14.1250 2.8125 202000 52200 29700 416000
5 .000 5. 5 5 . 000 0. . 0 000 000 .5 0000 EE 00
10.0000 14.3750 2.3125 150000 38800 24900 299000
5 .000 . 00 5 . 000 0. . 0 000 000 .5 0000 EE 00 5
10.0000 14.5000 2.3125 150000 38800 24900 299000
5 .000 . 00 . 5000 0. 0 . 000 5 000 . 5 00000 EE 5 00 5 55
10.0000 15.5000 2.9062 195000 50400 34700 359000
5 .000 00.050 5 . 50 000 0. . 0 000 5000 . 0000 EE 5 00 5 5 5
10.0000 15.7500 2.2500 176000 45600 25900 313000
5 .000 0 . 00 . 50 5000 0. 0 . 000 5 000 . 5 00000 EE 5 00 5 0
10.0000 16.0000 2.7500 195000 50400 34700 359000
5 .000 . 5 . 0000 0. . 0 000 000 . 0 0000 HM 5 HM 5 0
10.0000 16.6250 3.3906 288000 74700 42500 455000
5 .000 . 5 . 0000 0. . 0 000 5000 . 0000 HM 5 HM 5 0
10.0000 16.6250 3.3906 297000 77000 43900 475000
5 .000 5 . 00 . 50 00000 0. 0. 5 000 000 0. 0 0000 HH 5 HH 5 0
10.0000 21.0000 5.2500 471000 122000 196000 694000
5 . 5 . 00 5 . 50 000 0. 5 . 000 0 000 . 0000 M 5 A M 5 0
10.1250 13.5000 2.2500 150000 38900 23100 321000
5 . 5 . 00 5 . 50 000 0. 5 . 000 0 000 . 0000 M 5 M 5 0
10.1250 13.5000 2.2500 150000 38900 23100 321000
0. 50 5. 5 5 . 000 0. . 0 000 000 .5 0000 EE 0
10.2500 14.3750 2.3125 150000 38800 24900 299000
0. 50 . 00 5 . 000 0. . 0 000 000 .5 0000 EE 0 5
10.2500 14.5000 2.3125 150000 38800 24900 299000
0. 50 00.050 . 50 000 0. .5 0000 000 . 50000 EE 0 5 5
10.2500 15.7500 2.7500 182000 47300 31900 326000
0. 50 . 00 5. 5 00000 0. 0 0. 000 000 0. 0 0000 EE 5 0 5 5
10.2500 16.5000 3.3750 248000 64200 66500 451000
0. 50 . 5 . 0000 0. . 0 000 000 . 0 0000 HM 5 HM 5 0
10.2500 16.6250 3.3906 288000 74700 42500 455000
0. 50 . 5 . 0000 0. . 0 000 5000 . 0000 HM 5 HM 5 0
10.2500 16.6250 3.3906 297000 77000 43900 475000
B
Caption:
Caption:
C
D
B
d
a
B 0 TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 00 5 . 50 . . .0 5.0 . 5 .0 .0 . 0 .00 0 0. 0 0. 0
3.0000 2.2500 0.38 0.25 10.47 10.83 0.19 14.09 13.50 0.52 0.08
66.80
. 5 5. 5 . .5 5 .0 5 .0 .5 .0 .0 . 0 . 0 0 5 0. .
0.8750 0.6250 0.68 0.06 10.08 10.16 0.06 11.57 11.46 0.06 0.07
7.01
.500 50. 00 - . . .0 .0 . .0 .0 .00 . 0 50 0. .5
2.5000 2.0000 -0.05 0.25 10.35 10.75 0.25 13.07 12.64 0.16 0.14
38.60
50. 00 . 5. . .0 .0 . .0 .0 . 0 . 0 0 0 0. 5 .
2.0000 1.3125 0.23 0.25 10.39 10.79 0.13 13.27 13.15 0.34 0.13
31.83
50. 00 . 5. . .0 .0 . .0 .0 . 0 . 0 0 0 0. 5 5.
2.0000 1.3125 0.23 0.25 10.39 10.79 0.13 13.27 13.31 0.34 0.13
34.90
50. 00 . 5. . .0 .0 . .0 0.0 . 0 . 0 0 0 0. 5 .
2.0000 1.3125 0.23 0.25 10.39 10.79 0.13 13.27 13.39 0.34 0.13
35.98
. 5 . 50 - . . 0.0 0.0 . .5 5 .0 . 0 .50 0 0. 5 0.
2.9375 2.2500 -0.26 0.25 10.63 11.02 0.13 14.32 14.02 0.33 0.14
67.16
. 5 . - . . 5.0 .0 . .0 .0 .00 . 0 0 0. 5 .
4.6250 3.6875 -1.13 0.25 10.83 11.18 0.25 15.08 14.41 0.35 0.16 127.71
. 00 5 . 50 . . .0 .0 . 5 .0 .0 . 0 .00 0 0. 0 .
3.0000 2.2500 0.38 0.25 10.59 10.98 0.19 14.09 13.50 0.52 0.08
64.36
. 5 5. 5 . .5 .0 .0 .5 .0 0.0 . 0 . 0 0 5 0. 5 .
0.8750 0.6250 0.83 0.06 10.47 10.51 0.06 12.28 12.20 0.07 0.07
9.39
. 5 . 5 - . .5 0.0 .0 . .0 5.0 .00 .00 0 0. 5 . 5
2.8125 2.1250 -0.27 0.14 10.63 10.79 0.13 13.50 13.19 0.32 0.12
47.07
. 5 . 5 - . .5 0.0 .0 . .0 5.0 .00 .00 0 0. 5 . 5
2.8125 2.1250 -0.27 0.14 10.63 10.79 0.13 13.50 13.19 0.32 0.12
47.07
5 . . 5. . .0 .0 . .0 .0 . 0 . 0 0 0. .
2.3125 1.6875 0.20 0.25 10.71 11.06 0.25 13.66 13.35 0.32 0.07
39.93
5 . . 5. . .0 .0 . .0 0.0 . 0 . 0 0 0. .
2.3125 1.6875 0.20 0.25 10.71 11.06 0.25 13.66 13.39 0.32 0.07
41.28
. 50 50.005 .5 . .0 .0 . .0 .0 . 0 . 0 50 0 0. 555 .
2.7500 1.9687 0.10 0.25 10.91 11.30 0.25 14.89 14.41 0.57 0.13
64.23
55.5 . 5 . . .0 .0 .5 .0 .0 . 0 5. 0 0 0. .
2.1875 1.6250 0.13 0.13 10.71 10.94 0.06 14.53 14.61 0.25 0.21
54.85
. 50 .0 .5 . .0 .0 . .0 .0 . 0 . 0 50 0 0. 555 .
2.7500 1.8125 0.10 0.25 10.91 11.30 0.25 14.89 14.69 0.57 0.13
68.88
. . 5 - . . .0 .0 . .5 .0 .00 . 0 500 0. . 0
3.1406 2.6250 -0.37 0.27 11.06 11.30 0.13 15.73 15.43 0.51 0.19
91.71
. . 5 - . . .0 .0 . .5 .0 0.50 . 0 550 5 0. .
3.1406 2.6250 -0.37 0.27 11.06 11.30 0.13 15.73 15.43 0.41 0.24
92.06
0. 50 . 5.5 . 0 .5 .0 . 5.5 55.0 . 0 . 0 0 0 0. 0 0. 5
4.7500 3.0625 1.79 0.25 12.06 12.91 0.25 19.51 17.91 0.86 0.56 264.88
5 . 50 . 50 .5 0. .0 .0 . .0 .0 . 0 .00 0 0. 5 .
2.2500 1.7500 0.10 0.42 10.59 11.38 0.13 13.11 12.68 0.19 0.12
29.40
5 . 50 . 50 .5 . .0 .0 . .0 .0 . 0 .00 0 0. 5 .5
2.2500 1.7500 0.10 0.25 10.59 11.06 0.13 13.11 12.68 0.19 0.12
29.92
5 . . 5. . .0 .0 . .0 .0 . 0 . 0 0 0. .
2.3125 1.6875 0.20 0.25 10.87 11.26 0.25 13.66 13.35 0.32 0.07
37.32
5 . . 5. . .0 .0 . .0 0.0 . 0 . 0 0 0. .5
2.3125 1.6875 0.20 0.25 10.87 11.26 0.25 13.66 13.39 0.32 0.07
38.67
. 0 .0 0. . 0.0 .0 . .5 .0 . 0 5. 0 0 0 0. .
2.6563 1.8125 0.03 0.38 11.02 11.65 0.25 14.63 14.41 0.56 0.22
58.82
. . . . 5.0 5.0 . 5.0 .0 . 0 .00 0 0. . 5
3.3125 2.4375 0.78 0.25 11.22 11.61 0.13 15.56 14.80 0.55 0.08
92.26
. . 5 - . . 5.0 .0 . .5 .0 .00 . 0 500 0. 0.
3.1406 2.6250 -0.37 0.27 11.22 11.50 0.13 15.73 15.43 0.51 0.19
88.54
. . 5 - . . 5.0 .0 . .5 .0 0.50 . 0 550 5 0. 0.
3.1406 2.6250 -0.37 0.27 11.22 11.50 0.13 15.73 15.43 0.41 0.24
88.53
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
0. 50 . 50 0. 50 0 0000 0. . 5 000 000 . 0000
EE 5 0 5
0 0
LM 5 5 LM 5 0
0
0 0
5 0
LM 5 A LM 5 0
LM 5 LM 5 0
EE 5 05 5 55
EE 5 05 5 0
H 5 H 5 0
M 5 M 5 0
EE 5 0 5 55
EE 5 0 5 0
L 5 0 L 5 0 0
LL 5 LL 5 0
EE 0 5
EE 5 0 5
LM 5 LM 5
EE 0
EE 0 0 0 5 5
EE 0 0 0 00
EE 0 0
EE 0
5 5 5 5
5 5 5 5
M 55 M 55 0
L555 L555 0
10.2500 19.2500 4.7500 465000 121000 64600 744000
.5 5 5. .5 5 000 0. . 5 00 5 00 . 0 55 000
B
Caption:
10.3750 12.8125 1.1250 48800 12700 7920 125000
.5 5 55. 00 5 . 50 000 0. . 000 0000 . 5 0000
10.3750 14.0000 2.2500 155000 40100 24700 339000
.5 0 5. .500 0000 0. . 5 00 000 . 0 5 000
10.4945 12.8125 1.1614 47100 12200 7650 118000
. 00 . 50 . 5 000 0. 5 . 00 00 . 000
10.5000 12.7500 0.8750 33300 8630 5120 87800
. 00 5. .5 5 000 0. . 5 00 5 00 . 0 55 000
Caption:
10.5000 12.8125 1.1250 48800 12700 7920 125000
. 00 55. 00 5 . 50 000 0. . 000 0000 . 5 0000
10.5000 14.0000 2.2500 155000 40100 24700 339000
. 00 55. 00 5 . 50 000 0. . 000 0000 . 5 0000
10.5000 14.0000 2.2500 155000 40100 24700 339000
. 00 . 00 . 5000 0. 0 . 000 5 000 . 5 00000
T
C
10.5000 15.5000 2.9062 195000 50400 34700 359000
. 00 0 . 00 . 50 5000 0. 0 . 000 5 000 . 5 00000
10.5000 16.0000 2.7500 195000 50400 34700 359000
. 00 .500 0. 50 0000 0.5 .0 000 5 000 .0 5 0000
D
10.5000 17.5000 4.7500 402000 104000 103000 791000
. 5 .000 . 000 0. . 0 55000 5000 . 0 0000
B
d
10.6250 15.0000 2.9375 221000 57200 32600 455000
.050 . 00 . 5000 0. 0 . 000 5 000 . 5 00000
10.7500 15.5000 2.9062 195000 50400 34700 359000
.050 0 . 00 . 50 5000 0. 0 . 000 5 000 . 5 00000
a
10.7500 16.0000 2.7500 195000 50400 34700 359000
. 5 5 . 5 .5 000 0.5 . 00 000 .0 50000
10.8750 13.8750 1.4375 73400 19000 17500 169000
. 00 .500 . 5 000 0. 5 . 00 00 . 000
11.0000 12.5000 0.9600 35800 9270 5500 105000
. 00 . 00 5. 50 0000 0. .5 5 000 000 .55 50000
11.0000 18.5000 3.7500 310000 80300 52000 527000
. 00 . 50 0. 50 0 0000 0. . 5 000 000 . 0000
11.0000 19.2500 4.7500 465000 121000 64600 744000
. 0.00 5.0 0 000 0. . 000 000 . 5 0000
11.0229 14.9610 2.5625 159000 41300 30500 387000
0.000 0 . 00 . 50 5 000 0. .55 000 000 .5 0000
11.0236 16.0000 2.7500 191000 49600 32800 374000
0. 00.050 5 . 5 0000 0. . 5 000 0 000 . 0000
11.0312 15.7500 2.0625 133000 34400 24000 266000
0. 0 . 00 5 . 5 0000 0. . 5 000 0 000 . 0000
11.0312 16.0000 2.0625 133000 34400 24000 266000
0. 0 . 00 . 50 0 000 0. .55 5000 55000 .5 0000
11.0312 16.0000 2.7500 204000 52800 34900 409000
0. 0 . 00 . 50 5 000 0. .55 000 000 .5 0000
11.0312 16.0000 2.7500 191000 49600 32800 374000
5. 50 5 .0 . 5 000 0. . 5500 55 00 . 5 000
11.2500 13.9375 1.3125 56800 14700 12400 134000
5. 50 5 . 5 . 5 000 0. . 5500 55 00 . 5 000
11.2500 14.1250 1.3125 56800 14700 12400 134000
. 5 0 . 00 . 0000 0. . 0 000 5000 . 5 0000
11.3750 16.0000 3.0625 262000 68000 39300 567000
. 00 . 50 . 5 5 0000 0. 0 . 000 0 00 . 5 50000
11.5000 14.7500 1.8750 115000 29700 20400 258000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
0. 50 .0 5 - .0 . 0.0 .0 . 50.5 .0 . 0 .00 50 0. . 0
4.7500 3.6250 -1.22 0.25 11.42 11.77 0.25 17.74 17.48 0.73 0.16 201.28
.5 5 5. 00 0. .5 5.0 5.0 .5 5.0 .0 . 0 . 0 0 0 0. 5. 5
1.1250 1.0000 0.80 0.06 10.83 10.83 0.06 12.40 12.28 0.05 0.05
11.35
5 . 50 . 50 5. .5 .0 .0 . .0 5.0 5. 0 . 0 550 0. 5 5.
2.2500 1.7500 0.20 0.14 10.98 11.14 0.13 13.50 13.19 0.23 0.13
34.02
. 0 5. 00 . .5 5.0 .0 .5 5.0 .0 0.50 -0. 0 0 0. 5 5. 5
1.3177 1.0000 0.77 0.06 10.83 10.91 0.06 12.40 12.28 0.02 -0.03
11.79
. 5 5. 5 . .5 5.0 .0 .5 .0 0.0 . 0 . 0 0 5 0. 5 .
0.8750 0.6250 0.83 0.06 10.83 10.91 0.06 12.28 12.20 0.07 0.07
7.40
.5 5 5. 00 0. .5 .0 .0 .5 5.0 .0 . 0 . 0 0 0 0. . 5
1.1250 1.0000 0.80 0.06 10.91 10.91 0.06 12.40 12.28 0.05 0.05
10.70
5 . 50 . 50 5. 0.5 .0 .0 . .0 5.0 5. 0 . 0 550 0. 5 .5
2.2500 1.7500 0.20 0.41 11.06 11.77 0.13 13.50 13.19 0.23 0.13
32.00
5 . 50 . 50 5. .5 .0 5.0 . .0 5.0 5. 0 . 0 550 0. 5 .
2.2500 1.7500 0.20 0.14 11.06 11.22 0.13 13.50 13.19 0.23 0.13
32.72
. 50 50.005 .5 . .0 .0 . .0 .0 . 0 . 0 50 0 0. 555 .
2.7500 1.9687 0.10 0.25 11.30 11.65 0.25 14.89 14.41 0.57 0.13
57.96
. 50 .0 .5 . .0 .0 . .0 .0 . 0 . 0 50 0 0. 555 . 0
2.7500 1.8125 0.10 0.25 11.30 11.65 0.25 14.89 14.69 0.57 0.13
62.61
. 5 . 00 -0.5 . .0 5.0 . .5 0.0 . 0 . 0 50 0. 0 0 .
4.6250 3.5000 -0.02 0.25 11.69 12.40 0.25 16.63 15.35 0.76 0.16 159.43
. 5 . 50 - . . .0 .0 . .5 5 .0 . 0 .50 0 0. 5 5.
2.9375 2.2500 -0.26 0.25 11.30 11.65 0.13 14.32 14.02 0.33 0.14
55.74
. 50 50.005 .5 . .0 0 .0 . .0 .0 . 0 . 0 50 0 0. 555 .
2.7500 1.9687 0.10 0.25 11.46 11.85 0.25 14.89 14.41 0.57 0.13
54.71
. 50 .0 .5 . .0 0 .0 . .0 .0 . 0 . 0 50 0 0. 555 .
2.7500 1.8125 0.10 0.25 11.46 11.85 0.25 14.89 14.69 0.57 0.13
59.36
. 5 . 5. .5 .0 .0 . .0 .0 .00 . 0 0 0 50 0. 5 .
1.3750 0.9375 1.38 0.14 11.34 11.54 0.13 13.46 13.07 0.24 0.14
16.91
. . 0. .5 .0 .0 .5 .0 0 .0 . 0 . 0 0 0 0. .5
0.9600 0.7200 0.80 0.06 11.26 11.34 0.06 12.28 12.17 0.07 0.08
5.69
. . 50 - . . .0 .0 . .0 0.0 . 0 0. 0 0 0. 5 .
3.6875 2.7500 -0.30 0.38 12.36 12.64 0.13 17.04 16.93 0.66 0.02 129.95
0. 50 .0 5 - .0 . 0 .0 0 .0 . 50.5 .0 . 0 .00 50 0. .
4.7500 3.6250 -1.22 0.05 11.97 11.93 0.25 17.74 17.48 0.73 0.16 184.76
5.0 . . .5 .0 0 .0 . .0 5 .0 . 0 0. 0 0 5 0. 0.
2.5625 1.9375 0.45 0.14 11.73 11.89 0.13 14.49 14.02 0.31 0.03
45.51
. 5 . 5 . . 0 .0 0 .0 . .0 .0 . 0 0. 0 0 0 0. 5 .0
2.6643 2.1250 0.26 0.25 12.09 12.13 0.13 15.12 14.88 0.32 0.04
59.58
50. . 5 5. . 0 .0 0 .0 . .0 .0 . 0 5. 0 0 0. 5 .
1.9768 1.3750 0.62 0.27 12.09 12.17 0.13 14.80 14.72 0.30 0.21
41.31
50. . 5 5. . 0 .0 0 .0 . .0 .0 . 0 5. 0 0 0. 5 .
1.9768 1.3750 0.62 0.27 12.09 12.17 0.13 14.80 14.84 0.30 0.21
43.72
. 5 . 5 . . 0 .0 0 .0 . .0 .0 . 0 .50 0 55 0. .
2.6643 2.1250 0.26 0.27 12.09 12.17 0.13 15.12 14.88 0.27 0.06
59.09
. 5 . 5 . . 0 .0 0 .0 . .0 .0 . 0 0. 0 0 0 0. 5 .
2.6643 2.1250 0.26 0.27 12.09 12.17 0.13 15.12 14.88 0.32 0.04
59.43
. 50 . 5 . .5 .0 0 .0 . 5.0 .0 5. 0 . 0 0 0 0. .
1.2500 0.8750 1.29 0.14 11.73 11.89 0.13 13.58 13.31 0.22 0.11
13.84
. 50 . 5 . .5 .0 0 .0 . 5.0 0.0 5. 0 . 0 0 0 0. .
1.2500 0.8750 1.29 0.14 11.73 11.89 0.13 13.58 13.39 0.22 0.11
14.86
. 0. 5 - . . 0.0 .0 . .0 .0 5. 0 . 0 00 0. . 0
3.0625 2.3750 -0.16 0.25 12.20 12.44 0.13 15.27 14.92 0.23 0.16
64.81
. 5 . 5 .5 .5 05.0 0 .0 . .0 55.0 5.50 . 0 0 0 0. 55 .
1.8750 1.3750 0.69 0.14 12.01 12.17 0.13 14.25 13.98 0.22 0.09
25.97
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 00 . 00 .500 000 0. 0. 000 000 0. 000 5 55
11.5000 15.5000 2.5000 105000 27300 28500 224000
. 00 . 00 5. 50 0000 0. .5 5 000 000 .55 50000 EE 5 5
11.5000 18.5000 3.7500 310000 80300 52000 527000
. 00 55 . 00 .5 5 0000 0. 0 .5 5000 000 . 00000 EE 0 0
11.5000 22.0000 5.3750 594000 154000 104000 923000
. 50 .500 .500 5 000 0. .5 000 000 .55 0000 EE 5 50
11.7500 17.5000 2.5000 170000 44200 28600 312000
. 5 5. 00 . 0000 0. . 0 000 5000 . 5 50000 HH 5 HH 5 0
11.8100 19.5000 5.5625 632000 164000 93300 1270000
00.0 . 5 .550 0000 0. . 0000 0000 . 0000 HM 5 HM 5 0
11.8125 16.6250 3.2500 286000 74100 42700 622000
0 . 00 . 00 50. 00 5 5000 0. . 000 00 . 0000 L 5 0 L 5 0 0
12.0000 15.5000 2.0000 129000 33500 20600 295000
0 . 00 0 . 00 .500 5 000 0. . 000 000 . 0000 LM 5 0 AA LM 5 0 0
12.0000 16.0000 2.5000 170000 44000 33200 392000
0 . 00 0 . 00 .500 5 000 0. . 000 000 . 0000 LM 5 0 LM 5 0 0
12.0000 16.0000 2.5000 170000 44000 33200 392000
0 . 00 .0 . 00 000 0. . 000 000 . 0 0000 EE 0X
12.0000 17.2460 3.0000 198000 51200 36500 401000
0 . 00 .500 .500 5 000 0. .5 000 000 .55 0000 EE 0
12.0000 17.5000 2.5000 170000 44200 28600 312000
0 . 00 .500 .500 5 000 0. .5 000 000 .55 0000 EE 0 50
12.0000 17.5000 2.5000 170000 44200 28600 312000
0 . 00 5. 00 . 00 0000 0. 0 . 000 000 . 5 0 0000 EE 05 50
12.0000 19.5000 3.0000 298000 77200 53100 471000
0 . 00 5. 00 5. 50 0000 0. 0 . 000 5 000 . 5 550000 EE 0 5
12.0000 19.5000 3.7500 324000 84000 57800 573000
0 . 00 . 0 . 00 0000 . 0.5 000 5 000 0.50 0000 M 5 M 5 0
12.0000 19.6830 4.0000 257000 66600 134000 424000
0 . 00 55 . 00 .5 5 0000 0. 0 .5 5000 000 . 00000 EE 0 0 0
12.0000 22.0000 5.3750 594000 154000 104000 923000
. 5 . 5 . 5 000 0. 0. 000 00 0. 000 LL 5 0 LL 5 0 0
12.3125 14.1250 0.8750 29500 7640 10800 86100
. 5 5. 00 0. 50 0000 0.5 .0 000 000 .0 50000 H 5 0 H 5 0 0
12.3750 19.5000 4.7500 432000 112000 110000 889000
.500 .500 .500 5 000 0. .5 000 000 .55 0000 EE 50
12.5000 17.5000 2.5000 170000 44200 28600 312000
.500 .500 .500 5 000 0. .5 000 000 .55 0000 EE 50 50
12.5000 17.5000 2.5000 170000 44200 28600 312000
.500 . 5 5. 5 0000 0. . 000 000 . 0000 HM 5 0 HM 5 0 0
12.5000 17.6250 3.3750 297000 76900 44100 628000
.500 . 5 5. 5 0000 0. . 000 000 . 0000 HM 5 0 HM 5 0 0
12.5000 17.6250 3.3750 322000 83600 47900 706000
.500 5 . 00 .5 5 0000 0. . 000 5 0000 . 00000 EE 0 5 0
12.5000 23.5000 5.3750 636000 165000 119000 1030000
.500 . 00 . 00000 0. 0. 00000 0000 0. 0000 H H 0
12.5000 24.5000 5.8125 607000 157000 253000 927000
. 50 .000 .5 5 000 0. . 00 00 . 000 LL 5 LL 5 5
12.7500 15.0000 1.1250 53700 13900 10500 151000
5. 5 . 00 .5 5 0000 0. . 000 5 0000 . 00000 EE 0 0
12.8125 23.5000 5.3750 636000 165000 119000 1030000
0. 00 5. 5 . 5 5000 0.50 . 0 000 05000 . 0000 L 00 L 00 0
13.0000 16.3750 1.8750 107000 27700 23600 266000
0. 00 . 00 . 5 000 0. . 000 000 . 0 0000 EE 0 0 0 0
13.0000 19.0000 2.6250 197000 51200 36500 398000
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
50. 00 . 50 . .5 0 .0 .0 . .0 .0 . 0 . 0 0 0 0. 0 .0
2.0000 1.7500 1.44 0.14 12.17 12.32 0.25 14.88 14.29 0.55 0.11
39.75
. . 50 - . . .0 0.0 . .0 0.0 . 0 0. 0 0 0. 5 . 5
3.6875 2.7500 -0.30 0.38 12.76 12.99 0.13 17.04 16.93 0.66 0.02 120.70
.5 5 . 5 - . . .0 5.0 . 5 .0 50 .0 0.00 . 0 0 0 0. . 0
5.3750 3.8750 -0.96 0.25 12.95 13.19 0.25 20.24 19.72 0.79 0.29 291.88
. . . .0 0.0 .0 .5 5.0 .0 . 0 .00 5 0 5 0. 55 .
2.4375 1.5625 0.30 0.31 12.60 13.07 0.06 16.34 16.38 0.45 0.28
64.87
. . 00 - .5 . .0 .0 . .5 .0 0. 0 . 0 50 0 0. 0 0 .
5.5625 4.5000 -1.36 0.25 13.07 13.46 0.25 18.40 17.64 0.42 0.30 234.41
.550 .500 -5. . .0 .0 . 0 .5 .0 . 0 .50 550 0. .
3.2500 2.5000 -0.22 0.25 12.56 12.91 0.13 15.88 15.51 0.29 0.14
74.39
50. 00 . 00 . . .0 .0 . 0.0 .0 5. 0 . 0 50 0 0. 5 5 . 5
2.0000 1.5000 0.50 0.25 12.56 12.95 0.13 14.96 14.72 0.22 0.08
31.64
.500 . 5 . . .0 .0 . .0 0.0 . 0 .50 0 0 0. 5 .
2.5000 1.8750 0.64 0.50 12.68 13.54 0.13 15.47 14.96 0.27 0.10
47.09
.500 . 5 . . .0 .0 . .0 0.0 . 0 .50 0 0 0. 5 .
2.5000 1.8750 0.64 0.25 12.68 13.03 0.13 15.47 14.96 0.27 0.10
47.26
. 5 . 5 . . .0 .0 . .5 0 .0 5.00 - .00 0 0. .00
3.0312 2.1250 0.29 0.25 12.91 13.15 0.19 16.20 15.98 0.59 -0.08
72.75
. . . .0 .0 .0 . 5.0 5.0 . 0 .00 5 0 5 0. 55 .
2.4375 1.5625 0.30 0.31 12.76 13.27 0.13 16.34 16.34 0.45 0.28
61.55
. . . .0 .0 .0 .5 5.0 .0 . 0 .00 5 0 5 0. 55 .
2.4375 1.5625 0.30 0.31 12.76 13.27 0.06 16.34 16.38 0.45 0.28
61.65
. 5 . 5 . . .0 .0 . .0 5 .0 0. 0 5. 0 0 0. 5 .
2.9375 2.1250 0.36 0.25 12.95 13.35 0.13 18.22 18.07 0.40 0.23 106.57
.0 5 . 50 - .5 .0 0.0 5 .0 . 5 .0 50.0 . 0 . 0 0 0. .
3.6250 2.7500 -0.06 0.63 12.99 14.13 0.25 18.07 17.72 0.68 0.09 137.41
. 5 5 . 5 05. . .0 5 .0 . .0 .0 * * 5 0 5 0. .0
3.1250 2.1250 4.15 0.25 13.54 13.90 0.25 18.94 17.24 * *
138.93
.5 5 . 5 - . . 5.0 5.0 . 5 .0 50 .0 0.00 . 0 0 0 0. .
5.3750 3.8750 -0.96 0.05 13.19 13.19 0.25 20.24 19.72 0.79 0.29 278.25
0. . .5 . .0 5.0 .5 5 .0 .0 . 0 . 0 0 0 0. 0 .0
0.8125 0.5625 3.13 0.09 12.68 12.80 0.06 13.94 13.62 0.12 0.08
6.75
.0 . 00 . . .5 .0 . .0 .0 . 0 . 0 50 50 0. 5 .0
4.6875 3.5000 0.33 0.25 13.57 14.21 0.25 18.62 17.28 0.70 0.14 183.19
. . . .0 .0 .0 . 5.0 5.0 . 0 .00 5 0 5 0. 55 . 0
2.4375 1.5625 0.30 0.31 13.15 13.62 0.13 16.34 16.34 0.45 0.28
54.90
. . . .0 .0 .0 .5 5.0 .0 . 0 .00 5 0 5 0. 55 . 5
2.4375 1.5625 0.30 0.31 13.15 13.62 0.06 16.34 16.38 0.45 0.28
55.00
5. 5 . - . .5 .0 .0 . .5 .0 . 0 . 0 0 0. 0 0.55
3.3750 2.6875 -0.19 0.14 13.27 13.43 0.13 16.84 16.46 0.25 0.15
89.39
5. 5 . - . .5 .0 .0 . .5 .0 . 0 . 0 0 0 0. 0.
3.3750 2.6875 -0.19 0.14 13.27 13.43 0.13 16.84 16.46 0.27 0.15
88.76
.5 5 . 5 - . . 5 .0 0.0 . 5 .5 5 .0 0. 0 . 0 0 0. 05 5 .
5.3750 3.8750 -0.66 0.78 13.90 15.35 0.25 21.55 21.02 0.80 0.31 335.63
. .550 0.5 . .0 0.0 . 5 .5 5 .0 5. 0 . 0 500 0. 0 .
5.1875 3.2500 2.38 0.56 14.69 16.14 0.50 22.90 20.91 0.99 0.69 374.08
.5 5 0. 5. .5 .0 .0 . .0 5.0 . 0 .50 500 0. 00 5.
1.1250 0.8125 1.38 0.14 13.11 13.35 0.13 14.69 14.37 0.11 0.10
11.61
.5 5 . 5 - . . 5 .0 .0 . 5 .5 5 .0 0. 0 . 0 0 0. 05 .
5.3750 3.8750 -0.66 0.25 14.13 14.53 0.25 21.55 21.02 0.80 0.32 326.23
. 5 . 5 5. .5 5.0 .0 . 0 .0 .0 . 0 0. 0 0 0. .0
1.8750 1.3750 1.39 0.14 13.58 13.74 0.13 15.83 15.51 0.29 0.00
30.88
.500 . 50 . . 5 .0 .0 . 5 .0 .0 5.50 5. 0 0 0. 5.
2.5000 1.7500 0.64 0.27 13.94 14.33 0.27 17.96 17.68 0.61 0.23
78.83
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B 5
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
0. 00 . 00 5. 5 0000 0. .5 000 000 . 0000 EE5 0 5 0
13.0000 19.0000 3.3750 276000 71400 47800 523000
. 5 . 00 0. 5 0000 0. . 0 000 000 . 0000 HM 0 HM 0 0
13.1250 18.5000 3.5625 353000 91400 52400 777000
. 00 50. 50 . 5 5 000 0. 5 . 0 000 000 . 0000 LM LM 0
13.5000 17.7500 2.6250 214000 55600 33500 497000
. 00 5 .0 . 5 0 000 0. 0. 0 000 55000 0. 0000 LM 5 LM 5 0
13.5000 17.9960 2.6250 181000 47000 57400 436000
. 00 5 .0 . 0 000 0. 0. 0 000 55000 0. 0000 LM 5 LM 5
13.5000 17.9960 2.6875 181000 47000 57400 436000
.0 5 . 00 0. 5 5 000 0.50 . 0 000 000 . 0000 EE 50
13.6250 18.5000 2.3750 121000 31300 26800 250000
.0 5 . 00 0. 5 5 000 0.50 . 0 000 000 . 0000 EE 00
13.6250 19.0000 2.3750 121000 31300 26800 250000
.0 5 . 00 . 5 000 0. . 000 000 . 0 0000 EE 0 0 0
13.6250 19.0000 2.6250 197000 51200 36500 398000
.0 5 . 00 . 5 000 0. . 000 000 . 0 0000 EE 0 0 0
13.6250 19.0000 2.6250 197000 51200 36500 398000
.0 5 . 50 5. 50 5 0000 0. . 000 000 . 0000 HM HM 0
13.6250 19.2500 3.7500 358000 92900 53200 774000
.0 5 . 50 5. 50 0000 0. . 000 5 000 . 0000 HM HM 0
13.6250 19.2500 3.7500 381000 98700 56600 845000
. 50 50 . 50 0. 0000 0. . 000 000 .5 0000 EE
13.7500 19.7500 3.5625 298000 77200 48500 626000
5 .0 . 00 0. 5 5 000 0.50 . 0 000 000 . 0000 EE 50
13.9375 18.5000 2.3750 121000 31300 26800 250000
5 .0 . 00 0. 5 5 000 0.50 . 0 000 000 . 0000 EE 00
13.9375 19.0000 2.3750 121000 31300 26800 250000
55. 00 .500 0. 5 000 0. . 5 000 000 . 0 0000 L L 0
14.0000 17.5000 2.3750 162000 41900 22000 444000
55. 00 50 . 50 . 000 0. . 000 000 . 0000 EE 00 5
14.0000 19.7500 2.9375 202000 52400 39500 420000
55. 00 50 . 50 0. 0000 0. . 000 000 .5 0000 EE 0
14.0000 19.7500 3.5625 298000 77200 48500 626000
. 50 0 . 00 . 000 0. 0 . 50 00 00 . 5 5 000 LL5 LL5 0
14.2500 16.0000 0.9375 43600 11300 7780 129000
. 50 5 . 5 0 . 00 0000 0. . 0 50 000 000 . 0000 HM 50 HM 50 0
14.4980 20.6250 4.0000 437000 113000 64500 977000
. 5 50 . 50 . 000 0. . 000 000 . 0000 EE 5
14.6250 19.7500 2.9375 202000 52400 39500 420000
. 50 . 00 .5 5 000 0. . 0 500 00 . 5000 LL LL 0
14.7500 17.0000 1.1250 56000 14500 8260 167000
.000 . 5 . 5 000 0.50 . 5 000 000 . 0000 L 55 L 55
15.0000 18.8750 1.9375 131000 33900 28800 311000
.000 50 .000 .500 000 0.5 . 000 5 000 . 0 0000 EE 50 00
15.0000 20.0000 2.5000 145000 37600 34300 332000
.000 5 . 5. 5 0000 0. .5 5 000 000 .5 50000 LM5 5 LM5 5 0
15.0000 20.5625 3.3750 306000 79400 52400 663000
.000 5 . 00 0 . 5 0000 0. . 0 50 000 000 . 0000 HM HM 0
15.0000 21.5000 4.1250 436000 113000 64300 946000
.000 5 . 00 0 . 5 00000 0. . 0 5 5000 000 . 0000 HM HM 0
15.0000 21.5000 4.1250 473000 123000 69800 1060000
.000 5 0.550 . 00 0000 0. . 0 000 0000 . 5550000 M 0 M 0
15.0000 23.2500 4.5000 549000 142000 81000 1250000
. 5 . 5 .5 5 000 0. . 5 00 00 . 000 LL 5 LL 5 0
15.1250 17.3750 1.1250 51200 13300 7740 150000
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
0. 0. 5 . . 5 .0 0.0 . 5 .0 .0 .50 . 0 0 0. 0 . 5
3.1562 2.3750 0.19 0.25 13.82 14.17 0.13 17.87 17.68 0.57 0.12
99.10
0. . - . . 5 .0 .0 . .5 .0 . 0 . 0 0 0. 5 .5
3.5625 2.8125 -0.24 0.25 14.06 14.29 0.13 17.69 17.28 0.30 0.13 102.69
. 5 5 . . .5 0.0 .0 .5 5.0 5.0 . 0 . 0 0 0. . 0
2.6250 2.0625 0.35 0.33 14.17 14.69 0.14 17.13 16.73 0.19 0.19
58.19
.500 .0 5 . . .0 .0 . .0 .0 . 0 . 0 0 00 0. .0
2.5000 1.8125 2.22 0.13 14.29 14.45 0.13 17.44 16.65 0.50 0.19
61.77
.500 . 5 5 . . .0 .0 . .0 .0 . 0 . 0 0 00 0. .
2.5000 1.8750 2.22 0.13 14.29 14.45 0.13 17.44 16.65 0.50 0.19
62.80
55.5 . 00 . .0 .0 .0 . 55.0 5.0 . 0 . 0 0 0. 5. 5
2.1875 1.5000 1.33 0.28 14.49 14.92 0.25 17.91 17.52 0.57 0.15
55.44
55.5 . 00 . .0 .0 .0 . 55.0 5 .0 . 0 . 0 0 0. .
2.1875 1.5000 1.33 0.28 14.49 14.92 0.25 17.91 17.76 0.57 0.15
61.67
.500 . 50 . . .0 .0 . 5 .0 .0 5.50 5. 0 0 0. .5
2.5000 1.7500 0.64 0.27 14.41 14.80 0.27 17.96 17.68 0.61 0.23
69.58
.500 . 50 . . .0 .0 . 5 .0 .0 5.50 5. 0 0 0. .0
2.5000 1.7500 0.64 0.50 14.41 15.28 0.27 17.96 17.68 0.61 0.23
68.48
5. 50 . - . . .0 .0 . .0 5 .0 . 0 .00 0 0. 5 5 .00
3.7500 2.9375 -0.25 0.25 14.45 14.84 0.13 18.39 17.95 0.37 0.12 119.06
5. 50 . - . . .0 .0 . .0 5 .0 . 0 .50 50 0. 5 .
3.7500 2.9375 -0.25 0.25 14.45 14.84 0.13 18.39 17.95 0.34 0.14 117.74
. . 50 . . .0 .0 . .5 0.0 .00 .00 0 0 0. 5 .
3.3125 2.7500 0.14 0.25 14.65 15.04 0.13 18.83 18.50 0.47 0.12 116.15
55.5 . 00 . .0 .0 5.0 . 55.0 5.0 . 0 . 0 0 0. . 5
2.1875 1.5000 1.33 0.28 14.72 15.16 0.25 17.91 17.52 0.57 0.15
51.25
55.5 . 00 . .0 .0 5.0 . 55.0 5 .0 . 0 . 0 0 0. .0
2.1875 1.5000 1.33 0.28 14.72 15.16 0.25 17.91 17.76 0.57 0.15
57.48
0. 5 . 5 . .5 0.0 .0 . 0.0 .0 5. 0 . 0 0 0. 0.5
2.3750 1.8750 0.28 0.14 14.57 14.72 0.13 16.93 16.61 0.20 0.09
45.32
. 5 50. 00 . . .0 .0 . .0 .0 .00 5. 0 0 0. .0
2.6250 2.0000 0.77 0.25 14.92 15.28 0.13 18.94 18.58 0.75 0.23
86.07
. . 50 . . .0 .0 . .5 0.0 .00 .00 0 0 0. 50.
3.3125 2.7500 0.14 0.25 14.84 15.24 0.13 18.83 18.50 0.47 0.12 111.04
. . . . .0 .0 .5 0 .0 .0 . 0 . 0 0 0 0 0. 005 .
0.9375 0.6875 1.49 0.09 14.61 14.65 0.06 15.79 15.59 0.04 0.09
8.11
0 . 00 . 5 - . . .0 00.0 . .5 .0 . 0 . 0 00 0. 0 .0
4.0000 3.1250 -0.33 0.25 15.51 15.75 0.25 19.63 19.17 0.36 0.14 145.57
. 5 50. 00 . . 0.0 00.0 . .0 .0 .00 5. 0 0 0. .
2.6250 2.0000 0.77 0.25 15.35 15.75 0.13 18.94 18.58 0.75 0.23
75.63
.5 5 0. . .5 .0 .0 . .0 .0 . 0 . 0 0 050 0. 055 .0
1.1250 0.8125 1.10 0.14 15.12 15.31 0.13 16.69 16.42 0.08 0.12
13.40
. 5 . 5 . . 5.0 0 .0 . 5.0 5 .0 . 0 . 0 0 5 0. . 0
1.8750 1.3750 1.69 0.25 15.55 16.02 0.13 18.31 17.95 0.26 0.11
40.57
5 . . 00 . . 00.0 0.0 . .0 .0 .00 . 0 0 0. 5 . 0
2.3125 1.5000 1.55 0.25 15.75 16.14 0.13 18.98 18.82 0.71 0.15
64.81
. . . . 0 .0 .0 . .5 .0 . 0 . 0 0 0. 0 .
3.3125 2.4375 0.35 0.25 15.83 16.18 0.13 19.67 19.41 0.49 0.12 108.48
0 . 5 .550 - . . 05.0 5.0 . 5 0.0 50 .0 . 0 5. 0 0 0. .5
4.1250 3.2500 -0.28 0.25 15.94 16.34 0.25 20.47 19.96 0.36 0.21 168.68
0 . 5 .550 - . . 05.0 5.0 . 5 0.0 50 .0 . 0 . 0 0 0 0. .
4.1250 3.2500 -0.28 0.25 15.94 16.34 0.25 20.47 19.96 0.35 0.19 168.95
. 00 . 00 - . . 5.0 5.0 . 5 .5 5 .0 0. 0 .00 5 50 0. .
4.5000 3.5000 -0.37 0.25 16.34 16.73 0.25 22.14 21.61 0.42 0.24 251.73
.5 5 0. 0.0 .5 .0 .0 . .0 .0 .00 .00 0 0 0 0. 0 .
1.1250 0.8125 1.18 0.14 15.47 15.71 0.13 17.05 16.81 0.08 0.12
13.55
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS
SINGLE-ROW
T
d D T C e Y C 0 Ca 0 K C0 Inner Outer
. 5 5 . 00 0 . 5 0000 0. . 0 50 000 000 . 0000 HM HM 0
15.1250 21.5000 4.1250 436000 113000 64300 946000
. 5 5 . 00 0 . 5 00000 0. . 0 5 5000 000 . 0000 HM HM 0
15.1250 21.5000 4.1250 473000 123000 69800 1060000
5. 5 . 50 .550 0000 0. . 000 000 . 0 0000 LM 5 LM 5 0
15.1875 20.2500 3.2500 298000 77300 55400 710000
. 5 . 00 . 00000 0. . 000 000 . 0 0000 M 5 M
15.2460 21.5000 3.4375 359000 93000 66500 886000
. 00 5 . 00 . 00 000 0. . 000 000 . 0 0000 EE 5 5
15.5000 21.5000 3.0000 209000 54100 44100 451000
0 . 5 0. 5 .5 5 5000 0. 0 . 5 00 0 00 . 5 0 000 LL5 LL5 0
15.8750 18.1250 1.1250 50600 13100 9030 159000
0 . 00 50 .000 . 000 0. . 000 000 . 0 0000 L 5 L 5 0
16.0000 20.0000 2.4375 189000 49100 30700 502000
0 . 00 5 . 00 . 00 000 0. . 000 000 . 0 0000 EE 0 5
16.0000 21.5000 3.0000 209000 54100 44100 451000
0 . 00 5 . 00 . 00000 0. . 000 000 . 0 0000 M M
16.0000 21.5000 3.4375 359000 93000 66500 886000
0 . 00 5 . 5 5. 5 00000 0. . 000 5 000 . 0000 LM5 LM5 0
16.0000 21.6250 3.3750 316000 81800 57100 704000
0 . 00 55 . 00 5.0 000 0. . 000 000 . 0 0000 EE 0 0
16.0000 22.0000 2.5625 209000 54100 44100 451000
0 . 00 .000 0. 5 00000 0. 0. 0 0000 0000 0. 0000 H H 0
16.0000 30.0000 7.1250 922000 239000 384000 1540000
0 .5 5 5 . 00 . 0000 0. . 000 000 . 0 0000 M M
16.1250 21.5000 3.4375 325000 84200 60100 768000
5. 5 5 0.550 . 00 0000 0. . 0 000 0000 . 5550000 M M 0
16.3750 23.2500 4.5000 549000 142000 81000 1250000
0. 0 . 50 . 00 000 0.5 . 50000 000 . 0000 EE 5
16.9375 23.7500 3.0000 216000 56100 50400 491000
. 00 5 . 00 .0 000 0. . 5 000 000 . 5 0000 0 5 0 5
17.0000 21.0000 1.8125 138000 35700 18700 342000
. 00 55 . 50 . 50 000 0. . 5 000 00 . 550000 0 0 0
17.0000 21.7500 1.7500 138000 35800 19500 348000
. 00 5 5. 50 . 50 000 0. . 5 000 00 . 550000 0 0 0
17.0000 22.2500 1.7500 138000 35800 19500 348000
. 00 5 .500 . 0000 0.55 . 0 000 000 .0 0000 LM LM 0
17.0000 22.5000 2.9375 271000 70200 65700 632000
. 00 0 . 50 . 00 000 0.5 . 50000 000 . 0000 EE 0 5
17.0000 23.7500 3.0000 216000 56100 50400 491000
. 5 55 . 50 . 50 000 0. . 5 000 00 . 550000 0 0
17.6250 21.7500 1.7500 138000 35800 19500 348000
. 5 55 . 50 . 50 0 000 0. . 5 5 000 00 . 0 5 0000 LL LL 0
17.6250 21.7500 1.7500 136000 35300 22100 340000
. 5 5 5. 50 . 50 000 0. . 5 000 00 . 550000 0 0
17.6250 22.2500 1.7500 138000 35800 19500 348000
50. 50 0 . 50 5. 5 0000 0. 5 . 000 000 . 0000 LM 0 5 LM 0 0
17.7500 23.7500 3.3750 328000 85100 66000 773000
5 .0 5 .0 . 0000 0. 0 . 000 5000 . 5 0000 L5 0 L5 0 0
17.9950 22.5625 2.9375 271000 70300 48400 713000
5 . 00 55 . 50 . 50 000 0. . 5 000 00 . 550000 0 0 0
18.0000 21.7500 1.7500 138000 35800 19500 348000
5 . 00 5 .0 . 0000 0. 0 . 000 5000 . 5 0000 L5 0 L5 0 0
18.0000 22.5625 2.9375 271000 70300 48400 713000
5 . 00 5 . 00 . 00 0000 0. 0 . 000 000 . 0000 EE 0 5
18.0000 23.5000 3.0000 272000 70500 48800 649000
B
Caption:
Caption:
C
D
B
d
a
B TIMKEN PRODUCTS CATALOG
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
0 . 5 .550 - . . 0 .0 .0 . 5 0.0 50 .0 . 0 5. 0 0 0. . 5
4.1250 3.2500 -0.28 0.25 16.02 16.42 0.25 20.47 19.96 0.36 0.21 165.23
0 . 5 .550 - . . 0 .0 .0 . 5 0.0 50 .0 . 0 . 0 0 0 0. 5.0
4.1250 3.2500 -0.28 0.25 16.02 16.42 0.25 20.47 19.96 0.35 0.19 165.50
.550 .500 . . 0 .0 5.0 . 5.0 .0 . 0 . 0 0 0 0. 55 .
3.2500 2.5000 0.64 0.25 15.98 16.34 0.13 19.49 18.98 0.37 0.11
98.74
. . . . .0 .0 . 5 .0 5 0.0 . 0 . 0 0 0. .
3.4375 2.6875 0.70 0.25 16.30 16.69 0.25 20.74 20.08 0.32 0.11 139.27
. 0 55.5 5. . .0 .0 . 5 5.5 50 .0 . 0 . 0 0 0. 0 . 0
2.4063 2.1875 1.40 0.25 16.38 16.77 0.25 20.30 19.84 0.55 0.24
98.54
.5 5 0. . .5 .0 .0 . 5 .0 5.0 . 0 .00 00 5 0 0. 5 .5
1.1250 0.8125 1.63 0.14 16.30 16.46 0.13 17.80 17.52 0.08 0.08
14.41
. . 5 0. . .0 .0 . .0 .0 . 0 . 0 0 0. 0 .
2.4375 1.8750 0.80 0.13 16.65 16.77 0.13 19.37 19.02 0.24 0.11
58.03
. 0 55.5 5. . 5.0 5.0 . 5 5.5 50 .0 . 0 . 0 0 0. 0 0.
2.4063 2.1875 1.40 0.25 16.73 17.13 0.25 20.30 19.84 0.55 0.24
90.12
. . . . .0 .0 . 5 .0 5 0.0 . 0 . 0 0 0. 55.0
3.4375 2.6875 0.70 0.25 16.85 17.24 0.25 20.74 20.08 0.32 0.08 121.28
. . 5.5 . .0 .0 . 5 .5 5 .0 . 0 . 0 00 0. 5 .
3.3125 2.4375 0.61 0.25 16.81 17.20 0.13 20.72 20.43 0.50 0.12 118.34
. 0 . 50 5. . 5.0 5.0 . 5 .0 5 .0 . 0 . 0 0 0. 0 0. 0
2.4063 1.7500 1.40 0.25 16.73 17.13 0.25 20.31 20.31 0.55 0.24
88.84
. 5 0 . 50 . . .5 5 .0 . .5 5 .0 5. 0 0.50 0 0 0. 5 .
6.3750 4.2500 3.12 0.50 18.24 20.20 0.50 28.32 25.87 1.02 0.81 691.76
. . . . .0 0.0 . 5 .0 5 0.0 . 0 . 0 00 5 0. 5 5 .5
3.4375 2.6875 0.70 0.25 16.97 17.32 0.25 20.74 20.08 0.37 0.12 117.98
. 00 . 00 - . . .0 5 .0 . 5 .5 5 .0 0. 0 .00 5 50 0. .
4.5000 3.5000 -0.37 0.25 17.36 17.76 0.25 22.14 21.61 0.42 0.24 208.62
.0 5 50. 00 .0 . 55.0 5.0 . 5 .0 55 .0 . 0 - .50 50 55 0. 0 5 .
2.8750 2.0000 1.85 0.25 17.91 18.31 0.25 22.16 21.97 0.74 -0.06 130.50
.0 . 5 . . .0 50.0 . 5 0.0 5 0.0 . 0 . 0 0 0 0. 5 0.
1.8125 1.3750 0.92 0.13 17.56 17.72 0.13 20.08 20.08 0.16 0.05
45.14
. 50 . 50 . . 5 .0 5 .0 . 5 .0 5 .0 5. 0 . 0 0 0. 0 5.0
1.7500 1.2500 1.03 0.13 17.80 17.95 0.13 20.91 20.91 0.23 0.17
55.18
. 50 . 50 . . 5 .0 5 .0 . 5 .0 5 .0 5. 0 . 0 0 0. 0 . 0
1.7500 1.2500 1.03 0.13 17.80 17.95 0.13 20.91 21.14 0.23 0.17
61.28
. 5 . 50.0 . 5 .0 5 .0 . 5 .0 5 .0 . 0 -0. 0 0 0. .5
2.9375 2.0625 1.97 0.13 17.83 17.99 0.13 21.61 21.14 0.45 0.00 104.81
.0 5 50. 00 .0 . 5 .0 .0 . 5 .0 55 .0 . 0 - .50 50 55 0. 0 5 .5
2.8750 2.0000 1.85 0.25 17.99 18.35 0.25 22.16 21.97 0.74 -0.06 129.14
. 50 . 50 . . .0 .0 . 5 .0 5 .0 5. 0 . 0 0 0. 0 .
1.7500 1.2500 1.03 0.13 18.27 18.39 0.13 20.91 20.91 0.23 0.17
46.77
. .5 5 5. . .0 .0 . 5 5.0 5 .0 . 0 5.00 0 0 0. 0.
1.6385 1.2813 1.38 0.13 18.19 18.35 0.13 20.67 20.79 0.15 0.20
45.69
. 50 . 50 . . .0 .0 . 5 .0 5 .0 5. 0 . 0 0 0. 0 .
1.7500 1.2500 1.03 0.13 18.27 18.39 0.13 20.91 21.14 0.23 0.17
52.87
. 0. 5 0.5 . .0 .0 . 5 .5 5 0.0 . 0 . 0 0 5 0. .
3.3125 2.3750 1.20 0.25 18.66 19.06 0.13 22.82 22.44 0.53 0.13 141.70
. 5 . 50 . . 5.0 5.0 . 55 .0 5 .0 . 0 . 0 0 5 0 0. .
2.9375 2.2500 1.07 0.25 18.70 19.09 0.25 21.97 21.38 0.29 0.14
91.95
. 50 . 50 . . .0 .0 . 5 .0 5 .0 5. 0 . 0 0 0. 0 . 5
1.7500 1.2500 1.03 0.13 18.54 18.66 0.13 20.91 20.91 0.23 0.17
41.57
. 5 . 50 . . 5.0 5.0 . 55 .0 5 .0 . 0 . 0 0 5 0 0. .
2.9375 2.2500 1.07 0.25 18.70 19.09 0.25 21.97 21.38 0.29 0.14
91.80
.0 5 5 . 5 . . .0 .0 . 5 0.5 5 .0 . 0 .00 0 0. . 5
2.8750 2.1250 1.05 0.38 18.82 19.45 0.13 22.47 22.32 0.54 0.16 108.35
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
5 . 00 0 . 50 5. 5 0000 0. 5 . 000 000 . 0000
LM 0 LM 0 0
LM 5 LM 0
EE 0
LL LL
M M 0
0 0 0 5
LM LM 0
EE 0 50
LM LM 0
EE 0 0 0
EE 50
EE 50
EE 5 50
EE 50
EE 00 0
LL5 5 LL5 5 0
M M 0
LL5 5 LL5 5 0
L 5 L 5 0
L 5 L 5 0
LM LM 0
M M 0
LL LL 0
0 5 0 0
EE 0
EE 0
L L 0
L L 0
18.0000 23.7500 3.3750 328000 85100 66000 773000
5 . 00 5. 50 5. 5 0000 0. . 0 0000 5000 . 00000
B
Caption:
18.0000 24.2500 3.3750 373000 96700 55000 921000
5 . 00 0. 0. 50 0000 0. .5 000 000 . 0000
18.0000 28.7460 4.7500 623000 161000 109000 1100000
. 50 5 5. 50 . 5 0000 0. . 000 5 00 . 00000
18.7500 22.2500 1.6250 103000 26800 21600 315000
. 5 . 50 .5 0000 0. . 0 000 000 . 00000
18.8750 26.7500 5.0625 717000 186000 106000 1660000
. 00 5. 50 5 . 5 000 0. 5 . 000 00 . 0000
Caption:
19.0000 24.2500 2.1250 145000 37500 22400 384000
. 00 5. 50 5. 5 0000 0. . 0 0000 5000 . 00000
19.0000 24.2500 3.3750 373000 96700 55000 921000
. 00 . 0. 0000 0. . 5 000 000 . 0 0000
19.0000 24.9950 3.1875 323000 83900 49200 822000
. 50 . . 5 0000 0. . 000 000 . 0000
T
C
19.2500 24.9950 3.3125 357000 92700 75000 871000
. 50 0. 00 . 0 0000 0. . 5 5 5000 000 . 0 5 0000
19.2500 26.0000 3.6875 455000 118000 62000 1030000
. . 0. 0000 0. . 5 000 000 . 0 0000
D
19.6190 24.9950 3.1875 323000 83900 49200 822000
. . 0. 5 0000 0. . 5 0 000 000 . 0 0000
B
d
19.6190 24.9950 3.1875 352000 91200 53500 927000
. 5 . 0. 5 0000 0. . 5 0 000 000 . 0 0000
19.6250 24.9950 3.1875 352000 91200 53500 927000
. 5 . 0. 0000 0. . 5 000 000 . 0 0000
a
19.6250 24.9950 3.1875 323000 83900 49200 822000
50 .000 . 00 .050 5 0000 0. . 5 000 5 000 . 5 0000
20.0000 33.0000 5.7500 796000 206000 169000 1470000
5 . 00 5.000 50. 00 000 0. . 000 000 . 0 0000
21.0000 25.0000 2.0000 171000 44400 30900 459000
5 .5 5 . .050 0000 0. . 0 0 0000 5 0000 . 50000
21.1250 29.9950 5.7500 884000 229000 130000 2080000
5 . 50 5.000 50. 00 000 0. . 000 000 . 0 0000
21.2500 25.0000 2.0000 171000 44400 30900 459000
5 .0 . 50 0. 0000 0. .5 000 000 .55 0000
21.6180 27.2500 3.1875 335000 86800 55900 892000
5 . 5 . 50 0. 0000 0. .5 000 000 .55 0000
21.6250 27.2500 3.1875 335000 86800 55900 892000
55 . 00 . 00 0 . 5 5 0000 0. 5 . 5 000 000 . 0000
22.0000 29.0000 4.1250 567000 147000 87100 1430000
5 .500 . 00 55.5 5 0000 0. . 0 50000 5 000 . 0 00000
22.5000 32.0000 6.1250 999000 259000 147000 2370000
5 . 00 5. 00 . 000 0. . 0 000 5 000 . 0000
23.0000 27.0000 1.9375 176000 45600 34100 513000
5 . 00 5. 00 . 50 000 0.5 . 00 00 . 000
23.5000 27.0000 1.2500 75800 19600 17700 217000
0 . 5 . 00 . 0000 0. . 5 000 000 .5 5 0000
23.7380 31.0000 3.6875 502000 130000 82600 1260000
0 . . 00 . 0000 0. . 5 000 000 .5 5 0000
23.9900 31.0000 3.6875 502000 130000 82600 1260000
0 . .000 5. 50 0000 0. . 50 000 0000 . 0 5 0000
23.9920 30.0000 3.7500 437000 113000 94400 1230000
0 . 00 .000 5. 50 0000 0. . 50 000 0000 . 0 5 0000
24.0000 30.0000 3.7500 437000 113000 94400 1230000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B 0 TIMKEN PRODUCTS CATALOG
Tapered - Type TS
D mens ons, mm (inches)
Factors
We ght
Bear ng
Shaft
Hous ng
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
. 0. 5 0.5 . .0 .0 . 5 .5 5 0.0 . 0 . 0 0 5 0. .
3.3125 2.3750 1.20 0.25 18.86 19.25 0.13 22.82 22.44 0.53 0.13 135.12
5. 5 . 5 . . .0 .0 . 5 .5 5 5.0 . 0 .00 0 0 5 0. .
3.3750 2.6250 0.49 0.25 19.02 19.41 0.25 23.48 23.03 0.32 0.16 156.81
. 00 .550 5. . .0 50 .0 . 0.5 5.0 . 0 0. 0 0 0. 5 .
4.5000 3.2500 0.21 0.38 19.33 19.96 0.25 26.79 26.57 0.78 0.40 361.40
. 5 . 50 5 . . .0 5.0 . 5 .0 5 .0 .50 . 0 0 0 0. .
1.6250 1.2500 2.30 0.13 19.33 19.49 0.13 21.61 21.38 0.14 0.05
42.51
.5 0 . 00 - . . 50 .0 5 .0 . .0 .0 . 0 . 0 0 50 0. 5 .
5.0625 4.0000 -0.35 0.25 19.96 20.31 0.25 25.52 24.92 0.39 0.30 312.24
.0 . 5 . . 50 .0 50 .0 . 5 .0 5 .0 . 0 . 0 50 0 0 0. 05 .
1.8125 1.6250 1.44 0.13 19.72 19.84 0.13 22.80 22.91 0.24 0.12
76.74
5. 5 . 5 . . 50 .0 5 .0 . 5 .5 5 5.0 . 0 .00 0 0 5 0. 5 .
3.3750 2.6250 0.49 0.25 19.72 20.20 0.25 23.48 23.03 0.32 0.16 128.81
0. .500 .0 . 5 0.0 5 .0 . 0 .5 0 .0 . 0 .50 0 0 0. 50 .0
3.1875 2.5000 0.75 0.25 20.08 20.31 0.13 24.00 23.74 0.32 0.10 145.67
. . 0. . 5 0.0 5 .0 . .5 00.0 0. 0 . 0 5 50 0 0. 5 5 .0
3.3125 2.4375 1.61 0.25 20.08 20.55 0.13 24.15 23.62 0.40 0.12 141.27
. 5 . 50 . . 5 .0 5 .0 . 0.5 .0 0.50 . 0 0 0 0. 0 .
3.7188 2.7500 0.19 0.25 20.20 20.55 0.25 24.82 24.57 0.41 0.18 183.89
0. .500 .0 . 5 .0 5 .0 . 0 .5 0 .0 . 0 .50 0 0 0. 50 5 . 0
3.1875 2.5000 0.75 0.25 20.55 20.79 0.13 24.00 23.74 0.32 0.10 128.74
0. .500 .0 . 5 .0 5 .0 . 0 .5 0 .0 . 0 . 0 5 0 0. 5 .
3.1875 2.5000 0.75 0.25 20.55 20.79 0.13 24.00 23.74 0.36 0.06 127.06
0. .500 .0 . 5 .0 5 .0 . 0 .5 0 .0 . 0 . 0 5 0 0. 5 .5
3.1875 2.5000 0.75 0.25 20.55 20.79 0.13 24.00 23.74 0.36 0.06 126.89
0. .500 .0 . 5 .0 5 .0 . 0 .5 0 .0 . 0 .50 0 0 0. 50 5 .
3.1875 2.5000 0.75 0.25 20.55 20.79 0.13 24.00 23.74 0.32 0.10 128.58
. 00 0 . 5 . . 55 .0 5 .0 . .0 5 .0 .50 . 0 50 5 0. . 0
5.5000 4.1250 0.94 0.38 21.73 22.20 0.38 30.23 29.88 0.85 0.33 608.68
50. 00 . 00 50. . 5 .0 55 .0 . .0 .0 . 0 . 0 0 00 0. 0 .
2.0000 1.5000 2.00 0.25 21.61 21.97 0.25 24.45 24.09 0.18 0.11
62.33
.050 . 00 - . . 5 0.0 5 .0 . 5.5 .0 . 0 5.50 0 00 0. 0 .
5.7500 4.5000 -0.38 0.25 22.44 22.68 0.25 28.57 27.99 0.52 0.22 446.67
50. 00 . 00 50. . 555.0 5 .0 . .0 .0 . 0 . 0 0 00 0. 0 .
2.0000 1.5000 2.00 0.25 21.85 22.20 0.25 24.45 24.09 0.18 0.11
57.62
0. . . . 5 0.0 5 .0 . .0 5 .0 . 0 . 0 0 0. 5 .
3.1875 2.4375 1.27 0.25 22.44 22.80 0.25 26.22 25.87 0.34 0.10 148.29
0. . . . 5 0.0 5 .0 . .0 5 .0 . 0 . 0 0 0. 5 .
3.1875 2.4375 1.27 0.25 22.44 22.80 0.25 26.22 25.87 0.34 0.10 148.08
0 . 5 0. 5. . 5 5.0 5 .0 . 0 .0 .0 .00 5.50 0 0 0. 5 .
4.1250 3.1875 0.62 0.25 23.03 23.39 0.25 27.87 27.40 0.35 0.22 249.58
55.5 5 0. 50 - . . 0 .0 5.0 . .5 5 .0 5. 0 5. 0 00 0. 0 .5
6.1250 4.7500 -0.45 0.25 23.98 24.21 0.25 30.46 29.76 0.59 0.23 539.12
. . 5 .5 .5 00.0 0 .0 . .0 .0 5. 0 . 0 5 0 5 0 0. .
1.9375 1.3750 2.54 0.14 23.62 23.74 0.13 26.34 26.10 0.20 0.10
63.57
. 50 5. 00 .0 .5 5.0 5.0 . .0 .0 . 0 .50 0 0 0. 5 .
1.2500 1.0000 3.78 0.14 24.21 24.21 0.13 26.34 26.10 0.07 -0.06
36.95
. . 50 .5 . 0.0 .0 . 55.5 .0 . 0 . 0 0 0. 0 0.
3.6875 2.7500 1.24 0.25 24.80 25.16 0.25 29.74 29.41 0.44 0.24 244.10
. . 50 .5 . .0 .0 . 55.5 .0 . 0 . 0 0 0. 0 0 .
3.6875 2.7500 1.24 0.25 24.92 25.28 0.25 29.74 29.41 0.44 0.24 234.25
.0 5 . 5 . . .0 .0 . .0 0.0 . 0 5. 0 5 0 0 0 0. 0 .
3.6250 2.8125 2.28 0.25 24.92 25.28 0.25 29.17 28.35 0.46 0.20 204.86
.0 5 . 5 . . .0 .0 . .0 0.0 . 0 5. 0 5 0 0 0 0. 0 .
3.6250 2.8125 2.28 0.25 24.92 25.28 0.25 29.17 28.35 0.46 0.20 204.55
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B
•
Caption:
ROLLER BEARINGS
D mens ons, mm (inches)
Load Rat ngs, N (lbf.)
Dynam c (1) Factors (5) Dynam c (2) Factors (5) Stat c Part Number
TS SINGLE-ROW
d D T C e Y C 0 Ca 0 K C0 Inner Outer
0 . 00 . 00 5. 5 0000 0. 0 . 5 000 5 000 . 5 0000
L5 00 L5 00 0
EE 0 0
LL5 00 LL5 00 0
M 5 M 0
L L 0
L L 0
EE 0
LL LL
LM LM 0
M M 0
L L 0
L L 0
LL5 LL5 0
EE 0 0
EE 0 5 0
24.0000 30.5000 3.3750 444000 115000 79300 1040000
0 . 00 . 00 . 0000 0. . 5 000 000 .5 5 0000
B
Caption:
24.0000 31.0000 3.6875 502000 130000 82600 1260000
5. 50 0 .0 5 . 5 5 000 0. .55 5 000 0 000 .5 0000
24.2500 27.8750 1.6250 133000 34500 22900 414000
5.000 . 50 . 5 50000 0. . 0 0000 000 . 00000
25.0000 36.7500 7.0625 1290000 335000 191000 3120000
0. 5 . 00 5. 50 0000 0. . 0 5 000 0000 . 5 0000
25.9935 32.0000 3.7500 487000 126000 71900 1340000
0. 00 . 00 5. 50 0000 0. . 0 5 000 0000 . 5 0000
Caption:
26.0000 32.0000 3.7500 487000 126000 71900 1340000
0. 00 5 .0 5 5. 5 0000 0. 5 . 000 000 . 0000
26.0000 33.6250 3.3750 431000 112000 67100 1040000
. 00 . 50 . 5 0 0000 0. . 000 000 . 0000
26.5000 31.2500 2.6250 244000 63300 39000 707000
. 50 0 . 00 . 5 0000 0. . 0 0000 000 . 000000
T
C
26.7500 35.5000 5.6250 964000 250000 142000 2480000
. 5 5. 00 5. 0000 0. . 0 5 0000 0 000 . 00000
26.8750 38.0000 7.3125 1380000 357000 203000 3340000
5 . 5 .000 . 00 0 0000 0. . 5 000 000 . 0000
D
29.9183 35.0000 3.5000 452000 117000 61300 1400000
.000 .000 . 00 0 0000 0. . 5 000 000 . 0000
B
d
30.0000 35.0000 3.5000 452000 117000 61300 1400000
0 . . 00 5 . 0 0000 0. 0 .5 000 000 . 0000
31.5625 36.0000 2.3125 239000 62000 42100 778000
. 00 0 . 00 . 0000 0. . 5 000 0000 . 5 0000
a
33.0000 41.0000 3.6875 487000 126000 94500 1330000
0 . 00 0. 00 5. 50 0000 0.5 .05 5 000 5 000 .0 0000
43.0000 52.0000 3.7500 512000 133000 130000 1570000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B TIMKEN PRODUCTS CATALOG
Tapered - Type TS
. 5 0. 5 5. . .0 .0 . .5 .0 - . 0 . 0 0 0. .5
3.1250 2.3750 1.78 0.25 24.92 25.28 0.25 29.51 29.17 -0.35 0.15 181.94
. . 50 .5 . .0 .0 . 55.5 .0 . 0 . 0 0 0. 0 0 .0
3.6875 2.7500 1.24 0.25 24.92 25.28 0.25 29.74 29.41 0.44 0.24 233.86
. 5 . . .5 0.0 .0 . 0.0 .0 . 0 . 0 0 0 0 0. .
1.6250 1.1562 2.43 0.14 24.80 24.92 0.13 27.17 27.05 0.12 0.11
51.21
. 00 . - .5 .0 .0 .0 . .5 0.0 . 0 . 0 00 05 0. 5 0 .
7.0000 5.5625 -0.53 0.47 27.05 27.52 0.25 35.02 34.25 0.71 0.38 885.40
5. 50 .0 5 . . .0 .0 . .5 .0 .00 .50 00 5 0. . 0
3.7500 2.8750 1.10 0.25 26.81 27.28 0.25 31.04 30.59 0.35 0.18 217.60
5. 50 .0 5 . . .0 .0 . .5 .0 .00 .50 00 5 0. .5
3.7500 2.8750 1.10 0.25 26.81 27.28 0.25 31.04 30.59 0.35 0.18 217.32
5. 0. 5 . . .0 0 .0 . .0 .0 . 0 . 0 0 0 0. 0 0 .
3.3649 2.3750 1.55 0.38 27.05 27.64 0.25 32.01 32.01 0.46 0.09 240.16
. . 5 . . 0.0 0 .0 . .0 5.0 . 0 . 0 0 50 0. 5 5 .
2.4375 1.9375 2.12 0.25 27.17 27.64 0.25 30.35 30.12 0.16 0.06 114.12
. 5 . 5 . . .0 .0 . .5 5 .0 . 0 . 0 00 0. 5 5.
5.6250 4.3750 0.27 0.38 28.11 28.58 0.25 34.12 33.54 0.50 0.29 518.42
5. . 5 - 5. . .0 .0 . .5 00.0 . 0 0.50 00 0. 0 .5
7.3125 5.6250 -0.60 0.38 28.46 29.06 0.25 36.21 35.43 0.76 0.41 900.73
. 00 .000 .5 . 0.0 .0 . .0 .0 . 0 .00 00 0 0 0. 0 .
3.5000 2.8346 1.36 0.13 30.71 30.83 0.13 34.33 34.02 0.18 0.24 198.38
. 00 .000 .5 . 0.0 .0 . .0 .0 . 0 .00 00 0 0 0. 0 .
3.5000 2.8346 1.36 0.13 30.71 30.83 0.13 34.33 34.02 0.18 0.24 194.58
5 . . 5 .0 .5 .0 .0 . .0 .0 . 0 . 0 00 00 0. 05 5 .
2.3125 1.6250 3.11 0.14 32.24 32.36 0.13 35.20 34.96 0.31 0.12 116.16
. 00 . 5 . . 0.0 .0 . 00 .0 .0 . 0 . 0 00 0 0. 5 .5
3.5000 2.6250 3.27 0.25 34.25 34.49 0.25 39.41 39.21 0.63 0.19 340.78
. 00 . 50 5. . 0.0 5.0 . .5 0.0 5. 0 . 0 00 0 0. .
3.5000 2.7500 6.92 0.25 44.49 44.69 0.25 50.14 49.61 0.61 0.19 504.09
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
If you need a product other than those shown here, please contact your T mken representat ve.
D mens ons, mm (inches)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
Factors
We ght
kg (lbs.)
Bear ng
Hous ng
Shaft
Cage
B C a(3) R(4) da db r (4) Da Db Aa Ab G G Cg
B
Caption:
TIMKEN PRODUCTS CATALOG B
•
ROLLER BEARINGS
Caption:
NOTES
B
Caption:
•
B TIMKEN PRODUCTS CATALOG
Type TS Tapered Roller Bearings
Tapered - Type TSF
Caption:
TSF
TAPERED ROLLER BEARINGS
• Flange of the single-row type bearing is used for axial location in a housing.
• Through-boring of the housing results in accurately aligned seats.
• Flange is not normally clamped in position.
• To place an order or obtain a quotation, specify the inner- and outer-race part numbers. Example: inner race outer race
37425 - 37625-B
• Flanged outer race can be used with any single inner race from the same ‘series.’
• The most commonly speci?ed inner race part numbers are shown in the tables provided.
• Please consult a Timken representative for more information.
B
Caption:
Caption:
BEARING DATA TABLES
In the following bearing data tables, part numbers are listed in ascending order of bore, outside diameter and width.
Bearing ratings shown in tables are based on environmental reference conditions. Effects of known operating conditions on bearing performance in an application should be investigated before ?nal bearing selection is made.
Approximate mass is listed for every part number. For weight-critical applications or exact freight cost evaluation purposes, a more accurate value should be obtained from your Timken representative.
TIMKEN PRODUCTS CATALOG B195
•
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF SINGLE-ROW
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
7.938 31.991 4.458 10600 0.41 1.48 2750 1910 1.44 9230
A2031 A2126-B
A2037 A2126-B
A2047 A2126-B
A4050 A4138-B
A4059 A4138-B
A6062 A6157-B
17580 17520-B
05062 05185-B
A6067 A6157-B
05066 05185-B
A6075 A6157-B
05075 05185-B
05075X 05185-B
09067 09195AB
21075 21212-B
1775 1729-B
05079 05185-B
07079 07204-B
09081 09195AB
3660 3620-B
07087 07196-B
07087X 07210XB
07087 07204-B
1755 1729-B
1975 1931-B
2684 2631-B
07093 07204-B
1779 1729-B
Caption:
0.3125 1.2595 0.1755 2380 618 429 2070
9.525 31.991 4.458 10600 0.41 1.48 2750 1910 1.44 9230
B
0.3750 1.2595 0.1755 2380 618 429 2070
11.987 31.991 4.458 10600 0.41 1.48 2750 1910 1.44 9230
0.4719 1.2595 0.1755 2380 618 429 2070
12.700 34.988 4.630 12200 0.45 1.32 3160 2450 1.29 11500
0.5000 1.3775 0.1823 2740 710 550 2580
14.987 34.988 4.630 12200 0.45 1.32 3160 2450 1.29 11500
0.5901 1.3775 0.1823 2740 710 550 2580
15.875 39.992 4.851 12400 0.53 1.14 3220 2900 1.11 12300
Caption:
0.6250 1.5745 0.1910 2790 724 653 2770
15.875 42.862 6.350 29100 0.33 1.81 7550 4280 1.76 29200
0.6250 1.6875 0.2500 6540 1700 962 6560
15.875 47.000 6.038 24700 0.36 1.68 6420 3920 1.64 25400
0.6250 1.8504 0.2377 5560 1440 881 5720
16.993 39.992 4.851 12400 0.53 1.14 3220 2900 1.11 12300
0.6690 1.5745 0.1910 2790 724 653 2770
16.993 47.000 6.038 24700 0.36 1.68 6420 3920 1.64 25400
T 1
C 2
C
0.6690 1.8504 0.2377 5560 1440 881 5720
19.050 39.992 4.851 12400 0.53 1.14 3220 2900 1.11 12300
0.7500 1.5745 0.1910 2790 724 653 2770
19.050 47.000 6.038 24700 0.36 1.68 6420 3920 1.64 25400
D 1
D
0.7500 1.8504 0.2377 5560 1440 881 5720
19.050 47.000 14.381 24700 0.36 1.68 6420 3920 1.64 25400
d B
0.7500 1.8504 0.5662 5560 1440 881 5720
19.050 49.225 6.998 39700 0.27 2.26 10300 4680 2.20 40500
0.7500 1.9380 0.2755 8920 2310 1050 9100
19.050 53.975 10.317 43000 0.59 1.02 11200 11300 0.99 42500
a
0.7500 2.1250 0.4062 9670 2510 2540 9560
19.050 56.896 7.455 42000 0.31 1.95 10900 5740 1.90 45300
0.7500 2.2400 0.2935 9450 2450 1290 10200
19.987 47.000 6.048 24700 0.36 1.68 6420 3920 1.64 25400
0.7869 1.8504 0.2381 5560 1440 881 5720
20.000 51.994 5.080 27000 0.40 1.49 6990 4810 1.45 29600
0.7874 2.0470 0.2000 6060 1570 1080 6650
20.625 49.225 8.809 39700 0.27 2.26 10300 4680 2.20 40500
R
0.8120 1.9380 0.3468 8920 2310 1050 9100
20.638 61.912 9.525 82000 0.28 2.13 21300 10300 2.07 89800
d b D a
d a
0.8125 2.4375 0.3750 18400 4780 2310 20200
22.225 50.005 6.749 27000 0.40 1.49 6990 4810 1.45 29600
0.8750 1.9687 0.2657 6060 1570 1080 6650
22.225 50.800 5.080 27000 0.40 1.49 6990 4810 1.45 29600
0.8750 2.0000 0.2000 6060 1570 1080 6650
22.225 51.994 5.080 27000 0.40 1.49 6990 4810 1.45 29600
0.8750 2.0470 0.2000 6060 1570 1080 6650
22.225 56.896 7.463 42000 0.31 1.95 10900 5740 1.90 45300
0.8750 2.2400 0.2938 9450 2450 1290 10200
22.225 60.325 7.938 44800 0.33 1.82 11600 6560 1.77 50200
0.8750 2.3750 0.3125 10100 2610 1470 11300
22.225 66.421 8.725 71000 0.25 2.36 18400 8000 2.30 81700
0.8750 2.6150 0.3435 16000 4140 1800 18400
23.812 51.994 5.080 27000 0.40 1.49 6990 4810 1.45 29600
0.9375 2.0470 0.2000 6060 1570 1080 6650
23.812 56.896 7.463 42000 0.31 1.95 10900 5740 1.90 45300
0.9375 2.2400 0.2938 9450 2450 1290 10200
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
•
B196 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
10.785 7.938 -3.0 35.166 2.388 0.5 12.5 13.0 30.0 1.7 3.17 0.0308 0.05
0.4246 0.3125 -0.12 1.3845 0.0940 0.02 0.49 0.51 1.18
0.11
10.785 7.938 -3.0 35.166 2.388 1.3 13.5 15.0 30.0 1.7 3.17 0.0308 0.05
0.4246 0.3125 -0.12 1.3845 0.0940 0.05 0.53 0.59 1.18
0.11
10.785 7.938 -3.0 35.166 2.388 0.8 15.5 16.5 30.0 1.7 3.17 0.0308 0.05
0.4246 0.3125 -0.12 1.3845 0.0940 0.03 0.61 0.65 1.18
0.10
10.988 8.730 -2.5 38.062 2.362 1.3 17.0 18.5 33.5 2.3 4.12 0.0355 0.06
0.4326 0.3437 -0.10 1.4985 0.0930 0.05 0.67 0.73 1.32
0.12
10.988 8.730 -2.5 38.062 2.362 0.8 19.0 19.5 33.5 2.3 4.12 0.0355 0.05
0.4326 0.3437 -0.10 1.4985 0.0930 0.03 0.75 0.77 1.32
0.12
11.153 9.525 -1.5 43.066 2.362 1.3 20.5 22.0 38.0 2.9 5.64 0.0404 0.08
0.4391 0.3750 -0.06 1.6955 0.0930 0.05 0.81 0.87 1.50
0.17
16.670 13.495 -5.8 45.936 3.175 1.5 21.0 23.0 40.5 5.3 4.53 0.0423 0.13
0.6563 0.5313 -0.23 1.8085 0.1250 0.06 0.83 0.91 1.59
0.29
14.381 11.112 -4.1 50.861 2.769 1.5 21.0 23.5 44.5 5.8 5.55 0.0448 0.14
0.5662 0.4375 -0.16 2.0024 0.1090 0.06 0.83 0.93 1.75
0.31
11.153 9.525 -1.5 43.066 2.362 0.8 21.0 22.0 38.0 2.9 5.64 0.0404 0.08
0.4391 0.3750 -0.06 1.6955 0.0930 0.03 0.83 0.87 1.50
0.17
14.381 11.112 -4.1 50.861 2.769 1.5 22.0 24.5 44.5 5.8 5.55 0.0448 0.14
0.5662 0.4375 -0.16 2.0024 0.1090 0.06 0.87 0.96 1.75
0.30
11.153 9.525 -1.5 43.066 2.362 1.0 23.0 24.0 38.0 2.9 5.64 0.0404 0.07
0.4391 0.3750 -0.06 1.6955 0.0930 0.04 0.91 0.94 1.50
0.16
14.381 11.112 -4.1 50.861 2.769 1.3 23.5 25.0 44.5 5.8 5.55 0.0448 0.13
0.5662 0.4375 -0.16 2.0024 0.1090 0.05 0.93 0.98 1.75
0.29
14.381 11.112 -4.1 50.861 2.769 1.5 23.5 25.5 44.5 5.8 5.55 0.0448 0.13
0.5662 0.4375 -0.16 2.0024 0.1090 0.06 0.93 1.00 1.75
0.29
19.050 14.288 -7.4 53.081 3.251 1.3 24.0 25.5 46.5 8 4.05 0.0452 0.18
0.7500 0.5625 -0.29 2.0898 0.1280 0.05 0.94 1.00 1.83
0.40
21.839 15.875 -5.8 57.841 3.967 1.5 26.0 31.5 52.0 7 3.55 0.0558 0.26
0.8598 0.6250 -0.23 2.2772 0.1562 0.06 1.03 1.24 2.05
0.57
19.837 15.875 -6.9 60.757 3.962 1.5 25.0 27.0 53.0 10.6 5.39 0.0521 0.28
0.7810 0.6250 -0.27 2.3920 0.1560 0.06 0.98 1.06 2.09
0.62
14.381 11.112 -4.1 50.861 2.769 1.5 24.0 26.5 44.5 5.8 5.55 0.0448 0.13
0.5662 0.4375 -0.16 2.0024 0.1090 0.06 0.94 1.04 1.75
0.28
14.260 12.700 -2.8 55.855 2.769 1.5 26.0 27.5 50.0 7.6 7.07 0.0509 0.17
0.5614 0.5000 -0.11 2.1990 0.1090 0.06 1.02 1.08 1.97
0.38
21.539 14.288 -9.1 53.081 3.251 1.5 25.5 27.5 46.5 8 4.05 0.0452 0.18
0.8480 0.5625 -0.36 2.0898 0.1280 0.06 1.00 1.08 1.83
0.40
30.416 23.812 -11.9 66.571 4.762 2.3 29.5 33.5 59.0 17 6.38 0.0592 0.48
1.1975 0.9375 -0.47 2.6209 0.1875 0.09 1.16 1.32 2.32
1.07
14.260 9.525 -2.8 53.871 2.779 1.3 27.0 28.5 49.0 7.6 7.07 0.0509 0.13
0.5614 0.3750 -0.11 2.1209 0.1094 0.05 1.06 1.12 1.93
0.30
14.260 12.700 -2.8 54.762 2.769 1.5 27.0 29.0 49.0 7.6 7.07 0.0509 0.15
0.5614 0.5000 -0.11 2.1560 0.1090 0.06 1.06 1.14 1.93
0.34
14.260 12.700 -2.8 55.855 2.769 1.3 27.0 28.5 50.0 7.6 7.07 0.0509 0.16
0.5614 0.5000 -0.11 2.1990 0.1090 0.05 1.06 1.12 1.97
0.36
19.837 15.875 -6.9 60.757 3.962 1.3 27.5 29.0 53.0 10.6 5.39 0.0521 0.26
0.7810 0.6250 -0.27 2.3920 0.1560 0.05 1.08 1.14 2.09
0.58
19.355 15.875 -5.8 64.186 3.967 0.8 28.0 29.0 57.0 12.5 6.33 0.0565 0.31
0.7620 0.6250 -0.23 2.5270 0.1562 0.03 1.10 1.14 2.24
0.68
25.433 19.050 -9.4 70.282 3.962 1.5 32.0 34.0 62.0 19.3 8 0.0598 0.47
1.0013 0.7500 -0.37 2.7670 0.1560 0.06 1.26 1.34 2.44
1.04
14.260 12.700 -2.8 55.855 2.769 1.5 28.5 30.5 50.0 7.6 7.07 0.0509 0.16
0.5614 0.5000 -0.11 2.1990 0.1090 0.06 1.12 1.20 1.97
0.34
19.837 15.875 -6.9 60.757 3.962 0.8 28.5 29.5 53.0 10.6 5.39 0.0521 0.26
0.7810 0.6250 -0.27 2.3920 0.1560 0.03 1.12 1.16 2.09
0.56
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B197
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF SINGLE-ROW
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
23.812 72.000 7.087 54400 0.36 1.67 14100 8700 1.62 60100
26093 26283-B
07098 07196-B
07098 07204-B
07100-SA 07210XB
15578 15520-B
1986 1932-B
1986 1931-B
23100 23256-B
2687 2631-B
02473 02420-B
26100 26283-B
3189 3120-B
41100 41286-B
1987 1931-B
2688 2631-B
41106 41286-B
15590 15520-B
1985 1931-B
2689 2631-B
2578 2523-B
26112 26283-B
3192 3120-B
3198 3120-B
41125 41286-B
2690 2631-B
2691 2631-B
17118 17244-B
02474A 02420-B
Caption:
0.9375 2.8346 0.2790 12200 3170 1960 13500
24.981 50.005 6.749 27000 0.40 1.49 6990 4810 1.45 29600
B
0.9835 1.9687 0.2657 6060 1570 1080 6650
24.981 51.994 5.080 27000 0.40 1.49 6990 4810 1.45 29600
0.9835 2.0470 0.2000 6060 1570 1080 6650
25.400 50.800 5.080 27000 0.40 1.49 6990 4810 1.45 29600
1.0000 2.0000 0.2000 6060 1570 1080 6650
25.400 57.150 7.938 42600 0.35 1.73 11000 6550 1.69 50100
1.0000 2.2500 0.3125 9570 2480 1470 11300
25.400 58.738 7.938 44800 0.33 1.82 11600 6560 1.77 50200
Caption:
1.0000 2.3125 0.3125 10100 2610 1470 11300
25.400 60.325 7.938 44800 0.33 1.82 11600 6560 1.77 50200
1.0000 2.3750 0.3125 10100 2610 1470 11300
25.400 65.088 10.320 50600 0.73 0.82 13100 16400 0.80 55800
1.0000 2.5625 0.4063 11400 2950 3690 12500
25.400 66.421 8.725 71000 0.25 2.36 18400 8000 2.30 81700
1.0000 2.6150 0.3435 16000 4140 1800 18400
25.400 68.262 8.730 59100 0.42 1.44 15300 10900 1.40 70200
T 1
C 2
C
1.0000 2.6875 0.3437 13300 3440 2450 15800
25.400 72.000 7.087 54400 0.36 1.67 14100 8700 1.62 60100
1.0000 2.8346 0.2790 12200 3170 1960 13500
25.400 72.626 11.112 87700 0.33 1.80 22700 13000 1.76 102000
D 1
D
1.0000 2.8593 0.4375 19700 5110 2910 22800
25.400 72.626 12.700 64600 0.60 1.00 16700 17300 0.97 64100
d B
1.0000 2.8593 0.5000 14500 3760 3880 14400
26.975 60.325 7.938 44800 0.33 1.82 11600 6560 1.77 50200
1.0620 2.3750 0.3125 10100 2610 1470 11300
26.987 66.421 8.725 71000 0.25 2.36 18400 8000 2.30 81700
a
1.0625 2.6150 0.3435 16000 4140 1800 18400
26.987 72.626 12.700 64600 0.60 1.00 16700 17300 0.97 64100
1.0625 2.8593 0.5000 14500 3760 3880 14400
28.575 57.150 8.166 42600 0.35 1.73 11000 6550 1.69 50100
1.1250 2.2500 0.3215 9570 2480 1470 11300
28.575 60.325 7.938 44800 0.33 1.82 11600 6560 1.77 50200
1.1250 2.3750 0.3125 10100 2610 1470 11300
28.575 66.421 8.725 71000 0.25 2.36 18400 8000 2.30 81700
R
1.1250 2.6150 0.3435 16000 4140 1800 18400
28.575 69.850 8.733 77500 0.27 2.19 20100 9410 2.14 94400
d b D a
d a
1.1250 2.7500 0.3438 17400 4520 2120 21200
28.575 72.000 7.087 54400 0.36 1.67 14100 8700 1.62 60100
1.1250 2.8346 0.2790 12200 3170 1960 13500
28.575 72.626 11.112 87700 0.33 1.80 22700 13000 1.76 102000
1.1250 2.8593 0.4375 19700 5110 2910 22800
28.575 72.626 11.112 87700 0.33 1.80 22700 13000 1.76 102000
1.1250 2.8593 0.4375 19700 5110 2910 22800
28.575 72.626 12.700 64600 0.60 1.00 16700 17300 0.97 64100
1.1250 2.8593 0.5000 14500 3760 3880 14400
29.367 66.421 8.725 71000 0.25 2.36 18400 8000 2.30 81700
1.1562 2.6150 0.3435 16000 4140 1800 18400
29.367 66.421 8.725 71000 0.25 2.36 18400 8000 2.30 81700
1.1562 2.6150 0.3435 16000 4140 1800 18400
29.987 62.000 5.270 40000 0.38 1.57 10400 6800 1.53 44100
1.1806 2.4409 0.2075 9000 2330 1530 9910
29.987 68.262 8.730 59100 0.42 1.44 15300 10900 1.40 70200
1.1806 2.6875 0.3437 13300 3440 2450 15800
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
•
B198 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
18.923 15.875 -4.1 75.857 3.962 2.3 31.0 35.0 66.0 16.1 10.1 0.0630 0.44
0.7450 0.6250 -0.16 2.9865 0.1560 0.09 1.22 1.38 2.60
0.96
14.260 9.525 -2.8 53.871 2.779 1.5 29.0 31.0 49.0 7.6 7.07 0.0509 0.12
0.5614 0.3750 -0.11 2.1209 0.1094 0.06 1.14 1.22 1.93
0.27
14.260 12.700 -2.8 55.855 2.769 1.5 29.0 31.0 50.0 7.6 7.07 0.0509 0.15
0.5614 0.5000 -0.11 2.1990 0.1090 0.06 1.14 1.22 1.97
0.33
14.260 12.700 -2.8 54.762 2.769 3.3 29.5 35.0 49.0 7.6 7.07 0.0509 0.14
0.5614 0.5000 -0.11 2.1560 0.1090 0.13 1.16 1.38 1.93
0.30
17.462 13.495 -5.1 61.016 3.970 1.3 30.5 32.5 60.0 12.7 10.3 0.0577 0.24
0.6875 0.5313 -0.20 2.4022 0.1563 0.05 1.20 1.28 2.36
0.52
19.355 15.080 -5.8 62.598 3.967 1.3 30.5 32.5 56.0 12.5 6.33 0.0565 0.27
0.7620 0.5937 -0.23 2.4645 0.1562 0.05 1.20 1.28 2.20
0.59
19.355 15.875 -5.8 64.186 3.967 1.3 30.5 32.5 57.0 12.5 6.33 0.0565 0.29
0.7620 0.6250 -0.23 2.5270 0.1562 0.05 1.20 1.28 2.24
0.64
21.463 15.875 -2.3 68.953 3.970 1.5 34.5 39.0 63.0 11.3 6.57 0.0700 0.38
0.8450 0.6250 -0.09 2.7147 0.1563 0.06 1.36 1.54 2.48
0.83
25.433 19.050 -9.4 70.282 3.962 1.3 31.5 33.5 62.0 19.3 8 0.0598 0.45
1.0013 0.7500 -0.37 2.7670 0.1560 0.05 1.24 1.32 2.44
0.99
22.225 17.462 -5.1 72.128 3.967 0.8 33.5 34.5 65.0 17.5 8.48 0.0681 0.48
0.8750 0.6875 -0.20 2.8397 0.1562 0.03 1.32 1.36 2.56
1.06
18.923 15.875 -4.1 75.857 3.962 1.5 32.5 34.5 66.0 16.1 10.1 0.0630 0.43
0.7450 0.6250 -0.16 2.9865 0.1560 0.06 1.28 1.36 2.60
0.94
29.997 23.812 -10.2 77.300 4.762 0.8 35.0 35.5 69.0 23.4 8.76 0.0697 0.67
1.1810 0.9375 -0.40 3.0433 0.1875 0.03 1.38 1.40 2.72
1.49
24.257 17.462 -4.1 78.082 5.555 2.3 36.5 41.0 70.0 13 5.83 0.0686 0.52
0.9550 0.6875 -0.16 3.0741 0.2187 0.09 1.44 1.61 2.76
1.16
19.355 15.875 -5.8 64.186 3.967 0.8 31.5 32.5 57.0 12.5 6.33 0.0565 0.28
0.7620 0.6250 -0.23 2.5270 0.1562 0.03 1.24 1.28 2.24
0.62
25.433 19.050 -9.4 70.282 3.962 1.5 33.0 35.0 62.0 19.3 8 0.0598 0.44
1.0013 0.7500 -0.37 2.7670 0.1560 0.06 1.30 1.38 2.44
0.96
24.257 17.462 -4.1 78.082 5.555 2.3 36.5 42.0 70.0 13 5.83 0.0686 0.51
0.9550 0.6875 -0.16 3.0741 0.2187 0.09 1.44 1.65 2.76
1.13
17.462 13.495 -5.1 61.016 3.970 3.5 33.5 39.5 60.0 12.7 10.3 0.0577 0.21
0.6875 0.5313 -0.20 2.4022 0.1563 0.14 1.32 1.56 2.36
0.47
19.355 15.875 -5.8 64.186 3.967 0.8 33.5 34.0 57.0 12.5 6.33 0.0565 0.27
0.7620 0.6250 -0.23 2.5270 0.1562 0.03 1.32 1.34 2.24
0.59
25.433 19.050 -9.4 70.282 3.962 1.3 34.0 36.0 62.0 19.3 8 0.0598 0.42
1.0013 0.7500 -0.37 2.7670 0.1560 0.05 1.34 1.42 2.44
0.93
25.357 19.050 -8.6 73.711 3.962 2.3 35.0 39.0 66.0 23.6 9.63 0.0656 0.49
0.9983 0.7500 -0.34 2.9020 0.1560 0.09 1.38 1.54 2.60
1.09
18.923 15.875 -4.1 75.857 3.962 1.5 35.0 37.0 66.0 16.1 10.1 0.0630 0.41
0.7450 0.6250 -0.16 2.9865 0.1560 0.06 1.38 1.46 2.60
0.90
29.997 23.812 -10.2 77.300 4.762 3.5 37.0 43.5 69.0 23.4 8.76 0.0697 0.64
1.1810 0.9375 -0.40 3.0433 0.1875 0.14 1.46 1.71 2.72
1.41
29.997 23.812 -10.2 77.300 4.762 1.3 37.0 39.0 69.0 23.4 8.76 0.0697 0.64
1.1810 0.9375 -0.40 3.0433 0.1875 0.05 1.46 1.54 2.72
1.42
24.257 17.462 -4.1 78.082 5.555 4.8 36.5 48.0 70.0 13 5.83 0.0686 0.49
0.9550 0.6875 -0.16 3.0741 0.2187 0.19 1.44 1.89 2.76
1.09
25.433 19.050 -9.4 70.282 3.962 3.5 35.0 41.0 62.0 19.3 8 0.0598 0.41
1.0013 0.7500 -0.37 2.7670 0.1560 0.14 1.38 1.61 2.44
0.91
25.433 19.050 -9.4 70.282 3.962 0.8 36.5 37.5 62.0 19.3 8 0.0598 0.42
1.0013 0.7500 -0.37 2.7670 0.1560 0.03 1.44 1.48 2.44
0.92
16.566 14.288 -3.6 65.862 3.556 1.5 34.5 37.0 59.0 11.8 7.49 0.0579 0.24
0.6522 0.5625 -0.14 2.5930 0.1400 0.06 1.36 1.46 2.32
0.53
22.225 17.462 -5.1 72.128 3.967 0.8 38.5 39.5 65.0 17.5 8.48 0.0681 0.45
0.8750 0.6875 -0.20 2.8397 0.1562 0.03 1.52 1.56 2.56
0.99
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B199
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF
SINGLE-ROW
T 1
a
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
29.987 72.000 7.087 54400 0.36 1.67 14100 8700 1.62 60100 26118 26283-B
1.1806 2.8346 0.2790 12200 3170 1960 13500
30.000 69.012 7.932 50600 0.38 1.57 13100 8570 1.53 61700 14117A 14276-B
1.1811 2.7170 0.3123 11400 2950 1930 13900
30.000 69.012 7.932 50600 0.38 1.57 13100 8570 1.53 61700 14118 14276-B
1.1811 2.7170 0.3123 11400 2950 1930 13900
30.000 72.000 7.087 54400 0.36 1.67 14100 8700 1.62 60100 26118-S 26283-B
1.1811 2.8346 0.2790 12200 3170 1960 13500
30.000 72.626 11.112 87700 0.33 1.80 22700 13000 1.76 102000 3190 3120-B
1.1811 2.8593 0.4375 19700 5110 2910 22800
30.162 62.000 5.270 40000 0.38 1.57 10400 6800 1.53 44100 17119 17244-B
1.1875 2.4409 0.2075 9000 2330 1530 9910
30.162 64.292 8.763 55700 0.55 1.10 14500 13500 1.07 71700 M86649 M86611-B
1.1875 2.5312 0.3450 12500 3250 3040 16100
30.162 69.850 8.733 77500 0.27 2.19 20100 9410 2.14 94400 2558 2523-B
1.1875 2.7500 0.3438 17400 4520 2120 21200
30.162 72.626 11.112 87700 0.33 1.80 22700 13000 1.76 102000 3187 3120-B
1.1875 2.8593 0.4375 19700 5110 2910 22800
30.162 72.626 11.112 87700 0.33 1.80 22700 13000 1.76 102000 3191 3120-B
1.1875 2.8593 0.4375 19700 5110 2910 22800
30.162 79.375 10.320 96900 0.37 1.64 25100 15700 1.60 119000 3474 3420-B
1.1875 3.1250 0.4063 21800 5650 3530 26800
30.162 80.000 7.938 73600 0.27 2.20 19100 8920 2.14 83400 334 332-B
1.1875 3.1496 0.3125 16600 4290 2010 18700
30.162 80.000 9.100 58800 0.40 1.49 15200 10500 1.45 68900 28118 28315-B
1.1875 3.1496 0.3583 13200 3430 2360 15500
30.213 63.500 8.730 46800 0.35 1.71 12100 7280 1.67 53900 15118 15250-B
1.1895 2.5000 0.3437 10500 2730 1640 12100
31.750 58.738 6.736 29300 0.47 1.27 7610 6170 1.23 35000 08125 08231-B
1.2500 2.3125 0.2652 6600 1710 1390 7880
31.750 58.877 6.833 36500 0.41 1.46 9460 6680 1.42 44600 LM67048 LM67010-BA
1.2500 2.3180 0.2690 8210 2130 1500 10000
31.750 59.131 6.833 36500 0.41 1.46 9460 6680 1.42 44600 LM67047 LM67010-B
1.2500 2.3280 0.2690 8210 2130 1500 10000
31.750 59.131 15.875 36500 0.41 1.46 9460 6680 1.42 44600 LM67048 LM67010-B
1.2500 2.3280 0.6250 8210 2130 1500 10000
31.750 63.500 7.841 46800 0.35 1.71 12100 7280 1.67 53900 15123 15250-B
1.2500 2.5000 0.3087 10500 2730 1640 12100
31.750 63.500 8.730 46800 0.35 1.71 12100 7280 1.67 53900 15125 15250-B
1.2500 2.5000 0.3437 10500 2730 1640 12100
31.750 68.262 8.730 59100 0.42 1.44 15300 10900 1.40 70200 02475 02420-B
1.2500 2.6875 0.3437 13300 3440 2450 15800
31.750 68.262 8.730 59100 0.42 1.44 15300 10900 1.40 70200 02476 02420-B
1.2500 2.6875 0.3437 13300 3440 2450 15800
31.750 69.012 7.932 50600 0.38 1.57 13100 8570 1.53 61700 14125A 14276-B
1.2500 2.7170 0.3123 11400 2950 1930 13900
31.750 69.850 8.733 77500 0.27 2.19 20100 9410 2.14 94400 2580 2523-B
1.2500 2.7500 0.3438 17400 4520 2120 21200
31.750 69.850 8.733 77500 0.27 2.19 20100 9410 2.14 94400 2582 2523-B
1.2500 2.7500 0.3438 17400 4520 2120 21200
31.750 72.626 11.112 87700 0.33 1.80 22700 13000 1.76 102000 3188 3120-B
1.2500 2.8593 0.4375 19700 5110 2910 22800
31.750 72.626 11.112 87700 0.33 1.80 22700 13000 1.76 102000 3193 3120-B
1.2500 2.8593 0.4375 19700 5110 2910 22800
31.750 72.626 11.112 87700 0.33 1.80 22700 13000 1.76 102000 3199 3120-B
1.2500 2.8593 0.4375 19700 5110 2910 22800
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
B
Caption:
Caption:
C 2
C
d B
D 1
D
R
d b D a
d a
•
B200 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
18.923 15.875 -4.1 75.857 3.962 1.5 36.0 38.0 66.0 16.1 10.1 0.0630 0.40
0.7450 0.6250 -0.16 2.9865 0.1560 0.06 1.42 1.50 2.60
0.88
19.583 15.875 -4.3 72.873 3.962 3.5 40.0 43.0 65.0 18 9.4 0.0668 0.37
0.7710 0.6250 -0.17 2.8690 0.1560 0.14 1.57 1.69 2.56
0.82
19.202 15.875 -4.3 72.873 3.962 0.8 36.5 37.0 65.0 18 9.4 0.0668 0.37
0.7560 0.6250 -0.17 2.8690 0.1560 0.03 1.44 1.46 2.56
0.82
18.923 15.875 -4.1 75.857 3.962 1.5 36.0 38.0 66.0 16.1 10.1 0.0630 0.40
0.7450 0.6250 -0.16 2.9865 0.1560 0.06 1.42 1.50 2.60
0.88
29.997 23.812 -10.2 77.300 4.762 3.5 38.0 44.5 69.0 23.4 8.76 0.0697 0.62
1.1810 0.9375 -0.40 3.0433 0.1875 0.14 1.50 1.75 2.72
1.37
16.566 14.288 -3.6 65.862 3.556 1.5 34.5 37.0 59.0 11.8 7.49 0.0579 0.24
0.6522 0.5625 -0.14 2.5930 0.1400 0.06 1.36 1.46 2.32
0.53
21.433 16.670 -3.3 70.000 4.000 1.5 38.0 41.0 63.0 16.8 9.36 0.0736 0.36
0.8438 0.6563 -0.13 2.7559 0.1575 0.06 1.50 1.61 2.48
0.79
25.357 19.050 -8.6 73.711 3.962 2.3 36.5 40.0 66.0 23.6 9.63 0.0656 0.48
0.9983 0.7500 -0.34 2.9020 0.1560 0.09 1.44 1.57 2.60
1.05
29.997 23.812 -10.2 77.300 4.762 0.8 38.5 39.0 69.0 23.4 8.76 0.0697 0.63
1.1810 0.9375 -0.40 3.0433 0.1875 0.03 1.52 1.54 2.72
1.38
29.997 23.812 -10.2 77.300 4.762 3.5 38.5 44.5 69.0 23.4 8.76 0.0697 0.62
1.1810 0.9375 -0.40 3.0433 0.1875 0.14 1.52 1.75 2.72
1.37
29.771 23.812 -8.6 84.049 4.762 0.8 40.0 41.0 76.0 29.9 11.2 0.0781 0.79
1.1721 0.9375 -0.34 3.3090 0.1875 0.03 1.57 1.61 2.99
1.73
22.403 17.826 -6.4 84.658 4.762 0.8 38.0 39.0 77.0 26.5 13 0.0676 0.60
0.8820 0.7018 -0.25 3.3330 0.1875 0.03 1.50 1.54 3.03
1.32
20.940 15.875 -4.8 83.858 3.970 1.5 37.5 40.0 73.0 20.7 12.5 0.0709 0.55
0.8244 0.6250 -0.19 3.3015 0.1563 0.06 1.48 1.57 2.87
1.21
20.638 15.875 -5.8 67.366 3.967 3.5 35.5 41.5 60.0 14.6 7.58 0.0606 0.31
0.8125 0.6250 -0.23 2.6522 0.1562 0.14 1.40 1.63 2.36
0.67
15.080 10.716 -1.3 62.598 2.769 1.0 36.0 37.5 57.0 10.7 10.6 0.0601 0.17
0.5937 0.4219 -0.05 2.4645 0.1090 0.04 1.42 1.48 2.24
0.38
16.764 11.811 -3.0 61.773 2.769 3.5 36.0 42.5 57.0 12.8 9.93 0.0612 0.18
0.6600 0.4650 -0.12 2.4320 0.1090 0.14 1.42 1.67 2.24
0.40
16.764 11.811 -3.0 61.912 2.769 2.3 36.0 40.0 57.0 12.8 9.93 0.0612 0.19
0.6600 0.4650 -0.12 2.4375 0.1090 0.09 1.42 1.57 2.24
0.41
16.764 11.811 -3.0 61.912 2.769 3.5 36.0 42.5 57.0 12.8 9.93 0.0612 0.18
0.6600 0.4650 -0.12 2.4375 0.1090 0.14 1.42 1.67 2.24
0.39
19.050 15.875 -4.8 67.366 3.967 0.0 36.5 42.5 60.0 14.6 7.58 0.0606 0.28
0.7500 0.6250 -0.19 2.6522 0.1562 0.00 1.44 1.67 2.36
0.62
20.638 15.875 -5.8 67.366 3.967 3.5 36.5 42.5 60.0 14.6 7.58 0.0606 0.29
0.8125 0.6250 -0.23 2.6522 0.1562 0.14 1.44 1.67 2.36
0.65
22.225 17.462 -5.1 72.128 3.967 3.5 38.5 44.5 65.0 17.5 8.48 0.0681 0.43
0.8750 0.6875 -0.20 2.8397 0.1562 0.14 1.52 1.75 2.56
0.94
22.225 17.462 -5.1 72.128 3.967 0.8 38.5 39.0 65.0 17.5 8.48 0.0681 0.43
0.8750 0.6875 -0.20 2.8397 0.1562 0.03 1.52 1.54 2.56
0.95
19.583 15.875 -4.3 72.873 3.962 3.5 38.5 44.5 65.0 18 9.4 0.0668 0.36
0.7710 0.6250 -0.17 2.8690 0.1560 0.14 1.52 1.75 2.56
0.79
25.357 19.050 -8.6 73.711 3.962 0.8 37.5 38.5 66.0 23.6 9.63 0.0656 0.47
0.9983 0.7500 -0.34 2.9020 0.1560 0.03 1.48 1.52 2.60
1.03
25.357 19.050 -8.6 73.711 3.962 3.5 37.5 44.0 66.0 23.6 9.63 0.0656 0.46
0.9983 0.7500 -0.34 2.9020 0.1560 0.14 1.48 1.73 2.60
1.01
29.997 23.812 -10.2 77.300 4.762 0.8 39.5 40.0 69.0 23.4 8.76 0.0697 0.61
1.1810 0.9375 -0.40 3.0433 0.1875 0.03 1.56 1.57 2.72
1.34
29.997 23.812 -10.2 77.300 4.762 3.5 39.5 45.5 69.0 23.4 8.76 0.0697 0.60
1.1810 0.9375 -0.40 3.0433 0.1875 0.14 1.56 1.79 2.72
1.33
29.997 23.812 -10.2 77.300 4.762 2.3 39.5 43.0 69.0 23.4 8.76 0.0697 0.61
1.1810 0.9375 -0.40 3.0433 0.1875 0.09 1.56 1.69 2.72
1.34
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B201
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF
SINGLE-ROW
T 1
a
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
31.750 79.375 10.320 96900 0.37 1.64 25100 15700 1.60 119000 3476 3420-B
1.2500 3.1250 0.4063 21800 5650 3530 26800
31.750 80.000 7.938 73600 0.27 2.20 19100 8920 2.14 83400 346 332-B
1.2500 3.1496 0.3125 16600 4290 2010 18700
32.004 72.000 7.087 54400 0.36 1.67 14100 8700 1.62 60100 26126 26283-B
1.2600 2.8346 0.2790 12200 3170 1960 13500
33.338 69.012 7.938 50600 0.38 1.57 13100 8570 1.53 61700 14130 14276-B
1.3125 2.7170 0.3125 11400 2950 1930 13900
33.338 69.012 7.938 50600 0.38 1.57 13100 8570 1.53 61700 14131 14276-B
1.3125 2.7170 0.3125 11400 2950 1930 13900
33.338 69.850 8.725 77500 0.27 2.19 20100 9410 2.14 94400 2581 2523-B
1.3125 2.7500 0.3435 17400 4520 2120 21200
33.338 69.850 8.733 77500 0.27 2.19 20100 9410 2.14 94400 2585 2523-B
1.3125 2.7500 0.3438 17400 4520 2120 21200
33.338 72.000 7.087 54400 0.36 1.67 14100 8700 1.62 60100 26131 26283-B
1.3125 2.8346 0.2790 12200 3170 1960 13500
33.338 72.000 7.087 54400 0.36 1.67 14100 8700 1.62 60100 26132 26283-B
1.3125 2.8346 0.2790 12200 3170 1960 13500
33.338 72.238 8.733 52400 0.40 1.49 13600 9350 1.45 65800 16131 16284-B
1.3125 2.8440 0.3438 11800 3060 2100 14800
33.338 72.626 11.112 87700 0.33 1.80 22700 13000 1.76 102000 3196 3120-B
1.3125 2.8593 0.4375 19700 5110 2910 22800
33.338 72.626 11.112 87700 0.33 1.80 22700 13000 1.76 102000 3197 3120-B
1.3125 2.8593 0.4375 19700 5110 2910 22800
33.338 76.200 11.112 86200 0.55 1.10 22400 20900 1.07 119000 HM89443 HM89410-B
1.3125 3.0000 0.4375 19400 5030 4700 26700
33.338 79.375 10.320 96900 0.37 1.64 25100 15700 1.60 119000 3477 3420-B
1.3125 3.1250 0.4063 21800 5650 3530 26800
33.338 79.375 10.320 96900 0.37 1.64 25100 15700 1.60 119000 3483 3420-B
1.3125 3.1250 0.4063 21800 5650 3530 26800
33.338 80.000 7.938 73600 0.27 2.20 19100 8920 2.14 83400 335-S 332-B
1.3125 3.1496 0.3125 16600 4290 2010 18700
34.925 69.012 7.938 50600 0.38 1.57 13100 8570 1.53 61700 14137A 14276-B
1.3750 2.7170 0.3125 11400 2950 1930 13900
34.925 69.012 7.938 50600 0.38 1.57 13100 8570 1.53 61700 14138A 14276-B
1.3750 2.7170 0.3125 11400 2950 1930 13900
34.925 72.238 8.733 52400 0.40 1.49 13600 9350 1.45 65800 16137 16284-B
1.3750 2.8440 0.3438 11800 3060 2100 14800
34.925 76.200 10.320 87700 0.40 1.49 22700 15600 1.45 107000 31593 31520-B
1.3750 3.0000 0.4063 19700 5110 3520 24100
34.925 76.200 11.112 80400 0.30 1.98 20800 10800 1.93 102000 2786 2720-B
1.3750 3.0000 0.4375 18100 4690 2430 23000
34.925 76.200 11.112 80400 0.30 1.98 20800 10800 1.93 102000 2793 2720-B
1.3750 3.0000 0.4375 18100 4690 2430 23000
34.925 76.200 11.112 80400 0.30 1.98 20800 10800 1.93 102000 2796 2720-B
1.3750 3.0000 0.4375 18100 4690 2430 23000
34.925 76.200 11.112 86200 0.55 1.10 22400 20900 1.07 119000 HM89446 HM89410-B
1.3750 3.0000 0.4375 19400 5030 4700 26700
34.925 79.375 10.320 96900 0.37 1.64 25100 15700 1.60 119000 3478 3420-B
1.3750 3.1250 0.4063 21800 5650 3530 26800
34.925 79.375 10.320 96900 0.37 1.64 25100 15700 1.60 119000 3482 3420-B
1.3750 3.1250 0.4063 21800 5650 3530 26800
34.925 80.000 7.938 73600 0.27 2.20 19100 8920 2.14 83400 335 332-B
1.3750 3.1496 0.3125 16600 4290 2010 18700
34.925 80.000 7.938 73600 0.27 2.20 19100 8920 2.14 83400 343 332-B
1.3750 3.1496 0.3125 16600 4290 2010 18700
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
B
Caption:
Caption:
C 2
C
d B
D 1
D
R
d b D a
d a
•
B202 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
29.771 23.812 -8.6 84.049 4.762 1.3 41.0 43.0 76.0 29.9 11.2 0.0781 0.77
1.1721 0.9375 -0.34 3.3090 0.1875 0.05 1.61 1.69 2.99
1.69
22.403 17.826 -6.4 84.658 4.762 0.8 39.5 40.0 77.0 26.5 13 0.0676 0.58
0.8820 0.7018 -0.25 3.3330 0.1875 0.03 1.56 1.57 3.03
1.29
18.923 15.875 -4.1 75.857 3.962 1.5 37.5 39.5 66.0 16.1 10.1 0.0630 0.38
0.7450 0.6250 -0.16 2.9865 0.1560 0.06 1.48 1.56 2.60
0.85
19.583 15.875 -4.3 72.873 3.962 3.5 39.5 46.0 65.0 18 9.4 0.0668 0.35
0.7710 0.6250 -0.17 2.8690 0.1560 0.14 1.56 1.81 2.56
0.77
19.583 15.875 -4.3 72.873 3.962 0.8 39.5 40.5 65.0 18 9.4 0.0668 0.35
0.7710 0.6250 -0.17 2.8690 0.1560 0.03 1.56 1.59 2.56
0.77
25.357 19.050 -8.6 73.711 3.962 0.8 39.0 39.5 66.0 23.6 9.63 0.0656 0.45
0.9983 0.7500 -0.34 2.9020 0.1560 0.03 1.54 1.56 2.60
0.99
25.357 19.050 -8.6 73.711 3.962 3.5 39.0 45.0 66.0 23.6 9.63 0.0656 0.44
0.9983 0.7500 -0.34 2.9020 0.1560 0.14 1.54 1.77 2.60
0.98
18.923 15.875 -4.1 75.857 3.962 3.5 38.5 44.5 66.0 16.1 10.1 0.0630 0.37
0.7450 0.6250 -0.16 2.9865 0.1560 0.14 1.52 1.75 2.60
0.81
18.923 15.875 -4.1 75.857 3.962 1.5 38.5 40.5 66.0 16.1 10.1 0.0630 0.37
0.7450 0.6250 -0.16 2.9865 0.1560 0.06 1.52 1.59 2.60
0.82
20.638 15.875 -4.1 76.098 3.970 3.5 39.5 46.0 69.0 20.3 10.6 0.0707 0.41
0.8125 0.6250 -0.16 2.9960 0.1563 0.14 1.56 1.81 2.72
0.91
29.997 23.812 -10.2 77.300 4.762 3.5 40.5 47.0 69.0 23.4 8.76 0.0697 0.58
1.1810 0.9375 -0.40 3.0433 0.1875 0.14 1.59 1.85 2.72
1.29
29.997 23.812 -10.2 77.300 4.762 0.8 40.5 41.5 69.0 23.4 8.76 0.0697 0.59
1.1810 0.9375 -0.40 3.0433 0.1875 0.03 1.59 1.63 2.72
1.30
28.575 23.020 -5.6 80.863 4.762 0.8 44.5 46.5 75.0 28.9 13.1 0.0883 0.68
1.1250 0.9063 -0.22 3.1836 0.1875 0.03 1.75 1.83 2.95
1.49
29.771 23.812 -8.6 84.049 4.762 3.5 42.5 49.0 76.0 29.9 11.2 0.0781 0.74
1.1721 0.9375 -0.34 3.3090 0.1875 0.14 1.67 1.93 2.99
1.64
29.771 23.812 -8.6 84.049 4.762 0.8 42.5 43.0 76.0 29.9 11.2 0.0781 0.75
1.1721 0.9375 -0.34 3.3090 0.1875 0.03 1.67 1.69 2.99
1.65
22.403 17.826 -6.4 84.658 4.762 0.8 40.5 41.0 77.0 26.5 13 0.0676 0.57
0.8820 0.7018 -0.25 3.3330 0.1875 0.03 1.59 1.61 3.03
1.26
19.583 15.875 -4.3 72.873 3.962 1.5 41.0 43.0 65.0 18 9.4 0.0668 0.34
0.7710 0.6250 -0.17 2.8690 0.1560 0.06 1.61 1.69 2.56
0.74
19.583 15.875 -4.3 72.873 3.962 3.5 41.0 47.0 65.0 18 9.4 0.0668 0.34
0.7710 0.6250 -0.17 2.8690 0.1560 0.14 1.61 1.85 2.56
0.74
20.638 15.875 -4.1 76.098 3.970 3.5 40.5 47.0 69.0 20.3 10.6 0.0707 0.40
0.8125 0.6250 -0.16 2.9960 0.1563 0.14 1.59 1.85 2.72
0.88
28.575 23.812 -7.6 80.863 4.762 3.5 43.5 50.0 74.0 26.3 9.08 0.0773 0.64
1.1250 0.9375 -0.30 3.1836 0.1875 0.14 1.71 1.97 2.91
1.42
25.654 19.050 -8.1 82.550 6.350 5.0 41.0 51.0 73.0 28.7 12.2 0.0725 0.57
1.0100 0.7500 -0.32 3.2500 0.2500 0.20 1.61 2.01 2.87
1.26
25.654 19.050 -8.1 82.550 6.350 0.8 41.0 42.0 73.0 28.7 12.2 0.0725 0.59
1.0100 0.7500 -0.32 3.2500 0.2500 0.03 1.61 1.65 2.87
1.29
25.654 19.050 -8.1 82.550 6.350 3.5 41.0 47.5 73.0 28.7 12.2 0.0725 0.58
1.0100 0.7500 -0.32 3.2500 0.2500 0.14 1.61 1.87 2.87
1.28
28.575 23.020 -5.6 80.863 4.762 3.5 44.5 56.0 75.0 28.9 13.1 0.0883 0.66
1.1250 0.9063 -0.22 3.1836 0.1875 0.14 1.75 2.20 2.95
1.45
29.771 23.812 -8.6 84.049 4.762 3.5 43.5 50.0 76.0 29.9 11.2 0.0781 0.72
1.1721 0.9375 -0.34 3.3090 0.1875 0.14 1.71 1.97 2.99
1.60
29.771 23.812 -8.6 84.049 4.762 0.8 43.5 44.0 76.0 29.9 11.2 0.0781 0.73
1.1721 0.9375 -0.34 3.3090 0.1875 0.03 1.71 1.73 2.99
1.61
22.403 17.826 -6.4 84.658 4.762 0.8 41.5 42.5 77.0 26.5 13 0.0676 0.55
0.8820 0.7018 -0.25 3.3330 0.1875 0.03 1.63 1.67 3.03
1.22
22.403 17.826 -6.4 84.658 4.762 3.5 41.5 48.0 77.0 26.5 13 0.0676 0.55
0.8820 0.7018 -0.25 3.3330 0.1875 0.14 1.63 1.89 3.03
1.21
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B203
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF
SINGLE-ROW
T 1
a
B204 TIMKEN PRODUCTS CATALOG
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
34.925 80.000 9.100 58800 0.40 1.49 15200 10500 1.45 68900 28137 28315-B
1.3750 3.1496 0.3583 13200 3430 2360 15500
34.925 80.167 10.320 106000 0.27 2.20 27600 12900 2.14 129000 3379 3320-B
1.3750 3.1562 0.4063 23900 6200 2900 29100
34.925 81.755 10.320 106000 0.27 2.20 27600 12900 2.14 129000 3379 3329-B
1.3750 3.2187 0.4063 23900 6200 2900 29100
34.925 87.312 11.112 105000 0.31 1.96 27200 14300 1.91 134000 3581 3525-B
1.3750 3.4375 0.4375 23600 6120 3210 30100
34.925 92.075 11.115 118000 0.28 2.11 30500 14800 2.05 144000 449 432AB
1.3750 3.6250 0.4376 26400 6850 3330 32400
34.925 95.250 11.115 118000 0.28 2.11 30500 14800 2.05 144000 449 432-B
1.3750 3.7500 0.4376 26400 6850 3330 32400
34.975 69.012 7.932 50600 0.38 1.57 13100 8570 1.53 61700 14139 14276-B
1.3770 2.7170 0.3123 11400 2950 1930 13900
34.976 72.000 6.287 46900 0.44 1.35 12200 9260 1.31 57800 19138 19283-B
1.3770 2.8346 0.2475 10600 2740 2080 13000
34.975 80.000 9.100 58800 0.40 1.49 15200 10500 1.45 68900 28138 28315-B
1.3770 3.1496 0.3583 13200 3430 2360 15500
35.000 68.262 7.539 46900 0.44 1.35 12200 9260 1.31 57800 19138X 19268-B
1.3780 2.6875 0.2968 10600 2740 2080 13000
35.000 72.000 6.287 46900 0.44 1.35 12200 9260 1.31 57800 19138X 19283-B
1.3780 2.8346 0.2475 10600 2740 2080 13000
35.000 79.375 10.320 96900 0.37 1.64 25100 15700 1.60 119000 3480 3420-B
1.3780 3.1250 0.4063 21800 5650 3530 26800
35.000 80.000 7.938 73600 0.27 2.20 19100 8920 2.14 83400 339 332-B
1.3780 3.1496 0.3125 16600 4290 2010 18700
35.000 92.075 11.115 118000 0.28 2.11 30500 14800 2.05 144000 441 432AB
1.3780 3.6250 0.4376 26400 6850 3330 32400
35.000 95.250 11.115 118000 0.28 2.11 30500 14800 2.05 144000 441 432-B
1.3780 3.7500 0.4376 26400 6850 3330 32400
36.512 68.262 7.539 46900 0.44 1.35 12200 9260 1.31 57800 19143 19268-B
1.4375 2.6875 0.2968 10600 2740 2080 13000
36.512 72.000 6.287 46900 0.44 1.35 12200 9260 1.31 57800 19143 19283-B
1.4375 2.8346 0.2475 10600 2740 2080 13000
36.512 72.238 8.733 52400 0.40 1.49 13600 9350 1.45 65800 16143 16284-B
1.4375 2.8440 0.3438 11800 3060 2100 14800
36.512 76.200 11.112 86200 0.55 1.10 22400 20900 1.07 119000 HM89448 HM89410-B
1.4375 3.0000 0.4375 19400 5030 4700 26700
36.512 76.200 11.112 86200 0.55 1.10 22400 20900 1.07 119000 HM89449 HM89410-B
1.4375 3.0000 0.4375 19400 5030 4700 26700
36.512 79.375 10.320 96900 0.37 1.64 25100 15700 1.60 119000 3479 3420-B
1.4375 3.1250 0.4063 21800 5650 3530 26800
36.512 88.500 13.492 77900 0.78 0.77 20200 27000 0.75 88600 44143 44348-B
1.4375 3.4843 0.5312 17500 4540 6070 19900
38.100 65.088 5.944 25100 0.35 1.73 6520 3860 1.69 33000 13889 13836-B
1.5000 2.5625 0.2340 5650 1470 869 7430
38.100 68.262 7.539 46900 0.44 1.35 12200 9260 1.31 57800 19150 19268-B
1.5000 2.6875 0.2968 10600 2740 2080 13000
38.100 72.000 6.287 46900 0.44 1.35 12200 9260 1.31 57800 19150 19283-B
1.5000 2.8346 0.2475 10600 2740 2080 13000
38.100 72.238 8.733 52400 0.40 1.49 13600 9350 1.45 65800 16150 16284-B
1.5000 2.8440 0.3438 11800 3060 2100 14800
38.100 76.200 11.112 80400 0.30 1.98 20800 10800 1.93 102000 2788 2720-B
1.5000 3.0000 0.4375 18100 4690 2430 23000
38.100 79.375 10.320 96900 0.37 1.64 25100 15700 1.60 119000 3490 3420-B
1.5000 3.1250 0.4063 21800 5650 3530 26800
Caption:
B
Caption:
C 2
C
d B
D 1
D
R
d b D a
•
d a
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
Tapered - Type TSF
Dimensions, mm (inches)
Factors
Weight
Bearing Shaft
Housing
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
20.940 15.875 -4.8 83.858 3.970 1.5 41.0 43.5 73.0 20.7 12.5 0.0709 0.51
0.8244 0.6250 -0.19 3.3015 0.1563 0.06 1.61 1.71 2.87
1.12
30.391 23.812 -10.9 84.826 4.762 3.5 41.5 48.0 77.0 34.6 12.1 0.0744 0.78
1.1965 0.9375 -0.43 3.3396 0.1875 0.14 1.63 1.89 3.03
1.72
30.391 23.812 -10.9 86.413 4.762 3.5 41.5 48.0 77.0 34.6 12.1 0.0744 0.79
1.1965 0.9375 -0.43 3.4021 0.1875 0.14 1.63 1.89 3.03
1.75
30.886 23.812 -10.2 91.986 4.750 3.5 43.0 49.5 82.0 39.5 10.5 0.0808 0.94
1.2160 0.9375 -0.40 3.6215 0.1870 0.14 1.69 1.95 3.23
2.07
29.900 22.225 -9.1 97.536 5.558 0.8 43.5 44.0 87.0 42.5 11.3 0.0805 1.04
1.1772 0.8750 -0.36 3.8400 0.2188 0.03 1.71 1.73 3.43
2.28
29.900 22.225 -9.1 100.686 5.558 0.8 43.5 44.0 87.0 42.5 11.3 0.0805 1.12
1.1772 0.8750 -0.36 3.9640 0.2188 0.03 1.71 1.73 3.43
2.47
19.583 15.875 -4.3 72.873 3.962 1.3 41.0 42.5 65.0 18 9.4 0.0668 0.34
0.7710 0.6250 -0.17 2.8690 0.1560 0.05 1.61 1.67 2.56
0.74
16.520 14.288 -1.5 75.857 3.556 1.5 40.5 42.5 68.0 17.5 11.5 0.0694 0.33
0.6504 0.5625 -0.06 2.9865 0.1400 0.06 1.59 1.67 2.68
0.73
20.940 15.875 -4.8 83.858 3.970 1.5 41.0 43.5 73.0 20.7 12.5 0.0709 0.51
0.8244 0.6250 -0.19 3.3015 0.1563 0.06 1.61 1.71 2.87
1.12
16.520 11.908 -1.5 72.128 3.571 2.0 40.5 43.5 67.0 17.5 11.5 0.0694 0.27
0.6504 0.4688 -0.06 2.8397 0.1406 0.08 1.59 1.71 2.64
0.60
16.520 14.288 -1.5 75.857 3.556 2.0 40.5 43.5 68.0 17.5 11.5 0.0694 0.33
0.6504 0.5625 -0.06 2.9865 0.1400 0.08 1.59 1.71 2.68
0.73
29.771 23.812 -8.6 84.049 4.762 1.5 43.5 46.0 76.0 29.9 11.2 0.0781 0.73
1.1721 0.9375 -0.34 3.3090 0.1875 0.06 1.71 1.81 2.99
1.60
22.403 17.826 -6.4 84.658 4.762 0.8 41.5 42.5 77.0 26.5 13 0.0676 0.55
0.8820 0.7018 -0.25 3.3330 0.1875 0.03 1.63 1.67 3.03
1.22
29.900 22.225 -9.1 97.536 5.558 3.5 43.5 50.0 87.0 42.5 11.3 0.0805 1.03
1.1772 0.8750 -0.36 3.8400 0.2188 0.14 1.71 1.97 3.43
2.27
29.900 22.225 -9.1 100.686 5.558 3.5 43.5 50.0 87.0 42.5 11.3 0.0805 1.11
1.1772 0.8750 -0.36 3.9640 0.2188 0.14 1.71 1.97 3.43
2.45
16.520 11.908 -1.5 72.128 3.571 1.5 41.5 44.0 67.0 17.5 11.5 0.0694 0.26
0.6504 0.4688 -0.06 2.8397 0.1406 0.06 1.63 1.73 2.64
0.58
16.520 14.288 -1.5 75.857 3.556 1.5 41.5 44.0 68.0 17.5 11.5 0.0694 0.32
0.6504 0.5625 -0.06 2.9865 0.1400 0.06 1.63 1.73 2.68
0.71
20.638 15.875 -4.1 76.098 3.970 3.5 42.0 48.5 69.0 20.3 10.6 0.0707 0.38
0.8125 0.6250 -0.16 2.9960 0.1563 0.14 1.65 1.91 2.72
0.84
28.575 23.020 -5.6 80.863 4.762 0.8 44.5 48.5 75.0 28.9 13.1 0.0883 0.64
1.1250 0.9063 -0.22 3.1836 0.1875 0.03 1.75 1.91 2.95
1.41
28.575 23.020 -5.6 80.863 4.762 3.5 44.5 57.0 75.0 28.9 13.1 0.0883 0.64
1.1250 0.9063 -0.22 3.1836 0.1875 0.14 1.75 2.24 2.95
1.41
29.771 23.812 -8.6 84.049 4.762 0.8 44.5 45.5 76.0 29.9 11.2 0.0781 0.71
1.1721 0.9375 -0.34 3.3090 0.1875 0.03 1.75 1.79 2.99
1.56
23.698 17.462 2.3 93.937 5.555 2.3 50.0 54.0 86.0 22.9 8.71 0.0899 0.76
0.9330 0.6875 0.09 3.6983 0.2187 0.09 1.97 2.13 3.39
1.68
11.908 9.525 -0.8 68.161 2.769 1.5 42.5 45.0 63.0 14.8 23.3 0.0601 0.17
0.4688 0.3750 -0.03 2.6835 0.1090 0.06 1.67 1.77 2.48
0.37
16.520 11.908 -1.5 72.128 3.571 1.5 43.0 45.0 67.0 17.5 11.5 0.0694 0.25
0.6504 0.4688 -0.06 2.8397 0.1406 0.06 1.69 1.77 2.64
0.55
16.520 14.288 -1.5 75.857 3.556 1.5 43.0 45.0 68.0 17.5 11.5 0.0694 0.31
0.6504 0.5625 -0.06 2.9865 0.1400 0.06 1.69 1.77 2.68
0.68
20.638 15.875 -4.1 76.098 3.970 3.5 43.0 49.5 69.0 20.3 10.6 0.0707 0.37
0.8125 0.6250 -0.16 2.9960 0.1563 0.14 1.69 1.95 2.72
0.81
25.654 19.050 -8.1 82.550 6.350 3.5 43.5 50.0 73.0 28.7 12.2 0.0725 0.54
1.0100 0.7500 -0.32 3.2500 0.2500 0.14 1.71 1.97 2.87
1.20
29.771 23.812 -8.6 84.049 4.762 3.5 45.5 52.0 76.0 29.9 11.2 0.0781 0.68
1.1721 0.9375 -0.34 3.3090 0.1875 0.14 1.80 2.05 2.99
1.50
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
Continued on next page.
TIMKEN PRODUCTS CATALOG B205
•
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF SINGLE-ROW
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
38.100 80.000 7.938 73600 0.27 2.20 19100 8920 2.14 83400
347 332-B
28150 28315-B
28151 28315-B
3381 3320-B
3387 3320-B
3381 3329-B
3387 3329-B
3580 3525-B
3583 3525-B
44150 44348-B
440 432AB
444 432AB
440 432-B
444 432-B
542 532-B
13890 13836-B
3382 3320-B
3386 3320-B
3382 3329-B
3386 3329-B
44156 44348-B
44158 44348-B
620 612-B
344A 332-B
28158 28315-B
3879 3820-B
44157 44348-B
442-S 432AB
Caption:
1.5000 3.1496 0.3125 16600 4290 2010 18700
38.100 80.000 9.100 58800 0.40 1.49 15200 10500 1.45 68900
B
1.5000 3.1496 0.3583 13200 3430 2360 15500
38.100 80.000 9.100 58800 0.40 1.49 15200 10500 1.45 68900
1.5000 3.1496 0.3583 13200 3430 2360 15500
38.100 80.167 10.320 106000 0.27 2.20 27600 12900 2.14 129000
1.5000 3.1562 0.4063 23900 6200 2900 29100
38.100 80.167 10.320 106000 0.27 2.20 27600 12900 2.14 129000
1.5000 3.1562 0.4063 23900 6200 2900 29100
38.100 81.755 10.320 106000 0.27 2.20 27600 12900 2.14 129000
Caption:
1.5000 3.2187 0.4063 23900 6200 2900 29100
38.100 81.755 10.320 106000 0.27 2.20 27600 12900 2.14 129000
1.5000 3.2187 0.4063 23900 6200 2900 29100
38.100 87.312 11.112 105000 0.31 1.96 27200 14300 1.91 134000
1.5000 3.4375 0.4375 23600 6120 3210 30100
38.100 87.312 11.112 105000 0.31 1.96 27200 14300 1.91 134000
1.5000 3.4375 0.4375 23600 6120 3210 30100
38.100 88.500 13.492 77900 0.78 0.77 20200 27000 0.75 88600
T 1
C 2
C
1.5000 3.4843 0.5312 17500 4540 6070 19900
38.100 92.075 11.115 118000 0.28 2.11 30500 14800 2.05 144000
1.5000 3.6250 0.4376 26400 6850 3330 32400
38.100 92.075 11.115 118000 0.28 2.11 30500 14800 2.05 144000
D 1
D
1.5000 3.6250 0.4376 26400 6850 3330 32400
38.100 95.250 11.115 118000 0.28 2.11 30500 14800 2.05 144000
d B
1.5000 3.7500 0.4376 26400 6850 3330 32400
38.100 95.250 11.115 118000 0.28 2.11 30500 14800 2.05 144000
1.5000 3.7500 0.4376 26400 6850 3330 32400
38.100 111.125 14.288 159000 0.30 2.02 41300 21000 1.97 206000
a
1.5000 4.3750 0.5625 35800 9290 4720 46200
38.481 65.088 5.944 25100 0.35 1.73 6520 3860 1.69 33000
1.5150 2.5625 0.2340 5650 1470 869 7430
39.688 80.167 10.320 106000 0.27 2.20 27600 12900 2.14 129000
1.5625 3.1562 0.4063 23900 6200 2900 29100
39.688 80.167 10.320 106000 0.27 2.20 27600 12900 2.14 129000
1.5625 3.1562 0.4063 23900 6200 2900 29100
39.688 81.755 10.320 106000 0.27 2.20 27600 12900 2.14 129000
R
1.5625 3.2187 0.4063 23900 6200 2900 29100
39.688 81.755 10.320 106000 0.27 2.20 27600 12900 2.14 129000
d b D a
d a
1.5625 3.2187 0.4063 23900 6200 2900 29100
39.688 88.500 13.492 77900 0.78 0.77 20200 27000 0.75 88600
1.5625 3.4843 0.5312 17500 4540 6070 19900
39.688 88.500 13.492 77900 0.78 0.77 20200 27000 0.75 88600
1.5625 3.4843 0.5312 17500 4540 6070 19900
39.688 120.650 16.667 192000 0.31 1.91 49800 26800 1.86 244000
1.5625 4.7500 0.6562 43200 11200 6020 54800
40.000 80.000 7.938 73600 0.27 2.20 19100 8920 2.14 83400
1.5748 3.1496 0.3125 16600 4290 2010 18700
40.000 80.000 9.100 58800 0.40 1.49 15200 10500 1.45 68900
1.5748 3.1496 0.3583 13200 3430 2360 15500
40.000 85.725 11.112 115000 0.40 1.49 29800 20500 1.45 148000
1.5748 3.3750 0.4375 25900 6710 4610 33200
40.000 88.500 13.492 77900 0.78 0.77 20200 27000 0.75 88600
1.5748 3.4843 0.5312 17500 4540 6070 19900
40.000 92.075 11.115 118000 0.28 2.11 30500 14800 2.05 144000
1.5748 3.6250 0.4376 26400 6850 3330 32400
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
•
B206 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
22.403 17.826 -6.4 84.658 4.762 3.5 44.0 50.0 77.0 26.5 13 0.0676 0.52
0.8820 0.7018 -0.25 3.3330 0.1875 0.14 1.73 1.97 3.03
1.14
20.940 15.875 -4.8 83.858 3.970 1.5 43.5 45.5 73.0 20.7 12.5 0.0709 0.48
0.8244 0.6250 -0.19 3.3015 0.1563 0.06 1.71 1.79 2.87
1.05
20.940 15.875 -4.8 83.858 3.970 3.5 43.5 50.0 73.0 20.7 12.5 0.0709 0.47
0.8244 0.6250 -0.19 3.3015 0.1563 0.14 1.71 1.97 2.87
1.04
30.391 23.812 -10.9 84.826 4.762 3.5 44.5 51.0 77.0 34.6 12.1 0.0744 0.73
1.1965 0.9375 -0.43 3.3396 0.1875 0.14 1.75 2.01 3.03
1.62
30.391 23.812 -10.9 84.826 4.762 0.8 44.5 45.0 77.0 34.6 12.1 0.0744 0.74
1.1965 0.9375 -0.43 3.3396 0.1875 0.03 1.75 1.77 3.03
1.63
30.391 23.812 -10.9 86.413 4.762 3.5 44.5 51.0 77.0 34.6 12.1 0.0744 0.75
1.1965 0.9375 -0.43 3.4021 0.1875 0.14 1.75 2.01 3.03
1.65
30.391 23.812 -10.9 86.413 4.762 0.8 44.5 45.0 77.0 34.6 12.1 0.0744 0.76
1.1965 0.9375 -0.43 3.4021 0.1875 0.03 1.75 1.77 3.03
1.67
30.886 23.812 -10.2 91.986 4.750 1.5 45.5 48.0 82.0 39.5 10.5 0.0808 0.90
1.2160 0.9375 -0.40 3.6215 0.1870 0.06 1.79 1.89 3.23
1.98
30.886 23.812 -10.2 91.986 4.750 3.5 45.5 52.0 82.0 39.5 10.5 0.0808 0.89
1.2160 0.9375 -0.40 3.6215 0.1870 0.14 1.79 2.05 3.23
1.97
23.698 17.462 2.3 93.937 5.555 2.3 51.0 55.0 86.0 22.9 8.71 0.0899 0.74
0.9330 0.6875 0.09 3.6983 0.2187 0.09 2.00 2.17 3.39
1.64
29.900 22.225 -9.1 97.536 5.558 0.8 45.5 46.5 87.0 42.5 11.3 0.0805 0.99
1.1772 0.8750 -0.36 3.8400 0.2188 0.03 1.79 1.83 3.43
2.19
29.900 22.225 -9.1 97.536 5.558 3.5 45.5 52.0 87.0 42.5 11.3 0.0805 0.99
1.1772 0.8750 -0.36 3.8400 0.2188 0.14 1.79 2.05 3.43
2.18
29.900 22.225 -9.1 100.686 5.558 0.8 45.5 46.5 87.0 42.5 11.3 0.0805 1.08
1.1772 0.8750 -0.36 3.9640 0.2188 0.03 1.79 1.83 3.43
2.37
29.900 22.225 -9.1 100.686 5.558 3.5 45.5 52.0 87.0 42.5 11.3 0.0805 1.07
1.1772 0.8750 -0.36 3.9640 0.2188 0.14 1.79 2.05 3.43
2.36
36.957 30.162 -12.2 117.373 6.350 3.5 49.0 55.0 100.0 64.3 16.1 0.0938 2.01
1.4550 1.1875 -0.48 4.6210 0.2500 0.14 1.93 2.17 3.94
4.43
11.908 9.525 -0.8 68.161 2.769 0.4 43.0 43.0 63.0 14.8 23.3 0.0601 0.16
0.4688 0.3750 -0.03 2.6835 0.1090 0.02 1.69 1.69 2.48
0.36
30.391 23.812 -10.9 84.826 4.762 3.5 45.5 52.0 77.0 34.6 12.1 0.0744 0.71
1.1965 0.9375 -0.43 3.3396 0.1875 0.14 1.79 2.05 3.03
1.57
30.391 23.812 -10.9 84.826 4.762 0.8 45.5 46.5 77.0 34.6 12.1 0.0744 0.72
1.1965 0.9375 -0.43 3.3396 0.1875 0.03 1.79 1.83 3.03
1.58
30.391 23.812 -10.9 86.413 4.762 3.5 45.5 52.0 77.0 34.6 12.1 0.0744 0.73
1.1965 0.9375 -0.43 3.4021 0.1875 0.14 1.79 2.05 3.03
1.60
30.391 23.812 -10.9 86.413 4.762 0.8 45.5 46.5 77.0 34.6 12.1 0.0744 0.73
1.1965 0.9375 -0.43 3.4021 0.1875 0.03 1.79 1.83 3.03
1.61
23.698 17.462 2.3 93.937 5.555 2.3 51.0 56.0 86.0 22.9 8.71 0.0899 0.73
0.9330 0.6875 0.09 3.6983 0.2187 0.09 2.00 2.20 3.39
1.60
23.698 17.462 2.3 93.937 5.555 3.5 51.0 58.0 86.0 22.9 8.71 0.0899 0.72
0.9330 0.6875 0.09 3.6983 0.2187 0.14 2.00 2.28 3.39
1.59
41.275 31.750 -14.0 127.691 7.142 0.8 52.0 53.0 110.0 75.9 16.2 0.0694 2.60
1.6250 1.2500 -0.55 5.0272 0.2812 0.03 2.05 2.09 4.33
5.74
22.403 17.826 -6.4 84.658 4.762 0.8 45.5 46.0 77.0 26.5 13 0.0676 0.50
0.8820 0.7018 -0.25 3.3330 0.1875 0.03 1.79 1.81 3.03
1.11
20.940 15.875 -4.8 83.858 3.970 1.5 45.0 47.5 73.0 20.7 12.5 0.0709 0.46
0.8244 0.6250 -0.19 3.3015 0.1563 0.06 1.77 1.87 2.87
1.01
30.162 23.812 -8.1 89.586 4.762 0.8 50.0 51.0 83.0 37.8 13.5 0.0873 0.84
1.1875 0.9375 -0.32 3.5270 0.1875 0.03 1.97 2.01 3.27
1.86
23.698 17.462 2.3 93.937 5.555 2.3 51.0 56.0 86.0 22.9 8.71 0.0899 0.72
0.9330 0.6875 0.09 3.6983 0.2187 0.09 2.00 2.20 3.39
1.59
29.900 22.225 -9.1 97.536 5.558 3.5 47.0 54.0 87.0 42.5 11.3 0.0805 0.96
1.1772 0.8750 -0.36 3.8400 0.2188 0.14 1.85 2.13 3.43
2.12
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B207
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF
SINGLE-ROW
T 1
a
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
40.000 95.000 10.000 120000 0.41 1.45 31200 22100 1.41 166000 XGA33210 YSA33210R
1.5748 3.7402 0.3937 27000 7010 4960 37300
40.000 95.250 11.115 118000 0.28 2.11 30500 14800 2.05 144000 442-S 432-B
1.5748 3.7500 0.4376 26400 6850 3330 32400
41.275 76.200 7.292 44500 0.49 1.23 11500 9630 1.20 55100 11162 11300-B
1.6250 3.0000 0.2871 10000 2600 2170 12400
41.275 79.375 8.733 84300 0.32 1.88 21900 11900 1.83 110000 26882 26822-B
1.6250 3.1250 0.3438 19000 4920 2680 24800
41.275 80.000 7.938 73600 0.27 2.20 19100 8920 2.14 83400 336 332-B
1.6250 3.1496 0.3125 16600 4290 2010 18700
41.275 80.000 7.938 73600 0.27 2.20 19100 8920 2.14 83400 342 332-B
1.6250 3.1496 0.3125 16600 4290 2010 18700
41.275 80.167 10.320 106000 0.27 2.20 27600 12900 2.14 129000 3383 3320-B
1.6250 3.1562 0.4063 23900 6200 2900 29100
41.275 81.755 10.320 106000 0.27 2.20 27600 12900 2.14 129000 3383 3329-B
1.6250 3.2187 0.4063 23900 6200 2900 29100
41.275 85.725 11.112 115000 0.40 1.49 29800 20500 1.45 148000 3877 3820-B
1.6250 3.3750 0.4375 25900 6710 4610 33200
41.275 87.312 11.100 105000 0.31 1.96 27200 14300 1.91 134000 3585 3525-B
1.6250 3.4375 0.4370 23600 6120 3210 30100
41.275 87.312 11.112 105000 0.31 1.96 27200 14300 1.91 134000 3576 3525-B
1.6250 3.4375 0.4375 23600 6120 3210 30100
41.275 87.312 11.112 105000 0.31 1.96 27200 14300 1.91 134000 3577 3525-B
1.6250 3.4375 0.4375 23600 6120 3210 30100
41.275 88.500 13.492 77900 0.78 0.77 20200 27000 0.75 88600 44162 44348-B
1.6250 3.4843 0.5312 17500 4540 6070 19900
41.275 92.075 11.115 118000 0.28 2.11 30500 14800 2.05 144000 447 432AB
1.6250 3.6250 0.4376 26400 6850 3330 32400
41.275 95.250 11.115 118000 0.28 2.11 30500 14800 2.05 144000 447 432-B
1.6250 3.7500 0.4376 26400 6850 3330 32400
41.275 98.425 16.670 92800 0.74 0.81 24000 30500 0.79 104000 53162 53387-B
1.6250 3.8750 0.6563 20900 5410 6850 23400
42.850 107.950 11.112 126000 0.34 1.79 32600 18700 1.74 166000 461 453-B
1.6870 4.2500 0.4375 28200 7320 4200 37200
42.862 83.058 8.733 83800 0.33 1.79 21700 12500 1.74 111000 25576 25521-B
1.6875 3.2700 0.3438 18800 4880 2800 24900
42.862 85.000 9.525 86400 0.35 1.73 22400 13300 1.69 117000 2973 2924-B
1.6875 3.3465 0.3750 19400 5040 2980 26200
42.862 87.312 11.112 105000 0.31 1.96 27200 14300 1.91 134000 3579 3525-B
1.6875 3.4375 0.4375 23600 6120 3210 30100
42.875 80.000 7.938 73600 0.27 2.20 19100 8920 2.14 83400 342-S 332-B
1.6880 3.1496 0.3125 16600 4290 2010 18700
43.000 80.000 7.938 73600 0.27 2.20 19100 8920 2.14 83400 342X 332-B
1.6929 3.1496 0.3125 16600 4290 2010 18700
44.450 71.438 5.969 33400 0.31 1.97 8660 4530 1.91 43600 LL103049 LL103010-B
1.7500 2.8125 0.2350 7510 1950 1020 9790
44.450 73.025 6.350 52800 0.32 1.88 13700 7460 1.83 78300 L102849 L102810-B
1.7500 2.8750 0.2500 11900 3080 1680 17600
44.450 76.992 9.126 45900 0.51 1.19 11900 10300 1.15 58100 12175 12303-B
1.7500 3.0312 0.3593 10300 2670 2320 13100
44.450 79.375 7.539 48200 0.37 1.60 12500 7990 1.56 61300 18685 18620-B
1.7500 3.1250 0.2968 10800 2810 1800 13800
44.450 83.058 8.733 83800 0.33 1.79 21700 12500 1.74 111000 25580 25521-B
1.7500 3.2700 0.3438 18800 4880 2800 24900
44.450 85.000 7.938 75800 0.31 1.96 19600 10300 1.91 88800 355 354-B
1.7500 3.3465 0.3125 17000 4420 2320 20000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
B
Caption:
Caption:
C 2
C
d B
D 1
D
R
d b D a
d a
•
B208 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
32.000 27.000 -8.6 102.000 5.000 1.5 54.0 56.0 89.0 48.4 15.3 0.0957 1.23
1.2598 1.0630 -0.34 4.0157 0.1968 0.06 2.13 2.20 3.50
2.70
29.900 22.225 -9.1 100.686 5.558 3.5 47.0 54.0 87.0 42.5 11.3 0.0805 1.04
1.1772 0.8750 -0.36 3.9640 0.2188 0.14 1.85 2.13 3.43
2.30
17.384 14.288 -0.8 80.863 3.571 1.5 46.5 49.0 73.0 19.2 12.8 0.0735 0.36
0.6844 0.5625 -0.03 3.1836 0.1406 0.06 1.83 1.93 2.87
0.79
25.400 19.050 -7.4 83.241 3.970 3.5 47.0 54.0 76.0 32.8 13.3 0.0770 0.55
1.0000 0.7500 -0.29 3.2772 0.1563 0.14 1.85 2.13 2.99
1.21
22.403 17.826 -6.4 84.658 4.762 0.8 46.0 47.0 77.0 26.5 13 0.0676 0.49
0.8820 0.7018 -0.25 3.3330 0.1875 0.03 1.81 1.85 3.03
1.08
22.403 17.826 -6.4 84.658 4.762 3.5 46.0 53.0 77.0 26.5 13 0.0676 0.48
0.8820 0.7018 -0.25 3.3330 0.1875 0.14 1.81 2.09 3.03
1.06
30.391 23.812 -10.9 84.826 4.762 3.5 47.0 54.0 77.0 34.6 12.1 0.0744 0.69
1.1965 0.9375 -0.43 3.3396 0.1875 0.14 1.85 2.13 3.03
1.51
30.391 23.812 -10.9 86.413 4.762 3.5 47.0 54.0 77.0 34.6 12.1 0.0744 0.70
1.1965 0.9375 -0.43 3.4021 0.1875 0.14 1.85 2.13 3.03
1.55
30.162 23.812 -8.1 89.586 4.762 3.5 50.5 57.0 83.0 37.8 13.5 0.0873 0.82
1.1875 0.9375 -0.32 3.5270 0.1875 0.14 1.98 2.24 3.27
1.80
30.886 23.812 -10.2 91.986 4.750 1.5 48.0 50.0 82.0 39.5 10.5 0.0808 0.85
1.2160 0.9375 -0.40 3.6215 0.1870 0.06 1.89 1.97 3.23
1.88
30.886 23.812 -10.2 91.986 4.750 0.8 48.0 49.0 82.0 39.5 10.5 0.0808 0.85
1.2160 0.9375 -0.40 3.6215 0.1870 0.03 1.89 1.93 3.23
1.88
30.886 23.812 -10.2 91.986 4.750 3.5 48.0 54.0 82.0 39.5 10.5 0.0808 0.85
1.2160 0.9375 -0.40 3.6215 0.1870 0.14 1.89 2.13 3.23
1.87
23.698 17.462 2.3 93.937 5.555 2.3 51.0 57.0 86.0 22.9 8.71 0.0899 0.71
0.9330 0.6875 0.09 3.6983 0.2187 0.09 2.00 2.24 3.39
1.56
29.900 22.225 -9.1 97.536 5.558 3.5 48.5 55.0 87.0 42.5 11.3 0.0805 0.94
1.1772 0.8750 -0.36 3.8400 0.2188 0.14 1.91 2.17 3.43
2.07
29.900 22.225 -9.1 100.686 5.558 3.5 48.5 55.0 87.0 42.5 11.3 0.0805 1.02
1.1772 0.8750 -0.36 3.9640 0.2188 0.14 1.91 2.17 3.43
2.26
28.301 20.638 -0.3 104.673 6.350 1.5 52.5 57.0 92.0 26.7 9.63 0.0930 1.11
1.1142 0.8125 -0.01 4.1210 0.2500 0.06 2.07 2.24 3.62
2.44
29.317 22.225 -7.1 113.386 5.558 0.8 53.0 54.0 100.0 58.6 17.1 0.0946 1.40
1.1542 0.8750 -0.28 4.4640 0.2188 0.03 2.09 2.13 3.94
3.09
25.400 19.050 -6.4 86.919 3.970 3.5 49.0 55.0 80.0 35.2 14.3 0.0801 0.60
1.0000 0.7500 -0.25 3.4220 0.1563 0.14 1.93 2.17 3.15
1.32
25.608 20.638 -6.4 89.764 4.762 3.5 49.5 56.0 82.0 38.2 15.7 0.0832 0.69
1.0082 0.8125 -0.25 3.5340 0.1875 0.14 1.95 2.20 3.23
1.53
30.886 23.812 -10.2 91.986 4.750 3.5 49.5 56.0 82.0 39.5 10.5 0.0808 0.82
1.2160 0.9375 -0.40 3.6215 0.1870 0.14 1.95 2.20 3.23
1.81
22.403 17.826 -6.4 84.658 4.762 3.5 47.5 54.0 77.0 26.5 13 0.0676 0.46
0.8820 0.7018 -0.25 3.3330 0.1875 0.14 1.87 2.13 3.03
1.02
22.403 17.826 -6.1 84.658 4.762 3.5 48.0 55.0 77.0 26.5 13 0.0676 0.47
0.8820 0.7018 -0.24 3.3330 0.1875 0.14 1.89 2.17 3.03
1.03
12.700 9.525 -1.3 74.231 2.794 1.5 48.5 51.0 69.0 20 23.6 0.0637 0.19
0.5000 0.3750 -0.05 2.9225 0.1100 0.06 1.91 2.01 2.72
0.42
18.258 15.083 -3.8 76.200 3.175 1.5 49.0 51.0 71.0 30.6 23.7 0.0751 0.31
0.7188 0.5938 -0.15 3.0000 0.1250 0.06 1.93 2.01 2.80
0.68
17.145 11.908 0.0 80.564 3.571 1.5 49.5 52.0 75.0 21 15.8 0.0766 0.32
0.6750 0.4688 0.00 3.1718 0.1406 0.06 1.95 2.05 2.95
0.71
17.462 13.495 -2.0 84.038 3.571 2.8 49.5 54.0 77.0 23.9 17.7 0.0725 0.37
0.6875 0.5313 -0.08 3.3086 0.1406 0.11 1.95 2.13 3.03
0.81
25.400 19.050 -6.4 86.919 3.970 3.5 50.0 57.0 80.0 35.2 14.3 0.0801 0.58
1.0000 0.7500 -0.25 3.4220 0.1563 0.14 1.97 2.24 3.15
1.27
21.692 17.462 -4.8 89.659 4.762 2.3 50.0 54.0 82.0 30 12.2 0.0732 0.54
0.8540 0.6875 -0.19 3.5299 0.1875 0.09 1.97 2.13 3.23
1.20
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B209
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF
SINGLE-ROW
T 1
a
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
44.450 85.000 7.938 75800 0.31 1.96 19600 10300 1.91 88800 355X 354-B
1.7500 3.3465 0.3125 17000 4420 2320 20000
44.450 87.312 11.112 105000 0.31 1.96 27200 14300 1.91 134000 3578 3525-B
1.7500 3.4375 0.4375 23600 6120 3210 30100
44.450 92.075 11.115 118000 0.28 2.11 30500 14800 2.05 144000 435 432AB
1.7500 3.6250 0.4376 26400 6850 3330 32400
44.450 92.075 11.115 118000 0.28 2.11 30500 14800 2.05 144000 438 432AB
1.7500 3.6250 0.4376 26400 6850 3330 32400
44.450 95.250 11.115 118000 0.28 2.11 30500 14800 2.05 144000 435 432-B
1.7500 3.7500 0.4376 26400 6850 3330 32400
44.450 95.250 11.115 118000 0.28 2.11 30500 14800 2.05 144000 438 432-B
1.7500 3.7500 0.4376 26400 6850 3330 32400
44.450 98.425 16.670 92800 0.74 0.81 24000 30500 0.79 104000 53176 53387-B
1.7500 3.8750 0.6563 20900 5410 6850 23400
44.450 101.600 11.908 123000 0.40 1.50 31900 21900 1.46 155000 49576 49520-B
1.7500 4.0000 0.4688 27600 7160 4910 35000
44.450 107.950 11.115 126000 0.34 1.79 32600 18700 1.74 166000 460 453-B
1.7500 4.2500 0.4376 28200 7320 4200 37200
44.450 108.966 14.288 158000 0.40 1.49 41000 28200 1.45 202000 59175 59429-B
1.7500 4.2900 0.5625 35500 9210 6340 45400
44.450 120.650 16.574 192000 0.31 1.91 49800 26800 1.86 244000 615 612-B
1.7500 4.7500 0.6525 43200 11200 6020 54800
44.450 127.000 17.462 283000 0.30 2.01 73500 37500 1.96 370000 6277 6220-B
1.7500 5.0000 0.6875 63700 16500 8440 83300
44.983 83.058 8.733 83800 0.33 1.79 21700 12500 1.74 111000 25584 25521-B
1.7710 3.2700 0.3438 18800 4880 2800 24900
44.983 93.264 11.112 113000 0.34 1.77 29300 17000 1.73 153000 3776 3720-B
1.7710 3.6718 0.4375 25400 6590 3820 34300
45.000 75.000 8.000 61500 0.39 1.53 15900 10700 1.49 84300 X32009X Y32009XR
1.7717 2.9528 0.3150 13800 3580 2410 19000
45.000 80.000 10.000 88000 0.38 1.57 22800 15000 1.52 119000 X33109 Y33109R
1.7717 3.1496 0.3937 19800 5130 3370 26800
45.000 85.000 7.938 75800 0.31 1.96 19600 10300 1.91 88800 358 354-B
1.7717 3.3465 0.3125 17000 4420 2320 20000
45.000 90.000 8.887 79500 0.32 1.88 20600 11300 1.83 95800 367 362-B
1.7717 3.5433 0.3499 17900 4640 2540 21500
45.237 87.312 11.112 105000 0.31 1.96 27200 14300 1.91 134000 3586 3525-B
1.7810 3.4375 0.4375 23600 6120 3210 30100
45.618 83.058 8.733 83800 0.33 1.79 21700 12500 1.74 111000 25590 25521-B
1.7960 3.2700 0.3438 18800 4880 2800 24900
46.038 79.375 7.539 48200 0.37 1.60 12500 7990 1.56 61300 18690 18620-B
1.8125 3.1250 0.2968 10800 2810 1800 13800
46.038 85.000 9.525 86400 0.35 1.73 22400 13300 1.69 117000 2984 2924-B
1.8125 3.3465 0.3750 19400 5040 2980 26200
46.038 92.075 11.115 118000 0.28 2.11 30500 14800 2.05 144000 436 432AB
1.8125 3.6250 0.4376 26400 6850 3330 32400
46.038 95.250 11.115 118000 0.28 2.11 30500 14800 2.05 144000 436 432-B
1.8125 3.7500 0.4376 26400 6850 3330 32400
47.625 88.900 8.887 79500 0.32 1.88 20600 11300 1.83 95800 369-S 362AB
1.8750 3.5000 0.3499 17900 4640 2540 21500
47.625 90.000 8.887 79500 0.32 1.88 20600 11300 1.83 95800 369A 362-B
1.8750 3.5433 0.3499 17900 4640 2540 21500
47.625 90.000 8.887 79500 0.32 1.88 20600 11300 1.83 95800 369-S 362-B
1.8750 3.5433 0.3499 17900 4640 2540 21500
47.625 93.264 11.112 113000 0.34 1.77 29300 17000 1.73 153000 3778 3720-B
1.8750 3.6718 0.4375 25400 6590 3820 34300
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
B
Caption:
Caption:
C 2
C
d B
D 1
D
R
d b D a
d a
•
B210 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
21.692 17.462 -4.8 89.659 4.762 3.5 50.0 56.0 82.0 30 12.2 0.0732 0.54
0.8540 0.6875 -0.19 3.5299 0.1875 0.14 1.97 2.20 3.23
1.19
30.886 23.812 -10.2 91.986 4.750 3.5 51.0 57.0 82.0 39.5 10.5 0.0808 0.79
1.2160 0.9375 -0.40 3.6215 0.1870 0.14 2.01 2.24 3.23
1.75
29.900 22.225 -9.1 97.536 5.558 0.8 51.0 52.0 87.0 42.5 11.3 0.0805 0.90
1.1772 0.8750 -0.36 3.8400 0.2188 0.03 2.01 2.05 3.43
1.98
29.900 22.225 -9.1 97.536 5.558 3.5 51.0 57.0 87.0 42.5 11.3 0.0805 0.89
1.1772 0.8750 -0.36 3.8400 0.2188 0.14 2.01 2.24 3.43
1.96
29.900 22.225 -9.1 100.686 5.558 0.8 51.0 52.0 87.0 42.5 11.3 0.0805 0.98
1.1772 0.8750 -0.36 3.9640 0.2188 0.03 2.01 2.05 3.43
2.16
29.900 22.225 -9.1 100.686 5.558 3.5 51.0 57.0 87.0 42.5 11.3 0.0805 0.97
1.1772 0.8750 -0.36 3.9640 0.2188 0.14 2.01 2.24 3.43
2.15
28.301 20.638 -0.3 104.673 6.350 1.3 52.5 59.0 92.0 26.7 9.63 0.0930 1.06
1.1142 0.8125 -0.01 4.1210 0.2500 0.05 2.07 2.32 3.62
2.33
31.750 25.400 -7.1 107.056 5.558 0.8 54.0 55.0 98.0 49.1 14.2 0.0946 1.31
1.2500 1.0000 -0.28 4.2148 0.2188 0.03 2.13 2.17 3.86
2.88
29.317 22.225 -7.1 113.386 5.558 3.5 54.0 60.0 100.0 58.6 17.1 0.0946 1.37
1.1542 0.8750 -0.28 4.4640 0.2188 0.14 2.13 2.36 3.94
3.02
36.512 26.988 -9.7 115.214 6.350 3.5 56.0 63.0 101.0 57.3 14.7 0.0999 1.72
1.4375 1.0625 -0.38 4.5360 0.2500 0.14 2.20 2.48 3.98
3.79
41.275 31.750 -14.0 127.691 7.142 3.5 56.0 62.0 110.0 75.9 16.2 0.0694 2.49
1.6250 1.2500 -0.55 5.0272 0.2812 0.14 2.20 2.44 4.33
5.50
52.388 41.275 -19.6 134.925 7.938 3.5 60.0 67.0 117.0 103 18.7 0.0757 3.66
2.0625 1.6250 -0.77 5.3120 0.3125 0.14 2.36 2.64 4.61
8.07
25.400 19.050 -6.4 86.919 3.970 1.5 51.0 53.0 80.0 35.2 14.3 0.0801 0.57
1.0000 0.7500 -0.25 3.4220 0.1563 0.06 2.01 2.09 3.15
1.27
30.302 23.812 -8.1 97.937 4.762 3.5 53.0 59.0 90.0 49.9 14.5 0.0903 0.98
1.1930 0.9375 -0.32 3.8558 0.1875 0.14 2.09 2.32 3.54
2.16
20.000 15.500 -3.3 79.000 3.500 1.0 51.0 53.0 74.0 28.7 16.2 0.0788 0.36
0.7874 0.6102 -0.13 3.1102 0.1378 0.04 2.01 2.09 2.91
0.79
26.000 20.500 -6.6 85.000 4.500 1.5 52.0 55.0 79.0 35.7 14.5 0.0843 0.55
1.0236 0.8071 -0.26 3.3465 0.1772 0.06 2.05 2.17 3.11
1.22
21.692 17.462 -4.8 89.659 4.762 1.5 50.0 53.0 82.0 30 12.2 0.0732 0.54
0.8540 0.6875 -0.19 3.5299 0.1875 0.06 1.97 2.09 3.23
1.19
22.225 15.875 -4.3 94.661 4.762 2.0 51.0 55.0 86.0 33.8 14 0.0773 0.62
0.8750 0.6250 -0.17 3.7268 0.1875 0.08 2.01 2.17 3.39
1.37
30.886 23.812 -10.2 91.986 4.750 3.5 52.0 58.0 82.0 39.5 10.5 0.0808 0.78
1.2160 0.9375 -0.40 3.6215 0.1870 0.14 2.05 2.28 3.23
1.72
25.400 19.050 -6.4 86.919 3.970 3.5 51.0 58.0 80.0 35.2 14.3 0.0801 0.56
1.0000 0.7500 -0.25 3.4220 0.1563 0.14 2.01 2.28 3.15
1.23
17.462 13.495 -2.0 84.038 3.571 2.8 51.0 56.0 77.0 23.9 17.7 0.0725 0.35
0.6875 0.5313 -0.08 3.3086 0.1406 0.11 2.01 2.20 3.03
0.77
25.608 20.638 -6.4 89.764 4.762 3.5 52.0 58.0 82.0 38.2 15.7 0.0832 0.65
1.0082 0.8125 -0.25 3.5340 0.1875 0.14 2.05 2.28 3.23
1.43
29.900 22.225 -9.1 97.536 5.558 3.5 52.0 59.0 87.0 42.5 11.3 0.0805 0.86
1.1772 0.8750 -0.36 3.8400 0.2188 0.14 2.05 2.32 3.43
1.90
29.900 22.225 -9.1 100.686 5.558 3.5 52.0 59.0 87.0 42.5 11.3 0.0805 0.95
1.1772 0.8750 -0.36 3.9640 0.2188 0.14 2.05 2.32 3.43
2.09
22.225 16.513 -4.3 93.662 4.762 2.3 53.0 57.0 86.0 33.8 14 0.0773 0.58
0.8750 0.6501 -0.17 3.6875 0.1875 0.09 2.09 2.24 3.39
1.28
22.225 15.875 -4.3 94.661 4.762 3.5 53.0 60.0 86.0 33.8 14 0.0773 0.59
0.8750 0.6250 -0.17 3.7268 0.1875 0.14 2.09 2.36 3.39
1.29
22.225 15.875 -4.3 94.661 4.762 2.3 53.0 57.0 86.0 33.8 14 0.0773 0.59
0.8750 0.6250 -0.17 3.7268 0.1875 0.09 2.09 2.24 3.39
1.30
30.302 23.812 -8.1 97.937 4.762 6.4 55.0 67.0 90.0 49.9 14.5 0.0903 0.92
1.1930 0.9375 -0.32 3.8558 0.1875 0.25 2.17 2.64 3.54
2.02
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B211
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF
SINGLE-ROW
T 1
a
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
47.625 93.264 11.112 113000 0.34 1.77 29300 17000 1.73 153000 3779 3720-B
1.8750 3.6718 0.4375 25400 6590 3820 34300
47.625 95.250 11.140 115000 0.55 1.10 29900 27900 1.07 157000 HM804846 HM804811-B
1.8750 3.7500 0.4386 25900 6710 6280 35400
47.625 107.950 11.112 126000 0.34 1.79 32600 18700 1.74 166000 463 453-B
1.8750 4.2500 0.4375 28200 7320 4200 37200
47.625 107.950 11.112 126000 0.34 1.79 32600 18700 1.74 166000 467 453-B
1.8750 4.2500 0.4375 28200 7320 4200 37200
47.625 108.966 14.288 158000 0.40 1.49 41000 28200 1.45 202000 59187 59429-B
1.8750 4.2900 0.5625 35500 9210 6340 45400
47.625 120.650 16.574 192000 0.31 1.91 49800 26800 1.86 244000 617 612-B
1.8750 4.7500 0.6525 43200 11200 6020 54800
49.212 90.000 8.887 79500 0.32 1.88 20600 11300 1.83 95800 365-S 362-B
1.9375 3.5433 0.3499 17900 4640 2540 21500
49.212 111.125 14.288 159000 0.30 2.02 41300 21000 1.97 206000 545 532-B
1.9375 4.3750 0.5625 35800 9290 4720 46200
49.212 114.300 16.670 207000 0.43 1.39 53700 39500 1.36 256000 65390 65320-B
1.9375 4.5000 0.6563 46500 12100 8880 57500
49.982 111.125 14.288 159000 0.30 2.02 41300 21000 1.97 206000 546 532-B
1.9678 4.3750 0.5625 35800 9290 4720 46200
49.987 80.962 7.145 56300 0.36 1.69 14600 8880 1.64 88800 L305648 L305610-B
1.9680 3.1875 0.2813 12700 3280 2000 20000
50.000 90.000 8.887 79500 0.32 1.88 20600 11300 1.83 95800 365 362-B
1.9685 3.5433 0.3499 17900 4640 2540 21500
50.000 90.000 8.887 79500 0.32 1.88 20600 11300 1.83 95800 366 362-B
1.9685 3.5433 0.3499 17900 4640 2540 21500
50.800 77.788 5.969 34600 0.34 1.78 8960 5160 1.74 47200 LL205449 LL205410-B
2.0000 3.0625 0.2350 7770 2010 1160 10600
50.800 80.962 7.145 56300 0.36 1.69 14600 8880 1.64 88800 L305649 L305610-B
2.0000 3.1875 0.2813 12700 3280 2000 20000
50.800 85.000 7.539 50600 0.41 1.48 13100 9110 1.44 67500 18790 18720-B
2.0000 3.3465 0.2968 11400 2950 2050 15200
50.800 85.725 9.906 47800 0.57 1.06 12400 12000 1.03 63900 18200 18337-B
2.0000 3.3750 0.3900 10700 2780 2710 14400
50.800 88.900 8.887 79500 0.32 1.88 20600 11300 1.83 95800 368 362AB
2.0000 3.5000 0.3499 17900 4640 2540 21500
50.800 88.900 8.887 79500 0.32 1.88 20600 11300 1.83 95800 368A 362AB
2.0000 3.5000 0.3499 17900 4640 2540 21500
50.800 90.000 8.887 79500 0.32 1.88 20600 11300 1.83 95800 368 362-B
2.0000 3.5433 0.3499 17900 4640 2540 21500
50.800 90.000 8.887 79500 0.32 1.88 20600 11300 1.83 95800 368A 362-B
2.0000 3.5433 0.3499 17900 4640 2540 21500
50.800 92.075 8.730 91600 0.38 1.59 23700 15300 1.55 130000 28580 28521-B
2.0000 3.6250 0.3437 20600 5340 3450 29200
50.800 93.264 11.112 113000 0.34 1.77 29300 17000 1.73 153000 3775 3720-B
2.0000 3.6718 0.4375 25400 6590 3820 34300
50.800 93.264 11.112 113000 0.34 1.77 29300 17000 1.73 153000 3780 3720-B
2.0000 3.6718 0.4375 25400 6590 3820 34300
50.800 101.600 11.908 123000 0.40 1.50 31900 21900 1.46 155000 49585 49520-B
2.0000 4.0000 0.4688 27600 7160 4910 35000
50.800 104.775 11.908 142000 0.33 1.80 36800 20900 1.76 189000 45285 45220-B
2.0000 4.1250 0.4688 31900 8270 4710 42600
50.800 104.775 11.908 142000 0.33 1.80 36800 20900 1.76 189000 45285A 45220-B
2.0000 4.1250 0.4688 31900 8270 4710 42600
50.800 104.775 11.908 158000 0.40 1.49 41000 28200 1.45 202000 59201 59412-B
2.0000 4.1250 0.4688 35500 9210 6340 45400
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
B
Caption:
Caption:
C 2
C
d B
D 1
D
R
d b D a
d a
•
B212 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
30.302 23.812 -8.1 97.937 4.762 3.5 55.0 61.0 90.0 49.9 14.5 0.0903 0.93
1.1930 0.9375 -0.32 3.8558 0.1875 0.14 2.17 2.40 3.54
2.06
29.370 24.021 -3.8 100.686 5.001 3.5 57.5 66.0 93.0 44.8 14.6 0.1017 1.01
1.1563 0.9457 -0.15 3.9640 0.1969 0.14 2.26 2.60 3.66
2.24
29.317 22.225 -7.1 113.386 5.558 4.8 56.0 65.0 100.0 58.6 17.1 0.0946 1.31
1.1542 0.8750 -0.28 4.4640 0.2188 0.19 2.20 2.56 3.94
2.89
29.317 22.225 -7.1 113.386 5.558 0.8 56.0 57.0 100.0 58.6 17.1 0.0946 1.32
1.1542 0.8750 -0.28 4.4640 0.2188 0.03 2.20 2.24 3.94
2.92
36.512 26.988 -9.7 115.214 6.350 3.5 59.0 65.0 101.0 57.3 14.7 0.0999 1.65
1.4375 1.0625 -0.38 4.5360 0.2500 0.14 2.32 2.56 3.98
3.64
41.275 31.750 -14.0 127.691 7.142 3.5 58.0 65.0 110.0 75.9 16.2 0.0694 2.42
1.6250 1.2500 -0.55 5.0272 0.2812 0.14 2.28 2.56 4.33
5.33
22.225 15.875 -4.3 94.661 4.762 0.8 54.0 55.0 86.0 33.8 14 0.0773 0.57
0.8750 0.6250 -0.17 3.7268 0.1875 0.03 2.13 2.17 3.39
1.25
36.957 30.162 -12.2 117.373 6.350 3.5 57.0 64.0 100.0 64.3 16.1 0.0938 1.79
1.4550 1.1875 -0.48 4.6210 0.2500 0.14 2.24 2.52 3.94
3.94
44.450 34.925 -12.4 121.341 7.145 3.5 60.0 70.0 107.0 63.1 13 0.1053 2.30
1.7500 1.3750 -0.49 4.7772 0.2813 0.14 2.36 2.76 4.21
5.07
36.957 30.162 -12.2 117.373 6.350 3.5 58.0 65.0 100.0 64.3 16.1 0.0938 1.77
1.4550 1.1875 -0.48 4.6210 0.2500 0.14 2.28 2.56 3.94
3.90
18.258 14.288 -2.5 84.036 3.175 1.5 55.0 57.0 78.0 38.8 27.8 0.0841 0.38
0.7188 0.5625 -0.10 3.3085 0.1250 0.06 2.17 2.24 3.07
0.83
22.225 15.875 -4.3 94.661 4.762 2.0 55.0 58.0 86.0 33.8 14 0.0773 0.56
0.8750 0.6250 -0.17 3.7268 0.1875 0.08 2.17 2.28 3.39
1.23
22.225 15.875 -4.3 94.661 4.762 2.3 55.0 59.0 86.0 33.8 14 0.0773 0.56
0.8750 0.6250 -0.17 3.7268 0.1875 0.09 2.17 2.32 3.39
1.23
12.700 9.525 0.0 80.582 2.794 1.5 55.0 57.0 75.0 24.2 29.1 0.0699 0.21
0.5000 0.3750 0.00 3.1725 0.1100 0.06 2.17 2.24 2.95
0.47
18.258 14.288 -2.5 84.036 3.175 1.5 56.0 58.0 78.0 38.8 27.8 0.0841 0.37
0.7188 0.5625 -0.10 3.3085 0.1250 0.06 2.20 2.28 3.07
0.81
17.462 13.495 -0.8 88.570 3.571 3.5 56.0 62.0 82.0 28.6 21.5 0.0789 0.40
0.6875 0.5313 -0.03 3.4870 0.1406 0.14 2.20 2.44 3.23
0.89
18.263 12.700 2.0 89.586 3.556 1.5 56.0 59.0 83.0 26.1 20.3 0.0852 0.42
0.7190 0.5000 0.08 3.5270 0.1400 0.06 2.20 2.32 3.27
0.92
22.225 16.513 -4.3 93.662 4.762 1.5 56.0 58.0 86.0 33.8 14 0.0773 0.53
0.8750 0.6501 -0.17 3.6875 0.1875 0.06 2.20 2.28 3.39
1.18
22.225 16.513 -4.3 93.662 4.762 3.5 56.0 62.0 86.0 33.8 12.7 0.0773 0.53
0.8750 0.6501 -0.17 3.6875 0.1875 0.14 2.20 2.44 3.39
1.16
22.225 15.875 -4.3 94.661 4.762 1.5 56.0 58.0 86.0 33.8 14 0.0773 0.54
0.8750 0.6250 -0.17 3.7268 0.1875 0.06 2.20 2.28 3.39
1.20
22.225 15.875 -4.3 94.661 4.762 3.5 56.0 62.0 86.0 33.8 12.7 0.0773 0.54
0.8750 0.6250 -0.17 3.7268 0.1875 0.14 2.20 2.44 3.39
1.19
25.400 19.845 -4.8 95.941 3.967 3.5 57.0 63.0 89.0 46.4 22.6 0.0912 0.73
1.0000 0.7813 -0.19 3.7772 0.1562 0.14 2.24 2.48 3.50
1.61
30.302 23.812 -8.1 97.937 4.762 0.8 58.0 58.0 90.0 49.9 14.5 0.0903 0.88
1.1930 0.9375 -0.32 3.8558 0.1875 0.03 2.28 2.28 3.54
1.95
30.302 23.812 -8.1 97.937 4.762 3.5 58.0 64.0 90.0 49.9 14.5 0.0903 0.87
1.1930 0.9375 -0.32 3.8558 0.1875 0.14 2.28 2.52 3.54
1.93
31.750 25.400 -7.1 107.056 5.558 3.5 59.0 66.0 98.0 49.1 14.2 0.0946 1.18
1.2500 1.0000 -0.28 4.2148 0.2188 0.14 2.32 2.60 3.86
2.61
30.958 23.812 -8.1 110.231 5.558 2.3 59.0 63.0 101.0 63.5 16.9 0.0971 1.26
1.2188 0.9375 -0.32 4.3398 0.2188 0.09 2.32 2.48 3.98
2.77
30.958 23.812 -8.1 110.231 5.558 0.8 59.0 60.0 101.0 63.5 16.9 0.0971 1.25
1.2188 0.9375 -0.32 4.3398 0.2188 0.03 2.32 2.36 3.98
2.76
36.512 28.575 -9.7 110.500 3.970 0.8 61.0 62.0 101.0 57.3 14.7 0.0999 1.45
1.4375 1.1250 -0.38 4.3504 0.1563 0.03 2.40 2.44 3.98
3.19
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B213
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF
SINGLE-ROW
T 1
a
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
50.800 104.775 15.875 159000 0.49 1.23 41200 34400 1.20 223000 HM807046 HM807010-B
2.0000 4.1250 0.6250 35700 9260 7730 50200
50.800 107.950 11.112 126000 0.34 1.79 32600 18700 1.74 166000 455 453-B
2.0000 4.2500 0.4375 28200 7320 4200 37200
50.800 107.950 11.115 126000 0.34 1.79 32600 18700 1.74 166000 455-S 453-B
2.0000 4.2500 0.4376 28200 7320 4200 37200
50.800 111.125 15.083 98500 0.88 0.68 25500 38600 0.66 119000 55200 55437-B
2.0000 4.3750 0.5938 22100 5740 8690 26700
50.800 120.650 16.667 192000 0.31 1.91 49800 26800 1.86 244000 619 612-B
2.0000 4.7500 0.6562 43200 11200 6020 54800
50.800 127.000 16.670 225000 0.49 1.23 58500 48800 1.20 297000 65200 65500-B
2.0000 5.0000 0.6563 50700 13100 11000 66700
52.000 85.725 9.906 47800 0.57 1.06 12400 12000 1.03 63900 18204X 18337-B
2.0472 3.3750 0.3900 10700 2780 2710 14400
52.388 92.075 8.730 91600 0.38 1.59 23700 15300 1.55 130000 28584 28521-B
2.0625 3.6250 0.3437 20600 5340 3450 29200
52.388 93.264 11.112 113000 0.34 1.77 29300 17000 1.73 153000 3767 3720-B
2.0625 3.6718 0.4375 25400 6590 3820 34300
52.388 111.125 15.083 98500 0.88 0.68 25500 38600 0.66 119000 55206 55437-B
2.0625 4.3750 0.5938 22100 5740 8690 26700
53.975 93.264 10.320 120000 0.33 1.82 31100 17600 1.77 161000 33895 33820-B
2.1250 3.6718 0.4063 27000 7000 3950 36200
53.975 107.950 11.115 126000 0.34 1.79 32600 18700 1.74 166000 456 453-B
2.1250 4.2500 0.4376 28200 7320 4200 37200
53.975 120.650 16.667 192000 0.31 1.91 49800 26800 1.86 244000 621 612-B
2.1250 4.7500 0.6562 43200 11200 6020 54800
53.975 123.825 14.288 177000 0.35 1.73 45800 27100 1.69 248000 557-S 552-B
2.1250 4.8750 0.5625 39700 10300 6100 55700
53.975 127.000 7.137 177000 0.35 1.73 45800 27100 1.69 248000 557-S 553-BA
2.1250 5.0000 0.2810 39700 10300 6100 55700
53.975 127.000 17.462 283000 0.30 2.01 73500 37500 1.96 370000 6280 6220-B
2.1250 5.0000 0.6875 63700 16500 8440 83300
53.975 136.525 16.662 216000 0.36 1.66 55900 34700 1.61 298000 636 632-B
2.1250 5.3750 0.6560 48500 12600 7790 67000
54.813 135.755 17.462 298000 0.32 1.85 77200 42900 1.80 404000 6380 6320-B
2.1580 5.3447 0.6875 66900 17300 9640 90900
54.987 135.755 17.462 298000 0.32 1.85 77200 42900 1.80 404000 6381 6320-B
2.1649 5.3447 0.6875 66900 17300 9640 90900
55.000 96.838 7.938 84200 0.35 1.69 21800 13200 1.65 107000 385 382-B
2.1654 3.8125 0.3125 18900 4910 2980 24100
55.000 110.000 16.000 183000 0.40 1.48 47500 32800 1.44 253000 XGB-33212 Y33212R
2.1654 4.3307 0.6299 41200 10700 7380 56800
55.000 120.000 11.095 133000 0.38 1.56 34400 22700 1.52 186000 475 472-B
2.1654 4.7244 0.4368 29900 7740 5100 41900
55.562 107.950 11.112 126000 0.34 1.79 32600 18700 1.74 166000 466-S 453-B
2.1875 4.2500 0.4375 28200 7320 4200 37200
55.575 96.838 7.938 84200 0.35 1.69 21800 13200 1.65 107000 389 382-B
2.1880 3.8125 0.3125 18900 4910 2980 24100
57.150 84.933 5.969 33500 0.37 1.62 8670 5500 1.58 46800 LL408049 LL408010-B
2.2500 3.3438 0.2350 7520 1950 1240 10500
57.150 87.312 7.145 58100 0.39 1.54 15100 10000 1.50 95600 L507949 L507910-B
2.2500 3.4375 0.2813 13100 3380 2250 21500
57.150 96.838 7.938 84200 0.35 1.69 21800 13200 1.65 107000 387 382-B
2.2500 3.8125 0.3125 18900 4910 2980 24100
57.150 96.838 7.938 84200 0.35 1.69 21800 13200 1.65 107000 387A 382-B
2.2500 3.8125 0.3125 18900 4910 2980 24100
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
B
Caption:
Caption:
C 2
C
d B
D 1
D
R
d b D a
d a
•
B214 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
36.512 28.575 -7.4 114.300 7.937 3.5 63.0 70.0 103.0 63.9 17.1 0.0760 1.60
1.4375 1.1250 -0.29 4.5000 0.3125 0.14 2.48 2.76 4.06
3.53
29.317 22.225 -7.1 113.386 5.558 0.8 59.0 60.0 100.0 58.6 17.1 0.0946 1.27
1.1542 0.8750 -0.28 4.4640 0.2188 0.03 2.32 2.36 3.94
2.79
29.317 22.225 -7.1 113.386 5.558 3.5 59.0 65.0 100.0 58.6 17.1 0.0946 1.26
1.1542 0.8750 -0.28 4.4640 0.2188 0.14 2.32 2.56 3.94
2.78
26.909 20.638 7.1 116.683 5.558 3.5 64.0 71.0 107.0 36.8 13.2 0.1085 1.28
1.0594 0.8125 0.28 4.5938 0.2188 0.14 2.51 2.80 4.21
2.83
41.275 31.750 -14.0 127.691 7.142 3.5 61.0 67.0 110.0 75.9 16.2 0.0694 2.34
1.6250 1.2500 -0.55 5.0272 0.2812 0.14 2.40 2.64 4.33
5.16
44.450 34.925 -9.4 134.041 7.145 3.5 69.0 75.0 120.0 83.2 17.2 0.0827 2.99
1.7500 1.3750 -0.37 5.2772 0.2813 0.14 2.72 2.95 4.72
6.59
18.263 12.700 2.0 89.586 3.556 2.0 57.0 60.0 83.0 26.1 20.3 0.0852 0.40
0.7190 0.5000 0.08 3.5270 0.1400 0.08 2.24 2.36 3.27
0.89
25.400 19.845 -4.8 95.941 3.967 3.5 58.0 65.0 89.0 46.4 22.6 0.0912 0.69
1.0000 0.7813 -0.19 3.7772 0.1562 0.14 2.28 2.56 3.50
1.53
30.302 23.812 -8.1 97.937 4.762 2.3 59.0 63.0 90.0 49.9 14.5 0.0903 0.85
1.1930 0.9375 -0.32 3.8558 0.1875 0.09 2.32 2.48 3.54
1.87
26.909 20.638 7.1 116.683 5.558 3.5 64.0 72.0 107.0 36.8 13.2 0.1085 1.25
1.0594 0.8125 0.28 4.5938 0.2188 0.14 2.51 2.83 4.21
2.77
28.575 22.225 -7.6 97.937 4.762 1.5 60.0 63.0 91.0 52.5 18.5 0.0910 0.78
1.1250 0.8750 -0.30 3.8558 0.1875 0.06 2.36 2.48 3.58
1.72
29.317 22.225 -7.1 113.386 5.558 3.5 61.0 68.0 100.0 58.6 17.1 0.0946 1.20
1.1542 0.8750 -0.28 4.4640 0.2188 0.14 2.40 2.68 3.94
2.64
41.275 31.750 -14.0 127.691 7.142 3.5 63.0 70.0 110.0 75.9 16.2 0.0694 2.25
1.6250 1.2500 -0.55 5.0272 0.2812 0.14 2.48 2.76 4.33
4.97
36.678 30.162 -9.4 130.073 6.350 3.5 65.0 71.0 116.0 91 21.1 0.1108 2.30
1.4440 1.1875 -0.37 5.1210 0.2500 0.14 2.56 2.80 4.57
5.07
36.678 34.925 -9.4 133.248 6.350 3.5 65.0 71.0 116.0 91 21.1 0.1108 2.45
1.4440 1.3750 -0.37 5.2460 0.2500 0.14 2.56 2.80 4.57
5.39
52.388 41.275 -19.6 134.925 7.938 3.5 67.0 74.0 117.0 103 18.7 0.0757 3.36
2.0625 1.6250 -0.77 5.3120 0.3125 0.14 2.64 2.91 4.61
7.40
41.275 31.750 -11.2 143.561 7.137 3.5 67.0 73.0 125.0 106 21 0.0814 3.20
1.6250 1.2500 -0.44 5.6520 0.2810 0.14 2.64 2.87 4.92
7.06
56.007 44.450 -19.3 143.579 7.938 0.8 70.0 71.0 126.0 124 22.4 0.0827 4.17
2.2050 1.7500 -0.76 5.6527 0.3125 0.03 2.76 2.80 4.96
9.20
56.007 44.450 -19.3 143.579 7.938 3.5 70.0 76.0 126.0 124 22.4 0.0827 4.16
2.2050 1.7500 -0.76 5.6527 0.3125 0.14 2.76 2.99 4.96
9.17
21.946 17.826 -3.0 101.498 4.762 2.3 61.0 65.0 94.0 42 15.7 0.0859 0.66
0.8640 0.7018 -0.12 3.9960 0.1875 0.09 2.40 2.56 3.70
1.46
38.000 29.000 -9.9 116.000 7.000 0.8 68.0 71.0 107.0 76.2 18.1 0.0758 1.72
1.4961 1.1417 -0.39 4.5669 0.2756 0.03 2.68 2.80 4.21
3.80
29.007 24.237 -4.1 125.435 5.537 0.8 66.0 67.0 115.0 77.2 23 0.1083 1.70
1.1420 0.9542 -0.16 4.9384 0.2180 0.03 2.60 2.64 4.53
3.74
29.317 22.225 -7.1 113.386 5.558 2.3 62.0 66.0 100.0 58.6 17.1 0.0946 1.17
1.1542 0.8750 -0.28 4.4640 0.2188 0.09 2.44 2.60 3.94
2.59
21.946 17.826 -3.0 101.498 4.762 2.3 61.0 65.0 94.0 42 15.7 0.0859 0.65
0.8640 0.7018 -0.12 3.9960 0.1875 0.09 2.40 2.56 3.70
1.44
12.700 9.525 1.5 87.727 2.794 1.5 61.0 64.0 82.0 27.4 36.3 0.0749 0.24
0.5000 0.3750 0.06 3.4538 0.1100 0.06 2.40 2.52 3.23
0.52
18.258 14.288 -0.8 90.487 3.175 1.5 62.0 65.0 85.0 46.1 36.9 0.0914 0.40
0.7188 0.5625 -0.03 3.5625 0.1250 0.06 2.44 2.56 3.35
0.88
21.946 17.826 -3.0 101.498 4.762 2.3 62.0 66.0 94.0 42 15.7 0.0859 0.63
0.8640 0.7018 -0.12 3.9960 0.1875 0.09 2.44 2.60 3.70
1.38
21.946 17.826 -3.0 101.498 4.762 3.5 62.0 69.0 94.0 42 15.7 0.0859 0.62
0.8640 0.7018 -0.12 3.9960 0.1875 0.14 2.44 2.72 3.70
1.37
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B215
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF
SINGLE-ROW
T 1
a
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
57.150 97.630 9.124 96300 0.40 1.49 25000 17200 1.45 142000 28682 28622-B
2.2500 3.8437 0.3592 21600 5610 3870 32000
57.150 104.775 11.908 142000 0.33 1.80 36800 20900 1.76 189000 45290 45220-B
2.2500 4.1250 0.4688 31900 8270 4710 42600
57.150 104.775 11.908 142000 0.33 1.80 36800 20900 1.76 189000 45291 45220-B
2.2500 4.1250 0.4688 31900 8270 4710 42600
57.150 107.950 11.115 126000 0.34 1.79 32600 18700 1.74 166000 462 453-B
2.2500 4.2500 0.4376 28200 7320 4200 37200
57.150 107.950 11.115 126000 0.34 1.79 32600 18700 1.74 166000 469 453-B
2.2500 4.2500 0.4376 28200 7320 4200 37200
57.150 112.712 11.112 129000 0.40 1.49 33300 22900 1.45 191000 3979 3920-B
2.2500 4.4375 0.4375 28900 7490 5160 43000
57.150 120.650 16.667 192000 0.31 1.91 49800 26800 1.86 244000 623 612-B
2.2500 4.7500 0.6562 43200 11200 6020 54800
57.150 123.825 14.288 177000 0.35 1.73 45800 27100 1.69 248000 555-S 552-B
2.2500 4.8750 0.5625 39700 10300 6100 55700
57.150 135.755 17.462 298000 0.32 1.85 77200 42900 1.80 404000 6375 6320-B
2.2500 5.3447 0.6875 66900 17300 9640 90900
57.150 136.525 16.662 216000 0.36 1.66 55900 34700 1.61 298000 635 632-B
2.2500 5.3750 0.6560 48500 12600 7790 67000
57.150 139.700 17.462 225000 0.49 1.23 58500 48800 1.20 297000 65225 65550-B
2.2500 5.5000 0.6875 50700 13100 11000 66700
57.150 149.225 17.462 321000 0.36 1.66 83300 51600 1.61 463000 6455 6420-B
2.2500 5.8750 0.6875 72200 18700 11600 104000
58.738 112.712 11.112 129000 0.40 1.49 33300 22900 1.45 191000 3981 3920-B
2.3125 4.4375 0.4375 28900 7490 5160 43000
59.931 150.089 15.875 294000 0.33 1.84 76300 42500 1.80 417000 745 742-B
2.3595 5.9090 0.6250 66100 17100 9550 93800
59.977 100.000 9.525 98200 0.43 1.41 25500 18500 1.37 149000 28980 28921-B
2.3613 3.9370 0.3750 22100 5720 4170 33500
59.987 104.775 10.320 89600 0.39 1.55 23200 15400 1.51 120000 39236 39412-B
2.3617 4.1250 0.4063 20100 5220 3470 27000
59.987 129.944 14.288 177000 0.35 1.73 45800 27100 1.69 248000 558-S 553-SB
2.3617 5.1159 0.5625 39700 10300 6100 55700
59.987 130.175 16.637 154000 0.82 0.73 40000 56200 0.71 183000 HM911244 HM911210-B
2.3617 5.1250 0.6550 34700 9000 12600 41100
60.000 100.000 8.500 80900 0.47 1.27 21000 17000 1.24 101000 JP6049 JP6010-B
2.3622 3.9370 0.3346 18200 4710 3820 22800
60.000 107.950 10.320 102000 0.46 1.31 26400 20800 1.27 161000 29580 29520-B
2.3622 4.2500 0.4063 22900 5950 4670 36300
60.000 110.000 10.320 102000 0.46 1.31 26400 20800 1.27 161000 29580 29521-B
2.3622 4.3307 0.4063 22900 5950 4670 36300
60.000 112.712 11.112 129000 0.40 1.49 33300 22900 1.45 191000 3977 3920-B
2.3622 4.4375 0.4375 28900 7490 5160 43000
60.000 120.000 11.095 133000 0.38 1.56 34400 22700 1.52 186000 476 472-B
2.3622 4.7244 0.4368 29900 7740 5100 41900
60.325 100.000 9.525 98200 0.43 1.41 25500 18500 1.37 149000 28985 28921-B
2.3750 3.9370 0.3750 22100 5720 4170 33500
60.325 112.712 11.112 129000 0.40 1.49 33300 22900 1.45 191000 3980 3920-B
2.3750 4.4375 0.4375 28900 7490 5160 43000
60.325 123.825 14.288 177000 0.35 1.73 45800 27100 1.69 248000 558 552-B
2.3750 4.8750 0.5625 39700 10300 6100 55700
60.325 130.175 19.050 154000 0.82 0.73 40000 56200 0.71 183000 HM911245 HM911210-B
2.3750 5.1250 0.7500 34700 9000 12600 41100
60.325 135.755 17.462 298000 0.32 1.85 77200 42900 1.80 404000 6376 6320-B
2.3750 5.3447 0.6875 66900 17300 9640 90900
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
B
Caption:
Caption:
C 2
C
d B
D 1
D
R
d b D a
d a
•
B216 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
24.608 19.446 -3.3 101.498 3.962 3.5 63.0 70.0 94.0 54 20.2 0.0979 0.75
0.9688 0.7656 -0.13 3.9960 0.1560 0.14 2.48 2.76 3.70
1.66
30.958 23.812 -8.1 110.231 5.558 2.3 65.0 68.0 101.0 63.5 16.9 0.0971 1.12
1.2188 0.9375 -0.32 4.3398 0.2188 0.09 2.56 2.68 3.98
2.48
30.958 23.812 -8.1 110.231 5.558 6.4 65.0 76.0 101.0 63.5 16.9 0.0971 1.09
1.2188 0.9375 -0.32 4.3398 0.2188 0.25 2.56 2.99 3.98
2.41
29.317 22.225 -7.1 113.386 5.558 2.3 63.0 67.0 100.0 58.6 17.1 0.0946 1.14
1.1542 0.8750 -0.28 4.4640 0.2188 0.09 2.48 2.64 3.94
2.51
29.317 22.225 -7.1 113.386 5.558 3.5 63.0 70.0 100.0 58.6 17.1 0.0946 1.14
1.1542 0.8750 -0.28 4.4640 0.2188 0.14 2.48 2.76 3.94
2.50
30.048 23.812 -4.6 117.373 4.762 3.5 66.0 72.0 108.0 75.2 21.3 0.1092 1.41
1.1830 0.9375 -0.18 4.6210 0.1875 0.14 2.60 2.83 4.25
3.10
41.275 31.750 -14.0 127.691 7.142 3.5 66.0 72.0 110.0 75.9 16.2 0.0694 2.16
1.6250 1.2500 -0.55 5.0272 0.2812 0.14 2.60 2.83 4.33
4.77
36.678 30.162 -9.4 130.073 6.350 3.5 67.0 73.0 116.0 91 21.1 0.1108 2.22
1.4440 1.1875 -0.37 5.1210 0.2500 0.14 2.64 2.87 4.57
4.89
56.007 44.450 -19.3 143.579 7.938 4.3 72.0 80.0 126.0 124 22.4 0.0827 4.07
2.2050 1.7500 -0.76 5.6527 0.3125 0.17 2.83 3.15 4.96
8.97
41.275 31.750 -11.2 143.561 7.137 3.5 69.0 75.0 125.0 106 21 0.0814 3.11
1.6250 1.2500 -0.44 5.6520 0.2810 0.14 2.72 2.95 4.92
6.86
44.450 34.925 -9.4 152.400 7.938 3.5 71.0 80.0 120.0 83.2 17.2 0.0827 3.60
1.7500 1.3750 -0.37 6.0000 0.3125 0.14 2.79 3.15 4.72
7.94
54.229 44.450 -15.0 157.061 7.938 3.5 75.0 81.0 140.0 158 29.1 0.0931 5.20
2.1350 1.7500 -0.59 6.1835 0.3125 0.14 2.95 3.19 5.51
11.46
30.048 23.812 -4.6 117.373 4.762 3.5 67.0 73.0 108.0 75.2 21.3 0.1092 1.37
1.1830 0.9375 -0.18 4.6210 0.1875 0.14 2.64 2.87 4.25
3.02
46.672 36.512 -11.9 157.912 7.938 3.5 75.0 81.0 143.0 160 26.3 0.0898 4.39
1.8375 1.4375 -0.47 6.2170 0.3125 0.14 2.95 3.19 5.63
9.68
25.400 19.845 -2.5 103.962 3.970 3.5 67.0 73.0 98.0 60.1 24.5 0.1032 0.79
1.0000 0.7813 -0.10 4.0930 0.1563 0.14 2.64 2.87 3.86
1.75
22.000 15.875 -1.5 109.433 4.762 2.3 67.0 71.0 102.0 51.7 19.5 0.0947 0.77
0.8661 0.6250 -0.06 4.3084 0.1875 0.09 2.64 2.80 4.02
1.71
36.678 30.162 -9.4 136.025 6.350 3.5 69.0 75.0 116.0 91 21.1 0.1108 2.45
1.4440 1.1875 -0.37 5.3553 0.2500 0.14 2.72 2.95 4.57
5.41
30.924 23.812 7.9 136.525 6.350 3.5 74.5 84.0 123.5 56.4 16.5 0.0842 2.09
1.2175 0.9375 0.31 5.3750 0.2500 0.14 2.93 3.31 4.87
4.60
20.000 15.500 1.3 105.000 3.000 2.0 66.0 69.0 98.0 39.5 22.5 0.0922 0.62
0.7874 0.6102 0.05 4.1339 0.1181 0.08 2.60 2.72 3.86
1.37
25.400 19.050 -0.8 111.816 3.970 3.5 68.0 75.0 105.0 70.3 25.8 0.1112 1.02
1.0000 0.7500 -0.03 4.4022 0.1563 0.14 2.68 2.95 4.13
2.26
25.400 19.050 -0.8 113.800 3.970 3.5 68.0 75.0 105.0 70.3 25.8 0.1112 1.08
1.0000 0.7500 -0.03 4.4803 0.1563 0.14 2.68 2.95 4.13
2.37
30.048 23.812 -4.6 117.373 4.762 3.5 68.0 74.0 108.0 75.2 21.3 0.1092 1.34
1.1830 0.9375 -0.18 4.6210 0.1875 0.14 2.68 2.91 4.25
2.96
29.007 24.237 -4.1 125.435 5.537 2.0 69.0 73.0 115.0 77.2 23 0.1083 1.59
1.1420 0.9542 -0.16 4.9384 0.2180 0.08 2.72 2.87 4.53
3.51
25.400 19.845 -2.5 103.962 3.970 3.5 67.0 73.0 98.0 60.1 24.5 0.1032 0.79
1.0000 0.7813 -0.10 4.0930 0.1563 0.14 2.64 2.87 3.86
1.73
30.048 23.812 -4.6 117.373 4.762 3.5 68.0 75.0 108.0 75.2 21.3 0.1092 1.34
1.1830 0.9375 -0.18 4.6210 0.1875 0.14 2.68 2.95 4.25
2.95
36.678 30.162 -9.4 130.073 6.350 2.3 69.0 73.0 116.0 91 21.1 0.1108 2.14
1.4440 1.1875 -0.37 5.1210 0.2500 0.09 2.72 2.87 4.57
4.72
33.338 23.812 5.3 136.525 6.350 5.0 74.5 87.0 123.5 56.4 16.5 0.0842 2.15
1.3125 0.9375 0.21 5.3750 0.2500 0.20 2.93 3.43 4.87
4.75
56.007 44.450 -19.3 143.579 7.938 3.5 74.0 81.0 126.0 124 22.4 0.0827 3.94
2.2050 1.7500 -0.76 5.6527 0.3125 0.14 2.91 3.19 4.96
8.70
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B217
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF
SINGLE-ROW
T 1
a
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
60.325 136.525 16.662 216000 0.36 1.66 55900 34700 1.61 298000 637 632-B
2.3750 5.3750 0.6560 48500 12600 7790 67000
60.325 161.925 23.012 275000 0.71 0.85 71400 86700 0.82 330000 9275 9221-B
2.3750 6.3750 0.9060 61900 16100 19500 74200
61.912 123.825 14.288 177000 0.35 1.73 45800 27100 1.69 248000 554 552-B
2.4375 4.8750 0.5625 39700 10300 6100 55700
61.912 130.175 19.050 154000 0.82 0.73 40000 56200 0.71 183000 HM911249 HM911210-B
2.4375 5.1250 0.7500 34700 9000 12600 41100
63.500 104.775 10.320 89600 0.39 1.55 23200 15400 1.51 120000 39250 39412-B
2.5000 4.1250 0.4063 20100 5220 3470 27000
63.500 107.950 10.320 102000 0.46 1.31 26400 20800 1.27 161000 29585 29520-B
2.5000 4.2500 0.4063 22900 5950 4670 36300
63.500 112.712 7.917 91600 0.40 1.49 23700 16300 1.45 125000 395 3920-B
2.5000 4.4375 0.3117 20600 5340 3670 28100
63.500 112.712 11.112 129000 0.40 1.49 33300 22900 1.45 191000 3982 3920-B
2.5000 4.4375 0.4375 28900 7490 5160 43000
63.500 120.000 11.095 133000 0.38 1.56 34400 22700 1.52 186000 477 472-B
2.5000 4.7244 0.4368 29900 7740 5100 41900
63.500 120.000 11.095 133000 0.38 1.56 34400 22700 1.52 186000 483 472-B
2.5000 4.7244 0.4368 29900 7740 5100 41900
63.500 123.825 14.288 177000 0.35 1.73 45800 27100 1.69 248000 559 552-B
2.5000 4.8750 0.5625 39700 10300 6100 55700
63.500 127.000 14.288 182000 0.36 1.65 47100 29400 1.61 262000 565 563-B
2.5000 5.0000 0.5625 40900 10600 6600 58900
63.500 136.525 16.637 252000 0.36 1.67 65400 40300 1.62 335000 H414235 H414210-B
2.5000 5.3750 0.6550 56700 14700 9060 75400
63.500 136.525 16.662 216000 0.36 1.66 55900 34700 1.61 298000 639 632-B
2.5000 5.3750 0.6560 48500 12600 7790 67000
63.500 149.225 17.462 321000 0.36 1.66 83300 51600 1.61 463000 6475 6420-B
2.5000 5.8750 0.6875 72200 18700 11600 104000
64.960 149.225 17.462 321000 0.36 1.66 83300 51600 1.61 463000 6464 6420-B
2.5575 5.8750 0.6875 72200 18700 11600 104000
64.963 127.000 14.288 182000 0.36 1.65 47100 29400 1.61 262000 569 563-B
2.5576 5.0000 0.5625 40900 10600 6600 58900
65.000 120.000 11.095 133000 0.38 1.56 34400 22700 1.52 186000 478 472-B
2.5591 4.7244 0.4368 29900 7740 5100 41900
65.088 135.755 17.462 298000 0.32 1.85 77200 42900 1.80 404000 6379 6320-B
2.5625 5.3447 0.6875 66900 17300 9640 90900
65.883 122.238 13.495 219000 0.36 1.67 56800 34800 1.63 327000 5595 5535-B
2.5938 4.8125 0.5313 49200 12800 7830 73500
66.675 107.950 10.320 102000 0.46 1.31 26400 20800 1.27 161000 29590 29520-B
2.6250 4.2500 0.4063 22900 5950 4670 36300
66.675 112.712 11.112 129000 0.40 1.49 33300 22900 1.45 191000 3984 3920-B
2.6250 4.4375 0.4375 28900 7490 5160 43000
66.675 120.000 11.095 133000 0.38 1.56 34400 22700 1.52 186000 479 472-B
2.6250 4.7244 0.4368 29900 7740 5100 41900
66.675 123.825 14.288 177000 0.35 1.73 45800 27100 1.69 248000 560 552-B
2.6250 4.8750 0.5625 39700 10300 6100 55700
66.675 130.200 19.865 179000 0.50 1.20 46400 39900 1.16 256000 HM813844 HM813815-B
2.6250 5.1260 0.7821 40300 10400 8970 57600
66.675 135.755 17.462 298000 0.32 1.85 77200 42900 1.80 404000 6386 6320-B
2.6250 5.3447 0.6875 66900 17300 9640 90900
66.675 136.525 16.662 216000 0.36 1.66 55900 34700 1.61 298000 641 632-B
2.6250 5.3750 0.6560 48500 12600 7790 67000
66.675 139.700 17.462 249000 0.47 1.27 64600 52300 1.24 405000 H715341 H715310-B
2.6250 5.5000 0.6875 56000 14500 11800 91000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
B
Caption:
Caption:
C 2
C
d B
D 1
D
R
d b D a
d a
•
B218 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
41.275 31.750 -11.2 143.561 7.137 3.5 72.0 78.0 125.0 106 21 0.0814 3.02
1.6250 1.2500 -0.44 5.6520 0.2810 0.14 2.83 3.07 4.92
6.65
46.038 30.162 1.8 171.450 7.137 3.5 86.0 92.0 153.0 102 18.4 0.0984 4.83
1.8125 1.1875 0.07 6.7500 0.2810 0.14 3.39 3.62 6.03
10.64
36.678 30.162 -9.4 130.073 6.350 3.5 71.0 77.0 116.0 91 21.1 0.1108 2.09
1.4440 1.1875 -0.37 5.1210 0.2500 0.14 2.80 3.03 4.57
4.61
33.338 23.812 5.3 136.525 6.350 3.5 74.0 91.0 123.5 56.4 16.5 0.0842 2.13
1.3125 0.9375 0.21 5.3750 0.2500 0.14 2.91 3.58 4.87
4.68
22.000 15.875 -1.5 109.433 4.762 2.0 69.0 73.0 102.0 51.7 19.5 0.0947 0.72
0.8661 0.6250 -0.06 4.3084 0.1875 0.08 2.72 2.87 4.02
1.59
25.400 19.050 -0.8 111.816 3.970 3.5 71.0 77.0 105.0 70.3 25.8 0.1112 0.96
1.0000 0.7500 -0.03 4.4022 0.1563 0.14 2.80 3.03 4.13
2.11
21.996 23.812 -0.8 117.373 4.762 3.5 70.0 77.0 108.0 56 21.4 0.0984 1.05
0.8660 0.9375 -0.03 4.6210 0.1875 0.14 2.76 3.03 4.25
2.31
30.048 23.812 -4.6 117.373 4.762 3.5 71.0 77.0 108.0 75.2 21.3 0.1092 1.26
1.1830 0.9375 -0.18 4.6210 0.1875 0.14 2.80 3.03 4.25
2.78
29.007 24.237 -4.1 125.435 5.537 0.8 72.0 73.0 115.0 77.2 23 0.1083 1.52
1.1420 0.9542 -0.16 4.9384 0.2180 0.03 2.83 2.87 4.53
3.35
29.007 24.237 -4.1 125.435 5.537 3.5 72.0 78.0 115.0 77.2 23 0.1083 1.51
1.1420 0.9542 -0.16 4.9384 0.2180 0.14 2.83 3.07 4.53
3.32
36.678 30.162 -9.4 130.073 6.350 3.5 72.0 78.0 116.0 91 21.1 0.1108 2.04
1.4440 1.1875 -0.37 5.1210 0.2500 0.14 2.83 3.07 4.57
4.51
36.170 28.575 -8.1 133.248 6.350 3.5 73.0 80.0 121.0 101 24 0.1167 2.16
1.4240 1.1250 -0.32 5.2460 0.2500 0.14 2.87 3.15 4.76
4.76
41.275 31.750 -10.9 143.637 7.112 3.5 78.0 82.0 130.0 113 22.8 0.0827 2.95
1.6250 1.2500 -0.43 5.6550 0.2800 0.14 3.07 3.23 5.12
6.50
41.275 31.750 -11.2 143.561 7.137 3.5 74.0 81.0 125.0 106 21 0.0814 2.92
1.6250 1.2500 -0.44 5.6520 0.2810 0.14 2.91 3.19 4.92
6.43
54.229 44.450 -15.0 157.061 7.938 3.5 80.0 86.0 140.0 158 29.1 0.0931 4.94
2.1350 1.7500 -0.59 6.1835 0.3125 0.14 3.15 3.39 5.51
10.90
54.229 44.450 -15.0 157.061 7.938 3.5 81.0 87.0 140.0 158 29.1 0.0931 4.88
2.1350 1.7500 -0.59 6.1835 0.3125 0.14 3.19 3.43 5.51
10.76
36.170 28.575 -8.1 133.248 6.350 3.5 74.0 81.0 121.0 101 24 0.1167 2.12
1.4240 1.1250 -0.32 5.2460 0.2500 0.14 2.91 3.19 4.76
4.67
29.007 24.237 -4.1 125.435 5.537 2.3 73.0 77.0 115.0 77.2 23 0.1083 1.48
1.1420 0.9542 -0.16 4.9384 0.2180 0.09 2.87 3.03 4.53
3.26
56.007 44.450 -19.3 143.579 7.938 3.5 77.0 84.0 126.0 124 22.4 0.0827 3.74
2.2050 1.7500 -0.76 5.6527 0.3125 0.14 3.04 3.31 4.96
8.24
43.764 36.512 -12.2 128.588 6.350 3.5 77.0 83.0 118.0 110 24.2 0.0825 2.29
1.7230 1.4375 -0.48 5.0625 0.2500 0.14 3.03 3.27 4.65
5.05
25.400 19.050 -0.8 111.816 3.970 3.5 73.0 80.0 105.0 70.3 25.8 0.1112 0.89
1.0000 0.7500 -0.03 4.4022 0.1563 0.14 2.87 3.15 4.13
1.97
30.048 23.812 -4.6 117.373 4.762 3.5 74.0 80.0 108.0 75.2 21.3 0.1092 1.19
1.1830 0.9375 -0.18 4.6210 0.1875 0.14 2.91 3.15 4.25
2.61
29.007 24.237 -4.1 125.435 5.537 2.3 74.0 78.0 115.0 77.2 23 0.1083 1.44
1.1420 0.9542 -0.16 4.9384 0.2180 0.09 2.91 3.07 4.53
3.17
36.678 30.162 -9.4 130.073 6.350 3.5 75.0 81.0 116.0 91 21.1 0.1108 1.95
1.4440 1.1875 -0.37 5.1210 0.2500 0.14 2.95 3.19 4.57
4.30
36.512 26.988 -3.8 138.200 10.340 3.5 82.0 88.0 124.0 91.7 24.3 0.1252 2.26
1.4375 1.0625 -0.15 5.4410 0.4071 0.14 3.23 3.46 4.88
4.98
56.007 44.450 -19.3 143.579 7.938 4.3 77.0 87.0 126.0 124 22.4 0.0827 3.66
2.2050 1.7500 -0.76 5.6527 0.3125 0.17 3.04 3.43 4.96
8.07
41.275 31.750 -11.2 143.561 7.137 3.5 77.0 83.0 125.0 106 21 0.0814 2.81
1.6250 1.2500 -0.44 5.6520 0.2810 0.14 3.03 3.27 4.92
6.20
46.038 36.512 -8.6 152.400 7.938 3.5 85.0 91.0 135.0 147 32.8 0.0993 3.67
1.8125 1.4375 -0.34 6.0000 0.3125 0.14 3.35 3.58 5.31
8.08
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B219
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF
SINGLE-ROW
T 1
a
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
68.262 110.000 7.925 91600 0.40 1.49 23700 16300 1.45 125000 399A 394AB
2.6875 4.3307 0.3120 20600 5340 3670 28100
68.262 120.000 11.095 133000 0.38 1.56 34400 22700 1.52 186000 480 472-B
2.6875 4.7244 0.4368 29900 7740 5100 41900
68.262 127.000 14.288 182000 0.36 1.65 47100 29400 1.61 262000 570 563-B
2.6875 5.0000 0.5625 40900 10600 6600 58900
68.262 136.525 16.662 216000 0.36 1.66 55900 34700 1.61 298000 642 632-B
2.6875 5.3750 0.6560 48500 12600 7790 67000
68.262 161.925 24.600 275000 0.71 0.85 71400 86700 0.82 330000 9278 9221-B
2.6875 6.3750 0.9685 61900 16100 19500 74200
69.850 112.712 10.320 102000 0.49 1.23 26500 22100 1.20 166000 29675 29620-B
2.7500 4.4375 0.4063 23000 5960 4980 37200
69.850 112.712 11.112 93400 0.42 1.44 24200 17300 1.40 130000 LM613449 LM613410-B
2.7500 4.4375 0.4375 21000 5450 3880 29300
69.850 120.000 11.095 133000 0.38 1.56 34400 22700 1.52 186000 482 472-B
2.7500 4.7244 0.4368 29900 7740 5100 41900
69.850 127.000 14.288 182000 0.36 1.65 47100 29400 1.61 262000 566 563-B
2.7500 5.0000 0.5625 40900 10600 6600 58900
69.850 136.525 16.662 216000 0.36 1.66 55900 34700 1.61 298000 643 632-B
2.7500 5.3750 0.6560 48500 12600 7790 67000
69.850 149.225 17.462 321000 0.36 1.66 83300 51600 1.61 463000 6454 6420-B
2.7500 5.8750 0.6875 72200 18700 11600 104000
69.850 150.089 15.875 294000 0.33 1.84 76300 42500 1.80 417000 745A 742-B
2.7500 5.9090 0.6250 66100 17100 9550 93800
69.850 152.400 16.667 229000 0.41 1.47 59300 41500 1.43 335000 655 652-B
2.7500 6.0000 0.6562 51400 13300 9330 75300
69.850 168.275 22.225 379000 0.30 2.00 98200 50300 1.95 522000 835 832-B
2.7500 6.6250 0.8750 85100 22100 11300 117000
69.952 122.238 7.938 94600 0.45 1.33 24500 18900 1.30 136000 34274 34481-B
2.7540 4.8125 0.3125 21300 5510 4260 30600
70.000 110.000 8.500 84800 0.46 1.30 22000 17400 1.27 112000 JP7049 JP7010-B
2.7559 4.3307 0.3346 19100 4940 3900 25200
70.000 120.000 11.095 133000 0.38 1.56 34400 22700 1.52 186000 484 472-B
2.7559 4.7244 0.4368 29900 7740 5100 41900
70.000 122.238 7.938 94600 0.45 1.33 24500 18900 1.30 136000 34275 34481-B
2.7559 4.8125 0.3125 21300 5510 4260 30600
71.438 117.475 11.112 128000 0.44 1.38 33200 24800 1.34 197000 33281 33462-B
2.8125 4.6250 0.4375 28800 7470 5570 44300
71.438 127.000 14.288 182000 0.36 1.65 47100 29400 1.61 262000 567A 563-B
2.8125 5.0000 0.5625 40900 10600 6600 58900
71.438 136.525 16.637 252000 0.36 1.67 65400 40300 1.62 335000 H414249 H414210-B
2.8125 5.3750 0.6550 56700 14700 9060 75400
71.438 136.525 16.662 216000 0.36 1.66 55900 34700 1.61 298000 645 632-B
2.8125 5.3750 0.6560 48500 12600 7790 67000
71.438 139.700 17.462 249000 0.47 1.27 64600 52300 1.24 405000 H715345 H715310-B
2.8125 5.5000 0.6875 56000 14500 11800 91000
73.025 112.712 10.320 102000 0.49 1.23 26500 22100 1.20 166000 29685 29620-B
2.8750 4.4375 0.4063 23000 5960 4980 37200
73.025 117.475 11.112 109000 0.51 1.18 28300 24700 1.15 183000 LM814845 LM814810-B
2.8750 4.6250 0.4375 24500 6360 5550 41200
73.025 127.000 14.288 182000 0.36 1.65 47100 29400 1.61 262000 567 563-B
2.8750 5.0000 0.5625 40900 10600 6600 58900
73.025 127.000 14.288 182000 0.36 1.65 47100 29400 1.61 262000 567X 563-B
2.8750 5.0000 0.5625 40900 10600 6600 58900
73.025 149.225 17.462 321000 0.36 1.66 83300 51600 1.61 463000 6460 6420-B
2.8750 5.8750 0.6875 72200 18700 11600 104000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
B
Caption:
Caption:
C 2
C
d B
D 1
D
R
d b D a
d a
•
B220 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
21.996 18.825 -0.8 114.673 4.750 2.3 74.0 78.0 106.0 56 21.4 0.0984 0.78
0.8660 0.7411 -0.03 4.5147 0.1870 0.09 2.91 3.07 4.17
1.73
29.007 24.237 -4.1 125.435 5.537 3.5 75.0 82.0 115.0 77.2 23 0.1083 1.40
1.1420 0.9542 -0.16 4.9384 0.2180 0.14 2.95 3.23 4.53
3.08
36.170 28.575 -8.1 133.248 6.350 3.5 77.0 83.0 121.0 101 24 0.1167 2.02
1.4240 1.1250 -0.32 5.2460 0.2500 0.14 3.03 3.27 4.76
4.45
41.275 31.750 -11.2 143.561 7.137 3.5 78.0 85.0 125.0 106 21 0.0814 2.76
1.6250 1.2500 -0.44 5.6520 0.2810 0.14 3.07 3.35 4.92
6.08
46.038 30.162 0.0 171.450 7.137 3.5 90.5 97.0 153.0 102 18.4 0.0984 4.59
1.8125 1.1875 0.00 6.7500 0.2810 0.14 3.56 3.82 6.03
10.12
25.400 19.050 1.0 116.586 3.970 1.5 77.0 80.0 110.0 77.7 43.3 0.1170 1.00
1.0000 0.7500 0.04 4.5900 0.1563 0.06 3.03 3.15 4.33
2.20
21.996 15.875 0.0 119.062 4.762 1.5 76.0 78.0 110.0 60.3 23.1 0.1019 0.83
0.8660 0.6250 0.00 4.6875 0.1875 0.06 2.99 3.07 4.33
1.82
29.007 24.237 -4.1 125.435 5.537 3.5 77.0 83.0 115.0 77.2 23 0.1083 1.36
1.1420 0.9542 -0.16 4.9384 0.2180 0.14 3.03 3.27 4.53
2.99
36.170 28.575 -8.1 133.248 6.350 3.5 78.0 85.0 121.0 101 24 0.1167 1.97
1.4240 1.1250 -0.32 5.2460 0.2500 0.14 3.07 3.35 4.76
4.34
41.275 31.750 -11.2 143.561 7.137 3.5 80.0 86.0 125.0 106 21 0.0814 2.70
1.6250 1.2500 -0.44 5.6520 0.2810 0.14 3.15 3.39 4.92
5.96
54.229 44.450 -15.0 157.061 7.938 5.0 85.0 94.0 140.0 158 29.1 0.0931 4.65
2.1350 1.7500 -0.59 6.1835 0.3125 0.20 3.35 3.70 5.51
10.25
46.672 36.512 -11.9 157.912 7.938 3.5 82.0 88.0 143.0 160 26.3 0.0898 4.02
1.8375 1.4375 -0.47 6.2170 0.3125 0.14 3.23 3.46 5.63
8.87
41.275 31.750 -7.9 159.441 7.142 3.5 82.0 88.0 141.0 137 27.3 0.0919 3.70
1.6250 1.2500 -0.31 6.2772 0.2812 0.14 3.23 3.46 5.55
8.16
56.363 41.275 -18.5 177.698 9.525 3.5 84.0 91.0 155.0 198 34.8 0.0937 6.28
2.2190 1.6250 -0.73 6.9960 0.3750 0.14 3.31 3.58 6.10
13.84
23.012 21.430 1.5 126.901 4.762 2.0 78.0 81.0 118.0 69.3 27 0.1093 1.18
0.9060 0.8437 0.06 4.9961 0.1875 0.08 3.07 3.19 4.65
2.60
20.000 15.500 2.5 116.000 3.000 2.0 76.0 80.0 105.5 51.1 30.9 0.0995 0.70
0.7874 0.6102 0.10 4.5669 0.1181 0.08 2.99 3.15 4.15
1.55
29.007 24.237 -4.1 125.435 5.537 2.0 77.0 80.0 115.0 77.2 23 0.1083 1.36
1.1420 0.9542 -0.16 4.9384 0.2180 0.08 3.03 3.15 4.53
3.00
23.012 21.430 1.5 126.901 4.762 2.0 78.0 82.0 118.0 69.3 27 0.1093 1.18
0.9060 0.8437 0.06 4.9961 0.1875 0.08 3.07 3.23 4.65
2.60
30.162 23.812 -2.8 122.133 4.762 3.5 79.0 85.0 114.0 84.2 24.4 0.1162 1.29
1.1875 0.9375 -0.11 4.8084 0.1875 0.14 3.11 3.35 4.49
2.85
36.170 28.575 -8.1 133.248 6.350 3.5 80.0 86.0 121.0 101 24 0.1167 1.92
1.4240 1.1250 -0.32 5.2460 0.2500 0.14 3.15 3.39 4.76
4.23
41.275 31.750 -10.9 143.637 7.112 3.5 83.0 89.0 130.0 113 22.8 0.0827 2.68
1.6250 1.2500 -0.43 5.6550 0.2800 0.14 3.27 3.50 5.12
5.90
41.275 31.750 -11.2 143.561 7.137 6.4 81.0 93.0 125.0 106 21 0.0814 2.62
1.6250 1.2500 -0.44 5.6520 0.2810 0.25 3.19 3.66 4.92
5.77
46.038 36.512 -8.6 152.400 7.938 3.5 88.0 94.0 135.0 147 32.8 0.0993 3.48
1.8125 1.4375 -0.34 6.0000 0.3125 0.14 3.46 3.70 5.31
7.68
25.400 19.050 1.0 116.586 3.970 3.5 80.0 86.0 110.0 77.7 43.3 0.1170 0.92
1.0000 0.7500 0.04 4.5900 0.1563 0.14 3.15 3.39 4.33
2.03
25.400 19.050 2.3 122.133 4.762 3.5 81.0 87.0 116.0 88.6 36.6 0.1239 1.07
1.0000 0.7500 0.09 4.8084 0.1875 0.14 3.19 3.43 4.57
2.35
36.170 28.575 -8.1 133.248 6.350 3.5 81.0 88.0 121.0 101 24 0.1167 1.87
1.4240 1.1250 -0.32 5.2460 0.2500 0.14 3.19 3.46 4.76
4.12
36.170 28.575 -8.1 133.248 6.350 4.8 81.0 90.0 121.0 101 24 0.1167 1.87
1.4240 1.1250 -0.32 5.2460 0.2500 0.19 3.19 3.54 4.76
4.13
54.229 44.450 -15.0 157.061 7.938 3.5 87.0 93.0 140.0 158 29.1 0.0931 4.51
2.1350 1.7500 -0.59 6.1835 0.3125 0.14 3.43 3.66 5.51
9.94
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B221
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF
SINGLE-ROW
T 1
a
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
73.025 152.400 16.667 229000 0.41 1.47 59300 41500 1.43 335000 657 652-B
2.8750 6.0000 0.6562 51400 13300 9330 75300
73.817 127.000 14.288 182000 0.36 1.65 47100 29400 1.61 262000 568 563-B
2.9062 5.0000 0.5625 40900 10600 6600 58900
74.612 139.992 14.288 191000 0.40 1.49 49600 34300 1.45 291000 577 572-B
2.9375 5.5115 0.5625 43000 11200 7720 65400
76.200 122.238 7.938 94600 0.45 1.33 24500 18900 1.30 136000 34300 34481-B
3.0000 4.8125 0.3125 21300 5510 4260 30600
76.200 122.238 7.940 94600 0.45 1.33 24500 18900 1.30 136000 34301 34481-B
3.0000 4.8125 0.3126 21300 5510 4260 30600
76.200 125.412 10.317 109000 0.42 1.44 28100 20000 1.40 178000 27684 27620-B
3.0000 4.9375 0.4062 24400 6320 4500 39900
76.200 130.000 13.495 149000 0.42 1.43 38700 27700 1.39 222000 42687 42623-B
3.0000 5.1181 0.5313 33500 8690 6230 49800
76.200 136.525 13.475 143000 0.44 1.35 37100 28200 1.31 216000 495A 493-B
3.0000 5.3750 0.5305 32100 8330 6340 48600
76.200 139.992 14.288 191000 0.40 1.49 49600 34300 1.45 291000 575 572-B
3.0000 5.5115 0.5625 43000 11200 7720 65400
76.200 149.225 17.462 321000 0.36 1.66 83300 51600 1.61 463000 6461 6420-B
3.0000 5.8750 0.6875 72200 18700 11600 104000
76.200 161.925 17.450 303000 0.34 1.76 78500 45900 1.71 441000 755 752-B
3.0000 6.3750 0.6870 68100 17700 10300 99200
76.200 161.925 19.050 343000 0.40 1.50 89000 61000 1.46 523000 6575 6535-B
3.0000 6.3750 0.7500 77200 20000 13700 118000
76.200 161.925 24.600 275000 0.71 0.85 71400 86700 0.82 330000 9285 9221-B
3.0000 6.3750 0.9685 61900 16100 19500 74200
76.200 168.275 22.225 379000 0.30 2.00 98200 50300 1.95 522000 837 832-B
3.0000 6.6250 0.8750 85100 22100 11300 117000
77.788 117.475 11.112 109000 0.51 1.18 28300 24700 1.15 183000 LM814849 LM814810-B
3.0625 4.6250 0.4375 24500 6360 5550 41200
77.788 122.238 7.938 94600 0.45 1.33 24500 18900 1.30 136000 34306 34481-B
3.0625 4.8125 0.3125 21300 5510 4260 30600
77.788 127.000 13.495 149000 0.42 1.43 38700 27700 1.39 222000 42690 42620-B
3.0625 5.0000 0.5313 33500 8690 6230 49800
79.375 152.400 15.875 200000 0.44 1.36 51900 39200 1.32 319000 595A 592-B
3.1250 6.0000 0.6250 45000 11700 8820 71600
79.985 152.400 15.875 200000 0.44 1.36 51900 39200 1.32 319000 590 592-B
3.1490 6.0000 0.6250 45000 11700 8820 71600
80.000 125.000 10.500 105000 0.45 1.33 27200 21000 1.29 141000 JP8049 JP8010-B
3.1496 4.9213 0.4134 23600 6110 4730 31800
80.962 133.350 12.700 167000 0.40 1.48 43400 30000 1.44 262000 47681 47620-B
3.1875 5.2500 0.5000 37600 9750 6750 58900
80.962 136.525 13.475 143000 0.44 1.35 37100 28200 1.31 216000 496 493-B
3.1875 5.3750 0.5305 32100 8330 6340 48600
80.962 139.992 14.288 191000 0.40 1.49 49600 34300 1.45 291000 581 572-B
3.1875 5.5115 0.5625 43000 11200 7720 65400
80.962 168.275 22.225 379000 0.30 2.00 98200 50300 1.95 522000 838 832-B
3.1875 6.6250 0.8750 85100 22100 11300 117000
82.550 115.888 7.938 83500 0.31 1.95 21700 11400 1.90 147000 L116149 L116110-B
3.2500 4.5625 0.3125 18800 4870 2570 33100
82.550 125.412 10.317 109000 0.42 1.44 28100 20000 1.40 178000 27687 27620-B
3.2500 4.9375 0.4062 24400 6320 4500 39900
82.550 133.350 12.700 167000 0.40 1.48 43400 30000 1.44 262000 47685 47620-B
3.2500 5.2500 0.5000 37600 9750 6750 58900
82.550 133.350 12.700 167000 0.40 1.48 43400 30000 1.44 262000 47686 47620-B
3.2500 5.2500 0.5000 37600 9750 6750 58900
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
B
Caption:
Caption:
C 2
C
d B
D 1
D
R
d b D a
d a
•
B222 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
41.275 31.750 -7.9 159.441 7.142 3.5 85.0 91.0 141.0 137 27.3 0.0919 3.58
1.6250 1.2500 -0.31 6.2772 0.2812 0.14 3.35 3.58 5.55
7.90
36.170 28.575 -8.1 133.248 6.350 0.8 82.0 83.0 121.0 101 24 0.1167 1.86
1.4240 1.1250 -0.32 5.2460 0.2500 0.03 3.23 3.27 4.76
4.09
36.098 28.575 -5.3 146.240 6.350 3.5 85.0 91.0 134.0 126 32 0.1295 2.48
1.4212 1.1250 -0.21 5.7575 0.2500 0.14 3.35 3.58 5.28
5.47
23.012 21.430 1.5 126.901 4.762 2.0 83.0 86.0 118.0 69.3 27 0.1093 1.05
0.9060 0.8437 0.06 4.9961 0.1875 0.08 3.27 3.39 4.65
2.32
23.012 21.430 1.5 126.901 4.762 3.5 83.0 89.0 118.0 69.3 27 0.1093 1.04
0.9060 0.8437 0.06 4.9961 0.1875 0.14 3.27 3.50 4.65
2.30
25.400 19.845 0.5 130.076 4.762 3.5 84.0 91.0 123.0 98.2 41.8 0.1198 1.25
1.0000 0.7813 0.02 5.1211 0.1875 0.14 3.31 3.58 4.84
2.76
31.000 22.225 -2.8 135.456 5.558 3.5 84.0 90.0 124.0 96.2 28.6 0.1197 1.62
1.2205 0.8750 -0.11 5.3329 0.2188 0.14 3.31 3.54 4.88
3.58
29.769 22.225 -0.8 141.961 5.537 3.5 86.0 92.0 131.0 105 29.3 0.1252 1.85
1.1720 0.8750 -0.03 5.5890 0.2180 0.14 3.39 3.62 5.16
4.09
36.098 28.575 -5.3 146.240 6.350 3.5 86.0 92.0 134.0 126 32 0.1295 2.43
1.4212 1.1250 -0.21 5.7575 0.2500 0.14 3.39 3.62 5.28
5.35
54.229 44.450 -15.0 157.061 7.938 3.5 89.5 96.0 140.0 158 29.1 0.0931 4.35
2.1350 1.7500 -0.59 6.1835 0.3125 0.14 3.52 3.78 5.51
9.59
48.260 38.100 -11.9 169.748 7.925 3.5 88.0 95.0 150.0 177 29.4 0.0945 4.82
1.9000 1.5000 -0.47 6.6830 0.3120 0.14 3.46 3.74 5.91
10.63
55.100 42.862 -13.2 171.450 7.938 6.4 92.0 104.0 155.0 199 33.5 0.1037 5.43
2.1693 1.6875 -0.52 6.7500 0.3125 0.25 3.62 4.09 6.10
11.98
46.038 30.162 0.0 171.450 7.137 3.5 90.5 103.0 153.0 102 18.4 0.0984 4.27
1.8125 1.1875 0.00 6.7500 0.2810 0.14 3.56 4.06 6.03
9.40
56.363 41.275 -18.5 177.698 9.525 0.8 89.0 90.0 155.0 198 34.8 0.0937 5.97
2.2190 1.6250 -0.73 6.9960 0.3750 0.03 3.50 3.54 6.10
13.15
25.400 19.050 2.3 122.133 4.762 3.5 85.0 91.0 116.0 88.6 36.6 0.1239 0.95
1.0000 0.7500 0.09 4.8084 0.1875 0.14 3.35 3.58 4.57
2.11
23.012 21.430 1.5 126.901 4.762 3.5 84.0 90.0 118.0 69.3 27 0.1093 1.01
0.9060 0.8437 0.06 4.9961 0.1875 0.14 3.31 3.54 4.65
2.22
31.000 22.225 -2.8 133.248 5.558 3.5 85.0 91.0 124.0 96.2 28.6 0.1197 1.44
1.2205 0.8750 -0.11 5.2460 0.2188 0.14 3.35 3.58 4.88
3.18
36.322 30.162 -2.5 158.648 6.350 3.5 91.0 98.0 144.0 151 38.3 0.1416 3.19
1.4300 1.1875 -0.10 6.2460 0.2500 0.14 3.58 3.86 5.67
7.03
36.322 30.162 -2.5 158.648 6.350 3.5 91.0 98.0 144.0 151 38.3 0.1416 3.17
1.4300 1.1875 -0.10 6.2460 0.2500 0.14 3.58 3.86 5.67
6.98
22.500 17.500 2.3 132.000 4.000 2.0 86.0 89.0 129.0 69.7 37.4 0.1095 1.01
0.8858 0.6890 0.09 5.1969 0.1575 0.08 3.39 3.50 5.08
2.22
33.338 26.195 -4.3 138.811 5.558 3.5 89.0 95.0 130.0 119 29.2 0.1273 1.90
1.3125 1.0313 -0.17 5.4650 0.2188 0.14 3.50 3.74 5.12
4.18
29.769 22.225 -0.8 141.961 5.537 3.5 89.0 95.0 131.0 105 29.3 0.1252 1.72
1.1720 0.8750 -0.03 5.5890 0.2180 0.14 3.50 3.74 5.16
3.79
36.098 28.575 -5.3 146.240 6.350 3.5 90.0 96.0 134.0 126 32 0.1295 2.26
1.4212 1.1250 -0.21 5.7575 0.2500 0.14 3.54 3.78 5.28
4.98
56.363 41.275 -18.5 177.698 9.525 0.8 93.0 94.0 155.0 198 34.8 0.0937 5.71
2.2190 1.6250 -0.73 6.9960 0.3750 0.03 3.66 3.70 6.10
12.58
21.433 16.670 -1.3 119.855 3.970 1.5 88.0 90.0 113.0 97.2 64.3 0.1079 0.69
0.8438 0.6563 -0.05 4.7187 0.1563 0.06 3.46 3.54 4.45
1.52
25.400 19.845 0.5 130.076 4.762 3.5 89.0 96.0 123.0 98.2 41.8 0.1198 1.10
1.0000 0.7813 0.02 5.1211 0.1875 0.14 3.50 3.78 4.84
2.41
33.338 26.195 -4.3 138.811 5.558 0.8 90.0 91.0 130.0 119 29.2 0.1273 1.86
1.3125 1.0313 -0.17 5.4650 0.2188 0.03 3.54 3.58 5.12
4.09
33.338 26.195 -4.3 138.811 5.558 3.5 90.0 97.0 130.0 119 29.2 0.1273 1.84
1.3125 1.0313 -0.17 5.4650 0.2188 0.14 3.54 3.82 5.12
4.06
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B223
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF
SINGLE-ROW
T 1
a
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
82.550 136.525 13.475 143000 0.44 1.35 37100 28200 1.31 216000 495 493-B
3.2500 5.3750 0.5305 32100 8330 6340 48600
82.550 139.992 14.288 191000 0.40 1.49 49600 34300 1.45 291000 580 572-B
3.2500 5.5115 0.5625 43000 11200 7720 65400
82.550 152.400 15.875 200000 0.44 1.36 51900 39200 1.32 319000 595 592-B
3.2500 6.0000 0.6250 45000 11700 8820 71600
82.550 152.400 16.667 229000 0.41 1.47 59300 41500 1.43 335000 663 652-B
3.2500 6.0000 0.6562 51400 13300 9330 75300
82.550 161.925 17.450 303000 0.34 1.76 78500 45900 1.71 441000 757 752-B
3.2500 6.3750 0.6870 68100 17700 10300 99200
82.550 168.275 22.225 379000 0.30 2.00 98200 50300 1.95 522000 839 832-B
3.2500 6.6250 0.8750 85100 22100 11300 117000
82.550 168.275 22.225 379000 0.30 2.00 98200 50300 1.95 522000 842 832-B
3.2500 6.6250 0.8750 85100 22100 11300 117000
83.345 125.412 10.317 109000 0.42 1.44 28100 20000 1.40 178000 27690 27620-B
3.2813 4.9375 0.4062 24400 6320 4500 39900
84.138 136.525 13.475 143000 0.44 1.35 37100 28200 1.31 216000 498 493-B
3.3125 5.3750 0.5305 32100 8330 6340 48600
85.000 130.000 11.560 149000 0.44 1.35 38700 29400 1.31 245000 JM716649 JM716610-B
3.3465 5.1181 0.4550 33600 8700 6620 55100
85.725 136.525 13.475 143000 0.44 1.35 37100 28200 1.31 216000 497 493-B
3.3750 5.3750 0.5305 32100 8330 6340 48600
85.725 152.400 15.875 200000 0.44 1.36 51900 39200 1.32 319000 596 592-B
3.3750 6.0000 0.6250 45000 11700 8820 71600
85.725 152.400 16.667 229000 0.41 1.47 59300 41500 1.43 335000 665 652-B
3.3750 6.0000 0.6562 51400 13300 9330 75300
85.725 161.925 17.450 303000 0.34 1.76 78500 45900 1.71 441000 758 752-B
3.3750 6.3750 0.6870 68100 17700 10300 99200
85.725 168.275 18.255 245000 0.47 1.28 63500 51200 1.24 386000 677 672-B
3.3750 6.6250 0.7187 55100 14300 11500 86700
85.725 168.275 22.225 379000 0.30 2.00 98200 50300 1.95 522000 841 832-B
3.3750 6.6250 0.8750 85100 22100 11300 117000
87.312 152.400 15.875 200000 0.44 1.36 51900 39200 1.32 319000 596-S 592-B
3.4375 6.0000 0.6250 45000 11700 8820 71600
88.900 149.225 12.700 151000 0.49 1.22 39100 33000 1.19 241000 42350 42587-B
3.5000 5.8750 0.5000 33900 8790 7410 54300
88.900 152.400 15.875 200000 0.44 1.36 51900 39200 1.32 319000 593 592-B
3.5000 6.0000 0.6250 45000 11700 8820 71600
88.900 161.925 17.450 303000 0.34 1.76 78500 45900 1.71 441000 766 752-B
3.5000 6.3750 0.6870 68100 17700 10300 99200
88.900 161.925 17.462 303000 0.34 1.76 78500 45900 1.71 441000 759 752-B
3.5000 6.3750 0.6875 68100 17700 10300 99200
88.900 161.925 19.050 343000 0.40 1.50 89000 61000 1.46 523000 6580 6535-B
3.5000 6.3750 0.7500 77200 20000 13700 118000
88.900 168.275 18.255 245000 0.47 1.28 63500 51200 1.24 386000 679 672-B
3.5000 6.6250 0.7187 55100 14300 11500 86700
88.900 180.975 17.462 320000 0.39 1.56 83100 54800 1.51 495000 775 772-B
3.5000 7.1250 0.6875 72000 18700 12300 111000
88.900 190.500 22.225 424000 0.33 1.79 110000 63000 1.74 630000 855 854-B
3.5000 7.5000 0.8750 95300 24700 14200 142000
88.900 190.500 22.225 494000 0.33 1.79 128000 73400 1.74 692000 HH221434 HH221410-B
3.5000 7.5000 0.8750 111000 28800 16500 156000
88.900 200.000 27.361 376000 0.63 0.95 97500 106000 0.92 519000 98350 98788-B
3.5000 7.8740 1.0772 84600 21900 23700 117000
90.000 135.000 10.500 110000 0.49 1.21 28400 24000 1.18 155000 JP9049 JP9010-B
3.5433 5.3150 0.4134 24600 6390 5410 34900
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
B
Caption:
Caption:
C 2
C
d B
D 1
D
R
d b D a
d a
•
B224 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
29.769 22.225 -0.8 141.961 5.537 3.5 90.0 97.0 131.0 105 29.3 0.1252 1.67
1.1720 0.8750 -0.03 5.5890 0.2180 0.14 3.54 3.82 5.16
3.68
36.098 28.575 -5.3 146.240 6.350 3.5 91.0 98.0 134.0 126 32 0.1295 2.21
1.4212 1.1250 -0.21 5.7575 0.2500 0.14 3.58 3.86 5.28
4.86
36.322 30.162 -2.5 158.648 6.350 3.5 93.0 100.0 144.0 151 36.8 0.1416 3.07
1.4300 1.1875 -0.10 6.2460 0.2500 0.14 3.66 3.94 5.67
6.78
41.275 31.750 -7.9 159.441 7.142 3.5 92.0 99.0 141.0 137 27.3 0.0919 3.21
1.6250 1.2500 -0.31 6.2772 0.2812 0.14 3.62 3.90 5.55
7.07
48.260 38.100 -11.9 169.748 7.925 3.5 94.0 100.0 150.0 177 29.4 0.0945 4.52
1.9000 1.5000 -0.47 6.6830 0.3120 0.14 3.70 3.94 5.91
9.97
56.363 41.275 -18.5 177.698 9.525 0.8 94.0 95.0 155.0 198 34.8 0.0937 5.62
2.2190 1.6250 -0.73 6.9960 0.3750 0.03 3.70 3.74 6.10
12.38
56.363 41.275 -18.5 177.698 9.525 3.5 94.0 101.0 155.0 198 34.8 0.0937 5.60
2.2190 1.6250 -0.73 6.9960 0.3750 0.14 3.70 3.98 6.10
12.35
25.400 19.845 0.5 130.076 4.762 3.5 90.0 96.0 123.0 98.2 41.8 0.1198 1.07
1.0000 0.7813 0.02 5.1211 0.1875 0.14 3.54 3.78 4.84
2.37
29.769 22.225 -0.8 141.961 5.537 3.5 91.0 98.0 131.0 105 29.3 0.1252 1.62
1.1720 0.8750 -0.03 5.5890 0.2180 0.14 3.58 3.86 5.16
3.57
29.000 24.000 -0.3 135.448 5.558 3.0 92.0 98.0 127.0 117 36.6 0.1303 1.40
1.1417 0.9449 -0.01 5.3346 0.2188 0.12 3.62 3.86 5.00
3.09
29.769 22.225 -0.8 141.961 5.537 3.5 93.0 99.0 131.0 105 29.3 0.1252 1.57
1.1720 0.8750 -0.03 5.5890 0.2180 0.14 3.66 3.90 5.16
3.46
36.322 30.162 -2.5 158.648 6.350 3.5 96.0 102.0 144.0 151 36.8 0.1416 2.95
1.4300 1.1875 -0.10 6.2460 0.2500 0.14 3.78 4.02 5.67
6.51
41.275 31.750 -7.9 159.441 7.142 3.5 95.0 102.0 141.0 137 27.3 0.0919 3.07
1.6250 1.2500 -0.31 6.2772 0.2812 0.14 3.74 4.02 5.55
6.77
48.260 38.100 -11.9 169.748 7.925 3.5 97.0 103.0 150.0 177 29.4 0.0945 4.37
1.9000 1.5000 -0.47 6.6830 0.3120 0.14 3.82 4.06 5.91
9.62
41.275 30.162 -2.8 175.336 7.142 3.5 99.0 105.0 160.0 182 37.2 0.1056 4.23
1.6250 1.1875 -0.11 6.9030 0.2812 0.14 3.90 4.13 6.30
9.33
56.363 41.275 -18.5 177.698 9.525 3.5 97.0 104.0 155.0 198 34.8 0.0937 5.42
2.2190 1.6250 -0.73 6.9960 0.3750 0.14 3.82 4.09 6.10
11.95
36.322 30.162 -2.5 158.648 6.350 3.5 97.0 103.0 144.0 151 38.3 0.1416 2.89
1.4300 1.1875 -0.10 6.2460 0.2500 0.14 3.82 4.06 5.67
6.38
28.971 24.608 3.0 154.681 5.558 3.0 98.0 104.0 152.0 130 37.2 0.1386 2.13
1.1406 0.9688 0.12 6.0898 0.2188 0.12 3.86 4.09 5.98
4.70
36.322 30.162 -2.5 158.648 6.350 3.5 98.0 104.0 144.0 151 36.8 0.1416 2.83
1.4300 1.1875 -0.10 6.2460 0.2500 0.14 3.86 4.09 5.67
6.24
48.260 38.100 -11.9 169.748 7.925 7.0 99.0 113.0 150.0 177 29.4 0.0945 4.16
1.9000 1.5000 -0.47 6.6830 0.3120 0.28 3.90 4.45 5.91
9.16
48.260 38.100 -11.9 169.748 7.925 3.5 99.0 106.0 150.0 177 29.4 0.0945 4.20
1.9000 1.5000 -0.47 6.6830 0.3120 0.14 3.90 4.17 5.91
9.26
55.100 42.862 -13.2 171.450 7.938 3.5 102.0 109.0 155.0 199 33.5 0.1037 4.75
2.1693 1.6875 -0.52 6.7500 0.3125 0.14 4.01 4.29 6.10
10.47
41.275 30.162 -2.8 175.336 7.142 3.5 101.0 107.0 160.0 182 37.2 0.1056 4.09
1.6250 1.1875 -0.11 6.9030 0.2812 0.14 3.98 4.21 6.30
9.02
48.006 38.100 -8.1 188.798 7.938 4.8 103.0 112.0 168.0 227 41.3 0.1067 5.89
1.8900 1.5000 -0.32 7.4330 0.3125 0.19 4.06 4.41 6.61
12.98
57.531 44.450 -15.2 199.923 9.525 8.0 103.0 118.0 174.0 264 44.9 0.1072 7.89
2.2650 1.7500 -0.60 7.8710 0.3750 0.31 4.06 4.65 6.85
17.39
57.531 46.038 -15.0 199.923 11.112 8.0 105.0 120.0 179.0 266 28.4 0.1072 8.33
2.2650 1.8125 -0.59 7.8710 0.4375 0.31 4.13 4.72 7.05
18.36
49.212 34.925 1.3 209.550 9.525 3.5 112.0 118.0 188.0 203 37.4 0.1197 7.72
1.9375 1.3750 0.05 8.2500 0.3750 0.14 4.41 4.65 7.40
17.02
22.500 17.500 5.6 142.000 4.000 2.0 97.0 100.0 133.0 83.8 46 0.1196 1.14
0.8858 0.6890 0.22 5.5906 0.1575 0.08 3.82 3.94 5.24
2.51
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B225
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF
SINGLE-ROW
T 1
a
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
90.488 161.925 17.450 303000 0.34 1.76 78500 45900 1.71 441000 760 752-B
3.5625 6.3750 0.6870 68100 17700 10300 99200
92.075 142.875 15.080 182000 0.45 1.34 47300 36300 1.30 307000 47890 47825-B
3.6250 5.6250 0.5937 41000 10600 8160 69000
92.075 149.225 12.700 151000 0.49 1.22 39100 33000 1.19 241000 42362 42587-B
3.6250 5.8750 0.5000 33900 8790 7410 54300
92.075 152.400 15.875 200000 0.44 1.36 51900 39200 1.32 319000 598 592-B
3.6250 6.0000 0.6250 45000 11700 8820 71600
92.075 168.275 18.255 245000 0.47 1.28 63500 51200 1.24 386000 681 672-B
3.6250 6.6250 0.7187 55100 14300 11500 86700
93.662 149.225 12.700 151000 0.49 1.22 39100 33000 1.19 241000 42368 42587-B
3.6875 5.8750 0.5000 33900 8790 7410 54300
93.662 152.400 15.875 200000 0.44 1.36 51900 39200 1.32 319000 597 592-B
3.6875 6.0000 0.6250 45000 11700 8820 71600
95.250 142.875 15.080 182000 0.45 1.34 47300 36300 1.30 307000 47896 47825-B
3.7500 5.6250 0.5937 41000 10600 8160 69000
95.250 149.225 12.700 151000 0.49 1.22 39100 33000 1.19 241000 42375 42587-B
3.7500 5.8750 0.5000 33900 8790 7410 54300
95.250 152.400 15.875 200000 0.44 1.36 51900 39200 1.32 319000 594 592-B
3.7500 6.0000 0.6250 45000 11700 8820 71600
95.250 160.000 16.667 207000 0.47 1.26 53600 43600 1.23 343000 52375 52630XB
3.7500 6.2992 0.6562 46500 12100 9800 77000
95.250 161.925 16.667 207000 0.47 1.26 53600 43600 1.23 343000 52375 52637-B
3.7500 6.3750 0.6562 46500 12100 9800 77000
95.250 168.275 18.255 245000 0.47 1.28 63500 51200 1.24 386000 683 672-B
3.7500 6.6250 0.7187 55100 14300 11500 86700
95.250 171.450 17.462 315000 0.37 1.63 81500 51200 1.59 474000 77375 77675-B
3.7500 6.7500 0.6875 70700 18300 11500 107000
95.250 180.975 17.462 320000 0.39 1.56 83100 54800 1.51 495000 776 772-B
3.7500 7.1250 0.6875 72000 18700 12300 111000
95.250 180.975 17.462 320000 0.39 1.56 83100 54800 1.51 495000 777 772-B
3.7500 7.1250 0.6875 72000 18700 12300 111000
95.250 190.500 22.225 424000 0.33 1.79 110000 63000 1.74 630000 864 854-B
3.7500 7.5000 0.8750 95300 24700 14200 142000
95.250 190.500 22.225 494000 0.33 1.79 128000 73400 1.74 692000 HH221440 HH221410-B
3.7500 7.5000 0.8750 111000 28800 16500 156000
96.838 149.225 12.700 151000 0.49 1.22 39100 33000 1.19 241000 42381 42587-B
3.8125 5.8750 0.5000 33900 8790 7410 54300
98.425 161.925 16.667 207000 0.47 1.26 53600 43600 1.23 343000 52387 52637-B
3.8750 6.3750 0.6562 46500 12100 9800 77000
98.425 168.275 18.255 245000 0.47 1.28 63500 51200 1.24 386000 685 672-B
3.8750 6.6250 0.7187 55100 14300 11500 86700
98.425 180.975 17.462 320000 0.39 1.56 83100 54800 1.51 495000 779 772-B
3.8750 7.1250 0.6875 72000 18700 12300 111000
98.425 190.500 22.225 494000 0.33 1.79 128000 73400 1.74 692000 HH221442 HH221410-B
3.8750 7.5000 0.8750 111000 28800 16500 156000
98.425 212.725 23.812 630000 0.33 1.84 163000 91000 1.79 906000 HH224332 HH224310-B
3.8750 8.3750 0.9375 142000 36700 20500 204000
99.982 190.500 22.225 494000 0.33 1.79 128000 73400 1.74 692000 HH221447 HH221410-B
3.9363 7.5000 0.8750 111000 28800 16500 156000
100.000 145.000 10.500 116000 0.47 1.27 30100 24400 1.24 172000 JP10049 JP10010-B
3.9370 5.7087 0.4134 26100 6770 5480 38700
100.000 180.975 17.462 320000 0.39 1.56 83100 54800 1.51 495000 783 772-B
3.9370 7.1250 0.6875 72000 18700 12300 111000
101.600 157.162 16.667 207000 0.47 1.26 53600 43600 1.23 343000 52400 52618-B
4.0000 6.1875 0.6562 46500 12100 9800 77000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
B
Caption:
Caption:
C 2
C
d B
D 1
D
R
d b D a
d a
•
B226 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
48.260 38.100 -11.9 169.748 7.925 3.5 101.0 107.0 150.0 177 29.4 0.0945 4.12
1.9000 1.5000 -0.47 6.6830 0.3120 0.14 3.98 4.21 5.91
9.07
34.925 26.195 -1.0 149.123 7.938 3.5 101.0 107.0 142.0 153 38.1 0.1428 2.00
1.3750 1.0313 -0.04 5.8710 0.3125 0.14 3.98 4.21 5.59
4.41
28.971 24.608 3.0 154.681 5.558 3.5 101.0 107.0 152.0 130 37.2 0.1386 2.03
1.1406 0.9688 0.12 6.0898 0.2188 0.14 3.98 4.21 5.98
4.46
36.322 30.162 -2.5 158.648 6.350 3.5 101.0 107.0 144.0 151 36.8 0.1416 2.70
1.4300 1.1875 -0.10 6.2460 0.2500 0.14 3.98 4.21 5.67
5.96
41.275 30.162 -2.8 175.336 7.142 3.5 104.0 110.0 160.0 182 37.2 0.1056 3.94
1.6250 1.1875 -0.11 6.9030 0.2812 0.14 4.09 4.33 6.30
8.70
28.971 24.608 3.0 154.681 5.558 3.0 102.0 107.0 152.0 130 37.2 0.1386 1.98
1.1406 0.9688 0.12 6.0898 0.2188 0.12 4.02 4.21 5.98
4.36
36.322 30.162 -2.5 158.648 6.350 3.5 102.0 109.0 144.0 151 38.3 0.1416 2.64
1.4300 1.1875 -0.10 6.2460 0.2500 0.14 4.02 4.29 5.67
5.81
34.925 26.195 -1.0 149.123 7.938 3.5 103.0 110.0 142.0 153 38.1 0.1428 1.87
1.3750 1.0313 -0.04 5.8710 0.3125 0.14 4.06 4.33 5.59
4.13
28.971 24.608 3.0 154.681 5.558 3.0 103.0 108.0 152.0 130 37.2 0.1386 1.93
1.1406 0.9688 0.12 6.0898 0.2188 0.12 4.06 4.25 5.98
4.26
36.322 30.162 -2.5 158.648 6.350 3.5 104.0 110.0 144.0 151 36.8 0.1416 2.57
1.4300 1.1875 -0.10 6.2460 0.2500 0.14 4.09 4.33 5.67
5.66
36.116 26.195 -0.5 166.345 6.350 3.5 105.0 112.0 155.0 175 41.7 0.1519 2.91
1.4219 1.0313 -0.02 6.5490 0.2500 0.14 4.13 4.41 6.10
6.41
36.116 26.195 -0.5 168.173 6.350 3.5 105.0 112.0 155.0 175 41.7 0.1519 2.99
1.4219 1.0313 -0.02 6.6210 0.2500 0.14 4.13 4.41 6.10
6.59
41.275 30.162 -2.8 175.336 7.142 3.5 106.0 113.0 160.0 182 37.2 0.1056 3.79
1.6250 1.1875 -0.11 6.9030 0.2812 0.14 4.17 4.45 6.30
8.36
48.260 38.100 -9.7 179.283 7.938 3.5 106.0 113.0 161.0 206 37.7 0.1017 4.72
1.9000 1.5000 -0.38 7.0584 0.3125 0.14 4.17 4.45 6.34
10.40
48.006 38.100 -8.1 188.798 7.938 3.5 107.0 114.0 168.0 227 41.3 0.1067 5.55
1.8900 1.5000 -0.32 7.4330 0.3125 0.14 4.21 4.49 6.61
12.24
48.006 38.100 -8.1 188.798 7.938 9.7 107.0 126.0 168.0 227 41.3 0.1067 5.45
1.8900 1.5000 -0.32 7.4330 0.3125 0.38 4.21 4.96 6.61
12.03
57.531 44.450 -15.2 199.923 9.525 8.0 108.0 123.0 174.0 264 44.9 0.1072 7.47
2.2650 1.7500 -0.60 7.8710 0.3750 0.31 4.25 4.84 6.85
16.46
57.531 46.038 -15.0 199.923 11.112 8.0 110.0 125.0 179.0 266 28.4 0.1072 7.91
2.2650 1.8125 -0.59 7.8710 0.4375 0.31 4.33 4.92 7.05
17.44
28.971 24.608 3.0 154.681 5.558 3.5 104.0 110.0 152.0 130 37.2 0.1386 1.86
1.1406 0.9688 0.12 6.0898 0.2188 0.14 4.09 4.33 5.98
4.11
36.116 26.195 -0.5 168.173 6.350 3.5 108.0 114.0 155.0 175 41.7 0.1519 2.85
1.4219 1.0313 -0.02 6.6210 0.2500 0.14 4.25 4.49 6.10
6.28
41.275 30.162 -2.8 175.336 7.142 3.5 109.0 116.0 160.0 182 37.2 0.1056 3.64
1.6250 1.1875 -0.11 6.9030 0.2812 0.14 4.29 4.57 6.30
8.02
48.006 38.100 -8.1 188.798 7.938 3.5 110.0 116.0 168.0 227 41.3 0.1067 5.37
1.8900 1.5000 -0.32 7.4330 0.3125 0.14 4.33 4.57 6.61
11.84
57.531 46.038 -15.0 199.923 11.112 3.5 113.0 119.0 179.0 266 28.4 0.1072 7.75
2.2650 1.8125 -0.59 7.8710 0.4375 0.14 4.45 4.69 7.05
17.09
66.675 53.975 -18.8 223.733 11.112 3.5 119.0 123.0 204.0 367 47.8 0.1182 12.40
2.6250 2.1250 -0.74 8.8084 0.4375 0.14 4.69 4.84 8.03
27.34
57.531 46.038 -15.0 199.923 11.112 6.4 114.0 126.0 179.0 266 28.4 0.1072 7.61
2.2650 1.8125 -0.59 7.8710 0.4375 0.25 4.49 4.96 7.05
16.77
22.500 17.500 6.1 152.000 4.000 3.0 106.0 112.0 142.0 104 40.9 0.1264 1.18
0.8858 0.6890 0.24 5.9843 0.1575 0.12 4.17 4.41 5.59
2.61
48.006 38.100 -8.1 188.798 7.938 3.5 111.0 118.0 168.0 227 41.3 0.1067 5.28
1.8900 1.5000 -0.32 7.4330 0.3125 0.14 4.37 4.65 6.61
11.64
36.116 26.195 -5.1 163.512 6.350 3.5 111.0 117.0 155.0 175 41.7 0.1519 2.47
1.4219 1.0313 -0.20 6.4375 0.2500 0.14 4.37 4.61 6.10
5.45
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B227
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF
SINGLE-ROW
T 1
a
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
101.600 160.000 16.667 207000 0.47 1.26 53600 43600 1.23 343000 52400 52630XB
4.0000 6.2992 0.6562 46500 12100 9800 77000
101.600 161.925 16.667 207000 0.47 1.26 53600 43600 1.23 343000 52400 52637-B
4.0000 6.3750 0.6562 46500 12100 9800 77000
101.600 168.275 18.255 245000 0.47 1.28 63500 51200 1.24 386000 687 672-B
4.0000 6.6250 0.7187 55100 14300 11500 86700
101.600 180.975 17.462 320000 0.39 1.56 83100 54800 1.51 495000 780 772-B
4.0000 7.1250 0.6875 72000 18700 12300 111000
101.600 190.500 22.225 424000 0.33 1.79 110000 63000 1.74 630000 861 854-B
4.0000 7.5000 0.8750 95300 24700 14200 142000
101.600 190.500 22.225 494000 0.33 1.79 128000 73400 1.74 692000 HH221449 HH221410-B
4.0000 7.5000 0.8750 111000 28800 16500 156000
101.600 200.000 27.361 376000 0.63 0.95 97500 106000 0.92 519000 98400 98788-B
4.0000 7.8740 1.0772 84600 21900 23700 117000
101.600 212.725 23.812 530000 0.33 1.84 137000 76600 1.79 786000 941 932-B
4.0000 8.3750 0.9375 119000 30900 17200 177000
104.775 180.975 17.462 320000 0.39 1.56 83100 54800 1.51 495000 782 772-B
4.1250 7.1250 0.6875 72000 18700 12300 111000
104.775 190.500 20.638 337000 0.42 1.44 87300 62200 1.40 543000 71412 71750-B
4.1250 7.5000 0.8125 75700 19600 14000 122000
107.950 165.100 15.875 210000 0.50 1.21 54400 46300 1.18 355000 56425 56650-B
4.2500 6.5000 0.6250 47100 12200 10400 79700
107.950 190.500 20.638 337000 0.42 1.44 87300 62200 1.40 543000 71425 71750-B
4.2500 7.5000 0.8125 75700 19600 14000 122000
107.950 212.725 23.812 530000 0.33 1.84 137000 76600 1.79 786000 936 932-B
4.2500 8.3750 0.9375 119000 30900 17200 177000
107.950 212.725 23.812 630000 0.33 1.84 163000 91000 1.79 906000 HH224340 HH224310-B
4.2500 8.3750 0.9375 142000 36700 20500 204000
109.538 158.750 11.908 107000 0.61 0.99 27600 28700 0.96 179000 37431 37625-B
4.3125 6.2500 0.4688 24000 6220 6450 40100
109.992 177.800 18.258 254000 0.52 1.16 65900 58300 1.13 419000 64433 64700-B
4.3304 7.0000 0.7188 57200 14800 13100 94200
111.125 190.500 20.638 337000 0.42 1.44 87300 62200 1.40 543000 71437 71750-B
4.3750 7.5000 0.8125 75700 19600 14000 122000
114.300 177.800 18.258 254000 0.52 1.16 65900 58300 1.13 419000 64450 64700-B
4.5000 7.0000 0.7188 57200 14800 13100 94200
114.300 190.500 20.638 337000 0.42 1.44 87300 62200 1.40 543000 71450 71750-B
4.5000 7.5000 0.8125 75700 19600 14000 122000
114.300 212.725 23.812 530000 0.33 1.84 137000 76600 1.79 786000 938 932-B
4.5000 8.3750 0.9375 119000 30900 17200 177000
115.000 165.000 12.500 148000 0.46 1.31 38300 30100 1.27 245000 JLM722948 JLM722912-B
4.5276 6.4961 0.4921 33200 8620 6770 55100
117.475 180.975 16.667 181000 0.50 1.21 46900 39900 1.18 271000 68462 68712-B
4.6250 7.1250 0.6562 40700 10600 8980 61000
120.000 180.000 16.350 229000 0.41 1.45 59300 41900 1.41 377000 JM624649 JM624610-B
4.7244 7.0866 0.6437 51400 13300 9430 84700
120.650 160.338 8.733 97500 0.43 1.38 25300 18800 1.34 206000 L624549 L624510-B
4.7500 6.3125 0.3438 21900 5680 4230 46400
120.650 234.950 25.400 582000 0.37 1.62 151000 95500 1.58 931000 95475 95925-B
4.7500 9.2500 1.0000 131000 33900 21500 209000
123.825 182.562 12.700 248000 0.31 1.97 64300 33600 1.91 493000 48286 48220-B
4.8750 7.1875 0.5000 55800 14500 7550 111000
127.000 182.562 12.700 248000 0.31 1.97 64300 33600 1.91 493000 48290 48220-B
5.0000 7.1875 0.5000 55800 14500 7550 111000
127.000 215.900 20.638 354000 0.49 1.23 91700 76500 1.20 614000 74500 74850-B
5.0000 8.5000 0.8125 79500 20600 17200 138000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
B
Caption:
Caption:
C 2
C
d B
D 1
D
R
d b D a
d a
•
B228 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
36.116 26.195 -5.1 166.345 6.350 3.5 111.0 117.0 155.0 175 41.7 0.1519 2.64
1.4219 1.0313 -0.20 6.5490 0.2500 0.14 4.37 4.61 6.10
5.83
36.116 26.195 -5.1 168.173 6.350 3.5 111.0 117.0 155.0 175 41.7 0.1519 2.72
1.4219 1.0313 -0.20 6.6210 0.2500 0.14 4.37 4.61 6.10
6.01
41.275 30.162 -2.8 175.336 7.142 3.5 112.0 118.0 160.0 182 37.2 0.1056 3.48
1.6250 1.1875 -0.11 6.9030 0.2812 0.14 4.41 4.65 6.30
7.66
48.006 38.100 -8.1 188.798 7.938 3.5 113.0 119.0 168.0 227 38.2 0.1067 5.18
1.8900 1.5000 -0.32 7.4330 0.3125 0.14 4.45 4.69 6.61
11.43
57.531 44.450 -15.2 199.923 9.525 8.0 114.0 129.0 174.0 264 44.9 0.1072 7.02
2.2650 1.7500 -0.60 7.8710 0.3750 0.31 4.49 5.08 6.85
15.48
57.531 46.038 -15.0 199.923 11.112 8.0 116.0 131.0 179.0 266 28.4 0.1072 7.46
2.2650 1.8125 -0.59 7.8710 0.4375 0.31 4.56 5.16 7.05
16.45
49.212 34.925 1.3 209.550 9.525 3.5 120.5 128.0 188.0 203 37.4 0.1197 6.99
1.9375 1.3750 0.05 8.2500 0.3750 0.14 4.75 5.04 7.40
15.40
66.675 53.975 -19.8 223.736 11.112 7.0 117.0 130.0 199.0 339 39.7 0.1153 11.31
2.6250 2.1250 -0.78 8.8085 0.4375 0.28 4.61 5.12 7.83
24.93
48.006 38.100 -8.1 188.798 7.938 3.5 116.0 122.0 168.0 227 38.2 0.1067 4.99
1.8900 1.5000 -0.32 7.4330 0.3125 0.14 4.57 4.80 6.61
11.00
49.212 34.925 -6.6 198.323 7.937 3.5 118.0 124.0 181.0 269 45.7 0.1156 5.94
1.9375 1.3750 -0.26 7.8080 0.3125 0.14 4.65 4.88 7.13
13.09
36.512 26.988 2.0 171.348 6.350 3.5 117.0 123.0 162.0 191 47.7 0.1584 2.73
1.4375 1.0625 0.08 6.7460 0.2500 0.14 4.61 4.84 6.38
6.01
49.212 34.925 -6.6 198.323 7.937 3.5 120.0 126.0 181.0 269 45.7 0.1156 5.73
1.9375 1.3750 -0.26 7.8080 0.3125 0.14 4.72 4.96 7.13
12.64
66.675 53.975 -19.8 223.736 11.112 8.0 122.0 137.0 199.0 339 39.7 0.1153 10.74
2.6250 2.1250 -0.78 8.8085 0.4375 0.31 4.80 5.39 7.83
23.69
66.675 53.975 -18.8 223.733 11.112 8.0 126.0 139.0 204.0 367 47.8 0.1182 11.53
2.6250 2.1250 -0.74 8.8084 0.4375 0.31 4.96 5.47 8.03
25.41
21.438 15.875 13.7 163.413 4.762 3.5 116.0 123.0 153.0 124 48.7 0.1443 1.38
0.8440 0.6250 0.54 6.4336 0.1875 0.14 4.57 4.84 6.02
3.05
41.275 30.162 1.3 184.841 7.145 3.5 121.0 128.0 174.0 219 45.3 0.1153 3.92
1.6250 1.1875 0.05 7.2772 0.2813 0.14 4.76 5.04 6.85
8.65
49.212 34.925 -6.6 198.323 7.937 3.5 123.0 129.0 181.0 269 45.7 0.1156 5.52
1.9375 1.3750 -0.26 7.8080 0.3125 0.14 4.84 5.08 7.13
12.17
41.275 30.162 1.3 184.841 7.145 3.5 125.0 131.0 174.0 219 45.3 0.1153 3.68
1.6250 1.1875 0.05 7.2772 0.2813 0.14 4.92 5.16 6.85
8.11
49.212 34.925 -6.6 198.323 7.937 3.5 125.0 132.0 181.0 269 45.7 0.1156 5.31
1.9375 1.3750 -0.26 7.8080 0.3125 0.14 4.92 5.20 7.13
11.70
66.675 53.975 -19.8 223.736 11.112 7.0 128.0 141.0 199.0 339 39.7 0.1153 10.18
2.6250 2.1250 -0.78 8.8085 0.4375 0.28 5.04 5.55 7.83
22.44
27.000 21.000 5.6 172.000 5.500 3.3 121.0 127.0 160.0 161 57.2 0.1449 1.83
1.0630 0.8268 0.22 6.7717 0.2165 0.13 4.76 5.00 6.30
4.05
31.750 25.400 5.3 188.016 7.145 3.5 125.0 132.0 172.0 163 51.7 0.1026 2.86
1.2500 1.0000 0.21 7.4022 0.2813 0.14 4.92 5.20 6.77
6.31
36.000 26.000 0.0 188.000 6.580 3.5 128.0 135.0 175.0 227 61.6 0.1084 3.04
1.4173 1.0236 0.00 7.4016 0.2590 0.14 5.04 5.31 6.89
6.70
21.433 16.670 8.4 164.203 3.970 1.5 127.0 129.0 157.0 195 139 0.1509 1.19
0.8438 0.6563 0.33 6.4647 0.1563 0.06 5.00 5.08 6.18
2.63
63.500 49.212 -14.0 245.958 11.112 6.4 137.0 149.0 217.0 454 59.3 0.1323 12.90
2.5000 1.9375 -0.55 9.6834 0.4375 0.25 5.39 5.87 8.54
28.43
38.100 33.338 -5.6 188.811 6.350 3.5 133.0 139.0 177.0 353 91.3 0.1138 3.63
1.5000 1.3125 -0.22 7.4335 0.2500 0.14 5.24 5.47 6.97
8.00
38.100 33.338 -5.6 188.811 6.350 3.5 135.0 141.0 177.0 353 91.3 0.1138 3.44
1.5000 1.3125 -0.22 7.4335 0.2500 0.14 5.31 5.55 6.97
7.59
47.625 34.925 2.3 223.733 7.938 3.5 141.0 148.0 209.0 363 68.5 0.1338 7.19
1.8750 1.3750 0.09 8.8084 0.3125 0.14 5.55 5.83 8.23
15.84
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B229
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF
SINGLE-ROW
T 1
a
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
127.000 234.950 25.400 582000 0.37 1.62 151000 95500 1.58 931000 95500 95925-B
5.0000 9.2500 1.0000 131000 33900 21500 209000
130.000 185.000 13.000 181000 0.47 1.27 47000 38100 1.24 283000 JP13049 JP13010-B
5.1181 7.2835 0.5118 40800 10600 8560 63600
130.175 196.850 15.083 340000 0.34 1.74 88200 52000 1.70 625000 67389 67322-B
5.1250 7.7500 0.5938 76500 19800 11700 141000
133.350 190.500 11.908 262000 0.32 1.87 67900 37300 1.82 542000 48385 48320-B
5.2500 7.5000 0.4688 58900 15300 8390 122000
133.350 215.900 20.638 354000 0.49 1.23 91700 76500 1.20 614000 74525 74850-B
5.2500 8.5000 0.8125 79500 20600 17200 138000
133.350 234.950 25.400 582000 0.37 1.62 151000 95500 1.58 931000 95525 95925-B
5.2500 9.2500 1.0000 131000 33900 21500 209000
136.525 215.900 20.638 354000 0.49 1.23 91700 76500 1.20 614000 74537 74850-B
5.3750 8.5000 0.8125 79500 20600 17200 138000
136.525 254.000 30.162 611000 0.41 1.47 158000 110000 1.43 1030000 99537 99100-B
5.3750 10.0000 1.1875 137000 35600 24800 231000
139.700 215.900 20.638 354000 0.49 1.23 91700 76500 1.20 614000 74550 74850-B
5.5000 8.5000 0.8125 79500 20600 17200 138000
139.700 241.300 22.225 553000 0.32 1.88 143000 78200 1.83 932000 HM231132 HM231115-B
5.5000 9.5000 0.8750 124000 32200 17600 210000
139.700 254.000 30.162 611000 0.41 1.47 158000 110000 1.43 1030000 99550 99100-B
5.5000 10.0000 1.1875 137000 35600 24800 231000
140.000 195.000 13.000 188000 0.50 1.19 48800 42000 1.16 304000 JP14049 JP14010-B
5.5118 7.6772 0.5118 42300 11000 9440 68400
142.875 193.675 9.525 182000 0.37 1.63 47100 29700 1.59 394000 36686 36620-B
5.6250 7.6250 0.3750 40900 10600 6690 88600
142.875 200.025 12.700 265000 0.34 1.78 68800 39600 1.74 560000 48685 48620-B
5.6250 7.8750 0.5000 59600 15500 8900 126000
142.875 241.300 22.225 553000 0.32 1.88 143000 78200 1.83 932000 HM231136 HM231115-B
5.6250 9.5000 0.8750 124000 32200 17600 210000
146.050 193.675 9.525 182000 0.37 1.63 47100 29700 1.59 394000 36690 36620-B
5.7500 7.6250 0.3750 40900 10600 6690 88600
146.050 241.300 22.225 477000 0.44 1.36 124000 93600 1.32 810000 82576 82950-B
5.7500 9.5000 0.8750 107000 27800 21000 182000
146.050 241.300 22.225 553000 0.32 1.88 143000 78200 1.83 932000 HM231140 HM231115-B
5.7500 9.5000 0.8750 124000 32200 17600 210000
146.050 254.000 30.162 611000 0.41 1.47 158000 110000 1.43 1030000 99575 99100-B
5.7500 10.0000 1.1875 137000 35600 24800 231000
149.225 241.300 22.225 553000 0.32 1.88 143000 78200 1.83 932000 HM231149 HM231115-B
5.8750 9.5000 0.8750 124000 32200 17600 210000
149.225 254.000 30.162 611000 0.41 1.47 158000 110000 1.43 1030000 99587 99100-B
5.8750 10.0000 1.1875 137000 35600 24800 231000
150.000 205.000 12.000 179000 0.46 1.31 46500 36500 1.27 339000 JL730646 JL730612-B
5.9055 8.0709 0.4724 40300 10500 8210 76100
152.400 192.088 9.970 132000 0.42 1.44 34200 24400 1.40 277000 L630349 L630310-B
6.0000 7.5625 0.3925 29700 7690 5480 62200
152.400 254.000 30.162 611000 0.41 1.47 158000 110000 1.43 1030000 99600 99100-B
6.0000 10.0000 1.1875 137000 35600 24800 231000
158.750 225.425 13.495 281000 0.38 1.57 72800 47800 1.52 635000 46780 46720-B
6.2500 8.8750 0.5313 63100 16400 10700 143000
160.325 288.925 26.988 763000 0.32 1.88 198000 108000 1.83 1240000 HM237532 HM237510-B
6.3120 11.3750 1.0625 171000 44500 24300 278000
165.100 225.425 13.495 281000 0.38 1.57 72800 47800 1.52 635000 46790 46720-B
6.5000 8.8750 0.5313 63100 16400 10700 143000
165.100 247.650 16.670 375000 0.44 1.36 97200 73200 1.33 779000 67780 67720-B
6.5000 9.7500 0.6563 84300 21900 16500 175000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
B
Caption:
Caption:
C 2
C
d B
D 1
D
R
d b D a
d a
•
B230 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
63.500 49.212 -14.0 245.958 11.112 6.4 142.0 154.0 217.0 454 53.8 0.1323 12.28
2.5000 1.9375 -0.55 9.6834 0.4375 0.25 5.59 6.06 8.54
27.07
27.000 21.000 8.9 192.000 5.000 3.0 137.0 143.0 188.0 192 60.3 0.1064 2.24
1.0630 0.8268 0.35 7.5591 0.1969 0.12 5.39 5.63 7.40
4.95
46.038 38.100 -6.4 203.891 7.145 3.5 141.0 146.0 191.0 384 70.1 0.1220 5.04
1.8125 1.5000 -0.25 8.0272 0.2813 0.14 5.55 5.75 7.52
11.11
39.688 33.338 -4.1 195.956 5.558 3.5 142.0 148.0 186.0 404 95.6 0.1209 3.60
1.5625 1.3125 -0.16 7.7148 0.2188 0.14 5.59 5.83 7.32
7.94
47.625 34.925 2.3 223.733 7.938 3.5 146.0 152.0 209.0 363 63.3 0.1338 6.70
1.8750 1.3750 0.09 8.8084 0.3125 0.14 5.75 5.98 8.23
14.77
63.500 49.212 -14.0 245.958 11.112 9.7 148.0 166.0 217.0 454 53.8 0.1323 11.54
2.5000 1.9375 -0.55 9.6834 0.4375 0.38 5.83 6.54 8.54
25.44
47.625 34.925 2.3 223.733 7.938 3.5 148.0 155.0 209.0 363 68.5 0.1338 6.45
1.8750 1.3750 0.09 8.8084 0.3125 0.14 5.83 6.10 8.23
14.22
66.675 47.625 -12.2 264.973 11.112 7.0 156.0 167.0 238.0 556 73.5 0.1459 14.75
2.6250 1.8750 -0.48 10.4320 0.4375 0.28 6.14 6.57 9.37
32.53
47.625 34.925 2.3 223.733 7.938 3.5 151.0 158.0 209.0 363 63.3 0.1338 6.19
1.8750 1.3750 0.09 8.8084 0.3125 0.14 5.94 6.22 8.23
13.65
56.642 44.450 -11.4 250.723 9.525 3.5 156.0 160.0 224.0 533 85.9 0.1327 10.73
2.2300 1.7500 -0.45 9.8710 0.3750 0.14 6.14 6.30 8.82
23.65
66.675 47.625 -12.2 264.973 11.112 7.0 156.0 170.0 238.0 556 73.5 0.1459 14.37
2.6250 1.8750 -0.48 10.4320 0.4375 0.28 6.14 6.69 9.37
31.68
27.000 21.000 11.9 202.000 5.000 3.0 148.0 153.0 198.0 220 68.1 0.1133 2.40
1.0630 0.8268 0.47 7.9528 0.1969 0.12 5.83 6.02 7.80
5.30
28.575 23.020 4.8 197.541 3.970 1.5 151.0 153.0 190.0 366 152 0.1768 2.48
1.1250 0.9063 0.19 7.7772 0.1563 0.06 5.94 6.02 7.48
5.46
39.688 34.130 -3.0 205.481 5.555 3.5 151.0 158.0 194.0 440 115 0.1261 3.85
1.5625 1.3437 -0.12 8.0898 0.2187 0.14 5.94 6.22 7.64
8.50
56.642 44.450 -11.4 250.723 9.525 3.5 158.0 162.0 224.0 533 85.9 0.1327 10.42
2.2300 1.7500 -0.45 9.8710 0.3750 0.14 6.22 6.38 8.82
22.96
28.575 23.020 4.8 197.541 3.970 1.5 153.0 155.0 190.0 366 121 0.1768 2.31
1.1250 0.9063 0.19 7.7772 0.1563 0.06 6.02 6.10 7.48
5.10
56.642 44.450 -3.6 250.723 9.525 3.5 160.0 166.0 226.0 460 81.1 0.1405 10.34
2.2300 1.7500 -0.14 9.8710 0.3750 0.14 6.30 6.54 8.90
22.79
56.642 44.450 -11.4 250.723 9.525 3.5 160.0 164.0 224.0 533 85.9 0.1327 10.10
2.2300 1.7500 -0.45 9.8710 0.3750 0.14 6.30 6.46 8.82
22.26
66.675 47.625 -12.2 264.973 11.112 7.0 162.0 175.0 238.0 556 73.5 0.1459 13.62
2.6250 1.8750 -0.48 10.4320 0.4375 0.28 6.38 6.89 9.37
30.03
56.642 44.450 -11.4 250.723 9.525 3.5 163.0 167.0 224.0 533 85.9 0.1327 9.77
2.2300 1.7500 -0.45 9.8710 0.3750 0.14 6.42 6.57 8.82
21.54
66.675 47.625 -12.2 264.973 11.112 7.0 165.0 178.0 238.0 556 73.5 0.1459 13.24
2.6250 1.8750 -0.48 10.4320 0.4375 0.28 6.50 7.01 9.37
29.18
28.575 21.438 11.4 210.000 4.862 3.3 158.0 164.0 200.0 295 103 0.1763 2.68
1.1250 0.8440 0.45 8.2677 0.1914 0.13 6.22 6.46 7.87
5.90
24.000 19.000 10.2 197.371 3.967 2.0 158.0 162.0 190.0 293 164 0.1698 1.63
0.9449 0.7480 0.40 7.7705 0.1562 0.08 6.22 6.38 7.48
3.59
66.675 47.625 -12.2 264.973 11.112 7.0 169.5 181.0 238.0 556 66.7 0.1459 12.84
2.6250 1.8750 -0.48 10.4320 0.4375 0.28 6.68 7.13 9.37
28.31
39.688 33.337 2.5 230.881 5.557 3.5 169.0 176.0 219.0 572 133 0.1432 5.18
1.5625 1.3125 0.10 9.0898 0.2188 0.14 6.65 6.93 8.62
11.42
63.500 47.625 -11.7 299.933 11.112 7.0 181.0 192.0 279.0 751 101 0.1168 17.84
2.5000 1.8750 -0.46 11.8084 0.4375 0.28 7.13 7.56 10.98
39.33
39.688 33.337 2.5 230.881 5.557 3.5 174.0 181.0 219.0 572 175 0.1432 4.68
1.5625 1.3125 0.10 9.0898 0.2188 0.14 6.85 7.13 8.62
10.32
47.625 38.100 4.8 254.691 7.145 3.5 179.0 185.0 241.0 622 122 0.1214 8.48
1.8750 1.5000 0.19 10.0272 0.2813 0.14 7.05 7.28 9.49
18.70
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B231
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF
SINGLE-ROW
T 1
a
d D T1 C1 e Y C90 Ca90 K C0 Inner Outer
165.100 254.000 22.225 389000 0.37 1.62 101000 63800 1.58 644000 86650 86100-B
6.5000 10.0000 0.8750 87400 22700 14300 145000
171.450 260.350 25.400 605000 0.40 1.49 157000 108000 1.45 1180000 HM535349 HM535310-B
6.7500 10.2500 1.0000 136000 35300 24300 265000
174.625 288.925 26.988 611000 0.47 1.28 159000 127000 1.25 1070000 94687 94113-B
6.8750 11.3750 1.0625 137000 35600 28600 242000
174.625 288.925 26.988 763000 0.32 1.88 198000 108000 1.83 1240000 HM237542 HM237510-B
6.8750 11.3750 1.0625 171000 44500 24300 278000
177.800 247.650 16.670 375000 0.44 1.36 97200 73200 1.33 779000 67790 67720-B
7.0000 9.7500 0.6563 84300 21900 16500 175000
177.800 288.925 26.988 611000 0.47 1.28 159000 127000 1.25 1070000 94700 94113-B
7.0000 11.3750 1.0625 137000 35600 28600 242000
179.975 317.500 28.575 677000 0.52 1.15 175000 157000 1.12 1290000 93708 93125-B
7.0856 12.5000 1.1250 152000 39500 35300 290000
190.500 266.700 16.670 386000 0.48 1.26 99900 81700 1.22 835000 67885 67820-B
7.5000 10.5000 0.6563 86700 22500 18400 188000
190.500 317.500 28.575 677000 0.52 1.15 175000 157000 1.12 1290000 93750 93125-B
7.5000 12.5000 1.1250 152000 39500 35300 290000
193.675 282.575 23.812 398000 0.42 1.44 103000 73300 1.41 692000 87762 87111-B
7.6250 11.1250 0.9375 89400 23200 16500 156000
200.025 317.500 28.575 677000 0.52 1.15 175000 157000 1.12 1290000 93787 93125-B
7.8750 12.5000 1.1250 152000 39500 35300 290000
203.200 282.575 16.670 393000 0.51 1.18 102000 88700 1.15 876000 67983 67920-B
8.0000 11.1250 0.6563 88300 22900 19900 197000
203.200 317.500 28.575 677000 0.52 1.15 175000 157000 1.12 1290000 93800 93125-B
8.0000 12.5000 1.1250 152000 39500 35300 290000
206.375 282.575 16.670 393000 0.51 1.18 102000 88700 1.15 876000 67985 67920-B
8.1250 11.1250 0.6563 88300 22900 19900 197000
209.550 317.500 28.575 677000 0.52 1.15 175000 157000 1.12 1290000 93825 93125-B
8.2500 12.5000 1.1250 152000 39500 35300 290000
215.900 285.750 19.050 398000 0.48 1.25 103000 85000 1.21 892000 LM742749 LM742710-B
8.5000 11.2500 0.7500 89500 23200 19100 200000
228.600 327.025 25.400 517000 0.41 1.48 134000 93300 1.44 1070000 8573 8520-B
9.0000 12.8750 1.0000 116000 30100 21000 240000
241.300 327.025 25.400 517000 0.41 1.48 134000 93300 1.44 1070000 8578 8520-B
9.5000 12.8750 1.0000 116000 30100 21000 240000
244.475 381.000 34.925 889000 0.52 1.16 231000 204000 1.13 1690000 EE126097 126150-B
9.6250 15.0000 1.3750 200000 51800 45800 381000
254.000 358.775 30.162 896000 0.33 1.80 232000 132000 1.76 1850000 M249749 M249710-B
10.0000 14.1250 1.1875 202000 52200 29700 416000
254.000 403.225 38.100 865000 0.40 1.49 224000 154000 1.45 1600000 EE275100 275158-B
10.0000 15.8750 1.5000 195000 50400 34700 359000
266.700 355.600 22.225 688000 0.36 1.67 178000 110000 1.62 1510000 LM451349 LM451310-B
10.5000 14.0000 0.8750 155000 40100 24700 339000
266.700 403.225 38.100 865000 0.40 1.49 224000 154000 1.45 1600000 EE275105 275158-B
10.5000 15.8750 1.5000 195000 50400 34700 359000
273.050 403.225 38.100 865000 0.40 1.49 224000 154000 1.45 1600000 EE275108 275158-B
10.7500 15.8750 1.5000 195000 50400 34700 359000
276.225 349.948 18.700 326000 0.54 1.11 84600 78000 1.08 750000 L853049 L853011-B
10.8750 13.7775 0.7362 73400 19000 17500 169000
280.192 406.400 28.575 906000 0.39 1.55 235000 155000 1.51 1820000 EE128110 128160-B
11.0312 16.0000 1.1250 204000 52800 34900 409000
280.192 406.400 28.575 851000 0.39 1.55 221000 146000 1.51 1660000 EE128111 128160-B
11.0312 16.0000 1.1250 191000 49600 32800 374000
298.450 444.500 36.512 758000 0.38 1.59 196000 127000 1.55 1390000 EE291175 291750-B
11.7500 17.5000 1.4375 170000 44200 28600 312000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
B
Caption:
Caption:
C 2
C
d B
D 1
D
R
d b D a
d a
•
B232 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
kg (lbs.)
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
46.038 33.338 -1.5 263.525 9.525 4.8 176.0 185.0 239.0 466 112 0.1041 7.96
1.8125 1.3125 -0.06 10.3750 0.3750 0.19 6.93 7.28 9.41
17.55
66.675 52.388 -8.6 271.374 11.112 3.5 188.0 192.0 250.0 750 116 0.1263 12.71
2.6250 2.0625 -0.34 10.6840 0.4375 0.14 7.40 7.56 9.84
28.02
63.500 47.625 -0.8 299.933 11.112 7.0 193.0 204.0 272.0 692 93.8 0.1287 16.36
2.5000 1.8750 -0.03 11.8084 0.4375 0.28 7.60 8.03 10.71
36.07
63.500 47.625 -11.7 299.933 11.112 7.0 191.0 202.0 279.0 751 101 0.1168 15.96
2.5000 1.8750 -0.46 11.8084 0.4375 0.28 7.52 7.95 10.98
35.20
47.625 38.100 4.8 254.691 7.145 3.5 188.0 194.0 241.0 622 122 0.1214 7.21
1.8750 1.5000 0.19 10.0272 0.2813 0.14 7.40 7.64 9.49
15.89
63.500 47.625 -0.8 299.933 11.112 7.0 195.0 207.0 272.0 692 93.8 0.1287 15.92
2.5000 1.8750 -0.03 11.8084 0.4375 0.28 7.68 8.15 10.71
35.10
63.500 46.038 7.9 328.523 11.112 3.5 204.0 209.0 300.0 912 126 0.1460 21.69
2.5000 1.8125 0.31 12.9340 0.4375 0.14 8.03 8.23 11.81
47.82
46.833 38.100 10.2 273.741 7.145 3.5 203.0 209.0 259.0 728 147 0.1310 8.07
1.8438 1.5000 0.40 10.7772 0.2813 0.14 7.99 8.23 10.20
17.78
63.500 46.038 7.9 328.523 11.112 4.3 212.0 218.0 300.0 912 126 0.1460 20.15
2.5000 1.8125 0.31 12.9340 0.4375 0.17 8.35 8.58 11.81
44.43
47.625 36.512 3.8 292.000 9.525 3.5 206.0 211.0 272.0 575 131 0.1155 9.47
1.8750 1.4375 0.15 11.4960 0.3750 0.14 8.11 8.31 10.71
20.88
63.500 46.038 7.9 328.523 11.112 4.3 219.0 225.0 300.0 912 126 0.1460 18.70
2.5000 1.8125 0.31 12.9340 0.4375 0.17 8.62 8.86 11.81
41.22
46.038 36.512 16.0 289.616 7.145 3.5 216.0 222.0 275.0 820 172 0.1388 8.80
1.8125 1.4375 0.63 11.4022 0.2813 0.14 8.50 8.74 10.83
19.40
63.500 46.038 7.9 328.523 11.112 4.3 222.0 227.0 300.0 912 126 0.1460 18.20
2.5000 1.8125 0.31 12.9340 0.4375 0.17 8.74 8.94 11.81
40.12
46.038 36.512 16.0 289.616 7.145 3.5 219.0 224.0 275.0 820 172 0.1388 8.43
1.8125 1.4375 0.63 11.4022 0.2813 0.14 8.62 8.82 10.83
18.59
63.500 46.038 7.9 328.523 11.112 4.3 227.0 233.0 300.0 912 126 0.1460 17.18
2.5000 1.8125 0.31 12.9340 0.4375 0.17 8.93 9.17 11.81
37.87
46.038 34.925 14.2 293.685 7.938 3.5 227.0 233.0 280.0 867 225 0.1388 7.81
1.8125 1.3750 0.56 11.5624 0.3125 0.14 8.94 9.17 11.02
17.21
52.388 36.512 7.6 336.448 9.525 6.4 244.0 255.0 313.0 1050 172 0.1401 13.66
2.0625 1.4375 0.30 13.2460 0.3750 0.25 9.61 10.04 12.32
30.11
52.388 36.512 7.6 336.448 9.525 6.4 253.0 264.0 313.0 1050 172 0.1401 11.73
2.0625 1.4375 0.30 13.2460 0.3750 0.25 9.96 10.39 12.32
25.86
76.200 57.150 9.7 393.598 12.700 6.4 266.0 275.0 358.0 1320 169 0.1640 31.86
3.0000 2.2500 0.38 15.4960 0.5000 0.25 10.47 10.83 14.09
70.24
71.438 53.975 -6.9 371.475 12.700 3.5 270.0 274.0 343.0 1630 168 0.1526 22.21
2.8125 2.1250 -0.27 14.6250 0.5000 0.14 10.63 10.79 13.50
48.96
69.850 46.038 2.5 417.408 14.288 6.4 277.0 287.0 389.0 1450 201 0.1555 31.80
2.7500 1.8125 0.10 16.4334 0.5625 0.25 10.91 11.30 15.31
70.11
57.150 44.450 5.1 365.125 9.525 3.5 281.0 285.0 344.0 1550 212 0.1536 15.65
2.2500 1.7500 0.20 14.3750 0.3750 0.14 11.06 11.22 13.54
34.51
69.850 46.038 2.5 417.408 14.288 6.4 287.0 296.0 389.0 1450 201 0.1555 28.96
2.7500 1.8125 0.10 16.4334 0.5625 0.25 11.30 11.65 15.31
63.84
69.850 46.038 2.5 417.408 14.288 6.4 291.0 301.0 389.0 1450 201 0.1555 27.48
2.7500 1.8125 0.10 16.4334 0.5625 0.25 11.46 11.85 15.31
60.59
34.925 23.812 35.1 357.950 6.000 3.5 288.0 293.0 342.0 1060 350 0.1517 7.58
1.3750 0.9375 1.38 14.0925 0.2362 0.14 11.34 11.54 13.46
16.72
67.673 53.975 6.6 418.998 12.700 6.8 307.0 309.0 384.0 1730 255 0.1628 27.79
2.6643 2.1250 0.26 16.4960 0.5000 0.27 12.09 12.17 15.12
61.27
67.673 53.975 6.6 418.998 12.700 6.8 307.0 309.0 384.0 1620 240 0.1592 27.94
2.6643 2.1250 0.26 16.4960 0.5000 0.27 12.09 12.17 15.12
61.60
61.912 39.688 7.6 457.098 12.700 8.0 320.0 332.0 428.0 1580 245 0.1557 30.43
2.4375 1.5625 0.30 17.9960 0.5000 0.31 12.60 13.07 16.85
67.09
Continued on next page.
•
B
Caption:
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
TIMKEN PRODUCTS CATALOG B233
ROLLER BEARINGS
Caption:
Caption:
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
TSF SINGLE-ROW
d D T1 C(1) e Y C90 Ca90 K C0 Inner Outer
304.800 404.950 22.225 575000 0.36 1.67 149000 91600 1.63 1310000 L357049 L357019-B
12.0000 15.9429 0.8750 129000 33500 20600 295000
304.800 406.400 25.400 754000 0.44 1.36 196000 148000 1.32 1740000 LM757049 LM757010-B
12.0000 16.0000 1.0000 170000 44000 33200 392000
304.800 444.500 36.512 758000 0.38 1.59 196000 127000 1.55 1390000 EE291201 291750-B
12.0000 17.5000 1.4375 170000 44200 28600 312000
317.500 444.500 36.512 758000 0.38 1.59 196000 127000 1.55 1390000 EE291250 291750-B
12.5000 17.5000 1.4375 170000 44200 28600 312000
330.200 482.600 41.275 1230000 0.39 1.54 318000 213000 1.49 2320000 EE526130 526190-B
13.0000 19.0000 1.6250 276000 71400 47800 523000
349.250 501.650 34.925 1320000 0.37 1.63 343000 216000 1.59 2780000 EE333137 333197-B
13.7500 19.7500 1.3750 298000 77200 48500 626000
371.475 508.000 38.100 899000 0.44 1.36 233000 176000 1.33 1870000 EE231462 232000-B
14.6250 20.0000 1.5000 202000 52400 39500 420000
381.000 479.425 23.812 582000 0.50 1.21 151000 128000 1.18 1380000 L865547 L865512-B
15.0000 18.8750 0.9375 131000 33900 28800 311000
381.000 522.288 38.100 1360000 0.39 1.56 353000 233000 1.51 2950000 LM565949 LM565910-B
15.0000 20.5625 1.5000 306000 79400 52400 663000
396.875 549.275 38.100 1400000 0.41 1.47 364000 254000 1.43 3130000 LM567943 LM567910-B
15.6250 21.6250 1.5000 316000 81800 57100 704000
406.400 508.000 25.400 842000 0.37 1.64 218000 137000 1.60 2230000 L467549 L467510-B
16.0000 20.0000 1.0000 189000 49100 30700 502000
406.400 549.275 38.100 1400000 0.41 1.47 364000 254000 1.43 3130000 LM567949 LM567910-B
16.0000 21.6250 1.5000 316000 81800 57100 704000
488.950 660.400 38.100 2030000 0.31 1.95 525000 276000 1.90 4590000 EE640192 640260-B
19.2500 26.0000 1.5000 455000 118000 62000 1030000
Caption:
B
Caption:
T 1
C 2
C
D 1
D
d B
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
a
R
d b D a
d a
•
B234 TIMKEN PRODUCTS CATALOG
Tapered - Type TSF
50.800 38.100 12.7 419.923 9.525 6.4 319.0 329.0 380.0 1750 301 0.1585 17.28
2.0000 1.5000 0.50 16.5324 0.3750 0.25 12.56 12.95 14.96
38.10
63.500 47.625 16.3 419.100 9.525 6.4 322.0 331.0 393.0 1990 260 0.1775 21.93
2.5000 1.8750 0.64 16.5000 0.3750 0.25 12.68 13.03 15.47
48.35
61.912 39.688 7.6 457.098 12.700 8.0 324.0 337.0 428.0 1580 245 0.1557 28.97
2.4375 1.5625 0.30 17.9960 0.5000 0.31 12.76 13.27 16.85
63.87
61.912 39.688 7.6 457.098 12.700 8.0 334.0 346.0 428.0 1580 245 0.1557 25.95
2.4375 1.5625 0.30 17.9960 0.5000 0.31 13.15 13.62 16.85
57.22
80.167 60.325 4.8 498.373 15.875 6.4 351.0 360.0 464.0 2280 287 0.1790 46.44
3.1562 2.3750 0.19 19.6210 0.6250 0.25 13.82 14.17 18.27
102.38
84.138 69.850 3.6 515.838 14.288 6.4 372.0 382.0 486.0 3040 337 0.1928 54.31
3.3125 2.7500 0.14 20.3086 0.5625 0.25 14.65 15.04 19.13
119.74
66.675 50.800 19.6 522.188 14.288 6.4 390.0 400.0 489.0 2390 366 0.1874 37.31
2.6250 2.0000 0.77 20.5586 0.5625 0.25 15.35 15.75 19.25
82.25
47.625 34.925 42.9 489.737 9.525 6.4 395.0 407.0 465.0 2260 529 0.1897 18.86
1.8750 1.3750 1.69 19.2810 0.3750 0.25 15.55 16.02 18.31
41.58
84.138 61.912 8.9 536.476 14.288 6.4 402.0 411.0 507.0 3380 378 0.2028 50.16
3.3125 2.4375 0.35 21.1211 0.5625 0.25 15.83 16.18 19.96
110.59
84.138 61.912 15.5 563.463 14.288 6.4 420.0 430.0 531.0 3800 427 0.2143 58.76
3.3125 2.4375 0.61 22.1836 0.5625 0.25 16.54 16.93 20.91
129.54
61.912 47.625 20.3 519.013 11.112 3.3 423.0 426.0 492.0 3720 673 0.2038 27.21
2.4375 1.8750 0.80 20.4336 0.4375 0.13 16.65 16.77 19.37
59.98
84.138 61.912 15.5 563.463 14.288 6.4 427.0 437.0 531.0 3800 427 0.2143 55.12
3.3125 2.4375 0.61 22.1836 0.5625 0.25 16.81 17.20 20.91
121.52
94.458 69.850 4.8 676.275 14.288 6.4 513.0 522.0 642.0 6320 601 0.2310 86.40
3.7188 2.7500 0.19 26.6250 0.5625 0.25 20.20 20.55 25.28
190.48
((4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
Dimensions, mm (inches)
Bearing Shaft
Factors
Weight
Housing
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
kg (lbs.)
B C a (3) D1 C2 R(4) da db Da G1 G2 Cg
B
Caption:
TIMKEN PRODUCTS CATALOG B235
•
ROLLER BEARINGS
Caption:
Caption:
NOTES
B
Caption:
•
B236 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Caption:
TAPERED ROLLER BEARINGS
• TDO consists of a single piece (double) outer race and two single inner races.
• Con?guration offers a wide effective bearing spread to support loads created by overturning moments.
• Bearings can be used at ?xed positions or allowed to ?oat in the housing bore to compensate for shaft expansion.
• TDO bearings are usually supplied complete with an inner race spacer as a pre-set assembly.
• To suit the application duty, the built-in setting value needs to be established by your Timken representative before an order is placed.
• The tables list part numbers of plain-ring spacers.
• If a spacer with provision for lubricant passage is required, consult your Timken representative.
• To place an order or obtain a price quotation, specify the bearing and spacer part number.
Example: inner race outer race
A2047 - A2120D
R800003 spacer
• Double outer race can be used with any single race from the same ‘series.’
• The tables list regularly speci?ed inner race part numbers.
• Please consult a Timken representative for more information.
B
TDO
DOUBLE OUTER RACE
CD suf?x now replaces the D suf?x listed for part numbers in previous publications. A groove with oil holes is provided for lubrication in suf?x outer race.
D
CD
DC
Caption:
Outer races can be pinned to prevent circumferential precession in the housing at ?oating positions (see the following tables for details).
This suf?x in current part numbers now replaces the D and DC suf?xes listed for part numbers in previous publications.
A groove with oil holes is provided for lubrication in suf?x outer races.
Can be pinned to prevent circumferential precession in the housing at ?oating positions (see the following tables for details).
Outer races have one lubricant hole. Normally, these are used at ?oating positions with a ?xing pin.
BEARING DATA TABLES
In the following bearing data tables, part numbers are listed in ascending order of bore, outside diameter and width.
Bearing ratings shown in tables are based on environmental reference conditions. Effects of known operating conditions on bearing performance in an application should be investigated before final bearing selection is made.
Approximate mass is listed for every part number. For weight-critical applications or exact freight cost evaluation purposes, a more accurate value should be obtained from your Timken representative.
TIMKEN PRODUCTS CATALOG B237
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
11.987 30.480 25.400 21.260 18500 0.41 1.67 2.48 2750 1910 4780 1.44
0.4719 1.2000 1.0000 0.8370 4150 618 429 1080
14.987 34.987 25.174 20.638 21200 0.45 1.49 2.22 3160 2450 5500 1.29
0.5901 1.3775 0.9911 0.8125 4770 710 550 1240
16.993 47.000 31.750 25.212 43100 0.36 1.89 2.82 6420 3920 11200 1.64
0.6690 1.8504 1.2500 0.9926 9690 1440 881 2510
19.050 47.000 31.750 25.212 43100 0.36 1.89 2.82 6420 3920 11200 1.64
0.7500 1.8504 1.2500 0.9926 9690 1440 881 2510
19.050 57.150 49.212 36.512 74900 0.59 1.14 1.70 11200 11300 19400 0.99
0.7500 2.2500 1.9375 1.4375 16800 2510 2540 4370
19.987 45.984 31.750 25.212 43100 0.36 1.89 2.82 6420 3920 11200 1.64
0.7869 1.8104 1.2500 0.9926 9690 1440 881 2510
19.987 47.000 31.750 25.212 43100 0.36 1.89 2.82 6420 3920 11200 1.64
0.7869 1.8504 1.2500 0.9926 9690 1440 881 2510
20.000 50.005 33.340 25.400 46900 0.40 1.68 2.50 6990 4810 12200 1.45
0.7874 1.9687 1.3126 1.0000 10500 1570 1080 2730
23.812 71.438 42.862 36.512 94700 0.36 1.87 2.79 14100 8700 24600 1.62
0.9375 2.8125 1.6875 1.4375 21300 3170 1960 5520
23.812 71.975 42.761 36.512 94700 0.36 1.87 2.79 14100 8700 24600 1.62
0.9375 2.8336 1.6835 1.4375 21300 3170 1960 5520
24.384 80.962 55.562 39.688 125000 0.67 1.01 1.50 18600 21300 32400 0.87
0.9600 3.1875 2.1875 1.5625 28100 4190 4790 7290
24.981 50.005 33.340 25.400 46900 0.40 1.68 2.50 6990 4810 12200 1.45
0.9835 1.9687 1.3126 1.0000 10500 1570 1080 2730
24.981 62.000 39.688 36.258 69700 0.38 1.77 2.63 10400 6800 18100 1.53
0.9835 2.4409 1.5625 1.4275 15700 2330 1530 4060
25.000 50.005 33.340 25.400 46900 0.40 1.68 2.50 6990 4810 12200 1.45
0.9843 1.9687 1.3126 1.0000 10500 1570 1080 2730
25.000 62.000 39.688 36.258 69700 0.38 1.77 2.63 10400 6800 18100 1.53
0.9843 2.4409 1.5625 1.4275 15700 2330 1530 4060
25.400 50.005 33.340 25.400 46900 0.40 1.68 2.50 6990 4810 12200 1.45
1.0000 1.9687 1.3126 1.0000 10500 1570 1080 2730
25.400 50.005 33.340 25.400 46900 0.40 1.68 2.50 6990 4810 12200 1.45
1.0000 1.9687 1.3126 1.0000 10500 1570 1080 2730
25.400 63.500 46.038 36.512 81400 0.35 1.93 2.87 12100 7280 21100 1.67
1.0000 2.5000 1.8125 1.4375 18300 2730 1640 4750
25.400 63.500 46.038 36.512 81400 0.35 1.93 2.87 12100 7280 21100 1.67
1.0000 2.5000 1.8125 1.4375 18300 2730 1640 4750
25.400 63.500 46.038 36.512 81400 0.35 1.93 2.87 12100 7280 21100 1.67
1.0000 2.5000 1.8125 1.4375 18300 2730 1640 4750
25.400 71.438 42.862 36.512 94700 0.36 1.87 2.79 14100 8700 24600 1.62
1.0000 2.8125 1.6875 1.4375 21300 3170 1960 5520
25.400 71.975 42.761 36.512 94700 0.36 1.87 2.79 14100 8700 24600 1.62
1.0000 2.8336 1.6835 1.4375 21300 3170 1960 5520
28.575 63.500 46.038 36.512 81400 0.35 1.93 2.87 12100 7280 21100 1.67
1.1250 2.5000 1.8125 1.4375 18300 2730 1640 4750
28.575 66.421 44.453 38.100 90100 0.34 1.99 2.96 13400 7790 23300 1.72
1.1250 2.6150 1.7501 1.5000 20200 3010 1750 5250
28.575 69.850 66.675 57.150 135000 0.27 2.47 3.67 20100 9410 35000 2.14
1.1250 2.7500 2.6250 2.2500 30300 4520 2120 7870
28.575 71.438 42.862 36.512 94700 0.36 1.87 2.79 14100 8700 24600 1.62
1.1250 2.8125 1.6875 1.4375 21300 3170 1960 5520
28.575 71.975 42.761 36.512 94700 0.36 1.87 2.79 14100 8700 24600 1.62
1.1250 2.8336 1.6835 1.4375 21300 3170 1960 5520
28.575 76.200 47.625 38.100 106000 0.45 1.49 2.21 15800 12300 27500 1.29
1.1250 3.0000 1.8750 1.5000 23800 3550 2750 6170
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B238 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
A2047 A2120D R800003
A4059 A4138D X6SA4059
05066 05185D X1S-05066
05075 05185D X3S-05075
21075 21226D X1S-21075
05079 05180D
05079 05185D X1S-05079
07079 07196D X1S-07079
26093 26282D
26093 26284D
43096 43319D X1S-43096
07098 07196D X1S-07097
17098 17245D X1S-17098
07097 07196D X1S-07097
17098X 17245D X1S-17098
07100-S 07196D X1S-07100
07100-SA 07196D X1S-07100
15100 15251D
15100-S 15251D X1S-15101
15101 15251D X1S-15101
26100 26282D X1S-26100
26100 26284D
15112 15251D X1S-15112
24112 24262D
2578 2524YD
26112 26282D
26112 26284D
02872 02823D X1S-02872
0.8 16.5 0.0 28.0 1.7 3.17 0.0308 0.08
0.03 0.65 0.00 1.10
0.19
B
0.8 19.5 0.6 31.5 2.3 4.12 0.0355 0.12
0.03 0.77 0.02 1.24
0.26
1.5 24.5 0.8 42.5 5.8 5.55 0.0448 0.28
0.06 0.96 0.03 1.67
0.62
1.3 25.0 0.8 42.5 5.8 5.55 0.0448 0.26
0.05 0.98 0.03 1.67
0.58
1.5 31.5 0.8 51.0 7 3.55 0.0558 0.65
0.06 1.24 0.03 2.01
1.44
1.5 26.5 0.8 42.0 5.8 5.55 0.0448 0.26
0.06 1.04 0.03 1.65
0.56
Caption:
1.5 26.5 0.8 42.5 5.8 5.55 0.0448 0.26
0.06 1.04 0.03 1.67
0.57
1.5 27.5 0.6 46.5 7.6 7.07 0.0509 0.32
0.06 1.08 0.02 1.83
0.70
2.3 35.0 0.4 65.0 16.1 10.1 0.0630 0.88
0.09 1.38 0.02 2.56
1.94
2.3 35.0 0.8 65.0 16.1 10.1 0.0630 0.90
0.09 1.38 0.03 2.56
1.98
0.8 40.5 1.5 74.0 16.8 7.57 0.0774 1.43
0.03 1.59 0.06 2.91
3.14
1.5 31.0 0.6 46.5 7.6 7.07 0.0509 0.28
0.06 1.22 0.02 1.83
0.61
1.5 33.0 0.8 57.0 11.8 7.49 0.0579 0.60
0.06 1.30 0.03 2.24
1.33
1.5 31.0 0.6 46.5 7.6 7.07 0.0509 0.28
0.06 1.22 0.02 1.83
0.61
1.5 33.0 0.8 57.0 11.8 7.49 0.0579 0.60
0.06 1.30 0.03 2.24
1.33
1.5 31.5 0.6 46.5 7.6 7.07 0.0509 0.27
0.06 1.24 0.02 1.83
0.60
3.3 35.0 0.6 46.5 7.6 7.07 0.0509 0.27
0.13 1.38 0.02 1.83
0.59
3.5 38.0 0.8 59.0 14.6 7.58 0.0606 0.69
0.14 1.50 0.03 2.32
1.53
1.3 33.5 0.8 59.0 14.6 7.58 0.0606 0.72
0.05 1.32 0.03 2.32
1.59
0.8 32.5 0.8 59.0 14.6 7.58 0.0606 0.72
0.03 1.28 0.03 2.32
1.59
1.5 34.5 0.4 65.0 16.1 10.1 0.0630 0.87
0.06 1.36 0.02 2.56
1.91
1.5 34.5 0.8 65.0 16.1 10.1 0.0630 0.88
0.06 1.36 0.03 2.56
1.95
3.5 40.0 0.8 59.0 14.6 7.58 0.0606 0.66
0.14 1.57 0.03 2.32
1.45
1.5 36.0 0.8 61.0 14 8.28 0.0589 0.70
0.06 1.42 0.03 2.40
1.54
2.3 39.0 0.8 64.0 23.6 9.63 0.0656 1.19
0.09 1.54 0.03 2.52
2.63
1.5 37.0 0.4 65.0 16.1 10.1 0.0630 0.83
0.06 1.46 0.02 2.56
1.82
1.5 37.0 0.8 65.0 16.1 10.1 0.0630 0.84
0.06 1.46 0.03 2.56
1.86
0.8 37.5 0.8 70.0 20.6 10.1 0.0740 1.13
0.03 1.48 0.03 2.76
2.49
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B239
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
28.575 80.962 55.562 39.688 125000 0.67 1.01 1.50 18600 21300 32400 0.87
1.1250 3.1875 2.1875 1.5625 28100 4190 4790 7290
29.987 62.000 39.688 36.258 69700 0.38 1.77 2.63 10400 6800 18100 1.53
1.1806 2.4409 1.5625 1.4275 15700 2330 1530 4060
29.987 63.500 46.038 36.512 81400 0.35 1.93 2.87 12100 7280 21100 1.67
1.1806 2.5000 1.8125 1.4375 18300 2730 1640 4750
29.987 71.438 42.862 36.512 94700 0.36 1.87 2.79 14100 8700 24600 1.62
1.1806 2.8125 1.6875 1.4375 21300 3170 1960 5520
29.987 71.975 42.761 36.512 94700 0.36 1.87 2.79 14100 8700 24600 1.62
1.1806 2.8336 1.6835 1.4375 21300 3170 1960 5520
29.987 80.962 55.562 39.688 125000 0.67 1.01 1.50 18600 21300 32400 0.87
1.1806 3.1875 2.1875 1.5625 28100 4190 4790 7290
30.000 69.012 46.040 38.100 88000 0.38 1.77 2.63 13100 8570 22800 1.53
1.1811 2.7170 1.8126 1.5000 19800 2950 1930 5130
30.000 69.012 46.040 38.100 88000 0.38 1.77 2.63 13100 8570 22800 1.53
1.1811 2.7170 1.8126 1.5000 19800 2950 1930 5130
30.162 58.738 32.542 24.608 51100 0.47 1.42 2.12 7610 6170 13200 1.23
1.1875 2.3125 1.2812 0.9688 11500 1710 1390 2980
30.162 62.000 39.688 36.258 69700 0.38 1.77 2.63 10400 6800 18100 1.53
1.1875 2.4409 1.5625 1.4275 15700 2330 1530 4060
30.162 66.421 44.453 38.100 90100 0.34 1.99 2.96 13400 7790 23300 1.72
1.1875 2.6150 1.7501 1.5000 20200 3010 1750 5250
30.162 69.850 66.675 57.150 135000 0.27 2.47 3.67 20100 9410 35000 2.14
1.1875 2.7500 2.6250 2.2500 30300 4520 2120 7870
30.162 80.035 46.040 34.925 102000 0.40 1.68 2.50 15200 10500 26500 1.45
1.1875 3.1510 1.8126 1.3750 23000 3430 2360 5970
30.162 80.962 55.562 39.688 125000 0.67 1.01 1.50 18600 21300 32400 0.87
1.1875 3.1875 2.1875 1.5625 28100 4190 4790 7290
30.213 63.500 46.038 36.512 81400 0.35 1.93 2.87 12100 7280 21100 1.67
1.1895 2.5000 1.8125 1.4375 18300 2730 1640 4750
30.213 63.500 46.038 36.512 81400 0.35 1.93 2.87 12100 7280 21100 1.67
1.1895 2.5000 1.8125 1.4375 18300 2730 1640 4750
31.750 58.738 32.542 24.608 51100 0.47 1.42 2.12 7610 6170 13200 1.23
1.2500 2.3125 1.2812 0.9688 11500 1710 1390 2980
31.750 63.500 44.259 36.512 81400 0.35 1.93 2.87 12100 7280 21100 1.67
1.2500 2.5000 1.7425 1.4375 18300 2730 1640 4750
31.750 63.500 46.038 36.512 81400 0.35 1.93 2.87 12100 7280 21100 1.67
1.2500 2.5000 1.8125 1.4375 18300 2730 1640 4750
31.750 63.500 46.038 36.512 81400 0.35 1.93 2.87 12100 7280 21100 1.67
1.2500 2.5000 1.8125 1.4375 18300 2730 1640 4750
31.750 69.012 46.040 38.100 88000 0.38 1.77 2.63 13100 8570 22800 1.53
1.2500 2.7170 1.8126 1.5000 19800 2950 1930 5130
31.750 69.850 66.675 57.150 135000 0.27 2.47 3.67 20100 9410 35000 2.14
1.2500 2.7500 2.6250 2.2500 30300 4520 2120 7870
31.750 69.850 66.675 57.150 135000 0.27 2.47 3.67 20100 9410 35000 2.14
1.2500 2.7500 2.6250 2.2500 30300 4520 2120 7870
31.750 76.200 47.625 38.100 106000 0.45 1.49 2.21 15800 12300 27500 1.29
1.2500 3.0000 1.8750 1.5000 23800 3550 2750 6170
31.750 76.200 47.625 38.100 106000 0.45 1.49 2.21 15800 12300 27500 1.29
1.2500 3.0000 1.8750 1.5000 23800 3550 2750 6170
31.750 80.962 55.562 39.688 125000 0.67 1.01 1.50 18600 21300 32400 0.87
1.2500 3.1875 2.1875 1.5625 28100 4190 4790 7290
31.750 82.550 66.678 55.562 169000 0.37 1.85 2.75 25100 15700 43700 1.60
1.2500 3.2500 2.6251 2.1875 37900 5650 3530 9830
32.004 71.438 42.862 36.512 94700 0.36 1.87 2.79 14100 8700 24600 1.62
1.2600 2.8125 1.6875 1.4375 21300 3170 1960 5520
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B240 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
43112 43319D X1S-43112
17118 17245D X1S-17119
15117 15251D X1S-15117
26118 26282D X2S-26118
26118 26284D X1S-26118
43117 43319D
14117A 14276D X1S-14117A
14118 14276D X1S-14117A
08118 08231D X1S-08118
17119 17245D X4S-17119
24118 24262D X1S-24118
2558 2524YD
28118 28318D
43118 43319D X1S-43118
15118 15251D
15119 15251D X1S-15118
08125 08231D X6S-08125
15123 15251D X1S-15123
15125 15251D X1S-15125
15126 15251D X1S-15126
14125A 14276D X1S-14125A
2580 2524YD X2S-2580
2582 2524YD
02875 02823D X3S-02875
02876 02823D
43125 43319D X1S-43125
3476 3423D X1S-3476
26126 26282D
0.8 42.5 1.5 74.0 16.8 7.57 0.0774 1.37
0.03 1.67 0.06 2.91
3.01
B
1.5 37.0 0.8 57.0 11.8 7.49 0.0579 0.54
0.06 1.46 0.03 2.24
1.18
1.3 36.5 0.8 59.0 14.6 7.58 0.0606 0.65
0.05 1.44 0.03 2.32
1.43
1.5 38.0 0.4 65.0 16.1 10.1 0.0630 0.81
0.06 1.50 0.02 2.56
1.78
1.5 38.0 0.8 65.0 16.1 10.1 0.0630 0.84
0.06 1.50 0.03 2.56
1.85
1.5 44.5 1.5 74.0 16.8 7.57 0.0774 1.31
0.06 1.75 0.06 2.91
2.88
Caption:
3.5 43.0 0.8 63.0 18 9.4 0.0668 0.79
0.14 1.69 0.03 2.48
1.75
0.8 37.0 0.8 63.0 18 9.4 0.0668 0.79
0.03 1.46 0.03 2.48
1.75
3.5 41.5 0.4 55.0 10.7 10.6 0.0601 0.37
0.14 1.63 0.02 2.17
0.81
1.5 37.0 0.8 57.0 11.8 7.49 0.0579 0.53
0.06 1.46 0.03 2.24
1.18
1.5 37.5 0.8 61.0 14 8.28 0.0589 0.69
0.06 1.48 0.03 2.40
1.53
2.3 40.0 0.8 64.0 23.6 9.63 0.0656 1.16
0.09 1.57 0.03 2.52
2.56
1.5 40.0 0.8 73.0 20.7 12.5 0.0709 1.10
0.06 1.57 0.03 2.87
2.43
1.5 45.0 1.5 74.0 16.8 7.57 0.0774 1.33
0.06 1.77 0.06 2.91
2.93
3.5 41.5 0.8 59.0 14.6 7.58 0.0606 0.62
0.14 1.63 0.03 2.32
1.37
1.5 37.5 0.8 59.0 14.6 7.58 0.0606 0.65
0.06 1.48 0.03 2.32
1.43
1.0 37.5 0.4 55.0 10.7 10.6 0.0601 0.36
0.04 1.48 0.02 2.17
0.79
0.0 42.5 0.8 59.0 14.6 7.58 0.0606 0.59
0.00 1.67 0.03 2.32
1.30
3.5 42.5 0.8 59.0 14.6 7.58 0.0606 0.61
0.14 1.67 0.03 2.32
1.35
0.8 37.0 0.8 59.0 14.6 7.58 0.0606 0.62
0.03 1.46 0.03 2.32
1.37
3.5 44.5 0.8 63.0 18 9.4 0.0668 0.76
0.14 1.75 0.03 2.48
1.68
0.8 38.5 0.8 64.0 23.6 9.63 0.0656 1.18
0.03 1.52 0.03 2.52
2.61
3.5 44.0 0.8 64.0 23.6 9.63 0.0656 1.13
0.14 1.73 0.03 2.52
2.48
3.5 45.5 0.8 70.0 20.6 10.1 0.0740 1.05
0.14 1.79 0.03 2.76
2.32
0.8 40.0 0.8 70.0 20.6 10.1 0.0740 1.06
0.03 1.57 0.03 2.76
2.34
1.5 44.0 1.5 74.0 16.8 7.57 0.0774 1.31
0.06 1.73 0.06 2.91
2.88
1.3 43.0 0.8 75.0 29.9 11.2 0.0781 1.84
0.05 1.69 0.03 2.95
4.05
1.5 39.5 0.4 65.0 16.1 10.1 0.0630 0.78
0.06 1.56 0.02 2.56
1.71
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B241
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
32.004 71.975 42.761 36.512 94700 0.36 1.87 2.79 14100 8700 24600 1.62
1.2600 2.8336 1.6835 1.4375 21300 3170 1960 5520
33.338 69.012 46.040 38.100 88000 0.38 1.77 2.63 13100 8570 22800 1.53
1.3125 2.7170 1.8126 1.5000 19800 2950 1930 5130
33.338 69.850 66.675 57.150 135000 0.27 2.47 3.67 20100 9410 35000 2.14
1.3125 2.7500 2.6250 2.2500 30300 4520 2120 7870
33.338 69.850 66.675 57.150 135000 0.27 2.47 3.67 20100 9410 35000 2.14
1.3125 2.7500 2.6250 2.2500 30300 4520 2120 7870
33.338 69.850 66.675 57.150 135000 0.27 2.47 3.67 20100 9410 35000 2.14
1.3125 2.7500 2.6250 2.2500 30300 4520 2120 7870
33.338 69.850 66.675 57.150 135000 0.27 2.47 3.67 20100 9410 35000 2.14
1.3125 2.7500 2.6250 2.2500 30300 4520 2120 7870
33.338 71.438 42.862 36.512 94700 0.36 1.87 2.79 14100 8700 24600 1.62
1.3125 2.8125 1.6875 1.4375 21300 3170 1960 5520
33.338 71.438 42.862 36.512 94700 0.36 1.87 2.79 14100 8700 24600 1.62
1.3125 2.8125 1.6875 1.4375 21300 3170 1960 5520
33.338 71.975 42.761 36.512 94700 0.36 1.87 2.79 14100 8700 24600 1.62
1.3125 2.8336 1.6835 1.4375 21300 3170 1960 5520
33.338 71.975 42.761 36.512 94700 0.36 1.87 2.79 14100 8700 24600 1.62
1.3125 2.8336 1.6835 1.4375 21300 3170 1960 5520
33.338 73.025 42.862 35.522 85700 0.51 1.33 1.98 12800 11100 22200 1.15
1.3125 2.8750 1.6875 1.3985 19300 2870 2500 5000
33.338 80.962 55.562 39.688 125000 0.67 1.01 1.50 18600 21300 32400 0.87
1.3125 3.1875 2.1875 1.5625 28100 4190 4790 7290
33.338 80.962 55.562 39.688 125000 0.67 1.01 1.50 18600 21300 32400 0.87
1.3125 3.1875 2.1875 1.5625 28100 4190 4790 7290
34.925 69.012 46.040 38.100 88000 0.38 1.77 2.63 13100 8570 22800 1.53
1.3750 2.7170 1.8126 1.5000 19800 2950 1930 5130
34.925 69.012 46.040 38.100 88000 0.38 1.77 2.63 13100 8570 22800 1.53
1.3750 2.7170 1.8126 1.5000 19800 2950 1930 5130
34.925 76.200 47.625 38.100 106000 0.45 1.49 2.21 15800 12300 27500 1.29
1.3750 3.0000 1.8750 1.5000 23800 3550 2750 6170
34.925 76.200 47.625 38.100 106000 0.45 1.49 2.21 15800 12300 27500 1.29
1.3750 3.0000 1.8750 1.5000 23800 3550 2750 6170
34.925 80.035 46.040 34.925 102000 0.40 1.68 2.50 15200 10500 26500 1.45
1.3750 3.1510 1.8126 1.3750 23000 3430 2360 5970
34.925 80.035 57.150 44.958 126000 0.56 1.20 1.79 18700 18000 32600 1.04
1.3750 3.1510 2.2500 1.7700 28300 4210 4040 7330
34.925 95.250 61.915 50.800 205000 0.28 2.37 3.53 30500 14800 53000 2.05
1.3750 3.7500 2.4376 2.0000 46000 6850 3330 11900
34.975 69.012 46.040 38.100 88000 0.38 1.77 2.63 13100 8570 22800 1.53
1.3770 2.7170 1.8126 1.5000 19800 2950 1930 5130
34.975 80.035 46.040 34.925 102000 0.40 1.68 2.50 15200 10500 26500 1.45
1.3770 3.1510 1.8126 1.3750 23000 3430 2360 5970
35.000 95.250 61.915 50.800 205000 0.28 2.37 3.53 30500 14800 53000 2.05
1.3780 3.7500 2.4376 2.0000 46000 6850 3330 11900
36.512 69.012 46.035 38.100 91400 0.40 1.68 2.50 13600 9370 23700 1.45
1.4375 2.7170 1.8124 1.5000 20600 3060 2110 5330
36.512 69.012 46.035 38.100 91400 0.40 1.68 2.50 13600 9370 23700 1.45
1.4375 2.7170 1.8124 1.5000 20600 3060 2110 5330
36.512 82.550 66.678 55.562 169000 0.37 1.85 2.75 25100 15700 43700 1.60
1.4375 3.2500 2.6251 2.1875 37900 5650 3530 9830
36.512 82.931 57.150 47.625 146000 0.33 2.02 3.00 21700 12500 37800 1.74
1.4375 3.2650 2.2500 1.8750 32800 4880 2800 8500
36.512 92.075 55.562 39.688 136000 0.78 0.86 1.29 20200 27000 35200 0.75
1.4375 3.6250 2.1875 1.5625 30500 4540 6070 7910
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B242 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
26126 26284D
14131 14276D X1S-14131
2581 2523D
2581 2524YD
2585 2523D X1S-2585
2585 2524YD
26131 26282D X1S-26131
26132 26282D
26131 26284D X1S-26131
26132 26284D
25132 25289D X1S-25132
43131 43319D X1S-43131
43132 43319D X1S-43131
14137A 14276D X2S-14137
14138A 14276D X2S-14137
02877 02823D X1S-02877
02878 02823D X1S-02877
28137 28318D X1S-28138
27875 27820D X2S-27875
449 432D
14139 14276D X2S-14137
28138 28318D
441 432D
13682 13621D
13682 13621DC X1S-13682
3479 3423D X2S-3479
25570 25520D X1S-25570
44143 44363D X1S-44143
1.5 39.5 0.8 65.0 16.1 10.1 0.0630 0.79
0.06 1.56 0.03 2.56
1.75
B
0.8 40.5 0.8 63.0 18 9.4 0.0668 0.74
0.03 1.59 0.03 2.48
1.63
0.8 39.5 0.8 64.0 23.6 9.63 0.0656 1.10
0.03 1.56 0.03 2.52
2.43
0.8 39.5 0.8 64.0 23.6 9.63 0.0656 1.10
0.03 1.56 0.03 2.52
2.43
3.5 45.0 0.8 64.0 23.6 9.63 0.0656 1.13
0.14 1.77 0.03 2.52
2.49
3.5 45.0 0.8 64.0 23.6 9.63 0.0656 1.09
0.14 1.77 0.03 2.52
2.41
Caption:
3.5 44.5 0.4 65.0 16.1 10.1 0.0630 0.76
0.14 1.75 0.02 2.56
1.67
1.5 40.5 0.4 65.0 16.1 10.1 0.0630 0.76
0.06 1.59 0.02 2.56
1.67
3.5 44.5 0.8 65.0 16.1 10.1 0.0630 0.78
0.14 1.75 0.03 2.56
1.71
1.5 40.5 0.8 65.0 16.1 10.1 0.0630 0.77
0.06 1.59 0.03 2.56
1.71
2.3 43.5 0.8 66.5 14.6 13.4 0.0681 0.87
0.09 1.71 0.03 2.62
1.93
3.5 51.0 1.5 74.0 16.8 7.57 0.0774 1.26
0.14 2.01 0.06 2.91
2.78
2.0 48.0 1.5 74.0 16.8 7.57 0.0774 1.27
0.08 1.89 0.06 2.91
2.80
1.5 43.0 0.8 63.0 18 9.4 0.0668 0.71
0.06 1.69 0.03 2.48
1.57
3.5 47.0 0.8 63.0 18 9.4 0.0668 0.71
0.14 1.85 0.03 2.48
1.57
3.5 48.5 0.8 70.0 20.6 10.1 0.0740 1.00
0.14 1.91 0.03 2.76
2.21
0.8 42.5 0.8 70.0 20.6 10.1 0.0740 1.02
0.03 1.67 0.03 2.76
2.24
1.5 43.5 0.8 73.0 20.7 12.5 0.0709 1.05
0.06 1.71 0.03 2.87
2.31
0.8 45.5 0.8 75.0 24.6 12.6 0.0839 1.30
0.03 1.79 0.03 2.95
2.87
0.8 44.0 0.8 87.0 42.5 11.3 0.0805 2.28
0.03 1.73 0.03 3.43
5.02
1.3 42.5 0.8 63.0 18 9.4 0.0668 0.71
0.05 1.67 0.03 2.48
1.57
1.5 43.5 0.8 73.0 20.7 12.5 0.0709 1.02
0.06 1.71 0.03 2.87
2.25
3.5 50.0 0.8 87.0 42.5 11.3 0.0805 2.26
0.14 1.97 0.03 3.43
4.99
3.5 48.0 0.8 65.0 20.7 12.2 0.0713 0.66
0.14 1.89 0.03 2.56
1.45
3.5 48.0 0.8 65.0 6.1 2.3 20.7 12.2 0.0713 0.71
0.14 1.89 0.03 2.56 0.24 0.09
1.56
0.8 45.5 0.8 75.0 29.9 11.2 0.0781 1.71
0.03 1.79 0.03 2.95
3.77
3.5 51.0 0.8 77.0 35.2 14.3 0.0801 1.53
0.14 2.01 0.03 3.03
3.36
2.3 54.0 1.5 85.0 22.9 8.71 0.0899 1.72
0.09 2.13 0.06 3.35
3.78
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B243
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
38.100 63.500 38.100 31.750 43800 0.35 1.95 2.90 6520 3860 11300 1.69
1.5000 2.5000 1.5000 1.2500 9840 1470 869 2550
38.100 69.012 46.035 38.100 91400 0.40 1.68 2.50 13600 9370 23700 1.45
1.5000 2.7170 1.8124 1.5000 20600 3060 2110 5330
38.100 69.012 46.035 38.100 91400 0.40 1.68 2.50 13600 9370 23700 1.45
1.5000 2.7170 1.8124 1.5000 20600 3060 2110 5330
38.100 69.012 46.035 38.100 91400 0.40 1.68 2.50 13600 9370 23700 1.45
1.5000 2.7170 1.8124 1.5000 20600 3060 2110 5330
38.100 80.035 46.040 34.925 102000 0.40 1.68 2.50 15200 10500 26500 1.45
1.5000 3.1510 1.8126 1.3750 23000 3430 2360 5970
38.100 80.035 46.040 34.925 102000 0.40 1.68 2.50 15200 10500 26500 1.45
1.5000 3.1510 1.8126 1.3750 23000 3430 2360 5970
38.100 80.035 57.150 44.958 126000 0.56 1.20 1.79 18700 18000 32600 1.04
1.5000 3.1510 2.2500 1.7700 28300 4210 4040 7330
38.100 80.035 57.150 44.958 126000 0.56 1.20 1.79 18700 18000 32600 1.04
1.5000 3.1510 2.2500 1.7700 28300 4210 4040 7330
38.100 82.550 66.678 55.562 169000 0.37 1.85 2.75 25100 15700 43700 1.60
1.5000 3.2500 2.6251 2.1875 37900 5650 3530 9830
38.100 82.931 57.150 47.625 146000 0.33 2.02 3.00 21700 12500 37800 1.74
1.5000 3.2650 2.2500 1.8750 32800 4880 2800 8500
38.100 92.075 55.562 39.688 136000 0.78 0.86 1.29 20200 27000 35200 0.75
1.5000 3.6250 2.1875 1.5625 30500 4540 6070 7910
38.100 95.250 61.915 50.800 205000 0.28 2.37 3.53 30500 14800 53000 2.05
1.5000 3.7500 2.4376 2.0000 46000 6850 3330 11900
38.100 95.250 61.915 50.800 205000 0.28 2.37 3.53 30500 14800 53000 2.05
1.5000 3.7500 2.4376 2.0000 46000 6850 3330 11900
38.100 95.250 63.500 52.385 209000 0.33 2.05 3.05 31100 17600 54200 1.77
1.5000 3.7500 2.5000 2.0624 47000 7000 3950 12200
38.100 95.250 65.088 44.450 161000 0.74 0.91 1.36 24000 30500 41900 0.79
1.5000 3.7500 2.5625 1.7500 36300 5410 6850 9410
38.100 111.125 79.375 63.500 277000 0.30 2.28 3.39 41300 21000 71900 1.97
1.5000 4.3750 3.1250 2.5000 62400 9290 4720 16200
38.481 63.500 38.100 31.750 43800 0.35 1.95 2.90 6520 3860 11300 1.69
1.5150 2.5000 1.5000 1.2500 9840 1470 869 2550
39.688 92.075 55.562 39.688 136000 0.78 0.86 1.29 20200 27000 35200 0.75
1.5625 3.6250 2.1875 1.5625 30500 4540 6070 7910
39.688 92.075 55.562 39.688 136000 0.78 0.86 1.29 20200 27000 35200 0.75
1.5625 3.6250 2.1875 1.5625 30500 4540 6070 7910
39.980 80.035 43.459 34.925 102000 0.40 1.68 2.50 15200 10500 26500 1.45
1.5740 3.1510 1.7110 1.3750 23000 3430 2360 5970
39.980 80.035 46.040 34.925 102000 0.40 1.68 2.50 15200 10500 26500 1.45
1.5740 3.1510 1.8126 1.3750 23000 3430 2360 5970
40.000 80.035 46.040 34.925 102000 0.40 1.68 2.50 15200 10500 26500 1.45
1.5748 3.1510 1.8126 1.3750 23000 3430 2360 5970
40.000 90.119 50.795 44.450 132000 0.31 2.20 3.28 19600 10300 34200 1.91
1.5748 3.5480 1.9998 1.7500 29700 4420 2320 7690
40.000 90.119 50.795 44.450 132000 0.31 2.20 3.28 19600 10300 34200 1.91
1.5748 3.5480 1.9998 1.7500 29700 4420 2320 7690
40.000 90.119 50.795 44.450 132000 0.31 2.20 3.28 19600 10300 34200 1.91
1.5748 3.5480 1.9998 1.7500 29700 4420 2320 7690
40.000 90.119 50.795 44.450 132000 0.31 2.20 3.28 19600 10300 34200 1.91
1.5748 3.5480 1.9998 1.7500 29700 4420 2320 7690
40.000 92.075 55.562 39.688 136000 0.78 0.86 1.29 20200 27000 35200 0.75
1.5748 3.6250 2.1875 1.5625 30500 4540 6070 7910
40.000 95.250 61.915 50.800 205000 0.28 2.37 3.53 30500 14800 53000 2.05
1.5748 3.7500 2.4376 2.0000 46000 6850 3330 11900
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B244 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
13889 13835D X1S-13889
13685 13621DC X1S-13687
13685 13621D X2S-13687
13687 13621D X1S-13687
28150 28318D X4S-28150
28151 28318D
27880 27820D X1S-27880
27881 27820D X1S-27881
3490 3423D X1S-3490
25572 25520D X1S-25572
44150 44363D X1S-44150
440 432D
444 432D
33880 33821D X1S-33880
53150 53376D X2S-53150
542 533D X1S-542
13890 13835D X1S-13890
44156 44363D X1S-44156
44158 44363D
28156 28318D
28159 28318D X1S-28158
28158 28318D X2S-28158
350 353D
350 353DC X1S-357
350A 353D X1S-357
357 353D X1S-357
44157 44363D
442-S 432D
1.5 45.0 0.4 60.0 14.8 23.3 0.0601 0.42
0.06 1.77 0.02 2.36
0.93
B
3.5 49.5 0.8 65.0 6.1 2.3 20.7 10.9 0.0713 0.68
0.14 1.95 0.03 2.56 0.24 0.09
1.49
3.5 49.5 0.8 65.0 20.7 10.9 0.0713 0.65
0.14 1.95 0.03 2.56
1.44
2.0 46.5 0.8 65.0 20.7 10.9 0.0713 0.66
0.08 1.83 0.03 2.56
1.46
1.5 45.5 0.8 73.0 20.7 12.5 0.0709 0.98
0.06 1.79 0.03 2.87
2.17
3.5 50.0 0.8 73.0 20.7 12.5 0.0709 0.95
0.14 1.97 0.03 2.87
2.10
Caption:
0.8 48.0 0.8 75.0 24.6 12.6 0.0839 1.22
0.03 1.89 0.03 2.95
2.69
3.5 53.0 0.8 75.0 24.6 12.6 0.0839 1.21
0.14 2.09 0.03 2.95
2.66
3.5 52.0 0.8 75.0 29.9 11.2 0.0781 1.65
0.14 2.05 0.03 2.95
3.64
0.8 46.0 0.8 77.0 35.2 14.3 0.0801 1.48
0.03 1.81 0.03 3.03
3.26
2.3 55.0 1.5 85.0 22.9 8.71 0.0899 1.67
0.09 2.17 0.06 3.35
3.69
0.8 46.5 0.8 87.0 42.5 11.3 0.0805 2.19
0.03 1.83 0.03 3.43
4.83
3.5 52.0 0.8 87.0 42.5 11.3 0.0805 2.18
0.14 2.05 0.03 3.43
4.80
3.5 54.0 0.8 90.0 52.5 18.5 0.0910 2.25
0.14 2.13 0.03 3.54
4.97
1.5 55.0 0.8 89.0 26.7 9.63 0.0930 2.11
0.06 2.17 0.03 3.50
4.64
3.5 55.0 1.5 100.0 64.3 16.1 0.0938 3.98
0.14 2.17 0.06 3.94
8.77
0.4 43.0 0.4 60.0 14.8 23.3 0.0601 0.41
0.02 1.69 0.02 2.36
0.91
2.3 56.0 1.5 85.0 22.9 8.71 0.0899 1.60
0.09 2.20 0.06 3.35
3.53
3.5 58.0 1.5 85.0 22.9 8.71 0.0899 1.59
0.14 2.28 0.06 3.35
3.51
2.3 49.0 0.8 73.0 20.7 12.5 0.0709 0.90
0.09 1.93 0.03 2.87
1.98
3.5 52.0 0.8 73.0 20.7 12.5 0.0709 0.94
0.14 2.05 0.03 2.87
2.07
1.5 47.5 0.8 73.0 20.7 12.5 0.0709 0.95
0.06 1.87 0.03 2.87
2.09
4.0 54.0 0.8 82.0 30 12.2 0.0732 1.46
0.16 2.13 0.03 3.23
3.23
4.0 54.0 0.8 82.0 7.9 3.8 30 12.2 0.0732 1.52
0.16 2.13 0.03 3.23 0.31 0.15
3.35
0.8 47.5 0.8 82.0 30 12.2 0.0732 1.54
0.03 1.87 0.03 3.23
3.39
2.3 51.0 0.8 82.0 30 12.2 0.0732 1.53
0.09 2.01 0.03 3.23
3.38
2.3 56.0 1.5 85.0 22.9 8.71 0.0899 1.59
0.09 2.20 0.06 3.35
3.51
3.5 54.0 0.8 87.0 42.5 11.3 0.0805 2.12
0.14 2.13 0.03 3.43
4.68
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B245
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
41.275 76.200 49.212 39.688 122000 0.39 1.72 2.56 18100 12200 31600 1.49
1.6250 3.0000 1.9375 1.5625 27400 4080 2740 7100
41.275 76.200 49.212 39.688 122000 0.39 1.72 2.56 18100 12200 31600 1.49
1.6250 3.0000 1.9375 1.5625 27400 4080 2740 7100
41.275 90.000 50.010 42.070 138000 0.32 2.11 3.14 20600 11300 35900 1.83
1.6250 3.5433 1.9689 1.6563 31100 4640 2540 8070
41.275 92.075 55.562 39.688 136000 0.78 0.86 1.29 20200 27000 35200 0.75
1.6250 3.6250 2.1875 1.5625 30500 4540 6070 7910
41.275 95.250 61.915 50.800 205000 0.28 2.37 3.53 30500 14800 53000 2.05
1.6250 3.7500 2.4376 2.0000 46000 6850 3330 11900
41.275 95.250 65.088 44.450 161000 0.74 0.91 1.36 24000 30500 41900 0.79
1.6250 3.7500 2.5625 1.7500 36300 5410 6850 9410
41.275 107.950 65.090 53.975 219000 0.34 2.01 3.00 32600 18700 56700 1.74
1.6250 4.2500 2.5626 2.1250 49200 7320 4200 12700
41.275 111.125 79.375 63.500 277000 0.30 2.28 3.39 41300 21000 71900 1.97
1.6250 4.3750 3.1250 2.5000 62400 9290 4720 16200
42.850 107.950 65.090 53.975 219000 0.34 2.01 3.00 32600 18700 56700 1.74
1.6870 4.2500 2.5626 2.1250 49200 7320 4200 12700
42.862 82.550 44.450 34.925 105000 0.43 1.57 2.34 15700 11500 27300 1.36
1.6875 3.2500 1.7500 1.3750 23700 3530 2600 6140
42.862 82.931 57.150 47.625 146000 0.33 2.02 3.00 21700 12500 37800 1.74
1.6875 3.2650 2.2500 1.8750 32800 4880 2800 8500
44.450 79.375 41.272 33.338 83800 0.37 1.80 2.69 12500 7990 21700 1.56
1.7500 3.1250 1.6249 1.3125 18800 2810 1800 4890
44.450 82.931 57.150 47.625 146000 0.33 2.02 3.00 21700 12500 37800 1.74
1.7500 3.2650 2.2500 1.8750 32800 4880 2800 8500
44.450 82.931 57.150 47.625 146000 0.33 2.02 3.00 21700 12500 37800 1.74
1.7500 3.2650 2.2500 1.8750 32800 4880 2800 8500
44.450 82.931 57.150 47.625 146000 0.33 2.02 3.00 21700 12500 37800 1.74
1.7500 3.2650 2.2500 1.8750 32800 4880 2800 8500
44.450 90.119 50.795 44.450 132000 0.31 2.20 3.28 19600 10300 34200 1.91
1.7500 3.5480 1.9998 1.7500 29700 4420 2320 7690
44.450 90.119 50.795 44.450 132000 0.31 2.20 3.28 19600 10300 34200 1.91
1.7500 3.5480 1.9998 1.7500 29700 4420 2320 7690
44.450 90.119 50.795 44.450 132000 0.31 2.20 3.28 19600 10300 34200 1.91
1.7500 3.5480 1.9998 1.7500 29700 4420 2320 7690
44.450 90.119 50.795 44.450 132000 0.31 2.20 3.28 19600 10300 34200 1.91
1.7500 3.5480 1.9998 1.7500 29700 4420 2320 7690
44.450 93.264 65.088 52.388 197000 0.34 1.99 2.97 29300 17000 51000 1.73
1.7500 3.6718 2.5625 2.0625 44300 6590 3820 11500
44.450 95.250 61.915 50.800 205000 0.28 2.37 3.53 30500 14800 53000 2.05
1.7500 3.7500 2.4376 2.0000 46000 6850 3330 11900
44.450 95.250 61.915 50.800 205000 0.28 2.37 3.53 30500 14800 53000 2.05
1.7500 3.7500 2.4376 2.0000 46000 6850 3330 11900
44.450 95.250 63.500 52.385 209000 0.33 2.05 3.05 31100 17600 54200 1.77
1.7500 3.7500 2.5000 2.0624 47000 7000 3950 12200
44.450 95.250 65.088 44.450 161000 0.74 0.91 1.36 24000 30500 41900 0.79
1.7500 3.7500 2.5625 1.7500 36300 5410 6850 9410
44.450 95.250 65.088 44.450 161000 0.74 0.91 1.36 24000 30500 41900 0.79
1.7500 3.7500 2.5625 1.7500 36300 5410 6850 9410
44.450 95.250 65.088 44.450 161000 0.74 0.91 1.36 24000 30500 41900 0.79
1.7500 3.7500 2.5625 1.7500 36300 5410 6850 9410
44.450 107.950 65.090 53.975 219000 0.34 2.01 3.00 32600 18700 56700 1.74
1.7500 4.2500 2.5626 2.1250 49200 7320 4200 12700
44.450 111.125 79.375 63.500 277000 0.30 2.28 3.39 41300 21000 71900 1.97
1.7500 4.3750 3.1250 2.5000 62400 9290 4720 16200
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B246 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
24780 24720D
24780 24720XD
365A 363D X1S-365A
44162 44363D X2S-44162
447 432D X1S-447
53162 53376D
464 452D X1S-464
541 533D
461 452D
22168 22325D X2S-22168
25578 25520D X1S-25578
18685 18620D X2S-18685
25580 25520DC X1S-25581
25580 25520D X3S-25580
25581 25520D X1S-25581
355 353D X3S-355
355A 353D X2S-355
355X 353D
355X 353DC X3S-355
3782 3729D X1S-3782
435 432D R800002
438 432D R800002
33885 33821D X1S-33885
53176 53376D
53177 53376D X2S-53176
53178 53376D X2S-53176
460 452D
535 533D
3.5 54.0 0.8 72.0 26.4 12.5 0.0767 0.93
0.14 2.13 0.03 2.83
2.04
B
3.5 54.0 0.8 72.0 26.4 12.5 0.0767 0.91
0.14 2.13 0.03 2.83
2.00
3.5 55.0 0.8 84.0 33.8 14 0.0773 1.41
0.14 2.17 0.03 3.31
3.11
2.3 57.0 1.5 85.0 22.9 8.71 0.0899 1.59
0.09 2.24 0.06 3.35
3.51
3.5 55.0 0.8 87.0 42.5 11.3 0.0805 2.11
0.14 2.17 0.03 3.43
4.65
1.5 57.0 0.8 89.0 26.7 9.63 0.0930 1.96
0.06 2.24 0.03 3.50
4.32
Caption:
2.3 56.0 0.8 100.0 58.6 17.1 0.0946 3.08
0.09 2.20 0.03 3.94
6.79
3.5 58.0 1.5 100.0 64.3 16.1 0.0938 3.86
0.14 2.28 0.06 3.94
8.51
0.8 54.0 0.8 100.0 58.6 17.1 0.0946 2.97
0.03 2.13 0.03 3.94
6.56
2.3 52.0 0.8 76.0 23.7 14.4 0.0758 1.01
0.09 2.05 0.03 2.99
2.24
2.3 53.0 0.8 77.0 35.2 14.3 0.0801 1.33
0.09 2.09 0.03 3.03
2.93
2.8 54.0 0.8 74.0 23.9 17.7 0.0725 0.78
0.11 2.13 0.03 2.91
1.73
3.5 57.0 0.8 77.0 9.4 2.3 35.2 14.3 0.0801 1.31
0.14 2.24 0.03 3.03 0.37 0.09
2.88
3.5 57.0 0.8 77.0 35.2 14.3 0.0801 1.31
0.14 2.24 0.03 3.03
2.88
0.5 51.0 0.8 77.0 35.2 14.3 0.0801 1.32
0.02 2.01 0.03 3.03
2.92
2.3 54.0 0.8 82.0 30 12.2 0.0732 1.41
0.09 2.13 0.03 3.23
3.10
0.8 51.0 0.8 82.0 30 12.2 0.0732 1.41
0.03 2.01 0.03 3.23
3.11
3.5 56.0 0.8 82.0 30 12.2 0.0732 1.37
0.14 2.20 0.03 3.23
3.01
3.5 56.0 0.8 82.0 7.9 3.8 30 12.2 0.0732 1.37
0.14 2.20 0.03 3.23 0.31 0.15
3.01
3.5 58.0 0.8 88.0 49.9 14.5 0.0903 2.06
0.14 2.28 0.03 3.46
4.53
0.8 52.0 0.8 87.0 42.5 11.3 0.0805 2.00
0.03 2.05 0.03 3.43
4.41
3.5 57.0 0.8 87.0 42.5 11.3 0.0805 1.98
0.14 2.24 0.03 3.43
4.37
0.8 53.0 0.8 90.0 52.5 18.5 0.0910 2.12
0.03 2.09 0.03 3.54
4.66
1.3 59.0 0.8 89.0 26.7 9.63 0.0930 1.90
0.05 2.32 0.03 3.50
4.18
3.5 63.0 0.8 89.0 26.7 9.63 0.0930 1.88
0.14 2.48 0.03 3.50
4.15
2.0 60.0 0.8 89.0 26.7 9.63 0.0930 1.89
0.08 2.36 0.03 3.50
4.18
3.5 60.0 0.8 100.0 58.6 17.1 0.0946 2.91
0.14 2.36 0.03 3.94
6.42
3.5 60.0 1.5 100.0 64.3 16.1 0.0938 3.74
0.14 2.36 0.06 3.94
8.24
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B247
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
44.450 112.712 65.088 46.038 172000 0.88 0.76 1.14 25500 38600 44500 0.66
1.7500 4.4375 2.5625 1.8125 38600 5740 8690 10000
44.983 82.931 57.150 47.625 146000 0.33 2.02 3.00 21700 12500 37800 1.74
1.7710 3.2650 2.2500 1.8750 32800 4880 2800 8500
44.983 93.264 65.088 52.388 197000 0.34 1.99 2.97 29300 17000 51000 1.73
1.7710 3.6718 2.5625 2.0625 44300 6590 3820 11500
45.000 90.000 50.010 42.070 138000 0.32 2.11 3.14 20600 11300 35900 1.83
1.7717 3.5433 1.9689 1.6563 31100 4640 2540 8070
45.000 90.119 50.795 44.450 132000 0.31 2.20 3.28 19600 10300 34200 1.91
1.7717 3.5480 1.9998 1.7500 29700 4420 2320 7690
45.000 90.119 50.795 44.450 132000 0.31 2.20 3.28 19600 10300 34200 1.91
1.7717 3.5480 1.9998 1.7500 29700 4420 2320 7690
45.000 100.000 50.800 39.690 142000 0.34 1.99 2.97 21100 12200 36800 1.73
1.7717 3.9370 2.0000 1.5626 31900 4750 2750 8260
45.618 82.931 57.150 47.625 146000 0.33 2.02 3.00 21700 12500 37800 1.74
1.7960 3.2650 2.2500 1.8750 32800 4880 2800 8500
46.038 79.375 41.272 33.338 83800 0.37 1.80 2.69 12500 7990 21700 1.56
1.8125 3.1250 1.6249 1.3125 18800 2810 1800 4890
46.038 79.375 41.272 33.338 83800 0.37 1.80 2.69 12500 7990 21700 1.56
1.8125 3.1250 1.6249 1.3125 18800 2810 1800 4890
46.038 90.119 50.795 44.450 132000 0.31 2.20 3.28 19600 10300 34200 1.91
1.8125 3.5480 1.9998 1.7500 29700 4420 2320 7690
46.038 90.119 50.795 44.450 132000 0.31 2.20 3.28 19600 10300 34200 1.91
1.8125 3.5480 1.9998 1.7500 29700 4420 2320 7690
46.038 95.250 61.915 50.800 205000 0.28 2.37 3.53 30500 14800 53000 2.05
1.8125 3.7500 2.4376 2.0000 46000 6850 3330 11900
47.625 90.000 50.010 42.070 138000 0.32 2.11 3.14 20600 11300 35900 1.83
1.8750 3.5433 1.9689 1.6563 31100 4640 2540 8070
47.625 90.000 50.010 42.070 138000 0.32 2.11 3.14 20600 11300 35900 1.83
1.8750 3.5433 1.9689 1.6563 31100 4640 2540 8070
47.625 93.264 65.088 52.388 197000 0.34 1.99 2.97 29300 17000 51000 1.73
1.8750 3.6718 2.5625 2.0625 44300 6590 3820 11500
47.625 93.264 65.088 52.388 197000 0.34 1.99 2.97 29300 17000 51000 1.73
1.8750 3.6718 2.5625 2.0625 44300 6590 3820 11500
47.625 100.000 49.200 39.675 147000 0.35 1.91 2.84 21800 13200 38000 1.65
1.8750 3.9370 1.9370 1.5620 33000 4910 2980 8550
47.625 100.000 52.388 42.862 147000 0.35 1.91 2.84 21800 13200 38000 1.65
1.8750 3.9370 2.0625 1.6875 33000 4910 2980 8550
47.625 107.950 65.090 53.975 219000 0.34 2.01 3.00 32600 18700 56700 1.74
1.8750 4.2500 2.5626 2.1250 49200 7320 4200 12700
47.625 107.950 65.090 53.975 219000 0.34 2.01 3.00 32600 18700 56700 1.74
1.8750 4.2500 2.5626 2.1250 49200 7320 4200 12700
47.625 109.982 63.500 42.865 172000 0.88 0.76 1.14 25500 38600 44500 0.66
1.8750 4.3300 2.5000 1.6876 38600 5740 8690 10000
47.625 111.125 79.375 63.500 277000 0.30 2.28 3.39 41300 21000 71900 1.97
1.8750 4.3750 3.1250 2.5000 62400 9290 4720 16200
47.625 112.712 65.088 46.038 172000 0.88 0.76 1.14 25500 38600 44500 0.66
1.8750 4.4375 2.5625 1.8125 38600 5740 8690 10000
47.625 117.475 73.025 53.975 240000 0.63 1.08 1.60 35800 38300 62300 0.93
1.8750 4.6250 2.8750 2.1250 54000 8040 8620 14000
47.625 123.825 77.788 55.562 266000 0.74 0.92 1.36 39600 50000 69000 0.79
1.8750 4.8750 3.0625 2.1875 59800 8910 11200 15500
49.212 93.264 65.088 52.388 197000 0.34 1.99 2.97 29300 17000 51000 1.73
1.9375 3.6718 2.5625 2.0625 44300 6590 3820 11500
49.212 111.125 79.375 63.500 277000 0.30 2.28 3.39 41300 21000 71900 1.97
1.9375 4.3750 3.1250 2.5000 62400 9290 4720 16200
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B248 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
55175 55444D X2S-55176
25584 25520D X1S-25584
3776 3729D X1S-3776
367 363D X3S-367
358 353D X2S-358
358A 353D X1S-358
376X 372D
25590 25520D X1S-25590
18690 18620DC X1S-18690
18690 18620D X2S-18690
359A 353D
359-S 353D X1S-359-S
436 432D X1S-436
369A 363D X1S-369A
369-S 363D X1S-369A
3778 3729D
3779 3729D X1S-3779
386A 384ED X1S-386A
386A 384D X2S-386A
463 452D
467 452D X1S-467
55187 55433D X2S-55187
536 533D
55187 55444D X1S-55187
66187 66462D X1S-66187
72187 72488D X1S-72187
3781 3729D X1S-366
545 533D
3.5 67.0 1.5 105.0 36.8 13.2 0.1085 3.03
0.14 2.64 0.06 4.13
6.67
B
1.5 53.0 0.8 77.0 35.2 14.3 0.0801 1.30
0.06 2.09 0.03 3.03
2.87
3.5 59.0 0.8 88.0 49.9 14.5 0.0903 2.03
0.14 2.32 0.03 3.46
4.47
2.0 55.0 0.8 84.0 33.8 14 0.0773 1.34
0.08 2.17 0.03 3.31
2.95
1.5 53.0 0.8 82.0 30 12.2 0.0732 1.40
0.06 2.09 0.03 3.23
3.08
3.5 57.0 0.8 82.0 30 12.2 0.0732 1.39
0.14 2.24 0.03 3.23
3.06
Caption:
2.0 56.0 0.8 90.0 37.6 15.4 0.0816 1.76
0.08 2.20 0.03 3.54
3.88
3.5 58.0 0.8 77.0 35.2 14.3 0.0801 1.27
0.14 2.28 0.03 3.03
2.80
2.8 56.0 0.8 74.0 4.6 2.3 23.9 17.7 0.0725 0.74
0.11 2.20 0.03 2.91 0.18 0.09
1.64
2.8 56.0 0.8 74.0 23.9 17.7 0.0725 0.74
0.11 2.20 0.03 2.91
1.64
3.5 57.0 0.8 82.0 30 12.2 0.0732 1.33
0.14 2.24 0.03 3.23
2.92
2.3 55.0 0.8 82.0 30 12.2 0.0732 1.36
0.09 2.17 0.03 3.23
3.01
3.5 59.0 0.8 87.0 42.5 11.3 0.0805 1.95
0.14 2.32 0.03 3.43
4.29
3.5 60.0 0.8 84.0 33.8 14 0.0773 1.26
0.14 2.36 0.03 3.31
2.78
2.3 57.0 0.8 84.0 33.8 14 0.0773 1.27
0.09 2.24 0.03 3.31
2.79
6.4 67.0 0.8 88.0 49.9 14.5 0.0903 1.88
0.25 2.64 0.03 3.46
4.13
3.5 61.0 0.8 88.0 49.9 14.5 0.0903 1.94
0.14 2.40 0.03 3.46
4.27
0.8 56.0 0.8 93.0 42 15.7 0.0859 1.75
0.03 2.20 0.03 3.66
3.85
0.8 56.0 0.8 93.0 42 15.7 0.0859 1.84
0.03 2.20 0.03 3.66
4.05
4.8 65.0 0.8 100.0 58.6 17.1 0.0946 2.79
0.19 2.56 0.03 3.94
6.15
0.8 57.0 0.8 100.0 58.6 17.1 0.0946 2.89
0.03 2.24 0.03 3.94
6.37
3.5 69.0 0.5 105.0 36.8 13.2 0.1085 2.77
0.14 2.72 0.02 4.13
6.11
3.5 62.0 1.5 100.0 64.3 16.1 0.0938 3.60
0.14 2.44 0.06 3.94
7.94
3.5 69.0 1.5 105.0 36.8 13.2 0.1085 2.91
0.14 2.72 0.06 4.13
6.41
3.5 69.0 0.8 111.0 50.2 16.4 0.0751 3.77
0.14 2.72 0.03 4.37
8.31
3.5 72.0 1.5 115.0 47.7 14.1 0.0772 4.36
0.14 2.83 0.06 4.53
9.60
3.5 62.0 0.8 88.0 49.9 14.5 0.0903 1.88
0.14 2.44 0.03 3.46
4.14
3.5 64.0 1.5 100.0 64.3 16.1 0.0938 3.53
0.14 2.52 0.06 3.94
7.79
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B249
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
49.975 109.982 63.500 42.865 172000 0.88 0.76 1.14 25500 38600 44500 0.66
1.9675 4.3300 2.5000 1.6876 38600 5740 8690 10000
49.975 112.712 65.088 46.038 172000 0.88 0.76 1.14 25500 38600 44500 0.66
1.9675 4.4375 2.5625 1.8125 38600 5740 8690 10000
49.982 111.125 79.375 63.500 277000 0.30 2.28 3.39 41300 21000 71900 1.97
1.9678 4.3750 3.1250 2.5000 62400 9290 4720 16200
50.000 90.000 50.010 42.070 138000 0.32 2.11 3.14 20600 11300 35900 1.83
1.9685 3.5433 1.9689 1.6563 31100 4640 2540 8070
50.000 90.000 50.010 42.070 138000 0.32 2.11 3.14 20600 11300 35900 1.83
1.9685 3.5433 1.9689 1.6563 31100 4640 2540 8070
50.000 90.000 50.010 42.070 138000 0.32 2.11 3.14 20600 11300 35900 1.83
1.9685 3.5433 1.9689 1.6563 31100 4640 2540 8070
50.000 110.000 52.388 46.038 159000 0.40 1.68 2.50 23700 16300 41300 1.45
1.9685 4.3307 2.0625 1.8125 35800 5340 3670 9290
50.800 80.962 42.865 34.925 98000 0.36 1.90 2.83 14600 8880 25400 1.64
2.0000 3.1875 1.6876 1.3750 22000 3280 2000 5710
50.800 89.985 50.400 49.949 138000 0.32 2.11 3.14 20600 11300 35900 1.83
2.0000 3.5427 1.9843 1.9665 31100 4640 2540 8070
50.800 90.000 50.010 42.070 138000 0.32 2.11 3.14 20600 11300 35900 1.83
2.0000 3.5433 1.9689 1.6563 31100 4640 2540 8070
50.800 90.000 50.010 42.070 138000 0.32 2.11 3.14 20600 11300 35900 1.83
2.0000 3.5433 1.9689 1.6563 31100 4640 2540 8070
50.800 90.000 50.010 42.070 138000 0.32 2.11 3.14 20600 11300 35900 1.83
2.0000 3.5433 1.9689 1.6563 31100 4640 2540 8070
50.800 93.264 65.088 52.388 197000 0.34 1.99 2.97 29300 17000 51000 1.73
2.0000 3.6718 2.5625 2.0625 44300 6590 3820 11500
50.800 93.264 65.088 52.388 197000 0.34 1.99 2.97 29300 17000 51000 1.73
2.0000 3.6718 2.5625 2.0625 44300 6590 3820 11500
50.800 93.264 65.088 52.388 197000 0.34 1.99 2.97 29300 17000 51000 1.73
2.0000 3.6718 2.5625 2.0625 44300 6590 3820 11500
50.800 93.264 65.088 52.388 197000 0.34 1.99 2.97 29300 17000 51000 1.73
2.0000 3.6718 2.5625 2.0625 44300 6590 3820 11500
50.800 93.264 65.088 52.388 197000 0.34 1.99 2.97 29300 17000 51000 1.73
2.0000 3.6718 2.5625 2.0625 44300 6590 3820 11500
50.800 95.250 63.500 52.385 209000 0.33 2.05 3.05 31100 17600 54200 1.77
2.0000 3.7500 2.5000 2.0624 47000 7000 3950 12200
50.800 95.250 63.500 52.385 209000 0.33 2.05 3.05 31100 17600 54200 1.77
2.0000 3.7500 2.5000 2.0624 47000 7000 3950 12200
50.800 100.000 49.200 39.675 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.0000 3.9370 1.9370 1.5620 33000 4910 2980 8550
50.800 100.000 49.200 39.675 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.0000 3.9370 1.9370 1.5620 33000 4910 2980 8550
50.800 100.000 52.388 42.862 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.0000 3.9370 2.0625 1.6875 33000 4910 2980 8550
50.800 107.950 65.090 53.975 219000 0.34 2.01 3.00 32600 18700 56700 1.74
2.0000 4.2500 2.5626 2.1250 49200 7320 4200 12700
50.800 107.950 65.090 53.975 219000 0.34 2.01 3.00 32600 18700 56700 1.74
2.0000 4.2500 2.5626 2.1250 49200 7320 4200 12700
50.800 109.982 63.500 42.865 172000 0.88 0.76 1.14 25500 38600 44500 0.66
2.0000 4.3300 2.5000 1.6876 38600 5740 8690 10000
50.800 109.982 63.500 42.865 206000 0.88 0.76 1.14 30600 46300 53300 0.66
2.0000 4.3300 2.5000 1.6876 46200 6880 10400 12000
50.800 110.000 52.388 46.038 159000 0.40 1.68 2.50 23700 16300 41300 1.45
2.0000 4.3307 2.0625 1.8125 35800 5340 3670 9290
50.800 112.712 65.088 46.038 172000 0.88 0.76 1.14 25500 38600 44500 0.66
2.0000 4.4375 2.5625 1.8125 38600 5740 8690 10000
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B250 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
55197 55433D X1S-55197
55197 55444D X2S-55197
546 533D
365 363D X1S-366
366 363DC X1S-366
366 363D X3S-368
396 394D X2S-396
L305649 L305610D L305649XC
368A 362XD X5S-368A
368 363D X3S-368
368A 363DC X3S-368
368A 363D X2S-368A
3775 3729DC
3775 3729D X3S-3775
3780 3729DC X1S-3780
3780 3729D X1S-3780
3784 3729D X1S-3780
33889 33821DC X1S-33889
33889 33821D X1S-33889
385A 384EDC X2S-385A
385A 384ED X2S-385A
385A 384D X1S-385A
455 452D X2S-455
455-S 452D X1S-455
55200 55433D X4S-55200
55200C 55433D X4S-55200
398 394D X1S-398
55200 55444D X3S-55200
2.0 68.0 0.5 105.0 36.8 13.2 0.1085 2.69
0.08 2.68 0.02 4.13
5.93
B
2.0 68.0 1.5 105.0 36.8 13.2 0.1085 2.83
0.08 2.68 0.06 4.13
6.24
3.5 65.0 1.5 100.0 64.3 16.1 0.0938 3.50
0.14 2.56 0.06 3.94
7.71
2.0 58.0 0.8 84.0 33.8 14 0.0773 1.20
0.08 2.28 0.03 3.31
2.64
2.3 59.0 0.8 84.0 7.9 2.3 33.8 14 0.0773 1.24
0.09 2.32 0.03 3.31 0.31 0.09
2.73
2.3 59.0 0.8 84.0 33.8 14 0.0773 1.20
0.09 2.32 0.03 3.31
2.64
Caption:
0.8 61.0 0.8 104.5 56 21.4 0.0984 2.31
0.03 2.40 0.03 4.11
5.09
1.5 58.0 0.8 77.0 38.8 27.8 0.0841 0.78
0.06 2.28 0.03 3.03
1.73
3.5 62.0 0.5 86.5 33.8 12.7 0.0773 1.27
0.14 2.44 0.02 3.40
2.79
1.5 58.0 0.8 84.0 33.8 14 0.0773 1.18
0.06 2.28 0.03 3.31
2.60
3.5 62.0 0.8 84.0 7.9 2.3 33.8 12.7 0.0773 1.21
0.14 2.44 0.03 3.31 0.31 0.09
2.66
3.5 62.0 0.8 84.0 33.8 12.7 0.0773 1.17
0.14 2.44 0.03 3.31
2.57
0.8 58.0 0.8 88.0 9.4 2.3 49.9 14.5 0.0903 1.81
0.03 2.28 0.03 3.46 0.37 0.09
3.99
0.8 58.0 0.8 88.0 49.9 14.5 0.0903 1.84
0.03 2.28 0.03 3.46
4.06
3.5 64.0 0.8 88.0 9.4 2.3 49.9 14.5 0.0903 1.82
0.14 2.52 0.03 3.46 0.37 0.09
4.02
3.5 64.0 0.8 88.0 49.9 14.5 0.0903 1.82
0.14 2.52 0.03 3.46
4.02
6.4 70.0 0.8 88.0 49.9 14.5 0.0903 1.78
0.25 2.76 0.03 3.46
3.93
3.5 64.0 0.8 90.0 10.9 2.3 52.5 18.5 0.0910 1.85
0.14 2.52 0.03 3.54 0.43 0.09
4.08
3.5 64.0 0.8 90.0 52.5 18.5 0.0910 1.85
0.14 2.52 0.03 3.54
4.08
2.3 61.0 0.8 93.0 7.9 3.0 42 15.7 0.0859 1.62
0.09 2.40 0.03 3.66 0.31 0.12
3.58
2.3 61.0 0.8 93.0 42 15.7 0.0859 1.62
0.09 2.40 0.03 3.66
3.58
2.3 61.0 0.8 93.0 42 15.7 0.0859 1.76
0.09 2.40 0.03 3.66
3.89
0.8 60.0 0.8 100.0 58.6 17.1 0.0946 2.77
0.03 2.36 0.03 3.94
6.10
3.5 65.0 0.8 100.0 58.6 17.1 0.0946 2.75
0.14 2.56 0.03 3.94
6.07
3.5 71.0 0.5 105.0 36.8 13.2 0.1085 2.68
0.14 2.80 0.02 4.13
5.90
3.5 71.0 0.5 105.0 48.7 15.4 0.1198 2.85
0.14 2.80 0.02 4.13
6.29
0.8 62.0 0.8 104.5 56 21.4 0.0984 2.29
0.03 2.44 0.03 4.11
5.04
3.5 71.0 1.5 105.0 36.8 13.2 0.1085 2.79
0.14 2.80 0.06 4.13
6.15
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B251
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
50.800 117.475 73.025 53.975 240000 0.63 1.08 1.60 35800 38300 62300 0.93
2.0000 4.6250 2.8750 2.1250 54000 8040 8620 14000
50.800 123.825 77.785 55.562 291000 0.74 0.92 1.36 43400 54800 75600 0.79
2.0000 4.8750 3.0624 2.1875 65500 9760 12300 17000
50.800 123.825 79.375 63.500 307000 0.35 1.95 2.90 45800 27100 79700 1.69
2.0000 4.8750 3.1250 2.5000 69100 10300 6100 17900
51.592 90.000 50.010 42.070 138000 0.32 2.11 3.14 20600 11300 35900 1.83
2.0312 3.5433 1.9689 1.6563 31100 4640 2540 8070
52.388 93.264 65.088 52.388 197000 0.34 1.99 2.97 29300 17000 51000 1.73
2.0625 3.6718 2.5625 2.0625 44300 6590 3820 11500
52.388 95.250 63.500 52.385 209000 0.33 2.05 3.05 31100 17600 54200 1.77
2.0625 3.7500 2.5000 2.0624 47000 7000 3950 12200
52.388 95.250 63.500 52.385 209000 0.33 2.05 3.05 31100 17600 54200 1.77
2.0625 3.7500 2.5000 2.0624 47000 7000 3950 12200
52.388 107.950 65.090 53.975 219000 0.34 2.01 3.00 32600 18700 56700 1.74
2.0625 4.2500 2.5626 2.1250 49200 7320 4200 12700
52.388 109.982 63.500 42.865 172000 0.88 0.76 1.14 25500 38600 44500 0.66
2.0625 4.3300 2.5000 1.6876 38600 5740 8690 10000
52.388 111.125 79.375 63.500 277000 0.30 2.28 3.39 41300 21000 71900 1.97
2.0625 4.3750 3.1250 2.5000 62400 9290 4720 16200
52.388 112.712 65.088 46.038 172000 0.88 0.76 1.14 25500 38600 44500 0.66
2.0625 4.4375 2.5625 1.8125 38600 5740 8690 10000
53.975 95.250 63.500 52.385 209000 0.33 2.05 3.05 31100 17600 54200 1.77
2.1250 3.7500 2.5000 2.0624 47000 7000 3950 12200
53.975 100.000 49.200 39.675 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.1250 3.9370 1.9370 1.5620 33000 4910 2980 8550
53.975 100.000 52.388 42.862 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.1250 3.9370 2.0625 1.6875 33000 4910 2980 8550
53.975 107.950 65.090 53.975 219000 0.34 2.01 3.00 32600 18700 56700 1.74
2.1250 4.2500 2.5626 2.1250 49200 7320 4200 12700
53.975 107.950 65.090 53.975 219000 0.34 2.01 3.00 32600 18700 56700 1.74
2.1250 4.2500 2.5626 2.1250 49200 7320 4200 12700
53.975 111.125 79.375 63.500 277000 0.30 2.28 3.39 41300 21000 71900 1.97
2.1250 4.3750 3.1250 2.5000 62400 9290 4720 16200
53.975 117.475 73.025 53.975 240000 0.63 1.08 1.60 35800 38300 62300 0.93
2.1250 4.6250 2.8750 2.1250 54000 8040 8620 14000
53.975 123.825 79.375 63.500 307000 0.35 1.95 2.90 45800 27100 79700 1.69
2.1250 4.8750 3.1250 2.5000 69100 10300 6100 17900
53.975 136.525 95.250 76.200 376000 0.36 1.86 2.78 55900 34700 97400 1.61
2.1250 5.3750 3.7500 3.0000 84500 12600 7790 21900
53.975 139.700 77.790 51.803 322000 0.87 0.78 1.16 47900 71000 83400 0.67
2.1250 5.5000 3.0626 2.0395 72300 10800 16000 18800
54.987 107.950 65.090 53.975 219000 0.34 2.01 3.00 32600 18700 56700 1.74
2.1649 4.2500 2.5626 2.1250 49200 7320 4200 12700
55.000 100.000 49.200 39.675 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.1654 3.9370 1.9370 1.5620 33000 4910 2980 8550
55.000 100.000 49.200 39.675 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.1654 3.9370 1.9370 1.5620 33000 4910 2980 8550
55.000 100.000 49.200 39.675 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.1654 3.9370 1.9370 1.5620 33000 4910 2980 8550
55.000 100.000 52.388 42.862 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.1654 3.9370 2.0625 1.6875 33000 4910 2980 8550
55.000 100.000 52.388 42.862 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.1654 3.9370 2.0625 1.6875 33000 4910 2980 8550
55.000 120.000 65.090 53.975 231000 0.38 1.75 2.61 34400 22700 59900 1.52
2.1654 4.7244 2.5626 2.1250 52000 7740 5100 13500
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B252 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
66200 66462D X4S-55200
72200C 72488D
555 552D X1S-555
368-S 363D X1S-368-S
3767 3729D X1S-3767
33890 33821D X1S-33890
33891 33821D X1S-33890
468 452D X1S-468
55206 55433D X2S-55206
540 533D
55206 55444D X1S-55206
33895 33821D X2S-33895
389A 384ED X2S-389A
389A 384D X1S-389A
456 452DC
456 452D X1S-456
539 533D X2S-539
66212 66462D X1S-66212
557-S 552D X1S-557-S
636 632D
78215C 78549D X1S-78215
466 452D X1S-466
385 384EDC X4S-385
385 384ED X4S-385
385X 384ED X4S-385
385 384D X1S-385
385X 384D X1S-385
475 472DC X1S-475
3.5 71.0 0.8 111.0 50.2 16.4 0.0751 3.65
0.14 2.80 0.03 4.37
8.05
B
3.5 77.0 1.5 115.0 57.4 13.5 0.0825 4.34
0.14 3.03 0.06 4.53
9.56
2.3 66.0 1.5 115.0 91 21.1 0.1108 4.77
0.09 2.60 0.06 4.53
10.51
2.0 59.0 0.8 84.0 33.8 14 0.0773 1.15
0.08 2.32 0.03 3.31
2.54
2.3 63.0 0.8 88.0 49.9 14.5 0.0903 1.77
0.09 2.48 0.03 3.46
3.90
1.5 61.0 0.8 90.0 52.5 18.5 0.0910 1.82
0.06 2.40 0.03 3.54
4.00
Caption:
3.5 66.0 0.8 90.0 52.5 18.5 0.0910 1.80
0.14 2.60 0.03 3.54
3.97
1.5 62.0 0.8 100.0 58.6 17.1 0.0946 2.64
0.06 2.44 0.03 3.94
5.82
3.5 72.0 0.5 105.0 36.8 13.2 0.1085 2.60
0.14 2.83 0.02 4.13
5.73
3.5 67.0 1.5 100.0 64.3 16.1 0.0938 3.39
0.14 2.64 0.06 3.94
7.46
3.5 72.0 1.5 105.0 36.8 13.2 0.1085 2.71
0.14 2.83 0.06 4.13
5.98
1.5 63.0 0.8 90.0 52.5 18.5 0.0910 1.74
0.06 2.48 0.03 3.54
3.85
0.8 61.0 0.8 93.0 42 15.7 0.0859 1.55
0.03 2.40 0.03 3.66
3.41
0.8 61.0 0.8 93.0 42 15.7 0.0859 1.66
0.03 2.40 0.03 3.66
3.65
3.5 68.0 0.8 100.0 10.9 3.8 58.6 17.1 0.0946 2.57
0.14 2.68 0.03 3.94 0.43 0.15
5.66
3.5 68.0 0.8 100.0 58.6 17.1 0.0946 2.61
0.14 2.68 0.03 3.94
5.76
3.5 68.0 1.5 100.0 64.3 16.1 0.0938 3.35
0.14 2.68 0.06 3.94
7.37
3.5 73.0 0.8 111.0 50.2 16.4 0.0751 3.57
0.14 2.87 0.03 4.37
7.87
3.5 71.0 1.5 115.0 91 21.1 0.1108 4.64
0.14 2.80 0.06 4.53
10.22
3.5 73.0 1.5 125.0 106 21 0.0814 6.71
0.14 2.87 0.06 4.92
14.80
3.5 84.0 1.5 131.0 71.3 17.6 0.0926 5.84
0.14 3.31 0.06 5.16
12.87
2.3 66.0 0.8 100.0 58.6 17.1 0.0946 2.58
0.09 2.60 0.03 3.94
5.70
2.3 65.0 0.8 93.0 7.9 3.0 42 15.7 0.0859 1.50
0.09 2.56 0.03 3.66 0.31 0.12
3.32
2.3 65.0 0.8 93.0 42 15.7 0.0859 1.50
0.09 2.56 0.03 3.66
3.32
3.5 67.0 0.8 93.0 42 15.7 0.0859 1.49
0.14 2.64 0.03 3.66
3.30
2.3 65.0 0.8 93.0 42 15.7 0.0859 1.61
0.09 2.56 0.03 3.66
3.55
3.5 67.0 0.8 93.0 42 15.7 0.0859 1.60
0.14 2.64 0.03 3.66
3.53
0.8 67.0 0.8 114.0 14.2 3.0 77.2 23 0.1083 3.65
0.03 2.64 0.03 4.49 0.56 0.12
8.05
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B253
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
55.000 120.000 65.090 53.975 231000 0.38 1.75 2.61 34400 22700 59900 1.52
2.1654 4.7244 2.5626 2.1250 52000 7740 5100 13500
55.562 107.950 65.090 53.975 219000 0.34 2.01 3.00 32600 18700 56700 1.74
2.1875 4.2500 2.5626 2.1250 49200 7320 4200 12700
55.562 107.950 65.090 53.975 219000 0.34 2.01 3.00 32600 18700 56700 1.74
2.1875 4.2500 2.5626 2.1250 49200 7320 4200 12700
55.575 100.000 49.200 39.675 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.1880 3.9370 1.9370 1.5620 33000 4910 2980 8550
57.150 92.075 42.070 34.130 101000 0.39 1.74 2.59 15100 10000 26200 1.50
2.2500 3.6250 1.6563 1.3437 22700 3380 2250 5890
57.150 100.000 49.200 39.675 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.2500 3.9370 1.9370 1.5620 33000 4910 2980 8550
57.150 100.000 49.200 39.675 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.2500 3.9370 1.9370 1.5620 33000 4910 2980 8550
57.150 100.000 49.200 39.675 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.2500 3.9370 1.9370 1.5620 33000 4910 2980 8550
57.150 100.000 49.200 39.675 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.2500 3.9370 1.9370 1.5620 33000 4910 2980 8550
57.150 100.000 49.200 39.675 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.2500 3.9370 1.9370 1.5620 33000 4910 2980 8550
57.150 100.000 52.388 42.862 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.2500 3.9370 2.0625 1.6875 33000 4910 2980 8550
57.150 100.000 52.388 42.862 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.2500 3.9370 2.0625 1.6875 33000 4910 2980 8550
57.150 100.000 52.388 42.862 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.2500 3.9370 2.0625 1.6875 33000 4910 2980 8550
57.150 100.000 52.388 42.862 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.2500 3.9370 2.0625 1.6875 33000 4910 2980 8550
57.150 100.000 52.388 42.862 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.2500 3.9370 2.0625 1.6875 33000 4910 2980 8550
57.150 100.000 105.131 95.606 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.2500 3.9370 4.1390 3.7640 33000 4910 2980 8550
57.150 107.950 65.090 53.975 219000 0.34 2.01 3.00 32600 18700 56700 1.74
2.2500 4.2500 2.5626 2.1250 49200 7320 4200 12700
57.150 107.950 65.090 53.975 219000 0.34 2.01 3.00 32600 18700 56700 1.74
2.2500 4.2500 2.5626 2.1250 49200 7320 4200 12700
57.150 107.950 65.090 53.975 219000 0.34 2.01 3.00 32600 18700 56700 1.74
2.2500 4.2500 2.5626 2.1250 49200 7320 4200 12700
57.150 110.000 52.388 46.038 159000 0.40 1.68 2.50 23700 16300 41300 1.45
2.2500 4.3307 2.0625 1.8125 35800 5340 3670 9290
57.150 114.287 58.738 46.038 178000 0.49 1.38 2.06 26500 22100 46200 1.20
2.2500 4.4995 2.3125 1.8125 40000 5960 4980 10400
57.150 117.475 73.025 53.975 240000 0.63 1.08 1.60 35800 38300 62300 0.93
2.2500 4.6250 2.8750 2.1250 54000 8040 8620 14000
57.150 123.825 77.785 55.562 291000 0.74 0.92 1.36 43400 54800 75600 0.79
2.2500 4.8750 3.0624 2.1875 65500 9760 12300 17000
57.150 123.825 79.375 63.500 307000 0.35 1.95 2.90 45800 27100 79700 1.69
2.2500 4.8750 3.1250 2.5000 69100 10300 6100 17900
57.150 136.525 95.250 76.200 376000 0.36 1.86 2.78 55900 34700 97400 1.61
2.2500 5.3750 3.7500 3.0000 84500 12600 7790 21900
57.150 139.700 77.788 51.803 276000 0.87 0.78 1.16 41100 60900 71500 0.67
2.2500 5.5000 3.0625 2.0395 62000 9230 13700 16100
57.531 100.000 49.200 39.675 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.2650 3.9370 1.9370 1.5620 33000 4910 2980 8550
57.531 100.000 52.388 42.862 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.2650 3.9370 2.0625 1.6875 33000 4910 2980 8550
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B254 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
475 472D X1S-475
466-S 452DC
466-S 452D X1S-466-S
389 384ED X2S-389
L507949 L507914D L507949XS
387 384ED X2S-387
387A 384EDC X1S-387
387A 384ED X1S-387
387AS 384ED X1S-387
387-S 384ED X1S-387
387 384D X1S-387A
387A 384D X1S-387A
387AS 384D X1S-387A
387-S 384DC X1S-387A
387-S 384D X1S-387A
387A 384XD X4S-387A
462 452DC X2S-462
462 452D X2S-469
469 452D X2S-469
390 394D X2S-390
29665 29622D X1S-29665
66225 66462D X1S-66225
72225C 72488D X1S-72225
555-S 552D X1S-555-S
635 632D X1S-635
78225 78549D X2S-78225
388A 384ED X2S-388A
388A 384D X1S-388A
0.8 67.0 0.8 114.0 77.2 23 0.1083 3.65
0.03 2.64 0.03 4.49
8.05
B
2.3 66.0 0.8 100.0 10.9 3.8 58.6 17.1 0.0946 2.52
0.09 2.60 0.03 3.94 0.43 0.15
5.55
2.3 66.0 0.8 100.0 58.6 17.1 0.0946 2.56
0.09 2.60 0.03 3.94
5.65
2.3 65.0 0.8 93.0 42 15.7 0.0859 1.49
0.09 2.56 0.03 3.66
3.29
1.5 65.0 0.8 86.0 46.1 36.9 0.0914 1.08
0.06 2.56 0.03 3.39
2.38
2.3 66.0 0.8 93.0 42 15.7 0.0859 1.44
0.09 2.60 0.03 3.66
3.18
Caption:
3.5 69.0 0.8 93.0 7.9 3.0 42 15.7 0.0859 1.43
0.14 2.72 0.03 3.66 0.31 0.12
3.16
3.5 69.0 0.8 93.0 42 15.7 0.0859 1.43
0.14 2.72 0.03 3.66
3.16
5.0 72.0 0.8 93.0 42 15.7 0.0859 1.41
0.20 2.83 0.03 3.66
3.11
0.8 63.0 0.8 93.0 42 15.7 0.0859 1.45
0.03 2.48 0.03 3.66
3.20
2.3 66.0 0.8 93.0 42 15.7 0.0859 1.54
0.09 2.60 0.03 3.66
3.40
3.5 69.0 0.8 93.0 42 15.7 0.0859 1.53
0.14 2.72 0.03 3.66
3.38
5.0 72.0 0.8 93.0 42 15.7 0.0859 1.51
0.20 2.83 0.03 3.66
3.33
0.8 63.0 0.8 93.0 7.9 3.0 42 15.7 0.0859 1.55
0.03 2.48 0.03 3.66 0.31 0.12
3.42
0.8 63.0 0.8 93.0 42 15.7 0.0859 1.55
0.03 2.48 0.03 3.66
3.42
3.5 69.0 0.8 94.0 42 15.7 0.0859 2.90
0.14 2.72 0.03 3.70
6.40
2.3 67.0 0.8 100.0 10.9 3.8 58.6 17.1 0.0946 2.51
0.09 2.64 0.03 3.94 0.43 0.15
5.53
2.3 67.0 0.8 100.0 58.6 17.1 0.0946 2.51
0.09 2.64 0.03 3.94
5.53
3.5 70.0 0.8 100.0 58.6 17.1 0.0946 2.50
0.14 2.76 0.03 3.94
5.50
2.3 70.0 0.8 104.5 56 21.4 0.0984 2.12
0.09 2.76 0.03 4.11
4.68
3.5 75.0 0.8 109.0 77.7 43.3 0.1170 2.71
0.14 2.95 0.03 4.29
5.97
3.5 76.0 0.8 111.0 50.2 16.4 0.0751 3.34
0.14 2.99 0.03 4.37
7.37
3.5 81.0 1.5 115.0 57.4 13.5 0.0825 4.15
0.14 3.19 0.06 4.53
9.15
3.5 73.0 1.5 115.0 91 21.1 0.1108 4.47
0.14 2.87 0.06 4.53
9.86
3.5 75.0 1.5 125.0 106 21 0.0814 6.77
0.14 2.95 0.06 4.92
14.93
3.5 83.0 1.5 131.0 62.6 19.1 0.0884 5.41
0.14 3.27 0.06 5.16
11.92
3.5 69.0 0.8 93.0 42 15.7 0.0859 1.46
0.14 2.72 0.03 3.66
3.21
3.5 69.0 0.8 93.0 42 15.7 0.0859 1.51
0.14 2.72 0.03 3.66
3.34
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B255
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
59.972 129.982 69.850 47.625 249000 0.67 1.01 1.51 37100 42300 64600 0.88
2.3611 5.1174 2.7500 1.8750 56000 8340 9500 14500
59.977 100.000 55.560 44.450 171000 0.43 1.59 2.36 25500 18500 44300 1.37
2.3613 3.9370 2.1874 1.7500 38400 5720 4170 9960
59.987 123.825 79.375 63.500 307000 0.35 1.95 2.90 45800 27100 79700 1.69
2.3617 4.8750 3.1250 2.5000 69100 10300 6100 17900
60.000 110.000 52.388 46.038 159000 0.40 1.68 2.50 23700 16300 41300 1.45
2.3622 4.3307 2.0625 1.8125 35800 5340 3670 9290
60.000 110.000 52.388 46.038 159000 0.40 1.68 2.50 23700 16300 41300 1.45
2.3622 4.3307 2.0625 1.8125 35800 5340 3670 9290
60.000 120.000 65.090 53.975 231000 0.38 1.75 2.61 34400 22700 59900 1.52
2.3622 4.7244 2.5626 2.1250 52000 7740 5100 13500
60.000 129.982 69.850 47.625 249000 0.67 1.01 1.51 37100 42300 64600 0.88
2.3622 5.1174 2.7500 1.8750 56000 8340 9500 14500
60.325 100.000 55.560 44.450 171000 0.43 1.59 2.36 25500 18500 44300 1.37
2.3750 3.9370 2.1874 1.7500 38400 5720 4170 9960
60.325 100.000 55.560 44.450 171000 0.43 1.59 2.36 25500 18500 44300 1.37
2.3750 3.9370 2.1874 1.7500 38400 5720 4170 9960
60.325 123.825 79.375 63.500 307000 0.35 1.95 2.90 45800 27100 79700 1.69
2.3750 4.8750 3.1250 2.5000 69100 10300 6100 17900
60.325 123.825 79.375 63.500 307000 0.35 1.95 2.90 45800 27100 79700 1.69
2.3750 4.8750 3.1250 2.5000 69100 10300 6100 17900
60.325 123.825 79.375 63.500 307000 0.35 1.95 2.90 45800 27100 79700 1.69
2.3750 4.8750 3.1250 2.5000 69100 10300 6100 17900
60.325 136.525 95.250 76.200 376000 0.36 1.86 2.78 55900 34700 97400 1.61
2.3750 5.3750 3.7500 3.0000 84500 12600 7790 21900
61.912 110.000 52.388 46.038 159000 0.40 1.68 2.50 23700 16300 41300 1.45
2.4375 4.3307 2.0625 1.8125 35800 5340 3670 9290
61.912 123.825 79.375 63.500 307000 0.35 1.95 2.90 45800 27100 79700 1.69
2.4375 4.8750 3.1250 2.5000 69100 10300 6100 17900
61.976 100.000 53.975 44.450 171000 0.43 1.59 2.36 25500 18500 44300 1.37
2.4400 3.9370 2.1250 1.7500 38400 5720 4170 9960
62.738 100.000 55.560 44.450 171000 0.43 1.59 2.36 25500 18500 44300 1.37
2.4700 3.9370 2.1874 1.7500 38400 5720 4170 9960
62.738 100.000 55.560 44.450 171000 0.43 1.59 2.36 25500 18500 44300 1.37
2.4700 3.9370 2.1874 1.7500 38400 5720 4170 9960
63.500 94.458 42.860 34.925 108000 0.42 1.59 2.37 16100 11700 28000 1.38
2.5000 3.7188 1.6874 1.3750 24300 3620 2630 6300
63.500 110.000 52.388 46.038 159000 0.40 1.68 2.50 23700 16300 41300 1.45
2.5000 4.3307 2.0625 1.8125 35800 5340 3670 9290
63.500 110.000 52.388 46.038 159000 0.40 1.68 2.50 23700 16300 41300 1.45
2.5000 4.3307 2.0625 1.8125 35800 5340 3670 9290
63.500 110.000 52.388 46.038 159000 0.40 1.68 2.50 23700 16300 41300 1.45
2.5000 4.3307 2.0625 1.8125 35800 5340 3670 9290
63.500 110.000 52.388 46.038 159000 0.40 1.68 2.50 23700 16300 41300 1.45
2.5000 4.3307 2.0625 1.8125 35800 5340 3670 9290
63.500 112.712 55.562 42.862 178000 0.46 1.47 2.19 26400 20800 46000 1.27
2.5000 4.4375 2.1875 1.6875 39900 5950 4670 10400
63.500 117.475 66.675 53.975 223000 0.44 1.55 2.31 33200 24800 57800 1.34
2.5000 4.6250 2.6250 2.1250 50100 7470 5570 13000
63.500 120.000 65.090 53.975 231000 0.38 1.75 2.61 34400 22700 59900 1.52
2.5000 4.7244 2.5626 2.1250 52000 7740 5100 13500
63.500 120.000 65.090 53.975 231000 0.38 1.75 2.61 34400 22700 59900 1.52
2.5000 4.7244 2.5626 2.1250 52000 7740 5100 13500
63.500 120.000 65.090 53.975 231000 0.38 1.75 2.61 34400 22700 59900 1.52
2.5000 4.7244 2.5626 2.1250 52000 7740 5100 13500
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B256 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
66589 66522D X1S-66585
28980 28921D X2S-28980
558-S 552D X1S-558-S
397 394DC X1S-397
397 394D X1S-397
476 472D X1S-476
66585 66522D X1S-66585
28985 28921DC X2S-28985
28985 28921D X3S-28985
558 552DC X1S-558
558 552D X1S-558
558A 552D X1S-558
637 632D X1S-637
392 394D X1S-392
554 552D X2S-554
28990 28921D
28995 28921DC X1S-28995
28995 28921D X2S-28995
L610549 L610510D L610549XB
390A 394DC X1S-395
390A 394D X1S-395
395 394DC X1S-395
395 394D X3S-395
29586 29526D R800008
33251 33462D X2S-33251
477 472D X4S-477
483 472DC X3S-477
483 472D X3S-477
0.8 74.0 0.8 118.0 57 18.3 0.0797 3.94
0.03 2.91 0.03 4.65
8.68
B
3.5 73.0 0.8 96.0 60.1 24.5 0.1032 1.66
0.14 2.87 0.03 3.78
3.67
3.5 75.0 1.5 115.0 91 21.1 0.1108 4.31
0.14 2.95 0.06 4.53
9.50
0.8 69.0 0.8 104.5 9.4 2.3 56 21.4 0.0984 2.01
0.03 2.72 0.03 4.11 0.37 0.09
4.43
0.8 69.0 0.8 104.5 56 21.4 0.0984 2.01
0.03 2.72 0.03 4.11
4.43
2.0 73.0 0.8 114.0 77.2 23 0.1083 3.42
0.08 2.87 0.03 4.49
7.54
Caption:
3.5 79.0 0.8 118.0 57 18.3 0.0797 3.92
0.14 3.11 0.03 4.65
8.64
3.5 73.0 0.8 96.0 7.9 2.3 60.1 24.5 0.1032 1.65
0.14 2.87 0.03 3.78 0.31 0.09
3.64
3.5 73.0 0.8 96.0 60.1 24.5 0.1032 1.65
0.14 2.87 0.03 3.78
3.64
2.3 73.0 1.5 115.0 14.2 4.6 91 21.1 0.1108 4.31
0.09 2.87 0.06 4.53 0.56 0.18
9.49
2.3 73.0 1.5 115.0 91 21.1 0.1108 4.31
0.09 2.87 0.06 4.53
9.49
3.5 76.0 1.5 115.0 91 21.1 0.1108 4.29
0.14 2.99 0.06 4.53
9.47
3.5 78.0 1.5 125.0 106 21 0.0814 6.55
0.14 3.07 0.06 4.92
14.44
0.8 70.0 0.8 104.5 56 21.4 0.0984 1.97
0.03 2.76 0.03 4.11
4.35
3.5 77.0 1.5 115.0 91 21.1 0.1108 4.17
0.14 3.03 0.06 4.53
9.19
2.0 72.0 0.8 96.0 60.1 24.5 0.1032 1.58
0.08 2.83 0.03 3.78
3.49
3.5 75.0 0.8 96.0 7.9 2.3 60.1 24.5 0.1032 1.55
0.14 2.95 0.03 3.78 0.31 0.09
3.42
3.5 75.0 0.8 96.0 60.1 24.5 0.1032 1.55
0.14 2.95 0.03 3.78
3.42
1.5 71.0 0.8 91.0 56.7 43.6 0.1006 0.97
0.06 2.80 0.03 3.58
2.15
1.5 73.0 0.8 104.5 9.4 2.3 56 21.4 0.0984 1.90
0.06 2.87 0.03 4.11 0.37 0.09
4.18
1.5 73.0 0.8 104.5 56 21.4 0.0984 1.90
0.06 2.87 0.03 4.11
4.18
3.5 77.0 0.8 104.5 9.4 2.3 56 21.4 0.0984 1.88
0.14 3.03 0.03 4.11 0.37 0.09
4.14
3.5 77.0 0.8 104.5 56 21.4 0.0984 1.88
0.14 3.03 0.03 4.11
4.14
1.5 73.0 0.8 105.0 70.3 25.8 0.1112 2.19
0.06 2.87 0.03 4.13
4.83
0.8 73.0 0.8 112.0 84.2 25.9 0.1162 3.18
0.03 2.87 0.03 4.41
7.02
0.8 73.0 0.8 114.0 77.2 23 0.1083 3.28
0.03 2.87 0.03 4.49
7.23
3.5 78.0 0.8 114.0 14.2 3.0 77.2 23 0.1083 3.26
0.14 3.07 0.03 4.49 0.56 0.12
7.19
3.5 78.0 0.8 114.0 77.2 23 0.1083 3.26
0.14 3.07 0.03 4.49
7.19
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B257
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
63.500 123.825 79.375 63.500 307000 0.35 1.95 2.90 45800 27100 79700 1.69
2.5000 4.8750 3.1250 2.5000 69100 10300 6100 17900
63.500 123.825 79.375 63.500 307000 0.35 1.95 2.90 45800 27100 79700 1.69
2.5000 4.8750 3.1250 2.5000 69100 10300 6100 17900
63.500 127.000 80.962 65.088 317000 0.36 1.86 2.76 47100 29400 82100 1.61
2.5000 5.0000 3.1875 2.5625 71200 10600 6600 18500
63.500 136.525 95.250 76.200 376000 0.36 1.86 2.78 55900 34700 97400 1.61
2.5000 5.3750 3.7500 3.0000 84500 12600 7790 21900
63.500 139.700 77.788 51.803 276000 0.87 0.78 1.16 41100 60900 71500 0.67
2.5000 5.5000 3.0625 2.0395 62000 9230 13700 16100
63.500 155.575 101.600 85.725 512000 0.33 2.08 3.09 76300 42500 133000 1.80
2.5000 6.1250 4.0000 3.3750 115000 17100 9550 29900
64.960 152.400 95.250 76.200 398000 0.41 1.65 2.46 59300 41500 103000 1.43
2.5575 6.0000 3.7500 3.0000 89500 13300 9330 23200
64.960 155.575 101.600 85.725 512000 0.33 2.08 3.09 76300 42500 133000 1.80
2.5575 6.1250 4.0000 3.3750 115000 17100 9550 29900
64.963 127.000 80.962 65.088 317000 0.36 1.86 2.76 47100 29400 82100 1.61
2.5576 5.0000 3.1875 2.5625 71200 10600 6600 18500
64.987 139.700 77.788 51.803 276000 0.87 0.78 1.16 41100 60900 71500 0.67
2.5586 5.5000 3.0625 2.0395 62000 9230 13700 16100
65.000 120.000 65.090 53.975 231000 0.38 1.75 2.61 34400 22700 59900 1.52
2.5591 4.7244 2.5626 2.1250 52000 7740 5100 13500
66.675 110.000 52.388 46.038 159000 0.40 1.68 2.50 23700 16300 41300 1.45
2.6250 4.3307 2.0625 1.8125 35800 5340 3670 9290
66.675 110.000 52.388 46.038 159000 0.40 1.68 2.50 23700 16300 41300 1.45
2.6250 4.3307 2.0625 1.8125 35800 5340 3670 9290
66.675 110.000 52.388 46.038 159000 0.40 1.68 2.50 23700 16300 41300 1.45
2.6250 4.3307 2.0625 1.8125 35800 5340 3670 9290
66.675 117.475 66.675 53.975 223000 0.44 1.55 2.31 33200 24800 57800 1.34
2.6250 4.6250 2.6250 2.1250 50100 7470 5570 13000
66.675 120.000 65.090 53.975 231000 0.38 1.75 2.61 34400 22700 59900 1.52
2.6250 4.7244 2.5626 2.1250 52000 7740 5100 13500
66.675 123.825 79.375 63.500 307000 0.35 1.95 2.90 45800 27100 79700 1.69
2.6250 4.8750 3.1250 2.5000 69100 10300 6100 17900
66.675 123.825 79.375 63.500 307000 0.35 1.95 2.90 45800 27100 79700 1.69
2.6250 4.8750 3.1250 2.5000 69100 10300 6100 17900
66.675 136.525 95.250 76.200 376000 0.36 1.86 2.78 55900 34700 97400 1.61
2.6250 5.3750 3.7500 3.0000 84500 12600 7790 21900
68.262 110.000 52.388 46.038 159000 0.40 1.68 2.50 23700 16300 41300 1.45
2.6875 4.3307 2.0625 1.8125 35800 5340 3670 9290
68.262 110.000 52.388 46.038 159000 0.40 1.68 2.50 23700 16300 41300 1.45
2.6875 4.3307 2.0625 1.8125 35800 5340 3670 9290
68.262 110.000 52.388 46.038 159000 0.40 1.68 2.50 23700 16300 41300 1.45
2.6875 4.3307 2.0625 1.8125 35800 5340 3670 9290
68.262 120.000 65.090 53.975 231000 0.38 1.75 2.61 34400 22700 59900 1.52
2.6875 4.7244 2.5626 2.1250 52000 7740 5100 13500
68.262 123.825 79.375 63.500 307000 0.35 1.95 2.90 45800 27100 79700 1.69
2.6875 4.8750 3.1250 2.5000 69100 10300 6100 17900
68.262 123.825 79.375 63.500 307000 0.35 1.95 2.90 45800 27100 79700 1.69
2.6875 4.8750 3.1250 2.5000 69100 10300 6100 17900
68.262 127.000 80.962 65.088 317000 0.36 1.86 2.76 47100 29400 82100 1.61
2.6875 5.0000 3.1875 2.5625 71200 10600 6600 18500
68.262 136.525 95.250 76.200 376000 0.36 1.86 2.78 55900 34700 97400 1.61
2.6875 5.3750 3.7500 3.0000 84500 12600 7790 21900
68.262 161.925 105.562 70.637 480000 0.71 0.95 1.42 71400 86700 124000 0.82
2.6875 6.3750 4.1560 2.7810 108000 16100 19500 28000
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B258 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
559 552DC X2S-559
559 552D X2S-559
565 563D X1S-565
639 632D X2S-639
78250 78549D X1S-78250
745-S 742D X2S-745-S
656 654DC X1S-656
747-S 742D X1S-747-S
569 563D X1S-569
78255X 78549D X1S-78255X
478 472D X2S-478
395A 394D X1S-395-S
395-S 394DC X1S-395-S
395-S 394D X3S-395-S
33262 33462D X1S-33262
479 472D X1S-479
560 552DC X2S-560
560 552D X3S-560
641 632D X1S-641
399A 394D X4S-399A
399AS 394DC X1S-399A
399AS 394D X4S-399A
480 472D X2S-480
560-S 552DC X1S-560-S
560-S 552D X1S-560-S
570 563D X1S-570
642 632D X1S-642
9278 9220D X1S-9278
3.5 78.0 1.5 115.0 14.2 4.6 91 21.1 0.1108 4.25
0.14 3.07 0.06 4.53 0.56 0.18
9.38
B
3.5 78.0 1.5 115.0 91 21.1 0.1108 4.25
0.14 3.07 0.06 4.53
9.38
3.5 80.0 1.5 119.0 101 24 0.1167 4.53
0.14 3.15 0.06 4.69
9.99
3.5 81.0 1.5 125.0 106 21 0.0814 6.31
0.14 3.19 0.06 4.92
13.92
2.3 85.0 1.5 131.0 62.6 19.1 0.0884 5.10
0.09 3.35 0.06 5.16
11.24
3.5 84.0 1.5 143.0 160 26.3 0.0898 9.86
0.14 3.31 0.06 5.63
21.74
Caption:
3.5 85.0 1.5 141.0 17.3 5.3 137 27.3 0.0919 8.33
0.14 3.35 0.06 5.55 0.68 0.21
18.36
3.5 85.0 1.5 143.0 160 26.3 0.0898 9.72
0.14 3.35 0.06 5.63
21.43
3.5 81.0 1.5 119.0 101 24 0.1167 4.44
0.14 3.19 0.06 4.69
9.79
3.5 89.0 1.5 131.0 62.6 19.1 0.0884 4.99
0.14 3.50 0.06 5.16
11.00
2.3 77.0 0.8 114.0 77.2 23 0.1083 3.18
0.09 3.03 0.03 4.49
7.02
0.8 73.0 0.8 104.5 56 21.4 0.0984 1.76
0.03 2.87 0.03 4.11
3.89
3.5 79.0 0.8 104.5 9.4 2.3 56 21.4 0.0984 1.76
0.14 3.11 0.03 4.11 0.37 0.09
3.87
3.5 79.0 0.8 104.5 56 21.4 0.0984 1.76
0.14 3.11 0.03 4.11
3.87
3.5 81.0 0.8 112.0 84.2 25.9 0.1162 2.96
0.14 3.19 0.03 4.41
6.52
2.3 78.0 0.8 114.0 77.2 23 0.1083 3.10
0.09 3.07 0.03 4.49
6.83
3.5 81.0 1.5 115.0 14.2 4.6 91 21.1 0.1108 3.90
0.14 3.19 0.06 4.53 0.56 0.18
8.61
3.5 81.0 1.5 115.0 91 21.1 0.1108 3.90
0.14 3.19 0.06 4.53
8.61
3.5 83.0 1.5 125.0 106 21 0.0814 6.08
0.14 3.27 0.06 4.92
13.40
2.3 78.0 0.8 104.5 56 21.4 0.0984 1.69
0.09 3.07 0.03 4.11
3.72
5.0 83.0 0.8 104.5 9.4 2.3 56 21.4 0.0984 1.65
0.20 3.27 0.03 4.11 0.37 0.09
3.64
5.0 83.0 0.8 104.5 56 21.4 0.0984 1.65
0.20 3.27 0.03 4.11
3.64
3.5 82.0 0.8 114.0 77.2 23 0.1083 3.00
0.14 3.23 0.03 4.49
6.62
3.5 83.0 1.5 115.0 14.2 4.6 91 21.1 0.1108 3.79
0.14 3.27 0.06 4.53 0.56 0.18
8.35
3.5 83.0 1.5 115.0 91 21.1 0.1108 3.79
0.14 3.27 0.06 4.53
8.35
3.5 83.0 1.5 119.0 101 24 0.1167 4.23
0.14 3.27 0.06 4.69
9.31
3.5 85.0 1.5 125.0 106 21 0.0814 5.93
0.14 3.35 0.06 4.92
13.08
3.5 97.0 0.8 153.0 102 18.4 0.0984 9.41
0.14 3.82 0.03 6.03
20.76
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B259
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
69.850 114.287 58.738 46.038 178000 0.49 1.38 2.06 26500 22100 46200 1.20
2.7500 4.4995 2.3125 1.8125 40000 5960 4980 10400
69.850 114.287 58.738 46.038 178000 0.49 1.38 2.06 26500 22100 46200 1.20
2.7500 4.4995 2.3125 1.8125 40000 5960 4980 10400
69.850 117.475 66.675 53.975 223000 0.44 1.55 2.31 33200 24800 57800 1.34
2.7500 4.6250 2.6250 2.1250 50100 7470 5570 13000
69.850 117.475 66.675 53.975 223000 0.44 1.55 2.31 33200 24800 57800 1.34
2.7500 4.6250 2.6250 2.1250 50100 7470 5570 13000
69.850 120.000 65.090 53.975 231000 0.38 1.75 2.61 34400 22700 59900 1.52
2.7500 4.7244 2.5626 2.1250 52000 7740 5100 13500
69.850 120.000 71.438 58.738 288000 0.36 1.87 2.79 42900 26500 74700 1.62
2.7500 4.7244 2.8125 2.3125 64800 9650 5950 16800
69.850 127.000 80.962 65.088 317000 0.36 1.86 2.76 47100 29400 82100 1.61
2.7500 5.0000 3.1875 2.5625 71200 10600 6600 18500
69.850 136.525 95.250 76.200 376000 0.36 1.86 2.78 55900 34700 97400 1.61
2.7500 5.3750 3.7500 3.0000 84500 12600 7790 21900
69.850 152.400 95.250 76.200 398000 0.41 1.65 2.46 59300 41500 103000 1.43
2.7500 6.0000 3.7500 3.0000 89500 13300 9330 23200
69.850 155.575 101.600 85.725 512000 0.33 2.08 3.09 76300 42500 133000 1.80
2.7500 6.1250 4.0000 3.3750 115000 17100 9550 29900
69.850 155.575 101.600 85.725 512000 0.33 2.08 3.09 76300 42500 133000 1.80
2.7500 6.1250 4.0000 3.3750 115000 17100 9550 29900
69.850 171.450 125.412 100.012 659000 0.30 2.26 3.36 98200 50300 171000 1.95
2.7500 6.7500 4.9375 3.9375 148000 22100 11300 38400
69.914 177.800 109.538 74.612 494000 0.76 0.88 1.31 73500 96200 128000 0.76
2.7525 7.0000 4.3125 2.9375 111000 16500 21600 28800
69.952 121.442 52.390 38.100 165000 0.45 1.50 2.23 24500 18900 42700 1.30
2.7540 4.7812 2.0626 1.5000 37000 5510 4260 9600
70.000 120.000 65.090 53.975 231000 0.38 1.75 2.61 34400 22700 59900 1.52
2.7559 4.7244 2.5626 2.1250 52000 7740 5100 13500
70.000 120.000 65.090 53.975 231000 0.38 1.75 2.61 34400 22700 59900 1.52
2.7559 4.7244 2.5626 2.1250 52000 7740 5100 13500
70.637 114.287 58.738 46.038 178000 0.49 1.38 2.06 26500 22100 46200 1.20
2.7810 4.4995 2.3125 1.8125 40000 5960 4980 10400
70.637 114.287 58.738 46.038 178000 0.49 1.38 2.06 26500 22100 46200 1.20
2.7810 4.4995 2.3125 1.8125 40000 5960 4980 10400
71.438 117.475 66.675 53.975 223000 0.44 1.55 2.31 33200 24800 57800 1.34
2.8125 4.6250 2.6250 2.1250 50100 7470 5570 13000
71.438 120.000 71.438 58.738 288000 0.36 1.87 2.79 42900 26500 74700 1.62
2.8125 4.7244 2.8125 2.3125 64800 9650 5950 16800
71.438 127.000 80.962 65.088 317000 0.36 1.86 2.76 47100 29400 82100 1.61
2.8125 5.0000 3.1875 2.5625 71200 10600 6600 18500
71.438 127.000 80.962 65.088 317000 0.36 1.86 2.76 47100 29400 82100 1.61
2.8125 5.0000 3.1875 2.5625 71200 10600 6600 18500
71.438 136.525 69.850 53.975 249000 0.44 1.52 2.26 37100 28200 64600 1.31
2.8125 5.3750 2.7500 2.1250 56000 8330 6340 14500
71.438 136.525 95.250 76.200 376000 0.36 1.86 2.78 55900 34700 97400 1.61
2.8125 5.3750 3.7500 3.0000 84500 12600 7790 21900
71.438 136.525 95.250 76.200 376000 0.36 1.86 2.78 55900 34700 97400 1.61
2.8125 5.3750 3.7500 3.0000 84500 12600 7790 21900
73.025 114.287 58.738 46.038 178000 0.49 1.38 2.06 26500 22100 46200 1.20
2.8750 4.4995 2.3125 1.8125 40000 5960 4980 10400
73.025 114.287 58.738 46.038 178000 0.49 1.38 2.06 26500 22100 46200 1.20
2.8750 4.4995 2.3125 1.8125 40000 5960 4980 10400
73.025 117.475 66.675 53.975 223000 0.44 1.55 2.31 33200 24800 57800 1.34
2.8750 4.6250 2.6250 2.1250 50100 7470 5570 13000
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B260 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
29675 29622DC X1S-29675
29675 29622D X2S-29675
33275 33462DC X3S-33275
33275 33462D X4S-33275
482 472D X3S-482
47487 47420D X1S-47487
566 563D X3S-566
643 632D X2S-643
655 654D X1S-655
744A 742D X1S-744A
745A 742D X1S-745A
835 834D X1S-835
9382 9320D X1S-9382
34274 34478D X1S-34274
484 472DC X2S-484
484 472D X2S-484
29680 29622DC X1S-29680
29680 29622D X1S-29680
33281 33462D X1S-33281
47490 47420D X1S-47490
567A 563D X1S-567A
567-S 563D X1S-567A
495-S 493D X1S-495-S
644 632D X1S-645
645 632D X1S-645
29685 29622DC X1S-29685
29685 29622D X2S-29685
33287 33462DC X3S-33287
1.5 80.0 0.8 109.0 7.9 2.3 77.7 43.3 0.1170 2.25
0.06 3.15 0.03 4.29 0.31 0.09
4.96
B
1.5 80.0 0.8 109.0 77.7 43.3 0.1170 2.25
0.06 3.15 0.03 4.29
4.96
3.5 84.0 0.8 112.0 10.9 3.8 84.2 25.9 0.1162 2.80
0.14 3.31 0.03 4.41 0.43 0.15
6.16
3.5 84.0 0.8 112.0 84.2 25.9 0.1162 2.80
0.14 3.31 0.03 4.41
6.16
3.5 83.0 0.8 114.0 77.2 23 0.1083 2.92
0.14 3.27 0.03 4.49
6.44
3.5 84.0 0.8 114.0 98.4 26.3 0.1153 3.12
0.14 3.31 0.03 4.49
6.87
Caption:
3.5 85.0 1.5 119.0 101 24 0.1167 4.16
0.14 3.35 0.06 4.69
9.16
3.5 86.0 1.5 125.0 106 21 0.0814 5.82
0.14 3.39 0.06 4.92
12.84
3.5 88.0 1.5 141.0 137 27.3 0.0919 8.08
0.14 3.46 0.06 5.55
17.81
5.0 91.0 1.5 143.0 160 26.3 0.0898 9.31
0.20 3.58 0.06 5.63
20.53
3.5 88.0 1.5 143.0 160 26.3 0.0898 9.15
0.14 3.46 0.06 5.63
20.17
3.5 91.0 0.8 155.0 198 34.8 0.0937 14.37
0.14 3.58 0.03 6.10
31.68
3.5 101.0 2.3 164.0 118 18.6 0.1053 12.79
0.14 3.98 0.09 6.46
28.19
2.0 81.0 0.8 116.0 69.3 27 0.1093 2.26
0.08 3.19 0.03 4.57
4.99
2.0 80.0 0.8 114.0 14.2 3.0 77.2 23 0.1083 2.92
0.08 3.15 0.03 4.49 0.56 0.12
6.44
2.0 80.0 0.8 114.0 77.2 23 0.1083 2.92
0.08 3.15 0.03 4.49
6.44
1.3 80.0 0.8 109.0 7.9 2.3 77.7 43.3 0.1170 2.20
0.05 3.15 0.03 4.29 0.31 0.09
4.84
1.3 80.0 0.8 109.0 77.7 43.3 0.1170 2.20
0.05 3.15 0.03 4.29
4.84
3.5 85.0 0.8 112.0 84.2 24.4 0.1162 2.72
0.14 3.35 0.03 4.41
5.99
3.5 86.0 0.8 114.0 98.4 26.3 0.1153 3.02
0.14 3.39 0.03 4.49
6.65
3.5 86.0 1.5 119.0 101 24 0.1167 4.02
0.14 3.39 0.06 4.69
8.86
6.4 92.0 1.5 119.0 101 24 0.1167 3.97
0.25 3.62 0.06 4.69
8.75
3.5 88.0 0.8 130.0 105 29.3 0.1252 4.40
0.14 3.46 0.03 5.12
9.70
3.5 87.0 1.5 125.0 106 21 0.0814 5.72
0.14 3.43 0.06 4.92
12.60
6.4 93.0 1.5 125.0 106 21 0.0814 5.65
0.25 3.66 0.06 4.92
12.45
3.5 86.0 0.8 109.0 7.9 2.3 77.7 43.3 0.1170 2.09
0.14 3.39 0.03 4.29 0.31 0.09
4.60
3.5 86.0 0.8 109.0 77.7 43.3 0.1170 2.09
0.14 3.39 0.03 4.29
4.60
3.5 87.0 0.8 112.0 10.9 3.8 84.2 24.4 0.1162 2.62
0.14 3.43 0.03 4.41 0.43 0.15
5.78
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B261
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
73.025 117.475 66.675 53.975 223000 0.44 1.55 2.31 33200 24800 57800 1.34
2.8750 4.6250 2.6250 2.1250 50100 7470 5570 13000
73.025 120.000 79.908 67.285 223000 0.44 1.55 2.31 33200 24800 57800 1.34
2.8750 4.7244 3.1460 2.6490 50100 7470 5570 13000
73.025 127.000 80.962 65.088 317000 0.36 1.86 2.76 47100 29400 82100 1.61
2.8750 5.0000 3.1875 2.5625 71200 10600 6600 18500
73.025 127.000 80.962 65.088 317000 0.36 1.86 2.76 47100 29400 82100 1.61
2.8750 5.0000 3.1875 2.5625 71200 10600 6600 18500
73.025 139.992 82.550 66.675 333000 0.40 1.67 2.49 49600 34300 86400 1.45
2.8750 5.5115 3.2500 2.6250 75000 11200 7720 19400
73.025 152.400 95.250 76.200 398000 0.41 1.65 2.46 59300 41500 103000 1.43
2.8750 6.0000 3.7500 3.0000 89500 13300 9330 23200
73.025 155.575 101.600 85.725 512000 0.33 2.08 3.09 76300 42500 133000 1.80
2.8750 6.1250 4.0000 3.3750 115000 17100 9550 29900
73.817 114.287 58.738 46.038 178000 0.49 1.38 2.06 26500 22100 46200 1.20
2.9062 4.4995 2.3125 1.8125 40000 5960 4980 10400
73.817 127.000 80.962 65.088 317000 0.36 1.86 2.76 47100 29400 82100 1.61
2.9062 5.0000 3.1875 2.5625 71200 10600 6600 18500
74.612 139.992 82.550 66.675 333000 0.40 1.67 2.49 49600 34300 86400 1.45
2.9375 5.5115 3.2500 2.6250 75000 11200 7720 19400
74.976 121.442 52.390 38.100 165000 0.45 1.50 2.23 24500 18900 42700 1.30
2.9518 4.7812 2.0626 1.5000 37000 5510 4260 9600
76.200 109.538 42.860 34.925 112000 0.50 1.34 2.00 16600 14300 28900 1.16
3.0000 4.3125 1.6874 1.3750 25100 3730 3210 6500
76.200 121.442 52.390 38.100 165000 0.45 1.50 2.23 24500 18900 42700 1.30
3.0000 4.7812 2.0626 1.5000 37000 5510 4260 9600
76.200 121.442 52.390 38.100 165000 0.45 1.50 2.23 24500 18900 42700 1.30
3.0000 4.7812 2.0626 1.5000 37000 5510 4260 9600
76.200 136.525 69.850 53.975 249000 0.44 1.52 2.26 37100 28200 64600 1.31
3.0000 5.3750 2.7500 2.1250 56000 8330 6340 14500
76.200 136.525 69.850 53.975 249000 0.44 1.52 2.26 37100 28200 64600 1.31
3.0000 5.3750 2.7500 2.1250 56000 8330 6340 14500
76.200 139.992 82.550 66.675 333000 0.40 1.67 2.49 49600 34300 86400 1.45
3.0000 5.5115 3.2500 2.6250 75000 11200 7720 19400
76.200 139.992 82.550 66.675 333000 0.40 1.67 2.49 49600 34300 86400 1.45
3.0000 5.5115 3.2500 2.6250 75000 11200 7720 19400
76.200 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.0000 6.0000 3.2500 2.5000 78300 11700 8820 20300
76.200 152.400 95.250 76.200 398000 0.41 1.65 2.46 59300 41500 103000 1.43
3.0000 6.0000 3.7500 3.0000 89500 13300 9330 23200
76.200 152.400 95.250 76.200 398000 0.41 1.65 2.46 59300 41500 103000 1.43
3.0000 6.0000 3.7500 3.0000 89500 13300 9330 23200
76.200 155.575 101.600 85.725 512000 0.33 2.08 3.09 76300 42500 133000 1.80
3.0000 6.1250 4.0000 3.3750 115000 17100 9550 29900
76.200 155.575 101.600 85.725 512000 0.33 2.08 3.09 76300 42500 133000 1.80
3.0000 6.1250 4.0000 3.3750 115000 17100 9550 29900
76.200 161.925 104.775 85.725 528000 0.34 1.98 2.95 78500 45900 137000 1.71
3.0000 6.3750 4.1250 3.3750 119000 17700 10300 30700
76.200 161.925 105.562 70.637 480000 0.71 0.95 1.42 71400 86700 124000 0.82
3.0000 6.3750 4.1560 2.7810 108000 16100 19500 28000
76.200 171.450 125.412 100.012 659000 0.30 2.26 3.36 98200 50300 171000 1.95
3.0000 6.7500 4.9375 3.9375 148000 22100 11300 38400
76.200 171.450 125.412 100.012 659000 0.30 2.26 3.36 98200 50300 171000 1.95
3.0000 6.7500 4.9375 3.9375 148000 22100 11300 38400
76.200 177.800 109.538 74.612 494000 0.76 0.88 1.31 73500 96200 128000 0.76
3.0000 7.0000 4.3125 2.9375 111000 16500 21600 28800
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B262 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
33287 33462D X3S-33287
33287 33472DC X1S-33287
567 563D X5S-567
567X 563D X2S-567
576 572D X1S-576
657 654D X1S-657
744 742D X2S-744
29688 29622D X1S-29688
568 563D X2S-568
577 572D X1S-577
34294 34478D X1S-34294
L814749 L814710D L814749XA
34300 34478D X5S-34300
34301 34478D X2S-34301
495A 493DC X1S-495A
495A 493D X2S-495A
575 572DC X1S-575
575 572D X2S-575
590A 592D X1S-590A
659 654DC X1S-659
659 654D X1S-659
748-S 742DC X2S-748-S
748-S 742D X3S-748-S
755 752D X2S-755
9285 9220D X4S-9285
837 834D X1S-843
843 834D X1S-843
9380 9320D X1S-9380
3.5 87.0 0.8 112.0 84.2 24.4 0.1162 2.62
0.14 3.43 0.03 4.41
5.78
B
3.5 87.0 0.8 113.0 10.9 3.8 84.2 24.4 0.1162 3.32
0.14 3.43 0.03 4.45 0.43 0.15
7.32
3.5 88.0 1.5 119.0 101 24 0.1167 3.92
0.14 3.46 0.06 4.69
8.64
4.8 90.0 1.5 119.0 101 24 0.1167 3.93
0.19 3.54 0.06 4.69
8.66
3.5 90.0 0.8 133.0 126 32 0.1295 5.47
0.14 3.54 0.03 5.24
12.05
3.5 91.0 1.5 141.0 137 27.3 0.0919 7.81
0.14 3.58 0.06 5.55
17.21
Caption:
3.5 91.0 1.5 143.0 160 26.3 0.0898 9.05
0.14 3.58 0.06 5.63
19.95
1.5 83.0 0.8 109.0 77.7 43.3 0.1170 2.05
0.06 3.27 0.03 4.29
4.51
0.8 83.0 1.5 119.0 101 24 0.1167 3.89
0.03 3.27 0.06 4.69
8.57
3.5 91.0 0.8 133.0 126 32 0.1295 5.40
0.14 3.58 0.03 5.24
11.91
2.0 85.0 0.8 116.0 69.3 27 0.1093 2.03
0.08 3.35 0.03 4.57
4.47
1.5 84.0 0.8 105.0 76 59.6 0.1164 1.26
0.06 3.31 0.03 4.13
2.78
2.0 86.0 0.8 116.0 69.3 27 0.1093 1.98
0.08 3.39 0.03 4.57
4.37
3.5 89.0 0.8 116.0 69.3 27 0.1093 1.96
0.14 3.50 0.03 4.57
4.32
3.5 92.0 0.8 130.0 12.4 4.6 105 29.3 0.1252 4.07
0.14 3.62 0.03 5.12 0.49 0.18
8.98
3.5 92.0 0.8 130.0 105 29.3 0.1252 4.07
0.14 3.62 0.03 5.12
8.98
3.5 92.0 0.8 133.0 15.7 4.6 126 32 0.1295 5.27
0.14 3.62 0.03 5.24 0.62 0.18
11.61
3.5 92.0 0.8 133.0 126 32 0.1295 5.27
0.14 3.62 0.03 5.24
11.61
3.5 95.0 0.8 144.0 151 38.3 0.1416 6.81
0.14 3.74 0.03 5.67
15.01
3.5 93.0 1.5 141.0 17.3 5.3 137 27.3 0.0919 7.53
0.14 3.66 0.06 5.55 0.68 0.21
16.61
3.5 93.0 1.5 141.0 137 27.3 0.0919 7.53
0.14 3.66 0.06 5.55
16.61
3.5 93.0 1.5 143.0 19.0 6.4 160 26.3 0.0898 8.75
0.14 3.66 0.06 5.63 0.75 0.25
19.30
3.5 93.0 1.5 143.0 160 26.3 0.0898 8.75
0.14 3.66 0.06 5.63
19.30
3.5 95.0 1.5 150.0 177 29.4 0.0945 10.10
0.14 3.74 0.06 5.91
22.26
3.5 103.0 0.8 153.0 102 18.4 0.0984 8.66
0.14 4.06 0.03 6.03
19.09
0.8 90.0 0.8 155.0 198 34.8 0.0937 13.52
0.03 3.54 0.03 6.10
29.80
6.4 101.0 0.8 155.0 198 34.8 0.0937 13.48
0.25 3.98 0.03 6.10
29.72
3.5 105.0 2.3 164.0 118 18.6 0.1053 12.15
0.14 4.13 0.09 6.46
26.80
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B263
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
76.200 177.800 115.888 74.612 494000 0.76 0.88 1.31 73500 96200 128000 0.76
3.0000 7.0000 4.5625 2.9375 111000 16500 21600 28800
76.200 190.500 127.000 104.775 860000 0.33 2.02 3.00 128000 73400 223000 1.74
3.0000 7.5000 5.0000 4.1250 193000 28800 16500 50100
77.788 121.442 52.390 38.100 165000 0.45 1.50 2.23 24500 18900 42700 1.30
3.0625 4.7812 2.0626 1.5000 37000 5510 4260 9600
77.788 136.525 69.850 53.975 249000 0.44 1.52 2.26 37100 28200 64600 1.31
3.0625 5.3750 2.7500 2.1250 56000 8330 6340 14500
77.788 136.525 69.850 53.975 249000 0.44 1.52 2.26 37100 28200 64600 1.31
3.0625 5.3750 2.7500 2.1250 56000 8330 6340 14500
79.375 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.1250 6.0000 3.2500 2.5000 78300 11700 8820 20300
79.375 152.400 95.250 76.200 398000 0.41 1.65 2.46 59300 41500 103000 1.43
3.1250 6.0000 3.7500 3.0000 89500 13300 9330 23200
79.375 152.400 95.250 76.200 398000 0.41 1.65 2.46 59300 41500 103000 1.43
3.1250 6.0000 3.7500 3.0000 89500 13300 9330 23200
79.375 155.575 101.600 85.725 512000 0.33 2.08 3.09 76300 42500 133000 1.80
3.1250 6.1250 4.0000 3.3750 115000 17100 9550 29900
79.985 139.992 82.550 66.675 333000 0.40 1.67 2.49 49600 34300 86400 1.45
3.1490 5.5115 3.2500 2.6250 75000 11200 7720 19400
79.985 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.1490 6.0000 3.2500 2.5000 78300 11700 8820 20300
80.000 155.575 101.600 85.725 512000 0.33 2.08 3.09 76300 42500 133000 1.80
3.1496 6.1250 4.0000 3.3750 115000 17100 9550 29900
80.000 200.025 115.888 80.216 655000 0.63 1.07 1.59 97500 106000 170000 0.92
3.1496 7.8750 4.5625 3.1581 147000 21900 23700 38200
80.962 136.525 69.850 53.975 249000 0.44 1.52 2.26 37100 28200 64600 1.31
3.1875 5.3750 2.7500 2.1250 56000 8330 6340 14500
80.962 139.992 82.550 66.675 333000 0.40 1.67 2.49 49600 34300 86400 1.45
3.1875 5.5115 3.2500 2.6250 75000 11200 7720 19400
80.962 152.400 88.900 76.200 398000 0.41 1.65 2.46 59300 41500 103000 1.43
3.1875 6.0000 3.5000 3.0000 89500 13300 9330 23200
80.962 155.575 101.600 85.725 512000 0.33 2.08 3.09 76300 42500 133000 1.80
3.1875 6.1250 4.0000 3.3750 115000 17100 9550 29900
82.550 115.888 47.625 39.690 145000 0.31 2.19 3.26 21700 11400 37700 1.90
3.2500 4.5625 1.8750 1.5626 32700 4870 2570 8470
82.550 115.888 47.625 39.690 145000 0.31 2.19 3.26 21700 11400 37700 1.90
3.2500 4.5625 1.8750 1.5626 32700 4870 2570 8470
82.550 136.525 69.850 53.975 249000 0.44 1.52 2.26 37100 28200 64600 1.31
3.2500 5.3750 2.7500 2.1250 56000 8330 6340 14500
82.550 136.525 69.850 53.975 249000 0.44 1.52 2.26 37100 28200 64600 1.31
3.2500 5.3750 2.7500 2.1250 56000 8330 6340 14500
82.550 139.992 82.550 66.675 333000 0.40 1.67 2.49 49600 34300 86400 1.45
3.2500 5.5115 3.2500 2.6250 75000 11200 7720 19400
82.550 139.992 82.550 66.675 333000 0.40 1.67 2.49 49600 34300 86400 1.45
3.2500 5.5115 3.2500 2.6250 75000 11200 7720 19400
82.550 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.2500 6.0000 3.2500 2.5000 78300 11700 8820 20300
82.550 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.2500 6.0000 3.2500 2.5000 78300 11700 8820 20300
82.550 152.400 95.250 76.200 398000 0.41 1.65 2.46 59300 41500 103000 1.43
3.2500 6.0000 3.7500 3.0000 89500 13300 9330 23200
82.550 155.575 101.600 85.725 512000 0.33 2.08 3.09 76300 42500 133000 1.80
3.2500 6.1250 4.0000 3.3750 115000 17100 9550 29900
82.550 161.925 104.775 85.725 528000 0.34 1.98 2.95 78500 45900 137000 1.71
3.2500 6.3750 4.1250 3.3750 119000 17700 10300 30700
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B264 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
9378 9320D X1S-9378
HH221430 HH221410D HH221430XA
34306 34478D X4S-34306
495AS 493DC X1S-495AS
495AS 493D X1S-495AS
595A 592D X1S-595A
661 654D
661 654DC X2S-661
750 742D
578 572D X1S-578
590 592D X1S-590
748 742D X1S-748
98316 98789D X1S-98316
496 493D X2S-496
581 572D X1S-581
662 654D X1S-662
740 742D
L116149 L116110DC L116149XA
L116149 L116110D L116149XC
495 493DC X1S-495
495 493D X3S-495
580 572D X2S-580
582 572D X1S-580
595 592DC X1S-595
595 592D X2S-595
663 654D X4S-663
749A 742D X2S-749A
757 752D X2S-757
3.5 105.0 2.3 164.0 118 18.6 0.1053 12.69
0.14 4.13 0.09 6.46
27.98
B
3.5 101.0 1.5 179.0 266 28.4 0.1072 18.92
0.14 3.98 0.06 7.05
41.71
3.5 90.0 0.8 116.0 69.3 27 0.1093 1.87
0.14 3.54 0.03 4.57
4.12
3.5 93.0 0.8 130.0 12.4 4.6 105 29.3 0.1252 3.99
0.14 3.66 0.03 5.12 0.49 0.18
8.80
3.5 93.0 0.8 130.0 105 29.3 0.1252 3.99
0.14 3.66 0.03 5.12
8.80
3.5 98.0 0.8 144.0 151 38.3 0.1416 6.54
0.14 3.86 0.03 5.67
14.42
Caption:
3.5 96.0 1.5 141.0 137 27.3 0.0919 7.07
0.14 3.78 0.06 5.55
15.58
3.5 96.0 1.5 141.0 17.3 5.3 137 27.3 0.0919 7.24
0.14 3.78 0.06 5.55 0.68 0.21
15.95
3.5 96.0 1.5 143.0 160 26.3 0.0898 8.33
0.14 3.78 0.06 5.63
18.37
3.5 95.0 0.8 133.0 126 32 0.1295 4.96
0.14 3.74 0.03 5.24
10.94
3.5 98.0 0.8 144.0 151 38.3 0.1416 6.53
0.14 3.86 0.03 5.67
14.41
3.0 96.0 1.5 143.0 160 26.3 0.0898 8.36
0.12 3.78 0.06 5.63
18.44
3.5 111.0 2.3 188.0 203 37.4 0.1197 17.29
0.14 4.37 0.09 7.40
38.11
3.5 95.0 0.8 130.0 105 29.3 0.1252 3.76
0.14 3.74 0.03 5.12
8.29
3.5 96.0 0.8 133.0 126 32 0.1295 4.88
0.14 3.78 0.03 5.24
10.75
3.5 98.0 1.5 141.0 137 27.3 0.0919 6.77
0.14 3.86 0.06 5.55
14.93
5.0 101.0 1.5 143.0 160 26.3 0.0898 8.16
0.20 3.98 0.06 5.63
17.98
1.5 90.0 0.8 111.0 6.1 2.3 97.2 64.3 0.1079 1.43
0.06 3.54 0.03 4.37 0.24 0.09
3.15
1.5 90.0 0.8 111.0 97.2 64.3 0.1079 1.43
0.06 3.54 0.03 4.37
3.15
3.5 97.0 0.8 130.0 12.4 4.6 105 29.3 0.1252 3.65
0.14 3.82 0.03 5.12 0.49 0.18
8.04
3.5 97.0 0.8 130.0 105 29.3 0.1252 3.65
0.14 3.82 0.03 5.12
8.04
3.5 98.0 0.8 133.0 126 32 0.1295 4.76
0.14 3.86 0.03 5.24
10.50
6.8 104.0 0.8 133.0 126 32 0.1295 4.68
0.27 4.09 0.03 5.24
10.32
3.5 100.0 0.8 144.0 14.2 5.3 151 36.8 0.1416 6.42
0.14 3.94 0.03 5.67 0.56 0.21
14.14
3.5 100.0 0.8 144.0 151 36.8 0.1416 6.42
0.14 3.94 0.03 5.67
14.14
3.5 99.0 1.5 141.0 137 27.3 0.0919 6.94
0.14 3.90 0.06 5.55
15.29
3.5 99.0 1.5 143.0 160 26.3 0.0898 8.12
0.14 3.90 0.06 5.63
17.90
3.5 100.0 1.5 150.0 177 29.4 0.0945 9.43
0.14 3.94 0.06 5.91
20.78
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B265
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
82.550 171.450 125.412 100.012 659000 0.30 2.26 3.36 98200 50300 171000 1.95
3.2500 6.7500 4.9375 3.9375 148000 22100 11300 38400
83.345 125.412 55.560 44.450 189000 0.42 1.62 2.42 28100 20000 49000 1.40
3.2813 4.9375 2.1874 1.7500 42500 6320 4500 11000
84.138 136.525 69.850 53.975 249000 0.44 1.52 2.26 37100 28200 64600 1.31
3.3125 5.3750 2.7500 2.1250 56000 8330 6340 14500
84.138 152.400 95.250 76.200 398000 0.41 1.65 2.46 59300 41500 103000 1.43
3.3125 6.0000 3.7500 3.0000 89500 13300 9330 23200
84.138 177.800 109.538 74.612 494000 0.76 0.88 1.31 73500 96200 128000 0.76
3.3125 7.0000 4.3125 2.9375 111000 16500 21600 28800
85.000 200.025 115.888 80.216 655000 0.63 1.07 1.59 97500 106000 170000 0.92
3.3465 7.8750 4.5625 3.1581 147000 21900 23700 38200
85.026 155.575 101.600 85.725 512000 0.33 2.08 3.09 76300 42500 133000 1.80
3.3475 6.1250 4.0000 3.3750 115000 17100 9550 29900
85.026 155.575 101.600 85.725 512000 0.33 2.08 3.09 76300 42500 133000 1.80
3.3475 6.1250 4.0000 3.3750 115000 17100 9550 29900
85.725 136.525 69.850 53.975 249000 0.44 1.52 2.26 37100 28200 64600 1.31
3.3750 5.3750 2.7500 2.1250 56000 8330 6340 14500
85.725 136.525 69.850 53.975 249000 0.44 1.52 2.26 37100 28200 64600 1.31
3.3750 5.3750 2.7500 2.1250 56000 8330 6340 14500
85.725 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.3750 6.0000 3.2500 2.5000 78300 11700 8820 20300
85.725 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.3750 6.0000 3.2500 2.5000 78300 11700 8820 20300
85.725 152.400 95.250 76.200 398000 0.41 1.65 2.46 59300 41500 103000 1.43
3.3750 6.0000 3.7500 3.0000 89500 13300 9330 23200
85.725 161.925 104.775 85.725 528000 0.34 1.98 2.95 78500 45900 137000 1.71
3.3750 6.3750 4.1250 3.3750 119000 17700 10300 30700
85.725 168.275 92.075 69.850 427000 0.47 1.43 2.14 63500 51200 111000 1.24
3.3750 6.6250 3.6250 2.7500 95900 14300 11500 24900
85.725 171.450 125.412 100.012 659000 0.30 2.26 3.36 98200 50300 171000 1.95
3.3750 6.7500 4.9375 3.9375 148000 22100 11300 38400
87.312 123.825 50.797 42.862 149000 0.33 2.05 3.05 22200 12600 38700 1.77
3.4375 4.8750 1.9999 1.6875 33600 5000 2820 8700
87.312 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.4375 6.0000 3.2500 2.5000 78300 11700 8820 20300
87.312 190.500 127.000 104.775 860000 0.33 2.02 3.00 128000 73400 223000 1.74
3.4375 7.5000 5.0000 4.1250 193000 28800 16500 50100
87.312 190.500 127.000 104.775 860000 0.33 2.02 3.00 128000 73400 223000 1.74
3.4375 7.5000 5.0000 4.1250 193000 28800 16500 50100
87.960 149.225 66.672 52.388 263000 0.49 1.37 2.04 39100 33000 68100 1.19
3.4630 5.8750 2.6249 2.0625 59000 8790 7410 15300
88.900 123.825 50.797 42.862 149000 0.33 2.05 3.05 22200 12600 38700 1.77
3.5000 4.8750 1.9999 1.6875 33600 5000 2820 8700
88.900 123.825 50.797 42.862 149000 0.33 2.05 3.05 22200 12600 38700 1.77
3.5000 4.8750 1.9999 1.6875 33600 5000 2820 8700
88.900 149.225 66.672 52.388 263000 0.49 1.37 2.04 39100 33000 68100 1.19
3.5000 5.8750 2.6249 2.0625 59000 8790 7410 15300
88.900 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.5000 6.0000 3.2500 2.5000 78300 11700 8820 20300
88.900 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.5000 6.0000 3.2500 2.5000 78300 11700 8820 20300
88.900 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.5000 6.0000 3.2500 2.5000 78300 11700 8820 20300
88.900 161.925 104.775 85.725 528000 0.34 1.98 2.95 78500 45900 137000 1.71
3.5000 6.3750 4.1250 3.3750 119000 17700 10300 30700
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B266 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
842 834D X1S-842
27690 27620DA X2S-27690
498 493D X4S-498
664 654D X1S-664
9386H 9320D X2S-9385
98335 98789D X1S-98335
749 742DC X2S-749
749 742D X3S-749
497 493DC X3S-497
497 493D X3S-497
596 592DC X1S-596
596 592D X1S-596
665 654D X1S-665
758 752D X2S-758
677 672D X1S-677
841 834D X2S-841
L217847 L217810D L217847XA
596-S 592D X2S-596
HH221432 HH221410DC HH221432XA
HH221432 HH221410D HH221432XA
42346 42587D X1S-42346
L217849 L217810DC L217849XA
L217849 L217810D L217849XB
42350 42587D X1S-42350
593 592DC X1S-593
593 592D X2S-593
593A 592D X1S-593
759 752D X8S-759
3.5 101.0 0.8 155.0 198 34.8 0.0937 12.90
0.14 3.98 0.03 6.10
28.45
B
3.5 96.0 0.8 0.0 14.2 2.3 98.2 41.8 0.1198 2.30
0.14 3.78 0.03 0.00 0.56 0.09
5.08
3.5 98.0 0.8 130.0 105 29.3 0.1252 3.53
0.14 3.86 0.03 5.12
7.79
3.5 100.0 1.5 141.0 137 27.3 0.0919 6.80
0.14 3.94 0.06 5.55
15.00
3.5 111.0 2.3 164.0 118 18.6 0.1053 11.28
0.14 4.37 0.09 6.46
24.87
3.5 115.0 2.3 188.0 203 37.4 0.1197 16.86
0.14 4.53 0.09 7.40
37.17
Caption:
3.5 101.0 1.5 143.0 19.0 6.4 160 26.3 0.0898 7.90
0.14 3.98 0.06 5.63 0.75 0.25
17.41
3.5 101.0 1.5 143.0 160 26.3 0.0898 7.90
0.14 3.98 0.06 5.63
17.41
3.5 99.0 0.8 130.0 12.4 4.6 105 29.3 0.1252 3.43
0.14 3.90 0.03 5.12 0.49 0.18
7.56
3.5 99.0 0.8 130.0 105 29.3 0.1252 3.43
0.14 3.90 0.03 5.12
7.56
3.5 102.0 0.8 144.0 14.2 5.3 151 36.8 0.1416 6.10
0.14 4.02 0.03 5.67 0.56 0.21
13.46
3.5 102.0 0.8 144.0 151 36.8 0.1416 6.10
0.14 4.02 0.03 5.67
13.46
3.5 102.0 1.5 141.0 137 27.3 0.0919 6.68
0.14 4.02 0.06 5.55
14.72
3.5 103.0 1.5 150.0 177 29.4 0.0945 9.06
0.14 4.06 0.06 5.91
19.98
3.5 105.0 0.8 160.0 182 37.2 0.1056 9.18
0.14 4.13 0.03 6.30
20.23
3.5 104.0 0.8 155.0 198 34.8 0.0937 12.58
0.14 4.09 0.03 6.10
27.73
1.5 96.0 0.8 119.0 111 74.7 0.1152 1.78
0.06 3.78 0.03 4.69
3.92
3.5 103.0 0.8 144.0 151 38.3 0.1416 5.99
0.14 4.06 0.03 5.67
13.20
8.0 118.0 1.5 179.0 22.1 5.3 266 28.4 0.1072 17.58
0.31 4.65 0.06 7.05 0.87 0.21
38.76
8.0 118.0 1.5 179.0 266 28.4 0.1072 17.58
0.31 4.65 0.06 7.05
38.76
3.0 103.0 0.8 143.0 130 37.2 0.1386 4.57
0.12 4.06 0.03 5.63
10.06
1.5 97.0 0.8 119.0 7.9 2.3 111 74.7 0.1152 1.69
0.06 3.82 0.03 4.69 0.31 0.09
3.72
1.5 97.0 0.8 119.0 111 74.7 0.1152 1.69
0.06 3.82 0.03 4.69
3.72
3.0 104.0 0.8 143.0 130 37.2 0.1386 4.50
0.12 4.09 0.03 5.63
9.93
3.5 104.0 0.8 144.0 14.2 5.3 151 36.8 0.1416 5.84
0.14 4.09 0.03 5.67 0.56 0.21
12.88
3.5 104.0 0.8 144.0 151 36.8 0.1416 5.84
0.14 4.09 0.03 5.67
12.88
6.4 110.0 0.8 144.0 151 36.8 0.1416 5.78
0.25 4.33 0.03 5.67
12.74
3.5 106.0 1.5 150.0 177 29.4 0.0945 8.71
0.14 4.17 0.06 5.91
19.19
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B267
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
88.900 161.925 104.775 85.725 528000 0.34 1.98 2.95 78500 45900 137000 1.71
3.5000 6.3750 4.1250 3.3750 119000 17700 10300 30700
88.900 168.275 92.075 69.850 427000 0.47 1.43 2.14 63500 51200 111000 1.24
3.5000 6.6250 3.6250 2.7500 95900 14300 11500 24900
88.900 168.275 92.075 69.850 427000 0.47 1.43 2.14 63500 51200 111000 1.24
3.5000 6.6250 3.6250 2.7500 95900 14300 11500 24900
88.900 171.450 125.412 100.012 659000 0.30 2.26 3.36 98200 50300 171000 1.95
3.5000 6.7500 4.9375 3.9375 148000 22100 11300 38400
88.900 180.975 104.775 85.725 558000 0.39 1.75 2.61 83100 54800 145000 1.51
3.5000 7.1250 4.1250 3.3750 125000 18700 12300 32500
88.900 190.500 127.000 104.775 860000 0.33 2.02 3.00 128000 73400 223000 1.74
3.5000 7.5000 5.0000 4.1250 193000 28800 16500 50100
88.900 200.025 115.888 80.216 655000 0.63 1.07 1.59 97500 106000 170000 0.92
3.5000 7.8750 4.5625 3.1581 147000 21900 23700 38200
89.891 171.450 125.412 100.012 659000 0.30 2.26 3.36 98200 50300 171000 1.95
3.5390 6.7500 4.9375 3.9375 148000 22100 11300 38400
89.916 189.967 85.852 54.102 462000 0.87 0.78 1.16 68800 102000 120000 0.67
3.5400 7.4790 3.3800 2.1300 104000 15500 22900 26900
89.980 161.900 69.850 44.450 327000 0.73 0.92 1.37 48700 61100 84900 0.80
3.5425 6.3740 2.7500 1.7500 73600 11000 13700 19100
90.488 161.925 104.775 85.725 528000 0.34 1.98 2.95 78500 45900 137000 1.71
3.5625 6.3750 4.1250 3.3750 119000 17700 10300 30700
92.075 149.225 66.672 52.388 263000 0.49 1.37 2.04 39100 33000 68100 1.19
3.6250 5.8750 2.6249 2.0625 59000 8790 7410 15300
92.075 149.225 66.672 52.388 263000 0.49 1.37 2.04 39100 33000 68100 1.19
3.6250 5.8750 2.6249 2.0625 59000 8790 7410 15300
92.075 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.6250 6.0000 3.2500 2.5000 78300 11700 8820 20300
92.075 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.6250 6.0000 3.2500 2.5000 78300 11700 8820 20300
92.075 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.6250 6.0000 3.2500 2.5000 78300 11700 8820 20300
92.075 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.6250 6.0000 3.2500 2.5000 78300 11700 8820 20300
92.075 168.275 92.075 69.850 427000 0.47 1.43 2.14 63500 51200 111000 1.24
3.6250 6.6250 3.6250 2.7500 95900 14300 11500 24900
92.075 180.975 104.775 85.725 558000 0.39 1.75 2.61 83100 54800 145000 1.51
3.6250 7.1250 4.1250 3.3750 125000 18700 12300 32500
93.662 149.225 66.672 52.388 263000 0.49 1.37 2.04 39100 33000 68100 1.19
3.6875 5.8750 2.6249 2.0625 59000 8790 7410 15300
93.662 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.6875 6.0000 3.2500 2.5000 78300 11700 8820 20300
95.250 130.175 47.622 39.688 154000 0.35 1.93 2.88 22900 13700 39900 1.67
3.7500 5.1250 1.8749 1.5625 34600 5150 3080 8960
95.250 136.525 68.260 57.150 225000 0.28 2.38 3.54 33500 16300 58300 2.06
3.7500 5.3750 2.6874 2.2500 50600 7530 3660 13100
95.250 149.225 66.672 52.388 263000 0.49 1.37 2.04 39100 33000 68100 1.19
3.7500 5.8750 2.6249 2.0625 59000 8790 7410 15300
95.250 149.225 66.672 52.388 263000 0.49 1.37 2.04 39100 33000 68100 1.19
3.7500 5.8750 2.6249 2.0625 59000 8790 7410 15300
95.250 149.225 66.672 52.388 263000 0.49 1.37 2.04 39100 33000 68100 1.19
3.7500 5.8750 2.6249 2.0625 59000 8790 7410 15300
95.250 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.7500 6.0000 3.2500 2.5000 78300 11700 8820 20300
95.250 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.7500 6.0000 3.2500 2.5000 78300 11700 8820 20300
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B268 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
766 752D
679 672DC X1S-679
679 672D X2S-679
850 834D X2S-850
775 774D X2S-775
HH221434 HH221410D HH221434XB
98350 98789D X3S-98350
850A 834D X1S-850A
HM921343 HM921310D HM921343XA
M919048 M919010D M919049XC
760 752D X1S-760
42362 42587DC X1S-42362
42362 42587D X3S-42362
598 592DC X1S-598
598 592D X3S-598
598X 592DC X1S-598
598X 592D X1S-598
681 672D X1S-681
778 774D X1S-778
42368 42587D X1S-42368
597 592D X1S-597
L319249 L319210D L319249XB
LM119348 LM119311D LM119348XA
42375 42587D X1S-42376
42376 42587DC X1S-42376
42376 42587D X1S-42376
594 592DC X2S-594
594 592D X3S-594
7.0 113.0 1.5 150.0 177 29.4 0.0945 8.52
0.28 4.45 0.06 5.91
18.78
B
3.5 107.0 0.8 160.0 15.7 4.6 182 37.2 0.1056 8.86
0.14 4.21 0.03 6.30 0.62 0.18
19.52
3.5 107.0 0.8 160.0 182 37.2 0.1056 8.86
0.14 4.21 0.03 6.30
19.52
3.5 106.0 0.8 155.0 198 34.8 0.0937 12.21
0.14 4.17 0.03 6.10
26.91
4.8 112.0 1.5 168.0 227 41.3 0.1067 12.13
0.19 4.41 0.06 6.61
26.73
8.0 120.0 1.5 179.0 266 28.4 0.1072 17.36
0.31 4.72 0.06 7.05
38.27
Caption:
3.5 118.0 2.3 188.0 203 37.4 0.1197 16.33
0.14 4.65 0.09 7.40
36.00
3.5 107.0 0.8 155.0 198 34.8 0.0937 12.08
0.14 4.21 0.03 6.10
26.64
3.5 117.0 1.5 181.0 137 32 0.1143 10.44
0.14 4.61 0.06 7.13
23.02
3.5 109.0 1.5 154.0 102 30.7 0.0990 5.40
0.14 4.29 0.06 6.06
11.90
3.5 107.0 1.5 150.0 177 29.4 0.0945 8.56
0.14 4.21 0.06 5.91
18.87
3.5 107.0 0.8 143.0 10.9 3.8 130 37.2 0.1386 4.28
0.14 4.21 0.03 5.63 0.43 0.15
9.44
3.5 107.0 0.8 143.0 130 37.2 0.1386 4.28
0.14 4.21 0.03 5.63
9.44
3.5 107.0 0.8 144.0 14.2 5.3 151 36.8 0.1416 5.55
0.14 4.21 0.03 5.67 0.56 0.21
12.24
3.5 107.0 0.8 144.0 151 36.8 0.1416 5.55
0.14 4.21 0.03 5.67
12.24
3.5 107.0 0.8 144.0 14.2 5.3 151 38.3 0.1416 5.54
0.14 4.21 0.03 5.67 0.56 0.21
12.22
3.5 107.0 0.8 144.0 151 38.3 0.1416 5.54
0.14 4.21 0.03 5.67
12.22
3.5 110.0 0.8 160.0 182 37.2 0.1056 8.53
0.14 4.33 0.03 6.30
18.80
3.5 111.0 1.5 168.0 227 41.3 0.1067 11.73
0.14 4.37 0.06 6.61
25.85
3.0 107.0 0.8 143.0 130 37.2 0.1386 4.17
0.12 4.21 0.03 5.63
9.20
3.5 109.0 0.8 144.0 151 38.3 0.1416 5.41
0.14 4.29 0.03 5.67
11.93
1.5 103.0 0.8 125.0 125 90.7 0.1220 1.75
0.06 4.06 0.03 4.92
3.87
2.3 105.0 0.8 131.0 149 69 0.1213 2.98
0.09 4.13 0.03 5.16
6.57
3.0 108.0 0.8 143.0 130 37.2 0.1386 4.05
0.12 4.25 0.03 5.63
8.92
3.5 109.0 0.8 143.0 10.9 3.8 130 37.2 0.1386 3.94
0.14 4.29 0.03 5.63 0.43 0.15
8.69
3.5 109.0 0.8 143.0 130 37.2 0.1386 4.02
0.14 4.29 0.03 5.63
8.87
3.5 110.0 0.8 144.0 14.2 5.3 151 36.8 0.1416 5.26
0.14 4.33 0.03 5.67 0.56 0.21
11.61
3.5 110.0 0.8 144.0 151 36.8 0.1416 5.26
0.14 4.33 0.03 5.67
11.61
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B269
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
95.250 152.400 82.550 63.500 348000 0.44 1.53 2.27 51900 39200 90300 1.32
3.7500 6.0000 3.2500 2.5000 78300 11700 8820 20300
95.250 161.925 82.547 61.912 360000 0.47 1.42 2.12 53600 43600 93400 1.23
3.7500 6.3750 3.2499 2.4375 81000 12100 9800 21000
95.250 168.275 92.075 69.850 427000 0.47 1.43 2.14 63500 51200 111000 1.24
3.7500 6.6250 3.6250 2.7500 95900 14300 11500 24900
95.250 168.275 92.075 69.850 427000 0.47 1.43 2.14 63500 51200 111000 1.24
3.7500 6.6250 3.6250 2.7500 95900 14300 11500 24900
95.250 180.975 104.775 85.725 558000 0.39 1.75 2.61 83100 54800 145000 1.51
3.7500 7.1250 4.1250 3.3750 125000 18700 12300 32500
95.250 180.975 104.775 85.725 558000 0.39 1.75 2.61 83100 54800 145000 1.51
3.7500 7.1250 4.1250 3.3750 125000 18700 12300 32500
95.250 190.500 127.000 104.775 860000 0.33 2.02 3.00 128000 73400 223000 1.74
3.7500 7.5000 5.0000 4.1250 193000 28800 16500 50100
96.838 149.225 66.672 52.388 263000 0.49 1.37 2.04 39100 33000 68100 1.19
3.8125 5.8750 2.6249 2.0625 59000 8790 7410 15300
96.838 149.225 66.672 52.388 263000 0.49 1.37 2.04 39100 33000 68100 1.19
3.8125 5.8750 2.6249 2.0625 59000 8790 7410 15300
98.425 161.925 82.547 61.912 360000 0.47 1.42 2.12 53600 43600 93400 1.23
3.8750 6.3750 3.2499 2.4375 81000 12100 9800 21000
98.425 168.275 92.075 69.850 427000 0.47 1.43 2.14 63500 51200 111000 1.24
3.8750 6.6250 3.6250 2.7500 95900 14300 11500 24900
98.425 168.275 92.075 69.850 427000 0.47 1.43 2.14 63500 51200 111000 1.24
3.8750 6.6250 3.6250 2.7500 95900 14300 11500 24900
98.425 180.000 104.775 85.725 558000 0.39 1.75 2.61 83100 54800 145000 1.51
3.8750 7.0866 4.1250 3.3750 125000 18700 12300 32500
98.425 180.975 104.775 85.725 558000 0.39 1.75 2.61 83100 54800 145000 1.51
3.8750 7.1250 4.1250 3.3750 125000 18700 12300 32500
98.425 190.500 127.000 104.775 860000 0.33 2.02 3.00 128000 73400 223000 1.74
3.8750 7.5000 5.0000 4.1250 193000 28800 16500 50100
98.425 212.725 142.875 117.475 1100000 0.33 2.07 3.09 163000 91000 284000 1.79
3.8750 8.3750 5.6250 4.6250 246000 36700 20500 63900
99.975 212.725 142.875 117.475 1100000 0.33 2.07 3.09 163000 91000 284000 1.79
3.9360 8.3750 5.6250 4.6250 246000 36700 20500 63900
99.980 196.850 103.378 74.422 608000 0.61 1.11 1.66 90500 93900 158000 0.96
3.9362 7.7500 4.0700 2.9300 137000 20300 21100 35400
99.982 190.500 127.000 104.775 860000 0.33 2.02 3.00 128000 73400 223000 1.74
3.9363 7.5000 5.0000 4.1250 193000 28800 16500 50100
100.000 180.000 104.775 85.725 558000 0.39 1.75 2.61 83100 54800 145000 1.51
3.9370 7.0866 4.1250 3.3750 125000 18700 12300 32500
100.000 180.975 104.775 85.725 558000 0.39 1.75 2.61 83100 54800 145000 1.51
3.9370 7.1250 4.1250 3.3750 125000 18700 12300 32500
100.000 190.500 127.000 101.600 738000 0.33 2.02 3.00 110000 63000 191000 1.74
3.9370 7.5000 5.0000 4.0000 166000 24700 14200 43000
100.000 200.025 115.888 80.216 655000 0.63 1.07 1.59 97500 106000 170000 0.92
3.9370 7.8750 4.5625 3.1581 147000 21900 23700 38200
100.012 161.925 82.547 61.912 360000 0.47 1.42 2.12 53600 43600 93400 1.23
3.9375 6.3750 3.2499 2.4375 81000 12100 9800 21000
101.600 146.050 49.210 38.895 219000 0.39 1.74 2.59 32500 21600 56700 1.51
4.0000 5.7500 1.9374 1.5313 49100 7320 4860 12700
101.600 146.050 49.212 39.688 155000 0.39 1.72 2.56 23100 15500 40100 1.49
4.0000 5.7500 1.9375 1.5625 34800 5180 3480 9020
101.600 161.925 82.547 61.912 360000 0.47 1.42 2.12 53600 43600 93400 1.23
4.0000 6.3750 3.2499 2.4375 81000 12100 9800 21000
101.600 161.925 82.547 61.912 360000 0.47 1.42 2.12 53600 43600 93400 1.23
4.0000 6.3750 3.2499 2.4375 81000 12100 9800 21000
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B270 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
594A 592D X2S-594
52375 52637D X2S-52375
683 672DC X1S-683
683 672D X2S-683
776 774D X2S-776
777 774D
HH221440 HH221410D HH221440XA
42381 42587DC X1S-42381
42381 42587D X2S-42381
52387 52637D X3S-52387
685 672DC X1S-685
685 672D X3S-685
779 773D X4S-779
779 774D X3S-779
HH221442 HH221410D HH221442XB
HH224332 HH224310CD HH224332XA
HH224334 HH224310CD HH224334XA
HM821547 HM821511D HM821547XB
HH221447 HH221410D HH221447XC
783 773D X3S-783
783 774D X3S-783
863X 854DC X1S-863X
98394X 98789D X1S-98394X
52393 52637D X2S-52393
LM520349 LM520310D LM520349XA
L521945 L521910D L521945XA
52400 52637DC X1S-52400
52400 52637D X7S-52400
5.0 113.0 0.8 144.0 151 36.8 0.1416 5.23
0.20 4.45 0.03 5.67
11.53
B
3.5 112.0 0.8 154.0 175 41.7 0.1519 6.50
0.14 4.41 0.03 6.06
14.33
3.5 113.0 0.8 160.0 15.7 4.6 182 37.2 0.1056 8.19
0.14 4.45 0.03 6.30 0.62 0.18
18.06
3.5 113.0 0.8 160.0 182 37.2 0.1056 8.19
0.14 4.45 0.03 6.30
18.06
3.5 114.0 1.5 168.0 227 41.3 0.1067 11.37
0.14 4.49 0.06 6.61
25.06
9.7 126.0 1.5 168.0 227 41.3 0.1067 10.97
0.38 4.96 0.06 6.61
24.19
Caption:
8.0 125.0 1.5 179.0 266 28.4 0.1072 16.44
0.31 4.92 0.06 7.05
36.24
3.5 110.0 0.8 143.0 10.9 3.8 130 37.2 0.1386 3.91
0.14 4.33 0.03 5.63 0.43 0.15
8.62
3.5 110.0 0.8 143.0 130 37.2 0.1386 3.91
0.14 4.33 0.03 5.63
8.62
3.5 114.0 0.8 154.0 175 41.7 0.1519 6.18
0.14 4.49 0.03 6.06
13.62
3.5 116.0 0.8 160.0 15.7 4.6 182 37.2 0.1056 7.90
0.14 4.57 0.03 6.30 0.62 0.18
17.41
3.5 116.0 0.8 160.0 182 37.2 0.1056 7.90
0.14 4.57 0.03 6.30
17.41
3.5 116.0 0.8 168.0 227 41.3 0.1067 10.86
0.14 4.57 0.03 6.61
23.94
3.5 116.0 1.5 168.0 227 41.3 0.1067 10.98
0.14 4.57 0.06 6.61
24.21
3.5 119.0 1.5 179.0 266 28.4 0.1072 16.09
0.14 4.69 0.06 7.05
35.46
3.5 123.0 1.5 201.5 25.4 7.9 367 47.8 0.1182 23.31
0.14 4.84 0.06 7.94 1.00 0.31
51.40
3.5 124.0 1.5 201.5 25.4 7.9 367 43.4 0.1182 23.13
0.14 4.88 0.06 7.94 1.00 0.31
51.00
3.5 123.0 1.5 187.0 166 24.2 0.1100 12.48
0.14 4.84 0.06 7.36
27.52
6.4 126.0 1.5 179.0 266 28.4 0.1072 15.77
0.25 4.96 0.06 7.05
34.77
3.5 118.0 0.8 168.0 227 41.3 0.1067 10.68
0.14 4.65 0.03 6.61
23.54
3.5 118.0 1.5 168.0 227 41.3 0.1067 10.78
0.14 4.65 0.06 6.61
23.77
6.0 124.0 1.5 174.0 22.1 6.4 264 44.9 0.1072 15.05
0.24 4.88 0.06 6.85 0.87 0.25
33.19
3.5 126.0 2.3 188.0 203 37.4 0.1197 14.94
0.14 4.96 0.09 7.40
32.93
3.5 116.0 0.8 154.0 175 41.7 0.1519 6.02
0.14 4.57 0.03 6.06
13.27
1.5 110.0 0.8 140.0 121 58.7 0.1249 2.43
0.06 4.33 0.03 5.51
5.37
1.5 112.0 0.8 141.0 152 108 0.1346 2.54
0.06 4.41 0.03 5.55
5.60
3.5 117.0 0.8 154.0 14.2 5.3 175 41.7 0.1519 5.89
0.14 4.61 0.03 6.06 0.56 0.21
12.99
3.5 117.0 0.8 154.0 175 41.7 0.1519 5.89
0.14 4.61 0.03 6.06
12.99
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B271
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
101.600 161.925 82.547 61.912 360000 0.47 1.42 2.12 53600 43600 93400 1.23
4.0000 6.3750 3.2499 2.4375 81000 12100 9800 21000
101.600 168.275 92.075 69.850 427000 0.47 1.43 2.14 63500 51200 111000 1.24
4.0000 6.6250 3.6250 2.7500 95900 14300 11500 24900
101.600 168.275 92.075 69.850 427000 0.47 1.43 2.14 63500 51200 111000 1.24
4.0000 6.6250 3.6250 2.7500 95900 14300 11500 24900
101.600 180.000 104.775 85.725 558000 0.39 1.75 2.61 83100 54800 145000 1.51
4.0000 7.0866 4.1250 3.3750 125000 18700 12300 32500
101.600 180.000 104.775 85.725 558000 0.39 1.75 2.61 83100 54800 145000 1.51
4.0000 7.0866 4.1250 3.3750 125000 18700 12300 32500
101.600 180.975 104.775 85.725 558000 0.39 1.75 2.61 83100 54800 145000 1.51
4.0000 7.1250 4.1250 3.3750 125000 18700 12300 32500
101.600 190.500 127.000 101.600 738000 0.33 2.02 3.00 110000 63000 191000 1.74
4.0000 7.5000 5.0000 4.0000 166000 24700 14200 43000
101.600 190.500 127.000 104.775 860000 0.33 2.02 3.00 128000 73400 223000 1.74
4.0000 7.5000 5.0000 4.1250 193000 28800 16500 50100
101.600 190.500 127.000 104.775 860000 0.33 2.02 3.00 128000 73400 223000 1.74
4.0000 7.5000 5.0000 4.1250 193000 28800 16500 50100
101.600 200.025 115.888 80.216 655000 0.63 1.07 1.59 97500 106000 170000 0.92
4.0000 7.8750 4.5625 3.1581 147000 21900 23700 38200
101.600 200.025 115.888 80.216 655000 0.63 1.07 1.59 97500 106000 170000 0.92
4.0000 7.8750 4.5625 3.1581 147000 21900 23700 38200
101.600 212.725 142.875 117.475 922000 0.33 2.07 3.09 137000 76600 239000 1.79
4.0000 8.3750 5.6250 4.6250 207000 30900 17200 53700
101.600 212.725 142.875 117.475 1100000 0.33 2.07 3.09 163000 91000 284000 1.79
4.0000 8.3750 5.6250 4.6250 246000 36700 20500 63900
101.600 214.312 115.888 84.138 758000 0.67 1.00 1.49 113000 130000 196000 0.87
4.0000 8.4375 4.5625 3.3125 170000 25400 29300 44200
104.775 180.000 104.775 85.725 558000 0.39 1.75 2.61 83100 54800 145000 1.51
4.1250 7.0866 4.1250 3.3750 125000 18700 12300 32500
104.775 180.000 104.775 85.725 558000 0.39 1.75 2.61 83100 54800 145000 1.51
4.1250 7.0866 4.1250 3.3750 125000 18700 12300 32500
104.775 180.000 104.775 85.725 558000 0.39 1.75 2.61 83100 54800 145000 1.51
4.1250 7.0866 4.1250 3.3750 125000 18700 12300 32500
104.775 180.975 104.775 85.725 558000 0.39 1.75 2.61 83100 54800 145000 1.51
4.1250 7.1250 4.1250 3.3750 125000 18700 12300 32500
104.775 180.975 104.775 85.725 558000 0.39 1.75 2.61 83100 54800 145000 1.51
4.1250 7.1250 4.1250 3.3750 125000 18700 12300 32500
104.775 180.975 104.775 85.725 558000 0.39 1.75 2.61 83100 54800 145000 1.51
4.1250 7.1250 4.1250 3.3750 125000 18700 12300 32500
104.775 190.500 106.362 80.962 586000 0.42 1.62 2.42 87300 62200 152000 1.40
4.1250 7.5000 4.1875 3.1875 132000 19600 14000 34200
106.362 165.100 82.550 63.500 365000 0.50 1.36 2.02 54400 46300 94600 1.18
4.1875 6.5000 3.2500 2.5000 82100 12200 10400 21300
107.950 146.050 49.212 39.688 155000 0.39 1.72 2.56 23100 15500 40100 1.49
4.2500 5.7500 1.9375 1.5625 34800 5180 3480 9020
107.950 146.050 49.212 39.688 155000 0.39 1.72 2.56 23100 15500 40100 1.49
4.2500 5.7500 1.9375 1.5625 34800 5180 3480 9020
107.950 158.750 53.978 39.688 186000 0.61 1.11 1.66 27600 28700 48100 0.96
4.2500 6.2500 2.1251 1.5625 41700 6220 6450 10800
107.950 159.987 74.612 58.738 316000 0.40 1.68 2.50 47000 32300 81800 1.45
4.2500 6.2987 2.9375 2.3125 70900 10600 7270 18400
107.950 165.100 82.550 63.500 365000 0.50 1.36 2.02 54400 46300 94600 1.18
4.2500 6.5000 3.2500 2.5000 82100 12200 10400 21300
107.950 190.500 106.362 80.962 586000 0.42 1.62 2.42 87300 62200 152000 1.40
4.2500 7.5000 4.1875 3.1875 132000 19600 14000 34200
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B272 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
52401 52637D X1S-52400
687 672DC X1S-687
687 672D X3S-687
780 773DC X1S-780
780 773D X2S-780
780 774D X1S-780
861 854DC X3S-861
HH221449 HH221410DC HH221449XA
HH221449 HH221410D HH221449XB
98400 98789DC X1S-98400
98400 98789D X2S-98400
941 932CD X2S-941
HH224335 HH224310CD HH224335XB
H924033 H924010D H924033XA
782 773D X3S-782
786 773D X1S-786
787 773D X3S-782
782 774DC X3S-782
782 774D X3S-782
786 774DC X3S-782
71412 71751D X2S-71412
56418 56650D X2S-56418
L521949 L521910DC L521949XA
L521949 L521910D L521949XA
37425 37626D X1S-37425
LM522546 LM522510D LM522546XB
56425 56650D X2S-56425
71425 71751DC X2S-71425
8.0 126.0 0.8 154.0 175 41.7 0.1519 5.89
0.31 4.96 0.03 6.06
12.99
B
3.5 118.0 0.8 160.0 15.7 4.6 182 37.2 0.1056 7.64
0.14 4.65 0.03 6.30 0.62 0.18
16.85
3.5 118.0 0.8 160.0 182 37.2 0.1056 7.64
0.14 4.65 0.03 6.30
16.85
3.5 119.0 0.8 168.0 19.0 6.4 227 38.2 0.1067 10.69
0.14 4.69 0.03 6.61 0.75 0.25
23.56
3.5 119.0 0.8 168.0 227 38.2 0.1067 10.69
0.14 4.69 0.03 6.61
23.56
3.5 119.0 1.5 168.0 227 38.2 0.1067 10.63
0.14 4.69 0.06 6.61
23.44
Caption:
8.0 129.0 1.5 174.0 22.1 6.4 264 44.9 0.1072 14.75
0.31 5.08 0.06 6.85 0.87 0.25
32.52
8.0 131.0 1.5 179.0 22.1 5.3 266 28.4 0.1072 15.47
0.31 5.16 0.06 7.05 0.87 0.21
34.11
8.0 131.0 1.5 179.0 266 28.4 0.1072 15.47
0.31 5.16 0.06 7.05
34.11
3.5 128.0 2.3 188.0 17.3 8.6 203 37.4 0.1197 14.67
0.14 5.04 0.09 7.40 0.68 0.34
32.35
3.5 128.0 2.3 188.0 203 37.4 0.1197 14.67
0.14 5.04 0.09 7.40
32.34
7.0 130.0 1.5 193.0 22.1 8.6 339 39.7 0.1153 22.54
0.28 5.12 0.06 7.60 0.87 0.34
49.69
7.0 132.0 1.5 201.5 25.4 7.9 367 43.4 0.1182 22.75
0.28 5.20 0.06 7.94 1.00 0.31
50.15
3.5 132.0 1.5 205.0 246 32.2 0.1299 19.23
0.14 5.20 0.06 8.07
42.39
3.5 122.0 0.8 168.0 227 38.2 0.1067 10.26
0.14 4.80 0.03 6.61
22.62
6.4 128.0 0.8 168.0 227 38.2 0.1067 10.02
0.25 5.04 0.03 6.61
22.10
7.0 129.0 0.8 168.0 227 41.3 0.1067 10.16
0.28 5.08 0.03 6.61
22.39
3.5 122.0 1.5 168.0 19.0 6.4 227 38.2 0.1067 10.51
0.14 4.80 0.06 6.61 0.75 0.25
23.18
3.5 122.0 1.5 168.0 227 38.2 0.1067 10.20
0.14 4.80 0.06 6.61
22.49
6.4 128.0 1.5 168.0 19.0 6.4 227 38.2 0.1067 10.44
0.25 5.04 0.06 6.61 0.75 0.25
23.01
3.5 124.0 1.5 181.0 269 45.7 0.1156 12.40
0.14 4.88 0.06 7.13
27.34
3.5 122.0 0.8 159.0 191 47.7 0.1584 5.95
0.14 4.80 0.03 6.26
13.12
1.5 116.0 0.8 141.0 7.9 3.0 152 108 0.1346 2.20
0.06 4.57 0.03 5.55 0.31 0.12
4.84
1.5 116.0 0.8 141.0 152 108 0.1346 2.20
0.06 4.57 0.03 5.55
4.84
3.5 122.0 0.8 152.0 124 57 0.1443 3.21
0.14 4.80 0.03 5.98
7.07
3.5 122.0 0.8 154.0 232 63.3 0.1576 5.07
0.14 4.80 0.03 6.06
11.19
3.5 123.0 0.8 159.0 191 47.7 0.1584 5.80
0.14 4.84 0.03 6.26
12.78
3.5 126.0 1.5 181.0 17.3 5.3 269 45.7 0.1156 11.87
0.14 4.96 0.06 7.13 0.68 0.21
26.18
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B273
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
107.950 190.500 106.362 80.962 586000 0.42 1.62 2.42 87300 62200 152000 1.40
4.2500 7.5000 4.1875 3.1875 132000 19600 14000 34200
107.950 212.725 142.875 117.475 922000 0.33 2.07 3.09 137000 76600 239000 1.79
4.2500 8.3750 5.6250 4.6250 207000 30900 17200 53700
107.950 212.725 142.875 117.475 1100000 0.33 2.07 3.09 163000 91000 284000 1.79
4.2500 8.3750 5.6250 4.6250 246000 36700 20500 63900
109.538 158.750 53.978 39.688 186000 0.61 1.11 1.66 27600 28700 48100 0.96
4.3125 6.2500 2.1251 1.5625 41700 6220 6450 10800
109.538 158.750 53.978 39.688 186000 0.61 1.11 1.66 27600 28700 48100 0.96
4.3125 6.2500 2.1251 1.5625 41700 6220 6450 10800
109.952 190.500 106.362 80.962 586000 0.42 1.62 2.42 87300 62200 152000 1.40
4.3288 7.5000 4.1875 3.1875 132000 19600 14000 34200
110.000 214.312 115.888 84.138 758000 0.67 1.00 1.49 113000 130000 196000 0.87
4.3301 8.4375 4.5625 3.3125 170000 25400 29300 44200
109.987 159.987 74.612 58.738 316000 0.40 1.68 2.50 47000 32300 81800 1.45
4.3302 6.2987 2.9375 2.3125 70900 10600 7270 18400
109.987 159.987 74.612 58.738 316000 0.40 1.68 2.50 47000 32300 81800 1.45
4.3302 6.2987 2.9375 2.3125 70900 10600 7270 18400
109.992 177.800 92.075 69.850 443000 0.52 1.31 1.95 65900 58300 115000 1.13
4.3304 7.0000 3.6250 2.7500 99600 14800 13100 25800
110.000 212.725 142.875 117.475 922000 0.33 2.07 3.09 137000 76600 239000 1.79
4.3307 8.3750 5.6250 4.6250 207000 30900 17200 53700
111.125 190.500 106.362 80.962 586000 0.42 1.62 2.42 87300 62200 152000 1.40
4.3750 7.5000 4.1875 3.1875 132000 19600 14000 34200
111.125 214.312 115.888 84.138 758000 0.67 1.00 1.49 113000 130000 196000 0.87
4.3750 8.4375 4.5625 3.3125 170000 25400 29300 44200
111.125 241.300 158.750 107.950 1080000 0.73 0.92 1.37 161000 202000 281000 0.80
4.3750 9.5000 6.2500 4.2500 243000 36200 45400 63100
114.300 152.400 47.625 38.100 161000 0.41 1.63 2.43 23900 16900 41700 1.41
4.5000 6.0000 1.8750 1.5000 36200 5380 3810 9370
114.300 177.800 92.075 69.850 443000 0.52 1.31 1.95 65900 58300 115000 1.13
4.5000 7.0000 3.6250 2.7500 99600 14800 13100 25800
114.300 177.800 92.075 69.850 443000 0.52 1.31 1.95 65900 58300 115000 1.13
4.5000 7.0000 3.6250 2.7500 99600 14800 13100 25800
114.300 190.500 106.362 80.962 586000 0.42 1.62 2.42 87300 62200 152000 1.40
4.5000 7.5000 4.1875 3.1875 132000 19600 14000 34200
114.300 190.500 106.362 80.962 586000 0.42 1.62 2.42 87300 62200 152000 1.40
4.5000 7.5000 4.1875 3.1875 132000 19600 14000 34200
114.300 212.725 142.875 117.475 922000 0.33 2.07 3.09 137000 76600 239000 1.79
4.5000 8.3750 5.6250 4.6250 207000 30900 17200 53700
114.300 212.725 142.875 117.475 1100000 0.33 2.07 3.09 163000 91000 284000 1.79
4.5000 8.3750 5.6250 4.6250 246000 36700 20500 63900
114.300 228.600 115.888 84.138 798000 0.74 0.92 1.36 119000 150000 207000 0.79
4.5000 9.0000 4.5625 3.3125 179000 26700 33700 46500
114.975 177.800 92.075 69.850 443000 0.52 1.31 1.95 65900 58300 115000 1.13
4.5266 7.0000 3.6250 2.7500 99600 14800 13100 25800
114.975 212.725 142.875 117.475 1100000 0.33 2.07 3.09 163000 91000 284000 1.79
4.5266 8.3750 5.6250 4.6250 246000 36700 20500 63900
115.087 190.500 106.362 80.962 586000 0.42 1.62 2.42 87300 62200 152000 1.40
4.5310 7.5000 4.1875 3.1875 132000 19600 14000 34200
119.062 194.873 125.255 131.351 662000 0.26 2.55 3.80 98600 44600 172000 2.21
4.6875 7.6722 4.9313 5.1713 149000 22200 10000 38600
119.062 195.262 136.779 142.875 662000 0.26 2.55 3.80 98600 44600 172000 2.21
4.6875 7.6875 5.3850 5.6250 149000 22200 10000 38600
119.957 194.873 125.255 131.351 662000 0.26 2.55 3.80 98600 44600 172000 2.21
4.7227 7.6722 4.9313 5.1713 149000 22200 10000 38600
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B274 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
71425 71751D X5S-71425
936 932CD X3S-936
HH224340 HH224310CD HH224340XA
37431 37626DC X1S-37431
37431 37626D X1S-37431
71432 71751D X1S-71432
H924043 H924010D H924043XA
LM522548 LM522510D LM522549XA
LM522549 LM522510D LM522549XB
64433 64700D X1S-64433
942 932CD X1S-64433
71437 71751D X2S-71437
H924045 H924010D H924045XB
HH924349 HH924310D HH924349XA
L623149 L623110D L623149XA
64450 64700DC X1S-64450
64450 64700D X5S-64450
71450 71751DC X3S-71450
71450 71751D X4S-71450
938 932CD X4S-938
HH224346 HH224310CD HH224346XB
HM926740 HM926710D HM926740XC
64452A 64700D X1S-64452
HH224349 HH224310CD HH224349XA
71453 71751D X2S-71453
HM124646 HM124616XD HM124646XC
HM124646 HM124618XD
HM124649 HM124616XD
3.5 126.0 1.5 181.0 269 45.7 0.1156 11.87
0.14 4.96 0.06 7.13
26.18
B
8.0 137.0 1.5 193.0 22.1 8.6 339 39.7 0.1153 21.49
0.31 5.39 0.06 7.60 0.87 0.34
47.37
8.0 139.0 1.5 201.5 25.4 7.9 367 47.8 0.1182 21.55
0.31 5.47 0.06 7.94 1.00 0.31
47.51
3.5 123.0 0.8 152.0 7.9 3.8 124 48.7 0.1443 3.13
0.14 4.84 0.03 5.98 0.31 0.15
6.91
3.5 123.0 0.8 152.0 124 48.7 0.1443 3.13
0.14 4.84 0.03 5.98
6.91
3.5 128.0 1.5 181.0 269 45.7 0.1156 12.02
0.14 5.04 0.06 7.13
26.50
Caption:
3.5 139.0 1.5 205.0 246 32.2 0.1299 17.81
0.14 5.47 0.06 8.07
39.27
8.0 133.0 0.8 154.0 232 63.3 0.1576 4.72
0.31 5.24 0.03 6.06
10.41
3.5 124.0 0.8 154.0 232 63.3 0.1576 4.87
0.14 4.88 0.03 6.06
10.73
3.5 128.0 0.8 172.0 219 45.3 0.1153 8.31
0.14 5.04 0.03 6.77
18.31
6.4 136.0 1.5 193.0 22.1 8.6 339 39.7 0.1153 21.09
0.25 5.35 0.06 7.60 0.87 0.34
46.50
3.5 129.0 1.5 181.0 269 45.7 0.1156 11.50
0.14 5.08 0.06 7.13
25.35
3.5 139.0 1.5 205.0 246 32.2 0.1299 17.78
0.14 5.47 0.06 8.07
39.20
6.4 157.0 1.5 226.0 306 37.3 0.1432 30.71
0.25 6.18 0.06 8.90
67.70
1.5 123.0 0.8 147.0 171 102 0.1422 2.16
0.06 4.84 0.03 5.79
4.75
3.5 131.0 0.8 172.0 17.3 5.3 219 45.3 0.1153 7.82
0.14 5.16 0.03 6.77 0.68 0.21
17.24
3.5 131.0 0.8 172.0 219 45.3 0.1153 7.81
0.14 5.16 0.03 6.77
17.21
3.5 132.0 1.5 181.0 17.3 5.3 269 45.7 0.1156 11.08
0.14 5.20 0.06 7.13 0.68 0.21
24.43
3.5 132.0 1.5 181.0 269 45.7 0.1156 11.08
0.14 5.20 0.06 7.13
24.43
7.0 141.0 1.5 193.0 22.1 8.6 339 39.7 0.1153 20.24
0.28 5.55 0.06 7.60 0.87 0.34
44.62
7.0 143.0 1.5 201.5 25.4 7.9 367 47.8 0.1182 20.38
0.28 5.63 0.06 7.94 1.00 0.31
44.92
3.5 146.0 2.3 219.0 295 39 0.1416 20.75
0.14 5.75 0.09 8.63
45.74
9.0 143.0 0.8 172.0 219 45.3 0.1153 7.54
0.35 5.63 0.03 6.77
16.62
7.0 144.0 1.5 201.5 25.4 7.9 367 47.8 0.1182 20.26
0.28 5.67 0.06 7.94 1.00 0.31
44.67
3.5 133.0 1.5 181.0 269 45.7 0.1156 10.91
0.14 5.24 0.06 7.13
24.04
1.5 131.0 1.0 183.0 340 69.2 0.1076 14.54
0.06 5.16 0.04 7.20
32.06
1.5 131.0 1.0 183.0 340 69.2 0.1076 15.17
0.06 5.16 0.04 7.20
33.44
3.0 134.0 1.0 183.0 340 69.2 0.1076 14.14
0.12 5.28 0.04 7.20
31.16
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B275
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
119.957 195.262 136.779 142.875 662000 0.26 2.55 3.80 98600 44600 172000 2.21
4.7227 7.6875 5.3850 5.6250 149000 22200 10000 38600
119.964 215.900 106.362 80.962 616000 0.49 1.38 2.06 91700 76500 160000 1.20
4.7230 8.5000 4.1875 3.1875 138000 20600 17200 35900
119.975 174.625 77.788 61.912 394000 0.33 2.03 3.02 58700 33400 102000 1.76
4.7234 6.8750 3.0625 2.4375 88600 13200 7510 23000
119.975 174.625 77.788 61.912 394000 0.33 2.03 3.02 58700 33400 102000 1.76
4.7234 6.8750 3.0625 2.4375 88600 13200 7510 23000
120.650 161.925 63.500 53.975 170000 0.43 1.55 2.31 25300 18800 44000 1.34
4.7500 6.3750 2.5000 2.1250 38200 5680 4230 9890
120.650 169.975 58.738 49.212 230000 0.33 2.03 3.02 34300 19500 59700 1.76
4.7500 6.6919 2.3125 1.9375 51700 7710 4390 13400
120.650 174.625 77.788 61.912 394000 0.33 2.03 3.02 58700 33400 102000 1.76
4.7500 6.8750 3.0625 2.4375 88600 13200 7510 23000
120.650 182.562 85.728 73.025 432000 0.31 2.21 3.29 64300 33600 112000 1.91
4.7500 7.1875 3.3751 2.8750 97100 14500 7550 25200
120.650 182.562 85.728 73.025 432000 0.31 2.21 3.29 64300 33600 112000 1.91
4.7500 7.1875 3.3751 2.8750 97100 14500 7550 25200
120.650 206.375 107.950 82.550 610000 0.46 1.47 2.19 90800 71300 158000 1.27
4.7500 8.1250 4.2500 3.2500 137000 20400 16000 35500
120.650 234.950 142.875 114.300 1010000 0.37 1.83 2.72 151000 95500 263000 1.58
4.7500 9.2500 5.6250 4.5000 228000 33900 21500 59100
123.825 182.562 85.728 73.025 432000 0.31 2.21 3.29 64300 33600 112000 1.91
4.8750 7.1875 3.3751 2.8750 97100 14500 7550 25200
123.825 182.562 85.728 73.025 432000 0.31 2.21 3.29 64300 33600 112000 1.91
4.8750 7.1875 3.3751 2.8750 97100 14500 7550 25200
124.943 234.950 142.875 114.300 1010000 0.37 1.83 2.72 151000 95500 263000 1.58
4.9190 9.2500 5.6250 4.5000 228000 33900 21500 59100
125.298 228.600 115.888 84.138 798000 0.74 0.92 1.36 119000 150000 207000 0.79
4.9330 9.0000 4.5625 3.3125 179000 26700 33700 46500
126.987 207.962 146.304 152.400 717000 0.26 2.55 3.80 107000 48400 186000 2.21
4.9995 8.1875 5.7600 6.0000 161000 24000 10900 41800
127.000 169.975 58.738 49.212 230000 0.33 2.03 3.02 34300 19500 59700 1.76
5.0000 6.6919 2.3125 1.9375 51700 7710 4390 13400
127.000 182.562 85.728 73.025 432000 0.31 2.21 3.29 64300 33600 112000 1.91
5.0000 7.1875 3.3751 2.8750 97100 14500 7550 25200
127.000 182.562 85.728 73.025 432000 0.31 2.21 3.29 64300 33600 112000 1.91
5.0000 7.1875 3.3751 2.8750 97100 14500 7550 25200
127.000 196.850 101.600 85.725 593000 0.34 1.96 2.92 88200 52000 154000 1.70
5.0000 7.7500 4.0000 3.3750 133000 19800 11700 34500
127.000 196.850 101.600 85.725 593000 0.34 1.96 2.92 88200 52000 154000 1.70
5.0000 7.7500 4.0000 3.3750 133000 19800 11700 34500
127.000 200.025 101.600 85.725 593000 0.34 1.96 2.92 88200 52000 154000 1.70
5.0000 7.8750 4.0000 3.3750 133000 19800 11700 34500
127.000 215.900 106.362 80.962 616000 0.49 1.38 2.06 91700 76500 160000 1.20
5.0000 8.5000 4.1875 3.1875 138000 20600 17200 35900
127.000 228.600 115.888 84.138 606000 0.74 0.92 1.36 90200 114000 157000 0.79
5.0000 9.0000 4.5625 3.3125 136000 20300 25600 35300
127.000 228.600 115.888 84.138 798000 0.74 0.92 1.36 119000 150000 207000 0.79
5.0000 9.0000 4.5625 3.3125 179000 26700 33700 46500
127.000 228.600 115.888 84.138 798000 0.74 0.92 1.36 119000 150000 207000 0.79
5.0000 9.0000 4.5625 3.3125 179000 26700 33700 46500
127.000 234.950 142.875 114.300 1010000 0.37 1.83 2.72 151000 95500 263000 1.58
5.0000 9.2500 5.6250 4.5000 228000 33900 21500 59100
127.792 228.600 115.888 84.138 798000 0.74 0.92 1.36 119000 150000 207000 0.79
5.0312 9.0000 4.5625 3.3125 179000 26700 33700 46500
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B276 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
HM124649 HM124618XD
74472 74851CD X1S-74472
M224748 M224710DC M224748XA
M224748 M224710D M224748XB
L624549 L624514D L624549XB
L225842 L225812D L225842XA
M224749 M224710D M224749XC
48282 48220DC X1S-48282
48282 48220D X1S-48282
795 792CD X4S-795
95475 95927CD X2S-95475
48286 48220DC X1S-48286
48286 48220D X2S-48286
95491 95927CD X2S-95491
HM926745 HM926710D HM926745XA
HM127440 HM127415XD
L225849 L225812D L225849XA
48290 48220DC X1S-48290
48290 48220D X2S-48290
67388 67322DC X1S-67388
67388 67322D X3S-67388
67388 67325D X1S-67388
74500 74851CD X2S-74500
97500 97901D X1S-97500
HM926747 HM926710DC HM926747XA
HM926747 HM926710D HM926747XC
95500 95927CD X8S-95500
HM926749 HM926710D HM926749XE
3.0 134.0 1.0 183.0 340 69.2 0.1076 15.00
0.12 5.28 0.04 7.20
33.06
B
3.5 142.0 1.5 208.0 19.0 7.1 363 68.5 0.1338 15.93
0.14 5.59 0.06 8.19 0.75 0.28
35.13
3.5 134.0 0.8 168.0 14.2 3.8 279 86.6 0.1575 5.72
0.14 5.28 0.03 6.61 0.56 0.15
12.62
3.5 134.0 0.8 168.0 279 86.6 0.1575 5.72
0.14 5.28 0.03 6.61
12.62
1.5 129.0 0.8 156.0 195 139 0.1509 3.22
0.06 5.08 0.03 6.14
7.11
1.5 131.0 1.0 164.0 253 134 0.1511 3.92
0.06 5.16 0.04 6.46
8.65
Caption:
3.5 135.0 0.8 168.0 279 86.6 0.1575 5.64
0.14 5.31 0.03 6.61
12.44
3.5 137.0 0.8 176.0 17.3 3.8 353 91.3 0.1138 7.88
0.14 5.39 0.03 6.93 0.68 0.15
17.38
3.5 137.0 0.8 176.0 353 91.3 0.1138 7.88
0.14 5.39 0.03 6.93
17.38
3.3 139.0 0.8 198.0 19.0 7.9 326 56.2 0.1269 13.68
0.13 5.47 0.03 7.80 0.75 0.31
30.17
6.4 149.0 1.5 217.0 22.1 8.6 454 59.3 0.1323 26.72
0.25 5.87 0.06 8.54 0.87 0.34
58.90
3.5 139.0 0.8 176.0 17.3 3.8 353 91.3 0.1138 7.59
0.14 5.47 0.03 6.93 0.68 0.15
16.73
3.5 139.0 0.8 176.0 353 91.3 0.1138 7.59
0.14 5.47 0.03 6.93
16.73
6.4 152.0 1.5 217.0 22.1 8.6 454 59.3 0.1323 25.64
0.25 5.98 0.06 8.54 0.87 0.34
56.53
3.5 154.0 2.3 219.0 295 39 0.1416 18.84
0.14 6.06 0.09 8.63
41.53
1.5 140.0 1.0 198.0 423 85.4 0.1156 17.67
0.06 5.51 0.04 7.79
38.95
1.5 136.0 1.0 164.0 253 106 0.1511 3.46
0.06 5.35 0.04 6.46
7.63
3.5 141.0 0.8 176.0 17.3 3.8 353 91.3 0.1138 7.12
0.14 5.55 0.03 6.93 0.68 0.15
15.70
3.5 141.0 0.8 176.0 353 91.3 0.1138 7.12
0.14 5.55 0.03 6.93
15.70
3.5 144.0 0.8 190.0 19.0 4.6 384 70.1 0.1220 10.65
0.14 5.67 0.03 7.48 0.75 0.18
23.48
3.5 144.0 0.8 190.0 384 70.1 0.1220 10.65
0.14 5.67 0.03 7.48
23.48
3.5 144.0 0.8 191.0 384 70.1 0.1220 11.72
0.14 5.67 0.03 7.52
25.83
3.5 148.0 1.5 208.0 19.0 7.1 363 68.5 0.1338 14.89
0.14 5.83 0.06 8.19 0.75 0.28
32.83
3.5 151.0 2.3 213.0 237 44.6 0.1311 17.45
0.14 5.94 0.09 8.38
38.47
3.5 156.0 2.3 219.0 19.0 8.6 295 39 0.1416 18.59
0.14 6.14 0.09 8.63 0.75 0.34
40.98
3.5 156.0 2.3 219.0 295 39 0.1416 18.59
0.14 6.14 0.09 8.63
40.98
6.4 154.0 1.5 217.0 22.1 8.6 454 53.8 0.1323 25.49
0.25 6.06 0.06 8.54 0.87 0.34
56.19
3.5 156.0 2.3 219.0 295 39 0.1416 18.47
0.14 6.14 0.09 8.63
40.72
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B277
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
128.588 206.375 107.950 82.550 610000 0.46 1.47 2.19 90800 71300 158000 1.27
5.0625 8.1250 4.2500 3.2500 137000 20400 16000 35500
129.967 229.873 150.002 160.000 816000 0.26 2.55 3.80 122000 55000 212000 2.21
5.1168 9.0501 5.9056 6.2992 183000 27300 12400 47600
129.967 229.873 150.043 160.000 914000 0.26 2.55 3.80 136000 61600 237000 2.21
5.1168 9.0501 5.9072 6.2992 206000 30600 13900 53300
129.967 229.873 150.043 160.000 816000 0.26 2.55 3.80 122000 55000 212000 2.21
5.1168 9.0501 5.9072 6.2992 183000 27300 12400 47600
129.975 234.950 142.875 114.300 1010000 0.37 1.83 2.72 151000 95500 263000 1.58
5.1171 9.2500 5.6250 4.5000 228000 33900 21500 59100
130.000 206.375 107.950 82.550 610000 0.46 1.47 2.19 90800 71300 158000 1.27
5.1181 8.1250 4.2500 3.2500 137000 20400 16000 35500
130.175 196.850 101.600 85.725 593000 0.34 1.96 2.92 88200 52000 154000 1.70
5.1250 7.7500 4.0000 3.3750 133000 19800 11700 34500
130.175 196.850 101.600 85.725 593000 0.34 1.96 2.92 88200 52000 154000 1.70
5.1250 7.7500 4.0000 3.3750 133000 19800 11700 34500
130.175 200.025 101.600 85.725 593000 0.34 1.96 2.92 88200 52000 154000 1.70
5.1250 7.8750 4.0000 3.3750 133000 19800 11700 34500
130.175 206.375 107.950 82.550 610000 0.46 1.47 2.19 90800 71300 158000 1.27
5.1250 8.1250 4.2500 3.2500 137000 20400 16000 35500
131.750 207.962 146.304 152.400 717000 0.26 2.55 3.80 107000 48400 186000 2.21
5.1870 8.1875 5.7600 6.0000 161000 24000 10900 41800
133.350 177.008 57.150 47.625 237000 0.35 1.94 2.89 35300 21000 61500 1.68
5.2500 6.9688 2.2500 1.8750 53300 7940 4730 13800
133.350 190.500 85.725 73.025 456000 0.32 2.10 3.13 67900 37300 118000 1.82
5.2500 7.5000 3.3750 2.8750 103000 15300 8390 26600
133.350 190.500 85.725 73.025 456000 0.32 2.10 3.13 67900 37300 118000 1.82
5.2500 7.5000 3.3750 2.8750 103000 15300 8390 26600
133.350 196.850 101.600 85.725 593000 0.34 1.96 2.92 88200 52000 154000 1.70
5.2500 7.7500 4.0000 3.3750 133000 19800 11700 34500
133.350 196.850 101.600 85.725 593000 0.34 1.96 2.92 88200 52000 154000 1.70
5.2500 7.7500 4.0000 3.3750 133000 19800 11700 34500
133.350 196.850 101.600 85.725 593000 0.34 1.96 2.92 88200 52000 154000 1.70
5.2500 7.7500 4.0000 3.3750 133000 19800 11700 34500
133.350 200.025 101.600 85.725 593000 0.34 1.96 2.92 88200 52000 154000 1.70
5.2500 7.8750 4.0000 3.3750 133000 19800 11700 34500
133.350 215.900 106.362 80.962 616000 0.49 1.38 2.06 91700 76500 160000 1.20
5.2500 8.5000 4.1875 3.1875 138000 20600 17200 35900
133.350 234.950 142.875 114.300 1010000 0.37 1.83 2.72 151000 95500 263000 1.58
5.2500 9.2500 5.6250 4.5000 228000 33900 21500 59100
133.350 234.950 142.875 114.300 1010000 0.37 1.83 2.72 151000 95500 263000 1.58
5.2500 9.2500 5.6250 4.5000 228000 33900 21500 59100
136.525 190.500 85.725 73.025 456000 0.32 2.10 3.13 67900 37300 118000 1.82
5.3750 7.5000 3.3750 2.8750 103000 15300 8390 26600
136.525 190.500 85.725 73.025 456000 0.32 2.10 3.13 67900 37300 118000 1.82
5.3750 7.5000 3.3750 2.8750 103000 15300 8390 26600
136.525 215.900 106.362 80.962 616000 0.49 1.38 2.06 91700 76500 160000 1.20
5.3750 8.5000 4.1875 3.1875 138000 20600 17200 35900
136.525 228.600 123.825 98.425 839000 0.42 1.60 2.39 125000 90000 218000 1.39
5.3750 9.0000 4.8750 3.8750 189000 28100 20200 48900
136.525 254.000 149.225 111.125 1060000 0.41 1.66 2.47 158000 110000 276000 1.43
5.3750 10.0000 5.8750 4.3750 239000 35600 24800 62000
136.525 254.000 152.400 114.300 1060000 0.41 1.66 2.47 158000 110000 276000 1.43
5.3750 10.0000 6.0000 4.5000 239000 35600 24800 62000
139.700 215.900 106.362 80.962 616000 0.49 1.38 2.06 91700 76500 160000 1.20
5.5000 8.5000 4.1875 3.1875 138000 20600 17200 35900
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B278 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
799 792CD X1S-799
H127747 H127715D
H127746 H127715AD
H127747 H127715AD
95512 95927CD X1S-95512
797 792CD X3S-797
67389 67322DC X1S-67389
67389 67322D X3S-67389
67389 67325D X1S-67389
799A 792CD X1S-799A
HM127446 HM127415XD
L327249 L327210D L327249XB
48385 48320DC X1S-48385
48385 48320D X2S-48385
67390 67322DC X1S-67390
67390 67322D X2S-67390
67391 67322D X1S-67390
67390 67325D X2S-67390
74525 74851CD X4S-74525
95525 95927CD X3S-95525
95528 95927CD X1S-95525
48393 48320DC X1S-48393
48393 48320D X2S-48393
74537 74851CD X1S-74537
896 892CD X2S-896
99537 99102CD X1S-99537
99537 99101D X2S-99537
74550 74851CD X3S-74550
3.3 146.0 0.8 198.0 19.0 7.9 326 61.9 0.1269 12.42
0.13 5.75 0.03 7.80 0.75 0.31
27.39
B
1.5 145.0 1.0 0.0 419 95.3 0.1151 26.62
0.06 5.71 0.04 0.00
58.69
1.5 145.0 10.0 0.0 470 106 0.1198 26.51
0.06 5.71 0.00 0.00
58.44
1.5 145.0 10.0 0.0 419 95.3 0.1151 26.02
0.06 5.71 0.00 0.00
57.37
6.4 157.0 1.5 217.0 22.1 8.6 454 59.3 0.1323 24.71
0.25 6.18 0.06 8.54 0.87 0.34
54.47
3.5 148.0 0.8 198.0 19.0 7.9 326 61.9 0.1269 12.12
0.14 5.83 0.03 7.80 0.75 0.31
26.72
Caption:
3.5 146.0 0.8 190.0 19.0 4.6 384 70.1 0.1220 10.16
0.14 5.75 0.03 7.48 0.75 0.18
22.39
3.5 146.0 0.8 190.0 384 70.1 0.1220 10.16
0.14 5.75 0.03 7.48
22.39
3.5 146.0 0.8 191.0 384 70.1 0.1220 11.23
0.14 5.75 0.03 7.52
24.75
3.5 148.0 0.8 198.0 19.0 7.9 326 61.9 0.1269 12.15
0.14 5.83 0.03 7.80 0.75 0.31
26.78
1.5 144.0 1.0 198.0 423 85.4 0.1156 16.80
0.06 5.67 0.04 7.79
37.04
1.5 142.0 0.8 171.0 280 156 0.1585 3.66
0.06 5.59 0.03 6.73
8.06
3.5 148.0 0.8 184.0 17.3 3.8 404 95.6 0.1209 7.46
0.14 5.83 0.03 7.24 0.68 0.15
16.44
3.5 148.0 0.8 184.0 404 95.6 0.1209 7.46
0.14 5.83 0.03 7.24
16.44
3.5 149.0 0.8 190.0 19.0 4.6 384 70.1 0.1220 9.66
0.14 5.87 0.03 7.48 0.75 0.18
21.29
3.5 149.0 0.8 190.0 384 70.1 0.1220 9.66
0.14 5.87 0.03 7.48
21.29
8.0 157.0 0.8 190.0 384 70.1 0.1220 9.63
0.31 6.18 0.03 7.48
21.23
3.5 149.0 0.8 191.0 384 70.1 0.1220 10.72
0.14 5.87 0.03 7.52
23.64
3.5 152.0 1.5 208.0 19.0 7.1 363 63.3 0.1338 13.91
0.14 5.98 0.06 8.19 0.75 0.28
30.67
9.7 166.0 1.5 217.0 22.1 8.6 454 53.8 0.1323 23.61
0.38 6.54 0.06 8.54 0.87 0.34
52.05
4.8 157.0 1.5 217.0 22.1 8.6 454 59.3 0.1323 23.85
0.19 6.18 0.06 8.54 0.87 0.34
52.58
3.5 151.0 0.8 184.0 17.3 3.8 404 95.6 0.1209 7.01
0.14 5.94 0.03 7.24 0.68 0.15
15.45
3.5 151.0 0.8 184.0 404 95.6 0.1209 7.01
0.14 5.94 0.03 7.24
15.45
3.5 155.0 1.5 208.0 19.0 7.1 363 68.5 0.1338 13.28
0.14 6.10 0.06 8.19 0.75 0.28
29.27
3.5 156.0 1.5 216.0 22.1 7.1 430 78.2 0.1355 18.81
0.14 6.14 0.06 8.50 0.87 0.28
41.47
7.0 167.0 1.5 238.0 22.1 7.9 556 73.5 0.1459 30.70
0.28 6.57 0.06 9.37 0.87 0.31
67.67
7.0 167.0 1.5 238.0 556 73.5 0.1459 32.18
0.28 6.57 0.06 9.37
70.95
3.5 158.0 1.5 208.0 19.0 7.1 363 63.3 0.1338 12.81
0.14 6.22 0.06 8.19 0.75 0.28
28.24
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B279
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
139.700 215.900 106.362 80.962 616000 0.49 1.38 2.06 91700 76500 160000 1.20
5.5000 8.5000 4.1875 3.1875 138000 20600 17200 35900
139.700 222.250 75.700 53.975 398000 0.44 1.54 2.30 59300 44400 103000 1.34
5.5000 8.7500 2.9803 2.1250 89500 13300 9970 23200
139.700 228.600 123.825 98.425 839000 0.42 1.60 2.39 125000 90000 218000 1.39
5.5000 9.0000 4.8750 3.8750 189000 28100 20200 48900
139.700 228.600 123.825 98.425 839000 0.42 1.60 2.39 125000 90000 218000 1.39
5.5000 9.0000 4.8750 3.8750 189000 28100 20200 48900
139.700 236.538 131.762 106.362 962000 0.32 2.12 3.15 143000 78200 249000 1.83
5.5000 9.3125 5.1875 4.1875 216000 32200 17600 56100
139.700 241.300 131.762 106.362 962000 0.32 2.12 3.15 143000 78200 249000 1.83
5.5000 9.5000 5.1875 4.1875 216000 32200 17600 56100
139.700 254.000 149.225 111.125 1060000 0.41 1.66 2.47 158000 110000 276000 1.43
5.5000 10.0000 5.8750 4.3750 239000 35600 24800 62000
139.700 254.000 152.400 114.300 1060000 0.41 1.66 2.47 158000 110000 276000 1.43
5.5000 10.0000 6.0000 4.5000 239000 35600 24800 62000
139.700 307.975 200.025 155.575 1970000 0.33 2.07 3.08 293000 164000 510000 1.79
5.5000 12.1250 7.8750 6.1250 442000 65900 36800 115000
139.700 307.975 200.025 155.575 1970000 0.33 2.07 3.08 293000 164000 510000 1.79
5.5000 12.1250 7.8750 6.1250 442000 65900 36800 115000
142.875 193.675 65.085 53.975 317000 0.37 1.83 2.73 47100 29700 82100 1.59
5.6250 7.6250 2.5624 2.1250 71200 10600 6690 18500
142.875 200.025 87.315 73.025 462000 0.34 2.01 2.99 68800 39600 120000 1.74
5.6250 7.8750 3.4376 2.8750 104000 15500 8900 26900
142.875 200.025 87.315 73.025 462000 0.34 2.01 2.99 68800 39600 120000 1.74
5.6250 7.8750 3.4376 2.8750 104000 15500 8900 26900
142.875 200.025 87.315 73.025 462000 0.34 2.01 2.99 68800 39600 120000 1.74
5.6250 7.8750 3.4376 2.8750 104000 15500 8900 26900
142.875 222.250 75.700 53.975 398000 0.44 1.54 2.30 59300 44400 103000 1.34
5.6250 8.7500 2.9803 2.1250 89500 13300 9970 23200
142.875 241.300 131.762 106.362 962000 0.32 2.12 3.15 143000 78200 249000 1.83
5.6250 9.5000 5.1875 4.1875 216000 32200 17600 56100
144.450 220.662 155.839 163.510 751000 0.26 2.55 3.80 112000 50600 195000 2.21
5.6870 8.6875 6.1354 6.4374 169000 25100 11400 43800
146.050 193.675 65.085 53.975 317000 0.37 1.83 2.73 47100 29700 82100 1.59
5.7500 7.6250 2.5624 2.1250 71200 10600 6690 18500
146.050 193.675 65.085 53.975 317000 0.37 1.83 2.73 47100 29700 82100 1.59
5.7500 7.6250 2.5624 2.1250 71200 10600 6690 18500
146.050 236.538 131.762 106.362 962000 0.32 2.12 3.15 143000 78200 249000 1.83
5.7500 9.3125 5.1875 4.1875 216000 32200 17600 56100
146.050 241.300 131.762 106.362 830000 0.44 1.53 2.27 124000 93600 215000 1.32
5.7500 9.5000 5.1875 4.1875 187000 27800 21000 48400
146.050 241.300 131.762 106.362 962000 0.32 2.12 3.15 143000 78200 249000 1.83
5.7500 9.5000 5.1875 4.1875 216000 32200 17600 56100
146.050 244.475 107.950 79.375 648000 0.35 1.92 2.86 96400 58100 168000 1.66
5.7500 9.6250 4.2500 3.1250 146000 21700 13100 37700
146.050 254.000 149.225 111.125 1060000 0.41 1.66 2.47 158000 110000 276000 1.43
5.7500 10.0000 5.8750 4.3750 239000 35600 24800 62000
146.050 254.000 152.400 114.300 1060000 0.41 1.66 2.47 158000 110000 276000 1.43
5.7500 10.0000 6.0000 4.5000 239000 35600 24800 62000
146.050 268.288 160.338 125.412 1260000 0.39 1.74 2.59 188000 125000 328000 1.51
5.7500 10.5625 6.3125 4.9375 284000 42300 28100 73700
146.050 304.800 135.733 97.633 1250000 0.33 2.03 3.02 186000 106000 324000 1.76
5.7500 12.0000 5.3438 3.8438 281000 41800 23800 72800
149.225 236.538 131.762 106.362 962000 0.32 2.12 3.15 143000 78200 249000 1.83
5.8750 9.3125 5.1875 4.1875 216000 32200 17600 56100
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B280 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
74550A 74851CD X1S-74550
73551 73876CD X2S-73551
898 892CD X5S-898
898A 892CD X4S-898
HM231132 HM231111CD HM231132XA
HM231132 HM231116D
99550 99102CD X5S-99550
99550 99101D X8S-99550
HH234031 HH234011CD HH234032XB
HH234032 HH234011CD HH234032XC
36686 36620D X1S-48685
48684 48620D X1S-48685
48685 48620DC X1S-48685
48685 48620D X4S-48685
73562 73876CD X2S-73562
HM231136 HM231116D HM231136XA
HM129848 HM129814XD
36690 36620DC X1S-36690
36690 36620D X2S-36690
HM231140 HM231111CD HM231140XE
82576 82951CD X1S-82576
HM231140 HM231116D HM231140XA
81575 81963CD X1S-81575
99575 99102CD X4S-99575
99575 99101D X5S-99575
EE107057 107105CD X4S-107057
EE750576 751204D X3S-750576
HM231148 HM231111CD HM231149XB
6.4 166.0 1.5 208.0 19.0 7.1 363 63.3 0.1338 12.79
0.25 6.54 0.06 8.19 0.75 0.28
28.19
B
3.5 156.0 2.3 207.0 10.9 6.4 244 82 0.1122 9.36
0.14 6.14 0.09 8.15 0.43 0.25
20.64
3.5 160.0 1.5 216.0 22.1 7.1 430 78.2 0.1355 18.09
0.14 6.30 0.06 8.50 0.87 0.28
39.89
6.4 165.0 1.5 216.0 22.1 7.1 430 78.2 0.1355 17.99
0.25 6.50 0.06 8.50 0.87 0.28
39.67
3.5 160.0 1.5 224.0 22.1 7.9 533 85.9 0.1327 21.68
0.14 6.30 0.06 8.82 0.87 0.31
47.79
3.5 160.0 1.5 224.0 533 85.9 0.1327 22.53
0.14 6.30 0.06 8.82
49.68
Caption:
7.0 170.0 1.5 238.0 22.1 7.9 556 73.5 0.1459 30.10
0.28 6.69 0.06 9.37 0.87 0.31
66.35
7.0 170.0 1.5 238.0 556 73.5 0.1459 31.24
0.28 6.69 0.06 9.37
68.86
9.7 180.0 2.3 285.5 28.4 10.2 718 62.1 0.1157 65.45
0.38 7.09 0.09 11.24 1.12 0.40 144.29
9.7 180.0 2.3 285.5 28.4 10.2 718 62.1 0.1157 62.85
0.38 7.09 0.09 11.24 1.12 0.40 138.55
1.5 153.0 0.8 188.0 366 152 0.1768 5.27
0.06 6.02 0.03 7.40
11.62
8.0 166.0 0.8 193.0 440 115 0.1261 7.76
0.31 6.54 0.03 7.60
17.10
3.5 158.0 0.8 193.0 17.3 4.6 440 115 0.1261 7.94
0.14 6.22 0.03 7.60 0.68 0.18
17.51
3.5 158.0 0.8 193.0 440 115 0.1261 7.94
0.14 6.22 0.03 7.60
17.51
3.5 159.0 2.3 207.0 10.9 6.4 244 82 0.1122 8.95
0.14 6.26 0.09 8.15 0.43 0.25
19.74
3.5 162.0 1.5 224.0 533 85.9 0.1327 22.53
0.14 6.38 0.06 8.82
49.66
1.5 156.0 1.0 211.0 494 101 0.1215 19.07
0.06 6.14 0.04 8.30
42.03
1.5 155.0 0.8 188.0 10.9 3.8 366 121 0.1768 4.94
0.06 6.10 0.03 7.40 0.43 0.15
10.88
1.5 155.0 0.8 188.0 366 121 0.1768 4.93
0.06 6.10 0.03 7.40
10.87
3.5 164.0 1.5 224.0 22.1 7.9 533 85.9 0.1327 20.26
0.14 6.46 0.06 8.82 0.87 0.31
44.66
3.5 166.0 1.5 226.0 22.1 8.6 460 81.1 0.1405 21.82
0.14 6.54 0.06 8.90 0.87 0.34
48.11
3.5 164.0 1.5 224.0 533 85.9 0.1327 21.83
0.14 6.46 0.06 8.82
48.12
3.5 166.0 1.5 229.0 19.0 7.9 413 98.4 0.1250 17.51
0.14 6.54 0.06 9.02 0.75 0.31
38.61
7.0 175.0 1.5 238.0 22.1 7.9 556 73.5 0.1459 28.51
0.28 6.89 0.06 9.37 0.87 0.31
62.84
7.0 175.0 1.5 238.0 556 73.5 0.1459 29.64
0.28 6.89 0.06 9.37
65.35
6.4 176.0 1.5 249.5 28.4 10.2 606 76.3 0.1163 36.36
0.25 6.93 0.06 9.82 1.12 0.40
80.17
3.3 167.0 1.5 268.0 431 54.4 0.0974 38.56
0.13 6.57 0.06 10.55
85.01
6.4 172.0 1.5 224.0 22.1 7.9 533 85.9 0.1327 19.50
0.25 6.77 0.06 8.82 0.87 0.31
42.99
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B281
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
149.225 236.538 131.762 106.362 962000 0.32 2.12 3.15 143000 78200 249000 1.83
5.8750 9.3125 5.1875 4.1875 216000 32200 17600 56100
149.225 241.300 131.762 106.362 962000 0.32 2.12 3.15 143000 78200 249000 1.83
5.8750 9.5000 5.1875 4.1875 216000 32200 17600 56100
149.225 254.000 149.225 111.125 1060000 0.41 1.66 2.47 158000 110000 276000 1.43
5.8750 10.0000 5.8750 4.3750 239000 35600 24800 62000
149.225 254.000 152.400 114.300 1060000 0.41 1.66 2.47 158000 110000 276000 1.43
5.8750 10.0000 6.0000 4.5000 239000 35600 24800 62000
149.967 249.872 153.764 160.000 1020000 0.26 2.55 3.80 152000 69100 266000 2.21
5.9042 9.8375 6.0537 6.2992 230000 34300 15500 59700
150.000 244.475 107.950 79.375 648000 0.35 1.92 2.86 96400 58100 168000 1.66
5.9055 9.6250 4.2500 3.1250 146000 21700 13100 37700
150.812 244.475 107.950 79.375 648000 0.35 1.92 2.86 96400 58100 168000 1.66
5.9375 9.6250 4.2500 3.1250 146000 21700 13100 37700
152.400 203.200 92.075 79.375 457000 0.35 1.94 2.89 68000 40400 118000 1.68
6.0000 8.0000 3.6250 3.1250 103000 15300 9090 26600
152.400 244.475 107.950 79.375 648000 0.35 1.92 2.86 96400 58100 168000 1.66
6.0000 9.6250 4.2500 3.1250 146000 21700 13100 37700
152.400 254.000 149.225 111.125 1060000 0.41 1.66 2.47 158000 110000 276000 1.43
6.0000 10.0000 5.8750 4.3750 239000 35600 24800 62000
152.400 254.000 152.400 114.300 1060000 0.41 1.66 2.47 158000 110000 276000 1.43
6.0000 10.0000 6.0000 4.5000 239000 35600 24800 62000
152.400 268.288 160.338 125.412 1260000 0.39 1.74 2.59 188000 125000 328000 1.51
6.0000 10.5625 6.3125 4.9375 284000 42300 28100 73700
152.400 307.975 200.025 146.050 1700000 0.33 2.07 3.08 253000 141000 440000 1.79
6.0000 12.1250 7.8750 5.7500 382000 56800 31700 98900
152.400 307.975 200.025 155.575 1970000 0.33 2.07 3.08 293000 164000 510000 1.79
6.0000 12.1250 7.8750 6.1250 442000 65900 36800 115000
152.400 307.975 200.025 155.575 1970000 0.33 2.07 3.08 293000 164000 510000 1.79
6.0000 12.1250 7.8750 6.1250 442000 65900 36800 115000
158.750 225.425 85.725 69.850 489000 0.38 1.76 2.62 72800 47800 127000 1.52
6.2500 8.8750 3.3750 2.7500 110000 16400 10700 28500
159.951 244.475 107.950 79.375 648000 0.35 1.92 2.86 96400 58100 168000 1.66
6.2973 9.6250 4.2500 3.1250 146000 21700 13100 37700
159.951 244.475 107.950 79.375 648000 0.35 1.92 2.86 96400 58100 168000 1.66
6.2973 9.6250 4.2500 3.1250 146000 21700 13100 37700
160.325 288.925 142.875 111.125 1330000 0.32 2.12 3.15 198000 108000 344000 1.83
6.3120 11.3750 5.6250 4.3750 299000 44500 24300 77400
165.087 276.225 181.023 185.725 1180000 0.26 2.55 3.80 175000 79300 305000 2.21
6.4995 10.8750 7.1269 7.3120 265000 39400 17800 68600
165.100 215.900 58.740 47.625 288000 0.36 1.85 2.76 42900 26800 74700 1.60
6.5000 8.5000 2.3126 1.8750 64800 9640 6010 16800
165.100 225.425 85.725 69.850 489000 0.38 1.76 2.62 72800 47800 127000 1.52
6.5000 8.8750 3.3750 2.7500 110000 16400 10700 28500
165.100 247.650 103.188 84.138 653000 0.44 1.54 2.29 97200 73200 169000 1.33
6.5000 9.7500 4.0625 3.3125 147000 21900 16500 38100
165.100 288.925 142.875 111.125 1060000 0.47 1.44 2.15 159000 127000 276000 1.25
6.5000 11.3750 5.6250 4.3750 239000 35600 28600 62000
165.100 288.925 142.875 111.125 1330000 0.32 2.12 3.15 198000 108000 344000 1.83
6.5000 11.3750 5.6250 4.3750 299000 44500 24300 77400
165.100 288.925 142.875 111.125 1330000 0.32 2.12 3.15 198000 108000 344000 1.83
6.5000 11.3750 5.6250 4.3750 299000 44500 24300 77400
165.100 298.450 142.875 111.125 1060000 0.47 1.44 2.15 159000 127000 276000 1.25
6.5000 11.7500 5.6250 4.3750 239000 35600 28600 62000
166.687 225.425 85.725 69.850 489000 0.38 1.76 2.62 72800 47800 127000 1.52
6.5625 8.8750 3.3750 2.7500 110000 16400 10700 28500
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B282 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
HM231149 HM231111CD HM231149XB
HM231149 HM231116D HM231149XA
99587 99102CD X3S-99587
99587 99101D
HM133436 HM133413XD
81590 81963CD X1S-81590
81593 81963CD X1S-81593
LM330448 LM330410D LM330448XA
81600 81963CD X4S-81600
99600 99102CD X7S-99600
99600 99101D X4S-99600
EE107060 107105CD X3S-107060
EE450601 451215CD X7S-450601
HH234048 HH234011CD HH234048XA
HH234049 HH234011CD HH234049XA
46780 46720CD X2S-46780
81629 81963CD
81630 81963CD X1S-81630
HM237532 HM237510CD HM237532XC
HM136940 HM136916XD
L433749 L433710D L433749XA
46790 46720CD X2S-46790
67780 67720CD X2S-67780
94649 94114CD X5S-94650
HM237535 HM237510CD HM237535XC
HM237536 HM237510CD HM237535XB
94649 94118D X3S-94650
46792 46720CD X2S-46792
3.5 167.0 1.5 224.0 22.1 7.9 533 85.9 0.1327 19.61
0.14 6.57 0.06 8.82 0.87 0.31
43.22
B
3.5 167.0 1.5 224.0 533 85.9 0.1327 21.17
0.14 6.57 0.06 8.82
46.68
7.0 178.0 1.5 238.0 22.1 7.9 556 73.5 0.1459 27.83
0.28 7.01 0.06 9.37 0.87 0.31
61.35
7.0 178.0 1.5 238.0 556 73.5 0.1459 28.18
0.28 7.01 0.06 9.37
62.11
3.0 169.0 1.0 239.0 669 103 0.1344 30.05
0.12 6.65 0.04 9.41
66.24
3.5 169.0 1.5 229.0 19.0 7.9 413 98.4 0.1250 16.87
0.14 6.65 0.06 9.02 0.75 0.31
37.20
Caption:
3.5 169.0 1.5 229.0 19.0 7.9 413 98.4 0.1250 16.69
0.14 6.65 0.06 9.02 0.75 0.31
36.78
3.3 166.0 0.8 197.0 456 135 0.1289 7.60
0.13 6.54 0.03 7.76
16.75
3.5 171.0 1.5 229.0 19.0 7.9 413 98.4 0.1250 16.88
0.14 6.73 0.06 9.02 0.75 0.31
37.21
7.0 181.0 1.5 238.0 22.1 7.9 556 66.7 0.1459 26.93
0.28 7.13 0.06 9.37 0.87 0.31
59.37
7.0 181.0 1.5 238.0 556 66.7 0.1459 28.13
0.28 7.13 0.06 9.37
62.02
6.4 181.0 1.5 249.5 28.4 10.2 606 76.3 0.1163 34.63
0.25 7.13 0.06 9.82 1.12 0.40
76.35
9.7 189.0 2.3 275.0 28.4 11.7 747 76.3 0.1176 59.88
0.38 7.44 0.09 10.82 1.12 0.46 132.01
9.7 191.0 2.3 285.5 28.4 10.2 718 62.1 0.1157 60.93
0.38 7.52 0.09 11.24 1.12 0.40 134.32
9.7 191.0 2.3 285.5 28.4 10.2 718 62.1 0.1157 58.33
0.38 7.52 0.09 11.24 1.12 0.40 128.58
3.5 176.0 0.8 218.0 15.7 5.3 572 133 0.1432 10.71
0.14 6.93 0.03 8.58 0.62 0.21
23.60
3.5 176.0 1.5 229.0 19.0 7.9 413 98.4 0.1250 14.91
0.14 6.93 0.06 9.02 0.75 0.31
32.87
3.5 176.0 1.5 229.0 19.0 7.9 413 98.4 0.1250 15.09
0.14 6.93 0.06 9.02 0.75 0.31
33.27
7.0 192.0 1.5 271.5 22.1 8.6 751 101 0.1168 36.92
0.28 7.56 0.06 10.68 0.87 0.34
81.40
1.5 183.0 1.0 261.5 828 112 0.1135 40.98
0.06 7.20 0.04 10.30
90.35
1.5 174.0 0.8 209.0 365 168 0.1748 5.11
0.06 6.85 0.03 8.23
11.27
3.5 181.0 0.8 218.0 15.7 5.3 572 175 0.1432 9.69
0.14 7.13 0.03 8.58 0.62 0.21
21.36
3.5 185.0 0.8 240.0 19.0 7.1 622 122 0.1214 17.18
0.14 7.28 0.03 9.45 0.75 0.28
37.87
7.0 197.0 1.5 272.0 22.1 10.2 692 93.8 0.1287 36.66
0.28 7.76 0.06 10.71 0.87 0.40
80.81
7.0 195.0 1.5 271.5 22.1 8.6 751 101 0.1168 35.86
0.28 7.68 0.06 10.68 0.87 0.34
79.05
7.0 195.0 1.5 271.5 22.1 8.6 751 101 0.1168 35.83
0.28 7.68 0.06 10.68 0.87 0.34
78.98
7.0 197.0 1.5 272.0 692 93.8 0.1287 41.10
0.28 7.76 0.06 10.71
90.61
3.5 182.0 0.8 218.0 15.7 5.3 572 154 0.1432 9.39
0.14 7.17 0.03 8.58 0.62 0.21
20.69
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B283
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
168.275 247.650 103.188 84.138 653000 0.44 1.54 2.29 97200 73200 169000 1.33
6.6250 9.7500 4.0625 3.3125 147000 21900 16500 38100
170.000 254.000 101.600 76.200 763000 0.32 2.12 3.15 114000 62000 198000 1.83
6.6929 10.0000 4.0000 3.0000 172000 25500 13900 44500
174.625 247.650 103.188 84.138 653000 0.44 1.54 2.29 97200 73200 169000 1.33
6.8750 9.7500 4.0625 3.3125 147000 21900 16500 38100
174.625 247.650 103.188 84.138 653000 0.44 1.54 2.29 97200 73200 169000 1.33
6.8750 9.7500 4.0625 3.3125 147000 21900 16500 38100
174.625 288.925 142.875 111.125 1060000 0.47 1.44 2.15 159000 127000 276000 1.25
6.8750 11.3750 5.6250 4.3750 239000 35600 28600 62000
174.625 288.925 142.875 111.125 1330000 0.32 2.12 3.15 198000 108000 344000 1.83
6.8750 11.3750 5.6250 4.3750 299000 44500 24300 77400
177.787 276.225 181.023 185.725 1180000 0.26 2.55 3.80 175000 79300 305000 2.21
6.9995 10.8750 7.1269 7.3120 265000 39400 17800 68600
177.800 227.012 66.672 52.388 337000 0.44 1.53 2.28 50200 37900 87400 1.33
7.0000 8.9375 2.6249 2.0625 75800 11300 8510 19600
177.800 247.650 103.188 84.138 653000 0.44 1.54 2.29 97200 73200 169000 1.33
7.0000 9.7500 4.0625 3.3125 147000 21900 16500 38100
177.800 288.925 142.875 111.125 1060000 0.47 1.44 2.15 159000 127000 276000 1.25
7.0000 11.3750 5.6250 4.3750 239000 35600 28600 62000
177.800 288.925 142.875 111.125 1330000 0.32 2.12 3.15 198000 108000 344000 1.83
7.0000 11.3750 5.6250 4.3750 299000 44500 24300 77400
177.800 298.450 142.875 111.125 1060000 0.47 1.44 2.15 159000 127000 276000 1.25
7.0000 11.7500 5.6250 4.3750 239000 35600 28600 62000
177.800 320.675 185.738 138.112 1790000 0.32 2.12 3.15 267000 145000 464000 1.83
7.0000 12.6250 7.3125 5.4375 402000 59900 32700 104000
179.975 317.500 146.050 111.125 1180000 0.52 1.29 1.92 175000 157000 306000 1.12
7.0856 12.5000 5.7500 4.3750 265000 39500 35300 68700
184.150 266.700 103.188 84.138 671000 0.48 1.41 2.11 99900 81700 174000 1.22
7.2500 10.5000 4.0625 3.3125 151000 22500 18400 39100
187.325 266.700 103.188 84.138 671000 0.48 1.41 2.11 99900 81700 174000 1.22
7.3750 10.5000 4.0625 3.3125 151000 22500 18400 39100
187.325 269.875 119.062 93.663 884000 0.33 2.03 3.02 132000 74900 229000 1.76
7.3750 10.6250 4.6875 3.6875 199000 29600 16800 51500
187.325 282.575 107.950 79.375 692000 0.42 1.62 2.42 103000 73300 180000 1.41
7.3750 11.1250 4.2500 3.1250 156000 23200 16500 40400
187.325 320.675 185.738 138.112 1790000 0.32 2.12 3.15 267000 145000 464000 1.83
7.3750 12.6250 7.3125 5.4375 402000 59900 32700 104000
190.500 266.700 103.188 84.138 671000 0.48 1.41 2.11 99900 81700 174000 1.22
7.5000 10.5000 4.0625 3.3125 151000 22500 18400 39100
190.500 282.575 107.950 79.375 692000 0.42 1.62 2.42 103000 73300 180000 1.41
7.5000 11.1250 4.2500 3.1250 156000 23200 16500 40400
190.500 282.575 107.950 79.375 692000 0.42 1.62 2.42 103000 73300 180000 1.41
7.5000 11.1250 4.2500 3.1250 156000 23200 16500 40400
190.500 317.500 146.050 111.125 1180000 0.52 1.29 1.92 175000 157000 306000 1.12
7.5000 12.5000 5.7500 4.3750 265000 39500 35300 68700
190.500 368.300 193.675 136.525 1880000 0.40 1.68 2.50 280000 193000 488000 1.45
7.5000 14.5000 7.6250 5.3750 423000 63000 43300 110000
192.088 266.700 103.188 84.138 671000 0.48 1.41 2.11 99900 81700 174000 1.22
7.5625 10.5000 4.0625 3.3125 151000 22500 18400 39100
193.675 282.575 107.950 79.375 692000 0.42 1.62 2.42 103000 73300 180000 1.41
7.6250 11.1250 4.2500 3.1250 156000 23200 16500 40400
193.675 282.575 107.950 79.375 692000 0.42 1.62 2.42 103000 73300 180000 1.41
7.6250 11.1250 4.2500 3.1250 156000 23200 16500 40400
196.850 254.000 61.910 47.625 340000 0.40 1.70 2.53 50600 34400 88100 1.47
7.7500 10.0000 2.4374 1.8750 76400 11400 7730 19800
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B284 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
67782 67720CD X1S-67782
M235149 M235113CD M235149XB
67786 67720CD X1S-67787
67787 67720CD X2S-67787
94687 94114CD X1S-94687
HM237542 HM237510CD HM237542XB
HM136948 HM136916XD
36990 36920CD X2S-36990
67790 67720CD X2S-67790
94700 94114CD X6S-94700
HM237545 HM237510CD HM237545XC
94700 94118D X6S-94700
H239640 H239612CD H239640XB
93708 93127CD X1S-93708
67883 67820CD X2S-67883
67884 67820CD X3S-67884
M238849 M238810CD M238849XB
87737 87112D X1S-87737
H239649 H239612CD H239649XB
67885 67820CD X2S-67885
87750 87112DC X1S-87750
87750 87112D X1S-87750
93750 93127CD X4S-93750
EE420751 421451CD X2S-420750
67887 67820CD X1S-67887
87762 87112DC X1S-87762
87762 87112D X1S-87762
L540049 L540010D L540049XA
3.5 187.0 0.8 240.0 19.0 7.1 622 122 0.1214 16.39
0.14 7.36 0.03 9.45 0.75 0.28
36.13
B
4.8 189.0 1.5 240.0 19.0 7.9 531 107 0.1037 15.37
0.19 7.44 0.06 9.45 0.75 0.31
33.89
8.0 200.0 0.8 240.0 19.0 7.1 622 122 0.1214 14.89
0.31 7.87 0.03 9.45 0.75 0.28
32.82
3.5 192.0 0.8 240.0 19.0 7.1 622 122 0.1214 15.11
0.14 7.56 0.03 9.45 0.75 0.28
33.31
7.0 204.0 1.5 272.0 22.1 10.2 692 93.8 0.1287 34.02
0.28 8.03 0.06 10.71 0.87 0.40
74.99
7.0 202.0 1.5 271.5 22.1 8.6 751 101 0.1168 33.15
0.28 7.95 0.06 10.68 0.87 0.34
73.07
Caption:
1.5 192.0 1.0 261.5 828 112 0.1135 36.99
0.06 7.56 0.04 10.30
81.54
1.5 188.0 0.8 221.0 10.9 4.6 515 241 0.1434 6.14
0.06 7.40 0.03 8.70 0.43 0.18
13.53
3.5 194.0 0.8 240.0 19.0 7.1 622 122 0.1214 14.41
0.14 7.64 0.03 9.45 0.75 0.28
31.78
7.0 207.0 1.5 272.0 22.1 10.2 692 93.8 0.1287 32.98
0.28 8.15 0.06 10.71 0.87 0.40
72.72
7.0 205.0 1.5 271.5 22.1 8.6 751 101 0.1168 32.16
0.28 8.07 0.06 10.68 0.87 0.34
70.91
7.0 207.0 1.5 272.0 692 93.8 0.1287 36.71
0.28 8.15 0.06 10.71
80.93
3.5 202.0 1.5 300.5 28.4 10.2 906 90.3 0.1242 56.99
0.14 7.95 0.06 11.84 1.12 0.40 125.63
3.5 209.0 1.5 300.0 22.1 10.2 912 126 0.1460 47.28
0.14 8.23 0.06 11.81 0.87 0.40 104.23
3.5 204.0 0.8 259.0 22.1 7.1 728 147 0.1310 18.17
0.14 8.03 0.03 10.20 0.87 0.28
40.07
3.5 206.0 0.8 259.0 22.1 7.1 728 147 0.1310 17.45
0.14 8.11 0.03 10.20 0.87 0.28
38.47
3.5 205.0 1.5 256.0 19.0 7.9 788 118 0.1201 20.36
0.14 8.07 0.06 10.08 0.75 0.31
44.89
3.5 207.0 1.5 266.5 575 131 0.1155 20.89
0.14 8.15 0.06 10.50
46.05
5.5 214.0 1.5 300.5 28.4 10.2 906 90.3 0.1242 52.92
0.22 8.43 0.06 11.84 1.12 0.40 116.66
3.5 209.0 0.8 259.0 22.1 7.1 728 147 0.1310 16.69
0.14 8.23 0.03 10.20 0.87 0.28
36.81
3.5 209.0 1.5 266.5 17.3 5.3 575 131 0.1155 20.68
0.14 8.23 0.06 10.50 0.68 0.21
45.59
3.5 209.0 1.5 266.5 575 131 0.1155 20.16
0.14 8.23 0.06 10.50
44.45
4.3 218.0 1.5 300.0 22.1 10.2 912 126 0.1460 43.76
0.17 8.58 0.06 11.81 0.87 0.40
96.48
6.4 227.0 1.5 334.5 25.4 11.7 1150 128 0.1450 84.09
0.25 8.94 0.06 13.16 1.00 0.46 185.38
10.5 223.0 0.8 259.0 22.1 7.1 728 147 0.1310 15.89
0.41 8.78 0.03 10.20 0.87 0.28
35.04
3.5 211.0 1.5 266.5 17.3 5.3 575 131 0.1155 19.88
0.14 8.31 0.06 10.50 0.68 0.21
43.82
3.5 211.0 1.5 266.5 575 131 0.1155 19.36
0.14 8.31 0.06 10.50
42.68
1.5 207.0 0.8 247.0 504 226 0.1371 7.12
0.06 8.15 0.03 9.72
15.70
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B285
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
196.850 257.175 85.725 66.675 513000 0.45 1.51 2.25 76400 58400 133000 1.31
7.7500 10.1250 3.3750 2.6250 115000 17200 13100 29900
196.850 317.500 146.050 111.125 1180000 0.52 1.29 1.92 175000 157000 306000 1.12
7.7500 12.5000 5.7500 4.3750 265000 39500 35300 68700
200.025 292.100 125.415 101.600 1020000 0.33 2.03 3.02 152000 86800 265000 1.76
7.8750 11.5000 4.9376 4.0000 230000 34300 19500 59700
200.025 317.500 146.050 111.125 1180000 0.52 1.29 1.92 175000 157000 306000 1.12
7.8750 12.5000 5.7500 4.3750 265000 39500 35300 68700
200.025 384.175 238.125 193.675 2860000 0.33 2.03 3.02 426000 242000 741000 1.76
7.8750 15.1250 9.3750 7.6250 643000 95700 54500 167000
203.200 276.225 90.485 73.025 707000 0.32 2.12 3.15 105000 57500 183000 1.83
8.0000 10.8750 3.5624 2.8750 159000 23700 12900 41200
203.200 282.575 101.600 82.550 684000 0.51 1.33 1.97 102000 88700 177000 1.15
8.0000 11.1250 4.0000 3.2500 154000 22900 19900 39800
203.200 292.100 109.538 84.138 914000 0.40 1.69 2.51 136000 93300 237000 1.46
8.0000 11.5000 4.3125 3.3125 205000 30600 21000 53200
203.200 292.100 125.415 101.600 1020000 0.33 2.03 3.02 152000 86800 265000 1.76
8.0000 11.5000 4.9376 4.0000 230000 34300 19500 59700
203.200 301.625 125.453 140.005 1020000 0.33 2.03 3.02 152000 86800 265000 1.76
8.0000 11.8750 4.9391 5.5120 230000 34300 19500 59700
203.200 301.625 125.453 140.005 1020000 0.33 2.03 3.02 152000 86800 265000 1.76
8.0000 11.8750 4.9391 5.5120 230000 34300 19500 59700
203.200 317.500 127.000 88.900 901000 0.31 2.15 3.21 134000 72000 234000 1.86
8.0000 12.5000 5.0000 3.5000 203000 30200 16200 52500
203.200 317.500 146.050 111.125 1180000 0.52 1.29 1.92 175000 157000 306000 1.12
8.0000 12.5000 5.7500 4.3750 265000 39500 35300 68700
203.200 368.300 193.675 136.525 1880000 0.40 1.68 2.50 280000 193000 488000 1.45
8.0000 14.5000 7.6250 5.3750 423000 63000 43300 110000
204.788 292.100 125.415 101.600 1020000 0.33 2.03 3.02 152000 86800 265000 1.76
8.0625 11.5000 4.9376 4.0000 230000 34300 19500 59700
206.375 282.575 101.600 82.550 684000 0.51 1.33 1.97 102000 88700 177000 1.15
8.1250 11.1250 4.0000 3.2500 154000 22900 19900 39800
206.375 317.500 127.000 88.900 901000 0.31 2.15 3.21 134000 72000 234000 1.86
8.1250 12.5000 5.0000 3.5000 203000 30200 16200 52500
206.375 336.550 211.138 169.862 2180000 0.33 2.03 3.02 325000 185000 566000 1.76
8.1250 13.2500 8.3125 6.6875 491000 73100 41600 127000
209.550 282.575 101.600 82.550 684000 0.51 1.33 1.97 102000 88700 177000 1.15
8.2500 11.1250 4.0000 3.2500 154000 22900 19900 39800
209.550 317.500 146.050 111.125 1180000 0.52 1.29 1.92 175000 157000 306000 1.12
8.2500 12.5000 5.7500 4.3750 265000 39500 35300 68700
209.550 317.500 146.050 111.125 1180000 0.52 1.29 1.92 175000 157000 306000 1.12
8.2500 12.5000 5.7500 4.3750 265000 39500 35300 68700
209.550 355.600 152.400 111.125 1220000 0.59 1.14 1.70 182000 184000 317000 0.99
8.2500 14.0000 6.0000 4.3750 275000 41000 41400 71300
212.725 285.750 98.425 76.200 693000 0.48 1.40 2.09 103000 85000 180000 1.21
8.3750 11.2500 3.8750 3.0000 156000 23200 19100 40400
215.900 285.750 98.425 76.200 646000 0.48 1.40 2.09 96200 79200 167000 1.21
8.5000 11.2500 3.8750 3.0000 145000 21600 17800 37600
215.900 285.750 98.425 76.200 693000 0.48 1.40 2.09 103000 85000 180000 1.21
8.5000 11.2500 3.8750 3.0000 156000 23200 19100 40400
215.900 406.400 195.262 147.638 2510000 0.39 1.72 2.55 374000 252000 652000 1.48
8.5000 16.0000 7.6875 5.8125 565000 84200 56700 147000
220.663 314.325 131.762 106.362 1190000 0.33 2.03 3.02 177000 101000 308000 1.76
8.6875 12.3750 5.1875 4.1875 267000 39700 22600 69200
225.425 400.050 187.325 136.525 1920000 0.44 1.54 2.29 286000 215000 497000 1.33
8.8750 15.7500 7.3750 5.3750 431000 64200 48300 112000
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B286 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
LM739749 LM739710CD LM739749XA
93775 93127CD X1S-93775
M241543 M241510CD M241543XA
93787 93127CD X3S-93787
H247535 H247510CD H247535XA
LM241149 LM241110D LM241149XA
67983 67920CD X2S-67983
M541349 M541310CD M541349XA
M241547 M241510CD X2S-67983
M241547C M241513D M241547XA
M241547 M241513XD M241547XA
EE132083 132126D X1S-132081
93800 93127CD X5S-93800
EE420801 421451CD X3S-420801
M241549 M241510CD M241549XA
67985 67920CD X2S-67985
EE132084 132126D X2S-132084
H242649 H242610CD H242649XB
67989 67920CD X1S-67989
93825 93127CD X3S-93825
93825A 93127CD X1S-93825
96825 96140CD X1S-96825
LM742745 LM742710CD LM742745XB
LM742748 LM742710CD
LM742749 LM742710CD LM742749XC
EE820085 820161CD X1S-820085
M244249 M244210CD M244249XA
EE430888 431576CD X1S-430888
3.5 213.0 0.8 251.0 14.2 6.4 762 232 0.1296 11.08
0.14 8.39 0.03 9.88 0.56 0.25
24.43
B
4.3 223.0 1.5 300.0 22.1 10.2 912 126 0.1460 41.54
0.17 8.78 0.06 11.81 0.87 0.40
91.58
3.5 219.0 1.5 279.0 19.0 8.6 954 128 0.1279 26.09
0.14 8.62 0.06 10.98 0.75 0.34
57.52
4.3 225.0 1.5 300.0 22.1 10.2 912 126 0.1460 40.58
0.17 8.86 0.06 11.81 0.87 0.40
89.46
6.4 241.0 1.5 362.0 28.4 11.7 1960 148 0.1638 123.53
0.25 9.49 0.06 14.26 1.12 0.46 272.34
3.5 220.0 0.8 267.0 774 182 0.1170 14.52
0.14 8.66 0.03 10.51
32.02
Caption:
3.5 222.0 0.8 275.0 19.0 7.1 820 172 0.1388 18.66
0.14 8.74 0.03 10.83 0.75 0.28
41.14
3.5 221.0 0.8 281.0 19.0 7.9 752 147 0.1253 21.43
0.14 8.70 0.03 11.06 0.75 0.31
47.24
3.5 221.0 1.5 279.0 19.0 8.6 954 128 0.1279 25.12
0.14 8.70 0.06 10.98 0.75 0.34
55.37
3.5 221.0 0.8 290.0 954 128 0.1279 31.06
0.14 8.70 0.03 11.42
68.46
3.5 221.0 0.8 286.5 954 128 0.1279 31.73
0.14 8.70 0.03 11.28
69.95
4.0 225.0 1.5 293.0 798 125 0.1174 34.36
0.16 8.86 0.06 11.54
75.74
4.3 227.0 1.5 300.0 22.1 10.2 912 126 0.1460 39.58
0.17 8.94 0.06 11.81 0.87 0.40
87.26
3.3 230.0 1.5 334.5 25.4 11.7 1150 128 0.1450 78.57
0.13 9.06 0.06 13.16 1.00 0.46 173.20
3.5 223.0 1.5 279.0 19.0 8.6 954 128 0.1279 24.60
0.14 8.78 0.06 10.98 0.75 0.34
54.24
3.5 224.0 0.8 275.0 19.0 7.1 820 172 0.1388 17.87
0.14 8.82 0.03 10.83 0.75 0.28
39.39
4.0 227.0 1.5 293.0 798 125 0.1174 33.32
0.16 8.94 0.06 11.54
73.45
3.3 231.0 1.5 318.0 28.4 10.2 1400 135 0.1465 68.93
0.13 9.09 0.06 12.51 1.12 0.40 151.97
3.5 227.0 0.8 275.0 19.0 7.1 820 172 0.1388 17.21
0.14 8.94 0.03 10.83 0.75 0.28
37.95
4.3 233.0 1.5 300.0 22.1 10.2 912 126 0.1460 37.26
0.17 9.17 0.06 11.81 0.87 0.40
82.14
12.7 250.0 1.5 300.0 22.1 10.2 912 126 0.1460 36.49
0.50 9.84 0.06 11.81 0.87 0.40
80.45
7.0 246.0 1.5 334.0 25.4 9.4 1140 160 0.1626 57.19
0.28 9.69 0.06 13.15 1.00 0.37 126.08
3.5 230.0 0.8 279.0 17.3 7.1 867 225 0.1388 16.55
0.14 9.06 0.03 10.98 0.68 0.28
36.48
3.5 233.0 0.8 279.0 17.3 7.1 808 211 0.1354 15.50
0.14 9.17 0.03 10.98 0.68 0.28
34.18
3.5 233.0 0.8 279.0 17.3 7.1 867 225 0.1388 15.74
0.14 9.17 0.03 10.98 0.68 0.28
34.70
6.4 251.0 1.5 372.0 28.4 11.7 1330 112 0.1509 102.16
0.25 9.88 0.06 14.65 1.12 0.46 225.21
6.4 245.0 1.5 300.0 22.1 9.4 1150 141 0.1360 31.22
0.25 9.65 0.06 11.81 0.87 0.37
68.83
1.5 251.0 1.5 364.0 28.4 11.7 1350 143 0.1572 90.91
0.06 9.88 0.06 14.34 1.12 0.46 200.41
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B287
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
228.397 431.800 196.850 111.125 1900000 0.88 0.76 1.14 282000 427000 492000 0.66
8.9920 17.0000 7.7500 4.3750 426000 63500 96000 111000
228.460 431.800 196.850 111.125 1900000 0.88 0.76 1.14 282000 427000 492000 0.66
8.9945 17.0000 7.7500 4.3750 426000 63500 96000 111000
228.600 327.025 114.300 82.550 900000 0.41 1.66 2.47 134000 93300 233000 1.44
9.0000 12.8750 4.5000 3.2500 202000 30100 21000 52500
228.600 355.600 152.400 111.125 1220000 0.59 1.14 1.70 182000 184000 317000 0.99
9.0000 14.0000 6.0000 4.3750 275000 41000 41400 71300
228.600 355.600 152.400 111.125 1360000 0.33 2.04 3.04 202000 114000 352000 1.77
9.0000 14.0000 6.0000 4.3750 306000 45500 25700 79200
228.600 355.600 152.400 114.300 1620000 0.47 1.43 2.12 242000 196000 421000 1.24
9.0000 14.0000 6.0000 4.5000 365000 54300 44000 94600
228.600 358.775 152.400 117.475 1560000 0.33 2.03 3.02 232000 132000 405000 1.76
9.0000 14.1250 6.0000 4.6250 351000 52200 29700 91000
228.600 400.050 187.325 136.525 1920000 0.44 1.54 2.29 286000 215000 497000 1.33
9.0000 15.7500 7.3750 5.3750 431000 64200 48300 112000
228.600 400.050 187.325 136.525 1920000 0.44 1.54 2.29 286000 215000 497000 1.33
9.0000 15.7500 7.3750 5.3750 431000 64200 48300 112000
228.600 488.950 254.000 152.400 3050000 0.94 0.72 1.07 455000 730000 792000 0.62
9.0000 19.2500 10.0000 6.0000 686000 102000 164000 178000
231.775 358.775 152.400 117.475 1560000 0.33 2.03 3.02 232000 132000 405000 1.76
9.1250 14.1250 6.0000 4.6250 351000 52200 29700 91000
234.950 311.150 98.425 73.025 753000 0.36 1.86 2.77 112000 69600 195000 1.61
9.2500 12.2500 3.8750 2.8750 169000 25200 15600 43900
234.950 327.025 114.300 82.550 866000 0.41 1.66 2.47 129000 89700 224000 1.44
9.2500 12.8750 4.5000 3.2500 195000 29000 20200 50500
234.950 327.025 114.300 82.550 900000 0.41 1.66 2.47 134000 93300 233000 1.44
9.2500 12.8750 4.5000 3.2500 202000 30100 21000 52500
234.950 355.600 152.400 111.125 1220000 0.59 1.14 1.70 182000 184000 317000 0.99
9.2500 14.0000 6.0000 4.3750 275000 41000 41400 71300
234.950 384.175 238.125 193.675 3020000 0.33 2.03 3.02 450000 256000 784000 1.76
9.2500 15.1250 9.3750 7.6250 680000 101000 57600 176000
234.950 384.175 238.125 193.675 2860000 0.33 2.03 3.02 426000 242000 741000 1.76
9.2500 15.1250 9.3750 7.6250 643000 95700 54500 167000
237.330 358.775 152.400 117.475 1560000 0.33 2.03 3.02 232000 132000 405000 1.76
9.3437 14.1250 6.0000 4.6250 351000 52200 29700 91000
241.300 327.025 114.300 82.550 900000 0.41 1.66 2.47 134000 93300 233000 1.44
9.5000 12.8750 4.5000 3.2500 202000 30100 21000 52500
241.300 349.148 127.000 101.600 1130000 0.35 1.91 2.85 168000 101000 292000 1.65
9.5000 13.7460 5.0000 4.0000 253000 37700 22800 65700
241.300 368.300 120.650 85.725 956000 0.36 1.86 2.77 142000 88500 248000 1.61
9.5000 14.5000 4.7500 3.3750 215000 32000 19900 55700
241.300 406.400 155.575 107.950 1510000 0.40 1.68 2.50 224000 154000 391000 1.45
9.5000 16.0000 6.1250 4.2500 339000 50400 34700 87800
241.300 406.400 215.900 184.150 2780000 0.33 2.03 3.02 414000 236000 721000 1.76
9.5000 16.0000 8.5000 7.2500 625000 93100 53000 162000
244.475 380.898 171.450 127.000 1550000 0.52 1.31 1.95 231000 204000 402000 1.13
9.6250 14.9960 6.7500 5.0000 348000 51800 45800 90300
244.475 381.000 171.450 127.000 1550000 0.52 1.31 1.95 231000 204000 402000 1.13
9.6250 15.0000 6.7500 5.0000 348000 51800 45800 90300
247.650 368.300 120.650 85.725 956000 0.36 1.86 2.77 142000 88500 248000 1.61
9.7500 14.5000 4.7500 3.3750 215000 32000 19900 55700
247.650 381.000 158.750 123.825 1710000 0.33 2.03 3.02 255000 145000 443000 1.76
9.7500 15.0000 6.2500 4.8750 384000 57200 32600 99600
249.250 380.898 171.450 127.000 1550000 0.52 1.31 1.95 231000 204000 402000 1.13
9.8130 14.9960 6.7500 5.0000 348000 51800 45800 90300
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B288 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
EE113089 113171D X1S-113089
EE113091 113171D X1S-113091
8573 8520CD X3S-8573
96900 96140CD X5S-96900
EE130902 131401CD X1S-130902
HM746646 HM746610CD HM746646XC
M249732 M249710CD M249732XA
EE430900 431576CD X3S-430900
EE430902 431576CD X2S-430900
HH949549 HH949510DC HH949549XA
M249734 M249710CD M249734XB
LM446349 LM446310D LM446349XA
8574 8520CD X1S-8575
8575 8520CD X2S-8575
96925 96140CD X1S-96925
H247548 H247510CD H247549XB
H247549 H247510CD H247549XB
M249736 M249710CD M249736XA
8578 8520CD X2S-8578
EE127095 127136CD X2S-127095
EE170950 171451CD X1S-170951
EE275095 275161D X3S-275095
H249148 H249111CD H249148XB
EE126097 126149D
EE126097 126151CD X1S-126097
EE170975 171451CD X1S-170975
M252337 M252310CD LM249748XA
EE126098 126149D X1S-126098
6.4 274.0 3.3 397.5 967 98.1 0.1723 104.99
0.25 10.79 0.13 15.64 231.46
B
6.4 274.0 3.3 397.5 967 98.1 0.1723 104.99
0.25 10.79 0.13 15.64 231.46
6.4 255.0 1.5 313.0 19.0 7.9 1050 172 0.1401 28.35
0.25 10.04 0.06 12.32 0.75 0.31
62.49
7.0 260.0 1.5 334.0 25.4 9.4 1140 160 0.1626 49.51
0.28 10.24 0.06 13.15 1.00 0.37 109.14
6.8 257.0 1.5 330.0 22.1 8.6 1160 168 0.1358 48.30
0.27 10.12 0.06 12.99 0.87 0.34 106.48
6.4 258.0 1.5 339.0 25.4 9.4 1190 149 0.1542 55.05
0.25 10.16 0.06 13.34 1.00 0.37 121.37
Caption:
3.5 256.0 1.5 343.0 25.4 8.6 1630 168 0.1526 56.44
0.14 10.08 0.06 13.50 1.00 0.34 124.42
10.5 271.0 1.5 364.0 28.4 11.7 1350 143 0.1572 88.47
0.41 10.67 0.06 14.34 1.12 0.46 195.04
19.8 290.0 1.5 364.0 28.4 11.7 1350 143 0.1572 86.76
0.78 11.42 0.06 14.34 1.12 0.46 191.28
6.4 297.0 1.5 456.0 28.4 11.7 1300 91.5 0.1931 197.00
0.25 11.69 0.06 17.95 1.12 0.46 434.31
6.4 263.0 1.5 343.0 25.4 8.6 1630 168 0.1526 54.98
0.25 10.35 0.06 13.50 1.00 0.34 121.22
3.5 252.0 0.8 301.0 1010 243 0.1328 18.37
0.14 9.92 0.03 11.85
40.49
6.4 259.0 1.5 313.0 19.0 7.9 1010 166 0.1382 26.12
0.25 10.20 0.06 12.32 0.75 0.31
57.59
6.4 259.0 1.5 313.0 19.0 7.9 1050 172 0.1401 26.16
0.25 10.20 0.06 12.32 0.75 0.31
57.67
7.0 265.0 1.5 334.0 25.4 9.4 1140 160 0.1626 46.71
0.28 10.43 0.06 13.15 1.00 0.37 102.98
6.4 269.0 1.5 362.0 28.4 11.7 2080 156 0.1671 101.24
0.25 10.59 0.06 14.26 1.12 0.46 223.20
6.4 269.0 1.5 362.0 28.4 11.7 1960 148 0.1638 102.18
0.25 10.59 0.06 14.26 1.12 0.46 225.26
6.4 267.0 1.5 343.0 25.4 8.6 1630 168 0.1526 51.88
0.25 10.51 0.06 13.50 1.00 0.34 114.37
6.4 264.0 1.5 313.0 19.0 7.9 1050 172 0.1401 24.10
0.25 10.39 0.06 12.32 0.75 0.31
53.12
6.4 267.0 1.5 329.0 22.1 9.4 1180 164 0.1392 34.96
0.25 10.51 0.06 12.95 0.87 0.37
77.06
6.4 269.0 1.5 337.0 19.0 10.2 1070 172 0.1354 39.99
0.25 10.59 0.06 13.27 0.75 0.40
88.17
6.4 278.0 1.5 378.0 1450 201 0.1555 73.44
0.25 10.94 0.06 14.89 161.91
6.4 273.0 1.5 385.0 28.4 11.7 1710 135 0.1556 104.29
0.25 10.75 0.06 15.16 1.12 0.46 229.92
6.4 275.0 1.5 358.0 1320 169 0.1640 63.77
0.25 10.83 0.06 14.09 140.58
6.4 275.0 1.5 358.0 28.4 11.7 1320 169 0.1640 65.08
0.25 10.83 0.06 14.09 1.12 0.46 143.47
6.4 274.0 1.5 337.0 19.0 10.2 1070 172 0.1354 37.53
0.25 10.79 0.06 13.27 0.75 0.40
82.73
6.4 280.0 1.5 363.5 28.4 10.2 1840 226 0.1588 62.36
0.25 11.02 0.06 14.32 1.12 0.40 137.48
6.4 279.0 1.5 358.0 1320 169 0.1640 62.71
0.25 10.98 0.06 14.09 138.24
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B289
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
249.250 381.000 171.450 127.000 1550000 0.52 1.31 1.95 231000 204000 402000 1.13
9.8130 15.0000 6.7500 5.0000 348000 51800 45800 90300
254.000 323.850 63.500 50.800 258000 0.35 1.95 2.90 38400 22800 66800 1.69
10.0000 12.7500 2.5000 2.0000 57900 8630 5120 15000
254.000 347.662 95.250 69.850 912000 0.33 2.03 3.02 136000 77300 236000 1.76
10.0000 13.6875 3.7500 2.7500 205000 30500 17400 53200
254.000 358.775 152.400 117.475 1560000 0.33 2.03 3.02 232000 132000 405000 1.76
10.0000 14.1250 6.0000 4.6250 351000 52200 29700 91000
254.000 365.125 130.175 98.425 1160000 0.37 1.80 2.69 173000 111000 301000 1.56
10.0000 14.3750 5.1250 3.8750 261000 38800 24900 67600
254.000 406.400 155.575 107.950 1510000 0.40 1.68 2.50 224000 154000 391000 1.45
10.0000 16.0000 6.1250 4.2500 339000 50400 34700 87800
254.000 422.275 173.038 128.588 2230000 0.33 2.03 3.02 332000 189000 578000 1.76
10.0000 16.6250 6.8125 5.0625 502000 74700 42500 130000
254.000 422.275 173.038 128.588 2300000 0.33 2.03 3.02 343000 195000 597000 1.76
10.0000 16.6250 6.8125 5.0625 517000 77000 43900 134000
254.000 422.275 178.592 139.700 2230000 0.33 2.03 3.02 332000 189000 578000 1.76
10.0000 16.6250 7.0312 5.5000 502000 74700 42500 130000
254.000 422.275 178.592 139.700 2300000 0.33 2.03 3.02 343000 195000 597000 1.76
10.0000 16.6250 7.0312 5.5000 517000 77000 43900 134000
254.000 431.724 173.038 128.588 2230000 0.33 2.03 3.02 332000 189000 578000 1.76
10.0000 16.9970 6.8125 5.0625 502000 74700 42500 130000
254.000 431.724 173.038 128.588 2300000 0.33 2.03 3.02 343000 195000 597000 1.76
10.0000 16.9970 6.8125 5.0625 517000 77000 43900 134000
254.000 533.400 276.225 165.100 3650000 0.94 0.72 1.07 543000 872000 946000 0.62
10.0000 21.0000 10.8750 6.5000 820000 122000 196000 213000
260.350 365.125 130.175 98.425 1160000 0.37 1.80 2.69 173000 111000 301000 1.56
10.2500 14.3750 5.1250 3.8750 261000 38800 24900 67600
260.350 400.050 155.580 107.950 1410000 0.39 1.71 2.55 210000 142000 366000 1.48
10.2500 15.7500 6.1252 4.2500 318000 47300 31900 82300
260.350 419.100 184.150 136.525 1920000 0.60 1.12 1.66 286000 296000 497000 0.97
10.2500 16.5000 7.2500 5.3750 431000 64200 66500 112000
260.350 419.100 184.150 136.525 1920000 0.60 1.12 1.66 286000 296000 497000 0.97
10.2500 16.5000 7.2500 5.3750 431000 64200 66500 112000
260.350 422.275 173.038 128.588 2230000 0.33 2.03 3.02 332000 189000 578000 1.76
10.2500 16.6250 6.8125 5.0625 502000 74700 42500 130000
260.350 422.275 178.592 139.700 2230000 0.33 2.03 3.02 332000 189000 578000 1.76
10.2500 16.6250 7.0312 5.5000 502000 74700 42500 130000
260.350 422.275 178.592 139.700 2300000 0.33 2.03 3.02 343000 195000 597000 1.76
10.2500 16.6250 7.0312 5.5000 517000 77000 43900 134000
260.350 431.724 173.038 128.588 2230000 0.33 2.03 3.02 332000 189000 578000 1.76
10.2500 16.9970 6.8125 5.0625 502000 74700 42500 130000
260.350 431.724 173.038 128.588 2300000 0.33 2.03 3.02 343000 195000 597000 1.76
10.2500 16.9970 6.8125 5.0625 517000 77000 43900 134000
263.525 355.600 127.000 101.600 1200000 0.36 1.87 2.79 178000 110000 310000 1.62
10.3750 14.0000 5.0000 4.0000 269000 40100 24700 69800
266.700 323.850 63.500 50.800 258000 0.35 1.95 2.90 38400 22800 66800 1.69
10.5000 12.7500 2.5000 2.0000 57900 8630 5120 15000
266.700 323.850 63.500 50.800 258000 0.35 1.95 2.90 38400 22800 66800 1.69
10.5000 12.7500 2.5000 2.0000 57900 8630 5120 15000
266.700 355.600 127.000 101.600 1200000 0.36 1.87 2.79 178000 110000 310000 1.62
10.5000 14.0000 5.0000 4.0000 269000 40100 24700 69800
266.700 393.700 157.162 109.538 1510000 0.40 1.68 2.50 224000 154000 391000 1.45
10.5000 15.5000 6.1875 4.3125 339000 50400 34700 87800
266.700 406.400 155.575 107.950 1510000 0.40 1.68 2.50 224000 154000 391000 1.45
10.5000 16.0000 6.1250 4.2500 339000 50400 34700 87800
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B290 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
EE126098 126151CD X1S-126098
29875 29820D X2S-29875
LM249748 LM249710CD LM249748XA
M249749 M249710CD M249749XC
EE134100 134144CD X1S-134100
EE275100 275161D X2S-275100
HM252343 HM252311D HM252343XA
HM252344 HM252311D HM252343XA
HM252343 HM252310CD HM252343XC
HM252344 HM252310CD HM252343XB
HM252343 HM252315D HM252343XA
HM252344 HM252315D
HH953749 HH953710D HH953749XA
EE134102 134144CD X1S-134102
EE221026 221576CD X1S-221025
EE435102 435165DC
EE435102 435165D X2S-435102
HM252348 HM252311D HM252347XB
HM252348 HM252310CD HM252349XB
HM252349 HM252310CD HM252349XC
HM252348 HM252315D HM252347XB
HM252349 HM252315D HM252347XB
LM451345 LM451310CD LM451345XA
29880 29820DC X1S-29880
29880 29820D X1S-29880
LM451349 LM451310CD LM451349XB
EE275105 275156CD X1S-275105
EE275105 275161D X2S-275105
6.4 279.0 1.5 358.0 28.4 11.7 1320 169 0.1640 62.59
0.25 10.98 0.06 14.09 1.12 0.46 137.99
B
1.5 267.0 0.8 312.0 907 657 0.1567 11.03
0.06 10.51 0.03 12.28
24.31
3.5 272.0 1.5 333.0 15.7 7.1 1000 166 0.1287 22.69
0.14 10.71 0.06 13.11 0.62 0.28
50.02
3.5 274.0 1.5 343.0 25.4 8.6 1630 168 0.1526 44.80
0.14 10.79 0.06 13.50 1.00 0.34
98.76
6.4 281.0 1.5 347.0 22.1 10.2 1330 187 0.1474 38.97
0.25 11.06 0.06 13.66 0.87 0.40
85.91
6.4 287.0 1.5 378.0 1450 201 0.1555 68.38
0.25 11.30 0.06 14.89 150.76
Caption:
6.8 287.0 1.5 399.5 1500 148 0.1482 84.11
0.27 11.30 0.06 15.73 185.43
6.8 287.0 1.5 399.5 1550 152 0.1498 84.43
0.27 11.30 0.06 15.73 186.13
6.8 287.0 1.5 399.5 28.4 11.7 1500 148 0.1482 85.43
0.27 11.30 0.06 15.73 1.12 0.46 188.34
6.8 287.0 1.5 399.5 28.4 11.7 1550 152 0.1498 90.24
0.27 11.30 0.06 15.73 1.12 0.46 198.95
6.8 287.0 1.5 398.5 1500 148 0.1482 90.46
0.27 11.30 0.06 15.68 199.44
6.8 287.0 1.5 398.5 1550 152 0.1498 89.42
0.27 11.30 0.06 15.68 197.14
6.4 328.0 1.5 495.5 1670 104 0.2101 252.22
0.25 12.91 0.06 19.51 556.05
6.4 286.0 1.5 347.0 22.1 10.2 1330 187 0.1474 36.45
0.25 11.26 0.06 13.66 0.87 0.40
80.36
9.7 296.0 1.5 371.5 22.1 10.2 1320 207 0.1497 59.70
0.38 11.65 0.06 14.63 0.87 0.40 131.62
6.4 295.0 1.5 395.0 28.4 10.2 1480 123 0.1787 87.65
0.25 11.61 0.06 15.56 1.12 0.40 193.23
6.4 295.0 1.5 395.0 1480 123 0.1787 88.83
0.25 11.61 0.06 15.56 195.83
6.8 292.0 1.5 399.5 1500 148 0.1482 81.33
0.27 11.50 0.06 15.73 179.29
6.8 292.0 1.5 399.5 28.4 11.7 1500 148 0.1482 82.22
0.27 11.50 0.06 15.73 1.12 0.46 181.26
6.8 292.0 1.5 399.5 28.4 11.7 1550 152 0.1498 86.70
0.27 11.50 0.06 15.73 1.12 0.46 191.14
6.8 292.0 1.5 398.5 1500 148 0.1482 87.68
0.27 11.50 0.06 15.68 193.30
6.8 292.0 1.5 398.5 1550 152 0.1498 87.67
0.27 11.50 0.06 15.68 193.27
3.5 283.0 1.5 343.0 22.1 8.6 1550 212 0.1536 32.91
0.14 11.14 0.06 13.50 0.87 0.34
72.55
1.5 277.0 0.8 312.0 10.9 5.3 907 657 0.1567 9.05
0.06 10.91 0.03 12.28 0.43 0.21
19.95
1.5 277.0 0.8 312.0 907 657 0.1567 9.04
0.06 10.91 0.03 12.28
19.93
3.5 285.0 1.5 343.0 22.1 8.6 1550 212 0.1536 31.73
0.14 11.22 0.06 13.50 0.87 0.34
69.96
6.4 296.0 1.5 378.0 25.4 9.4 1450 201 0.1555 55.21
0.25 11.65 0.06 14.89 1.00 0.37 121.71
6.4 296.0 1.5 378.0 1450 201 0.1555 62.05
0.25 11.65 0.06 14.89 136.80
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B291
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
269.875 381.000 158.750 123.825 1710000 0.33 2.03 3.02 255000 145000 443000 1.76
10.6250 15.0000 6.2500 4.8750 384000 57200 32600 99600
273.050 393.700 157.162 109.538 1510000 0.40 1.68 2.50 224000 154000 391000 1.45
10.7500 15.5000 6.1875 4.3125 339000 50400 34700 87800
273.050 406.400 155.575 107.950 1510000 0.40 1.68 2.50 224000 154000 391000 1.45
10.7500 16.0000 6.1250 4.2500 339000 50400 34700 87800
279.400 469.900 200.025 149.225 2400000 0.38 1.79 2.66 357000 231000 622000 1.55
11.0000 18.5000 7.8750 5.8750 540000 80300 52000 140000
279.982 380.898 139.700 107.950 1230000 0.43 1.56 2.33 184000 136000 320000 1.35
11.0229 14.9960 5.5000 4.2500 277000 41300 30500 71800
280.192 406.400 120.650 85.725 1030000 0.41 1.65 2.46 153000 107000 266000 1.43
11.0312 16.0000 4.7500 3.3750 231000 34400 24000 59900
280.192 406.400 149.225 117.475 1580000 0.39 1.75 2.60 235000 155000 409000 1.51
11.0312 16.0000 5.8750 4.6250 355000 52800 34900 92000
280.192 406.400 149.225 117.475 1480000 0.39 1.75 2.60 221000 146000 384000 1.51
11.0312 16.0000 5.8750 4.6250 333000 49600 32800 86400
285.750 358.775 76.200 53.975 440000 0.49 1.37 2.04 65500 55200 114000 1.19
11.2500 14.1250 3.0000 2.1250 98900 14700 12400 25600
285.750 501.650 203.200 120.650 2330000 0.83 0.81 1.20 346000 495000 603000 0.70
11.2500 19.7500 8.0000 4.7500 523000 77900 111000 136000
288.925 406.400 165.100 130.175 2030000 0.34 2.00 2.97 302000 175000 526000 1.73
11.3750 16.0000 6.5000 5.1250 457000 68000 39300 118000
292.100 469.900 200.025 149.225 2400000 0.38 1.79 2.66 357000 231000 622000 1.55
11.5000 18.5000 7.8750 5.8750 540000 80300 52000 140000
299.975 495.300 301.625 247.650 4900000 0.33 2.03 3.02 729000 415000 1270000 1.76
11.8100 19.5000 11.8750 9.7500 1100000 164000 93300 285000
300.038 422.275 174.625 136.525 2210000 0.34 2.00 2.99 330000 190000 574000 1.73
11.8125 16.6250 6.8750 5.3750 498000 74100 42700 129000
304.800 393.700 107.950 82.550 1000000 0.36 1.88 2.80 149000 91600 259000 1.63
12.0000 15.5000 4.2500 3.2500 225000 33500 20600 58300
304.800 444.500 146.050 98.425 1320000 0.38 1.79 2.66 196000 127000 342000 1.55
12.0000 17.5000 5.7500 3.8750 297000 44200 28600 76900
317.500 444.500 146.050 98.425 1320000 0.38 1.79 2.66 196000 127000 342000 1.55
12.5000 17.5000 5.7500 3.8750 297000 44200 28600 76900
330.200 482.600 177.800 127.000 2130000 0.39 1.73 2.57 318000 213000 553000 1.49
13.0000 19.0000 7.0000 5.0000 480000 71400 47800 124000
333.375 469.900 190.500 152.400 2730000 0.33 2.02 3.00 407000 233000 708000 1.74
13.1250 18.5000 7.5000 6.0000 614000 91400 52400 159000
339.949 589.949 340.002 278.000 6660000 0.33 2.03 3.02 992000 565000 1730000 1.76
13.3838 23.2263 13.3859 10.9449 1500000 223000 127000 388000
342.900 457.098 142.875 101.600 1400000 0.71 0.95 1.41 209000 255000 364000 0.82
13.5000 17.9960 5.6250 4.0000 316000 47000 57400 81900
346.075 482.600 133.350 88.900 935000 0.50 1.35 2.01 139000 119000 242000 1.17
13.6250 19.0000 5.2500 3.5000 210000 31300 26800 54500
346.075 488.950 200.025 158.750 2770000 0.33 2.02 3.00 413000 237000 719000 1.74
13.6250 19.2500 7.8750 6.2500 624000 92900 53200 162000
346.075 488.950 200.025 158.750 2950000 0.33 2.02 3.00 439000 252000 765000 1.74
13.6250 19.2500 7.8750 6.2500 663000 98700 56600 172000
349.250 514.350 193.675 152.400 2300000 0.37 1.84 2.74 343000 216000 598000 1.59
13.7500 20.2500 7.6250 6.0000 518000 77200 48500 134000
354.012 482.600 133.350 88.900 935000 0.50 1.35 2.01 139000 119000 242000 1.17
13.9375 19.0000 5.2500 3.5000 210000 31300 26800 54500
355.600 444.500 136.525 111.125 1250000 0.31 2.20 3.27 186000 98000 324000 1.90
14.0000 17.5000 5.3750 4.3750 281000 41900 22000 72900
355.600 501.650 155.575 107.950 1570000 0.44 1.53 2.28 233000 176000 406000 1.33
14.0000 19.7500 6.1250 4.2500 352000 52400 39500 91200
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B292 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
M252349 M252310CD M252349XC
EE275108 275156CD X1S-275108
EE275108 275161D X2S-275108
EE722110 722186CD X2S-722110
LM654642 LM654610CD LM654642XC
EE101103 101601CD X2S-101103
EE128110 128160CD X2S-128111
EE128111 128160CD X2S-128111
545112 545142CD X2S-545112
EE147112 147198DC X1S-147112
M255449 M255410CD M255449XB
EE722115 722186CD X2S-722115
HH258248 HH258210CD HH258248XB
HM256849 HM256810CD HM256849XC
L357049 L357010CD L357049XA
EE291201 291751CD X1S-291201
EE291250 291751CD X1S-291250
EE526130 526191CD X1S-526132
HM261049 HM261010CD HM261049XC
HH264149 HH264110CD HH264149XA
LM961548 LM961511D LM961548XB
EE161363 161901CD X1S-161362
HM262748 HM262710CD HM262749XC
HM262749 HM262710CD HM262749XC
EE333137 333203CD X1S-333137
EE161394 161901CD X1S-161393
L163149 L163110CD L163149XE
EE231400 231976CD X2S-161400
6.4 296.0 1.5 363.5 28.4 10.2 1840 226 0.1588 52.17
0.25 11.65 0.06 14.32 1.12 0.40 115.01
B
6.4 301.0 1.5 378.0 25.4 9.4 1450 201 0.1555 51.95
0.25 11.85 0.06 14.89 1.00 0.37 114.53
6.4 301.0 1.5 378.0 1450 201 0.1555 58.76
0.25 11.85 0.06 14.89 129.55
9.7 321.0 1.5 433.0 28.4 11.7 1890 143 0.1669 120.44
0.38 12.64 0.06 17.04 1.12 0.46 265.52
3.5 302.0 1.5 368.0 22.1 10.2 1920 265 0.1744 43.44
0.14 11.89 0.06 14.49 0.87 0.40
95.78
6.8 309.0 1.5 376.0 19.0 10.2 1380 227 0.1527 45.04
0.27 12.17 0.06 14.80 0.75 0.40
99.30
Caption:
6.8 309.0 1.5 384.0 25.4 9.4 1730 255 0.1628 55.92
0.27 12.17 0.06 15.12 1.00 0.37 123.28
6.8 309.0 1.5 384.0 25.4 9.4 1620 240 0.1592 56.22
0.27 12.17 0.06 15.12 1.00 0.37 123.95
3.5 302.0 1.5 345.0 14.2 7.9 1020 477 0.1446 15.27
0.14 11.89 0.06 13.58 0.56 0.31
33.66
6.4 329.0 3.3 468.0 28.4 11.7 1490 138 0.1954 145.20
0.25 12.95 0.13 18.43 1.12 0.46 320.10
6.4 316.0 1.5 388.0 28.4 10.9 2300 287 0.1722 62.80
0.25 12.44 0.06 15.27 1.12 0.43 138.46
9.7 330.0 1.5 433.0 28.4 11.7 1890 143 0.1669 111.31
0.38 12.99 0.06 17.04 1.12 0.46 245.38
6.4 342.0 1.5 467.5 28.4 14.2 3850 220 0.2048 229.00
0.25 13.46 0.06 18.40 1.12 0.56 504.84
6.4 328.0 1.5 403.5 28.4 11.7 2550 282 0.1779 72.15
0.25 12.91 0.06 15.88 1.12 0.46 159.06
6.4 329.0 1.5 380.0 19.0 7.9 1750 301 0.1585 29.83
0.25 12.95 0.06 14.96 0.75 0.31
65.76
8.0 337.0 1.5 414.0 22.1 11.7 1580 245 0.1557 62.62
0.31 13.27 0.06 16.30 0.87 0.46 138.05
8.0 346.0 1.5 414.0 22.1 11.7 1580 245 0.1557 55.13
0.31 13.62 0.06 16.30 0.87 0.46 121.55
6.4 360.0 1.5 454.0 28.4 11.7 2280 287 0.1790 92.08
0.25 14.17 0.06 17.87 1.12 0.46 203.00
6.4 363.0 1.5 449.5 28.4 11.7 3310 324 0.1935 95.17
0.25 14.29 0.06 17.69 1.12 0.46 209.80
14.0 402.0 3.5 552.0 28.4 15.0 5000 238 0.2228 378.88
0.55 15.83 0.14 21.73 1.12 0.59 835.26
3.3 367.0 1.5 443.0 2280 300 0.2146 59.66
0.13 14.45 0.06 17.44 131.52
7.0 379.0 1.5 455.0 22.1 11.7 1730 299 0.1741 61.90
0.28 14.92 0.06 17.91 0.87 0.46 136.45
6.4 377.0 1.5 467.0 28.4 11.7 3430 322 0.1956 110.39
0.25 14.84 0.06 18.39 1.12 0.46 243.37
6.4 377.0 1.5 467.0 28.4 11.7 3650 342 0.1999 114.34
0.25 14.84 0.06 18.39 1.12 0.46 252.06
6.4 382.0 1.5 478.5 28.4 11.7 3040 337 0.1928 123.32
0.25 15.04 0.06 18.83 1.12 0.46 271.86
7.0 385.0 1.5 455.0 22.1 11.7 1730 299 0.1741 58.34
0.28 15.16 0.06 17.91 0.87 0.46 128.62
3.5 374.0 1.5 430.0 22.1 9.4 3210 621 0.1838 46.06
0.14 14.72 0.06 16.93 0.87 0.37 101.53
6.4 388.0 1.5 481.0 22.1 11.7 2390 366 0.1874 81.86
0.25 15.28 0.06 18.94 0.87 0.46 180.48
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B293
•
ROLLER BEARINGS
Caption:
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors (5)
Dynamic (2) Factors (5)
TDO DOUBLE
OUTER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
355.600 514.350 155.575 107.950 1570000 0.44 1.53 2.28 233000 176000 406000 1.33
14.0000 20.2500 6.1250 4.2500 352000 52400 39500 91200
355.600 514.350 193.675 152.400 2300000 0.37 1.84 2.74 343000 216000 598000 1.59
14.0000 20.2500 7.6250 6.0000 518000 77200 48500 134000
361.950 477.838 138.112 103.188 1730000 0.47 1.43 2.12 257000 208000 448000 1.24
14.2500 18.8125 5.4375 4.0625 389000 57900 46900 101000
368.250 523.875 214.312 169.862 3380000 0.33 2.03 3.02 504000 287000 877000 1.76
14.4980 20.6250 8.4375 6.6875 760000 113000 64500 197000
371.475 501.650 155.575 107.950 1570000 0.44 1.53 2.28 233000 176000 406000 1.33
14.6250 19.7500 6.1250 4.2500 352000 52400 39500 91200
371.475 514.350 155.575 107.950 1570000 0.44 1.53 2.28 233000 176000 406000 1.33
14.6250 20.2500 6.1250 4.2500 352000 52400 39500 91200
381.000 590.550 244.475 193.675 4250000 0.33 2.03 3.02 633000 360000 1100000 1.76
15.0000 23.2500 9.6250 7.6250 955000 142000 81000 248000
385.762 514.350 177.800 139.700 2310000 0.42 1.61 2.40 344000 246000 599000 1.40
15.1875 20.2500 7.0000 5.5000 519000 77300 55400 135000
393.700 539.750 142.875 101.600 1620000 0.48 1.42 2.11 241000 196000 419000 1.23
15.5000 21.2500 5.6250 4.0000 363000 54100 44100 94200
393.700 558.800 146.050 104.775 1620000 0.48 1.42 2.11 241000 196000 419000 1.23
15.5000 22.0000 5.7500 4.1250 363000 54100 44100 94200
406.400 539.750 142.875 101.600 1620000 0.48 1.42 2.11 241000 196000 419000 1.23
16.0000 21.2500 5.6250 4.0000 363000 54100 44100 94200
406.400 558.800 146.050 104.775 1620000 0.48 1.42 2.11 241000 196000 419000 1.23
16.0000 22.0000 5.7500 4.1250 363000 54100 44100 94200
406.400 762.000 368.300 222.250 7140000 0.94 0.72 1.07 1060000 1710000 1850000 0.62
16.0000 30.0000 14.5000 8.7500 1610000 239000 384000 416000
415.925 590.550 244.475 193.675 4250000 0.33 2.03 3.02 633000 360000 1100000 1.76
16.3750 23.2500 9.6250 7.6250 955000 142000 81000 248000
430.212 603.250 159.639 104.775 1680000 0.52 1.29 1.92 250000 224000 435000 1.11
16.9375 23.7500 6.2850 4.1250 377000 56100 50400 97700
431.800 603.250 159.639 104.775 1680000 0.52 1.29 1.92 250000 224000 435000 1.11
17.0000 23.7500 6.2850 4.1250 377000 56100 50400 97700
431.902 685.698 365.125 295.275 7920000 0.32 2.08 3.09 1180000 656000 2050000 1.80
17.0040 26.9960 14.3750 11.6250 1780000 265000 147000 462000
457.200 596.900 165.100 120.650 2100000 0.40 1.67 2.48 313000 217000 546000 1.44
18.0000 23.5000 6.5000 4.7500 473000 70500 48800 123000
457.200 730.148 254.000 177.800 4820000 0.39 1.72 2.56 718000 483000 1250000 1.49
18.0000 28.7460 10.0000 7.0000 1080000 161000 109000 281000
488.950 634.873 180.975 136.525 2770000 0.47 1.43 2.12 412000 334000 718000 1.24
19.2500 24.9950 7.1250 5.3750 622000 92700 75000 161000
549.275 692.150 174.625 136.525 2590000 0.38 1.79 2.67 386000 249000 672000 1.55
21.6250 27.2500 6.8750 5.3750 583000 86800 55900 151000
558.800 736.600 165.100 114.300 2390000 0.51 1.33 1.98 356000 310000 619000 1.15
22.0000 29.0000 6.5000 4.5000 537000 80000 69600 139000
558.800 736.600 225.425 177.800 4390000 0.35 1.95 2.90 653000 387000 1140000 1.69
22.0000 29.0000 8.8750 7.0000 987000 147000 87100 256000
711.200 914.400 190.500 139.700 3550000 0.38 1.77 2.64 529000 344000 920000 1.54
28.0000 36.0000 7.5000 5.5000 798000 119000 77400 207000
723.900 914.400 187.325 139.700 3550000 0.38 1.77 2.64 529000 344000 920000 1.54
28.5000 36.0000 7.3750 5.5000 798000 119000 77400 207000
723.900 977.900 187.325 139.700 3550000 0.38 1.77 2.64 529000 344000 920000 1.54
28.5000 38.5000 7.3750 5.5000 798000 119000 77400 207000
723.900 1003.300 187.325 139.700 3550000 0.38 1.77 2.64 529000 344000 920000 1.54
28.5000 39.5000 7.3750 5.5000 798000 119000 77400 207000
1784.350 2006.600 241.300 177.800 8250000 0.44 1.54 2.29 1230000 924000 2140000 1.33
70.2500 79.0000 9.5000 7.0000 1850000 276000 208000 481000
B
Caption:
Caption:
T
C
.
g
i
F
1
s
D
x
i
f
f
u
a
r
r
e
t
u
o
c
e
i
w
h
t
n
a
c
i
r
b
u
l
t
s
e
l
o
h
d
n
a
v
o
o
r g
e
d D
Ka
Kb
g
n
i
k
c
o
L
r
o
f
n
i
p
D
C
e
c
a
r
r
e
t
u
o
g
i
F
.
2
x
i
f
f
u
s
D
C
e
c
a
r
r
e
t
u
o
r
b
u
l
h
t
i
w
i
s
e
l
o
h
t
n
a
c
d
n a
.
e
v
o
o
r
g
e
l
o
h
t
n
a
c
i
r
b
u
l
e
n
O
c
o
l
r
o
f
d
e
r
o
b
r
e
t
n
u o
c
i
k
n
g
p
n
i
Ka
Kb
g
n
i
k
c
o
L
f
n
i p
r
o
C
D
e
t
u
o
r
c
a
r
e
.
g
i
F
3
s
C
D
x
i
f
f
u
o
t
u
r
e
r
e
c
a
w
h
t
i
e
n
o
u
l
t
n
a
c
i
r
b
h
e
l
o
-
n
u
o
c
o
f
d
e
r
o
b
r
e
t
i
k
c
o
l r
n
g
i
p
n
r
R
db Da
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) If a spacer with provision for lubricant passage is required, consult your Timken representative.
•
B294 TIMKEN PRODUCTS CATALOG
Tapered - Type TDO
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
Pin
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4) R(3) db r(3) Da Ka Kb G1 G2 Cg
EE231400 232026D X1S-231401
EE333140 333203CD X1S-333140
LM763848 LM763811DC LM763848XA
HM265049 HM265010CD HM265049XC
EE231462 231976CD X2S-231462
EE231462 232026D X1S-231462
M268730 M268710CD M268730XA
LM665949 LM665910CD LM665949XB
EE234154 234213CD X3S-234154
EE234154 234221D X1S-234154
EE234160 234213CD X1S-234160
EE234160 234221D X3S-234160
H969249 H969210D H969249XA
M268749 M268710CD M268749XE
EE241693 242377CD X2S-241693
EE241701 242377CD X2S-241701
EE650170 650270D X1S-650170
EE244180 244236CD X1S-244180
EE671801 672875D X1S-671801
LM772748 LM772710CD LM772748XB
L476549 L476510CD L476549XA
EE542220 542291CD X2S-542220
LM377449 LM377410CD LM377449XB
EE755280 755361CD X1S-755280
EE755285 755361CD X2S-755285
EE755285 755365CD
EE755285 755367CD X1S-755285
LL789849 LL789810D LL789849XA
6.4 388.0 1.5 481.0 2390 366 0.1874 92.55
0.25 15.28 0.06 18.94 204.04
6.4 387.0 1.5 478.5 28.4 11.7 3040 337 0.1928 117.25
0.25 15.24 0.06 18.83 1.12 0.46 258.50
B
3.3 383.0 1.5 461.5 22.1 7.1 2600 418 0.1980 59.39
0.13 15.08 0.06 18.16 0.87 0.28 130.93
6.4 400.0 1.5 498.5 28.4 11.7 4300 372 0.2106 140.91
0.25 15.75 0.06 19.63 1.12 0.46 310.64
6.4 400.0 1.5 481.0 22.1 11.7 2390 366 0.1874 72.19
0.25 15.75 0.06 18.94 0.87 0.46 159.14
6.4 400.0 1.5 481.0 2390 366 0.1874 82.88
0.25 15.75 0.06 18.94 182.71
Caption:
6.4 425.0 1.5 562.0 28.4 14.2 5750 421 0.2319 236.50
0.25 16.73 0.06 22.13 1.12 0.56 521.39
6.4 415.0 1.5 495.0 28.4 12.7 3740 480 0.2155 93.50
0.25 16.34 0.06 19.49 1.12 0.50 206.14
6.4 426.0 1.5 515.5 22.1 12.7 2780 448 0.2018 83.95
0.25 16.77 0.06 20.30 0.87 0.50 185.07
6.4 426.0 1.5 515.5 2780 448 0.2018 99.47
0.25 16.77 0.06 20.30 219.28
6.4 435.0 1.5 515.5 22.1 12.7 2780 448 0.2018 75.19
0.25 17.13 0.06 20.30 0.87 0.50 165.77
6.4 435.0 1.5 515.5 2780 448 0.2018 90.77
0.25 17.13 0.06 20.30 200.11
12.7 513.0 3.3 719.5 4610 207 0.2945 649.84
0.50 20.20 0.13 28.32 1432.63
6.4 451.0 1.5 562.0 28.4 14.2 5750 421 0.2319 205.00
0.25 17.76 0.06 22.13 1.12 0.56 451.94
6.4 465.0 1.5 561.0 22.1 13.5 3350 551 0.2207 121.97
0.25 18.31 0.06 22.09 0.87 0.53 268.90
6.4 466.0 1.5 561.0 22.1 13.5 3350 551 0.2207 121.18
0.25 18.35 0.06 22.09 0.87 0.53 267.15
6.4 477.0 3.3 648.5 7670 341 0.2542 484.91
0.25 18.78 0.13 25.53 1069.04
9.7 494.0 1.5 570.5 28.4 11.7 4410 627 0.2233 105.26
0.38 19.45 0.06 22.47 1.12 0.46 232.06
9.7 507.0 1.5 680.5 4970 343 0.2315 366.55
0.38 19.96 0.06 26.79 808.08
6.4 522.0 1.5 612.0 28.4 14.2 5450 602 0.2525 134.20
0.25 20.55 0.06 24.09 1.12 0.56 295.86
6.4 579.0 1.5 666.0 28.4 14.2 7260 889 0.2567 142.18
0.25 22.80 0.06 26.22 1.12 0.56 313.45
6.4 594.0 3.3 705.0 25.4 13.5 5730 782 0.2604 166.76
0.25 23.39 0.13 27.76 1.00 0.53 367.63
6.4 594.0 1.5 708.0 28.4 16.5 9310 907 0.2735 245.75
0.25 23.39 0.06 27.87 1.12 0.65 541.77
6.4 750.0 3.3 877.0 28.4 15.7 11100 1280 0.2952 292.59
0.25 29.53 0.13 34.53 1.12 0.62 645.04
5.5 756.0 3.3 877.0 28.4 15.7 11100 1280 0.2952 269.33
0.22 29.76 0.13 34.53 1.12 0.62 593.76
5.5 756.0 3.3 900.0 28.4 19.8 11100 1280 0.2952 344.62
0.22 29.76 0.13 35.43 1.12 0.78 759.74
5.5 756.0 3.3 912.0 28.4 19.8 11100 1280 0.2952 396.42
0.22 29.76 0.13 35.91 1.12 0.78 873.94
12.7 1840.0 3.3 1966.0 93400 10400 0.6160 937.57
0.50 72.44 0.13 77.40 2066.96
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B295
•
ROLLER BEARINGS
Caption:
NOTES
B
Caption:
•
B296 TIMKEN PRODUCTS CATALOG
Caption:
1 A
TAPERED ROLLER BEARINGS
• TDI style consists of a single piece (double) inner race plus two single outer races.
• Normally supplied complete with an outer race spacer as a pre-set assembly.
• To suit the application duty, the built-in setting value needs to be established by your Timken representative before an order
is placed.
• Groove and holes in the outer race spacer allow for lubricant passage from the bearing housing.
• To obtain a price quotation, specify the bearing and spacer part numbers.
Example: inner race outer race
17116D - 17244
Y3S - 17244 spacer
B
TDI
DOUBLE
INNER RACE
Caption:
Caption:
BEARING DATA TABLES
In the following bearing data tables, part numbers are listed in ascending order of bore, outside diameter and width.
Bearing ratings shown in tables are based on environmental reference conditions. Effects of known operating conditions on bearing performance in an application should be investigated before ?nal bearing selection is made.
Approximate mass is listed for every part number. For weight-critical applications or exact freight cost evaluation purposes, a more accurate value should be obtained from your Timken representative.
TIMKEN PRODUCTS CATALOG B297
•
Caption:
1
A
ROLLER BEARINGS
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
25.400 51.994 30.079 36.512 46900 0.40 1.68 2.50 6990 4810 12200 1.45
1.0000 2.0470 1.1842 1.4375 10500 1570 1080 2730
30.162 62.000 33.797 34.925 69700 0.38 1.77 2.63 10400 6800 18100 1.53
1.1875 2.4409 1.3306 1.3750 15700 2330 1530 4060
31.750 69.012 39.705 39.182 88000 0.38 1.77 2.63 13100 8570 22800 1.53
1.2500 2.7170 1.5632 1.5426 19800 2950 1930 5130
31.750 69.012 39.705 39.182 88000 0.38 1.77 2.63 13100 8570 22800 1.53
1.2500 2.7170 1.5632 1.5426 19800 2950 1930 5130
31.750 72.085 44.785 39.182 88000 0.38 1.77 2.63 13100 8570 22800 1.53
1.2500 2.8380 1.7632 1.5426 19800 2950 1930 5130
33.338 69.012 39.705 39.182 88000 0.38 1.77 2.63 13100 8570 22800 1.53
1.3125 2.7170 1.5632 1.5426 19800 2950 1930 5130
33.338 69.012 39.705 39.182 88000 0.38 1.77 2.63 13100 8570 22800 1.53
1.3125 2.7170 1.5632 1.5426 19800 2950 1930 5130
33.338 72.085 44.785 39.182 88000 0.38 1.77 2.63 13100 8570 22800 1.53
1.3125 2.8380 1.7632 1.5426 19800 2950 1930 5130
36.512 68.262 36.810 38.100 81700 0.44 1.52 2.26 12200 9260 21200 1.31
1.4375 2.6875 1.4492 1.5000 18400 2740 2080 4760
36.512 71.438 36.810 38.100 81700 0.44 1.52 2.26 12200 9260 21200 1.31
1.4375 2.8125 1.4492 1.5000 18400 2740 2080 4760
36.512 72.000 39.096 38.100 81700 0.44 1.52 2.26 12200 9260 21200 1.31
1.4375 2.8346 1.5392 1.5000 18400 2740 2080 4760
42.862 80.962 34.925 31.750 81900 0.53 1.28 1.90 12200 11000 21200 1.11
1.6875 3.1875 1.3750 1.2500 18400 2740 2480 4770
42.862 85.000 50.262 52.375 132000 0.31 2.20 3.28 19600 10300 34200 1.91
1.6875 3.3465 1.9788 2.0620 29700 4420 2320 7690
42.862 90.119 54.991 52.375 132000 0.31 2.20 3.28 19600 10300 34200 1.91
1.6875 3.5480 2.1650 2.0620 29700 4420 2320 7690
44.450 80.962 34.925 31.750 81900 0.53 1.28 1.90 12200 11000 21200 1.11
1.7500 3.1875 1.3750 1.2500 18400 2740 2480 4770
47.625 93.264 50.013 53.188 142000 0.34 1.99 2.97 21100 12200 36800 1.73
1.8750 3.6718 1.9690 2.0940 31900 4750 2750 8260
47.625 96.838 53.188 53.188 142000 0.34 1.99 2.97 21100 12200 36800 1.73
1.8750 3.8125 2.0940 2.0940 31900 4750 2750 8260
47.625 100.000 58.735 53.188 142000 0.34 1.99 2.97 21100 12200 36800 1.73
1.8750 3.9370 2.3124 2.0940 31900 4750 2750 8260
49.212 93.264 50.013 53.188 142000 0.34 1.99 2.97 21100 12200 36800 1.73
1.9375 3.6718 1.9690 2.0940 31900 4750 2750 8260
49.212 96.838 53.188 53.188 142000 0.34 1.99 2.97 21100 12200 36800 1.73
1.9375 3.8125 2.0940 2.0940 31900 4750 2750 8260
49.212 100.000 58.735 53.188 142000 0.34 1.99 2.97 21100 12200 36800 1.73
1.9375 3.9370 2.3124 2.0940 31900 4750 2750 8260
50.800 88.900 41.275 61.112 138000 0.32 2.11 3.14 20600 11300 35900 1.83
2.0000 3.5000 1.6250 2.4060 31100 4640 2540 8070
50.800 93.264 50.013 53.188 142000 0.34 1.99 2.97 21100 12200 36800 1.73
2.0000 3.6718 1.9690 2.0940 31900 4750 2750 8260
50.800 96.838 53.188 53.188 142000 0.34 1.99 2.97 21100 12200 36800 1.73
2.0000 3.8125 2.0940 2.0940 31900 4750 2750 8260
50.800 100.000 58.735 53.188 142000 0.34 1.99 2.97 21100 12200 36800 1.73
2.0000 3.9370 2.3124 2.0940 31900 4750 2750 8260
54.987 140.030 66.091 65.989 276000 0.87 0.78 1.16 41100 60900 71500 0.67
2.1649 5.5130 2.6020 2.5980 62000 9230 13700 16100
55.562 96.838 51.298 53.188 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.1875 3.8125 2.0196 2.0940 33000 4910 2980 8550
55.562 100.000 51.298 53.188 147000 0.35 1.91 2.84 21800 13200 38000 1.65
2.1875 3.9370 2.0196 2.0940 33000 4910 2980 8550
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) A groove and holes in the outer race spacer allow for lubricant passage from the bearing housing.
Factors (5) Dynamic (2) Dynamic (2) Factors (5)
TDI
DOUBLE
INNER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
B
Caption:
Caption:
T
B
d
D
r
da
Db
R
•
B298 TIMKEN PRODUCTS CATALOG
Tapers -Type TDI
1
A
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4)
R(3)
da
r(3)
Db G1 G2 Cg
07100D 07204
17116D 17244
14126D 14274
14126D 14276 Y2S-14276
14126D 14283
14134D 14274
14134D 14276
14134D 14283
19145D 19268
19145D 19281
19145D 19283
13169D 13318 Y2S-13318
358D 354A
358D 352
13176D 13318 Y1S-13318
376DE 374
376DE 372A
376DE 372
378DE 374
378DE 372A
378DE 372
368D 362A
375D 374 Y1S-374
375D 372A Y1S-372A
375D 372
78216D 78551
389DE 382A Y2S-382A
389DE 383A
0.8 30.0
1.3
45.0 7.6 6.99 0.0509 0.30
0.03
1.18
0.05
1.77
0.67
0.8 35.5
1.5
54.0 11.8 7.49 0.0579 0.46
0.03
1.40
0.06
2.13
1.02
B
1.5 40.0
3.3
59.0 18 9.4 0.0668 0.70
0.06
1.57
0.13
2.32
1.54
1.5 40.0
1.3
60.0 18 9.4 0.0668 0.71
0.06
1.57
0.05
2.36
1.57
1.5 40.0
2.3
60.0 18 9.4 0.0668 0.86
0.06
1.57
0.09
2.36
1.90
Caption:
1.5 41.0
3.3
59.0 18 9.4 0.0668 0.67
0.06
1.61
0.13
2.32
1.48
1.5 41.0
1.3
60.0 18 9.4 0.0668 0.69
0.06
1.61
0.05
2.36
1.51
1.5 41.0
2.3
60.0 18 9.4 0.0668 0.84
0.06
1.61
0.09
2.36
1.85
0.8 42.5
1.5
61.0 17.5 11.5 0.0694 0.60
0.03
1.67
0.06
2.40
1.32
0.8 42.5
1.0
63.0 17.5 11.5 0.0694 0.66
0.03
1.67
0.04
2.48
1.46
0.8 42.5
1.5
63.0 17.5 11.5 0.0694 0.72
0.03
1.67
0.06
2.48
1.58
0.8 50.0
1.5
72.0 23 15.4 0.0799 0.74
0.03
1.97
0.06
2.83
1.64
1.5 51.0
1.3
77.0 30 12.2 0.0732 1.27
0.06
2.01
0.05
3.03
2.79
1.5 51.0
2.3
78.0 30 12.2 0.0732 1.56
0.06
2.01
0.09
3.07
3.44
0.1 50.0
1.5
72.0 23 15.4 0.0799 0.72
0.01
1.97
0.06
2.83
1.58
0.8 55.0
1.3
85.0 37.6 15.4 0.0816 1.52
0.03
2.17
0.05
3.35
3.35
0.8 55.0
1.5
86.0 37.6 15.4 0.0816 1.73
0.03
2.17
0.06
3.39
3.82
0.8 55.0
2.0
86.0 37.6 15.4 0.0816 2.01
0.03
2.17
0.08
3.39
4.43
0.8 56.0
1.3
85.0 37.6 15.4 0.0816 1.47
0.03
2.20
0.05
3.35
3.25
0.8 56.0
1.5
86.0 37.6 15.4 0.0816 1.69
0.03
2.20
0.06
3.39
3.72
0.8 56.0
2.0
86.0 37.6 15.4 0.0816 1.96
0.03
2.20
0.08
3.39
4.33
0.8 57.0
1.3
81.0 33.8 12.5 0.0773 1.22
0.03
2.24
0.05
3.19
2.68
0.8 57.0
1.3
85.0 37.6 15.4 0.0816 1.40
0.03
2.24
0.05
3.35
3.09
0.8 57.0
1.5
86.0 37.6 15.4 0.0816 1.61
0.03
2.24
0.06
3.39
3.56
0.8 57.0
2.0
86.0 37.6 15.4 0.0816 1.89
0.03
2.24
0.08
3.39
4.17
2.3 79.0
2.3 117.0 62.6 19.1 0.0884 5.19
0.09
3.11
0.09
4.61
11.45
0.8 62.0
0.8
89.0 42 15.7 0.0859 2.04
0.03
2.44
0.03
3.50
4.50
0.8 62.0
2.0
89.0 42 15.7 0.0859 1.59
0.03
2.44
0.08
3.50
3.49
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B299
•
Caption:
1
A
ROLLER BEARINGS
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
61.912 110.000 55.550 55.550 159000 0.40 1.68 2.50 23700 16300 41300 1.45
2.4375 4.3307 2.1870 2.1870 35800 5340 3670 9290
61.912 110.000 55.550 55.550 159000 0.40 1.68 2.50 23700 16300 41300 1.45
2.4375 4.3307 2.1870 2.1870 35800 5340 3670 9290
63.500 112.712 60.325 60.325 269000 0.34 1.99 2.96 40100 23300 69800 1.72
2.5000 4.4375 2.3750 2.3750 60500 9010 5230 15700
63.500 136.525 66.091 65.989 276000 0.87 0.78 1.16 41100 60900 71500 0.67
2.5000 5.3750 2.6020 2.5980 62000 9230 13700 16100
63.500 140.030 66.091 65.989 276000 0.87 0.78 1.16 41100 60900 71500 0.67
2.5000 5.5130 2.6020 2.5980 62000 9230 13700 16100
64.987 136.525 66.091 65.989 276000 0.87 0.78 1.16 41100 60900 71500 0.67
2.5586 5.3750 2.6020 2.5980 62000 9230 13700 16100
64.987 140.030 66.091 65.989 276000 0.87 0.78 1.16 41100 60900 71500 0.67
2.5586 5.5130 2.6020 2.5980 62000 9230 13700 16100
80.962 133.350 60.325 59.538 249000 0.44 1.52 2.26 37100 28200 64600 1.31
3.1875 5.2500 2.3750 2.3440 56000 8330 6340 14500
80.962 136.525 60.325 59.538 249000 0.44 1.52 2.26 37100 28200 64600 1.31
3.1875 5.3750 2.3750 2.3440 56000 8330 6340 14500
80.962 139.992 80.962 80.134 333000 0.40 1.67 2.49 49600 34300 86400 1.45
3.1875 5.5115 3.1875 3.1549 75000 11200 7720 19400
84.138 133.350 76.200 75.413 249000 0.44 1.52 2.26 37100 28200 64600 1.31
3.3125 5.2500 3.0000 2.9690 56000 8330 6340 14500
84.138 136.525 76.200 75.413 249000 0.44 1.52 2.26 37100 28200 64600 1.31
3.3125 5.3750 3.0000 2.9690 56000 8330 6340 14500
85.725 123.825 41.278 44.450 149000 0.33 2.05 3.05 22200 12600 38700 1.77
3.3750 4.8750 1.6251 1.7500 33600 5000 2820 8700
85.725 127.000 41.278 44.450 149000 0.33 2.05 3.05 22200 12600 38700 1.77
3.3750 5.0000 1.6251 1.7500 33600 5000 2820 8700
88.900 161.925 101.549 107.950 528000 0.34 1.98 2.95 78500 45900 137000 1.71
3.5000 6.3750 3.9980 4.2500 119000 17700 10300 30700
88.900 168.275 101.549 107.950 528000 0.34 1.98 2.95 78500 45900 137000 1.71
3.5000 6.6250 3.9980 4.2500 119000 17700 10300 30700
92.075 148.430 57.150 57.942 263000 0.49 1.37 2.04 39100 33000 68100 1.19
3.6250 5.8437 2.2500 2.2812 59000 8790 7410 15300
92.075 149.225 63.500 57.942 263000 0.49 1.37 2.04 39100 33000 68100 1.19
3.6250 5.8750 2.5000 2.2812 59000 8790 7410 15300
95.250 136.525 57.150 57.150 225000 0.28 2.38 3.54 33500 16300 58300 2.06
3.7500 5.3750 2.2500 2.2500 50600 7530 3660 13100
95.250 190.500 117.475 127.000 860000 0.33 2.02 3.00 128000 73400 223000 1.74
3.7500 7.5000 4.6250 5.0000 193000 28800 16500 50100
98.425 180.975 101.600 102.362 558000 0.39 1.75 2.61 83100 54800 145000 1.51
3.8750 7.1250 4.0000 4.0300 125000 18700 12300 32500
101.600 157.162 80.167 79.375 360000 0.47 1.42 2.12 53600 43600 93400 1.23
4.0000 6.1875 3.1562 3.1250 81000 12100 9800 21000
101.600 161.925 80.167 79.375 360000 0.47 1.42 2.12 53600 43600 93400 1.23
4.0000 6.3750 3.1562 3.1250 81000 12100 9800 21000
101.600 161.925 86.517 79.375 360000 0.47 1.42 2.12 53600 43600 93400 1.23
4.0000 6.3750 3.4062 3.1250 81000 12100 9800 21000
101.600 190.500 117.475 127.000 738000 0.33 2.02 3.00 110000 63000 191000 1.74
4.0000 7.5000 4.6250 5.0000 166000 24700 14200 43000
104.775 180.975 101.600 102.362 558000 0.39 1.75 2.61 83100 54800 145000 1.51
4.1250 7.1250 4.0000 4.0300 125000 18700 12300 32500
107.950 190.500 98.425 101.600 586000 0.42 1.62 2.42 87300 62200 152000 1.40
4.2500 7.5000 3.8750 4.0000 132000 19600 14000 34200
107.950 191.976 98.425 101.600 586000 0.42 1.62 2.42 87300 62200 152000 1.40
4.2500 7.5581 3.8750 4.0000 132000 19600 14000 34200
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) A groove and holes in the outer race spacer allow for lubricant passage from the bearing housing.
Factors (5) Dynamic (2) Dynamic (2) Factors (5)
TDI
DOUBLE
INNER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
B
Caption:
Caption:
T
B
d
D
r
da
Db
R
•
B300 TIMKEN PRODUCTS CATALOG
Tapers -Type TDI
1
A
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4)
R(3)
da
r(3)
Db G1 G2 Cg
399D 394A
399D 394AS
39585D 39520 Y8S-39520
78251D 78537 Y2S-78537
78251D 78551 Y1S-78551
78255D 78537 Y1S-78537
78255D 78551 Y3S-78551
496D 492A Y2S-492A
496D 493 Y4S-493
581D 572 Y5S-572
498D 492A Y3S-492A
498D 493 Y5S-493
L217845D L217810 L217810EA
L217845D L217813 L217813EA
767D 752 Y7S-752
767D 753
42362D 42584 Y3S-42584
42362D 42587
LM119348D LM119311 LM119311EA
HH221440D HH221410
779D 772 Y5S-772
52400D 52618 Y23S-52618
52400D 52637
52400D 52638 Y1S-52638
868D 854
782D 772 Y6S-772
71426D 71750
71426D 71753
0.8 70.0
1.3 101.0 56 21.4 0.0984 2.04
0.03
2.76
0.05
3.98
4.50
0.8 70.0
3.3
99.0 56 21.4 0.0984 2.01
0.03
2.76
0.13
3.90
4.44
B
0.8 72.0
3.3 101.0 84.3 23.7 0.1074 2.59
0.03
2.83
0.13
3.98
5.70
2.3 79.0
3.3 115.0 62.6 19.1 0.0884 4.49
0.09
3.11
0.13
4.53
9.90
2.3 79.0
2.3 117.0 62.6 19.1 0.0884 4.76
0.09
3.11
0.09
4.61
10.50
1.5 79.0
3.3 115.0 62.6 19.1 0.0884 4.48
0.06
3.11
0.13
4.53
9.89
Caption:
1.5 79.0
2.3 117.0 62.6 19.1 0.0884 4.75
0.06
3.11
0.09
4.61
10.48
1.5 91.0
3.3 120.0 105 29.3 0.1252 3.37
0.06
3.58
0.13
4.72
7.43
1.5 91.0
3.3 122.0 105 29.3 0.1252 3.52
0.06
3.58
0.13
4.80
7.77
1.5 92.0
3.3 125.0 126 32 0.1295 5.22
0.06
3.62
0.13
4.92
11.51
0.8 92.0
3.3 120.0 105 29.3 0.1252 3.68
0.03
3.62
0.13
4.72
8.11
0.8 92.0
3.3 122.0 105 29.3 0.1252 3.95
0.03
3.62
0.13
4.80
8.70
0.8 93.0
1.5 116.0 111 74.7 0.1152 1.72
0.03
3.66
0.06
4.57
3.80
0.8 93.0
1.5 117.0 111 74.7 0.1152 1.94
0.03
3.66
0.06
4.61
4.28
1.5 101.5
3.3 144.0 177 32.4 0.0945 8.76
0.06
3.99
0.13
5.67
19.32
1.5 101.5
3.3 147.0 177 32.4 0.0945 9.66
0.06
3.99
0.13
5.79
21.30
1.5 103.0
3.0 134.0 130 37.2 0.1386 3.84
0.06
4.06
0.12
5.28
8.48
1.5 103.0
3.3 134.0 130 37.2 0.1386 4.15
0.06
4.06
0.13
5.28
9.14
0.8 102.0
2.3 126.0 149 69 0.1213 2.71
0.03
4.02
0.09
4.96
5.97
6.4 116.0
3.3 171.0 266 30.7 0.1072 15.16
0.25
4.56
0.13
6.73
33.42
1.5 112.0
3.3 161.0 227 41.3 0.1067 11.34
0.06
4.41
0.13
6.34
25.01
1.5 112.5
3.3 142.0 175 41.7 0.1519 5.27
0.06
4.43
0.13
5.59
11.61
1.5 112.5
3.3 144.0 175 41.7 0.1519 7.48
0.06
4.43
0.13
5.67
16.50
1.5 112.5
3.3 143.0 175 41.7 0.1519 6.28
0.06
4.43
0.13
5.63
13.83
1.5 116.0
3.3 170.0 264 44.9 0.1072 23.29
0.06
4.57
0.13
6.69
51.35
1.5 118.0
3.3 161.0 227 41.3 0.1067 10.53
0.06
4.64
0.13
6.34
23.20
1.5 122.0
3.3 171.0 269 45.7 0.1156 12.30
0.06
4.80
0.13
6.73
27.11
1.5 122.0
3.3 172.0 269 45.7 0.1156 12.93
0.06
4.80
0.13
6.77
28.50
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B301
•
Caption:
1
A
ROLLER BEARINGS
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
107.950 212.725 142.875 152.400 922000 0.33 2.07 3.09 137000 76600 239000 1.79
4.2500 8.3750 5.6250 6.0000 207000 30900 17200 53700
114.300 190.500 98.425 101.600 586000 0.42 1.62 2.42 87300 62200 152000 1.40
4.5000 7.5000 3.8750 4.0000 132000 19600 14000 34200
114.300 212.725 142.875 152.400 1100000 0.33 2.07 3.09 163000 91000 284000 1.79
4.5000 8.3750 5.6250 6.0000 246000 36700 20500 63900
114.300 234.950 139.700 152.400 1010000 0.37 1.83 2.72 151000 95500 263000 1.58
4.5000 9.2500 5.5000 6.0000 228000 33900 21500 59100
114.300 247.650 139.700 152.400 1010000 0.37 1.83 2.72 151000 95500 263000 1.58
4.5000 9.7500 5.5000 6.0000 228000 33900 21500 59100
120.650 174.625 66.678 68.262 394000 0.33 2.03 3.02 58700 33400 102000 1.76
4.7500 6.8750 2.6251 2.6875 88600 13200 7510 23000
120.650 234.950 139.700 152.400 1010000 0.37 1.83 2.72 151000 95500 263000 1.58
4.7500 9.2500 5.5000 6.0000 228000 33900 21500 59100
120.650 247.650 139.700 152.400 1010000 0.37 1.83 2.72 151000 95500 263000 1.58
4.7500 9.7500 5.5000 6.0000 228000 33900 21500 59100
127.000 196.850 92.075 92.075 593000 0.34 1.96 2.92 88200 52000 154000 1.70
5.0000 7.7500 3.6250 3.6250 133000 19800 11700 34500
127.000 228.600 160.338 151.244 606000 0.74 0.92 1.36 90200 114000 157000 0.79
5.0000 9.0000 6.3125 5.9545 136000 20300 25600 35300
127.000 234.950 139.700 152.400 1010000 0.37 1.83 2.72 151000 95500 263000 1.58
5.0000 9.2500 5.5000 6.0000 228000 33900 21500 59100
127.000 247.650 139.700 152.400 1010000 0.37 1.83 2.72 151000 95500 263000 1.58
5.0000 9.7500 5.5000 6.0000 228000 33900 21500 59100
130.005 215.900 123.825 123.825 616000 0.49 1.38 2.06 91700 76500 160000 1.20
5.1183 8.5000 4.8750 4.8750 138000 20600 17200 35900
130.005 217.488 123.825 123.825 616000 0.49 1.38 2.06 91700 76500 160000 1.20
5.1183 8.5625 4.8750 4.8750 138000 20600 17200 35900
130.175 215.900 101.600 101.600 616000 0.49 1.38 2.06 91700 76500 160000 1.20
5.1250 8.5000 4.0000 4.0000 138000 20600 17200 35900
130.175 217.488 101.600 101.600 616000 0.49 1.38 2.06 91700 76500 160000 1.20
5.1250 8.5625 4.0000 4.0000 138000 20600 17200 35900
133.350 196.850 92.075 92.075 593000 0.34 1.96 2.92 88200 52000 154000 1.70
5.2500 7.7500 3.6250 3.6250 133000 19800 11700 34500
133.350 203.200 92.075 92.075 593000 0.34 1.96 2.92 88200 52000 154000 1.70
5.2500 8.0000 3.6250 3.6250 133000 19800 11700 34500
136.525 190.500 77.788 77.788 456000 0.32 2.10 3.13 67900 37300 118000 1.82
5.3750 7.5000 3.0625 3.0625 103000 15300 8390 26600
136.525 225.425 120.650 120.650 1040000 0.33 2.03 3.02 155000 88400 270000 1.76
5.3750 8.8750 4.7500 4.7500 234000 34900 19900 60800
149.225 236.538 106.362 105.346 830000 0.44 1.53 2.27 124000 93600 215000 1.32
5.8750 9.3125 4.1875 4.1475 187000 27800 21000 48400
149.225 241.300 106.362 105.346 830000 0.44 1.53 2.27 124000 93600 215000 1.32
5.8750 9.5000 4.1875 4.1475 187000 27800 21000 48400
149.225 254.000 120.650 120.650 1060000 0.41 1.66 2.47 158000 110000 276000 1.43
5.8750 10.0000 4.7500 4.7500 239000 35600 24800 62000
152.400 244.475 87.312 92.075 648000 0.35 1.92 2.86 96400 58100 168000 1.66
6.0000 9.6250 3.4375 3.6250 146000 21700 13100 37700
155.575 247.650 122.238 122.238 1080000 0.37 1.83 2.73 161000 101000 280000 1.59
6.1250 9.7500 4.8125 4.8125 243000 36100 22800 62900
165.100 225.425 79.375 76.200 489000 0.38 1.76 2.62 72800 47800 127000 1.52
6.5000 8.8750 3.1250 3.0000 110000 16400 10700 28500
174.625 288.925 123.825 123.825 1330000 0.32 2.12 3.15 198000 108000 344000 1.83
6.8750 11.3750 4.8750 4.8750 299000 44500 24300 77400
177.800 247.650 90.488 90.488 653000 0.44 1.54 2.29 97200 73200 169000 1.33
7.0000 9.7500 3.5625 3.5625 147000 21900 16500 38100
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) A groove and holes in the outer race spacer allow for lubricant passage from the bearing housing.
Factors (5) Dynamic (2) Dynamic (2) Factors (5)
TDI
DOUBLE
INNER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
B
Caption:
Caption:
T
B
d
D
r
da
Db
R
•
B302 TIMKEN PRODUCTS CATALOG
Tapers -Type TDI
1
A
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4)
R(3)
da
r(3)
Db G1 G2 Cg
946D 932 Y9S-932
71450D 71750 Y7S-71750
HH224346DD HH224310 HH224310EA
95451D 95925
95451D 95975
M224749D M224710 M224710EA
95474D 95925
95474D 95975
67388D 67322 Y1S-67322
97500D 97900 Y3S-97900
95499D 95925 Y4S-95925
95499D 95975
74510D 74850 Y5S-74850
74510D 74856
74512D 74850 Y7S-74850
74512D 74856
67390D 67322 Y1S-67322
67390D 67320
48393D 48320
H228649D H228610 H228610EB
82587D 82931 Y1S-82931
82587D 82950 Y5S-82950
99587D 99100 Y18S-99100
81601D 81962 Y1S-81963
H432549D H432510 H432510EA
46790D 46720 Y5S-46720
HM237542D HM237510 HM237510EA
67790D 67720 Y2S-67720
3.3 128.0
3.3 187.0 339 43.8 0.1153 22.36
0.13
5.04
0.13
7.36
49.30
1.5 128.0
3.3 171.0 269 49.5 0.1156 11.00
0.06
5.04
0.13
6.73
24.25
B
3.3 133.0
3.3 192.0 367 47.8 0.1182 21.93
0.13
5.24
0.13
7.56
48.35
13.2 153.0
3.3 209.0 454 59.3 0.1323 28.51
0.52
6.03
0.13
8.23
62.84
13.2 153.0
3.3 214.0 454 59.3 0.1323 34.69
0.52
6.03
0.13
8.43
76.47
Caption:
0.8 129.0
1.5 162.0 279 86.6 0.1575 5.82
0.03
5.08
0.06
6.38
12.83
6.4 149.0
3.3 209.0 454 59.3 0.1323 27.14
0.25
5.87
0.13
8.23
59.83
6.4 149.0
3.3 214.0 454 59.3 0.1323 33.32
0.25
5.87
0.13
8.43
73.46
1.5 140.0
3.3 180.0 384 70.1 0.1220 10.63
0.06
5.51
0.13
7.09
23.44
1.5 144.0
3.3 197.0 237 44.6 0.1311 24.43
0.06
5.67
0.13
7.76
53.85
5.0 152.0
3.3 209.0 454 59.3 0.1323 25.94
0.20
5.98
0.13
8.23
57.18
5.0 152.0
3.3 214.0 454 59.3 0.1323 31.93
0.20
5.98
0.13
8.43
70.38
1.5 146.0
3.3 196.0 363 68.5 0.1338 17.54
0.06
5.75
0.13
7.72
38.66
1.5 146.0
3.3 197.0 363 68.5 0.1338 17.32
0.06
5.75
0.13
7.76
38.18
1.5 146.0
3.3 196.0 363 68.5 0.1338 15.05
0.06
5.75
0.13
7.72
33.17
1.5 146.0
3.3 197.0 363 68.5 0.1338 15.44
0.06
5.75
0.13
7.76
34.04
1.5 145.0
3.3 180.0 384 70.1 0.1220 9.69
0.06
5.71
0.13
7.09
21.37
1.5 145.0
3.3 183.0 384 70.1 0.1220 12.12
0.06
5.71
0.13
7.20
26.72
1.5 144.0
3.3 177.0 404 105 0.1209 6.86
0.06
5.67
0.13
6.97
15.11
1.5 152.0
3.3 203.0 540 76.7 0.1358 19.61
0.06
5.98
0.13
7.99
43.22
1.5 165.0
3.3 213.0 460 81.1 0.1405 17.53
0.06
6.50
0.13
8.39
38.65
1.5 165.0
3.3 215.0 460 81.1 0.1405 19.15
0.06
6.50
0.13
8.46
42.22
1.5 167.0
3.3 227.0 556 73.5 0.1459 25.91
0.06
6.57
0.13
8.94
57.12
1.5 166.0
3.3 225.0 413 98.4 0.1250 14.89
0.06
6.54
0.13
8.86
32.82
1.5 172.0
3.3 224.0 658 97.7 0.1178 23.65
0.06
6.77
0.13
8.82
52.15
0.8 175.0
3.3 209.0 572 175 0.1432 9.38
0.03
6.89
0.13
8.23
20.68
1.5 191.0
3.3 266.0 751 101 0.1168 31.74
0.06
7.52
0.13
10.47
69.98
1.5 190.0
3.3 229.0 622 122 0.1214 13.31
0.06
7.48
0.13
9.02
29.35
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B303
•
Caption:
1
A
ROLLER BEARINGS
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
177.800 279.400 112.710 112.712 911000 0.52 1.29 1.92 136000 122000 236000 1.11
7.0000 11.0000 4.4374 4.4375 205000 30500 27400 53100
177.800 288.925 123.825 123.825 1060000 0.47 1.44 2.15 159000 127000 276000 1.25
7.0000 11.3750 4.8750 4.8750 239000 35600 28600 62000
177.800 288.925 123.825 123.825 1330000 0.32 2.12 3.15 198000 108000 344000 1.83
7.0000 11.3750 4.8750 4.8750 299000 44500 24300 77400
177.800 288.925 158.750 158.750 1330000 0.32 2.12 3.15 198000 108000 344000 1.83
7.0000 11.3750 6.2500 6.2500 299000 44500 24300 77400
177.800 304.800 109.438 114.300 1030000 0.36 1.87 2.79 153000 94500 267000 1.62
7.0000 12.0000 4.3086 4.5000 231000 34500 21200 60000
187.325 319.964 168.275 161.925 1790000 0.32 2.12 3.15 267000 145000 464000 1.83
7.3750 12.5970 6.6250 6.3750 402000 59900 32700 104000
187.325 320.675 168.275 161.925 1790000 0.32 2.12 3.15 267000 145000 464000 1.83
7.3750 12.6250 6.6250 6.3750 402000 59900 32700 104000
190.500 317.500 133.350 133.350 1180000 0.52 1.29 1.92 175000 157000 306000 1.12
7.5000 12.5000 5.2500 5.2500 265000 39500 35300 68700
190.500 317.500 142.875 133.350 1180000 0.52 1.29 1.92 175000 157000 306000 1.12
7.5000 12.5000 5.6250 5.2500 265000 39500 35300 68700
190.500 365.049 158.750 152.400 1880000 0.40 1.68 2.50 280000 193000 488000 1.45
7.5000 14.3720 6.2500 6.0000 423000 63000 43300 110000
190.500 368.300 158.750 152.400 1880000 0.40 1.68 2.50 280000 193000 488000 1.45
7.5000 14.5000 6.2500 6.0000 423000 63000 43300 110000
199.975 317.500 133.350 133.350 1180000 0.52 1.29 1.92 175000 157000 306000 1.12
7.8730 12.5000 5.2500 5.2500 265000 39500 35300 68700
199.975 317.500 142.875 133.350 1180000 0.52 1.29 1.92 175000 157000 306000 1.12
7.8730 12.5000 5.6250 5.2500 265000 39500 35300 68700
203.200 317.500 123.825 123.825 1180000 0.52 1.29 1.92 175000 157000 306000 1.12
8.0000 12.5000 4.8750 4.8750 265000 39500 35300 68700
203.200 317.500 133.350 133.350 1180000 0.52 1.29 1.92 175000 157000 306000 1.12
8.0000 12.5000 5.2500 5.2500 265000 39500 35300 68700
203.200 317.500 142.875 133.350 1180000 0.52 1.29 1.92 175000 157000 306000 1.12
8.0000 12.5000 5.6250 5.2500 265000 39500 35300 68700
203.200 365.049 158.750 152.400 1880000 0.40 1.68 2.50 280000 193000 488000 1.45
8.0000 14.3720 6.2500 6.0000 423000 63000 43300 110000
203.200 368.300 158.750 152.400 1880000 0.40 1.68 2.50 280000 193000 488000 1.45
8.0000 14.5000 6.2500 6.0000 423000 63000 43300 110000
206.375 282.575 87.312 87.312 684000 0.51 1.33 1.97 102000 88700 177000 1.15
8.1250 11.1250 3.4375 3.4375 154000 22900 19900 39800
206.375 336.550 180.975 184.150 2180000 0.33 2.03 3.02 325000 185000 566000 1.76
8.1250 13.2500 7.1250 7.2500 491000 73100 41600 127000
215.900 355.600 127.000 130.175 1220000 0.59 1.14 1.70 182000 184000 317000 0.99
8.5000 14.0000 5.0000 5.1250 275000 41000 41400 71300
219.075 358.775 196.850 200.025 2470000 0.33 2.03 3.02 367000 209000 639000 1.76
8.6250 14.1250 7.7500 7.8750 555000 82600 47000 144000
228.600 355.600 120.650 120.650 1360000 0.33 2.04 3.04 202000 114000 352000 1.77
9.0000 14.0000 4.7500 4.7500 306000 45500 25700 79200
228.600 355.600 120.650 120.650 1360000 0.33 2.04 3.04 202000 114000 352000 1.77
9.0000 14.0000 4.7500 4.7500 306000 45500 25700 79200
228.600 400.050 139.700 139.700 1900000 0.31 2.19 3.25 283000 150000 493000 1.89
9.0000 15.7500 5.5000 5.5000 428000 63700 33700 111000
234.950 384.175 209.550 209.550 2860000 0.33 2.03 3.02 426000 242000 741000 1.76
9.2500 15.1250 8.2500 8.2500 643000 95700 54500 167000
241.224 355.600 107.950 107.950 1130000 0.35 1.91 2.85 168000 101000 292000 1.65
9.4970 14.0000 4.2500 4.2500 253000 37700 22800 65700
254.000 355.600 92.710 92.862 956000 0.36 1.86 2.77 142000 88500 248000 1.61
10.0000 14.0000 3.6500 3.6560 215000 32000 19900 55700
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) A groove and holes in the outer race spacer allow for lubricant passage from the bearing housing.
Factors (5) Dynamic (2) Dynamic (2) Factors (5)
TDI
DOUBLE
INNER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
B
Caption:
Caption:
T
B
d
D
r
da
Db
R
•
B304 TIMKEN PRODUCTS CATALOG
Tapers -Type TDI
1
A
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4)
R(3)
da
r(3)
Db G1 G2 Cg
82680D 82620 Y1S-82620
94706D 94113 Y7S-94113
HM237546D HM237510 HM237510EF
HM237546DD HM237510
EE280700D 281200 Y1S-281200
H239649D H239610 H239610EA
H239649D H239612 H239612EE
93751D 93125 Y1S-93126
93751D 93126
EE420750D 421437
EE420750D 421450 Y4S-421450
93788D 93125 Y15S-93125
93788D 93126
93800D 93125 Y11S-93125
93801D 93125 Y1S-93126
93801D 93126 Y1S-93126
EE420800D 421437 Y1S-421437
EE420800D 421450
67985D 67920 Y1S-67920
H242649D H242610 H242610EA
96851D 96140 Y4S-96140
H244849D H244810 H244810EA
EE130900D 131400 Y5S-131400
EE130901D 131400
EE529091D 529157
H247549D H247510 H247510EA
EE127094D 127140
EE171000D 171400 Y1S-171400
1.5 195.0
3.3 251.0 661 119 0.1313 26.31
0.06
7.68
0.13
9.88
57.99
1.5 195.0
3.3 259.0 692 93.8 0.1287 32.48
0.06
7.68
0.13
10.20
71.61
B
1.5 194.0
3.3 266.0 751 101 0.1168 30.92
0.06
7.64
0.13
10.47
68.17
1.5 194.0
3.3 266.0 751 101 0.1168 36.67
0.06
7.64
0.13
10.47
80.84
3.3 200.0
3.3 279.0 591 86 0.1115 31.88
0.13
7.87
0.13
10.98
70.29
Caption:
3.3 209.0
4.8 293.0 906 90.3 0.1242 52.48
0.13
8.23
0.19
11.54
115.70
3.3 209.0
4.8 293.0 906 90.3 0.1242 53.02
0.13
8.23
0.19
11.54
116.90
6.4 222.0
3.3 286.0 912 126 0.1460 41.77
0.25
8.74
0.13
11.26
92.09
6.4 222.0
3.3 285.0 912 126 0.1460 43.57
0.25
8.74
0.13
11.22
96.06
3.3 221.0
3.3 329.0 1150 128 0.1450 76.29
0.13
8.70
0.13
12.95
168.18
3.3 221.0
3.3 331.0 1150 128 0.1450 76.88
0.13
8.70
0.13
13.03
169.49
6.4 227.0
3.3 286.0 912 126 0.1460 46.94
0.25
8.93
0.13
11.26
103.49
6.4 227.0
3.3 285.0 912 126 0.1460 40.54
0.25
8.93
0.13
11.22
89.37
1.5 222.0
3.3 286.0 912 126 0.1460 42.43
0.06
8.74
0.13
11.26
93.53
6.4 227.0
3.3 286.0 912 126 0.1460 37.13
0.25
8.93
0.13
11.26
81.85
6.4 227.0
3.3 285.0 912 126 0.1460 38.93
0.25
8.93
0.13
11.22
85.83
3.3 230.0
3.3 329.0 1150 128 0.1450 70.53
0.13
9.06
0.13
12.95
155.49
3.3 230.0
3.3 331.0 1150 128 0.1450 71.12
0.13
9.06
0.13
13.03
156.80
0.8 219.0
3.3 260.0 820 172 0.1388 16.46
0.03
8.62
0.13
10.24
36.29
1.5 227.0
3.3 306.0 1400 135 0.1465 64.57
0.06
8.94
0.13
12.05
142.36
6.4 249.0
3.3 318.0 1140 160 0.1626 50.93
0.25
9.80
0.13
12.52
112.27
1.5 242.0
6.4 323.0 1630 150 0.1540 83.42
0.06
9.53
0.25
12.72
183.91
1.5 247.0
1.5 329.0 1160 168 0.1358 43.36
0.06
9.72
0.06
12.95
95.59
5.5 255.0
1.5 329.0 1160 168 0.1358 46.82
0.22
10.04
0.06
12.95
103.22
3.3 256.0
3.3 367.0 1400 153 0.1415 73.75
0.13
10.08
0.13
14.45
162.60
1.5 259.0
6.4 346.0 1960 148 0.1638 97.43
0.06
10.20
0.25
13.62
214.79
1.5 257.0
3.3 327.0 1180 164 0.1392 36.32
0.06
10.12
0.13
12.87
80.08
1.5 269.0
3.3 334.0 1070 172 0.1354 27.99
0.06
10.59
0.13
13.15
61.70
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B305
•
Caption:
1
A
ROLLER BEARINGS
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
254.000 358.775 130.175 130.175 1560000 0.33 2.03 3.02 232000 132000 405000 1.76
10.0000 14.1250 5.1250 5.1250 351000 52200 29700 91000
254.000 365.049 92.710 92.862 956000 0.36 1.86 2.77 142000 88500 248000 1.61
10.0000 14.3720 3.6500 3.6560 215000 32000 19900 55700
254.000 368.300 92.710 92.862 956000 0.36 1.86 2.77 142000 88500 248000 1.61
10.0000 14.5000 3.6500 3.6560 215000 32000 19900 55700
260.350 365.125 107.950 107.950 1160000 0.37 1.80 2.69 173000 111000 301000 1.56
10.2500 14.3750 4.2500 4.2500 261000 38800 24900 67600
260.350 400.050 119.060 114.300 1410000 0.39 1.71 2.55 210000 142000 366000 1.48
10.2500 15.7500 4.6874 4.5000 318000 47300 31900 82300
269.875 381.000 136.525 136.525 1710000 0.33 2.03 3.02 255000 145000 443000 1.76
10.6250 15.0000 5.3750 5.3750 384000 57200 32600 99600
276.225 393.700 130.175 130.175 1510000 0.40 1.68 2.50 224000 154000 391000 1.45
10.8750 15.5000 5.1250 5.1250 339000 50400 34700 87800
276.225 406.400 122.240 130.175 1510000 0.40 1.68 2.50 224000 154000 391000 1.45
10.8750 16.0000 4.8126 5.1250 339000 50400 34700 87800
288.925 406.400 144.462 144.462 2030000 0.34 2.00 2.97 302000 175000 526000 1.73
11.3750 16.0000 5.6875 5.6875 457000 68000 39300 118000
300.038 422.275 150.812 150.812 2210000 0.34 2.00 2.99 330000 190000 574000 1.73
11.8125 16.6250 5.9375 5.9375 498000 74100 42700 129000
304.648 438.048 131.762 131.762 1880000 0.33 2.04 3.03 280000 159000 488000 1.76
11.9940 17.2460 5.1875 5.1875 423000 63000 35800 110000
304.648 438.048 131.762 131.762 1840000 0.33 2.04 3.03 274000 156000 478000 1.76
11.9940 17.2460 5.1875 5.1875 414000 61700 35000 107000
304.648 438.048 138.112 128.588 1880000 0.47 1.43 2.12 279000 226000 486000 1.24
11.9940 17.2460 5.4375 5.0625 422000 62800 50800 109000
304.800 495.300 137.952 134.938 2310000 0.40 1.68 2.50 343000 236000 598000 1.45
12.0000 19.5000 5.4312 5.3125 519000 77200 53100 134000
304.800 495.300 171.450 165.100 2510000 0.40 1.68 2.50 374000 257000 651000 1.45
12.0000 19.5000 6.7500 6.5000 564000 84000 57800 146000
317.500 447.675 158.750 158.750 2500000 0.33 2.02 3.00 372000 213000 647000 1.74
12.5000 17.6250 6.2500 6.2500 561000 83600 47900 145000
330.302 438.023 120.650 114.300 1250000 0.46 1.47 2.19 187000 146000 325000 1.27
13.0040 17.2450 4.7500 4.5000 282000 41900 32900 73000
346.075 488.950 174.625 174.625 2950000 0.33 2.02 3.00 439000 252000 765000 1.74
13.6250 19.2500 6.8750 6.8750 663000 98700 56600 172000
355.600 457.200 120.650 120.650 1610000 0.32 2.12 3.15 239000 131000 417000 1.83
14.0000 18.0000 4.7500 4.7500 361000 53800 29400 93600
393.700 546.100 141.288 120.650 1620000 0.48 1.42 2.11 241000 196000 419000 1.23
15.5000 21.5000 5.5625 4.7500 363000 54100 44100 94200
393.700 558.800 119.062 120.650 1620000 0.48 1.42 2.11 241000 196000 419000 1.23
15.5000 22.0000 4.6875 4.7500 363000 54100 44100 94200
406.400 590.550 193.675 193.675 3940000 0.33 2.08 3.09 587000 327000 1020000 1.80
16.0000 23.2500 7.6250 7.6250 886000 132000 73400 230000
449.949 594.949 178.000 178.000 3400000 0.33 2.03 3.02 507000 289000 882000 1.76
17.7145 23.4232 7.0079 7.0079 765000 114000 64900 198000
457.200 863.498 368.300 368.300 9200000 0.36 1.87 2.79 1370000 845000 2390000 1.62
18.0000 33.9960 14.5000 14.5000 2070000 308000 190000 536000
585.788 771.525 230.188 230.188 5620000 0.33 2.03 3.02 836000 476000 1460000 1.76
23.0625 30.3750 9.0625 9.0625 1260000 188000 107000 327000
595.312 844.550 296.862 296.862 8300000 0.33 2.03 3.02 1240000 704000 2150000 1.76
23.4375 33.2500 11.6875 11.6875 1870000 278000 158000 484000
660.400 812.800 176.212 176.213 4070000 0.33 2.03 3.02 606000 345000 1060000 1.76
26.0000 32.0000 6.9375 6.9375 915000 136000 77600 237000
682.625 965.200 338.138 338.138 10700000 0.33 2.03 3.02 1590000 903000 2760000 1.76
26.8750 38.0000 13.3125 13.3125 2400000 357000 203000 621000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) A groove and holes in the outer race spacer allow for lubricant passage from the bearing housing.
Factors (5) Dynamic (2) Dynamic (2) Factors (5)
TDI
DOUBLE
INNER RACE
d D T B C1 e Y1 Y2 C90 Ca90 C90(2) K
B
Caption:
Caption:
T
B
d
D
r
da
Db
R
•
B306 TIMKEN PRODUCTS CATALOG
Tapers -Type TDI
1
A
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4)
R(3)
da
r(3)
Db G1 G2 Cg
M249748D M249710 M249710EA
EE171000D 171436 Y2S-171436
EE171000D 171450 Y2S-171450
EE134102D 134143 Y1S-134143
EE221025D 221575
M252349D M252310 M252310EB
EE275109D 275155 Y1S-275155
EE275109D 275160
M255449D M255410 M255410EA
HM256849D HM256810 HM256810EA
EE329117D 329172 Y1S-329172
EE329119D 329172
M757447D M757410 M757410EA
EE941206D 941950
EE724121D 724195 Y1S-724195
HM259049D HM259010 HM259010EA
EE138131D 138172 Y1S-138172
HM262749D HM262710 HM262710EB
LM263149D LM263110 LM263110EA
EE234157D 234215
EE234157D 234220 Y1S-234220
EE833161XD 833232 Y1S-833232
M270449DA M270410 M270410EA
EE480181D 480340 Y2S-480340
LM278848D LM278810 LM278810EA
M280049D M280010
L281149D L281110 L281110EA
M282249D M282210 M282210EA
3.3 272.5
3.3 335.0 1630 168 0.1526 42.26
0.13
10.73
0.13
13.19
93.16
1.5 269.0
3.3 338.0 1070 172 0.1354 30.85
0.06
10.59
0.13
13.31
68.02
B
1.5 269.0
3.3 340.0 1070 172 0.1354 32.05
0.06
10.59
0.13
13.39
70.66
3.3 280.0
6.4 339.0 1330 187 0.1474 33.77
0.13
11.02
0.25
13.35
74.46
6.4 290.0
6.4 366.0 1320 207 0.1497 51.08
0.25
11.42
0.25
14.41
112.61
Caption:
3.3 290.0
3.3 356.0 1840 226 0.1588 49.31
0.13
11.42
0.13
14.02
108.70
1.5 293.5
6.4 366.0 1450 201 0.1555 49.64
0.06
11.56
0.25
14.41
109.44
1.5 293.5
6.4 373.0 1450 201 0.1555 65.71
0.06
11.56
0.25
14.69
144.87
3.3 310.0
3.3 379.0 2300 287 0.1722 58.31
0.13
12.20
0.13
14.92
128.54
3.3 322.0
3.3 394.0 2550 282 0.1779 66.34
0.13
12.68
0.13
15.51
146.25
3.3 327.0
3.3 410.0 2100 262 0.1651 61.46
0.13
12.87
0.13
16.14
135.49
3.3 327.0
3.3 410.0 2050 257 0.1638 62.83
0.13
12.87
0.13
16.14
138.51
3.3 328.0
4.8 407.0 1840 253 0.1775 64.12
0.13
12.91
0.19
16.02
141.35
1.5 329.0
3.3 459.0 1770 187 0.1657 97.13
0.06
12.95
0.13
18.07
214.13
3.3 334.0
6.4 450.0 2180 166 0.1783 124.80
0.13
13.15
0.25
17.72
275.14
3.3 340.0
3.3 418.0 2940 304 0.1863 78.83
0.13
13.39
0.13
16.46
173.78
1.5 347.0
3.3 412.0 1970 290 0.1786 46.18
0.06
13.66
0.13
16.22
101.82
3.3 371.0
3.3 456.0 3650 342 0.1999 105.90
0.13
14.61
0.13
17.95
233.47
1.5 372.0
3.3 434.0 3090 470 0.1845 50.39
0.06
14.65
0.13
17.09
111.09
3.3 420.0
6.4 504.0 2780 448 0.2018 93.77
0.13
16.54
0.25
19.84
206.72
3.3 420.0
6.4 516.0 2780 448 0.2018 95.13
0.13
16.54
0.25
20.31
209.73
3.3 435.0
6.4 549.0 4960 446 0.2186 175.96
0.13
17.13
0.25
21.61
387.92
3.0 474.0
6.0 561.0 6020 562 0.2343 130.94
0.12
18.66
0.24
22.09
288.68
6.4 516.0
6.4 780.0 7380 343 0.2575 935.42
0.25
20.31
0.25
30.71
2062.22
6.4 616.0
6.4 726.0 11600 784 0.2906 285.67
0.25
24.25
0.25
28.58
629.78
3.3 633.0
6.4 786.0 13600 704 0.3081 536.88
0.13
24.92
0.25
30.94
1183.60
3.3 683.0
6.4 777.0 12600 984 0.2968 195.70
0.13
26.88
0.25
30.59
431.45
3.3 723.0
6.4 900.0 18800 843 0.3426 808.16
0.13
28.46
0.25
35.43
1781.66
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Continued on next page.
TIMKEN PRODUCTS CATALOG B307
•
Caption:
1
ROLLER BEARINGS
Dimensions, mm (inches) Load Ratings, N (lbf.)
Dynamic (1)
Factors Dynamic (2) Dynamic (2) Factors (5)
TDI TWO-ROW
d D T B C(1) e Y(1) Y(2) C90 Ca90 C90(2) K
B
708.025 930.275 273.050 273.050 7910000 0.33 2.03 3.02 1180000 670000 2050000 1.76
27.8750 36.6250 10.7500 10.7500 1780000 265000 151000 461000
749.300 1066.800 361.950 349.250 12200000 0.33 2.05 3.05 1810000 1020000 3150000 1.77
29.5000 42.0000 14.2500 13.7500 2730000 407000 230000 709000
762.000 1295.400 311.153 311.150 12700000 0.38 1.76 2.62 1890000 1240000 3290000 1.52
30.0000 51.0000 12.2501 12.2500 2860000 425000 279000 741000
938.212 1270.000 400.050 400.050 15600000 0.33 2.03 3.02 2320000 1320000 4040000 1.76
36.9375 50.0000 15.7500 15.7500 3500000 521000 297000 907000
Caption:
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row,
C90(2) is the two-row radial value.
(3) These maximum ?llet radii will be cleared by the bearing corners.
(4) A groove and holes in the outer race spacer allow for lubricant passage from the bearing housing.
Caption:
T
D
B
d
r
R
da
Db
•
B308 TIMKEN PRODUCTS CATALOG
Tapers -Type TDI
Dimensions, mm (inches)
Factors
Weight
Part Number
Shaft
Housing
kg (lbs.)
max shaft backing max housing backing ?llet radius shoulder dia. ?llet radius shoulder dia.
Inner Outer Spacer (4)
R(3)
db
r(3)
Da G1 G2 Cg
LM282549D LM282510 LM282510EA
EE325296D 325420 Y1S-325420
EE433301D 433512
LM287649D LM287610 LM287610EA
3.3 741.0
6.4 879.0 18200 1090 0.3379 498.22
0.13
29.17
0.25
34.61
1098.37
9.2 806.5
12.7 996.0 21200 980 0.3551 1005.09
0.36
31.75
0.50
39.21
2215.80
B
6.4 852.0
6.4 1210.0 22200 957 0.3760 1703.94
0.25
33.54
0.25
47.64
3756.49
4.8 990.0
12.7 1190.0 37200 1610 0.4283 1474.36
0.19
38.98
0.50
46.85
3250.36
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
Caption:
TIMKEN PRODUCTS CATALOG B309
•
1
ROLLER BEARINGS
Caption:
NOTES
B
Caption:
•
B310 TIMKEN PRODUCTS CATALOG
Caption:
B B
IsoClassTM
TAPERED ROLLER BEARINGS -IsoClassTM METRIC 30000 SERIES BEARINGS
• Timken offers more than 170 part numbers in the 30000 Series, representing 95 percent of the market value for metric bearings.
• Part numbers give speci?ers the widest possible choice from the comprehensive range of metric (ISO and ‘J’ pre?x) and inch-sizes available.
• Consult your Timken representative before making a ?nal bearing selection to ensure suitability, availability and the most cost-effective application.
• To place an order or obtain a quotation, specify the inner and outer part numbers.
Example: inner race outer race
XAA32004X - YA32004X..
• In most ISO bearings, only one bearing number is speci?ed for both races:
Example:
30203
Conforms to the ISO 355 standard.
Caption:
Caption:
BEARING DATA TABLES
In the following bearing data tables, part numbers are listed in ascending order of bore, outside diameter and width.
Bearing ratings shown in tables are based on environmental reference conditions. Effects of known operating conditions on bearing performance in an application should be investigated before ?nal bearing selection is made.
Approximate mass is listed for every part number. For weight-critical applications or exact freight cost evaluation purposes, a more accurate value should be obtained from your Timken representative.
TIMKEN PRODUCTS CATALOG B311
•
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
Caption:
IsoClassTM
METRIC 30000
d D T C1 e Y C90 Ca90 K C0 Inner Outer
17.000 40.000 13.250 19800 0.35 1.74 5120 3030 1.69 19900
30203 30203
32004X 32004X
XAA32004X YAA32004X
30304 30304
32304 32304
XAA32005X YAA32005X
30205 30205
33205 33205
32305 32305
32006X 32006X
30206 30206
32206 32206
32206-B 32206-B
30306 30306
32306 32306
32007X 32007X
32207 32207
30307 30307
32008X 32008X
XAA32008X Y32008X
XAA33108 Y33108
32208 32208
33208 33208
30308 30308
31308 31308
XBA32308-B Y32308-B
32009X 32009X
XAA32009X Y32009X
0.6693 1.5748 0.5217 4440 1150 680 4460
20.000 42.000 15.000 25700 0.37 1.60 6660 4260 1.56 29400
B
0.7874 1.6535 0.5906 5770 1500 959 6600
20.000 42.000 15.000 25700 0.37 1.60 6660 4260 1.56 29400
0.7874 1.6535 0.5906 5770 1500 959 6600
20.000 52.000 16.250 35700 0.30 2.00 9250 4750 1.95 34500
0.7874 2.0472 0.6398 8020 2080 1070 7760
20.000 52.000 22.250 46400 0.30 2.00 12000 6180 1.95 48300
Caption:
0.7874 2.0472 0.8760 10400 2710 1390 10900
25.000 47.000 15.000 28500 0.43 1.39 7390 5440 1.36 35400
0.9843 1.8504 0.5906 6410 1660 1220 7950
25.000 52.000 16.250 31600 0.38 1.60 8190 5260 1.56 34400
0.9843 2.0472 0.6398 7100 1840 1180 7730
25.000 52.000 22.000 51100 0.35 1.71 13200 7950 1.66 63600
0.9843 2.0472 0.8661 11500 2980 1790 14300
25.000 62.000 25.250 67100 0.30 2.00 17400 8930 1.95 72400
T
C
0.9843 2.4409 0.9941 15100 3910 2010 16300
30.000 55.000 17.000 36300 0.43 1.39 9410 6930 1.36 45300
1.1811 2.1654 0.6693 8160 2120 1560 10200
30.000 62.000 17.250 45700 0.38 1.60 11800 7580 1.56 51800
D
1.1811 2.4409 0.6791 10300 2660 1710 11600
30.000 62.000 21.250 59400 0.38 1.60 15400 9890 1.56 71900
B
d
1.1811 2.4409 0.8366 13400 3460 2220 16200
30.000 62.000 21.250 51700 0.56 1.07 13400 12900 1.04 62300
1.1811 2.4409 0.8366 11600 3010 2900 14000
30.000 72.000 20.750 60600 0.32 1.90 15700 8470 1.85 61900
a
1.1811 2.8346 0.8169 13600 3530 1900 13900
30.000 72.000 28.750 81200 0.32 1.90 21000 11300 1.85 89800
1.1811 2.8346 1.1319 18200 4730 2550 20200
35.000 62.000 18.000 44100 0.45 1.32 11400 8890 1.29 57600
1.3780 2.4409 0.7087 9920 2570 2000 12900
35.000 72.000 24.250 69400 0.38 1.60 18000 11500 1.56 82300
1.3780 2.8346 0.9547 15600 4040 2600 18500
35.000 80.000 22.750 80500 0.32 1.90 20900 11300 1.85 86100
1.3780 3.1496 0.8957 18100 4690 2530 19400
40.000 68.000 19.000 51400 0.38 1.58 13300 8640 1.54 71600
1.5748 2.6772 0.7480 11600 3000 1940 16100
40.000 68.000 19.000 51400 0.38 1.58 13300 8640 1.54 71600
1.5748 2.6772 0.7480 11600 3000 1940 16100
40.000 75.000 26.000 81500 0.36 1.69 21100 12900 1.64 105000
1.5748 2.9528 1.0236 18300 4750 2890 23600
40.000 80.000 24.750 74900 0.38 1.60 19400 12500 1.56 86500
1.5748 3.1496 0.9744 16800 4370 2800 19400
40.000 80.000 32.000 112000 0.36 1.68 29000 17800 1.63 144000
1.5748 3.1496 1.2598 25200 6520 4000 32400
40.000 90.000 25.250 91500 0.35 1.74 23700 14000 1.69 102000
1.5748 3.5433 0.9941 20600 5330 3150 23000
40.000 90.000 25.250 79000 0.83 0.73 20500 28900 0.71 88100
1.5748 3.5433 0.9941 17800 4610 6510 19800
40.000 90.000 35.250 123000 0.55 1.10 31800 29700 1.07 160000
1.5748 3.5433 1.3878 27500 7140 6670 36100
45.000 75.000 20.000 61500 0.39 1.53 15900 10700 1.49 84300
1.7717 2.9528 0.7874 13800 3580 2410 19000
45.000 75.000 20.000 61500 0.39 1.53 15900 10700 1.49 84300
1.7717 2.9528 0.7874 13800 3580 2410 19000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B312 TIMKEN PRODUCTS CATALOG
Tapered - IsoClassTM Metric 30000 Series
Dimensions, mm (inches)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
Factors
Weight
kg (lbs.)
Bearing
Housing
Shaft
Cage
B C a(3) R(4) da db r (4) Da Db Aa Ab G1 G2 Cg
12.000 11.000 -3.6 1.0 21.0 22.0 1.0 37.0 35.0 0.10 1.60 4.2 5.96 0.0398 0.08
0.4724 0.4331 -0.14 0.04 0.83 0.87 0.04 1.46 1.38 0.00 0.06
0.18
15.000 12.000 -4.6 0.6 25.5 26.5 0.6 39.5 37.0 0.40 1.40 6.2 6.1 0.0469 0.10
0.5906 0.4724 -0.18 0.02 1.00 1.04 0.02 1.56 1.46 0.02 0.06
0.21
15.000 12.000 -4.6 2.0 25.5 29.0 1.0 39.5 36.5 0.40 1.40 6.2 6.1 0.0469 0.10
0.5906 0.4724 -0.18 0.08 1.00 1.14 0.04 1.56 1.44 0.02 0.06
0.21
15.000 13.000 -4.8 1.5 24.5 27.0 1.5 47.5 45.5 -0.60 2.60 7.5 5.5 0.0458 0.17
0.5906 0.5118 -0.19 0.06 0.96 1.06 0.06 1.87 1.79 -0.02 0.10
0.38
21.000 18.000 -8.4 1.5 26.0 28.0 1.5 47.5 44.5 0.90 2.20 9.3 5.73 0.0495 0.24
0.8268 0.7087 -0.33 0.06 1.02 1.10 0.06 1.87 1.75 0.04 0.09
0.52
15.000 11.500 -3.3 3.3 30.0 37.0 1.0 44.5 41.0 0.60 1.20 8.6 8.7 0.0546 0.11
0.5906 0.4528 -0.13 0.13 1.18 1.46 0.04 1.75 1.61 0.02 0.05
0.25
15.000 13.000 -3.6 1.0 30.5 32.0 1.0 48.5 46.0 0.4 1.60 8.4 6.21 0.0514 0.15
0.5906 0.5118 -0.14 0.04 1.20 1.26 0.04 1.91 1.81 0.02 0.06
0.34
22.000 18.000 -7.6 1.0 30.5 34.0 1.0 49.0 44.5 0.70 1.90 13.4 8.6 0.0594 0.22
0.8661 0.7087 -0.30 0.04 1.20 1.34 0.04 1.93 1.75 0.03 0.08
0.50
24.000 20.000 -9.7 1.5 31.5 35.0 1.5 57.0 54.0 2.20 2.30 15.1 5.58 0.0580 0.37
0.9449 0.7874 -0.38 0.06 1.24 1.38 0.06 2.24 2.13 0.09 0.09
0.81
17.000 13.000 -3.3 1.0 36.0 37.5 1.0 52.5 49.0 1.00 1.30 12.1 10.5 0.0611 0.17
0.6693 0.5118 -0.13 0.04 1.42 1.48 0.04 2.07 1.93 0.04 0.05
0.38
16.000 14.000 -3.6 1.0 36.5 38.0 1.0 58.0 55.0 0.20 2.30 13.4 10.7 0.0601 0.24
0.6299 0.5512 -0.14 0.04 1.44 1.50 0.04 2.28 2.17 0.01 0.09
0.52
20.000 17.000 -5.6 1.0 37.0 43.0 1.0 59.0 54.0 2.00 2.90 16.8 10.9 0.0652 0.29
0.7874 0.6693 -0.22 0.04 1.46 1.69 0.04 2.32 2.13 0.08 0.11
0.63
20.000 17.000 -3.3 1.0 36.5 39.5 1.0 59.0 53.0 1.60 2.80 14.1 8.92 0.0700 0.30
0.7874 0.6693 -0.13 0.04 1.44 1.56 0.04 2.32 2.09 0.06 0.11
0.65
19.000 16.000 -5.8 1.5 35.5 38.0 1.5 66.0 64.0 0.90 3.10 16.2 8.17 0.0600 0.39
0.7480 0.6299 -0.23 0.06 1.40 1.50 0.06 2.60 2.52 0.04 0.12
0.87
27.000 23.000 -10.7 1.5 37.0 40.5 1.5 66.0 62.0 2.90 2.70 20.6 8.55 0.0654 0.56
1.0630 0.9055 -0.42 0.06 1.46 1.59 0.06 2.60 2.44 0.11 0.11
1.23
18.000 14.000 -2.5 1.0 41.5 43.0 1.0 59.5 55.0 0.80 1.40 16.7 15.7 0.0691 0.23
0.7087 0.5512 -0.10 0.04 1.63 1.69 0.04 2.34 2.17 0.03 0.06
0.50
23.000 19.000 -6.4 1.5 41.5 43.5 1.5 67.0 63.0 1.90 1.80 21.5 11.4 0.0705 0.44
0.9055 0.7480 -0.25 0.06 1.63 1.71 0.06 2.64 2.48 0.08 0.07
0.96
21.000 18.000 -5.8 2.0 43.5 46.5 1.5 75.0 72.0 0.50 3.90 22.9 12.6 0.0675 0.52
0.8268 0.7087 -0.23 0.08 1.71 1.83 0.06 2.95 2.83 0.02 0.15
1.16
19.000 14.500 -3.8 1.0 45.5 47.0 1.0 65.0 61.0 0.90 1.70 23.8 16.1 0.0732 0.27
0.7480 0.5709 -0.15 0.04 1.79 1.85 0.04 2.56 2.40 0.04 0.07
0.61
19.000 14.500 -3.8 3.5 45.5 52.0 1.0 65.0 61.0 0.90 1.70 23.8 16.1 0.0732 0.27
0.7480 0.5709 -0.15 0.14 1.79 2.05 0.04 2.56 2.40 0.04 0.07
0.61
26.000 20.500 -7.6 3.5 47.0 55.0 1.5 71.0 67.0 1.80 1.70 29.4 14.9 0.0771 0.50
1.0236 0.8071 -0.30 0.14 1.85 2.17 0.06 2.80 2.64 0.07 0.07
1.09
23.000 19.000 -5.6 1.5 46.0 48.5 1.5 75.0 71.0 1.60 2.40 25 11.4 0.0738 0.53
0.9055 0.7480 -0.22 0.06 1.81 1.91 0.06 2.95 2.80 0.06 0.10
1.17
32.000 25.000 -10.9 1.5 47.0 51.0 1.5 76.0 70.0 2.80 2.40 35.9 11.2 0.0827 0.73
1.2598 0.9843 -0.43 0.06 1.85 2.01 0.06 2.99 2.76 0.11 0.10
1.61
23.000 20.000 -5.8 2.0 46.5 50.0 1.5 84.0 80.0 1.80 2.80 30.1 11.6 0.0762 0.73
0.9055 0.7874 -0.23 0.08 1.83 1.97 0.06 3.31 3.15 0.07 0.11
1.61
23.000 17.000 4.1 2.0 52.0 61.0 1.5 86.0 76.0 4.10 3.10 22.9 9.14 0.0910 0.72
0.9055 0.6693 0.16 0.08 2.05 2.40 0.06 3.39 2.99 0.16 0.12
1.58
33.500 27.000 -7.4 2.0 49.0 58.0 1.5 84.0 76.0 3.50 2.90 38.1 14 0.0966 1.10
1.3189 1.0630 -0.29 0.08 1.93 2.28 0.06 3.31 2.99 0.14 0.11
2.43
20.000 15.500 -3.3 1.0 51.0 53.0 1.0 72.0 68.0 0.60 2.10 28.7 16.2 0.0788 0.34
0.7874 0.6102 -0.13 0.04 2.01 2.09 0.04 2.83 2.68 0.02 0.08
0.76
20.000 15.500 -3.3 3.0 51.0 57.0 1.0 72.0 68.0 0.60 2.10 28.7 16.2 0.0788 0.34
0.7874 0.6102 -0.13 0.12 2.01 2.24 0.04 2.83 2.68 0.02 0.08
0.76
Continued on next page.
•
B
Caption:
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
TIMKEN PRODUCTS CATALOG B313
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
IsoClassTM
METRIC 30000
Caption:
d D T C1 e Y C90 Ca90 K C0 Inner Outer
45.000 75.000 20.000 61500 0.39 1.53 15900 10700 1.49 84300
XAB-32009X Y32009X
33109 33109
30209 30209
32209 32209
33209 33209
31309 31309
32309-B 32309-B
32010X 32010X
XAA32010X Y32010X
XAB-32010X Y32010X
XAD32010X Y32010X
XAE32010X Y32010X
XAB-32010X YKB-32010X
33110 33110
30210 30210
XLA33211 Y33211
30310 30310
31310 31310
32310 32310
32310-B 32310-B
XGA33211 Y33211
XGA30210 Y30210
32011X 32011X
33011 33011
30211 30211
33211 33211
31311 31311
32311-B 32311-B
1.7717 2.9528 0.7874 13800 3580 2410 19000
45.000 80.000 26.000 88000 0.38 1.57 22800 15000 1.52 119000
B
1.7717 3.1496 1.0236 19800 5130 3370 26800
45.000 85.000 20.750 74100 0.40 1.48 19200 13300 1.44 89000
1.7717 3.3465 0.8169 16700 4320 3000 20000
45.000 85.000 24.750 81100 0.40 1.48 21000 14600 1.44 98700
1.7717 3.3465 0.9744 18200 4730 3280 22200
45.000 85.000 32.000 116000 0.39 1.56 30100 19900 1.51 155000
Caption:
1.7717 3.3465 1.2598 26100 6770 4470 34800
45.000 100.000 27.250 97900 0.83 0.73 25400 35900 0.71 113000
1.7717 3.9370 1.0728 22000 5700 8050 25400
45.000 100.000 38.250 147000 0.55 1.10 38100 35600 1.07 187000
1.7717 3.9370 1.5059 33100 8580 8020 42000
50.000 80.000 20.000 64700 0.42 1.42 16800 12200 1.38 92700
1.9685 3.1496 0.7874 14500 3770 2730 20800
50.000 80.000 20.000 64700 0.42 1.42 16800 12200 1.38 92700
T
C
1.9685 3.1496 0.7874 14500 3770 2730 20800
50.000 80.000 20.000 64700 0.42 1.42 16800 12200 1.38 92700
1.9685 3.1496 0.7874 14500 3770 2730 20800
50.000 80.000 20.000 64700 0.42 1.42 16800 12200 1.38 92700
D
1.9685 3.1496 0.7874 14500 3770 2730 20800
50.000 80.000 20.000 64700 0.42 1.42 16800 12200 1.38 92700
B
d
1.9685 3.1496 0.7874 14500 3770 2730 20800
50.000 82.000 21.500 64700 0.42 1.42 16800 12200 1.38 92700
1.9685 3.2283 0.8465 14500 3770 2730 20800
50.000 85.000 26.000 89500 0.41 1.46 23200 16300 1.42 125000
a
1.9685 3.3465 1.0236 20100 5220 3670 28100
50.000 90.000 21.750 73600 0.42 1.43 19100 13700 1.39 87400
1.9685 3.5433 0.8563 16500 4290 3080 19700
50.000 100.000 33.500 150000 0.40 1.50 38900 26600 1.46 202000
1.9685 3.9370 1.3189 33700 8750 5980 45300
50.000 110.000 29.250 131000 0.35 1.74 34100 20100 1.69 150000
1.9685 4.3307 1.1516 29600 7660 4530 33800
50.000 110.000 29.250 115000 0.83 0.73 29900 42200 0.71 132000
1.9685 4.3307 1.1516 25900 6720 9490 29700
50.000 110.000 42.250 173000 0.35 1.74 44900 26500 1.69 211000
1.9685 4.3307 1.6634 38900 10100 5960 47500
50.000 110.000 42.250 179000 0.55 1.10 46300 43300 1.07 241000
1.9685 4.3307 1.6634 40200 10400 9740 54300
50.815 100.000 35.000 150000 0.40 1.50 38900 26600 1.46 202000
2.0006 3.9370 1.3780 33700 8750 5980 45300
52.000 90.000 21.750 73600 0.42 1.43 19100 13700 1.39 87400
2.0472 3.5433 0.8563 16500 4290 3080 19700
55.000 90.000 23.000 87900 0.41 1.48 22800 15900 1.44 126000
2.1654 3.5433 0.9055 19800 5120 3560 28300
55.000 90.000 27.000 92100 0.31 1.92 23900 12800 1.87 141000
2.1654 3.5433 1.0630 20700 5370 2870 31700
55.000 100.000 22.750 99100 0.40 1.48 25700 17800 1.44 122000
2.1654 3.9370 0.8957 22300 5780 4010 27400
55.000 100.000 35.000 150000 0.40 1.50 38900 26600 1.46 202000
2.1654 3.9370 1.3780 33700 8750 5980 45300
55.000 120.000 31.500 134000 0.83 0.73 34800 49200 0.71 157000
2.1654 4.7244 1.2402 30200 7830 11100 35300
55.000 120.000 45.500 206000 0.55 1.10 53500 50000 1.07 286000
2.1654 4.7244 1.7913 46400 12000 11200 64300
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B314 TIMKEN PRODUCTS CATALOG
Tapered - IsoClassTM Metric 30000 Series
Dimensions, mm (inches)
Factors
Weight
Bearing
Shaft
Housing
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G1 G2 Cg
20.000 15.500 -3.3 2.3 51.0 58.0 1.0 72.0 68.0 0.60 2.10 28.7 16.2 0.0788 0.34
0.7874 0.6102 -0.13 0.09 2.01 2.28 0.04 2.83 2.68 0.02 0.08
0.75
26.000 20.500 -6.6 1.5 52.0 55.0 1.5 76.0 71.0 1.90 1.70 35.7 14.5 0.0843 0.53
1.0236 0.8071 -0.26 0.06 2.05 2.17 0.06 2.99 2.80 0.08 0.07
1.17
19.000 16.000 -2.5 1.5 53.0 55.0 1.5 80.0 76.0 1.10 3.80 28.3 16.4 0.0789 0.49
0.7480 0.6299 -0.10 0.06 2.09 2.17 0.06 3.15 2.99 0.04 0.15
1.08
23.000 19.000 -4.3 1.5 51.0 54.0 1.5 81.0 76.0 1.10 3.80 30.5 12.4 0.0809 0.58
0.9055 0.7480 -0.17 0.06 2.01 2.13 0.06 3.19 2.99 0.04 0.15
1.27
32.000 25.000 -9.9 1.5 52.0 57.0 1.5 81.0 74.0 2.90 2.40 41.9 13.2 0.0892 0.79
1.2598 0.9843 -0.39 0.06 2.05 2.24 0.06 3.19 2.91 0.12 0.10
1.73
25.000 18.000 4.3 2.0 56.0 67.0 1.5 100.0 86.0 5.40 4.40 30.4 12.7 0.1001 0.94
0.9843 0.7087 0.17 0.08 2.20 2.64 0.06 3.94 3.39 0.21 0.17
2.07
36.000 30.000 -7.9 2.0 55.0 54.0 1.5 95.0 85.0 4.50 2.50 44.9 18.7 0.1017 1.42
1.4173 1.1811 -0.31 0.08 2.17 2.13 0.06 3.74 3.35 0.18 0.10
3.14
20.000 15.500 -2.0 1.0 56.0 58.0 1.0 77.0 73.0 0.90 2.10 34 20.3 0.0853 0.37
0.7874 0.6102 -0.08 0.04 2.20 2.28 0.04 3.03 2.87 0.04 0.08
0.82
20.000 15.500 -2.0 2.3 56.0 60.0 1.0 77.0 73.0 0.90 2.10 34 20.3 0.0853 0.37
0.7874 0.6102 -0.08 0.09 2.20 2.36 0.04 3.03 2.87 0.04 0.08
0.82
20.000 15.500 -2.0 3.0 55.0 62.0 1.0 77.0 73.0 0.90 2.10 34 20.3 0.0853 0.37
0.7874 0.6102 -0.08 0.12 2.17 2.44 0.04 3.03 2.87 0.04 0.08
0.82
20.000 15.500 -2.0 1.5 56.0 59.0 1.0 77.0 73.0 0.90 2.10 34 20.3 0.0853 0.37
0.7874 0.6102 -0.08 0.06 2.20 2.32 0.04 3.03 2.87 0.04 0.08
0.82
20.000 15.500 -2.0 0.3 55.0 56.0 1.0 77.0 73.0 0.90 2.10 34 20.3 0.0853 0.37
0.7874 0.6102 -0.08 0.01 2.17 2.20 0.04 3.03 2.87 0.04 0.08
0.82
20.000 17.000 -2.0 3.0 55.0 62.0 0.5 77.0 76.0 0.90 2.10 34 20.3 0.0853 0.42
0.7874 0.6693 -0.08 0.12 2.17 2.44 0.02 3.03 2.99 0.04 0.08
0.93
26.000 20.000 -5.3 1.5 57.0 61.0 1.5 82.0 76.0 2.30 1.70 40.6 20.6 0.0899 0.58
1.0236 0.7874 -0.21 0.06 2.24 2.40 0.06 3.23 2.99 0.09 0.07
1.29
20.000 17.000 -2.0 1.5 56.0 59.0 1.5 85.0 81.0 1.40 3.10 30.3 14.9 0.0814 0.54
0.7874 0.6693 -0.08 0.06 2.20 2.32 0.06 3.35 3.19 0.05 0.12
1.19
33.500 27.000 -8.1 2.0 62.0 67.0 1.5 96.0 89.0 1.40 2.80 59.3 15.3 0.1010 1.24
1.3189 1.0630 -0.32 0.08 2.44 2.64 0.06 3.78 3.50 0.05 0.11
2.73
27.000 23.000 -6.1 2.5 58.0 62.0 2.0 103.0 98.0 2.00 3.20 48.7 16.7 0.0892 1.26
1.0630 0.9055 -0.24 0.10 2.28 2.44 0.08 4.06 3.86 0.08 0.12
2.77
27.000 19.000 5.6 2.5 63.0 75.0 2.0 104.5 93.0 5.20 4.20 37.1 14.6 0.0690 1.21
1.0630 0.7480 0.22 0.10 2.48 2.95 0.08 4.11 3.66 0.20 0.16
2.68
40.000 33.000 -14.2 2.5 60.0 65.0 2.0 103.0 95.0 4.60 2.90 60.6 16 0.0965 1.83
1.5748 1.2992 -0.56 0.10 2.36 2.56 0.08 4.06 3.74 0.18 0.11
4.03
40.000 33.000 -8.6 2.5 60.0 71.0 2.0 103.0 93.0 4.30 3.30 62.7 17.9 0.0783 1.94
1.5748 1.2992 -0.34 0.10 2.36 2.80 0.08 4.06 3.66 0.17 0.13
4.28
35.000 27.000 -9.7 2.0 62.0 67.0 1.5 96.0 89.0 2.90 2.80 59.3 15.3 0.1010 1.25
1.3780 1.0630 -0.38 0.08 2.44 2.64 0.06 3.78 3.50 0.11 0.11
2.76
20.000 17.000 -2.0 4.0 59.0 66.0 1.5 85.0 81.0 1.40 3.10 30.3 15.9 0.0814 0.51
0.7874 0.6693 -0.08 0.16 2.32 2.60 0.06 3.35 3.19 0.05 0.12
1.13
23.000 17.500 -3.0 1.5 62.0 65.0 1.5 86.5 82.0 1.80 2.00 46 28 0.0931 0.57
0.9055 0.6890 -0.12 0.06 2.44 2.56 0.06 3.41 3.23 0.07 0.08
1.25
27.000 21.000 -7.9 1.5 61.0 63.0 1.5 87.0 82.0 2.40 1.90 56.5 27.9 0.0915 0.66
1.0630 0.8268 -0.31 0.06 2.40 2.48 0.06 3.43 3.23 0.09 0.07
1.46
21.000 18.000 -1.8 2.0 64.0 67.0 1.5 95.0 91.0 1.50 4.40 41.9 22.8 0.0897 0.72
0.8268 0.7087 -0.07 0.08 2.52 2.64 0.06 3.74 3.58 0.06 0.17
1.58
35.000 27.000 -9.7 2.0 62.0 68.0 1.5 96.0 89.0 2.90 2.80 59.3 15.3 0.1010 1.16
1.3780 1.0630 -0.38 0.08 2.44 2.68 0.06 3.78 3.50 0.11 0.11
2.55
29.000 21.000 6.9 2.5 68.0 82.0 2.0 115.0 103.0 4.80 4.30 45.5 15.9 0.0739 1.57
1.1417 0.8268 0.27 0.10 2.68 3.23 0.08 4.53 4.06 0.19 0.17
3.45
43.000 35.000 -8.6 2.5 66.0 82.0 2.0 114.0 101.0 4.50 3.50 78.8 24.6 0.0794 2.45
1.6929 1.3780 -0.34 0.10 2.60 3.23 0.08 4.49 3.98 0.18 0.14
5.40
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B315
•
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
IsoClassTM
METRIC 30000
Caption:
d D T C1 e Y C90 Ca90 K C0 Inner Outer
60.000 95.000 23.000 89600 0.43 1.39 23200 17100 1.36 132000
32012X 32012X
33012 33012
33112 33112
30212 30212
33212 33212
XAA33212 Y33212
XAB-33212 Y33212
30312 30312
31312 31312
32312 32312
32013X 32013X
33013 33013
33113 33113
30213 30213
32213 32213
33213 33213
30313 30313
31313 31313
32014X 32014X
33014 33014
33114 33114
30214 30214
32214 32214
31314 31314
32314 32314
32015X 32015X
33015 33015
33115 33115
2.3622 3.7402 0.9055 20100 5220 3840 29600
60.000 95.000 27.000 95100 0.33 1.83 24600 13800 1.78 150000
B
2.3622 3.7402 1.0630 21400 5540 3110 33600
60.000 100.000 30.000 127000 0.40 1.51 32800 22300 1.47 180000
2.3622 3.9370 1.1811 28500 7380 5020 40500
60.000 110.000 23.750 99100 0.40 1.48 25700 17800 1.44 117000
2.3622 4.3307 0.9350 22300 5770 4000 26200
60.000 110.000 38.000 183000 0.40 1.48 47500 32800 1.44 253000
Caption:
2.3622 4.3307 1.4961 41200 10700 7380 56800
60.000 110.000 38.000 183000 0.40 1.48 47500 32800 1.44 253000
2.3622 4.3307 1.4961 41200 10700 7380 56800
60.000 110.000 38.000 183000 0.40 1.48 47500 32800 1.44 253000
2.3622 4.3307 1.4961 41200 10700 7380 56800
60.000 130.000 33.500 186000 0.35 1.74 48300 28500 1.69 221000
2.3622 5.1181 1.3189 41900 10900 6420 49800
60.000 130.000 33.500 159000 0.83 0.73 41200 58200 0.71 188000
T
C
2.3622 5.1181 1.3189 35700 9250 13100 42200
60.000 130.000 48.500 245000 0.35 1.74 63400 37500 1.69 310000
2.3622 5.1181 1.9094 55000 14300 8420 69800
65.000 100.000 23.000 90800 0.46 1.31 23500 18500 1.27 137000
D
2.5591 3.9370 0.9055 20400 5290 4160 30900
65.000 100.000 27.000 99100 0.35 1.72 25700 15300 1.68 162000
B
d
2.5591 3.9370 1.0630 22300 5780 3450 36400
65.000 110.000 34.000 155000 0.39 1.55 40100 26600 1.51 225000
2.5591 4.3307 1.3386 34700 9010 5980 50600
65.000 120.000 24.750 128000 0.40 1.48 33300 23100 1.44 158000
a
2.5591 4.7244 0.9744 28800 7480 5190 35500
65.000 120.000 32.750 161000 0.40 1.48 41700 28900 1.44 209000
2.5591 4.7244 1.2894 36200 9380 6500 46900
65.000 120.000 41.000 182000 0.39 1.54 47200 31500 1.50 280000
2.5591 4.7244 1.6142 40900 10600 7080 63000
65.000 140.000 36.000 206000 0.35 1.74 53400 31500 1.69 242000
2.5591 5.5118 1.4173 46300 12000 7090 54400
65.000 140.000 36.000 182000 0.83 0.73 47100 66500 0.71 217000
2.5591 5.5118 1.4173 40800 10600 15000 48700
70.000 110.000 25.000 104000 0.43 1.38 27000 20100 1.34 163000
2.7559 4.3307 0.9843 23400 6060 4510 36700
70.000 110.000 31.000 142000 0.28 2.11 36800 17900 2.05 236000
2.7559 4.3307 1.2205 31900 8280 4040 53000
70.000 120.000 37.000 183000 0.38 1.58 47500 30800 1.54 270000
2.7559 4.7244 1.4567 41200 10700 6930 60800
70.000 125.000 26.250 128000 0.42 1.43 33200 23800 1.39 157000
2.7559 4.9213 1.0335 28800 7450 5360 35300
70.000 125.000 33.250 169000 0.42 1.43 43800 31500 1.39 224000
2.7559 4.9213 1.3091 38000 9840 7080 50400
70.000 150.000 38.000 197000 0.83 0.73 51200 72300 0.71 235000
2.7559 5.9055 1.4961 44400 11500 16200 52900
70.000 150.000 54.000 339000 0.35 1.74 87900 51900 1.69 448000
2.7559 5.9055 2.1260 76200 19800 11700 101000
75.000 115.000 25.000 106000 0.46 1.31 27400 21500 1.27 170000
2.9528 4.5276 0.9842 23700 6150 4830 38200
75.000 115.000 31.000 146000 0.30 2.01 37800 19300 1.96 239000
2.9528 4.5276 1.2205 32800 8510 4340 53700
75.000 125.000 37.000 189000 0.40 1.51 49100 33400 1.47 287000
2.9528 4.9213 1.4567 42600 11000 7510 64500
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B316 TIMKEN PRODUCTS CATALOG
Tapered - IsoClassTM Metric 30000 Series
Dimensions, mm (inches)
Factors
Weight
Bearing
Shaft
Housing
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G1 G2 Cg
23.000 17.500 -1.8 1.5 66.0 68.0 1.5 91.0 86.0 1.80 2.00 51.2 31.4 0.0982 0.60
0.9055 0.6890 -0.07 0.06 2.60 2.68 0.06 3.58 3.39 0.07 0.08
1.32
27.000 21.000 -7.1 1.5 65.0 69.0 1.5 91.0 86.0 2.50 1.90 63 31.1 0.0964 0.69
1.0630 0.8268 -0.28 0.06 2.56 2.72 0.06 3.58 3.39 0.10 0.07
1.53
30.000 23.000 -6.4 1.5 67.0 72.0 1.5 96.0 90.0 2.40 2.50 61.7 24 0.1021 0.91
1.1811 0.9055 -0.25 0.06 2.64 2.83 0.06 3.78 3.54 0.10 0.10
2.00
22.000 19.000 -1.8 2.0 66.0 70.0 1.5 103.0 99.0 1.50 3.50 44.1 27 0.0909 0.89
0.8661 0.7480 -0.07 0.08 2.60 2.76 0.06 4.06 3.90 0.06 0.14
1.96
38.000 29.000 -9.9 2.0 68.0 74.0 1.5 105.0 98.0 4.00 2.50 76.2 18.1 0.0758 1.53
1.4961 1.1417 -0.39 0.08 2.68 2.91 0.06 4.13 3.86 0.16 0.10
3.37
38.000 29.000 -9.9 6.0 68.0 85.0 1.5 105.0 98.0 4.00 2.50 76.2 18.1 0.0758 1.53
1.4961 1.1417 -0.39 0.24 2.68 3.35 0.06 4.13 3.86 0.16 0.10
3.37
38.000 29.000 -9.9 5.0 68.0 83.0 1.5 105.0 98.0 4.00 2.50 76.2 18.1 0.0758 1.53
1.4961 1.1417 -0.39 0.20 2.68 3.27 0.06 4.13 3.86 0.16 0.10
3.37
31.000 26.000 -7.1 3.0 69.0 74.0 2.5 121.0 116.0 2.50 3.90 75.8 16.7 0.0710 1.96
1.2205 1.0236 -0.28 0.12 2.72 2.91 0.10 4.76 4.57 0.10 0.16
4.32
31.000 22.000 7.6 3.0 74.0 89.0 2.5 123.0 111.0 5.80 4.10 56.2 25.1 0.0792 1.97
1.2205 0.8661 0.30 0.12 2.91 3.50 0.10 4.84 4.37 0.23 0.16
4.33
46.000 37.000 -16.5 3.0 72.0 78.0 2.5 121.0 113.0 7.00 3.40 94.1 21.2 0.0768 2.88
1.8110 1.4567 -0.65 0.12 2.83 3.07 0.10 4.76 4.45 0.28 0.13
6.35
23.000 17.500 -0.3 1.5 71.0 73.0 1.5 97.0 91.0 2.00 2.00 57.4 35.6 0.1039 0.64
0.9055 0.6890 -0.01 0.06 2.80 2.87 0.06 3.82 3.58 0.08 0.08
1.40
27.000 21.000 -6.1 1.5 70.0 74.0 1.5 96.0 91.0 2.50 1.90 72.4 36.1 0.1029 0.74
1.0630 0.8268 -0.24 0.06 2.76 2.91 0.06 3.78 3.58 0.10 0.08
1.64
34.000 26.500 -7.9 1.5 73.0 77.0 1.5 106.0 99.0 2.40 2.50 80.1 24.5 0.1105 1.26
1.3386 1.0433 -0.31 0.06 2.87 3.03 0.06 4.17 3.90 0.10 0.10
2.78
23.000 20.000 -1.5 2.0 74.0 77.0 1.5 114.0 110.0 2.10 4.30 60.4 27.4 0.0653 1.15
0.9055 0.7874 -0.06 0.08 2.91 3.03 0.06 4.49 4.33 0.08 0.17
2.53
31.000 27.000 -5.6 2.0 73.0 77.0 1.5 114.0 108.0 3.70 3.10 72.9 20.5 0.0742 1.51
1.2205 1.0630 -0.22 0.08 2.87 3.03 0.06 4.49 4.25 0.14 0.12
3.34
41.000 32.000 -11.2 2.0 74.0 79.0 1.5 115.0 107.0 3.40 2.70 90.3 21.8 0.0745 1.97
1.6142 1.2598 -0.44 0.08 2.91 3.11 0.06 4.53 4.21 0.14 0.11
4.35
33.000 28.000 -7.6 3.0 75.0 80.0 2.5 131.0 125.0 2.50 4.70 87.4 22.9 0.0743 2.46
1.2992 1.1024 -0.30 0.12 2.95 3.15 0.10 5.16 4.92 0.10 0.18
5.43
33.000 23.000 8.1 3.0 80.0 96.0 2.5 132.5 120.0 6.20 4.70 67.1 22.2 0.0839 2.40
1.2992 0.9055 0.32 0.12 3.15 3.78 0.10 5.22 4.72 0.24 0.18
5.30
25.000 19.000 -1.0 1.5 76.0 78.0 1.5 105.0 100.0 2.40 1.80 74.1 44.8 0.1112 0.87
0.9843 0.7480 -0.04 0.06 2.99 3.07 0.06 4.13 3.94 0.09 0.07
1.91
31.000 25.500 -8.6 1.5 77.0 79.0 1.5 106.0 101.0 0.60 3.60 105 50.4 0.0985 1.10
1.2205 1.0039 -0.34 0.06 3.03 3.11 0.06 4.17 3.98 0.02 0.14
2.43
37.000 29.000 -8.6 2.0 79.0 85.0 1.5 115.0 108.0 2.70 2.40 99.5 31.5 0.0809 1.68
1.4567 1.1417 -0.34 0.08 3.11 3.35 0.06 4.53 4.25 0.11 0.09
3.71
24.000 21.000 -0.5 2.0 77.0 80.0 1.5 118.0 115.0 1.80 3.80 63.7 24.7 0.0714 1.25
0.9449 0.8268 -0.02 0.08 3.03 3.15 0.06 4.65 4.53 0.07 0.15
2.75
31.000 27.000 -4.6 2.0 79.0 82.0 1.5 119.0 114.0 3.40 3.30 81.4 25.6 0.0779 1.64
1.2205 1.0630 -0.18 0.08 3.11 3.23 0.06 4.69 4.49 0.13 0.13
3.61
35.000 25.000 9.1 3.0 85.0 101.0 2.5 141.5 129.0 5.70 5.60 75.8 29.5 0.0873 2.93
1.3780 0.9843 0.36 0.12 3.35 3.98 0.10 5.57 5.08 0.22 0.22
6.47
51.000 42.000 -16.8 3.0 86.0 94.0 2.5 141.0 133.0 4.00 4.50 142 33.1 0.0828 4.41
2.0079 1.6535 -0.66 0.12 3.39 3.70 0.10 5.55 5.24 0.16 0.18
9.72
25.000 19.000 0.5 1.5 82.0 84.0 1.5 110.0 105.0 2.50 1.80 81.8 49.9 0.1166 0.91
0.9843 0.7480 0.02 0.06 3.23 3.31 0.06 4.33 4.13 0.10 0.07
2.01
31.000 25.500 -7.6 1.5 83.0 90.0 1.5 110.0 104.0 1.50 2.50 109 47.2 0.1122 1.15
1.2205 1.0039 -0.30 0.06 3.27 3.54 0.06 4.33 4.09 0.06 0.10
2.54
37.000 29.000 -7.4 2.0 83.0 88.0 1.5 120.0 112.0 2.80 2.40 111 26.3 0.0851 1.76
1.4567 1.1417 -0.29 0.08 3.27 3.46 0.06 4.72 4.41 0.11 0.09
3.88
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B317
•
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
IsoClassTM
METRIC 30000
Caption:
d D T C1 e Y C90 Ca90 K C0 Inner Outer
75.000 130.000 27.250 141000 0.44 1.38 36500 27100 1.34 179000
30215 30215
32215 32215
33215 33215
30315 30315
31315 31315
32016X 32016X
33116 33116
XA33116 Y33116
30216 30216
32216 32216
33216 33216
XUB-30216 YFA30216
30316 30316
32316 32316
XUA32018X Y32018X
32017X 32017X
XAA32017X Y32017X
33017 33017
33117 33117
30217 30217
32217 32217
33217 33217
30317 30317
32018X 32018X
XAA32018X Y32018X
33018 33018
33118 33118
30218 30218
2.9528 5.1181 1.0728 31600 8190 6100 40300
75.000 130.000 33.250 170000 0.44 1.38 44100 32900 1.34 227000
B
2.9528 5.1181 1.3091 38300 9920 7390 51100
75.000 130.000 41.000 219000 0.43 1.40 56700 41500 1.37 316000
2.9528 5.1181 1.6142 49200 12800 9340 71000
75.000 160.000 40.000 273000 0.35 1.74 70800 41800 1.69 333000
2.9528 6.2992 1.5748 61400 15900 9390 74800
75.000 160.000 40.000 236000 0.83 0.73 61300 86600 0.71 288000
Caption:
2.9528 6.2992 1.5748 53200 13800 19500 64700
80.000 125.000 29.000 154000 0.42 1.42 39800 28900 1.38 238000
3.1496 4.9213 1.1417 34600 8960 6490 53600
80.000 130.000 37.000 193000 0.42 1.44 50100 35700 1.40 300000
3.1496 5.1181 1.4567 43400 11300 8020 67300
80.000 130.000 37.000 172000 0.42 1.44 44700 31800 1.40 300000
3.1496 5.1181 1.4567 38700 10000 7120 67300
80.000 140.000 28.250 161000 0.42 1.43 41800 30100 1.39 204000
T
C
3.1496 5.5118 1.1122 36300 9400 6760 45900
80.000 140.000 35.250 190000 0.42 1.43 49400 35500 1.39 249000
3.1496 5.5118 1.3878 42800 11100 7980 56000
80.000 140.000 46.000 275000 0.43 1.41 71300 51900 1.37 409000
D
3.1496 5.5118 1.8110 61800 16000 11700 91900
80.000 141.000 30.250 151000 0.42 1.43 39300 28200 1.39 187000
B
d
3.1496 5.5512 1.1909 34000 8830 6350 42000
80.000 170.000 42.500 309000 0.35 1.74 80000 47300 1.69 379000
3.1496 6.6929 1.6732 69400 18000 10600 85200
80.000 170.000 61.500 414000 0.35 1.74 107000 63200 1.69 563000
a
3.1496 6.6929 2.4213 93000 24100 14200 127000
84.000 140.000 32.000 170000 0.42 1.42 44000 31900 1.38 264000
3.3071 5.5118 1.2598 38200 9890 7160 59400
85.000 130.000 29.000 151000 0.44 1.36 39000 29500 1.32 235000
3.3465 5.1181 1.1417 33800 8770 6640 52900
85.000 130.000 29.000 151000 0.44 1.36 39000 29500 1.32 235000
3.3465 5.1181 1.1417 33800 8770 6640 52900
85.000 130.000 36.000 204000 0.29 2.06 52900 26400 2.00 343000
3.3465 5.1181 1.4173 45800 11900 5930 77100
85.000 140.000 41.000 235000 0.41 1.48 60900 42400 1.44 386000
3.3465 5.5118 1.6142 52800 13700 9540 86800
85.000 150.000 30.500 185000 0.42 1.43 47900 34400 1.39 236000
3.3465 5.9055 1.2008 41500 10800 7740 53000
85.000 150.000 38.500 227000 0.42 1.43 58900 42300 1.39 305000
3.3465 5.9055 1.5157 51100 13200 9520 68700
85.000 150.000 49.000 325000 0.42 1.43 84300 60400 1.40 483000
3.3465 5.9055 1.9291 73100 19000 13600 109000
85.000 180.000 44.500 290000 0.35 1.74 75300 44400 1.69 346000
3.3465 7.0866 1.7520 65300 16900 9990 77700
90.000 140.000 32.000 170000 0.42 1.42 44000 31900 1.38 264000
3.5433 5.5118 1.2598 38200 9890 7160 59400
90.000 140.000 32.000 170000 0.42 1.42 44000 31900 1.38 264000
3.5433 5.5118 1.2598 38200 9890 7160 59400
90.000 140.000 39.000 229000 0.27 2.23 59400 27300 2.17 377000
3.5433 5.5118 1.5354 51500 13300 6140 84700
90.000 150.000 45.000 284000 0.40 1.51 73500 50000 1.47 447000
3.5433 5.9055 1.7717 63800 16500 11200 100000
90.000 160.000 32.500 197000 0.42 1.43 51100 36700 1.39 249000
3.5433 6.2992 1.2795 44300 11500 8260 56000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B318 TIMKEN PRODUCTS CATALOG
Tapered - IsoClassTM Metric 30000 Series
Dimensions, mm (inches)
Factors
Weight
Bearing
Shaft
Housing
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G1 G2 Cg
25.000 22.000 0.0 2.0 85.0 88.0 1.5 124.0 120.0 2.00 3.80 74.1 35.2 0.0760 1.35
0.9843 0.8661 0.00 0.08 3.35 3.46 0.06 4.88 4.72 0.08 0.15
2.97
31.000 27.000 -3.6 2.0 84.0 88.0 1.5 125.0 117.0 3.50 3.40 87.5 37.8 0.0806 1.69
1.2205 1.0630 -0.14 0.08 3.31 3.46 0.06 4.92 4.61 0.14 0.13
3.72
41.000 31.000 -8.6 2.0 83.0 89.0 1.5 125.0 117.0 4.20 2.70 111 27 0.0874 2.16
1.6142 1.2205 -0.34 0.08 3.27 3.50 0.06 4.92 4.61 0.17 0.11
4.77
37.000 31.000 -7.9 3.0 90.0 94.0 2.5 149.0 145.0 2.40 5.40 125 36.2 0.0788 3.60
1.4567 1.2205 -0.31 0.12 3.54 3.70 0.10 5.87 5.71 0.10 0.21
7.93
37.000 26.000 10.2 3.0 90.0 109.0 2.5 151.5 138.0 6.30 5.50 93.8 19 0.0938 3.43
1.4567 1.0236 0.40 0.12 3.54 4.29 0.10 5.96 5.43 0.25 0.22
7.56
29.000 22.000 -1.8 1.5 87.0 91.0 1.5 120.0 114.0 2.80 2.40 104 32.7 0.1234 1.27
1.1417 0.8661 -0.07 0.06 3.43 3.58 0.06 4.72 4.49 0.11 0.09
2.80
37.000 29.000 -6.1 2.0 89.0 94.0 1.5 125.0 119.0 3.40 2.40 122 37.8 0.0891 1.86
1.4567 1.1417 -0.24 0.08 3.50 3.70 0.06 4.92 4.69 0.13 0.10
4.11
37.000 29.000 -6.1 2.0 89.0 94.0 1.5 125.0 119.0 3.40 2.40 122 37.8 0.0838 1.86
1.4567 1.1417 -0.24 0.08 3.50 3.70 0.06 4.92 4.69 0.13 0.10
4.10
26.000 22.000 -0.5 2.5 90.0 94.0 2.0 133.0 128.0 2.00 6.00 85.8 37.4 0.0742 1.66
1.0236 0.8661 -0.02 0.10 3.54 3.70 0.08 5.24 5.04 0.08 0.23
3.66
33.000 28.000 -4.6 2.5 89.0 94.0 2.0 133.0 126.0 3.90 4.00 98.4 28.7 0.0828 2.05
1.2992 1.1024 -0.18 0.10 3.50 3.70 0.08 5.24 4.96 0.15 0.16
4.51
46.000 35.000 -10.7 2.5 89.0 97.0 2.0 135.0 125.0 5.40 2.80 143 38 0.0948 2.94
1.8110 1.3780 -0.42 0.10 3.50 3.82 0.08 5.31 4.92 0.21 0.11
6.49
28.000 22.000 -2.0 0.5 90.0 90.0 2.0 133.0 128.0 3.80 3.50 80.7 25.6 0.0771 1.80
1.1024 0.8661 -0.08 0.02 3.54 3.54 0.08 5.24 5.04 0.15 0.14
3.98
39.000 33.000 -7.9 3.0 96.0 100.0 2.5 159.0 154.0 1.90 5.90 147 37.5 0.0830 4.33
1.5354 1.2992 -0.31 0.12 3.78 3.94 0.10 6.26 6.06 0.08 0.23
9.54
58.000 48.000 -19.0 3.0 100.0 105.0 2.5 159.0 151.0 6.00 4.50 196 38.8 0.0922 6.35
2.2835 1.8898 -0.75 0.12 3.94 4.13 0.10 6.26 5.94 0.24 0.18
13.99
32.000 24.000 -2.0 0.5 94.0 94.0 1.5 134.0 128.0 3.20 2.20 128 42.8 0.1317 1.96
1.2598 0.9449 -0.08 0.02 3.70 3.70 0.06 5.28 5.04 0.13 0.09
4.32
29.000 22.000 -0.5 1.5 92.0 95.0 1.5 125.0 119.0 2.10 2.70 109 36.3 0.1270 1.33
1.1417 0.8661 -0.02 0.06 3.62 3.74 0.06 4.92 4.69 0.08 0.11
2.93
29.000 22.000 -0.5 6.5 92.0 106.0 1.5 125.0 119.0 2.10 2.70 109 36.3 0.1270 1.31
1.1417 0.8661 -0.02 0.26 3.62 4.17 0.06 4.92 4.69 0.08 0.11
2.89
36.000 29.500 -9.4 1.5 93.0 96.0 1.5 125.0 120.0 1.50 2.80 158 55.4 0.0865 1.74
1.4173 1.1614 -0.37 0.06 3.66 3.78 0.06 4.92 4.72 0.06 0.11
3.83
41.000 32.000 -8.1 2.5 96.0 100.0 2.0 135.0 126.0 4.50 2.80 161 39.6 0.0972 2.46
1.6142 1.2598 -0.32 0.10 3.78 3.94 0.08 5.31 4.96 0.18 0.11
5.42
28.000 24.000 -0.3 2.5 93.0 97.0 2.0 142.0 137.0 2.00 4.10 101 40.6 0.0833 2.07
1.1024 0.9449 -0.01 0.10 3.66 3.82 0.08 5.59 5.39 0.08 0.16
4.57
36.000 30.000 -4.6 2.5 94.0 100.0 2.0 142.0 134.0 4.10 3.20 121 25.7 0.0888 2.62
1.4173 1.1811 -0.18 0.10 3.70 3.94 0.08 5.59 5.28 0.16 0.12
5.78
49.000 37.000 -11.7 2.5 94.0 103.0 2.0 144.0 134.0 5.60 3.20 168 34.4 0.0995 3.59
1.9291 1.4567 -0.46 0.10 3.70 4.06 0.08 5.67 5.28 0.22 0.13
7.92
41.000 34.000 -9.7 4.0 100.0 106.0 3.0 166.5 162.0 6.00 3.50 144 41.6 0.0823 4.78
1.6142 1.3386 -0.38 0.16 3.94 4.17 0.12 6.56 6.38 0.24 0.14
10.54
32.000 24.000 -2.0 2.0 98.0 102.0 1.5 134.0 128.0 3.20 2.20 128 41.1 0.1317 1.70
1.2598 0.9449 -0.08 0.08 3.86 4.02 0.06 5.28 5.04 0.13 0.09
3.75
32.000 24.000 -2.0 6.0 98.0 111.0 1.5 134.0 128.0 3.20 2.20 128 41.1 0.1317 1.70
1.2598 0.9449 -0.08 0.24 3.86 4.37 0.06 5.28 5.04 0.13 0.09
3.75
39.000 32.500 -10.9 2.0 98.0 101.0 1.5 135.0 131.0 1.80 2.30 183 55.8 0.0884 2.20
1.5354 1.2795 -0.43 0.08 3.86 3.98 0.06 5.31 5.16 0.07 0.09
4.85
45.000 35.000 -9.4 2.5 100.0 108.0 2.0 145.0 135.0 3.80 2.90 180 43.2 0.0942 3.15
1.7717 1.3780 -0.37 0.10 3.94 4.25 0.08 5.71 5.31 0.15 0.12
6.94
30.000 26.000 -0.8 2.5 98.0 103.0 2.0 151.0 146.0 2.40 4.80 112 47.7 0.0859 2.52
1.1811 1.0236 -0.03 0.10 3.86 4.06 0.08 5.94 5.75 0.09 0.19
5.57
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B319
•
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
IsoClassTM
METRIC 30000
Caption:
d D T C1 e Y C90 Ca90 K C0 Inner Outer
95.000 145.000 39.000 228000 0.28 2.16 59100 28100 2.10 378000
XAA33019 Y33019
30219 30219
32219 32219
33020 33020
30220 30220
32220 32220
32021X 32021X
33021 33021
32221 32221
XGA32021X Y32021X
32022X 32022X
30222 30222
32222 32222
XFA32224 Y32224
32924 32924
32024X 32024X
XAA32024X Y32024X
30224 30224
32224 32224
32026X 32026X
30226 30226
32928 32928
XAA32028X Y32028X
30228 30228
32930 32930
32030X 32030X
30230 30230
32032X 32032X
3.7402 5.7087 1.5354 51300 13300 6320 85100
95.000 170.000 34.500 245000 0.42 1.43 63400 45600 1.39 325000
B
3.7402 6.6929 1.3583 55000 14300 10300 73000
95.000 170.000 45.500 293000 0.42 1.43 75900 54600 1.39 401000
3.7402 6.6929 1.7913 65800 17100 12300 90100
100.000 150.000 39.000 232000 0.29 2.09 60200 29600 2.03 393000
3.9370 5.9055 1.5354 52200 13500 6650 88300
100.000 180.000 37.000 279000 0.42 1.43 72400 52100 1.39 376000
Caption:
3.9370 7.0866 1.4567 62800 16300 11700 84500
100.000 180.000 49.000 364000 0.42 1.43 94400 67900 1.39 521000
3.9370 7.0866 1.9291 81900 21200 15200 117000
105.000 160.000 35.000 210000 0.44 1.35 54500 41500 1.31 339000
4.1339 6.2992 1.3780 47300 12300 9320 76200
105.000 160.000 43.000 269000 0.28 2.12 69800 33800 2.07 449000
4.1339 6.2992 1.6929 60600 15700 7590 101000
105.000 190.000 53.000 369000 0.42 1.43 95600 68800 1.39 516000
T
C
4.1339 7.4803 2.0866 82900 21500 15500 116000
106.000 160.000 35.000 210000 0.44 1.35 54500 41500 1.31 339000
4.1732 6.2992 1.3780 47300 12300 9320 76200
110.000 170.000 38.000 261000 0.43 1.39 67600 49800 1.36 433000
D
4.3307 6.6929 1.4961 58600 15200 11200 97300
110.000 200.000 41.000 345000 0.42 1.43 89300 64200 1.39 472000
B
d
4.3307 7.8740 1.6142 77500 20100 14500 106000
110.000 200.000 56.000 426000 0.42 1.43 111000 79500 1.39 612000
4.3307 7.8740 2.2047 95800 24800 17900 137000
110.000 215.000 61.500 502000 0.44 1.38 130000 97000 1.34 753000
a
4.3307 8.4646 2.4213 113000 29300 21800 169000
120.000 165.000 29.000 164000 0.35 1.72 42500 25400 1.68 303000
4.7244 6.4961 1.1417 36800 9550 5700 68100
120.000 180.000 38.000 269000 0.46 1.31 69700 54700 1.27 464000
4.7244 7.0866 1.4961 60400 15700 12300 104000
120.000 180.000 38.000 271000 0.46 1.31 70200 55100 1.27 466000
4.7244 7.0866 1.4961 60900 15800 12400 105000
120.000 215.000 43.500 367000 0.44 1.38 95100 70800 1.34 508000
4.7244 8.4646 1.7126 82500 21400 15900 114000
120.000 215.000 61.500 543000 0.44 1.38 141000 105000 1.34 832000
4.7244 8.4646 2.4213 122000 31600 23500 187000
130.000 200.000 45.000 359000 0.43 1.38 93100 69300 1.34 620000
5.1181 7.8740 1.7717 80700 20900 15600 139000
130.000 230.000 43.750 399000 0.44 1.38 103000 76700 1.34 550000
5.1181 9.0551 1.7224 89700 23300 17400 124000
140.000 190.000 32.000 207000 0.36 1.67 53800 33200 1.62 398000
5.5118 7.4803 1.2598 46600 12100 7460 89500
140.000 210.000 45.000 365000 0.46 1.31 94700 74400 1.27 646000
5.5118 8.2677 1.7717 82100 21300 16700 145000
140.000 250.000 45.750 465000 0.44 1.38 120000 89400 1.34 649000
5.5118 9.8425 1.8012 104000 27100 20200 146000
150.000 210.000 38.000 300000 0.33 1.83 77800 43700 1.78 573000
5.9055 8.2677 1.4961 67500 17500 9830 129000
150.000 225.000 48.000 410000 0.46 1.31 106000 83200 1.27 730000
5.9055 8.8583 1.8898 92200 23900 18800 164000
150.000 270.000 49.000 523000 0.44 1.38 136000 101000 1.34 735000
5.9055 10.6299 1.9291 118000 30500 22700 165000
160.000 240.000 51.000 471000 0.46 1.31 122000 95800 1.27 853000
6.2992 9.4488 2.0079 106000 27500 21600 192000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
•
B320 TIMKEN PRODUCTS CATALOG
Tapered - IsoClassTM Metric 30000 Series
Dimensions, mm (inches)
Factors
Weight
Bearing
Shaft
Housing
Cage
kg (lbs.)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
B C a(3) R(4) da db r (4) Da Db Aa Ab G1 G2 Cg
39.000 32.500 -10.2 6.0 102.0 114.0 1.5 139.0 133.0 1.90 2.30 192 48.4 0.0907 2.23
1.5354 1.2795 -0.40 0.24 4.02 4.49 0.06 5.47 5.24 0.07 0.09
4.93
32.000 27.000 -1.0 3.0 108.0 113.0 2.5 161.0 154.0 2.60 6.20 143 49.8 0.0880 3.14
1.2598 1.0630 -0.04 0.12 4.25 4.45 0.10 6.34 6.06 0.10 0.24
6.92
43.000 37.000 -6.4 3.0 106.0 111.0 2.5 161.0 152.0 4.80 3.00 166 35.3 0.0984 4.06
1.6929 1.4567 -0.25 0.12 4.17 4.37 0.10 6.34 5.98 0.19 0.12
8.94
39.000 32.500 -9.4 2.0 107.0 111.0 1.5 144.0 139.0 1.90 2.30 206 65.1 0.0938 2.37
1.5354 1.2795 -0.37 0.08 4.21 4.37 0.06 5.67 5.47 0.08 0.09
5.22
34.000 29.000 -0.8 3.0 115.0 119.0 2.5 169.0 163.0 2.10 6.10 168 51.9 0.0928 3.77
1.3386 1.1417 -0.03 0.12 4.53 4.69 0.10 6.65 6.42 0.08 0.24
8.3
46.000 39.000 -7.4 3.0 113.0 122.0 2.5 171.0 162.0 5.30 5.40 211 49.9 0.1006 5.00
1.8110 1.5354 -0.29 0.12 4.45 4.80 0.10 6.73 6.38 0.21 0.21
11.02
35.000 26.000 -0.3 2.5 113.0 119.0 2.0 154.0 147.0 3.20 2.60 176 50.7 0.1024 2.40
1.3780 1.0236 -0.01 0.10 4.45 4.69 0.08 6.06 5.79 0.13 0.10
5.29
43.000 34.000 -12.2 2.5 113.0 118.0 2.0 153.0 147.0 3.10 3.10 236 54.8 0.0975 2.95
1.6929 1.3386 -0.48 0.10 4.45 4.65 0.08 6.02 5.79 0.12 0.12
6.50
50.000 43.000 -7.9 3.0 118.0 123.0 2.5 180.0 171.0 5.20 2.70 220 43.5 0.1082 5.98
1.9685 1.6929 -0.31 0.12 4.65 4.84 0.10 7.09 6.73 0.20 0.11
13.18
35.000 26.000 -0.3 6.0 115.0 128.0 2.0 154.0 147.0 3.20 2.60 176 50.7 0.1024 2.36
1.3780 1.0236 -0.01 0.24 4.53 5.04 0.08 6.06 5.79 0.13 0.10
5.19
38.000 29.000 -1.0 2.5 119.0 124.0 2.0 164.0 156.0 3.30 3.00 222 46.3 0.1095 3.06
1.4961 1.1417 -0.04 0.10 4.69 4.88 0.08 6.46 6.14 0.13 0.12
6.74
38.000 32.000 -1.5 3.0 126.0 130.0 2.5 187.0 181.0 3.20 7.20 219 59.9 0.1012 5.24
1.4961 1.2598 -0.06 0.12 4.96 5.12 0.10 7.36 7.13 0.12 0.28
11.55
53.000 46.000 -8.6 3.0 124.0 129.0 2.5 190.0 179.0 6.40 3.00 261 55.9 0.1146 7.18
2.0866 1.8110 -0.34 0.12 4.88 5.08 0.10 7.48 7.05 0.25 0.12
15.82
58.000 50.000 -9.4 3.0 133.0 137.0 2.5 204.0 192.0 7.80 3.00 329 52.3 0.1253 9.85
2.2835 1.9685 -0.37 0.12 5.24 5.39 0.10 8.03 7.56 0.31 0.12
21.72
29.000 23.000 0.3 1.5 127.0 129.0 1.5 160.0 155.0 1.10 3.10 222 114 0.1332 1.79
1.1417 0.9055 0.01 0.06 5.00 5.08 0.06 6.30 6.10 0.04 0.12
3.95
38.000 29.000 1.8 2.5 130.0 136.0 2.0 174.0 165.0 1.90 4.10 255 66.2 0.1100 3.27
1.4961 1.1417 0.07 0.10 5.12 5.35 0.08 6.85 6.50 0.07 0.16
7.22
38.000 29.000 1.5 5.0 130.0 141.0 2.0 174.0 165.0 3.50 3.00 255 58.3 0.1169 3.26
1.4961 1.1417 0.06 0.20 5.12 5.55 0.08 6.85 6.50 0.14 0.12
7.19
40.000 34.000 0.3 3.0 136.0 140.0 2.5 201.0 195.0 3.70 6.20 252 64.7 0.1072 6.24
1.5748 1.3386 0.01 0.12 5.35 5.51 0.10 7.91 7.68 0.15 0.25
13.75
58.000 50.000 -10.2 3.0 135.0 147.0 2.5 204.0 191.0 5.50 6.50 352 68.2 0.1208 9.26
2.2835 1.9685 -0.40 0.12 5.31 5.79 0.10 8.03 7.52 0.22 0.26
20.42
45.000 34.000 -1.0 2.5 142.0 148.0 2.0 192.0 184.0 3.50 3.60 340 97.2 0.1190 4.95
1.7717 1.3386 -0.04 0.10 5.59 5.83 0.08 7.56 7.24 0.14 0.14
10.92
40.000 34.000 2.0 4.0 146.0 152.0 3.0 217.0 210.0 2.80 7.10 287 76.9 0.1118 7.06
1.5748 1.3386 0.08 0.16 5.75 5.98 0.12 8.54 8.27 0.11 0.28
15.56
32.000 25.000 2.3 2.0 148.0 151.0 1.5 184.0 179.0 1.60 2.70 314 144 0.1509 2.51
1.2598 0.9843 0.09 0.08 5.83 5.94 0.06 7.24 7.05 0.06 0.11
5.53
45.000 34.000 1.5 6.5 151.0 166.0 2.0 203.0 193.0 3.10 3.60 375 108 0.1250 5.24
1.7717 1.3386 0.06 0.26 5.94 6.54 0.08 7.99 7.60 0.12 0.14
11.55
42.000 36.000 2.8 4.0 157.0 164.0 3.0 233.0 227.0 3.30 8.30 348 75.7 0.1191 8.23
1.6535 1.4173 0.11 0.16 6.18 6.46 0.12 9.17 8.94 0.13 0.33
18.14
38.000 30.000 -1.5 2.5 160.0 163.0 2.0 203.0 197.0 1.60 3.90 429 157 0.1167 4.00
1.4961 1.1811 -0.06 0.10 6.30 6.42 0.08 7.99 7.76 0.06 0.15
8.82
48.001 36.000 1.0 3.0 163.0 169.0 2.5 217.0 206.0 4.80 4.30 437 115 0.1314 6.38
1.8898 1.4173 0.04 0.12 6.42 6.65 0.10 8.54 8.11 0.19 0.17
14.06
45.000 38.000 3.6 4.0 168.0 174.0 3.0 250.0 245.0 3.00 7.50 407 78.1 0.1254 11.08
1.7717 1.4961 0.14 0.16 6.61 6.85 0.12 9.84 9.65 0.12 0.29
24.43
51.000 38.000 1.8 3.0 174.0 181.0 2.5 234.0 221.0 3.50 4.00 522 134 0.1166 7.90
2.0079 1.4961 0.07 0.12 6.85 7.13 0.10 9.21 8.70 0.14 0.16
17.42
B
Caption:
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Continued on next page.
TIMKEN PRODUCTS CATALOG B321
•
Caption:
Caption:
ROLLER BEARINGS
Dimensions, mm (inches)
Load Ratings, N (lbf.)
Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number
Caption:
IsoClassTM METRIC 30000
d D T C1 e Y C90 Ca90 K C0 Inner Outer
170.000 230.000 38.000 333000 0.38 1.57 86200 56600 1.52 652000
32934 32934
32936 32936
32036X 32036X
32038X 32038X
32940 32940
32944 32944
32044X 32044X
32956 32956
32064X 32064X
32972 32972
6.6929 9.0551 1.4961 74800 19400 12700 146000
180.000 250.000 45.000 376000 0.48 1.25 97500 80200 1.22 739000
B
7.0866 9.8425 1.7717 84600 21900 18000 166000
180.000 280.000 64.000 722000 0.42 1.42 187000 135000 1.38 1280000
7.0866 11.0236 2.5197 162000 42100 30500 287000
190.000 290.000 64.000 734000 0.44 1.36 190000 144000 1.32 1330000
7.4803 11.4173 2.5197 165000 42800 32400 298000
200.000 280.000 51.000 522000 0.39 1.52 135000 91300 1.48 1050000
7.8740 11.0236 2.0079 117000 30400 20600 237000
220.000 300.000 51.000 550000 0.43 1.41 143000 104000 1.37 1090000
Caption:
8.6614 11.8110 2.0079 124000 32100 23400 245000
220.000 340.000 76.000 975000 0.43 1.39 253000 186000 1.36 1800000
8.6614 13.3858 2.9921 219000 56800 41800 405000
280.000 380.000 63.500 833000 0.43 1.39 216000 160000 1.35 1780000
11.0236 14.9606 2.5000 187000 48600 36000 401000
320.000 480.000 100.000 1770000 0.46 1.31 459000 360000 1.27 3420000
T
C
12.5984 18.8976 3.9370 398000 103000 80900 768000
360.000 480.000 76.000 1220000 0.46 1.31 317000 249000 1.27 2780000
14.1732 18.8976 2.9921 275000 71400 56100 624000
(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
(3) Negative value indicates effective center inside cone backface.
(4) These maximum ?llet radii will be cleared by the bearing corners.
(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
D
B
d
a
•
B322 TIMKEN PRODUCTS CATALOG
Tapered - IsoClassTM Metric 30000 Series
38.000 30.000 3.8 2.5 179.0 183.0 2.0 223.0 215.0 2.10 4.60 519 180 0.1305 4.40
1.4961 1.1811 0.15 0.10 7.05 7.20 0.08 8.78 8.46 0.08 0.18
9.71
45.000 34.000 8.9 2.5 191.0 196.0 2.0 241.0 232.0 3.60 3.40 569 184 0.1211 6.51
1.7717 1.3386 0.35 0.10 7.52 7.72 0.08 9.49 9.13 0.14 0.13
14.34
64.000 48.000 -3.6 3.0 197.0 203.0 2.5 270.0 256.0 6.20 3.70 773 147 0.1298 11.39
2.5197 1.8898 -0.14 0.12 7.76 7.99 0.10 10.63 10.08 0.25 0.15
25.10
64.000 48.000 -0.5 3.0 207.0 214.0 2.5 282.0 267.0 6.40 3.90 842 161 0.1353 14.81
2.5197 1.8898 -0.02 0.12 8.15 8.43 0.10 11.10 10.51 0.25 0.15
32.65
51.000 39.000 3.3 3.0 213.0 217.0 2.5 272.0 262.0 3.30 3.50 848 220 0.1300 9.45
2.0079 1.5354 0.13 0.12 8.39 8.54 0.10 10.71 10.31 0.13 0.14
20.83
51.000 39.000 8.1 3.0 232.0 237.0 2.5 290.0 281.0 4.80 3.10 909 152 0.1361 9.90
2.0079 1.5354 0.32 0.12 9.13 9.33 0.10 11.42 11.06 0.19 0.12
21.83
76.000 57.000 -3.3 4.0 241.0 248.0 3.0 325.0 312.0 10.20 4.30 1210 128 0.1509 24.04
2.9921 2.2441 -0.13 0.16 9.49 9.76 0.12 12.80 12.28 0.40 0.17
53.01
63.500 48.000 11.4 3.0 296.0 300.0 2.5 368.0 356.0 7.40 3.40 1700 236 0.1680 19.87
2.5000 1.8898 0.45 0.12 11.65 11.81 0.10 14.49 14.02 0.29 0.13
43.81
100.000 74.000 4.3 5.0 343.0 357.0 4.0 461.0 442.0 13.50 5.20 2670 201 0.1998 59.73
3.9370 2.9134 0.17 0.20 13.50 14.06 0.16 18.15 17.40 0.53 0.21 131.68
76.000 57.000 20.6 4.0 378.0 385.0 3.0 466.0 451.0 10.80 4.10 2980 344 0.2061 36.43
2.9921 2.2441 0.81 0.16 14.88 15.16 0.12 18.35 17.76 0.43 0.16
80.31
(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.
(7) Compound radius on inner race. Details on drawing for bearing.
(8) Pin-type cage. Please consult The Timken Company.
Dimensions, mm (inches)
max shaft backing backing backing ?llet radius shoulder dia. shoulder dia. shoulder dia.
Factors
Weight
kg (lbs.)
Bearing
Housing
Shaft
Cage
B C a(3) R(4) da db r (4) Da Db Aa Ab G1 G2 Cg
B
Caption:
TIMKEN PRODUCTS CATALOG B323
•
ROLLER BEARINGS
Caption:
NOTES
B
B
Caption:
•
B324 TIMKEN PRODUCTS CATALOG
Radial Cylindrical
RADIAL CYLINDRICAL ROLLER BEARINGS
Overview: A radial cylindrical roller bearing consists of an inner and/or outer ring, a roller retaining cage and a complement of controlled contour cylindrical rollers. Depending on the style of bearing, either the inner or the outer ring will have two roller guiding ribs. The other ring, separable from the assembly, has one rib or none. The ring with two ribs axially locates the position of the roller assembly. The diameters of these ribs may be used to support the roller cage. One of the ribs may carry light thrust loads when an opposing rib is provided in the mating ring.
• Sizes: 15 mm - 65 mm (0.5906 in. to 2.5591 in.) and 100 mm - 600 mm (4 in. - 27.20 in.).
• Markets: Power generation, oil ?eld, mining and aggregate processing, gear drives and rolling mills.
• Features: Extensive product range for integration into heavy-duty industrial applications.
• Bene?ts: Accommodate heavy radial loads through expertly designed critical dimensions, such as roller and raceway diameter and contact geometry.
A
B
A
Caption:
Caption:
Caption:
FPO
TIMKEN PRODUCTS CATALOG B325
•
Caption:
ROLLER BEARINGS
Radial Cylindrical Roller Bearings
Bore
inch:
metric: 200 20.0 in. 200 200 mm
42 4.25 in. 210 210 mm
43 4.375 in. 220 220 mm standard sizes standard sizes are 4 - 27.20 inch are 100 - 600 mm
Standard Styles inch/metric
Standard Styles inch/metric
RIU,RU,NU RIN,RN,N RIJ,RJ,NJ RIF,RF,NF RIT,RT,NUP RIP,RP,NP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
B
METRIC
200 RU 02 OA107
R3
Modi?cations:
(First two letters are assigned by Timken engineers) letter other than “O” in ?rst position indicates modi?cation to inner ring.
Letter other than “O” in second position indicates modi?cation to outer ring.
Common Modi?cations:
101 outer ring with special lubrication hole size 107 outer ring with standard lubrication holes and
machined lubrication groove in center of O.D. 127 steel cage
132 wide inner ring
229 rings and rollers made of carburized grade steel 305 inner ring with oversize bore outer ring with
standard lubrication holes and machined lubrication groove in center of O.D.
334 centri?cally cast brass cage 771 mark bearings serially
Series:
two digits indicates metric envelope dimensions three digits indicates inch envelope dimensions
Radial Internal Clearance: R1 < R2
R2 < R3
R3 = Standard
R4 > R3
R5 > R4
C2 < C0 C0 < C3 C3 < C4 C4 < C5 C5
Caption:
A
Cylindrical Roller Radial Bearings - Metric Nominal Dimensions
Pre?x
NJ = cylindrical roller radial bearing (two ribs on outer ring, one rib on inner ring)
NU = cylindrical roller radial bearing (two ribs on outer ring, cylindrical inner ring)
NUP = cylindrical roller radial bearing (two ribs on outer ring, one ?xed rib and one loose rib/?at washer on inner ring)
RNU = cylindrical roller radial bearing (two ribs on outer ring, without an inner ring)
Inner Ring Bore Diameter
02 = 15 mm
03 = 17 mm
(for inner ring bore > 20 mm): bore code x 5 = bore diameter 04 = 4 x 5 = 20 mm
NJ 2 04
E.TVP
Series
10 = width series 1; diameter series 0 (dimension series 10)
2 = width series 0; diameter series 2 (dimension series 02) 22 = width series 2; diameter series 2 (dimension series 22)
3 = width series 0; diameter series 3 (dimension series 03) 23 = width series 2; diameter series 3 (dimension series 23)
Suf?x
E.TVP = “E” design bearing,
molded reinforced polymer window-type cage
M = machined brass cage
•
B326 TIMKEN PRODUCTS CATALOG
Caption:
B
Radial Cylindrical Roller Bearings
Page
METRIC SERIES (SMALL BORE)
Types ..........................................................................................B328
Construction .............................................................................B328
Dimensional Accuracy ..............................................................B329
Mounting ...................................................................................B329
Load Ratings .............................................................................B331
CYLINDRICAL ROLLER RADIAL BEARINGS SINGLE-ROW
Bearing Types .........................................................................B333
Metric Series .............................................................................B335
Standard Series ........................................................................B339
5200, A5200 Metric Series ......................................................B346
5200, A5200 Metric Series
Shaft and Housing Fits and Tolerances .............................B347
Type NCF/NU size range:
200 mm - 1300 mm (7.87 in. - 51.18 in.) ............................ B349
Caption:
A
TIMKEN PRODUCTS CATALOG B327
•
Caption:
ROLLER BEARINGS
SINGLE-ROW RADIAL BEARINGS – METRIC SERIES
The Timken radial cylindrical roller bearing has integral end ribs on the outer ring for end guiding the cylindrical rollers. The inner ring is separable for simpli?ed mounting and removal.
All NU design bearings are available on request without inner rings. For this requirement add letter R in the pre?x.
The modi?ed line contact between the cylindrical rollers and raceways reduces edge stressing.
REFERENCE STANDARDS ARE:
• DIN 5412 single-row cylindrical roller bearings.
• ISO 246 & DIN 5412 angle rings (thrust collar).
A
B
TYPES OF METRIC SERIES CYLINDRICAL ROLLER RADIAL BEARINGS
TYPES OF METRIC SERIES CYLINDRICAL ROLLER RADIAL BEARINGS
Caption:
A
NU
NU
NUP
NUP
NJ
NJ
SUFFIXES
E.TVP E-design bearing, molded window type cage of engineered polymer.
M Machined brass cages.
CONSTRUCTION
Cylindrical roller radial bearings can be recognized by the arrangement of their end ribs. Bearings of NU design have two ribs on the outer ring, the inner ring being cylindrical, making them well-suited for use as ?oating bearings. They are separable, which simpli?es mounting and removal. Radial cylindrical roller bearings of NJ design have two ribs on the outer ring and one rib on the inner ring. They can accept axial loading in one direction.
Bearings of NUP design have two ribs on the outer ring, and one ?xed and one loose rib (a ?at washer) on the inner ring. These radial cylindrical roller bearings are used for locating purposes and can accept reversing axial loading. A radial cylindrical roller bearing of NJ design with an HJ Type thrust collar forms a locating bearing similar to the NUP design.
Cylindrical roller bearings of RNU Type, available on request, are supplied without an inner ring so that the cylindrical rollers run directly on a hardened and ground shaft. For most general applications, the shaft may be machined to g6 and the housing bore to K6 tolerances.
CAGE DESIGNS
The majority of cylindrical roller bearings of series 2..E, 22..E,
3..E and 23..E use cages of glass-?ber reinforced nylon. This cage construction allows bearings to be designed with maximum load carrying capability. These cages can also be used at operating temperatures of up to 120° C over extended periods. When bearings are lubricated with an oil, presence of additives may reduce operating life if the temperature exceeds 100° C over extended periods. Furthermore, stagnant oil may affect the performance of the cage at these temperatures, requiring oil change intervals to be strictly observed.
Suffix M indicates that the bearings use machined brass cages.
•
B328 TIMKEN PRODUCTS CATALOG
Radial Cylindrical
DIMENSIONAL ACCURACY TOLERANCES AND BEARING CLEARANCE
For metric series bearings
TABLE 1 –
ABUTMENT DIMENSIONS AS SPECIFIED IN DIN 5418 FOR METRIC SERIES BEARINGS
Metric series radial cylindrical roller bearings are available in various tolerance classes and clearance groups. Single-row cylindrical roller bearings are made to normal clearance group C0, although bearings with radial clearance groups C2, C3 and C4 may be obtained on request.
For tolerances of radial cylindrical roller bearings see the engineering section. For radial internal clearances of radial cylindrical roller bearings see the engineering section.
ALIGNMENT
The modified line contact between the cylindrical rollers and raceways of cylindrical roller bearings reduces stress concentration at ends of the rollers and provides some aligning capability. The angular alignment of single-row cylindrical roller bearings must not exceed a maximum of four angular minutes at a .001% load of C/P?5= equivalent dynamic load, kN. At higher applied loads, or with presence of greater misalignment, consultation with Timken engineering is strongly encouraged.
The bearing inner and outer rings should be mounted against the stepped portion on the shaft and the shoulder of the housing. Under no circumstances should they interfere with the shaft or housing ?llets. For this reason, the maximum ?llet radius ras max
of the mating component must be no greater than the minimum chamfer dimension of the corresponding cylindrical roller bearing ring corner rs min.
The shoulder of the mating components must be such that, even with the maximum permissible single chamfer dimension of the corresponding bearing ring, there is an adequate contact surface area. Table 1 lists the maximum ?llet radius ras max and the minimum shoulder height. At high axial loads the ribs must be supported over half their height.
where from bearing tables:
F raceway diameter of the inner ring E raceway diameter of the outer ring J rib diameter of the inner ring
H rib diameter of the outer ring
The shaft can be mounted and removed if the mounting dimensions shown in Table 2 on page B330 are observed.
r ra
B
A
r h
r h
r ra
rs min ras max
h min
BEARING SERIES
10 2..E
3..E
22..E
23..E
mm
A
Caption:
MOUNTING DIMENSIONS
0.3
0.3
1 1.2
0.6
0.6
1.6 2.1
1
1
2.3 2.8
1.1
1
3 3.5
1.5
1.5
3.5 4.5
2
2
4.4 5.5
2.1
2.1
5.1 6
3
2.5
6.2 7
4
3
7.3 8.5
5
4
9 10
11.5 13
See the Needle section for cylindrical roller bearings with inner rings.
6
5
(H + E and F + J)
2 2
TIMKEN PRODUCTS CATALOG B329
•
Caption:
ROLLER BEARINGS
D1
D2
D3
D1
D3
A
B
NU
NU
NUP
NUP
NJ
NJ
TABLE 2 – MOUNTING DIMENSIONS FOR METRIC SERIES SINGLE-ROW CYLINDRICAL ROLLER BEARINGS
Bore Shaft
BEARING SERIES
10 22..E 2..E 23..E 3..E
Reference Dia.
Number
D1 D2 D1 D2 D3 D1 D2 D3 mm max. min. max. min. min. max. min. min.
02
15
20
23
26
03
17
21
25
27
24
27
30
Caption:
04
20
25 27 26
29
32
27
30
33
A
05
25
30 32 31
34
37
33
37
40
06
30
35 38 37
40
44
40
44
48
07
35
41 44 43
46
50
45
48
53
08
40
46 49 49
52
56
51
55
60
09
45
52 54 54
57
61
57
60
66
10
50
57 59 58
62
67
63
67
73
11
55
63 66 65
68
73
69
72
80
12
60
68 71 71
75
80
75
79
86
13
65
73 76 77
81
87
81
85
93
14
70
78 82 82
86
92
87
92
100
15
75
83 87 87
90
96
93
97
106
16
80
90 94 94
97
104
99
105
114
•
B330 TIMKEN PRODUCTS CATALOG
Radial Cylindrical
LOAD RATINGS CYLINDRICAL ROLLER BEARING
MAXIMUM ALLOWABLE AXIAL LOAD
Metric series cylindrical roller bearings of NUP, NJ, as well as NU or NJ designs with a thrust collar can transmit axial loads if they are radially loaded at the same time. The allowable axial load ratio Fa/C of 0.1 maximum depends to a great extent on the magnitude of radial load, the operating speed, type of lubricant used, the operating temperature, and heat transfer conditions at the bearing location. The heat balance achieved at the bearing location is used as a basis for determination of the allowable axial load.
The nomogram on page B332 should be used to determine the allowable axial load Faz based on the following operating conditions:
• The axial load is of constant direction and magnitude. • Radial load ratio Fr/C < 0.2.
• Ratio of axial load to radial load Fa/Fr<0.4.
• The temperature of the bearing is 80° C at an ambient temperature of 20° C.
• Lubricating oil is ISO VG 100 using oil bath lubrication or circulating oil.
• As an alternative, the bearing may be lubricated with a grease using the above speci?ed base oil and viscosity. Use of EP additives will be necessary, although considerably shorter relubrication intervals may be expected than with purely radially loaded radial cylindrical roller bearings.
EXAMPLE OF USING THE NOMOGRAM
From the lower part of the nomogram, determine the intersection point of the inner ring bore diameter and the dimension series of the bearing. From the upper part, the allowable axial load ratio Faz/C can be found as a function of the operating speed, n.
For a cylindrical roller radial bearing NU2207E.TVP C = 63 kN; d = 35 mm
n = 2000 RPM
Fr = 10 kN
From the nomogram:
Faz/C = 0.06
Then Faz = 0.06 • 63
The calculated allowable axial load Faz is 3.78 kN
It should be noted that an axial load as high as that determined by means of the nomogram should not be applied if an oil of rated kinematic viscosity lower than ISO VG 100 is used. Suitable EP additives, which are known for fatigue life improving qualities, may allow for an increase in applied axial load subject to thorough testing.
HIGHER APPLIED AXIAL LOADS
Axial loads greater than those determined by means of the nomogram may be considered, providing they are to be applied intermittently. Also, the bearing should be cooled using circulating oil lubrication. If the operating temperature, due to the internal friction and the higher axial load, exceeds 80° C, a more viscous oil must be used.
B
A
A
Caption:
TIMKEN PRODUCTS CATALOG B331
•
ROLLER BEARINGS
Caption:
NOMOGRAM FOR DETERMINING THE ALLOWABLE AXIAL LOAD Faz
Operating speed n
7500 5000 2000 1000 500 200 100 50 20
rpm
0.10
0.09
A
B
0.08
0.07
10000
0.06
0.05
0.04
Faz
0.03
C
Caption:
A
0.02
0.01
Dimension series
10
2..E
3..E, 22..E
23..E
Bearing bore
d mm
1000
700
500
400
300
200
100
70
50
40
30
20
10
•
B332 TIMKEN PRODUCTS CATALOG
Page 4-18/19
rev1.20Jan99
Radial Cylindrical
INTRODUCTION
Timken heavy-duty radial cylindrical roller bearings are designed to provide the highest possible radial capacity for a given cross section, and to perform under heavy radial loads.
These bearings incorporate improved internal proportions developed through computer-assisted optimization studies to make maximum use of the total available cross-sectional area. Controlled contour rollers redistribute end-stress concentration and provide more uniform distribution of the applied load.
Cylindrical roller bearings with bore sizes from 100 mm (3.937 in.) up to 700 mm (27.5 in.) are shown in this catalog, and even larger
sizes can be provided on special order. Consult your Timken representative for complete information on your bearing size requirements.
The standard cylindrical roller bearing furnished consists of an outer ring, a complement of controlled contour rollers, a cage and an inner ring. The 5200 Series bearings include styles without an inner ring for applications where the shaft functions as the inner ring. Bearing rings and rollers are manufactured from bearing-quality steel.
B
A
BEARING TYPES STANDARD SIZES
Six standard styles of cylindrical roller bearings are listed in this section of the catalog. All six styles have the same roller complement for a given cross section or envelope and, therefore, the same radial load capacity.
In all six styles, one ring (either the inner or the outer) has two integral roller-guiding ribs. The other ring is separable from the assembly and has either one integral rib or none. The two-rib ring locates the roller complement axially, and the ground diameter of the ribs may be used to support the cage.
Moderate thrust loads from one direction only are acceptable for those styles with three integral ribs (RJ, RF, RT and RP). The decision as to which ring should be double-ribbed is determined by conditions of assembly and mounting procedures in a speci?c application. Standard cage material is fully machined brass with stamped steel also available.
For convenience, all six styles of bearings are listed in the dimension tables in order of ascending bore size, with both inch and metric sizes indicated for each bearing. ABMA designations are used for these bearings. Inch-sized bearings are identi?ed by the letter “I” with the part number in bold type. RIU, for example, indicates an inch bearing, while RU indicates the equivalent style in metric dimensions.
All types can be mounted with interference ?ts on either inner or outer ring (or both). In the latter case, a bearing with increased internal clearance must be speci?ed to provide proper running clearance.
Caption:
A
RIU, RU
These bearings carry radial load only and can accommodate expansion or contraction. The relative axial displacement of one ring to the other occurs with minimum friction while the bearing is rotating. These bearings may be used in one or two positions for shaft support if other means of axial location are provided. The outer ring has two integral ribs while the inner ring has a cylindrical O.D. without ribs.
RIU, RU, NU
RIU, RU
RIN, RN
This series has the same characteristics as RIU and RU, bearings except that two ribs are incorporated in the inner ring, and the outer ring has a cylindrical bore without ribs.
RIN, RN, N
RIN, RN
TIMKEN PRODUCTS CATALOG B333
•
ROLLER BEARINGS
RIJ, RJ
Types RIJ and RJ have double-ribbed outer and single-ribbed inner rings and can support heavy radial loads, as well as light unidirectional thrust loads up to 10 percent of the radial load. The thrust load is transmitted between the diagonally opposed rib faces in a sliding rather than a rolling action. Thus, when limiting thrust conditions are approached, lubrication can become critical.
Your Timken representative should be consulted for such applications. When thrust loads are very light, these bearings may be used in an opposed mounting to locate the shaft. In these cases, shaft endplay should be adjusted at time of assembly.
RIF, RF
This type has the same characteristics as RIJ and RJ, except it incorporates a double-ribbed inner ring and a single-ribbed outer ring.
RIT, RT
These types have a double-ribbed outer ring and a single-ribbed inner ring with an abutting loose rib, which allows the bearing to provide axial location and to carry light thrust loads in both directions. Factors governing radial and thrust capacities are the same as for RIJ and RJ.
A type RIT or RT bearing may be used in conjunction with a type RN or RU bearing for applications where axial shaft expansion is anticipated. In these cases, the ?xed bearing is usually placed nearest the drive end of the shaft to minimize alignment variations in the drive. Shaft endplay (or ?oat) is determined by the axial clearance in the bearing.
RIP, RP
These types have the same characteristics as RIT and RT, except the inner ring is double-ribbed with a loose abutting rib.
B334 TIMKEN PRODUCTS CATALOG
Caption:
RIJ, RJ
A
B
RIJ, RJ, NJ
2)& 2&
Caption:
A
RIF, RF, NF
RIT, RT
RIT, RT, NUP
RIP, RP
RIP, RP, NP
•
Radial Cylindrical
5200 METRIC SERIES
The Timken 5200 metric cylindrical roller bearing offers an enhanced radial capacity in most applications due to its internal design proportions. The outer ring of a 5200 Series bearing is double-ribbed to create a recessed raceway for the complement of rollers. Style A-5200, which ?ts the widest variety of applications in industry, includes a full-width plain inner ring.
Because of the manufacturing tolerances established by Timken for the 5200 Series, components for any one cross section are interchangeable. This enables Timken to supply ?nished 5200 Series bearings to customers quickly from our complete inventory. 5200 Series bearings are available with bore sizes from 100 mm to 240 mm (3.9370 in. to 9.4488 in.).
The designer also is offered the option of specifying these bearings without the inner ring, for installations with limited radial cross sections. In these installations, the shaft serves as the inner ring and must therefore be hardened to Rc58 (minimum) and ground to a 14Ra or better surface ?nish.
The 5200 Series bearings are supplied with a stamped steel cage that is land-riding on the outer ring ribs (indicated by the suf?x “S” on the catalog number). The cage is designed to provide free-rolling separation and also to retain the rollers. If the bearing is to be used under special conditions, such as reversing or high-speed applications, a machined brass cage is available (suf?x “M” on catalog number). Your Timken representative should be consulted for speci?c suggestions.
The outer rings and rollers of 5200 Series bearings are made from bearing-quality alloy steel. The inner rings are deep-case hardened to accommodate the hoop stresses resulting from heavy press ?ts.
When supplied with an inner ring, all 5200 Series bearings have an R6 radial internal clearance as standard (see page B348). Other radial internal clearances can be provided as required by using a different inner ring. Proper roller guidance is assured by integral ribs and roller end-clearance control.
B
A
Caption:
A
5200
This type carries radial load only and has a double-ribbed outer ring. It has enhanced radial capacity due to internal design proportions. The bearings are useful for installations in which limited radial cross section is available where the shaft serves as the inner ring.
5200
5200 WS
5200 WS
5200 WS
A-5200-WS
This type has the same characteristics as the 5200, except, includes a full-width cylindrical O.D. inner ring.
A5200 WS
A-5200-WS
A5200 WS
A5200 WS
A-5200-WM
This type has the same characteristics as the WS except, with a machined brass cage.
A-52XX-WM
A-52XX-WM
A-52XX-WM
A-52XX-WM
TIMKEN PRODUCTS CATALOG B335
•
ROLLER BEARINGS
Caption:
CYLINDRICAL ROLLER RADIAL BEARINGS SINGLE-ROW METRIC SERIES
B
B
NU
NJ
a
a
r
r1
r
r
r
r
r1
r1
d
r
r
E
d
E
J
D
J
B
B
NJ
r1
r1
A
r1
r
r1
s
H
d
d1 J
E D
J
F
B
b
NUP
B
s
b
H
E
H
d
E
d
F
D
F
D
J
D
d1
B
B
NU
NJ with HJ
NU
NU
NJ
NJ
NUP
Fillet Lubri- Reference Thermal
Min Radius Backing Dia. Rib Dia. Load Ratings cation Speed Ratings Wt. Bearing Bore O.D. Width Outer Inner Shaft Housing Inner Outer Static Dynamic Factor Brg. Thrust Number d or d1 D B r r1 E F J H a b s C0 C Cg Grease Oil Collar
r
r
Caption:
A
mm mm mm mm mm mm mm mm mm mm mm mm kN kN RPM RPM kg kg in. in. in. in. in. in. in. in. in. in. in. in. lbs. lbs. lbs. lbs.
r1
r1
r
r
NJ202E.TVP 15 35 11 0.3 0.6 19.3 30.3 21.8 27.8 5.0 2.5 11.6 13.9 0.0327 14000 17000 0.047 0.015
0.5906 1.3780 0.4331 0.01 0.02 0.76 1.19 0.86 1.09 0.20 0.10 2610 3120
0.104 0.007
NU202E.TVP 15 35 11 0.3 0.6 19.3 30.3 27.8 1.0 11.6 13.9 0.0327 14000 17000 0.047
0.5906 1.3780 0.4331 0.01 0.02 0.76 1.19 1.09 0.04 2610 3120
0.104
NJ203E.TVP 17 40 12 0.3 0.6 22.1 35.1 24.7 32.0 5.5 3.0 16.0 18.9 0.0366 12000 15000 0.068 0.020
0.6693 1.5748 0.4724 0.01 0.02 0.87 1.38 0.97 1.26 0.22 0.12 3600 4250
0.150 0.009
NU203E.TVP 17 40 12 0.3 0.6 22.1 35.1 32.0 1.2 16.0 18.9 0.0366 12000 15000 0.068
0.6693 1.5748 0.4724 0.01 0.02 0.87 1.38 1.26 0.05 3600 4250
0.150
NUP203E.TVP 17 40 12 0.3 0.6 22.1 35.1 24.7 32.0 16.0 18.9 0.0366 12000 15000 0.068
0.6693 1.5748 0.4724 0.01 0.02 0.87 1.38 0.97 1.26 3600 4250
0.150
NJ2203E.TVP 17 40 16 0.3 0.6 22.1 35.1 24.7 32.0 6.0 3.0 23.3 25.3 0.0402 11000 13000 0.091 0.022
0.6693 1.5748 0.6299 0.01 0.02 0.87 1.38 0.97 1.26 0.24 0.12 5240 5690
0.201 0.010
NU2203E.TVP 17 40 16 0.3 0.6 22.1 35.1 32.0 1.0 23.3 25.3 0.0402 11000 13000 0.091
0.6693 1.5748 0.6299 0.01 0.02 0.87 1.38 1.26 0.04 5240 5690
0.201
NUP2203E.TVP 17 40 16 0.3 0.6 22.1 35.1 24.7 32.0 23.3 25.3 0.0402 11000 13000 0.091
0.6693 1.5748 0.6299 0.01 0.02 0.87 1.38 0.97 1.26 5240 5690
0.201
NJ303E.TVP 17 47 14 0.6 1.1 24.2 40.2 27.6 36.8 6.5 4.0 22.8 26.7 0.0392 11000 13000 0.121 0.012
0.6693 1.8504 0.5512 0.02 0.04 0.95 1.58 1.09 1.45 0.26 0.16 5130 6000
0.267 0.026
NU303E.TVP 17 47 14 0.6 1.1 24.2 40.2 36.8 1.2 22.8 26.7 0.0392 11000 13000 0.121
0.6693 1.8504 0.5512 0.02 0.04 0.95 1.58 1.45 0.05 5130 6000
0.267
NJ204E.TVP 20 47 14 0.6 1.0 26.5 41.5 29.9 38.4 5.5 3.0 26.5 29.0 0.0436 11000 13000 0.133 0.024
0.7874 1.8504 0.5512 0.02 0.04 1.04 1.63 1.18 1.51 0.22 0.12 5960 6520
0.293 0.011
NU204E.TVP 20 47 14 0.6 1.0 26.5 41.5 38.4 1.0 26.5 29.0 0.0436 11000 13000 0.133
0.7874 1.8504 0.5512 0.02 0.04 1.04 1.63 1.51 0.04 5960 6520
0.293
NUP204E.TVP 20 47 14 0.6 1.0 26.5 41.5 29.9 38.4 26.5 29.0 0.0433 11000 13000 0.133
0.7874 1.8504 0.5512 0.02 0.04 1.04 1.63 1.18 1.51 5960 6520
0.293
NJ2204E.TVP 20 47 18 0.6 1.0 26.5 41.5 29.9 38.4 6.5 3.0 32.7 34.1 0.0459 9400 11000 0.142 0.012
0.7874 1.8504 0.7087 0.02 0.04 1.04 1.63 1.18 1.51 0.26 0.12 7350 7670
0.313 0.026
NU2204E.TVP 20 47 18 0.6 1.0 26.5 41.5 38.4 1.8 32.7 34.1 0.0459 9400 11000 0.142
0.7874 1.8504 0.7087 0.02 0.04 1.04 1.63 1.51 0.07 7350 7670
0.313
NUP2204E.TVP 20 47 18 0.6 1.0 26.5 41.5 29.9 38.4 32.7 34.1 0.0459 9400 11000 0.142
0.7874 1.8504 0.7087 0.02 0.04 1.04 1.63 1.18 1.51 7350 7670
0.313
NJ304E.TVP 20 52 15 0.6 1.1 27.5 45.5 31.4 41.8 6.5 4.0 28.0 32.6 0.0435 10000 12000 0.152 0.017
0.7874 2.0472 0.5906 0.02 0.04 1.08 1.79 1.24 1.65 0.26 0.16 6290 7330
0.335 0.037
NU304E.TVP 20 52 15 0.6 1.1 27.5 45.5 41.8 1.1 28.0 32.6 0.0435 10000 12000 0.152
0.7874 2.0472 0.5906 0.02 0.04 1.08 1.79 1.65 0.04 6290 7330
0.335
NUP304E.TVP 20 52 15 0.6 1.1 27.5 45.5 31.4 41.8 28.0 32.6 0.0435 10000 12000 0.152
0.7874 2.0472 0.5906 0.02 0.04 1.08 1.79 1.24 1.65 6290 7330
0.335
NJ2304E.TVP 20 52 21 0.6 1.1 27.5 45.5 31.4 41.8 7.5 4.0 40.0 42.9 0.0475 8200 9800 0.207 0.020
0.7874 2.0472 0.8268 0.02 0.04 1.08 1.79 1.24 1.65 0.30 0.16 8990 9640
0.456 0.044
Page 4-1a
rev3.2Feb99
H
J
H
d
J
d
E D
F
E D
F
Page 4-20
B
B
NUP
NUP
Page 4-1
Page 4-1
rev2.1Dec98
rev2.1Dec98
•
B336 TIMKEN PRODUCTS CATALOG
Radial Cylindrical
NJ205E.TVP 25 52 15 0.6 1.0 31.5 46.5 34.9 43.3 6.0 3.0 29.8 31.0 0.0489 9600 12000 0.140 0.031
0.9843 2.0472 0.5906 0.02 0.04 1.24 1.83 1.37 1.70 0.24 0.12 6700 6970
0.309 0.014
NU205E.TVP 25 52 15 0.6 1.0 31.5 46.5 43.3 1.3 29.8 31.0 0.0489 9600 12000 0.140
0.9843 2.0472 0.5906 0.02 0.04 1.24 1.83 1.70 0.05 6700 6970
0.309
NUP205E.TVP 25 52 15 0.6 1.0 31.5 46.5 34.9 43.3 29.8 31.0 0.0486 9600 12000 0.140
0.9843 2.0472 0.5906 0.02 0.04 1.24 1.83 1.37 1.70 6700 6970
0.309
NJ2205E.TVP 25 52 18 0.6 1.0 31.5 46.5 34.9 43.3 6.5 3.0 36.7 36.5 0.0515 8100 9700 0.160 0.014
0.9843 2.0472 0.7087 0.02 0.04 1.24 1.83 1.37 1.70 0.26 0.12 8250 8210
0.353 0.031
NU2205E.TVP 25 52 18 0.6 1.0 31.5 46.5 43.3 1.7 36.7 36.5 0.0515 8100 9700 0.160
0.9843 2.0472 0.7087 0.02 0.04 1.24 1.83 1.70 0.07 8250 8210
0.353
NUP2205E.TVP 25 52 18 0.6 1.0 31.5 46.5 34.9 43.3 36.7 36.5 0.0515 8100 9700 0.160
0.9843 2.0472 0.7087 0.02 0.04 1.24 1.83 1.37 1.70 8250 8210
0.353
NJ305E.TVP 25 62 17 1.1 1.1 34.0 54.0 38.3 50.1 7.0 4.0 38.9 42.8 0.0508 8500 10000 0.243 0.025
0.9843 2.4409 0.6693 0.04 0.04 1.34 2.13 1.51 1.97 0.28 0.16 8750 9620
0.536 0.055
NU305E.TVP 25 62 17 1.1 1.1 34.0 54.0 50.1 1.5 38.9 42.8 0.0508 8500 10000 0.243
0.9843 2.4409 0.6693 0.04 0.04 1.34 2.13 1.97 0.06 8750 9620
0.536
NUP305E.TVP 25 62 17 1.1 1.1 34.0 54.0 38.3 50.1 38.9 42.8 0.0508 8500 10000 0.243
0.9843 2.4409 0.6693 0.04 0.04 1.34 2.13 1.51 1.97 8750 9620
0.536
NJ2305E.TVP 25 62 24 1.1 1.1 34.0 54.0 38.3 50.1 8.0 4.0 57.6 58.1 0.0561 6900 8300 0.348 0.026
0.9843 2.4409 0.9449 0.04 0.04 1.34 2.13 1.51 1.97 0.31 0.16 12900 13100
0.767 0.057
NU2305E.TVP 25 62 24 1.1 1.1 34.0 54.0 50.1 1.9 57.6 58.1 0.0561 6900 8300 0.348
0.9843 2.4409 0.9449 0.04 0.04 1.34 2.13 1.97 0.07 12900 13100
0.767
NJ206E.TVP 30 62 16 0.6 1.0 37.5 55.5 41.4 52.0 7.0 4.0 39.0 40.4 0.0552 8000 9700 0.206 0.055
1.1811 2.4409 0.6299 0.02 0.04 1.48 2.19 1.63 2.05 0.28 0.16 8770 9080
0.454 0.025
NU206E.TVP 30 62 16 0.6 1.0 37.5 55.5 52.0 1.4 39.0 40.4 0.0280 8000 9700 0.206
1.1811 2.4409 0.6299 0.02 0.04 1.48 2.19 2.05 0.06 8770 9080
0.454
NUP206E.TVP 30 62 16 0.6 1.0 37.5 55.5 41.4 52.0 39.0 40.4 0.0552 8000 9700 0.206
1.1811 2.4409 0.6299 0.02 0.04 1.48 2.19 1.63 2.05 8770 9080
0.454
NJ2206E.TVP 30 62 20 0.6 1.0 37.5 55.5 41.4 52.0 7.5 4.0 51.5 50.1 0.0591 6800 8100 0.255 0.025
1.1811 2.4409 0.7874 0.02 0.04 1.48 2.19 1.63 2.05 0.30 0.16 11600 11300
0.562 0.055
NU2206E.TVP 30 62 20 0.6 1.0 37.5 55.5 52.0 1.6 51.5 50.1 0.0591 6800 8100 0.255
1.1811 2.4409 0.7874 0.02 0.04 1.48 2.19 2.05 0.06 11600 11300
0.562
NUP2206E.TVP 30 62 20 0.6 1.0 37.5 55.5 41.4 52.0 51.5 50.1 0.0591 6800 8100 0.255
1.1811 2.4409 0.7874 0.02 0.04 1.48 2.19 1.63 2.05 11600 11300
0.562
NJ306E.TVP 30 72 19 1.1 1.1 40.5 62.5 45.1 58.3 8.5 5.0 52.1 54.6 0.0581 7400 8800 0.370 0.042
1.1811 2.8346 0.7480 0.04 0.04 1.59 2.46 1.78 2.30 0.33 0.20 11700 12300
0.816 0.093
NU306E.TVP 30 72 19 1.1 1.1 40.5 62.5 58.3 1.9 52.1 54.6 0.0581 7400 8800 0.370
1.1811 2.8346 0.7480 0.04 0.04 1.59 2.46 2.30 0.07 11700 12300
0.816
NUP306E.TVP 30 72 19 1.1 1.1 40.5 62.5 45.1 58.3 52.1 54.6 0.0581 7400 8800 0.370
1.1811 2.8346 0.7480 0.04 0.04 1.59 2.46 1.78 2.30 11700 12300
0.816
NJ2306E.TVP 30 72 27 1.1 1.1 40.5 62.5 45.1 58.3 9.5 5.0 79.5 75.9 0.0645 6000 7200 0.530 0.095
1.1811 2.8346 1.0630 0.04 0.04 1.59 2.46 1.78 2.30 0.37 0.20 17900 17100
1.169 0.043
NUP2306E.TVP 30 72 27 1.1 1.1 40.5 62.5 45.1 58.3 79.5 75.9 0.0642 6000 7200 0.530
1.1811 2.8346 1.0630 0.04 0.04 1.59 2.46 1.78 2.30 17900 17100
1.169
NJ207E.TVP 35 72 17 0.6 1.1 44.0 64.0 48.0 60.1 7.0 4.0 52.2 51.8 0.0624 6800 8200 0.303 0.073
1.3780 2.8346 0.6693 0.02 0.04 1.73 2.52 1.89 2.37 0.28 0.16 11700 11600
0.668 0.033
NU2207E.TVP 35 72 23 0.6 1.1 44.0 64.0 60.1 2.9 67.3 63.0 0.0664 6100 7300 0.395
1.3780 2.8346 0.9055 0.02 0.04 1.73 2.52 2.37 0.11 15100 14200
0.871
NUP2207E.TVP 35 72 23 0.6 1.1 44.0 64.0 48.0 60.1 67.3 63.0 0.0664 6100 7300 0.395
1.3780 2.8346 0.9055 0.02 0.04 1.73 2.52 1.89 2.37 15100 14200
0.871
NJ307E.TVP 35 80 21 1.1 1.5 46.2 70.2 51.2 65.7 9.5 6.0 66.4 67.3 0.0653 6700 7900 0.485 0.132
1.3780 3.1496 0.8268 0.04 0.06 1.82 2.76 2.02 2.59 0.37 0.24 14900 15100
1.069 0.060
NUP307E.TVP 35 80 21 1.1 1.5 46.2 70.2 51.2 65.7 66.4 67.3 0.0653 6700 7900 0.485
1.3780 3.1496 0.8268 0.04 0.06 1.82 2.76 2.02 2.59 14900 15100
1.069
NU2307E.TVP 35 80 31 1.1 1.5 46.2 70.2 65.7 3.0 102.0 93.7 0.0724 5600 6600 0.720
1.3780 3.1496 1.2205 0.04 0.06 1.82 2.76 2.59 0.12 22900 21100
1.588
NUP208E.TVP 40 80 18 1.1 1.1 49.5 71.5 54.1 67.3 57.7 57.3 0.0668 6200 7500 0.380
1.5748 3.1496 0.7087 0.04 0.04 1.95 2.81 2.13 2.65 13000 12900
0.838
Fillet Lubri- Reference Thermal
Min Radius Backing Dia. Rib Dia. Load Ratings cation Speed Ratings Wt. Bearing Bore O.D. Width Outer Inner Shaft Housing Inner Outer Static Dynamic Factor Brg. Thrust Number d or d1 D B r r1 E F J H a b s C0 C Cg Grease Oil Collar
mm mm mm mm mm mm mm mm mm mm mm mm kN kN RPM RPM kg kg in. in. in. in. in. in. in. in. in. in. in. in. lbs. lbs. lbs. lbs.
A
B
A
Caption:
Continued on next page.
•
TIMKEN PRODUCTS CATALOG B337
ROLLER BEARINGS
Caption:
CYLINDRICAL ROLLER RADIAL BEARINGS SINGLE-ROW METRIC SERIES - continued
B
B
NU
NJ
a
a
r
r1
r
r
r
r
r1
r1
d
r
r
E
d
E
J
D
J
B
B
NJ
r1
r1
A
r1
r
r1
s
H
d
d1 J
E D
J
F
B
b
NUP
B
s
b
H
E
H
d
E
d
F
D
F
D
J
D
d1
B
B
NU
NJ with HJ
NU
NU
NJ
NJ
NUP
Fillet Lubri- Reference Thermal
Min Radius Backing Dia. Rib Dia. Load Ratings cation Speed Ratings Wt. Bearing Bore O.D. Width Outer Inner Shaft Housing Inner Outer Static Dynamic Factor Brg. Thrust Number d or d1 D B r r1 E F J H a b s C0 C Cg Grease Oil Collar
r
r
Caption:
A
mm mm mm mm mm mm mm mm mm mm mm mm kN kN RPM RPM kg kg in. in. in. in. in. in. in. in. in. in. in. in. lbs. lbs. lbs. lbs.
r1
r1
r
r
NU2208E.TVP 40 80 23 1.1 1.1 49.5 71.5 67.3 2.3 79.8 73.8 0.0724 5300 6300 0.490
1.5748 3.1496 0.9055 0.04 0.04 1.95 2.81 2.65 0.09 17900 16600
1.080
NUP308E.TVP 40 90 23 1.5 1.5 52.0 80.0 57.7 74.9 82.7 84.0 0.0714 6000 7100 0.660
1.5748 3.5433 0.9055 0.06 0.06 2.05 3.15 2.27 2.95 18600 18900
1.455
NJ2308E.TVP 40 90 33 1.5 1.5 52.0 80.0 57.7 74.9 12.5 7.0 123.0 115.0 0.0788 5000 5900 0.950 0.091
1.5748 3.5433 1.2992 0.06 0.06 2.05 3.15 2.27 2.95 0.49 0.28 27700 25900
2.095 0.201
NU2209E.TVP 45 85 23 1.1 1.1 54.5 76.5 72.4 2.3 87.0 77.7 0.0775 4800 5700 0.530
1.7717 3.3465 0.9055 0.04 0.04 2.15 3.01 2.85 0.09 19600 17500
1.169
NUP2209E.TVP 45 85 23 1.1 1.1 54.5 76.5 59.1 72.4 87.0 77.7 0.0775 4800 5700 0.530
1.7717 3.3465 0.9055 0.04 0.04 2.15 3.01 2.33 2.85 19600 17500
1.169
NJ309E.TVP 45 100 25 1.5 1.5 58.5 88.5 64.6 83.1 11.5 7.0 104.0 101.0 0.0785 5500 6400 0.895 0.110
1.7717 3.9370 0.9843 0.06 0.06 2.30 3.48 2.54 3.27 0.45 0.28 23400 22700
1.973 0.243
NUP210E.TVP 50 90 20 1.1 1.1 59.5 81.5 64.1 77.4 74.5 67.7 0.0778 5500 6600 0.490
1.9685 3.5433 0.7874 0.04 0.04 2.34 3.21 2.52 3.05 16700 15200
1.080
NU2210E.TVP 50 90 23 1.1 1.1 59.5 81.5 77.4 2.2 94.1 81.2 0.0824 4400 5200 0.575
1.9685 3.5433 0.9055 0.04 0.04 2.34 3.21 3.05 0.09 21200 18300
1.268
NUP211E.TVP 55 100 21 1.1 1.5 66.0 90.0 71.0 85.6 100.0 87.2 0.0862 4800 5700 0.665
2.1654 3.9370 0.8268 0.04 0.06 2.60 3.54 2.80 3.37 22500 19600
1.466
NU311E.TVP 55 120 29 2.0 2.0 70.5 106.5 100.3 3.0 149.0 142.0 0.0628 4700 5500 1.470
2.1654 4.7244 1.1417 0.08 0.08 2.78 4.19 3.95 0.12 33500 31900
3.241
NUP212E.TVP 60 110 22 1.5 1.5 72.0 100.0 77.7 95.1 109.0 98.6 0.0896 4500 5300 0.825
2.3622 4.3307 0.8661 0.06 0.06 2.83 3.94 3.06 3.74 24500 22200
1.819
NUP2212E.TVP 60 110 28 1.5 1.5 72.0 100.0 77.7 95.1 158.0 132.0 0.0984 3700 4300 1.080
2.3622 4.3307 1.1024 0.06 0.06 2.83 3.94 3.06 3.74 35500 29700
2.381
NUP2213E.TVP 65 120 31 1.5 1.5 78.5 108.5 84.6 103.2 188.0 153.0 0.0723 3500 4100 1.420
2.5591 4.7244 1.2205 0.06 0.06 3.09 4.27 3.33 4.06 42300 34400
3.131
Page 4-1a
rev3.2Feb99
H
J
H
d
J
d
E D
F
E D
F
Page 4-20
B
B
NUP
NUP
Page 4-1
Page 4-1
rev2.1Dec98
rev2.1Dec98
•
B338 TIMKEN PRODUCTS CATALOG
Radial Cylindrical
STANDARD STYLES
B
r
r
D
d
B
A
E
F
Standard Styles inch/metric
Standard Styles inch/metric
Standard Styles inch/metric
Standard Styles inch/metric
Standard Styles inch/metric
Bearing Number and Style Backing Dia. Load Ratings
d D B r (1) Static Dynamic Lubri- Reference Thermal Wt.
Bore O.D. Width Fillet Shaft Housing Load Load cation Speed Ratings
Radius E F Rating Ratings Factor
(max.) C0 C Cg Grease Oil
Caption:
RU RN RJ RF RT mm mm mm mm mm mm kN kN RPM RPM kg RIU RIN RIJ RIF RIT in. in. in. in. in. in. lbs. lbs. lbs.
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
A
100RU02 100RN02 100RJ02 100RF02 100RT02 100.000 180.000 34.000 2.0 114 165 245 216 0.088 2200 2600 3.8
3.9370 7.0866 1.3386 0.08 4.5 6.5 55000 49000 8.5
100RU33 100RN33 100RJ33 100RF33 100RT33 100.000 215.000 82.600 2.5 122 193 865 670 0.119 2200 2500 15.5
3.9370 8.4646 3.2500 0.10 4.8 7.6 196000 150000 34.2
40RIU130 40RIN130 40RIJ130 40RIF130 40RIT130 101.600 142.880 22.230 2.5 110 135 134 98 0.081 2100 2500 1.1
4.0000 5.6250 0.8750 0.10 4.3 5.3 30000 22000 2.4
40RIU133 40RIN133 40RIJ133 40RIF133 40RIT133 101.600 215.900 44.450 4.0 121 197 325 320 0.095 2200 2600 8.3
4.0000 8.5000 1.7500 0.16 4.8 7.8 73500 72000 18.3
105RU02 105RN02 105RJ02 105RF02 105RT02 105.000 190.000 36.000 2.0 121 175 250 224 0.090 2100 2600 4.6
4.1339 7.4803 1.4173 0.08 4.8 6.9 57000 50000 10.2
105RU32 105RN32 105RJ32 105RF32 105RT32 105.000 190.000 65.100 2.0 121 175 655 480 0.113 2300 2700 8.3
4.1339 7.4803 2.5625 0.08 4.8 6.9 146000 108000 18.3
105RU03 105RN03 105RJ03 105RF03 105RT03 105.000 225.000 49.000 2.5 127 203 450 400 0.104 2100 2400 10.1
4.1339 8.8583 1.9291 0.10 5.0 8.0 100000 90000 22.2
42RIU194 42RIN194 42RIJ194 42RIF194 42RIT194 107.950 222.250 69.850 4.0 127 203 720 570 0.115 2100 2400 13.6
4.2500 8.7500 2.7500 0.16 5.0 8.0 160000 129000 30.0
110RU02 110RN02 110RJ02 110RF02 110RT02 110.000 200.000 38.000 2.0 125 185 315 275 0.098 2000 2400 5.4
4.3307 7.8740 1.4961 0.08 4.9 7.3 71000 62000 11.8
110RU03 110RN03 110RJ03 110RF03 110RT03 110.000 240.000 50.000 2.5 135 215 750 550 0.106 1600 1900 11.7
4.3307 9.4488 1.9685 0.10 5.3 8.5 170000 122000 25.8
45RIU196 45RIN196 45RIJ196 45RIF196 45RIT196 114.300 203.200 33.340 3.0 130 187 245 224 0.090 1900 2300 4.8
4.5000 8.0000 1.3125 0.12 5.1 7.4 55000 50000 10.5
120RU30 120RN30 120RJ30 120RF30 120RT30 120.000 180.000 46.000 2.0 130 170 390 255 0.108 2200 2600 4.2
4.7244 7.0866 1.8110 0.08 5.1 6.7 88000 57000 9.3
120RU02 120RN02 120RJ02 120RF02 120RT02 120.000 215.000 40.000 2.0 137 198 320 285 0.098 1900 2300 6.5
4.7244 8.4646 1.5748 0.08 5.4 7.8 72000 64000 14.4
120RU92 120RN92 120RJ92 120RF92 120RT92 120.000 215.000 76.200 2.0 137 198 865 620 0.125 2000 2300 12.4
4.7244 8.4646 3.0000 0.08 5.4 7.8 196000 140000 27.3
120RU03 120RN03 120RJ03 120RF03 120RT03 120.000 260.000 55.000 2.5 145 235 540 490 0.114 1800 2100 15.2
4.7244 10.2362 2.1654 0.10 5.7 9.2 120000 112000 33.4
130RU30 130RN30 130RJ30 130RF30 130RT30 130.000 200.000 52.000 2.0 143 187 540 355 0.119 2000 2300 6.1
5.1181 7.8740 2.0472 0.08 5.6 7.4 122000 80000 13.5
130RU02 130RN02 130RJ02 130RF02 130RT02 130.000 230.000 40.000 2.5 148 212 355 305 0.105 1800 2100 7.4
5.1181 9.0551 1.5748 0.10 5.8 8.3 80000 69500 16.3
130RU92 130RN92 130RJ92 130RF92 130RT92 130.000 230.000 79.400 2.5 148 213 980 680 0.133 1800 2000 14.7
5.1181 9.0551 3.1250 0.10 5.8 8.4 224000 153000 32.4
130RU03 130RN03 130RJ03 130RF03 130RT03 130.000 280.000 58.000 3.0 158 252 600 550 0.100 1600 1900 18.5
5.1181 11.0236 2.2835 0.12 6.2 9.9 134000 125000 40.8
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
Continued on next page.
TIMKEN PRODUCTS CATALOG B339
•
ROLLER BEARINGS
Caption:
STANDARD STYLES - continued
B
r
r
A
B
D
d
E
F
Standard Styles inch/metric
Standard Styles inch/metric
Standard Styles inch/metric
Standard Styles inch/metric
Standard Styles inch/metric
Bearing Number and Style Backing Dia. Load Ratings
Lubri-
d D B r (1) Static Dynamic cation Reference Thermal Wt.
Bore O.D. Width Fillet Shaft Housing Load Load Factor Speed Ratings
Radius E F Rating Ratings
(max.) C0 C Cg Grease Oil
Caption:
RU RN RJ RF RT mm mm mm mm mm mm kN kN RPM RPM kg RIU RIN RIJ RIF RIT in. in. in. in. in. in. lbs. lbs. lbs.
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
A
140RU30 140RN30 140RJ30 140RF30 140RT30 140.000 210.000 53.000 2.0 152 198 540 355 0.120 1900 2200 6.6
5.5118 8.2677 2.0866 0.08 6.0 7.8 122000 80000 14.6
140RU51 140RN51 140RJ51 140RF51 140RT51 140.000 220.000 36.000 2.0 155 206 300 240 0.104 1700 2000 5.3
5.5118 8.6614 1.4173 0.08 6.1 8.1 68000 54000 11.6
140RU91 140RN91 140RJ91 140RF91 140RT91 140.000 220.000 63.500 2.0 154 206 800 520 0.132 1800 2000 9.3
5.5118 8.6614 2.5000 0.08 6.1 8.1 180000 116000 20.5
140RU02 140RN02 140RJ02 140RF02 140RT02 140.000 250.000 42.000 2.5 159 231 465 400 0.114 1600 1900 9.2
5.5118 9.8425 1.6535 0.10 6.2 9.1 104000 88000 20.2
140RU92 140RN92 140RJ92 140RF92 140RT92 140.000 250.000 82.600 2.5 159 231 1200 830 0.143 1600 1800 18.2
5.5118 9.8425 3.2500 0.10 6.2 9.1 270000 186000 40.0
140RU03 140RN03 140RJ03 140RF03 140RT03 140.000 300.000 62.000 3.0 168 271 670 610 0.106 1500 1800 22.8
5.5118 11.8110 2.4409 0.12 6.6 10.7 150000 137000 50.2
140RU93 140RN93 140RJ93 140RF93 140RT93 140.000 300.000 114.300 3.0 168 271 1760 1290 0.109 1400 1500 42.0
5.5118 11.8110 4.5000 0.12 6.6 10.7 400000 290000 92.5
150RU51 150RN51 150RJ51 150RF51 150RT51 150.000 235.000 38.000 2.0 165 220 400 310 0.114 1500 1900 6.3
5.9055 9.2520 1.4961 0.08 6.5 8.7 90000 69500 13.9
150RU91 150RN91 150RJ91 150RF91 150RT91 150.000 235.000 66.700 2.0 165 220 900 585 0.139 1600 1800 11.1
5.9055 9.2520 2.6250 0.08 6.5 8.7 204000 132000 24.5
150RU02 150RN02 150RJ02 150RF02 150RT02 150.000 270.000 45.000 2.5 171 248 520 440 0.099 1400 1700 11.7
5.9055 10.6299 1.7717 0.10 6.8 9.8 118000 100000 25.7
150RU92 150RN92 150RJ92 150RF92 150RT92 150.000 270.000 88.900 2.5 170 250 1400 950 0.126 1400 1600 23.1
5.9055 10.6299 3.5000 0.10 6.7 9.8 315000 216000 50.9
150RU03 150RN03 150RJ03 150RF03 150RT03 150.000 320.000 65.000 3.0 182 288 815 720 0.111 1300 1600 27.3
5.9055 12.5984 2.5591 0.12 7.2 11.3 183000 163000 60.1
150RU93 150RN93 150RJ93 150RF93 150RT93 150.000 320.000 123.900 3.0 182 288 2040 1460 0.137 1300 1400 51.8
5.9055 12.5984 4.8750 0.12 7.2 11.3 455000 325000 114.1
60RIU247 60RIN247 60RIJ247 60RIF247 60RIT247 152.400 203.200 25.400 2.5 161 194 270 173 0.110 1400 1700 2.2
6.0000 8.0000 1.0000 0.10 6.3 7.7 61000 39000 4.9
60RIU248 60RIN248 60RIJ248 60RIF248 60RIT248 152.400 266.700 39.690 4.0 173 246 450 380 0.097 1400 1700 9.7
6.0000 10.5000 1.5625 0.16 6.8 9.7 100000 86500 21.4
60RIU249 60RIN249 60RIJ249 60RIF249 60RIT249 152.400 266.700 61.910 4.0 174 245 865 640 0.114 1400 1700 15.2
6.0000 10.5000 2.4375 0.16 6.8 9.7 196000 146000 33.5
60RIU250 60RIN250 60RIJ250 60RIF250 60RIT250 152.400 304.800 57.150 5.0 182 275 735 640 0.109 1300 1600 20.7
6.0000 12.0000 2.2500 0.20 7.2 10.8 166000 143000 45.6
60RIU251 60RIN251 60RIJ251 60RIF251 60RIT251 152.400 304.800 88.900 5.0 181 276 1340 1020 0.125 1300 1500 32.3
6.0000 12.0000 3.5000 0.20 7.1 10.9 305000 228000 71.3
160RU30 160RN30 160RJ30 160RF30 160RT30 160.000 240.000 60.000 2.0 175 225 765 475 0.138 1600 1800 9.8
6.2992 9.4488 2.3622 0.08 6.9 8.9 170000 108000 21.7
160RU51 160RN51 160RJ51 160RF51 160RT51 160.000 250.000 40.000 2.0 173 237 455 345 0.100 1500 1700 7.5
6.2992 9.8425 1.5748 0.08 6.8 9.3 102000 78000 16.5
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
•
B340 TIMKEN PRODUCTS CATALOG
Radial Cylindrical
160RU91 160RN91 160RJ91 160RF91 160RT91 160.000 250.000 73.000 2.0 173 237 1060 670 0.124 1500 1700 13.7
6.2992 9.8425 2.8750 0.08 6.8 9.3 240000 150000 30.3
160RU02 160RN02 160RJ02 160RF02 160RT02 160.000 290.000 48.000 2.5 183 267 670 550 0.106 1300 1500 14.4
6.2992 11.4173 1.8898 0.10 7.2 10.5 150000 122000 31.8
160RU92 160RN92 160RJ92 160RF92 160RT92 160.000 290.000 98.000 2.5 183 267 1560 1060 0.134 1300 1500 29.8
6.2992 11.4173 3.8750 0.10 7.2 10.5 345000 236000 65.6
160RU03 160RN03 160RJ03 160RF03 160RT03 160.000 340.000 68.000 3.0 194 306 900 780 0.115 1200 1400 32.2
6.2992 13.3858 2.6772 0.12 7.6 12.1 204000 176000 71.0
160RU93 160RN93 160RJ93 160RF93 160RT93 160.000 340.000 133.000 3.0 194 306 2320 1660 0.147 1200 1300 62.8
6.2992 13.3858 5.2500 0.12 7.6 12.1 520000 375000 138.6
170RU30 170RN30 170RJ30 170RF30 170RT30 170.000 260.000 67.000 2.0 186 243 1020 640 0.125 1400 1600 13.2
6.6929 10.2362 2.6378 0.08 7.3 9.6 228000 143000 29.1
170RU51 170RN51 170RJ51 170RF51 170RT51 170.000 265.000 42.000 2.5 187 248 510 380 0.104 1400 1600 8.8
6.6929 10.4331 1.6535 0.10 7.4 9.8 114000 86500 19.4
170RU91 170RN91 170RJ91 170RF91 170RT91 170.000 265.000 76.200 2.5 187 248 1160 735 0.130 1400 1600 16.1
6.6929 10.4331 3.0000 0.10 7.4 9.8 260000 166000 35.5
170RU02 170RN02 170RJ02 170RF02 170RT02 170.000 310.000 52.000 3.0 195 285 695 585 0.112 1200 1500 18.2
6.6929 12.2047 2.0472 0.12 7.7 11.2 156000 132000 40.0
170RU92 170RN92 170RJ92 170RF92 170RT92 170.000 310.000 104.800 3.0 196 284 1930 1270 0.141 1200 1300 36.5
6.6929 12.2047 4.1250 0.12 7.7 11.2 430000 290000 80.6
170RU03 170RN03 170RJ03 170RF03 170RT03 170.000 360.000 72.000 3.0 205 325 1020 880 0.123 1200 1300 38.2
6.6929 14.1732 2.8346 0.12 8.1 12.8 228000 200000 84.1
170RU93 170RN93 170RJ93 170RF93 170RT93 170.000 360.000 139.700 3.0 205 325 2600 1830 0.153 1100 1200 73.6
6.6929 14.1732 5.5000 0.12 8.1 12.8 585000 415000 162.4
180RU51 180RN51 180RJ51 180RF51 180RT51 180.000 280.000 44.000 2.5 196 263 600 440 0.111 1200 1500 10.3
7.0866 11.0236 1.7323 0.10 7.7 10.3 134000 100000 22.7
180RU30 180RN30 180RJ30 180RF30 180RT30 180.000 280.000 74.000 2.0 197 264 1250 780 0.132 1200 1400 17.4
7.0866 11.0236 2.9134 0.08 7.8 10.4 280000 176000 38.4
180RU91 180RN91 180RJ91 180RF91 180RT91 180.000 280.000 82.600 2.5 197 262 1430 880 0.138 1200 1400 19.4
7.0866 11.0236 3.2500 0.10 7.8 10.3 325000 196000 42.9
180RU02 180RN02 180RJ02 180RF02 180RT02 180.000 320.000 52.000 3.0 205 295 710 585 0.114 1200 1400 18.9
7.0866 12.5984 2.0472 0.12 8.1 11.6 160000 129000 41.6
180RU92 180RN92 180RJ92 180RF92 180RT92 180.000 320.000 108.000 3.0 206 294 1930 1270 0.144 1100 1300 39.3
7.0866 12.5984 4.2500 0.12 8.1 11.6 440000 285000 86.6
180RU03 180RN03 180RJ03 180RF03 180RT03 180.000 380.000 75.000 3.0 216 344 1200 1020 0.127 1000 1200 44.0
7.0866 14.9606 2.9528 0.12 8.5 13.6 270000 232000 97.0
190RU30 190RN30 190RJ30 190RF30 190RT30 190.000 290.000 75.000 2.0 207 272 1270 780 0.138 1200 1400 18.4
7.4803 11.4173 2.9528 0.08 8.2 10.7 285000 176000 40.6
190RU51 190RN51 190RJ51 190RF51 190RT51 190.000 300.000 46.000 2.5 210 280 695 510 0.117 1100 1300 12.7
7.4803 11.8110 1.8110 0.10 8.2 11.0 156000 114000 28.0
190RU91 190RN91 190RJ91 190RF91 190RT91 190.000 300.000 85.700 2.5 210 281 1630 980 0.144 1100 1300 23.8
7.4803 11.8110 3.3750 0.10 8.2 11.1 365000 220000 52.5
190RU02 190RN02 190RJ02 190RF02 190RT02 190.000 340.000 55.000 3.0 216 314 930 735 0.124 1000 1200 22.7
7.4803 13.3858 2.1654 0.12 8.5 12.4 208000 166000 50.0
190RU92 190RN92 190RJ92 190RF92 190RT92 190.000 340.000 114.300 3.0 217 312 2240 1460 0.154 1000 1100 47.3
7.4803 13.3858 4.5000 0.12 8.6 12.3 500000 325000 104.2
190RU03 190RN03 190RJ03 190RF03 190RT03 190.000 400.000 78.000 4.0 233 357 1320 1060 0.136 980 1100 51.5
7.4803 15.7480 3.0709 0.16 9.2 14.1 290000 240000 113.5
200RU30 200RN30 200RJ30 200RF30 200RT30 200.000 310.000 82.000 2.0 220 290 1560 930 0.146 1100 1200 23.8
7.8740 12.2047 3.2283 0.08 8.7 11.4 355000 212000 52.5
200RU51 200RN51 200RJ51 200RF51 200RT51 200.000 320.000 48.000 2.5 221 299 735 550 0.120 1100 1300 15.5
7.8740 12.5984 1.8898 0.10 8.7 11.8 166000 122000 34.1
200RU91 200RN91 200RJ91 200RF91 200RT91 200.000 320.000 88.900 3.0 221 299 1630 1020 0.150 1100 1200 28.8
7.8740 12.5984 3.5000 0.12 8.7 11.8 365000 228000 63.4
200RU02 200RN02 200RJ02 200RF02 200RT02 200.000 360.000 58.000 3.0 230 330 930 735 0.127 1000 1200 27.3
7.8740 14.1732 2.2835 0.12 9.1 13.0 208000 163000 60.2
Continued on next page.
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
Standard Styles inch/metric Standard Styles inch/metric Standard Styles inch/metric Standard Styles inch/metric Standard Styles inch/metric
Bearing Number and Style Backing Dia. Load Ratings
Lubri-
d D B r (1) Static Dynamic cation Reference Thermal Wt.
Bore O.D. Width Fillet Shaft Housing Load Load Factor Speed Ratings
Radius E F Rating Ratings
(max.) C0 C Cg Grease Oil
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RU RN RJ RF RT mm mm mm mm mm mm kN kN RPM RPM kg RIU RIN RIJ RIF RIT in. in. in. in. in. in. lbs. lbs. lbs.
A
B
A
Caption:
TIMKEN PRODUCTS CATALOG B341
•
ROLLER BEARINGS
Caption:
STANDARD STYLES- continued
B
r
r
D
d
E
F
A
B
Standard Styles inch/metric
Standard Styles inch/metric
Standard Styles inch/metric
Standard Styles inch/metric
Standard Styles inch/metric
Bearing Number and Style Backing Dia. Load Ratings
Lubri-
d D B r (1) Static Dynamic cation Reference Thermal Wt.
Bore O.D. Width Fillet Shaft Housing Load Load Factor Speed Ratings
Radius E F Rating Ratings
(max.) C0 C Cg Grease Oil
A
RU RN RJ RF RT mm mm mm mm mm mm kN kN RPM RPM kg RIU RIN RIJ RIF RIT in. in. in. in. in. in. lbs. lbs. lbs.
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
Caption:
200RU92 200RN92 200RJ92 200RF92 200RT92 200.000 360.000 120.700 3.0 230 330 2600 1630 0.164 940 1000 56.8
7.8740 14.1732 4.7500 0.12 9.1 13.0 585000 365000 125.2
200RU03 200RN03 200RJ03 200RF03 200RT03 200.000 420.000 80.000 4.0 241 379 1290 1120 0.135 950 1100 57.6
7.8740 16.5354 3.1496 0.16 9.5 14.9 290000 250000 127.0
210RU51 210RN51 210RJ51 210RF51 210RT51 210.000 340.000 50.000 2.5 234 316 780 600 0.124 1000 1200 18.3
8.2677 13.3858 1.9685 0.10 9.2 12.4 176000 134000 40.3
210RU91 210RN91 210RJ91 210RF91 210RT91 210.000 340.000 95.300 2.5 233 318 1960 1220 0.156 980 1100 35.3
8.2677 13.3858 3.7500 0.10 9.2 12.5 440000 275000 77.7
210RU02 210RN02 210RJ02 210RF02 210RT02 210.000 380.000 62.000 3.0 242 348 1060 850 0.132 940 1100 32.4
8.2677 14.9606 2.4409 0.12 9.5 13.7 236000 190000 71.5
210RU92 210RN92 210RJ92 210RF92 210RT92 210.000 380.000 127.000 3.0 240 350 2700 1760 0.165 900 1000 66.1
8.2677 14.9606 5.0000 0.12 9.4 13.8 600000 400000 145.8
210RU03 210RN03 210RJ03 210RF03 210RT03 210.000 440.000 84.000 4.0 252 398 1430 1220 0.142 890 1000 66.3
8.2677 17.3228 3.3071 0.16 9.9 15.7 325000 275000 146.2
220RU30 220RN30 220RJ30 220RF30 220RT30 220.000 340.000 90.000 2.5 241 318 1960 1160 0.159 930 1000 31.2
8.6614 13.3858 3.5433 0.10 9.5 12.5 440000 260000 68.9
220RU51 220RN51 220RJ51 220RF51 220RT51 220.000 350.000 51.000 2.5 244 326 865 630 0.128 950 1100 19.6
8.6614 13.7796 2.0079 0.10 9.6 12.8 193000 143000 43.2
220RU91 220RN91 220RJ91 220RF91 220RT91 220.000 350.000 98.400 2.5 241 329 2080 1290 0.160 930 1000 37.6
8.6614 13.7796 3.8750 0.10 9.5 12.9 475000 290000 82.9
220RU02 220RN02 220RJ02 220RF02 220RT02 220.000 400.000 65.000 3.0 256 365 1180 915 0.138 880 1000 38.3
8.6614 15.7480 2.5591 0.12 10.1 14.4 260000 208000 84.4
220RU92 220RN92 220RJ92 220RF92 220RT92 220.000 400.000 133.400 3.0 252 368 3250 2000 0.178 800 880 78.4
8.6614 15.7480 5.2500 0.12 9.9 14.5 735000 455000 172.9
220RU03 220RN03 220RJ03 220RF03 220RT03 220.000 460.000 88.000 4.0 261 419 1600 1340 0.149 840 970 75.9
8.6614 18.1102 3.4646 0.16 10.3 16.5 360000 305000 167.2
90RIU395 90RIN395 90RIJ395 90RIF395 90RIT395 228.600 304.800 38.100 4.0 241 292 585 355 0.124 990 1200 7.8
9.0000 12.0000 1.5000 0.16 9.5 11.5 132000 80000 17.3
90RIU396 90RIN396 90RIJ396 90RIF396 90RIT396 228.600 368.300 50.800 5.0 255 342 930 680 0.133 880 1000 21.9
9.0000 14.5000 2.0000 0.20 10.0 13.5 208000 153000 48.4
90RIU399 90RIN399 90RIJ399 90RIF399 90RIT399 228.600 431.800 117.480 5.0 265 395 2600 1860 0.168 810 900 82.7
9.0000 17.0000 4.6250 0.20 10.4 15.6 600000 415000 182.4
230RU51 230RN51 230RJ51 230RF51 230RT51 230.000 370.000 53.000 3.0 256 344 1000 720 0.134 880 1000 23.1
9.0551 14.5669 2.0866 0.12 10.1 13.6 224000 163000 50.8
230RU91 230RN91 230RJ91 230RF91 230RT91 230.000 370.000 101.600 3.0 256 344 2450 1460 0.167 830 920 44.3
9.0551 14.5669 4.0000 0.12 10.1 13.6 550000 325000 97.7
230RU02 230RN02 230RJ02 230RF02 230RT02 230.000 420.000 69.000 3.0 263 387 1370 1080 0.144 820 950 44.5
9.0551 16.5354 2.7165 0.12 10.4 15.2 305000 240000 98.1
230RU92 230RN92 230RJ92 230RF92 230RT92 230.000 420.000 139.000 3.0 263 387 3400 2200 0.178 770 840 90.4
9.0551 16.5354 5.5000 0.12 10.4 15.2 765000 490000 199.2
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
•
B342 TIMKEN PRODUCTS CATALOG
Radial Cylindrical
230RU03 230RN03 230RJ03 230RF03 230RT03 230.000 480.000 91.000 4.0 279 431 1700 1400 0.151 800 920 85.6
9.0551 18.8976 3.5827 0.16 11.0 17.0 380000 315000 188.8
240RU30 240RN30 240RJ30 240RF30 240RT30 240.000 360.000 92.000 2.5 262 338 2200 1220 0.169 840 930 34.4
9.4488 14.1732 3.6220 0.10 10.3 13.3 490000 275000 75.8
240RU51 240RN51 240RJ51 240RF51 240RT51 240.000 390.000 55.000 3.0 265 365 1060 765 0.140 830 970 27.2
9.4488 15.3543 2.1654 0.12 10.4 14.4 236000 173000 59.8
240RU91 240RN91 240RJ91 240RF91 240RT91 240.000 390.000 108.000 3.0 265 365 2700 1600 0.176 790 870 53.4
9.4488 15.3543 4.2500 0.12 10.4 14.4 600000 355000 117.7
240RU02 240RN02 240RJ02 240RF02 240RT02 240.000 440.000 72.000 3.0 277 402 1400 1100 0.146 800 920 51.6
9.4488 17.3228 2.8346 0.12 10.9 15.8 315000 250000 113.7
240RU92 240RN92 240RJ92 240RF92 240RT92 240.000 440.000 146.000 3.0 277 402 3750 2400 0.185 720 790 104.3
9.4488 17.3228 5.7500 0.12 10.9 15.8 850000 540000 230.0
240RU03 240RN03 240RJ03 240RF03 240RT03 240.000 500.000 95.000 4.0 289 451 2000 1600 0.159 730 840 97.5
9.4488 19.6850 3.7402 0.16 11.4 17.8 450000 360000 215.0
95RIU430 95RIN430 95RIJ430 95RIF430 95RIT430 241.300 323.850 41.270 4.0 255 310 695 425 0.133 920 1100 9.8
9.5000 12.7500 1.6250 0.16 10.0 12.2 156000 95000 21.5
250RU51 250RN51 250RJ51 250RF51 250RT51 250.000 410.000 57.000 3.0 278 383 1140 850 0.144 790 920 31.3
9.8425 16.1417 2.2441 0.12 10.9 15.1 255000 190000 69.0
250RU91 250RN91 250RJ91 250RF91 250RT91 250.000 410.000 111.100 3.0 278 383 2750 1700 0.177 760 840 60.9
9.8425 16.1417 4.3750 0.12 10.9 15.1 610000 380000 134.3
250RU02 250RN02 250RJ02 250RF02 250RT02 250.000 460.000 76.000 4.0 291 418 1600 1220 0.154 750 860 59.8
9.8425 18.1102 2.9921 0.16 11.5 16.5 360000 275000 131.8
250RU92 250RN92 250RJ92 250RF92 250RT92 250.000 460.000 152.400 4.0 291 418 4050 2550 0.192 680 740 119.7
9.8425 18.1102 6.0000 0.16 11.5 16.5 915000 570000 263.9
250RU03 250RN03 250RJ03 250RF03 250RT03 250.000 520.000 98.000 5.0 300 470 2120 1660 0.165 700 800 109.0
9.8425 20.4724 3.8583 0.20 11.8 18.5 475000 375000 240.3
100RIU433 100RIN433 100RIJ433 100RIF433 100RIT433 254.000 336.550 41.270 4.0 269 322 735 430 0.136 870 1000 10.2
10.0000 13.2500 1.6250 0.16 10.6 12.7 163000 96500 22.4
260RU30 260RN30 260RJ30 260RF30 260RT30 260.000 400.000 104.000 3.0 285 375 2600 1530 0.180 760 840 49.8
10.2362 15.7480 4.0945 0.12 11.2 14.8 600000 345000 109.8
260RU51 260RN51 260RJ51 260RF51 260RT51 260.000 430.000 59.000 3.0 291 399 1200 900 0.147 750 880 36.1
10.2362 16.9291 2.3228 0.12 11.4 15.7 270000 204000 79.6
260RU91 260RN91 260RJ91 260RF91 260RT91 260.000 430.000 114.300 3.0 291 399 3100 1900 0.182 700 770 70.0
10.2362 16.9291 4.5000 0.12 11.4 15.7 695000 425000 154.3
260RU02 260RN02 260RJ02 260RF02 260RT02 260.000 480.000 80.000 4.0 300 440 1760 1370 0.160 710 820 68.2
10.2362 18.8976 3.1496 0.16 11.8 17.3 400000 305000 150.4
260RU92 260RN92 260RJ92 260RF92 260RT92 260.000 480.000 158.800 4.0 300 440 4400 2800 0.200 640 700 136.3
10.2362 18.8976 6.2500 0.16 11.8 17.3 1000000 630000 300.4
260RU03 260RN03 260RJ03 260RF03 260RT03 260.000 540.000 102.000 5.0 314 486 2320 1860 0.171 660 760 122.0
10.2362 21.2598 4.0157 0.20 12.4 19.1 520000 415000 268.9
110RIU473 110RIN473 110RIJ473 110RIF473 110RIT473 279.400 368.300 44.450 4.0 295 352 930 530 0.150 760 890 13.0
11.0000 14.5000 1.7500 0.16 11.6 13.9 208000 118000 28.7
280RU30 280RN30 280RJ30 280RF30 280RT30 280.000 420.000 106.000 3.0 303 397 3050 1700 0.192 670 740 53.9
11.0236 16.5354 4.1732 0.12 11.9 15.6 680000 380000 118.8
280RU51 280RN51 280RJ51 280RF51 280RT51 280.000 460.000 63.000 3.0 311 429 1430 1000 0.156 680 790 44.5
11.0236 18.1102 2.4803 0.12 12.2 16.9 325000 228000 98.1
280RU91 280RN91 280RJ91 280RF91 280RT91 280.000 460.000 123.800 3.0 311 429 3750 2120 0.201 620 680 87.4
11.0236 18.1102 4.8750 0.12 12.2 16.9 830000 475000 192.8
280RU02 280RN02 280RJ02 280RF02 280RT02 280.000 500.000 80.000 4.0 319 461 2000 1500 0.169 640 730 72.1
11.0236 19.6850 3.1496 0.16 12.6 18.2 450000 335000 159.0
280RU92 280RN92 280RJ92 280RF92 280RT92 280.000 500.000 165.100 4.0 319 461 5200 3150 0.213 570 610 148.7
11.0236 19.6850 6.5000 0.16 12.6 18.2 1180000 710000 327.9
280RU03 280RN03 280RJ03 280RF03 280RT03 280.000 580.000 108.000 5.0 341 519 2750 2160 0.182 590 670 148.6
11.0236 22.8346 4.2520 0.20 13.4 20.4 620000 480000 327.6
300RU30 300RN30 300RJ30 300RF30 300RT30 300.000 460.000 118.000 3.0 330 429 3750 2040 0.205 590 640 75.3
11.8110 18.1102 4.6457 0.12 13.0 16.9 830000 455000 166.0
Continued on next page.
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
Standard Styles inch/metric Standard Styles inch/metric Standard Styles inch/metric Standard Styles inch/metric Standard Styles inch/metric
Bearing Number and Style Backing Dia. Load Ratings
Lubri-
d D B r (1) Static Dynamic cation Reference Thermal Wt.
Bore O.D. Width Fillet Shaft Housing Load Load Factor Speed Ratings
Radius E F Rating Ratings
(max.) C0 C Cg Grease Oil
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RU RN RJ RF RT mm mm mm mm mm mm kN kN RPM RPM kg RIU RIN RIJ RIF RIT in. in. in. in. in. in. lbs. lbs. lbs.
A
B
A
Caption:
TIMKEN PRODUCTS CATALOG B343
•
ROLLER BEARINGS
Caption:
STANDARD STYLES- continued
B
r
r
D
d
E
F
A
B
Standard Styles inch/metric
Standard Styles inch/metric
Standard Styles inch/metric
Standard Styles inch/metric
Standard Styles inch/metric
Bearing Number and Style Backing Dia. Load Ratings
Lubri-
d D B r (1) Static Dynamic cation Reference Thermal Wt.
Bore O.D. Width Fillet Shaft Housing Load Load Factor Speed Ratings
Radius E F Rating Ratings
(max.) C0 C Cg Grease Oil
A
RU RN RJ RF RT mm mm mm mm mm mm kN kN RPM RPM kg RIU RIN RIJ RIF RIT in. in. in. in. in. in. lbs. lbs. lbs.
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
Caption:
300RU51 300RN51 300RJ51 300RF51 300RT51 300.000 480.000 67.000 3.0 329 452 1660 1160 0.166 630 730 49.1
11.8110 18.8976 2.6378 0.12 12.9 17.8 375000 260000 108.2
300RU91 300RN91 300RJ91 300RF91 300RT91 300.000 480.000 127.000 3.0 329 452 4000 2320 0.204 580 630 93.0
11.8110 18.8976 5.0000 0.12 12.9 17.8 900000 520000 205.1
300RU02 300RN02 300RJ02 300RF02 300RT02 300.000 540.000 85.000 4.0 343 497 2280 1660 0.178 580 660 90.5
11.8110 21.2598 3.3465 0.16 13.5 19.6 510000 375000 199.6
300RU92 300RN92 300RJ92 300RF92 300RT92 300.000 540.000 177.800 4.0 343 497 6200 3750 0.226 500 540 188.5
11.8110 21.2598 7.0000 0.16 13.5 19.6 1400000 830000 415.6
125RIU550 125RIN550 125RIJ550 125RIF550 125RIT550 317.500 419.100 50.800 5.0 337 400 1290 710 0.167 640 740 19.4
12.5000 16.5000 2.0000 0.20 13.2 15.8 290000 160000 42.8
125RIU551 125RIN551 125RIJ551 125RIF551 125RIT551 317.500 482.600 66.670 5.0 337 451 1800 1180 0.174 590 680 46.0
12.5000 19.0000 2.6250 0.20 13.8 17.8 405000 260000 101.3
320RU30 320RN30 320RJ30 320RF30 320RT30 320.000 480.000 121.000 3.0 347 453 4050 2120 0.215 550 600 81.3
12.5984 18.8976 4.7638 0.12 13.7 17.8 900000 480000 179.1
320RU51 320RN51 320RJ51 320RF51 320RT51 320.000 500.000 71.000 3.0 352 468 1900 1270 0.176 590 670 54.7
12.5984 19.6850 2.7953 0.12 13.9 18.4 425000 285000 120.7
320RU91 320RN91 320RJ91 320RF91 320RT91 320.000 500.000 130.200 3.0 352 468 4300 2450 0.214 540 590 100.3
12.5984 19.6850 5.1250 0.12 13.9 18.4 980000 550000 221.2
320RU02 320RN02 320RJ02 320RF02 320RT02 320.000 580.000 92.000 4.0 368 532 2450 1800 0.186 550 630 114.9
12.5984 22.8346 3.6220 0.16 14.5 20.9 550000 405000 253.4
320RU92 320RN92 320RJ92 320RF92 320RT92 320.000 580.000 190.500 4.0 370 530 6700 4000 0.238 470 510 236.4
12.5984 22.8346 7.5000 0.16 14.6 20.9 1530000 900000 521.1
340RU30 340RN30 340RJ30 340RF30 340RT30 340.000 520.000 133.000 4.0 372 488 4650 2550 0.224 500 550 107.6
13.3858 20.4724 5.2362 0.16 14.7 19.2 1040000 570000 237.2
135RIU580 135RIN580 135RIJ580 135RIF580 135RIT580 342.900 457.200 57.150 5.0 365 435 1530 815 0.181 580 680 27.2
13.5000 18.0000 2.2500 0.20 14.4 17.1 345000 183000 60.0
135RIU582 135RIN582 135RIJ582 135RIF582 135RIT582 342.900 527.100 104.770 5.0 376 494 3450 2040 0.208 520 580 88.0
13.5000 20.7500 4.1250 0.20 14.8 19.4 765000 455000 193.9
360RU30 360RN30 360RJ30 360RF30 360RT30 360.000 540.000 134.000 4.0 392 508 4900 2600 0.232 470 520 113.6
14.1732 21.2598 5.2765 0.16 15.4 20.0 1100000 585000 250.4
145RIU610 145RIN610 145RIJ610 145RIF610 145RIT610 368.300 495.300 63.500 5.0 391 473 2040 1100 0.194 510 590 35.8
14.5000 19.5000 2.5000 0.20 15.4 18.6 455000 245000 79.0
380RU30 380RN30 380RJ30 380RF30 380RT30 380.000 560.000 135.000 4.0 412 528 5200 2750 0.241 440 480 119.5
14.9606 22.0472 5.3150 0.16 16.2 20.8 1180000 610000 263.4
150RIU613 150RIN613 150RIJ613 150RIF613 150RIT613 381.000 508.000 63.500 5.0 404 485 2040 1100 0.196 500 570 36.9
15.0000 20.0000 2.5000 0.20 15.9 19.1 455000 245000 81.3
155RIU640 155RIN640 155RIJ640 155RIF640 155RIT640 393.700 520.700 63.500 5.0 416 498 2040 1080 0.200 480 560 38.0
15.5000 20.5000 2.5000 0.20 16.4 19.6 455000 245000 83.8
400RU30 400RN30 400RJ30 400RF30 400RT30 400.000 600.000 148.000 4.0 438 562 6000 3100 0.252 410 440 155.7
15.7480 23.6220 5.8268 0.16 17.2 22.1 1340000 695000 343.2
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
•
B344 TIMKEN PRODUCTS CATALOG
Radial Cylindrical
Standard Styles inch/metric
Standard Styles inch/metric
Standard Styles inch/metric
Standard Styles inch/metric
Standard Styles inch/metric
Bearing Number and Style Backing Dia. Load Ratings
Lubri-
d D B r (1) Static Dynamic cation Reference Thermal Wt.
Bore O.D. Width Fillet Shaft Housing Load Load Factor Speed Ratings
Radius E F Rating Ratings
(max.) C0 C Cg Grease Oil
RU RN RJ RF RT mm mm mm mm mm mm kN kN RPM RPM kg RIU RIN RIJ RIF RIT in. in. in. in. in. in. lbs. lbs. lbs.
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
RIU/RU RIN/RN RIJ/RJ RIF/RF RIT/RT RIP/RP
160RIU643 160RIN643 160RIJ643 160RIF643 160RIT643 406.400 546.100 69.850 5.0 432 521 2500 1320 0.212 450 510 48.2
16.0000 21.5000 2.7500 0.20 17.0 20.5 560000 300000 106.2
160RIU644 160RIN644 160RIJ644 160RIF644 160RIT644 406.400 603.250 82.550 5.0 444 565 2800 1700 0.211 440 500 86.4
16.0000 23.7500 3.2500 0.20 17.5 22.2 630000 380000 190.4
160RIU645 160RIN645 160RIJ645 160RIF645 160RIT645 406.400 603.250 123.820 5.0 442 568 5000 2600 0.243 410 450 129.4
16.0000 23.7500 4.8750 0.20 17.4 22.3 1120000 600000 285.4
165RIU662 165RIN662 165RIJ662 165RIF662 165RIT662 419.100 622.300 127.000 5.0 456 585 5400 2900 0.247 390 420 141.0
16.5000 24.5000 5.0000 0.20 18.0 23.0 1200000 655000 310.9
170RIU663 170RIN663 170RIJ663 170RIF663 170RIT663 431.800 584.200 76.200 6.0 460 556 3000 1560 0.223 410 460 61.4
17.0000 23.0000 3.0000 0.24 18.1 21.9 670000 355000 135.4
170RIU664 170RIN664 170RIJ664 170RIF664 170RIT664 431.800 635.000 88.900 6.0 470 597 3450 2040 0.226 400 450 101.2
17.0000 25.0000 3.5000 0.24 18.5 23.5 780000 455000 223.2
440RU30 440RN30 440RJ30 440RF30 440RT30 440.000 650.000 157.000 5.0 476 613 7350 3650 0.274 350 370 189.4
17.3228 25.5906 6.1811 0.20 18.8 24.1 1660000 830000 417.5
180RIU683 180RIN683 180RIJ683 180RIF683 180RIT683 457.200 685.800 88.900 6.0 500 643 3450 2160 0.229 370 420 122.5
18.0000 27.0000 3.5000 0.24 19.7 25.3 780000 480000 270.1
180RIU684 180RIN684 180RIJ684 180RIF684 180RIT684 457.200 685.800 139.700 6.0 500 643 6300 3400 0.265 350 380 192.2
18.0000 27.0000 5.5000 0.24 19.7 25.3 1430000 765000 423.8
460RU30 460RN30 460RJ30 460RF30 460RT30 460.000 680.000 163.000 5.0 498 641 8000 4000 0.283 330 350 215.6
18.1102 26.7717 6.4173 0.20 19.6 25.2 1800000 900000 475.2
185RIU696 185RIN696 185RIJ696 185RIF696 185RIT696 469.900 698.500 88.900 6.0 513 656 6550 3550 0.266 260 280 125.5
18.5000 27.5000 5.5000 0.24 20.2 25.8 1500000 800000 434.6
480RU30 480RN30 480RJ30 480RF30 480RT30 480.000 700.000 165.000 5.0 518 660 8150 4000 0.294 320 340 225.6
18.8976 27.5591 6.4961 0.20 20.4 26.0 1830000 900000 497.4
500RU30 500RN30 500RJ30 500RF30 500RT30 500.000 720.000 167.000 5.0 540 680 8300 4150 0.296 310 330 235.3
19.6850 28.3465 6.5748 0.20 21.2 26.8 1900000 930000 518.7
530RU30 530RN30 530RJ30 530RF30 530RT30 530.000 780.000 185.000 5.0 578 730 10600 5100 0.320 260 280 321.7
20.8661 30.7087 7.2835 0.20 22.8 28.8 2360000 1140000 709.2
210RIU728 210RIN728 210RIJ728 210RIF728 210RIT728 533.400 787.400 161.920 6.0 579 742 8500 4300 0.302 280 300 288.5
21.0000 31.0000 6.3750 0.24 22.8 29.2 1900000 965000 636.0
220RIU744 220RIN744 220RIJ744 220RIF744 220RIT744 558.800 711.200 111.120 5.0 587 683 5700 2450 0.292 300 330 112.2
22.0000 28.0000 4.3750 0.20 23.1 26.9 1290000 550000 247.3
560RU30 560RN30 560RJ30 560RF30 560RT30 560.000 820.000 195.000 5.0 607 773 11400 5500 0.324 250 270 369.7
22.0472 32.2835 7.6772 0.20 23.9 30.4 2550000 1250000 815.0
600RU30 600RN30 600RJ30 600RF30 600RT30 600.000 870.000 200.000 5.0 650 820 12500 6000 0.341 230 240 420.3
23.6220 34.2520 7.8740 0.20 25.6 32.3 2800000 1340000 926.7
260RIU802 260RIN802 260RIJ802 260RIF802 260RIT802 660.400 958.850 127.000 6.0 716 903 7200 4000 230 260 326.6
26.0000 37.7500 5.0000 0.24 28.2 35.6 1630000 900000 720.1
275RIU808 275RIN808 275RIJ808 275RIF808 275RIT808 698.500 1016.000 133.350 6.0 757 957 8300 4550 0.325 210 230 385.7
27.5000 40.0000 5.2500 0.24 29.8 37.7 1860000 1040000 850.3
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
B
A
A
Caption:
TIMKEN PRODUCTS CATALOG B345
•
5200, A5200 Metric Series
Caption:
ROLLER BEARINGS
5200, A5200 METRIC SERIES
B
r
• Ring tolerances are found on page B348.
• Life and load calculations are found in the engineering section of this catalog.
• Shaft and housing ?ts, tolerances and shaft diameters are found on pages B347 and B348.
IN THE BEARING NUMBER
W = double ribbed outer ring.
S = stamped steel land-riding cage. M = machined brass land-riding cage.
Outer Ring & Inner* Complete Roller Assembly Ring Bearing
30 °
D
A
B
d
E
F
52XX-WS A-52XX A-52XX-WS
R
*Inner ring can be ordered seperately
* Inner ring can be ordered separately
Max. Fillet Radius Backing Diameter Load Ratings Weight
Bearing d D B R r Static Dynamic Lubrication Reference Thermal Number Bore O.D. Width Shaft Housing Shaft Housing Load Load Factor Speed Rating
E F Rating Ratings
C0 C Cg Grease Oil
mm mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. in. lbs. lbs. lbs.
Caption:
A
A-5220-WS 100 180 60.325 4.0 2.0 118 167 489 387 0.112 2600 3100 7.2
3.9370 7.0866 2.3750 0.16 0.08 4.6 6.6 110000 87000 15.9
A-5222-WS 110 200 69.850 4.0 2.0 130 186 645 498 0.124 2300 2700 10.4
4.3307 7.8740 2.7500 0.16 0.08 5.1 7.3 145000 112000 22.9
A-5224-WS 120 215 76.200 4.8 2.0 144 197 774 574 0.134 2100 2400 13.0
4.7244 8.4646 3.0000 0.19 0.08 5.7 7.8 174000 129000 28.6
A-5226-WS 130 230 79.375 4.8 2.5 148 213 867 645 0.140 1900 2200 15.2
5.1181 9.0551 3.1250 0.19 0.10 5.8 8.4 195000 145000 33.6
A-5228-WS 140 250 82.550 4.8 2.5 165 232 992 730 0.148 1700 1900 18.9
5.5118 9.8425 3.2500 0.19 0.10 6.5 9.1 223000 164000 41.7
A-5230-WS 150 270 88.900 6.4 2.5 179 252 1190 872 0.132 1500 1700 23.9
5.9055 10.6299 3.5000 0.25 0.10 7.0 9.9 268000 196000 52.8
A-5232-WS 160 290 98.425 6.4 2.5 190 268 1410 1020 0.141 1400 1600 30.8
6.2992 11.4173 3.8750 0.25 0.10 7.5 10.6 318000 229000 67.8
A-5234-WS 170 310 104.775 6.4 3.0 202 286 1610 1130 0.148 1300 1400 37.6
6.6929 12.2047 4.1250 0.25 0.12 7.9 11.2 361000 255000 82.9
A-5236-WS 180 320 107.950 6.4 3.0 211 298 1740 1220 0.153 1200 1300 40.4
7.0866 12.5984 4.2500 0.25 0.12 8.3 11.7 392000 274000 89.0
A-5238-WS 190 340 114.300 7.9 3.0 224 313 1940 1350 0.160 1100 1200 48.5
7.4803 13.3858 4.5000 0.31 0.12 8.8 12.3 437000 304000 107.0
A-5240-WS 200 360 120.650 7.9 3.0 235 325 1810 1230 0.165 1100 1300 57.6
7.8740 14.1732 4.7500 0.31 0.12 9.2 12.8 406000 277000 127.0
A-5244-WM 220 400 133.350 9.5 3.0 260 367 2740 1850 0.182 880 980 76.4
8.6614 15.7480 5.2500 0.38 0.12 10.2 14.4 615000 416000 175.0
A-5248-WM 240 440 146.050 9.5 3.0 285 402 3270 2210 0.195 780 860 106.1
9.4488 17.3228 5.7500 0.38 0.12 11.2 15.8 736000 497000 234.0
•
B346 TIMKEN PRODUCTS CATALOG
Radial Cylindrical
5200, A5200 METRIC SERIES SHAFT AND HOUSING FITS AND TOLERANCES
SHAFT FITS(1)
All tolerances shown in ten thousandth (.0001”) and micrometers (µm).
Bearing O.D.
Bore
Press ?t
Slip Fit
Tolerance Rotating Inner Ring
Stationary Inner Ring
Shaft Diameter Fit
Shaft Diameter Fit
B
A
Over Incl. +0 min. max.
min. max.
mm mm mm mm mm mm mm mm mm mm mm
in. in.
in.
in. in. in. in. in. in. in. in.
80 120 -20
+25 +48 25T 69T -23 0 23L 20T
3.1496 4.7236 -8
+10 +19 10T 27T -9 0
9L 8T
120 140 -25
+30 +56 30T 81T -25 0 25L 25T
4.7236 5.5108 -10
+12 +22 12T 32T -10 0 10L 10T
140 180 -25
+46 +71 46T 97T -25 10 25L 25T
5.5108 7.0856 -10
+18 +28 18T 38T -10 0 10L 10T
180 240 -30
+51 +81 51T 112T -30 0 30L 30T
7.0856 9.4476 -12
+20 +32 20T 44T -12 0 12L 12T
(1) When shaft is used as race surface, hardness to be Rc58 minimum and surface ?nish to be 15 RMS.
A
Caption:
HOUSING FITS
All tolerances shown in ten thousandth (.0001”) and micrometers (µm).
Bearing O.D.
O.D.
Press ?t
Slip Fit
Tolerance Rotating Inner Ring
Stationary Inner Ring
Inner Ring
Housing Diameter Fit Housing Diameter Fit
Over Incl. +0 min. max.
min. max.
mm mm mm mm mm mm mm mm mm mm mm
in. in.
in.
in. in. in. in. in. in. in. in.
– 180 -25
-15 +22 15T 46L -56 -25 56T 0L
– 7.0866 -10
-6 +8 6T 18L -22 -10 22T 0L
180 200 -30
-18 +18 18T 48L -66 -30 66T 0L
7.0866 7.8740 -12
-7 +7 7T 19L -26 -12 26T 0L
200 230 -30
-18 +23 18T 53L -66 -30 66T 0L
7.874 9.0551 -12
-7 +9 7T 21L -26 -12 26T 0L
230 250 -30
-18 +28 18T 58L -66 -30 66T 0L
9.0551 9.8425 -12
-7 +11 7T 23L -12 -12 26T 0L
250 270 -36
-18 +28 18T 64L -71 -30 71T 5L
9.8425 10.6299 -14
-7 +11 7T 25L -28 -12 28T 2L
270 310 -36
-18 +33 18T 69L -71 -36 71T 5L
10.6299 12.2047 -14
-7 +13 7T 27L -28 -14 28T 2L
310 400 -41
-18 +38 18T 79L -76 -36 79T 5L
12.2047 15.7480 -16
-7 +15 7T 31L -30 -14 30T 2L
400 440 -46
-23 +41 23T 86L -86 -36 86T 10L
15.748 17.3228 -18
-9 +16 9T 34L -14 -34 34T 4L
TIMKEN PRODUCTS CATALOG B347
•
Caption:
ROLLER BEARINGS
5200, A5200 METRIC SERIES SHAFT AND HOUSING FITS AND TOLERANCES - continued
RADIAL INTERNAL CLEARANCE (R6)
Bearing Bore Radial Internal Clearance
Over Incl. min. max.
mm mm mm mm in. in. in. in.
– 100 0.127 0.183
– 3.937 0.005 0.0072
100 120 0.127 0.188
3.937 4.7244 0.005 0.0074
120 140 0.142 0.208
4.7244 5.5118 0.0056 0.0082
140 170 0.152 0.224
5.5118 6.6929 0.006 0.0088
170 180 0.152 0.229
6.6929 7.0866 0.006 0.009
180 220 0.173 0.254
7.0866 8.6614 0.0068 0.01
220 240 0.183 0.269
8.6614 9.4488 0.0072 0.0106
INNER RING TOLERANCES
All tolerances shown in ten thousandth (.0001”) and micrometers (µm).
Bearing Bore Bore & Width Inner O.D.
Over Incl. +0 +0
mm mm mm mm in. in. in. in.
80 120 -20 -203
3.1496 4.7244 -8 -80
120 180 -25 -254
4.7244 7.0866 -10 -100
180 250 -30 -305
7.0866 9.8425 -12 -120
OUTER RING TOLERANCES
All tolerances shown in ten thousandth (.0001”) and micrometers (µm).
Bearing O.D. O.D. Diameter
Under Rollers
Over Incl. +0 -0
mm mm mm mm in. in. in. in.
150 180 -25 +36
5.9055 7.0866 -10 +14
180 250 -30 +41
7.0866 9.8425 -12 +16
250 315 -36 +46
9.8425 12.4016 -14 +18
315 400 -41 +51
12.4016 15.748 -16 +20
400 500 -46 +56
15.748 19.685 -18 +22
SHAFT DIMENSIONS - 5200 BEARINGS WITHOUT INNER RING
Bearing Slip Fit Housing*
Press Fit Housing* Number max. min. max. min.
mm mm mm mm in. in. in. in.
5220 WS 121.064 121.044 121.036 121.016
4.7663 4.7655 4.7652 4.7644
5222 WS 133.007 132.987 132.969 132.949
5.2365 5.2357 5.235 5.2343
5224 WS 145.194 145.174 145.156 145.136
5.7163 5.7155 5.7148 5.714
5226 WS 155.042 155.016 155.004 154.978
6.104 6.103 6.1025 6.1015
5228 WS 168.529 168.504 168.491 168.466
6.635 6.634 6.6335 6.6325
5230 WS 181.623 181.597 181.587 181.559
7.1505 7.1495 7.149 7.148
5232 WS 193.713 193.688 193.675 193.65
7.6265 7.6255 7.625 7.624
5234 WS 205.562 205.537 205.524 205.499
8.093 8.092 8.0915 8.0905
5236 WS 216.37 216.344 216.319 216.294
8.5185 8.5175 8.5165 8.5155
5238 WS 229.032 229.001 228.994 228.963
9.017 9.0158 9.0155 9.0143
5240 WS 242.296 242.265 242.245 242.214
9.5392 9.538 9.5372 9.536
5244 WM 266.02 265.971 265.951 265.92
10.4725 10.4713 10.4705 10.4693
5248WM 291.292 291.262 291.241 291.211
11.4682 11.467 11.4662 11.465
*All shaft diameters are based on a housing bore to housing O.D. ratio of 0.7.
A
B
Caption:
A
•
B348 TIMKEN PRODUCTS CATALOG
Radial Cylindrical
NCF/NU
• Single-row, full-complement cylindrical roller bearings.
• Features include integral ?anges on the inner and outer rings.
• Can manage axial loads in one direction and permit small axial displacements.
NCF
NCF1840V 200 250 24 1.5 207 243 343 193 0.112 610 740 2.5
7.8740 9.8425 0.9449 0.06 8.1 9.6 77200 43300
5.5
NCF1844V 220 270 24 1.5 227 263 377 202 0.119 550 670 2.9
8.6614 10.6299 0.9449 0.06 8.9 10.4 84800 45400
6.4
NCF2944V 220 300 48 2.1 230 290 1010 575 0.144 560 660 10.9
8.6614 11.8110 1.8898 0.08 9.1 11.4 226000 129000
24.0
NCF1852V 260 320 28 2.0 269 311 561 297 0.138 480 580 4.8
10.2362 12.5984 1.1024 0.08 10.6 12.3 126000 66700
10.6
NCF1864V 320 400 38 2.1 330 390 912 479 0.164 380 460 10.6
12.5984 15.7480 1.4961 0.08 13.0 15.3 205000 108000
23.4
NCF2964V 320 440 72 2.5 332 428 2380 1300 0.197 340 400 32.9
12.5984 17.3228 2.8346 0.10 13.1 16.8 536000 293000
72.5
NCF1876V 380 480 46 2.1 390 470 1360 708 0.190 310 370 19.1
14.9606 18.8976 1.8110 0.08 15.4 18.5 307000 159000
42.1
NCF2976V 380 520 82 3.0 395 505 3380 1800 0.226 270 310 52.9
14.9606 20.4724 3.2283 0.12 15.5 19.9 759000 405000
116.6
NCF1880V 400 500 46 2.1 410 490 1420 722 0.195 290 350 20.6
15.7480 19.6850 1.8110 0.08 16.1 19.3 319000 162000
45.4
NCF1888V 440 540 46 2.1 450 530 1560 756 0.208 260 310 22.3
17.3228 21.2598 1.8110 0.08 17.7 20.9 351000 170000
49.2
NCF1892V 460 580 56 2.5 472 568 2020 1030 0.220 250 290 34.2
18.1102 22.8346 2.2047 0.10 18.6 22.3 455000 232000
75.4
NCF18/530V 530 650 56 2.5 542 638 2320 1100 0.242 210 240 37.8
20.8661 25.5906 2.2047 0.10 21.4 25.1 521000 248000
83.3
NCF18/600V 600 730 60 2.5 612 718 2610 1170 0.264 180 210 50.2
23.6220 28.7402 2.3622 0.10 24.1 28.3 587000 263000
110.7
NCF18/630V 630 780 69 3.0 645 765 3080 1410 0.276 170 200 72.2
24.8031 30.7087 2.7165 0.12 25.4 30.1 692000 316000
159.2
NCF18/710V 710 870 74 3.0 725 855 3900 1740 0.304 150 170 91.6
27.9528 34.2520 2.9134 0.12 28.5 33.7 876000 390000
201.9
NU
NU1036MA 180 280 46 2.1 190 270 505 391 0.111 2100 2600 10.7
7.0866 11.0236 1.8110 0.08 7.5 10.6 113000 88000
23.6
NU1040MA 200 310 51 2.1 210 300 602 445 0.120 1900 2300 14.6
7.8740 12.2047 2.0079 0.08 8.3 11.8 135000 100000
32.2
NU1052MA 260 400 65 3.0 275 385 1030 737 0.148 1400 1700 30.0
10.2362 15.7480 2.5591 0.12 10.8 15.2 232000 166000
66.1
NU1056MA 280 420 65 3.0 295 405 1080 754 0.154 1300 1600 31.9
11.0236 16.5354 2.5591 0.12 11.6 16.0 243000 169000
70.3
NU1060MA 300 460 74 3.0 315 445 1420 1000 0.167 1200 1400 45.7
11.8110 18.1102 2.9134 0.12 12.4 17.5 319000 225000
100.8
NU1064MA 320 480 74 3.0 335 465 1490 1020 0.173 1100 1300 48.1
12.5984 18.8976 2.9134 0.12 13.2 18.3 335000 230000
106.0
NU1068MA 340 520 82 4.0 358 502 1800 1240 0.184 1000 1200 64.2
13.3858 20.4724 3.2283 0.16 14.1 19.8 404000 279000
141.5
NU1080MA 400 600 90 4.0 418 582 2340 1560 0.206 830 970 91.9
15.7480 23.6220 3.5433 0.16 16.5 22.9 525000 350000
202.6
NU10/600 600 870 118 5.0 651 807 5030 3080 0.283 490 560 239.6
23.6220 34.2520 4.6457 0.20 25.6 31.8 1130000 692000
528.2
TIMKEN PRODUCTS CATALOG B349
Caption:
Backing Diameter Load Ratings
Static Dynamic Lubrication Reference Thermal Weight Number Bore O.D. Width Fillet Rad. Shaft Housing Load Load Factor Speed Ratings
(max.) E F Rating Ratings
C0 C Cg Grease Oil
Bearing
d D B r
A
B
A
mm mm mm
mm mm mm kN kN RPM RPM kg in. in. in.
in. in. in. lbs. lbs. lbs.
Caption:
•
Caption:
ROLLER BEARINGS
NOTES
A
B
Caption:
A
•
B350 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearings
SPHERICAL ROLLER BEARINGS
Overview: Timken spherical roller bearings feature all of the characteristics that have made Timken renowned – superior design, reliable performance and comprehensive technical support. Spherical roller bearings are designed to manage high radial loads and perform consistently, even when misalignment, marginal lubrication, contamination, extreme speeds and critical application stresses are present.
• Sizes: Bore sizes of 25 mm and larger.
• Markets: Pulp and paper, power generation, oil ?eld, mining and aggregate processing, wind turbines, gear drives and rolling mills.
• Features: Large bores for integration into heavy-duty industrial applications.
• Bene?ts: High load capacity under misalignment conditions from shaft de?ections or housing misalignment.
A
B
Caption:
FPO
Caption:
Caption:
A
Caption:
Caption:
TIMKEN PRODUCTS CATALOG B351
•
Caption:
A
B
Spherical Roller Bearings
Bore:
(5 x _ _ = bore in millimeters when 2 digits)
5 x 07 = 35 mm 5 x 76 = 380 mm (/ # # # = bore in
millimeters when >2 digits)
/530 = 530 mm /1060 = 1060 mm
Series:
222 17 K CJ W33
C3
Caption:
Caption:
A
223 26 YM W33 W800
C4
Modi?cation and style codes:
K = tapered bore
CJ = 2 piece steel cage - window type
VJ = 2 piece steel cage - ?nger type
YM = 1 piece brass cage - ?nger type
YMB = 1 piece brass, ?nger type, land piloted YMD = 2 piece brass, ?nger type, land piloted
W33 = 3 holes and groove in O.D.
W800 = shaker screen modi?cation:
- tighter bore diameter and O.D. tolerances - brass cage - RIC in upper 2?3 of clearance speci?ed W47 = inner ring with oversize bore
Internal Clearance: C2 less than C0
C0 normal
C3 greater than C0 C4 greater than C3 C5 greater than C4 C6 special clearance
Current Industry Standard:
22326
2
23
26
double-row series SRB
Bore
5 x 26 = Bore in millimeters 130 mm
Old ABMA
Part Number:
130SD23
130
SD
23
Bore
130 = Bore in millimeters 130 mm
•
B352 TIMKEN PRODUCTS CATALOG
A
B
Spherical
Roller Bearings
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B354
Bearing Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B354
Modi?cation Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B355
Spherical Roller Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . B356
Shaft Adapter Accessories for Tapered Bore Bearings . . . . B374
Shaft Adapter Accessories for Cylindrical Bore Bearings . . B378
Mounting Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B379
Page
Caption:
A
TIMKEN PRODUCTS CATALOG B353
•
ROLLER BEARINGS
Caption:
INTRODUCTION
A
B
The Timken self-aligning spherical roller bearing is a combination radial and thrust bearing, designed to operate even if shaft and housing are, or become, misaligned under load. This high-capacity bearing is the favored choice when conditions include heavy loads, plus dif?culties in establishing or maintaining housing alignment, or when shaft de?ection can be expected.
Shaft de?ections and housing distortions caused by shock or heavy loads, which lead to misalignment, are compensated for by the internal self-alignment of the bearing elements during operation. Edge loading of rollers, a condition that limits service life on other types of bearings, does not develop in spherical roller bearings. Optimum bearing capacity can often be realized with up to ±1 1?2 degrees of misalignment, depending on the size and series of bearing selected.
The inherent compensation for misalignment provided by the spherical roller bearing offers the designer the opportunity to use weldments for housing frames instead of complex castings, eliminating high-cost machining operations. Even when castings may be preferred, bore alignment is less critical if spherical roller bearings are speci?ed. Unit design and construction also make the spherical roller bearing convenient to handle during installation or maintenance.
Several types of radial spherical roller bearings include CJ, YM, YMB, YMD, and VCSJ types.
Bearings are made to RBEC-1 tolerances. Life calculations, shaft and housing ?ts, internal clearances, tolerances and other technical data for these bearings are found in the engineering section of this catalog.
BEARING TYPES
Caption:
Caption:
Caption:
A
YM
YMD
• Incorporates advanced features and offers higher load ratings for longer life.
• Precision-machined, land-riding and two-pieced brass cages.
• Suited for use in severe conditions.
CJ
• High load ratings for longer life.
• Incorporates stamped steel window type cage for a broad range of applications.
• Utilize advanced features.
VCSJ
• Compact design for general use.
• Stamped steel ?nger type cage.
Caption:
CJ
Tapered Bore with
Adapter Sleeve
YM
• Higher load ratings for longer life.
• Incorporates advanced features and precision-machined roller-riding one piece brass cage.
• Suited for severe conditions of use.
YMB
• Higher load ratings for longer life.
• Incorporates advanced features and precision-machined, land-riding one piece brass cage.
• Suited for use in severe conditions.
TAPERED BORE BEARINGS WITH ADAPTER SLEEVES
SHAKER SCREEN EQUIPMENT
• SNW adapter assemblies consist of a sleeve and locknut. Lockwashers are available for shaft mounting of tapered bore
“K” bearings.
• Description of shaft mounting techniques for tapered bore bearings with adapter sleeves are found on page B380.
• Vibrating equipment commonly found in the aggregate industry is one of the most demanding applications for spherical roller bearings.
• Timken manufactures spherical roller bearings suited for high rotational speeds, high radial and impact loads, ?uctuating and unbalanced loads, misalignment and extreme centrifugal forces in tough environmental conditions.
• The design allows for static and dynamic misalignment in the application while maintaining the bearing’s full dynamic capacity. This achieves maximum expected service life.
• Standards and special modi?cation codes are available for shaft (s4 or m6) and housing (P6 or H7) ?ts as in the engineering section.
•
B354 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearings
T52BE Inner ring with P5 running accuracy, W4 (SKF does not include W4)
C3, T52BE Inner ring with P5 running accuracy, C3 RIC
C4, T52BE Inner ring with P5 running accuracy, C4 RIC
T52BN Outer ring with P5 running accuracy, W4 (SKF does not include W4)
C3, T52BN Outer ring with P5 running accuracy, C3 RIC
C4, T52BN Outer ring with P5 running accuracy, C4 RIC
T52BW C02 P5 running accuracy (CO2 and CO4)
C3, T52BW P5 running accuracy (CO2 and CO4), C3 RIC
C4, T52BW PS running accuracy (CO2 and CO4), C4 RIC
––– Special RIC non-speci?c
Tapered bore (1: 12 on diameter 22, 23, 30, 31, 32, 33, 39 series)
K30 Tapered bore (1: 30 on diameter 40,41,42 series)
J26A Mark high and low points of eccentricity on face of rings
––– Engineered coating on rollers to combat low lube or abrasive contamination
––– Rings and rollers TDC® coated
Outer ring with standard lubrication holes
700855 Special reduced O.D. tolerance on outer rings
––– Outer ring with counter drilled lubrication hole
TIMKEN SPHERICAL ROLLER BEARING MODIFICATIONS
Other modi?cations available, contact your local Timken representative for more information.
CJ CJ, CC
J
YM M2
YMB MC
CO2 CO2
TKN SKF
FAG TIMKEN GENERAL DEFINITION
Spherical with stamped steel cage
M
MB One-piece inner ring piloted machined brass cage
One-piece roller riding machined brass cage
A
B
A
CO2 C3 CO23
CO2 C4 CO24
CO4 CO4
CO4 C3 CO43
CO4 C4 CO44
CO8 C08
CO8 C3 CO83
CO8 C4 CO84
C6 C6
K
K
K
K
K30
W4 W4
W6R –––
W8 –––
W20 W20
W22 W22
SY
Caption:
W25 W73
W31 W31
W33 W33
W33 W4 W503
S + J26A Timken and FAG drop W33 W4 in conjunction with CO8, W507 W33 W22 W31 W512 (W22 + W31 + W33) S + 700855 Timken and FAG drop W31 in conjunction with CO2, CO4, and CO8 W33 W94 W513 (W26 + W33) S + H40A See other component description
W37
Special ?nish
W40I ECB (Pre?x)
W209B Inner ring only made of carburizing grade steel
W40R –––
W45A W61
W84 W77
W88 –––
W93 –––
W94 W26
––– Bearing inspected to certain quality control requirements
S
Standard lubrication holes and groove in outer ring (FAG drops S from number for sizes larger than 315 mm O.D.)
––– Rollers only made of carburizing grade steel
––– Tapped lifting holes in face of outer ring to facilitate lifting and handling
H44S (H40)* Outer ring with standard lubrication holes plugged
––– Special reduced bore tolerance on inner ring
––– Inner ring with keyway in bore
H40A Inner ring lubrication holes and retainer face grooves SKF and FAG - no retainer face grooves
W502 W502 (W22 + W33) S + 700855 W22, W33 and W45A (where feasible) W507 W507 (W4 + W31 + W33) S +
W31, W33 and W45A (where feasible)
W509 W509 (W26 + W31 + W33) S.H40A + … W31, W33, W94 and W45A (where feasible) W525 W525 (W31 + W77) S.H44S (H40)* W31, W33, W84 and W45A (where feasible) W534 W534 (CO8 + W507) ––– W507 and CO8
W800 VA405
T41A W22 + W88 + radial internal clearance in upper two-thirds of range speci?ed range (shaker screen modi?cation)
W906A –––
––– CO2 + CO4 + W31 + W33 + W401 + W40R (offered on tapered bore product, supercedes W507A, W534A)
Data in this chart has been compiled to make the information as complete as possible, Timken cannot assume any responsibility for errors,
omissions or accuracy of the published data.
TIMKEN PRODUCTS CATALOG B355
•
Caption:
ROLLER BEARINGS
SPHERICAL ROLLER BEARINGS - continued
• Timken inventory systems are designed to provide fast delivery for frequently-ordered sizes and styles.
• Consult your Timken representative for up-to-date information about the availability of the bearings you have selected.
• Life calculations, shaft and housing ?ts, internal clearances, tolerances and other technical data for these bearings are found in the engineering section of this catalog.
• Bearings are available with a tapered bore for adapter type mounting. To order, add the suf?x “K” to bearing number (e.g., 23120K).
Caption:
Caption: CJ
Caption:
A
B
of
Backing Diameter Load Ratings Equivalent Radial load Factors(1) Lubrication Reference Thermal
Bearing d D B R da Da Static Dynamic Dynamic Static Life Speed Ratings(3) Weight
Number Bore O.D. Width Fillet(2) Shaft Housing Load Rating Load Rating Adjustment
(max.) C0 C Factor(4)
Cg Grease Oil e
T
< – e
T
R
X = .67
> e
R
X = 1
In All Cases X0 = 1
Y Y Y0
mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. lbs. lbs. lbs.
22205CJ 25 52 18.0 1.0 30 47 43.0 44.0 0.34 2.00 2.98 1.96 0.0384 7700 9600 0.2
0.9843 2.0472 0.7087 0.04 1.2 1.9 9700 9800
0.4
21305VCSJ 25 62 17.0 1.0 33 54 38.0 41.0 0.29 2.33 3.47 2.28 0.0403 7000 8700 0.30
0.9843 2.4409 0.6693 0.04 1.3 2.1 8400 9200
0.6
22206CJ 30 62 20.0 1.0 38 56 61.0 58.0 0.31 2.15 3.20 2.10 0.0435 6600 8100 0.3
1.1811 2.4409 0.7874 0.04 1.5 2.2 13700 13100
0.6
21306VCSJ 30 72 19.0 1.0 39 63 51.0 53.0 0.28 2.45 3.64 2.39 0.0444 6200 7600 0.40
1.1811 2.8346 0.7480 0.04 1.5 2.5 11300 12000
0.8
22207CJ 35 72 23.0 1.0 45 65 88.0 78.0 0.31 2.21 3.29 2.16 0.0484 5900 7200 0.5
1.3780 2.8346 0.9055 0.04 1.8 2.6 19700 17500
1.0
21307VCSJ 35 80 21.0 1.5 44 71 66.0 67.0 0.27 2.48 3.69 2.42 0.0484 5600 6900 0.50
1.3779 3.1496 0.8268 0.06 1.7 2.8 14800 15000
1.1
22208CJ 40 80 23.0 1.0 50 72 100 90.0 0.27 2.47 3.67 2.41 0.0494 5100 6300 0.6
1.5748 3.1496 0.9055 0.04 2.0 2.9 22400 20100
1.2
22208YM 40 80 23.0 1.0 50 72 93.5 85.5 0.27 2.47 3.67 2.41 0.0514 5200 6400 0.6
1.5748 3.1496 0.9055 0.04 2.0 2.9 21000 19200
1.2
21308VCSJ 40 90 23.0 1.5 51 81 85.0 81.0 0.26 2.55 3.80 2.50 0.0529 5100 6200 0.70
1.5748 3.5433 0.9055 0.06 2.0 3.2 19100 18200
1.5
22308CJ 40 90 33.0 1.5 53 81 148 133 0.36 1.87 2.79 1.83 0.0541 4900 5800 1.1
1.5748 3.5433 1.2992 0.06 2.1 3.2 33100 29800
2.3
22308YM 40 90 33.0 1.5 53 81 148 133 0.36 1.87 2.79 1.83 0.0541 4900 5800 1.1
1.5748 3.5433 1.2992 0.06 2.1 3.2 33100 29800
2.3
22209CJ 45 85 23.0 1.0 55 77 108 94.0 0.26 2.64 3.93 2.58 0.0547 4700 5700 0.6
1.7717 3.3465 0.9055 0.04 2.2 3.0 24200 21100
1.3
22209YM 45 85 23.0 1.0 55 77 101 90.0 0.26 2.64 3.93 2.58 0.0547 4700 5800 0.6
1.7717 3.3465 0.9055 0.04 2.2 3.0 22800 20100
1.3
21309VCSJ 45 100 25.0 1.5 57 91 106 100 0.26 2.64 3.93 2.58 0.0567 4600 5700 0.90
1.7717 3.9370 0.9843 0.06 2.2 3.6 23900 22500
2
22309CJ 45 100 36.0 1.5 58 90 182 162 0.36 1.90 2.83 1.86 0.0565 4500 5300 1.4
1.7717 3.9370 1.4173 0.06 2.3 3.5 40800 36400
3.1
22309YM 45 100 36.0 1.5 58 90 182 162 0.36 1.90 2.83 1.86 0.0579 4500 5300 1.4
1.7717 3.9370 1.4173 0.06 2.3 3.5 40800 36400
3.1
22210CJ 50 90 23.0 1.0 59 82 118 101 0.24 2.84 4.23 2.78 0.0575 4300 5200 0.6
1.9685 3.5433 0.9055 0.04 2.3 3.2 26000 22600
1.4
22210YM 50 90 23.0 1.0 59 82 112 96.5 0.24 2.84 4.23 2.78 0.0575 4300 5300 0.6
1.9685 3.5433 0.9055 0.04 2.3 3.2 25100 21700
1.4
22310CJ 50 110 40.0 2.0 64 98 226 197 0.36 1.87 2.79 1.83 0.0422 4200 4900 1.9
1.9685 4.3307 1.5748 0.08 2.5 3.9 51000 44200
4.2
22310YM 50 110 40.0 2.0 64 98 226 197 0.36 1.87 2.79 1.83 0.0422 4200 4900 1.9
1.9685 4.3307 1.5748 0.08 2.5 3.9 51000 44200
4.2
22211CJ 55 100 25.0 1.5 66 91 142 120 0.23 2.95 4.40 2.89 0.0604 4000 4800 0.9
2.1654 3.9370 0.9843 0.06 2.6 3.6 32000 27000
1.9
Caption:
A
(1) These factors apply for both inch and metric calculations. See engineering section for instructions on use.
(2) Maximum shaft or housing ?llet radius that bearing corners will clear.
* Available in standard shaker screen bearing design con?guration
(example: 223xxYMW33W800C4).
(3) See thermal speed ratings in the engineering section.
(4) Geometry constant for Lubrication Life Adjustment Factor a3l. See "Bearing Load Ratings and Life Calculations."
•
B356 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearings
VCSJ
Backing Diameter Load Ratings Equivalent Radial load Factors(1) Lubrication Reference Thermal
Bearing d D B R da Da Static Dynamic Dynamic Static Life Speed Ratings(3) Weight
Number Bore O.D. Width Fillet(2) Shaft Housing Load Rating Load Rating Adjustment
(max.) C0 C Factor(4)
Cg Grease Oil
Caption:
Caption:
Caption:
YM
Caption:
A
B
A
T R
X = 1
< – e
> e In All
Cases X0 = 1
T
R
X = .67
e
mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. lbs. lbs. lbs.
22311CJ 55 120 43.0 2.0 69 107 248 221 0.36 1.87 2.79 1.83 0.0446 3900 4700 2.4
2.1654 4.7244 1.6929 0.08 2.7 4.2 55800 49600
5.3
22311YM 55 120 43.0 2.0 69 107 248 221 0.36 1.87 2.79 1.83 0.0446 3900 4700 2.4
2.1654 4.7244 1.6929 0.08 2.7 4.2 55800 49600
5.3
21311VCSJ 55 120 29.0 2.0 70 109 158 141 0.24 2.82 4.20 2.76 0.0446 4000 4800 1.50
2.1654 4.7244 1.1417 0.08 2.8 4.3 35500 31700
3.3
22212CJ 60 110 28.0 1.5 72 100 174 146 0.24 2.84 4.23 2.78 0.0652 3800 4600 1.2
2.3622 4.3307 1.1024 0.06 2.8 4.0 39100 32800
2.6
22212YM 60 110 28.0 1.5 72 100 164 140 0.24 2.84 4.23 2.78 0.0645 3800 4700 1.2
2.3622 4.3307 1.1024 0.06 2.8 4.0 36900 31400
2.6
22312CJ 60 130 46.0 2.0 75 117 312 269 0.35 1.95 2.90 1.91 0.0463 3600 4300 3.0
2.3622 5.1181 1.8110 0.08 3.0 4.6 70100 60400
6.6
22312YM 60 130 46.0 2.0 75 117 312 269 0.35 1.95 2.90 1.91 0.0471 3600 4300 3.0
2.3622 5.1181 1.8110 0.08 3.0 4.6 70100 60400
6.6
21312VCSJ 60 130 31.0 2.0 76 118 179 158 0.24 2.81 4.19 2.75 0.0467 3700 4600 1.90
2.3622 5.1181 1.2205 0.08 3.0 4.7 40200 35500
4.2
22213CJ 65 120 31.0 1.5 78 109 217 177 0.24 2.79 4.15 2.73 0.0473 3600 4400 1.6
2.5591 4.7244 1.2205 0.06 3.1 4.3 49000 39800
3.4
22213YM 65 120 31.0 1.5 78 109 204 170 0.24 2.79 4.15 2.73 0.0468 3600 4400 1.6
2.5591 4.7244 1.2205 0.06 3.1 4.3 46000 38200
3.4
21313VCSJ 65 140 33.0 2.0 82 128 215 189 0.23 2.91 4.33 2.84 0.0463 3500 4300 2.40
2.5591 5.5118 1.2992 0.08 3.2 5.0 48300 42500
5.3
22313CJ 65 140 48.0 2.0 82 126 333 290 0.33 2.06 3.06 2.01 0.0455 3400 4100 3.6
2.5591 5.5118 1.8898 0.08 3.2 5.0 74900 65200
8.0
22313YM 65 140 48.0 2.0 82 126 333 290 0.33 2.06 3.06 2.01 0.0464 3400 4100 3.6
2.5591 5.5118 1.8898 0.08 3.2 5.0 74900 65200
8.0
22214CJ 70 125 31.0 1.5 84 115 231 184 0.22 3.01 4.48 2.94 0.0464 3400 4100 1.6
2.7559 4.9213 1.2205 0.06 3.3 4.5 52000 41400
3.6
22314CJ 70 150 51.0 2.0 87 131 385 331 0.34 2.00 2.98 1.96 0.0482 3200 3800 4.4
2.7559 5.9055 2.0079 0.08 3.4 5.2 86500 74300
9.7
21314VCSJ 70 150 35.0 2.0 88 138 240 208 0.23 2.90 4.31 2.83 0.0480 3300 4100 2.90
2.7559 5.9055 1.3780 0.08 3.5 5.4 54000 46700
6.4
22314YM 70 150 51.0 2.0 87 131 385 331 0.34 2.00 2.98 1.96 0.0482 3200 3800 4.4
2.7559 5.9055 2.0079 0.08 3.4 5.2 86500 74300
9.7
22215CJ 75 130 31.0 1.5 88 120 241 191 0.22 3.14 4.67 3.07 0.0477 3200 3900 1.7
2.9528 5.1181 1.2205 0.06 3.5 4.7 54100 42900
3.8
22315CJ 75 160 55.0 2.0 93 140 456 387 0.34 2.00 2.98 1.96 0.0505 3100 3600 5.4
2.9528 6.2992 2.1654 0.08 3.7 5.5 102000 87100
11.9
21315VCSJ 75 160 37.0 2.0 94 148 274 237 0.23 2.94 4.37 2.87 0.0502 3200 3800 3.50
2.9528 6.2992 1.4567 0.08 3.7 5.8 61600 53200
7.7
22315YM 75 160 55.0 2.0 93 140 456 387 0.34 2.00 2.98 1.96 0.0505 3100 3600 5.4
2.9528 6.2992 2.1654 0.08 3.7 5.5 102000 87100
11.9
Y Y Y0
Caption:
Continued on next page.
TIMKEN PRODUCTS CATALOG B357
•
ROLLER BEARINGS
Caption:
Caption:
SPHERICAL ROLLER BEARINGS - continued
• Timken inventory systems are designed to provide fast delivery for frequently-ordered sizes and styles.
• Consult your Timken representative for up-to-date information about the availability of the bearings you have selected.
• Life calculations, shaft and housing ?ts, internal clearances, tolerances and other technical data for these bearings are found in the engineering section of this catalog.
• Bearings are available with a tapered bore for adapter type mounting. To order, add the suf?x “K” to bearing number (e.g., 23120K).
Caption: CJ
Caption:
A
B
Backing Diameter Load Ratings Equivalent Radial load Factors(1) Lubrication Reference Thermal
Bearing d D B R da Da Static Dynamic Dynamic Static Life Speed Ratings(3) Weight
Number Bore O.D. Width Fillet(2) Shaft Housing Load Rating Load Rating Adjustment
(max.) C0 C Factor(4)
Cg Grease Oil e
T
< – e
In All Cases X0 = 1
T
R
X = .67
> e
R
X = 1
Y Y Y0
mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. lbs. lbs. lbs.
22216CJ 80 140 33.0 2.0 95 129 278 218 0.22 3.14 4.67 3.07 0.0499 3000 3700 2.2
3.1496 5.5118 1.2992 0.08 3.7 5.1 62500 49100
4.7
22216YM 80 140 33.0 2.0 95 129 263 210 0.22 3.14 4.67 3.07 0.0495 3000 3700 2.2
3.1496 5.5118 1.2992 0.08 3.7 5.1 59200 47100
4.7
21316VCSJ 80 170 39.0 2.0 100 158 305 260 0.23 2.95 4.40 2.89 0.0522 3000 3700 4.10
3.1496 6.6929 1.5354 0.08 3.9 6.2 68500 58400
9
22316CJ 80 170 58.0 2.0 97 148 510 427 0.34 2.00 2.98 1.96 0.0526 2900 3500 6.4
3.1496 6.6929 2.2835 0.08 3.8 5.8 115000 96100
14.2
22316YM 80 170 58.0 2.0 97 148 510 427 0.34 2.00 2.98 1.96 0.0526 2900 3500 6.4
3.1496 6.6929 2.2835 0.08 3.8 5.8 115000 96100
14.2
22217CJ 85 150 36.0 2.0 101 139 320 255 0.22 3.07 4.57 3.00 0.0518 2900 3500 2.7
3.3465 5.9055 1.4173 0.08 4.0 5.5 72000 57200
6.0
22217YM 85 150 36.0 2.0 101 139 302 244 0.22 3.07 4.57 3.00 0.0513 2900 3600 2.7
3.3465 5.9055 1.4173 0.08 4.0 5.5 67900 54800
6.0
21317VCSM 85 180 41.0 3.0 107 166 365 301 0.23 2.99 4.46 2.93 0.0547 2900 3500 5.20
3.3465 7.0866 1.6142 0.12 4.2 6.5 82000 67800
11.5
22317CJ 85 180 60.0 2.5 106 158 591 474 0.32 2.09 3.11 2.04 0.0554 2700 3200 7.5
3.3465 7.0866 2.3622 0.10 4.2 6.2 133000 107000
16.4
22317YM 85 180 60.0 2.5 106 158 591 474 0.32 2.09 3.11 2.04 0.0554 2700 3200 7.5
3.3465 7.0866 2.3622 0.10 4.2 6.2 133000 107000
16.4
22218CJ 90 160 40.0 2.0 105 146 388 303 0.23 2.90 4.31 2.83 0.0536 2800 3400 3.5
3.5433 6.2992 1.5748 0.08 4.2 5.8 87200 68100
7.6
22218YM 90 160 40.0 2.0 105 146 388 303 0.23 2.90 4.31 2.83 0.0536 2800 3400 3.5
3.5433 6.2992 1.5748 0.08 4.2 5.8 87200 68100
7.6
23218CJ 90 160 52.0 2.0 104 146 504 369 0.30 2.25 3.34 2.20 0.0536 2300 2700 4.5
3.5433 6.2992 2.0630 0.08 4.1 5.8 113000 83000
10.0
23218YM 90 160 52.0 2.0 104 146 504 369 0.30 2.25 3.34 2.20 0.0536 2300 2700 4.5
3.5433 6.2992 2.0630 0.08 4.1 5.8 113000 83000
10.0
22318CJ 90 190 64.0 2.5 110 167 642 529 0.35 1.92 2.86 1.88 0.0565 2600 3000 8.8
3.5433 7.4803 2.5197 0.10 4.3 6.6 144000 119000
19.4
22318YM 90 190 64.0 2.5 110 167 642 529 0.33 2.06 3.06 2.01 0.0565 2600 3000 8.8
3.5433 7.4803 2.5197 0.10 4.3 6.6 144000 119000
19.4
21318VCSM 90 190 43.0 3.0 113 176 398 327 0.23 3.00 4.47 2.93 0.0567 2800 3300 6.00
3.5433 7.4803 1.6929 0.12 4.5 6.9 89500 73400
13.5
22319CJ 90 190 64.0 2.5 110 167 642 529 0.33 2.06 3.06 2.01 0.0593 2600 3000 8.8
3.5433 7.4803 2.5197 0.10 4.3 6.6 144000 119000
19.4
23318YM 90 190 73.0 2.5 110 167 664 516 0.40 1.70 2.52 1.66 0.0555 1900 2200 10.1
3.5433 7.4803 2.8740 0.10 4.3 6.6 149000 116000
22.2
22219CJ 95 170 43.0 2.0 112 152 383 289 0.25 2.68 3.99 2.62 0.0556 2800 3400 4.2
3.7402 6.6929 1.6929 0.08 4.4 6.0 86200 65000
9.3
22219YM 95 170 43.0 2.0 112 152 383 289 0.25 2.68 3.99 2.62 0.0558 2800 3400 4.2
3.7402 6.6929 1.6929 0.08 4.4 6.0 86200 65000
9.3
Caption:
A
(1) These factors apply for both inch and metric calculations. See engineering section for instructions on use.
(2) Maximum shaft or housing ?llet radius that bearing corners will clear.
* Available in standard shaker screen bearing design con?guration
(example: 223xxYMW33W800C4).
(3) See thermal speed ratings in the engineering section.
(4) Geometry constant for Lubrication Life Adjustment Factor a3l. See "Bearing Load Ratings and Life Calculations."
•
B358 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearings
VCSJ
Backing Diameter Load Ratings Equivalent Radial load Factors(1) Lubrication Reference Thermal
Bearing d D B R da Da Static Dynamic Dynamic Static Life Speed Ratings(3) Weight
Number Bore O.D. Width Fillet(2) Shaft Housing Load Rating Load Rating Adjustment
(max.) C0 C Factor(4)
Cg Grease Oil
Caption:
Caption:
YM
Caption:
Caption:
A
B
A
T R
X = 1
< – e
> e In All
Cases X0 = 1
T
R
X = .67
e
mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. lbs. lbs. lbs.
22319YM 95 200 67.0 2.5 119 175 735 580 0.32 2.09 3.11 2.04 0.0593 2400 2800 10.2
3.7402 7.8740 2.6378 0.10 4.7 6.9 165000 130000
22.5
23120YM 100 165 52.0 2.0 112 151 575 379 0.28 2.39 3.56 2.34 0.0567 2400 2800 4.4
3.9370 6.4961 2.0472 0.08 4.5 6.0 129000 85200
9.7
22220CJ 100 180 46.0 2.0 119 160 484 373 0.24 2.84 4.23 2.78 0.0577 2700 3200 5.1
3.9370 7.0866 1.8110 0.08 4.7 6.3 109000 83800
11.2
22220YM 100 180 46.0 2.0 119 160 484 373 0.24 2.84 4.23 2.78 0.0577 2700 3200 5.1
3.9370 7.0866 1.8110 0.08 4.7 6.3 109000 83800
11.2
23220CJ 100 180 60.3 2.0 118 165 646 463 0.31 2.18 3.24 2.13 0.0579 2100 2500 6.6
3.9370 7.0866 2.3740 0.08 4.7 6.5 145000 104000
15.0
23220YM 100 180 60.3 2.0 118 165 646 463 0.31 2.18 3.24 2.13 0.0579 2100 2500 6.6
3.9370 7.0866 2.3740 0.08 4.7 6.5 145000 104000
15.0
22320CJ 100 215 73.0 2.5 125 187 756 586 0.36 1.90 2.82 1.85 0.0618 2300 2700 13.0
3.9370 8.4646 2.8740 0.10 4.9 7.4 170000 132000
28.7
22320YM 100 215 73.0 2.5 125 187 756 586 0.36 1.90 2.82 1.85 0.0618 2300 2700 13.0
3.9370 8.4646 2.8740 0.10 4.9 7.4 170000 132000
28.7
23122CJ 110 180 56.0 2.0 127 169 615 377 0.28 2.37 3.53 2.32 0.0596 2200 2600 5.6
4.3307 7.0866 2.2047 0.08 5.0 6.7 138000 84800
12.3
23122YM 110 180 56.0 2.0 127 169 615 377 0.28 2.37 3.53 2.32 0.0596 2200 2600 5.6
4.3307 7.0866 2.2047 0.08 5.0 6.7 138000 84800
12.3
24122CJ 110 180 69.0 2.0 124 164 676 448 0.36 1.85 2.76 1.81 0.0588 1800 2100 6.9
4.3307 7.0866 2.7165 0.08 4.9 6.5 152000 101000
15.2
22222CJ 110 200 53.0 2.0 132 179 627 475 0.25 2.69 4.00 2.63 0.0616 2500 3000 7.3
4.3307 7.8740 2.0866 0.08 5.2 7.0 141000 107000
16.1
22222YM 110 200 53.0 2.0 132 179 627 475 0.25 2.69 4.00 2.63 0.0616 2500 3000 7.3
4.3307 7.8740 2.0866 0.08 5.2 7.0 141000 107000
16.1
23222CJ 110 200 69.8 2.0 130 183 853 596 0.32 2.12 3.15 2.07 0.0618 1900 2200 9.6
4.3307 7.8740 2.7480 0.08 5.1 7.2 192000 134000
21.1
23222YM 110 200 69.8 2.0 130 183 853 596 0.32 2.12 3.15 2.07 0.0618 1900 2200 9.6
4.3307 7.8740 2.7480 0.08 5.1 7.2 192000 134000
21.1
22322CJ 110 240 80.0 2.5 139 208 962 733 0.35 1.92 2.86 1.88 0.0654 2000 2300 18.0
4.3307 9.4488 3.1496 0.10 5.5 8.2 216000 165000
39.5
22322YM 110 240 80.0 2.5 139 208 962 733 0.35 1.92 2.86 1.88 0.0654 2000 2300 18.0
4.3307 9.4488 3.1496 0.10 5.5 8.2 216000 165000
39.5
23322YM 110 240 92.1 2.5 137 210 1070 808 0.40 1.67 2.49 1.63 0.0641 1500 1700 20.7
4.3307 9.4488 3.6260 0.10 5.4 8.3 240000 182000
45.5
23024CJ 120 180 46.0 2.0 134 169 564 352 0.22 3.14 4.67 3.07 0.0616 2300 2900 4.1
4.7244 7.0866 1.8110 0.08 5.3 6.6 127000 79200
9.0
24024CJ 120 180 60.0 2.0 131 164 642 393 0.30 2.25 3.34 2.20 0.0610 2000 2400 5.3
4.7244 7.0866 2.3622 0.08 5.2 6.5 144000 88400
11.7
23124CJ 120 200 62.0 2.0 142 189 803 524 0.30 2.28 3.39 2.23 0.0636 2000 2300 7.8
4.7244 7.8740 2.4409 0.08 5.6 7.4 180000 118000
17.2
Y Y Y0
Caption:
Continued on next page.
TIMKEN PRODUCTS CATALOG B359
•
ROLLER BEARINGS
Caption:
Caption:
SPHERICAL ROLLER BEARINGS - continued
• Timken inventory systems are designed to provide fast delivery for frequently-ordered sizes and styles.
• Consult your Timken representative for up-to-date information about the availability of the bearings you have selected.
• Life calculations, shaft and housing ?ts, internal clearances, tolerances and other technical data for these bearings are found in the engineering section of this catalog.
• Bearings are available with a tapered bore for adapter type mounting. To order, add the suf?x “K” to bearing number (e.g., 23120K).
Caption: CJ
Caption:
A
B
Backing Diameter Load Ratings Equivalent Radial load Factors(1) Lubrication Reference Thermal
Bearing d D B R da Da Static Dynamic Dynamic Static Life Speed Ratings(3) Weight
Number Bore O.D. Width Fillet(2) Shaft Housing Load Rating Load Rating Adjustment
(max.) C0 C Factor(4)
Cg Grease Oil e
T
< – e
In All Cases X0 = 1
T
R
X = .67
> e
R
X = 1
Y Y Y0
mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. lbs. lbs. lbs.
23124YM 120 200 62.0 2.0 142 189 803 524 0.30 2.28 3.39 2.23 0.0636 2000 2300 7.8
4.7244 7.8740 2.4409 0.08 5.6 7.4 180000 118000
17.2
24124CJ 120 200 80.0 2.0 136 181 923 590 0.39 1.74 2.59 1.70 0.0625 1600 1800 10.1
4.7244 7.8740 3.1496 0.08 5.4 7.1 207000 133000
22.2
22224CJ 120 215 58.0 2.0 142 192 667 475 0.27 2.51 3.74 2.46 0.0648 2400 2900 9.1
4.7244 8.4646 2.2835 0.08 5.6 7.6 150000 107000
20.0
22224YM 120 215 58.0 2.0 142 192 667 475 0.27 2.51 3.74 2.46 0.0648 2400 2900 9.1
4.7244 8.4646 2.2835 0.08 5.6 7.6 150000 107000
20.0
23224YM 120 215 76.0 2.0 140 197 977 678 0.32 2.09 3.11 2.04 0.0647 1700 2000 12.0
4.7244 8.4646 2.9921 0.08 5.5 7.8 220000 152000
26.0
22324CJ 120 260 86.0 2.5 151 225 1090 825 0.35 1.92 2.85 1.87 0.0680 1800 2100 22.6
4.7244 10.2362 3.3858 0.10 5.9 8.9 245000 185000
49.6
22324YM 120 260 86.0 2.5 151 225 1090 825 0.35 1.92 2.85 1.87 0.0704 1800 2100 22.6
4.7244 10.2362 3.3858 0.10 5.9 8.9 245000 185000
49.6
23324YM 120 260 106.0 2.5 147 226 1420 1030 0.43 1.57 2.34 1.54 0.0681 1300 1400 27.8
4.7244 10.2362 4.1732 0.10 5.8 8.9 320000 232000
61.2
23926YM 130 180 37.0 1.5 142 169 427 245 0.18 3.76 5.60 3.68 0.0880 2000 2500 2.8
5.1181 7.0866 1.4567 0.06 5.6 6.7 95900 55000
6.2
23026CJ 130 200 52.0 2.0 146 187 703 446 0.22 3.01 4.48 2.94 0.0654 2200 2700 5.9
5.1181 7.8740 2.0472 0.08 5.8 7.4 158000 100000
13.0
24026CJ 130 200 69.0 2.0 144 182 795 501 0.32 2.09 3.11 2.04 0.0642 1900 2200 7.9
5.1181 7.8740 2.7165 0.08 5.7 7.2 179000 113000
17.3
23126CJ 130 210 64.0 2.0 149 195 888 562 0.29 2.34 3.49 2.29 0.0663 1800 2100 8.6
5.1181 8.2677 2.5197 0.08 5.9 7.7 200000 126000
19.0
23126YM 130 210 64.0 2.0 149 195 888 562 0.29 2.34 3.49 2.29 0.0663 1800 2100 8.6
5.1181 8.2677 2.5197 0.08 5.9 7.7 200000 126000
19.0
24126CJ 130 210 80.0 2.0 147 190 967 608 0.36 1.85 2.76 1.81 0.0655 1500 1700 10.7
5.1181 8.2677 3.1496 0.08 5.8 7.5 217000 137000
23.6
22226CJ 130 230 64.0 2.5 152 206 805 562 0.27 2.47 3.68 2.42 0.0676 2200 2600 11.4
5.1181 9.0551 2.5197 0.10 6.0 8.1 181000 126000
25.0
22226YM 130 230 64.0 2.5 152 206 805 562 0.27 2.47 3.68 2.42 0.0676 2200 2600 11.4
5.1181 9.0551 2.5197 0.10 6.0 8.1 181000 126000
25.0
23226YM 130 230 80.0 2.5 151 211 1110 759 0.32 2.12 3.15 2.07 0.0676 1600 1800 14.0
5.1181 9.0551 3.1496 0.10 5.9 8.3 249000 171000
31.0
22326CJ 130 280 93.0 3.0 161 242 1270 952 0.35 1.92 2.85 1.87 0.0610 1700 1900 28.2
5.1181 11.0236 3.6614 0.12 6.4 9.5 286000 214000
62.1
22326YM 130 280 93.0 3.0 161 242 1270 952 0.35 1.92 2.85 1.87 0.0610 1700 1900 28.2
5.1181 11.0236 3.6614 0.12 6.4 9.5 286000 214000
62.1
23326YM 130 280 112.0 3.0 164 244 1550 1090 0.42 1.62 2.42 1.59 0.0600 1200 1300 34.0
5.1181 11.0236 4.4094 0.12 6.5 9.6 348000 245000
74.7
23928YM 140 190 37.0 1.5 152 179 456 253 0.17 4.01 5.97 3.92 0.0920 1900 2300 3.0
5.5118 7.4803 1.4567 0.06 6.0 7.1 102000 56900
6.6
Caption:
A
(1) These factors apply for both inch and metric calculations. See engineering section for instructions on use.
(2) Maximum shaft or housing ?llet radius that bearing corners will clear.
* Available in standard shaker screen bearing design con?guration
(example: 223xxYMW33W800C4).
(3) See thermal speed ratings in the engineering section.
(4) Geometry constant for Lubrication Life Adjustment Factor a3l. See "Bearing Load Ratings and Life Calculations."
•
B360 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearings
Caption:
YM
Caption:
Caption:
VCSJ
Caption:
Backing Diameter Load Ratings Equivalent Radial load Factors(1) Lubrication Reference Thermal
Bearing d D B R da Da Static Dynamic Dynamic Static Life Speed Ratings(3) Weight
Number Bore O.D. Width Fillet(2) Shaft Housing Load Rating Load Rating Adjustment
(max.) C0 C Factor(4)
Cg Grease Oil
A
B
A
T R
X = 1
< – e
T
R
X = .67
> e In All
Cases X0 = 1
e
mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. lbs. lbs. lbs.
23028CJ 140 210 53.0 2.0 156 197 764 471 0.22 3.14 4.67 3.07 0.0680 2000 2500 6.4
5.5118 8.2677 2.0866 0.08 6.1 7.8 173000 106000
14.0
24028CJ 140 210 69.0 2.0 154 192 899 527 0.31 2.21 3.29 2.16 0.0676 1700 2000 8.3
5.5118 8.2677 2.7165 0.08 6.1 7.6 202000 118000
18.3
23128YM 140 225 68.0 2.0 159 209 1010 636 0.29 2.37 3.52 2.31 0.0670 1700 2000 10.0
5.5118 8.8583 2.6772 0.08 6.3 8.2 228000 143000
23.0
24128CJ 140 225 85.0 2.0 156 203 1120 701 0.36 1.90 2.83 1.86 0.0684 1300 1500 13.0
5.5118 8.8583 3.3465 0.08 6.2 8.0 252000 158000
28.6
26228YM 140 240 80.0 2.5 161 217 1120 726 0.32 2.08 3.10 2.04 0.0693 1200 1400 14.7
5.5118 9.4488 3.1496 0.10 6.3 8.6 251000 163000
32.4
22228CJ 140 250 68.0 2.5 166 225 930 646 0.27 2.51 3.73 2.45 0.0713 2000 2400 14.4
5.5118 9.8425 2.6772 0.10 6.5 8.9 209000 145000
31.7
22228YM 140 250 68.0 2.5 166 225 930 646 0.27 2.51 3.73 2.45 0.0713 2000 2400 14.4
5.5118 9.8425 2.6772 0.10 6.5 8.9 209000 145000
31.7
22328CJ 140 300 102.0 3.0 174 262 1520 1120 0.36 1.88 2.81 1.84 0.0648 1500 1700 35.4
5.5118 11.8110 4.0157 0.12 6.9 10.3 341000 252000
77.9
22328YM 140 300 102.0 3.0 174 262 1520 1120 0.36 1.88 2.81 1.84 0.0648 1500 1700 35.4
5.5118 11.8110 4.0157 0.12 6.9 10.3 341000 252000
77.9
23328YM 140 300 118.0 3.0 175 261 1920 1310 0.41 1.64 2.45 1.61 0.0632 1000 1100 41.0
5.5118 11.8110 4.6457 0.12 6.9 10.3 432000 295000
90.1
23030YM 150 225 56.0 2.0 169 211 872 521 0.21 3.20 4.77 3.13 0.0714 1900 2300 7.8
5.9055 8.8583 2.2047 0.08 6.6 8.3 196000 117000
17.0
24030CJ 150 225 75.0 2.0 166 206 1000 603 0.31 2.18 3.24 2.13 0.0699 1600 1900 10.4
5.9055 8.8583 2.9528 0.08 6.5 8.1 226000 136000
22.9
23130YM 150 250 80.0 2.0 172 230 1320 837 0.31 2.20 3.27 2.15 0.0614 1500 1700 16.0
5.9055 9.8425 3.1496 0.08 6.8 9.1 298000 188000
35.0
24130CJ 150 250 100.0 2.0 169 225 1400 901 0.38 1.78 2.65 1.74 0.0603 1200 1300 19.7
5.9055 9.8425 3.9370 0.08 6.7 8.9 315000 203000
43.4
22230CJ 150 270 73.0 2.5 179 242 1100 752 0.27 2.52 3.75 2.46 0.0626 1800 2200 18.2
5.9055 10.6299 2.8740 0.10 7.0 9.5 247000 169000
39.9
22230YM 150 270 73.0 3.0 177 248 1200 853 0.25 2.74 4.08 2.68 0.0626 1800 2100 18.0
5.9055 10.6299 2.8740 0.10 7.0 9.8 269000 192000
40.0
23230YM 150 270 96.0 2.5 175 247 1590 1060 0.33 2.03 3.02 1.98 0.0625 1300 1500 24.0
5.9055 10.6299 3.7795 0.10 6.9 9.7 357000 239000
53.0
22330CJ 150 320 108.0 3.0 186 280 1720 1260 0.35 1.91 2.84 1.87 0.0667 1400 1600 42.6
5.9055 12.5984 4.2520 0.12 7.3 11.0 386000 283000
93.6
22330YM 150 320 108.0 3.0 186 280 1720 1260 0.35 1.91 2.84 1.87 0.0667 1400 1600 42.6
5.9055 12.5984 4.2520 0.12 7.3 11.0 386000 283000
93.6
23330YM 150 320 128.0 3.0 185 280 2130 1480 0.41 1.64 2.44 1.60 0.0654 960 1100 50.4
5.9055 12.5984 5.0394 0.12 7.3 11.0 478000 332000
111
23932YM 160 220 45.0 2.0 175 206 655 348 0.19 3.60 5.35 3.52 0.0724 1800 2100 5.1
6.2992 8.6614 1.7717 0.08 6.9 8.1 147000 78200
11.1
Y Y Y0
Caption:
Continued on next page.
TIMKEN PRODUCTS CATALOG B361
•
ROLLER BEARINGS
Caption:
Caption:
SPHERICAL ROLLER BEARINGS - continued
• Timken inventory systems are designed to provide fast delivery for frequently-ordered sizes and styles.
• Consult your Timken representative for up-to-date information about the availability of the bearings you have selected.
• Life calculations, shaft and housing ?ts, internal clearances, tolerances and other technical data for these bearings are found in the engineering section of this catalog.
• Bearings are available with a tapered bore for adapter type mounting. To order, add the suf?x “K” to bearing number (e.g., 23120K).
Caption: CJ
Caption:
A
B
Backing Diameter Load Ratings Equivalent Radial load Factors(1) Lubrication Reference Thermal
Bearing d D B R da Da Static Dynamic Dynamic Static Life Speed Ratings(3) Weight
Number Bore O.D. Width Fillet(2) Shaft Housing Load Rating Load Rating Adjustment
(max.) C0 C Factor(4)
Cg Grease Oil e
T
< – e
In All Cases X0 = 1
T
R
X = .67
> e
R
X = 1
Y Y Y0
mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. lbs. lbs. lbs.
23032YM 160 240 60.0 2.0 179 225 979 591 0.21 3.20 4.77 3.13 0.0620 1700 2100 9.4
6.2992 9.4488 2.3622 0.08 7.0 8.9 220000 133000
21.0
24032CJ 160 240 80.0 2.0 173 224 1100 665 0.30 2.28 3.39 2.23 0.0611 1500 1800 12.6
6.2992 9.4488 3.1496 0.08 6.8 8.8 246000 150000
27.8
23132YM 160 270 86.0 2.0 189 244 1560 968 0.30 2.23 3.32 2.18 0.0633 1400 1600 20.1
6.2992 10.6299 3.3858 0.08 7.4 9.6 350000 218000
44.1
22232CJ 160 290 80.0 2.5 192 260 1280 864 0.27 2.47 3.67 2.41 0.0655 1700 2000 23.1
6.2992 11.4173 3.1496 0.10 7.6 10.2 288000 194000
50.8
23232YM 160 290 104.0 2.5 187 260 1680 1090 0.34 1.96 2.91 1.91 0.0645 1200 1400 30.0
6.2992 11.4173 4.0945 0.10 7.4 10.2 377000 246000
66.0
22332CJ 160 340 114.0 3.0 198 298 1920 1400 0.35 1.92 2.86 1.88 0.0702 1300 1500 50.6
6.2992 13.3858 4.4882 0.12 7.8 11.7 432000 314000
111
22332YMB 160 340 114.0 3.0 198 298 1920 1400 0.35 1.92 2.86 1.88 0.0702 1300 1500 50.6
6.2992 13.3858 4.4882 0.12 7.8 11.7 432000 314000
111
23332YM 160 340 136.0 3.0 202 297 2540 1670 0.42 1.62 2.41 1.58 0.0686 850 940 60.4
6.2992 13.3858 5.3543 0.12 8.0 11.7 572000 375000
133
23934YM 170 230 45.0 2.0 184 217 692 371 0.18 3.79 5.65 3.71 0.0627 1600 2000 5.3
6.6929 9.0551 1.7717 0.08 7.3 8.6 156000 83400
11.7
23034YM 170 260 67.0 2.0 192 243 1220 724 0.22 3.07 4.57 3.00 0.0649 1600 1900 12.8
6.6929 10.2362 2.6378 0.08 7.6 9.6 274000 163000
28.1
24034CJ 170 260 90.0 2.0 185 242 1430 851 0.32 2.12 3.15 2.07 0.0641 1300 1600 17.2
6.6929 10.2362 3.5433 0.08 7.3 9.5 322000 191000
38.0
23134YM 170 280 88.0 2.0 194 255 1670 1010 0.30 2.28 3.40 2.23 0.0654 1300 1500 21.5
6.6929 11.0236 3.4646 0.08 7.7 10.2 375000 226000
47.3
24134CJ 170 280 109.0 2.0 191 252 1840 1110 0.37 1.83 2.72 1.79 0.0657 980 1100 26.6
6.6929 11.0236 4.2913 0.08 7.5 10.1 413000 248000
58.5
22234CJ 170 310 86.0 3.0 201 278 1450 999 0.28 2.44 3.63 2.38 0.0672 1600 1900 28.5
6.6929 12.2047 3.3858 0.12 7.9 10.9 326000 225000
62.7
23234YM 170 310 110.0 3.0 200 276 1960 1240 0.34 1.97 2.94 1.93 0.0676 1100 1200 36.5
6.6929 12.2047 4.3307 0.12 7.9 10.9 441000 279000
80.2
23036YM 180 280 74.0 2.0 204 261 1420 851 0.23 2.95 4.40 2.89 0.0677 1500 1800 17.0
7.0866 11.0236 2.9134 0.08 8.0 10.3 321000 192000
37.0
24036CJ 180 280 100.0 2.0 198 260 1700 992 0.33 2.03 3.02 1.98 0.0671 1200 1500 23.0
7.0866 11.0236 3.9370 0.08 7.8 10.2 385000 223000
50.0
23136YM 180 300 96.0 2.5 205 273 1810 1100 0.31 2.20 3.28 2.15 0.0677 1200 1400 27.0
7.0866 11.8110 3.7795 0.10 8.1 10.8 406000 247000
60.0
24136CJ 180 300 118.0 2.5 201 275 2050 1250 0.38 1.78 2.65 1.74 0.0680 920 1000 33.0
7.0866 11.8110 4.6457 0.10 7.9 10.8 464000 280000
74.0
22236CJ 180 320 86.0 3.0 213 288 1540 1030 0.27 2.54 3.78 2.48 0.0698 1500 1700 30.0
7.0866 12.5984 3.3858 0.12 8.4 11.3 346000 231000
65.0
23236YM 180 320 112.0 3.0 209 288 2110 1330 0.34 2.00 2.97 1.95 0.0694 1000 1200 39.0
7.0866 12.5984 4.4094 0.12 8.2 11.3 473000 298000
85.0
Caption:
A
(1) These factors apply for both inch and metric calculations. See engineering section for instructions on use.
(2) Maximum shaft or housing ?llet radius that bearing corners will clear.
* Available in standard shaker screen bearing design con?guration
(example: 223xxYMW33W800C4).
(3) See thermal speed ratings in the engineering section.
(4) Geometry constant for Lubrication Life Adjustment Factor a3l. See "Bearing Load Ratings and Life Calculations."
•
B362 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearings
Caption:
YM
Caption:
Caption:
> e In All
Cases X0 = 1
VCSJ
Caption:
Backing Diameter Load Ratings Equivalent Radial load Factors(1) Lubrication Reference Thermal
Bearing d D B R da Da Static Dynamic Dynamic Static Life Speed Ratings(3) Weight
Number Bore O.D. Width Fillet(2) Shaft Housing Load Rating Load Rating Adjustment
(max.) C0 C Factor(4)
Cg Grease Oil
A
B
A
T R
X = 1
< – e
T
R
X = .67
e
mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. lbs. lbs. lbs.
22336YMB 180 380 126.0 3.0 222 334 2460 1760 0.34 1.98 2.94 1.93 0.0730 1100 1200 69.0
7.0866 14.9606 4.9606 0.12 8.8 13.1 554000 395000
153
23938YM 190 260 52.0 2.0 207 245 910 480 0.18 3.84 5.72 3.75 0.0677 1400 1700 8.1
7.4803 10.2362 2.0472 0.08 8.2 9.6 205000 108000
18.0
23038YM 190 290 75.0 2.0 213 271 1540 901 0.22 3.01 4.48 2.94 0.0698 1400 1700 18.0
7.4803 11.4173 2.9528 0.08 8.4 10.7 349000 203000
39.0
24038CJ 190 290 100.0 2.0 211 264 1810 957 0.31 2.16 3.22 2.12 0.0682 1200 1400 24.0
7.4803 11.4173 3.9370 0.08 8.3 10.4 407000 215000
52.0
23138YM 190 320 104.0 2.5 218 290 2090 1250 0.31 2.15 3.21 2.11 0.0716 1100 1300 34.0
7.4803 12.5984 4.0945 0.10 8.6 11.4 470000 282000
75.0
24138CJ 190 320 128.0 2.5 211 286 2310 1350 0.40 1.68 2.50 1.64 0.0710 860 950 42.0
7.4803 12.5984 5.0394 0.10 8.3 11.3 520000 305000
92.0
22238YM 190 340 92.0 3.0 224 306 1810 1200 0.27 2.53 3.77 2.48 0.0725 1400 1600 36.0
7.4803 13.3858 3.6220 0.12 8.8 12.0 407000 270000
79.0
23238YM 190 340 120.0 3.0 221 306 2390 1490 0.34 1.99 2.96 1.95 0.0714 960 1100 47.0
7.4803 13.3858 4.7244 0.12 8.7 12.0 536000 335000
104
22338YMB 190 400 132.0 4.0 236 350 2730 1900 0.34 1.97 2.94 1.93 0.0761 1000 1200 80.0
7.4803 15.7480 5.1969 0.16 9.3 13.8 614000 428000
177
23940YM 200 280 60.0 2.0 219 263 1140 608 0.19 3.65 5.43 3.57 0.0704 1400 1600 11.0
7.8740 11.0236 2.3622 0.08 8.6 10.3 256000 137000
25.0
23040YM 200 310 82.0 2.0 225 289 1760 1040 0.23 2.95 4.40 2.89 0.0723 1300 1600 23.0
7.8740 12.2047 3.2283 0.08 8.9 11.4 398000 234000
50.0
24040CJ 200 310 109.0 2.0 223 284 2080 1120 0.32 2.09 3.11 2.04 0.0710 1100 1300 30.0
7.8740 12.2047 4.2913 0.08 8.8 11.2 468000 251000
66.0
23140YM 200 340 112.0 2.5 230 308 2300 1390 0.31 2.15 3.20 2.10 0.0730 1100 1200 42.0
7.8740 13.3858 4.4094 0.10 9.0 12.1 518000 313000
92.0
23140YMB 200 340 112.0 2.5 230 308 2300 1390 0.31 2.15 3.20 2.10 0.0730 1100 1200 42.0
7.8740 13.3858 4.4094 0.10 9.0 12.1 518000 313000
92.0
24140YMB 200 340 140.0 2.5 226 308 2950 1690 0.39 1.74 2.59 1.70 0.0730 750 830 52.0
7.8740 13.3858 5.5118 0.10 8.9 12.1 663000 380000
115
22240YMB 200 360 98.0 3.0 236 323 2030 1330 0.27 2.50 3.72 2.44 0.0751 1300 1500 43.0
7.8740 14.1732 3.8583 0.12 9.3 12.7 456000 300000
95.0
23240YM 200 360 128.0 3.0 233 323 2720 1670 0.35 1.95 2.90 1.91 0.0746 890 1000 56.0
7.8740 14.1732 5.0394 0.12 9.2 12.7 611000 376000
124
26340YM 200 380 126.0 4.0 240 337 2710 1740 0.33 2.02 3.01 1.98 0.0759 700 780 65.8
7.8740 14.9606 4.9606 0.16 9.4 13.3 610000 391000
145
22340YMB 200 420 138.0 4.0 247 369 2950 2070 0.33 2.02 3.01 1.98 0.0778 970 1100 93.0
7.8740 16.5354 5.4331 0.16 9.7 14.5 663000 465000
204
23340YM 200 420 165.0 4.0 246 366 3750 2450 0.41 1.66 2.47 1.62 0.0784 640 700 111
7.8740 16.5354 6.4961 0.16 9.7 14.4 844000 550000
244
23944YM 220 300 60.0 2.0 239 283 1220 632 0.17 3.94 5.87 3.85 0.0743 1200 1500 12.0
8.6614 11.8110 2.3622 0.08 9.4 11.2 275000 142000
27.0
Y Y Y0
Caption:
Continued on next page.
TIMKEN PRODUCTS CATALOG B363
•
ROLLER BEARINGS
Caption:
Caption:
SPHERICAL ROLLER BEARINGS - continued
• Timken inventory systems are designed to provide fast delivery for frequently-ordered sizes and styles.
• Consult your Timken representative for up-to-date information about the availability of the bearings you have selected.
• Life calculations, shaft and housing ?ts, internal clearances, tolerances and other technical data for these bearings are found in the engineering section of this catalog.
• Bearings are available with a tapered bore for adapter type mounting. To order, add the suf?x “K” to bearing number (e.g., 23120K).
Caption: CJ
Caption:
A
B
Backing Diameter Load Ratings Equivalent Radial load Factors(1) Lubrication Reference Thermal
Bearing d D B R da Da Static Dynamic Dynamic Static Life Speed Ratings(3) Weight
Number Bore O.D. Width Fillet(2) Shaft Housing Load Rating Load Rating Adjustment
(max.) C0 C Factor(4)
Cg Grease Oil e
T
< – e
In All Cases X0 = 1
T
R
X = .67
> e
R
X = 1
Y Y Y0
mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. lbs. lbs. lbs.
23044YM 220 340 90.0 2.5 247 313 1990 1130 0.24 2.77 4.13 2.71 0.0767 1200 1400 30.0
8.6614 13.3858 3.5433 0.10 9.7 12.3 447000 254000
66.0
24044YM 220 340 118.0 2.5 245 313 2740 1450 0.32 2.14 3.18 2.09 0.0762 930 1100 39.0
8.6614 13.3858 4.6457 0.10 9.6 12.3 616000 326000
86.0
23144YM 220 370 120.0 3.0 252 336 2760 1630 0.31 2.17 3.24 2.12 0.0777 940 1100 52.0
8.6614 14.5669 4.7244 0.12 9.9 13.2 621000 366000
115
23144YMB 220 370 120.0 3.0 252 336 2760 1630 0.31 2.17 3.24 2.12 0.0777 940 1100 52.0
8.6614 14.5669 4.7244 0.12 9.9 13.2 621000 366000
115
24144YMB 220 370 150.0 3.0 248 337 3250 1870 0.36 1.86 2.77 1.82 0.0773 690 760 65.0
8.6614 14.5669 5.9055 0.12 9.8 13.3 730000 421000
144
22244YMB 220 400 108.0 3.0 261 359 2330 1550 0.27 2.51 3.73 2.45 0.0810 1200 1400 59.0
8.6614 15.7480 4.2520 0.12 10.3 14.1 524000 349000
131
23244YM 220 400 144.0 3.0 257 359 3380 2080 0.35 1.95 2.90 1.90 0.0790 780 870 79.0
8.6614 15.7480 5.6693 0.12 10.1 14.1 760000 467000
174
26344YM 220 420 138.0 4.0 265 372 3280 2080 0.33 2.04 3.03 1.99 0.0808 610 680 88.2
8.6614 16.5354 5.4331 0.16 10.4 14.6 738000 468000
194
22344YMB 220 460 145.0 4.0 273 404 3490 2400 0.32 2.08 3.10 2.04 0.0834 840 950 116
8.6614 18.1102 5.7087 0.16 10.7 15.9 784000 540000
257
23344YM 220 460 180.0 4.0 269 402 4500 2900 0.40 1.67 2.48 1.63 0.0832 560 610 145
8.6614 18.1102 7.0866 0.16 10.6 15.8 1010000 652000
319
23948YM 240 320 60.0 2.0 260 303 1360 666 0.16 4.19 6.24 4.09 0.0782 1100 1300 13.0
9.4488 12.5984 2.3622 0.08 10.2 11.9 306000 150000
29.0
23048YM 240 360 92.0 2.5 267 334 2150 1180 0.23 2.91 4.34 2.85 0.0797 1100 1300 33.0
9.4488 14.1732 3.6220 0.10 10.5 13.1 484000 266000
72.0
24048YM 240 360 118.0 2.5 265 334 2920 1500 0.29 2.31 3.44 2.26 0.0797 850 980 42.0
9.4488 14.1732 4.6457 0.10 10.4 13.1 657000 338000
92.0
23148YMB 240 400 128.0 3.0 276 364 3200 1850 0.30 2.28 3.40 2.23 0.0817 850 970 65.0
9.4488 15.7480 5.0394 0.12 10.9 14.3 719000 415000
142
24148YMB 240 400 160.0 3.0 271 364 4090 2250 0.37 1.80 2.68 1.76 0.0817 580 640 81.0
9.4488 15.7480 6.2992 0.12 10.7 14.3 919000 505000
178
22248YMB 240 440 120.0 3.0 284 395 2970 1960 0.27 2.46 3.67 2.41 0.0840 1000 1200 80.0
9.4488 17.3228 4.7244 0.12 11.2 15.6 668000 441000
177
23248YM 240 440 160.0 3.0 281 394 4190 2540 0.35 1.92 2.86 1.88 0.0839 680 760 107
9.4488 17.3228 6.2992 0.12 11.1 15.5 942000 571000
236
26348YM 240 460 147.0 4.0 286 410 3720 2430 0.32 2.08 3.10 2.04 0.0852 550 610 113
9.4488 18.1102 5.7874 0.16 11.3 16.2 836000 547000
248
22348YMB 240 500 155.0 4.0 297 439 3990 2740 0.32 2.10 3.13 2.05 0.0880 760 850 147
9.4488 19.6850 6.1024 0.16 11.7 17.3 897000 616000
324
23348YM 240 500 195.0 4.0 293 437 5320 3380 0.40 1.67 2.49 1.64 0.0878 500 540 185
9.4488 19.6850 7.6772 0.16 11.5 17.2 1200000 761000
407
26250YM 250 410 128.0 3.0 284 374 3180 1830 0.30 2.28 3.39 2.23 0.0831 580 650 64.0
9.8425 16.1417 5.0394 0.12 11.2 14.7 714000 412000
141
Caption:
A
(1) These factors apply for both inch and metric calculations. See engineering section for instructions on use.
(2) Maximum shaft or housing ?llet radius that bearing corners will clear.
* Available in standard shaker screen bearing design con?guration
(example: 223xxYMW33W800C4).
(3) See thermal speed ratings in the engineering section.
(4) Geometry constant for Lubrication Life Adjustment Factor a3l. See "Bearing Load Ratings and Life Calculations."
•
B364 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearings
Caption:
YM
Caption:
Caption:
VCSJ
Caption:
Backing Diameter Load Ratings Equivalent Radial load Factors(1) Lubrication Reference Thermal
Bearing d D B R da Da Static Dynamic Dynamic Static Life Speed Ratings(3) Weight
Number Bore O.D. Width Fillet(2) Shaft Housing Load Rating Load Rating Adjustment
(max.) C0 C Factor(4)
Cg Grease Oil
A
B
A
T R
X = 1
< – e
T
R
X = .67
> e In All
Cases X0 = 1
e
mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. lbs. lbs. lbs.
23952YM 260 360 75.0 2.0 284 339 1880 951 0.18 3.74 5.56 3.65 0.0830 1000 1200 23.0
10.2362 14.1732 2.9528 0.08 11.2 13.3 422000 214000
50.0
23052YM 260 400 104.0 3.0 291 369 2770 1540 0.24 2.85 4.24 2.78 0.0847 990 1200 47.0
10.2362 15.7480 4.0945 0.12 11.5 14.5 622000 345000
104
23052YMB 260 400 104.0 3.0 291 369 2770 1540 0.24 2.85 4.24 2.78 0.0847 990 1200 47.0
10.2362 15.7480 4.0945 0.12 11.5 14.5 622000 345000
104
24052YM 260 400 140.0 3.0 288 369 3870 1990 0.32 2.12 3.15 2.07 0.0846 750 860 64.0
10.2362 15.7480 5.5118 0.12 11.3 14.5 871000 448000
140
23152YMB 260 440 144.0 3.0 302 400 3970 2240 0.30 2.23 3.31 2.18 0.0867 760 860 89.0
10.2362 17.3228 5.6693 0.12 11.9 15.7 891000 504000
197
24152YMB 260 440 180.0 3.0 296 398 4840 2630 0.37 1.82 2.70 1.78 0.0865 530 570 112
10.2362 17.3228 7.0866 0.12 11.7 15.7 1090000 592000
246
22252YMB 260 480 130.0 4.0 309 430 3530 2300 0.27 2.46 3.66 2.41 0.0887 910 1100 104
10.2362 18.8976 5.1181 0.16 12.2 16.9 793000 518000
230
23252YM 260 480 174.0 4.0 308 430 4880 2930 0.34 1.98 2.95 1.94 0.0893 610 680 139
10.2362 18.8976 6.8504 0.16 12.1 16.9 1100000 658000
307
22352YMB 260 540 165.0 5.0 321 475 4590 3130 0.32 2.13 3.17 2.08 0.0924 680 770 182
10.2362 21.2598 6.4961 0.20 12.6 18.7 1030000 703000
401
23352YM 260 540 206.0 5.0 318 473 6040 3830 0.39 1.71 2.54 1.67 0.0923 450 480 227
10.2362 21.2598 8.1102 0.20 12.5 18.6 1360000 861000
501
23956YMB 280 380 75.0 2.0 304 360 2000 1000 0.17 3.95 5.88 3.86 0.0865 920 1100 24.0
11.0236 14.9606 2.9528 0.08 12.0 14.2 450000 225000
54.0
23056YMB 280 420 106.0 3.0 312 389 2830 1540 0.23 2.92 4.35 2.86 0.0879 930 1100 51.0
11.0236 16.5354 4.1732 0.12 12.3 15.3 636000 346000
113
24056YMB 280 420 140.0 3.0 310 388 4130 2030 0.30 2.25 3.35 2.20 0.0883 690 790 68.0
11.0236 16.5354 5.5118 0.12 12.2 15.3 927000 456000
149
23156YMB 280 460 146.0 4.0 320 419 4200 2330 0.30 2.26 3.36 2.21 0.0900 710 800 96.0
11.0236 18.1102 5.7480 0.16 12.6 16.5 944000 524000
211
24156YMB 280 460 180.0 4.0 319 419 5100 2670 0.36 1.86 2.77 1.82 0.0899 490 530 118
11.0236 18.1102 7.0866 0.16 12.6 16.5 1150000 601000
260
22256YMB 280 500 130.0 4.0 331 449 3780 2360 0.26 2.62 3.91 2.57 0.0927 850 990 110
11.0236 19.6850 5.1181 0.16 13.0 17.7 850000 530000
242
23256YMB 280 500 176.0 4.0 329 450 5290 3070 0.33 2.07 3.08 2.02 0.0921 560 620 149
11.0236 19.6850 6.9291 0.16 13.0 17.7 1190000 689000
328
22356YMB 280 580 175.0 5.0 345 511 5320 3590 0.32 2.13 3.17 2.08 0.0968 620 690 222
11.0236 22.8346 6.8898 0.20 13.6 20.1 1200000 806000
490
23356YM 280 580 224.0 5.0 341 508 7100 4430 0.40 1.69 2.52 1.65 0.0966 400 430 284
11.0236 22.8346 8.8189 0.20 13.4 20.0 1600000 997000
627
23960YMB 300 420 90.0 2.5 328 394 2650 1330 0.19 3.59 5.34 3.51 0.0911 840 1000 38.0
11.8110 16.5354 3.5433 0.10 12.9 15.5 596000 300000
84.0
23060YMB 300 460 118.0 3.0 336 425 3600 1970 0.24 2.87 4.27 2.80 0.0926 830 980 71.0
11.8110 18.1102 4.6457 0.12 13.2 16.8 809000 442000
156
Y Y Y0
Caption:
Continued on next page.
TIMKEN PRODUCTS CATALOG B365
•
ROLLER BEARINGS
Caption:
Caption:
SPHERICAL ROLLER BEARINGS - continued
• Timken inventory systems are designed to provide fast delivery for frequently-ordered sizes and styles.
• Consult your Timken representative for up-to-date information about the availability of the bearings you have selected.
• Life calculations, shaft and housing ?ts, internal clearances, tolerances and other technical data for these bearings are found in the engineering section of this catalog.
• Bearings are available with a tapered bore for adapter type mounting. To order, add the suf?x “K” to bearing number (e.g., 23120K).
Caption: CJ
Caption:
A
B
Backing Diameter Load Ratings Equivalent Radial load Factors(1) Lubrication Reference Thermal
Bearing d D B R da Da Static Dynamic Dynamic Static Life Speed Ratings(3) Weight
Number Bore O.D. Width Fillet(2) Shaft Housing Load Rating Load Rating Adjustment
(max.) C0 C Factor(4)
Cg Grease Oil e
T
< – e
In All Cases X0 = 1
T
R
X = .67
> e
R
X = 1
Y Y Y0
mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. lbs. lbs. lbs.
24060YMB 300 460 160.0 3.0 334 423 5230 2560 0.32 2.11 3.13 2.06 0.0928 620 700 96.0
11.8110 18.1102 6.2992 0.12 13.1 16.7 1180000 576000
211
23160YMB 300 500 160.0 4.0 345 453 5160 2810 0.30 2.25 3.35 2.20 0.0946 630 710 126
11.8110 19.6850 6.2992 0.16 13.6 17.8 1160000 632000
278
24160YMB 300 500 200.0 4.0 338 455 6320 3380 0.37 1.82 2.71 1.78 0.0942 430 460 158
11.8110 19.6850 7.8740 0.16 13.3 17.9 1420000 759000
347
22260YMB 300 540 140.0 4.0 355 484 4430 2760 0.26 2.59 3.86 2.53 0.0965 770 890 139
11.8110 21.2598 5.5118 0.16 14.0 19.1 997000 621000
306
23260YMB 300 540 192.0 4.0 353 482 6210 3510 0.34 2.00 2.98 1.96 0.0967 510 560 191
11.8110 21.2598 7.5591 0.16 13.9 19.0 1400000 788000
420
23964YMB 320 440 90.0 2.5 349 414 2800 1360 0.18 3.79 5.65 3.71 0.0946 780 930 40.0
12.5984 17.3228 3.5433 0.10 13.8 16.3 629000 305000
89.0
23064YMB 320 480 121.0 3.0 357 444 3910 2040 0.23 2.93 4.36 2.86 0.0962 780 910 76.0
12.5984 18.8976 4.7638 0.12 14.1 17.5 880000 458000
168
24064YMB 320 480 160.0 3.0 354 444 5420 2620 0.30 2.24 3.34 2.19 0.0961 580 660 101
12.5984 18.8976 6.2992 0.12 13.9 17.5 1220000 588000
222
23164YMB 320 540 176.0 4.0 367 490 6000 3330 0.31 2.14 3.19 2.10 0.0988 580 650 164
12.5984 21.2598 6.9291 0.16 14.4 19.3 1350000 749000
361
24164YMB 320 540 218.0 4.0 362 489 7580 3980 0.38 1.77 2.63 1.73 0.0986 380 410 203
12.5984 21.2598 8.5827 0.16 14.3 19.3 1710000 894000
448
22264YMB 320 580 150.0 4.0 380 519 5040 3110 0.26 2.58 3.84 2.52 0.1009 710 820 173
12.5984 22.8346 5.9055 0.16 15.0 20.4 1130000 700000
381
23264YMB 320 580 208.0 4.0 379 516 7140 3960 0.34 1.98 2.94 1.93 0.1013 460 510 240
12.5984 22.8346 8.1890 0.16 14.9 20.3 1610000 891000
528
23968YMB 340 460 90.0 2.5 369 435 3020 1420 0.17 3.98 5.93 3.89 0.0983 730 860 43.0
13.3858 18.1102 3.5433 0.10 14.5 17.1 678000 320000
94.0
23068YMB 340 520 133.0 4.0 384 481 4670 2430 0.23 2.96 4.40 2.89 0.1005 710 830 101
13.3858 20.4724 5.2362 0.16 15.1 18.9 1050000 546000
223
24068YMB 340 520 180.0 4.0 377 479 6590 3190 0.32 2.14 3.18 2.09 0.1004 530 600 137
13.3858 20.4724 7.0866 0.16 14.9 18.9 1480000 717000
302
23168YMB 340 580 190.0 4.0 397 526 6900 3750 0.30 2.22 3.30 2.17 0.1033 530 590 206
13.3858 22.8346 7.4803 0.16 15.6 20.7 1550000 843000
455
24168YMB 340 580 243.0 4.0 385 525 8970 4720 0.39 1.75 2.61 1.71 0.1033 340 370 264
13.3858 22.8346 9.5669 0.16 15.2 20.7 2020000 1060000
582
23268YMB 340 620 224.0 5.0 399 554 8290 4700 0.35 1.91 2.84 1.86 0.1051 420 460 296
13.3858 24.4094 8.8189 0.20 15.7 21.8 1860000 1060000
653
23972YMB 360 480 90.0 2.5 389 455 3170 1460 0.16 4.12 6.13 4.03 0.1013 680 810 45.0
14.1732 18.8976 3.5433 0.10 15.3 17.9 712000 328000
98.0
23072YMB 360 540 134.0 4.0 403 499 4640 2390 0.23 2.94 4.38 2.88 0.1035 680 800 107
14.1732 21.2598 5.2756 0.16 15.9 19.7 1040000 538000
236
24072YMB 360 540 180.0 4.0 398 500 6900 3270 0.30 2.24 3.33 2.19 0.1036 500 560 144
14.1732 21.2598 7.0866 0.16 15.7 19.7 1550000 736000
316
Caption:
A
(1) These factors apply for both inch and metric calculations. See engineering section for instructions on use.
(2) Maximum shaft or housing ?llet radius that bearing corners will clear.
* Available in standard shaker screen bearing design con?guration
(example: 223xxYMW33W800C4).
(3) See thermal speed ratings in the engineering section.
(4) Geometry constant for Lubrication Life Adjustment Factor a3l. See "Bearing Load Ratings and Life Calculations."
•
B366 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearings
VCSJ
Backing Diameter Load Ratings Equivalent Radial load Factors(1) Lubrication Reference Thermal
Bearing d D B R da Da Static Dynamic Dynamic Static Life Speed Ratings(3) Weight
Number Bore O.D. Width Fillet(2) Shaft Housing Load Rating Load Rating Adjustment
(max.) C0 C Factor(4)
Cg Grease Oil
Caption:
Caption:
YM
Caption:
Caption:
A
B
A
T R
X = 1
< – e
> e In All
Cases X0 = 1
T
R
X = .67
e
mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. lbs. lbs. lbs.
23172YMB 360 600 192.0 4.0 419 546 7360 3880 0.29 2.29 3.42 2.24 0.1065 500 560 218
14.1732 23.6220 7.5591 0.16 16.5 21.5 1650000 872000
480
24172YMB 360 600 243.0 4.0 406 545 9620 4890 0.38 1.79 2.67 1.75 0.1064 320 340 276
14.1732 23.6220 9.5669 0.16 16.0 21.4 2160000 1100000
608
23272YMB 360 650 232.0 5.0 420 583 8900 5040 0.35 1.95 2.91 1.91 0.1086 400 430 334
14.1732 25.5906 9.1339 0.20 16.5 22.9 2000000 1130000
737
23976YMB 380 520 106.0 3.0 416 488 3970 1810 0.18 3.80 5.66 3.72 0.1057 640 750 66.0
14.9606 20.4724 4.1732 0.12 16.4 19.2 893000 407000
145
23076YMB 380 560 135.0 4.0 422 520 5150 2590 0.22 3.08 4.58 3.01 0.1068 630 740 112
14.9606 22.0472 5.3150 0.16 16.6 20.5 1160000 581000
248
24076YMB 380 560 180.0 4.0 418 520 7150 3360 0.29 2.32 3.45 2.27 0.1062 470 530 150
14.9606 22.0472 7.0866 0.16 16.4 20.5 1610000 755000
330
23176YMB 380 620 194.0 4.0 431 566 7670 4100 0.30 2.28 3.39 2.23 0.1090 470 530 229
14.9606 24.4094 7.6378 0.16 17.0 22.3 1720000 922000
505
24176YMB 380 620 243.0 4.0 427 565 10200 5080 0.36 1.87 2.79 1.83 0.1097 300 320 287
14.9606 24.4094 9.5669 0.16 16.8 22.3 2290000 1140000
633
23276YMB 380 680 240.0 5.0 442 611 9630 5430 0.34 1.98 2.95 1.94 0.1119 370 400 376
14.9606 26.7717 9.4488 0.20 17.4 24.1 2170000 1220000
828
23980YMB 400 540 106.0 3.0 436 511 4050 1850 0.17 3.99 5.94 3.90 0.1086 600 720 69.0
15.7480 21.2598 4.1732 0.12 17.2 20.1 910000 415000
151
23080YMB 400 600 148.0 4.0 447 555 6020 3050 0.23 2.98 4.44 2.92 0.1109 590 690 146
15.7480 23.6220 5.8268 0.16 17.6 21.9 1350000 685000
321
24080YMB 400 600 200.0 4.0 442 555 8550 3990 0.30 2.24 3.33 2.19 0.1108 430 480 197
15.7480 23.6220 7.8740 0.16 17.4 21.9 1920000 898000
434
23180YMB 400 650 200.0 5.0 454 594 8210 4350 0.29 2.32 3.46 2.27 0.1123 440 500 258
15.7480 25.5906 7.8740 0.20 17.9 23.4 1850000 979000
570
24180YMB 400 650 250.0 5.0 449 594 10500 5280 0.35 1.91 2.84 1.87 0.1123 290 310 323
15.7480 25.5906 9.8425 0.20 17.7 23.4 2350000 1190000
712
23280YMB 400 720 256.0 5.0 466 646 11000 6110 0.34 1.96 2.93 1.92 0.1159 340 370 452
15.7480 28.3465 10.0787 0.20 18.4 25.4 2460000 1370000
996
22380YMB 400 820 243.0 6.0 496 729 10200 6570 0.30 2.28 3.40 2.23 0.1213 390 430 613
15.7480 32.2835 9.5669 0.24 19.5 28.7 2290000 1480000
1350
23984YMB 420 560 106.0 3.0 454 531 4270 1930 0.16 4.14 6.17 4.05 0.1117 570 670 72.0
16.5354 22.0472 4.1732 0.12 17.9 20.9 961000 434000
158
23084YMB 420 620 150.0 4.0 467 576 6430 3170 0.22 3.05 4.54 2.98 0.1139 560 650 154
16.5354 24.4094 5.9055 0.16 18.4 22.7 1450000 713000
339
24084YMB 420 620 200.0 4.0 463 575 8710 4010 0.29 2.37 3.52 2.31 0.1138 410 460 205
16.5354 24.4094 7.8740 0.16 18.2 22.7 1960000 901000
451
23184YMB 420 700 224.0 5.0 480 637 9760 5210 0.31 2.21 3.28 2.16 0.1166 410 450 346
16.5354 27.5591 8.8189 0.20 18.9 25.1 2190000 1170000
762
24184YMB 420 700 280.0 5.0 473 637 12500 6330 0.37 1.81 2.70 1.77 0.1166 260 280 432
16.5354 27.5591 11.0236 0.20 18.6 25.1 2810000 1420000
953
Y Y Y0
Caption:
Continued on next page.
TIMKEN PRODUCTS CATALOG B367
•
ROLLER BEARINGS
Caption:
Caption:
SPHERICAL ROLLER BEARINGS - continued
• Timken inventory systems are designed to provide fast delivery for frequently-ordered sizes and styles.
• Consult your Timken representative for up-to-date information about the availability of the bearings you have selected.
• Life calculations, shaft and housing ?ts, internal clearances, tolerances and other technical data for these bearings are found in the engineering section of this catalog.
• Bearings are available with a tapered bore for adapter type mounting. To order, add the suf?x “K” to bearing number (e.g., 23120K).
Caption: CJ
Caption:
A
B
Backing Diameter Load Ratings Equivalent Radial load Factors(1) Lubrication Reference Thermal
Bearing d D B R da Da Static Dynamic Dynamic Static Life Speed Ratings(3) Weight
Number Bore O.D. Width Fillet(2) Shaft Housing Load Rating Load Rating Adjustment
(max.) C0 C Factor(4)
Cg Grease Oil e
T
< – e
In All Cases X0 = 1
T
R
X = .67
> e
R
X = 1
Y Y Y0
mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. lbs. lbs. lbs.
23284YMB 420 760 272.0 6.0 490 681 12000 6670 0.35 1.90 2.83 1.86 0.1187 320 350 537
16.5354 29.9213 10.7087 0.24 19.3 26.8 2690000 1500000
1180
23988YMB 440 600 118.0 3.0 479 566 5080 2340 0.17 3.93 5.85 3.84 0.1157 530 630 97.0
17.3228 23.6220 4.6457 0.12 18.9 22.3 1140000 525000
213
23088YMB 440 650 157.0 5.0 489 603 7050 3460 0.22 3.04 4.53 2.97 0.1173 520 610 177
17.3228 25.5906 6.1811 0.20 19.3 23.8 1590000 777000
390
24088YMB 440 650 212.0 5.0 485 603 9870 4480 0.29 2.31 3.44 2.26 0.1173 380 430 239
17.3228 25.5906 8.3465 0.20 19.1 23.7 2220000 1010000
527
23188YMB 440 720 226.0 5.0 500 657 10400 5440 0.30 2.26 3.37 2.21 0.1198 380 430 361
17.3228 28.3465 8.8976 0.20 19.7 25.9 2340000 1220000
797
24188YMB 440 720 280.0 5.0 495 656 13100 6450 0.36 1.88 2.79 1.84 0.1197 250 260 448
17.3228 28.3465 11.0236 0.20 19.5 25.8 2930000 1450000
987
23288YMB 440 790 280.0 6.0 512 710 13400 7350 0.35 1.95 2.91 1.91 0.1231 300 320 593
17.3228 31.1024 11.0236 0.24 20.1 27.9 3010000 1650000
1310
23992YMB 460 620 118.0 3.0 504 582 4700 2050 0.16 4.13 6.15 4.04 0.1187 520 620 101
18.1102 24.4094 4.6457 0.12 19.9 22.9 1060000 460000
221
23092YMB 460 680 163.0 5.0 512 631 7660 3740 0.22 3.06 4.56 2.99 0.1207 500 570 202
18.1102 26.7717 6.4173 0.20 20.1 24.8 1720000 840000
444
24092YMB 460 680 218.0 5.0 507 630 10400 4750 0.28 2.37 3.53 2.32 0.1207 360 410 270
18.1102 26.7717 8.5827 0.20 20.0 24.8 2350000 1070000
593
23192YMB 460 760 240.0 6.0 524 692 11200 5920 0.30 2.24 3.33 2.19 0.1230 370 410 433
18.1102 29.9213 9.4488 0.24 20.6 27.2 2530000 1330000
953
24192YMB 460 760 300.0 6.0 517 692 15000 7420 0.37 1.82 2.71 1.78 0.1239 220 240 542
18.1102 29.9213 11.8110 0.24 20.4 27.2 3360000 1670000
1190
23292YMB 460 830 296.0 6.0 535 746 14200 7870 0.34 1.96 2.93 1.92 0.1259 280 310 697
18.1102 32.6772 11.6535 0.24 21.1 29.4 3190000 1770000
1530
23996YMB 480 650 128.0 4.0 522 614 5430 2490 0.17 3.86 5.75 3.78 0.1224 500 590 121
18.8976 25.5906 5.0394 0.16 20.6 24.2 1220000 559000
267
23096YMB 480 700 165.0 5.0 532 650 8070 3840 0.22 3.14 4.67 3.07 0.1236 470 550 211
18.8976 27.5591 6.4961 0.20 21.0 25.6 1810000 863000
465
24096YMB 480 700 218.0 5.0 527 652 11000 4970 0.28 2.45 3.64 2.39 0.1233 340 380 279
18.8976 27.5591 8.5827 0.20 20.7 25.7 2470000 1120000
614
23196YMB 480 790 248.0 6.0 547 719 12600 6480 0.30 2.26 3.36 2.21 0.1269 340 370 482
18.8976 31.1024 9.7638 0.24 21.5 28.3 2830000 1460000
1060
24196YMB 480 790 308.0 6.0 542 717 16300 7840 0.37 1.85 2.75 1.80 0.1266 210 220 598
18.8976 31.1024 12.1260 0.24 21.3 28.2 3660000 1760000
1320
23296YMB 480 870 310.0 6.0 561 779 16600 8940 0.35 1.92 2.85 1.87 0.1305 250 270 805
18.8976 34.2520 12.2047 0.24 22.1 30.7 3740000 2010000
1770
239/500YMB 500 670 128.0 4.0 544 634 5730 2540 0.17 4.02 5.98 3.93 0.1251 470 560 126
19.6850 26.3780 5.0394 0.16 21.4 25.0 1290000 571000
276
230/500YMB 500 720 167.0 5.0 551 673 8260 3950 0.21 3.26 4.85 3.18 0.1263 460 530 221
19.6850 28.3465 6.5748 0.20 21.7 26.5 1860000 889000
486
Caption:
A
(1) These factors apply for both inch and metric calculations. See engineering section for instructions on use.
(2) Maximum shaft or housing ?llet radius that bearing corners will clear.
* Available in standard shaker screen bearing design con?guration
(example: 223xxYMW33W800C4).
(3) See thermal speed ratings in the engineering section.
(4) Geometry constant for Lubrication Life Adjustment Factor a3l. See "Bearing Load Ratings and Life Calculations."
•
B368 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearings
Caption:
YM
Caption:
Caption:
Caption:
VCSJ
Caption:
Backing Diameter Load Ratings Equivalent Radial load Factors(1) Lubrication Reference Thermal
Bearing d D B R da Da Static Dynamic Dynamic Static Life Speed Ratings(3) Weight
Number Bore O.D. Width Fillet(2) Shaft Housing Load Rating Load Rating Adjustment
(max.) C0 C Factor(4)
Cg Grease Oil
A
B
A
T R
X = 1
< – e
> e In All
Cases X0 = 1
T
R
X = .67
e
mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. lbs. lbs. lbs.
240/500YMB 500 720 218.0 5.0 547 672 11300 5040 0.27 2.51 3.74 2.45 0.1263 330 370 289
19.6850 28.3465 8.5827 0.20 21.5 26.5 2540000 1130000
635
231/500YMB 500 830 264.0 6.0 573 753 14100 7180 0.30 2.22 3.30 2.17 0.1307 320 350 572
19.6850 32.6772 10.3937 0.24 22.5 29.6 3170000 1610000
1260
241/500YMB 500 830 325.0 6.0 563 755 17700 8720 0.37 1.81 2.69 1.77 0.1300 200 210 704
19.6850 32.6772 12.7953 0.24 22.2 29.7 3990000 1960000
1550
232/500YMB 500 920 336.0 6.0 585 823 18100 9910 0.36 1.90 2.83 1.86 0.1340 240 260 988
19.6850 36.2205 13.2283 0.24 23.0 32.4 4070000 2230000
2170
239/530YMB 530 710 136.0 4.0 575 672 6950 3030 0.16 4.11 6.12 4.02 0.1298 430 500 149
20.8661 27.9528 5.3543 0.16 22.6 26.4 1560000 682000
329
230/530YMB 530 780 185.0 5.0 588 725 9840 4740 0.21 3.14 4.68 3.07 0.1319 420 480 299
20.8661 30.7087 7.2835 0.20 23.2 28.5 2210000 1070000
657
240/530YMB 530 780 250.0 5.0 583 725 13900 6170 0.28 2.37 3.53 2.32 0.1318 300 330 403
20.8661 30.7087 9.8425 0.20 23.0 28.5 3110000 1390000
888
231/530YMB 530 870 272.0 6.0 603 793 15300 7770 0.30 2.27 3.38 2.22 0.1350 300 320 637
20.8661 34.2520 10.7087 0.24 23.7 31.2 3440000 1750000
1400
241/530YMB 530 870 335.0 6.0 596 792 19800 9430 0.37 1.84 2.74 1.80 0.1352 180 190 785
20.8661 34.2520 13.1890 0.24 23.5 31.2 4440000 2120000
1730
232/530YMB 530 980 355.0 7.0 621 878 20500 11200 0.35 1.91 2.85 1.87 0.1395 220 240 1190
20.8661 38.5827 13.9764 0.28 24.4 34.6 4610000 2520000
2620
239/560YMB 560 750 140.0 4.0 607 710 7370 3240 0.16 4.21 6.27 4.12 0.1339 400 470 172
22.0472 29.5276 5.5118 0.16 23.9 28.0 1660000 729000
378
230/560YMB 560 820 195.0 5.0 620 764 10900 5230 0.22 3.14 4.67 3.07 0.1364 390 450 344
22.0472 32.2835 7.6772 0.20 24.4 30.1 2460000 1180000
759
240/560YMB 560 820 258.0 5.0 617 761 15000 6500 0.28 2.42 3.60 2.37 0.1365 280 310 456
22.0472 32.2835 10.1575 0.20 24.3 30.0 3360000 1460000
1000
231/560YMB 560 920 280.0 6.0 638 838 16600 8410 0.29 2.33 3.47 2.28 0.1399 270 300 734
22.0472 36.2205 11.0236 0.24 25.1 33.0 3730000 1890000
1620
241/560YMB 560 920 355.0 6.0 629 839 22100 10600 0.36 1.87 2.78 1.83 0.1400 160 170 931
22.0472 36.2205 13.9764 0.24 24.8 33.0 4960000 2370000
2050
232/560YMB 560 1030 365.0 7.0 661 918 22600 11900 0.34 1.96 2.91 1.91 0.1449 200 220 1340
22.0472 40.5512 14.3701 0.28 26.0 36.1 5090000 2690000
2960
239/600YMB 600 800 150.0 4.0 650 757 8690 3680 0.16 4.20 6.25 4.11 0.1404 370 430 207
23.6220 31.4961 5.9055 0.16 25.6 29.8 1950000 827000
456
230/600YMB 600 870 200.0 5.0 664 811 11900 5530 0.21 3.27 4.87 3.20 0.1413 360 410 391
23.6220 34.2520 7.8740 0.20 26.1 31.9 2670000 1240000
861
240/600YMB 600 870 272.0 5.0 658 811 17000 7320 0.28 2.44 3.64 2.39 0.1421 260 280 531
23.6220 34.2520 10.7087 0.20 25.9 31.9 3820000 1650000
1170
231/600YMB 600 980 300.0 6.0 681 895 19100 9560 0.29 2.32 3.46 2.27 0.1458 250 270 887
23.6220 38.5827 11.8110 0.24 26.8 35.2 4290000 2150000
1950
239/630YMB 630 850 165.0 5.0 684 804 10200 4390 0.17 4.02 5.99 3.93 0.1451 340 400 264
24.8031 33.4646 6.4961 0.20 26.9 31.6 2290000 986000
583
Y Y Y0
Caption:
Continued on next page.
TIMKEN PRODUCTS CATALOG B369
•
ROLLER BEARINGS
Caption:
Caption:
SPHERICAL ROLLER BEARINGS - continued
• Timken inventory systems are designed to provide fast delivery for frequently-ordered sizes and styles.
• Consult your Timken representative for up-to-date information about the availability of the bearings you have selected.
• Life calculations, shaft and housing ?ts, internal clearances, tolerances and other technical data for these bearings are found in the engineering section of this catalog.
• Bearings are available with a tapered bore for adapter type mounting. To order, add the suf?x “K” to bearing number (e.g., 23120K).
Caption: CJ
Caption:
A
B
Backing Diameter Load Ratings Equivalent Radial load Factors(1) Lubrication Reference Thermal
Bearing d D B R da Da Static Dynamic Dynamic Static Life Speed Ratings(3) Weight
Number Bore O.D. Width Fillet(2) Shaft Housing Load Rating Load Rating Adjustment
(max.) C0 C Factor(4)
Cg Grease Oil e
T
< – e
In All Cases X0 = 1
T
R
X = .67
> e
R
X = 1
Y Y Y0
mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. lbs. lbs. lbs.
230/630YMB 630 920 212.0 6.0 696 858 13600 6370 0.21 3.18 4.74 3.11 0.1466 330 380 469
24.8031 36.2205 8.3465 0.24 27.4 33.8 3050000 1430000
1030
240/630YMB 630 920 290.0 6.0 691 856 18900 8180 0.28 2.41 3.59 2.36 0.1465 240 260 642
24.8031 36.2205 11.4173 0.24 27.2 33.7 4240000 1840000
1410
231/630YMB 630 1030 315.0 6.0 716 940 21500 10600 0.29 2.30 3.42 2.25 0.1505 230 250 1030
24.8031 40.5512 12.4016 0.24 28.2 37.0 4820000 2390000
2270
241/630YMB 630 1030 400.0 6.0 707 939 27900 13000 0.37 1.84 2.74 1.80 0.1504 140 140 1310
24.8031 40.5512 15.7480 0.24 27.8 37.0 6270000 2920000
2880
239/670YMB 670 900 170.0 5.0 727 851 11200 4720 0.16 4.15 6.18 4.06 0.1509 320 370 302
26.3780 35.4331 6.6929 0.20 28.6 33.5 2510000 1060000
666
230/670YMB 670 980 230.0 6.0 744 911 16000 7230 0.22 3.12 4.65 3.05 0.1531 310 350 579
26.3780 38.5827 9.0551 0.24 29.3 35.9 3590000 1630000
1280
240/670YMB 670 980 308.0 6.0 738 910 22100 9280 0.28 2.39 3.55 2.33 0.1530 220 240 775
26.3780 38.5827 12.1260 0.24 29.0 35.8 4960000 2090000
1710
231/670YMB 670 1090 336.0 6.0 760 995 23700 11600 0.29 2.31 3.44 2.26 0.1560 210 230 1220
26.3780 42.9134 13.2283 0.24 29.9 39.2 5340000 2610000
2700
241/670YMD 670 1090 412.0 6.0 751 996 30400 14100 0.36 1.90 2.82 1.85 0.1560 130 130 1500
26.3780 42.9134 16.2205 0.24 29.6 39.2 6830000 3180000
3300
232/670YMD 670 1220 438.0 9.0 779 1097 32100 16900 0.35 1.95 2.91 1.91 0.1608 160 170 2240
26.3780 48.0315 17.2441 0.35 30.7 43.2 7220000 3800000
4940
239/710YMB 710 950 180.0 5.0 771 898 12500 5150 0.16 4.13 6.15 4.04 0.1565 300 340 353
27.9528 37.4016 7.0866 0.20 30.4 35.3 2820000 1160000
778
230/710YMB 710 1030 236.0 6.0 785 960 16900 7680 0.21 3.26 4.86 3.19 0.1583 290 330 647
27.9528 40.5512 9.2913 0.24 30.9 37.8 3800000 1730000
1430
240/710YMD 710 1030 315.0 6.0 779 960 23400 9880 0.27 2.49 3.71 2.44 0.1582 200 220 863
27.9528 40.5512 12.4016 0.24 30.7 37.8 5260000 2220000
1900
231/710YMB 710 1150 345.0 7.0 809 1048 26200 12500 0.28 2.38 3.54 2.32 0.1622 200 210 1390
27.9528 45.2756 13.5827 0.28 31.8 41.3 5880000 2800000
3060
241/710YMD 710 1150 438.0 7.0 795 1050 34300 15700 0.36 1.87 2.78 1.83 0.1613 120 120 1760
27.9528 45.2756 17.2441 0.28 31.3 41.4 7720000 3520000
3890
239/750YMB 750 1000 185.0 5.0 813 946 13500 5550 0.16 4.23 6.30 4.14 0.1619 280 320 398
29.5276 39.3701 7.2835 0.20 32.0 37.3 3040000 1250000
878
230/750YMB 750 1090 250.0 6.0 830 1015 19000 8550 0.21 3.26 4.85 3.18 0.1641 270 300 770
29.5276 42.9134 9.8425 0.24 32.7 40.0 4270000 1920000
1700
240/750YMD 750 1090 335.0 6.0 824 1014 26400 11000 0.27 2.48 3.69 2.42 0.1640 190 200 1030
29.5276 42.9134 13.1890 0.24 32.4 39.9 5940000 2480000
2270
241/750YMD 750 1220 475.0 7.0 840 1114 39200 17800 0.36 1.86 2.77 1.82 0.1676 110 110 2170
29.5276 48.0315 18.7008 0.28 33.1 43.9 8800000 4000000
4770
239/800YMB 800 1060 195.0 5.0 868 1007 13800 5700 0.16 4.20 6.25 4.10 0.1685 270 310 465
31.4961 41.7323 7.6772 0.20 34.2 39.6 3100000 1280000
1020
230/800YMB 800 1150 258.0 6.0 888 1074 20300 8940 0.19 3.50 5.22 3.43 0.1696 250 280 868
31.4961 45.2756 10.1575 0.24 35.0 42.3 4570000 2010000
1910
Caption:
A
(1) These factors apply for both inch and metric calculations. See engineering section for instructions on use.
(2) Maximum shaft or housing ?llet radius that bearing corners will clear.
* Available in standard shaker screen bearing design con?guration
(example: 223xxYMW33W800C4).
(3) See thermal speed ratings in the engineering section.
(4) Geometry constant for Lubrication Life Adjustment Factor a3l. See "Bearing Load Ratings and Life Calculations."
•
B370 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearings
Caption:
YM
Caption:
Caption:
VCSJ
Caption:
Backing Diameter Load Ratings Equivalent Radial load Factors(1) Lubrication Reference Thermal
Bearing d D B R da Da Static Dynamic Dynamic Static Life Speed Ratings(3) Weight
Number Bore O.D. Width Fillet(2) Shaft Housing Load Rating Load Rating Adjustment
(max.) C0 C Factor(4)
Cg Grease Oil
A
B
A
T R
X = 1
< – e
T
R
X = .67
> e In All
Cases X0 = 1
e
mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. lbs. lbs. lbs.
240/800YMD 800 1150 345.0 6.0 877 1072 28900 11800 0.26 2.55 3.80 2.50 0.1790 170 190 1160
31.4961 45.2756 13.5827 0.24 34.5 42.2 6500000 2650000
2560
231/800YMB 800 1280 365.0 7.0 906 1171 31900 15000 0.28 2.45 3.65 2.40 0.1741 160 180 1800
31.4961 50.3937 14.3701 0.28 35.7 46.1 7170000 3380000
3950
241/800YMD 800 1280 475.0 7.0 896 1170 41900 18500 0.35 1.95 2.90 1.90 0.1740 97 100 2340
31.4961 50.3937 18.7008 0.28 35.3 46.1 9430000 4170000
5150
232/800YMD 800 1420 488.0 11.0 935 1272 44000 21500 0.33 2.04 3.03 1.99 0.1798 120 130 3310
31.4961 55.9055 19.2126 0.43 36.8 50.1 9900000 4830000
7290
238/850YMB 850 1030 136.0 4.0 900 993 10500 3650 0.11 6.23 9.27 6.09 0.1718 130 150 233
33.4646 40.5512 5.3543 0.16 35.4 39.1 2350000 822000
513
239/850YMB 850 1120 200.0 5.0 919 1050 14700 5720 0.15 4.54 6.76 4.44 0.1747 250 290 525
33.4646 44.0945 7.8740 0.20 36.2 41.4 3300000 1290000
1150
230/850YMB 850 1220 272.0 6.0 938 1138 23400 10200 0.20 3.37 5.02 3.30 0.1771 230 260 1030
33.4646 48.0315 10.7087 0.24 36.9 44.8 5250000 2290000
2260
240/850YMD 850 1220 365.0 6.0 931 1138 32600 13200 0.26 2.56 3.81 2.50 0.1770 160 170 1380
33.4646 48.0315 14.3701 0.24 36.7 44.8 7320000 2960000
3030
231/850YMB 850 1360 400.0 9.0 962 1245 36200 16900 0.28 2.44 3.63 2.39 0.1810 150 160 2220
33.4646 53.5433 15.7480 0.35 37.9 49.0 8140000 3800000
4890
232/850YMD 850 1500 515.0 11.0 990 1347 48400 23500 0.33 2.06 3.06 2.01 0.1864 110 120 3880
33.4646 59.0551 20.2756 0.43 39.0 53.0 10900000 5280000
8540
239/900YMB 900 1180 206.0 5.0 965 1112 18300 7120 0.14 4.69 6.98 4.58 0.1801 220 250 592
35.4331 46.4567 8.1102 0.20 38.0 43.8 4110000 1600000
1300
230/900YMB 900 1280 280.0 6.0 990 1198 25900 11100 0.20 3.41 5.08 3.33 0.1828 210 240 1140
35.4331 50.3937 11.0236 0.24 39.0 47.2 5820000 2500000
2520
240/900YMD 900 1280 375.0 6.0 983 1197 35600 14200 0.26 2.60 3.87 2.54 0.1827 150 160 1530
35.4331 50.3937 14.7638 0.24 38.7 47.1 7990000 3200000
3370
231/900YMB 900 1420 412.0 9.0 1018 1300 39400 17800 0.27 2.49 3.71 2.43 0.1871 140 150 2450
35.4331 55.9055 16.2205 0.35 40.1 51.2 8860000 4010000
5390
241/900YMD 900 1420 515.0 9.0 1008 1298 51000 21700 0.34 2.00 2.98 1.96 0.1869 82 85 3060
35.4331 55.9055 20.2756 0.35 39.7 51.1 11500000 4870000
6740
232/900YMD 900 1580 515.0 11.0 1056 1423 51400 24700 0.32 2.11 3.13 2.06 0.1926 100 110 4280
35.4331 62.2047 20.2756 0.43 41.6 56.0 11600000 5560000
9420
239/950YMB 950 1250 224.0 6.0 1025 1187 20700 8160 0.15 4.39 6.54 4.29 0.1874 210 240 729
37.4016 49.2126 8.8189 0.24 40.3 46.7 4660000 1830000
1600
230/950YMB 950 1360 300.0 6.0 1046 1273 27600 12100 0.19 3.49 5.19 3.41 0.1899 200 230 1400
37.4016 53.5433 11.8110 0.24 41.2 50.1 6190000 2720000
3080
240/950YMD 950 1360 412.0 6.0 1039 1269 41300 16400 0.27 2.53 3.77 2.47 0.1898 130 140 1920
37.4016 53.5433 16.2205 0.24 40.9 50.0 9290000 3680000
4230
231/950YMB 950 1500 438.0 9.0 1074 1373 44400 19900 0.27 2.47 3.68 2.42 0.1937 130 140 2910
37.4016 59.0551 17.2441 0.35 42.3 54.1 9980000 4460000
6400
241/950YMD 950 1500 545.0 9.0 1064 1371 57100 24100 0.34 2.00 2.97 1.95 0.1935 75 77 3620
37.4016 59.0551 21.4567 0.35 41.9 54.0 12800000 5410000
7970
Y Y Y0
Caption:
Continued on next page.
TIMKEN PRODUCTS CATALOG B371
•
Caption:
ROLLER BEARINGS
SPHERICAL ROLLER BEARINGS - continued
• Timken inventory systems are designed to provide fast delivery for frequently-ordered sizes and styles.
• Consult your Timken representative for up-to-date information about the availability of the bearings you have selected.
• Life calculations, shaft and housing ?ts, internal clearances, tolerances and other technical data for these bearings are found in the engineering section of this catalog.
• Bearings are available with a tapered bore for adapter type mounting.
• To order, add the suf?x “K” to bearing number (e.g., 23120K).
Caption:
Caption:
Caption: YM
Caption:
A
B
Backing Diameter Load Ratings Equivalent Radial load Factors(1) Lubrication Reference Thermal
Bearing d D B R da Da Static Dynamic Dynamic Static Life Speed Ratings(3) Weight
Number Bore O.D. Width Fillet(2) Shaft Housing Load Rating Load Rating Adjustment
(max.) C0 C Factor(4)
Cg Grease Oil e
T
< – e
T
R
X = .67
> e
R
X = 1
In All Cases X0 = 1
Y Y Y0
mm mm mm mm mm mm kN kN RPM RPM kg in. in. in. in. in. in. lbs. lbs. lbs.
239/1000YMB 1000 1320 236.0 6.0 1080 1252 23100 9020 0.15 4.39 6.54 4.29 0.1939 190 220 864
39.3701 51.9685 9.2913 0.24 42.5 49.3 5190000 2030000
1900
230/1000YMB 1000 1420 308.0 6.0 1101 1327 32100 13400 0.20 3.44 5.12 3.36 0.1960 180 200 1540
39.3701 55.9055 12.1260 0.24 43.4 52.2 7220000 3010000
3400
240/1000YMD 1000 1420 412.0 6.0 1094 1329 41800 16600 0.25 2.69 4.01 2.63 0.1952 130 140 2070
39.3701 55.9055 16.2205 0.24 43.1 52.3 9390000 3730000
4540
231/1000YMB 1000 1580 462.0 9.0 1131 1446 49500 22000 0.27 2.47 3.68 2.42 0.2002 120 130 3410
39.3701 62.2047 18.1890 0.35 44.5 56.9 11100000 4940000
7500
241/1000YMB 1000 1580 580.0 9.0 1120 1444 64400 26800 0.34 1.98 2.95 1.93 0.2000 69 71 4280
39.3701 62.2047 22.8346 0.35 44.1 56.9 14500000 6030000
9420
239/1060YMB 1060 1400 250.0 6.0 1145 1328 26500 10200 0.16 4.25 6.32 4.15 0.2004 180 200 1030
41.7323 55.1181 9.8425 0.24 45.1 52.3 5950000 2300000
2270
230/1060YMB 1060 1500 325.0 7.0 1165 1404 35800 14800 0.20 3.44 5.12 3.36 0.2031 170 190 1810
41.7323 59.0551 12.7953 0.28 45.9 55.3 8050000 3330000
3970
240/1060YMD 1060 1500 438.0 7.0 1157 1403 49500 19000 0.26 2.61 3.88 2.55 0.2030 110 120 2430
41.7323 59.0551 17.2441 0.28 45.6 55.2 11100000 4280000
5350
231/1060YMB 1060 1660 475.0 11.0 1194 1524 53500 23700 0.27 2.53 3.77 2.48 0.2070 110 120 3820
41.7323 65.3543 18.7008 0.43 47.0 60.0 12000000 5330000
8410
239/1120YMB 1120 1460 250.0 6.0 1205 1389 27100 10400 0.15 4.62 6.87 4.51 0.2077 170 190 1080
44.0945 57.4803 9.8425 0.24 47.4 54.7 6090000 2330000
2380
230/1120YMB 1120 1580 345.0 7.0 1229 1480 40200 16500 0.20 3.42 5.09 3.34 0.2101 160 170 2110
44.0945 62.2047 13.5827 0.28 48.4 58.3 9040000 3710000
4650
240/1120YMD 1120 1580 462.0 7.0 1220 1480 55600 21200 0.26 2.62 3.90 2.56 0.2100 110 110 2830
44.0945 62.2047 18.1890 0.28 48.1 58.3 12500000 4760000
6230
231/1120YMB 1120 1750 475.0 11.0 1262 1609 56100 25000 0.25 2.67 3.98 2.62 0.2142 110 110 4240
44.0945 68.8976 18.7008 0.43 49.7 63.3 12600000 5620000
9320
239/1180YMB 1180 1540 272.0 6.0 1269 1465 31500 11900 0.15 4.48 6.67 4.38 0.2148 160 180 1310
46.4567 60.6299 10.7087 0.24 50.0 57.7 7090000 2670000
2890
230/1180YMB 1180 1660 355.0 7.0 1293 1557 43500 17800 0.19 3.50 5.21 3.42 0.2170 150 160 2390
46.4567 65.3543 13.9764 0.28 50.9 61.3 9780000 4000000
5250
240/1180YMD 1180 1660 475.0 7.0 1284 1557 59800 22700 0.25 2.67 3.98 2.61 0.2169 98 110 3190
46.4567 65.3543 18.7008 0.28 50.6 61.3 13400000 5110000
7030
231/1180YMB 1180 1850 500.0 11.0 1332 1698 62400 27600 0.25 2.68 4.00 2.62 0.2217 97 100 5010
46.4567 72.8346 19.6850 0.43 52.5 66.9 14000000 6200000
11000
239/1250YMB 1250 1630 280.0 6.0 1345 1551 34200 12800 0.15 4.60 6.85 4.50 0.2227 140 160 1510
49.2126 64.1732 11.0236 0.24 52.9 61.1 7680000 2890000
3330
230/1250YMB 1250 1750 375.0 7.0 1370 1640 48800 19400 0.19 3.50 5.21 3.42 0.2250 140 150 2770
49.2126 68.8976 14.7638 0.28 54.0 64.6 11000000 4350000
6100
240/1250YMD 1250 1750 500.0 7.0 1362 1639 66700 24600 0.25 2.68 3.99 2.62 0.2249 90 96 3700
49.2126 68.8976 19.6850 0.28 53.6 64.5 15000000 5530000
8140
231/1250YMB 1250 1950 530.0 11.0 1407 1794 70000 30700 0.25 2.67 3.98 2.62 0.2296 89 95 5860
49.2126 76.7717 20.8661 0.43 55.4 70.6 15700000 6900000
12900
Caption:
Caption:
A
(1) These factors apply for both inch and metric calculations. See engineering section for instructions on use.
(2) Maximum shaft or housing ?llet radius that bearing corners will clear.
* Available in standard shaker screen bearing design con?guration
(example: 223xxYMW33W800C4).
(3) See thermal speed ratings in the engineering section.
(4) Geometry constant for Lubrication Life Adjustment Factor a3l. See "Bearing Load Ratings and Life Calculations."
•
B372 TIMKEN PRODUCTS CATALOG
SNW/SNP – PULL TYPE SLEEVE, LOCKNUT, LOCKWASHER/LOCKPLATE ASSEMBLIES
Spherical Roller Bearings
SHAFT ADAPTER ACCESSORIES FOR TAPERED BORE BEARINGS SNW/SNP – PULL TYPE SLEEVE, LOCKNUT,
LOCKWASHER/LOCKPLATE ASSEMBLIES
• The table below shows dimensions for adapter assemblies and components used in the mounting of tapered bore bearings on shafts.
• SNW assembly consists of a sleeve, locknut and lockwasher.
• SNP assembly consists of a sleeve, locknut and lockplate.
S
D1
Tapered bore bearing plus SNW
d
A
B
B2
Tapered bore bearing plus SNW
Bearing
Accessory Numbers Shaft Dimensions
Adapter Dimensions Inches
Number
Inches
SNW/SNP
Assembly Sleeve Locknut Lockwasher
B2
S D1 Assembly
Lockplate Diameter Tolerance
Weight
d +.000
in. in.
in. in. lbs.
FOR SERIES 222K
22209K SNW-09 S-09 N-09 W-09 1 7/16 -.003 1 37/64
1/2
2 17/32 0.6
22210K SNW-10 S-10 N-10 W-10 1 11/16 -.003 1 49/64
9/16
2 11/16 0.7
22211K SNW-11 S-11 N-11 W-11 1 15/16 -.003 1 27/32
9/16
2 31/32 0.8
22212K SNW-12 S-12 N-12 W-12 2 1/16 -.004 1 63/64
19/32
3 5/32 1.1
22213K SNW-13 S-13 N-13 W-13 2 3/16 -.004 2 3/32
5/8
3 3/8
1.4
22214K SNW-14 S-14 N-14 W-14 2 5/16 -.004 2 11/64
5/8
3 5/8
1.8
22215K SNW-15 S-15 AN-15 W-15 2 7/16 -.004 2 19/64
43/64
3 7/8
2
22216K SNW-16 S-16 AN-16 W-16 2 11/16 -.004 2 3/8
43/64
4 5/32 2.4
22217K SNW-17 S-17 AN-17 W-17 2 15/16 -.004 2 31/64
45/64
4 13/32 3
Caption:
22218K SNW-18 S-18 AN-18 W-18 3 3/16 -.004 2 41/64
25/32
4 21/32 3
A
22219K SNW-19 S-19 AN-19 W-19 3 5/16 -.004 2 49/64
13/16
4 15/16 3.3
22220K SNW-20 S-20 AN-20 W-20 3 7/16 -.004 2 7/8
27/32
5 3/16 4.4
22222K SNW-22 S-22 AN-22 W-22 3 15/16 -.004 3 13/64
29/32
5 23/32 5
22224K SNW-24 S-24 AN-24 W-24 4 3/16 -.005 3 15/32
15/16
6 1/8
6.7
22226K SNW-26 S-26 AN-26 W-26 4
/16 -.005 3
/64
1
6
/4
8.6
22228K SNW-28 S-28 AN-28 W-28 4 15/16 -.005 3 63/64 1 1/16
7 3/32 10.3
22230K SNW-30 S-30 AN-30 W-30 5 3/16 -.005 4 15/64 1 1/8
7 11/16 13.5
22232K SNW-32 S-32 AN-32 W-32 5 7/16 -.005 4 37/64 1 3/16
8 1/16 15.6
22234K SNW-34 S-34 AN-34 W-34 5 15/16 -.005 4 27/32 1 7/32
8 21/32 19.4
7
1
1
1
7
49
3
22236K SNW-36 S-36 AN-36 W-36 6
/16 -.005 5
/32
1
/4
9
/16 20.5
22238K SNW-38 S-38 AN-38 W-38 6 15/16 -.005 5 17/64 1 9/32
9 15/32 23.4
22240K SNW-40 S-40 AN-40 W-40 7 3/16 -.005 5 31/64 1 11/32 9 27/32 30.5
22244K SNW-44 S-44 AN-44 W-44 7
/16 -.005 5
/32
1
/8
11
33
FOR SERIES 230K
15
29
3
23024K SNW-3024 S-3024 N-024 W-024 4 3/16 -.005 2 61/64
13/16
5 11/16 6.1
23026K SNW-3026 S-3026 N-026 W-026 4 7/16 -.005 3 15/64
7/8
6 1/8
7.5
23028K SNW-3028 S-3028 N-028 W-028 4 15/16 -.005 3 11/32
15/16
6 1/2
8.4
23030K SNW-3030 S-3030 N-030 W-030 5 3/16 -.005 3 31/64
31/32
7 1/8
9.8
23032K SNW-3032 S-3032 N-032 W-032 5
/16 -.005 3
/32
1
/32
7
/2 11.8
23034K SNW-3034 S-3034 N-034 W-034 5 15/16 -.005 4 1/64 1 1/16
7 7/8 13.3
23036K SNW-3036 S-3036 N-036 W-036 6 7/16 -.005 4 11/32 1 3/32
8 1/4 15.2
23038K SNW-3038 S-3038 N-038 W-038 6 15/16 -.005 4 13/32 1 1/8
8 11/16 16.7
23040K SNW-3040 S-3040 N-040 W-040 7 3/16 -.005 4 3/4 1 3/16
9 7/16 19.7
15
1
1
1
7
23
1
1
23044K SNW-3044 S-3044 N-044 W-044 7
/16 -.005 5
/8
1
/4
10
/4 24.4
23048K SNP-3048 S-3048 N-048 P-048 8 15/16 -.006 5 7/16 1 11/32 11 7/16 32.2
23052K SNP-3052 S-3052 N-052 P-052 9 7/16 -.006 6 1/64 1 13/32 12 3/16 41.1
23056K SNP-3056 S-3056 N-056 P-056 10 7/16 -.007 6 3/16 1 1/2
13
45.4
23060K SNP-3060 S-3060 N-060 P-060 10 15/16 -.007 6 47/64 1 9/16
14 3/16 58.9
23064K SNP-3064 S-3064 N-064 P-064 11 15/16 -.007 6 61/64 1 21/32 15
65.7
23068K SNP-3068 S-3068 N-068 P-068 12 7/16 -.008 7 35/64 1 25/32 15 3/4 77.8
23072K SNP-3072 S-3072 N-072 P-072 13 7/16 -.008 7 37/64 1 25/32 16 1/2 86.2
23076K SNP-3076 S-3076 N-076 P-076 13 15/16 -.008 7 3/4 1 57/64 17 3/4 94.3
13
1
1
23080K SNP-3080 S-3080 N-080 P-080 15 -.008 8
/32
2
/16
18
/2 105
TIMKEN PRODUCTS CATALOG B373
•
SNW/SNP – PULL TYPE SLEEVE, LOCKNUT, LOCKWASHER/LOCKPLATE ASSEMBLIES
Caption:
ROLLER BEARINGS
S
SHAFT ADAPTER ACCESSORIES FOR TAPERED BORE BEARINGS SNW/SNP – PULL TYPE SLEEVE, LOCKNUT,
LOCKWASHER/LOCKPLATE ASSEMBLIES
• The table below shows dimensions for adapter assemblies and components used in the mounting of tapered bore bearings on shafts.
• SNW assembly consists of a sleeve, locknut and lockwasher.
• SNP assembly consists of a sleeve, locknut and lockplate.
A
B
D1
Tapered bore bearing plus SNW
d
B2
Tapered bore bearing plus SNW
Adapter Dimensions Inches
Bearing
Accessory Numbers
Shaft Dimensions
Number
Inches
SNW/SNP
Assembly Sleeve Locknut Lockwasher
B2
S D1 Assembly
Lockplate Diameter Tolerance
Weight
d +.000
in. in.
in. in. lbs.
FOR SERIES 223K and 232K
22308K SNW-108 S-108 N-08 W-08 1 5/16 -.003 2 1/64
1/2
2 1/4
0.8
22309K SNW-109 S-109 N-09 W-09 1 7/16 -.003 2 9/64
1/2
2 17/32 0.8
22310K SNW-110 S-110 N-10 W-10 1 11/16 -.003 2 25/64 9/16 2 11/16 0.9
22311K SNW-111 S-111 N-11 W-11 1 15/16 -.003 2 33/64 9/16 2 31/32 0.9
22312K SNW-112 S-112 N-12 W-12 2 1/16 -.004 2 21/32 19/32 3 5/32 1.2
22313K SNW-113 S-113 N-13 W-13 2 3/16 -.004 2 49/64 5/8 3 3/8
1.7
22314K SNW-114 S-114 N-14 W-14 2 5/16 -.004 2 61/64 5/8 3 5/8
2.3
22315K SNW-115 S-115 AN-15 W-15 2 7/16 -.004 3 5/64
43/64
3 7/8
3
22316K SNW-116 S-116 AN-16 W-16 2 11/16 -.004 3 13/64 43/64 4 5/32 3.2
22317K SNW-117 S-117 AN-17 W-17 2 15/16 -.004 3 5/16
45/64
4 13/32 3.5
22318K SNW-118 S-118 AN-18 W-18 3 3/16 -.004 3 35/64 25/32 4 21/32 4
Caption:
A
22319K SNW-119 S-119 AN-19 W-19 3 5/16 -.004 3 45/64 13/16 4 15/16 5
22320K 23220K SNW-120 S-120 AN-20 W-20 3 7/16 -.004 3 31/32 27/32 5 3/16 6.2
22322K 23222K SNW-122 S-122 AN-22 W-22 3 15/16 -.004 4 11/32 29/32 5 23/32 6.5
22324K 23224K SNW-124 S-124 AN-24 W-24 4 3/16 -.005 4 41/64 15/16 6 1/8
8
22326K 23226K SNW-126 S-126 AN-26 W-26 4 7/16 -.005 4 63/64 1 6 3/4 12.4
22328K 23228K SNW-128 S-128 AN-28 W-28 4 15/16 -.005 5 21/64 1 1/16 7 3/32 13
22330K 23230K SNW-130 S-130 AN-30 W-30 5 3/16 -.005 5 5/8 1 1/8
7 11/16 17.6
22332K 23232K SNW-132 S-132 AN-32 W-32 5 7/16 -.005 5 59/64 1 3/16 8 1/16 18.5
22334K 23234K SNW-134 S-134 AN-34 W-34 5 15/16 -.005 6 3/16 1 7/32
8 21/32 21
22336K 23236K SNW-136 S-136 AN-36 W-36 6 7/16 -.005 6 29/64 1 1/4 9 1/16 22.5
22338K 23238K SNW-138 S-138 AN-38 W-38 6 15/16 -.005 6 3/4 1 9/32
9 15/32 28
22340K 23240K SNW-140 S-140 AN-40 W-40 7 3/16 -.005 7 3/32 1 11/32 9 27/32 36
22344K 23244K SNW-144 S-144 AN-44 W-44 7 15/16 -.005 7 9/32 1 3/8
11
47
1 11/32 11 7/16 38.3
22352K 23252K SNP-152 S-152 N-052 P-52 9 7/16 -.006 8 49/64 1 13/32 12 13/16 53.4 22356K 23256K SNP-3256 S-3256 N-056 P-56 10 7/16 -.007 8 15/16 1 1/2 13
22348K 23248K SNP-148 S-148 N-048 P-48 8 15/16 -.006 8 7/64
61.3
FOR SERIES 231K
23122K SNW-3122 S-22 N-022 W-022 3 15/16 -.004 3 13/64 25/32 5 5/32 4.2
23124K SNW-3124 S-24 N-024 W-024 4 3/16 -.005 3 15/32 13/16 5 11/16 5.8
23126K SNW-3126 S-26 N-026 W-026 4 7/16 -.005 3 49/64 7/8 6 1/8 8.3
23128K SNW-3128 S-28 N-028 W-028 4 15/16 -.005 3 63/64 15/16 6 1/2 8.8
23130K SNW-3130 S-30 N-030 W-030 5 3/16 -.005 4 15/64 31/32
7 1/8 13.7
23132K SNW-3132 S-32 N-032 W-032 5 7/16 -.005 4 37/64 1 1/32 7 1/2 13.3
23134K SNW-3134 S-34 N-034 W-034 5 15/16 -.005 4 27/32 1 1/16 7 7/8 16.1
23136K SNW-3136 S-36 N-036 W-036 6 7/16 -.005 5 1/32 1 3/32
8 1/4 17.1
23138K SNW-3138 S-38 N-038 W-038 6 15/16 -.005 5 17/64 1 1/8 8 11/16 19.7
23140K SNW-3140 S-40 N-040 W-040 7 3/16 -.005 5 31/64 1 3/16 9 7/16 28.4
23144K SNW-3144 S-44 N-044 W-044 7 15/16 -.005 5 29/32 1 1/4 10 1/4 28.1
23148K SNP-3148 S-48 N-048 P-48 8 15/16 -.006 6 41/64 1 11/32 11 7/16 36
23152K SNP-3152 S-52 N-052 P-052 9 7/16 -.006 7 19/32 1 13/32 12 3/16 39
23156K SNP-3156 S-3156 N-056 P-56 10 7/16 -.007 7 49/64 1 1/2 13
60
23160K SNP-3160 S-3160 N-060 P-060 10 15/16 -.007 8 3/8 1 9/16
14 3/16 65
23164K SNP-3164 S-3164 N-064 P-064 11 15/16 -.007 9 7/64 1 21/32
15
70
•
B374 TIMKEN PRODUCTS CATALOG
LOCKNUT, AND LOCKWASHER
Spherical Roller Bearings
SHAFT ADAPTER ACCESSORIES FOR TAPERED BORE BEARINGS PUSH TYPE REMOVABLE SLEEVE LOCKNUT AND LOCKWASHER
a
C
d
• The table below shows dimensions for adapter assemblies and components used in the mounting of tapered bore bearings on shafts.
B
A
B
L
REMOVAL NUT
Tapered bore bearing mounted with push type removable sleeve
Tapered bore bearing mounted with push type removable sleeve
Bearing
Accessory Numbers
Shaft Dimensions
Sleeve Dimensions
Number
Sleeve
C Weight
Lockplate Nut Diameter Tolerance Pitch Dia. Removal Nut d +.000
O.D.
Sleeve Locknut Lockwasher Removal B
L a
mm mm mm mm mm mm kg. in. in. in. in. in. in. lbs.
SERIES 222K
22216K SK-8022 N-14 W-14 AN-18 70 -.10 88.19 50 3.5 118.39 0.57
2.7559 -.004 3.472 1.969 0.138 4.661 1.25 22217K SK-8522 AN-15 W-15 AN-19 75 -.10 93.35 52 3.5 125.55 0.65
2.9528 -.004 3.675 2.047 0.138 4.943 1.44 22218K SK-9022 AN-16 W-16 AN-20 80 -.10 98.12 53 3.5 131.90 0.69
3.1496 -.004 3.863 2.087 0.138 5.193 1.53 22219K SK-9522 AN-17 W-17 AN-21 85 -.10 103.28 57 4.0 138.25 0.82
3.3465 -.004 4.066 2.244 0.157 5.443 1.81 22220K SK-10022 AN-18 W-18 AN-22 90 -.10 109.12 59 4.0 145.39 0.91
3.5433 -.004 4.269 2.323 0.157 5.724 2.00
Caption:
A
22222K SK-11022 AN-20 W-20 ARN-22 100 -.10 119.94 65 4.0 158.75 1.12
3.9370 -.004 4.722 2.559 0.157 6.250 2.47 22224K SK-12022 AN-22 W-22 ARN-24 110 -.13 130.28 72 4.0 174.63 1.42
4.3307 -.005 5.129 2.835 0.157 6.875 3.13 22226K SK-13022 AN-22 W-22 ARN-26 115 -.13 141.38 78 4.0 184.15 2.27
4.5276 -.005 5.566 3.071 0.157 7.250 5.00 22228K SK-14022 AN-24 W-24 RN-28 125 -.13 152.73 82 5.0 200.03 2.67
4.9213 -.005 6.013 3.228 0.197 7.875 5.88 22230K SK-15022 AN-26 W-26 RN-30 135 -.13 163.04 88 5.0 209.55 3.09
5.3150 -.005 6.419 3.465 0.197 8.250 6.81
22232K SK-16022 AN-28 W-28 RN-32 140 -.13 173.76 96 5.0 225.43 4.51
5.5118 -.005 6.841 3.780 0.197 8.875 9.94 22234K SK-17022 AN-30 W-30 RN-34 150 -.13 184.07 104 5.0 234.95 5.22
5.9055 -.005 7.247 4.095 0.197 9.250 11.50 22236K SK-18022 AN-32 W-32 RN-36 160 -.13 194.79 104 5.0 247.65 5.67
6.2992 -.005 7.669 4.095 0.197 9.750 12.50 22238K SK-19022 AN-34 W-34 RN-38 170 -.13 205.92 112 5.0 269.88 6.58
6.6929 -.005 8.107 4.409 0.197 10.625 14.50 22240K SK-20022 AN-36 W-36 N-44 180 -.13 217.02 118 5.0 279.53 7.43
7.0866 -.005 8.544 4.646 0.197 11.005 16.37
22244K SK-22022 AN-40 W-40 N-048 200 -.13 236.98 130 6.0 290.65 8.89
7.8740 -.005 9.330 5.118 0.236 11.443 19.60 22248K SK-24022 N-44 W-44 N-052 220 -.15 256.03 144 6.0 309.70 11.02
8.6614 -.006 10.080 5.669 0.236 12.193 24.30 22252K SK-26022 N-048 P-48 N-056 240 -.15 276.66 155 6.0 330.33 14.02
9.4488 -.006 10.892 6.102 0.236 13.005 30.90
22256K SK-28022 N-052 P-52 RN-56 260 -.15 301.27 155 8.0 425.45 15.01
10.2362 -.006 11.861 6.102 0.315 16.75 33.10
22260K SK-30022 N-056 P-56 RN-60 280 -.15 325.88 170 8.0 416.10 17.78
11.0236 -.006 12.830 6.693 0.315 16.382 39.20
22264K SK-32022 N-060 P-60 RN-64 300 -.15 345.72 180 10.0 431.80 21.00
11.8110 -.006 13.611 7.087 0.394 17.000 46.30
TIMKEN PRODUCTS CATALOG B375
•
LOCKNUT, AND LOCKWASHER
ROLLER BEARINGS
Caption:
SHAFT ADAPTER ACCESSORIES FOR TAPERED BORE BEARINGS PUSH TYPE REMOVABLE SLEEVE, LOCKNUT AND LOCKWASHER
a
C
d
B
L
A
• The table below shows dimensions for adapter assemblies and components used in the mounting of tapered bore bearings on shafts.
B
REMOVAL NUT
Tapered bore bearing mounted with push type removable sleeve
Tapered bore bearing mounted with push type removable sleeve
Bearing
Accessory Numbers
Dimensions
Sleeve Dimensions
Number
Shaft
Sleeve
Sleeve Locknut Lockwasher Removal B
L a
C Weight
Lockplate Nut Diameter Tolerance Pitch Dia. Removal Nut d +.000
O.D.
mm mm mm mm mm mm kg. in. in. in. in. in. in. lbs.
SERIES 223K
22308K SK-4023 N-07 W-07 N-09 35 -.08 43.94 40 3.0 64.41 0.11
1.3780 -.003 1.730 1.575 0.118 2.536 0.25
22309K SK-4523 N-08 W-08 N-10 40 -.08 49.02 44 3.0 68.40 0.14
1.5748 -.003 1.930 1.732 0.118 2.693 0.31
22310K SK-5023 N-09 W-09 RN-10 45 -.08 55.04 50 3.0 76.20 0.21
1.7717 -.003 2.167 1.969 0.118 3.000 0.47
22311K SK-5523 N-10 W-10 RN-11 50 -.08 60.20 54 3.0 81.76 0.25
1.9685 -.003 2.370 2.126 0.118 3.219 0.56
22312K SK-6023 N-11 W-11 RN-12 55 -.10 65.76 57 3.5 87.33 0.31
2.1654 -.004 2.589 2.244 0.138 3.438 0.69
A
22313K SK-6523 N-12 W-12 AN-15 60 -.10 73.10 61 3.5 98.55 0.38
2.3622 -.004 2.878 2.402 0.138 3.880 0.84 22314K SK-7023 N-12 W-12 AN-16 60 -.10 78.28 65 3.5 105.69 0.69
2.3622 -.004 3.082 2.559 0.138 4.161 1.53 22315K SK-7523 N-13 W-13 AN-17 65 -.10 83.44 69 3.5 112.04 0.81
2.5591 -.004 3.285 2.717 0.138 4.411 1.78 22316K SK-8023 N-14 W-14 AN-18 70 -.10 88.19 72 3.5 118.39 0.91
2.7559 -.004 3.472 2.835 0.138 4.661 2.00 22317K SK-8523 AN-15 W-15 AN-19 75 -.10 93.35 75 3.5 125.55 1.02
2.9528 -.004 3.675 2.953 0.138 4.943 2.25
Caption:
22318K SK-9023 AN-16 W-16 AN-20 80 -.10 98.12 80 3.5 131.90 1.16
3.1496 -.004 3.863 3.150 0.138 5.193 2.56 22319K SK-9523 AN-17 W-17 AN-21 85 -.10 103.28 85 4.0 138.25 1.33
3.3465 -.004 4.066 3.346 0.157 5.443 2.94 22320K SK-10023 AN-18 W-18 AN-22 90 -.10 109.12 90 4.0 145.39 1.53
3.5433 -.004 4.269 3.543 0.157 5.724 3.38 22322K SK-11023 AN-20 W-20 ARN-22 100 -.10 119.94 98 4.0 158.75 1.93
3.9370 -.004 4.722 3.858 0.157 6.250 4.25 22324K SK-12023 AN-22 W-22 ARN-24 110 -.13 130.28 105 4.0 174.63 2.27
4.3307 -.005 5.129 4.134 0.157 6.875 5.00
22326K SK-13023 AN-22 W-22 ARN-26 115 -.13 141.38 115 4.0 184.15 3.63
4.5276 -.005 5.566 4.528 0.157 7.250 8.00 22328K SK-14023 AN-24 W-24 RN-28 125 -.13 152.73 125 5.0 200.03 4.31
4.9213 -.005 6.013 4.921 0.197 7.875 9.50 22330K SK-15023 AN-26 W-26 RN-30 135 -.13 163.04 135 5.0 209.55 5.18
5.3150 -.005 6.419 5.315 0.197 8.250 11.43 22332K SK-16023 AN-28 W-28 RN-32 140 -.13 173.76 140 6.0 225.43 7.03
5.5118 -.005 6.841 5.512 0.236 8.875 15.50 22334K SK-17023 AN-30 W-30 RN-34 150 -.13 184.07 146 6.0 234.95 7.82
5.9055 -.005 7.247 5.748 0.236 9.250 17.25
22336K SK-18023 AN-32 W-32 RN-36 160 -.13 194.79 154 6.0 247.65 9.19
6.2992 -.005 7.669 6.063 0.236 9.750 20.25 22338K SK-19023 AN-34 W-34 RN-38 170 -.13 205.92 160 7.0 269.88 10.03
6.6929 -.005 8.107 6.299 0.276 10.625 22.12 22340K SK-20023 AN-36 W-36 N-44 180 -.13 217.02 170 7.0 279.53 11.45
7.0866 -.005 8.544 6.693 0.276 11.005 25.25 22344K SK-22023 AN-40 W-40 N-048 200 -.13 236.98 181 8.0 290.65 13.38
7.8740 -.005 9.330 7.126 0.315 11.443 29.50 22348K SK-24023 N-44 W-44 N-052 220 -.15 256.03 189 8.0 309.70 15.51
8.6614 -.006 10.080 7.441 0.315 12.193 34.20
22352K SK-26023 N-048 P-48 N-056 240 -.15 276.66 200 8.0 330.33 18.26
9.4488 -.006 10.892 7.874 0.315 13.005 40.25 22356K SK-28023 N-052 P-52 RN-56 260 -.15 301.27 210 10.0 425.45 22.00
10.2362 -.006 11.861 8.268 0.394 16.75 48.50
•
B376 TIMKEN PRODUCTS CATALOG
LOCKNUT AND LOCKWASHER
Spherical Roller Bearings
SHAFT ADAPTER ACCESSORIES FOR CYLINDRICAL BORE BEARINGS LOCKNUT AND LOCKWASHER
• The table below shows dimensions for locknuts and lockwashers used in the mounting of cylindrical bore bearings on shafts.
• Other dimensions and tolerances related to shaft con?gurations also are shown.
• Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222, 223, etc.).
S
L H
D
M
A
S-3
W
W L H S M
+ 1/64 + 1/64 + 1/64 + 1/64 + 1/64
Q
A
B
C1
S
B
R
Bearing Lock- Lock- Thds.
Threads Shaft Locknut Lockwasher
Bore nut washer Per Major Dia. Pitch Dia. Minor
Relief S-3(1)
Dia.
-0 -0 -0
mm mm mm mm mm
in. in. in. in. in.
C1 D Q R B S
Inch Max. Min. Max. Min. Dia.
A
-0 -0
mm mm mm mm mm mm
mm mm mm mm mm mm mm mm in. in. in. in. in.
in. in. in. in. in. in. in. in.
35 N 07 W 07 18 34.95 34.74 34.03 33.93 33.22 32.82 31.75 2.4 12.7 2.4 4.8 3.2 52.39 11.4 1.3 36.0 57.2 4.5
1.376 1.3678 1.3399 1.3359 1.3078 1.2922 1 1/4 3/32 1/2 3/32 3/16 1/8 2 1/16 0.448 0.050 1.416 2 1/4 0.176
40 N 08 W 08 18 39.7 39.49 38.78 38.67 37.97 37.57 36.51 3.2 13.5 2.4 7.9 3.2 57.15 11.4 1.5 40.7 62.7 7.4
1.563 1.5548 1.5269 1.5224 1.4948 1.4792 1 7/16 1/8 17/32 3/32 5/16 1/8 2 1/4 0.448 0.058 1.603 2 15/32 0.290
45 N 09 W 09 18 44.88 44.67 43.96 43.85 43.15 42.75 42.86 3.2 13.5 2.4 7.9 4.0 64.3 11.4 1.5 46.2 69.5 7.4
1.767 1.7588 1.7309 1.7264 1.6988 1.6832 1 11/16 1/8 17/32 3/32 5/16 5/32 2 17/32 0.448 0.058 1.817 2 47/64 0.290
50 N 10 W 10 18 49.96 49.75 49.05 48.93 48.23 47.83 47.63 3.2 15.1 2.4 7.9 4.0 68.3 13.0 1.5 51.2 74.2 7.4
1.967 1.9588 1.9309 1.9264 1.8988 1.8832 1 7/8 1/8 19/32 3/32 5/16 5/32 2 11/16 0.510 0.058 2.017 2 59/64 0.290
55 N 11 W 11 18 54.79 54.58 53.87 53.74 53.06 52.66 52.39 3.2 15.1 3.2 7.9 4.0 75.4 13.0 1.6 56.1 79.0 7.4
2.157 2.1488 2.1209 2.1158 2.0888 2.0732 2 1/16 1/8 19/32 1/8 5/16 5/32 2 31/32 0.510 0.063 2.207 3 7/64 0.290
60 N 12 W 12 18 59.94 59.74 59.03 58.90 58.21 57.82 57.15 3.2 15.9 3.2 7.9 4.0 80.2 13.7 1.6 61.6 85.0 7.4
2.360 2.3518 2.3239 2.3188 2.2918 2.2762 2 1/4 1/8 5/8 1/8 5/16 5/32 3 5/32 0.541 0.063 2.425 3 11/32 0.290
65 N 13 W 13 18 64.72 64.51 63.80 63.67 62.99 62.59 61.91 3.2 16.7 3.2 7.9 4.0 85.7 14.6 1.6 66.4 90.9 7.4
2.548 2.5398 2.5119 2.5068 2.4798 2.4642 2 7/16 1/8 21/32 1/8 5/16 5/32 3 3/8 0.573 0.063 2.613 3 37/64 0.290
70 N 14 W 14 18 69.88 69.67 68.96 68.83 68.14 67.75 66.68 3.2 16.7 3.2 7.9 6.4 92.1 14.6 1.6 71.5 97.2 7.4
2.751 2.7428 2.7149 2.7098 2.6828 2.6672 2 5/8 1/8 21/32 1/8 5/16 1/4 3 5/8 0.573 0.063 2.816 3 53/64 0.290
75 AN 15 W 15 12 74.50 74.21 73.12 72.99 71.90 71.11 71.44 4.0 17.5 3.2 7.9 6.4 98.4 15.3 1.6 76.3 104.4 7.4
2.933 2.9218 2.8789 2.8735 2.8308 2.7995 2 13/16 5/32 11/16 1/8 5/16 1/4 3 7/8 0.604 0.072 3.003 4 7/64 0.290
80 AN 16 W 16 12 79.68 79.40 78.31 78.16 77.08 76.29 76.20 4.0 17.5 3.2 9.5 6.4 105.6 15.3 1.8 81.5 111.1 9.0
3.137 3.1258 3.0829 3.0770 3.0348 3.0035 3 5/32 11/16 1/8 3/8 1/4 4 5/32 0.604 0.063 3.207 4 3/8 0.353 85 AN 17 W 17 12 84.84 84.55 83.46 83.31 82.24 81.45 80.96 4.0 16.7 3.2 9.5 6.4 111.9 16.1 1.8 87.0 117.5 9.0
3.340 3.3288 3.2859 3.2800 3.2378 3.2065 3 3/16 5/32 21/32 1/8 3/8 1/4 4 13/32 0.635 0.072 3.425 4 5/8 0.353
90 AN 18 W 18 12 89.59 89.30 88.21 88.02 86.99 86.20 85.73 4.0 20.6 4.0 9.5 6.4 118.3 17.7 2.4 91.7 125.4 9.0
3.527 3.5158 3.4729 3.4655 3.4248 3.3935 3 3/8 5/32 13/16 5/32 3/8 1/4 4 21/32 0.698 0.094 3.612 4 15/16 0.353
95 AN 19 W 19 12 94.74 94.46 93.37 93.18 92.15 91.35 90.49 4.0 21.4 4.0 9.5 6.4 125.4 18.5 2.4 97.3 132.6 9.0
3.730 3.7188 3.6759 3.6685 3.6278 3.5965 3 9/16 5/32 27/32 5/32 3/8 1/4 4 15/16 0.729 0.094 3.830 5 7/32 0.353
100 AN 20 W 20 12 99.52 99.23 98.14 97.96 96.92 96.13 96.84 4.0 22.2 4.0 9.5 7.9 131.8 19.3 2.4 102.1 139.7 9.0
3.918 3.9068 3.8639 3.8565 3.8158 3.7845 3 13/16 5/32 7/8 5/32 3/8 5/16 5 3/16 0.760 0.094 4.018 5 1/2 0.353
105 AN 21 W 21 12 104.70 104.41 103.32 103.11 102.10 101.31 100.01 4.0 22.2 4.0 9.5 7.9 138.1 19.3 2.4 107.2 144.9 9.0
4.122 4.1108 4.0679 4.0596 4.0198 3.9885 3 15/16 5/32 7/8 5/32 3/8 5/16 5 7/16 0.760 0.094 4.222 5 45/64 0.353
110 AN 22 W 22 12 109.86 109.57 108.48 108.27 107.26 106.46 106.36 4.0 23.0 4.8 9.5 7.9 145.3 20.1 3.2 112.4 154.0 9.0
4.325 4.3138 4.2709 4.2626 4.2228 4.1915 4 3/16 5/32 29/32 3/16 3/8 5/16 5 23/32 0.791 0.125 4.425 6 1/16 0.353
120 AN 24 W 24 12 119.79 119.50 118.41 118.20 117.19 116.40 115.89 4.0 23.8 4.8 9.5 7.9 155.6 20.9 3.2 122.7 164.3 9.0
4.716 4.7048 4.6619 4.6536 4.6138 4.5825 4 9/16 5/32 15/16 3/16 3/8 5/16 6 1/8 0.823 0.125 4.831 6 15/32 0.353
130 AN 26 W 26 12 129.69 129.41 128.32 128.11 127.10 126.30 125.41 4.0 25.4 4.8 12.7 7.9 171.5 22.5 3.2 132.7 178.6 11.1
5.106 5.0948 5.0519 5.0436 5.0038 4.9725 4 15/16 5/32 1 3/16 1/2 5/16 6 3/4 0.885 0.125 5.226 7 1/32 0.435
140 AN 28 W 28 12 139.62 139.34 138.25 138.04 137.03 136.23 134.94 4.0 27.0 4.8 15.9 7.9 180.2 24.1 3.2 142.7 188.9 15.0
5.497 5.4858 5.4429 5.4346 5.3948 5.3635 5 5/16 5/32 1 1/16 3/16 5/8 5/16 7 3/32 0.948 0.125 5.617 7 7/16 0.590
150 AN 30 W 30 12 149.56 149.27 148.18 147.97 146.96 146.16 146.05 4.0 28.6 5.6 15.9 9.5 195.3 24.9 4.0 152.9 204.8 15.0
5.888 5.8768 5.8339 5.8256 5.7858 5.7545 5 3/4 5/32 1 1/8 7/32 5/8 3/8 7 11/16 0.979 0.156 6.018 8 1/16 0.590
160 AN 32 W 32 8 159.61 159.23 157.55 157.32 155.72 154.92 153.99 6.4 30.2 6.0 15.9 9.5 204.8 26.4 4.0 163.2 214.3 15.0
6.284 6.2688 6.2028 6.1937 6.1306 6.0993 6 1/16 1/4 1 3/16 15/64 5/8 3/8 8 1/16 1.041 0.156 6.424 8 7/16 0.590
170 AN 34 W 34 8 169.14 168.75 167.08 166.85 165.24 164.45 163.51 6.4 31.0 6.0 19.1 9.5 219.9 27.3 4.0 172.7 230.2 18.2
6.659 6.6438 6.5778 6.5687 6.5056 6.4743 6 7/16 1/4 1 7/32 15/64 3/4 3/8 8 21/32 1.073 0.156 6.799 9 1/16 0.715
180 AN 36 W 36 8 179.48 179.09 177.41 177.18 175.58 174.79 174.63 6.4 31.8 6.0 19.1 9.5 230.2 28.0 4.0 183.0 239.7 18.2
7.066 7.0508 6.9848 6.9757 6.9126 6.8813 6 7/8 1/4 1 1/4 15/64 3/4 3/8 9 1/16 1.104 0.156 7.206 9 7/16 0.715
190 AN 38 W 38 8 189.79 189.40 187.73 187.50 185.89 185.10 184.15 6.4 32.5 6.0 19.1 9.5 240.5 28.8 4.0 193.3 250.8 18.2
7.472 7.4568 7.3908 7.3817 7.3186 7.2873 7 1/4 1/4 1 9/32 15/64 3/4 3/8 9 15/32 1.135 0.156 7.612 9 7/8 0.715
200 AN 40 W 40 8 199.31 198.93 197.25 196.96 195.42 194.62 193.68 6.4 34.1 6.0 22.2 9.5 250.0 30.4 4.0 203.6 261.9 21.3
7.847 7.8318 7.7658 7.7544 7.6936 7.6623 7 5/8 1/4 1 11/32 15/64 7/8 3/8 9 27/32 1.198 0.156 8.017 10 5/16 0.840
220 N 44 W 44 8 219.15 218.77 217.09 216.78 215.25 214.46 211.14 6.4 34.9 9.5 27.0 9.5 279.4 31.8 3.2 221.1 290.5 23.9
8.628 8.6128 8.5468 8.5347 8.4746 8.4433 8 5/16 1/4 1 3/8 3/8 1 1/16 3/8 11 1.250 0.125 8.703 11 7/16 0.940
A
Caption:
(1) See page B383 for suggested S-3 shaft tolerances.
TIMKEN PRODUCTS CATALOG B377
•
Caption:
LOCKNUT AND LOCKPLATE
ROLLER BEARINGS
SHAFT ADAPTER ACCESSORIES FOR CYLINDRICAL BORE BEARINGS LOCKNUT AND LOCKPLATE
M
F S
• The table below shows dimensions for locknuts and lockwashers used in the mounting of cylindrical bore bearings on shafts.
• Other dimensions and tolerances related to shaft con?gurations also are shown.
• Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222, 223, etc.).
Bearing Lock- Lock- Thds.
Bore nut washer Per Major Dia. Pitch Dia. Minor
1 8
1 16
DIA. SOFT IRON WIRE
( "R" LONG )
D
H
*
1
2 3 8
G
C1
A
S-3
A
B
A
1 4
L
1 16
* Sizes N670 and above :
S M C1 D G H R F
+ 1/64 + 1/64 ±.010"
-0 -0
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
240 N 048 P 48 6 239.83 239.31 237.08 236.76 234.63 233.44 233.36 42.86 11.1 28.6 34.9 290.5 34.1 22.48 9.5 203.2 43.26
9.442 9.4218 9.3337 9.3213 9.2374 9.1905 9 3/16 1 11/16 7/16 1 1/8 1 3/8 11 7/16 1 11/32 0.885 3/8 8 1 45/64
260 N 052 P 52 6 258.88 258.36 256.13 255.8 253.68 252.49 252.41 45.24 11.1 30.2 37.3 309.6 35.7 22.48 9.5 228.6 44.85
10.192 10.1718 10.0837 10.0707 9.9874 9.9405 9 15/16 1 25/32 7/16 1 3/16 1 15/32 12 3/16 1 13/32 0.885 3/8 9 1 49/64
280 N 056 P 56 6 279.50 278.99 276.75 276.42 274.31 273.11 273.05 47.63 11.1 31.8 39.7 330.2 38.1 25.65 9.5 228.6 47.23
11.004 10.9838 10.8957 10.8827 10.7994 10.7525 10 3/4 1 7/8 7/16 1 1/4 1 9/16 13 1 1/2 1.010 3/8 9 1 55/64
300 N 060 P 60 6 299.34 298.83 296.59 296.26 294.14 292.95 292.1 49.21 11.1 34.9 41.3 360.4 39.7 25.65 12.7 254.0 50.01
11.785 11.7648 11.6767 11.6637 11.5804 11.5335 11 1/2 1 15/16 7/16 1 3/8 1 5/8 14 3/16 1 9/16 1.010 1/2 10 1 31/32
320 N 064 P 64 6 319.08 318.56 316.32 315.98 313.88 312.69 312.74 51.59 11.1 36.5 43.7 381.0 42.1 25.65 12.7 254.0 52.39
12.562 12.5418 12.4537 12.4402 12.3574 12.3105 12 5/16 2 1/32 7/16 1 7/16 1 23/32 15 1 21/32 1.010 1/2 10 2 1/16
340 N 068 P 68 5 337.90 337.49 335.36 334.95 332.31 331.11 331.79 56.36 11.1 38.1 48.4 400.1 45.2 25.65 12.7 279.4 55.56
13.303 13.287 13.203 13.187 13.083 13.036 13 1/16 2 7/32 7/16 1 1/2 1 29/32 15 3/4 1 25/32 1.010 1/2 11 2 3/16
360 N 072 P 72 5 359.00 358.60 356.46 356.06 353.42 352.22 350.84 56.36 12.7 38.1 48.4 419.1 45.2 32.00 12.7 279.4 55.56
14.134 14.118 14.034 14.018 13.914 13.867 13 13/16 2 7/32 1/2 1 1/2 1 29/32 16 1/2 1 25/32 1.260 1/2 11 2 3/16
380 N 076 P 76 5 378.99 378.59 376.45 376.05 373.41 372.21 371.48 59.53 12.7 38.1 51.59 450.9 48.4 32.00 15.1 304.8 61.12
14.921 14.905 14.821 14.805 14.701 14.654 14 5/8 2 11/32 1/2 1 1/2 2 1/32 17 3/4 1 29/32 1.260 19/32 12 2 13/32
400 N 080 P 80 5 399.01 398.60 396.47 396.06 393.42 392.23 390.53 63.50 12.7 41.3 55.6 469.9 52.4 32.00 15.1 330.2 65.09
15.709 15.693 15.609 15.593 15.489 15.442 15 3/8 2 1/2 1/2 1 5/8 2 3/16 18 1/2 2 1/16 1.260 19/32 13 2 9/16
420 N 084 P 84 5 419.00 418.59 416.46 416.05 413.41 412.22 411.16 63.50 12.7 41.3 55.6 490.5 52.4 35.18 15.1 330.2 65.09
16.496 16.480 16.396 16.380 16.276 16.229 16 3/16 2 1/2 1/2 1 5/8 2 3/16 19 5/16 2 1/16 1.385 19/32 13 2 9/16
440 N 088 P 88 5 438.99 438.58 436.45 436.05 433.40 432.21 431.80 71.44 12.7 46.0 63.50 520.7 60.3 35.18 15.1 355.6 75.41
17.283 17.267 17.183 17.167 17.063 17.016 17 2 13/16 1/2 1 13/16 2 1/2 20 1/2 2 3/8 1.385 19/32 14 2 31/32
460 N 092 P 92 5 459.00 458.60 456.46 456.06 453.42 452.22 450.85 71.44 12.7 46.0 63.50 539.8 60.3 35.18 15.1 406.4 75.41
18.071 18.055 17.971 17.955 17.851 17.804 17 3/4 2 13/16 1/2 1 13/16 2 1/2 21 1/4 2 3/8 1.385 19/32 16 2 31/32
480 N 096 P 96 5 478.99 478.59 476.45 476.05 473.41 472.21 469.9 71.44 12.7 46.0 63.50 560.4 60.3 38.35 15.1 406.4 75.41
18.858 18.842 18.758 18.742 18.638 18.591 18 1/2 2 13/16 1/2 1 13/16 2 1/2 22 1/16 2 3/8 1.510 19/32 16 2 31/32
500 N 500 P 500 5 499.01 498.60 496.47 496.06 493.42 492.23 489.0 79.4 12.7 46.0 71.4 579.4 68.3 38.35 15.1 406.4 83.3
19.646 19.630 19.546 19.530 19.426 19.379 19 1/4 3 1/8 1/2 1 13/16 2 13/16 22 13/16 2 11/16 1.510 19/32 16 3 9/32
530 N 530 P 530 4 529.01 528.50 525.83 525.32 522.15 520.55 517.5 79.4 12.7 46.0 71.4 630.2 68.3 41.53 20.6 425.5 83.3
20.827 20.807 20.702 20.682 20.557 20.494 20 3/8 3 1/8 1/2 1 13/16 2 13/16 24 13/16 2 11/16 1.635 13/16 16 3/4 3 9/32
560 N 560 P 560 4 559.00 558.50 555.83 555.32 552.15 550.55 549.3 85.7 12.7 46.0 77.8 649.3 71.4 41.53 20.6 476.3 89.7
22.008 21.988 21.883 21.863 21.738 21.675 21 5/8 3 3/8 1/2 1 13/16 3 1/16 25 9/16 2 15/16 1.635 13/16 18 3/4 3 17/32
600 N 600 P 600 4 599.01 598.50 595.83 595.33 592.15 590.55 587.4 85.7 12.7 46.0 77.8 700.1 74.6 41.53 20.6 508.0 89.7
23.583 23.563 23.458 23.438 23.313 23.250 23 1/8 3 3/8 1/2 1 13/16 3 1/16 27 9/16 2 15/16 1.635 13/16 20 3 17/32
630 N 630 P 630 4 629.01 628.50 625.83 625.32 622.15 520.55 619.1 85.7 12.7 50.8 77.8 730.3 74.6 47.88 20.6 520.7 92.1
24.764 24.744 24.639 24.619 24.494 24.431 24 3/8 3 3/8 1/2 2 3 1/16 28 3/4 2 15/16 1.885 13/16 20 1/2 3 5/8
670 N 670 P 670 4 669.01 668.50 665.84 665.33 662.15 660.55 657.2 90.5 12.7 50.8 82.6 779.5 79.4 47.88 20.6 546.1 96.8
26.339 26.319 26.214 26.194 26.069 26.006 25 7/8 3 9/16 1/2 2 3 1/4 30 11/16 3 1/8 1.885 13/16 21 1/2 3 13/16
710 N 710 P 710 3 709.02 708.33 704.77 704.09 700.02 698.42 695.3 101.6 15.9 50.8 93.7 830.3 90.5 51.30 25.4 571.5 108.0
27.914 27.887 27.747 27.720 27.56 27.497 27 3/8 4 5/8 2 3 11/16 32 11/16 3 9/16 2.020 1 22 1/2 4 1/4
750 N 750 P 750 3 749.02 748.34 744.78 744.09 740.03 738.43 736.6 101.6 15.9 50.8 93.7 870.0 90.5 57.66 25.4 584.2 108.0
29.489 29.462 29.322 29.295 29.135 29.072 29 4 5/8 2 3 11/16 34 1/4 3 9/16 2.270 1 23 4 1/4
800 N 800 P 800 3 799.01 798.32 794.77 794.08 790.02 788.42 787.4 101.6 15.9 50.8 93.7 920.8 90.5 57.66 25.4 616.0 108.0
31.457 31.430 31.290 31.263 31.103 31.040 31 4 5/8 2 3 11/16 36 1/4 3 9/16 2.270 1 24 1/4 4 1/4
850 N 850 P 850 3 849.02 848.34 844.78 844.09 840.03 838.43 835.0 101.6 15.9 50.8 93.7 979.5 90.5 64.01 25.4 647.7 108.0
33.426 33.399 33.259 33.232 33.072 33.009 32 7/8 4 5/8 2 3 11/16 38 9/16 3 9/16 2.520 1 25 1/2 4 1/4
900 N 900 P 900 3 899.01 898.32 894.77 894.08 890.02 888.42 885.8 111.1 15.9 50.8 103.2 1030.3 100.0 64.01 25.4 666.8 117.5
35.394 35.367 35.227 35.200 35.040 34.977 34 7/8 4 3/8 5/8 2 4 1/16 40 9/16 3 15/16 2.520 1 26 1/4 4 5/8
950 N 950 P 950 3 949.02 948.33 944.78 944.09 940.03 938.43 933.5 114.3 19.1 50.8 108 1092.2 100.0 64.01 25.4 692.2 117.5
37.363 37.336 37.196 37.169 37.009 36.946 36 3/4 4 1/2 3/4 2 4 1/4 43 3 15/16 2.520 1 27 1/4 4 5/8
(1) See page B395 for suggested S-3 shaft tolerances. (2) C is outer ring width which may be obtained from bearing dimension tables.
H
C(2)+ D +
Threads Shaft Locknut/Lockplate
Relief S-3(1) L H
Dia. + 1/64 + 1/64
A -0 -0
Inch Max. Min. Max. Min. Dia.
Caption:
•
B378 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearings
MOUNTING CYLINDRICAL BORE BEARINGS HEAT EXPANSION METHOD
MOUNTING PROCEDURES
Depending on the size of the bearing and the application, there are different methods for mounting roller bearings. In all methods, certain basic rules must be followed.
CLEANLINESS
• Choose a clean environment, free from dust or moisture.
• The installer should make every effort to ensure cleanliness by use of protective screens and clean cloths.
PLAN THE WORK
• Know in advance your plans and have the necessary tools at hand. This reduces the amount of time for the job and decreases the chance for dirt to get into the bearing.
INSPECTION AND PREPARATION
• All component parts of the machine should be on hand and thoroughly cleaned before proceeding.
• Housings should be cleaned, including blowing out the oil holes.
• Do not use air hose on bearings.
• If blind holes are used, insert a magnetic rod to remove metal chips that might be lodged there during fabrication.
• Shaft shoulders and spacer rings contacting the bearing should be square with the shaft axis.
• The shaft ?llet must be small enough to clear the radius of the bearing.
• On original installations, all component parts should
be checked against the detail speci?cation prints for dimensional accuracy. Shaft and housing should be carefully checked for size and form (roundness, etc.).
SHAFT AND HOUSING FINISH
• Shaft surfaces on which the bearing will be mounted must be clean and free from nicks and burrs.
• For applications with stationary housing and rotating shaft, it is suggested that the bearing seat on the shaft be ground to
63 RMS (micro-inches) maximum.
• If it is impractical to use a ground ?nish, a machined ?nish of 125 RMS is acceptable in many cases, but the amount of interference ?t should be slightly increased.
• For a stationary outer ring, which is required to ?oat (e.g., slide axially in the housing), a housing ?nish of 63 RMS maximum is suggested.
• Where the outer ring is not required to ?oat, a surface ?nish of 125 RMS maximum is generally satisfactory.
DO NOT REMOVE THE BEARING FROM ITS WRAPPING UNTIL YOU ARE READY TO MOUNT IT.
• Most applications require a tight interference ?t on the shaft.
• Mounting is simpli?ed by heating the bearing to expand it suf?ciently to slide easily onto the shaft.
• Two methods of heating are commonly used:
- Tank of heated oil.
- Induction heating.
• The ?rst is accomplished by heating the bearing in a tank of oil that has a high ?ash point.
• The oil temperature should not be allowed to exceed 121? C (250? F). A temperature of 93? C (200? F) is suf?cient for most applications.
• The bearing should be heated for 20 or 30 minutes, until it is expanded suf?ciently to slide onto the shaft easily.
• Induction heating method is used for mounting small bearings in production line assembly.
• Induction heating is rapid. Care must be taken to prevent bearing temperature from exceeding 93? C (200? F).
• Trial runs with the unit and bearing are usually necessary to obtain proper timing.
• Thermal crayons melted at predetermined temperatures can be used to check the bearing temperature.
• While bearing is hot, it should be positioned squarely against the shoulder.
• Lockwashers and locknuts or clamping plates are then installed to hold the bearing against he shoulder of the shaft.
• As the bearing cools, the locknut or clamping plate should be tightened.
• In cases of outer ring rotation, where the outer ring is a tight ?t in the housing, the housing member can be expanded by heating.
• The oil bath is shown in Figure 1. The bearing should not be in direct contact with the heat source.
• The usual arrangement is to have a screen several inches from the bottom of the tank. Small support blocks separate the bearing from the screen.
• It is important to keep the bearing away from any localized high-heat source that may raise its temperature excessively, resulting in race hardness reduction.
• Flame-type burners are commonly used. An automatic device for temperature control is desirable.
• If safety regulations prevent the use of an open heated oil bath, a mixture of 15 percent soluble-oil water may be used.
This mixture may be heated to a maximum of 93? C (200? F) without being ?ammable.
A
B
Caption:
A
Figure 1:
Heat Expansion Method
BEARING
BEARING HELD FROM BOTTOM BY SCREEN
OIL
BEARING SUPPORT BLOCK
FLAME BURNER
TIMKEN PRODUCTS CATALOG B379
•
Caption:
ROLLER BEARINGS
ARBOR PRESS METHOD
SHAFT MOUNTING TAPERED BORE SPHERICAL ROLLER BEARINGS
• The alternate method of mounting, generally used only on smaller sizes, is to press the bearing onto the shaft or into the housing. This can be done by using an arbor press and a mounting tube as shown in Figure 2.
• The tube can be made from soft steel with an inside diameter slightly larger than the shaft.
• The O.D. of the tube should not exceed the maximum shoulder height given in the table of dimensions.
• The tube should be faced square at both ends. It should be thoroughly clean inside and out, and long enough to clear the end of the shaft after the bearing is mounted.
• If outer ring is being pressed into housing, the O.D. of the mounting tube should be slightly smaller than the housing bore. The I.D. should not be less than the suggested housing basking diameter in the tables of dimensions.
• Coat the shaft with a light machine oil to reduce the force needed for a press ?t.
• Carefully place the bearing on the shaft, making sure it is square with the shaft axis.
• Apply steady pressure from the arbor ram to drive the bearing ?rmly against the shoulder.
• Never attempt a press ?t on a shaft by applying pressure to the outer ring, or a press ?t in a housing by applying pressure to the inner ring.
• Use a feeler gage with the thinnest blade of .0015 in.
• Place the bearing in an upright position with the inner and outer ring faces parallel.
• Place the thumbs on the inner ring bore and oscillate the inner ring two or three elements.
• Position the individual roller assemblies so that a roller is at the top of the inner ring on both sides of the bearing.
• With the roller in the correct position, insert a thin blade of the feeler gage between the roller and the outer ring.
• Move it carefully along the top roller, between the roller and outer ring raceway. Repeat this procedure, using thicker feeler gage blades, until one is found that will not go through.
• The blade thickness that preceded the “no-go” blade is a measure of RIC before installation.
Caption:
• Start the mounting procedure by lubricating the tapered shaft with a light coat of machine oil.
• Slide bearing onto the shaft as far as it will go.
• As the locknut is tightened, the interference ?t builds up resulting in expansion of the inner ring.
• Periodically measure to keep track of the reduction in RIC.
• Continue the procedure until the proper amount of reduction is obtained. Do not exceed suggested amount of reduction.
• As a ?nal check, make sure that the remaining RIC equals or exceeds the minimum mounted clearance shown in the table to the right.
A
B
Figure 2:
Arbor Press Method
A
Caption:
•
B380 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearings
MOUNTING TIMKEN® TAPERED BORE SPHERICAL ROLLER BEARINGS
Nominal bearing
Radial Internal Clearance Suggested Axial displacement tapered Minimum permissible bore (mm)
prior to mounting (mm) reduction of RIC (mm) shaft installation (mm) RIC after installation
Normal
1:12 Taper** 1:30 Taper** Normal C3 C4 over incl. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max.
30 40 0.035 0.050 0.050 0.065 0.065 0.085 0.020 0.025 0.300 0.380 - - 0.015 0.025 0.040
40 50 0.045 0.060 0.060 0.080 0.080 0.100 0.025 0.030 0.380 0.460 - - 0.020 0.030 0.050
50 65 0.055 0.075 0.075 0.095 0.095 0.120 0.030 0.040 0.460 0.560 - - 0.025 0.040 0.060
65 80 0.070 0.095 0.095 0.120 0.120 0.150 0.040 0.050 0.560 0.760 - - 0.025 0.045 0.075
80 100 0.080 0.110 0.100 0.140 0.140 0.180 0.045 0.065 0.680 0.970 - - 0.035 0.050 0.075 100 120 0.100 0.135 0.135 0.170 0.170 0.220 0.050 0.070 0.760 1.070 1.900 2.540 0.050 0.060 0.100 120 140 0.120 0.160 0.160 0.200 0.200 0.260 0.065 0.090 0.890 1.270 2.290 3.050 0.055 0.075 0.115 140 160 0.130 0.180 0.180 0.230 0.230 0.300 0.075 0.100 1.140 1.520 2.670 3.430 0.055 0.075 0.125
160 180 0.140 0.200 0.200 0.260 0.260 0.340 0.075 0.115 1.140 1.650 2.670 4.060 0.060 0.090 0.150 180 200 0.160 0.220 0.220 0.290 0.290 0.370 0.090 0.125 1.400 1.900 3.050 4.450 0.070 0.100 0.165 200 225 0.180 0.250 0.250 0.320 0.320 0.410 0.100 0.140 1.520 2.030 3.560 4.830 0.075 0.115 0.180 225 250 0.200 0.270 0.270 0.350 0.350 0.450 0.115 0.150 1.780 2.290 4.060 5.330 0.090 0.115 0.200
250 280 0.220 0.300 0.300 0.390 0.390 0.490 0.115 0.165 1.780 2.540 4.060 5.840 0.100 0.140 0.230 280 315 0.240 0.330 0.330 0.430 0.430 0.540 0.125 0.180 1.900 2.670 4.450 6.220 0.100 0.150 0.250 315 355 0.270 0.360 0.360 0.470 0.470 0.590 0.140 0.190 2.030 2.790 4.830 6.600 0.115 0.165 0.280 355 400 0.300 0.400 0.400 0.520 0.520 0.650 0.150 0.200 2.290 3.050 5.330 7.110 0.130 0.190 0.330
400 450 0.330 0.440 0.440 0.570 0.570 0.720 0.165 0.215 2.540 3.300 5.840 7.620 0.150 0.230 0.360 450 500 0.370 0.490 0.490 0.630 0.630 0.790 0.180 0.230 2.670 3.430 6.220 8.000 0.165 0.270 0.410 500 560 0.410 0.540 0.540 0.680 0.680 0.870 0.200 0.250 3.050 3.810 7.110 8.890 0.180 0.290 0.440 560 630 0.460 0.600 0.600 0.760 0.760 0.980 0.230 0.280 3.430 4.190 8.000 9.780 0.200 0.320 0.510
630 710 0.510 0.670 0.670 0.850 0.850 1.090 0.250 0.300 3.810 4.570 8.890 10.670 0.200 0.370 0.550
710 800 0.570 0.750 0.750 0.960 0.960 1.220 0.280 0.350 4.190 5.330 9.780 12.450 0.230 0.390 0.610
800 900 0.640 0.840 0.840 1.070 1.070 1.370 0.300 0.380 4.570 5.720 10.670 13.330 0.250 0.460 0.690
900 1000 0.710 0.930 0.930 1.190 1.190 1.520 .0350 0.430 5.334 6.480 12.450 15.110 0.280 0.490 0.750
1000 1120 0.770 1.030 1.030 1.300 1.300 1.670 0.400 0.480 6.100 7.240 14.220 16.890 0.280 0.550 0.810 1120 1250 0.830 1.120 1.120 1.420 1.420 1.830 0.430 0.500 6.480 7.620 15.110 17.780 0.330 0.610 0.910
* Axial displacement values apply to solid steel shafts or to hollow steel shafts with bore diameter less than half the shaft diameter. For shaft materials other than steel or for thin-wall shafts, please consult your Timken representative.
** 1:12 Taper used for 222, 223, 230, 231, 232, 233, 239 series. 1: 30 Taper used for 240, 241, 242 series. For sleeve mounting, multiply axial displacement values by 1.1 for 1:12 taper or by 1.05 for 1:30 taper. Questions on tapered shaft data, consult your Timken representative.
C3
C4
A
B
Caption:
A
Caption:
Caption:
Note: Tapered bore bearings must have the proper amount of radial internal clearance before installation to provide for the required reduction of RIC during mounting and to compensate for any further internal reduction from abnormal temperature conditions. For special applications, send complete operating data to your Timken representative for suggestions on radial internal clearance.
• During mounting, the RIC should be checked at the unloaded roller. If this is at the bottom, make sure that the roller is raised to seat ?rmly at the inboard position of the inner race.
• When the suggested amount of reduction of RIC has been accomplished, the bearing is properly ?tted.
• Complete the procedure by peening the lockwasher tang into the locknut slot or securing the lockplate.
Example: Bearing 22328K C3 (140 mm bore with a C3 clearance pattern) is being mounted on a tapered shaft.
a. By measuring with feeler gage, initial RIC is established
to be .007 in.
b. Reference to chart above indicates proper ?t is obtained
when RIC is reduced by .0025 in. to .0035 in., or
approximately .003in.
Initial clearance .007"
Reduction of RIC - .003" .004"
c. Locknut is tightened until RIC reaches .004 in.. Final check
against minimum RIC after mounting shows this
value to be safe.
TIMKEN PRODUCTS CATALOG B381
•
ROLLER BEARINGS
Caption:
NOTES
A
B
A
Caption:
•
B382 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearing Pillow Blocks
SPHERICAL ROLLER BEARING PILLOW BLOCKS
Overview: Spherical roller bearing pillow blocks combine rugged cast iron or steel housings with high-capacity bearings to meet the toughest demands of industry. Each pillow block contains an advanced-design spherical roller bearing with improved geometry and raceway ?nish for maximum load capacity and service life. Integrated housing and bearing features enhance unit lubrication characteristics. Multiple sealing options protect against contamination.
• Sizes: 35 mm - 300 mm shafts (1.37795 in. - 11.811 in.). Special shaft sizes up to 1000 mm (39.37 in.) and beyond.
• Markets: Conveyors, mining, rolling mills and pulp and paper mills.
• Features: Split construction for convenient assembly and disassembly. These units include pry tool slots and the exclusive Pry-Lug fulcrum, which simplify bearing inspection, service and replacement.
• Bene?ts: Caps can be removed easily and quickly without damage to the bearing or housing.
B
Caption:
Caption:
Caption:
Caption:
FPO
TIMKEN PRODUCTS CATALOG B383
•
Caption:
B
B
Pillow Blocks
SAF two- or four-bolt pillow block, cast iron
SDAF four-bolt heavy duty type pillow block, cast iron SAFS two- or four-bolt pillow block, cast steel
FSAF four-bolt pillow block, cast iron (only when an option)
FSAFS four-bolt pillow block, cast steel (only when an option)
SDAFS four-bolt heavy-duty pillow block, cast steel
To indicate shaft size and used only for pillow block units of 8 7/16 in. shaft size or larger.
SDAF 23152 K 91/2
–
FXOP
Caption:
K indicated on adapter type mounting arrangement (for 230, 231, 232 Series, SDAF231K and SDAF232K Series)
DV DUSTAC seals - both sides DC DUSTAC seals - one side
Number indicates basic spherical bearing series. See product data charts for spherical bearing number.
Indicate construction: FXOP ?xed open FXCL ?xed closed FLOP ?oat open FLCL ?oat closed
•
B384 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearing Pillow Blocks
B
Page
Page
Introduction ............................................................................. B386
Design and Construction ........................................................ B368
Mounting .................................................................................. B387
Adapter vs. Straight Bore
Fixed and Float Pillow Blocks
Closed End Installations
Lubrication ............................................................................... B387
Seals ......................................................................................... B387
Load Ratings and Life .............................................................. B387
DIMENSIONS – PILLOW BLOCK UNITS
SAF225, SAF226 Series Adapter Mounting .......................... B388
SDAF225, SDAF226 Series Adapter Mounting ..................... B389
SAF230, SDAF230 Series Adapter Mounting ........................ B390
SDAF231K, SDAF232K Series Adapter Mounting ................ B391
SAF222, SAF223 Series, Straight Bore Mounting ................ B392
SDAF222, SDAF223 Series, Straight Bore Mounting ........... B393
SDAF231, SDAF232 Series, Straight Bore Mounting ........... B394
Shaft Diameters ....................................................................... B395
TAKE-UP UNITS
TU Series Adapter Mounting ................................................. B396
TTU Series Adapter Mounting ............................................... B397
Shaft Seals ............................................................................... B398
Sine Bar Gages .........................................................................B400
Hydraulic Nuts ..........................................................................B401
Hydraulic Nuts – Metric .....................................................B402
Hydraulic Nuts – English ...................................................B403
Shaft Adapter Accessories for Tapered Bore Bearings .........B404
Shaft Adapter Accessories for Straight Bore Bearings .........B405
Metric Adapter Accessories ....................................................B412
Caption:
TIMKEN PRODUCTS CATALOG B385
•
SPHERICAL ROLLER BEARINGS
Caption:
INTRODUCTION
Timken capabilities in the engineering and manufacture of heavy-duty pillow blocks provide important bene?ts to users.
Another very important bene?t is Timken’s worldwide sales organization, staffed with experienced bearing engineers who are available for consultation on any pillow block or bearing application. Expert engineering assistance is available for applications involving shaft sizes 40 inches and larger such as BOF trunnions, bridge blocks and ball mills. If your design calls for shaft sizes or loads not listed in this catalog, contact your Timken representative for information about availability of special units.
B
B
DESIGN AND CONSTRUCTION
Timken supplies pillow blocks equipped with either tapered bore bearings plus adapters for mounting on straight shafts or cylindrical bore bearings for assembly on shouldered shafts.
Timken spherical roller bearing pillow blocks are made of split construction for convenient assembly and disassembly. These units include pry tool slots and the exclusive Pry-Lug fulcrum that simplify bearing inspection, service, and replacement. Caps can be removed easily and quickly without damage to the bearing or housing.
Precision ?t is assured by the Timken system of doweling caps and bases together at an early stage of manufacturing so that they remain a single unit during machining. They are not interchangeable as separate parts and become precisely mated components.
Timken manufactures pillow blocks in two styles: SAF and SDAF. The larger SDAF block is suggested for extreme duty applications.
Caps and bases are made from high-grade stress-relieved cast iron as standard. They also are available in cast steel.
All Timken pillow blocks are designed for four-bolt mounting. Certain smaller sizes are normally furnished for two-bolt mounting. These assemblies are indicated in the tables and can be ordered with optional four-bolt base.
Four cap bolts are used in most Timken pillow blocks in order to equalize the pressure between cap and base, preventing loss of lubricant.
The illustration below shows all parts of a pillow block assembly that are described throughout this section.
Caption:
Matched Cap & Base
Exploded view of a Timken spherical roller bearing pillow block, showing tapered bore spherical roller bearing, adapter sleeve, locknut and lockwasher, stabilizing ring and triple labyrinth seals. Recesses in cap and base, that form pry tool slot, and integral fulcrum lugs in base and cap are shown.
Bolt & Washer
Caption:
LER Seal Ring
Spherical Roller Bearing
Tapered Ring
Locknut
Steel Stabilizing
Ring
Lockwasher
LER Seal Ring
•
B386 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearing Pillow Blocks
MOUNTING
LUBRICATION
ADAPTER VS. STRAIGHT BORE
Usually a spherical roller bearing pillow block assembly is mounted on a straight shaft using a tapered bore bearing and adapter assembly. Standard commercial shafting can be used without additional machining. (Suggested shaft diameters are shown on page B395). Adapter mount also permits maximum ?exibility in the axial positioning of the bearing on the shaft and will accommodate light locational thrust loads. Timken pillow blocks for tapered bore and adapter mounted bearings are available in Series 225, 226, 230, 231K and 232K.
Adapter mounted spherical roller bearings require the correct removal of diametral clearance from the bearing to prevent relative rotation between inner race and sleeve or shaft. Failure to employ proper mounting procedures can cause heating and reduced bearing performance. For proper shaft mounting of adapter type spherical roller bearings, see B380 of the spherical roller bearing section.
When application conditions produce heavy thrust loads, or a need exists for exact axial location or a positive shaft interference ?t, a direct straight bore mounting may be the best option. This requires a shouldered shaft, machined for proper ?t, and a straight bore bearing. Timken pillow block assemblies for straight bore applications are available in Series 222, 223, 231 and 232.
Suggested ?ts for shafts in cylindrical bore spherical roller bearings are shown in the engineering section. For applications involving heavy shock, vibration, unbalanced rotating loads or other abnormal conditions, consult your Timken representative.
FIXED AND FLOAT PILLOW BLOCKS
Any style of Timken pillow blocks can be easily installed either at the ?oat or ?xed position on the shaft. For the ?xed position, a stabilizing ring is added between the bearing outer face ring and the housing shoulder to positively locate the shaft and prevent axial movement.
Some applications require centering of the bearing in its housing. To accomplish this, two special width stabilizing rings can be ordered.
In the ?oat position, the ring is not used, allowing the bearing to move axially (a maximum of 3/8 in.) to compensate for thermal expansion or contraction of the shaft.
Pillow blocks ordered by the numbers in the dimension tables are ?xed units. To order ?oat units, specify by adding suf?x “Float” or “FL” to the pillow block number.
CLOSED END INSTALLATIONS
In some applications, the shaft end is designed to terminate inside the pillow block. For this design, positive fitting end-closure inserts are available to seal out contaminants and retain lubricant. Timken heavy-duty end plugs include O-rings for positive sealing.
Designers and installers need to make sure the shaft end does not contact the closure. A minimum of 1/8 in. clearance at maximum thermal expansion is suggested between the end of the shaft and the closure. Dimension “Y” in the tables de?nes the maximum permissible length of shaft from centerline of the pillow block housing. If end closure is desired, specify by adding “CL” (one end closed) to the pillow block assembly number.
Timken pillow block housings have been designed for grease and oil bath lubrication. They also can be modified easily to accommodate circulating oil or oil/air mist systems. Grease ?ttings or sight gages are available upon request.
A lubrication groove and oil holes are provided in the bearing outer ring. This feature, designated by adding suf?x “W33” to the bearing number, should be speci?ed whenever re-ordering bearings for pillow blocks. In most cases, the fresh lubricant is fed directly to the center of the bearing between the rows of rollers and distributed to the rest of the bearing. This assures the used lubricant is purged from the bearing.
B
SEALS
Precision triple ring labyrinth seals are supplied with all Timken pillow blocks to exclude foreign matter and retain lubricants. The pillow block base includes extra large oil return holes at the bottom of the seal grooves to prevent leakage past the seals.
For extremely contaminated or abrasive environments, Timken has developed the exclusive DUSTAC™ seal. This patented seal offers protection against concentrations of dust or abrasive material that a labyrinth seal cannot keep out. See page B398 for further information on DUSTAC.
LOAD RATINGS AND LIFE
Caption:
Load ratings for the spherical roller bearings that are used in pillow blocks are found in the dimension tables on pages B356 through B372.
Life calculation formulas are found in the engineering section. In addition to individual bearing selection, the ability of the pillow block to carry the operating load should be considered.
It should be noted that the load rating ?gures supplied in this catalog are applicable only when the load direction is generally toward the base of the pillow block. If the pillow block must be mounted so that the load could be applied in any other direction, consult your Timken representative.
TIMKEN PRODUCTS CATALOG B387
•
Caption:
SPHERICAL ROLLER BEARINGS
TAPERED BORE MOUNTING SAF225 AND SAF226 SERIES
• The basic number for ordering complete pillow block assemblies is listed in the table below.
• Each assembly includes the housing cap and base, cap bolts, bearing, bearing adapter, locknut and washer, stabilizing ring, and triple ring seals.
• If only the pillow block housing is desired, use the numbers listed in column headed “Housing Only”. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
• Assembly and pillow blocks as described on this page constitute a ?xed unit. To order ?oat units, specify part number plus suf?x “Float” or “FL”.
Shaft tolerances: ± .003" to 4"
3 " 16
FIXED END
L
S-1 K
Y
FLOAT END
H
A
B
B
D
E
F
B
C
• Assemblies shown are furnished in cast iron. If cast steel is desired, add the letter “S” to the alpha pre?x (e.g., SAFS 22515).
• Four-bolt bases are standard on all assemblies except as noted.
Pillow Standard A B C D E F H K L Y Base Bolts Bearing Adapter(4) Housing(2) Stabi-(3) Triple Ass'y Block Shaft(1) Oil Required Number Assembly Only lizing Seal Wt. Assembly Diam Level Number Ring
S-1 (Max.) (Min.) No. Size 1 Req’d 2 Req’d
in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
SERIES SAF225
SAF22509 1 7?16 2 1?4 8 1?4 2 3?8 13?16 7 6 1?4 — 4 3?8 31?32 3 5?8 1 3?32 2 1?2 22209K SNW-9 SAF509 SR-9-9 LER 17 12 SAF22510 1 11?16 2 1?2 8 1?4 2 3?8 15?16 7 6 1?2 — 4 3?4 1 3?32 3 5?8 1 5?32 2 1?2 22210K SNW-10 SAF510 SR-10-0 LER 20 13 SAF22511 1 15?16 2 3?4 9 5?8 2 3?4 15?16 7 7?8 7 3?8 — 5 11?32 1 3?16 3 3?4 1 3?16 2 1?2 22211K SNW-11 SAF 511 SR-11-0 LER-24 16 SAF22513 2 3?16 3 11 3 1?8 1 9 1?2 8 1?8 — 5 25?32 1 1?8 4 5?16 1 7?32 2 1?2 22213K SNW-13 SAF 513 SR-13-0 LER-29 19.5 SAF22515 2 7?16 3 1?4 11 1?4 3 1?8 1 1?8 9 5?8 8 5?8 — 6 3?8 1 1?4 4 3?4 1 9?32 2 5?8 22215K SNW-15 SAF515 SR-15-0 LER37 30 FSAF22515 2 7?16 3 1?4 11 1?4 3 1?8 1 1?8 9 5?8 8 5?8 1 7?8 6 3?8 1 1?4 4 3?4 1 9?32 4 1?2 22215K SNW-15 FSAF515 SR-15-0 LER37 30 SAF22516 2 11?16 3 1?2 13 3 1?2 1 3?16 11 9 5?8 — 6 7?8 1 11?32 4 7?8 1 21?64 2 3?4 22216K SNW-16 SAF516 SR-16-13 LER44 37 FSAF22516 2 11?16 3 1?2 13 3 1?2 1 3?16 11 9 5?8 2 1?8 6 7?8 1 11?32 4 7?8 1 21?64 4 5?8 22216K SNW-16 FSAF516 SR-16-13 LER44 37
SAF22518 3 3?16 4 13 3?4 3 7?8 1 1?2 11 5?8 10 3?8 — 7 3?4 1 17?32 6 1?4 1 37?64 2 3?4 22218K SNW-18 SAF518 SR-18-15 LER69 49 FSAF22518 3 3?16 4 13 3?4 3 7?8 1 1?2 11 5?8 10 3?8 2 1?8 7 3?4 1 17?32 6 1?4 1 37?64 4 5?8 22218K SNW-18 FSAF518 SR-18-15 LER69 49
SAF22522 3 15?16 4 15?16 16 1?2 4 3?4 2 14 1?2 12 5?8 2 3?4 9 9?16 1 7?8 6 3?8 1 61?64 4 3?4 22222K SNW-22 SAF522 SR-22-19 LER109 81 SAF22524 4 3?16 5 1?4 16 1?2 4 3?4 2 1?8 14 1?2 13 1?4 2 3?4 10 1?4 1 15?16 7 3?8 2 3?32 4 3?4 22224K SNW-24 SAF524 SR-24-20 LER113 94 SAF22526 4 7?16 6 18 3?8 5 1?8 2 3?8 16 14 5?8 3 1?4 11 9?16 2 7?16 8 2 17?64 4 7?8 22226K SNW-26 SAF526 SR-26-0 LER117 137
SAF22540 7 3?16 8 1?4 29 1?2 8 3 3?8 25 22 1?2 5 17 3?16 2 11?16 10 13?16 3 9?32 4 1 1?4 22240K SNW-40 SAF540 SR-40-34 LER159 445 SAF22544 7 15?16 9 1?2 32 3?4 8 3?4 3 3?4 27 7?8 24 3?4 5 1?4 19 5?8 3 3?8 11 1?2 3 17?32 4 1 1?2 22244K SNW-44 SAF544 SR-44-38 LER167 615
SERIES SAF226
SAF22615 2 7?16 4 13 3?4 3 7?8 1 5?8 11 5?8 10 3?8 2 1?8 7 9?16 1 19?32 5 7?8 1 7?8 2,4 3?4, 5?8 22315K SNW-115 SAF 615 SR-18-15 LOR 37 52 SAF22616 2 11?16 4 1?4 14 1?4 3 7?8 1 3?4 12 5?8 10 5?8 2 1?8 8 1?4 1 11?16 6 1?2 1 15?16 2,4 3?4, 5?8 22316K SNW-116 SAF 616 SR-19-16 LOR 44 71 SAF22617 2 15?16 4 1?2 15 1?4 4 3?8 1 3?4 13 1?8 11 5?8 — 8 11?16 1 13?16 6 5?8 1 57?64 2 7?8 22317K SNW-117 SAF617 SR-20-17 LER184 81 FSAF22617 2 15?16 4 1?2 15 1?4 4 3?8 1 3?4 13 1?8 11 5?8 2 3?8 8 11?16 1 13?16 6 5?8 1 57?64 4 3?4 22317K SNW-117 FSAF617 SR-20-17 LER184 81
SAF22626 4 7?16 6 11?16 22 6 1?4 2 5?8 19 1?4 17 3?8 3 3?4 13 5?16 2 5?8 8 3?4 2 27?32 4 1 22326K SNW-126 SAF626 SR-0-26 LER117 245 SAF22628 4 15?16 7 1?16 24 3?4 6 3?4 2 3?4 21 5?8 19 3?8 4 1?4 14 9?16 2 11?16 9 3?8 3 5?64 4 1 22328K SNW-128 SAF628 SR-0-28 LER122 310 SAF22630 5 3?16 7 1?2 26 3?4 7 1?8 3 23 5?8 20 7?8 4 5?8 15 1?2 2 7?8 9 11?16 3 17?64 4 1 22330K SNW-130 SAF630 SR-36-30 LER125 350 SAF22632 5 7?16 7 7?8 28 7 1?2 3 1?8 24 3?8 21 5?8 4 1?2 15 11?16 2 15?16 10 3?4 3 7?16 4 1 1?4 22332K SNW-132 SAF632 SR-38-32 LER130 420
(3) Stabilizing ring is used for ?xed (FX) block; do not use for ?oat (FL) mounting.
(2) “Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings as required. (4) Includes sleeve, locknut and lockwasher. Add shaft size to order. Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
•
SAF22517 2 15?16 3 3?4 13 3 1?2 1 1?4 11 9 7?8 — 7 1?4 1 7?16 4 15?16 1 27?64 2 3?4 22217K SNW-17 SAF517 SR-17-14 LER53 40 FSAF22517 2 15?16 3 3?4 13 3 1?2 1 1?4 11 9 7?8 2 1?8 7 1?4 1 7?16 4 15?16 1 27?64 4 5?8 22217K SNW-17 FSAF517 SR-17-14 LER53 40
SAF22520 3 7?16 4 1?2 15 1?4 4 3?8 1 3?4 13 1?8 11 5?8 — 8 11?16 1 3?4 6 1 49?64 2 7?8 22220K SNW-20 SAF520 SR-20-17 LER102 65 FSAF22520 3 7?16 4 1?2 15 1?4 4 3?8 1 3?4 13 1?8 11 5?8 2 3?8 8 11?16 1 3?4 6 1 49?64 4 3?4 22220K SNW-20 FSAF520 SR-20-17 LER102 65
Caption:
SAF22528 4 15?16 6 20 1?8 5 7?8 2 3?8 17 1?8 16 3 3?8 11 3?4 2 1?8 7 3?4 2 13?32 4 1 22228K SNW-28 SAF528 SR-28-0 LER122 159 SAF22530 5 3?16 6 5?16 21 1?4 6 1?4 2 1?2 18 1?4 17 3 3?4 12 1?2 2 3?16 8 3?8 2 37?64 4 1 22230K SNW-30 SAF530 SR-30-0 LER125 189 SAF22532 5 7?16 6 11?16 22 6 1?4 2 5?8 19 1?4 17 3?8 3 3?4 13 5?16 2 3?16 8 3?4 2 49?64 4 1 22232K SNW-32 SAF532 SR-32-0 LER130 225 SAF22534 5 15?16 7 1?16 24 3?4 6 3?4 2 3?4 21 5?8 19 3?8 4 1?4 14 9?16 2 5?16 9 3?8 2 59?64 4 1 22234K SNW-34 SAF534 SR-34-0 LER140 300 SAF22536 6 7?16 7 1?2 26 3?4 7 1?8 3 23 5?8 20 7?8 4 5?8 15 1?2 2 9?16 9 11?16 2 61?64 4 1 22236K SNW-36 SAF536 SR-36-30 LER148 330 SAF22538 6 15?16 7 7?8 28 7 1?2 3 1?8 24 3?8 21 5?8 4 1?2 15 11?16 2 5?8 10 3?4 3 7?64 4 1 1?4 22238K SNW-38 SAF538 SR-38-32 LER155 375
SAF22618 3 3?16 4 3?4 15 1?2 4 3?8 2 13 1?2 12 2 1?4 9 3?16 2 7 2 3?64 4 3?4 22318K SNW-118 SAF618 SR-21-18 LER188 90 SAF22620 3 7?16 5 1?4 16 1?2 4 3?4 2 1?8 14 1?2 13 1?4 2 3?4 10 1?4 2 1?8 7 3?8 2 19?64 4 3?4 22320K SNW-120 SAF620 SR-24-20 LER102 113 SAF22622 3 15?16 6 18 3?8 5 1?8 2 3?8 16 14 5?8 3 1?4 11 9?16 2 1?2 8 2 31?64 4 7?8 22322K SNW-122 SAF622 SR-0-22 LER109 151 SAF22624 4 3?16 6 5?16 21 1?4 6 1?4 2 1?2 18 1?4 17 3 3?4 12 1?2 2 9?16 8 3?8 2 41?64 4 1 22324K SNW-124 SAF624 SR-0-24 LER113 201
SAF22634 5 15?16 8 1?4 29 1?2 8 3 3?8 25 22 1?2 5 17 3?16 3 1?16 10 13?16 3 19?32 4 1 1?4 22334K SNW-134 SAF634 SR-40-34 LER140 485 SAF22636 6 7?16 8 7?8 31 1?4 8 1?4 3 1?2 26 5?8 24 5 1?4 18 1?2 3 3?8 11 1?4 3 47?64 4 1 1?4 22336K SNW-136 SAF636 SR-0-36 LER148 545 SAF22638 6 15?16 9 1?2 32 3?4 8 3?4 3 3?4 27 7?8 24 3?4 5 1?4 19 5?8 3 11?16 11 1?2 3 57?64 4 1 1?2 22338K SNW-138 SAF638 SR-44-38 LER155 655 SAF22640 7 3?16 9 7?8 34 1?4 9 4 29 1?2 26 1?4 5 1?2 20 3?16 3 3?4 12 1?4 4 5?64 4 1 1?2 22340K SNW-140 SAF640 SR-0-40 LER159 725
(1) See page B395 for suggested shaft diameter S-1 tolerances.
B388 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearing Pillow Blocks
3 " 16
Pillow Standard A B C D E F H K L Y Base Bolts Bearing Adapter(4) Housing(2) Stabi- Triple Ass'y Block Shaft(1) Oil Required Number Assembly Only lizing (3) Seal Wt. Assembly Diam. Level Number Ring
S-1 (Max.) (Min.) No. Size 1 Req’d 2 Req’d
in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
SERIES SDAF225
SDAF22520 3 7?16 4 1?2 15 1?4 6 1 7?8 13 1?8 11 5?8 3 3?8 8 15?16 1 3?4 6 3?4 1 49?64 4 3?4 22220K SNW-20 SDAF520 SR-20-17 LER75 81
SDAF22522 3 15?16 4 15?16 16 1?2 6 3?4 2 1?8 14 1?2 12 5?8 4 9 7?8 1 7?8 7 1?4 1 61?64 4 7?8 22222K SNW-22 SDAF522 SR-22-19 LER93 94
SDAF22524 4 3?16 5 1?4 16 1?2 6 7?8 2 1?4 14 1?2 13 1?4 4 1?8 10 1?2 1 15?16 7 3?8 2 3?32 4 7?8 22224K SNW-24 SDAF524 SR-24-20 LER113 137
SDAF22532 5 7?16 6 11?16 22 8 1?4 2 1?2 19 1?4 17 3?8 5 13 11?16 2 3?16 8 3?4 2 49?64 4 1 1?8 22232K SNW-32 SDAF532 SR-32-0 LER130 300
SDAF22534 5 15?16 7 1?16 24 3?4 9 2 1?2 21 5?8 19 3?8 5 1?2 14 1?4 2 5?16 9 5?8 2 59?64 4 1 1?4 22234K SNW-34 SDAF534 SR-34-0 LER140 310
SDAF22536 6 7?16 7 1?2 26 3?4 9 3?8 2 3?4 23 5?8 20 7?8 5 7?8 15 3?16 2 9?16 10 2 61?64 4 1 1?4 22236K SNW-36 SDAF536 SR-36-30 LER148 350
SERIES SDAF226
SDAF22617 2 15?16 4 1?2 15 1?4 6 1 7?8 13 1?8 11 5?8 3 3?8 8 15?16 1 13?16 6 3?4 1 57?64 4 3?4 22317K SNW-117 SDAF617 SR-20-17 LER59 94
SDAF22618 3 3?16 4 3?4 15 1?2 6 1?8 2 13 1?2 12 3 5?8 9 7?16 2 6 7?8 2 3?64 4 3?4 22318K SNW-118 SDAF618 SR-21-18 LER69 137
SDAF22626 4 7?16 6 11?16 22 8 1?4 2 1?2 19 1?4 17 3?8 5 13 11?16 2 5?8 8 3?4 2 27?64 4 1 1?8 22326K SNW-126 SDAF626 SR-0-26 LER117 300
SDAF22628 4 15?16 7 1?16 24 3?4 9 2 1?2 21 5?8 19 3?8 5 1?2 14 1?4 2 11?16 9 5?8 3 5?64 4 1 1?8 22328K SNW-128 SDAF628 SR-0-28 LER122 310
SDAF22630 5 3?16 7 1?2 26 3?4 9 3?8 2 3?4 23 5?8 20 7?8 5 7?8 15 3?16 2 7?8 9 3?4 3 17?64 4 1 1?4 22330K SNW-130 SDAF630 SR-36-30 LER125 395
SDAF22638 6 15?16 9 1?2 32 11 1?4 3 1?2 27 7?8 25 5?8 7 1?4 19 1?4 3 11?16 11 13?16 4 57?64 4 1 1?2 22338K SNW-138 SDAF638 SR-44-38 LER224 705
SDAF22640 7 3?16 9 7?8 33 1?2 11 3?4 3 1?2 29 1?4 26 5?8 7 5?8 19 15?16 3 3?4 12 1?4 4 5?64 4 1 5?8 22340K SNW-140 SDAF640 SR-0-40 LER228 825
(1) See page B395 for suggested shaft diameter S-1 tolerances.
(3) Stabilizing ring is used for ?xed (FX) block; do not use for ?oat (FL) mounting.
(2) “Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings as required. (4) Includes sleeve, locknut and lockwasher. Add shaft size to order.
Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
TIMKEN PRODUCTS CATALOG B389
TAPERED BORE MOUNTING SDAF225 AND SDAF226 SERIES
• Each assembly includes the housing cap and base, cap bolts, bearing, bearing adapter, locknut and washer, stabilizing ring and triple ring seals.
• To order pillow block housing only, use the number listed in the “Housing Only” column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
• Assembly and pillow blocks as described on this page constitute ?xed units.
• To order ?oat units, specify part number plus suf?x “Float” or “FL”.
• Assemblies shown are furnished in cast iron. If cast steel is desired, add the letter “S” to the alpha pre?x (e.g., SAFS 22515).
FIXED END FLOAT END
L
S-1 K
Y
F
H
B
A
D
E
B
C
SDAF22526 4 7?16 6 18 3?8 7 1?2 2 3?8 16 14 5?8 4 1?2 11 7?8 2 7?16 8 2 17?64 4 1 22226K SNW-26 SDAF526 SR-26-0 LER117 159
SDAF22528 4 15?16 6 20 1?8 7 1?2 2 3?8 17 1?8 16 4 1?2 12 1?16 2 1?8 7 13?16 2 13?32 4 1 1?8 22228K SNW-28 SDAF528 SR-28-0 LER122 189
SDAF22530 5 3?16 6 5?16 21 1?4 7 7?8 2 1?2 18 1?4 17 4 3?4 12 13?16 2 3?16 8 3?8 2 37?64 4 1 1?8 22230K SNW-30 SDAF530 SR-30-0 LER125 225
SDAF22538 6 15?16 7 7?8 27 5?8 10 3 23 1?2 21 1?2 6 1?4 16 1?4 2 5?8 10 5?8 3 7?64 4 1 3?8 22238K SNW-38 SDAF538 SR-38-32 LER224 420
SDAF22540 7 3?16 8 1?4 28 3?4 10 1?2 3 1?4 25 23 6 3?4 17 1?8 2 11?16 11 1?8 3 9?32 4 1 3?8 22240K SNW-40 SDAF540 SR-40-34 LER228 545
SDAF22544 7 15?16 9 1?2 32 11 1?4 3 1?2 27 7?8 25 5?8 7 1?4 19 1?4 3 3?8 11 7?8 3 17?32 4 1 1?2 22244K SNW-44 SDAF544 SR-44-36 LER236 665
Caption:
SDAF22620 3 7?16 5 1?4 16 1?2 6 7?8 2 1?4 14 1?2 13 1?4 4 1?8 10 1?2 2 1?8 7 3?8 2 19?64 4 7?8 22320K SNW-120 SDAF620 SR-24-20 LER75 159
SDAF22622 3 15?16 6 18 3?8 7 1?2 2 3?8 16 14 5?8 4 1?2 11 7?8 2 1?2 8 2 31?64 4 1 22322K SNW-122 SDAF622 SR-0-22 LER93 189
SDAF22624 4 3?16 6 5?16 21 1?4 7 7?8 2 1?2 18 1?4 17 4 3?4 12 13?16 2 9?16 8 3?8 2 41?64 4 1 1?8 22324K SNW-124 SDAF624 SR-0-24 LER113 225
SDAF22632 5 7?16 7 7?8 27 5?8 10 3 23 1?2 21 1?2 6 1?4 16 1?4 2 15?16 10 5?8 3 7?16 4 1 3?8 22332K SNW-132 SDAF632 SR-38-32 LER211 420
SDAF22634 5 15?16 8 1?4 28 3?4 10 1?2 3 1?4 25 23 6 3?4 17 1?8 3 1?16 11 1?8 3 19?32 4 1 3?8 22334K SNW-134 SDAF634 SR-40-34 LER215 525
SDAF22636 6 7?16 8 7?8 30 1?2 10 3?4 3 1?4 26 3?8 24 1?8 6 7?8 17 15?16 3 7?8 11 3?8 3 47?64 4 1 1?2 22336K SNW-136 SDAF636 SR-0-36 LER220 645
•
SAF230K, SDAF230K Series
SPHERICAL ROLLER BEARINGS
TAPERED BORE MOUNTING SAF230K, SDAF230K SERIES
• Each assembly includes the housing cap and base, cap bolts, bearing, bearing adapter, locknut and washer, stabilizing ring and triple ring seals.
• If only the pillow block is desired, use the numbers listed in column “Housing Only” column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
• Assembly and pillow blocks as described on this page constitute ?xed units.
• To order ?oat units, specify part number plus suf?x “Float” or “FL”.
• All assemblies shown are furnished in cast iron. If cast steel is desired, add the letter “S” to the alpha pre?x (e.g., SAFS 23024).
• Please note that for applications SAF23048 and larger, the shaft size must be included in the part description when ordering (e.g., SAF23048-8 15/16).
Caption:
FIXED END
L
FLOAT END
H
S-1 K
A
3
B
B
16
Y
F
C
D
Two stabilizing rings are supplied with housings SAF048 through SAF056 and SDAF060K through SDAF076K. For ?xed applications both rings must be used. Do not use stabilizing rings for ?oat mounting.
SAF23024K 4 3?16 4 1?2 15 1?4 4 3?8 1 3?4 13 1?8 11 5?8 2 3?8 8 11?16 1 9?16 6 1 55?64 3?4 23024K SNW-3024 SAF024K SR-20-17 LER113 60 SAF23026K 4 7?16 4 15?16 16 1?2 4 3?4 2 14 1?2 12 5?8 2 3?4 9 9?16 1 11?16 6 3?8 2 1?32 3?4 23026K SNW-3026 SAF026K SR-22-19 LER117 76 SAF23028K 4 15?16 5 1?4 16 1?2 4 3?4 2 1?8 14 1?2 13 1?4 2 3?4 10 1?4 1 13?16 7 3?8 2 1?8 3?4 23028K SNW-3028 SAF028K SR- 0-20 LER122 90 SAF23030K 5 3?16 6 18 3?8 5 1?8 2 3?8 16 14 5?8 3 1?4 11 9?16 2 5?16 8 2 13?64 7?8 23030K SNW-3030 SAF030K SR- 0-21 LER125 125 SAF23032K 5 7?16 6 18 3?8 5 1?8 2 3?8 16 14 5?8 3 1?4 11 9?16 2 1?16 8 2 11?32 7?8 23032K SNW-3032 SAF032K SR- 0-22 LER130 132 SAF23034K 5 15?16 6 20 1?8 5 7?8 2 3?8 17 1?8 16 3 3?8 11 3?4 1 3?4 7 3?4 2 33?64 1 23034K SNW-3034 SAF034K SR- 0-24 LER140 154 SAF23036K 6 7?16 6 11?16 22 6 1?4 2 5?8 19 1?4 17 3?8 3 3?4 13 5?16 2 3?16 8 3?4 2 11?16 1 23036K SNW-3036 SAF036K SR- 0-26 LER148 212 SAF23038K 6 15?16 6 11?16 22 6 1?4 2 5?8 19 1?4 17 3?8 3 3?4 13 5?16 1 15?16 8 3?4 2 47?64 1 23038K SNW-3038 SAF038K SR-32- 0 LER155 220 SAF23040K 7 3?16 7 1?16 24 3?4 6 3?4 2 3?4 21 5?8 19 3?8 4 1?4 14 9?16 2 13?16 9 3?8 2 15?16 1 23040K SNW-3040 SAF040K SR-34- 0 LER159 295 SAF23044K 7 15?16 7 7?8 28 7 1?2 3 1?8 24 3?8 21 5?8 4 1?2 15 11?16 2 3?8 10 3?4 3 5?32 1 1?4 23044K SNW-3044 SAF044K SR-38-32 LER167 370
SAF23052K-9 7?16 9 7?16 9 1?2 32 3?4 8 3?4 3 3?4 27 7?8 24 3?4 5 1?4 19 7?16 2 15?16 11 7?8 3 53?64 1 1?2 23052K SNP-3052-9 7?16 SAF052K-9 7?16 A8898 LER178-1 587 SAF23052K-9 1?2 9 1?2 9 1?2 32 3?4 8 3?4 3 3?4 27 7?8 24 3?4 5 1?4 19 7?16 2 15?16 11 7?8 3 53?64 1 1?2 23052K SNP-3052-9 1?2 SAF052K-9 1?2 A8898 LER178 585
SERIES SDAF230K
SDAF23060K-10 15?16 10 15?16 12 38 1?4 14 3?4 3 1?2 33 1?2 32 3?4 9 23 7?16 4 7?16 15 1?2 4 9?32 1 5?8 23060K SNP-3060-10 15?16 SDAF060K-10 15?16 A8967 ER858 1175 SDAF23060K-11 11 12 38 1?4 14 3?4 3 1?2 33 1?2 32 3?4 9 23 7?16 4 7?16 15 1?2 4 9?32 1 5?8 23060K SNP-3060-11 SDAF060K-11 A8967 ER825 1174
SDAF23068K-12 7?16 12 7?16 12 39 15 1?4 4 3?16 33 1?2 32 10 24 3 7?16 15 3?4 4 13?16 1 7?8 23068K SNP-3068-12 7?16 SDAF068K-12 7?16 A8969 ER865 1553 SDAF23068K-12 1?2 12 1?2 12 39 15 1?4 4 3?16 33 1?2 32 10 24 3 7?16 15 3?4 4 13?16 1 7?8 23068K SNP-3068-12 1?2 SDAF068K-12 1?2 A8969 ER866 1552 SDAF23072K-12 15?16 12 15?16 12 13?16 41 3?4 15 3?4 4 1?2 36 1?2 35 10 1?2 26 3 7?8 16 1?4 4 53?64 1 7?8 23072K SNP-3072-12 15?16 SDAF072K-12 15?16 A8970 ER869 1632 SDAF23072K-13 13 12 13?16 41 3?4 15 3?4 4 1?2 36 1?2 35 10 1?2 26 3 7?8 16 1?4 4 53?64 1 7?8 23072K SNP-3072-13 SDAF072K-13 A8970 ER846 1630 SDAF23072K-13 7?16 13 7?16 12 13?16 41 3?4 15 3?4 4 1?2 36 1?2 35 10 1?2 26 3 7?8 16 1?4 4 53?64 1 7?8 23072K SNP-3072-13 7?16 SDAF072K-13 7?16 A8970 ER872 1614 SDAF23072K-13 1?2 13 1?2 12 13?16 41 3?4 15 3?4 4 1?2 36 1?2 35 10 1?2 26 3 7?8 16 1?4 4 53?64 1 7?8 23072K SNP-3072-13 1?2 SDAF072K-13 1?2 A8970 ER823 1610
(3) Stabilizing ring is used for ?xed (FX) block; do not use for ?oat (FL) mounting.
(2) “Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings as required. (4) Includes sleeve, locknut, lockwasher or lockplate. Add shaft size to order.
Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
E
B
Pillow Standard A B C D E F H K L Y 4 Base Bearing Adapter(4) Housing(2) Stabi- Triple Ass'y Block Shaft(1) Oil Bolts Number Assembly Only lizing(3) Seal Wt. Assembly Dia. Level Req'd. Number Ring
S-1 (Max.) (Min.) Size
2 Req’d
in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
SERIES SAF230K
SAF23048K-8 7?16 8 7?16 8 1?4 29 1?2 8 3 3?8 25 22 1?2 5 17 3?16 2 1?4 11 1?8 3 17?32 1 1?4 23048K SNP-3048-8 7?16 SAF048K-8 7?16 A8897 LER526 430 SAF23048K-8 1?2 8 1?2 8 1?4 29 1?2 8 3 3?8 25 22 1?2 5 17 3?16 2 1?4 11 1?8 3 17?32 1 1?4 23048K SNP-3048-8 1?2 SAF048K-8 1?2 A8897 LER527 428 SAF23048K-8 15?16 8 15?16 8 1?4 29 1?2 8 3 3?8 25 22 1?2 5 17 3?16 2 1?4 11 1?8 3 17?32 1 1?4 23048K SNP-3048-8 15?16 SAF048K-8 15?16 A8897 LER529 422 SAF23048K-9 9 8 1?4 29 1?2 8 3 3?8 25 22 1?2 5 17 3?16 2 1?4 11 1?8 3 17?32 1 1?4 23048K SNP-3048-9 SAF048K-9 A8897 LER530 420
Caption:
SAF23056K-9 15?16 9 15?16 9 7?8 34 1?4 9 4 29 1?2 26 1?4 5 1?2 20 3?16 2 15?16 12 1?16 3 61?64 1 1?2 23056K SNP-3056-9 15?16 SAF056K-9 15?16 A8819 ER751 640 SAF23056K-10 10 9 7?8 34 1?4 9 4 29 1?2 26 1?4 5 1?2 20 3?16 2 15?16 12 1?16 3 61?64 1 1?2 23056K SNP-3056-10 SAF056K-10 A8819 ER705 635 SAF23056K-10 7?16 10 7?16 9 7?8 34 1?4 9 4 29 1?2 26 1?4 5 1?2 20 3?16 2 15?16 12 1?16 3 61?64 1 1?2 23056K SNP-3056-10 7?16 SAF056K-10 7?16 A8819 ER745 625 SAF23056K-10 1?2 10 1?2 9 7?8 34 1?4 9 4 29 1?2 26 1?4 5 1?2 20 3?16 2 15?16 12 1?16 3 61?64 1 1?2 23056K SNP-3056-10 1?2 SAF056K-10 1?2 A8819 ER710 620
SDAF23064K-11 7?16 11 7?16 12 38 1?4 14 3?4 3 1?2 33 1?2 32 3?4 9 23 7?16 4 1?16 15 1?2 4 7?16 1 5?8 23064K SNP-3064-11 7?16 SDAF064K-11 7?16 A8968 ER861 1275 SDAF23064K-11 1?2 11 1?2 12 38 1?4 14 3?4 3 1?2 33 1?2 32 3?4 9 23 7?16 4 1?16 15 1?2 4 7?16 1 5?8 23064K SNP-3064-11 1?2 SDAF064K-11 1?2 A8968 ER832 1274 SDAF23064K-11 15?16 11 15?16 12 38 1?4 14 3?4 3 1?2 33 1?2 32 3?4 9 23 7?16 4 1?16 15 1?2 4 7?16 1 5?8 23064K SNP-3064-11 15?16 SDAF064K-11 15?16 A8968 ER859 1269 SDAF23064K-12 12 12 38 1?4 14 3?4 3 1?2 33 1?2 32 3?4 9 23 7?16 4 1?16 15 1?2 4 7?16 1 5?8 23064K SNP-3064-12 SDAF064K-12 A8968 ER818 1268
SDAF23076K-13 15?16 13 15?16 12 13?16 41 3?4 15 3?4 4 1?2 36 1?2 35 10 1?2 26 3 7?16 16 1?4 5 1?16 1 7?8 23076K SNP-3076-13 15?16 SDAF076K-13 15?16 A8971 ER875 1687 SDAF23076K-14 14 12 13?16 41 3?4 15 3?4 4 1?2 36 1?2 35 10 1?2 26 3 7?16 16 1?4 5 1?16 1 7?8 23076K SNP-3076-14 SDAF076K-14 A8971 ER876 1685 SDAF23080K-15 15 14 1?2 46 17 1?8 5 1?4 40 3?4 39 1?4 11 29 4 7?16 17 5?8 5 17?32 4,2 23080K SNP-3080-15 SDAF080K-15 1A8974 ER847 2300 SDAF23084K-15 3?4 15 3?4 14 1?2 46 17 1?8 5 1?4 40 3?4 39 1?4 11 29 4 1?16 17 5?8 5 9?16 4,2 23087K SNP-3084-15 3?4 SDAF084K-15 3?4 1A8978 ER885 2300 SDAF23088K-16 1?2 16 1?2 15 1?2 48 3?4 18 3?4 5 1?2 43 1?2 41 3?4 12 1?4 30 1?2 4 1?2 19 1?4 5 3?4 4,21?4 23088AK SNP-3088-161?2 SDAF3088K-16 1?2 2A8979 ER958 2550 SDAF23092K-17 17 15 1?2 48 3?4 18 3?4 5 1?2 43 1?2 41 3?4 12 1?4 30 1?2 4 19 1?4 5 7?8 4,21?4 23082K SNP-3092-17 SDAF3092K-17 2A8980 ER838 2850 SDAF23096K-18 18 17 53 21 5 1?2 46 1?8 44 3?8 14 1?2 33 3?4 5 1?8 21 3?4 5 29?32 4,21?4 23096K SNP-3096-18 SDAF3096K-18 2A8984 ER888 4250 SDAF230/530K-181?2 18 1?2 17 53 21 5 1?2 46 1?8 44 3?8 14 1?2 33 3?4 4 3?4 21 3?4 6 1?2 4,21?4 230/500K SNP-30-500-18 1?2 SDAF30-500K-181?2 2A8976 ER978 4350 SDAF230/530K-191?2 19 1?2 18 54 1?4 21 5?8 5 3?4 48 7?8 47 1?8 15 35 3?4 4 13?16 22 1?4 6 27?32 4,21?2 230/530/K SNP-30-530-19 1?2 SDAF 30-530K-191?2 ER926 5200
(1) See page B395 for suggested shaft diameter S-1 tolerances.
•
B390 TIMKEN PRODUCTS CATALOG
Tapered Bore Mounting SDAF231K, SDAF232K Series
Spherical Roller Bearing Pillow Blocks
TAPERED BORE MOUNTING SDAF231K AND SDAF232K SERIES
• Each assembly includes the housing cap and base, cap bolts, bearing, bearing adapter, locknut and washer, stabilizing ring and triple ring seals.
• To order pillow block housing only, use the numbers listed in the “Housing Only” column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
• Assembly and pillow blocks described on this page constitute ?xed units.
• To order ?oat units, specify part number plus suf?x “Float” or “FL”.
• All assemblies shown are furnished in cast iron. If cast steel is desired, add the letter “S” to the alpha pre?x (e.g., SDAFS 23152K).
FIXED END
L
H
S-1 K
A
3
16
Y
F
C
B
D
FLOAT END
E
B
Pillow Standard A B C D E F H K L 4 Base Bearing Adapter(4) Housing(2) Stabi- Triple Ass'y Block Shaft(1) Oil Bolts Number Assembly Only lizing(3) Seal Wt. Assembly Dia. Level Req'd. Number Ring
S-1 (Max.) (Min.) Size 2 Req’d 2 Req’d
in. in. in. in. in. in. in. in. in. in. in. in. lbs.
SERIES SDAF231K
SDAF23152K 9 7?16 10 1?4 35 13 1?8 3 3?4 30 1?2 29 8 3?4 20 7?8 3 3?8 13 3?4 1 5?8 23152K SNP-3152 SDAF3152K A5679 ER891 1050 SDAF23156K 10 7?16 12 38 1?4 14 3?4 3 3?8 33 1?2 32 3?4 9 23 7?16 4 3?4 15 3?8 1 5?8 23156K SNP-3156 SDAF3156K A8967 ER973 1300
SDAF23160K 10 15?16 12 38 1?4 14 3?4 3 3?8 33 1?2 32 3?4 9 23 7?16 4 1?8 15 3?8 1 5?8 23160K SNP-3160 SDAF3160K A8975 ER858 1350
SDAF23164K 11 15?16 12 13?16 41 3?4 15 3?4 4 1?2 36 1?2 35 10 1?2 25 3?4 4 3?8 16 1?4 1 7?8 23164K SNP-3164 SDAF3164K A8970 ER942 1900
SDAF23168K 12 7?16 14 43 3?4 17 3?4 5 38 1?4 36 3?4 10 3?4 27 7?8 4 15?16 18 1?4 2 23168K SNP-3168 SDAF3168K A8977 ER975 2550
SDAF23172K 13 7?16 14 1?2 46 17 1?8 5 1?4 40 3?4 39 1?4 11 28 7?8 5 17 3?4 2 23172K SNP-3172 SDAF3172K A8974 ER872 2600
SDAF23176K 13 15?16 14 1?2 46 17 1?8 5 1?4 40 3?4 39 1?4 11 28 7?8 4 5?8 17 3?4 2 23176K SNP-3176 SDAF3176K A8978 ER875 2600
SDAF23180K 15 15 1?2 48 3?4 18 3?4 5 1?2 43 1?2 41 3?4 12 1?4 30 1?2 5 1?8 19 1?4 2 1?4 23180K SNP-3180 SDAF3180K A8979 ER847 3000
SDAF23184K 15 3?4 17 52 21 5 1?2 46 1?8 44 3?8 14 1?2 33 3?4 6 21 3?4 2 1?4 23184K SNP-3184 SDAF3184K A8984 ER914 4400
SDAF23188K 16 1?2 17 52 21 5 1?2 46 1?8 44 3?8 14 1?2 33 3?4 5 9?16 21 3?4 2 1?4 23188K SNP-3188 SDAF3188K A8976 ER947 4600
SDAF23192K 17 18 54 1?4 21 5?8 5 3?4 48 7?8 47 1?8 15 35 3?4 6 22 1?4 2 1?2 23192K SNP-3192 SDAF3192K A8990 ER838 5100
SDAF23196K 18 18 54 1?4 21 5?8 5 3?4 48 7?8 47 1?8 15 35 3?4 5 1?2 22 1?4 2 1?2 23196K SNP-3196 SDAF3196K A8998 ER954 5200
Caption:
SERIES SDAF232K
SDAF23248K 8 15?16 10 1?4 35 13 1?8 3 3?4 30 1?2 29 8 3?4 20 7?8 3 9?16 13 3?4 1 5?8 23248K SNP-148 SDAF3248K A5679 ER939 1100
SDAF23252K 9 7?16 12 38 1?4 14 3?4 3 3?8 33 1?2 32 3?4 9 23 7?16 4 3?4 15 3?8 1 5?8 23252K SNP-152 SDAF3252K A8968 ER891 1400
SDAF23256K 10 7?16 12 38 1?4 14 3?4 3 3?8 33 1?2 32 3?4 9 23 7?16 4 3?8 15 3?8 1 5?8 23256K SNP-3256 SDAF3256K A8975 ER973 1400
SDAF23260K 10 15?16 12 13?16 41 3?4 15 3?4 4 1?2 36 1?2 35 10 1?2 25 3?4 4 1?2 16 1?4 1 7?8 23260K SNP-3260 SDAF3260K A8970 ER941 1900
SDAF23264K 11 15?16 14 43 3?4 17 3?4 5 38 1?4 36 3?4 10 3?4 27 7?8 5 1?8 18 1?4 2 23264K SNP-3264 SDAF3264K A8977 ER942 2600
SDAF23268K 12 7?16 14 1?2 46 17 1?8 5 1?4 40 3?4 39 1?4 11 28 7?8 5 17 3?4 2 23268K SNP-3268 SDAF3268K A8978 ER944 2700
SDAF23272K 13 7?16 15 1?2 48 3?4 18 3?4 5 1?2 43 1?2 41 3?4 12 1?4 30 1?2 5 1?2 19 1?4 2 1?4 23272K SNP-3272 SDAF3272K A8979 ER872 3050
SDAF23276K 13 15?16 15 1?2 48 3?4 18 3?4 5 1?2 43 1?2 41 3?4 12 1?4 30 1?2 4 3?8 19 1?4 2 1?4 23276K SNP-3276 SDAF3276K A8980 ER875 3000
SDAF23280K 14 15?16 17 52 21 5 1?2 46 1?8 44 3?8 14 1?2 33 3?4 6 21 3?4 2 1?4 23280K SNP-3280 SDAF3280K A8976 ER976 4650
SDAF23284K 15 3?4 18 54 1?4 21 5?8 5 3?4 48 7?8 47 1?8 15 35 3?4 6 3?8 22 1?4 2 1?2 23284K SNP-3284 SDAF3284K A8990 ER951 4900
SDAF23288K 16 1?2 18 54 1?4 21 5?8 5 3?4 48 7?8 47 1?8 15 35 3?4 5 7?8 22 1?4 2 1?2 23288K SNP-3288 SDAF3288K A8988 ER952 5200
(1) See page B395 for suggested shaft diameter S-1 tolerances.
(3) Stabilizing ring is used for ?xed (FX) block; do not use for ?oat (FL) mounting.
(2) “Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings as required. (4) Includes sleeve, locknut and lockwasher. Add shaft size to order.
Add shaft size to order.
Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
TIMKEN PRODUCTS CATALOG B391
•
SAF222, SAF223 Series
SPHERICAL ROLLER BEARINGS
STRAIGHT BORE MOUNTING SAF222 AND SAF223 SERIES
• Each assembly includes the housing cap and base, cap bolts, bearing, locknut and washer, stabilizing ring and triple ring seals.
• To order pillow block housing only, use the numbers listed in “Housing Only” column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
• Assembly and pillow blocks described on this page constitute ?xed units.
• To order ?oat units, specify part number plus suf?x “Float” or “FL”.
• All assemblies shown are furnished in cast iron. If cast steel is desired, add the letter “S” to the alpha pre?x (e.g., SAFS 22217).
• Four-bolt bases are standard on all assemblies, except as noted.
Caption:
FIXED END
S-3
H
S-2
L
B
B
Y
3 " 16
A
D
Pillow Standard A B C D E F H K L Y Base Bolts Bearing Lock Lock Housing(2) Stabil- Triple Triple Ass'y Block Shaft(1) Oil Required Number Nut Washer Only lizing(3) Seal Seal Wt. Assembly Dia. Level Ring 1 Req’d 1 Req’d
S-2 S-3 (Max.) (Min.) No. Size 1 Req’d S-2 S-3
in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
SERIES SAF222
SAF22217 3 15?16 3 3?16 3 3?4 13 3 1?2 1 1?4 11 9 7?8 — 7 1?4 1 7?16 4 15?16 1 27?64 2 3?4 22217 AN17 W17 SAF217 SR-17-14 LER89 LER63 43
FSAF22217 3 15?16 3 3?16 3 3?4 13 3 1?2 1 1?4 11 9 7?8 2 1?8 7 1?4 1 7?16 4 15?16 1 27?64 4 5?8 22217 AN17 W17 FSAF217 SR-17-14 LER89 LER63 43
SAF22218 4 1?8 3 3?8 4 13 3?4 3 7?8 1 1?2 11 5?8 10 3?8 — 7 3?4 1 17?32 6 1?4 1 37?64 2 3?4 22218 AN18 W18 SAF218 SR-18-15 LER96 LER72 50
FSAF22218 4 1?8 3 3?8 4 13 3?4 3 7?8 1 1?2 11 5?8 10 3?8 2 1?8 7 3?4 1 17?32 6 1?4 1 37?64 4 5?8 22218 AN18 W18 FSAF218 SR-18-15 LER96 LER72 50
SAF22220 4 1?2 3 13?16 4 1?2 15 1?4 4 3?8 1 3?4 13 1?8 11 5?8 — 8 11?16 1 3?4 6 1 49?64 2 7?8 22220 AN20 W20 SAF220 SR-20-17 LER118 LER106 71
FSAF22220 4 1?2 3 13?16 4 1?2 15 1?4 4 3?8 1 3?4 13 1?8 11 5?8 2 3?8 8 11?16 1 3?4 6 1 49?64 4 3?4 22220 AN20 W20 FSAF220 SR-20-17 LER118 LER106 71
SAF22222 4 7?8 4 3?16 4 15?16 16 1?2 4 3?4 2 14 1?2 12 5?8 2 3?4 9 9?16 1 7?8 6 3?8 1 61?64 4 3?4 22222 AN22 W22 SAF222 SR-22-19 LER121 LER113 81
SAF22224 5 5?16 4 9?16 5 1?4 16 1?2 4 3?4 2 1?8 14 1?2 13 1?4 2 3?4 10 1?4 1 15?16 7 3?8 2 3?32 4 3?4 22224 AN24 W24 SAF224 SR-24-20 LER127 LER119 90
SAF22226 5 7?8 4 15?16 6 18 3?8 5 1?8 2 3?8 16 14 5?8 3 1?4 11 9?16 2 7?16 8 2 17?64 4 7?8 22226 AN26 W26 SAF226 SR-26-0 LER136 LER122 127
SAF22228 6 1?4 5 5?16 6 20 1?8 5 7?8 2 3?8 17 1?8 16 3 3?8 11 3?4 2 1?8 7 3?4 2 13?32 4 1 22228 AN28 W28 SAF228 SR-28-0 LER144 LER127 149
SAF22230 6 5?8 5 3?4 6 5?16 21 1?4 6 1?4 2 1?2 18 1?4 17 3 3?4 12 1?2 2 3?16 8 3?8 2 37?64 4 1 22230 AN30 W30 SAF230 SR-30-0 LER151 LER134 175
SAF22232 7 6 1?16 6 11?16 22 6 1?4 2 5?8 19 1?4 17 3?8 3 3?4 13 5?16 2 3?16 8 3?4 2 49?64 4 1 22232 AN32 W32 SAF232 SR-32-0 LER156 LER142 210
SAF22234 7 7?16 6 7?16 7 1?16 24 3?4 6 3?4 2 3?4 21 5?8 19 3?8 4 1?4 14 9?16 2 5?16 9 3?8 2 59?64 4 1 22234 AN34 W34 SAF234 SR-34-0 LER161 LER148 280
SAF22236 7 13?16 6 7?8 7 1?2 26 3?4 7 1?8 3 23 5?8 20 7?8 4 5?8 15 1?2 2 9?16 9 11?16 2 61?64 4 1 22236 AN36 W36 SAF236 SR-36-0 LER165 LER154 305
SAF22238 8 3?8 7 1?4 7 7?8 28 7 1?2 3 1?8 24 3?8 21 5?8 4 1?2 15 11?16 2 5?8 10 3?4 3 7?64 4 1 1?4 22238 AN38 W38 SAF238 SR-38-32 LER171 LER160 350
SAF22240 8 3?4 7 5?8 8 1?4 29 1?2 8 3 3?8 25 22 1?2 5 17 3?16 2 11?16 10 13?16 3 9?32 4 1 1?4 22240 AN40 W40 SAF240 SR-40-34 LER175 LER164 420
SAF22244 9 9?16 8 5?16 9 1?2 32 3?4 8 3?4 3 3?4 27 7?8 24 3?4 5 1?4 19 5?8 3 3?8 11 1?2 3 17?32 4 1 1?2 22244 N44 W44 SAF244 SR-44-38 LER179 LER170 590
SERIES SAF223
SAF22317 3 15?16 3 3?16 4 1?2 15 1?4 4 3?8 1 3?4 13 1?8 11 5?8 – 8 11?16 1 13?16 6 1 57?64 2 7?8 22317 AN17 W17 SAF317 SR-20-17 LER109 LER188 80
FSAF22317 3 15?16 3 3?16 4 1?2 15 1?4 4 3?8 1 3?4 13 1?8 11 5?8 2 3?8 8 11?16 1 13?16 6 1 57?64 4 3?4 22317 AN17 W17 FSAF317 SR-20-17 LER109 LER188 80
SAF22318 4 1?8 3 3?8 4 3?4 15 1?2 4 3?8 2 13 1?2 12 2 1?4 9 3?16 2 7 2 3?64 4 3?4 22318 AN18 W18 FSAF318 SR-21-18 LER112 LER191 92
SAF22320 4 1?2 3 13?16 5 1?4 16 1?2 4 3?4 2 1?8 14 1?2 13 1?4 2 3?4 10 1?4 2 1?8 7 3?8 2 19?64 4 3?4 22320 AN20 W20 SAF320 SR-24-20 LER118 LER106 109
SAF22322 4 7?8 4 3?16 6 18 3?8 5 1?8 2 3?8 16 14 5?8 3 1?4 11 9?16 2 1?2 8 2 31?64 4 7?8 22322 AN22 W22 SAF322 SR-0-22 LER121 LER113 145
SAF22324 5 5?16 4 9?16 6 5?16 21 1?4 6 1?4 2 1?2 18 1?4 17 3 3?4 12 1?2 2 9?16 8 3?8 2 41?64 4 1 22324 AN24 W24 SAF324 SR-0-24 LER127 LER119 195
SAF22326 5 7?8 4 15?16 6 11?16 22 6 1?4 2 5?8 19 1?4 17 3?8 3 3?4 13 15?16 2 5?8 8 3?4 2 27?32 4 1 22326 AN26 W26 SAF326 SR-0-26 LER136 LER122 235
SAF22328 6 1?4 5 5?16 7 1?16 24 3?4 6 3?4 2 3?4 21 5?8 19 3?8 4 1?4 14 9?16 2 11?16 9 3?8 3 5?64 4 1 22328 AN28 W28 SAF328 SR-0-28 LER144 LER127 300
SAF22330 6 5?8 5 3?4 7 1?2 26 3?4 7 1?8 3 23 5?8 20 7?8 4 5?8 15 1?2 2 7?8 9 11?16 3 17?64 4 1 22330 AN30 W30 SAF330 SR-36-30 LER151 LER134 335
SAF22332 7 6 1?16 7 7?8 28 7 1?2 3 1?8 24 3?8 21 5?8 4 1?2 15 11?16 2 15?16 10 3?4 3 7?16 4 1 1?4 22332 AN32 W32 SAF332 SR-38-32 LER156 LER142 405
SAF22334 7 7?16 6 7?16 8 1?4 29 1?2 8 3 3?8 25 22 1?2 5 17 3?16 3 1?16 10 13?16 3 19?32 4 1 1?4 22334 AN34 W34 SAF334 SR-40-34 LER161 LER148 465
SAF22336 7 13?16 6 7?8 8 7?8 31 1?4 8 1?4 3 1?2 26 5?8 24 5 1?4 18 1?2 3 3?8 11 1?4 3 47?64 4 1 1?4 22336 AN36 W36 SAF336 SR-0-36 LER165 LER154 525
SAF22338 8 3?8 7 1?4 9 1?2 32 3?4 8 3?4 3 3?4 27 7?8 24 3?4 5 1?4 19 5?8 3 11?16 11 1?2 3 57?64 4 1 1?2 22338 AN38 W38 SAF338 SR-44-38 LER171 LER160 635
SAF22340 8 3?4 7 5?8 9 7?8 34 1?4 9 4 29 1?2 26 1?4 5 1?2 20 3?16 3 3?4 12 1?4 4 5?64 4 1 1?2 22340 AN40 W40 SAF340 SR-0-40 LER175 LER164 700
(1) See page B395 for suggested shaft diameter S-2, S-3 tolerances.
(2) “Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings as required.
(3) Stabilizing ring is used for ?xed (FX) block; do not use for ?oat (FL) mounting.
Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
•
K
FLOAT END
E
F
B
C
Caption:
B392 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearing Pillow Blocks
3 16
Pillow Standard A B C D E F H K L Y Base Bolts Bearing Lock Lock Housing(2) Stabil- Triple Triple Ass'y Block Shaft(1) Oil Required Number Nut Washer Only lizing(3) Seal Seal Wt. Assembly Dia. Level Ring 1 Req’d 1 Req’d
S-2 S-3 (Max.) (Min.) No. Size 1 Req’d S-2 S-3
in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
SERIES SDAF222
SDAF22220 4 1?2 3 13?16 4 1?2 15 1?4 6 1 7?8 13 1?8 11 5?8 3 3?8 8 15?16 1 3?4 6 3?4 1 49?64 4 3?4 22220 AN20 W20 SDAF220 SR-20-17 LER118 LER106 81
SDAF22222 4 7?8 4 3?16 4 15?16 16 1?2 6 3?4 2 1?8 14 1?2 12 5?8 4 9 7?8 1 7?8 7 1?4 1 61?64 4 7?8 22222 AN22 W22 SDAF222 SR-22-19 LER121 LER113 109
SDAF22224 5 5?16 4 9?16 5 1?4 16 1?2 6 7?8 2 1?4 14 1?2 13 1?4 4 1?8 10 1?2 1 15?16 7 3?8 2 3?32 4 7?8 22224 AN24 W24 SDAF224 SR-24-20 LER127 LER119 113
SDAF22226 5 7?8 4 15?16 6 18 3?8 7 1?2 2 3?8 16 14 5?8 4 1?2 11 7?8 2 7?16 8 2 17?64 4 1 22226 AN26 W26 SDAF226 SR-26-0 LER136 LER122 151
SDAF22228 6 1?4 5 5?16 6 20 1?8 7 1?2 2 3?8 17 1?8 16 4 1?2 12 1?16 2 1?8 7 13?16 2 13?32 4 1 22228 AN28 W28 SDAF228 SR-28-0 LER144 LER127 175
SDAF22230 6 5?8 5 3?4 6 5?16 21 1?4 7 7?8 2 1?2 18 1?4 17 4 3?4 12 13?16 2 3?16 8 3?8 2 37?64 4 1 1?8 22230 AN30 W30 SDAF230 SR-30-0 LER151 LER134 201
SDAF22232 7 6 1?16 6 11?16 22 8 1?4 2 1?2 19 1?4 17 3?8 5 13 11?16 2 3?16 8 3?4 2 49?64 4 1 1?8 22232 AN32 W32 SDAF232 SR-32-0 LER156 LER142 245
SDAF22234 7 7?16 6 7?16 7 1?16 24 3?4 9 2 1?2 21 5?8 19 3?8 5 1?2 14 1?4 2 5?16 9 5?8 2 59?64 4 1 1?4 22234 AN34 W34 SDAF234 SR-34-0 LER161 LER148 300
SDAF22236 7 13?16 6 7?8 7 1?2 26 3?4 9 3?8 2 3?4 23 5?8 20 7?8 5 7?8 15 3?16 2 9?16 10 2 61?64 4 1 1?4 22236 AN36 W36 SDAF236 SR-36-30 LER165 LER154 335
SDAF22238 8 3?8 7 1?4 7 7?8 27 5?8 10 3 23 1?2 21 1?2 6 1?4 16 1?4 2 5?8 10 5?8 3 7?64 4 1 3?8 22238 AN38 W38 SDAF238 SR-38-32 LER240 LER229 405
SDAF22240 8 3?4 7 5?8 8 1?4 28 3?4 10 1?2 3 1?4 25 23 6 3?4 17 1?8 2 11?16 11 1?8 3 9?32 4 1 3?8 22240 AN40 W40 SDAF240 SR-40-34 LER244 LER233 465
SDAF22244 9 9?16 8 5?16 9 1?2 32 11 1?4 3 1?2 27 7?8 25 5?8 7 1?4 19 1?4 3 3?8 11 7?8 3 17?32 4 1 1?2 22244 N44 W44 SDAF240 SR-44-38 LER248 LER239 650
SERIES SDAF223
SDAF22317 3 15?16 3 3?16 4 1?2 15 1?4 6 1 7?8 13 1?8 11 5?8 3 3?8 8 15?16 1 3?16 6 3?4 1 57?64 4 3?4 22317 AN17 W17 SDAF317 SR-20-17 LER109 LER188 80
SDAF22318 4 1?8 3 3?8 4 3?4 15 1?2 6 1?8 2 13 1?2 12 3 5?8 9 7?16 2 6 7?8 2 3?64 4 3?4 22318 AN18 W18 SDAF318 SR-21-18 LER112 LER191 92
SDAF22320 4 1?2 3 13?16 5 1?4 16 1?2 6 7?8 2 1?4 14 1?2 13 1?4 4 1?8 10 1?2 2 1?8 7 3?8 2 19?64 4 7?8 22320 AN20 W20 SDAF320 SR-24-20 LER118 LER106 109
SDAF22322 4 7?8 4 3?16 6 18 3?8 7 1?2 2 3?8 16 14 5?8 4 1?2 11 7?8 2 1?2 8 2 31?64 4 1 22322 AN22 W22 SDAF322 SR-0-22 LER121 LER113 145
SDAF22324 5 5?16 4 9?16 6 5?16 21 1?4 7 7?8 2 1?2 18 1?4 17 4 3?4 12 13?16 2 9?16 8 3?8 2 41?64 4 1 1?8 22324 AN24 W24 SDAF324 SR-0-24 LER127 LER119 195
SDAF22326 5 7?8 4 15?16 6 11?16 22 8 1?4 2 1?2 19 1?4 17 3?8 5 13 11?16 2 5?8 8 3?4 2 27?64 4 1 1?8 22326 AN26 W26 SDAF326 SR-0-26 LER136 LER122 280
SDAF22328 6 1?4 5 5?16 7 1?16 24 3?4 9 2 1?2 21 5?8 19 3?8 5 1?2 14 1?4 2 11?16 9 5?8 3 5?64 4 1 1?4 22328 AN28 W28 SDAF328 SR-0-28 LER144 LER127 305
SDAF22330 6 5?8 5 3?4 7 1?2 26 3?4 9 3?8 2 3?4 23 5?8 20 7?8 5 7?8 15 3?16 2 7?8 9 3?4 3 17?64 4 1 1?4 22330 AN30 W30 SDAF330 SR-36-30 LER151 LER134 375
SDAF22332 7 6 1?16 7 7?8 27 5?8 10 3 23 1?2 21 1?2 6 1?4 16 1?4 2 15?16 10 5?8 3 7?16 4 1 3?8 22332 AN32 W32 SDAF332 SR-38-32 LER225 LER217 445
SDAF22334 7 7?16 6 7?16 8 1?4 28 3?4 10 1?2 3 1?4 25 23 6 3?4 17 1?8 3 1?16 11 1?8 3 19?32 4 1 3?8 22334 AN34 W34 SDAF334 SR-40-34 LER230 LER220 525
SDAF22336 7 13?16 6 7?8 8 7?8 30 1?2 10 3?4 3 1?4 26 3?8 24 1?8 6 7?8 17 15?16 3 3?8 11 3?8 3 47?64 4 1 1?2 22336 AN36 W36 SDAF336 SR-0-36 LER234 LER223 635
SDAF22338 8 3?8 7 1?4 9 1?2 32 11 1?4 3 1?2 27 7?8 25 5?8 7 1?4 19 1?4 3 11?16 11 13?16 3 57?64 4 1 1?2 22338 AN38 W38 SDAF338 SR-44-38 LER240 LER229 700
SDAF22340 8 3?4 7 5?8 9 7?8 33 1?2 11 3?4 3 1?2 29 1?4 26 5?8 7 5?8 19 15?16 3 3?4 12 1?4 4 5?64 4 1 5?8 22340 AN40 W40 SDAF340 SR-0-40 LER244 LER233 725
(1) See page B395 for suggested shaft diameter S-2, S-3 tolerances.
(2) “Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings as required.
(3) Stabilizing ring is used for ?xed (FX) block; do not use for ?oat (FL) mounting.
Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
TIMKEN PRODUCTS CATALOG B393
STRAIGHT BORE MOUNTING SDAF222 AND SDAF223 SERIES
• Each assembly includes the housing cap and base, cap bolts, bearing, locknut and washer, stabilizing ring, and triple ring seals.
• To order pillow block housing only, use the numbers listed in the “Housing Only” column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
• Assembly and pillow blocks described on this page constitute ?xed units.
• To order ?oat units, specify part number plus suf?x “?oat” or “FL”.
• All assemblies shown are furnished in cast iron. If cast steel is desired, add the letter “S” to the alpha pre?x (e.g., SDAS 22220).
FIXED END
H
S-2 K
L
S-3
FLOAT END
Y
B
F
C
A
D
E
B
Caption:
•
Tapered Bore Mounting SDAF231K, SDAF232K Series
SPHERICAL ROLLER BEARINGS
Caption:
STRAIGHT BORE MOUNTING SDAF231 AND SDAF232 SERIES
FIXED END
L
FLOAT END
B
• Each assembly includes the housing cap and base, cap bolts, bearing, locknut and washer, stabilizing ring and triple ring seals.
• To order pillow block housing only, use the numbers listed in the “Housing Only” column. These units include: cap, base, cap bolts, triple ring seals, and stabilizing ring.
• Assembly and pillow blocks described on this page constitute ?xed units.
• To order ?oat units, specify part number plus suf?x “Float” or “FL”.
• All assemblies shown are furnished in cast iron. If cast steel is desired, add the letter “S” to the alpha pre?x (e.g., SDAFS 23152).
• For ?xed applications, both stabilizing rings must be used. Do not use stabilizing rings for “?oat” mounting.
H
S-1 K
A
B
3
16
Y
F
C
D
E
B
Pillow Standard A B C D E F H K L 4 Base Bearing Lock Lock Housing(2) Stabil- Triple Triple Ass'y Block Shaft(1) Oil Bolts Number Nut Washer Only lizing(3) Seal Seal Wt. Assembly Dia. Level Req'd Ring 1 Req’d 1 Req’d
S-2 S-3 (Max.) (Min.) 2 Req’d S-2 S-3
in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
SERIES SDAF231
SDAF23152 11 1?2 9 15?16 10 1?4 35 13 1?8 3 3?4 30 1?2 29 8 3?4 20 7?8 3 3?8 14 1?4 1 5?8 23152 NO52 P52 SDAF3152 A5679 ER832 ER845 1050
SDAF23156 12 1?2 10 3?4 12 38 1?4 14 3?4 3 3?8 33 1?2 32 3?4 9 23 7?16 4 3?4 15 7?8 1 5?8 23156 NO56 P56 SDAF3156 A8967 ER866 ER826 1250
SDAF23160 13 11 1?2 12 38 1?4 14 3?4 3 3?8 33 1?2 32 3?4 9 23 7?16 4 1?8 15 7?8 1 5?8 23160 NO60 P60 SDAF3160 A8975 ER824 ER832 1350
SDAF23164 14 12 1?4 12 13?16 41 3?4 15 3?4 4 1?2 36 1?2 35 10 1?2 25 3?4 4 3?8 16 3?4 1 7?8 23164 NO64 P64 SDAF3164 A8970 ER876 ER983 1850
SDAF23168 15 13 14 43 3?4 17 3?4 5 38 1?4 36 3?4 10 3?4 27 7?8 4 15?16 18 3?4 2 23168 NO68 P68 SDAF3168 A8977 ER847 ER846 2450
SDAF23172 16 13 13?16 14 1?2 46 17 1?8 5 1?4 40 3?4 39 1?4 11 28 7?8 5 18 2 23172 NO72 P72 SDAF3172 A8974 ER809 ER874 2500
SDAF23176 17 14 5?8 14 1?2 46 17 1?8 5 1?4 40 3?4 39 1?4 11 28 7?8 4 5?8 18 2 23176 NO76 P76 SDAF3176 A8978 ER811 ER946 2500
SDAF23180 17 1?2 15 1?4 15 1?2 48 3?4 18 3?4 5 1?2 43 1?2 41 3?4 12 1?4 30 1?2 5 1?8 19 3?4 2 1?4 23180 NO80 P80 SDAF3180 A8979 ER948 ER895 2800
SDAF23184 18 1?2 16 3?16 17 52 21 5 1?2 46 1?8 44 3?8 14 1?2 33 3?4 6 22 1?4 2 1?4 23184 NO84 P84 SDAF3184 A8984 ER949 ER914 4300
SDAF23188 19 1?2 17 17 52 21 5 1?2 46 1?8 44 3?8 14 1?2 33 3?4 5 9?16 22 1?4 2 1?4 23188 NO88 P88 SDAF3188 A8976 ER950 ER811 4300
SDAF23192 20 17 3?4 18 54 1?4 21 5?8 5 3?4 48 7?8 47 1?8 15 35 3?4 6 22 3?4 2 1?2 23192 NO92 P92 SDAF3192 A8990 ER808 ER953 5000
SERIES SDAF232
SDAF23248 10 1?2 9 3?16 10 1?4 35 13 1?8 3 3?4 30 1?2 29 8 3?4 20 7?8 3 9?16 14 1?4 1 5?8 23248 NO48 P48 SDAF3248 A5679 ER840 ER945 1100
SDAF23252 11 1?2 9 15?16 12 38 1?4 14 3?4 3 3?8 33 1?2 32 3?4 9 23 7?16 4 3?4 15 7?8 1 5?8 23252 NO52 P52 SDAF3252 A8968 ER832 ER845 1350
SDAF23256 12 1?2 10 3?4 12 38 1?4 14 3?4 3 3?8 33 1?2 32 3?4 9 23 7?16 4 3?8 15 7?8 1 5?8 23256 NO56 P56 SDAF3256 A8975 ER866 ER826 1400
SDAF23260 13 11 1?2 12 13?16 41 3?4 15 3?4 4 1?2 36 1?2 35 10 1?2 25 3?4 4 1?2 16 3?4 1 7?8 23260 NO60 P60 SDAF3260 A8970 ER846 ER856 1900
SDAF23264 14 12 1?4 14 43 3?4 17 3?4 5 38 1?4 36 3?4 10 3?4 27 7?8 5 1?8 18 3?4 2 23264 NO64 P64 SDAF3264 A8977 ER876 ER983 2500 SDAF23268 15 13 14 1?2 46 17 1?8 5 1?4 40 3?4 39 1?4 11 28 7?8 5 18 2 23268 NO68 P68 SDAF3268 A8978 ER847 ER846 2650
SDAF23272 16 13 13?16 15 1?2 48 3?4 18 3?4 5 1?2 43 1?2 41 3?4 12 1?4 30 1?2 5 1?2 19 3?4 2 1?4 23272 NO72 P72 SDAF3272 A8979 ER809 ER874 2950
SDAF23276 17 14 5?8 15 1?2 48 3?4 18 3?4 5 1?2 43 1?2 41 3?4 12 1?4 30 1?2 4 3?8 19 3?4 2 1?4 23276 NO76 P76 SDAF3276 A8980 ER811 ER946 3050
SDAF23280 17 1?2 15 1?4 17 52 21 5 1?2 46 1?8 44 3?8 14 1?2 33 3?4 6 22 1?4 2 1?4 23280 NO80 P80 SDAF3280 A8976 ER948 ER895 4500
SDAF23284 18 1?2 16 3?16 18 54 1?2 21 5?8 5 3?4 48 7?8 47 1?8 15 35 3?4 6 3?8 22 3?4 2 1?2 23284 NO84 P84 SDAF3284 A8990 ER955 ER951 5000
SDAF23288 19 1?2 17 18 54 1?2 21 5?8 5 3?4 48 7?8 47 1?8 15 35 3?4 5 7?8 22 3?4 2 1?2 23288 NO88 P88 SDAF3288 A8988 ER956 ER838 5050
(1) See page B395 for suggested shaft diameter S-2, S-3 tolerances.
(2) “Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings as required.
(3) Stabilizing ring is used for ?xed (FX) block; do not use for ?oat (FL) mounting.
Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
Caption:
•
B394 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearing Pillow Blocks
SHAFT DIAMETERS
SUGGESTED S-1, S-2, S-3 SHAFT DIAMETERS (INCHES)
max.
min.
max.
min.
1 7?16
1.4375
1.4345
7 1?4
7.2500
7.2450
B
1 11?16
1.6875
1.6845
7 7?16
7.4375
7.4325
1 7?8
1.8750
1.8720
7 5?8
7.6250
7.6200
1 15?16
1.9375
1.9345
7 13?16
7.8125
7.8075
2 1?16
2.0625
2.0585
7 15?16
7.9375
7.9325
2 1?8
2.1250
2.1210
8 5?16
8.3125
8.3065
2 3?16
2.1875
2.1835
8 3?8
8.3750
8.3690
2 1?4
2.2500
2.2460
8 7?16
8.4375
8.4315
2 3?8
2.3750
2.3710
8 1?2
8.5000
8.4940
2 7?16
2.4375
2.4335
8 3?4
8.7500
8.7440
2 9?16
2.5625
2.5585
8 15?16
8.9375
8.9315
2 5?8
2.6250
2.6210
9
9.0000
8.9940
2 11?16
2.6875
2.6835
9 7?16
9.4375
9.4315
2 13?16
2.8125
2.8085
9 1?2
9.5000
9.4940
2 7?8
2.8750
2.8710
9 9?16
9.5625
9.5565
2 15?16
2.9375
2.9335
9 15?16
9.9375
9.9315
3
3.0000
2.9960
10
10.0000
9.9940
3 1?16
3.0625
3.0585
10 7?16
10.4375
10.4305
3 3?16
3.1875
3.1835
10 1?2
10.5000
10.4930
3 1?4
3.2500
3.2460
10 15?16
10.9375
10.9305
3 3?8
3.3750
3.3710
11
11.0000
10.9930
3 7?16
3.4375
3.4335
11 7?16
11.4375
11.4305
3 5?8
3.6250
3.6210
11 1?2
11.5000
11.4930
3 15?16
3.9375
3.9335
11 15?16
11.9375
11.9305
4 1?8
4.1250
4.1200
12
12.0000
11.9930
4 3?16
4.1875
4.1825
12 7?16
12.4375
12.4295
4 7?16
4.4375
4.4325
12 1?2
12.5000
12.4920
4 1?2
4.5000
4.4950
12 15?16
12.9375
12.9295
4 9?16
4.5625
4.5575
13
13.0000
12.9920
4 7?8
4.8750
4.8700
13 7?16
13.4375
13.4295
4 15?16
4.9375
4.9325
13 1?2
13.5000
13.4920
5 3?16
5.1875
5.1825
13 15?16
13.9375
13.9295
5 5?16
5.3125
5.3075
14
14.0000
13.9920
5 7?16
5.4375
5.4325
15
15.0000
14.9920
5 3?4
5.7500
5.7450
16
16.0000
15.9920
5 7?8
5.8750
5.8700
17
17.0000
16.9920
Caption:
5 15?16
5.9375
5.9325
17 1?2
17.5000
17.4920
6 1?16
6.0625
6.0575
18 1?2
18.5000
18.4920
6 1?4
6.2500
6.2450
19 1?2
19.5000
19.4920
6 7?16
6.4375
6.4325
20
20.0000
19.9920
6 5?8
6.6250
6.6200
6 7?8
6.8750
6.8700
6 15?16
6.9375
6.9325
7
7.0000
6.9950
7 3?16
7.1875
7.1825
Triple lip seals for other shaft diameters are available upon special order.
TIMKEN PRODUCTS CATALOG B395
•
SPHERICAL ROLLER BEARINGS
Caption:
TU TAKE-UP UNITS
TU Take-Up Units
• The same care taken in the selection of stationary pillow blocks must be applied to selecting the proper take-up unit.
• Load requirements should be carefully evaluated before specifying a particular Timken take-up assembly.
• The pedestal is made of stress-relieved cast iron. End bases are made of ductile iron. The guide rail and screw are steel.
• Units are available with travel lengths from 12 to 36 inches, in 6-inch increments.
• Catalog numbers shown here are for the TU take-up unit only; pillow block assemblies must be ordered separately.
• Both two- and four-bolt pedestals are available and must be speci?ed.
B
B
A
H
K
TRAVEL
K
F = BOLT SIZE
G
C + TRAVEL
E
TU Take-Up
Pillow Block
A C
E
F
G
H
K
Unit
Housing Number
Bolt
Catalog
(SAF or SDAF)
Size
Number
in. in. in. in. in in. in.
TU-3x* 515L —
—
4 7?8 20 6 1?2 5?8 4
3?4
8 1?4
TU-4x* 516L — 517L 5
21 3?4 6 1?2 3?4 4
3?4
9 1?8
TU-5x* 518L — 615L 5 1?4 23 7 1?2 3?4 5
3?4
9 3?4
TU-6x* 520L — 617L 5 1?2 24 3?4 7 1?2 3?4 5
7?8
10 3?4
TU-7x* 522L 524L 620L 6
26 9
3?4
6 1?2 1 11 1?2
TU-8x* 526L — 622L 6
28 9
3?4
6 1?2 1 12 1?2
TU-8-1x* 528L — —
6
29 1?2 9
3?4
6 1?2 1 13 1?4
Caption:
* Enter 12, 18, 24, 30 or 36 to indicate travel in inches.
•
B396 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearing Pillow Blocks
TTU TAKE-UP UNITS
TTU Take-Up Units
• The same care taken in the selection of stationary pillow blocks must be applied to selecting the proper take-up unit.
• Load requirements should be carefully evaluated before specifying a particular take-up assembly.
• Frame assembly and adjusting screw of TTU units are made of steel.
• The bearing housing is cast iron. Steel or ductile iron housings are additional options.
• Units include housing for adapter mounted bearings only, for either ?xed or ?oat position (be sure to specify).
• One stabilizing ring is included for ?xed position assemblies.
• Sealing is triple ring labyrinth or end closures.
• For extremely contaminated environments, the DUSTAC seal is suggested. (See the next page for more information on DUSTAC.)
B
iron are available options.
A
A
R
LENGTH OF TRAVEL
R
FIXED END SHOWN WITH END ENCLOSURE PLATE
N SCREW SIZE
H
L
S-1
FLOAT END
A
D
F
E
C
B
T
SECTION A-A
Take-Up Unit Standard A B C D E F G H L N R T Bearing Adapter(3) Stabi- Triple Approx. and Frame Shaft(1) Bolt Number Assembly lizing(2) Seal Wt. Number Dia. Size Number Ring
(Travel in Bold) S-1 1 Req’d 2 Req’d
in. in. in. in. in. in. in. in. in. in. in. in. lbs.
TTU-55-12 1 15?16 4 5?8 28 1?2 3 1?2 1 3?4 26 1?2 - 5?8 9 4 3?4 7 1?4 4 22211K SNW-11 SR-11-0 LER24 55
TTU-55-18 4 5?8 34 1?2 3 1?2 1 3?4 32 1?2 - 5?8 9 4 3?4 7 1?4 4 22211K SNW-11 SR-11-0 LER24 60
TTU-55-24 4 5?8 40 1?2 3 1?2 1 3?4 38 1?2 - 5?8 9 4 3?4 7 1?4 4 22211K SNW-11 SR-11-0 LER24 65
TTU-65-12 2 3?16 5 29 1?2 3 1?2 1 3?4 27 1?2 - 5?8 10 4 1?2 3?4 7 3?4 4 22213K SNW-13 SR-13-0 LER29 60
TTU-65-18 5 35 1?2 3 1?2 1 3?4 33 1?2 - 5?8 10 4 1?2 3?4 7 3?4 4 22213K SNW-13 SR-13-0 LER29 65
TTU-65-24 5 41 1?2 3 1?2 1 3?4 39 1?2 - 5?8 10 4 1?2 3?4 7 3?4 4 22213K SNW-13 SR-13-0 LER29 70
TTU-75-6 2 7?16 5 3?16 24 1?2 3 1?2 1 3?4 22 1?2 - 3?4 10 1?2 4 1?2 7?8 8 1?4 4 22215K SNW-15 SR-15-0 LER37 65
TTU-75-12 5 3?16 30 1?2 3 1?2 1 3?4 28 1?2 - 3?4 10 1?2 4 1?2 7?8 8 1?4 4 22215K SNW-15 SR-15-0 LER37 70
TTU-75-18 5 3?16 36 1?2 3 1?2 1 3?4 34 1?2 - 3?4 10 1?2 4 1?2 7?8 8 1?4 4 22215K SNW-15 SR-15-0 LER37 75
TTU-75-24 5 3?16 42 1?2 3 1?2 1 3?4 40 1?2 - 3?4 10 1?2 4 1?2 7?8 8 1?4 4 22215K SNW-15 SR-15-0 LER37 80
TTU-75-30 5 3?16 48 1?2 3 1?2 1 3?4 46 1?2 - 3?4 10 1?2 4 1?2 7?8 8 1?4 4 22215K SNW-15 SR-15-0 LER37 85
TTU-85-6 2 15?16 6 26 1?2 4 5?8 2 24 1?2 2 5?8 12 1?4 4 3?4 1 9 1?4 5 22217K SNW-17 SR-17-14 LER53 95
TTU-85-12 6 32 1?2 4 5?8 2 30 1?2 2 5?8 12 1?4 4 3?4 1 9 1?4 5 22217K SNW-17 SR-17-14 LER53 100
TTU-85-18 6 38 1?2 4 5?8 2 36 1?2 2 5?8 12 1?4 4 3?4 1 9 1?4 5 22217K SNW-17 SR-17-14 LER53 105
TTU-85-24 6 44 1?2 4 5?8 2 42 1?2 2 5?8 12 1?4 4 3?4 1 9 1?4 5 22217K SNW-17 SR-17-14 LER53 110
TTU-85-30 6 50 1?2 4 5?8 2 48 1?2 2 5?8 12 1?4 4 3?4 1 9 1?4 5 22217K SNW-17 SR-17-14 LER53 115
TTU-100-12 3 7?16 6 5?8 34 1?4 4 5?8 2 32 2 3?4 13 7?8 6 1 1?8 10 5 1?2 22220K SNW-20 SR-20-17 LER102 140
TTU-100-18 6 5?8 40 1?4 4 5?8 2 38 2 3?4 13 7?8 6 1 1?8 10 5 1?2 22220K SNW-20 SR-20-17 LER102 145
TTU-100-24 6 5?8 46 1?4 4 5?8 2 44 2 3?4 13 7?8 6 1 1?8 10 5 1?2 22220K SNW-20 SR-20-17 LER102 150
TTU-100-30 6 5?8 52 1?4 4 5?8 2 50 2 3?4 13 7?8 6 1 1?8 10 5 1?2 22220K SNW-20 SR-20-17 LER102 155
TTU-110-12 3 15?16 7 3?4 38 1?2 5 5?8 2 1?4 36 2 1?2 3?4 16 1?4 6 1?2 1 1?4 12 7 22222K SNW-22 SR-22-19 LER109 200
TTU-110-18 7 3?4 44 1?2 5 5?8 2 1?4 42 2 1?2 3?4 16 1?4 6 1?2 1 1?4 12 7 22222K SNW-22 SR-22-19 LER109 210
TTU-110-24 7 3?4 50 1?2 5 5?8 2 1?4 48 2 1?2 3?4 16 1?4 6 1?2 1 1?4 12 7 22222K SNW-22 SR-22-19 LER109 220
TTU-110-30 7 3?4 56 1?2 5 5?8 2 1?4 54 2 1?2 3?4 16 1?4 6 1?2 1 1?4 12 7 22222K SNW-22 SR-22-19 LER109 230
TTU-110-36 7 3?4 62 1?2 5 5?8 2 1?4 60 2 1?2 3?4 16 1?4 6 1?2 1 1?4 12 7 22222K SNW-22 SR-22-19 LER109 240
TTU-130-12 4 7?16 8 5?8 45 3?4 8 3?4 2 3?4 40 3?4 5 1 1?8 18 7?8 7 1?4 2 14 3?8 10 22226K SNW-26 SR-26-0 LER117 360
TTU-130-18 8 5?8 51 3?4 8 3?4 2 3?4 46 3?4 5 1 1?8 18 7?8 7 1?4 2 14 3?8 10 22226K SNW-26 SR-26-0 LER117 380
TTU-130-24 8 5?8 57 3?4 8 3?4 2 3?4 52 3?4 5 1 1?8 18 7?8 7 1?4 2 14 3?8 10 22226K SNW-26 SR-26-0 LER117 400
TTU-130-30 8 5?8 63 3?4 8 3?4 2 3?4 58 3?4 5 1 1?8 18 7?8 7 1?4 2 14 3?8 10 22226K SNW-26 SR-26-0 LER117 420
TTU-140-12 4 15?16 9 1?2 49 1?2 9 3?4 3 44 1?2 5 1?2 1 1?4 20 3?8 7 1?2 2 1?4 16 1?4 11 22228K SNW-28 SR-28-0 LER122 460
TTU-140-18 9 1?2 55 1?2 9 3?4 3 50 1?2 5 1?2 1 1?4 20 3?8 7 1?2 2 1?4 16 1?4 11 22228K SNW-28 SR-28-0 LER122 480
TTU-140-24 9 1?2 61 1?2 9 3?4 3 56 1?2 5 1?2 1 1?4 20 3?8 7 1?2 2 1?4 16 1?4 11 22228K SNW-28 SR-28-0 LER122 510
TTU-140-30 9 1?2 67 1?2 9 3?4 3 62 1?2 5 1?2 1 1?4 20 3?8 7 1?2 2 1?4 16 1?4 11 22228K SNW-28 SR-28-0 LER122 530
(1) See page B395 for suggested shaft diameter S-1 tolerances.
Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
(2) Stabilizing ring is used for ?xed (FX) block; do not use for ?oat (FL) mounting.
(3) Includes sleeve, locknut and lockwasher. Add shaft size to order.
Caption:
TIMKEN PRODUCTS CATALOG B397
•
Caption:
SPHERICAL ROLLER BEARINGS
DUSTAC™ SHAFT SEAL
• Suggested for pillow blocks used in extremely contaminated environments, such as taconite mines.
• Provides protection against residual and airborne contaminants that exceeds the triple labyrinth shaft seal.
• Contributes signi?cantly to extending bearing life; reduces costs by helping prevent premature bearing damage.
• Because of its unique design, no special ?nish is required on the shaft. DUSTAC is a patented device utilizing a V-shaped nitrile ring, which rotates with the shaft and applies pressure to the cartridge face to exclude contaminates.
8. On each shaft there must be only one ?xed bearing. If bearing is to be ?xed, the stabilizing ring can be inserted between the bearing outer ring and the housing shoulder on the locknut side of the bearing. All other bearings on this shaft should be centered in the housing.
9. The upper half of the housing or cap should be thoroughly cleaned and checked for burrs. Place it over the bearing and seals. The dowel pins will align the cap to the base. NOTE: housing caps and bases are not interchangeable.
10. After cap bolts are tightened, it is most important to position the V-ring seal to its proper ?tted width. This is accomplished by moving the seal until it is ?ush with the outside face of the cavity. This provides proper compression of the lip against the cartridge face.
B
B
Pillow Block
Shaft Assembly
DUSTAC™ V-Ring
O-Ring
End
Housing Number
Diameter Standout
Seal
Seal
Plug
500 600
S-1
B
Assembly
515
615
2 7?16
59?64
DV-37
V-60-A
2-228
EPS-4
516
616
2 11?16
59?64
DV-44
V-65-A
2-231
EPS-5
517
—
2 15?16
1
DV-53
V-75-A
2-230
EPS-6
518
—
3 3?16
1
DV-69
V-80-A
2-235
EPS-9
520
620
3 7?16
1
DV-102
V-85-A
2-234
EPS-11
522
622
3 15?16
1
DV-109
V-100-A
2-239
EPS-13
524
624
4 3?16
1 1?16
DV-113
V-110-A
2-238
EPS-14
526
626
4 7?16
1 1?16
DV-117
V-110-A
2-242
EPS-15
528
628
4 15?16
1 1?16
DV-122
V-130-A
2-244
EPS-16
530
630
5 3?16
1 1?16
DV-125
V-130-A
2-247
EPS-17
532
632
5 7?16
1 1?16
DV-130
V-140-A
2-249
EPS-18
534
634
5 15?16
1 1?16
DV-140
V-150-A
2-253
EPS-20
536
636
6 7?16
1 9?64
DV-148
V-160-A
2-259
EPS-21
538
638
6 15?16
1 9?64
DV-155
V-180-A
2-259
EPS-22
540
640
7 3?16
1 9?64
DV-159
V-180-A
2-259
EPS-23
544
—
7 15?16
1 15?32
DV-167
V-200-A
2-262
EPS-25
ORDER INSTRUCTIONS
• Shaft seal may be ordered in place of the standard LER triple ring seals supplied with the pillow blocks listed. They also are available to retro?t existing installations.
• To order any pillow block housings with DUSTAC shaft seal on both sides, add the suf?x “DV” to the number (e.g., SAF2522DV).
• To order pillow block housings with DUSTAC shaft seal and one end closed, add the suf?x “DC” to the number (e.g., SAF22522DC).
• Standard sizes of DUSTAC shaft seals are shown in the table. Other sizes are available upon request.
INSTALLATION PROCEDURE
1. Check shaft diameters to print speci?cation. Remove any burrs or sharp edges. Be sure shaft surface is clean and dry beyond the area of seal location.
2. Expand the V-ring seal over the shaft to the approximate inboard position (reference dimension “B” in the tables). Make sure the lip of the seal faces the bearing.
3. Slide the seal cartridge onto the shaft until the V-ring ?ts into its cavity.
4. Mount the bearing, sleeve, lockwasher and locknut in normal manner and adjust for internal clearance.
5. If both ends have seals, repeat steps 2 and 3 with the V-ring going on last with its lip facing the bearing.
6. Thoroughly clean the housing base and remove any paint or burrs from the mating surfaces of the housing cap.
7. Lower shaft, bearing and seals into the housing base, taking care to guide the seals into the seal grooves.
DUSTAC™ Shaft Seal
Caption:
DUSTACTM Design Features
Standard SAF HOUSING
COMPRESSED NEOPRENE RING - To seal cartridge and prevent rotation (of V-ring casting).
Close running clearance seal
GREASE FITTING To purge seal surface
V- Ring seal protected against mechanical damage (cast iron).
Grease cavity to trap contaminants
S-1
V-RING FACE SEAL
Mounted on shaft and rotates with the shaft. Particles are deflected from the sealing point due to the rotation of the V-Ring face seal.
B
•
B398 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearing Pillow Blocks
Taconite Seals
TORR-GARD SEALS
• Using the TORR-GARD greatly increases the operating time between maintenance intervals of rotating equipment.
• Used in split pillow blocks.
• Endures extreme environments such as pulp and paper, chemical and mining because of its exceptional design.
• Two-piece labyrinth seal of Te?on® PTFE ?uoropolmer resin. The assembly inhibits the passage of contaminants or lubricants and prevents the components from coming apart during installation and service.
• Installation is simple compared to many other lip-contact type seals and is more effective in reducing lubricant loss, improving plant safety. It is also environmentally friendly.
OTHER BENEFITS INCLUDE:
• Drop-in style eliminates machining or modi?cation to housing.
• Interchangeable with LER or Taconite seals.
• Available for standard SAF and SNH pillow blocks (1 3/4 in. to 8 in. shaft diameter).
• Minimizes lubricant leakage.
• Accommodates greater shaft misalignment or eccentricity.
• Reduced number of components over conventional seals.
D STANDOUT
B O.D.
C
A
BORE
B
TACONITE SEALS
FTV SERIES
FLINGER TACONITE SEAL WITH V RING
• Combines the qualities of the face labyrinth seal and the DUSTAC seal to improve the sealing ef?ciency for extremely contaminated environments.
• The rotating ?inger, added to the basic design, incorporates face labyrinth grooves and compressing the O-ring in the bore. This protects against incursion of foreign matters and ensures regular pressure of the V-ring to the cartridge face.
FTL SERIES
FLINGER TACONITE SEAL WITH LIP SEAL
• The FTL seal has the same property as the FTV Series, but above the V-ring is substituted to a lip seal working directly on the Flinger Lip to prevent the shaft of any grooving.
• The FTV and FTL Taconite seals can be substituted in either ER or LER ring SAF pillow block series and do not require modi?cations to the standard housings.
• NOTE: Flinger Taconite seals can be substituted to “ER” or “LER” seal. Add the suf?x “L” to the number when it is for a housing using LER Seals (e.g., TFV-515L for SAF-515L pillow block).
Caption:
FTL
FTV
TIMKEN PRODUCTS CATALOG B399
•
SPHERICAL ROLLER BEARINGS
Caption:
SINE BAR GAGES
3
4 4 5
1
• Tapered bore, anti-friction bearings are mounted either on adapter sleeves or on tapered shaft seats.
• In cases where tapered bore bearings are mounted directly on the shaft, the shaft must conform to the tapered bore of the bearing to assure proper ?t. If proper ?t is not achieved, the results could be:
1. Turning of the bearing inner race on the shaft.
2. Uneven loading of the bearing.
3. Severe inner race hoop stress.
4. Insuf?cient support (back-up) of the inner race on the shaft.
• All of these conditions could lead to premature bearing damage. Therefore, the manufacture, maintenance and measurement of accurate shaft tapers is important.
• There are two accepted ways of measuring tapered shafts: ring gages and sine bar gages.
• Precision measurement of tapered shafts is dif?cult with ring gages and may be impossible in the case of large shafts, where gages are large, cumbersome and heavy.
• Sine bar gages provide an accurate and easy method of measurement.
• Lightweight and easy to handle and learn, sine bar gages achieve precise gaging of the shaft size and taper.
• A complete set for measurement of 1:12 shaft tapers consists of 3 in., 4 in., 5 1/2 in., 7 in., 10 in. and 14 in. sine bar gages, sine bar saddle no. T-5491-C, web clamp no. T-5489-A and a wooden box no. T-5224-C. A complete set for 1:30 shaft tapers consists of 4 in., 6 in., 8 in. and 12 in. sine bar gages.
• Sine bars can be purchased individually, or in any combination of sizes to meet your individual needs.
• All sine bars require a sine bar saddle and web clamp. A wooden box is optional.
• For information on the use of sine bars, prices and delivery, consult your Timken representative.
2
B
B
1 Saddle
2 Sine Bar
3 Web Clamp
4 Locking Screws
5 Micrometer ( not included )
PART NUMBER SIZE INCH FOR BEARINGS
PART NUMBER SIZE INCH FOR BEARINGS
T-3071-C
3.0000
22232K to 22240K
T-3074-C
7.0000
230/530K to 230/750K
T-3071-C
3.0000
22322K to 22328K
T-3074-C
7.0000
23168K to 23196K
T-3071-C
3.0000
23040K to 23048K
23260K to 23276K 239/750K to 239/1120K
T-3074-C
7.0000
Caption:
T-3071-C
3.0000
23130K to 23136K
23226K to 23230K 23960K to 23972K
T-3071-C
3.0000
T-3075-C
10.0000
230/800K to 230/1180
T-3075-C
10.0000
231/500K to 231/710K
T-3072-C
4.0000
23280K to 232/530K 230/1250 and up
22248K to 22256K
T-3075-C
10.0000
T-3072-C
4.0000
22330K to 22340K
T-3072-C
4.0000
23052K to 23076K
T-3076-C
14.0000
231/750K and up
T-3072-C
4.0000
23138K to 23148K
T-3076-C
14.0000
23232K to 23240K 23976K to 239/560K
T-3072-C
4.0000
232/560K and up 239/118K and up
T-5476-C
4.0000
24040K to 24056K
T-3073-C
5.5000
22260K to 22264K
T-5476-C
4.0000
24132K to 24144K
T-3073-C
5.5000
22344K to 22356K
T-3073-C
5.5000
23080K to 230/500K
T-5477-C
6.0000
24060K to 24084K
T-3073-C
5.5000
23152K to 23164K
T-5477-C
6.0000
24148K to 24160K
23244K to 23256K 239/600K to 239/710K
Note: All sine bars require a sine bar saddle, T-5491-C and a web clamp T-5489-A.
T-3073-C
5.5000
T-5478-C
8.0000
24089K to 240/630K
T-5478-C
8.0000
24164K to 24192K
T-5479-C
12.0000
240/670K and up
24196K and up
The table above represents the sine bar sizes developed for a full range
of tapered bore bearings with 1:12 and a 1:30 taper. Additional sizes are available to ?t a variety of width and taper combinations. Consult your local Timken representative for availability.
T-5479-C
12.0000
•
B400 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearing Pillow Blocks
HYDRAULIC NUTS
INTRODUCTION
• Designed to install and remove tapered bore bearings with minimal effort.
• Allow better control of the bearing internal clearance reduction without damaging the bearing or other components.
• Substantially reduces downtime during installation or removal of tapered bore bearings.
DESCRIPTION
• Consist of a female threaded ring and a male ring with two O-ring seals.
• All hydraulic nuts are supplied with:
- Quick connection ?ttings (male ¼ in. B.S.P. and female 3/8 in. N.P.T.).
- Two pipe plugs ¼” B.S.P.
- One set of spare O-rings.
ORDERING COMPONENTS:
• To order spare components for the hydraulic nuts, order part numbers as listed below:
- O-ring Seal Kits:
Use the hydraulic nut part number plus the number 132.
Example: HMVC 40/132
- Pipe Plug ¼ in. B.S.P.:
Use the hydraulic nut part number plus the number 647.
Example: HMVC 40/647
- Quick Connection Fittings (male ¼ in. B.S.P. and female 3/8 in. N.P.T.):
Use the hydraulic nut part number plus the number 849.
Example: HMVC 40/849
ENGINEERING SERVICES
• Special applications should be referred to a Timken representative for review.
B
INSTRUCTIONS
• When the hydraulic nut is used, the piston must be in the innermost position.
• For this operation, please ensure that the valve of the hydraulic hose is disconnected from the nut so that the nut is not under pressure.
• To contract the piston inside the female threaded ring, insert a rod or bar in one of the four drilled holes located on the outside diameter of the female threaded ring.
• Screw the hydraulic nut on the thread with the piston in contact with the surface, until the groove machined on the outside diameter of the piston near the outboard face is level with the face of the female threaded ring.
• One of the two threaded holes must be plugged with the ¼” B.S.P. pipe plug before the hydraulic nut is pressurized.
• The maximum pressure permissible in the hydraulic nut is 14,000 psi (110 Kpa).
• The oil viscosity suggested is 1400 SUS (300cst) at operating temperature (SAE 90 oil).
• To avoid overextension of the piston, a second groove has been machined on the outside diameter of the piston inboard of the one used to judge contraction.
• When this second groove is level with the face of the female threaded ring, the piston has reached its length of travel as shown in the illustration. If the second groove of the piston travels past the face of the female threaded ring the hydraulic nut can be damaged.
• Should the oil start to leak from the piston area, it is certain that the O-ring seals are damaged or worn and need to be replaced.
• When the hydraulic nut is not in use, ensure that the threaded holes are plugged to prevent entry of contaminants in the piston cavity.
• To help prevent against corrosion during storage, apply a coat of light oil on the hydraulic nut surfaces.
• Contact your Timken representative to receive special warnings against reasonably unforeseen dangers.
INSTALLATION
Hydraulic nut used to mount the bearing on a pull type sleeve.
Hydraulic nut used to mount the bearing on tapered journal.
Hydraulic nut used to mount the bearing on a push type adapter sleeve.
REMOVAL
Hydraulic nut used to withdraw a push type adapter sleeve.
Caption:
TIMKEN PRODUCTS CATALOG B401
•
SPHERICAL ROLLER BEARINGS
Caption:
HYDRAULIC NUTS – METRIC
Part Number Threads
Dimensions
Piston Length Piston Assembly
B
C
D
E
E1
A of Travel Area weight
mm mm mm
mm
mm
mm
mm
mm2 kg.
HMV - 10 M 50X1.5 114 38
86
51
4
5
2900
2.5
HMV - 12 M 60X2 125 38
94
61
5
5
3200
2.8
HMV - 13 M 65X2 135 38
101
66
5
5
3500
3.0
B
B
HMV - 14 M 70X2 140 38
107
71
5
5
3900
3.3
HMV - 15 M 75X2 145 38
112
76
5
5
4100
3.5
HMV - 16 M 80X2 150 38
117
81
5
5
4200
3.8
HMV - 17 M 85X2 155 38
122
86
5
5
4400
3.9
HMV - 18 M 90X2 160 38
127
91
5
5
4800
4.1
HMV - 19 M 95X2 165 38
133
96
5
5
5000
4.4
HMV - 20 M 100X2 170 38
138
101
6
5
5200
4.5
HMV - 21 M 105X2 175 38
143
106
6
5
5400
5.4
HMV - 22 M 110X2 180 38
149
111
6
5
5700
5.7
HMV - 23 M 115X2 185 38
154
116
6
5
5900
5.1
HMV - 24 M 120X2 190 38
159
121
6
5
6100
5.3
HMV - 25 M 125X2 195 38
164
126
6
5
6300
5.4
HMV - 26 M 130X2 200 38
170
131
6
5
6500
5.7
HMV - 27 M 135X2 205 38
175
136
6
5
6700
5.9
HMV - 28 M 140X2 210 38
180
141
7
5
6900
6.1
HMV - 29 M 145X2 215 39
186
146
7
5
7300
6.5
HMV - 30 M 150X2 220 39
190
151
7
5
7500
6.6
HMV - 31 M 155X3 225 39
198
156
7
5
8100
6.9
HMV - 32 M 160X3 235 40
206
161
7
6
8600
7.7
HMV - 33 M 165X3 240 40
209
166
7
6
9000
8.0
HMV - 34 M 170X3 245 41
215
171
7
6
9500
8.4
HMV - 36 M 180X3 255 41
227
181
7
6
10300
9.1
HMV - 38 M 190X3 270 42
239
191
8
7
11500 10.8
HMV - 40 M 200X3 280 43
251
201
8
8
12500 11.4
HMV - 41 Tr 205X4 290 43
256
207
8
8
12900 12.2
HMV - 42 Tr 210X4 295 44
262
212
8
9
13500 12.5
HMV - 43 Tr 215X4 300 44
267
217
8
9
13800 13.0
HMV - 44 Tr 220X4 305 44
273
222
8
9
14400 13.4
HMV - 45 Tr 225X4 315 45
280
227
8
9
15200 14.6
HMV - 46 Tr 230X4 320 45
285
232
8
9
15600 14.8
HMV - 47 Tr 235X4 325 46
291
237
8
10
16200 16.0
HMV - 48 Tr 240X4 330 46
296
242
9
10
16500 16.3
HMV - 50 Tr 250X4 345 46
307
252
9
10
17800 17.6
HMV - 52 Tr 260X4 355 47
319
262
9
11
18800 19.0
HMV - 54 Tr 270X4 370 48
330
272
9
12
19700 20.4
HMV - 56 Tr 280X4 380 49
341
282
9
12
21100 22.0
HMV - 58 Tr 290X4 390 49
353
292
9
13
22600 22.5
HMV - 60 Tr 300X4 405 51
364
302
10
14
23600 25.6
HMV - 62 Tr 310X5 415 52
375
312
10
14
24900 27.0
HMV - 64 Tr 320X5 430 53
387
322
10
14
26300 29.6
HMV - 66 Tr 330X5 440 53
397
332
10
14
27000 31.0
HMV - 68 Tr 340X5 450 53
408
342
10
14
28400 32.5
HMV - 69 Tr 345X5 455 54
414
347
10
14
29400 33.6
HMV - 70 Tr 350X5 465 56
420
352
10
14
30000 35.0
HMV - 72 Tr 360X5 475 56
431
362
10
15
31300 37.0
HMV - 73 Tr 365X5 482 57
436
367
11
15
31700 38.5
HMV - 74 Tr 370X5 490 57
442
372
11
16
32800 39.2
HMV - 76 Tr 380X5 500 58
452
382
11
16
33600 41.0
HMV - 77 Tr 385X5 505 58
459
387
11
16
34700 42.0
HMV - 80 Tr 400X5 525 60
475
402
11
17
36700 46.0
HMV - 82 Tr 410X5 535 61
486
412
11
17
38300 48.2
HMV - 84 Tr 420X5 545 61
498
422
11
17
40000 50.4
Caption:
HMV - 86 Tr 430X5 555 62
508
432
11
17
40800 53.0
HMV - 88 Tr 440X5 565 62
519
442
12
17
42500 55.0
HMV - 90 Tr 450X5 580 64
530
452
12
17
44100 58.2
HMV - 92 Tr 460X5 590 64
541
462
12
17
45000 61.0
HMV - 94 Tr 470X5 600 65
552
472
12
18
46900 63.7
HMV - 96 Tr 480X5 612 65
563
482
12
19
48500 65.0
HMV - 98 Tr 490X5 625 66
573
492
12
19
49800 69.0
HMV - 100 Tr 500X5 635 67
585
502
12
19
52000 71.5
HMV - 102 Tr 510X6 645 68
596
512
12
20
53300 75.0
HMV - 104 Tr 520X6 657 68
606
522
13
20
54200 77.0
HMV - 106 Tr 530X6 670 69
617
532
13
21
56200 80.0
HMV - 108 Tr 540X6 680 69
629
542
13
21
58200 83.0
HMV - 110 Tr 550X6 692 70
639
552
13
21
59200 86.0
HMV - 112 Tr 560X6 705 71
650
562
13
22
61200 90.0
HMV - 114 Tr 570X6 715 72
661
572
13
23
63200 93.0
HMV - 116 Tr 580X6 725 72
671
582
13
23
64200 96.0
HMV - 120 Tr 600X6 750 73
693
602
13
23
67400 100.0
HMV - 126 Tr 630X6 780 74
726
632
14
23
72900 110.0
HMV - 130 Tr 650X6 805 75
747
652
14
23
76200 116.0
HMV - 134 Tr 670X6 825 76
768
672
14
24
79500 123.0
HMV - 138 Tr 690X6 850 77
791
692
14
25
84200 130.0
HMV - 142 Tr 710X7 870 78
812
712
15
25
87700 137.0
HMV - 150 Tr 750X7 915 79
855
752
15
25
97000 150.0
HMV - 160 Tr 800X7 970 80
908
802
16
25 104000 173.0
HMV - 170 Tr 850X7 1020 83
962
852
16
26 114600 190.0
HMV - 180 Tr 900X7 1070 86
1015
902
17
30 124000 210.0
HMV - 190 Tr 950X8 1125 86
1069
952
17
30 135600 238.0
HMV - 200 Tr 1000X8 1180 88
1122
1002
17
34 145600 263.0
HMV - 212 Tr 1060X8 1255 95
1184
1063
18
34 161200 325.0
HMV - 216 Tr 1080X8 1280 100
1206
1083
18
34 167400 345.0
HMV - 224 Tr 1120X8 1340 106
1250
1123
19
36 178200 410.0
HMV - 236 Tr 1180X8 1420 115
1320
1183
22
40 189200 530.0
HMV - 10 through HMV - 40 have a Metric ISO ?ne thread pro?le. HMV - 41 through HMV-236 have a Metric ISO trapezoidal thread.
•
B402 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearing Pillow Blocks
HYDRAULIC NUTS – ENGLISH
Caption:
HMVC - 10 1.967 18 4.488 1.496 3.386 2.008 0.157 0.197 4.5 5.5 HMVC - 12 2.360 18 4.921 1.496 3.701 2.402 0.197 0.197 5.0 6.2 HMVC - 13 2.548 18 5.315 1.496 3.976 2.598 0.197 0.197 5.4 6.6 HMVC - 14 2.751 18 5.512 1.496 4.213 2.795 0.197 0.197 6.0 7.3 HMVC - 15 2.933 12 5.709 1.496 4.409 2.992 0.197 0.197 6.3 7.7 HMVC - 16 3.137 12 5.906 1.496 4.606 3.189 0.197 0.197 6.5 8.4 HMVC - 17 3.340 12 6.102 1.496 4.803 3.386 0.197 0.197 6.8 8.6 HMVC - 18 3.527 12 6.299 1.496 5.000 3.583 0.197 0.197 7.4 9.0 HMVC - 19 3.730 12 6.496 1.496 5.236 3.780 0.197 0.197 7.7 9.7 HMVC - 20 3.918 12 6.693 1.496 5.433 3.976 0.236 0.197 8.1 10.0 HMVC - 44 8.628 8 12.008 1.732 10.748 8.740 0.315 0.354 22.3 29.5 HMVC - 48 9.442 6 12.992 1.811 11.654 9.528 0.354 0.394 25.6 35.9 HMVC - 52 10.192 6 13.976 1.850 12.559 10.315 0.354 0.433 29.1 41.8 HMVC - 56 11.004 6 14.961 1.929 13.425 11.102 0.354 0.472 32.7 48.4 HMVC - 60 11.785 6 15.945 2.008 14.331 11.890 0.394 0.551 36.6 56.3 HMVC - 64 12.562 6 16.929 2.087 15.236 12.677 0.394 0.551 40.8 65.1 HMVC - 68 13.334 5 17.717 2.087 16.063 13.465 0.394 0.551 44.0 71.5 HMVC - 72 14.170 5 18.701 2.205 16.969 14.252 0.394 0.590 48.5 81.4 HMVC - 76 14.957 5 19.685 2.283 17.795 15.039 0.433 0.630 52.1 90.2 HMVC - 80 15.745 5 20.669 2.362 18.701 15.827 0.433 0.669 56.9 101.2
HMVC - 142 27.961 3 34.252 3.071 31.969 28.031 0.590 0.984 135.9 301.4 HMVC - 150 29.536 3 36.024 3.110 33.661 29.606 0.590 0.984 150.4 330.0 HMVC - 160 31.504 3 38.189 3.150 35.748 31.575 0.630 0.984 161.2 380.6 HMVC - 170 33.473 3 40.157 3.268 37.874 33.543 0.630 1.024 177.6 418.0 HMVC - 180 35.441 3 42.126 3.386 39.960 35.511 0.669 1.181 192.2 462.0 HMVC - 190 37.410 3 44.291 3.386 42.087 37.480 0.669 1.181 210.2 523.6 HMVC - 10 through HMVC - 64 have American National Threads Class 3.
HMVC -68 through HMVC-190 have Acme General Purpose Threads Class 3G.
TIMKEN PRODUCTS CATALOG B403
B
Part Number B Threads
Maj. Dia. no. per inch C
Piston Length Piston Assembly
A of Travel Area weight
Dimensions
D
E
E1
inch inch inch inch inch inch inch lbs.
HMVC - 22 4.325 12 7.087 1.496 5.866 4.370 0.236 0.197 8.8 12.5 HMVC - 24 4.716 12 7.480 1.496 6.260 4.764 0.236 0.197 9.5 11.7 HMVC - 26 5.106 12 7.874 1.496 6.693 5.157 0.236 0.197 10.1 12.5 HMVC - 28 5.497 12 8.268 1.496 7.087 5.551 0.276 0.197 10.7 13.4 HMVC - 30 5.888 12 8.661 1.535 7.480 5.945 0.276 0.197 11.6 14.5 HMVC - 32 6.284 8 9.252 1.575 8.110 6.339 0.276 0.236 13.3 17.0 HMVC - 34 6.659 8 9.645 1.614 8.465 6.732 0.276 0.236 14.7 18.5 HMVC - 36 7.066 8 10.039 1.615 8.858 7.126 0.276 0.236 16.0 20.0 HMVC - 38 7.472 8 10.630 1.653 9.409 7.520 0.315 0.276 17.8 23.1 HMVC - 40 7.847 8 11.024 1.693 9.882 7.913 0.315 0.276 19.4 25.1
Caption:
HMVC - 84 16.532 5 21.457 2.401 19.606 16.614 0.433 0.669 62.0 110.9 HMVC - 88 17.319 5 22.244 2.441 20.433 17.402 0.472 0.669 65.9 121.0 HMVC - 92 18.107 5 23.228 2.520 21.299 18.189 0.472 0.669 69.8 134.2 HMVC - 96 18.894 5 24.094 2.559 22.165 18.976 0.472 0.748 75.2 143.0 HMVC - 100 19.682 5 25.000 2.598 23.031 19.764 0.472 0.748 80.6 157.3 HMVC - 106 20.867 4 26.378 2.716 24.291 20.945 0.512 0.827 87.1 176.0 HMVC - 112 21.923 4 27.756 2.795 25.591 22.126 0.512 0.866 94.9 198.0 HMVC - 120 23.623 4 29.528 2.874 27.283 23.701 0.512 0.905 104.5 220.0 HMVC - 126 24.804 4 30.709 2.913 28.583 24.882 0.551 0.905 113.0 242.0 HMVC - 134 26.379 4 32.480 2.992 30.236 26.457 0.551 0.945 123.2 270.6
•
Caption:
SPHERICAL ROLLER BEARINGS
S
Caption:
D1
SHAFT ADAPTER ACCESSORIES FOR TAPERED BORE BEARINGS
SNW?SNP - PULL TYPE SLEEVE, LOCKNUT, LOCKWASHER/LOCKPLATE ASSEMBLIES
B
• The table below shows dimensions for adapter assemblies and components used in the mounting of tapered bore bearings on shafts.
• SNW assembly consists of a sleeve, locknut and lockwasher.
• SNP assembly consists of a sleeve, locknut and lockplate.
d
B
B2
Tapered bore bearing plus SNW.
Bearing Number
Accessory Numbers
Shaft
Adapter Dimensions
SNW/SNP
Dimensions
Assembly
Assembly Sleeve Locknut Lockwasher Tolerance B2 S D1 Weight Lockplate d +.000"
Diameter 0
in. in. in. in. in. lbs.
SERIES 222K
22209K
SNW-09 S-09 N-09 W-09 1 7?16 -.003 1 37?64 1?2 2 17?32 0.6
22210K
SNW-10 S-10 N-10 W-10 1 11?16 -.003 1 49?64 9?16 2 11?16 0.7
22211K
SNW-11 S-11 N-11 W-11 1 15?16 -.003 1 27?32 9?16 2 31?32 0.8
22212K
SNW-12 S-12 N-12 W-12 2 1?16 -.004 1 63?64 19?32 3 5?32 1.1
22213K
SNW-13 S-13 N-13 W-13 2 3?16 -.004 2 3?32 5?8 3 3?8 1.4
22214K
SNW-14 S-14 N-14 W-14 2 5?16 -.004 2 11?64 5?8 3 5?8 1.8
22215K
SNW-15 S-15 AN-15 W-15 2 7?16 -.004 2 19?64 43?64 3 7?8 2.0
22216K
SNW-16 S-16 AN-16 W-16 2 11?16 -.004 2 3?8 43?64 4 5?32 2.4
22217K
SNW-17 S-17 AN-17 W-17 2 15?16 -.004 2 31?64 45?64 4 13?32 3.0
22218K
SNW-18 S-18 AN-18 W-18 3 3?16 -.004 2 41?64 25?32 4 21?32 3.0
22219K
SNW-19 S-19 AN-19 W-19 3 5?16 -.004 2 49?64 13?16 4 15?16 3.3
22220K
SNW-20 S-20 AN-20 W-20 3 7?16 -.004 2 7?8 27?32 5 3?16 4.4
22222K
SNW-22 S-22 AN-22 W-22 3 15?16 -.004 3 13?64 29?32 5 23?32 5.0
22224K
SNW-24 S-24 AN-24 W-24 4 3?16 -.005 3 15?32 15?16 6 1?8 6.7
22226K
SNW-26 S-26 AN-26 W-26 4 7?16 -.005 3 49?64 1 6 3?4 8.6
22228K
SNW-28 S-28 AN-28 W-28 4 15?16 -.005 3 63?64 1 1?16 7 3?32 10.3
22230K
SNW-30 S-30 AN-30 W-30 5 3?16 -.005 4 15?64 1 1?8 7 11?16 13.5
22232K
SNW-32 S-32 AN-32 W-32 5 7?16 -.005 4 37?64 1 3?16 8 1?16 15.6
22234K
SNW-34 S-34 AN-34 W-34 5 15?16 -.005 4 27?32 1 7?32 8 21?32 19.4
22236K
SNW-36 S-36 AN-36 W-36 6 7?16 -.005 5 1?32 1 1?4 9 1?16 20.5
Caption:
22238K
SNW-38 S-38 AN-38 W-38 6 15?16 -.005 5 17?64 1 9?32 9 15?32 23.4
22240K
SNW-40 S-40 AN-40 W-40 7 3?16 -.005 5 31?64 1 11?32 9 27?32 30.5
22244K
SNW-44 S-44 N-044 W-44 7 15?16 -.005 5 29?32 1 3?8 11 33.0
SERIES 230K
23024K
SNW-3024 S-3024 N-024 W-024 4 3?16 -.005 2 61?64 13?16 5 11?16 6.1
23026K
SNW-3026 S-3026 N-026 W-026 4 7?16 -.005 3 15?64 7?8 6 1?8 7.5
23028K
SNW-3028 S-3028 N-028 W-028 4 15?16 -.005 3 11?32 15?16 6 1?2 8.4
23030K
SNW-3030 S-3030 N-030 W-030 5 3?16 -.005 3 31?64 31?32 7 1?8 9.8
23032K
SNW-3032 S-3032 N-032 W-032 5 7?16 -.005 3 23?32 1 1?32 7 1?2 11.8
23034K
SNW-3034 S-3034 N-034 W-034 5 15?16 -.005 4 1?64 1 1?16 7 7?8 13.3
23036K
SNW-3036 S-3036 N-036 W-036 6 7?16 -.005 4 11?32 1 3?32 8 1?4 15.2
23038K
SNW-3038 S-3038 N-038 W-038 6 15?16 -.005 4 13?32 1 1?8 8 11?16 16.7
23040K
SNW-3040 S-3040 N-040 W-040 7 3?16 -.005 4 3?4 1 3?16 9 7?16 19.7
23044K
SNW-3044 S-3044 N-044 W-044 7 15?16 -.005 5 1?8 1 1?4 10 1?4 24.4
23048K
SNP-3048 S-3048 N-048 P-48 8 15?16 -.006 5 7?16 1 11?32 11 7?16 32.2
23052K
SNP-3052 S-3052 N-052 P-52 9 7?16 -.006 6 1?64 1 13?32 12 3?16 41.1
23056K
SNP-3056 S-3056 N-056 P-56 10 7?16 -.007 6 3?16 1 1?2 13 45.4
23060K
SNP-3060 S-3060 N-060 P-60 10 15?16 -.007 6 47?64 1 9?16 14 3?16 58.9
23064K
SNP-3064 S-3064 N-064 P-64 11 15?16 -.007 6 61?64 1 21?32 15 65.7
23068K
SNP-3068 S-3068 N-068 P-68 12 7?16 -.008 7 35?64 1 25?32 15 3?4 77.8
23072K
SNP-3072 S-3072 N-072 P-72 13 7?16 -.008 7 37?64 1 25?32 16 1?2 86.2
23076K
SNP-3076 S-3076 N-076 P-76 13 15?16 -.008 7 3?4 1 57?64 17 3?4 94.3
23080K
SNP-3080 S-3080 N-080 P-80 15 -.008 8 13?32 2 1?16 18 1?2 100.0
•
B404 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearing Pillow Blocks
S
SHAFT ADAPTER ACCESSORIES FOR TAPERED BORE BEARINGS
SNW?SNP - PULL TYPE SLEEVE, LOCKNUT, LOCKWASHER/LOCKPLATE ASSEMBLIES
Caption: D1
• The table below shows dimensions for adapter assemblies and components used in the mounting of tapered bore bearings on shafts.
• SNW assembly consists of a sleeve, locknut and lockwasher.
• SNP assembly consists of a sleeve, locknut and lockplate.
d
B
B2
Tapered bore bearing plus SNW.
Bearing Number
Accessory Numbers
Shaft
Adapter Dimensions
SNW/SNP
Dimensions
Assembly
Assembly Sleeve Locknut Lockwasher Tolerance B2 S D1 Weight Lockplate d +.000"
Diameter 0
in. in. in. in. in. lbs.
SERIES 223K AND 232K
22308K
SNW-108 S-108 N-08 W-08 1 5?16 -.003 2 1?64 1?2
2 1?4 0.8
22309K
SNW-109 S-109 N-09 W-09 1 7?16 -.003 2 9?64 1?2 2 17?32 0.8
22310K
SNW-110 S-110 N-10 W-10 1 11?16 -.003 2 25?64 9?16 2 11?16 0.9
22311K
SNW-111 S-111 N-11 W-11 1 15?16 -.003 2 33?64 9?16 2 31?32 0.9
22312K
SNW-112 S-112 N-12 W-12 2 1?16 -.004 2 21?32 19?32 3 5?32 1.2
22313K
SNW-113 S-113 N-13 W-13 2 3?16 -.004 2 49?64 5?8 3 3?8 1.7
22314K
SNW-114 S-114 N-14 W-14 2 5?16 -.004 2 61?64 5?8 3 5?8 2.3
22315K
SNW-115 S-115 AN-15 W-15 2 7?16 -.004 3 5?64 43?64 3 7?8 3.0
22316K
SNW-116 S-116 AN-16 W-16 2 11?16 -.004 3 13?64 43?64 4 5?32 3.2
22317K
SNW-117 S-117 AN-17 W-17 2 15?16 -.004 3 5?16 45?64 4 13?32 3.5
22318K
SNW-118 S-118 AN-18 W-18 3 3?16 -.004 3 35?64 25?32 4 21?32 4.0
22319K
SNW-119 S-119 AN-19 W-19 3 5?16 -.004 3 45?64 13?16 4 15?16 5.0 22320K 23220K SNW-120 S-120 AN-20 W-20 3 7?16 -.004 3 31?32 27?32 5 3?16 6.2 22322K 23222K SNW-122 S-122 AN-22 W-22 3 15?16 -.004 4 11?32 29?32 5 23?32 6.5 22324K 23224K SNW-124 S-124 AN-24 W-24 4 3?16 -.005 4 41?64 15?16 6 1?8 8.0 22326K 23226K SNW-126 S-126 AN-26 W-26 4 7?16 -.005 4 63?64 1
6 3?4 12.4
Caption:
22328K 23228K SNW-128 S-128 AN-28 W-28 4 15?16 -.005 5 21?64 1 1?16 7 3?32 13.0 22330K 23230K SNW-130 S-130 AN-30 W-30 5 3?16 -.005 5 5?8 1 1?8 7 11?16 17.6 22332K 23232K SNW-132 S-132 AN-32 W-32 5 7?16 -.005 5 59?64 1 3?16 8 1?16 18.5 22334K 23234K SNW-134 S-134 AN-34 W-34 5 15?16 -.005 6 3?16 1 7?32 8 21?32 21.0 22336K 23236K SNW-136 S-136 AN-36 W-36 6 7?16 -.005 6 29?64 1 1?4 9 1?16 22.5
22338K 23238K SNW-138 S-138 AN-38 W-38 6 15?16 -.005 6 3?4 1 9?32 9 15?32 28.0 22340K 23240K SNW-140 S-140 AN-40 W-40 7 3?16 -.005 7 3?32 1 11?32 9 27?32 36.0 22344K 23244K SNW-144 S-144 N-044 W-44 7 15?16 -.005 7 9?32 1 3?8 11 47.0 22348K 23248K SNP-148 S-148 N-048 P-48 8 15?16 -.006 8 7?64 1 11?32 11 7?16 38.3 22352K 23252K SNP-152 S-152 N-052 P-52 9 7?16 -.006 8 49?64 1 13?32 12 13?16 53.4 22356K 23256K SNP-3256 S-3256 N-056 P-56 10 7?16 -.007 8 15?16 1 1?2 13 61.3
SERIES 231K
23122K
SNW-3122 S-22 N-022 W-022 3 15?16 -.004 3 13?64 25?32 5 5?32 4.2
23124K
SNW-3124 S-24 N-024 W-024 4 3?16 -.005 3 15?32 13?16 5 11?16 5.8
23126K
SNW-3126 S-26 N-026 W-026 4 7?16 -.005 3 49?64 7?8 6 1?8 8.3
23128K
SNW-3128 S-28 N-028 W-028 4 15?16 -.005 3 63?64 15?16 6 1?2 8.8
23130K
SNW-3130 S-30 N-030 W-030 5 3?16 -.005 4 15?64 31?32 7 1?8 13.7
23132K
SNW-3132 S-32 N-032 W-032 5 7?16 -.005 4 37?64 1 1?32 7 1?2 13.3
23134K
SNW-3134 S-34 N-034 W-034 5 15?16 -.005 4 27?32 1 1?16 7 7?8 16.1
23136K
SNW-3136 S-36 N-036 W-036 6 7?16 -.005 5 1?32 1 3?32 8 1?4 17.1
23138K
SNW-3138 S-38 N-038 W-038 6 15?16 -.005 5 17?64 1 1?8 8 11?16 19.7
23140K
SNW-3140 S-40 N-040 W-040 7 3?16 -.005 5 31?64 1 3?16 9 7?16 28.4
23144K
SNW-3144 S-44 N-044 W-044 7 15?16 -.005 5 29?32 1 1?4 10 1?4 28.1
23148K
SNP-3148 S-48 N-048 P-48 8 15?16 -.006 6 41?64 1 11?32 11 7?16 36.0
23152K
SNP-3152 S-52 N-052 P-52 9 7?16 -.006 7 19?32 1 13?32 12 3?16 39.0
23156K
SNP-3156 S-3156 N-056 P-56 10 7?16 -.007 7 49?64 1 1?2 13 60.0
23160K
SNP-3160 S-3160 N-060 P-60 10 15?16 -.007 8 3?8 1 9?16 14 3?16 65.0
23164K
SNP-3164 S-3164 N-064 P-64 11 15?16 -.007 9 7?64 1 21?32 15 70.0
TIMKEN PRODUCTS CATALOG B405
•
SPHERICAL ROLLER BEARINGS
Caption:
SHAFT ADAPTER ACCESSORIES FOR TAPERED BORE BEARINGS
PUSH TYPE REMOVABLE SLEEVE, LOCKNUT
AND LOCKWASHER
• The chart below shows dimensions for adapter assemblies and components used in the tapered bore bearings on shafts.
B
B
Bearing
Accessory Numbers
Shaft
Adapter Dimensions
Number
Dimensions
Sleeve
Sleeve Locknut Lockwasher Removal Tolerance B L a
C Weight
Lockplate Nut d +.000" Pitch
Removal Nut
Diameter 0 Diameter
O.D.
mm mm mm mm mm mm kg. in. in. in. in. in. in. lbs.
SERIES 222K
22216K SK-8022 N-14 W-14 AN-18 70 –.10 88.19 50 3.50 118.39 0.5
2.7559 –.004 3.472 1.969 0.138 4.661 1.2
22217K SK-8522 AN-15 W-15 AN-19 75 –.10 93.35 52 3.50 125.55 0.6
2.9528 –.004 3.675 2.047 0.138 4.943 1.4
22218K SK-9022 AN-16 W-16 AN-20 80 –.10 98.12 53 3.50 131.90 0.6
3.1496 –.004 3.863 2.087 0.138 5.193 1.5
22219K SK-9522 AN-17 W-17 AN-21 85 –.10 103.28 57 4.00 138.25 0.8
3.3465 –.004 4.066 2.244 0.157 5.443 1.8
22220K SK-10022 AN-18 W-18 AN-22 90 –.10 109.12 59 4.00 145.39 0.9
3.5433 –.004 4.269 2.323 0.157 5.724 2.0
22222K SK-11022 AN-20 W-20 ARN-22 100 –.10 119.94 65 4.00 158.75 1.1
3.9370 –.004 4.722 2.559 0.157 6.250 2.4
22224K SK-12022 AN-22 W-22 ARN-24 110 –.13 130.28 72 4.00 174.63 1.4
4.3307 –.005 5.129 2.835 0.157 6.875 3.1
22226K SK-13022 AN-22 W-22 ARN-26 115 –.13 141.38 78 4.00 184.15 2.2
4.5276 –.005 5.566 3.071 0.15.7 7.250 5.0
22228K SK-14022 AN-24 W-24 RN-28 125 –.13 152.73 82 5.00 200.03 2.6
4.9213 –.005 6.013 3.228 0.197 7.875 5.8
22230K SK-15022 AN-26 W-26 RN-30 135 –.13 163.04 88 5.00 209.55 3.0
5.3150 –.005 6.419 3.465 0.197 8.250 6.8
22232K SK-16022 AN-28 W-28 RN-32 140 –.13 173.76 96 5.00 225.43 4.5
5.5118 –.005 6.841 3.780 0.197 8.875 9.9
22234K SK-17022 AN-30 W-30 RN-34 150 –.13 184.07 104 5.00 234.95 5.2
5.9055 –.005 7.247 4.095 0.197 9.250 11.5
22236K SK-18022 AN-32 W-32 RN-36 160 –.13 194.79 104 5.00 247.65 5.6
6.2992 –.005 7.669 4.095 0.197 9.750 12.5
22238K SK-19022 AN-34 W-34 RN-38 170 –.13 205.92 112 5.00 269.88 6.5
6.6929 –.005 8.107 4.409 0.197 10.625 14.5
22240K SK-20022 AN-36 W-36 N-044 180 –.13 217.02 118 5.00 279.53 7.4
7.0866 –.005 8.544 4.646 0.197 11.005 16.3
22244K SK-22022 AN-40 W-40 N-048 200 –.13 236.98 130 6.00 290.65 8.8
7.8740 –.005 9.330 5.118 0.236 11.443 19.6
22248K SK-24022 N-44 W-44 N-052 220 –.15 256.03 144 6.00 309.70 11.0
8.6614 –.006 10.080 5.669 0.236 12.193 24.3
22252K SK-26022 N-048 P-48 N-056 240 –.15 276.66 155 6.00 330.33 14.0
9.4488 –.006 10.892 6.102 0.236 13.005 30.9
22256K SK-28022 N-052 P-52 RN-56 260 –.15 301.27 155 8.00 425.45 15.0
10.2362 –.006 11.861 6.102 0.315 16.750 33.1
22260K SK-30022 N-056 P-56 RN-60 280 –.15 325.88 170 8.00 416.10 17.7
11.0236 –.006 12.830 6.693 0.315 16.382 39.2
22264K SK-32022 N-060 P-60 RN-64 300 –.15 345.72 180 10.00 431.8 21.0
11.8110 –.006 13.611 7.087 0.394 17.000 46.3
Caption:
•
B406 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearing Pillow Blocks
Tapered bore bearing mounted with push type removable sleeve.
22308K SK-4023 N-07 W-07 N-09 35 –.08 43.94 40 3.00 64.41 0.1
1.3780 –.003 1.730 1.575 0.118 2.536 0.2
22309K SK-4523 N-08 W-08 N-10 40 –.08 49.02 44 3.00 68.40 0.1
1.5748 –.003 1.930 1.732 0.118 2.693 0.3
22310K SK-5023 N-09 W-09 RN-10 45 –.08 55.04 50 3.00 76.20 0.2
1.7717 –.003 2.167 1.969 0.118 3.000 0.4
22311K SK-5523 N-10 W-10 RN-11 50 –.08 60.20 54 3.00 81.76 0.2
1.9685 –.003 2.370 2.126 0.118 3.219 0.5
22312K SK-6023 N-11 W-11 RN-12 55 –.10 65.76 57 3.50 87.33 0.3
2.1654 –.004 2.589 2.244 0.138 3.438 0.6 22313K SK-6523 N-12 W-12 AN-15 60 –.10 73.10 61 3.50 98.55 0.3
2.3622 –.004 2.878 2.402 0.138 3.880 0.8 22314K SK-7023 N-12 W-12 AN-16 60 –.10 78.28 65 3.50 105.69 0.6
2.3622 –.004 3.082 2.559 0.138 4.161 1.5 22315K SK-7523 N-13 W-13 AN-17 65 –.10 83.44 69 3.50 112.04 0.8
2.5591 –.004 3.285 2.717 0.138 4.411 1.7 22316K SK-8023 N-14 W-14 AN-18 70 –.10 88.19 72 3.50 118.39 0.9
2.7559 –.004 3.472 2.835 0.138 4.661 2.0 22317K SK-8523 AN-15 W-15 AN-19 75 –.10 93.35 75 3.50 125.55 1.0
2.9528 –.004 3.675 2.953 0.138 4.943 2.2 22318K SK-9023 AN-16 W-16 AN-20 80 –.10 98.12 80 3.50 131.90 1.1
3.1496 –.004 3.863 3.150 0.138 5.193 2.5 22319K SK-9523 AN-17 W-17 AN-21 85 –.10 103.28 85 4.00 138.25 1.3
3.3465 –.004 4.066 3.346 0.157 5.443 2.9 22320K SK-10023 AN-18 W-18 AN-22 90 –.10 109.12 90 4.00 145.39 1.5
3.5433 –.004 4.269 3.543 0.157 5.724 3.3 22322K SK-11023 AN-20 W-20 ARN-22 100 –.10 119.94 98 4.00 158.75 1.9
3.9370 –.004 4.722 3.858 0.157 6.250 4.2 22324K SK-12023 AN-22 W-22 ARN-24 110 –.13 130.28 105 4.00 174.63 2.2
4.3307 –.005 5.129 4.134 0.157 6.875 5.0 22326K SK-13023 AN-22 W-22 ARN-26 115 –.13 141.38 115 4.00 184.15 3.6
4.5276 –.005 5.566 4.528 0.157 7.250 8.0 22328K SK-14023 AN-24 W-24 RN-28 125 –.13 152.73 125 5.00 200.03 4.3
4.9213 –.005 6.013 4.921 0.197 7.875 9.5 22330K SK-15023 AN-26 W-26 RN-30 135 –.13 163.04 135 5.00 209.55 5.1
5.3150 –.005 6.419 5.315 0.197 8.250 11.4 22332K SK-16023 AN-28 W-28 RN-32 140 –.13 173.76 140 6.00 225.43 7.0
5.5118 –.005 6.841 5.512 0.236 8.875 15.5 22334K SK-17023 AN-30 W-30 RN-34 150 –.13 184.07 146 6.00 234.95 7.8
5.9055 –.005 7.247 5.748 0.236 9.250 17.2 22336K SK-18023 AN-32 W-32 RN-36 160 –.13 194.79 154 6.00 247.65 9.1
6.2992 –.005 7.669 6.063 0.236 9.750 20.2 22338K SK-19023 AN-34 W-34 RN-38 170 –.13 205.92 160 7.00 269.88 10.0
6.6929 –.005 8.107 6.299 0.276 10.625 22.1 22340K SK-20023 AN-36 W-36 N-044 180 –.13 217.02 170 7.00 279.53 11.4
7.0866 –.005 8.544 6.693 0.276 11.005 25.2 22344K SK-22023 AN-40 W-40 N-048 200 –.13 236.98 181 8.00 290.65 13.3
7.8740 –.005 9.330 7.126 0.315 11.443 29.5 22348K SK-24023 N-44 W-44 N-052 220 –.15 256.03 189 8.00 309.70 15.5
8.6614 –.006 10.080 7.441 0.315 12.193 34.2 22352K SK-26023 N-048 P-48 N-056 240 –.15 276.66 200 8.00 330.33 18.2
9.4488 –.006 10.892 7.874 0.315 13.005 40.2 22356K SK-28023 N-052 P-52 RN-56 260 –.15 301.27 210 10.00 425.45 22.0
10.2362 –.006 11.861 8.268 0.394 16.75 48.5
TIMKEN PRODUCTS CATALOG B407
a
d
L
B
C
B
REMOVAL NUT
Bearing
Number
Accessory Numbers
Shaft
Adapter Dimensions
Dimensions
Sleeve Locknut Lockwasher Removal Tolerance B L
Lockplate Nut d +.000" Pitch
Diameter 0 Diameter
Sleeve
a
C Weight Removal Nut
O.D.
mm mm mm mm mm mm kg. in. in. in. in. in. in. lbs.
SERIES 223K
Caption:
•
Caption:
SPHERICAL ROLLER BEARINGS
SHAFT ADAPTER ACCESSORIES FOR STRAIGHT BORE BEARINGS LOCKNUT AND LOCKWASHER
B
B
• The chart below shows dimensions for locknuts and lockwashers used in the mounting of straight bore bearings on shafts.
• Other dimensions and tolerances related to shaft con?gurations are also shown.
• Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222 and 223 etc.).
Threads
Bearing Locknut Lockwasher Threads Major Diameter
Pitch Diameter
Minor
A
Bore
Per Min. Max. Min. Max. Dia. Relief Inch
Dia.
mm mm mm mm
mm
mm
mm
inch inch inch inch inch inch
35
N 07
W 07
18 34.740 34.950
33.930 34.030 33.220 32.820
1.3678
1.3760
1.3359 1.3399
1.3078 1.2922
40
N 08
W 08
18 39.490 39.700 38.670 38.780 37.970 37.570
1.5548
1.5630
1.5224 1.5269
1.4948 1.4792
45
N 09
W 09
18 44.670 44.880 43.850 43.960 43.150 42.750
1.7588
1.7670
1.7264 1.7309
1.6988 1.6832
50
N 10
W 10
18 49.750 49.960 48.930 49.050 48.230 47.830
1.9588
1.9670
1.9264 1.9309
1.8988 1.8832
55
N 11
W 11
18 54.580 54.790 53.740 53.870 53.060 52.660
2.1488
2.1570
2.1158 2.1209
2.0888 2.0732
60
N 12
W 12
18 59.740 59.940 58.900 59.030 58.210 57.820
2.3518
2.3600
2.3188 2.3239
2.2918 2.2762
65
N 13
W 13
18 64.510 64.720 63.670 63.800 62.990 62.590
2.5398
2.5480
2.5068 2.5119
2.4798 2.4642
70
N 14
W 14
18 69.670 69.880 68.830 68.960 68.140 67.750
2.7428
2.7510
2.7098 2.7149
2.6828 2.6672
75 AN 15 W 15
12 74.210 74.500 72.990 73.120 71.900 71.110
2.9218
2.9330
2.8735 2.8789
2.8308 2.7995
80 AN 16 W 16
12 79.400 79.680 78.160 78.310 77.080 76.290
3.1258
3.1370
3.0770 3.0829
3.0348 3.0035
85 AN 17 W 17
Caption:
12 84.550 84.840 83.310 83.460 82.240 81.450
3.3288
3.3400
3.2800 3.2859
3.2378 3.2065
90 AN 18 W 18
12 89.300 89.590 88.020 88.210 86.990 86.200
3.5158
3.5270
3.4655 3.4729
3.4248 3.3935
95 AN 19 W 19
12 94.460 94.740 93.180 93.370 92.150 91.350
3.7188
3.7300
3.6685 3.6759
3.6278 3.5965
100 AN 20 W 20
12 99.230 99.520 97.960 98.140 96.920 96.130
3.9068
3.9180
3.8565 3.8639
3.8158 3.7845
105 AN 21 W 21
12 104.410 104.700 103.110 103.320 102.100 101.310
4.1108
4.1220
4.0596 4.0679
4.0198 3.9885
110 AN 22 W 22
12 109.570 109.860 108.270 108.480 107.260 106.460
4.3138
4.3250
4.2626 4.2709
4.2228 4.1915
120 AN 24 W 24
12 119.500 119.790 118.200 118.410 117.190 116.400
4.7048
4.7160
4.6536 4.6619
4.6138 4.5825
130 AN 26 W 26
12 129.410 129.690 128.110 128.320 127.100 126.300
5.0948
5.1060
5.0436 5.0519
5.0038 4.9725
140 AN 28 W 28
12 139.340 139.620 138.040 138.250 137.030 136.230
5.4858
5.4970
5.4346 5.4429
5.3948 5.3635
150 AN 30 W 30
12 149.270 149.560 147.970 148.180 146.960 146.160
5.8768
5.8880
5.8256 5.8339
5.7858 5.7545
160 AN 32 W 32
8 159.230 159.610 157.320 157.550 155.720 154.920
6.2688
6.2840
6.1937 6.2028
6.1306 6.0993
170 AN 34 W 34
8 168.750 169.140 166.850 167.080 165.240 164.450
6.6438
6.6590
6.5687 6.5778
6.5056 6.4743
180 AN 36 W 36
8 179.090 179.480 177.180 177.410 175.580 174.790
7.0508
7.0660
6.9757 6.9848
6.9126 6.8813
190 AN 38 W 38
8 189.400 189.790 187.500 187.730 185.890 185.100
7.4568
7.4720
7.3817 7.3908
7.3186 7.2873
200 AN 40 W 40
8 198.930 199.310 196.960 197.250 195.420 194.620
7.8318
7.8470
7.7544 7.7658
7.6936 7.6623
220 N 044 W 44
8 218.770 219.150 216.780 217.090 215.250 214.460
8.6128
8.6280
8.5347 8.5468
8.4746 8.4433
(1) See page B395 for suggested S-3 shaft limits.
•
B408 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearing Pillow Blocks
S
L H
D
M
A
S-3
W
Q
C1
12.7 2.4 4.8 3.2
1?2
3?32
3?16
1?8
13.5 2.4 7.9 3.2
17?32
3?32
5?16
1?8
S
B
R
B
Shaft
Locknut
Lockwasher
S-3(1) W L H S M C1 D Q R B S
+ 1?64 + 1?64 + 1?64 + 1?64 + 1?64
0
0 0 0 0
mm mm mm mm mm mm mm mm mm mm mm mm inch inch inch inch inch inch inch inch inch inch inch inch
31.750 2.4
52.39 11.40 1.30 36.00 57.20 4.50
1 1?4 3?32
2 1?16 0.448 0.050 1.416 2 1?4 0.176
36.510 3.2
57.15 11.40 1.50 40.70 62.70 7.40
2 1?4 0.448 0.058 1.603 2 15?32 0.290
42.860 3.2 13.5 2.4 7.9 4.0 64.30 11.40 1.50 46.20 69.50 7.40
1 11?16 1?8 17?32 3?32 5?16 5?32 2 17?32 0.448 0.058 1.817 2 47?64 0.290
47.630 3.2 15.1 2.4 7.9 4.0 68.30 13.00 1.50 51.20 74.20 7.40
1 7?8 1?8 19?32 3?32 5?16 5?32 2 11?16 0.510 0.058 2.017 2 59?64 0.290
52.390 3.2 15.1 3.2 7.9 4.0 75.40 13.00 1.60 56.10 79.00 7.40
2 1?16 1?8 19?32 1?8 5?16 5?32 2 31?32 0.510 0.063 2.207 3 7?64 0.290
57.150 3.2 15.9 3.2 7.9 4.0 80.20 13.70 1.60 61.60 85.00 7.40
2 1?4 1?8
5?8
1?8
5?16
5?32
3 5?32 0.541 0.063 2.425 3 11?32 0.290
61.910 3.2 16.7 3.2 7.9 4.0 85.70 14.60 1.60 66.40 90.90 7.40
2 7?16 1?8 21?32 1?8 5?16 5?32 3 3?8 0.573 0.063 2.613 3 37?64 0.290
66.680 3.2 16.7 3.2 7.9 6.4 92.10 14.60 1.60 71.50 97.20 7.40
2 5?8 1?8 21?32 1?8 5?16 1?4 3 5?8 0.573 0.063 2.816 3 53?64 0.290
71.440 4.0 17.5 3.2 7.9 6.4 98.40 15.30 1.60 76.30 104.40 7.40
2 13?16 5?32 11?16 1?8 5?16 1?4 3 7?8 0.604 0.072 3.003 4 7?64 0.290
76.200 4.0 17.5 3.2 9.5 6.4 105.60 15.30 1.80 81.50 111.10 9.00
3 5?32 11?16 1?8 3?8
1?4
4 5?32 0.604 0.072 3.207 4 3?8 0.353
80.960 4.0 16.7 3.2 9.5 6.4 111.90 16.10 1.80 87.00 117.50 9.00
3 3?16 5?32 21?32 1?8 3?8
1?4
4 13?32 0.635 0.072 3.425 4 5?8 0.353
85.730 4.0 20.6 4.0 9.5 6.4 118.30 17.70 2.40 91.70 125.40 9.00
3 3?8 5?32 13?16 5?32 3?8
1?4
4 21?32 0.698 0.094 3.612 4 15?16 0.353
90.490 4.0 21.4 4.0 9.5 6.4 125.40 18.50 2.40 97.30 132.60 9.00
3 9?16 5?32 27?32 5?32 3?8
1?4
4 15?16 0.729 0.094 3.830 5 7?32 0.353
96.840 4.0 22.2 4.0 9.5 7.9 131.80 19.30 2.40 102.10 139.70 9.00
3 13?16 5?32 7?8
5?32
3?8
5?16
5 3?16 0.760 0.094 4.018 5 1?2 0.353
100.010 4.0 22.2 4.0 9.5 7.9 138.10 19.30 2.40 107.20 144.90 9.00
3 15?16 5?32 7?8
5?32
3?8
5?16
5 7?16 0.760 0.094 4.222 5 45?64 0.353
106.360 4.0 23
4.8 9.5 7.9 145.30 20.10 3.20 112.40 154.00 9.00
4 3?16 5?32 29?32 3?16 3?8 5?16 5 23?32 0.791 0.125 4.425 6 1?16 0.353
115.890 4.0 23.8 4.8 9.5 7.9 155.60 20.90 3.20 122.70 164.30 9.00
4 9?16 5?32 15?16 3?16 3?8 5?16 6 1?8 0.823 0.125 4.831 6 15?32 0.353
125.410 4.0 25.4 4.8 12.7 7.9 171.50 22.50 3.20 132.70 178.60 11.10
4 15?16 5?32
1
1 7?16 1?8
Caption:
3?16
1?2
5?16
6 3?4 0.885 0.125 5.226 7 1?32 0.435
134.940 4.0 27
4.8 15.9 7.9 180.20 24.10 3.20 142.70 188.90 15.00
5 5?16 5?32 1 1?16 3?16 5?8 5?16 7 3?32 0.948 0.125 5.617 7 7?16 0.590
146.050 4.0 28.6 5.6 15.9 9.5 195.30 24.90 4.00 152.90 204.80 15.00
5 3?4 5?32 1 1?8 7?32 5?8
3?8
7 11?16 0.979 0.156 6.018 8 1?16 0.590
153.990 6.4 30.2 6.0 15.9 9.5 204.80 26.40 4.00 163.20 214.30 15.00
6 1?16 1?4 1 3?16 15?64 5?8
3?8
8 1?16 1.041 0.156 6.424 8 7?16 0.590
163.510 6.4 31
6.0 19.1 9.5 219.90 27.30 4.00 172.70 230.20 18.20
6 7?16 1?4 1 7?32 15?64 3?4
3?8
8 21?32 1.073 0.156 6.799 9 1?16 0.715
174.630 6.4 31.8 6.0 19.1 9.5 230.20 28.00 4.00 183.00 239.70 18.20
6 7?8 1?4 1 1?4 15?64 3?4
3?8
9 1?16 1.104 0.156 7.206 9 7?16 0.715
184.150 6.4 32.5 6.0 19.1 9.5 240.50 28.80 4.00 193.30 250.80 18.20
7 1?4 1?4 1 9?32 15?64 3?4
3?8
9 15?32 1.135 0.156 7.612 9 7?8 0.715
193.680 6.4 34.1 6.0 22.2 9.5 250.00 30.40 4.00 203.60 261.90 21.30
7 5?8 1?4 1 11?32 15?64 7?8
3?8
9 27?32 1.198 0.156 8.017 10 5?16 0.840
211.140 6.4 34.9 9.5 27.0 9.5 279.40 31.80 3.20 221.10 290.50 23.90
8 5?16 1?4 1 3?8 3?8 1 1?16 3?8
11 1.250 0.125 8.703 11 7?16 0.940
(1) See page B395 for suggested S-3 shaft limits.
TIMKEN PRODUCTS CATALOG B409
•
Caption:
SPHERICAL ROLLER BEARINGS
Caption:
SHAFT ADAPTER ACCESSORIES FOR STRAIGHT BORE BEARINGS LOCKNUT AND LOCKPLATE
B
B
• The chart below shows dimensions for locknuts and lockplates used in the mounting of straight bore bearings on shafts.
• Other dimensions and tolerances related to shaft con?gurations are also shown.
• Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222,223 etc.).
Threads
Bearing Locknut Lockplate Threads Major Diameter
Pitch Diameter
Minor
A
Bore
Per Min. Max. Min. Max. Dia. Relief Inch
Dia.
mm mm mm mm
mm
mm
mm
inch inch inch inch inch inch
240 N 048 P 48 6
239.31 239.83 236.76 237.08 234.63 233.44
9.4218
9.442
9.3213
9.3337 9.2374
9.1905
260 N 052 P 52
6
258.36 258.88 255.8 256.13 253.68 252.49
10.1718 10.192 10.0707 10.0837 9.9874
9.9405
280 N 056 P 56
6
278.99 279.50 276.42 276.75 274.31 273.11
10.9838 11.004 10.8827 10.8957 10.7994 10.7525
300 N 060 P 60
6
298.83 299.34 296.26 296.59 294.14 292.95
11.7648 11.785 11.6637 11.6767 11.5804 11.5335
320 N 064 P 64
6
318.56 319.08 315.98 316.32 313.88 312.69
12.5418 12.562 12.4402 12.4537 12.3574 12.3105
340 N 068 P 68
5
337.49 337.90 334.95 335.36 332.31 331.11
13.287
13.303 13.187
13.203 13.083
13.036
360 N 072 P 72
5
358.60 359.00 356.06 356.46 353.42 352.22
14.118
14.134 14.018
14.034 13.914
13.867
380 N 076 P 76
5
378.59 378.99 376.05 376.45 373.41 372.21
14.905
14.921 14.805
14.821 14.701
14.654
400 N 080 P 80
5
398.60 399.01 396.06 396.47 393.42 392.23
15.693
15.709 15.593
15.609 15.489
15.442
420 N 084 P 84
5
418.59 419.00 416.05 416.46 413.41 412.22
16.480
16.496 16.380
16.396 16.276
16.229
440 N 088 P 88
Caption:
5
438.58 438.99 436.05 436.45 433.40 432.21
17.267
17.283 17.167
17.183 17.063
17.016
460 N 092 P 92
5
458.60 459.00 456.06 456.46 453.42 452.22
18.055
18.071 17.955
17.971 17.851
17.804
480 N 096 P 96
5
478.59 478.99 476.05 476.45 473.41 472.21
18.842
18.858 18.742
18.758 18.638
18.591
500 N 500 P 500
5
498.60 499.01 496.06 496.47 493.42 492.23
19.630
19.646 19.530
19.546 19.426
19.379
530 N 530 P 530
4
528.50 529.01 525.32 525.83 522.15 520.55
20.807
20.827 20.682
20.702 20.557
20.494
560 N 560 P 560
4
558.50 559.00 555.32 555.83 552.15 550.55
21.988
22.008 21.863
21.883 21.738
21.675
600 N 600 P 600
4
598.50 599.01 595.33 595.83 592.15 590.55
23.563
23.583 23.438
23.458 23.313
23.250
630 N 630 P 630
4
628.50 629.01 625.32 625.83 622.15 520.55
24.744
24.764 24.619
24.639 24.494
24.431
670 N 670 P 670
4
668.50 669.01 665.33 665.84 662.15 660.55
26.319
26.339 26.194
26.214 26.069
26.006
710 N 710 P 710
3
708.33 709.02 704.09 704.77 700.02 698.42
27.887
27.914 27.720
27.747 27.56
27.497
750 N 750 P 750
3
748.34 749.02 744.09 744.78 740.03 738.43
29.462
29.489 29.295
29.322 29.135
29.072
800 N 800 P 800
3
798.32 799.01 794.08 794.77 790.02 788.42
31.430
31.457 31.263
31.290 31.103
31.040
850 N 850 P 850
3
848.34 849.02 844.09 844.78 840.03 838.43
33.399
33.426 33.232
33.259 33.072
33.009
900 N 900 P 900
3
898.32 899.01 894.08 894.77 890.02 888.42
35.367
35.394 35.200
35.227 35.040
34.977
950 N 950 P 950
3
948.33 949.02 944.09 944.78 940.03 938.43
37.336
37.363 37.169
37.196 37.009
36.946
•
B410 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearing Pillow Blocks
B
Shaft
Locknut / Lockplate
S-3(1) L
H
S
M
C1
D
G
H
R
F
+ 1?64 + 1?64 + 1?64 + 1?64
±.010"
0
0
0
0
mm mm mm mm mm mm mm mm mm mm mm inch inch inch inch inch inch inch inch inch inch inch
233.36 42.86 11.1 28.6 34.9 290.5 34.1 22.48 9.5 203.2 43.26
9 3?16
1 11?16 7?16
1 1?8
1 3?8 11 7?16 1 11?32
0.885 3?8
8
1 45?64
252.41 45.24 11.1 30.2 37.3 309.6 35.7 22.48 9.5 228.6 44.85
9 15?16 1 25?32 7?16
1 3?16 1 15?32 12 3?16 1 13?32
0.885 3?8
9
1 49?64
273.05 47.63 11.1 31.8 39.7 330.2 38.1 25.65 9.5 228.6 47.23
10 3?4
1 7?8
7?16
1 1?4
1 9?16
13
1 1?2
1.010 3?8
9
1 55?64
292.1 49.21 11.1 34.9 41.3 360.4 39.7 25.65 12.7 254.0 50.01
11 1?2 1 15?16 7?16
1 3?8
1 5?8 14 3?16 1 9?16
1.010 1?2
10
1 31?32
312.74 51.59 11.1 36.5 43.7 381.0 42.1 25.65 12.7 254.0 52.39
12 5?16 2 1?32 7?16
1 7?16 1 23?32
15 1 21?32
1.010 1?2
10
2 1?16
331.79 56.36 11.1 38.1 48.4 400.1 45.2 25.65 12.7 279.4 55.56
13 1?16 2 7?32 7?16
1 1?2
1 29?32 15 3?4 1 25?32
1.010 1?2
11
2 3?16
350.84 56.36 12.7 38.1 48.4 419.1 45.2 32.00 12.7 279.4 55.56
13 13?16 2 7?32
1?2
1 1?2
1 29?32 16 1?2 1 25?32
1.260 1?2
11
2 3?16
371.48 59.53 12.7 38.1 51.59 450.9 48.4 32.00 15.1 304.8 61.12
14 5?8 2 11?32 1?2
1 1?2
2 1?32 17 3?4 1 29?32
1.260 19?32
12
2 13?32
390.53 63.50 12.7 41.3 55.6 469.9 52.4 32.00 15.1 330.2 65.09
15 3?8
2 1?2
1?2
1 5?8
2 3?16 18 1?2 2 1?16
1.260 19?32
13
2 9?16
Caption:
411.16 63.50 12.7 41.3 55.6 490.5 52.4 35.18 15.1 330.2 65.09
16 3?16
2 1?2
1?2
1 5?8
2 3?16 19 5?16 2 1?16
1.385 19?32
13
2 9?16
431.80 71.44 12.7 46.0 63.50 520.7 60.3 35.18 15.1 355.6 75.41
17
2 13?16 1?2
1 13?16
2 1?2 20 1?2 2 3?8
1.385 19?32
14
2 31?32
450.85 71.44 12.7 46.0 63.50 539.8 60.3 35.18 15.1 406.4 75.41
17 3?4 2 13?16 1?2
1 13?16
2 1?2 21 1?4 2 3?8
1.385 19?32
16
2 31?32
469.9 71.44 12.7 46.0 63.50 560.4 60.3 38.35 15.1 406.4 75.41
18 1?2 2 13?16 1?2
1 13?16
2 1?2 22 1?16 2 3?8
1.510 19?32
16
2 31?32
489.0 79.4 12.7 46.0 71.4 579.4 68.3 38.35 15.1 406.4 83.3
19 1?4
3 1?8
1?2
1 13?16 2 13?16 22 13?16 2 11?16
1.510 19?32
16
3 9?32
517.5 79.4 12.7 46.0 71.4 630.2 68.3 41.53 20.6 425.5 83.3
20 3?8
3 1?8
1?2
1 13?16 2 13?16 24 13?16 2 11?16
1.635 13?16 16 3?4
3 9?32
549.3 85.7 12.7 46.0 77.8 649.3 74.6 41.53 20.6 476.3 89.7
21 5?8
3 3?8
1?2
1 13?16 3 1?16 25 9?16 2 15?16
1.635 13?16 18 3?4
3 17?32
587.4 85.7 12.7 46.0 77.8 700.1 74.6 41.53 20.6 508.0 89.7
23 1?8
3 3?8
1?2
1 13?16 3 1?16 27 9?16 2 15?16
1.635 13?16
20
3 17?32
619.1 85.7 12.7 50.8 77.8 730.3 74.6 47.88 20.6 520.7 92.1
24 3?8
3 3?8
1?2 2
3 1?16 28 3?4 2 15?16
1.885 13?16 20 1?2
3 5?8
657.2 90.5 12.7 50.8 82.6 779.5 79.4 47.88 20.6 546.1 96.8
25 7?8
3 9?16
1?2 2
3 1?4 30 11?16 3 1?8
1.885 13?16 21 1?2
3 13?16
695.3 101.6 15.9 50.8 93.7 830.3 90.5 51.30 25.4 571.5 108.0
27 3?8
4
5?8
2
3 11?16 32 11?16 3 9?16
2.020 1 22 1?2
4 1?4
736.6 101.6 15.9 50.8 93.7 870.0 90.5 57.66 25.4 584.2 108.0
29
4
5?8 2
3 11?16 34 1?4 3 9?16
2.270 1
23
4 1?4
787.4 101.6 15.9 50.8 93.7 920.8 90.5 57.66 25.4 616.0 108.0
31
4
5?8 2
3 11?16 36 1?4 3 9?16
2.270 1 24 1?4
4 1?4
835.0 101.6 15.9 50.8 93.7 979.5 90.5 64.01 25.4 647.7 108.0
32 7?8
4
5?8
2
3 11?16 38 9?16 3 9?16
2.520 1 25 1?2
4 1?4
885.8 111.1 15.9 50.8 103.2 1030.3 100.0 64.01 25.4 666.8 117.5
34 7?8
4 3?8
5?8 2
4 1?16 40 9?16 3 15?16
2.520 1 26 1?4
4 5?8
933.5 114.3 19.1 50.8 108 1092.2 100.0 64.01 25.4 692.2 117.5
36 3?4
4 1?2
3?4 2
4 1?4
43 3 15?16
2.520 1 27 1?4
4 5?8
(1) See page B395 for suggested S-3 shaft limits.
(2) C is outer ring width that may be obtained from bearing dimension tables.
TIMKEN PRODUCTS CATALOG B411
•
SPHERICAL ROLLER BEARINGS
Caption:
S
B2
METRIC ADAPTER ACCESSORIES
PULL TYPE SLEEVES, LOCKNUTS AND WASHERS TO METRIC STANDARDS
Caption:
• Sleeve numbers with the pre?x “H” are listed in the chart below and are for metric standard shafts. Use metric standard locknuts, indicated by the pre?x “KM” on nut number and metric standard washer, indicated by pre?x “MB” on washer number.
• Metric standard sleeves are also available with bores to English standard shafts by changing letter pre?x designation to “HE”.
• Sleeves with bores for American standard shafts are available by using the pre?x “HA”.
EXAMPLES:
H 316 complete assembly of sleeve with 70 mm bore, locknut and lockwasher
HE 316 complete assembly of sleeve with 2 ¾ in. bore, locknut and lockwasher
HA 316 complete assembly of sleeve with 2 11/16 in. bore, locknut and lockwasher
Note: Sleeves are not sold as separate units.
B
B
d D1
Bearing
Catalog Numbers
Adapter Dimensions
Assembly Includes d Standard Shaft Diameter
Sleeve
Assembly Nut Lockwasher H HE HA Tol. B2 S D1 Assembly
Series 222 Series 231 Number Number Number
+0.000 Weight
mm inch inch inch mm mm mm lbs.
22211K — H 311 KM11 MB11 50 2 1 15?16 -0.004 45 12 75 0.7
22213K — H 313 KM13 MB13 60 2 1?4 2 3?16 -0.004 50 14 85 1.0
22215K — H 315 KM15 MB15 65 2 1?2 2 7?16 -0.004 55 15 98 1.8
Caption:
22216K — H 316 KM16 MB16 70 2 3?4 2 11?16 -0.004 59 17 105 2.2
22217K — H 317 KM17 MB17 75 3 2 15?16 -0.004 63 18 110 2.6
22218K — H 318 KM18 MB18 80 3 1?4 3 3?16 -0.004 65 18 120 3.0
22219K — H 319 KM19 MB19 85 3 1?4 3 5?16 -0.004 68 19 125 3.4
22220K — H 320 KM20 MB20 90 3 1?2 3 7?16 -0.004 71 20 130 3.7
22222K 23122K H 322 KM22 MB22 100 4 3 15?16 -0.004 77 21 145 4.8
22224K 23124K H 3124 KM24 MB24 110 4 1?4 4 3?16 -0.005 88 22 155 5.8
22226K 23126K H 3126 KM26 MB26 115 4 1?2 4 7?16 -0.005 92 23 165 8.0
22228K 23128K H 3128 KM28 MB28 125 5 4 15?16 -0.005 97 24 180 9.5
22230K 23130K H 3130 KM30 MB30 135 5 1?4 5 3?16 -0.005 111 26 195 12.2
22232K 23132K H 3132 KM32 MB32 140 5 1?2 5 7?16 -0.005 119 28 210 16.9
22234K 23134K H 3134 KM34 MB34 150 6 5 15?16 -0.005 122 29 220 18.5
22236K 23136K H 3136 KM36 MB36 160 6 1?2 6 7?16 -0.005 131 30 230 20.9
22238K 23138K H 3138 KM38 MB38 170 6 3?4 6 15?16 -0.005 141 31 240 23.8
22240K 23140K H 3140 KM40 MB40 180 7 7 3?16 -0.005 150 32 250 26.7
22244K 23144K H 3144A HMS3144 MS44 200 — 7 15?16 -0.005 158 32 280 33.5
•
B412 TIMKEN PRODUCTS CATALOG
Spherical Roller Bearing Pillow Blocks
22308K 23208K H 2308 KM8 MB8 35 1 1?4 1 5?16 -.003 46 10 58 0.4
22309K 23209K H 2309 KM9 MB9 40 1 1?2 1 7?16 -.003 50 11 65 0.6
22310K 23210K H 2310 KM10 MB10 45 1 3?4 1 11?16 -.003 55 12 70 0.8 22316K 23216K H 2316 KM16 MB16 70 2 3?4 2 11?16 -.004 78 17 105 2.8
22317K 23217K H 2317 KM17 MB17 75 3 2 15?16 -.004 82 18 110 3.2
22318K 23218K H 2318 KM18 MB18 80 — 3 3?16 -.004 86 18 120 3.7 22326K 23226K H 2326 KM26 MB26 115 4 1?2 4 7?16 -.005 121 23 165 10.1
22328K 23228K H 2328 KM28 MB28 125 5 4 15?16 -.005 131 24 180 12.2
22330K 23230K H 2330 KM30 MB30 135 5 1?4 5 3?16 -.005 139 26 195 14.6 22338K 23238K H 2338 KM38 MB38 170 6 3?4 6 15?16 -.005 169 31 240 27.8
22340K 23240K H 2340 KM40 MB40 180 7 7 3?16 -.005 176 32 250 30.6
— 23244K H 2344A HM44T MB44 200 — — -.005 186 35 280 37.9 — 23260K H 3260 HM3160 MS3160 280 — — -.007 240 40 380 75.2
— 23264K H 3264 HM3164 MS3164 300 — — -.007 258 42 400 86.7
Bearing
Assembly Includes d Standard Shaft Diameter
Sleeve
Assembly Nut Lockwasher H HE HA Tol. B2 S D1 Assembly
Series 223 Series 232 Number Number Number
+0.000 Weight
Catalog Numbers
Adapter Dimensions
mm inch inch inch mm mm mm lbs.
B
22311K 23211K H 2311 KM11 MB11 50 2 1 15?16 -.003 59 12 75 0.9
22313K 23213K H 2313 KM13 MB13 60 2 1?4 2 3?16 -.004 65 14 85 1.2
22315K 23215K H 2315 KM15 MB15 65 2 1?2 2 7?16 -.004 73 15 98 2.3
22320K 23220K H 2320 KM20 MB20 90 3 1?2 3 7?16 -.004 97 20 130 4.7
22322K 23222K H 2322 KM22 MB22 100 4 3 15?16 -.004 105 21 145 6.0
22324K 23224K H 2324 KM24 MB24 110 4 1?4 4 3?16 -.004 112 22 155 7.0
22332K 23232K H 2332 KM32 MB32 140 5 1?2 5 7?16 -.005 147 28 210 20.2
22334K 23234K H 2334 KM34 MB34 150 6 5 15?16 -.005 154 29 220 22.5
22336K 23236K H 2336 KM36 MB36 160 6 1?2 6 7?16 -.005 161 30 230 24.9
— 23248K H 2348A HM48T MB48 220 — — -.006 199 37 300 44.5
— 23252K H 2352A HM52T MB52 240 — — -.006 211 39 330 54.9
— 23256K H 2356A HM56T MB56 260 — — -.007 224 41 350 63.1
Caption:
TIMKEN PRODUCTS CATALOG B413
•
Caption:
SPHERICAL ROLLER BEARINGS
NOTES
B
B
Caption:
•
B414 TIMKEN PRODUCTS CATALOG
Spherical Plain Bearings
SPHERICAL PLAIN
Overview: Timken’s spherical plain bearings consist of a spherically ground inner ring housed in a mating outer ring without any rolling elements.
• Sizes: 12.7 mm - 600 mm bore (0.5 in. - 23.622 in.).
• Markets: Construction, mining, metals, power generation, oils and gas, aggregate, paper and forest products.
• Applications: Articulation joints, A-frames, cylinders (steering, lift, tilt, dump), struts, traction bars.
• Features: Lubrication grooves and holes, seals to retain lubricant and prevent contamination, special materials available.
• Bene?ts: Can carry radial and axial loads in a small envelope and can accommodate moderate misalignment.
A
B
Caption:
Caption:
A
Caption:
TIMKEN PRODUCTS CATALOG B415
•
SPHERICAL PLAIN BEARINGS
Caption:
B
Spherical Plain Bearings
One, two, or three digit “Series” number.
For inch series, the number indicates the nominal bore size (e.g., 10 is 1.00 in.) or an approximate bore size (e.g., 17 is 1.75 in.).
For metric series, the number indicates the exact bore size (e.g., 40 is 40 mm).
Seal Designator:
TT reinforced rubber seals
SS synthetic resin seals
7
SF
12
–
SS
SF spherical plain type (radial inch); single fractured outer ring
SFH spherical plain type (radial inch);
single fractured outer ring, wide inner ring
SBB spherical plain type (radial inch); double fractured outer ring
SBT spherical plain angular contact type (radial inch)
FS spherical plain type (radial metric); single fractured outer ring
FSH spherical plain type (radial metric); single fractured outer ring, wide inner ring
One, two, or three digit number.
For inch series, the number indicates the exact bore size in 1/16ths of an inch (e.g., 12 refers to 12/16 in. which is a 3/4 in. bore).
For metric series, the number indicates the exact outside diameter size (e.g., 62 is 62 mm).
Caption:
•
B416 TIMKEN PRODUCTS CATALOG
B
Spherical
Plain Bearings
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B418
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B418
BEARING TYPES
SF & FS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B418
SF…TT, SF…SS, FS…TT, FS…SS . . . . . . . . . . . . . . . . . . . . . . B418
SBT & SBDT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B418
Internal Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B419
Load Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B419
Misalignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B420
Housing Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B421
Shaft Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B421
Lubrication (SF, FS, SBT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B421
Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B422
Shaft Fits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B422
Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B423
Radial Bearings, Type SF . . . . . . . . . . . . . . . . . . . . . . . . . . . . B424
Radial Bearings, Type FS . . . . . . . . . . . . . . . . . . . . . . . . . . . . B426
Radial Bearings, FSH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B428
Radial Bearings, Type SFH . . . . . . . . . . . . . . . . . . . . . . . . . . . B430
Angular Contact Bearings, Type SBT . . . . . . . . . . . . . . . . . . B432
TIMKEN PRODUCTS CATALOG B417
Page
Caption:
•
SPHERICAL PLAIN BEARINGS
Caption:
INTRODUCTION
GENERAL FEATURES METAL ON METAL BEARINGS
The spherical plain bearing has a spherically shaped inner ring with a ground cylindrical bore for shaft mounting. The cylindrical outer surface of the outer ring permits convenient mounting in a housing.
Spherical plain bearings offer the following advantages:
• High capacity • Ability to accommodate misalignment • Superior performance in low frequency oscillating applications • Simpli?ed housing and shaft design • Easy installation • Radial types available with seals
For all types of spherical plain bearings, both the inner and outer rings are manufactured from through-hardened steel and are precision ground.
The dimensional data lists spherical plain bearings successively by larger bore sizes.
Timken also supplies spherical plain bearings made to special designs. These include standard design bearings made with special materials, clearances, and ?nishes or bearings with special con?gurations, such as extended inner rings.
B
Rings are phosphate treated and coated with molybdenum disul?de (MoS2) to minimize friction of contacting surfaces.
These bearings are available as radial types (SF Series and FS Series) and angular contact thrust (SBT Series).
SF and FS Series include lubrication holes and grooves in both inner and the outer rings to permit relubrication through either the shaft or housing.
SBT angular contact bearings have lubricating holes and grooves in the outer ring for relubrication through the housing.
SF and FS Series are available with integral seals as SF…TT, SF…SS, FS…TT and FS…SS, and incorporate lip seals designed to retain lubricant and protect the spherical surfaces from external contamination.
A
Caption:
SF and FS
SF and FS
SF
BEARING TYPES SF & FS
These bearings are designed primarily to carry radial loads and handle moderate misalignment. The outer ring is usually fractured axially in one place, parallel to its axis, to permit assembly of the bearing rings, which do not have loading slots.
These types can also be supplied with double-fractured outer rings (designation SBB) when this feature is desired for easier assembly in an application.
SF…TT, SF…SS, FS…TT, FS…SS
These bearings are dimensionally interchangeable with the SF and FS Series, and have the same general characteristics. However, they also incorporate lip seals.
The seals are securely retained in the outer ring and will withstand high grease pressures during relubrication. Positive retention of the seals assures full distribution of the lubricant to all bearing surfaces. SF…TT and FS…TT incorporate two reinforced nitrile rubber seals. SF…SS and FS…SS are assembled with synthetic resin seals; Operating temperatures of the seals should not exceed 212° F (100° C).
SBT & SBDT
These bearings are designed for single direction thrust loading and some misalignment. Inner and outer rings are separable. The raceways are essentially hemispherical, and the rings are designed to provide maximum spherical raceway contact in the axial direction.
The SBDT style is designed for single direction thrust loading while the SBDT style is designed for thrust loading in two directions
Caption:
A
Caption:
Caption:
SBDT
SBT
•
B418 TIMKEN PRODUCTS CATALOG
Spherical Plain Bearings
INTERNAL CLEARANCES
Radial internal clearance is defined as the total possible movement of the inner ring relative to the outer ring in a radial direction. Axial internal clearance is the total possible movement of the inner relative to the outer ring in an axial direction.
Radial internal clearances listed for the SF and FS Series are for ?nish ground, unmounted bearings prior to fracture of the outer ring. The molybdenum disul?de coating reduces this clearance by a maximum of .05 mm (.002 in.). The maximum interference ?ts using suggested housing and shaft dimensions will maintain a satisfactory minimum internal clearance in the mounted condition, accommodating coating thickness, outer ring compression, and inner ring expansion.
A
B
LOAD RATINGS
DYNAMIC LOAD RATINGS
SF & FS
The dynamic load rating listed in the tables of dimensions is based on a maximum stress level of 85 megapascals (approximately 12,300 psi) between the sliding contact surfaces. It is the maximum load suggested for bearings subjected to intermittent operation with periodic lubrication.
The dynamic load rating is based on the radially projected area of the inner ring bore under the condition where, with the suggested ?tting practice and periodic lubrication, rotation normally takes place.
For intermittent loading and operation, the applied radial load should not exceed the dynamic load rating. For constant loading and continuous operation, the applied radial load should not exceed 75 percent of the dynamic load rating. For dynamic or static thrust loading, use 25 percent of the respective radial load rating value should be used. For combined radial and thrust ratings, consult your Timken representative.
SBT
The dynamic load rating is based on the same stress levels as SF shown above and is the maximum thrust load suggested for extended life with periodic lubrication. It is based on the axially projected area of the spherical surfaces in contact. Where the shaft shoulder supports high thrust loads, it is suggested that hardened shafts be employed.
EQUIVALENT THRUST LOAD
SBT
For combined radial and thrust loading under intermittent dynamic conditions, the equivalent thrust load (Te) must not exceed the dynamic load rating. For constant loading and continuous operation, the equivalent load (Te), or the axial load (T) when the radial load (R) is zero, must not exceed 70 percent of the dynamic load rating:
Te = T + 1.4R
Te = Equivalent thrust load per bearing T = Applied thrust load and ? or preload R = Applied radial load per bearing
The limit load rating of all spherical plain bearings listed is the maximum static load that can be applied to the bearing. This load should not be exceeded. The ultimate, or static fracture rating of the bearing is at least 1.5 times the limit load rating.
Shaft and housing stresses should be checked when the applied load approaches the limit load rating since the shaft or housing may then become the critical factor.
Caption:
A
TIMKEN PRODUCTS CATALOG B419
•
Caption:
MI S
ALI
G
NMENT
SPHERICAL PLAIN BEARINGS
MISALIGNMENT
In many applications, the degree of misalignment of the radial types of spherical plain bearings is determined by the side clearance between the yoke and the bearing housing as illustrated.
When the bearing is mounted without such restrictions, a larger misalignment can be accommodated: ? is the maximum angle of misalignment for sealed bearings as illustrated. If ? is exceeded, the seal lips will slide off the spherical surface. Seal effectiveness is then lost and damage to the seal lip will occur if contact is made between the seal lip and shaft shoulder.
Greater misalignment under light to medium loads is possible with unsealed plain radial bearings as shown by angle ?'. This requires limiting the shaft shoulder diameter to the suggested dimension (da) and also requires suf?cient side clearance for the outer ring and housing.
Misalignment greater than ?' reduces the load carrying ability of the radial plain spherical bearings. When extreme misalignment is present, the strength of the shaft in shear and bending should be carefully checked, since the shaft support may be some distance away from the bearing.
Type SBT angular contact bearing permits a tilting angle ? provided the housing shoulder clears the shaft. Such misalignment is limited by the bore of the outer ring touching the through shaft, as shown. A larger angle of misalignment is possible where a stub shaft is used. If the tilting angle exceeds ?, your Timken representative should be consulted for suggestions.
A
B
Side clearance between yoke and bearing housing
?
? '
d a
Maximum tilt
Maximum tilt
sealed bearing
unsealed bearing
?
?
Caption:
A
Maximum tilt
(provided housing shoulder clears shaft)
•
B420 TIMKEN PRODUCTS CATALOG
Spherical Plain Bearings
HOUSING DESIGN
Ba
Da
The housing should be strong enough to support the loads applied to the bearings without distortion or risk of fatigue damage.
When using a housing of the type illustrated, with a load applied in directions “X” or “Y”, the compressive yield strength of the housing material should be greater than the applied load divided by (Ba • D).
When the load is applied in direction “Y”, the yield strength of the housing in tension should be greater than the applied load times K/Ba(Da-D), where K is a stress concentration factor from Table 1.
The suggested housing bore tolerances closely approximate N7 tolerances. This produces an interference ?t that ensures proper rounding of the outer ring. Light metal housings or housings with thin cross sections may require a tighter ?t. An interference ?t in the housing is also necessary to prevent creeping by the outer ring with resultant wear of the housing bore and shoulder. Split housings should be avoided.
To resist thrust loads, the bearing should be mounted as shown in the mounting details above the table dimensions.
When plain angular contact bearings (SBT) are axially loaded, the housing expands. For proper and safe bearing function, it is vital to provide a substantial section for the housing. If the thrust limit load ratings are applied for these bearings, not only should the section of the housing be generous, but the housing bore diameter (db) must not be exceeded. This not only supports the thrust load, but strengthens the housing in the radial direction as well.
The suggested housing bore for the Type SBT angular contact bearing produces a tight transition ?t.
Y
d
D
A
B
X
TABLE 1 – STRESS CONCENTRATION FACTOR
Da/D K Da/D K Da/D K
1.2 1.8 1.8 2.4 3 3.7
1.4
HOUSING DESIGN
2 2
2.2 2.5
? d b
2.7 4 4.7
3.2 5 5.5
1.6
Housing section - angular contact bearing
SHAFT DESIGN
In applications with heavy radial loads, although alignment takes place at the spherical bearing surface, rotation or oscillation normally occurs between the bore of the inner ring and the shaft even though an interference ?t may have been used. For this reason, and to facilitate assembly, the shaft dimensions listed in the tables should be used.
To obtain satisfactory performance with heavy loads or under abrasive conditions, the shaft should be hardened to 655 VPN or 58 HRC minimum. Additionally, the shaft should have suf?cient strength to withstand the applied loads in both shear and bending. The surface finish of the bearing seat should not exceed 0.8 micrometers or 32 microinches (on the Ra scale). The shaft should always be supported as close to the inner ring as possible to minimize bending.
When the loads are light, it is possible to prevent rotation between the inner ring and shaft by using an ISO m6 shaft tolerance or by clamping across the inner ring. Under these conditions, a fully hardened shaft is not necessary.
When the bearing is loaded axially, the load is transmitted between the end face of the inner ring and the adjacent shaft shoulder. The shoulder surface must be of suf?cient strength and hardness not to deform permanently under load. If the inner ring is to rotate, the ?nish of this surface should not exceed 0.8 micrometers or 32 microinches (on the Ra scale).
A
Caption:
TIMKEN PRODUCTS CATALOG B421
•
SPHERICAL PLAIN BEARINGS
Caption:
LUBRICATION (SF, FS, SBT)
LUBRICATION (SF, SBT)
The dry ?lm lubricant (MoS2) is suf?cient for static applications and for relatively short periods of dynamic operation.
The bonds between the rings and MoS2 coating may be destroyed by any ?uid including oils, greases and water. Any abrasive material present on the dynamic bearing surfaces will ruin the MoS2 coating. If the bearing is subjected to such operating or environmental conditions, it is necessary to relubricate frequently.
The radial bearings, both with and without seals, have lubricating holes and grooves in both the inner and outer rings, permitting relubrication through either the shaft or the housing.
The angular contact bearings have lubricating holes and grooves in the outer ring for relubrication through the bearing housing. The lubrication grooves in the spherical bore of the outer ring traverse a pattern designed to provide effective lubrication. These grooves extend into the small bore of the ring, permitting relubrication through the end of the housing as illustrated.
The relubrication cycle will depend on the magnitude of the load, frequency and amplitude of oscillation, environmental conditions and the effectiveness of the sealing used to exclude foreign materials from the bearing surfaces.
If bearings are relubricated, the dynamic load rating depends on the ?lm strength of the added lubricant. High quality EP greases are suggested for best results.
A
B
SBT – Relubricatable mounting
TEMPERATURE
Spherical plain bearings without seals will operate satisfactorily up to temperatures of 392° F (200° C). For operation at greater temperatures, special materials and lubricants will be required. Operating temperatures for sealed bearings should not exceed 212° F (100° C).
SHAFT FITS
• The shaft diameters listed in the dimension tables show the suggested ?ts for normal service.
• The table below is to be used only for applications where a shaft interference ?t is required. Consult your Timken representative for suggestions.
Caption:
A
(SF, SFH, FS, FSH, SBT) BEARINGS,
Shaft Diameter Tolerance for Interference Fit for Inch and Metric Series
Shaft Tolerance m6
Bore Diameter, d
mm inch mm inch
over incl. over incl. high low high low
10 18
0.3937 0.7087 +0.018 +0.007 +0.0007 +0.0003
18 30
0.7087 1.1811 +0.021 +0.008 +0.0008 +0.0003
30 50
1.1811 1.9685 +0.025 +0.009 +0.0010 +0.0004
50 80
1.9685 3.1496 +0.030 +0.011 +0.0012 +0.0005
80 120
3.1496 4.7244 +0.035 +0.013 +0.0014 +0.0005
120 180
4.7244 7.0866 +0.040 +0.015 +0.0016 +0.0006
180 250
7.0866 9.8425 +0.046 +0.017 +0.0018 +0.0007
•
B422 TIMKEN PRODUCTS CATALOG
Spherical Plain Bearings
TOLERANCES
• Metric-inch conversions are shown in the following tables.
• Tolerances on pages B412-B420 list the nominal bearing dimensions.
• Tolerances for these dimensions are listed in Tables 1 through
4. They are expressed as variances from nominal.
TABLE 1 INNER RING (FS, FSH) BEARINGS, METRIC SERIES
Bore Diameter, d
Single Mean
Width, B1
Bore Diameter, dmp(1)
mm inch mm inch
mm in.
A
B
over incl. over incl. high low high low high low high low
10 18
0.3937 0.7087
+0 -0.008 +0 -0.0003
+0 -0.12
+0 -0.005
18 30
0.7087 1.1811
+0 -0.010 +0 -0.0004
+0 -0.12
+0 -0.005
30 50
1.1811 1.9685
+0 -0.012 +0 -0.0005
+0 -0.12
+0 -0.005
50 80
1.9685 3.1496
+0 -0.015 +0 -0.0006
+0 -0.15
+0 -0.006
80 120
3.1496 4.7244
+0 -0.020 +0 -0.0008
+0 -0.20
+0 -0.008
120 180
4.7244 7.0866
+0 -0.025 +0 -0.0010
+0 -0.25
+0 -0.010
180 250
7.0866 9.8425
+0 -0.030 +0 -0.0012
+0 -0.30
+0 -0.012
250 315
9.8425 12.4015
+0 -0.035 +0 -0.0014
+0 -0.35
+0 -0.014
(1) “Single Mean Diameter” is de?ned as the mean diameter in a single radial plane.
TABLE 2 OUTER RING (FS, FSH) BEARINGS, METRIC SERIES
Outside Diameter, D
Single Mean
Width, B
Outside Diameter, Dmp(2)
mm inch mm inch
mm in.
over incl. over incl. high low high low high low high low
18 30
0.7087 1.1811
+0 -0.009 +0 -0.0004
+0 -0.24
+0 -0.009
30 50
1.1811 1.9685
+0 -0.011 +0 -0.0004
+0 -0.24
+0 -0.009
50 80
1.9685 3.1496
+0 -0.013 +0 -0.0005
+0 -0.30
+0 -0.012
80 120
3.1496 4.7244
+0 -0.015 +0 -0.0006
+0 -0.40
+0 -0.016
120 150
4.7244 5.9055
+0 -0.018 +0 -0.0007
+0 -0.50
+0 -0.020
150 180
5.9055 7.0866
+0 -0.025 +0 -0.0010
+0 -0.50
+0 -0.020
180 250
7.0866 9.8425
+0 -0.030 +0 -0.0012
+0 -0.60
+0 -0.024
250 315
9.8425 12.4015
+0 -0.035 +0 -0.0014
+0 -0.70
+0 -0.028
315 400
12.4015 15.7480 +0 -0.040 +0 -0.0016
+0 -0.80
+0 -0.031
400 500
15.7480 19.6850 +0 -0.045 +0 -0.0018
+0 -0.90
+0 -0.035
(2) Tolerances apply before coating with MoS2 and fracturing outer ring.
“Single Mean Diameter” is de?ned as the mean diameter in a single radial plane.
TABLE 3 INNER RING (SF, SFH, SBT, SBDT) BEARINGS, INCH SERIES
Bore Diameter, d
Single Mean
Width, B1
Bore Diameter, dmp(1)
mm inch mm inch
mm in.
Caption:
over incl. over incl. high low high low high low high low
11.112 50.800
0.4375 2.0000
+0 -0.013 +0 -0.0005
+0 -0.13
+0 -0.005
A
50.800 76.200
2.0000 3.0000
+0 -0.015 +0 -0.0006
+0 -0.13
+0 -0.005
76.200 120.650
3.0000 4.7500
+0 -0.020 +0 -0.0008
+0 -0.13
+0 -0.005
120.6500 152.400
4.7500 6.0000
+0 -0.025 +0 -0.0010
+0 -0.13
+0 -0.005
(1) “Single Mean Diameter” is de?ned as the mean diameter in a single radial plane.
TABLE 4 OUTER RING (SF, SFH, SBT, SBDT) BEARINGS, INCH SERIES
Outside Diameter, D
Single Mean
Width, B
Outside Diameter, Dmp(2)
mm inch mm inch
mm in.
over incl. over incl. high low high low high low high low
20.638 50.800
0.8125 2.0000
+0 -0.013 +0 -0.0005
+0 -0.13
0 -0.005
50.800 80.962
2.0000 3.1875
+0 -0.015 +0 -0.0006
+0 -0.13
0 -0.005
80.962 120.650
3.1875 4.7500
+0 -0.020 +0 -0.0008
+0 -0.13
0 -0.005
120.650 177.800
4.7500 7.0000
+0 -0.025 +0 -0.0010
+0 -0.13
0 -0.005
177.800 222.250
7.0000 8.7500
+0 -0.030 +0 -0.0012
+0 -0.13
0 -0.005
(2) Tolerances apply before coating with MoS2 and fracturing outer ring.
“Single Mean Diameter” is de?ned as the mean diameter in a single radial plane.
TIMKEN PRODUCTS CATALOG B423
•
SPHERICAL PLAIN BEARINGS
RADIAL BEARINGS TYPE SF
Caption:
• Unit assembly consisting of a solid, spherical O.D. inner ring and a spherical I.D. outer ring.
• Outer ring has a single fracture to permit assembly.
• Both inner and outer rings are phosphate treated and then coated with molybdenum disulphide (MoS2).
• Bearings 7SF12 through 50SBB80 are available with reinforced rubber seals. To order, add suf?x “-TT” to bearing designation – Example: 25SF40-TT.
• Bearings 27SF44 through 608BB96 are available with synthetic resin seals. To order, add suf?x “-SS” to bearing designation
– Example: 27SF44-SS.
• Before ordering any bearing, check for availability.
• Metric-inch conversions have been included. The controlling dimensions are in inches.
• For tolerances, see Tables 3 and 4. Dimensions listed are after the bearing has been coated with molybdenum disulphide.
• The axial internal clearance is approximately three times the radial internal clearance.
• ? is the maximum tilting angle for sealed radial bearings.
To utilize the maximum tilting angle ? for unsealed radial bearings, the suggested shaft shoulder diameter, da, shown in the drawing on the facing page, must not be exceeded.
• Dimensions and locations of lubrication holes and grooves may be obtained from your Timken representative.
Radial Bearings Type SF
A
B
B1
B1
d1
d1
D
d
D
d
B
B
Type SF
Types SF-TT, SF-SS
DIMENSIONS - LOAD RATINGS
Bearing Bore Outside Diameter Inner Ring Outer ring Spherical Diameter Radial Clearance* Load Ratings Number d D Width Width d1 (unmounted) Radial Dynamic
B1 B Limit Radial Load Load
(Ref.) mm in. Rating Rating mm in. mm in. mm in. mm in. mm in. min. max. min. max. lbf. lbf.
A
5SF8 12.700 0.5000 22.225 0.8750 11.10 0.437 9.52 0.375 18.26 0.719 0.004 0.008 0.10 0.20 8330 2690
6SF10 15.875 0.6250 26.988 1.0625 13.89 0.547 11.91 0.469 22.83 0.899 0.004 0.008 0.10 0.20 13000 4200
7SF12 19.050 0.7500 31.750 1.2500 16.66 0.656 14.27 0.562 27.43 1.080 0.005 0.009 0.13 0.23 18700 6070
8SF14 22.225 0.8750 36.512 1.4375 19.43 0.765 16.66 0.656 31.95 1.258 0.005 0.009 0.13 0.23 25500 8250
10SF16 25.400 1.0000 41.275 1.6250 22.22 0.875 19.05 0.750 36.50 1.437 0.005 0.009 0.13 0.23 33300 10800 12SF20 31.750 1.2500 50.800 2.0000 27.76 1.093 23.80 0.937 45.59 1.795 0.005 0.009 0.13 0.23 52000 16800 13SF22 34.925 1.3750 55.562 2.1875 30.15 1.187 26.19 1.031 49.20 1.937 0.005 0.009 0.13 0.23 61300 20100 15SF24 38.100 1.5000 61.912 2.4375 33.32 1.312 28.58 1.125 54.74 2.155 0.005 0.009 0.13 0.23 75000 24300
17SF28 44.450 1.7500 71.438 2.8125 38.89 1.531 33.32 1.312 63.88 2.515 0.005 0.009 0.13 0.23 102000 33000 20SF32 50.800 2.0000 80.962 3.1875 44.45 1.750 38.10 1.500 73.02 2.875 0.005 0.009 0.13 0.23 133000 43200 22SF36 57.150 2.2500 90.488 3.5625 50.01 1.969 42.85 1.687 82.17 3.235 0.006 0.010 0.15 0.25 169000 54600 25SF40 63.500 2.5000 100.012 3.9375 55.55 2.187 47.62 1.875 91.19 3.590 0.006 0.010 0.15 0.25 208000 67400
27SF44 69.850 2.7500 111.125 4.3750 61.11 2.406 52.37 2.062 100.33 3.950 0.006 0.010 0.15 0.25 252000 81600 30SF48 76.200 3.0000 120.650 4.7500 66.68 2.625 57.15 2.250 109.52 4.312 0.006 0.010 0.15 0.25 300000 97100 32SF52 82.550 3.2500 130.175 5.1250 72.24 2.844 61.90 2.437 118.74 4.675 0.007 0.011 0.18 0.28 353000 114000 35SF56 88.900 3.5000 139.700 5.5000 77.77 3.062 66.68 2.625 128.02 5.040 0.007 0.011 0.18 0.28 410000 132000
37SF60 95.250 3.7500 149.225 5.8750 83.34 3.281 71.42 2.812 136.91 5.390 0.007 0.011 0.18 0.28 467000 152000 40SF64 101.600 4.0000 158.750 6.2500 88.90 3.500 76.20 3.000 146.05 5.750 0.007 0.011 0.18 0.28 533000 173000 45SBB72 114.300 4.5000 177.800 7.0000 100.00 3.937 85.72 3.375 164.46 6.475 0.007 0.011 0.18 0.28 673000 218000
50SBB80 127.000 5.0000 196.850 7.7500 111.13 4.375 95.25 3.750 182.63 7.190 0.007 0.011 0.18 0.28 833000 270000
60SBB96 152.400 6.0000 222.250 8.7500 120.65 4.750 104.78 4.125 207.16 8.156 0.007 0.011 0.18 0.28 1050000 351000
* Prior to coating with MoS2 and fracturing outer ring.
Caption:
•
B424 TIMKEN PRODUCTS CATALOG
Spherical Plain Bearings
MOUNTING
• Housing bore dimensions listed below are applicable to bearings mounted in steel.
• Because of fracturing, the outer ring may be slightly out-of-round.
• Roundness will be restored when the bearing is mounted in a housing of suf?cient cross section.
• Preferred shaft and housing bore dimensions are listed below.
• Refer to the m6 tolerance limits per ANSI B4.1 in the Shaft Diameter Tolerance table on page B410 for a shaft interference ?t.
MOUNTING
A
B
A
?
Maximum tilt
for sealed bearing
MOUNTING DIMENSIONS
Weight Tilting Angle Shaft Shaft Housing Shaft Diameter Housing Bore
Shoulder Fillet Fillet S H Diameter Radius* Radius
? ?' da ra† rb‡
(Approx.) (Max.) (Max.) mm in. mm in.
kg lbs. deg. deg. mm in. mm in. mm in. max. min. max. min. max. min. min. max.
0.020 0.044 5.5 14 14.3 0.56 * * 0.6 0.022 12.695 12.685 0.4998 0.4994 22.197 22.217 0.8739 0.8747
0.036 0.079 6 14 17.8 0.70 * * 0.8 0.032 15.870 15.860 0.6248 0.6244 26.960 26.980 1.0614 1.0622
0.057 0.126 6 14.5 21.4 0.84 * * 0.8 0.032 19.042 19.029 0.7497 0.7492 31.717 31.742 1.2487 1.2497
0.087 0.193 6 14.5 25.0 0.98 * * 0.8 0.032 22.217 22.204 0.8747 0.8742 36.479 36.504 1.4362 1.4372
0.649 1.430 6 15.5 50.0 1.97 * * 0.8 0.032 44.440 44.425 1.7496 1.7490 71.399 71.429 2.8110 2.8122
0.939 2.070 6 15.5 57.2 2.25 * * 0.8 0.032 50.790 50.772 1.9996 1.9989 80.914 80.950 3.1856 3.1870
1.324 2.920 6 14 65.1 2.56 * * 0.8 0.032 57.140 57.122 2.2496 2.2489 90.439 90.475 3.5606 3.5620
1.855 4.090 6 14 72.2 2.84 * * 0.8 0.032 63.490 63.472 2.4996 2.4989 99.964 100.000 3.9356 3.9370
? '
Maximum tilt
r b
d a
d a
r a H
S
Mounting detail
for bearing without seals
0.125 0.276 6 14.5 28.6 1.12 * * 0.8 0.032 25.392 25.379 0.9997 0.9992 41.242 41.267 1.6237 1.6247
0.234 0.516 6 14.5 35.7 1.41 * * 0.8 0.032 31.740 31.725 1.2496 1.2490 50.762 50.792 1.9985 1.9997
0.349 0.770 5.5 14 38.9 1.53 * * 0.8 0.032 34.915 34.900 1.3746 1.3740 55.524 55.554 2.1860 2.1872
0.424 0.934 6 14.5 43.3 1.70 * * 0.8 0.032 38.090 38.075 1.4996 1.4990 61.874 61.904 2.4360 2.4372
Caption:
2.440 5.380 6 12 79.4 3.12 0.6 0.022 0.8 0.032 69.840 69.822 2.7496 2.7489 111.077 111.113 4.3731 4.3745
3.116 6.870 6 12 86.5 3.41 0.6 0.022 0.8 0.032 76.190 76.172 2.9996 2.9989 120.594 120.635 4.7478 4.7494
3.914 8.630 6 12 94.1 3.70 0.6 0.022 0.8 0.032 82.537 82.514 3.2495 3.2486 130.119 130.160 5.1228 5.1244
4.853 10.700 6 12 101.0 3.97 0.6 0.022 0.8 0.032 88.887 88.864 3.4995 3.4986 139.644 139.685 5.4978 5.4994
5.897 13.000 6 12 108.0 4.25 0.6 0.022 0.8 0.032 95.237 95.214 3.7495 3.7486 149.169 149.210 5.8728 5.8744 7.076 15.600 6 11.5 116.0 4.56 0.6 0.022 0.8 0.032 101.587 101.564 3.9995 3.9986 158.694 158.735 6.2478 6.2494 9.934 21.900 6 12 130.0 5.12 0.8 0.032 1.1 0.044 114.287 114.264 4.4995 4.4986 177.744 177.785 6.9978 6.9994
13.472 29.700 6 12 144.0 5.69 0.8 0.032 1.1 0.044 126.985 126.960 4.9994 4.9984 196.784 196.830 7.7474 7.7492
17.600 38.800 5 10.5 168.0 6.59 0.8 0.032 1.1 0.044 152.385 152.360 5.9994 5.9984 222.184 222.230 8.7474 8.7492
* For bearing sizes 5SF8 through 25SF40, shaft and shoulder should be undercut to eliminate ?llet. † Equal to minimum inner ring bore chamfer.
‡ Equal to minimum outer ring O.D. chamfer.
TIMKEN PRODUCTS CATALOG B425
•
SPHERICAL PLAIN BEARINGS
RADIAL BEARINGS TYPE FS
Caption:
• Type FS spherical plain radial bearing is a unit assembly consisting of a solid, spherical O.D. inner ring and a spherical
I.D. outer ring.
• The outer ring has a single fracture to permit assembly. Both inner and outer rings are phosphate treated and then coated with molybdenum disulphide (MoS2).
• Bearings 16FS30 through 60FS90 are available with reinforced rubber seals. To order, add suf?x “TT” to bearing designation -
Example: 16FS30-TT.
• Bearings 70FS105 through 300FS430 are available with synthetic resin seals. To order, add suf?x “SS” to bearing designation - Example: 70FS105-SS.
• Before ordering any bearing, check for availability.
• Type FS bearings are a metric series which follows proposed International Standards Organization (ISO) standards. Metric-Inch conversions given are for the convenience of the user. The controlling dimensions are in millimeters.
• For tolerances of nominal dimensions see the tables 1 and 2 on page B411. Dimensions listed are before coating with molybdenum disulphide. The axial internal clearance is approximately three times the radial internal clearance.
• ? is the maximum tilting angle for sealed radial bearings. To utilize the maximum tilting angle for unsealed radial bearings the suggested shaft shoulder diameter da1 shown in the drawing on facing page must not be exceeded.
• Dimensions and locations of lubrication holes and grooves may be obtained from your Timken representative.
A
B
Radial Bearings Type SF
B1
B1
d1
d1
D
d
D
d
B
B
Type SF
Type FS
Types SF-TT, SF-SS
Type FS-TT, FS-SS
DIMENSIONS - LOAD RATINGS
Bearing Bore Outside Diameter Inner Ring Outer ring Spherical Diameter Radial Clearance* Load Ratings Number d D Width Width d1 (unmounted) Radial Dynamic
B1 B Limit Radial Load Load
(Ref.) mm in. Rating Rating mm in. mm in. mm in. mm in. mm in. min. max. min. max. lbf. lbf.
12FS22 12 .4724 22 0.8661 10 .394 7 .276 19 .748 0.10 0.22 .004 .009 8630 2290 14FS26 14 .5512 26 1.0236 12 .472 9 .354 22 .866 0.10 0.22 .004 .009 11600 3210 16FS30 16 .6300 30 1.1811 14 .551 10 .394 25 .984 0.10 0.22 .004 .009 14400 4280 20FS35 20 .7874 35 1.3780 16 .630 12 .472 30 1.181 0.12 0.24 .005 .010 21500 6110
24FS42 24 .9449 42 1.6142 20 .787 16 .630 36 1.417 0.12 0.24 .005 .010 31000 9170 30FS47 30 1.1811 47 1.8504 22 .866 18 .709 41 1.614 0.12 0.24 .005 .010 40200 12600 35FS55 35 1.3780 55 2.1654 25 .984 20 .787 48 1.890 0.12 0.24 .005 .010 55100 16700 40FS62 40 1.5748 62 2.4409 28 1.102 22 .866 55 2.165 0.12 0.24 .005 .010 72300 21400
45FS68 45 1.7717 68 2.6772 32 1.260 25 .984 60 2.362 0.12 0.24 .005 .010 86100 27500
50FS75 50 1.9685 79 2.9528 35 1.378 28 1.102 67 2.638 0.12 0.24 .005 .010 107000 33400
60FS90 60 2.3622 90 3.5433 44 1.732 36 1.417 81 3.150 0.14 0.26 .006 .011 157000 50400
70FS105 70 2.7559 105 4.1339 49 1.929 40 1.575 94 3.701 0.14 0.26 .006 .011 211000 65500 80FS120 80 3.1496 120 4.7244 55 2.165 45 1.772 107 4.213 0.14 0.26 .006 .011 274000 84100 90FS130 90 3.5433 130 5.1181 60 2.362 50 1.968 117 4.606 0.14 0.26 .006 .011 327000 103000 100FS150 100 3.9370 150 5.9055 70 2.756 55 2.165 134 5.276 0.14 0.26 .006 .011 429000 134000
110FS160 110 4.3307 160 6.2992 70 2.756 55 2.165 143 5.630 0.14 0.26 .006 .011 489000 147000 120FS180 120 4.7244 180 7.0866 85 3.346 70 2.756 160 6.299 0.14 0.26 .006 .011 612000 195000 140FS210 140 5.5118 210 8.2677 90 3.543 70 2.756 187 7.362 0.16 0.28 .006 .011 836000 241000 160FS230 160 6.2992 230 9.0551 105 4.134 80 3.150 206 8.110 0.16 0.28 .006 .011 1020000 321000
180FS260 180 7.0866 260 10.2362 105 4.134 80 3.150 234 9.213 0.16 0.28 .006 .011 1300000 361000 200FS290 200 7.8740 290 11.4173 130 5.118 100 3.937 265 10.433 0.18 0.30 .007 .012 1680000 497000 220FS320 220 8.6614 320 12.5984 135 5.315 100 3.937 286 11.260 0.18 0.30 .007 .012 1960000 568000 240FS340 240 9.4488 340 13.3858 140 5.512 100 3.937 306 12.047 0.18 0.30 .007 .012 2240000 642000
260FS370 260 10.2362 370 14.5669 150 5.906 110 4.331 333 13.110 0.20 0.32 .008 .013 2650000 745000 280FS400 280 11.0236 400 15.7480 155 6.102 120 4.724 360 14.173 0.20 0.32 .008 .013 3100000 829000 300FS430 300 11.8110 430 16.9291 165 6.496 120 4.724 386 15.197 0.20 0.32 .008 .013 3560000 946000
* Prior to fracturing outer ring.
Caption:
A
•
B426 TIMKEN PRODUCTS CATALOG
Spherical Plain Bearings
MOUNTING
• Due to fracturing, the outer ring may be slightly out-of-round. Roundness will be restored, however, when the bearing is mounted in a housing of suf?cient cross section.
• The preferred shaft tolerance is f6 as listed below per ANSI B4.2. To obtain a shaft interference ?t, refer to the m6 tolerance limits listed in the Shaft Diameter Tolerance table on page B410.
LOAD RATING
• The “dynamic load rating” is the maximum load suggested for extended life with periodic lubrication. It is based upon the radially projected area of the inner ring bore and an allowable stress level of 85 megapascals (approximately 12,300 psi).
• For intermittent loading and intermittent operation, the applied radial load should not exceed the dynamic load rating. For constant loading and continuous operation, the applied radial load should not exceed 75 percent of the dynamic load rating. For dynamic or static thrust loading, use 25 percent of respective radial load values. For combined radial and thrust loading, consult your Timken representative.
• The “limit load rating” is the maximum static load that
can be applied to a Timken spherical plain bearing. Shaft and housing stresses should be checked when the load approaches the limit load rating since the shaft or housing may then become the critical member. The ultimate, or static fracture, rating of the bearing is at least 1.5 times the limit load rating.
• Load ratings are given in pounds-force:
1 lbf = 0.454kgf = 4.448 N.
A
B
MOUNTING
?
? '
r b
d a
d a
r a H
S
Maximum tilt
Maximum tilt
Mounting detail
for sealed bearing
for bearing without seals
MOUNTING DIMENSIONS
Weight Tilting Angle Shaft Shaft Housing Shaft Diameter Housing Bore
Shoulder Fillet Fillet S H
Diameter Radius* Radius
? ?' da ra† rb‡
(Approx.) (Max.) (Max.) mm in. mm in.
kg lbs. deg. deg. mm in. mm in. mm in. max. min. max. min. max. min. min. max.
.038 10.0 11.5 16 .63 0.5 .02 0.5 .02 11.984 11.973 .4718 .4714 21.977 21.995 .8650 .8658 .065 8.5 14.5 18 .71 0.5 .02 0.5 .02 13.984 13.973 .5506 .5502 25.972 25.993 1.0225 1.0233 .115 10.0 16.0 20 .79 0.5 .02 0.5 .02 15.984 15.973 .6293 .6289 29.972 29.993 1.1800 1.1808 .149 8.5 14.0 25 .98 0.5 .02 0.6 .02 19.980 19.967 .7866 .7861 34.967 34.992 1.3767 1.3777
.257 7.0 12.5 29 1.14 0.5 .02 0.6 .02 23.980 23.967 .9441 .9436 41.967 41.992 1.6522 1.6532 .337 6.0 10.5 34 1.38 0.5 .02 0.6 .02 29.980 29.967 1.1803 1.1798 46.967 46.992 1.8491 1.8501 .523 6.5 10.5 40 1.61 0.6 .02 0.8 .03 34.975 34.959 1.3770 1.3764 54.961 54.991 2.1638 2.1650 .729 7.0 10.5 47 1.85 0.6 .02 0.8 .03 39.975 39.959 1.5738 1.5732 61.961 61.991 2.4394 2.4406
.948 7.5 10.5 50 2.01 0.6 .02 0.8 .03 44.975 44.959 1.7707 1.7701 67.961 67.991 2.6756 2.6768
1.27 6.5 10.0 56 2.24 0.6 .02 0.8 .03 49.975 49.959 1.9675 1.9669 74.961 74.991 2.9512 2.9524
2.32 6.5 11.0 66 2.64 0.8 .03 1.0 .04 59.970 59.951 2.3610 2.3603 89.955 89.990 3.5415 3.5429
A
Caption:
3.53 6.0 9.5 80 3.15 0.8 .03 1.0 .04 69.970 69.951 2.7547 2.7540 104.955 104.990 4.1321 4.1335
5.20 6.0 7.5 92 3.62 0.8 .03 1.0 .04 79.970 79.951 3.1484 3.1477 119.955 119.990 4.7226 4.7240
6.28 5.5 7.5 100 3.94 1.0 .04 1.0 .04 89.964 89.942 3.5419 3.5410 129.948 129.988 5.1161 5.1177
10.1 7.0 8.5 114 4.49 1.0 .04 1.0 .04 99.964 99.942 3.9356 3.9347 149.948 149.988 5.9035 5.9051
10.9 6.0 7.5 125 4.92 1.0 .04 1.0 .04 109.964 109.942 4.3293 4.3284 159.948 159.988 6.2972 6.2988
18.1 6.0 7.5 136 5.35 1.0 .04 1.0 .04 119.964 119.942 4.7230 4.7221 179.948 179.988 7.0846 7.0862
25.6 6.5 7.0 164 6.46 1.0 .04 1.0 .04 139.957 139.932 5.5101 5.5091 209.940 209.986 8.2654 8.2674
32.3 7.5 9.0 177 6.97 1.0 .04 1.0 .04 159.957 159.932 6.2975 6.2965 229.940 229.986 9.0528 9.0548
42.8 6.5 7.0 209 8.23 1.0 .04 1.0 .04 179.957 179.932 7.0849 7.0839 259.934 259.986 10.2336 10.2356
66.5 7.0 7.5 231 9.09 1.0 .04 1.0 .04 199.950 199.921 7.8720 7.8709 289.934 289.986 11.4147 11.4167
82.3 7.5 8.0 252 9.92 1.0 .04 1.0 .04 219.950 219.921 8.6594 8.6583 319.927 319.984 12.5956 12.5978
90.1 8.0 9.0 272 10.70 1.0 .04 1.0 .04 239.950 239.921 9.4468 9.4457 339.927 339.984 13.3830 13.3852
17 7.0 8.5 297 11.69 1.0 .04 1.0 .04 259.944 259.912 10.2340 10.2327 369.927 369.984 14.5641 14.5663 47 6.0 7.0 325 12.80 1.0 .04 1.0 .04 279.944 279.912 11.0214 11.0201 399.927 399.984 15.7452 15.7474 77 7.0 9.0 349 13.74 1.0 .04 1.0 .04 299.944 299.912 11.8088 11.8075 429.920 429.983 16.9260 16.9285
* For bearing sizes 5SF8 through 25SF40, shaft and shoulder should be undercut to eliminate ?llet. † Equal to minimum inner ring bore chamfer.
‡ Equal to minimum outer ring O.D. chamfer.
TIMKEN PRODUCTS CATALOG B427
•
SPHERICAL PLAIN BEARINGS
RADIAL BEARINGS TYPE FSH
Caption:
• The FSH spherical plain radial bearing is a unit assembly consisting of a solid spherical O.D. inner ring and a spherical
I.D. outer ring.
• The outer ring has a single fracture to permit assembly. Both inner and outer rings are phosphate treated and then coated with molybdenum disulphide (MoS2). The type FSH bearing is similar to type FS, but the inner ring bore diameter has been reduced and the width made greater to increase the spherical surface. This permits greater misalignment while maintaining full bearing contact.
• Bearings 14FSH30 through 50FSH90 are available with reinforced rubber seals. To order, add suf?x “TT” to bearing designation - Example: 14FSH30-TT.
• Bearings 60FSH105 through 280FSH430 are available with synthetic resin seals. To order, add suf?x “SS” to bearing designation - Example: 60FSH105-SS.
• Before ordering any bearing, check for availability.
DIMENSIONS
• Type FSH bearings are a metric series which follows proposed International Standards Organization (ISO) standards. Metric Inch conversions given are for the convenience of the user. The controlling dimensions are in millimeters.
DIMENSIONS - LOAD RATINGS
• For tolerances of nominal dimensions, see Tables 1 and 2 on page B411. Dimensions listed are before coating with molybdenum disulphide. The axial internal clearance is approximately three times the radial internal clearance.
• ? is the maximum tilting angle for sealed radial bearings. To utilize the maximum tilting angle for unsealed radial bearings, the suggested shaft shoulder diameter da1 shown in the drawing on facing page must not be exceeded.
• Dimensions and locations of lubrication holes and grooves may be obtained from your Timken representative.
A
B
Radial Bearings Type SFH
B1
B1
d1
d1
D
d
D
d
B
B
Type FSH Type SFH TT, SFH SS
Type SFH Types SFH-TT, SFH-SS
Bearing Bore Outside Diameter Inner Ring Outer ring Spherical Diameter Radial Clearance* Load Ratings Number d D Width Width d1 (unmounted) Radial Dynamic
B1 B Limit Radial Load Load
(Ref.) mm in. Rating Rating mm in. mm in. mm in. mm in. mm in. min. max. min. max. lbf. lbf.
12FSH26 12 .4724 26 1.0236 15 .591 9 .354 22 .866 0.10 0.22 .004 .009 11600 3440 14FSH30 14 .5512 30 1.1811 16 .630 10 .394 25 .984 0.10 0.22 .004 .009 14400 4280 16FSH35 16 .6300 35 1.3780 20 .787 12 .472 30 1.181 0.12 0.24 .005 .010 21500 6110 20FSH42 20 .7874 42 1.6142 25 .984 16 .630 36 1.417 0.12 0.24 .005 .010 31000 9550 24FSH47 24 .9449 47 1.8504 28 1.102 18 .709 41 1.614 0.12 0.24 .005 .010 40200 12800
30FSH55 30 1.1811 55 2.1654 32 1.260 20 .787 48 1.890 0.12 0.24 .005 .010 55100 18300 35FSH62 35 1.3780 62 2.4409 35 1.378 22 .866 55 2.165 0.12 0.24 .005 .010 72300 23400 40FSH68 40 1.5748 68 2.6772 40 1.575 25 .984 60 2.362 0.12 0.24 .005 .010 86100 30600 45FSH75 45 1.7717 75 2.9528 43 1.693 28 1.102 67 2.638 0.12 0.24 .005 .010 107000 37000 50FSH90 50 1.9685 90 3.5433 56 2.205 36 1.417 81 3.150 0.14 0.26 .006 .011 157000 53500
60FSH105 60 2.3622 105 4.1339 63 2.480 40 1.575 94 3.701 0.14 0.26 .006 .011 211000 72200 70FSH120 70 2.7559 120 4.7244 70 2.756 45 1.772 107 4.213 0.14 0.26 .006 .011 274000 93600 80FSH130 80 3.1496 130 5.1181 75 2.953 50 1.968 117 4.606 0.14 0.26 .006 .011 327000 115000 90FSH150 90 3.5433 150 5.9055 85 3.346 55 2.165 134 5.276 0.14 0.26 .006 .011 429000 146000 100FSH160 100 3.9370 160 6.2992 85 3.346 55 2.165 143 5.630 0.14 0.26 .006 .011 489000 162000
110FSH180 110 4.3307 180 7.0866 100 3.937 70 2.756 160 6.299 0.14 0.26 .006 .011 612000 210000 120FSH210 120 4.7244 210 8.2677 115 4.528 70 2.756 187 7.362 0.16 0.28 .006 .011 836000 264000 140FSH230 140 5.5118 230 9.0551 130 5.118 80 3.150 206 8.110 0.16 0.28 .006 .011 1020000 348000 160FSH260 160 6.2992 260 10.2362 135 5.315 80 3.150 234 9.213 0.16 0.28 .006 .011 1300000 413000 180FSH290 180 7.0866 290 11.4173 155 6.102 100 3.937 265 10.433 0.18 0.30 .007 .012 1680000 533000
200FSH320 200 7.8740 320 12.5984 165 6.496 100 3.937 286 11.260 0.18 0.30 .007 .012 1960000 631000 220FSH340 220 8.6614 340 13.3858 175 6.890 100 3.937 306 12.047 0.18 0.30 .007 .012 2240000 736000 240FSH370 240 9.4488 370 14.5669 190 7.480 110 4.331 333 13.110 0.20 0.32 .008 .013 2650000 871000 260FSH400 260 10.2362 400 15.7480 205 8.071 120 4.724 360 14.173 0.20 0.32 .008 .013 3100000 1020000 280FSH430 280 11.0236 430 16.9291 210 8.268 120 4.724 386 15.197 0.20 0.32 .008 .013 3560000 1120000
* Prior to fracturing outer ring.
Caption:
A
•
B428 TIMKEN PRODUCTS CATALOG
Spherical Plain Bearings
MOUNTING
• The housing bore dimensions given below are applicable to bearings mounted in steel.
• Due to fracturing, the outer ring may be slightly out-of-round. Roundness will be restored, however, when the bearing is mounted in a housing of suf?cient cross section.
• The preferred shaft tolerance is f6 as listed below per ANSI B4.2. To obtain a shaft interference ?t, refer to the m6 tolerance limits listed in the Shaft Diameter Tolerance table on page B410.
LOAD RATING
• The “dynamic load rating” is the maximum load suggested for extended life with periodic lubrication. It is based upon the radially projected area of the inner ring bore and allowable stress level of 85 megapascals (approximately 12,300 psi).
• For intermittent loading and intermittent operation, the applied radial load should not exceed the dynamic load rating for constant loading and continuous operation, the applied radial load should not exceed 75 percent of the dynamic load rating. For dynamic or static thrust loading, use 25 percent of respective radial load rating values. For combined radial and thrust loading, consult your Timken representative.
• The “limit load rating” is the maximum static load that
can be applied to a Timken spherical plain bearing. Shaft
and housing stresses should be checked when the load approaches the limit load rating since the shaft or housing may then become the critical member. The ultimate or static fracture rating of the bearing is at least 1.5 times the limit load rating.
• Load ratings are given in pounds force:
1 lbf = 0.454 kgf = 4.448N.
A
B
MOUNTING
?
? '
r b
d a
d a
r a H
S
Maximum tilt
Maximum tilt
Mounting detail
for sealed bearing
for bearing without seals
MOUNTING DIMENSIONS
Weight Tilting Angle Shaft Shaft Housing Shaft Diameter Housing Bore
Shoulder Fillet Fillet S H
Diameter Radius* Radius
? ?' da ra† rb‡
(Approx.) (Max.) (Max.) mm in. mm in.
lbs. deg. deg. mm in. mm in. mm in. max. min. max. min. max. min. min. max.
.069 18.5 25.0 16 .63 0.5 .02 0.5 .02 11.984 11.973 .4718 .4714 25.972 25.993 1.0225 1.0233 .130 16.0 22.0 19 .75 0.5 .02 0.5 .02 13.984 13.973 .5506 .5502 29.972 29.993 1.1800 1.1808 .171 18.0 27.0 21 .83 0.5 .02 0.6 .02 15.984 15.973 .6293 .6289 34.967 34.992 1.3767 1.3777 .298 17.5 26.5 24 .94 0.5 .02 0.6 .02 19.980 19.967 .7866 .7861 41.967 41.992 1.6522 1.6532 .397 17.0 23.0 29 1.14 0.5 .02 0.6 .02 23.980 23.963 .9441 .9436 46.967 46.992 1.8491 1.8501
.574 17.0 24.0 34 1.34 0.5 .02 0.8 .03 29.980 29.967 1.1803 1.1798 54.961 54.991 2.1638 2.1650 .794 15.5 24.5 39 1.54 0.6 .02 0.8 .03 34.975 34.959 1.3770 1.3764 61.961 61.991 2.4394 2.4406 .982 17.0 21.0 44 1.73 0.6 .02 0.8 .03 39.975 39.959 1.5738 1.5732 67.961 67.991 2.6756 2.6768
1.31 15.0 20.0 50 1.97 0.6 .02 0.8 .03 44.975 44.959 1.7707 1.7701 74.961 74.991 2.9512 2.9524
2.63 17.0 23.5 57 2.24 0.6 .02 1.0 .04. 49.975 49.959 1.9675 1.9669 89.955 89.990 3.5415 3.5429
Caption:
A
3.91 16.5 22.5 67 2.64 0.8 .03 1.0 .04 59.970 59.951 2.3610 2.3603 104.955 104.990 4.1321 4.1335 5.62 15.5 20.5 77 3.03 0.8 .03 1.0 .04 69.970 69.951 2.7547 2.7540 119.955 119.990 4.7226 4.7240 6.66 14.5 18.5 87 3.43 0.8 .03 1.0 .04 79.970 79.951 3.1484 3.1477 129.948 129.988 5.1161 5.1177
10.4 15.0 19.5 98 3.86 1.0 .04 1.0 .04 89.964 89.942 3.5419 3.5410 149.948 149.988 5.9035 5.9051
11.5 13.5 18.0 110 4.33 1.0 .04 1.0 .04 99.964 99.942 3.9356 3.9347 159.948 159.988 6.2972 6.2988
17.9 12.5 15.5 122 4.80 1.0 .04 1.0 .04 109.964 109.942 4.3293 4.3284 179.948 179.988 7.0846 7.0862
29.7 15.5 23.5 132 5.20 1.0 .04 1.0 .04 119.964 119.942 4.7230 4.7221 209.940 209.986 8.2654 8.2674
35.8 16.0 20.5 152 5.98 1.0 .04 1.0 .04 139.957 139.932 5.5101 5.5091 229.940 229.986 9.0528 9.0548
48.9 15.0 21.0 176 6.93 1.0 .04 1.0 .04 159.957 159.932 6.2975 6.2965 259.934 259.986 10.2336 10.2356
71.5 13.0 20.5 196 7.72 1.0 .04 1.0 .04 179.957 179.932 7.0849 7.0839 289.934 289.986 11.4147 11.4167
88.2 14.5 19.5 220 8.66 1.0 .04 1.0 .04 199.950 199.921 7.8720 7.8709 319.927 319.984 12.5956 12.5978 96.4 15.5 19.0 243 9.57 1.0 .04 1.0 .04 219.950 219.921 8.6594 8.6583 339.927 339.984 13.3830 13.3852 124 15.5 19.5 263 10.35 1.0 .04 1.0 .04 239.950 239.921 9.4468 9.4457 369.927 369.984 14.5641 14.5663 157 15.0 19.5 283 11.14 1.0 .04 1.0 .04 259.944 259.912 10.2340 10.2327 399.927 399.984 15.7452 15.7474 188 14.5 20.0 310 12.20 1.0 .04 1.0 .04 279.944 279.912 11.0214 11.0201 429.920 429.983 16.9260 16.9285
* For bearing sizes 5SF8 through 25SF40, shaft and shoulder should be undercut to eliminate ?llet. † Equal to minimum inner ring bore chamfer.
‡ Equal to minimum outer ring O.D. chamfer.
TIMKEN PRODUCTS CATALOG B429
•
SPHERICAL PLAIN BEARINGS
RADIAL BEARINGS TYPE SFH
Caption:
• The SFH spherical plain radial bearing is a unit assembly consisting of a solid spherical O.D. inner ring and a spherical
I.D. outer ring. The outer ring has a single fracture to permit assembly. Both inner and outer rings are phosphate treated and then coated with molybdenum disulphide (MoS2).
• The type SFH bearing is similar to type SF, but the inner ring bore diameter has been reduced and the width made greater to increase the spherical surface. This permits greater misalignment yet maintains full bearing contact.
• Bearings 12SFH24 through 22SFH40 are available with reinforced rubber seals. To order, add suf?x “TT” to bearing designation - Example: 22SFH40-TT.
• Bearings 25SFH44 through 55SFH96 are available with synthetic resin seals. To order, add suf?x “SS” to bearing designation - Example: 25SFH44-SS.
• Before ordering any bearing, check for availability.
DIMENSIONS
• Inch-metric conversions given are for the convenience of the user. The controlling dimensions are in inches.
• For tolerances of nominal dimensions, see Tables 2 and 2A on page B411. Dimensions listed are after coating with
MoS2 except outer ring O.D. and internal clearance are before coating and fracturing. The axial internal clearance is approximately three times the radial internal clearance.
• ? is the maximum tilting angle for sealed radial bearings. To utilize the maximum tilting angle for unsealed radial bearings, the suggested shaft shoulder diameter da, shown in the drawing on facing page must not be exceeded.
• Dimensions and locations of lubrication holes and grooves may be obtained from your Timken representative.
A
B
Radial Bearings Type SFH
B1
B1
d1
d1
D
d
D
d
B
B
Type SFH Type SFH TT, SFH SS
Type SFH Types SFH-TT, SFH-SS
DIMENSIONS - LOAD RATINGS
Bearing Bore Outside Diameter Inner Ring Outer ring Spherical Diameter Radial Clearance* Load Ratings Number d D Width Width d1 (unmounted) Radial Dynamic
B1 B Limit Radial Load Load
(Ref.) mm in. Rating Rating mm in. mm in. mm in. mm in. mm in. min. max. min. max. lbf. lbf.
12SFH24 31.750 1.2500 61.912 2.4375 35.31 1.390 28.58 1.125 54.74 2.155 0.13 0.23 .005 .009 75000 21400 15SFH28 38.100 1.5000 71.438 2.8125 40.13 1.580 33.32 1.312 63.88 2.515 0.13 0.23 .005 .009 102000 29200 17SFH32 44.450 1.7500 80.962 3.1875 46.23 1.820 38.10 1.500 73.02 2.875 0.13 0.23 .005 .009 133000 39300 20SFH36 50.800 2.0000 90.488 3.5625 52.58 2.070 42.85 1.687 82.17 3.235 0.15 0.25 .006 .010 169000 51000 22SFH40 57.150 2.2500 100.012 3.9375 58.88 2.318 47.62 1.875 91.19 3.590 0.15 0.25 .006 .010 208000 64000
25SFH44 63.500 2.5000 111.125 4.3750 64.64 2.545 52.37 2.062 100.33 3.950 0.15 0.25 .006 .010 252000 78400 27SFH48 69.850 2.7500 120.650 4.7500 70.87 2.790 57.15 2.250 109.52 4.312 0.15 0.25 .006 .010 300000 94600 30SFH52 76.200 3.0000 130.175 5.1250 76.76 3.022 61.90 2.437 118.74 4.675 0.18 0.28 .007 .011 353000 112000 32SFH56 82.550 3.2500 139.700 5.5000 82.93 3.265 66.68 2.625 128.02 5.040 0.18 0.28 .007 .011 410000 131000 35SFH60 88.900 3.5000 149.225 5.8750 90.42 3.560 71.42 2.812 136.91 5.390 0.18 0.28 .007 .011 467000 154000
37SFH64 95.250 3.7500 158.750 6.2500 94.95 3.738 76.20 3.000 146.05 5.750 0.18 0.28 .007 .011 533000 173000 40SFH72 101.600 4.0000 177.800 7.0000 107.32 4.225 85.72 3.375 164.46 6.475 0.18 0.28 .007 .011 673000 208000 45SFH80 114.300 4.5000 196.850 7.7500 119.13 4.690 95.25 3.750 182.63 7.190 0.18 0.28 .007 .011 833000 260000 55SFH96 139.700 5.5000 222.250 8.7500 125.73 4.950 104.78 4.125 207.16 8.156 0.18 0.28 .007 .011 1050000 336000
* Prior to fracturing outer ring.
Caption:
A
•
B430 TIMKEN PRODUCTS CATALOG
Spherical Plain Bearings
MOUNTING
• The housing bore dimensions given below are applicable to bearings mounted in steel.
• Due to fracturing, the outer ring may be slightly out-of-round. Roundness will be restored, however, when the bearing is mounted in a housing of suf?cient cross section.
• The preferred shaft tolerance is g6 as listed below per ANSI B4.1. To obtain a shaft interference ?t, refer to the m6 tolerance limits listed in the Shaft Diameter Tolerance table on page B410.
LOAD RATING
• The “dynamic load rating” is the maximum load suggested for extended life with periodic lubrication. It is based upon the radially projected area of the inner ring bore and an allowable stress level of 85 megapascals (approximately 12,300 psi).
• For intermittent loading and intermittent operation, the applied radial load should not exceed the dynamic load rating. For constant loading and continuous operation, the applied
radial load should not exceed 75 percent of the dynamic load rating. For dynamic or static thrust loading, use 25 percent of respective radial load rating values. For combined radial and thrust loading, consult your Timken representative.
• The “limit load rating” is the maximum static load that can be applied to a Timken spherical plain bearing. Shaft and housing stresses should be checked when the load approaches the limit load rating since the shaft or housing may then become the critical member. The ultimate, or static fracture, rating of the bearing is at least 1.5 times the limit load rating.
• Load ratings are given in pounds force:
1lbf = 0.454 kgf = 4.448N.
A
B
MOUNTING
?
? '
r b
d a
d a
r a H
S
Maximum tilt
Maximum tilt
Mounting detail
for sealed bearing
for bearing without seals
MOUNTING DIMENSIONS
Weight Tilting Angle Shaft Shaft Housing Shaft Diameter Housing Bore
Shoulder Fillet Fillet S H
Diameter Radius* Radius
? ?' da ra† rb‡
(Approx.) (Max.) (Max.) mm in. mm in.
lbs. deg. deg. mm in. mm in. mm in. max. min. max. min. max. min. min. max.
1.00 8.5 16.5 41.9 1.64 1.0 .040 0.8 .032 31.740 31.725 1.2496 1.2490 61.874 61.904 2.4360 2.4372
1.60 7.0 15.5 49.8 1.95 1.0 .040 0.8 .032 38.090 38.075 1.4996 1.4990 71.399 71.429 2.8110 2.8122
2.50 7.5 16.0 56.6 2.22 1.5 .060 0.8 .032 44.440 44.425 1.7496 1.7490 80.914 80.950 3.1856 3.1870
3.70 8.0 16.0 63.2 2.48 1.5 .060 0.8 .032 50.790 50.772 1.9996 1.9989 90.439 90.475 3.5606 3.5620
4.40 8.5 16.5 69.6 2.74 1.5 .060 0.8 .032 57.140 57.122 2.2496 2.2489 99.964 100.000 3.9356 3.9370
6.50 8.5 14.0 76.7 3.02 2.0 .080 0.8 .032 63.490 63.472 2.4996 2.4989 111.077 111.113 4.3731 4.3745 8.00 8.5 14.0 83.6 3.28 2.0 .080 0.8 .032 69.840 69.822 2.7496 2.7489 120.594 120.635 4.7478 4.7494 9.60 8.5 14.0 90.7 3.56 2.0 .080 0.8 .032 76.190 76.172 2.9996 2.9989 130.119 130.160 5.1228 5.1244
11.7 8.5 14.0 97.5 3.83 2.0 .080 0.8 .032 82.537 82.514 3.2495 3.2486 139.544 139.685 5.4978 5.4994
15.0 9.5 15.0 103 4.04 2.0 .080 0.8 .032 88.887 88.864 3.4995 3.4986 149.169 149.210 5.8728 5.8744
A
19.5 9.0 14.5 111 4.36 2.0 .080 0.8 .032 95.237 95.214 3.7495 3.7486 158.694 158.735 6.2478 6.2494
22.5 9.0 14.5 125 4.90 2.0 .080 1.1 .044 101.587 101.564 3.9995 3.9986 177.744 177.785 6.9978 6.9994
30.0 9.0 14.5 138 5.44 2.0 .080 1.1 .044 114.287 114.264 4.4995 4.4986 196.784 196.830 7.7474 7.7492
45.0 6.5 12.0 165 6.48 2.0 .080 1.1 .044 139.685 139.660 5.4994 5.4984 222.184 222.230 8.7474 8.7492
* For bearing sizes 5SF8 through 25SF40, shaft and shoulder should be undercut to eliminate ?llet. † Equal to minimum inner ring bore chamfer.
‡ Equal to minimum outer ring O.D. chamfer.
Caption:
TIMKEN PRODUCTS CATALOG B431
•
Caption:
SPHERICAL PLAIN BEARINGS
ANGULAR CONTACT BEARINGS TYPE SBT
• Separable assembly consisting of an inner and outer ring with hemispherically shaped surfaces that mate with each other.
• Both inner and outer rings are phosphate-treated and coated with molybdenum disulphide (MoS2).
• If a Timken ring is assembled with a ring of another make, consult your Timken representative.
• To order inner and outer rings separately, specify by adding suf?x “-OR” for outer ring or “-IR” for inner ring.
• Metric-inch conversions are provided for the convenience of the user. The controlling dimensions are in inches.
• See Table 2 and 3 for tolerances. Dimensions listed are after the bearing has been coated with molybdenum disulphide.
• ? is the maximum tilting angle through the shaft. A stub shaft can be used to obtain a larger angle.
• Dimensions and locations of lubrication holes and grooves may be obtained from your Timken representative.
d1
d
A
B
W
B1
B
K
D
DIMENSIONS - LOAD RATINGS
Bearing Bore Outside Diameter Inner Ring Outer ring Spherical Diameter Radial Clearance* Load Ratings Number d D Width Width d1 (unmounted) Radial Dynamic
B1 B Limit Radial Load Load
(Ref.) mm in. Rating Rating mm in. mm in. mm in. mm in. mm in. min. max. min. max. lbf. lbf.
A
5SBT80 0.5000 12.700 0.8750 22.225 0.270 6.86 0.190 4.83 0.300 7.62 0.094 2.39 0.719 18.26 4600 1860
6SBT10 0.6250 15.875 1.0625 26.988 0.340 8.64 0.250 6.35 0.370 9.40 0.109 2.77 0.899 22.83 7600 3080
7SBT12 0.7500 19.050 1.2500 31.750 0.410 10.41 0.310 7.87 0.440 11.18 0.125 3.18 1.080 27.43 11100 4500
8SBT14 0.8750 22.225 1.4375 36.512 0.480 12.19 0.380 9.65 0.520 13.21 0.172 4.37 1.258 31.95 15400 6210
10SBT16 1.0000 25.400 1.6250 41.275 0.550 13.97 0.440 11.18 0.600 15.24 0.203 5.16 1.437 36.50 19400 7860 12SBT20 1.2500 31.750 2.0000 50.800 0.700 17.78 0.550 13.97 0.740 18.80 0.234 5.94 1.795 45.59 31000 12500 13SBT22 1.3750 34.925 2.1875 55.562 0.770 19.56 0.600 15.24 0.840 21.34 0.281 7.14 1.937 49.20 37000 15100 15SBT24 1.5000 38.100 2.4375 61.912 0.840 21.34 0.660 16.76 0.910 23.11 0.312 7.92 2.155 54.74 44500 18300
17SBT28 1.7500 44.450 2.8125 71.438 0.980 24.89 0.790 20.07 1.070 27.18 0.328 8.33 2.515 63.88 60000 24400 20SBT32 2.0000 50.800 3.1875 80.962 1.130 28.70 0.920 23.37 1.230 31.24 0.375 9.52 2.875 73.02 79000 32300 22SBT36 2.2500 57.150 3.5625 90.488 1.270 32.26 1.050 26.67 1.390 35.31 0.453 11.51 3.235 82.17 100000 40800 25SBT40 2.5000 63.500 3.9375 100.012 1.420 36.07 1.180 29.97 1.540 39.12 0.500 12.70 3.590 91.19 126000 51500
27SBT44 2.7500 69.850 4.3750 111.125 1.560 39.62 1.275 32.38 1.700 43.18 0.515 13.08 3.950 100.33 154000 62150 30SBT48 3.0000 76.200 4.7500 120.650 1.710 43.43 1.405 35.69 1.860 47.24 0.578 14.68 4.312 109.52 186000 75000 32SBT52 3.2500 82.550 5.1250 130.175 1.860 47.24 1.545 39.24 2.030 51.56 0.656 16.66 4.675 118.74 218000 87500 35SBT56 3.5000 88.900 5.5000 139.700 2.000 50.80 1.675 42.54 2.180 55.37 0.703 17.86 5.040 128.02 257000 102400
37SBT60 3.7500 95.250 5.8750 149.225 2.150 54.61 1.805 45.85 2.340 59.44 0.765 19.43 5.390 136.91 295000 118500 40SBT64 4.0000 101.600 6.2500 158.750 2.300 58.42 1.935 49.15 2.500 63.50 0.781 19.84 5.750 146.05 336000 135000 45SBT72 4.5000 114.300 7.0000 177.800 2.590 65.79 2.195 55.75 2.800 71.12 0.875 22.22 6.475 164.46 432000 173500 50SBT80 5.0000 127.000 7.7500 196.850 2.880 73.15 2.455 62.36 3.130 79.50 1.000 25.40 7.190 182.63 524000 211000 60SBT96 6.0000 152.400 8.7500 222.250 3.100 78.74 2.615 66.42 3.375 85.72 1.370 34.80 8.156 207.16 585000 235000
Caption:
•
B432 TIMKEN PRODUCTS CATALOG
Spherical Plain Bearings
MOUNTING
• Housing bore dimensions listed are appropriate for bearings mounted in steel.
• Suggested diameters of shoulder supports should be used to assure proper function of the bearing.
• Preferred shaft and housing bore dimensions are listed below per ANSI B4.1.
• Refer to the m6 tolerance limits listed in the Shaft Diameter Tolerance table on page B410 for shaft interference ?t.
• Bearings are to be mounted with suf?cient axial preload to ensure contact of the spherical surfaces under all load conditions.
?
A
B
A
MOUNTING
MOUNTING DIMENSIONS
Weight Tilting Shaft Shaft Housing Housing Shaft Diameter Housing Bore
Angle Shoulder Fillet Shoulder Filet S H
Diameter Radius Diameter Radius da ra† db rb‡
(Approx.) (Max.) (Max.) (Max.) mm in. mm in.
kg lbs. deg. mm in. mm in. mm in. mm in. max. min. max. min. min. max. min. max.
0.013 0.029 7 0.67 17.0 0.020 0.5 0.57 14.5 0.020 0.5 0.4998 0.4994 12.695 12.685 0.8739 0.8747 22.197 22.217
0.025 0.056 6 0.84 21.3 0.030 0.8 0.70 17.8 0.030 0.8 0.6248 0.6244 15.870 15.860 1.0614 1.0622 26.960 26.980
0.038 0.083 6 1.02 25.9 0.040 1.0 0.84 21.3 0.040 1.0 0.7497 0.7492 19.042 19.029 1.2487 1.2497 31.717 31.742
0.050 0.110 5.5 1.23 31.2 0.080 2.0 0.97 24.6 0.080 2.0 0.8747 0.8742 22.217 22.204 1.4362 1.4372 36.479 36.504
0.458 1.010 6 2.36 59.9 0.100 2.5 1.95 49.5 0.100 2.5 1.7496 1.7490 44.440 44.425 2.8110 2.8122 71.399 71.429
0.671 1.480 5.5 2.75 69.8 0.140 3.6 2.22 56.4 0.140 3.6 1.9996 1.9989 50.790 50.772 3.1856 3.1870 80.914 80.950
0.948 2.090 5.5 3.06 77.7 0.140 3.6 2.50 63.5 0.140 3.6 2.2496 2.2489 57.140 57.122 3.5606 3.5620 90.439 90.475
1.129 2.490 5 3.37 85.6 0.140 3.6 2.75 69.9 0.140 3.6 2.4996 2.4989 63.490 63.472 3.9356 3.9370 99.964 100.000
d a
d b
H
Mounting detail
S
r a
r b
Maximum tilt for bearing
0.085 0.188 6 1.40 35.6 0.080 2.0 1.12 28.4 0.080 2.0 0.9997 0.9992 25.392 25.379 1.6237 1.6247 41.242 41.267
0.159 0.351 6 1.71 43.4 0.080 2.0 1.39 35.3 0.080 2.0 1.2496 1.2490 31.740 31.725 1.9985 1.9997 50.762 50.792
0.213 0.470 4 1.89 48.0 0.100 2.5 1.48 37.6 0.100 2.5 1.3746 1.3740 34.915 34.900 2.1860 2.1872 55.524 55.554
0.300 0.662 5.5 2.05 52.1 0.100 2.5 1.66 42.2 0.100 2.5 1.4996 1.4990 38.090 38.075 2.4360 2.4372 61.874 61.904
Caption:
1.751 3.860 5 3.71 94.2 0.180 4.6 3.03 77.0 0.180 4.6 2.7496 2.7489 69.840 69.822 4.3731 4.3745 111.077 111.113
2.277 5.020 5 4.07 103.0 0.180 4.6 3.30 83.8 0.180 4.6 2.9996 2.9989 76.190 76.172 4.7478 4.7494 120.594 120.635
2.885 6.360 5 4.42 112.0 0.180 4.6 3.58 90.9 0.180 4.6 3.2495 3.2486 82.537 82.514 5.1228 5.1244 130.119 130.160
3.570 7.870 5 4.77 121.0 0.180 4.6 3.85 97.8 0.180 4.6 3.4995 3.4986 88.887 88.864 5.4978 5.4994 139.644 139.685
4.350 9.590 4.5 5.11 130.0 0.180 4.6 4.10 104.0 0.180 4.6 3.7495 3.7486 95.237 95.214 5.8728 5.8744 149.169 149.210 5.262 11.600 4.5 5.43 138.0 0.180 4.6 4.37 111.0 0.180 4.6 3.9995 3.9986 101.587 101.564 6.2478 6.2494 158.694 158.735 7.756 17.100 4.5 6.14 156.0 0.180 4.6 4.90 125.0 0.180 4.6 4.4995 4.4986 114.287 114.264 6.9978 6.9994 177.744 177.785
11.068 24.400 4.5 6.83 174.0 0.180 4.6 5.47 139.0 0.180 4.6 4.9994 4.9984 126.984 126.959 7.7474 7.7492 196.784 196.830
17.373 38.300 4.5 7.75 197.0 0.180 4.6 6.50 165.0 0.180 4.6 5.9994 5.9984 152.385 152.360 8.7474 8.7492 222.184 222.230
† Equal to minimum inner ring bore chamfer.
‡ Equal to minimum outer ring O.D. chamfer.
TIMKEN PRODUCTS CATALOG B433
•
SPHERICAL PLAIN BEARINGS
Caption:
A
B
A
Caption:
•
B434 TIMKEN PRODUCTS CATALOG
Thrust Bearings
Thrust
THRUST BEARINGS
Overview: Timken thrust bearings are designed speci?cally to manage thrust loads and provide high-shock-load resistance in industrial and automotive applications. We manufacture seven basic designs of thrust bearings that include ball, crossed roller, cylindrical, machined tapered (TTHD, V-Flat, screwdown), stamped tapered, spherical and needle.
• Sizes: 35 mm - 2940 mm (1375 in. - 115.75 in.).
• Markets: Aggregate, Machine Tool, Metals, Oil, Power Generation.
• Applications: Cone crushers, crane hooks, oil well swivels, extruders, pulverizer drives, rolling mills, machine tool spindles & tables, drilling rig hydraulic heads, gear boxes, pre-heater fans.
• Bene?ts: High performance and application ?exibility. Large range of product offering.
A
B
Caption:
Caption:
A
Caption:
TIMKEN PRODUCTS CATALOG B435
•
Caption:
B
Ball and Roller Thrust Bearings
From the three-digit “Series” number, it is known this is an inch size bearing. “50” is read as “5.0” and represents approximate or actual bore.
The series number (always three numerals) represents a speci?c size cage assembly.
50 TVB 190
A A XXX
TVB thrust ball bearings
TVL angular contact thrust ball bearings DTVL angular contact thrust ball bearings –
upper and lower complement of balls TSR thrust spherical roller bearings TTVF thrust tapered roller bearings
TTVS thrust tapered roller bearings –
with aligning washer
TTSV, TTSX thrust tapered roller bearings –
full complement
TP thrust cylindrical roller bearings TPS thrust cylindrical roller bearings –
with aligning washer
TTHD thrust tapered roller bearings
modi?cation
to inner ring
modi?cation
to outer ring
descriptive of
modi?cation code
Caption:
•
B436 TIMKEN PRODUCTS CATALOG
Thrust Bearings
Thrust
B
Ball and Roller Thrust Bearings
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B438
Ball.and.Roller.Thrust.Bearing.Types . . . . . . . . . . . . . . . . . . . B438
DIMENSIONS – LOAD RATINGS
Ball.Thrust.Bearing.Type.TVB . . . . . . . . . . . . . . . . . . . . . . . . . B442
Angular.Contact.Ball.Thrust.Bearing.Type.TVL. . . . . . . . . . . B443
Angular.Contact.Ball.Thrust.Bearing.Type.DTVL. . . . . . . . . . B444
Spherical.Roller.Thrust.Bearing.Type.TSR . . . . . . . . . . . . . . . B445
Cylindrical.Roller.Thrust.Bearing.Type.TP. . . . . . . . . . . . . . . . B447
Cylindrical.Roller.Thrust.Bearing.Type.TPS . . . . . . . . . . . . . . B449
Crossed.Roller.Thrust.Bearing.Type.XR.and.JXR. . . . . . . . . . B451
Tapered.Roller.Thrust.Bearing.Type.TTHD. . . . . . . . . . . . . . . B452
Tapered.Roller.Thrust.Bearing.Type.TTVF . . . . . . . . . . . . . . . B457
Tapered.Roller.Thrust.Bearing.Type.TTVS. . . . . . . . . . . . . . . B458
Tapered.Roller.Thrust.Bearing.Type.TTSX. . . . . . . . . . . . . . . B459
Tapered.Roller.Thrust.Bearing.Type.TTSV. . . . . . . . . . . . . . . B460
Stamped.Roller.Thrust.Bearing.Type.TTSP . . . . . . . . . . . . . . B461
Stamped.Tapered.Roller.Thrust.Bearing.Type.TTC,.TTCS. . . B463
TIMKEN PRODUCTS CATALOG B437
Page
Caption:
•
ROLLER BEARINGS
INTRODUCTION
Six basic designs of ball and roller thrust bearings are available: ball, cross roller, cylindrical, machine tapered (TTHD, V-Flat, Screwdown), stamped tapered and spherical tapered roller. Dimensional data for all styles are presented in order by bore size.
Engineering data such as tolerances, shaft and housing ?ts, and life and load rating calculations are found in the engineering section of this catalog.
Caption:
A
B
A
BEARING TYPES BALL THRUST BEARINGS
Ball thrust bearings provide optimum performance in high-speed installations, particularly where loads are generally lighter. Two types including axial (TVB), and angular contact (TVL) are available. The DTVL Type is offered with both an upper and lower complement of angular contact balls and three race elements. The standard tolerances for ball thrust bearings (both types) are equivalent to ABEC 1 where applicable. Higher precision tolerances are available. Consult your Timken representative for information on such installations.
TVB
TVB Types are separable, consisting of two hardened and ground steel washers. Precision ground and lapped balls run in a grooved raceway separated by a bronze cage. Other materials may be speci?ed for the cage, depending on the application.
Most TVB bearings include washers of the same bore and outside diameter. Housings should be designed to clear the O.D. of rotating races, with shafts stepped to clear the bore of stationary washers. Provides axial rigidity, but are not suggested if radial load is expected. The TVB is exceptionally easy to mount with the rotating washer usually shaft mounted. The stationary washer should be housed with an outside diameter clearance that allows the bearing to assume a normal operating position.
TVL
TVL Types provide exceptionally low friction, are cool running and have quiet operation when operated at high speeds. They are also less sensitive to misalignment. Consult your Timken representative for assistance in determining limits of such loading for speci?c applications.
Although ball thrust bearings have been designed exclusively for thrust loads, the TVL bearing will accommodate some radial loading. Consult your Timken representative for assistance in determining the limits of such loading for speci?c applications.
Hardened and ground steel races of TVL bearings enclose a complement of precision ground and lapped steel balls, separated by a bronze cage. Other material may be speci?ed as required.
Not strictly an annular ball bearing, the larger ring is identi?ed as the outer ring; the smaller as the inner. Inner ring is usually the rotating element and is shaft mounted. Outer ring is normally stationary and should be mounted with an outside diameter clearance that allows the bearing to assume a normal operating position. If combined loads are expected, the outer ring must be radially located in the housing.
TVL bearings should always be operated under thrust loading. If a constant thrust load is not normally present, it should be imposed by springs or other devices.
DTVL
The DTVL has an upper and lower complement of angular contact balls and three race elements. It is capable of carrying thrust in one direction, comparable to the TVL Series and lighter thrust in the opposite direction.
TVB
TVB
TVB
TVB
TVL
TVL
TVL
TVL
DTVL
Caption:
DTVL
DTVL
DTVL
TSR
•
B438 TIMKEN PRODUCTS CATALOG
TSR
Thrust Bearings
Thrust
DTVL
SPHERICAL ROLLER THRUST BEARINGS
TSR
A combination radial and thrust bearing designed to operate even if shaft and housing are, or become, misaligned under load. A favored bearing when conditions include heavy loads, dif?culties in establishing or maintaining housing alignment or when shaft de?ection can be expected.
Shaft de?ections and housing distortions caused by shock or heavy loads (which lead to misalignment) are compensated for by the internal self-alignment of the bearing elements during operation. Corner loading of rollers, a condition that limits service life on other types of bearings, cannot develop in spherical roller thrust bearings.
The TSR achieves high thrust capacity and allows axial misalignment between the inner ring and the outer ring of up to ±2.5?. Spherically contoured rollers, arranged in a steep angular position, not only accept high axial loads, but also moderate radial loads. "E" styles, (EM-machined bronze cage, EJ- stamped steel cage) have increased capacity. Should extreme conditions of loading and/or speed under misalignment be anticipated, contact your Timken representative before ordering.
The inherent compensation for misalignment, provided by the spherical roller bearings, offers the designer the opportunity to use weldments for housing frames instead of complex castings. This eliminates high-cost machining operations. When castings are preferred, bore alignment is less critical if spherical roller bearings are speci?ed.
CYLINDRICAL ROLLER THRUST BEARINGS
Timken's cylindrical roller thrust bearings are designed to operate under heavy loads at moderate speeds. Standard versions can be operated at peripheral speeds (bearing O.D.) of up to 3000 feet per minute. Special design features are available for both the bearing and mounting permitting even higher rotational speeds for this type of bearing. Two types of cylindrical roller thrust bearings, TP and TPS, are available.
TP
Type TP bearings include two ?at hardened and ground steel washers with a cage retainer holding one or more controlled contour rollers in each pocket. If speci?cations call for two or more rollers per pocket, they are manufactured to different lengths. The longer rollers are placed in alternate positions in adjacent pockets. Overlapping roller paths prevent "grooving" of the races and prolong bearing life. Due to the simplicity of design, standard TP thrust bearings are among the most economical to buy and install.
Minor radial displacement of the races does not affect the operation of the TP bearing, resulting in manufacturing economies and simpli?ed installation.
Shaft and housing seats must be square to the axis of rotation to prevent initial misalignment problems.
TPS
The TPS design is similar to the TP style, except the bottom washer assembly is comprised of two races, with the contacting faces spherically ground. The TPS bearing is self-adjusting to initial misalignment. It is not suggested for installations where alignment may be continuously changing (dynamic misalignment).
TXR
The crossed roller bearing is ideal for machine tool applications such as vertical boring mills, vertical grinding machines and other similar applications. A crossed roller bearing is comprised of two sets of bearing races and rollers brought together at right angles to each other – with alternate rollers facing in opposite directions – and within a section height not much greater than that of a single bearing housing.
TSR
TSR
A
B
A
TSR-EJ
TSR-EM
TP
TP
TP
TPS
Caption:
Caption:
TPS
TPS
TXR
TTHD
TTHD
TIMKEN PRODUCTS CATALOG B439
•
ROLLER BEARINGS
TAPERED ROLLER THRUST BEARINGS
Timken true rolling tapered roller thrust bearings include rollers that have conical sections. These bearings have been engineered so that the rollers and raceways form a cone in which the vertex is on the center line of the bearing. This bearing geometry assures a true rolling motion. In addition, the large end of each tapered roller is spherically ground so that its curvature conforms with the concave face of the washer rib. Pressure between the rib and roller, under load, guides the rollers accurately. Timken manufactures ?ve types of tapered roller thrust bearings: standard (TTHD), V-Flat (TTVF) self-aligning V-Flat (TTVS), concave washer (TTSV), and convex washer (TTSX).
TTHD
The TTHD design has an identical pair of hardened and ground steel washers with tapered raceways. Both washers have the same bore and O.D., therefore housings should be designed to clear the O.D. of rotating washers and shafts stepped to clear the bore of stationary washers. Controlled contour tapered rollers are equally spaced by a cage. The TTHD bearing is well-suited for applications where extremely high thrust loads and heavy shock may be encountered as in crane hooks. For very low speed applications with unusually high loading, TTHD bearings can be supplied with a full complement of rollers. These bearings are identi?ed in the tables by suf?x 00278 following the bearing number. Applications for full-complement bearings should be reviewed by your Timken representative to ensure selection of the proper bearing.
TTVF, TTVS, TTSV, TTSX
V-Flat Tapered Roller thrust bearings (TTVF and TTVS) combine the outstanding features of tapered thrust and cylindrical roller bearings, offering the highest possible capacity of any thrust bearing of its size. The V-Flat design includes one ?at washer and one with a tapered raceway matching the rollers. The design was originally developed for screwdown applications in metal rolling mills where thrust loads exceeding one million pounds are common. The V-Flat bearings have exceptional dynamic capacity within a given envelope and provides static capacity. They have been highly successful in heavily loaded extruders, in cone crushers and other applications where a wide range of operating conditions are found. Most sizes utilize cages with hardened pins through the center of the rollers, allowing closer spacing of the rollers to maximize capacity.
Smaller sizes have brass cages, designed for unidirectional retention of rollers.
Both the pin type and brass cage are designed to permit a full ?ow of lubricant to all critical surfaces, providing cooler operation.
Self-aligning V-Flat bearings (TTVS) employ the same basic roller and raceway design, except the lower washer is in two pieces, with the contacting faces spherically ground permitting self-alignment under conditions of initial misalignment. TTVS bearings should not used if dynamic misalignment (changing under load) is expected.
• The contact surface of each roller of the V-Flat bearings has a controlled contour wherein the ends are slightly relieved. This optimizes stress distribution by avoiding concentration of stress in the raceways at the ends of the rollers.
• Conformity between roller end and the rib is controlled to enhance the ?ow of lubricant between these surfaces, allowing the development of a hydrodynamic oil ?lm between the end of the roller and the guiding surface of the rib.
• Full roller complement designs (TTSV and TTSX) do not have conventional bores, but are provided with center inserts for attachment purposes as well as for lifting.
• The TTSV and TTSX designs offer the highest capacity but at a somewhat reduced speed capability as compared with other V-Flat types.
• The TTSV and TTSX bearings encompass tapered rollers between two raceways. One raceway is ?at and the other raceway forms the surface of a cone. The conical raceway has a washer with a rib to resist the radial component of the thrust force caused by the inclined plane and to guide the rollers.
TP
TP
TP
Caption:
TPS
TPS
TPS
A
B
A
TTHD
TORRINGTON THRUST BEARING
S
TTHD
TTHD
TTHD
TORRINGTON THRUST BEARING
S
TTVF
TTVF
TTVF
TTVF
-
-
-
TTVS
TTVS
-
TTVS
TTVS
TTSV
One raceway is ?at while the
-
-
One raceway is ?at while the
-
This de-
. In addition, the ?at
TTSV
-
TTSV
Caption:
.
This de-
. In addition, the ?at
-
TTSX
TTSX
-
.
-
•
B440 TIMKEN PRODUCTS CATALOG
-
TTSX
Thrust Bearings
Thrust
• Lines extended from the TTSV and TTSX roller-to-raceway contact surfaces converge to form a cone. The vertex of this cone is common with the centerline of the bearing and the plane of the raceway surface of the ?at washer.
• The TTSV and TTSX design achieves true rolling motion between the tapered rollers and both raceways with no sliding or skidding at any point on the rolling surfaces. The ?at raceway permits radial displacement without affecting the operation of the bearing.
TTSP
The types TTSP and TTSPS (not shown) thrust bearings are made up of two tapered thrust races, rollers, cage and outside retainer which holds the components together during shipping and installation. The types TTSP and TTSPS thrust bearings are exployed extensively in the steering pivot positions of automotive and industrial applications.
TTC, TTCS
The types TTC, TTCS and TTCL (not shown) thrust bearings consist of two tapered thrust races, rollers and an outside retainer and are cageless. The outside retainer holds the assembly together for shipping and installation. Types TTC, TTCS and TTCL bearings are thrust bearings speci?cally designed for oscillating applications These types are identical with the exception of the retainer construction.
A
B
A
Caption:
Caption:
Caption:
TIMKEN PRODUCTS CATALOG B441
•
ROLLER BEARINGS
Caption:
D
BALL THRUST BEARINGS TYPE TVB
H
Caption:
d
• Designed for optimum performance in high speed installations.
• Provide axial rigidity, but are not suggested if radial loading is expected.
• Exceptionally easy to mount, with the rotating washer usually shaft-mounted.
DIMENSIONS – LOAD RATINGS
r
E
T
A
B
r
Shoulder Diameter
Load Rating
Bearing Bore O.D. Height Shaft Housing Fillet Radius(1) Wt. Static Load Dynamic Load Number
d
D
T
H E
r
Rating Rating (min.) (min.) (max.) (max.)
Coa Ct
mm
mm mm mm mm
mm
kg
kN kN
in.
in.
in.
in. in. in.
lbs. lbs. lbs.
50TVB190 127.000 184.150 41.275 170.7 140.5
2.4
3.4
583.0 169.0
5.0000 7.2500 1.6250
6.72
5.53
0.09
7.2 131000 38000
52TVB253 133.350 203.200 50.800 185.7 150.8
2.4
5.5
756.0 223.0
5.2500 8.0000 2.0000
7.31
5.94
0.09
12.2 170000 50200
55TVB245 139.700 209.550 47.625 192.1 157.2
2.4
5.1
770.0 231.0
5.5000 8.2500 1.8750
7.56
6.19
0.09
11.3 173000 52000
57TVB248 146.050 215.900 47.625 198.4 163.5
2.4
5.3
810.0 239.0
5.7500 8.5000 1.8750
7.81
6.44
0.09
11.7 182000 53800
60TVB252 152.400 222.250 47.625 204.8 169.9
2.4
5.6
832.0 238.0
6.0000 8.7500 1.8750
8.06
6.69
0.09
12.4 187000 53500
62TVB291 158.750 228.600 47.625 215.1 172.2
2.4
5.8
867.0 245.0
6.2500 9.0000 1.8750
8.47
6.78
0.09
12.8 195000 55100
65TVB293 165.100 241.300 57.150 224.6 181.8
3.2
7.7 1060.0 317.0
6.5000 9.5000 2.2500
8.84
7.16
0.12
17.0 238000 71300
67TVB296 171.450 247.650 57.150 229.4 189.7
3.2
7.9 1110.0 328.0
6.7500 9.7500 2.2500
9.03
7.47
0.12
17.5 251000 73800
70TVB298 177.800 254.000 57.150 235.7 196.1
3.2
8.2 1170.0 339.0
7.0000 10.0000 2.2500
9.28
7.72
0.12
18.1 263000 76300
75TVB343 190.500 266.700 57.150 250 207.2
3.2
9.1 1140.0 321.0
7.5000 10.5000 2.2500
9.84
8.16
0.12
20.0 255000 72300
75TVB344 190.500 276.225 69.850 258.8 208
3.2
12.7 1390.0 407.0
7.5000 10.8750 2.7500 10.19
8.19
0.12
27.9 313000 91400
80TVB346 203.200 279.400 57.150 262.7 219.9
3.2
8.8 1370.0 395.0
8.0000 11.0000 2.2500 10.34
8.66
0.12
19.3 309000 88900
80TVB347 203.200 295.275 76.200 273.1 222.2
6.4
15.6 1700.0 504.0
8.0000 11.6250 3.0000 10.75
8.75
0.25
34.5 382000 113000
85TVB391 215.900 292.100 57.150 275.4 232.6
3.2
10.1 1280.0 349.0
8.5000 11.5000 2.2500 10.84
9.16
0.12
22.2 289000 78400
90TVB393 228.600 304.800 57.150 288.1 245.3
3.2
9.7 1620.0 442.0
9.0000 12.0000 2.2500 11.34
9.66
0.12
21.3 365000 99400
95TVB431 241.300 317.500 57.150 300.8 258
3.2
11.1 1380.0 366.0
9.5000 12.5000 2.2500 11.84
10.16
0.12
24.4 311000 82400
100TVB433 254.000 342.900 57.150 324.6 272.3
6.4
13.4 1560.0 431.0
10.0000 13.5000 2.2500 12.78
10.72
0.25
29.5 351000 96800
105TVB471 266.700 355.600 57.150 337.3 285.0
6.4
13.9 1810.0 476.0
10.5000 14.0000 2.2500 13.28
11.22
0.25
30.7 407000 107000
110TVB472 279.400 368.300 57.150 350 297.7
6.4
14.5 1870.0 486.0
Caption:
11.0000 14.5000 2.2500 13.78
11.72
0.25
31.9 421000 109000
A
120TVB511 304.800 393.700 57.150 375.4 323.1
6.4
15.6 2000.0 507.0
12.0000 15.5000 2.2500 14.78
12.72
0.25
34.5 450000 114000
130TVB551 330.200 419.100 63.500 400.8 348.5
6.4
18
2470.0 627.0
13.0000 16.5000 2.5000 15.78
13.72
0.25
39.6 555000 141000
140TVB581 355.600 444.500 63.500 426.2 373.9
6.4
19.2 2620.0 649.0
14.0000 17.5000 2.5000 16.78
14.72
0.25
42.3 590000 146000
150TVB610 381.000 482.600 63.500 460.4 403.6
6.4
24.8 2620.0 649.0
15.0000 19.0000 2.5000 18.12
15.89
0.25
54.7 590000 146000
160TVB640 406.400 508.000 63.500 482.6 431.8
6.4
26.3 2780.0 677.0
16.0000 20.0000 2.5000 19.00
17.00
0.25
57.9 624000 152000
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
•
B442 TIMKEN PRODUCTS CATALOG
Type TVL
Thrust Bearings
Thrust
ANGULAR CONTACT BALL THRUST BEARINGS TYPE TVL
D1
Caption:
H
• Provides exceptionally low friction, cool running and quiet operation when run at high speeds.
• Although designed exclusively for thrust loads, will accommodate some radial loading.
d
r
T
A
B
r
d1
E
DIMENSIONS – LOAD RATINGS(2)
D
Washers
Shoulder Diam. Dowel Pin (one per Washer)
Load Rating
Bearing Bore O.D. Height Small Large Shaft Housing Pin
Hole Location
from Centerline
Fillet(1) Weight Static Dynamic
Number d D T Diameter Bore H E Diameter
Radius Load Load O.D. I.D. Small Large r Rating Rating D1 d1 Bore Bore
(Min.) (Max.) Washer Washer (Max.) Coa Ct
mm mm mm mm mm mm mm mm mm mm mm kg. kN kN in. in. in. in. in. in. in. in. in. in. in. lbs. lbs. lbs.
90TVL710 228.600 295.275 38.100 277.81 246.06 261.9 261.9 — — — 3.2 6.2 636.0 164.0
9.0000 11.6250 1.5000 10.938 9.688 10.31 10.31 — — — 0.12 13.6 143000 36900 120TVL700 304.800 406.400 57.150 368.30 342.90 355.6 355.6 9.52 165.1 190.5 3.2 18.5 1600.0 429.0
12.0000 16.0000 2.2500 14.500 13.500 14.00 14.00 0.375 6.50 7.50 0.12 40.8 359000 96400 150TVL701 381.000 520.700 84.125 482.60 419.10 450.8 450.8 12.70 206.4 244.5 4.8 50.2 2700.0 721.0
15.0000 20.5000 3.3120 19.000 16.500 17.75 17.75 0.500 8.12 9.62 0.19 110.7 606000 162000 170TVL500 431.800 635.000 88.900 565.15 488.95 533.4 533.4 12.70 235 298.4 7.9 89.6 4390.0 1130.0
17.0000 25.0000 3.5000 22.250 19.250 21.00 21.00 0.500 9.25 11.75 0.31 197.5 986000 254000 180TVL605 457.200 625.475 92.075 549.28 508 541.3 541.3 15.88 247.6 285.8 3.2 78.4 4790.0 1280.0
18.0000 24.6250 3.6250 21.625 20.000 21.31 21.31 0.625 9.75 11.25 0.12 172.9 1076000 288000 195TVL470 495.300 584.200 57.150 571.50 508 539.8 539.8 9.52 258.8 281 3.2 28.4 2600.0 596.0
19.5000 23.0000 2.2500 22.500 20.000 21.25 21.25 0.375 10.19 11.06 0.12 62.7 585000 134000
200TVL850 508.000 704.850 117.475 628.68 565.15 606.4 606.4 15.88 276.2 330.2 6.4 127.3 5160.0 1350.0
20.0000 27.7500 4.6250 24.750 22.250 23.88 23.88 0.625 10.88 13.00 0.25 280.7 1160000 303000 201TVL615 511.175 628.650 66.675 590.55 549.28 569.9 569.9 12.70 268.3 300 3.2 41.9 3320.0 787.0
20.1250 24.7500 2.6250 23.250 21.625 22.44 22.44 0.500 10.56 11.81 0.12 92.3 746000 177000 202TVL620 514.350 704.850 114.300 622.30 571.50 609.6 609.6 20.64 279.4 327 6.4 122.3 5910.0 1560.0
20.5000 27.750 4.5000 24.500 22.500 24.00 24.00 0.812 11.00 12.88 0.25 269.7 1330000 351000 227TVL302 577.850 774.700 117.475 704.85 622.30 676.3 676.3 20.64 311.2 365.1 6.4 149.8 6620.0 1690.0
22.7500 30.5000 4.6250 27.750 24.500 26.62 26.62 0.812 12.25 14.38 0.25 330.2 1490000 379000 233TVL303 593.725 790.575 117.475 720.72 650.88 692.2 692.2 22.22 320.7 369.9 6.4 150.7 6850.0 1730.0
23.3750 31.1250 4.6250 28.375 25.625 27.25 27.25 0.875 12.62 14.56 0.25 332.2 1540000 388000 238TVL304 606.425 847.725 133.350 739.78 688.98 727.1 727.1 22.22 327 396.9 6.4 212.6 8510.0 2200.0
23.8750 35.3950 5.2500 29.125 27.125 28.62 28.62 0.875 12.88 15.62 0.25 468.7 1910000 494000 245TVL716 622.300 768.350 82.550 733.42 680.47 695.3 695.3 12.70 323.8 371.5 3.2 76.2 3830.0 863.0
24.5000 30.2500 3.2500 28.875 26.790 27.38 27.38 0.500 12.75 14.62 0.12 168.0 861000 194000 245TVL612 622.300 831.850 117.475 742.95 679.45 727.1 727.1 15.88 330.2 396.9 6.4 164.5 7070.0 1770.0
24.5000 32.7500 4.6250 29.250 26.750 28.62 28.62 0.625 13.00 15.62 0.25 362.7 1590000 397000 252TVL505 341.350 793.750 88.900 746.12 708.02 717.6 717.6 12.70 342.9 376.2 6.4 89.3 5430.0 1300.0
25.2500 31.2500 3.5000 29.375 27.875 28.25 28.25 0.500 13.50 14.81 0.25 197.0 1220000 293000 260TVL635 660.400 893.350 133.350 790.58 727.08 777.9 777.9 20.64 355.6 422.3 6.4 226.9 9520.0 2370.0
26.0000 35.2500 5.2500 31.125 28.625 30.62 30.62 0.812 14.00 16.62 0.25 500.4 2140000 533000
302TVL510 768.350 920.750 88.900 873.12 835.02 844.6 844.6 12.70 408 439.7 6.4 105.2 6360.0 1450.0
30.2500 36.2500 3.5000 34.375 32.875 33.25 33.25 0.500 16.06 17.31 0.25 231.9 1430000 325000 302TVL624 768.350 1006.475 139.700 901.7 838.2 887.4 887.4 22.22 409.6 476.2 6.4 271.1 10600.0 2540.0
30.2500 39.6250 5.5000 35.500 33.000 34.94 34.94 0.875 16.12 18.75 0.25 597.8 2370000 570000 303TVL706 771.525 898.525 63.500 860.42 809.62 835 835 12.70 403.2 431.8 6.4 58 3900.0 7788.0
30.3750 35.3750 2.5000 33.875 31.875 32.88 32.88 0.500 15.88 17.00 0.25 128.0 877000 175000 309TVL707 785.812 952.500 95.250 882.65 857.25 870 870 15.88 415.9 454 6.4 117.9 4230.0 1100.0
30.9375 37.5000 3.7500 34.750 33.750 34.25 34.25 0.625 16.38 17.88 0.25 260.0 952000 248000 310TVL625 787.400 1025.525 139.700 917.58 893.76 906.5 906.5 22.22 422.3 485.8 6.4 263.5 10900.0 2590.0
31.0000 40.3750 5.5000 36.125 35.188 35.69 35.69 0.875 16.62 19.12 0.25 581.0 2450000 582000 317TVL307 806.450 1025.525 127.000 933.45 873.12 914.4 914.4 22.22 427 476.2 6.4 240.6 10900.0 2590.0
31.7500 40.3750 5.0000 36.750 34.375 36.00 36.00 0.875 16.81 18.75 0.25 530.6 2450000 582000
402TVL717 1022.350 1181.100 88.900 1133.48 1069.98 1101.7 1101.7 19.05 530.2 571.5 6.4 147.8 8180.0 1710.0
40.2500 46.5000 3.5000 44.625 42.125 43.38 43.38 0.750 20.88 22.50 0.25 326.0 1840000 384000 410TVL718 1041.400 1260.475 127.000 1189.04 1112.84 1150.9 1150.9 19.05 544.5 606.4 6.4 308.8 14000.0 3060.0
41.0000 49.6250 5.0000 46.812 43.812 45.31 45.31 0.750 21.44 23.88 0.25 681.0 3140000 687000 420TVL721 1066.800 1285.875 127.000 1214.44 1138.24 1176.3 1176.3 22.22 560.4 616 6.4 315.2 14000.0 3060.0
42.0000 50.6250 5.0000 47.812 44.812 46.31 46.31 0.875 22.06 24.25 0.25 695.0 3140000 687000
530TVL719 1346.200 1517.650 104.775 1457.32 1406.52 1431.9 1431.9 22.22 695.3 733.4 6.4 229.99 9080.0 1830.0
53.0000 59.7500 4.1250 57.375 55.375 56.38 56.38 0.875 27.38 28.88 0.25 507.0 2040000 412000 540TVL720 1371.600 1619.250 139.700 1533.52 1457.32 1495.4 1495.4 22.22 714.4 781 6.4 480.3 18000.0 3630.0
54.0000 63.7500 5.5000 60.375 57.375 58.88 58.88 0.875 28.12 30.75 0.25 1059.0 4060000 815000
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
(2) See engineering section for application of Equivalent Thrust Load Factors: X = 0.76, Y = 1.00, (min) = 1.56. is Thrust Load ÷ Radial Load
Caption:
A
T
_ R
T _ R
TIMKEN PRODUCTS CATALOG B443
•
ROLLER BEARINGS
Ball Bearings Type DTVL
Caption:
ANGULAR CONTACT BALL THRUST BEARINGS TYPE DTVL
D1
D2
• Capable of carrying thrust in one direction, plus a lighter thrust in the opposite direction.
• Designed with an upper and lower complement of angular contact balls and three race elements.
d
r
r
d1
E
1
E
D
A
T1
B
T
DIMENSIONS – LOAD RATINGS(2)
Upper Race Lower Race
Load Rating
Bearing Bore
Upper Lower
Number Upper Lower O.D. Height O.D. Shoulder O.D. Shoulder Fillet(1) Weight Static Dynamic Static d d1 D T D1 D2 E E1 T1 Radius Load Load Load r Rating Rating Rating
(Max.) Coa Ct Coa
mm mm mm mm mm mm mm mm mm mm kg. kN kN kN in. in. in. in. in. in. in. in. in. in. lbs. lbs. lbs. lbs.
200DTVL722 508.000 508.000 742.95 171.45 679.45 616 587.38 558.8 127.000 6.4 177.3 5340 1560 2310
20.0000 20.0000 29.2500 6.7500 26.750 24.250 23.125 22.00 5.000 0.25 391.0 1200000 351000 519000
202DTVL723 514.350 511.175 704.85 158.75 622.30 609.60 590.55 569.9 114.3 6.4 133.3 5430 1480 3750
20.2500 20.1250 27.7500 6.2500 24.500 24.000 23.250 22.44 4.50 0.25 294.0 1220000 332000 844000
235DTVL724 596.900 590.550 838.2 184.15 774.70 711.20 676.28 647.7 139.7 6.4 246.2 7560 1970 3660
23.5000 23.2500 33.0000 7.2500 30.500 28.000 26.625 25.50 5.50 0.25 543.0 1700000 443000 822000
245DTVL725 622.300 619.125 815.975 158.75 730.25 717.60 698.50 677.9 114.3 6.4 157.4 6410 1640 4430
24.5000 24.3750 32.1250 6.2500 28.750 28.250 27.500 26.68 4.50 0.25 347.0 1440000 369000 995000
266DTVL726 676.275 673.100 914.4 193.675 876.30 787.40 787.4 743 142.88 6.4 296.6 8510 2480 6320
26.6250 26.5000 36.0000 7.6250 34.500 31.000 31.00 29.25 5.625 0.25 654.0 1910000 558000 1420000
305DTVL727 774.700 768.35 971.55 158.75 885.82 873.10 847.72 827.1 114.3 6.4 194.6 7780 1880 5390
30.5000 30.2500 38.2500 6.2500 34.875 34.380 33.38 32.56 4.50 0.25 429.0 1750000 423000 1210000
312DTVL728 793.750 787.400 1006.475 200.025 1000.12 895.40 901.7 863.6 139.7 6.4 325.2 10200 2480 7200
31.2500 31.0000 39.6250 7.8750 39.375 35.250 35.50 34.00 5.50 0.25 717.0 2300000 557000 1620000
405DTVL729 1028.700 1025.525 1231.9 158.75 1143 1130.30 1104.9 1084.3 114.3 6.4 254.4 10200 2240 6540
40.5000 40.3750 48.5000 6.2500 45.000 44.500 43.50 42.69 4.50 0.25 561.0 2280000 504000 1470000
412DTVL730 1047.750 1041.400 1260.475 200.025 1254.12 1149.40 1155.7 1117.6 139.7 6.4 417.2 12300 2780 8230
41.2500 41.0000 49.6250 7.8750 49.375 45.250 45.50 44.00 5.50 0.25 920.0 2760000 625000 1850000
541DTVL731 1374.775 1371.600 1597.025 247.65 1536.70 1481.10 1489.08 1447.8 168.28 6.4 654.4 17700 3580 11100
54.1250 54.0000 62.8750 9.7500 60.500 58.310 58.625 57.00 6.625 0.25 1443.0 3980000 804000 2500000
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
(2) See engineering section for application of Equivalent Thrust Load Factors: X = 0.76, Y = 1.00, (min) = 1.56. is Thrust Load ÷ Radial Load
T
_ R
T _ R
Caption:
A
•
B444 TIMKEN PRODUCTS CATALOG
Thrust Bearings
Thrust
Type TSR
SPHERICAL ROLLER THRUST BEARINGS
D1
S
H
Caption:
d
r
T2
T1
T3
A
B
T
r
d1
D
TYPE TSR
• Design achieves a high thrust capacity with low friction and continuous roller alignment.
• Spherically contoured rollers, arranged in steep angular position, not only accommodates high thrust loads, but supports moderate radial loads as well.
• Low friction of the bearing results from a combination of bearing geometry and manufacturing technology.
TYPE TSR-EM
• Utilize bronze retainers and enhanced internal geometry allowing for higher dynamic load ratings and improved lubrication characteristics.
• Utilizes spherically contoured rollers arranged in a steep angular con?guration to accommodate high thrust load alone or in combination with moderate radial loads.
• Possesses inherent dynamic misalignment capabilities.
DIMENSIONS – LOAD RATINGS
Shoulder Diameter Inner Ring
Load Rating
Bearing Bore O.D. Height O.D. Assembly Pilot Outer Fillet (1) Wt. Static Dynamic Approx. Number d D T d1 H D1 Height Height Ring S Radius Load Load Limiting k(2)
Housing Shaft T1 T2 Height r Rating Rating Speed (Min.) (Max.) T3 (Max.) Coa Ct (for Oil
Bath Only)
mm mm mm mm mm mm mm mm mm mm mm kg. kN kN RPM in. in. in. in. in. in. in. in. in. in. in. lbs. lbs. lbs.
29422 110 230 73 162 165 220 69 26 35 69 2.5 33.4 1150 800 1500 30
4.3307 9.0551 2.8740 6.378 6.496 8.661 2.717 1.024 1.378 2.717 0.10 33.4 260000 176000
29424 120 250 78 174 180 236 74 29 37 74 3.0 18.5 1180 965 1350 40
4.7244 9.8425 3.0709 6.850 7.087 9.291 2.913 1.142 1.476 2.933 0.12 40.7 256000 216000
29326 130 225 58 171 177 215 55 19 29 75 2.0 9.8 880 600 1700 22
5.1181 8.8583 2.2835 6.744 6.963 8.465 2.165 0.748 1.130 2.972 0.08 21.6 197000 132000
29426 130 270 85 187 195 255 81 31 42 81 3.0 23.9 1730 1120 1250 60
5.1181 10.6299 3.3464 7.375 7.677 10.039 3.189 1.22 1.669 3.189 0.12 52.6 388000 253000
29330 150 250 60 194 195 240 57 20 29 87 2.0 12.5 1140 670 1550 30
5.9055 9.8425 2.3622 7.638 7.677 9.449 2.244 0.787 1.142 3.425 0.08 27.5 255000 150000
29430 150 300 90 213 220 285 86 32 44 92 3.0 29.3 1930 1220 1100 80
5.9055 11.8110 3.5433 8.405 8.661 11.220 3.386 1.260 1.732 3.622 0.12 64.5 440000 275000
29334 170 280 67 216 220 270 64 23 32 96 2.5 16.5 1500 880 1350 50
6.6929 11.0236 2.6378 8.504 8.661 10.630 2.520 0.906 1.280 3.780 0.10 36.3 340000 196000
29434 170 340 103 243 245 324 99 37 50 104 4.0 42.4 2650 1630 950 140
6.6929 13.3858 4.0551 9.567 9.646 12.756 3.898 1.457 1.968 4.094 0.16 93.5 600000 365000
29338EJ 190 320 78 246 250 308 74 27 38 110 3.0 25.6 2442 1481 1150 80
7.4803 12.5984 3.0709 9.685 9.843 12.126 2.913 1.063 1.496 4.331 0.12 56.5 549000 333000
29438EJ 190 380 115 271 275 360 111 41 55 117 4.0 60.3 4168 2482 850 210
7.4803 14.9606 4.5276 10.669 10.827 14.173 4.370 1.614 2.185 4.606 0.16 133.0 937000 558000
29340 200 340 85 264 265 325 81 29 40 114 3.0 29 2157 1236 950 100
7.8740 13.3858 3.3465 10.3937 10.4331 12.7953 3.4252 1.1417 1.5748 4.4882 0.12 63 485000 278000
29440 200 400 122 286 290 380 117 43 59 122 4.0 69.8 3625 2135 800 260
7.8740 15.7480 4.8031 11.254 11.417 14.961 4.606 1.693 2.323 4.803 0.16 154.0 815000 480000
29344 220 360 85 280 285 345 81 29 41 125 3.0 33.9 2500 1340 1000 120
8.6614 14.1732 3.3464 11.024 11.220 13.583 3.189 1.142 1.614 4.921 0.12 74.8 550000 300000
29444 220 420 122 307 310 400 117 43 59 133 5.1 73.9 3800 2200 750 300
8.6614 16.5354 4.8031 12.106 12.205 15.748 4.606 1.693 2.323 5.236 0.20 163.0 865000 500000
29348 240 380 85 300 300 365 81 29 41 135 3.0 41.9 2650 1400 950 140
9.4488 14.9606 3.3464 11.811 11.811 14.370 3.189 1.142 1.614 5.315 0.12 92.4 600000 315000
29448EM 240 440 122 315 322 385 87 46 61 142 6.1 78 4884 2736 750 350
9.4488 17.3228 4.8031 12.4016 12.6772 15.1575 3.4252 1.8110 2.4016 5.5906 0.24 171 1098000 615000
Caption:
A
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
(2) Centrifugal force constant. See engineering section for calculations using this factor.
TIMKEN PRODUCTS CATALOG B445
•
Caption:
ROLLER BEARINGS
SPHERICAL ROLLER THRUST BEARINGS
TYPE TSR, TSR-EM – continued
Type TSR
D1
S
Caption:
H
d
r
T2
T
T1 T3
A
B
A
r
d1
D
DIMENSIONS – LOAD RATINGS - continued
29352 260 420 95 329 330 405 91 32 45 148 4.0 51.2 3350 1800 850 230
10.2362 16.5354 3.7402 12.953 12.992 15.945 3.583 1.260 1.791 5.827 0.16 113.0 750000 400000
29452 260 480 132 357 360 460 127 48 64 154 5.1 103 4900 1800 650 500
10.2362 18.8976 5.1968 14.055 14.173 18.110 5.000 1.890 2.520 6.063 0.20 227.0 1120000 620000
29360 300 480 109 379 380 460 105 37 50 168 4.0 76.6 4150 2160 700 350
11.8110 18.8976 4.2913 14.921 14.961 18.110 4.134 1.457 1.988 6.614 0.16 169.0 930000 490000
29460 300 540 145 402 410 515 140 52 70 175 5.1 136 6400 3450 550 780
11.8110 21.2598 5.7086 15.827 16.142 20.276 5.512 2.047 2.776 6.890 0.20 301.0 1430000 3450
29364 320 500 109 399 400 482 105 37 53 180 4.0 79.8 4300 2240 650 380
12.5984 19.6850 4.2913 15.709 15.748 18.976 4.134 1.457 2.087 7.087 0.16 176.0 980000 500000
29468 340 620 170 462 465 590 164 61 82 201 6.1 220 8500 4500 450 1350
13.3858 24.4094 6.6929 18.189 18.307 23.228 6.457 2.402 3.248 7.913 0.24 486.0 1900000 1020000
29372 360 560 122 448 450 540 117 41 59 202 4.0 113 5600 2800 550 640
14.1732 22.0472 4.8031 17.638 17.717 21.260 4.606 1.614 2.343 7.953 0.16 249.0 1250000 620000
29476 380 670 175 504 510 640 168 63 85 220 6.1 261 9000 4750 410 1700
14.9606 26.3780 6.8898 19.842 20.079 25.197 6.614 2.480 3.331 8.740 0.24 575.0 2040000 1060000
29576 380 820 265 570 578 780 226 100 128 241 9.1 824 17300 9500 280 5550
14.9606 32.2835 10.4330 22.441 22.756 30.709 10.078 3.927 5.062 9.488 0.36 1816.0 3900000 2120000
29380 400 620 132 494 500 596 127 44 64 225 5.1 165 7100 3450 500 970
15.748 24.4094 5.1968 19.449 19.685 23.465 5.000 1.732 2.520 8.858 0.20 363.0 1600000 780000
29284EM 420 580 95 479 500 542 70 41 50 228 5.1 70 5329 2624 630 300
16.5354 22.8346 3.7402 18.8583 19.685 21.339 2.7559 1.6142 1.9685 8.9764 0.20 154.0 1198000 590000
29388 440 680 145 548 563 657 140 49 69 246 5.1 180 7588 3647 480 1400
17.3228 26.7717 5.7089 21.5748 22.1654 25.866 5.5118 1.9291 2.7165 9.6850 0.20 397.0 1706000 820000
29488 440 780 206 588 595 745 199 74 99 257 7.1 411 13200 6700 320 3400
17.3228 30.7087 8.1102 23.150 23.425 29.331 7.835 2.913 3.917 10.118 0.28 906.0 2900000 1500000
29392 460 710 150 566 575 685 144 51 72 257 5.1 220 9300 4400 400 1700
18.1102 27.9528 5.9055 22.293 22.638 26.969 5.669 2.008 2.857 10.118 0.20 486.0 2100000 1000000
29496EM 480 850 224 626 658 770 159 93 110 279 9.7 550 22458 11342 290 4700
18.8976 33.4646 8.8189 24.6457 25.9055 30.315 6.2598 3.6614 4.3307 10.9843 0.38 1212.0 5049000 2550000
294/500 500 870 224 661 670 830 216 81 107 290 7.1 560 16000 8000 270 4800
19.6850 34.2520 8.8189 26.024 26.378 32.677 8.504 3.189 4.213 11.417 0.28 1235.0 3600000 1800000
293/530 530 800 160 648 650 772 154 54 76 295 6.1 288 11000 5100 350 2500
20.8661 31.4961 6.2992 25.512 25.591 30.394 6.063 2.126 2.992 11.614 0.24 634.0 2450000 1140000
293/600 600 900 180 727 730 868 173 61 87 333 5.1 635 16770 7619 320 4200
23.6220 35.4331 7.0866 28.6220 28.7402 34.173 6.8110 2.4016 3.4252 13.1102 0.20 1400.0 3770000 1713000
294/630 630 1090 280 831 850 1044 271 101 133 365 9.1 1170 23000 11400 250 12200
24.8031 42.9134 11.0236 32.707 33.465 41.102 10.669 3.976 5.236 14.393 0.36 2580.0 5200000 2550000
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
(2) Centrifugal force constant. See engineering section for calculations using this factor.
Shoulder Diameter Inner Ring
Load Rating
Bearing Bore O.D. Height O.D. Assembly Pilot Outer Fillet (1) Wt. Static Dynamic Approx. Number d D T d1 H D1 Height Height Ring S Radius Load Load Limiting k(2)
Housing Shaft T1 T2 Height r Rating Rating Speed (Min.) (Max.) T3 (Max.) Coa Ct (for Oil
Bath Only)
mm mm mm mm mm mm mm mm mm mm mm kg. kN kN RPM in. in. in. in. in. in. in. in. in. in. in. lbs. lbs. lbs.
Caption:
•
B446 TIMKEN PRODUCTS CATALOG
Thrust Bearings
Thrust
CYLINDRICAL ROLLER THRUST BEARINGS TYPE TP
D1
H
• Most economical to buy and install because of design simplicity.
• Minor radial displacement of the races does not affect its operation, resulting in manufacturing economies and simpli?ed installation.
Caption:
d
T1
T
r
d1
E
D
r
A
B
DIMENSIONS – LOAD RATINGS
Washers
Shoulder Diameter
Load Rating
Bearing Bore O.D. Height Thickness Small Large Shaft Housing Fillet(1) Wt. Static Dynamic Number d D T T1 Diameter Bore H E Radius Load Load
O.D. I.D.
r
Rating Rating
D1 d1 (Min.) (Max.) (Max.) Coa Ct
mm mm mm mm mm mm mm mm mm kg kN kN in. in. in. in. in. in. in. in. in. lbs. lbs. lbs.
20TP103 50.800 152.400 34.925 9.52 150.81 52.39 141.3 61.9 1.6 3.7 814 331
2.0000 6.0000 1.3750 0.375 5.938 2.062 5.56 2.44 0.06 8.1 183000 74500
20TP104 50.800 177.800 34.925 9.52 176.21 52.39 163.5 65.1 1.6 5.1 1010 398
2.0000 7.0000 1.3750 0.375 6.938 2.062 6.44 2.56 0.06 11.3 227000 89500
30TP106 76.200 152.400 34.925 9.52 150.81 77.79 142.9 85.7 1.6 3.2 747 340
3.0000 6.0000 1.3750 0.375 5.938 3.062 5.62 3.38 0.06 7.0 168000 76500
30TP107 76.200 177.800 34.925 9.52 176.21 77.79 166.7 87.3 1.6 4.6 1040 414
3.0000 7.0000 1.3750 0.375 6.938 3.062 6.56 3.44 0.06 10.2 234000 93200
30TP108 76.200 203.200 34.925 9.52 201.61 77.79 188.9 90.5 1.6 6.3 1380 520
3.0000 8.0000 1.3750 0.375 7.938 3.062 7.44 3.56 0.06 13.9 311000 117000
30TP109 76.200 228.600 34.925 9.52 227.01 77.79 212.7 92.1 1.6 8.2 1800 636
3.0000 9.0000 1.3750 0.375 8.938 3.062 8.38 3.62 0.06 18.1 405000 143000
35TP113 88.900 132.558 25.400 7.14 130.97 90.49 123.8 97.6 1.6 1.4 381 180
3.5000 5.2188 1.0000 0.281 5.156 3.562 4.88 3.84 0.06 3.0 85600 40400
40TP114 101.600 177.800 44.450 12.7 176.21 103.19 168.3 111.1 1.6 5 1030 503
4.0000 7.0000 1.7500 0.500 6.938 4.062 6.62 4.38 0.06 11.0 231000 113000
40TP115 101.600 203.200 44.450 12.7 201.61 103.19 190.5 114.3 1.6 7.1 1370 589
4.0000 8.0000 1.7500 0.500 7.938 4.062 7.50 4.50 0.06 15.6 308000 132000
40TP116 101.600 228.600 44.450 12.7 227.01 103.19 214.3 115.9 1.6 9.5 1770 676
4.0000 9.0000 1.7500 0.500 8.938 4.062 8.44 4.56 0.06 21.0 397000 152000
40TP117 101.600 254 44.450 12.7 252.41 103.19 238.1 117.5 1.6 11.6 2220 896
4.0000 10.0000 1.7500 0.500 9.938 4.062 9.38 4.62 0.06 25.6 498000 202000
50TP119 127 203.200 44.450 12.7 201.61 128.59 190.5 139.7 1.6 5.9 1280 593
5.0000 8.0000 1.7500 0.500 7.938 5.062 7.50 5.50 0.06 13.1 288000 133000
50TP120 127 228.600 44.450 12.7 227.01 128.59 215.9 139.7 1.6 8.3 1710 716
5.0000 9.0000 1.7500 0.500 8.938 5.062 8.50 5.50 0.06 18.4 385000 161000
50TP121 127 254 50.800 14.29 252.41 128.59 239.7 141.3 3.2 12.4 2180 841
5.0000 10.0000 2.0000 0.562 9.938 5.062 9.44 5.56 0.12 27.4 491000 189000
50TP122 127 279.400 50.800 14.29 277.81 128.59 261.9 144.5 3.2 15.8 2760 996
5.0000 11.0000 2.0000 0.562 10.938 5.062 10.31 5.69 0.12 34.8 620000 224000
50TP123 127 304.800 50.800 14.29 303.21 128.59 288.9 146 3.2 19.4 3290 1170
5.0000 12.0000 2.0000 0.562 11.938 5.062 11.38 5.75 0.12 42.8 789000 262000
60TP124 152.400 228.600 50.800 14.29 227.01 153.99 217.5 163.5 3.2 7.6 1410 600
6.0000 9.0000 2.0000 0.562 8.938 6.062 8.56 6.44 0.12 16.8 317000 135000
60TP125 152.400 254 50.800 14.29 252.41 153.99 241.3 165.1 3.2 10.7 2000 845
6.0000 10.0000 2.0000 0.562 9.938 6.062 9.50 6.50 0.12 23.7 449000 190000
60TP126 152.400 279.400 50.800 14.29 277.81 153.99 265.1 166.7 3.2 14.2 2700 1000
6.0000 11.0000 2.0000 0.562 10.938 6.062 10.44 6.56 0.12 31.4 608000 226000
60TP127 152.400 304.800 50.800 14.29 303.31 153.99 287.3 169.9 3.2 17.7 3220 1110
6.0000 12.0000 2.0000 0.562 11.938 6.062 11.31 6.69 0.12 39.4 725000 250000
70TP129 177.800 254 50.800 14.29 251.62 180.18 242.9 188.9 3.2 9.2 1620 663
7.0000 10.0000 2.0000 0.562 9.906 7.094 9.56 7.44 0.12 20.2 365000 149000
70TP130 177.800 279.400 50.800 14.29 277.02 180.18 266.7 190.5 3.2 12.8 2400 930
7.0000 11.0000 2.0000 0.562 10.906 7.094 10.50 7.50 0.12 28.3 540000 209000
70TP131 177.800 304.800 50.800 14.29 302.42 180.18 288.9 193.7 3.2 16.8 3090 1080
7.0000 12.0000 2.0000 0.562 11.906 7.094 11.38 7.62 0.12 37.0 695000 242000
70TP132 177.800 355.600 76.200 20.64 353.22 180.18 335 198.4 6.4 36.3 4490 1750
7.0000 14.0000 3.0000 0.812 13.906 7.094 13.19 7.81 0.25 80.1 1010000 394000
Caption:
A
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
TIMKEN PRODUCTS CATALOG B447
•
Caption:
ROLLER BEARINGS
CYLINDRICAL ROLLER THRUST BEARINGS TYPE TP – continued
Washers
Shoulder Diameter
Load Rating
Bearing Bore O.D. Height Thickness Small Large Shaft Housing Fillet(1) Wt. Static Dynamic Number d D T T1 Diameter Bore H E Radius Load Load
O.D. I.D.
r
Rating Rating
D1 d1 (Min.) (Max.) (Max.) Coa Ct
A
B
A
mm mm mm mm mm mm mm mm mm kg kN kN in. in. in. in. in. in. in. in. in. lbs. lbs. lbs.
80TP134 203.2 304.8 76.2 20.64 302.42 205.58 292.1 215.9 6.4 20.5 2660 1150
8.0000 12.0000 3.0000 0.812 11.906 8.094 11.50 8.50 0.25 45.1 599000 258000
80TP135 203.2 355.6 76.2 20.64 353.22 205.58 336.6 222.2 6.4 33 4230 1730
8.0000 14.0000 3.0000 0.812 13.906 8.094 13.25 8.75 0.25 72.8 950000 389000
80TP136 203.2 406.4 76.2 20.64 404.02 205.58 382.6 227.0 6.4 44.5 5740 2310
8.0000 16.0000 3.0000 0.812 15.906 8.094 15.06 8.94 0.25 98.1 1290000 520000
90TP139 228.6 355.6 76.2 20.64 353.22 230.98 339.7 244.5 6.4 29.3 3910 1460
9.0000 14.0000 3.0000 0.812 13.906 9.094 13.38 9.62 0.25 64.5 879000 328000
90TP140 228.6 406.4 76.2 20.64 404.02 230.98 385.8 249.2 6.4 43.6 5560 2140
9.0000 16.0000 3.0000 0.812 15.906 9.094 15.19 9.81 0.25 96.2 1250000 482000
100TP143 254 406.4 76.2 20.64 404.02 256.38 387.4 273.0 6.4 39.5 5160 1750
10.0000 16.0000 3.0000 0.812 15.906 10.094 15.25 10.75 0.25 86.6 1160000 394000
100TP144 254 457.2 95.25 26.19 454.82 256.38 435.0 276.2 6.4 68.8 7210 2690
10.0000 18.0000 3.7500 1.031 17.906 10.094 17.12 10.88 0.25 151.8 1620000 604000
100TP145 254 508 95.25 26.19 505.62 256.38 481.0 281.0 6.4 91.7 9560 3670
10.0000 20.0000 3.7500 1.031 19.906 10.094 18.94 11.06 0.25 202.2 2150000 825000
120TP151 304.8 457.2 95.25 26.19 454.82 307.18 438.2 323.8 6.4 56.7 6340 2300
12.0000 18.0000 3.7500 1.031 17.906 12.094 17.25 12.75 0.25 125.1 1420000 518000
120TP152 304.8 508 114.3 31.75 505.62 307.18 484.2 328.6 6.4 104.5 7900 3300
12.0000 20.0000 4.5000 1.250 19.906 12.094 19.06 12.94 0.25 230.5 1780000 743000
120TP153 304.8 609.6 114.3 31.75 607.22 307.18 584.2 330.2 6.4 168.5 12900 4680
12.0000 24.0000 4.5000 1.250 23.906 12.094 23.00 13.00 0.25 371.5 2900000 1050000
140TP158 355.6 508 95.25 26.19 504.82 358.78 489.0 374.6 6.4 62.6 7200 2610
14.0000 20.0000 3.7500 1.031 19.875 14.125 19.25 14.75 0.25 138.1 1620000 588000
140TP159 355.6 558.8 95.25 26.19 555.62 358.78 535.0 379.4 6.4 89.6 10000 3750
14.0000 22.0000 3.7500 1.031 21.875 14.125 21.06 14.94 0.25 197.5 2250000 802000
140TP160 355.6 609.6 95.25 26.19 606.4 358.78 581.0 384.2 6.4 125.3 12600 4040
14.0000 24.0000 3.7500 1.031 23.875 14.125 22.88 15.12 0.25 276.2 2840000 908000
160TP164 406.4 558.8 114.3 31.75 555.6 409.6 539.8 425.4 6.4 85.9 7860 3090
16.0000 22.0000 4.5000 1.250 21.875 16.125 21.25 16.75 0.25 189.4 1770000 695000
160TP165 406.4 609.6 114.3 31.75 606.4 409.6 585.8 430.2 6.4 121.4 11200 4170
16.0000 24.0000 4.5000 1.250 23.875 16.125 23.06 16.94 0.25 267.7 2510000 937000
160TP166 406.4 660.4 114.3 31.75 657.2 409.6 633.4 433.4 6.4 168.8 13800 4710
16.0000 26.0000 4.5000 1.250 25.875 16.125 24.94 17.06 0.25 372.1 3090000 1060000
180TP168 457.2 660.4 127 34.92 657.2 460.4 635 482.6 6.4 148.8 11800 4090
18.0000 26.0000 5.0000 1.375 25.875 18.125 25.00 19.00 0.25 328.1 2650000 919000
180TP169 457.2 711.2 127 34.92 708.0 460.4 684.2 484.2 6.4 195.3 15500 5480
18.0000 28.0000 5.0000 1.375 27.875 18.125 26.94 19.06 0.25 430.7 3480000 1230000
180TP170 457.2 762 139.7 38.10 758.8 460.4 735.0 484.2 6.4 280.7 19700 6840
18.0000 30.0000 5.5000 1.500 29.875 18.125 28.94 19.06 0.25 618.9 4430000 1540000
200TP171 508 711.2 139.7 38.10 708.0 511.2 685.8 533.4 6.4 178 13100 4710
20.0000 28.0000 5.5000 1.500 27.875 20.125 27.00 21.00 0.25 392.5 2940000 1060000
200TP172 508 762 139.7 38.10 758.8 511.2 736.6 533.4 6.4 232.2 17500 6370
20.0000 30.0000 5.5000 1.500 29.875 20.125 29.00 21.00 0.25 512.0 3930000 1430000
200TP173 508 812.8 152.4 42.07 809.6 511.2 787.4 533.4 6.4 317 22400 7610
20.0000 32.0000 6.0000 1.656 31.875 20.125 31.00 21.00 0.25 698.9 5050000 1700000
220TP174 558.8 762 139.7 38.10 758.8 562 736.6 584.2 6.4 192.7 14200 5070
22.0000 30.0000 5.5000 1.500 29.875 22.125 29.00 23.00 0.25 425.0 3200000 1140000
220TP175 558.8 812.8 139.7 38.10 809.6 562.0 782.6 589.0 6.4 250.6 19000 6570
22.0000 32.0000 5.5000 1.500 31.875 22.125 30.81 23.19 0.25 552.6 4270000 1480000
220TP176 558.8 863.6 152.4 42.07 860.4 562.0 838.2 584.2 6.4 340.9 24500 8200
22.0000 34.0000 6.0000 1.656 33.875 22.125 33.00 23.00 0.25 751.6 5500000 1840000
240TP177 609.6 812.8 139.7 38.10 809.6 612.8 790.6 631.8 9.5 206.5 16000 5650
24.0000 32.0000 5.5000 1.500 31.875 24.125 31.12 24.88 0.38 455.4 3600000 1270000
240TP178 609.6 863.6 139.7 38.10 860.4 612.8 838.2 635.0 9.5 269 20500 6880
24.0000 34.0000 5.5000 1.500 33.875 24.125 33.00 25.00 0.38 593.2 4610000 1550000
240TP179 609.6 914.4 152.4 42.07 911.2 612.8 889.0 635.0 9.5 364.7 25200 8450
24.0000 36.0000 6.0000 1.656 35.875 24.125 35.00 25.00 0.38 804.2 5670000 1900000
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
Caption:
•
B448 TIMKEN PRODUCTS CATALOG
Thrust Bearings
Thrust
CYLINDRICAL ROLLER THRUST BEARINGS TYPE TPS
D1
• Similar to Type TP except one washer
is spherically ground to seat against an aligning washer. This makes it adaptable to initial misalignment.
• Not suggested for operating conditions where alignment is constantly changing.
H
Rt
Caption:
d
r
d1
E
D
A
B
C
r
DIMENSIONS – LOAD RATINGS
Washers
Shoulder Diameter
Load Rating
Bearing Bore O.D. Height Aligning Small Large Shaft Housing Fillet(1) Wt. Static Dynamic Number d D C Washer Diameter Bore Radius Load Load radius O.D. I.D. H E r Rating Rating Rt D1 d1 (Min.) (Max.) (Max.) Coa Ct
mm mm mm mm mm mm mm mm mm kg kN kN in. in. in. in. in. in. in. in. in. lbs. lbs. lbs.
20TPS103 50.800 160.325 46.038 190.50 150.81 52.39 141.3 85.7 1.6 5.2 814 331
2.0000 6.3120 1.8125 7.500 5.938 2.062 5.56 3.38 0.06 11.4 183000 74500
20TPS104 50.800 185.725 46.038 241.30 176.21 52.39 163.5 108.0 1.6 7.12 1010 398
2.0000 7.3120 1.8125 9.500 6.938 2.062 6.44 4.25 0.06 15.7 227000 89500
30TPS106 76.200 160.325 46.038 152.40 150.81 77.79 142.9 101.6 1.6 4.5 747 340
3.0000 6.3120 1.8125 6.000 5.938 3.062 5.62 4.00 0.06 9.9 168000 76500
30TPS107 76.200 185.725 46.038 241.30 176.21 77.79 166.7 111.1 1.6 6.4 1040 414
3.0000 7.3120 1.8125 9.500 6.938 3.062 6.56 4.38 0.06 14.2 234000 93200
30TPS108 76.200 211.125 46.038 304.80 201.61 77.79 188.9 133.4 1.6 8.7 1380 520
3.0000 8.3120 1.8125 12.000 7.938 3.062 7.44 5.25 0.06 19.2 311000 117000
35TPS113 88.900 138.908 33.338 127.00 130.97 91.28 123.8 103.2 1.6 1.9 381 180
3.5000 5.4688 1.3125 5.000 5.156 3.594 4.88 4.06 0.06 4.1 85600 40400
40TPS114 101.600 187.327 58.738 161.93 176.21 103.98 168.3 127 1.6 7.0 1030 503
4.0000 7.3750 2.3125 6.375 6.938 4.094 6.62 5.00 0.06 15.4 231000 113000
40TPS115 101.600 212.725 58.738 215.90 201.61 103.98 190.5 133.4 1.6 10.0 1370 589
4.0000 8.3750 2.3125 8.500 7.938 4.094 7.50 5.25 0.06 22.1 308000 132000
40TPS116 101.600 238.125 58.738 254.00 227.01 103.98 214.3 149.2 1.6 13.4 1770 676
4.0000 9.3750 2.3125 10.000 8.938 4.094 8.44 5.88 0.06 29.5 397000 152000
40TPS117 101.600 266.7 58.738 355.60 252.41 103.98 238.1 165.1 1.6 17.1 2220 896
4.0000 10.5000 2.3125 14.000 9.938 4.094 9.38 6.50 0.06 37.7 498000 202000
50TPS119 127 215.9 58.738 187.33 201.61 130.18 190.5 152.4 1.6 8.4 1280 592
5.0000 8.5000 2.3125 7.375 7.938 5.125 7.50 6.00 0.06 18.5 288000 133000
50TPS120 127 241.3 58.738 266.70 227.01 130.18 215.9 155.6 1.6 11.8 1710 716
5.0000 9.5000 2.3125 10.500 8.938 5.125 8.50 6.12 0.06 26.1 385000 161000
50TPS121 127 266.7 66.675 323.85 252.41 130.18 239.7 158.8 3.2 17.6 2180 841
5.0000 10.5000 2.6250 12.750 9.938 5.125 9.44 6.25 0.12 38.7 491000 189000
50TPS122 127 292.1 66.675 406.40 277.81 130.18 261.9 177.8 3.2 22.1 2760 996
5.0000 11.5000 2.6250 16.000 10.938 5.125 10.31 7.00 0.12 48.8 620000 224000
50TPS123 127.000 317.5 66.675 501.65 303.21 130.18 288.9 184.1 3.2 27.2 3290 1170
5.0000 12.5000 2.6250 19.750 11.938 5.125 11.38 7.25 0.12 60.0 739000 262000
60TPS124 152.400 241.3 66.675 171.45 227.01 155.58 217.5 184.1 3.2 10.8 1410 600
6.0000 9.5000 2.6250 6.750 8.938 6.125 8.56 7.25 0.12 23.8 317000 135000
60TPS125 152.400 266.7 66.675 241.30 252.46 155.58 241.3 187.3 3.2 15.2 2000 845
6.0000 10.5000 2.6250 9.500 9.938 6.125 9.50 7.38 0.12 33.5 449000 190000
60TPS126 152.400 292.1 66.675 342.90 277.81 155.58 265.1 187.3 3.2 20.1 2700 1000
6.0000 11.5000 2.6250 13.500 10.938 6.125 10.44 7.38 0.12 44.3 607000 225000
60TPS127 152.400 317.5 66.675 431.80 303.21 155.58 287.3 190.5 3.2 25.2 3220 1110
6.0000 12.5000 2.6250 17.000 11.938 6.125 11.31 7.50 0.12 55.6 725000 250000
70TPS129 177.800 266.7 66.675 206.38 251.62 180.8 242.9 206.4 3.2 12.7 1620 663
7.0000 10.5000 2.6250 8.125 9.906 7.125 9.56 8.12 0.12 27.9 365000 149000
70TPS130 177.800 292.100 66.675 292.10 277.02 180.98 266.7 209.6 3.2 17.7 2400 930
7.0000 11.5000 2.6250 11.500 10.906 7.125 10.50 8.25 0.12 39.1 540000 209000
70TPS131 177.800 317.500 66.675 390.53 302.42 180.98 288.9 209.6 3.2 23.3 3090 1080
7.0000 12.5000 2.6250 15.375 11.906 7.125 11.38 8.25 0.12 51.3 695000 242000
Caption:
A
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
TIMKEN PRODUCTS CATALOG B449
•
Caption:
ROLLER BEARINGS
CYLINDRICAL ROLLER THRUST BEARINGS TYPE TPS – continued
A
B
A
DIMENSIONS – LOAD RATINGS - continued
Bearing Bore O.D. Height Aligning Small Large Shaft Housing Fillet(1) Wt. Static Dynamic Number d D C Washer Diameter Bore Radius Load Load radius O.D. I.D. H E r Rating Rating Rt D1 d1 (Min.) (Max.) (Max.) Coa Ct 70TPS132 177.800 374.650 101.600 390.53 353.22 180.98 335.0 228.6 6.4 52.6 4490 1750
7.0000 14.7500 4.0000 15.375 13.906 7.125 13.19 9.00 0.25 115.9 1010000 394000
80TPS134 203.200 323.850 101.600 215.90 302.42 207.96 292.1 238.1 6.4 29.8 2660 1150
8.0000 12.7500 4.0000 8.500 11.906 8.188 11.50 9.38 0.25 65.8 599000 258000
80TPS135 203.200 374.650 101.600 304.80 353.22 207.96 336.6 263.5 6.4 47.7 4230 1730
8.0000 14.7500 4.0000 12.000 13.906 8.188 13.25 10.38 0.25 105.2 950000 389000
80TPS136 203.200 428.625 101.600 495.30 404.02 209.55 382.6 266.7 6.4 68.2 5740 2310
8.0000 16.8750 4.0000 19.500 15.906 8.250 15.06 10.50 0.25 150.4 1290000 520000
90TPS139 228.600 374.650 101.600 304.80 353.22 234.95 339.7 263.5 6.4 42.2 3910 1460
9.0000 14.7500 4.0000 12.000 13.906 9.250 13.38 10.38 0.25 93.1 879000 328000
90TPS140 228.600 428.625 101.600 495.30 404.02 234.95 385.8 266.7 6.4 63.3 5560 2140
9.0000 16.8750 4.0000 19.500 15.906 9.250 15.19 10.50 0.25 139.5 1250000 482000
100TPS143 254.000 428.625 101.600 425.45 404.02 260.36 387.4 292.1 6.4 56.2 5160 1750
10.0000 16.8750 4.0000 16.750 15.906 10.250 15.25 11.50 0.25 124.0 1160000 394000
100TPS144 254.000 479.425 127.000 508.00 454.82 260.36 435.0 304.8 6.4 99.5 7210 2690
10.0000 18.8750 5.0000 20.000 17.906 10.250 17.12 12.00 0.25 219.5 1620000 604000
100TPS145 254.000 530.225 127.000 609.6 505.62 260.36 481.0 336.6 6.4 131.8 9560 3670
10.0000 20.8750 5.0000 24.000 19.906 10.250 18.94 13.25 0.25 290.6 2150000 825000
120TPS151 304.800 479.425 127.000 390.53 454.82 311.15 438.2 346.1 6.4 82.1 6340 2300
12.0000 18.8750 5.0000 15.375 17.906 12.250 17.25 13.62 0.25 181.0 1420000 518000
120TPS152 304.800 530.225 152.400 619.13 505.62 311.15 484.2 352.4 6.4 139.4 7900 3300
12.0000 20.8750 6.0000 24.375 19.906 12.250 19.06 13.88 0.25 307.4 1780000 743000
120TPS153 304.800 631.825 152.400 723.90 607.22 311.15 584.2 406.4 6.4 236.9 12900 4680
12.0000 24.8750 6.0000 28.500 23.906 12.250 23.00 16.00 0.25 522.4 2900000 1050000
140TPS158 355.600 530.225 123.825 495.30 504.82 361.95 489.0 393.7 6.4 89.2 7200 2610
14.0000 20.8750 4.8750 19.500 19.875 14.250 19.25 15.50 0.25 196.6 1620000 588000
140TPS159 355.600 581.025 123.825 723.90 555.62 361.95 535.0 393.7 6.4 125.0 10000 3570
14.0000 22.8750 4.8750 28.500 21.875 14.250 21.06 15.50 0.25 275.6 2250000 802000
140TPS160 355.600 631.825 123.825 917.58 606.62 361.95 581.0 415.9 6.4 170.9 12600 4040
14.0000 24.8750 4.8750 36.125 23.875 14.250 22.88 16.38 0.25 376.9 2840000 908000
160TPS164 406.400 581.025 152.400 444.50 555.62 412.75 539.8 444.5 6.4 123.9 7860 3090
16.0000 22.8750 6.0000 17.500 21.875 16.250 21.25 17.50 0.25 273.2 1770000 695000
160TPS165 406.400 635.000 152.400 596.90 606.42 412.75 585.8 457.2 6.4 174.4 11200 4170
16.0000 25.0000 6.0000 23.500 23.875 16.250 23.06 18.00 0.25 384.6 2510000 937000
160TPS166 406.400 685.800 152.400 752.48 657.22 412.75 633.4 469.9 6.4 229.8 13800 4710
16.0000 27.0000 6.0000 29.625 25.875 16.250 24.94 18.50 0.25 506.7 3090000 1060000
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
Washers
Shoulder Diameter
Load Rating
mm mm mm mm mm mm mm mm mm kg kN kN in. in. in. in. in. in. in. in. in. lbs. lbs. lbs.
Caption:
•
B450 TIMKEN PRODUCTS CATALOG
Thrust Bearings
Thrust
CROSSED ROLLER THRUST BEARINGS TYPE XR AND JXR
• Withstands high overturning moments.
• Applications include machine tool table bearing for vertical boring and grinding machines. Other applications include various pivot and pedestal applications.
• Dimensions given in the following table relate to bearing type TXRDO, which is the most common form of crossed roller bearing.
• TXRDO bearing has a double outer race and two inner races with rollers spaced by separators.
• Other mounting con?gurations and sizes of crossed roller bearing can be supplied to meet particular assembly or setting requirements.
• Contact your Timken representative for more information.
XR496051
A
B
DIMENSIONS – LOAD RATINGS
Dimensions
Load Ratings
Factor
Bearing
Bore
O.D. Height Radius(1)
Two-Row Thrust
Number
d
D T R
radial k(2)
mm
mm mm mm
kN kN
in.
in. in. in.
lbs. lbs.
203.200 279.400 31.750
1.5
51300
61600
0.48
8.0000 11.0000
1.2500
0.06
11500
13800
JXR637050
300.000 400.000 37.000
1.5
63000
80100
0.45
11.8110 15.7480
1.4567
0.06
14200
18000
JXR652050
310.000 425.000 45.000
2.5
82200
102000
0.46
12.2047 16.7323
1.7717
0.10
18500
23000
XR678052
330.200 457.200 63.500
3.3
100000
123000
0.47
13.0000 18.0000
2.50000 0.13
22500
27600
JXR699050
370.000 495.000 50.000
3.0
93600
119000
0.45
14.5669 19.4882
1.9685
0.12
21000
26700
XR766051
457.200 609.600 63.500
3.3
141000
178000
0.45
18.0000 24.0000
2.5000
0.13
31600
40100
XR820060
580.000 760.000 80.000
6.4
240000
299000
0.46
22.8346 29.9213
3.1496
0.25
53900
67200
XR855053
685.800 914.400 79.375
3.3
270000
344000
0.45
27.0000 36.0000
3.1250
0.13
60700
77200
XR882055
901.700 1117.600 82.550
3.3
300000
396000
0.44
35.50000 44.0000
3.2500
0.13
67400
88900
XR889058
1028.700 1327.150 114.300
3.3
405000
534000
0.44
40.5000 52.2500
4.5000
0.13
91000
120000
XR897051
1549.400 1828.800 101.600
3.3
518000
699000
0.43
61.0000 72.0000
4.0000
0.13
116000
157000
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
(2) Centrifugal force constant. See engineering section for calculations using this factor.
A
Caption:
TIMKEN PRODUCTS CATALOG B451
•
ROLLER BEARINGS
Caption:
TAPERED ROLLER THRUST BEARINGS TYPE TTHD
Caption:
• Consists of two tapered thrust races, rollers and cage.
• All components are separable.
• Generally a heavy-duty bearing and can operate at a relatively high speed.
• Extensively used in numerous applications including oil well swivels, pulp re?ners, extruders and piercing mill thrust blocks.
A
B
Caption:
Shaft Housing Fillet Fillet Bore Outside Width Radius Radius
Remarks
Bearing Fig
Diameter
Mass
Number No. d D T R r
mm mm mm mm mm kg in. in. in. in. in. lbs.
T135
2 34.925 76.200 15.875 1.5 1.5 0.4
2 1.3750 3.0000 0.6250 0.06 0.06 0.88
T135F
1 34.925 76.200 15.875 1.5 1.5 0.4
1 1.3750 3.0000 0.6250 0.06 0.06 0.88
T200A
Caption:
A
2 50.800 109.538 22.225 2.3 2.3 1.1
2 2.0000 4.3125 0.8750 0.09 0.09 2.40
T311
2 76.200 161.925 33.338 3.3 3.3 3.6
2 3.0000 6.3750 1.3215 0.13 0.13 8.02
T311F
1 76.200 161.925 33.338 3.3 3.3 3.6
1 3.0000 6.3750 1.3215 0.13 0.13 8.02
*T311FS - T311S 8 76.200 161.925 49.212 3.3 3.3 –
T311FS - T311S, SPHERICAL RADIUS =
8 3.0000 6.3750 1.9375 0.13 0.13 – 457.200 mm (18”)
T411
2 101.600 215.900 46.038 3.3 3.3 8.9
2 4.0000 8.5000 1.8125 0.13 0.13 19.60
•
B452 TIMKEN PRODUCTS CATALOG
Thrust Bearings
Thrust
Shaft Housing Fillet Fillet Bore Outside Width Radius Radius
Remarks
Bearing Fig
Diameter
Mass
Number No. d D T R r
mm mm mm mm mm kg in. in. in. in. in. lbs.
T411F
1 101.600 215.900 46.038 3.3 3.3 8.9
1 4.0000 8.5000 1.8125 0.13 0.13 19.60
*T411FAS - T411S 8 76.200 215.900 65.088 3.3 3.3 –
T411FAS - T411S, SPHERICAL RADIUS =
8 3.0000 8.5000 2.5625 0.13 0.13 – 508.000 mm (20”)
A
B
T441
2 111.760 223.520 55.880 3.3 3.3 11.4
2 4.4000 8.8000 2.2000 0.13 0.13 25.13
T441F
1 111.760 223.520 55.880 3.3 3.3 11.4
1 4.4000 8.8000 2.2000 0.13 0.13 25.13
T451
2 114.300 250.825 53.975 4.0 4.0 15.0
2 4.5000 9.8750 2.1250 0.16 0.16 33.07
T511
2 127.000 266.700 58.738 4.8 4.8 17.8
2 5.0000 10.5000 2.3125 0.19 0.19 39.24
T511A
2 128.588 266.700 58.738 4.8 4.8 17.8
2 5.0625 10.5000 2.3125 0.19 0.19 39.24
T511F
1 127.000 266.700 58.738 4.8 4.8 17.8
1 5.0000 10.5000 2.3125 0.19 0.19 39.24
*T511FS - T511S 8 127.000 266.700 79.375 4.8 4.8 –
T511FS - T511S, SPHERICAL RADIUS =
8 5.0000 10.5000 3.1250 0.19 0.19 – 609.600 mm (24”)
*T511FSA - T511S 8 101.600 266.700 79.375 4.8 4.8 –
T511FSA - T511S, SPHERICAL RADIUS =
8 4.0000 10.5000 3.1250 0.19 0.19 – 609.600 mm (24”)
*T511FSA - T511SA 7 101.600 266.700 79.375 4.8 4.8 –
T511FSA - T511SA, SPHERICAL RADIUS =
7 4.0000 10.5000 3.1250 0.19 0.19 – 609.600 mm (24”)
T520
2 127.000 250.825 55.563 4.8 4.8 13.9
2 5.0000 9.8750 2.1875 0.19 0.19 30.64
T611
2 152.400 317.500 69.850 6.4 6.4 29.3
2 6.0000 12.5000 2.7500 0.25 0.25 64.60
T611F
1 152.400 317.500 69.850 6.4 6.4 29.3
1 6.0000 12.5000 2.7500 0.25 0.25 64.60
*T611FS - T611S 8 152.400 317.500 87.313 6.4 6.4 –
T611FS - T611S, SPHERICAL RADIUS =
8 6.0000 12.5000 3.4375 0.25 0.25 – 711.200 mm (28”)
*T611FS - T611SA 8 152.400 317.500 87.313 6.4 6.4 –
T611FS - T611SA, SPHERICAL RADIUS =
8 6.0000 12.5000 3.4375 0.25 0.25 – 762.000 mm (30”)
*T611FSA - T611SA 7 SOLID 317.500 87.313 N/A 6.4 –
T611FSA - T611SA, SPHERICAL RADIUS =
7 12.5000 3.4375 N/A 0.25 – 762.000 mm (30”)
*T611FS - T611SB 8 152.400 317.500 87.313 6.4 6.4 –
T611FS - T611SB, SPHERICAL RADIUS =
8 6.0000 12.5000 3.4375 0.25 0.25 – 755.700 mm (29.75”)
T651
2 165.100 311.150 88.900 6.4 6.4 38.3
2 6.5000 12.2500 3.5000 0.25 0.25 84.44
T661
2 168.275 304.800 69.850 6.4 6.4 27.8
2 6.6250 12.0000 2.7500 0.25 0.25 61.29
T691
2 174.625 358.775 82.550 6.4 6.4 45.3
2 6.8750 14.1250 3.2500 0.25 0.25 99.87
T709
4 177.800 431.800 101.600 6.4 6.4 86.3
4 7.0000 17.0000 4.0000 0.25 0.25 190.26
T711
2 177.800 368.300 82.550 8.0 8.0 48.4
2 7.0000 14.5000 3.2500 0.31 0.31 106.70
T711F
1 177.800 368.300 82.550 8.0 8.0 48.4
1 7.0000 14.5000 3.2500 0.31 0.31 106.70
T711FS - T711S 7 177.800 368.300 104.775 8.0 8.0 –
7 7.0000 14.5000 4.1250 0.31 0.31 –
*T711FS - T711SA 8 177.800 368.300 101.600 8.0 8.0 –
T711FS - T711SA, SPHERICAL RADIUS =
8 7.0000 14.5000 4.0000 0.31 0.31 – 762.000 mm (30”)
A
*T711FSS - T711S 7 SOLID 368.300 104.775 N/A 8.0 –
T711FSS - T711S, SPHERICAL RADIUS =
7 14.5000 4.1250 N/A 0.31 – 622.300 mm (24.5”)
Caption:
T811
2 203.200 419.100 92.075 9.7 9.7 69.3
2 8.0000 16.5000 3.6250 0.38 0.38 152.78
T811F
1 203.200 419.100 92.075 9.7 9.7 69.3
1 8.0000 16.5000 3.6250 0.38 0.38 152.78
*T811FS - T811S 7 203.200 419.100 123.825 9.7 9.7 –
T811FS - T811S, SPHERICAL RADIUS =
7 8.0000 16.5000 4.8750 0.38 0.38 – 508.000 mm (20”)
*T811FS - T811SA 8 203.200 422.275 115.880 9.7 9.7 –
T811FS - T811SA, SPHERICAL RADIUS =
8 8.0000 16.6250 4.5625 0.38 0.38 – 838.200 mm (33”), LOWER RACE OD = 419.100 mm (16.5000”)
TIMKEN PRODUCTS CATALOG B453
•
ROLLER BEARINGS
Caption:
THRUST BEARINGS TYPE TTHD - continued
Caption:
A
B
Shaft Housing Fillet Fillet Bore Outside Width Radius Radius
Remarks
Bearing Fig
Diameter
Mass
Number No. d D T R r
mm mm mm mm mm kg in. in. in. in. in. lbs.
*T811FSA - T811SB 7 SOLID 422.275 120.650 N/A 9.7 –
T811FSA - T811SB, SPHERICAL RADIUS =
7 16.6250 4.7500 N/A 0.38 – 506.000 mm (20”), LOWER RACE OD = 419.100 mm (16.5000”)
T811X
2 203.200 419.100 120.650 9.7 9.7 92.7
2 8.0000 16.5000 4.7500 0.38 0.38 204.37
*T811 - T811XA 2 203.200 419.100 106.363 9.7 9.7 –
T811 - T811XA, 2 BORES, OTHER BORE =
2 8.0000 16.5000 4.1875 0.38 0.38 – 201.613 mm (7.9375”)
T911
9 228.600 482.600 104.775 N/A 11.2 105.0
9 9.0000 19.0000 4.1250 N/A 0.44 231.49
T911A
9 234.950 482.600 104.775 N/A 11.2 103.0
9 9.2500 19.0000 4.1250 N/A 0.44 227.08
T911F
A
10 228.600 482.600 104.775 N/A 11.2 –
10 9.0000 19.0000 4.1250 N/A 0.44 –
*T911 -T911A 9 228.600 482.600 104.775 N/A 11.2 –
T911 - T911A, 2 BORES, OTHER BORE =
Caption:
9 9.0000 19.0000 4.1250 N/A 0.44 – 234.950 mm (9.2500”)
*T911FS -T911S 11 228.600 482.600 146.050 N/A 11.2 –
T911FS - T911S, SPHERICAL RADIUS =
11 9.0000 19.0000 5.7500 N/A 0.44 – 635.000 mm (25”)
*T911FS -T911SA 12 228.600 482.600 131.763 N/A 11.2 –
T911FS - T911SA, SPHERICAL RADIUS =
12 9.0000 19.0000 5.1875 N/A 0.44 – 1295.400 mm (51”)
*T911FS -T911SB 12 228.600 482.600 114.300 N/A 11.2 –
T911FS - T911SB, SPHERICAL RADIUS =
12 9.0000 19.0000 4.5000 N/A 0.44 – 895.350 mm (35.25”)
T921
9 234.950 546.100 127.000 N/A 16.0 171.0
9 9.2500 21.5000 5.0000 N/A 0.63 376.99
•
B454 TIMKEN PRODUCTS CATALOG
Thrust Bearings
Thrust
Shaft Housing Fillet Fillet Bore Outside Width Radius Radius
Remarks
Bearing Fig
Diameter
Mass
Number No. d D T R r
mm mm mm mm mm kg in. in. in. in. in. lbs.
T921F
10 234.950 546.100 127.000 N/A 16.0 171.0
10 9.2500 21.5000 5.0000 N/A 0.63 376.99
T1011
9 254.000 539.750 117.475 N/A 11.2 147.0
9 10.0000 21.2500 4.6250 N/A 0.44 324.08
*T1011FS - T1011S 12 254.000 539.750 149.225 N/A 11.2 –
T1011FS - T1011S, SPHERICAL RADIUS =
A
B
12 10.0000 21.2500 5.8750 N/A 0.44 – 1066.8 mm (42”)
*T1011FS - T1011SA 11 254.000 539.750 158.750 N/A 11.2 –
T1011FS - T1011SA, SPHERICAL RADIUS =
11 10.0000 21.2500 6.2500 N/A 0.44 – 635.000 mm (25”)
*T1011FS - T1011SC 11 254.000 539.750 158.750 N/A 11.2 –
T1011FS - T1011SC, SPHERICAL RADIUS =
11 10.0000 21.2500 6.2500 N/A 0.44 – 635.000 mm (25”)
T1115
9 279.400 495.300 133.350 N/A 6.4 125.0
9 11.0000 19.5000 5.2500 N/A 0.25 275.58
T1120
9 279.400 603.250 136.525 N/A 11.2 212.0
9 11.0000 23.7500 5.3750 N/A 0.44 467.38
T1120F
10 279.400 603.250 136.525 N/A 11.2 212.0
10 11.0000 23.7500 5.3750 N/A 0.44 467.38
*T1120FS - T1120S 12 279.400 603.250 136.525 N/A 11.2 –
T1120FS - T1120S, SPHERICAL RADIUS =
12 11.0000 23.7500 5.3750 N/A 0.44 – 1308.1 mm (51.5”)
T1421
9 355.600 533.400 101.600 N/A 6.4 84.1
9 14.0000 21.0000 4.0000 N/A 0.25 185.41
T1421F
10 355.600 533.400 101.600 N/A 6.4 84.1
10 14.0000 21.0000 4.0000 N/A 0.25 185.41
T1750
2 44.450 84.734 18.258 2.3 2.3 0.5
2 1.7500 3.3360 0.7188 0.09 0.09 1.08
T2520
2 63.500 117.475 25.400 2.3 2.3 1.3
2 2.5000 4.6250 1.0000 0.09 0.09 2.95
*T3004W
1 76.454 167.081 44.450 3.3 N/A –
T3004W, RETAINER ON OD
1 3.0100 6.5780 1.7500 0.13 N/A –
T7519
2 190.000 355.600 74.219 6.4 6.4 35.9
2 7.4803 14.0000 2.9220 0.25 0.25 79.15
*T8920FA - T8920FB 11 168.275 638.175 152.400 N/A 11.0 –
NO SPHERICAL RADIUS
11 6.6250 25.1250 6.0000 N/A 0.43 –
T9020
9 228.600 431.800 88.773 N/A 9.7 65.7
9 9.0000 17.0000 3.4950 N/A 0.38 144.84
*T9030FS - T9030S 7 SOLID 482.600 165.000 N/A 11.2 –
T9030FS - T9030S, SPHERICAL RADIUS =
7 19.0000 6.5354 N/A 0.44 – 635.000 mm (25”)
*T9030FS - T9030SA 8 SOLID 482.600 150.622 N/A 11.2 –
T9030FS - T9030SA, SPHERICAL RADIUS =
8 19.0000 5.9300 N/A 0.44 – 1295.400 mm (51”)
*T9030FSA - T9030SA 12 168.275 482.600 131.763 N/A 11.2 –
T9030FSA - T9030SA, SPHERICAL RADIUS =
12 6.6250 19.0000 5.1875 N/A 0.44 – 1295.400 mm (51”)
*T9030FSA - T9030SB 12 168.275 482.600 131.763 N/A 11.2 –
T9030FSA - T9030SB, SPHERICAL RADIUS =
12 6.6250 19.0000 5.1875 N/A 0.44 – 1066.800 mm (42”)
10 234.950 546.100 127.000 N/A 16.0 –
10 9.2500 21.5000 5.0000 N/A 0.63 –
T9250FA 10 139.700 546.100 127.000 N/A 16.0 –
10 5.5000 21.5000 5.0000 N/A 0.63 –
*T9250FAS - T9250SA 12 139.700 549.275 155.575 N/A 16.0 –
T9250FAS - T9250SA, SPHERICAL RADIUS =
T9250F
12 5.5000 21.6250 6.1250 N/A 0.63 – 1295.400 mm (51”)
*T9250FAS - T9250SC 12 139.700 549.275 155.575 N/A 16.0 –
T9250FAS - T9250SC, SPHERICAL RADIUS =
12 5.5000 21.6250 6.1250 N/A 0.63 – 1295.400 mm (51”)
*T9250FS - T9250S 11 234.950 546.100 168.275 N/A 16.0 –
T9250FS - T9250S, SPHERICAL RADIUS =
11 9.2500 21.5000 6.6250 N/A 0.63 – 641.350 mm (25.25”)
Caption:
12 9.2500 21.6250 6.1250 N/A 0.63 – 1295.400 mm (51”)
A
*T9250FS - T9250SA 12 234.950 549.275 155.575 N/A 16.0 –
T9250FS - T9250SA, SPHERICAL RADIUS =
*T9250FS - T9250SB 11 234.950 546.100 171.450 N/A 16.0 –
T9250FS - T9250SB, SPHERICAL RADIUS =
11 9.2500 21.5000 6.7500 N/A 0.63 – 558.800 mm (22”)
*T12040FS - T12040S 12 304.800 1146.175 317.500 N/A 19.0 –
T12040FS - T12040S, SPHERICAL RADIUS =
12 12.0000 45.1250 12.5000 N/A 0.75 – 2000.250 mm (78.75”), LOWER RACE OD = 1143.000 mm (45.0000”)
*T14214
13 355.600 533.400 101.600 N/A 6.4 –
T14214, 2 BORES, OTHER BORE =
13 14.0000 21.0000 4.0000 N/A 0.25 – 355.961 mm (14.0150”)
T14520
9 368.300 603.300 120.650 N/A 9.7 144.0
9 14.5000 23.7500 4.7500 N/A 0.38 317.47
TIMKEN PRODUCTS CATALOG B455
•
ROLLER BEARINGS
Caption:
THRUST BEARINGS TYPE TTHD - continued
Caption:
A
B
Shaft Housing Fillet Fillet Bore Outside Width Radius Radius
Remarks
Bearing Fig
Diameter
Mass
Number No. d D T R r
mm mm mm mm mm kg in. in. in. in. in. lbs.
T16021
9 406.400 711.200 146.050 N/A 9.7 264.0
9 16.0000 28.0000 5.7500 N/A 0.38 582.02
T16021F
10 406.400 711.200 146.050 N/A 9.7 264.0
10 16.0000 28.0000 5.7500 N/A 0.38 582.02
T16050
9 406.400 838.200 177.800 N/A 12.7 517.0
9 16.0000 33.0000 7.0000 N/A 0.5 1139.79
T17010FS - T17020S 12 431.800 942.975 260.350 N/A 12.7 –
12 17.0000 37.1250 10.2500 N/A 0.5 –
T48000
9 1219.200 1524.000 136.525 N/A 9.7 596.0
9 48.0000 60.0000 5.3750 N/A 0.38 1313.95
A
Caption:
•
B456 TIMKEN PRODUCTS CATALOG
Type TTVF
Thrust Bearings
Thrust
TAPERED ROLLER THRUST BEARINGS TYPE TTVF
D1
H
• Combines the outstanding features of tapered thrust and cylindrical roller bearings to offer the highest possible capacity of any thrust bearing of its size.
• One washer is perfectly ?at, while the second includes a tapered raceway matching the rollers.
• Originally developed for screwdown applications in metal rolling mills where thrust loads exceeding one million pounds are common.
d
rs MAX.
Caption:
T1
T
A
B
d1
rs MAX.
E
D
DIMENSIONS – LOAD RATINGS
Washers
Shoulder Diameter
Load Rating
Approx.
Bearing Bore O.D. Height Thickness Small Large Shaft Housing Fillet(1) Wt. Static Dynamic Limiting Number d D T T1 Diameter Bore Radius Load Load Speed
O.D. I.D. H E r Rating Rating (for Oil D1 d1 (Min.) (Max.) (Max.) Coa Ct Bath Only)
mm mm mm mm mm mm mm mm mm kg kN kN RPM in. in. in. in. in. in. in. in. in. lbs. lbs. lbs.
F-3167-B 101.575 215.875 46.038 9.53 215.14 102.59 193.7 108 2.5 9.3 1570.0 880.0
3.9990 8.4990 1.8125 0.375 8.470 4.039 7.62 4.25 0.10 20.5 353000 198000 1350
W-3217-B 127.000 266.700 58.738 12.70 265.94 127.51 238.1 149.2 3.6 18.6 2570.0 1350.0
5.0000 10.5000 2.3125 0.500 10.470 5.020 9.38 5.88 0.14 41.0 578000 304000 1090
S-4055-C 149.974 299.720 89.692 25.40 298.45 154 267.5 174.6 3 35.8 3350.0 1850.0
5.9045 11.8000 3.5312 1.000 11.750 6.063 10.53 6.88 0.12 79.0 754000 416000 970
G-3304-B 168.275 304.800 69.850 14.29 303.21 171.45 277.8 188.9 6.4 25.9 3730.0 1910.0
6.6250 12.0000 2.7500 0.562 11.938 6.750 10.94 7.44 0.25 57.0 839000 429000 950
W-3218-B 177.800 368.300 82.550 17.46 366.71 180.98 336.6 203.2 6.1 49.4 6270.0 2940.0
7.0000 14.5000 3.2500 0.688 14.438 7.125 13.25 8.00 0.24 109.0 1410000 660000 790
F-3094-C 228.575 431.749 88.900 15.88 430.99 231.78 396.9 257.2 5.1 71.7 7120.0 3420.0
8.9990 16.9980 3.5000 0.625 16.968 9.125 15.62 10.12 0.20 158.0 1600000 769000 670
I-2077-C 253.975 508.000 95.250 19.05 507.19 256.38 468.3 282.6 6.4 110.2 10000.0 4530.0
9.9990 20.0000 3.7500 0.750 19.968 10.094 18.44 11.12 0.25 243.0 2260000 1020000 570
R-2927-C 254.000 508.000 107.950 21.43 506.41 257.18 466.7 285.8 4.8 123.4 12100.0 5550.0
10.0000 20.0000 4.2500 0.844 19.938 10.125 18.38 11.25 0.19 272.0 2720000 1250000 570
G-3224-C 256.540 546.100 165.100 34.92 542.92 258.76 515.9 301.6 6.1 227.2 14900.0 7900.0
10.1000 21.5000 6.5000 1.375 21.375 10.188 20.31 11.88 0.24 501.0 3350000 1780000 530
S-4077-C 259.999 479.948 132.080 26.99 478.36 263.17 427 300 4.8 126.5 8980.0 4720.0
10.2362 18.8956 5.2000 1.062 18.833 10.361 16.81 11.81 0.19 279.0 2020000 1060000 610
C-8091-C 279.400 603.250 136.525 30.16 601.66 282.58 552.4 317.5 4.8 230.4 1770.0 7890.0
11.0000 23.7500 5.3750 1.188 23.688 11.125 21.75 12.50 0.19 508.0 3980000 1770000 480
G-3272-C 304.775 609.600 114.300 28.58 606.81 307.18 565.2 342.9 6.4 190.9 17800.0 7380.0
11.9990 24.0000 4.5000 1.125 23.890 12.094 22.25 13.50 0.25 421.0 3990000 1660000 480
E-1994-C 304.800 673.100 171.450 37.31 671.51 307.98 608 352.4 7.6 347.8 22700.0 11000.0
12.0000 26.5000 6.7500 1.469 26.438 12.125 23.94 13.88 0.30 767.0 5100000 2470000 430
F-3090-A 304.800 736.600 279.400 44.45 735.01 307.98 614.4 385.8 9.1 732 28000.0 17100.0
12.0000 29.0000 11.0000 1.750 28.938 12.125 24.19 15.19 0.36 1614.0 6300000 3850000 400
I-2060-C 368.541 609.156 120.650 25.40 604.84 371.48 565.2 401.6 9.7 176 11800.0 5840.0
14.5095 23.9825 4.7500 1.000 23.812 14.625 22.25 15.81 0.38 388.0 2640000 1310000 480
B-8350-C 406.400 711.200 167.084 36.91 709.61 409.58 654 450.8 9.1 356.5 19900.0 10300.0
16.0000 28.0000 6.5781 1.453 27.938 16.125 25.75 17.75 0.36 786.0 4480000 2310000 410
F-3163-C 406.400 712.394 146.050 30.96 711.28 409.58 650.9 455.6 7.6 303.4 19300.0 9190.0
16.0000 28.0470 5.7500 1.219 28.003 16.125 25.62 17.94 0.30 669.0 4350000 2070000 410
F-3131-G 431.800 863.600 228.600 44.45 862.01 434.98 787.4 489 10.2 774.6 37700.0 18800.0
17.0000 34.0000 9.0000 1.750 33.938 17.125 31.00 19.25 0.40 1708.0 8480000 4230000 340
A-6096-C 508.000 990.600 196.850 67.47 990.60 508.58 927.1 563.6 12.7 882.5 41500.0 16700.0
20.0000 39.0000 7.7500 2.656 39.000 20.062 36.50 22.19 0.50 1946.0 9320000 3760000 290
F-3093-A 558.800 1066.800 285.750 57.15 1065.21 561.98 952.5 639.8 10.2 1401.4 49400.0 28000.0
22.0000 42.0000 11.2500 2.250 41.938 22.125 37.50 25.19 0.40 3090.0 11100000 6300000 270
F-3172-C 711.200 965.200 127.000 30.16 963.61 714.38 917.6 762 4.8 354.2 19600.0 8670.0
28.0000 38.0000 5.0000 1.188 37.938 28.125 36.12 30.00 0.19 781.0 4400000 1950000 300
H-2054-G 711.200 990.600 190.500 44.45 989.01 712.79 936.6 755.6 10.2 572.3 28000.0 14200.0
28.0000 39.0000 7.5000 1.750 38.938 28.062 36.88 29.75 0.40 1262.0 6300000 3200000 290
D-2864-C 825.424 1168.400 127.000 31.75 1168.40 825.50 1130.3 860.4 14.2 549.7 44100.0 15600.0
32.4970 46.0000 5.0000 1.250 46.000 32.500 44.50 33.88 0.56 1212.0 9920000 3500000 250
F-3067-C 1219.998 1574.869 177.800 44.45 1575 1219.99 1498.6 1266.8 6.4 1173.2 49900.0 21900.0
48.0314 62.0027 7.0000 1.750 62.008 48.031 59.00 49.88 0.25 2587.0 11200000 4930000 180
A
Caption:
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
TIMKEN PRODUCTS CATALOG B457
•
Caption:
ROLLER BEARINGS
Bearings Type TTVS
TAPERED ROLLER THRUST BEARINGS TYPE TTVS
• Same basic roller and raceway design as the TTVF except that the lower washer is two pieces to permit self-alignment under conditions of initial misalignment.
D1
H
d
rs MAX.
d1
E
A
B
T1
T
rs MAX.
D
DIMENSIONS – LOAD RATINGS
Washers Shoulder Diameter
Load Rating
Approx.
Bearing Bore O.D. Height Thickness Small Large Shaft Housing Fillet(1) Wt. Static Dynamic Limiting Number d D T T1 Diameter Bore H E Radius Load Load Speed
O.D. I.D. rs Rating Rating (for Oil D1 d1 (Min.) (Max.) (Max.) Coa Ct Bath Only)
mm mm mm mm mm mm mm mm mm kg kN kN RPM in. in. in. in. in. in. in. in. in. lbs. lbs. lbs.
B-7976-C 184.15 406.4 203.2 66.68 404.81 187.32 346.1 228.6 6.1 157.4 7650.0 4540.0
7.2500 16.0000 8.0000 2.625 15.938 7.375 13.62 9.00 0.24 347.0 1720000 1020000 720
B-8824-C 199.374 399.948 121.841 36.4 396.88 203.2 358.8 240.5 4.1 86.2 7020.0 3590.0
7.8730 15.7460 4.7969 1.433 15.625 8.000 14.12 9.47 0.16 190.0 1580000 807000 730
E-2004-C 228.6 482.549 158.75 44.91 479.55 231.78 419.1 282.6 4.8 170.1 10900.0 5870.0
9.0000 18.9980 6.2500 1.768 18.880 9.125 16.50 11.12 0.19 375.0 2440000 1320000 600
H-1685-C 241.3 488.899 152.4 57.15 482.6 242.09 431.8 279.4 6.1 162.8 9940.0 4980.0
9.5000 19.2480 6.0000 2.250 19.000 9.531 17.00 11.00 0.24 359.0 2240000 1120000 600
W-3120-C 253.975 508 215.9 61.91 504.82 285.75 425.4 317.5 10.2 250.8 9770.0 6020.0
9.9990 20.0000 8.5000 2.437 19.875 11.250 16.75 12.50 0.40 553.0 2200000 1350000 580
P-1739-C 304.8 609.6 215.9 61.91 608.01 307.98 536.6 349.2 7.6 359.6 17800.0 10000.0
12.0000 24.0000 8.5000 2.437 23.938 12.125 21.12 13.75 0.30 793.0 4010000 2260000 480
N-2827-G 355.6 660.4 254 76.2 657.22 358.78 577.8 412.8 10.2 483 18600.0 11100.0
14.0000 26.0000 10.0000 3.000 25.875 14.125 22.75 16.25 0.40 1065.0 4180000 2490000 440
B-8424-C 406.4 869.95 241.3 82.55 887.41 438.15 803.3 463.6 16.5 858 39000.0 17700.0
16.0000 34.2500 9.5000 3.250 34.938 17.250 31.62 18.25 0.65 1892.0 8770000 3980000 330
(1) Maximum shaft or housing ?llet radius that bearing corners will clear.
A
Caption:
•
B458 TIMKEN PRODUCTS CATALOG
Thrust Bearings
Thrust
D1
TAPERED ROLLER THRUST BEARINGS TYPE TTSX
• A full roller complement design without a conventional bore.
• Supplied with center inserts for attachment purposes as well as for lifting.
• Offers the highest capacity but at a somewhat reduced speed capability, as compared with other V-Flat types.
Tp Basic
Screw Overall Height Spherical Washer max. Top Hsg. Hsg. Taper Static Extension Height Radius Thickness Washer Shldr. Shldr. Width Depth Pipe Thrust Bearing Dia. min. O.D. O.D. Dia. Dia. Plug Capacity Number
H D T T2 RS T1 rs D1 E E1 U V Tb Th Thread BSTC
inch inch inch inch inch inch inch inch inch inch inch inch inch inch inch lbs.
58 TTSX 908
5.000 5.875 2.164 1.875 18.000 0.500 1/16 5.782 5 3/8 2 0.187 0.046 1/2-13 3/8-16 3/8 299000
68 TTSX 910
6.000 6.875 2.417 2.062 18.000 0.500 1/16 6.782 6 3/8 2 7/8 0.187 0.046 1/2-13 3/8-16 3/8 400000
80 TTSX 914
7.000 8.000 2.977 2.562 20.000 0.625 1/16 7.907 7 3/8 2 7/8 0.250 0.046 1/2-13 3/8-16 3/8 565000 105 TTSX 918 9.000 10.500 3.717 3.187 24.000 0.750 1/16 10.407 9 3/8 3 1/8 0.312 0.078 3/4-10 1/2-13 3/4 985000 126 TTSX 922 11.000 12.625 4.369 3.750 30.000 0.875 1/16 12.532 11 1/2 3 5/8 0.406 0.094 3/4-10 1/2-13 3/4 1515000 202 TTSX 942 EE2000 15.875 20.250 7.430 6.125 25.000 1.375 1/16 20.532 19 5 – – 1 1/4-7 1 - 8 1 1/4 4190000 190 TTSX 940 16.500 19.000 5.730 5.125 75.000 1.500 1/16 18.906 18 1/4 7 3/16 0.531 0.125 1 1/4-7 1 - 8 1 1/4 3460000 190 TTSX 940 OA617 16.500 19.000 6.015 5.125 42.000 1.500 1/16 18.905 18 1/4 5 3/16 0.531 0.125 1 1/4-7 1 - 8 1 1/4 3620000 190 TTSX 938 BO563 17.000 19.250 6.717 5.750 42.000 1.375 1/8 19.407 17 5/8 4 5/8 – – 1 1/4-7 1 - 8 1 1/4 3680000 195 TTSX 938 OD452 17.000 19.500 6.635 5.750 46.500 1.375 1/8 12.407 17 5/8 4 5/8 0.531 0.125 1 1/4-7 1 - 8 1 1/4 3680000 210 TTSX 944 18.000 21.000 7.000 6.375 78.000 1.250 1/16 20.906 19 1/2 5 0.375 0.375 1 1/4-7 1 - 8 1 1/4 4232000 210 TTSX 944 BA1479 18.000 21.000 7.023 – 78.000 1.250 – 21.000 19 1/2 5 – – 1 1/4-7 1 - 8 1 1/4 4232000 218 TTSX 946 19.000 21.875 7.514 6.500 50.000 1.500 1/8 21.782 19 7/8 6 0.531 0.125 1 1/4-7 1 - 8 1 1/4 4550000 228 TTSX 950 20.000 22.875 7.629 6.625 56.000 1.500 1/8 22.782 20 3/4 5 1/4 0.531 0.125 1 1/4-7 1 - 8 1 1/4 5130000 228 TTSX 950 AO2017 20.000 22.875 7.629 6.625 56.000 1.500 1/8 22.782 20 3/4 5 1/4 0.531 0.125 1 1/4-7 1 - 8 1 1/4 5130000
H
Tp
U
rs MAX
V
Tb
T1
Th
T2
T
A
B
A
Rs
E1
E
D
Groove Eyebolt Threads
148 TTSX 926 13.000 14.875 5.079 4.375 36.000 1.000 1/16 14.782 13 5/8 4 5/8 0.406 0.094 1 1/4-7 1/2-13 1 1/4 2050000 172 TTSX 934 OG778 13.500 17.252 6.495 5.500 33.000 1.250 5/32 17.152 15 5/8 4 9/16 0.531 0.125 1 1/4-7 1 - 8 1 1/4 2815000 161 TTSX 930 14.000 16.125 5.542 4.812 40.000 1.125 1/8 16.032 14 5/8 4 9/16 0.406 0.094 1 1/4-7 1/2-13 1 1/4 2430000 161 TTSX 930 AA678 14.000 16.125 6.730 5.616 54.000 1.750 1/16 16.032 14 5/8 4 9/16 – – 1 1/4-7 1 - 8 1 1/4 2430000 172 TTSX 934 15.000 17.250 5.932 5.125 40.000 1.250 1/8 17.157 15 5/8 4 9/16 0.531 0.125 1 1/4-7 1 - 8 1 1/4 2800000
195 TTSX 938 17.000 19.500 6.717 5.750 42.000 1.375 1/8 19.407 17 5/8 4 5/8 0.531 0.125 1 1/4-7 1 - 8 1 1/4 3680000 195 TTSX 938 DO574 17.000 19.560 6.717 5.750 42.000 1.375 1/8 19.407 17 5/8 4 5/8 – – 1 1/4-7 1 - 8 1 1/4 3680000 206TTSX 942 18.000 20.625 6.920 6.000 50.000 1.375 1/8 20.532 19 5 1/8 0.531 0.125 1 1/4-7 1 - 8 1 1/4 4190000 206 TTSX 942 AB551 18.000 20.625 7.937 6.878 42.000 2.238 1/8 20.532 19 5 0.531 0.125 1 1/4-7 1 - 8 1 1/4 4190000 210 TTSX 944 AO574 18.000 21.000 7.000 6.375 78.000 1.250 – 20.906 19 1/2 5 – – 1 1/4-7 1 - 8 1 1/4 4232000
228 TTSX 950 OA452 20.000 22.875 7.708 6.625 51.500 1.500 1/8 22.782 20 3/4 5 1/4 0.531 0.125 1 1/4-7 1 - 8 1 1/4 5130000 240 TTSX 954 OC1185 21.000 24.000 8.032 7.000 60.000 1.500 1/8 23.907 22 4 5/8 0.531 0.125 1 1/4-7 1 - 8 1 1/4 5700000 240 TTSX 954 21.000 24.000 8.032 7.000 60.000 1.500 1/8 23.907 22 5 5/8 0.531 0.125 1 1/4-7 1 - 8 1 1/4 5700000 252 TTSX 958 00149 22.000 25.250 8.373 7.250 60.000 1.500 1/8 25.157 23 1/8 5 3/8 0.531 0.125 1 1/4-7 1 - 8 1 1/4 6290000 252 TTSX 958 22.000 25.250 8.373 7.250 60.000 1.500 1/8 25.157 23 1/8 5 3/8 0.531 0.125 1 1/4-7 1 - 8 1 1/4 6290000
Caption:
TIMKEN PRODUCTS CATALOG B459
•
ROLLER BEARINGS
Caption:
TAPERED ROLLER THRUST BEARINGS TYPE TTSV
D1
H
• Designed with a full complement of controlled contour rollers without a conventional bore.
• Supplied with center inserts for attachment purposes as well as for lifting.
• Offers the highest capacity but at a somewhat reduced speed capability, as compared with other V-Flat types.
Tp
Tb
Rs
U
T1
T
A
B
E1
Th
rs MAX
V
E
D
Tp Basic
Screw Height Spherical Washer max. Top Hsg. Hsg. Taper Static Extension Radius Thickness Washer Shldr. Shldr. Width Depth Pipe Thrust Bearing
Groove Eyebolt Threads
Dia. min. O.D. O.D. Dia. Dia. Plug Capacity Number
H D T RS T1 rs D1 E E1 U V Tb Th Thread BSTC
inch inch inch inch inch inch inch inch inch inch inch inch inch inch lbs.
58 TTSV 908
5.000 5.875 1.875 9.000 0.500 1/16 5.782 5 3/8 2 0.187 0.046 5/8-11 3/8-16 – 299000
80 TTSV 914 AA508
5.500 8.000 2.563 24.000 0.625 – 7.907 7 3/8 2 7/8 – – 5/8-11 3/8-16 – 565000
68 TTSV 910
6.000 6.875 2.062 9.000 0.500 1/16 6.782 6 3/8 2 7/8 0.187 0.046 5/8-11 3/8-16 – 400000
80 TTSV 914
7.000 8.000 2.562 10.000 0.625 1/16 7.907 7 3/8 2 7/8 0.250 0.046 5/8-11 3/8-16 – 565000
105 TTSV 918
9.000 10.500 3.187 12.000 0.750 1/16 10.407 9 3/8 3 3/8 0.312 0.078 3/4-10 1/2-13 – 985000
105 TTSV 918 OC1150
9.000 10.500 3.187 14.000 0.750 1/16 10.407 9 3/8 3 1/8 0.312 0.078 3/4-10 1/2-13 – 985000
126 TTSV 922
11.000 12.625 3.750 15.000 0.875 1/16 12.532 11 1/2 3 5/8 0.406 0.094 3/4-10 1/2-13 – 1515000
148 TTSV 926
13.000 14.875 4.375 18.000 1.000 1/16 14.782 13 5/8 4 5/8 0.406 0.094 3/4-10 1/2-13 3/4 2050000
148 TTSV 926 AO529
13.000 14.875 4.375 18.000 1.000 1/16 14.782 13 5/8 4 5/8 0.406 0.094 3/4-10 1/2-13 – 2050000
161 TTSV 930 OA534
13.000 16.125 5.500 20.000 1.125 1/8 16.032 14 5/8 4 9/16 0.406 0.094 3/4-10 1/2-13 3/4 2430000
161 TTSV 930
14.000 16.125 4.812 20.000 1.125 1/8 16.032 14 5/8 4 9/16 0.406 0.094 3/4-10 1/2-13 3/4 2430000
172 TTSV 934
15.000 17.250 5.125 20.000 1.250 1/8 17.157 15 5/8 4 9/16 0.531 0.125 1 1/4-7 1 - 8 1 1/4 2800000
172 TTSV 934 BA528
15.000 17.250 5.875 50.000 2.000 – 17.157 15 5/8 4 9/16 – – 1 1/4-7 1 - 8 1 1/4 2800000
195 TTSV 938 OA452
17.000 19.500 5.750 25.000 1.375 1/8 19.407 17 5/8 4 5/8 0.531 0.125 1 1/4-7 1 - 8 1 1/4 3680000
195 TTSV 938
17.000 19.500 5.750 22.000 1.375 1/8 19.407 17 5/8 4 5/8 0.531 0.125 1 1/4-7 1 - 8 1 1/4 3680000
195 TTSV 938 OC902
17.000 19.500 5.750 25.000 1.375 1/8 19.250 17 5/8 4 5/8 0.531 0.125 1 1/4-7 1 - 8 1 1/4 3610000
195 TTSV 938 LE1722
17.000 19.500 5.750 36.000 1.375 1/4 19.407 17 5/8 4 5/8 0.953 0.130 1 1/4-7 1 - 8 1 1/4 3680000
195 TTSV 938 DB508
17.000 19.500 5.750 50.000 1.383 – 19.407 17 5/8 4 5/8 – – 1 1/4-7 1 - 8 1 1/4 3680000
206 TTSV 942
18.000 20.625 6.000 25.000 1.375 1/8 20.532 19 5 1/8 0.531 0.125 1 1/4-7 1 - 8 1 1/4 4190000
210 TTSV 944 CA1481
18.000 21.000 7.000 50.000 1.125 – 21.000 19 1/2 5 – – 1 1/4-7 1 - 8 1 1/4 4232000
210 TTSV 944 DA 1708
18.000 21.000 7.500 50.000 1.750 – 21.000 19 1/2 5 – – 1 1/4-7 1 - 8 1 1/4 4232000
212 TTSV 942 EA1740
18.000 21.250 6.250 25.000 1.625 7/16 21.250 19 5 0.531 0.125 1 1/4-7 1 - 8 1 1/4 4190000
218 TTSV 946
19.000 21.875 6.500 25.000 1.500 1/8 21.782 19 7/8 6 0.531 0.125 1 1/4-7 1 - 8 1 1/4 4550000
228 TTSV 950
20.000 22.875 6.625 28.000 1.500 1/8 22.782 20 3/4 5 1/4 0.531 0.125 1 1/4-7 1 - 8 1 1/4 5130000
240 TTSV 954
21.000 24.000 7.000 30.000 1.500 1/8 23.907 22 5 3/8 0.531 0.125 1 1/4-7 1 - 8 1 1/4 5700000
252 TTSV 958
22.000 25.250 7.250 30.000 1.500 1/8 25.157 23 1/8 5 3/8 0.531 0.125 1 1/4-7 1 - 8 1 1/4 6290000
Caption:
A
•
B460 TIMKEN PRODUCTS CATALOG
Thrust Bearings
Thrust
TAPERED ROLLER THRUST BEARINGS TYPE TTSP
Caption:
• The types TTSP and TTSPS (not shown) thrust bearings are made up of two tapered thrust races, rollers, cage and outside retainer which holds the components together during shipping and installation.
• These bearings are employed extensively in the steering pivot positions of automotive and industrial applications.
T63
A
B
Caption:
Shaft
Bearing Number
Fillet
Bore Outside Width Radius
Remarks
No Oil Holes Oil Holes Fig
Diameter
Mass
In Retainer In Retainer No. d D T R
mm mm mm mm kg in. in. in. in. lbs.
T63W 1 16.129 41.275 12.700 0.8 0.08
1 0.6350 1.6250 0.5000 0.03 0.18
T76
T76W 1 19.304 41.275 13.487 0.8 0.08
1 0.7600 1.6250 0.5310 0.03 0.18
T77
T77W 1 19.304 41.275 12.700 0.8 0.07
1 0.7600 1.6250 0.5000 0.03 0.15
T82
T82W 1 20.879 41.275 13.487 0.8 0.07
1 0.8220 1.6250 0.5310 0.03 0.15
T86
1 20.257 39.688 14.288 1.3 0.07
1 0.7975 1.5625 0.5625 0.05 0.15
T88
T88W 1 22.479 48.021 15.088 0.8 0.11
1 0.8850 1.8906 0.5940 0.03 0.24
T89
1 22.479 48.021 15.875 0.8 0.12
1 0.8850 1.8906 0.6250 0.03 0.26
*T92
2 23.825 44.958 13.487 0.8 – T92 HAS 2 BORES, OTHER BORE =24.054 mm
2 0.9380 1.7700 0.5310 0.03 –
(.9470”), R = .08 mm (.03”).
T93
2 24.054 44.958 13.487 0.8 0.09
2 0.9470 1.7700 0.5310 0.03 0.20
T94
T94W 1 24.054 48.021 15.088 0.8 0.11
1 0.9470 1.8906 0.5940 0.03 0.24
T95
T95W 1 24.130 50.800 15.875 0.8 0.13
1 0.9500 2.0000 0.6250 0.03 0.29
T101
T101W 1 25.654 50.800 15.875 0.8 0.13
1 1.0100 2.0000 0.6250 0.03 0.29
*T101X
1 25.146 50.800 15.875 0.8 – T101X HAS 2 BORES, OTHER BORE =24.654 mm
1 0.9900 2.0000 0.6250 0.03 –
(1.0100”).
*T102
1 25.654 50.800 16.916 0.8 – T102 HAS EXTENDED RETAINER, RETAINER “C”
1 1.0100 2.0000 0.6660 0.03 –
DIMENSION - 20.384 mm (.8025”). EXTENSION INSIDE DIAMETER = 35.052 mm (1.3800”)
T104
T104W 1 26.289 50.800 15.875 0.8 0.13
1 1.0350 2.0000 0.6250 0.03 0.29
*T105
Caption:
A
1 25.654 50.800 15.875 0.8 – T105 HAS 2 BORES, OTHER BORE = 27.299 mm
1 1.0100 2.0000 0.6250 0.03 –
(1.0720”).
T107
T107W 1 27.299 50.800 15.875 0.8 0.12
1 1.0720 2.0000 0.6250 0.03 0.26
T110
T110W 1 28.829 53.188 15.875 0.8 0.14
1 1.1350 2.0940 0.6250 0.03 0.31
T113
T113W 1 28.829 55.562 15.875 0.8 0.15
1 1.1350 2.1875 0.6250 0.03 0.33
* See remarks column.
TIMKEN PRODUCTS CATALOG B461
•
Caption:
ROLLER BEARINGS
TAPERED ROLLER THRUST BEARINGS TYPE TTSP – continued
Shaft
Bearing Number
Fillet
Bore Outside Width Radius
Remarks
No Oil Holes Oil Holes Fig
Diameter
Mass
In Retainer In Retainer No. d D T R
A
B
mm mm mm mm kg in. in. in. in. lbs.
*T114
*T114W 1 25.654 55.562 15.875 0.8 –
T114 AND T114W HAVE 2 BORES, OTHER
1 1.0100 2.1875 0.6250 0.03 –
BORE = 28.829 mm (1.1350”).
*T114X
2 28.829 50.800 15.875 0.8 –
T114X HAS 2 CAGES AND 2 BORES, OTHER
2 1.1350 2.0000 0.6250 0.03 –
BORE = 29.261 mm (1.1520”).
T119
T119W 1 30.416 55.562 15.875 0.8 0.15
1 1.1975 2.1875 0.6250 0.03 0.33
T120
2 30.416 54.745 11.430 0.8 0.11
2 1.1975 2.1553 0.4500 0.03 0.24
T121
1 30.716 55.562 15.875 0.8 0.16
1 1.2093 2.1875 0.6250 0.03 0.35
T126
T126W 1 32.004 55.562 15.875 0.8 0.14
1 1.2600 2.1875 0.6250 0.03 0.31
*T126A T126AW 1 32.004 55.562 15.875 0.8 0.14
T126A - 2 CAGES
1 1.2600 2.1875 0.6250 0.03 0.31
T139
T139W 1 35.179 58.738 15.875 0.8 0.15
1 1.3850 2.3125 0.6250 0.03 0.33
*T139KP
1 35.179 58.738 15.875 0.8 0.15
RACES ARE CADMIUM PLATED.
1 1.3850 2.3125 0.6250 0.03 0.33
T142
T142W 1 35.179 62.708 19.431 0.8 0.23
1 1.3850 2.4688 0.7650 0.03 0.51
T149
T149W 1 38.303 65.883 19.431 0.8 0.24
1 1.5080 2.5938 0.7650 0.03 0.53
T158
1 40.234 65.883 19.431 0.8 0.23
1 1.5840 2.5938 0.7650 0.03 0.51
T199
T199W 1 51.054 74.612 15.875 0.8 0.20
1 2.0100 2.9375 0.6250 0.03 0.44
T309
T309W 1 78.583 102.395 15.875 0.8 0.29
1 3.0938 4.0313 0.6250 0.03 0.64
T387
T387W 1 96.425 127.000 17.463 0.8 0.50
1 3.8750 5.0000 0.7650 0.03 1.10
T484
1 123.012 152.400 17.463 0.8 0.63
1 4.8430 6.0000 0.6875 0.03 1.39
T581
1 147.638 177.800 17.463 0.8 0.89
1 5.8125 7.0000 0.6875 0.03 1.96
T1760
3 44.623 76.200 10.922 0.8 0.18
3 1.7568 3.0000 0.4300 0.03 0.4
* See remarks column.
Caption:
A
•
B462 TIMKEN PRODUCTS CATALOG
Thrust Bearings
Thrust
Caption:
TAPERED ROLLER THRUST BEARINGS TYPE TTC-TTCS
Caption:
• The types TTC, TTCS and TTCL (not shown) thrust bearings consist of two tapered thrust races, rollers and an outside retainer and are cageless.
• The outside retainer holds the assembly together for shipping and installation.
• These thrust bearings are speci?cally designed for oscillating applications.
• These types are identical with the exception of the retainer construction.
A
B
TTC
TTCS
Caption:
Shaft
Bearing Number
Fillet
Bore Outside Width Radius
Remarks
No Oil Holes Oil Holes Fig
Diameter
Mass
In Retainer In Retainer No. d D T R
mm mm mm mm kg in. in. in. in. lbs.
T127
T127W 1 32.004 66.675 19.446 0.8 0.31
1 1.2600 2.6250 0.7656 0.03 0.68
T128
2 32.004 66.675 18.654 0.8 0.29
2 1.2600 2.6250 0.7344 0.03 0.64
T130
1 27.102 66.675 19.446 0.8 0.34
1 1.0670 2.6250 0.7656 0.03 0.75
T136
2 35.179 66.675 18.654 0.8 0.28
2 1.3850 2.6250 0.7344 0.03 0.62
T138
T138W 1 35.179 66.675 19.446 0.8 0.30
1 1.3850 2.6250 0.7656 0.03 0.66
*T138XS
Caption:
A
SPCL 35.179 66.675 19.446 0.8 – T138XS HAS 2 BORES, OTHER BORE = 35.387 mm
1.3850 2.6250 0.7656 0.03 –
(1.3972”)
T144
T144W 1 36.754 66.675 19.446 1.5 0.29
1 1.4470 2.6250 0.7656 0.06 0.64
*T144XA
SPCL 36.754 66.675 19.446 1.5 – T144XA HAS 2 BORES, OTHER BORE = 37.137 mm
1.4470 2.6250 0.7656 0.06 –
(1.4621”)
T151
T151W 1 38.354 72.619 21.433 0.8 0.37
1 1.5100 2.8590 0.8438 0.03 0.82
T151X
1 38.354 69.444 20.726 0.8 0.37
1 1.5100 2.7340 0.8160 0.03 0.82
* See remarks column.
TIMKEN PRODUCTS CATALOG B463
•
Caption:
ROLLER BEARINGS
TAPERED ROLLER THRUST BEARINGS TYPE TTC-TTCS – continued
Caption:
A
B
Shaft
Bearing Number
Fillet
Bore Outside Width Radius
Remarks
No Oil Holes Oil Holes Fig
Diameter
Mass
In Retainer In Retainer No. d D T R
mm mm mm mm kg in. in. in. in. lbs.
T152
2 38.354 72.619 20.638 0.8 0.35
2 1.5100 2.8590 0.8125 0.03 0.77
T157
T157W 1 39.954 72.619 21.433 0.8 0.37
1 1.5730 2.8590 0.8438 0.03 0.82
T163
T163W 1 41.529 72.619 21.433 0.8 0.35
1 1.6350 2.8590 0.8438 0.03 0.77
T163X
T163XW 1 41.529 72.619 21.433 2.0 0.35
1 1.6350 2.8590 0.8438 0.80 0.77
T169
T169W 1 43.104 82.956 23.812 0.8 0.55
1 1.6970 3.2660 0.9375 0.03 1.21
T176
T176W 1 44.704 82.956 23.812 0.8 0.54
1 1.7600 3.2660 0.9375 0.03 1.19
T177
1 45.000 73.000 20.000 0.8 0.32
1 1.7717 2.8740 0.7874 0.03 0.71
T177A
1 45.484 73.000 20.000 0.8 0.33
1 1.7907 2.8740 0.7874 0.03 0.73
*T177XA
SPCL 45.000 73.127 20.000 0.8 – T177XA HAS 2 BORES, OTHER BORE = 45.484mm
1.7717 2.8790 0.7874 0.03 –
(1.7907”)
T177S
5 45.000 74.500 20.221 0.8 0.35
5 1.7717 2.9331 0.7961 0.03 0.77
T178
A
1 40.401 73.000 19.000 0.8 –
1 1.5906 2.8740 0.7480 0.03 –
T182
Caption:
T182W 1 46.279 82.956 23.812 0.8 0.52
1 1.8220 3.2660 0.9375 0.03 1.15
T188
T188W 1 47.879 82.956 23.812 0.8 0.52
1 1.8850 3.2660 0.9375 0.03 1.15
T188X
4 47.879 83.774 24.130 2.3 –
4 1.8850 3.2970 0.9500 0.09 –
T189
T189W 2 47.879 82.956 23.020 0.8 0.50
2 1.8850 3.2660 0.9063 0.03 1.10
* See remarks column.
•
B464 TIMKEN PRODUCTS CATALOG
Thrust Bearings
Thrust
Shaft
Bearing Number
Fillet
Bore Outside Width Radius
Remarks
No Oil Holes Oil Holes Fig
Diameter
Mass
In Retainer In Retainer No. d D T R
mm mm mm mm kg in. in. in. in. lbs.
T193
T193W 2 49.454 93.269 26.187 0.8 0.80
2 1.9470 3.6720 1.0310 0.03 1.76
T194
A
B
T194W 1 49.454 93.269 26.975 0.8 0.81
1 1.9470 3.6720 1.0620 0.03 1.79
T201
T201W 2 51.054 93.269 26.187 3.3 0.77
2 2.0100 3.6720 1.0310 0.13 1.70
T202
T202W 1 51.054 93.269 26.975 3.3 0.80
1 2.0100 3.6720 1.0620 0.13 1.76
T208
T208W 1 52.629 93.269 26.975 0.8 0.79
1 2.0720 3.6720 1.0620 0.03 1.74
T209
T209W 2 52.629 93.269 26.187 0.8 0.75
2 2.0720 3.6720 1.0310 0.03 1.65
T251
T251W 1 63.754 111.125 26.988 0.8 1.07
1 2.5100 4.3750 1.0625 0.03 2.36
T252
T252W 2 63.754 111.125 25.796 0.8 1.07
2 2.5100 4.3750 1.0156 0.03 2.23
T301
T301W 2 76.454 133.350 33.338 2.3 1.87
2 3.0100 5.2500 1.3125 0.09 4.12
T301X 2 76.454 133.350 33.338 2.3 –
2 3.0100 5.2500 1.3125 0.09 –
T302
T302W 1 76.454 133.350 34.925 2.3 1.99
1 3.0100 5.2500 1.3750 0.09 4.39
T350
2 88.900 133.350 33.335 2.8 1.41
2 3.5000 5.2500 1.3124 0.11 3.11
T402
T402W 2 102.108 179.619 44.450 1.5 4.84
2 4.0200 7.0716 1.7500 0.06 10.67
T600
T600W 1 152.400 241.300 76.200 3.3 14.10
1 8.0000 9.5000 3.0000 0.13 31.09
T1260
T1260W 1 32.004 55.562 15.875 0.8 0.17
1 1.2600 2.1875 0.6250 0.03 0.37
*T1380
SPCL 35.179 59.400 15.875 0.8 0.35
2 PIECE SEAL
SPCL 1.3850 2.3386 0.6250 0.03 0.77
T1921
1 46.279 80.010 15.977 0.8 0.34
1 1.8220 3.1500 0.6290 0.03 0.75
T4020
2 102.108 179.619 31.750 1.5 3.7
2 4.0200 7.0716 1.2500 0.06 8.16
* See remarks column.
Caption:
A
TIMKEN PRODUCTS CATALOG B465
•
ROLLER BEARINGS
Caption:
NOTES
A
B
A
Caption:
•
B466 TIMKEN PRODUCTS CATALOG
AUXILIARY PARTS
Thrust Bearings
CUP SHIMS
STANDARD METAL SHIMS FOR CUP ADJUSTMENT BEARINGS
Caption:
and 0.51 mm (0.020 in.) thick.
Shims 0.13 mm (0.005 in.), 0.18 mm (0.007 in.) Without carrier
A
B
With carrier
Carrier section should be equal to average cup wall section.
Cup Shims part number identi?es the following:
Suggested shim sets consist of three
0.13 mm (0.005 in.), three 0.18 mm (0.007 in.), and one 0.51 mm (0.020 in.) thick shims. When ordering, specify the exact quantity for each part number. Shims shown in this table are made
from aluminum, brass, or steel shim stock.
Shim
size thickness(inches)
K2
00 00 example
K2 06 05 covers number 6 shim 0.13 mm (0.005 in.) thick K2 06 07 covers number 6 shim 0.18 mm (0.007 in.) thick K2 06 20 covers number 6 shim 0.51 mm (0.020 in.) thick K21505 K21507 K21520 4 9.7 96.0 114.3 10.4 9.7 4.8
0.38 3.78 4.50 0.41 0.38 0.19 K21605 K21607 K21620 4 12.7 102.4 127.0 13.5 12.7 6.4
0.50 4.03 5.00 0.53 0.50 0.25 K21705 K21707 K21720 4 12.7 108.7 133.4 13.5 12.7 6.4
0.50 4.28 5.25 0.53 0.50 0.25 K21805 K21807 K21820 4 12.7 115.1 139.7 13.5 12.7 6.4
0.50 4.53 5.50 0.53 0.50 0.25 K21905 K21907 K21920 6 12.7 121.4 146.0 13.5 12.7 6.4
0.50 4.78 5.75 0.53 0.50 0.25 K22005 K22007 K22020 6 12.7 127.8 152.4 13.5 12.7 6.4
0.50 5.03 6.00 0.53 0.50 0.25 K22205 K22207 K22220 6 12.7 140.5 165.1 13.5 12.7 6.4
0.50 5.53 6.50 0.53 0.50 0.25 K22405 K22407 K22420 6 12.7 153.2 177.8 13.5 12.7 6.4
0.50 6.03 7.00 0.53 0.50 0.25
DIMENSIONS ARE IN MILLIMETERS / INCHES
DIMENSIONS ARE IN MILLIMETERS / INCHES
Shim Part Numbers Cap Screws
0.13 0.18 0.51
0.005 0.007 0.020 No. Size D1 D2 D3 ra rb
Thick Thick Thick
Shim Part Numbers Cap Screws
0.13 0.18 0.51
0.005 0.007 0.020 No. Size D1 D2 D3 ra rb
Thick Thick Thick
K20605 K20607 K20620 4 6.4 35.8 47.8 7.1 6.4 3.0
0.25 1.41 1.88 0.28 0.25 0.12 K20705 K20707 K20720 4 6.4 45.2 57.2 7.1 6.4 3.0
0.25 1.78 2.25 0.28 0.25 0.12 K20805 K20807 K20820 4 9.7 51.6 69.8 10.4 9.7 4.8
0.38 2.03 2.75 0.41 0.38 0.19 K20905 K20907 K20920 4 9.7 59.4 76.2 10.4 9.7 4.8
0.38 2.34 3.00 0.41 0.38 0.19 K21005 K21007 K21020 4 9.7 65.8 82.6 10.4 9.7 4.8
0.38 2.59 3.25 0.41 0.38 0.19 K21105 K21107 K21120 4 9.7 70.6 88.9 10.4 9.7 4.8
0.38 2.78 3.50 0.41 0.38 0.19 K21205 K21207 K21220 4 9.7 77.0 95.2 10.4 9.7 4.8
0.38 3.03 3.75 0.41 0.38 0.19 K21405 K21407 K21420 4 9.7 89.7 108.0 10.4 9.7 4.8
0.38 3.53 4.25 0.41 0.38 0.19
THESE PARTS HAVE BEEN DESIGNED AND DEVELOPED FOR USE WITH TIMKEN BEARINGS ONLY.
TIMKEN PRODUCTS CATALOG B467
•
AUXILIARY PARTS
CUP SHIMS
STANDARD METAL SHIMS FOR CUP ADJUSTMENT BEARINGS
Caption:
and 0.51 mm (0.020 in.) thick.
Shims 0.13 mm (0.005 in.), 0.18 mm (0.007 in.) Without carrier
A
B
With carrier
Carrier section should be equal to average cup wall section.
Cup Shims part number identi?es the following:
Suggested shim sets consist of three
0.13 mm (0.005 in.), three 0.18 mm (0.007 in.), and one 0.51 mm (0.020 in.) thick shims. When ordering, specify the exact quantity for each part number. Shims shown in this table are made
from aluminum, brass, or steel shim stock.
Shim
size thickness(inches)
K2
00 00 example
K2 06 05 covers number 6 shim 0.13 mm (0.005 in.) thick K2 06 07 covers number 6 shim 0.18 mm (0.007 in.) thick K2 06 20 covers number 6 shim 0.51 mm (0.020 in.) thick
DIMENSIONS ARE IN MILLIMETERS / INCHES
DIMENSIONS ARE IN MILLIMETERS / INCHES
Shim Part Numbers Cap Screws
0.13 0.18 0.51
0.005 0.007 0.020 No. Size D1 D2 D3 ra rb
Thick Thick Thick
K23805 K23807 K23820 8 15.7 242.1 273.0 16.8 15.7 7.9
0.62 9.53 10.75 0.66 0.62 0.31 K24005 K24007 K24020 8 19.0 254.8 292.1 19.8 19.0 9.7
0.75 10.03 11.50 0.78 0.75 0.38 K24105 K24107 K24120 8 19.0 267.5 304.8 19.8 19.0 9.7
0.75 10.53 12.00 0.78 0.75 0.38 K24205 K24207 K24220 8 19.0 296.2 333.2 19.8 19.0 9.7
0.75 11.66 13.12 0.78 0.75 0.38 K24405 K24407 K24420 8 19.0 318.3 355.6 19.8 19.0 9.7
0.75 12.53 14.00 0.78 0.75 0.38 K24605 K24607 K24620 8 22.4 343.7 387.4 23.9 22.4 11.2
0.88 13.53 15.25 0.94 0.88 0.44 K24805 K24807 K24820 8 22.4 369.1 412.8 23.9 22.4 11.2
0.88 14.53 16.25 0.94 0.88 0.44 K25005 K25007 K25020 8 25.4 394.5 444.5 26.9 25.4 12.7
1.00 15.53 17.50 1.06 1.00 0.50 K25205 K25207 K25220 8 25.4 419.9 469.9 26.9 25.4 12.7
1.00 16.53 18.50 1.06 1.00 0.50
Shim Part Numbers Cap Screws
0.13 0.18 0.51
0.005 0.007 0.020 No. Size D1 D2 D3 ra rb
Thick Thick Thick
K22505 K22507 K22520 6 15.7 159.5 190.5 16.8 15.7 7.9
0.62 6.28 7.50 0.66 0.62 0.31 K22605 K22607 K22620 6 15.7 165.9 196.8 16.8 15.7 7.9
0.62 6.53 7.75 0.66 0.62 0.31 K22705 K22707 K22720 6 15.7 172.2 203.2 16.8 15.7 7.9
0.62 6.78 8.00 0.66 0.62 0.31 K22905 K22907 K22920 6 15.7 184.9 215.9 16.8 15.7 7.9
0.62 7.28 8.50 0.66 0.62 0.31 K23005 K23007 K23020 6 15.7 191.3 222.2 16.8 15.7 7.9
0.62 7.53 8.75 0.66 0.62 0.31 K23205 K23207 K23220 6 15.7 204.0 235.0 16.8 15.7 7.9
0.62 8.03 9.25 0.66 0.62 0.31 K23405 K23407 K23420 6 15.7 216.7 247.6 16.8 15.7 7.9
0.62 8.53 9.75 0.66 0.62 0.31 K23605 K23607 K23620 6 15.7 229.4 260.4 16.8 15.7 7.9
0.62 9.03 10.25 0.66 0.62 0.31
THESE PARTS HAVE BEEN DESIGNED AND DEVELOPED FOR USE WITH TIMKEN BEARINGS ONLY.
•
B468 TIMKEN PRODUCTS CATALOG
AUXILIARY PARTS
Thrust Bearings
CONE SHIMS
STANDARD METAL SHIMS FOR CONE ADJUSTED BEARINGS
Caption:
A
B
Suggested shim sets consist of three 0.13 mm (0.005 in.), three 0.18 mm (0.007 in.), and one 0.51 mm (0.020 in.) thick shims. When ordering, specify the exact quantity for each part number.
Shims shown in this table are made from aluminum, brass, or steel shim stock.
Shims Shaft Cap Screws
Part Thickness Size No. Size d1 d2 d3 Number
T50614 0.13 127.0
0.005 5.00
T50615 0.18 19.0 88.9 124.0 20.6
0.007 0.75 3.50 4.88 0.81 T50616 0.51 136.7
0.020 5.38 T50617 0.13 139.7
0.005 5.50
T50618 0.18 19.0 88.9 136.7 20.6
0.007 0.75 3.50 5.38 0.81 T50619 0.51 149.4
0.020 5.88 T50620 0.13 152.4
0.005 6.00
T50621 0.18 19.0 101.6 149.4 20.6
0.007 0.75 4.00 5.88 0.81 T50622 0.51 174.8
0.020 6.88 T50623 0.13 177.8
0.005 7.00
T50624 0.18 25.4 127.0 174.8 26.9
0.007 1.00 5.00 6.88 1.06 T50625 0.51 200.2
0.020 7.88 T50626 0.13
0.005
T50627 0.18 203.2 31.8 152.4 200.2 33.3
0.007 8.00 1.25 6.00 7.88 1.31 T50628 0.51
0.020
Shims Shaft Cap Screws
Part Thickness Size No. Size d1 d2 d3 Number
}
}
T50605 0.13 63.5
0.005 2.50
T50606 0.18 12.7 35.1 60.5 14.2
0.007 0.50 1.38 2.38 0.56 T50607 0.51 73.2
0.020 2.88 T50608 0.13 76.2
0.005 3.00
T50609 0.18 12.7 44.4 73.2 14.2
0.007 0.50 1.75 2.88 0.56 T50610 0.51 85.9
0.020 3.38 T50611 0.13 88.9
0.005 3.50
T50612 0.18 12.7 57.2 85.9 14.2
0.007 0.50 2.25 3.38 0.56 T50613 0.51 104.6
0.020 4.12 T45882 0.13 108.0
0.005 4.25
T50633 0.18 15.7 76.2 103.1 17.5
0.007 0.62 3.00 4.06 0.69 T45884 0.51 117.3
0.020 4.62 T45885 0.13 120.6
0.005 4.75
T50634 0.18 15.7 88.9 117.3 17.5
0.007 0.62 3.50 4.62 0.69 T45887 0.51 124.0
0.020 4.88
3
4
to
to
}
}
to
3
4
to
}
}
3
6
to
to
}
}
to
to
3
6
}
to
}
3
6
THESE PARTS HAVE BEEN DESIGNED AND DEVELOPED FOR USE WITH TIMKEN BEARINGS ONLY.
TIMKEN PRODUCTS CATALOG B469
•
AUXILIARY PARTS
LOCKNUTS, LOCKWASHERS AND TONGUED WASHERS STANDARD LOCKNUTS, LOCKWASHERS AND TONGUED WASHER ASSEMBLIES
Caption:
Figure 2
Figure 1
A
B
Figure 3
Figure 4
Figure 5
Figure 6
The designs shown in ?gures 1 to 6 show various methods of using standard locknuts, lockwashers, and tongued washers. A single locknut and lockwasher can be used to clamp the cone against a sleeve, shown in ?gure 1, or directly against a shaft shoulder. A narrow spacer is applied between the front face of the cone and the lockwasher so that the lockwasher will clear the bearing cage by a minimum of 3 mm (0.12 in.). The spacer outside diameter should be made a minimum of 6 mm (0.24 in.) smaller than the cage inside diameter, but must still provide the suggested cone backing diameter. Figure 2 shows another clamped design using a single locknut and lockwasher with a two-row bearing of either type TDO with cone spacer or type TNA. Since no cage clearance problem is present, the narrow spacer shown in ?gure 1 is unnecessary.
Figures 3, 4, and 5 indicate an adjustable bearing arrangement using two locknuts and a lockwasher. These may be used with either single or two-row bearing of the types permitting a cone adjusted arrangement. The design in ?gure 3 allows the maximum shaft extension diameter that can be used with a shaft thread outside diameter, which will be less than the cone bore. Figure 4 shows an alternate design with smaller thread diameter and corresponding smaller locknuts and lockwasher. The locknut outside diameter, minus 2 times “r”, must not be less than the suggested cone backing diameter. Figure 5 indicates the use of a tongued washer located between the inner locknut and cone. This is intended for applications where the cones are applied with loose ?ts on hardened stationary shafts as found in many automotive applications. The hardened tongued washers are not sold by The Timken Company.
When space does not permit the use of two locknuts and a lockwasher in an adjustable arrangement, and a single locknut and a lockwasher is used, then a tongued washer must be placed between the cone and lockwasher as illustrated in ?gure 6. This is necessary to provide adequate backing for the cone, in most cases, and to prevent damage to the lockwasher if the cone should creep on the shaft. The tongued washers are available from The Timken Company.
•
B470 TIMKEN PRODUCTS CATALOG
AUXILIARY PARTS
Thrust Bearings
LOCKNUTS, LOCKWASHERS AND TONGUED WASHERS - METRIC STANDARD LOCKNUTS, LOCKWASHERS AND TONGUED
WASHERS FOR TAPERED ROLLER BEARINGS
Caption:
Figure 3 - TONGUED WASHERS
DIMENSIONS ARE IN MILLIMETERS
A
B
Figure 1 - LOCKNUTS
Figure 2 - LOCKWASHERS
Threads are ISO 965/1, Class 5H
Locknut Dimensions
Lockwasher Dimensions
Tongued Washer Dimensions
Threads
Maximum
Bore
Key
ABMA Minimum Outside Thickness Face ABMA Diameter Face Number
R Outside
Locknut Value of Thread Diameter Outside r Lockwasher Over Diameter Thickness of Tongued
Diameter Thickness S X
Number Major Series
Diameter Number Tangs
Tangs Washer Min. Max.
Diameter C D E B F Q
Number
B Q Max. Min.
KMH2 15.000 M15X1 25.000 8.000 21.000 1.17 MBB2 28.000 21.000 1.41 11 MW2 15.095 15.205 22.000 3.25 4.0 12.195 KMH3 17.000 M17X1 28.000 8.000 24.000 1.17 MBB3 32.000 24.000 1.41 11 MW3 17.095 17.205 24.000 3.25 4.0 14.195 KMH4 20.000 M20X1 32.000 9.000 26.000 1.17 MBB4 36.000 26.000 1.41 11 MW4 20.110 20.240 29.000 3.25 4.0 17.295 KMH4.4 22.000 M22X1 34.000 9.000 28.000 1.17 MBB4.4 38.000 28.000 1.41 11 MW4.4 22.110 22.240 31.000 3.25 4.0 19.710 KMH5 25.000 M25X1.5 38.000 10.000 32.000 1.17 MBB5 42.000 32.000 1.41 13 MW5 25.110 25.240 40.000 3.25 5.0 21.910 KMH5.6 28.000 M28X1.5 42.000 10.000 36.000 1.17 MBB5.6 46.000 36.000 1.41 13 MW5.6 28.110 28.240 40.000 3.25 5.0 24.910 KMH6 30.000 M30X1.5 45.000 10.000 38.000 1.17 MBB6 49.000 38.000 1.41 13 MW6 30.110 30.240 45.000 3.25 5.0 26.910 KMH6.4 32.000 M32X1.5 48.000 11.000 40.000 1.59 MBB6.4 52.000 40.000 1.41 13 MW6.4 32.120 32.280 50.000 3.25 5.0 29.010 KMH7 35.000 M35X1.5 52.000 11.000 44.000 1.59 MBB7 57.000 44.000 1.41 13 MW7 35.120 35.280 52.000 3.25 6.0 31.820 KMH8 40.000 M40X1.5 58.000 11.000 50.000 1.59 MBB8 62.000 50.000 1.78 13 MW8 40.120 40.280 57.000 4.20 6.0 36.520 KMH9 45.000 M45X1.5 65.000 12.000 56.000 1.59 MBB9 69.000 56.000 1.78 13 MW9 45.130 45.290 68.000 4.20 6.0 41.530 KMH10 50.000 M50X1.5 70.000 13.000 61.000 1.59 MBB10 74.000 61.000 1.78 13 MW10 50.130 50.290 76.000 4.20 6.0 46.530 KMH11 55.000 M55X2 75.000 13.000 67.000 1.59 MBB11 81.000 67.000 1.78 17 MW11 55.140 55.330 79.000 4.20 8.0 51.140 KMH12 60.000 M60X2 80.000 14.000 73.000 1.59 MBB12 86.000 73.000 1.78 17 MW12 60.140 60.330 88.000 4.70 8.0 55.940 KMH13 65.000 M65X2 85.000 14.000 79.000 2.38 MBB13 92.000 79.000 1.78 17 MW13 65.140 65.330 90.000 4.70 8.0 60.940 KMH14 70.000 M70X2 92.000 14.000 85.000 2.38 MBB14 98.000 85.000 1.78 17 MW14 70.150 70.340 103.000 4.70 8.0 65.950 KMH15 75.000 M75X2 98.000 15.000 90.000 2.38 MBB15 104.000 90.000 2.24 17 MW15 75.150 75.340 103.000 5.70 8.0 70.550 KM16 80.000 M80X2 105.000 15.000 95.000 2.38 MBB16 112.000 95.000 2.24 17 MW16 80.150 80.340 111.000 5.70 10.0 75.150 KM17 85.000 M85X2 110.000 16.000 102.000 2.38 MBB17 119.000 102.000 2.24 17 MW17 85.170 85.390 116.000 5.70 10.0 80.150 KM18 90.000 M90X2 120.000 16.000 108.000 2.38 MBB18 126.000 108.000 2.73 17 MW18 90.170 90.390 121.000 7.62 10.0 84.670 KM19 95.000 M95X2 125.000 17.000 113.000 3.18 MBB19 133.000 113.000 2.73 17 MW19 95.170 95.390 126.000 7.62 10.0 89.670 KM20 100.000 M100X2 130.000 18.000 120.000 3.18 MBB20 142.000 120.000 2.73 17 MW20 100.170 100.390 131.000 7.62 12.0 94.670 KM21 105.000 M105X2 140.000 18.000 126.000 3.18 MBB21 145.000 126.000 2.73 17 MW21 105.180 105.400 125.000 7.62 12.0 99.670 KM22 110.000 M110X2 145.000 19.000 133.000 3.18 MBB22 154.000 133.000 3.25 17 MW22 110.180 110.400 136.000 7.62 12.0 104.180 KM23 115.000 M115X2 150.000 19.000 137.000 3.18 MBB23 159.000 137.000 3.25 17 MW23 115.180 115.400 144.000 7.62 12.0 109.180 KM24 120.000 M120X2 155.000 20.000 138.000 3.18 MBB24 164.000 138.000 3.72 17 MW24 120.180 120.400 150.000 9.57 14.0 113.180 KM25 125.000 M125X2 160.000 21.000 148.000 3.18 MBB25 170.000 148.000 3.72 17 MW25 125.200 125.450 138.000 9.57 14.0 118.180 KM26 130.000 M130X2 165.000 21.000 149.000 3.18 MBB26 175.000 149.000 3.72 17 MW26 130.200 130.450 166.000 9.57 14.0 123.200
FOR AVAILABILITY OF METRIC LOCKNUTS, LOCKWASHERS, AND TONGUED WASHERS, CONSULT YOUR TIMKEN COMPANY REPRESENTATIVE.
TIMKEN PRODUCTS CATALOG B471
•
AUXILIARY PARTS
LOCKNUTS, LOCKWASHERS AND TONGUED WASHERS - INCHES STANDARD LOCKNUTS, LOCKWASHERS AND TONGUED
WASHERS FOR TAPERED ROLLER BEARINGS
DIMENSIONS ARE IN INCHES
Caption:
Figure 1 - LOCKNUTS
Figure 3 - TONGUED WASHERS
A
B
Figure 2 - LOCKWASHERS
Threads are American National, Form NS, Class 3, with thread length based on 45° chamfer.
Locknut Dimensions
Lockwasher Dimensions
Tongued Washer Dimensions
Threads
Maximum
Bore
Key
ABMA Minimum Outside Thickness Face ABMA Diameter Face Number
R Outside
Locknut Value of Thread Diameter Outside r Lockwasher Over Diameter Thickness of Tongued
Diameter Thickness S X
Number Major Series
Diameter Number Tangs
Tangs Washer Min. Max.
Diameter C D E B F Q
Number
B Q Max. Min.
N-00 0.391 32 0.755 0.229 0.625 0.047 TW100 0.891 0.625 0.032 9 K91500 0.406 0.421 0.798 0.109 0.120 0.334 N-01 0.469 32 0.880 0.323 0.719 0.047 TW101 1.031 0.719 0.032 9 K91501 0.484 0.499 0.923 0.109 0.120 0.412 N-02 0.586 32 1.005 0.323 0.813 0.047 TW102 1.156 0.813 0.048 11 K91502 0.601 0.616 1.173 0.125 0.120 0.513 N-03 0.664 32 1.130 0.354 0.938 0.047 TW103 1.344 0.938 0.048 11 K91503 0.679 0.694 1.173 0.125 0.120 0.591 N-04 0.781 32 1.380 0.385 1.125 0.047 TW104 1.563 1.125 0.052 11 K91504 0.801 0.816 1.423 0.125 0.176 0.713 N-05 0.969 32 1.568 0.416 1.281 0.047 TW105 1.703 1.281 0.052 13 K91505 0.989 1.009 1.860 0.125 0.176 0.897 N-06 1.173 18 1.755 0.416 1.500 0.047 TW106 1.953 1.500 0.052 13 K91506 1.193 1.213 1.860 0.125 0.176 1.081 TN-065 1.312 18 2.068 0.448 1.813 0.063 TW065 2.234 1.813 0.052 15 K915065 1.333 1.353 2.173 0.125 0.176 1.221 TN-07 1.376 18 2.068 0.448 1.813 0.063 TW107 2.250 1.813 0.052 15 K91507 1.396 1.416 2.173 0.125 0.176 1.284 TN-08 1.563 18 2.255 0.448 2.000 0.063 TW108 2.484 2.000 0.062 15 K91508 1.583 1.603 2.735 0.156 0.290 1.461 TN-09 1.767 18 2.536 0.448 2.281 0.063 TW109 2.719 2.281 0.062 17 K91509 1.792 1.817 2.735 0.156 0.290 1.670 TN-10 1.967 18 2.693 0.510 2.438 0.063 TW110 2.922 2.438 0.062 17 K91510 1.992 2.017 3.235 0.156 0.290 1.870 TN-11 2.157 18 2.974 0.510 2.656 0.063 TW111 3.094 2.656 0.062 17 K91511 2.182 2.207 3.235 0.156 0.290 2.060 TN-12 2.360 18 3.161 0.541 2.844 0.063 TW112 3.328 2.844 0.072 17 K91512 2.400 2.425 3.735 0.187 0.290 2.248 TN-13 2.548 18 3.380 0.573 3.063 0.094 TW113 3.563 3.063 0.072 19 K91513 2.588 2.613 3.735 0.187 0.290 2.436 TN-14 2.751 18 3.360 0.573 3.313 0.094 TW114 3.813 3.313 0.072 19 K91514 2.791 2.816 3.735 0.187 0.290 2.639 TAN-15 2.933 12 3.880 0.604 3.563 0.094 TW115 4.047 3.563 0.085 19 K91515 2.973 3.003 4.173 0.218 0.290 2.808 TAN-16 3.137 12 4.161 0.604 3.844 0.094 TW116 4.391 3.844 0.085 19 K91516 3.177 3.207 4.173 0.218 0.353 3.012 TAN-17 3.340 12 4.411 0.635 4.031 0.094 TW117 4.625 4.031 0.085 19 K91517 3.395 3.425 4.610 0.218 0.353 3.230 TAN-18 3.527 12 4.661 0.698 4.281 0.094 TW118 4.953 4.281 0.115 19 K91518 3.582 3.612 5.110 0.250 0.353 3.387 TAN-19 3.730 12 4.943 0.729 4.563 0.125 TW119 5.234 4.563 0.115 19 K91519 3.800 3.830 5.110 0.250 0.353 3.605 TAN-20 3.918 12 5.193 0.760 4.813 0.125 TW120 5.484 4.813 0.115 19 K91520 3.988 4.018 5.610 0.250 0.353 3.778 TAN-21 4.122 12 5.443 0.760 5.000 0.125 TW121 5.703 5.000 0.115 19 K91521 4.192 4.222 5.610 0.250 0.353 3.982 TAN-22 4.325 12 5.724 0.791 5.281 0.125 TW122 6.000 5.281 0.130 19 K91522 4.395 4.425 6.110 0.281 0.353 4.170 TAN-24 4.716 12 6.130 0.823 5.688 0.125 TW124 6.531 5.688 0.155 19 K91524 4.801 4.831 6.735 0.375 0.353 4.551 TAN-26 5.106 12 6.755 0.885 6.188 0.125 TW126 7.047 6.188 0.155 19 K91526 5.191 5.226 7.485 0.375 0.435 4.921 TAN-128 5.497 12 7.099 1.198 6.531 0.125 TW128 7.438 6.531 0.155 19 K91528 5.582 5.617 7.485 0.375 0.590 5.312 TAN-130 5.888 12 7.693 1.260 7.063 0.125 TW130 8.063 7.063 0.193 19 K91530 5.983 6.018 7.985 0.375 0.590 5.675 TAN-132 6.284 8 8.068 1.291 7.438 0.156 TW132 8.453 7.438 0.193 19 K91532 6.389 6.424 8.485 0.375 0.590 6.081 TAN-134 6.659 8 8.661 1.354 8.031 0.156 TW134 9.078 8.031 0.193 19 K91534 6.764 6.799 8.985 0.375 0.715 6.456 TAN-136 7.066 8 9.068 1.416 8.375 0.156 TW136 9.438 8.375 0.193 19 K91536 7.171 7.206 9.235 0.375 0.715 6.863 TAN-138 7.472 8 9.474 1.416 8.781 0.156 TW138 9.859 8.781 0.193 19 K91538 7.577 7.612 9.735 0.375 0.715 7.269 TAN-140 7.847 8 9.849 1.510 9.156 0.156 TW140 10.406 9.156 0.193 19 K91540 7.982 8.017 10.110 0.375 0.840 7.674
•
B472 TIMKEN PRODUCTS CATALOG
AUXILIARY PARTS
Thrust Bearings
LOCKNUTS, LOCKWASHERS AND TONGUED WASHERS SHAFT THREAD AND KEYWAY DIMENSIONS FOR STANDARD LOCKNUTS, LOCKWASHERS AND TONGUED WASHERS
These dimensions are ABMA standards.
ABMA Number
Locknut Per Major Diameter
Number Inch
Caption:
Keyway
Relief Relief Ext. Length Depth Width
DIMENSIONS ARE IN INCHES
A
B
threads
Shaft Thread
Minor Diameter Width Dia.
Pitch Diameter Dia. A W V2 L1 L2 H S M U
(1)
+0.016 +0.016 +0.016 +0.016 +0.016 +0.016 Max. Tol. Min. Max. Tol. Min. Max.
0.000 Max. -0.000 -0.000 Max. -0.000 0.000 -0.000
N-00 32 0.391 0.0054 0.3856 0.3707 0.0026 0.3681 0.3257 0.3371 ± 0.005 0.062 0.312 0.593 0.375 0.287 0.125 0.094 0.469 N-01 32 0.469 0.0054 0.4636 0.4487 0.0026 0.4461 0.4307 0.4151 ± 0.005 0.062 0.406 0.781 0.468 0.366 0.125 0.094 0.562 N-02 32 0.586 0.0054 0.5806 0.5657 0.0030 0.5627 0.5477 0.5321 ± 0.005 0.062 0.500 0.812 0.500 0.485 0.125 0.094 0.594 N-03 32 0.664 0.0054 0.6586 0.6437 0.0030 0.6407 0.6257 0.6101 ± 0.005 0.062 0.562 0.875 0.531 0.564 0.125 0.094 0.625 N-04 32 0.781 0.0054 0.7756 0.7607 0.0034 0.7573 0.7427 0.7271 ± 0.005 0.062 0.703 0.906 0.531 0.676 0.188 0.094 0.625 N-05 32 0.969 0.0054 0.9636 0.9487 0.0034 0.9453 0.9307 0.9151 ± 0.005 0.062 0.875 1.000 0.593 0.835 0.188 0.125 0.719 N-06 18 1.173 0.0082 1.1648 1.1369 0.0040 1.1329 1.1048 1.0892 ± 0.005 0.093 1.062 1.000 0.593 1.040 0.188 0.125 0.719 TN-065 18 1.312 0.0082 1.3043 1.2764 0.0040 1.2724 1.2443 1.2287 ± 0.005 0.093 1.188 1.062 0.625 1.180 0.188 0.125 0.750 TN-07 18 1.376 0.0082 1.3678 1.3399 0.0040 1.3359 1.3078 1.2922 ± 0.005 0.093 1.250 1.062 0.625 1.244 0.188 0.125 0.750 TN-08 18 1.563 0.0082 1.5548 1.5269 0.0045 1.5224 1.4948 1.4792 ± 0.005 0.093 1.438 1.062 0.625 1.422 0.312 0.125 0.750 TN-09 18 1.767 0.0082 1.7588 1.7309 0.0045 1.7264 1.6988 1.6832 ± 0.005 0.125 1.656 1.062 0.625 1.628 0.312 0.156 0.781 TN-10 18 1.967 0.0082 1.9588 1.9309 0.0045 1.9264 1.8988 1.8832 ± 0.005 0.125 1.859 1.187 0.687 1.830 0.312 0.156 0.844 TN-11 18 2.157 0.0082 2.1488 2.1209 0.0051 2.1158 2.0888 2.0732 ± 0.005 0.125 2.047 1.187 0.687 2.021 0.312 0.156 0.844 TN-12 18 2.360 0.0082 2.3518 2.3239 0.0051 2.3188 2.2918 2.2762 ± 0.005 0.125 2.250 1.281 0.750 2.194 0.312 0.156 0.906 TN-13 18 2.548 0.0082 2.5398 2.5119 0.0051 2.5068 2.4798 2.4642 ± 0.005 0.125 2.422 1.343 0.781 2.382 0.312 0.156 0.938 TN-14 18 2.751 0.0082 2.7428 2.7149 0.0051 2.7098 2.6828 2.6672 ± 0.005 0.125 2.625 1.343 0.781 2.586 0.312 0.250 1.000 TAN-15 12 2.933 0.0112 2.9218 2.8789 0.0054 2.8735 2.8308 2.7995 ± ‘0.010 0.156 2.781 1.406 0.812 2.737 0.312 0.250 1.031 TAN-16 12 3.137 0.0112 3.1258 3.0829 0.0059 3.0770 3.0348 3.0035 ± 0.010 0.156 3.000 1.406 0.812 2.938 0.375 0.250 1.031 TAN-17 12 3.340 0.0112 3.3288 3.2859 0.0059 3.2800 3.2378 3.2065 ± 0.010 0.156 3.188 1.468 0.843 3.141 0.375 0.250 1.062 TAN-18 12 3.527 0.0112 3.5158 3.4729 0.0074 3.4655 3.4248 3.3935 ± 0.010 0.156 3.375 1.625 0.937 3.298 0.375 0.250 1.156 TAN-19 12 3.730 0.0112 3.7188 3.6759 0.0074 3.6685 3.6278 3.5965 ± 0.010 0.156 3.562 1.687 0.968 3.502 0.375 0.250 1.188 TAN-20 12 3.918 0.0112 3.9068 3.8639 0.0074 3.8565 3.8158 3.7845 ± 0.010 0.156 3.766 1.750 1.000 3.690 0.375 0.312 1.281 TAN-21 12 4.122 0.0112 4.1108 4.0679 0.0083 4.0596 4.0198 3.9885 ± 0.010 0.156 3.938 1.750 1.000 3.894 0.375 0.312 1.281 TAN-22 12 4.325 0.0112 4.3138 4.2709 0.0083 4.2626 4.2228 4.1915 ± 0.010 0.156 4.156 1.812 1.031 4.098 0.375 0.312 1.312 TAN-24 12 4.716 0.0112 4.7048 4.6619 0.0083 4.6536 4.6138 4.5825 ± 0.010 0.156 4.531 1.906 1.093 4.458 0.375 0.312 1.375 TAN-26 12 5.106 0.0112 5.0948 5.0519 0.0083 5.0436 5.0038 4.9725 ± 0.010 0.156 4.906 2.031 1.156 4.844 0.500 0.312 1.438 TAN-128 12 5.497 0.0112 5.4858 5.4429 0.0083 5.4346 5.3948 5.3635 ± 0.010 0.156 5.297 2.656 1.468 5.229 0.625 0.312 1.750 TAN-130 12 5.888 0.01125 5.8768 5.8339 0.0083 5.8256 5.7858 5.7545 ± 0.010 0.156 5.656 2.812 1.562 5.590 0.625 0.375 1.906 TAN-132 8 6.284 0.0152 6.2688 6.2028 0.0091 6.1937 6.1306 6.0993 ± 0.010 0.250 6.062 2.875 1.593 5.956 0.625 0.375 1.938 TAN-134 8 6.659 0.0152 6.6438 6.5778 0.0091 6.5687 6.5056 6.4743 ± 0.010 0.250 6.438 3.000 1.656 6.326 0.750 0.375 2.000 TAN-136 8 7.066 0.0152 7.0508 6.9848 0.0091 6.9757 6.9126 6.8813 ± 0.010 0.250 6.844 3.125 1.718 6.734 0.750 0.375 2.062 TAN-138 8 7.472 0.0152 7.4568 7.3908 0.0091 7.3817 7.3186 7.2873 ± 0.010 0.250 7.250 3.125 1.718 7.141 0.750 0.375 2.062 TAN-140 8 7.847 0.0152 7.8318 7.7658 0.0114 7.7544 7.6936 7.6623 ± 0.010 0.250 7.625 3.312 1.812 7.510 0.875 0.375 2.125
TIMKEN PRODUCTS CATALOG B473
•
AUXILIARY PARTS
NOTES
A
B
•
B474 TIMKEN PRODUCTS CATALOG
