PDF associated: /PT 70-79-0002.pdf

---

REPROGRAMMING JDA3316 PT 70 79 0002 Chrysler VIN Programming Case Matters All Chrysler Flash ECM s requiring VIN programming After replacing the ECM the ABS light stays on or codes for ABS Air Bag or bad VIN 84 get set Incorrect VIN is stored in ECM memory The correct vehicle VIN must be programmed into the replacement ECM Additionally the VIN must be entered in with UPPER CASE letters see the following example Incorrect 1b7kf23z0wj243517 Correct 1B7KF23Z0WJ243517 Use the Flash2 All Makes Reprogrammer to set and verify the programmed VIN as follows Problem Cause Solution Application 2 Type VIN in SET field BE SURE TO TYPE IN UPPER CASE Select SET VIN 1 Start Flash2 All Makes Reprogrammer select Chrysler select Reprogram ECM and then select Modify VIN 3 The message Set VIN Successful should be received Select OK 4 Select GET VIN The VIN number returned must match number entered If unreadable characters are returned check for correct number of digits and correct VIN If necessary correct VIN and repeat steps 2 3 and 4